From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Wed, 4 May 2016 19:47:10 +0000 (-0700)
Subject: staging: comedi: dt2811: tidy up A/D Gain/Channel register defines
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b99c859b8fc3db534c7ef7700c1627d0e3df4dbe;p=openwrt%2Fstaging%2Fblogic.git

staging: comedi: dt2811: tidy up A/D Gain/Channel register defines

Cleanup the defines for this register and its bits and remove the
redundant information in the comment.

Make the (*insn_read) use the range to set the gain bits correctly.
Currently the gain is always set to 1.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c
index 433cfd136046..f72d6c8001ed 100644
--- a/drivers/staging/comedi/drivers/dt2811.c
+++ b/drivers/staging/comedi/drivers/dt2811.c
@@ -63,6 +63,10 @@
 /* continuous conversion, external clock, external trigger */
 #define DT2811_ADCSR_ADMODE_EXT		DT2811_ADCSR_ADMODE(3)
 
+#define DT2811_ADGCR_REG		0x01	/* r/w  A/D Gain/Channel */
+#define DT2811_ADGCR_GAIN(x)		(((x) & 0x3) << 6)
+#define DT2811_ADGCR_CHAN(x)		(((x) & 0xf) << 0)
+
 static const struct comedi_lrange range_dt2811_pgh_ai_5_unipolar = {
 	4, {
 		UNI_RANGE(5),
@@ -119,16 +123,6 @@ static const struct comedi_lrange range_dt2811_pgl_ai_5_bipolar = {
 
 /*
 
-   0x01    ADGCR R/W A/D Gain/Channel Register
-   bit 6,7 - (R/W) gain select
-   00  gain=1, both PGH, PGL models
-   01  gain=2 PGH, 10 PGL
-   10  gain=4 PGH, 100 PGL
-   11  gain=8 PGH, 500 PGL
-   bit 4,5 - reserved
-   bit 3-0 - (R/W) channel select
-   channel number from 0-15
-
    0x02,0x03 (R) ADDAT A/D Data Register
    (W) DADAT0 D/A Data Register 0
    0x02 low byte
@@ -166,7 +160,6 @@ static const struct comedi_lrange range_dt2811_pgl_ai_5_bipolar = {
 
 #define TIMEOUT 10000
 
-#define DT2811_ADGCR 1
 #define DT2811_ADDATLO 2
 #define DT2811_ADDATHI 3
 #define DT2811_DADAT0LO 2
@@ -219,12 +212,15 @@ static int dt2811_ai_eoc(struct comedi_device *dev,
 static int dt2811_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data)
 {
-	int chan = CR_CHAN(insn->chanspec);
+	unsigned int chan = CR_CHAN(insn->chanspec);
+	unsigned int range = CR_RANGE(insn->chanspec);
 	int ret;
 	int i;
 
 	for (i = 0; i < insn->n; i++) {
-		outb(chan, dev->iobase + DT2811_ADGCR);
+		/* select channel/gain and trigger conversion */
+		outb(DT2811_ADGCR_CHAN(chan) | DT2811_ADGCR_GAIN(range),
+		     dev->iobase + DT2811_ADGCR_REG);
 
 		ret = comedi_timeout(dev, s, insn, dt2811_ai_eoc, 0);
 		if (ret)