From: Stephen Hemminger Date: Thu, 15 May 2008 00:04:15 +0000 (-0700) Subject: sky2: split phy power into two functions X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b96936da7a8911cfa29225aa4dc380aba1b8a86e;p=openwrt%2Fstaging%2Fblogic.git sky2: split phy power into two functions Later changes add more code to PHY power changes so refactor now. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 535f6cc96c8d..ad35674ba838 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -619,28 +619,35 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); } -static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff) +static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD }; +static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA }; + +static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port) { u32 reg1; - static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD }; - static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA }; sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); - /* Turn on/off phy power saving */ - if (onoff) - reg1 &= ~phy_power[port]; - else - reg1 |= phy_power[port]; + reg1 &= ~phy_power[port]; - if (onoff && hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) reg1 |= coma_mode[port]; sky2_pci_write32(hw, PCI_DEV_REG1, reg1); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); sky2_pci_read32(hw, PCI_DEV_REG1); +} + +static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port) +{ + u32 reg1; + + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); + reg1 |= phy_power[port]; - udelay(100); + sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } /* Force a renegotiation */ @@ -675,8 +682,11 @@ static void sky2_wol_init(struct sky2_port *sky2) sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full); sky2->flow_mode = FC_NONE; - sky2_phy_power(hw, port, 1); - sky2_phy_reinit(sky2); + + spin_lock_bh(&sky2->phy_lock); + sky2_phy_power_up(hw, port); + sky2_phy_init(hw, port); + spin_unlock_bh(&sky2->phy_lock); sky2->flow_mode = save_mode; sky2->advertising = ctrl; @@ -781,6 +791,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK); spin_lock_bh(&sky2->phy_lock); + sky2_phy_power_up(hw, port); sky2_phy_init(hw, port); spin_unlock_bh(&sky2->phy_lock); @@ -1385,8 +1396,6 @@ static int sky2_up(struct net_device *dev) if (!sky2->rx_ring) goto err_out; - sky2_phy_power(hw, port, 1); - sky2_mac_init(hw, port); /* Register is number of 4K blocks on internal RAM buffer. */ @@ -1767,7 +1776,7 @@ static int sky2_down(struct net_device *dev) sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); - sky2_phy_power(hw, port, 0); + sky2_phy_power_down(hw, port); netif_carrier_off(dev);