From: Jens Muecke Date: Tue, 19 Feb 2008 04:03:49 +0000 (+0000) Subject: Adding .24 support for olpc X-Git-Tag: reboot~27005 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b926d7695baa0e000103371401d0f4878a08c8cd;p=openwrt%2Fstaging%2Fchunkeey.git Adding .24 support for olpc kernel compiles fine, but graphic support is broken to test new kernel version, change target/linux/olpc/Makefile from .23.16 to .24 SVN-Revision: 10493 --- diff --git a/target/linux/olpc/config-2.6.24 b/target/linux/olpc/config-2.6.24 new file mode 100644 index 0000000000..41cee4ba49 --- /dev/null +++ b/target/linux/olpc/config-2.6.24 @@ -0,0 +1,2219 @@ +# CONFIG_4KSTACKS is not set +# CONFIG_60XX_WDT is not set +# CONFIG_64BIT is not set +# CONFIG_6PACK is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_9P_FS is not set +# CONFIG_ACENIC is not set +# CONFIG_ACORN_PARTITION is not set +# CONFIG_ACPI is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_ADFS_FS is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_AFFS_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_AGP is not set +# CONFIG_AIRO is not set +CONFIG_AIRO_CS=m +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_AMIGA_PARTITION is not set +CONFIG_ANON_INODES=y +# CONFIG_APM is not set +# CONFIG_APPLICOM is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SUPPORTS_MSI=y +CONFIG_ARCH_SUPPORTS_OPROFILE=y +# CONFIG_ARCNET is not set +CONFIG_ARPD=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_ATA is not set +# CONFIG_ATALK is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_ATL1 is not set +# CONFIG_ATM is not set +CONFIG_ATMEL=m +# CONFIG_ATM_AMBASSADOR is not set +CONFIG_ATM_BR2684=m +CONFIG_ATM_BR2684_IPFILTER=y +CONFIG_ATM_CLIP=m +CONFIG_ATM_CLIP_NO_ICMP=y +# CONFIG_ATM_DRIVERS is not set +CONFIG_ATM_DUMMY=m +# CONFIG_ATM_ENI is not set +# CONFIG_ATM_FIRESTREAM is not set +# CONFIG_ATM_FORE200E_MAYBE is not set +# CONFIG_ATM_HE is not set +# CONFIG_ATM_HORIZON is not set +# CONFIG_ATM_IA is not set +# CONFIG_ATM_IDT77252 is not set +# CONFIG_ATM_LANAI is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +# CONFIG_ATM_NICSTAR is not set +CONFIG_ATM_TCP=m +# CONFIG_ATM_ZATM is not set +# CONFIG_AUDIT is not set +# CONFIG_AUDIT_ARCH is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AX25=m +# CONFIG_AX25_DAMA_SLAVE is not set +# CONFIG_AX88796 is not set +# CONFIG_B44 is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_BACKLIGHT_PROGEAR is not set +CONFIG_BASE_FULL=y +CONFIG_BASE_SMALL=0 +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BATTERY_DS2760 is not set +CONFIG_BATTERY_OLPC=y +# CONFIG_BAYCOM_EPP is not set +# CONFIG_BAYCOM_PAR is not set +# CONFIG_BAYCOM_SER_FDX is not set +# CONFIG_BAYCOM_SER_HDX is not set +CONFIG_BCM43XX=m +CONFIG_BCM43XX_DEBUG=y +CONFIG_BCM43XX_DMA=y +CONFIG_BCM43XX_DMA_AND_PIO_MODE=y +# CONFIG_BCM43XX_DMA_MODE is not set +CONFIG_BCM43XX_PIO=y +# CONFIG_BCM43XX_PIO_MODE is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_BITREVERSE=y +# CONFIG_BLINK is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_CPQ_DA is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_CMD640 is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_CS5535 is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_DELKIN is not set +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_BLK_DEV_HD_IDE is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_BLK_DEV_IDEPNP is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_RZ1000 is not set +# CONFIG_BLK_DEV_SC1200 is not set +CONFIG_BLK_DEV_SD=y +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLOCK=y +# CONFIG_BNX2 is not set +# CONFIG_BONDING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +CONFIG_BOUNCE=y +# CONFIG_BPQETHER is not set +CONFIG_BRIDGE=y +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_VLAN=m +# CONFIG_BRIDGE_NETFILTER is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +CONFIG_BROKEN_ON_SMP=y +CONFIG_BSD_DISKLABEL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_BT is not set +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +# CONFIG_BT_CMTP is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBFUSB=m +# CONFIG_BT_HCIBLUECARD is not set +CONFIG_BT_HCIBPA10X=m +# CONFIG_BT_HCIBT3C is not set +# CONFIG_BT_HCIBTUART is not set +# CONFIG_BT_HCIDTL1 is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +CONFIG_BT_HCIVHCI=m +CONFIG_BT_HIDP=m +CONFIG_BT_L2CAP=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_SCO=m +CONFIG_BUG=y +# CONFIG_CAPI_AVM is not set +# CONFIG_CAPI_EICON is not set +# CONFIG_CAPI_TRACE is not set +CONFIG_CARDBUS=y +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_CASSINI is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_CFG80211=m +# CONFIG_CGROUPS is not set +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_CIFS is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_CLS_U32_MARK=y +CONFIG_CLS_U32_PERF=y +CONFIG_CMDLINE="" +# CONFIG_CODA_FS is not set +CONFIG_COMPAT_VDSO=y +CONFIG_CONFIGFS_FS=y +# CONFIG_CONNECTOR is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set +# CONFIG_CRAMFS is not set +CONFIG_CRC16=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_CRC_CCITT=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CROSSCOMPILE=y +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_AES_586 is not set +CONFIG_CRYPTO_ALGAPI=m +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_HASH=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set +CONFIG_CRYPTO_TWOFISH_COMMON=m +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CS5535_GPIO is not set +# CONFIG_DAB is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_DCDBAS is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RODATA is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DECNET is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_BIC is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_CUBIC is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_HTCP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_DEFAULT_NOOP is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="vegas" +CONFIG_DEFAULT_VEGAS=y +# CONFIG_DEFAULT_WESTWOOD is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +# CONFIG_DELL_RBU is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DEVFS_DEBUG is not set +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +CONFIG_DEVPORT=y +# CONFIG_DGRS is not set +# CONFIG_DISABLE_SUSPEND_VT_SWITCH is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_DISPLAY_SUPPORT=y +# CONFIG_DL2K is not set +# CONFIG_DLM is not set +# CONFIG_DMADEVICES is not set +# CONFIG_DMA_ENGINE is not set +CONFIG_DMI=y +CONFIG_DMIID=y +CONFIG_DNOTIFY=y +CONFIG_DOUBLEFAULT=y +CONFIG_DRM=y +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DS1682 is not set +# CONFIG_DTLK is not set +# CONFIG_DUMMY is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_E100 is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_ECONET is not set +# CONFIG_EDAC is not set +# CONFIG_EDD is not set +# CONFIG_EEPRO100 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_EFS_FS is not set +CONFIG_ELF_CORE=y +CONFIG_EMBEDDED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_EPIC100 is not set +CONFIG_EPOLL=y +# CONFIG_EQUALIZER is not set +# CONFIG_EUROTECH_WDT is not set +CONFIG_EVENTFD=y +CONFIG_EXPERIMENTAL=y +CONFIG_EXPORTFS=m +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_FAIR_GROUP_SCHED is not set +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_FAT_FS=m +# CONFIG_FAULT_INJECTION is not set +CONFIG_FB=y +# CONFIG_FB_3DFX is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_EFI is not set +CONFIG_FB_GEODE=y +CONFIG_FB_GEODE_GX=y +CONFIG_FB_GEODE_GX1=y +CONFIG_FB_GEODE_LX=y +# CONFIG_FB_HECUBA is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_I810 is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_NVIDIA is not set +CONFIG_FB_OLPC_DCON=y +# CONFIG_FB_PM2 is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_VESA is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FDDI is not set +# CONFIG_FEALNX is not set +CONFIG_FIB_RULES=y +# CONFIG_FIREWIRE is not set +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_FLATMEM=y +CONFIG_FLATMEM_MANUAL=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x16=y +CONFIG_FONT_8x8=y +# CONFIG_FORCEDETH is not set +CONFIG_FORCED_INLINING=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FRAME_POINTER is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_FTL is not set +# CONFIG_FUSE_FS is not set +# CONFIG_FUSION is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set +# CONFIG_FUSION_SPI is not set +CONFIG_FUTEX=y +CONFIG_FW_LOADER=y +CONFIG_GACT_PROB=y +# CONFIG_GAMEPORT is not set +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +# CONFIG_GENERIC_CPU is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_TIME=y +# CONFIG_GENERIC_TIME_VSYSCALL is not set +CONFIG_GEODE_MFGPT_TIMER=y +# CONFIG_GFS2_FS is not set +# CONFIG_GPIO_DEVICE is not set +# CONFIG_HAMACHI is not set +# CONFIG_HAMRADIO is not set +# CONFIG_HANGCHECK_TIMER is not set +# CONFIG_HAPPYMEAL is not set +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_HERMES is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_HFS_FS is not set +CONFIG_HIBERNATION=y +CONFIG_HIBERNATION_UP_POSSIBLE=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_DEBUG is not set +# CONFIG_HID_FF is not set +CONFIG_HID_SUPPORT=y +# CONFIG_HIGHMEM4G is not set +# CONFIG_HIGHMEM64G is not set +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_HIPPI is not set +# CONFIG_HOSTAP is not set +# CONFIG_HOSTAP_CS is not set +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_PCI=m +CONFIG_HOSTAP_PLX=m +CONFIG_HOTPLUG=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HP100 is not set +# CONFIG_HPET_TIMER is not set +# CONFIG_HPFS_FS is not set +CONFIG_HT_IRQ=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set +CONFIG_HW_CONSOLE=y +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_AMD is not set +CONFIG_HW_RANDOM_GEODE=y +# CONFIG_HW_RANDOM_INTEL is not set +CONFIG_HW_RANDOM_VIA=y +CONFIG_HZ=100 +CONFIG_HZ_100=y +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +# CONFIG_HZ_128 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_48 is not set +CONFIG_I2C=y +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCA is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_ELEKTOR is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2O is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_I82092 is not set +# CONFIG_I8K is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_IBM_ASM is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_IDE is not set +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_IDEPCI_SHARE_IRQ is not set +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_IDE_PROC_FS=y +# CONFIG_IDE_TASK_IOCTL is not set +# CONFIG_IEEE1394 is not set +# CONFIG_IEEE80211 is not set +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_IFB=m +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_IMQ=m +# CONFIG_IMQ_BEHAVIOR_AA is not set +# CONFIG_IMQ_BEHAVIOR_AB is not set +CONFIG_IMQ_BEHAVIOR_BA=y +# CONFIG_IMQ_BEHAVIOR_BB is not set +CONFIG_IMQ_NUM_DEVS=2 +CONFIG_INET=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET_AH is not set +CONFIG_INET_DIAG=m +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_TCP_DIAG=m +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INFINIBAND is not set +# CONFIG_INFTL is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INIT_ENV_ARG_LIMIT=32 +# CONFIG_INOTIFY is not set +# CONFIG_INOTIFY_USER is not set +CONFIG_INPUT=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_MOUSE=y +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_WISTRON_BTNS is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_NOOP=y +# CONFIG_IP1000 is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_LIMIT=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_IMQ=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_ROUTE=m +# CONFIG_IPC_NS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_IPSEC_NAT_TRAVERSAL=y +# CONFIG_IPV6 is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_IPV6_PRIVACY is not set +CONFIG_IPV6_ROUTER_PREF=y +# CONFIG_IPV6_ROUTE_INFO is not set +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2100_DEBUG is not set +CONFIG_IPW2100_MONITOR=y +# CONFIG_IPW2200 is not set +# CONFIG_IPW2200_DEBUG is not set +CONFIG_IPW2200_MONITOR=y +# CONFIG_IPW2200_PROMISCUOUS is not set +# CONFIG_IPW2200_QOS is not set +# CONFIG_IPW2200_RADIOTAP is not set +# CONFIG_IPX is not set +CONFIG_IP_ADVANCED_ROUTER=y +# CONFIG_IP_DCCP is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +# CONFIG_IP_MROUTE is not set +CONFIG_IP_MULTICAST=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_ARPFILTER=m +# CONFIG_IP_NF_ARPTABLES is not set +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_IP_NF_CONNTRACK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_H323=m +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_MANGLE=y +CONFIG_IP_NF_MATCH_ADDRTYPE=m +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_IPP2P is not set +CONFIG_IP_NF_MATCH_IPRANGE=m +# CONFIG_IP_NF_MATCH_OWNER is not set +# CONFIG_IP_NF_MATCH_RECENT is not set +CONFIG_IP_NF_MATCH_SET=m +# CONFIG_IP_NF_MATCH_TIME is not set +# CONFIG_IP_NF_MATCH_TOS is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_NAT=y +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_H323=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_SIP=m +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_TFTP=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_PPTP=m +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_SET is not set +CONFIG_IP_NF_SET_HASHSIZE=1024 +CONFIG_IP_NF_SET_IPHASH=m +CONFIG_IP_NF_SET_IPMAP=m +CONFIG_IP_NF_SET_IPPORTHASH=m +CONFIG_IP_NF_SET_IPTREE=m +CONFIG_IP_NF_SET_IPTREEMAP=m +CONFIG_IP_NF_SET_MACIPMAP=m +CONFIG_IP_NF_SET_MAX=256 +CONFIG_IP_NF_SET_NETHASH=m +CONFIG_IP_NF_SET_PORTMAP=m +CONFIG_IP_NF_SIP=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_IMQ is not set +# CONFIG_IP_NF_TARGET_LOG is not set +CONFIG_IP_NF_TARGET_MASQUERADE=y +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_ROUTE=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_TARGET_SET=m +# CONFIG_IP_NF_TARGET_TOS is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_IP_NF_TFTP=m +# CONFIG_IP_PNP is not set +CONFIG_IP_ROUTE_FWMARK=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_MULTIPATH_CACHED=y +CONFIG_IP_ROUTE_MULTIPATH_DRR=m +CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m +CONFIG_IP_ROUTE_MULTIPATH_RR=m +CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_SCTP is not set +# CONFIG_IP_VS is not set +# CONFIG_IRDA is not set +# CONFIG_ISA is not set +CONFIG_ISA_DMA_API=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_ISDN is not set +CONFIG_ISDN_CAPI=m +CONFIG_ISDN_CAPI_CAPI20=m +CONFIG_ISDN_CAPI_CAPIFS=m +CONFIG_ISDN_CAPI_CAPIFS_BOOL=y +CONFIG_ISDN_CAPI_MIDDLEWARE=y +# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set +# CONFIG_ISDN_I4L is not set +# CONFIG_ISO9660_FS is not set +# CONFIG_IT8712F_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_IXGB is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS_FS is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_FS is not set +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_JOLIET=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_KEXEC=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYS is not set +CONFIG_KMOD=y +# CONFIG_KPROBES is not set +CONFIG_KTIME_SCALAR=y +# CONFIG_KVM is not set +# CONFIG_LAPB is not set +# CONFIG_LASAT is not set +# CONFIG_LBD is not set +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LDM_PARTITION is not set +# CONFIG_LEDS_ALIX is not set +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +# CONFIG_LEDS_TRIGGER_MORSE is not set +CONFIG_LEDS_TRIGGER_TIMER=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_LGUEST is not set +CONFIG_LIBCRC32C=m +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_USB is not set +CONFIG_LLC=y +CONFIG_LLC2=m +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_LOCKD=m +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_LOCKD_V4=y +# CONFIG_LOCK_STAT is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_LSF is not set +# CONFIG_LXT_PHY is not set +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586MMX is not set +# CONFIG_M586TSC is not set +# CONFIG_M686 is not set +# CONFIG_MAC80211 is not set +# CONFIG_MAC80211_DEBUG is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_MACINTOSH_DRIVERS is not set +# CONFIG_MACVLAN is not set +# CONFIG_MAC_EMUMOUSEBTN is not set +CONFIG_MAC_PARTITION=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_MARKEINS is not set +# CONFIG_MARKERS is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_MCA is not set +# CONFIG_MCORE2 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MD is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MGEODEGX1 is not set +CONFIG_MGEODE_LX=y +CONFIG_MICROCODE=y +CONFIG_MICROCODE_OLD_INTERFACE=y +CONFIG_MII=y +# CONFIG_MINIX_FS is not set +# CONFIG_MINIX_SUBPARTITION is not set +CONFIG_MINI_FO=y +CONFIG_MISC_DEVICES=y +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +CONFIG_MKISS=m +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_RICOH_MMC is not set +CONFIG_MMC_SDHCI=y +# CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_UNSAFE_RESUME is not set +# CONFIG_MMC_WBSD is not set +CONFIG_MMU=y +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +# CONFIG_MOUSE_PS2_OLPC is not set +CONFIG_MOUSE_PS2_SYNAPTICS=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPSC is not set +# CONFIG_MSDOS_FS is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_BLOCK2MTD=y +# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CHAR=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_CAFE=y +# CONFIG_MTD_NAND_CS553X is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_OOPS=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_PCI=y +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_ROM is not set +CONFIG_MTD_ROOTFS_ROOT_DEV=y +CONFIG_MTD_ROOTFS_SPLIT=y +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_TS5500 is not set +# CONFIG_MTD_UBI is not set +# CONFIG_MTRR is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set +# CONFIG_MWAVE is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NATSEMI is not set +# CONFIG_NCP_FS is not set +# CONFIG_NE2K_PCI is not set +CONFIG_NET=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETDEBUG is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_NETDEV_1000=y +# CONFIG_NETDEV_10000 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +CONFIG_NETFILTER_XT_MATCH_DCCP=m +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +CONFIG_NETFILTER_XT_MATCH_LAYER7=m +# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +CONFIG_NETFILTER_XT_MATCH_LIMIT=y +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +CONFIG_NETFILTER_XT_MATCH_POLICY=m +# CONFIG_NETFILTER_XT_MATCH_PORTSCAN is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=y +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_NETFILTER_XT_TARGET_CHAOS is not set +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DELUDE is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=y +CONFIG_NETFILTER_XT_TARGET_TRACE=m +# CONFIG_NETPOLL is not set +# CONFIG_NETROM is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NET_9P is not set +CONFIG_NET_ACT_GACT=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_MIRRED=m +# CONFIG_NET_ACT_NAT is not set +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_POLICE=y +# CONFIG_NET_ACT_SIMP is not set +CONFIG_NET_CLS=y +CONFIG_NET_CLS_ACT=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_CLS_POLICE=y +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_U32=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_ESTIMATOR=y +CONFIG_NET_ETHERNET=y +# CONFIG_NET_FC is not set +# CONFIG_NET_IPGRE is not set +CONFIG_NET_IPGRE_BROADCAST=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_ISA is not set +# CONFIG_NET_KEY is not set +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_NET_PCI=y +# CONFIG_NET_PCMCIA is not set +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_POLL_CONTROLLER is not set +CONFIG_NET_RADIO=y +# CONFIG_NET_SB1000 is not set +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_CBQ=m +# CONFIG_NET_SCH_CLK_CPU is not set +# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set +CONFIG_NET_SCH_CLK_JIFFIES=y +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_ESFQ is not set +CONFIG_NET_SCH_ESFQ_NFCT=y +CONFIG_NET_SCH_FIFO=y +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_INGRESS is not set +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_PRIO=m +# CONFIG_NET_SCH_RED is not set +CONFIG_NET_SCH_RR=m +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_NET_WIRELESS=y +CONFIG_NET_WIRELESS_RTNETLINK=y +# CONFIG_NEW_GPIO is not set +CONFIG_NEW_LEDS=y +# CONFIG_NFSD is not set +CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V2_ACL is not set +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +# CONFIG_NFS_ACL_SUPPORT is not set +CONFIG_NFS_COMMON=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFS_FS is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFTL is not set +CONFIG_NF_CONNTRACK=y +# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CONNTRACK_ENABLED=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CONNTRACK_FTP=m +# CONFIG_NF_CONNTRACK_H323 is not set +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_NF_CONNTRACK_RTSP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +CONFIG_NF_CONNTRACK_SUPPORT=y +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CT_PROTO_GRE=m +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +CONFIG_NF_NAT=y +# CONFIG_NF_NAT_AMANDA is not set +CONFIG_NF_NAT_FTP=m +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_NEEDED=y +# CONFIG_NF_NAT_PPTP is not set +CONFIG_NF_NAT_PROTO_GRE=m +# CONFIG_NF_NAT_RTSP is not set +# CONFIG_NF_NAT_SIP is not set +# CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_TFTP=m +CONFIG_NL80211=y +# CONFIG_NLS is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_CODEPAGE_1250=m +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_ISO8859_9 is not set +CONFIG_NLS_KOI8_R=m +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +CONFIG_NOHIGHMEM=y +CONFIG_NORTEL_HERMES=m +CONFIG_NO_HZ=y +CONFIG_NR_QUICK=1 +# CONFIG_NS83820 is not set +CONFIG_NSC_GPIO=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_FS is not set +# CONFIG_NTFS_RW is not set +CONFIG_NVRAM=y +# CONFIG_OCFS2_FS is not set +CONFIG_OLPC=y +CONFIG_OLPC_PM=y +CONFIG_OPEN_FIRMWARE=y +# CONFIG_OSF_PARTITION is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PARAVIRT_GUEST is not set +# CONFIG_PARPORT is not set +# CONFIG_PARPORT_PC is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CS5535 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_ISAPNP is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +CONFIG_PATA_PLATFORM=m +# CONFIG_PATA_QDI is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_WINBOND_VLB is not set +# CONFIG_PC300TOO is not set +CONFIG_PC8736x_GPIO=m +# CONFIG_PC87413_WDT is not set +# CONFIG_PCCARD is not set +CONFIG_PCI=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_PCI_ATMEL is not set +# CONFIG_PCI_DEBUG is not set +CONFIG_PCI_DIRECT=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_GOANY is not set +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GODIRECT is not set +# CONFIG_PCI_GOMMCONFIG is not set +CONFIG_PCI_GOOLPC=y +CONFIG_PCI_HERMES=m +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_MSI is not set +CONFIG_PCI_OLPC=y +# CONFIG_PCMCIA is not set +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_ATMEL is not set +# CONFIG_PCMCIA_DEBUG is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_HERMES is not set +# CONFIG_PCMCIA_IOCTL is not set +# CONFIG_PCMCIA_LOAD_CIS is not set +# CONFIG_PCMCIA_NETWAVE is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_PCMCIA_SPECTRUM is not set +# CONFIG_PCMCIA_SYM53C500 is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PCNET32 is not set +# CONFIG_PD6729 is not set +# CONFIG_PDA_POWER is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_PHANTOM is not set +# CONFIG_PHONE is not set +# CONFIG_PHYLIB is not set +CONFIG_PHYSICAL_ALIGN=0x100000 +CONFIG_PHYSICAL_START=0x100000 +# CONFIG_PID_NS is not set +CONFIG_PLIST=y +CONFIG_PLX_HERMES=m +CONFIG_PM=y +CONFIG_PM_DEBUG=y +CONFIG_PM_LEGACY=y +CONFIG_PM_SLEEP=y +CONFIG_PM_STD_PARTITION="" +# CONFIG_PM_TRACE is not set +# CONFIG_PM_VERBOSE is not set +# CONFIG_POSIX_MQUEUE is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_PPP=m +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +# CONFIG_PPP_MPPE is not set +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_PRINTK=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_PRISM54 is not set +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +# CONFIG_PROFILING is not set +# CONFIG_PROMFS_FS is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_QEMU is not set +# CONFIG_QLA3XXX is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_QUICKLIST=y +# CONFIG_QUOTA is not set +# CONFIG_R3964 is not set +# CONFIG_R8169 is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set +# CONFIG_RAID_ATTRS is not set +CONFIG_RAMFS=y +# CONFIG_RAW_DRIVER is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_REED_SOLOMON=y +CONFIG_REED_SOLOMON_DEC16=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_RELAY=y +# CONFIG_RELOCATABLE is not set +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_RFD_FTL is not set +# CONFIG_RFKILL is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_ROSE is not set +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_RTC=y +# CONFIG_RTC_CLASS is not set +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTL8187 is not set +CONFIG_RT_MUTEXES=y +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_S2IO is not set +# CONFIG_SAMPLES is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SBC7240_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_SC92031 is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_SCHED_DEBUG=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCSI=y +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DEBUG is not set +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_ESP_CORE is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_SCSI_LPFC is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_PAS16 is not set +CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +# CONFIG_SCSI_SEAGATE is not set +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_ULTRASTOR is not set +CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SCx200 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_SDIO_UART is not set +# CONFIG_SECCOMP is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SEMAPHORE_SLEEPERS=y +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_APPLESMC is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_CORETEMP is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_HDAPS is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_K8TEMP is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_CS=m +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIO=y +# CONFIG_SERIO_CT82C710 is not set +CONFIG_SERIO_I8042=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SGI_IOC4 is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_SHAPER is not set +CONFIG_SHMEM=y +CONFIG_SIGNALFD=y +# CONFIG_SIS190 is not set +# CONFIG_SIS900 is not set +# CONFIG_SK98LIN is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +CONFIG_SLAB=y +CONFIG_SLABINFO=y +CONFIG_SLHC=m +# CONFIG_SLIP is not set +# CONFIG_SLOB is not set +# CONFIG_SLUB is not set +# CONFIG_SMB_FS is not set +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMP is not set +# CONFIG_SMSC37B787_WDT is not set +CONFIG_SND=m +# CONFIG_SND_AC97_POWER_SAVE is not set +# CONFIG_SND_AD1816A is not set +# CONFIG_SND_AD1848 is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ADLIB is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ALS100 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT2320 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMI8330 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4231 is not set +# CONFIG_SND_CS4232 is not set +# CONFIG_SND_CS4236 is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5535AUDIO is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_DT019X is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1688 is not set +# CONFIG_SND_ES18XX is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_ES968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_GUSCLASSIC is not set +# CONFIG_SND_GUSEXTREME is not set +# CONFIG_SND_GUSMAX is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +CONFIG_SND_HWDEP=m +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_INTERWAVE is not set +# CONFIG_SND_INTERWAVE_STB is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_MIRO is not set +# CONFIG_SND_MIXART is not set +CONFIG_SND_MIXER_OSS=m +# CONFIG_SND_MONA is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_OPL3SA2 is not set +# CONFIG_SND_OPTI92X_AD1848 is not set +# CONFIG_SND_OPTI92X_CS4231 is not set +# CONFIG_SND_OPTI93X is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_PCM=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_PDAUDIOCF is not set +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_RTCTIMER is not set +# CONFIG_SND_SB16 is not set +# CONFIG_SND_SB8 is not set +# CONFIG_SND_SBAWE is not set +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_SGALAXY is not set +# CONFIG_SND_SOC is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_SSCAPE is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_TIMER=m +# CONFIG_SND_TRIDENT is not set +CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_WAVEFRONT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SNI_RM is not set +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_SONYPI is not set +# CONFIG_SOUND is not set +# CONFIG_SOUND_PRIME is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_SQUASHFS_VMALLOC is not set +# CONFIG_SSB is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSFDC is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_STANDALONE=y +# CONFIG_STRIP is not set +# CONFIG_SUNDANCE is not set +# CONFIG_SUNGEM is not set +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_SUNRPC_GSS=m +# CONFIG_SUN_PARTITION is not set +CONFIG_SUSPEND=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SWAP=y +# CONFIG_SYNCLINK_CS is not set +CONFIG_SYN_COOKIES=y +CONFIG_SYSCTL=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSFS=y +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_SYSPROF is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_SYSV_FS is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_TASKSTATS is not set +# CONFIG_TCG_TPM is not set +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_VEGAS=y +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_YEAH=m +# CONFIG_TCP_MD5SIG is not set +# CONFIG_TELCLOCK is not set +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TICK_ONESHOT=y +# CONFIG_TIFM_CORE is not set +# CONFIG_TIGON3 is not set +CONFIG_TIMERFD=y +# CONFIG_TIMER_STATS is not set +# CONFIG_TINY_SHMEM is not set +# CONFIG_TIPC is not set +# CONFIG_TLAN is not set +CONFIG_TMD_HERMES=m +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TOSHIBA is not set +# CONFIG_TR is not set +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_TUN is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_TUNER_TEA5761 is not set +# CONFIG_TYPHOON is not set +# CONFIG_UDF_FS is not set +CONFIG_UDF_NLS=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_UFS_FS is not set +CONFIG_UID16=y +# CONFIG_UIO is not set +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_UNIX=y +CONFIG_UNIX98_PTYS=y +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_USB=y +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AIPTEK is not set +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_APPLETOUCH is not set +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +CONFIG_USB_ATM=m +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_BELKIN=y +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_CATC=m +# CONFIG_USB_CXACRU is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_DABUSB is not set +# CONFIG_USB_DEBUG is not set +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DSBR is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_ET61X251 is not set +CONFIG_USB_EZUSB=y +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_GADGET is not set +# CONFIG_USB_HID is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_KBD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_KC2190 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LIBUSUAL is not set +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SERIAL is not set +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_AIRPRIME=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CP2101=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +# CONFIG_USB_SERIAL_DEBUG is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SAFE_PADDED=y +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_SN9C102 is not set +CONFIG_USB_SPEEDTOUCH=m +CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE_ALAUDA=y +CONFIG_USB_STORAGE_DATAFAB=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DPCM=y +CONFIG_USB_STORAGE_FREECOM=y +# CONFIG_USB_STORAGE_ISD200 is not set +CONFIG_USB_STORAGE_JUMPSHOT=y +CONFIG_USB_STORAGE_KARMA=y +# CONFIG_USB_STORAGE_ONETOUCH is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_USBAT=y +# CONFIG_USB_STV680 is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +CONFIG_USB_UEAGLEATM=m +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_USBNET is not set +CONFIG_USB_USBNET_MII=m +# CONFIG_USB_VICAM is not set +# CONFIG_USB_W9968CF is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_XUSBATM is not set +CONFIG_USB_YEALINK=m +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USER_NS is not set +# CONFIG_UTS_NS is not set +# CONFIG_VETH is not set +# CONFIG_VFAT_FS is not set +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +# CONFIG_VGASTATE is not set +CONFIG_VGA_CONSOLE=y +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT848 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_CAFE_CCIC is not set +# CONFIG_VIDEO_CAPTURE_DRIVERS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_CX2341X is not set +# CONFIG_VIDEO_CX25840 is not set +# CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_DPC is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_IVTV is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_MXB is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA7111 is not set +# CONFIG_VIDEO_SAA7114 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7134 is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_SAA7191 is not set +CONFIG_VIDEO_SELECT=y +# CONFIG_VIDEO_STRADIS is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_VIDEO_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_VPX3220 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_ZORAN is not set +CONFIG_VIRTUALIZATION=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_VITESSE_PHY is not set +CONFIG_VLAN_8021Q=y +CONFIG_VM86=y +# CONFIG_VMSPLIT_1G is not set +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_2G_OPT is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_3G_OPT is not set +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_VORTEX is not set +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_VXFS_FS is not set +# CONFIG_W1 is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_WAN is not set +# CONFIG_WAN_ROUTER is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +# CONFIG_WDTPCI is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WLAN_80211=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_X25 is not set +CONFIG_X86=y +CONFIG_X86_32=y +# CONFIG_X86_64 is not set +# CONFIG_X86_BIGSMP is not set +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_BSWAP=y +CONFIG_X86_CMPXCHG=y +# CONFIG_X86_CPUID is not set +# CONFIG_X86_ELAN is not set +# CONFIG_X86_ES7000 is not set +CONFIG_X86_FIND_SMP_CONFIG=y +CONFIG_X86_GENERIC=y +# CONFIG_X86_GENERICARCH is not set +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_INVLPG=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_LOCAL_APIC=y +# CONFIG_X86_MCE is not set +CONFIG_X86_MINIMUM_CPU_FAMILY=4 +CONFIG_X86_MPPARSE=y +# CONFIG_X86_MSR is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_PAE is not set +CONFIG_X86_PC=y +CONFIG_X86_POPAD_OK=y +# CONFIG_X86_REBOOTFIXUPS is not set +# CONFIG_X86_SUMMIT is not set +CONFIG_X86_TSC=y +CONFIG_X86_UP_APIC=y +CONFIG_X86_UP_IOAPIC=y +CONFIG_X86_USE_3DNOW=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +# CONFIG_X86_VISWS is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_VSMP is not set +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_XADD=y +CONFIG_XFRM=y +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_USER=m +# CONFIG_XFS_FS is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_YAM is not set +# CONFIG_YELLOWFIN is not set +CONFIG_YENTA=m +# CONFIG_YENTA_O2 is not set +# CONFIG_YENTA_RICOH is not set +# CONFIG_YENTA_TI is not set +# CONFIG_YENTA_TOSHIBA is not set +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZONE_DMA=y +# CONFIG_ZONE_DMA32 is not set +CONFIG_ZONE_DMA_FLAG=1 diff --git a/target/linux/olpc/files-2.6.23/arch/i386/boot/setup.S b/target/linux/olpc/files-2.6.23/arch/i386/boot/setup.S new file mode 100644 index 0000000000..4cf6e231c5 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/arch/i386/boot/setup.S @@ -0,0 +1,1080 @@ +/* + * setup.S Copyright (C) 1991, 1992 Linus Torvalds + * + * setup.s is responsible for getting the system data from the BIOS, + * and putting them into the appropriate places in system memory. + * both setup.s and system has been loaded by the bootblock. + * + * This code asks the bios for memory/disk/other parameters, and + * puts them in a "safe" place: 0x90000-0x901FF, ie where the + * boot-block used to be. It is then up to the protected mode + * system to read them from there before the area is overwritten + * for buffer-blocks. + * + * Move PS/2 aux init code to psaux.c + * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92 + * + * some changes and additional features by Christoph Niemann, + * March 1993/June 1994 (Christoph.Niemann@linux.org) + * + * add APM BIOS checking by Stephen Rothwell, May 1994 + * (sfr@canb.auug.org.au) + * + * High load stuff, initrd support and position independency + * by Hans Lermen & Werner Almesberger, February 1996 + * , + * + * Video handling moved to video.S by Martin Mares, March 1996 + * + * + * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david + * parsons) to avoid loadlin confusion, July 1997 + * + * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999. + * + * + * Fix to work around buggy BIOSes which don't use carry bit correctly + * and/or report extended memory in CX/DX for e801h memory size detection + * call. As a result the kernel got wrong figures. The int15/e801h docs + * from Ralf Brown interrupt list seem to indicate AX/BX should be used + * anyway. So to avoid breaking many machines (presumably there was a reason + * to orginally use CX/DX instead of AX/BX), we do a kludge to see + * if CX/DX have been changed in the e801 call and if so use AX/BX . + * Michael Miller, April 2001 + * + * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes + * by Robert Schwebel, December 2001 + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Signature words to ensure LILO loaded us right */ +#define SIG1 0xAA55 +#define SIG2 0x5A5A + +INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way +SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536). +SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment + # ... and the former contents of CS + +DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020 + +.code16 +.globl begtext, begdata, begbss, endtext, enddata, endbss + +.text +begtext: +.data +begdata: +.bss +begbss: +.text + +start: + jmp trampoline + +# This is the setup header, and it must start at %cs:2 (old 0x9020:2) + + .ascii "HdrS" # header signature + .word 0x0206 # header version number (>= 0x0105) + # or else old loadlin-1.5 will fail) +realmode_swtch: .word 0, 0 # default_switch, SETUPSEG +start_sys_seg: .word SYSSEG + .word kernel_version # pointing to kernel version string + # above section of header is compatible + # with loadlin-1.5 (header v1.5). Don't + # change it. + +type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin, + # Bootlin, SYSLX, bootsect...) + # See Documentation/i386/boot.txt for + # assigned ids + +# flags, unused bits must be zero (RFU) bit within loadflags +loadflags: +LOADED_HIGH = 1 # If set, the kernel is loaded high +CAN_USE_HEAP = 0x80 # If set, the loader also has set + # heap_end_ptr to tell how much + # space behind setup.S can be used for + # heap purposes. + # Only the loader knows what is free +#ifndef __BIG_KERNEL__ + .byte 0 +#else + .byte LOADED_HIGH +#endif + +setup_move_size: .word 0x8000 # size to move, when setup is not + # loaded at 0x90000. We will move setup + # to 0x90000 then just before jumping + # into the kernel. However, only the + # loader knows how much data behind + # us also needs to be loaded. + +code32_start: # here loaders can put a different + # start address for 32-bit code. +#ifndef __BIG_KERNEL__ + .long 0x1000 # 0x1000 = default for zImage +#else + .long 0x100000 # 0x100000 = default for big kernel +#endif + +ramdisk_image: .long 0 # address of loaded ramdisk image + # Here the loader puts the 32-bit + # address where it loaded the image. + # This only will be read by the kernel. + +ramdisk_size: .long 0 # its size in bytes + +bootsect_kludge: + .long 0 # obsolete + +heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later) + # space from here (exclusive) down to + # end of setup code can be used by setup + # for local heap purposes. + +pad1: .word 0 +cmd_line_ptr: .long 0 # (Header version 0x0202 or later) + # If nonzero, a 32-bit pointer + # to the kernel command line. + # The command line should be + # located between the start of + # setup and the end of low + # memory (0xa0000), or it may + # get overwritten before it + # gets read. If this field is + # used, there is no longer + # anything magical about the + # 0x90000 segment; the setup + # can be located anywhere in + # low memory 0x10000 or higher. + +ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff + # (Header version 0x0203 or later) + # The highest safe address for + # the contents of an initrd + +kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment + #required for protected mode + #kernel +#ifdef CONFIG_RELOCATABLE +relocatable_kernel: .byte 1 +#else +relocatable_kernel: .byte 0 +#endif +pad2: .byte 0 +pad3: .word 0 + +cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, + #added with boot protocol + #version 2.06 + +trampoline: call start_of_setup + .align 16 + # The offset at this point is 0x240 + .space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff) +# End of setup header ##################################################### + +start_of_setup: +# Bootlin depends on this being done early + movw $0x01500, %ax + movb $0x81, %dl + int $0x13 + +#ifdef SAFE_RESET_DISK_CONTROLLER +# Reset the disk controller. + movw $0x0000, %ax + movb $0x80, %dl + int $0x13 +#endif + +# Set %ds = %cs, we know that SETUPSEG = %cs at this point + movw %cs, %ax # aka SETUPSEG + movw %ax, %ds +# Check signature at end of setup + cmpw $SIG1, setup_sig1 + jne bad_sig + + cmpw $SIG2, setup_sig2 + jne bad_sig + + jmp good_sig1 + +# Routine to print asciiz string at ds:si +prtstr: + lodsb + andb %al, %al + jz fin + + call prtchr + jmp prtstr + +fin: ret + +# Space printing +prtsp2: call prtspc # Print double space +prtspc: movb $0x20, %al # Print single space (note: fall-thru) + +# Part of above routine, this one just prints ascii al +prtchr: pushw %ax + pushw %cx + movw $7,%bx + movw $0x01, %cx + movb $0x0e, %ah + int $0x10 + popw %cx + popw %ax + ret + +beep: movb $0x07, %al + jmp prtchr + +no_sig_mess: .string "No setup signature found ..." + +good_sig1: + jmp good_sig + +# We now have to find the rest of the setup code/data +bad_sig: + movw %cs, %ax # SETUPSEG + subw $DELTA_INITSEG, %ax # INITSEG + movw %ax, %ds + xorb %bh, %bh + movb (497), %bl # get setup sect from bootsect + subw $4, %bx # LILO loads 4 sectors of setup + shlw $8, %bx # convert to words (1sect=2^8 words) + movw %bx, %cx + shrw $3, %bx # convert to segment + addw $SYSSEG, %bx + movw %bx, %cs:start_sys_seg +# Move rest of setup code/data to here + movw $2048, %di # four sectors loaded by LILO + subw %si, %si + pushw %cs + popw %es + movw $SYSSEG, %ax + movw %ax, %ds + rep + movsw + movw %cs, %ax # aka SETUPSEG + movw %ax, %ds + cmpw $SIG1, setup_sig1 + jne no_sig + + cmpw $SIG2, setup_sig2 + jne no_sig + + jmp good_sig + +no_sig: + lea no_sig_mess, %si + call prtstr + +no_sig_loop: + hlt + jmp no_sig_loop + +good_sig: + movw %cs, %ax # aka SETUPSEG + subw $DELTA_INITSEG, %ax # aka INITSEG + movw %ax, %ds +# Check if an old loader tries to load a big-kernel + testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel? + jz loader_ok # No, no danger for old loaders. + + cmpb $0, %cs:type_of_loader # Do we have a loader that + # can deal with us? + jnz loader_ok # Yes, continue. + + pushw %cs # No, we have an old loader, + popw %ds # die. + lea loader_panic_mess, %si + call prtstr + + jmp no_sig_loop + +loader_panic_mess: .string "Wrong loader, giving up..." + +# check minimum cpuid +# we do this here because it is the last place we can actually +# show a user visible error message. Later the video modus +# might be already messed up. +loader_ok: + call verify_cpu + testl %eax,%eax + jz cpu_ok + movw %cs,%ax # aka SETUPSEG + movw %ax,%ds + lea cpu_panic_mess,%si + call prtstr +1: jmp 1b + +cpu_panic_mess: + .asciz "PANIC: CPU too old for this kernel." + +#include "../kernel/verify_cpu.S" + +cpu_ok: +# Get memory size (extended mem, kB) + + xorl %eax, %eax + movl %eax, (0x1e0) +#ifndef STANDARD_MEMORY_BIOS_CALL + movb %al, (E820NR) +# Try three different memory detection schemes. First, try +# e820h, which lets us assemble a memory map, then try e801h, +# which returns a 32-bit memory size, and finally 88h, which +# returns 0-64m + +# method E820H: +# the memory map from hell. e820h returns memory classified into +# a whole bunch of different types, and allows memory holes and +# everything. We scan through this memory map and build a list +# of the first 32 memory areas, which we return at [E820MAP]. +# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification. + +#define SMAP 0x534d4150 + +meme820: + xorl %ebx, %ebx # continuation counter + movw $E820MAP, %di # point into the whitelist + # so we can have the bios + # directly write into it. + +jmpe820: + movl $0x0000e820, %eax # e820, upper word zeroed + movl $SMAP, %edx # ascii 'SMAP' + movl $20, %ecx # size of the e820rec + pushw %ds # data record. + popw %es + int $0x15 # make the call + jc bail820 # fall to e801 if it fails + + cmpl $SMAP, %eax # check the return is `SMAP' + jne bail820 # fall to e801 if it fails + +# cmpl $1, 16(%di) # is this usable memory? +# jne again820 + + # If this is usable memory, we save it by simply advancing %di by + # sizeof(e820rec). + # +good820: + movb (E820NR), %al # up to 128 entries + cmpb $E820MAX, %al + jae bail820 + + incb (E820NR) + movw %di, %ax + addw $20, %ax + movw %ax, %di +again820: + cmpl $0, %ebx # check to see if + jne jmpe820 # %ebx is set to EOF +bail820: + + +# method E801H: +# memory size is in 1k chunksizes, to avoid confusing loadlin. +# we store the 0xe801 memory size in a completely different place, +# because it will most likely be longer than 16 bits. +# (use 1e0 because that's what Larry Augustine uses in his +# alternative new memory detection scheme, and it's sensible +# to write everything into the same place.) + +meme801: + stc # fix to work around buggy + xorw %cx,%cx # BIOSes which don't clear/set + xorw %dx,%dx # carry on pass/error of + # e801h memory size call + # or merely pass cx,dx though + # without changing them. + movw $0xe801, %ax + int $0x15 + jc mem88 + + cmpw $0x0, %cx # Kludge to handle BIOSes + jne e801usecxdx # which report their extended + cmpw $0x0, %dx # memory in AX/BX rather than + jne e801usecxdx # CX/DX. The spec I have read + movw %ax, %cx # seems to indicate AX/BX + movw %bx, %dx # are more reasonable anyway... + +e801usecxdx: + andl $0xffff, %edx # clear sign extend + shll $6, %edx # and go from 64k to 1k chunks + movl %edx, (0x1e0) # store extended memory size + andl $0xffff, %ecx # clear sign extend + addl %ecx, (0x1e0) # and add lower memory into + # total size. + +# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or +# 64mb, depending on the bios) in ax. +mem88: + +#endif + movb $0x88, %ah + int $0x15 + movw %ax, (2) + +# Set the keyboard repeat rate to the max + movw $0x0305, %ax + xorw %bx, %bx + int $0x16 + +#ifndef CONFIG_VGA_NOPROBE + +# Check for video adapter and its parameters and allow the +# user to browse video modes. + call video # NOTE: we need %ds pointing + # to bootsector +#endif + +# Get hd0 data... + xorw %ax, %ax + movw %ax, %ds + ldsw (4 * 0x41), %si + movw %cs, %ax # aka SETUPSEG + subw $DELTA_INITSEG, %ax # aka INITSEG + pushw %ax + movw %ax, %es + movw $0x0080, %di + movw $0x10, %cx + pushw %cx + cld + rep + movsb +# Get hd1 data... + xorw %ax, %ax + movw %ax, %ds + ldsw (4 * 0x46), %si + popw %cx + popw %es + movw $0x0090, %di + rep + movsb +# Check that there IS a hd1 :-) + movw $0x01500, %ax + movb $0x81, %dl + int $0x13 + jc no_disk1 + + cmpb $3, %ah + je is_disk1 + +no_disk1: + movw %cs, %ax # aka SETUPSEG + subw $DELTA_INITSEG, %ax # aka INITSEG + movw %ax, %es + movw $0x0090, %di + movw $0x10, %cx + xorw %ax, %ax + cld + rep + stosb +is_disk1: +# check for Micro Channel (MCA) bus + movw %cs, %ax # aka SETUPSEG + subw $DELTA_INITSEG, %ax # aka INITSEG + movw %ax, %ds + xorw %ax, %ax + movw %ax, (0xa0) # set table length to 0 + movb $0xc0, %ah + stc + int $0x15 # moves feature table to es:bx + jc no_mca + + pushw %ds + movw %es, %ax + movw %ax, %ds + movw %cs, %ax # aka SETUPSEG + subw $DELTA_INITSEG, %ax # aka INITSEG + movw %ax, %es + movw %bx, %si + movw $0xa0, %di + movw (%si), %cx + addw $2, %cx # table length is a short + cmpw $0x10, %cx + jc sysdesc_ok + + movw $0x10, %cx # we keep only first 16 bytes +sysdesc_ok: + rep + movsb + popw %ds +no_mca: +#ifdef CONFIG_X86_VOYAGER + movb $0xff, 0x40 # flag on config found + movb $0xc0, %al + mov $0xff, %ah + int $0x15 # put voyager config info at es:di + jc no_voyager + movw $0x40, %si # place voyager info in apm table + cld + movw $7, %cx +voyager_rep: + movb %es:(%di), %al + movb %al,(%si) + incw %di + incw %si + decw %cx + jnz voyager_rep +no_voyager: +#endif +# Check for PS/2 pointing device + movw %cs, %ax # aka SETUPSEG + subw $DELTA_INITSEG, %ax # aka INITSEG + movw %ax, %ds + movb $0, (0x1ff) # default is no pointing device + int $0x11 # int 0x11: equipment list + testb $0x04, %al # check if mouse installed + jz no_psmouse + + movb $0xAA, (0x1ff) # device present +no_psmouse: + +#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) + movl $0x0000E980, %eax # IST Support + movl $0x47534943, %edx # Request value + int $0x15 + + movl %eax, (96) + movl %ebx, (100) + movl %ecx, (104) + movl %edx, (108) +#endif + +#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE) +# Then check for an APM BIOS... + # %ds points to the bootsector + movw $0, 0x40 # version = 0 means no APM BIOS + movw $0x05300, %ax # APM BIOS installation check + xorw %bx, %bx + int $0x15 + jc done_apm_bios # Nope, no APM BIOS + + cmpw $0x0504d, %bx # Check for "PM" signature + jne done_apm_bios # No signature, no APM BIOS + + andw $0x02, %cx # Is 32 bit supported? + je done_apm_bios # No 32-bit, no (good) APM BIOS + + movw $0x05304, %ax # Disconnect first just in case + xorw %bx, %bx + int $0x15 # ignore return code + movw $0x05303, %ax # 32 bit connect + xorl %ebx, %ebx + xorw %cx, %cx # paranoia :-) + xorw %dx, %dx # ... + xorl %esi, %esi # ... + xorw %di, %di # ... + int $0x15 + jc no_32_apm_bios # Ack, error. + + movw %ax, (66) # BIOS code segment + movl %ebx, (68) # BIOS entry point offset + movw %cx, (72) # BIOS 16 bit code segment + movw %dx, (74) # BIOS data segment + movl %esi, (78) # BIOS code segment lengths + movw %di, (82) # BIOS data segment length +# Redo the installation check as the 32 bit connect +# modifies the flags returned on some BIOSs + movw $0x05300, %ax # APM BIOS installation check + xorw %bx, %bx + xorw %cx, %cx # paranoia + int $0x15 + jc apm_disconnect # error -> shouldn't happen + + cmpw $0x0504d, %bx # check for "PM" signature + jne apm_disconnect # no sig -> shouldn't happen + + movw %ax, (64) # record the APM BIOS version + movw %cx, (76) # and flags + jmp done_apm_bios + +apm_disconnect: # Tidy up + movw $0x05304, %ax # Disconnect + xorw %bx, %bx + int $0x15 # ignore return code + + jmp done_apm_bios + +no_32_apm_bios: + andw $0xfffd, (76) # remove 32 bit support bit +done_apm_bios: +#endif + +#include "edd.S" + +# Now we want to move to protected mode ... + cmpw $0, %cs:realmode_swtch + jz rmodeswtch_normal + + lcall *%cs:realmode_swtch + + jmp rmodeswtch_end + +rmodeswtch_normal: + pushw %cs + call default_switch + +rmodeswtch_end: +# Now we move the system to its rightful place ... but we check if we have a +# big-kernel. In that case we *must* not move it ... + testb $LOADED_HIGH, %cs:loadflags + jz do_move0 # .. then we have a normal low + # loaded zImage + # .. or else we have a high + # loaded bzImage + jmp end_move # ... and we skip moving + +do_move0: + movw $0x100, %ax # start of destination segment + movw %cs, %bp # aka SETUPSEG + subw $DELTA_INITSEG, %bp # aka INITSEG + movw %cs:start_sys_seg, %bx # start of source segment + cld +do_move: + movw %ax, %es # destination segment + incb %ah # instead of add ax,#0x100 + movw %bx, %ds # source segment + addw $0x100, %bx + subw %di, %di + subw %si, %si + movw $0x800, %cx + rep + movsw + cmpw %bp, %bx # assume start_sys_seg > 0x200, + # so we will perhaps read one + # page more than needed, but + # never overwrite INITSEG + # because destination is a + # minimum one page below source + jb do_move + +end_move: +# then we load the segment descriptors + movw %cs, %ax # aka SETUPSEG + movw %ax, %ds + +# Check whether we need to be downward compatible with version <=201 + cmpl $0, cmd_line_ptr + jne end_move_self # loader uses version >=202 features + cmpb $0x20, type_of_loader + je end_move_self # bootsect loader, we know of it + +# Boot loader doesnt support boot protocol version 2.02. +# If we have our code not at 0x90000, we need to move it there now. +# We also then need to move the params behind it (commandline) +# Because we would overwrite the code on the current IP, we move +# it in two steps, jumping high after the first one. + movw %cs, %ax + cmpw $SETUPSEG, %ax + je end_move_self + + cli # make sure we really have + # interrupts disabled ! + # because after this the stack + # should not be used + subw $DELTA_INITSEG, %ax # aka INITSEG + movw %ss, %dx + cmpw %ax, %dx + jb move_self_1 + + addw $INITSEG, %dx + subw %ax, %dx # this will go into %ss after + # the move +move_self_1: + movw %ax, %ds + movw $INITSEG, %ax # real INITSEG + movw %ax, %es + movw %cs:setup_move_size, %cx + std # we have to move up, so we use + # direction down because the + # areas may overlap + movw %cx, %di + decw %di + movw %di, %si + subw $move_self_here+0x200, %cx + rep + movsb + ljmp $SETUPSEG, $move_self_here + +move_self_here: + movw $move_self_here+0x200, %cx + rep + movsb + movw $SETUPSEG, %ax + movw %ax, %ds + movw %dx, %ss +end_move_self: # now we are at the right place + +# +# Enable A20. This is at the very best an annoying procedure. +# A20 code ported from SYSLINUX 1.52-1.63 by H. Peter Anvin. +# AMD Elan bug fix by Robert Schwebel. +# + +#if defined(CONFIG_X86_ELAN) + movb $0x02, %al # alternate A20 gate + outb %al, $0x92 # this works on SC410/SC520 +a20_elan_wait: + call a20_test + jz a20_elan_wait + jmp a20_done +#endif + + +A20_TEST_LOOPS = 32 # Iterations per wait +A20_ENABLE_LOOPS = 255 # Total loops to try + + +#ifndef CONFIG_X86_VOYAGER +a20_try_loop: + + # First, see if we are on a system with no A20 gate. +a20_none: + call a20_test + jnz a20_done + + # Next, try the BIOS (INT 0x15, AX=0x2401) +a20_bios: + movw $0x2401, %ax + pushfl # Be paranoid about flags + int $0x15 + popfl + + call a20_test + jnz a20_done + + # Try enabling A20 through the keyboard controller +#endif /* CONFIG_X86_VOYAGER */ +a20_kbc: + call empty_8042 + +#ifndef CONFIG_X86_VOYAGER + call a20_test # Just in case the BIOS worked + jnz a20_done # but had a delayed reaction. +#endif + + movb $0xD1, %al # command write + outb %al, $0x64 + call empty_8042 + + movb $0xDF, %al # A20 on + outb %al, $0x60 + call empty_8042 + +#ifndef CONFIG_X86_VOYAGER + # Wait until a20 really *is* enabled; it can take a fair amount of + # time on certain systems; Toshiba Tecras are known to have this + # problem. +a20_kbc_wait: + xorw %cx, %cx +a20_kbc_wait_loop: + call a20_test + jnz a20_done + loop a20_kbc_wait_loop + + # Final attempt: use "configuration port A" +a20_fast: + inb $0x92, %al # Configuration Port A + orb $0x02, %al # "fast A20" version + andb $0xFE, %al # don't accidentally reset + outb %al, $0x92 + + # Wait for configuration port A to take effect +a20_fast_wait: + xorw %cx, %cx +a20_fast_wait_loop: + call a20_test + jnz a20_done + loop a20_fast_wait_loop + + # A20 is still not responding. Try frobbing it again. + # + decb (a20_tries) + jnz a20_try_loop + + movw $a20_err_msg, %si + call prtstr + +a20_die: + hlt + jmp a20_die + +a20_tries: + .byte A20_ENABLE_LOOPS + +a20_err_msg: + .ascii "linux: fatal error: A20 gate not responding!" + .byte 13, 10, 0 + + # If we get here, all is good +a20_done: + +#endif /* CONFIG_X86_VOYAGER */ +# set up gdt and idt and 32bit start address + lidt idt_48 # load idt with 0,0 + xorl %eax, %eax # Compute gdt_base + movw %ds, %ax # (Convert %ds:gdt to a linear ptr) + shll $4, %eax + addl %eax, code32 + addl $gdt, %eax + movl %eax, (gdt_48+2) + lgdt gdt_48 # load gdt with whatever is + # appropriate + +# make sure any possible coprocessor is properly reset.. + xorw %ax, %ax + outb %al, $0xf0 + call delay + + outb %al, $0xf1 + call delay + +# well, that went ok, I hope. Now we mask all interrupts - the rest +# is done in init_IRQ(). + movb $0xFF, %al # mask all interrupts for now + outb %al, $0xA1 + call delay + + movb $0xFB, %al # mask all irq's but irq2 which + outb %al, $0x21 # is cascaded + +# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't +# need no steenking BIOS anyway (except for the initial loading :-). +# The BIOS-routine wants lots of unnecessary data, and it's less +# "interesting" anyway. This is how REAL programmers do it. +# +# Well, now's the time to actually move into protected mode. To make +# things as simple as possible, we do no register set-up or anything, +# we let the gnu-compiled 32-bit programs do that. We just jump to +# absolute address 0x1000 (or the loader supplied one), +# in 32-bit protected mode. +# +# Note that the short jump isn't strictly needed, although there are +# reasons why it might be a good idea. It won't hurt in any case. + movw $1, %ax # protected mode (PE) bit + lmsw %ax # This is it! + jmp flush_instr + +flush_instr: + xorw %bx, %bx # Flag to indicate a boot + xorl %esi, %esi # Pointer to real-mode code + movw %cs, %si + subw $DELTA_INITSEG, %si + shll $4, %esi # Convert to 32-bit pointer + +# jump to startup_32 in arch/i386/boot/compressed/head.S +# +# NOTE: For high loaded big kernels we need a +# jmpi 0x100000,__BOOT_CS +# +# but we yet haven't reloaded the CS register, so the default size +# of the target offset still is 16 bit. +# However, using an operand prefix (0x66), the CPU will properly +# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference +# Manual, Mixing 16-bit and 32-bit code, page 16-6) + + .byte 0x66, 0xea # prefix + jmpi-opcode +code32: .long startup_32 # will be set to %cs+startup_32 + .word __BOOT_CS +.code32 +startup_32: + movl $(__BOOT_DS), %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %fs + movl %eax, %gs + movl %eax, %ss + + xorl %eax, %eax +1: incl %eax # check that A20 really IS enabled + movl %eax, 0x00000000 # loop forever if it isn't + cmpl %eax, 0x00100000 + je 1b + + # Jump to the 32bit entry point + jmpl *(code32_start - start + (DELTA_INITSEG << 4))(%esi) +.code16 + +# Here's a bunch of information about your current kernel.. +kernel_version: .ascii UTS_RELEASE + .ascii " (" + .ascii LINUX_COMPILE_BY + .ascii "@" + .ascii LINUX_COMPILE_HOST + .ascii ") " + .ascii UTS_VERSION + .byte 0 + +# This is the default real mode switch routine. +# to be called just before protected mode transition +default_switch: + cli # no interrupts allowed ! + movb $0x80, %al # disable NMI for bootup + # sequence + outb %al, $0x70 + lret + + +#ifndef CONFIG_X86_VOYAGER +# This routine tests whether or not A20 is enabled. If so, it +# exits with zf = 0. +# +# The memory address used, 0x200, is the int $0x80 vector, which +# should be safe. + +A20_TEST_ADDR = 4*0x80 + +a20_test: + pushw %cx + pushw %ax + xorw %cx, %cx + movw %cx, %fs # Low memory + decw %cx + movw %cx, %gs # High memory area + movw $A20_TEST_LOOPS, %cx + movw %fs:(A20_TEST_ADDR), %ax + pushw %ax +a20_test_wait: + incw %ax + movw %ax, %fs:(A20_TEST_ADDR) + call delay # Serialize and make delay constant + cmpw %gs:(A20_TEST_ADDR+0x10), %ax + loope a20_test_wait + + popw %fs:(A20_TEST_ADDR) + popw %ax + popw %cx + ret + +#endif /* CONFIG_X86_VOYAGER */ + +# This routine checks that the keyboard command queue is empty +# (after emptying the output buffers) +# +# Some machines have delusions that the keyboard buffer is always full +# with no keyboard attached... +# +# If there is no keyboard controller, we will usually get 0xff +# to all the reads. With each IO taking a microsecond and +# a timeout of 100,000 iterations, this can take about half a +# second ("delay" == outb to port 0x80). That should be ok, +# and should also be plenty of time for a real keyboard controller +# to empty. +# + +empty_8042: + pushl %ecx + movl $100000, %ecx + +empty_8042_loop: + decl %ecx + jz empty_8042_end_loop + + call delay + + inb $0x64, %al # 8042 status port + testb $1, %al # output buffer? + jz no_output + + call delay + inb $0x60, %al # read it + jmp empty_8042_loop + +no_output: + testb $2, %al # is input buffer full? + jnz empty_8042_loop # yes - loop +empty_8042_end_loop: + popl %ecx + ret + +# Read the cmos clock. Return the seconds in al +gettime: + pushw %cx + movb $0x02, %ah + int $0x1a + movb %dh, %al # %dh contains the seconds + andb $0x0f, %al + movb %dh, %ah + movb $0x04, %cl + shrb %cl, %ah + aad + popw %cx + ret + +# Delay is needed after doing I/O +delay: + outb %al,$0x80 + ret + +# Descriptor tables +# +# NOTE: The intel manual says gdt should be sixteen bytes aligned for +# efficiency reasons. However, there are machines which are known not +# to boot with misaligned GDTs, so alter this at your peril! If you alter +# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two +# empty GDT entries (one for NULL and one reserved). +# +# NOTE: On some CPUs, the GDT must be 8 byte aligned. This is +# true for the Voyager Quad CPU card which will not boot without +# This directive. 16 byte aligment is recommended by intel. +# + .align 16 +gdt: + .fill GDT_ENTRY_BOOT_CS,8,0 + + .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) + .word 0 # base address = 0 + .word 0x9A00 # code read/exec + .word 0x00CF # granularity = 4096, 386 + # (+5th nibble of limit) + + .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) + .word 0 # base address = 0 + .word 0x9200 # data read/write + .word 0x00CF # granularity = 4096, 386 + # (+5th nibble of limit) +gdt_end: + .align 4 + + .word 0 # alignment byte +idt_48: + .word 0 # idt limit = 0 + .word 0, 0 # idt base = 0L + + .word 0 # alignment byte +gdt_48: + .word gdt_end - gdt - 1 # gdt limit + .word 0, 0 # gdt base (filled in later) + +#ifndef CONFIG_VGA_NOPROBE +# Include video setup & detection code + +#include "video.S" +#endif + +# Setup signature -- must be last +setup_sig1: .word SIG1 +setup_sig2: .word SIG2 + +# After this point, there is some free space which is used by the video mode +# handling code to store the temporary mode table (not used by the kernel). + +modelist: + +.text +endtext: +.data +enddata: +.bss +endbss: diff --git a/target/linux/olpc/files-2.6.23/arch/i386/configs/olpc_defconfig b/target/linux/olpc/files-2.6.23/arch/i386/configs/olpc_defconfig new file mode 100644 index 0000000000..f1675e8631 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/arch/i386/configs/olpc_defconfig @@ -0,0 +1,2183 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc5 +# Wed Jun 20 08:26:53 2007 +# +CONFIG_X86_32=y +CONFIG_GENERIC_TIME=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_X86=y +CONFIG_MMU=y +CONFIG_ZONE_DMA=y +CONFIG_QUICKLIST=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_DMI=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# Processor type and features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_SMP is not set +CONFIG_X86_PC=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_SUMMIT is not set +# CONFIG_X86_BIGSMP is not set +# CONFIG_X86_VISWS is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_ES7000 is not set +# CONFIG_PARAVIRT is not set +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MCORE2 is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +CONFIG_MGEODE_LX=y +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_CMPXCHG=y +CONFIG_X86_L1_CACHE_SHIFT=5 +CONFIG_X86_XADD=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_INVLPG=y +CONFIG_X86_BSWAP=y +CONFIG_X86_POPAD_OK=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_USE_3DNOW=y +CONFIG_X86_TSC=y +CONFIG_X86_MINIMUM_CPU_MODEL=4 +# CONFIG_HPET_TIMER is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y +# CONFIG_X86_UP_APIC is not set +# CONFIG_X86_MCE is not set +# CONFIG_VM86 is not set +# CONFIG_TOSHIBA is not set +# CONFIG_I8K is not set +CONFIG_X86_REBOOTFIXUPS=y +# CONFIG_MICROCODE is not set +CONFIG_X86_MSR=y +CONFIG_X86_CPUID=m + +# +# Firmware Drivers +# +# CONFIG_EDD is not set +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +CONFIG_NOHIGHMEM=y +# CONFIG_HIGHMEM4G is not set +# CONFIG_HIGHMEM64G is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_3G_OPT is not set +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_2G_OPT is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_NR_QUICK=1 +# CONFIG_MATH_EMULATION is not set +# CONFIG_MTRR is not set +# CONFIG_SECCOMP is not set +# CONFIG_VGA_NOPROBE is not set +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_KEXEC=y +CONFIG_PHYSICAL_START=0x400000 +# CONFIG_RELOCATABLE is not set +CONFIG_PHYSICAL_ALIGN=0x100000 +# CONFIG_COMPAT_VDSO is not set + +# +# Power management options (ACPI, APM) +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +CONFIG_PM_DEBUG=y +CONFIG_DISABLE_SUSPEND_VT_SWITCH=y +# CONFIG_PM_TRACE is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_SOFTWARE_SUSPEND=y +CONFIG_PM_STD_PARTITION="" + +# +# ACPI (Advanced Configuration and Power Interface) Support +# +# CONFIG_ACPI is not set +# CONFIG_APM is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +CONFIG_PCI=y +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GOMMCONFIG is not set +# CONFIG_PCI_GODIRECT is not set +# CONFIG_PCI_GOANY is not set +CONFIG_PCI_GOOLPC=y +CONFIG_PCI_DIRECT=y +CONFIG_PCI_OLPC=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_DEBUG is not set +CONFIG_ISA_DMA_API=y +# CONFIG_ISA is not set +# CONFIG_MCA is not set +# CONFIG_SCx200 is not set +CONFIG_GEODE_MFGPT_TIMER=y +CONFIG_OLPC=y +CONFIG_OLPC_PM=y +CONFIG_OPEN_FIRMWARE=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=m +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_DEFAULT_BIC=y +# CONFIG_DEFAULT_CUBIC is not set +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="bic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=y +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +# CONFIG_NETLABEL is not set +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK=m +# CONFIG_NF_CT_ACCT is not set +# CONFIG_NF_CONNTRACK_MARK is not set +# CONFIG_NF_CONNTRACK_SECMARK is not set +# CONFIG_NF_CONNTRACK_EVENTS is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CONNTRACK_FTP=m +# CONFIG_NF_CONNTRACK_H323 is not set +CONFIG_NF_CONNTRACK_IRC=m +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_CONNTRACK_TFTP is not set +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +# CONFIG_IP_NF_MATCH_IPRANGE is not set +# CONFIG_IP_NF_MATCH_TOS is not set +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_TTL is not set +# CONFIG_IP_NF_MATCH_OWNER is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=m +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set +# CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +# CONFIG_NF_NAT_SIP is not set +# CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_NF_CONNTRACK_IPV6 is not set +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_FIFO=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_INGRESS=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +# CONFIG_NET_ACT_IPT is not set +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_ESTIMATOR=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +CONFIG_IEEE80211_SOFTMAC_DEBUG=y +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=m +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_BLOCK_RO=m +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_TS5500 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_CAFE=y +# CONFIG_MTD_NAND_CS553X is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_UB=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_IBM_ASM is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=m + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_HD_IDE is not set +CONFIG_BLK_DEV_IDEDISK=m +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +CONFIG_IDE_TASK_IOCTL=y +# CONFIG_IDE_PROC_FS is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=m +# CONFIG_BLK_DEV_CMD640 is not set +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_RZ1000 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_ONLYDISK=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_CS5535 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +CONFIG_BLK_DEV_PIIX=m +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_IFB=m +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=m +# CONFIG_PCNET32_NAPI is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +CONFIG_NE2K_PCI=m +CONFIG_8139CP=m +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_DEBUG=y +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_PRISM54_USB is not set +# CONFIG_HOSTAP is not set +# CONFIG_BCM43XX is not set +# CONFIG_ZD1211RW is not set +# CONFIG_ADM8211 is not set +# CONFIG_ACX_PCI is not set +# CONFIG_ACX_USB is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET_MII=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +CONFIG_SLIP_SMART=y +# CONFIG_SLIP_MODE_SLIP6 is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=m +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_LIFEBOOK is not set +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_OLPC=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_PCSPKR=m +# CONFIG_INPUT_WISTRON_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_RAW=m +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_INTEL is not set +# CONFIG_HW_RANDOM_AMD is not set +CONFIG_HW_RANDOM_GEODE=y +# CONFIG_HW_RANDOM_VIA is not set +CONFIG_NVRAM=y +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_SONYPI is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_MWAVE is not set +# CONFIG_PC8736x_GPIO is not set +# CONFIG_NSC_GPIO is not set +CONFIG_CS5535_GPIO=m +# CONFIG_RAW_DRIVER is not set +CONFIG_HANGCHECK_TIMER=m + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +CONFIG_SCx200_ACB=y +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +CONFIG_BATTERY_OLPC=y +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=y +# CONFIG_VIDEO_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set + +# +# Video decoders +# +CONFIG_VIDEO_OV7670=y +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_TVP5150 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_SAA7134 is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_CX88 is not set +CONFIG_VIDEO_CAFE_CCIC=y +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_USB_DSBR is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_PROGEAR is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +CONFIG_VGASTATE=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +CONFIG_FB_VGA16=m +CONFIG_FB_VESA=y +# CONFIG_FB_HECUBA is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I810 is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +CONFIG_FB_GEODE=y +CONFIG_FB_GEODE_LX=y +CONFIG_FB_GEODE_GX=y +# CONFIG_FB_GEODE_GX1 is not set +CONFIG_FB_OLPC_DCON=y +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +CONFIG_VIDEO_SELECT=y +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +CONFIG_FONT_SUN12x22=y +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DUMMY=m +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +# CONFIG_SND_SERIAL_U16550 is not set +CONFIG_SND_MPU401=m + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +CONFIG_SND_CS5535AUDIO=y +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +CONFIG_SND_ENS1370=m +CONFIG_SND_ENS1371=m +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +CONFIG_SND_INTEL8X0=m +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_AC97_POWER_SAVE=y + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_USX2Y=m +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +CONFIG_USB_PERSIST=y +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_DPCM=y +CONFIG_USB_STORAGE_USBAT=y +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +CONFIG_USB_STORAGE_ALAUDA=y +# CONFIG_USB_STORAGE_KARMA is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +CONFIG_USB_SERIAL_CP2101=m +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +# CONFIG_MMC_WBSD is not set +# CONFIG_MMC_TIFM_SD is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# +# CONFIG_EDAC is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# +# CONFIG_KVM is not set + +# +# Sysprof +# +CONFIG_SYSPROF=m + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_PROMFS_FS=y +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +# CONFIG_JFFS2_FS_POSIX_ACL is not set +CONFIG_JFFS2_FS_SECURITY=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Instrumentation Support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +CONFIG_KPROBES=y + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_VM=y +CONFIG_DEBUG_LIST=y +# CONFIG_FRAME_POINTER is not set +# CONFIG_FORCED_INLINING is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_LKDTM is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_EARLY_PRINTK=y +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y + +# +# Page alloc debug is incompatible with Software Suspend on i386 +# +CONFIG_DEBUG_RODATA=y +CONFIG_4KSTACKS=y +CONFIG_DOUBLEFAULT=y + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_NETWORK_XFRM=y +CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +# CONFIG_SECURITY_SELINUX_DISABLE is not set +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +# CONFIG_CRYPTO_TWOFISH_586 is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_AES_586=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# +# CONFIG_CRYPTO_DEV_PADLOCK is not set +CONFIG_CRYPTO_DEV_GEODE=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_REED_SOLOMON=y +CONFIG_REED_SOLOMON_DEC16=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_KTIME_SCALAR=y diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/mfgpt.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/mfgpt.c new file mode 100644 index 0000000000..2e62a41e7f --- /dev/null +++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/mfgpt.c @@ -0,0 +1,354 @@ +/* Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT) + * + * Copyright (C) 2006, Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* The MFPGT timers on the CS5536 provide us with suitable timers to use + * as clock event sources - not as good as a HPET or APIC, but certainly + * better then the PIT. This isn't a general purpose MFGPT driver, but + * a simplified one designed specifically to act as a clock event source. + * For full details about the MFGPT, please consult the CS5536 data sheet. +*/ + +/* We are using the 32Khz input clock - its the only one that has the + * ranges we find desirable. The following table lists the suitable + * divisors and the associated hz, minimum interval + * and the maximum interval: + + Divisor Hz Min Delta (S) Max Delta (S) + 1 32000 .0005 2.048 + 2 16000 .001 4.096 + 4 8000 .002 8.192 + 8 4000 .004 16.384 + 16 2000 .008 32.768 + 32 1000 .016 65.536 + 64 500 .032 131.072 + 128 250 .064 262.144 + 256 125 .128 524.288 +*/ + +#include +#include +#include +#include +#include +#include + +#include "do_timer.h" + +#define MFGPT_MAX_TIMERS 8 + +#define F_AVAIL 0x01 + +static struct mfgpt_timer_t { + int flags; + struct module *owner; +} mfgpt_timers[MFGPT_MAX_TIMERS]; + +/* Selected from the table above */ + +#define MFGPT_DIVISOR 16 +#define MFGPT_SCALE 4 /* divisor = 2^(scale) */ +#define MFGPT_HZ (32000 / MFGPT_DIVISOR) +#define MFGPT_PERIODIC (MFGPT_HZ / HZ) + +#ifdef CONFIG_GEODE_MFGPT_TIMER +static int __init mfgpt_timer_setup(void); +#else +#define mfgpt_timer_setup() (0) +#endif + +/* Allow for disabling of MFGPTs */ +static int disable = 0; +static int __init mfgpt_disable(char *s) +{ + disable = 1; + return 1; +} +__setup("nomfgpt", mfgpt_disable); + +/* + * Check whether any MFGPTs are available for the kernel to use. In most + * cases, firmware that uses AMD's VSA code will claim all timers during + * bootup; we certainly don't want to take them if they're already in use. + * In other cases (such as with VSAless OpenFirmware), the system firmware + * leaves timers available for us to use. + */ +int __init geode_mfgpt_detect(void) +{ + int count = 0, i; + u16 val; + + if (disable) { + printk(KERN_INFO "geode-mfgpt: Skipping MFGPT setup\n"); + return 0; + } + + for (i = 0; i < MFGPT_MAX_TIMERS; i++) { + val = geode_mfgpt_read(i, MFGPT_REG_SETUP); + if (!(val & MFGPT_SETUP_SETUP)) { + mfgpt_timers[i].flags = F_AVAIL; + count++; + } + } + + /* set up clock event device, if desired */ + i = mfgpt_timer_setup(); + + return count; +} + +int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable) +{ + u32 msr, mask, value, dummy; + int shift = (cmp == MFGPT_CMP1) ? 0 : 8; + + if (timer < 0 || timer >= MFGPT_MAX_TIMERS) + return -EIO; + + /* + * The register maps for these are described in sections 6.17.1.x of + * the AMD Geode CS5536 Companion Device Data Book. + */ + switch(event) { + case MFGPT_EVENT_RESET: + /* XXX: According to the docs, we cannot reset timers above + * 6; that is, resets for 7 and 8 will be ignored. Is this + * a problem? */ + msr = MFGPT_NR_MSR; + mask = 1 << (timer + 24); + break; + + case MFGPT_EVENT_NMI: + msr = MFGPT_NR_MSR; + mask = 1 << (timer + shift); + break; + + case MFGPT_EVENT_IRQ: + msr = MFGPT_IRQ_MSR; + mask = 1 << (timer + shift); + break; + + default: + return -EIO; + } + + rdmsr(msr, value, dummy); + + if (enable) + value |= mask; + else + value &= ~mask; + + wrmsr(msr, value, dummy); + return 0; +} +EXPORT_SYMBOL(geode_mfgpt_toggle_event); + +int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable) +{ + u32 val, dummy; + int offset; + + if (timer < 0 || timer >= MFGPT_MAX_TIMERS) + return -EIO; + + if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable)) + return -EIO; + + rdmsr(0x51400022, val, dummy); + + offset = (timer % 4) * 4; + + val &= ~((0xF << offset) | (0xF << (offset + 16))); + + if (enable) { + val |= (irq & 0x0F) << (offset); + val |= (irq & 0x0F) << (offset + 16); + } + + wrmsr(0x51400022, val, dummy); + return 0; +} +EXPORT_SYMBOL(geode_mfgpt_set_irq); + +static int mfgpt_get(int timer, struct module *owner) +{ + mfgpt_timers[timer].flags &= ~F_AVAIL; + mfgpt_timers[timer].owner = owner; + printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer); + return timer; +} + +int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner) +{ + int i; + + if (!geode_get_dev_base(GEODE_DEV_MFGPT)) + return -ENODEV; + if (timer >= MFGPT_MAX_TIMERS) + return -EIO; + + if (timer < 0) { + /* Try to find an available timer */ + for (i = 0; i < MFGPT_MAX_TIMERS; i++) { + if (mfgpt_timers[i].flags & F_AVAIL) + return mfgpt_get(i, owner); + + if (i == 5 && domain == MFGPT_DOMAIN_WORKING) + break; + } + } + else { + /* If they requested a specific timer, try to honor that */ + if (mfgpt_timers[timer].flags & F_AVAIL) + return mfgpt_get(timer, owner); + } + + /* No timers available - too bad */ + return -1; +} +EXPORT_SYMBOL(geode_mfgpt_alloc_timer); + +#ifdef CONFIG_GEODE_MFGPT_TIMER + +static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN; +static u16 mfgpt_event_clock; + +static int irq = 7; +static int __init mfgpt_setup(char *str) +{ + get_option(&str, &irq); + return 1; +} +__setup("mfgpt_irq=", mfgpt_setup); + +static inline void mfgpt_disable_timer(u16 clock) +{ + u16 val = geode_mfgpt_read(clock, MFGPT_REG_SETUP); + geode_mfgpt_write(clock, MFGPT_REG_SETUP, val & ~MFGPT_SETUP_CNTEN); +} + +static int mfgpt_next_event(unsigned long, struct clock_event_device *); +static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *); + +static struct clock_event_device mfgpt_clockevent = { + .name = "mfgpt-timer", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = mfgpt_set_mode, + .set_next_event = mfgpt_next_event, + .rating = 250, + .cpumask = CPU_MASK_ALL, + .shift = 32 +}; + +static inline void mfgpt_start_timer(u16 clock, u16 delta) +{ + geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta); + geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0); + + geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, + MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2); +} + +static void mfgpt_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + mfgpt_disable_timer(mfgpt_event_clock); + + if (mode == CLOCK_EVT_MODE_PERIODIC) + mfgpt_start_timer(mfgpt_event_clock, MFGPT_PERIODIC); + + mfgpt_tick_mode = mode; +} + +static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt) +{ + mfgpt_start_timer(mfgpt_event_clock, delta); + return 0; +} + +/* Assume (foolishly?), that this interrupt was due to our tick */ + +static irqreturn_t mfgpt_tick(int irq, void *dev_id) +{ + if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN) + return IRQ_HANDLED; + + /* Turn off the clock */ + mfgpt_disable_timer(mfgpt_event_clock); + + /* Clear the counter */ + geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0); + + /* Restart the clock in periodic mode */ + + if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) { + geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, + MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2); + } + + mfgpt_clockevent.event_handler(&mfgpt_clockevent); + return IRQ_HANDLED; +} + +static struct irqaction mfgptirq = { + .handler = mfgpt_tick, + .flags = IRQF_DISABLED | IRQF_NOBALANCING, + .mask = CPU_MASK_NONE, + .name = "mfgpt-timer" +}; + +static int __init mfgpt_timer_setup(void) +{ + int timer, ret; + u16 val; + + timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING, THIS_MODULE); + if (timer < 0) { + printk(KERN_ERR "mfgpt-timer: Could not allocate a MFPGT timer\n"); + return -ENODEV; + } + + mfgpt_event_clock = timer; + /* Set the clock scale and enable the event mode for CMP2 */ + val = MFGPT_SCALE | (3 << 8); + + geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val); + + /* Set up the IRQ on the MFGPT side */ + if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) { + printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq); + return -EIO; + } + + /* And register it with the kernel */ + ret = setup_irq(irq, &mfgptirq); + + if (ret) { + printk(KERN_ERR "mfgpt-timer: Unable to set up the interrupt.\n"); + goto err; + } + + /* Set up the clock event */ + mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, 32); + mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &mfgpt_clockevent); + mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE, &mfgpt_clockevent); + + printk("mfgpt-timer: registering the MFGT timer as a clock event.\n"); + clockevents_register_device(&mfgpt_clockevent); + + return 0; + +err: + geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq); + printk(KERN_ERR "mfgpt-timer: Unable to set up the MFGPT clock source\n"); + return -EIO; +} + +#endif diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/ofw.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/ofw.c new file mode 100644 index 0000000000..fdcd93629a --- /dev/null +++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/ofw.c @@ -0,0 +1,100 @@ +/* + * ofw.c - Open Firmware client interface for 32-bit systems. + * This code is intended to be portable to any 32-bit Open Firmware + * implementation with a standard client interface that can be + * called when Linux is running. + * + * Copyright (C) 2007 Mitch Bradley + * Copyright (C) 2007 Andres Salomon + */ + +#include +#include +#include +#include + + +int (*call_firmware)(int *); + +static DEFINE_SPINLOCK(prom_lock); + +#define MAXARGS 20 + +/* + * The return value from ofw() in all cases is 0 if the attempt to call the + * function succeeded, <0 otherwise. That return value is from the + * gateway function only. Any results from the called function are returned + * via output argument pointers. + * + * Here are call templates for all the standard OFW client services: + * + * ofw("test", 1, 1, namestr, &missing); + * ofw("peer", 1, 1, phandle, &sibling_phandle); + * ofw("child", 1, 1, phandle, &child_phandle); + * ofw("parent", 1, 1, phandle, &parent_phandle); + * ofw("instance_to_package", 1, 1, ihandle, &phandle); + * ofw("getproplen", 2, 1, phandle, namestr, &proplen); + * ofw("getprop", 4, 1, phandle, namestr, bufaddr, buflen, &size); + * ofw("nextprop", 3, 1, phandle, previousstr, bufaddr, &flag); + * ofw("setprop", 4, 1, phandle, namestr, bufaddr, len, &size); + * ofw("canon", 3, 1, devspecstr, bufaddr, buflen, &length); + * ofw("finddevice", 1, 1, devspecstr, &phandle); + * ofw("instance-to-path", 3, 1, ihandle, bufaddr, buflen, &length); + * ofw("package-to-path", 3, 1, phandle, bufaddr, buflen, &length); + * ofw("call_method", numin, numout, in0, in1, ..., &out0, &out1, ...); + * ofw("open", 1, 1, devspecstr, &ihandle); + * ofw("close", 1, 0, ihandle); + * ofw("read", 3, 1, ihandle, addr, len, &actual); + * ofw("write", 3, 1, ihandle, addr, len, &actual); + * ofw("seek", 3, 1, ihandle, pos_hi, pos_lo, &status); + * ofw("claim", 3, 1, virtaddr, size, align, &baseaddr); + * ofw("release", 2, 0, virtaddr, size); + * ofw("boot", 1, 0, bootspecstr); + * ofw("enter", 0, 0); + * ofw("exit", 0, 0); + * ofw("chain", 5, 0, virtaddr, size, entryaddr, argsaddr, len); + * ofw("interpret", numin+1, numout+1, cmdstr, in0, ..., &catchres, &out0, ...); + * ofw("set-callback", 1, 1, newfuncaddr, &oldfuncaddr); + * ofw("set-symbol-lookup", 2, 0, symtovaladdr, valtosymaddr); + * ofw("milliseconds", 0, 1, &ms); + */ + +int ofw(char *name, int numargs, int numres, ...) +{ + va_list ap; + int argarray[MAXARGS+3]; + int argnum = 3; + int retval; + int *intp; + unsigned long flags; + + if (!call_firmware) + return -1; + if ((numargs + numres) > MAXARGS) + return -1; /* spit out an error? */ + + argarray[0] = (int) name; + argarray[1] = numargs; + argarray[2] = numres; + + va_start(ap, numres); + while (numargs) { + argarray[argnum++] = va_arg(ap, int); + numargs--; + } + + spin_lock_irqsave(&prom_lock, flags); + retval = call_firmware(argarray); + spin_unlock_irqrestore(&prom_lock, flags); + + if (retval == 0) { + while (numres) { + intp = va_arg(ap, int *); + *intp = argarray[argnum++]; + numres--; + } + } + va_end(ap); + return retval; +} +EXPORT_SYMBOL(ofw); diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-pm.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-pm.c new file mode 100644 index 0000000000..93149f1c38 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-pm.c @@ -0,0 +1,785 @@ +/* olpc-pm.c + * © 2006 Red Hat, Inc. + * Portions also copyright 2006 Advanced Micro Devices, Inc. + * GPLv2 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* A few words about accessing the ACPI and PM registers. Long story short, + byte and word accesses of the ACPI and PM registers is broken. The only + way to do it really correctly is to use dword accesses, which we do + throughout this code. For more details, please consult Eratta 17 and 18 + here: + + http://www.amd.com/files/connectivitysolutions/geode/geode_gx/34472D_CS5536_B1_specupdate.pdf +*/ + +#define PM_IRQ 3 + +#define CS5536_PM_PWRBTN (1 << 8) +#define CS5536_PM_RTC (1 << 10) + +#define GPIO_WAKEUP_EC (1 << 31) +#define GPIO_WAKEUP_LID (1 << 30) + +#define PM_MODE_NORMAL 0 +#define PM_MODE_TEST 1 +#define PM_MODE_MAX 2 + +/* These, and the battery EC commands, should be in an olpc.h. */ +#define EC_WRITE_SCI_MASK 0x1b +#define EC_READ_SCI_MASK 0x1c + +extern void do_olpc_suspend_lowlevel(void); + +static struct { + unsigned long address; + unsigned short segment; +} ofw_bios_entry = { 0, __KERNEL_CS }; + +static int olpc_pm_mode = PM_MODE_NORMAL; +static unsigned long acpi_base; +static unsigned long pms_base; +static int sci_irq; +static int olpc_lid_flag; + +static struct input_dev *pm_inputdev; +static struct input_dev *lid_inputdev; +static struct input_dev *ebook_inputdev; +static struct pm_ops olpc_pm_ops; + +static int gpio_wake_events = 0; +static int ebook_state = -1; +static u16 olpc_wakeup_mask = 0; + +struct platform_device olpc_powerbutton_dev = { + .name = "powerbutton", + .id = -1, +}; + +struct platform_device olpc_lid_dev = { + .name = "lid", + .id = -1, +}; + +static void __init init_ebook_state(void) +{ + if (olpc_ec_cmd(0x2a, NULL, 0, (unsigned char *) &ebook_state, 1)) { + printk(KERN_WARNING "olpc-pm: failed to get EBOOK state!\n"); + ebook_state = 0; + } + ebook_state &= 1; + + /* the input layer needs to know what value to default to as well */ + input_report_switch(ebook_inputdev, SW_TABLET_MODE, ebook_state); + input_sync(ebook_inputdev); +} + +static void (*battery_callback)(unsigned long); +static DEFINE_SPINLOCK(battery_callback_lock); + +/* propagate_events is non-NULL if run from workqueue, + NULL when called at init time to flush SCI queue */ +static void process_sci_queue(struct work_struct *propagate_events) +{ + unsigned char data = 0; + unsigned char battery_events = 0; + int ret; + + do { + ret = olpc_ec_cmd(0x84, NULL, 0, &data, 1); + if (!ret) { + printk(KERN_DEBUG "olpc-pm: SCI 0x%x received\n", + data); + + switch (data) { + case EC_SCI_SRC_EMPTY: + case EC_SCI_SRC_GAME: + case EC_SCI_SRC_WLAN: + /* we ignore these for now */ + break; + case EC_SCI_SRC_BATERR: + printk(KERN_ERR "olpc-pm: Battery Management System detected an error! Remove turnip from battery slot.\n"); + case EC_SCI_SRC_BATSOC: + case EC_SCI_SRC_BATTERY: + case EC_SCI_SRC_ACPWR: + battery_events |= data; + break; + case EC_SCI_SRC_EBOOK: + ebook_state = !ebook_state; + if (propagate_events) { + input_report_switch(ebook_inputdev, + SW_TABLET_MODE, ebook_state); + input_sync(ebook_inputdev); + } + break; + default: + printk(KERN_ERR "olpc-pm: Unknown SCI event 0x%x occurred!\n", data); + } + } + } while (data && !ret); + + if (battery_events && battery_callback && propagate_events) { + void (*cbk)(unsigned long); + + /* Older EC versions didn't distinguish between AC and battery + events */ + if (olpc_platform_info.ecver < 0x45) + battery_events = EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR; + + spin_lock(&battery_callback_lock); + cbk = battery_callback; + spin_unlock(&battery_callback_lock); + + cbk(battery_events); + } + + if (ret) + printk(KERN_WARNING "Failed to clear SCI queue!\n"); +} + +static DECLARE_WORK(sci_work, process_sci_queue); + +void olpc_register_battery_callback(void (*f)(unsigned long)) +{ + spin_lock(&battery_callback_lock); + battery_callback = f; + spin_unlock(&battery_callback_lock); +} +EXPORT_SYMBOL_GPL(olpc_register_battery_callback); + +void olpc_deregister_battery_callback(void) +{ + spin_lock(&battery_callback_lock); + battery_callback = NULL; + spin_unlock(&battery_callback_lock); + cancel_work_sync(&sci_work); +} +EXPORT_SYMBOL_GPL(olpc_deregister_battery_callback); + + +static int olpc_pm_interrupt(int irq, void *id) +{ + uint32_t sts, gpe = 0; + + sts = inl(acpi_base + PM1_STS); + outl(sts | 0xFFFF, acpi_base + PM1_STS); + + if (olpc_get_rev() >= OLPC_REV_B2) { + gpe = inl(acpi_base + PM_GPE0_STS); + outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS); + } + + if (sts & CS5536_PM_PWRBTN) { + input_report_key(pm_inputdev, KEY_POWER, 1); + input_sync(pm_inputdev); + printk(KERN_DEBUG "olpm-pm: PM_PWRBTN event received\n"); + /* Do we need to delay this (and hence schedule_work)? */ + input_report_key(pm_inputdev, KEY_POWER, 0); + input_sync(pm_inputdev); + } + + if (gpe & GPIO_WAKEUP_EC) { + geode_gpio_clear(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS); + schedule_work(&sci_work); + } + + if (gpe & GPIO_WAKEUP_LID) { + /* Disable events */ + geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + + /* Clear the edge */ + + if (olpc_lid_flag) + geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); + else + geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); + + /* Clear the status too */ + geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); + geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); + + /* The line is high when the LID is open, but SW_LID + * should be high when the LID is closed, so we pass the old + * value of olpc_lid_flag + */ + + input_report_switch(lid_inputdev, SW_LID, olpc_lid_flag); + input_sync(lid_inputdev); + + /* Swap the status */ + olpc_lid_flag = !olpc_lid_flag; + + if (olpc_lid_flag) + geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); + else + geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); + + /* re-enable the event */ + geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + } + + return IRQ_HANDLED; +} + +/* + * For now, only support STR. We also don't support suspending on + * B1s, due to difficulties with the cafe FPGA. + */ +static int olpc_pm_state_valid(suspend_state_t pm_state) +{ + if (pm_state == PM_SUSPEND_MEM && olpc_rev_after(OLPC_REV_B1)) + return 1; + + return 0; +} + +/* This is a catchall function for operations that just don't belong + * anywhere else. Later we will evaluate if these belong in the + * individual device drivers or the firmware. + * If you add something to this function, please explain yourself with + * a comment. + */ + +extern void gxfb_flatpanel_control(int state); + +static u32 gpio_wakeup[2]; +static u64 irq_sources[4]; +static u64 mfgpt_irq_msr, mfgpt_nr_msr; + +void olpc_fixup_wakeup(void) +{ + u32 base = geode_gpio_base(); + int i; + + /* This clears any pending events from the status register - + * the firmware also does this, but its possible that it tries + * it too early before the key has a chance to debounce + */ + + outl((CS5536_PM_PWRBTN << 16) | 0xFFFF, acpi_base + PM1_STS); + + /* Enable the flatpanel sequencing as early as possible, because + it takes ~64ms to resume. This probably belongs in the firmware */ + + //gxfb_flatpanel_control(1); + + /* Restore the interrupt sources */ + wrmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]); + wrmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]); + wrmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]); + wrmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]); + + /* Restore the X and Y sources for GPIO */ + outl(gpio_wakeup[0], base + GPIO_MAP_X); + outl(gpio_wakeup[1], base + GPIO_MAP_Y); + + /* Resture the MFGPT MSRs */ + wrmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr); + wrmsrl(MFGPT_NR_MSR, mfgpt_nr_msr); + + for (i=0;i<2;i++) { + /* tell the wireless module to restart USB communication */ + olpc_ec_cmd(0x24, NULL, 0, NULL, 0); + } +} + +void olpc_fixup_sleep(void) +{ + u32 base = geode_gpio_base(); + int i; + + /* Save the X and Y sources for GPIO */ + gpio_wakeup[0] = inl(base + GPIO_MAP_X); + gpio_wakeup[1] = inl(base + GPIO_MAP_Y); + + /* Save the Y and Z unrestricted sources */ + + rdmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]); + rdmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]); + rdmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]); + rdmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]); + + /* Turn off the MFGPT timers on the way down */ + + for(i = 0; i < 8; i++) { + u32 val = geode_mfgpt_read(i, MFGPT_REG_SETUP); + + if (val & MFGPT_SETUP_SETUP) { + val &= ~MFGPT_SETUP_CNTEN; + geode_mfgpt_write(i, MFGPT_REG_SETUP, val); + } + } + + /* Save the MFGPT MSRs */ + rdmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr); + rdmsrl(MFGPT_NR_MSR, mfgpt_nr_msr); + + if (device_may_wakeup(&olpc_powerbutton_dev.dev)) + olpc_wakeup_mask |= CS5536_PM_PWRBTN; + else + olpc_wakeup_mask &= ~(CS5536_PM_PWRBTN); + + if (device_may_wakeup(&olpc_lid_dev.dev)) { + geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + gpio_wake_events |= GPIO_WAKEUP_LID; + } else { + geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + gpio_wake_events &= ~(GPIO_WAKEUP_LID); + } +} + +static int olpc_pm_enter(suspend_state_t pm_state) +{ + /* Only STR is supported */ + if (pm_state != PM_SUSPEND_MEM) + return -EINVAL; + + olpc_fixup_sleep(); + + /* Set the GPIO wakeup bits */ + outl(gpio_wake_events, acpi_base + PM_GPE0_EN); + outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS); + + /* Save CPU state */ + do_olpc_suspend_lowlevel(); + + olpc_fixup_wakeup(); + + /* Restore the SCI wakeup events */ + outl(gpio_wake_events, acpi_base + PM_GPE0_EN); + + return 0; +} + +int asmlinkage olpc_do_sleep(u8 sleep_state) +{ + void *pgd_addr = __va(read_cr3()); + printk(KERN_ERR "olpc_do_sleep!\n"); /* this needs to remain here so + * that gcc doesn't optimize + * away our __va! */ + /* FIXME: Set the SCI bits we want to wake up on here */ + + /* FIXME: Set any other SCI events that we might want here */ + + outl((olpc_wakeup_mask << 16) | 0xFFFF, acpi_base + PM1_STS); + + /* If we are in test mode, then just return (simulate a successful + suspend/resume). Otherwise, if we are doing the real thing, + then go for the gusto */ + + if (olpc_pm_mode != PM_MODE_TEST) { + __asm__ __volatile__("movl %0,%%eax" : : "r" (pgd_addr)); + __asm__("call *(%%edi); cld" + : : "D" (&ofw_bios_entry)); + } + + return 0; +} + +/* This code will slowly disappear as we fixup the issues in the BIOS */ + +static void __init olpc_fixup_bios(void) +{ + unsigned long hi, lo; + + if (olpc_has_vsa()) { + /* The VSA aggressively sets up the ACPI and PM register for + * trapping - its not enough to force these values in the BIOS - + * they seem to be changed during PCI init as well. + */ + + /* Change the PM registers to decode to the DD */ + + rdmsr(0x510100e2, lo, hi); + hi |= 0x80000000; + wrmsr(0x510100e2, lo, hi); + + /* Change the ACPI registers to decode to the DD */ + + rdmsr(0x510100e3, lo, hi); + hi |= 0x80000000; + wrmsr(0x510100e3, lo, hi); + } + + /* GPIO24 controls WORK_AUX */ + + geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_ENABLE); + geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_AUX1); + + if (olpc_get_rev() >= OLPC_REV_B2) { + /* GPIO10 is connected to the thermal alarm */ + geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_ENABLE); + geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_AUX1); + + /* Set up to get LID events */ + geode_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_ENABLE); + + /* Clear edge detection and event enable for now */ + geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); + geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); + + geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); + geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); + + /* Set the LID to cause an PME event on group 6 */ + geode_gpio_event_pme(OLPC_GPIO_LID, 6); + + /* Set PME group 6 to fire the SCI interrupt */ + geode_gpio_set_irq(6, sci_irq); + } + + geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_INPUT_ENABLE); + + /* Clear pending events */ + + geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS); + geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS); + + //geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_EN); + geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE); + + /* Set the SCI to cause a PME event on group 7 */ + geode_gpio_event_pme(OLPC_GPIO_ECSCI, 7); + + /* And have group 6 also fire the SCI interrupt */ + geode_gpio_set_irq(7, sci_irq); +} + +/* This provides a control file for setting up testing of the + power management system. For now, there is just one setting: + "test" which means that we don't actually enter the power + off routine. +*/ + +static const char * const pm_states[] = { + [PM_MODE_NORMAL] = "normal", + [PM_MODE_TEST] = "test", +}; + +extern struct mutex pm_mutex; +extern struct kset power_subsys; + +static ssize_t control_show(struct kset *s, char *buf) +{ + return sprintf(buf, "%s\n", pm_states[olpc_pm_mode]); +} + +static ssize_t control_store(struct kset *s, const char *buf, size_t n) +{ + int i, len; + char *p; + + p = memchr(buf, '\n', n); + len = p ? p - buf : n; + + /* Grab the mutex */ + mutex_lock(&pm_mutex); + + for(i = 0; i < PM_MODE_MAX; i++) { + if (!strncmp(buf, pm_states[i], len)) { + olpc_pm_mode = i; + break; + } + } + + mutex_unlock(&pm_mutex); + + return (i == PM_MODE_MAX) ? -EINVAL : n; +} + +static struct subsys_attribute control_attr = { + .attr = { + .name = "olpc-pm", + .mode = 0644, + }, + .show = control_show, + .store = control_store, +}; + +static struct attribute * olpc_attributes[] = { + &control_attr.attr, + NULL +}; + +static struct attribute_group olpc_attrs = { + .attrs = olpc_attributes, +}; + +static int __init alloc_inputdevs(void) +{ + int ret = -ENOMEM; + + pm_inputdev = input_allocate_device(); + if (!pm_inputdev) + goto err; + + pm_inputdev->name = "OLPC PM"; + pm_inputdev->phys = "olpc_pm/input0"; + set_bit(EV_KEY, pm_inputdev->evbit); + set_bit(KEY_POWER, pm_inputdev->keybit); + + ret = input_register_device(pm_inputdev); + if (ret) { + printk(KERN_ERR "olpc-pm: failed to register PM input device: %d\n", ret); + goto err; + } + + lid_inputdev = input_allocate_device(); + if (!lid_inputdev) + goto err; + + lid_inputdev->name = "OLPC lid switch"; + lid_inputdev->phys = "olpc_pm/input1"; + set_bit(EV_SW, lid_inputdev->evbit); + set_bit(SW_LID, lid_inputdev->swbit); + + ret = input_register_device(lid_inputdev); + if (ret) { + printk(KERN_ERR "olpc-pm: failed to register lid input device: %d\n", ret); + goto err; + } + + ebook_inputdev = input_allocate_device(); + if (!ebook_inputdev) + goto err; + + ebook_inputdev->name = "OLPC ebook switch"; + ebook_inputdev->phys = "olpc_pm/input2"; + set_bit(EV_SW, ebook_inputdev->evbit); + set_bit(SW_TABLET_MODE, ebook_inputdev->swbit); + + ret = input_register_device(ebook_inputdev); + if (ret) { + printk(KERN_ERR "olpc-pm: failed to register ebook input device: %d\n", ret); + goto err; + } + + return ret; +err: + if (ebook_inputdev) { + input_unregister_device(ebook_inputdev); + ebook_inputdev = NULL; + } + if (lid_inputdev) { + input_unregister_device(lid_inputdev); + lid_inputdev = NULL; + } + if (pm_inputdev) { + input_unregister_device(pm_inputdev); + pm_inputdev = NULL; + } + + return ret; +} + +static int __init olpc_pm_init(void) +{ + uint32_t lo, hi; + int ret; + uint8_t ec_byte; + + if (!machine_is_olpc()) + return -ENODEV; + + acpi_base = geode_acpi_base(); + pms_base = geode_pms_base(); + + if (!acpi_base || !pms_base) + return -ENODEV; + + ret = alloc_inputdevs(); + if (ret) + return ret; + + rdmsr(0x51400020, lo, hi); + sci_irq = (lo >> 20) & 15; + + if (sci_irq) { + printk(KERN_INFO "SCI is mapped to IRQ %d\n", sci_irq); + } else { + /* Zero doesn't mean zero -- it means masked */ + printk(KERN_INFO "SCI unmapped. Mapping to IRQ 3\n"); + sci_irq = 3; + lo |= 0x00300000; + wrmsrl(0x51400020, lo); + } + + olpc_fixup_bios(); + + lo = inl(pms_base + PM_FSD); + + /* Lock, enable failsafe, 4 seconds */ + outl(0xc001f400, pms_base + PM_FSD); + + /* Here we set up the SCI events we're interested in during + * real-time. We have no sleep button, and the RTC doesn't make + * sense, so set up the power button + */ + + outl(inl(acpi_base) | ((CS5536_PM_PWRBTN) << 16), acpi_base); + + if (olpc_get_rev() >= OLPC_REV_B2) { + gpio_wake_events |= GPIO_WAKEUP_LID; + + /* Get the current value of the GPIO, and set up the edges */ + olpc_lid_flag = geode_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK); + + /* Watch for the opposite edge */ + + if (olpc_lid_flag) + geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); + else + geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); + + /* Enable the event */ + geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + } + + /* Set up the mask for wakeups the EC will generate SCIs on */ + + ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &ec_byte, 1); + if (ret) + printk(KERN_ERR "Error getting the EC SCI mask: %d\n", ret); + + /* Disable battery 1% charge wakeups */ + ec_byte &= ~EC_SCI_SRC_BATSOC; + + ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &ec_byte, 1, NULL, 0); + if (ret) + printk(KERN_ERR "Error setting the EC SCI mask: %d\n", ret); + + /* Set up the EC SCI */ + + gpio_wake_events |= GPIO_WAKEUP_EC; + + outl(gpio_wake_events, acpi_base + PM_GPE0_EN); + outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS); + + /* Select level triggered in PIC */ + + if (sci_irq < 8) { + lo = inb(0x4d0); + lo |= 1 << sci_irq; + outb(lo, 0x4d0); + } else { + lo = inb(0x4d1); + lo |= 1 << (sci_irq - 8); + outb(lo, 0x4d1); + } + /* Clear pending interrupt */ + outl(inl(acpi_base) | 0xFFFF, acpi_base); + process_sci_queue(0); /* we just want to flush the queue here */ + init_ebook_state(); + + /* Enable the interrupt */ + + ret = request_irq(sci_irq, &olpc_pm_interrupt, 0, "SCI", &acpi_base); + + if (ret) { + printk(KERN_ERR "Error registering SCI: %d\n", ret); + return ret; + } + + ofw_bios_entry.address = 0xF0000 + PAGE_OFFSET; + pm_set_ops(&olpc_pm_ops); + + sysfs_create_group(&power_subsys.kobj, &olpc_attrs); + + return 0; +} + + +#if defined (CONFIG_RTC_DRV_CMOS) || defined (CONFIG_RTC_DRV_CMOS_MODULE) +struct resource rtc_platform_resource[2] = { + { + .flags = IORESOURCE_IO, + .start = RTC_PORT(0), + .end = RTC_PORT(0) + RTC_IO_EXTENT + }, + { + .flags = IORESOURCE_IRQ, + .start = 8, + .end = 8, + }, +}; + + +static void rtc_wake_on(struct device *dev) +{ + olpc_wakeup_mask |= CS5536_PM_RTC; +} + +static void rtc_wake_off(struct device *dev) +{ + olpc_wakeup_mask &= ~(CS5536_PM_RTC); +} + +static struct cmos_rtc_board_info rtc_info = { + .rtc_day_alarm = 0, + .rtc_mon_alarm = 0, + .rtc_century = 0, + .wake_on = rtc_wake_on, + .wake_off = rtc_wake_off, +}; + +struct platform_device olpc_rtc_device = { + .name = "rtc_cmos", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_platform_resource), + .dev.platform_data = &rtc_info, + .resource = rtc_platform_resource, +}; + +static int __init olpc_platform_init(void) +{ + (void)platform_device_register(&olpc_rtc_device); + device_init_wakeup(&olpc_rtc_device.dev, 1); + + (void)platform_device_register(&olpc_powerbutton_dev); + device_init_wakeup(&olpc_powerbutton_dev.dev, 1); + + (void)platform_device_register(&olpc_lid_dev); + device_init_wakeup(&olpc_lid_dev.dev, 1); + + return 0; +} +arch_initcall(olpc_platform_init); +#endif /* CONFIG_RTC_DRV_CMOS */ + +static void olpc_pm_exit(void) +{ + /* Clear any pending events, and disable them */ + outl(0xFFFF, acpi_base+2); + + free_irq(sci_irq, &acpi_base); + input_unregister_device(pm_inputdev); + input_unregister_device(lid_inputdev); + input_unregister_device(ebook_inputdev); +} + +static struct pm_ops olpc_pm_ops = { + .valid = olpc_pm_state_valid, + .enter = olpc_pm_enter, +}; + +module_init(olpc_pm_init); +module_exit(olpc_pm_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse "); +MODULE_DESCRIPTION("AMD Geode power management for OLPC CL1"); diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-sleep.S b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-sleep.S new file mode 100644 index 0000000000..9535c9a941 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-sleep.S @@ -0,0 +1,39 @@ +.text + +ENTRY(olpc_sleep_asm) +olpc_sleep: + ;; Get the value of PM1_CNT and store it off + + add 08h, ax + mov bx,dx + in dx,eax + or 2000h, ax + mov ax,di + + ;; flush the cache + wbinvd + + ;; GX2 must disable refresh before going into self-refresh + mov 2000000180xh, ecx + rdmsr + mov eax, esi + and 0FF0000FFh, eax + wrmsr + + ;; Now, put the memory into self refresh + mov 2004, cx + xor edx, edx + xor eax, eax + mov 04h, al + wrmsr + + ;; Thats all she wrote - time to go to sleep + + mov bx, dx + movzx di, eax + out eax, dx + + ;; + + + diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-wakeup.S b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-wakeup.S new file mode 100644 index 0000000000..a92cc61e24 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc-wakeup.S @@ -0,0 +1,122 @@ +.text +#include +#include +#include + +ALIGN + .align 4096 + +wakeup_start: +# jmp wakeup_start + + cli + cld + + # Clear any dangerous flags + + pushl $0 + popfl + + # Set up %cr3 + movl $swsusp_pg_dir - __PAGE_OFFSET, %eax + movl %eax, %cr3 + + movl saved_cr4, %eax + movl %eax, %cr4 + + movl saved_cr0, %eax + movl %eax, %cr0 + + jmp 1f +1: + ljmpl $__KERNEL_CS,$wakeup_return + + +.org 0x1000 + +wakeup_return: + movw $__KERNEL_DS, %ax + movw %ax, %ss + movw %ax, %ds + movw %ax, %es + movw %ax, %fs + movw %ax, %gs + + lgdt saved_gdt + lidt saved_idt + lldt saved_ldt + ljmp $(__KERNEL_CS),$1f +1: + movl %cr3, %eax + movl %eax, %cr3 + wbinvd + + # Go back to the return point + jmp ret_point + +save_registers: + sgdt saved_gdt + sidt saved_idt + sldt saved_ldt + + pushl %edx + movl %cr4, %edx + movl %edx, saved_cr4 + + movl %cr0, %edx + movl %edx, saved_cr0 + + popl %edx + + + movl %ebx, saved_context_ebx + movl %ebp, saved_context_ebp + movl %esi, saved_context_esi + movl %edi, saved_context_edi + + pushfl + popl saved_context_eflags + + ret + + +restore_registers: + movl saved_context_ebp, %ebp + movl saved_context_ebx, %ebx + movl saved_context_esi, %esi + movl saved_context_edi, %edi + + pushl saved_context_eflags + popfl + + ret + + +ENTRY(do_olpc_suspend_lowlevel) + call save_processor_state + call save_registers + + # This is the stack context we want to remember + movl %esp, saved_context_esp + + pushl $3 + call olpc_do_sleep + + jmp wakeup_start + .p2align 4,,7 +ret_point: + movl saved_context_esp, %esp + + call restore_registers + call restore_processor_state + ret + +.data +ALIGN + +saved_gdt: .long 0,0 +saved_idt: .long 0,0 +saved_ldt: .long 0 +saved_cr4: .long 0 +saved_cr0: .long 0 + diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc.c new file mode 100644 index 0000000000..d540cb0eae --- /dev/null +++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/olpc.c @@ -0,0 +1,320 @@ +/* Support for the OLPC DCON and OLPC EC access + * Copyright (C) 2006, Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +/* This is our new multi-purpose structure used to contain the + * information about the platform that we detect + */ + +struct olpc_platform_t olpc_platform_info; +EXPORT_SYMBOL_GPL(olpc_platform_info); + +/********************************************************************* + * EC locking and access + *********************************************************************/ + +static DEFINE_SPINLOCK(ec_lock); + +/* what the timeout *should* be (in ms) */ +#define EC_BASE_TIMEOUT 20 + +/* the timeout that bugs in the EC might force us to actually use */ +static int ec_timeout = EC_BASE_TIMEOUT; + +static int __init olpc_ec_timeout_set(char *str) +{ + if (get_option(&str, &ec_timeout) != 1) { + ec_timeout = EC_BASE_TIMEOUT; + printk(KERN_ERR "olpc-ec: invalid argument to " + "'olpc_ec_timeout=', ignoring!\n"); + } + printk(KERN_DEBUG "olpc-ec: using %d ms delay for EC commands.\n", + ec_timeout); + return 1; +} +__setup("olpc_ec_timeout=", olpc_ec_timeout_set); + +/* + * These *bf_status functions return whether the buffers are full or not. + */ + +static inline unsigned int ibf_status(unsigned int port) +{ + return inb(port) & 0x02; +} + +static inline unsigned int obf_status(unsigned int port) +{ + return inb(port) & 0x01; +} + +#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d)) +static int __wait_on_ibf(unsigned int line, unsigned int port, int desired) +{ + unsigned int timeo; + int state = ibf_status(port); + + for (timeo = ec_timeout; state != desired && timeo; timeo--) { + mdelay(1); + state = ibf_status(port); + } + + if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) && + timeo < (ec_timeout - EC_BASE_TIMEOUT)) { + printk(KERN_WARNING "olpc-ec: waited %u ms for IBF (%d)!\n", + EC_BASE_TIMEOUT-timeo, line); + } + + return !(state == desired); +} + +#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d)) +static int __wait_on_obf(unsigned int line, unsigned int port, int desired) +{ + unsigned int timeo; + int state = obf_status(port); + + for (timeo = ec_timeout; state != desired && timeo; timeo--) { + mdelay(1); + state = obf_status(port); + } + + if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) && + timeo < (ec_timeout - EC_BASE_TIMEOUT)) { + printk(KERN_WARNING "olpc-ec: waited %u ms for OBF (%d)!\n", + EC_BASE_TIMEOUT-timeo, line); + } + + return !(state == desired); +} + +int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, + unsigned char *outbuf, size_t outlen) +{ + unsigned long flags; + int ret = -EIO; + int i; + + spin_lock_irqsave(&ec_lock, flags); + + if (wait_on_ibf(0x6c, 0)) { + printk(KERN_ERR "olpc-ec: timeout waiting for EC to " + "quiesce!\n"); + goto err; + } + +restart: + /* + * Note that if we time out during any IBF checks, that's a failure; + * we have to return. There's no way for the kernel to clear that. + * + * If we time out during an OBF check, we can restart the command; + * reissuing it will clear the OBF flag, and we should be alright. + * The OBF flag will sometimes misbehave due to what we believe + * is a hardware quirk.. + */ + printk(KERN_DEBUG "olpc-ec: running cmd 0x%x\n", cmd); + outb(cmd, 0x6c); + + if (wait_on_ibf(0x6c, 0)) { + printk(KERN_ERR "olpc-ec: timeout waiting for EC to read " + "command!\n"); + goto err; + } + + if (inbuf && inlen) { + /* write data to EC */ + for (i = 0; i < inlen; i++) { + if (wait_on_ibf(0x6c, 0)) { + printk(KERN_ERR "olpc-ec: timeout waiting for" + " EC accept data!\n"); + goto err; + } + printk(KERN_DEBUG "olpc-ec: sending cmd arg 0x%x\n", + inbuf[i]); + outb(inbuf[i], 0x68); + } + } + if (outbuf && outlen) { + /* read data from EC */ + for (i = 0; i < outlen; i++) { + if (wait_on_obf(0x6c, 1)) { + printk(KERN_ERR "olpc-ec: timeout waiting for" + " EC to provide data!\n"); + goto restart; + } + outbuf[i] = inb(0x68); + printk(KERN_DEBUG "olpc-ec: received 0x%x\n", + outbuf[i]); + } + } + + ret = 0; +err: + spin_unlock_irqrestore(&ec_lock, flags); + return ret; +} +EXPORT_SYMBOL_GPL(olpc_ec_cmd); + +/********************************************************************* + * DCON stuff + *********************************************************************/ + +static void olpc_power_off(void) +{ + printk(KERN_INFO "OLPC power off sequence...\n"); + outb(0xff, 0x381); + outb(0x14, 0x382); + outb(0x01, 0x383); + outb(0xff, 0x381); + outb(0x14, 0x382); + outb(0x00, 0x383); +} + +static void __init +ec_detect(void) +{ + olpc_ec_cmd(0x08, NULL, 0, (unsigned char *) &olpc_platform_info.ecver, 1); +} + +/* Check to see if this version of the OLPC board has VSA built + * in, and set a flag + */ + +static void __init vsa_detect(void) +{ + u16 rev; + + outw(0xFC53, 0xAC1C); + outw(0x0003, 0xAC1C); + + rev = inw(0xAC1E); + + if (rev == 0x4132) + olpc_platform_info.flags |= OLPC_F_VSA; +} + +/* Map OFW revisions to what OLPC_REV_* */ +static const char __initdata *olpc_boardrev_str[] = { + "A1", + "preB1", + "B1", + "preB2", + "B2", + "preB3", + "B3", + "B4", + "C1", + "R1", +}; + +static void __init platform_detect(char *revision, size_t len) +{ + size_t propsize; + int i; + + BUG_ON(ARRAY_SIZE(olpc_boardrev_str) != OLPC_REV_UNKNOWN); + + if (ofw("getprop", 4, 1, NULL, "model", revision, len, &propsize)) { + printk(KERN_ERR "ofw: getprop call failed!\n"); + goto failed; + } + if (len < propsize) { + printk(KERN_ERR "ofw: revision string is too long!\n"); + goto failed; + } + + for (i=0; i < ARRAY_SIZE(olpc_boardrev_str); i++) { + if (strcmp(revision, olpc_boardrev_str[i]) == 0) { + olpc_platform_info.boardrev = i; + return; + } + } + +failed: + strncpy(revision, "Unknown", len); + olpc_platform_info.boardrev = OLPC_REV_UNKNOWN; +} + +static int olpc_dcon_present = -1; +module_param(olpc_dcon_present, int, 0444); + +/* REV_A CMOS map: + * bit 440; DCON present bit + */ + +#define OLPC_CMOS_DCON_OFFSET (440 / 8) +#define OLPC_CMOS_DCON_MASK 0x01 + +static int __init olpc_init(void) +{ + unsigned char *romsig; + char revision[10]; + + spin_lock_init(&ec_lock); + + romsig = ioremap(0xffffffc0, 16); + + if (!romsig) + return 0; + + if (strncmp(romsig, "CL1 Q", 7)) + goto unmap; + if (strncmp(romsig+6, romsig+13, 3)) { + printk(KERN_INFO "OLPC BIOS signature looks invalid. Assuming not OLPC\n"); + goto unmap; + } + printk(KERN_INFO "OLPC board with OpenFirmware: %.16s\n", romsig); + + olpc_platform_info.flags |= OLPC_F_PRESENT; + + pm_power_off = olpc_power_off; + + /* Get the platform revision */ + platform_detect(revision, sizeof(revision)); + + /* If olpc_dcon_present isn't set by the command line, then + * "detect" it + */ + + if (olpc_dcon_present == -1) { + /* B1 and greater always has a DCON */ + if (olpc_platform_info.boardrev >= OLPC_REV_B1 && + olpc_platform_info.boardrev < OLPC_REV_UNKNOWN) + olpc_dcon_present = 1; + } + + if (olpc_dcon_present) + olpc_platform_info.flags |= OLPC_F_DCON; + + /* Get the EC revision */ + ec_detect(); + + /* Check to see if the VSA exists */ + vsa_detect(); + + printk(KERN_INFO "OLPC board revision: %s (EC=%x)\n", revision, + olpc_platform_info.ecver); + + unmap: + iounmap(romsig); + + return 0; +} + +postcore_initcall(olpc_init); diff --git a/target/linux/olpc/files-2.6.23/arch/i386/kernel/prom.c b/target/linux/olpc/files-2.6.23/arch/i386/kernel/prom.c new file mode 100644 index 0000000000..d64bb276f2 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/arch/i386/kernel/prom.c @@ -0,0 +1,478 @@ +/* + * Procedures for creating, accessing and interpreting the device tree. + * + * Paul Mackerras August 1996. + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. + * {engebret|bergner}@us.ibm.com + * + * Adapted for sparc64 by David S. Miller davem@davemloft.net + * + * Adapter for i386/OLPC by Andres Salomon + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * XXX: This is very much a stub; right now we're keeping 2 device trees + * in memory (one for promfs, and one here). That will not remain + * for long! + */ + +static struct device_node *allnodes; + +/* use when traversing tree through the allnext, child, sibling, + * or parent members of struct device_node. + */ +static DEFINE_RWLOCK(devtree_lock); + +int of_device_is_compatible(const struct device_node *device, + const char *compat) +{ + const char* cp; + int cplen, l; + + cp = of_get_property(device, "compatible", &cplen); + if (cp == NULL) + return 0; + while (cplen > 0) { + if (strncmp(cp, compat, strlen(compat)) == 0) + return 1; + l = strlen(cp) + 1; + cp += l; + cplen -= l; + } + + return 0; +} +EXPORT_SYMBOL(of_device_is_compatible); + +struct device_node *of_get_parent(const struct device_node *node) +{ + struct device_node *np; + + if (!node) + return NULL; + + np = node->parent; + + return np; +} +EXPORT_SYMBOL(of_get_parent); + +struct device_node *of_get_next_child(const struct device_node *node, + struct device_node *prev) +{ + struct device_node *next; + + next = prev ? prev->sibling : node->child; + for (; next != 0; next = next->sibling) { + break; + } + + return next; +} +EXPORT_SYMBOL(of_get_next_child); + +struct device_node *of_find_node_by_path(const char *path) +{ + struct device_node *np = allnodes; + + for (; np != 0; np = np->allnext) { + if (np->full_name != 0 && strcmp(np->full_name, path) == 0) + break; + } + + return np; +} +EXPORT_SYMBOL(of_find_node_by_path); + +struct device_node *of_find_node_by_phandle(phandle handle) +{ + struct device_node *np; + + for (np = allnodes; np != 0; np = np->allnext) + if (np->node == handle) + break; + + return np; +} +EXPORT_SYMBOL(of_find_node_by_phandle); + +struct device_node *of_find_node_by_name(struct device_node *from, + const char *name) +{ + struct device_node *np; + + np = from ? from->allnext : allnodes; + for (; np != NULL; np = np->allnext) + if (np->name != NULL && strcmp(np->name, name) == 0) + break; + + return np; +} +EXPORT_SYMBOL(of_find_node_by_name); + +struct device_node *of_find_node_by_type(struct device_node *from, + const char *type) +{ + struct device_node *np; + + np = from ? from->allnext : allnodes; + for (; np != 0; np = np->allnext) + if (np->type != 0 && strcmp(np->type, type) == 0) + break; + + return np; +} +EXPORT_SYMBOL(of_find_node_by_type); + +struct device_node *of_find_compatible_node(struct device_node *from, + const char *type, const char *compatible) +{ + struct device_node *np; + + np = from ? from->allnext : allnodes; + for (; np != 0; np = np->allnext) { + if (type != NULL + && !(np->type != 0 && strcmp(np->type, type) == 0)) + continue; + if (of_device_is_compatible(np, compatible)) + break; + } + + return np; +} +EXPORT_SYMBOL(of_find_compatible_node); + +struct property *of_find_property(const struct device_node *np, + const char *name, + int *lenp) +{ + struct property *pp; + + for (pp = np->properties; pp != 0; pp = pp->next) { + if (strcasecmp(pp->name, name) == 0) { + if (lenp != 0) + *lenp = pp->length; + break; + } + } + return pp; +} +EXPORT_SYMBOL(of_find_property); + +/* + * Find a property with a given name for a given node + * and return the value. + */ +const void *of_get_property(const struct device_node *np, const char *name, + int *lenp) +{ + struct property *pp = of_find_property(np,name,lenp); + return pp ? pp->value : NULL; +} +EXPORT_SYMBOL(of_get_property); + +int of_getintprop_default(struct device_node *np, const char *name, int def) +{ + struct property *prop; + int len; + + prop = of_find_property(np, name, &len); + if (!prop || len != 4) + return def; + + return *(int *) prop->value; +} +EXPORT_SYMBOL(of_getintprop_default); + +int of_n_addr_cells(struct device_node *np) +{ + const int* ip; + do { + if (np->parent) + np = np->parent; + ip = of_get_property(np, "#address-cells", NULL); + if (ip != NULL) + return *ip; + } while (np->parent); + /* No #address-cells property for the root node, default to 2 */ + return 2; +} +EXPORT_SYMBOL(of_n_addr_cells); + +int of_n_size_cells(struct device_node *np) +{ + const int* ip; + do { + if (np->parent) + np = np->parent; + ip = of_get_property(np, "#size-cells", NULL); + if (ip != NULL) + return *ip; + } while (np->parent); + /* No #size-cells property for the root node, default to 1 */ + return 1; +} +EXPORT_SYMBOL(of_n_size_cells); + +int of_set_property(struct device_node *dp, const char *name, void *val, int len) +{ + return -EIO; +} +EXPORT_SYMBOL(of_set_property); + +static unsigned int prom_early_allocated; + +static void * __init prom_early_alloc(unsigned long size) +{ + void *ret; + + ret = kmalloc(size, GFP_KERNEL); + if (ret != NULL) + memset(ret, 0, size); + else + printk(KERN_ERR "ACK! couldn't allocate prom memory!\n"); + + prom_early_allocated += size; + + return ret; +} + +static int is_root_node(const struct device_node *dp) +{ + if (!dp) + return 0; + + return (dp->parent == NULL); +} + +static char * __init build_path_component(struct device_node *dp) +{ + int pathlen; + char *n, *i; + + if (ofw("package-to-path", 3, 1, dp->node, NULL, 0, &pathlen)) { + printk(KERN_ERR "PROM: unable to get path name from OFW!\n"); + return "ERROR"; + } + n = prom_early_alloc(pathlen + 1); + if (ofw("package-to-path", 3, 1, dp->node, n, pathlen+1, &pathlen)) + printk(KERN_ERR "PROM: unable to get path name from OFW\n"); + + if ((i = strrchr(n, '/'))) + n = ++i; /* we only want the file name */ + return n; +} + +static char * __init build_full_name(struct device_node *dp) +{ + int len, ourlen, plen; + char *n; + + plen = strlen(dp->parent->full_name); + ourlen = strlen(dp->path_component_name); + len = ourlen + plen + 2; + + n = prom_early_alloc(len); + strcpy(n, dp->parent->full_name); + if (!is_root_node(dp->parent)) { + strcpy(n + plen, "/"); + plen++; + } + strcpy(n + plen, dp->path_component_name); + + return n; +} + +static struct property * __init build_one_prop(phandle node, char *prev, char *special_name, void *special_val, int special_len) +{ + static struct property *tmp = NULL; + struct property *p; + + if (tmp) { + p = tmp; + memset(p, 0, sizeof(*p) + 32); + tmp = NULL; + } else { + p = prom_early_alloc(sizeof(struct property) + 32); + } + + p->name = (char *) (p + 1); + if (special_name) { + strcpy(p->name, special_name); + p->length = special_len; + p->value = prom_early_alloc(special_len); + memcpy(p->value, special_val, special_len); + } else { + int fl; + if (prev == NULL) { + if (ofw("nextprop", 3, 1, node, "", p->name, &fl)) { + printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__); + return NULL; + } + } else { + if (ofw("nextprop", 3, 1, node, prev, p->name, &fl)) { + printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__); + return NULL; + } + } + if (strlen(p->name) == 0 || fl != 1) { + tmp = p; + return NULL; + } + if (ofw("getproplen", 2, 1, node, p->name, &p->length)) { + printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__); + return NULL; + } + if (p->length <= 0) { + p->length = 0; + } else { + p->value = prom_early_alloc(p->length + 1); + if (ofw("getprop", 4, 1, node, p->name, p->value, p->length, &p->length)) { + printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__); + return NULL; + } + ((unsigned char *)p->value)[p->length] = '\0'; + } + } + return p; +} + +static struct property * __init build_prop_list(phandle node) +{ + struct property *head, *tail; + + head = tail = build_one_prop(node, NULL, + ".node", &node, sizeof(node)); + + tail->next = build_one_prop(node, NULL, NULL, NULL, 0); + tail = tail->next; + while(tail) { + tail->next = build_one_prop(node, tail->name, + NULL, NULL, 0); + tail = tail->next; + } + + return head; +} + +static char * __init get_one_property(phandle node, const char *name) +{ + char *buf = ""; + int len; + + if (ofw("getproplen", 2, 1, node, name, &len)) { + printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__); + return NULL; + } + if (len > 0) { + buf = prom_early_alloc(len); + if (ofw("getprop", 4, 1, node, name, buf, len, &len)) { + printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__); + return NULL; + } + } + + return buf; +} + +static struct device_node * __init create_node(phandle node, struct device_node *parent) +{ + struct device_node *dp; + + if (!node) + return NULL; + + dp = prom_early_alloc(sizeof(*dp)); + dp->parent = parent; + + kref_init(&dp->kref); + + dp->name = get_one_property(node, "name"); + dp->type = get_one_property(node, "device_type"); + dp->node = node; + + dp->properties = build_prop_list(node); + + return dp; +} + +static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp) +{ + struct device_node *ret = NULL, *prev_sibling = NULL; + struct device_node *dp; + u32 child; + + while (1) { + dp = create_node(node, parent); + if (!dp) + break; + + if (prev_sibling) + prev_sibling->sibling = dp; + + if (!ret) + ret = dp; + prev_sibling = dp; + + *(*nextp) = dp; + *nextp = &dp->allnext; + + dp->path_component_name = build_path_component(dp); + dp->full_name = build_full_name(dp); + + if (ofw("child", 1, 1, node, &child)) { + printk(KERN_ERR "PROM: %s: fetching child failed!\n", __func__); + return NULL; + } + dp->child = build_tree(dp, child, nextp); + + if (ofw("peer", 1, 1, node, &node)) { + printk(KERN_ERR "PROM: %s: fetching peer failed!\n", __func__); + return NULL; + } + } + + return ret; +} + +static phandle root_node; + +void __init prom_build_devicetree(void) +{ + struct device_node **nextp; + u32 child; + + if (ofw("peer", 1, 1, 0, &root_node)) { + printk(KERN_ERR "PROM: unable to get root node from OFW!\n"); + return; + } + + allnodes = create_node(root_node, NULL); + allnodes->path_component_name = ""; + allnodes->full_name = "/"; + + nextp = &allnodes->allnext; + if (ofw("child", 1, 1, allnodes->node, &child)) { + printk(KERN_ERR "PROM: unable to get child node from OFW!\n"); + return; + } + allnodes->child = build_tree(allnodes, child, &nextp); + printk("PROM: Built device tree with %u bytes of memory.\n", + prom_early_allocated); +} diff --git a/target/linux/olpc/files-2.6.23/arch/i386/pci/olpc.c b/target/linux/olpc/files-2.6.23/arch/i386/pci/olpc.c new file mode 100644 index 0000000000..1518d254c5 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/arch/i386/pci/olpc.c @@ -0,0 +1,298 @@ +/* + * olpcpci.c - Low-level PCI config space access for OLPC systems + * without the VSA PCI virtualization software. + * + * The AMD Geode chipset (GX2 processor, cs5536 I/O companion device) + * has some I/O functions (display, southbridge, sound, USB HCIs, etc) + * that more or less behave like PCI devices, but the hardware doesn't + * directly implement the PCI configuration space headers. AMD provides + * "VSA" (Virtual System Architecture) software that emulates PCI config + * space for these devices, by trapping I/O accesses to PCI config register + * (CF8/CFC) and running some code in System Management Mode interrupt state. + * On the OLPC platform, we don't want to use that VSA code because + * (a) it slows down suspend/resume, and (b) recompiling it requires special + * compilers that are hard to get. So instead of letting the complex VSA + * code simulate the PCI config registers for the on-chip devices, we + * just simulate them the easy way, by inserting the code into the + * pci_write_config and pci_read_config path. Most of the config registers + * are read-only anyway, so the bulk of the simulation is just table lookup. + */ + +#include +#include +#include +#include +#include "pci.h" + +static int is_lx; + +/* + * In the tables below, the first two line (8 longwords) are the + * size masks that are used when the higher level PCI code determines + * the size of the region by writing ~0 to a base address register + * and reading back the result. + * + * The following lines are the values that are read during normal + * PCI config access cycles, i.e. not after just having written + * ~0 to a base address register. + */ + +static const u32 lxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x281022 , 0x2200005 , 0x6000021 , 0x80f808 , /* AMD Vendor ID */ + 0x0 , 0x0 , 0x0 , 0x0 , /* No virtual registers, hence no BAR for them */ + 0x0 , 0x0 , 0x0 , 0x28100b , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 gxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ + 0xfffffffd , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x28100b , 0x2200005 , 0x6000021 , 0x80f808 , /* NSC Vendor ID */ + 0xac1d , 0x0 , 0x0 , 0x0 , /* I/O BAR - base of virtual registers */ + 0x0 , 0x0 , 0x0 , 0x28100b , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 lxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ + 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x20811022 , 0x2200003 , 0x3000000 , 0x0 , /* AMD Vendor ID */ + 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */ + 0xfe00c000 , 0x0 , 0x0 , 0x30100b , /* VIP */ + 0x0 , 0x0 , 0x0 , 0x10e , /* INTA, IRQ14 for graphics accel */ + 0x0 , 0x0 , 0x0 , 0x0 , + 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */ + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 gxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ + 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x30100b , 0x2200003 , 0x3000000 , 0x0 , /* NSC Vendor ID */ + 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */ + 0x0 , 0x0 , 0x0 , 0x30100b , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */ + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 aes_hdr[] = { /* dev 1 function 2 - devfn = 0xa */ + 0xffffc000 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x20821022 , 0x2a00006 , 0x10100000 , 0x8 , /* NSC Vendor ID */ + 0xfe010000 , 0x0 , 0x0 , 0x0 , /* AES registers */ + 0x0 , 0x0 , 0x0 , 0x20821022 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , +}; + + +static const u32 isa_hdr[] = { /* dev f function 0 - devfn = 78 */ + 0xfffffff9 , 0xffffff01 , 0xffffffc1 , 0xffffffe1 , + 0xffffff81 , 0xffffffc1 , 0x0 , 0x0 , + + 0x20901022 , 0x2a00049 , 0x6010003 , 0x802000 , + 0x18b1 , 0x1001 , 0x1801 , 0x1881 , /* SMB-8 GPIO-256 MFGPT-64 IRQ-32 */ + 0x1401 , 0x1841 , 0x0 , 0x20901022 , /* PMS-128 ACPI-64 */ + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0xaa5b , /* interrupt steering */ + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 ac97_hdr[] = { /* dev f function 3 - devfn = 7b */ + 0xffffff81 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x20931022 , 0x2a00041 , 0x4010001 , 0x0 , + 0x1481 , 0x0 , 0x0 , 0x0 , /* I/O BAR-128 */ + 0x0 , 0x0 , 0x0 , 0x20931022 , + 0x0 , 0x0 , 0x0 , 0x205 , /* IntB , IRQ5 */ + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 ohci_hdr[] = { /* dev f function 4 - devfn = 7c */ + 0xfffff000 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x20941022 , 0x2300006 , 0xc031002 , 0x0 , + 0xfe01a000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */ + 0x0 , 0x0 , 0x0 , 0x20941022 , + 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */ + 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */ + 0x0 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , +}; + +static const u32 ehci_hdr[] = { /* dev f function 4 - devfn = 7d */ + 0xfffff000 , 0x0 , 0x0 , 0x0 , + 0x0 , 0x0 , 0x0 , 0x0 , + + 0x20951022 , 0x2300006 , 0xc032002 , 0x0 , + 0xfe01b000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */ + 0x0 , 0x0 , 0x0 , 0x20951022 , + 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */ + 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */ +#if 0 + 0x1 , 0x40080000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */ +#endif + 0x01000001 , 0x00000000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */ + 0x2020 , 0x0 , 0x0 , 0x0 , /* (EHCI page 8) 60 SBRN (R/O), 61 FLADJ (R/W), PORTWAKECAP */ +}; + +static u32 ff_loc = ~0; +static u32 zero_loc = 0; + +static int bar_probing = 0; /* Set after a write of ~0 to a BAR */ + +#define NB_SLOT 0x1 /* Northbridge - GX chip - Device 1 */ +#define SB_SLOT 0xf /* Southbridge - CS5536 chip - Device F */ +#define SIMULATED(bus, devfn) (((bus) == 0) && ((PCI_SLOT(devfn) == NB_SLOT) || (PCI_SLOT(devfn) == SB_SLOT))) + +static u32 *hdr_addr(const u32 *hdr, int reg) +{ + u32 addr; + + /* + * This is a little bit tricky. The header maps consist of + * 0x20 bytes of size masks, followed by 0x70 bytes of header data. + * In the normal case, when not probing a BAR's size, we want + * to access the header data, so we add 0x20 to the reg offset, + * thus skipping the size mask area. + * In the BAR probing case, we want to access the size mask for + * the BAR, so we subtract 0x10 (the config header offset for + * BAR0), and don't skip the size mask area. + */ + + addr = (u32)hdr + reg + (bar_probing ? -0x10 : 0x20); + + bar_probing = 0; + return (u32 *)addr; +} + +static int pci_olpc_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 *value) +{ + u32 *addr; + + /* Use the hardware mechanism for non-simulated devices */ + if (!SIMULATED(bus, devfn)) + return pci_conf1_read(seg, bus, devfn, reg, len, value); + + /* + * No device has config registers past 0x70, so we save table space + * by not storing entries for the nonexistent registers + */ + if (reg >= 0x70) + addr = &zero_loc; + else { + switch (devfn) { + case 0x8: + addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg); + break; + case 0x9: + addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg); + break; + case 0xa: + addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc; + break; + case 0x78: + addr = hdr_addr(isa_hdr, reg); + break; + case 0x7b: + addr = hdr_addr(ac97_hdr, reg); + break; + case 0x7c: + addr = hdr_addr(ohci_hdr, reg); + break; + case 0x7d: + addr = hdr_addr(ehci_hdr, reg); + break; + default: + addr = &ff_loc; + break; + } + } + switch (len) { + case 1: + *value = *(u8 *) addr; + break; + case 2: + *value = *(u16 *) addr; + break; + case 4: + *value = *addr; + break; + default: + BUG(); + } + + return 0; +} + +static int pci_olpc_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 value) +{ + /* Use the hardware mechanism for non-simulated devices */ + if (!SIMULATED(bus, devfn)) + return pci_conf1_write(seg, bus, devfn, reg, len, value); + + /* XXX we may want to extend this to simulate EHCI power management */ + + /* + * Mostly we just discard writes, but if the write is a size probe + * (i.e. writing ~0 to a BAR), we remember it and arrange to return + * the appropriate size mask on the next read. This is cheating + * to some extent, because it depends on the fact that the next + * access after such a write will always be a read to the same BAR. + */ + + if ((reg >= 0x10) && (reg < 0x2c)) { + /* Write is to a BAR */ + if (value == ~0) + bar_probing = 1; + } else { + /* + * No warning on writes to ROM BAR, CMD, LATENCY_TIMER, + * CACHE_LINE_SIZE, or PM registers. + */ + if ((reg != 0x30) && (reg != 0x04) && (reg != 0x0d) && + (reg != 0x0c) && (reg != 0x44)) + printk(KERN_WARNING "OLPC PCI: Config write to devfn %x reg %x value %x\n", devfn, reg, value); + } + + return 0; +} + +static struct pci_raw_ops pci_olpc_conf = { + .read = pci_olpc_read, + .write = pci_olpc_write, +}; + +void __init pci_olpc_init(void) +{ + if (!machine_is_olpc() || olpc_has_vsa()) + return; + + printk(KERN_INFO "PCI: Using configuration type OLPC\n"); + raw_pci_ops = &pci_olpc_conf; + is_lx = is_geode_lx(); +} diff --git a/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.c b/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.c new file mode 100644 index 0000000000..dc575ac062 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.c @@ -0,0 +1,554 @@ +/* + * OLPC touchpad PS/2 mouse driver + * + * Copyright (c) 2006 One Laptop Per Child, inc. + * Authors Zephaniah E. Hull and Andres Salomon + * + * This driver is partly based on the ALPS driver, which is: + * + * Copyright (c) 2003 Neil Brown + * Copyright (c) 2003-2005 Peter Osterlund + * Copyright (c) 2004 Dmitry Torokhov + * Copyright (c) 2005 Vojtech Pavlik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * The touchpad on the OLPC is fairly wide, with the entire area usable + * as a tablet ("PT mode"), and the center 1/3rd also usable as a touchpad + * ("GS mode"). + * + * Earlier version of the device had simultaneous reporting; however, that + * was removed. Instead, the device now reports packets in one mode, and + * tells the driver when a mode switch needs to happen. + */ + +#include +#include +#include +#include +#include + +#include "psmouse.h" +#include "olpc.h" + +static int tpdebug; +module_param(tpdebug, int, 0644); + +#define OLPC_GS 1 /* The GS sensor. */ +#define OLPC_PT 2 /* The PT sensor. */ + +static struct olpc_model_info olpc_model_data[] = { + { { 0x67, 0x00, 0x00 }, OLPC_GS | OLPC_PT }, /* unknown ID */ + { { 0x67, 0x00, 0x0a }, OLPC_GS | OLPC_PT }, /* pre-B1 */ + { { 0x67, 0x00, 0x14 }, OLPC_GS }, /* B1.*/ + { { 0x67, 0x00, 0x28 }, OLPC_GS | OLPC_PT }, /* B2 */ + { { 0x67, 0x00, 0x3c }, OLPC_GS | OLPC_PT }, /* B2-2 */ + { { 0x67, 0x00, 0x50 }, OLPC_GS | OLPC_PT }, /* C1 */ +}; + +#define OLPC_PKT_PT 0xcf +#define OLPC_PKT_GS 0xff + +static int olpc_absolute_mode(struct psmouse *psmouse, int mode); + +/* + * OLPC absolute Mode - single-mode format + * + * byte 0: 1 1 0 0 1 1 1 1 + * byte 1: 0 x6 x5 x4 x3 x2 x1 x0 + * byte 2(PT): 0 0 x9 x8 x7 ? pt-dsw gs-dsw + * byte 2(GS): 0 x10 x9 x8 x7 ? gs-dsw pt-dsw + * byte 3: 0 y9 y8 y7 1 0 swr swl + * byte 4: 0 y6 y5 y4 y3 y2 y1 y0 + * byte 5: 0 z6 z5 z4 z3 z2 z1 z0 + * + * ?'s are not defined in the protocol spec, may vary between models. + * + * swr/swl are the left/right buttons. + * + * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a + * pen/finger + */ + +static void olpc_process_packet_gspt(struct psmouse *psmouse) +{ + struct olpc_data *priv = psmouse->private; + unsigned char *packet = psmouse->packet; + struct input_dev *dev = psmouse->dev; + struct input_dev *dev2 = priv->dev2; + int x, y, z, gs_down = 0, pt_down = 0, left, right; + struct timeval now_tv; + s64 now_ns; + + left = packet[3] & 1; + right = packet[3] & 2; + x = packet[1] | ((packet[2] & 0x78) << 4); + y = packet[4] | ((packet[3] & 0x70) << 3); + z = packet[5]; + + if (psmouse->packet[0] == OLPC_PKT_GS) { + pt_down = !!(packet[2] & 1); + gs_down = !!(packet[2] & 2); + } else if (psmouse->packet[0] == OLPC_PKT_PT) { + gs_down = !!(packet[2] & 1); + pt_down = !!(packet[2] & 2); + } + + /* + * XXX: Kludge. + * If it's been more than 30ms since the last packet, + * assume that there was a lift we were never told about. + */ + do_gettimeofday(&now_tv); + now_ns = timeval_to_ns (&now_tv); + if (now_ns >= priv->late) { + input_report_key(dev, BTN_TOUCH, 0); + input_report_key(dev, BTN_TOOL_PEN, 0); + input_report_key(dev2, BTN_TOUCH, 0); + input_report_key(dev2, BTN_TOOL_FINGER, 0); + + input_sync(dev); + input_sync(dev2); + } + + priv->late = now_ns + (30 * NSEC_PER_MSEC); + + + if (tpdebug) { + printk(KERN_DEBUG "%s %02x %02x %02x %02x %02x %02x\n", + __FUNCTION__, psmouse->packet[0], psmouse->packet[1], + psmouse->packet[2], psmouse->packet[3], psmouse->packet[4], + psmouse->packet[5]); + printk(KERN_DEBUG "l=%d r=%d p=%d g=%d x=%d y=%d z=%d\n", + left, right, pt_down, gs_down, x, y, z); + } + + if (psmouse->packet[0] == OLPC_PKT_PT) { + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_RIGHT, right); + } else if (psmouse->packet[0] == OLPC_PKT_GS) { + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_RIGHT, right); + input_report_key(dev2, BTN_LEFT, left); + input_report_key(dev2, BTN_RIGHT, right); + } + + input_report_key(dev, BTN_TOUCH, pt_down); + input_report_key(dev, BTN_TOOL_PEN, pt_down); + input_report_key(dev2, BTN_TOUCH, gs_down); + input_report_key(dev2, BTN_TOOL_FINGER, gs_down); + + input_report_abs(dev2, ABS_PRESSURE, z); + + if (psmouse->packet[0] == OLPC_PKT_PT && pt_down) { + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + } else if (psmouse->packet[0] == OLPC_PKT_GS && gs_down) { + input_report_abs(dev2, ABS_X, x); + input_report_abs(dev2, ABS_Y, y); + } + + input_sync(dev); + input_sync(dev2); + + if (priv->pending_mode == OLPC_GS && + psmouse->packet[0] == OLPC_PKT_PT && pt_down) { + priv->pending_mode = 0; + cancel_delayed_work(&priv->mode_switch); + } + + if (priv->i->flags & (OLPC_PT|OLPC_GS)) { + int pending = 0; + if (psmouse->packet[0] == OLPC_PKT_PT && !pt_down) + pending = OLPC_GS; + else if (psmouse->packet[0] == OLPC_PKT_GS && pt_down) + pending = OLPC_PT; + + if (priv->current_mode == pending) { + priv->pending_mode = 0; + pending = priv->current_mode; + } + else if (priv->pending_mode != pending) { + priv->pending_mode = pending; + if (tpdebug) + printk(KERN_WARNING "Scheduling mode switch to %s.\n", + pending == OLPC_GS ? "GS" : "PT"); + + /* + * Apply a de-bounce when switching from PT to GS, to allow for + * spurious PT-up packets. + */ + if (priv->pending_mode == OLPC_GS) + queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50)); + else + queue_delayed_work(kpsmoused_wq, &priv->mode_switch, 0); + } + } +} + +static psmouse_ret_t olpc_process_byte(struct psmouse *psmouse) +{ + psmouse_ret_t ret = PSMOUSE_BAD_DATA; + + if (psmouse->packet[0] != OLPC_PKT_PT && + psmouse->packet[0] != OLPC_PKT_GS) + goto out; + + /* Bytes 2 - 6 should have 0 in the highest bit */ + if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 && + (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) + goto out; + + if (psmouse->pktcnt == 6) { + olpc_process_packet_gspt(psmouse); + ret = PSMOUSE_FULL_PACKET; + goto out; + } + + ret = PSMOUSE_GOOD_DATA; +out: + if (ret != PSMOUSE_GOOD_DATA && ret != PSMOUSE_FULL_PACKET) + printk(KERN_DEBUG "%s: (%d) %02x %02x %02x %02x %02x %02x\n", + __FUNCTION__, psmouse->pktcnt, psmouse->packet[0], + psmouse->packet[1], psmouse->packet[2], + psmouse->packet[3], psmouse->packet[4], + psmouse->packet[5]); + return ret; +} + +static struct olpc_model_info *olpc_get_model(struct psmouse *psmouse) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[4]; + int i; + + /* + * Now try "E7 report". Allowed responses are in + * olpc_model_data[].signature + */ + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21)) + return NULL; + + param[0] = param[1] = param[2] = 0xff; + if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) + return NULL; + + pr_debug("olpc.c(%d): E7 report: %2.2x %2.2x %2.2x", + __LINE__, param[0], param[1], param[2]); + + for (i = 0; i < ARRAY_SIZE(olpc_model_data); i++) { + if (!memcmp(param, olpc_model_data[i].signature, + sizeof(olpc_model_data[i].signature))) { + printk(KERN_INFO __FILE__ ": OLPC touchpad revision 0x%x.\n", param[2]); + return olpc_model_data + i; + } + } + + /* + * ALPS creates new IDs pretty frequently; rather than listing them + * all, just assume they support the defaults. We've set aside the + * first entry of olpc_model_data as the catch-all. + */ + if (!memcmp(param, olpc_model_data[0].signature, 2)) { + printk(KERN_INFO __FILE__ ": unknown ALPS revision %x, assuming default flags.\n", param[2]); + return &olpc_model_data[0]; + } + + return NULL; +} + +static int olpc_find_mode(struct psmouse *psmouse) +{ + struct olpc_data *priv = psmouse->private; + int mode = priv->i->flags; + + if (mode & OLPC_GS) + mode = OLPC_GS; + else if (mode & OLPC_PT) + mode = OLPC_PT; + else + mode = -1; + + return mode; +} + +/* + * Touchpad should be disabled before calling this! + */ +static int olpc_new_mode(struct psmouse *psmouse, int mode) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + struct olpc_data *priv = psmouse->private; + unsigned char param; + int ret; + + if (tpdebug) + printk(KERN_WARNING __FILE__ ": Switching to %d. [%lu]\n", mode, jiffies); + + if ((ret = ps2_command(ps2dev, ¶m, 0x01F2))) + goto failed; + if ((ret = ps2_command(ps2dev, ¶m, 0x01F2))) + goto failed; + if ((ret = ps2_command(ps2dev, ¶m, 0x01F2))) + goto failed; + + switch (mode) { + default: + printk(KERN_WARNING __FILE__ ": Invalid mode %d. Defaulting to OLPC_GS.\n", mode); + case OLPC_GS: + ret = ps2_command(ps2dev, NULL, 0xE6); + break; + case OLPC_PT: + ret = ps2_command(ps2dev, NULL, 0xE7); + break; + } + if (ret) + goto failed; + + /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */ + psmouse->pktcnt = psmouse->out_of_sync = 0; + psmouse->last = jiffies; + psmouse->state = PSMOUSE_ACTIVATED; + + if ((ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE))) + goto failed; + + priv->current_mode = mode; + priv->pending_mode = 0; + if (tpdebug) + printk(KERN_WARNING __FILE__ ": Switched to mode %d successful.\n", mode); + +failed: + if (ret) + printk(KERN_WARNING __FILE__ ": Mode switch to %d failed! (%d) [%lu]\n", mode, ret, jiffies); + return ret; +} + +static int olpc_absolute_mode(struct psmouse *psmouse, int mode) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + + /* Switch to 'Advanced mode.', four disables in a row. */ + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE)) + return -1; + + return olpc_new_mode(psmouse, mode); +} + +/* + * olpc_poll() - poll the touchpad for current motion packet. + * Used in resync. + * Note: We can't poll, so always return failure. + */ +static int olpc_poll(struct psmouse *psmouse) +{ + return -1; +} + +static int olpc_reconnect(struct psmouse *psmouse) +{ + struct olpc_data *priv = psmouse->private; + int mode; + + if (olpc_rev_after(OLPC_REV_B2)) + if (psmouse->ps2dev.serio->dev.power.power_state.event != PM_EVENT_ON) + return 0; + + psmouse_reset(psmouse); + + if (!(priv->i = olpc_get_model(psmouse))) + return -1; + + mode = olpc_find_mode(psmouse); + if (mode < 0) + return -1; + + if (olpc_absolute_mode(psmouse, mode)) { + printk(KERN_ERR __FILE__ ": Failed to reenable absolute mode.\n"); + return -1; + } + + return 0; +} + +static void olpc_disconnect(struct psmouse *psmouse) +{ + struct olpc_data *priv = psmouse->private; + + psmouse_reset(psmouse); + input_unregister_device(priv->dev2); + kfree(priv); +} + +static void olpc_mode_switch(struct work_struct *w) +{ + struct delayed_work *work = container_of(w, struct delayed_work, work); + struct olpc_data *priv = container_of(work, struct olpc_data, mode_switch); + struct psmouse *psmouse = priv->psmouse; + struct ps2dev *ps2dev = &psmouse->ps2dev; + int pending_mode, ret; + + if (priv->pending_mode == priv->current_mode) { + priv->pending_mode = 0; + printk (KERN_DEBUG __FILE__ ": In switch_mode, no target mode.\n"); + return; + } + + if (tpdebug) + printk(KERN_WARNING __FILE__ ": Disable for switch to %d. [%lu]\n", priv->pending_mode, jiffies); + + /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */ + psmouse->state = PSMOUSE_INITIALIZING; + + ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); + if (ret) { + /* XXX: if this ever fails, we need to do a full reset! */ + printk(KERN_WARNING __FILE__ ": Disable failed for switch to %d. (%d) [%lu]\n", priv->pending_mode, ret, jiffies); + return; + } + + /* + * ALPS tells us that it may take up to 20msec for the disable to + * take effect; however, ps2_command() will wait up to 200msec for + * the ACK to come back (and I'm assuming that by the time the + * hardware sends back its ACK, it has stopped sending bytes). + */ + pending_mode = priv->pending_mode; + + if (olpc_new_mode(psmouse, priv->pending_mode)) + goto bad; + + /* + * Deal with a potential race condition. + * + * If there is a brief tap of a stylus or a fingernail that + * triggers a mode switch to PT mode, and the stylus/fingernail is + * lifted after the DISABLE above, but before we reenable in the new mode, + * then we can get stuck in PT mode. + */ + if (pending_mode == OLPC_PT) { + priv->pending_mode = OLPC_GS; + queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50)); + } + + return; + +bad: + printk(KERN_WARNING __FILE__ ": Failure to switch modes, resetting device...\n"); + olpc_reconnect(psmouse); +} + +int olpc_init(struct psmouse *psmouse) +{ + struct olpc_data *priv; + struct input_dev *dev = psmouse->dev; + struct input_dev *dev2; + int mode; + + priv = kzalloc(sizeof(struct olpc_data), GFP_KERNEL); + dev2 = input_allocate_device(); + if (!priv || !dev2) + goto init_fail; + + psmouse->private = priv; + priv->dev2 = dev2; + priv->psmouse = psmouse; + + psmouse_reset(psmouse); + if (!(priv->i = olpc_get_model(psmouse))) + goto init_fail; + + mode = olpc_find_mode(psmouse); + if (mode < 0) { + printk(KERN_ERR __FILE__ ": Failed to identify proper mode\n"); + goto init_fail; + } + + if (olpc_absolute_mode(psmouse, mode)) { + printk(KERN_ERR __FILE__ ": Failed to enable absolute mode\n"); + goto init_fail; + } + + /* + * Unset some of the default bits for things we don't have. + */ + dev->evbit[LONG(EV_REL)] &= ~BIT(EV_REL); + dev->relbit[LONG(REL_X)] &= ~(BIT(REL_X) | BIT(REL_Y)); + dev->keybit[LONG(BTN_MIDDLE)] &= ~BIT(BTN_MIDDLE); + + dev->evbit[LONG(EV_KEY)] |= BIT(EV_KEY); + dev->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); + dev->keybit[LONG(BTN_TOOL_PEN)] |= BIT(BTN_TOOL_PEN); + dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT); + + dev->evbit[LONG(EV_ABS)] |= BIT(EV_ABS); + input_set_abs_params(dev, ABS_X, 2, 1000, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, 717, 0, 0); + + snprintf(priv->phys, sizeof(priv->phys), + "%s/input1", psmouse->ps2dev.serio->phys); + dev2->phys = priv->phys; + dev2->name = "OLPC ALPS GlideSensor"; + dev2->id.bustype = BUS_I8042; + dev2->id.vendor = 0x0002; + dev2->id.product = PSMOUSE_OLPC; + dev2->id.version = 0x0000; + + dev2->evbit[LONG(EV_KEY)] |= BIT(EV_KEY); + dev2->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); + dev2->keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER); + dev2->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT); + + dev2->evbit[LONG(EV_ABS)] |= BIT(EV_ABS); + input_set_abs_params(dev2, ABS_X, 350, 512, 0, 0); + input_set_abs_params(dev2, ABS_Y, 70, 325, 0, 0); + input_set_abs_params(dev2, ABS_PRESSURE, 0, 63, 0, 0); + + if (input_register_device(dev2)) { + printk(KERN_ERR __FILE__ ": Failed to register GlideSensor\n"); + goto init_fail; + } + + psmouse->protocol_handler = olpc_process_byte; + psmouse->poll = olpc_poll; + psmouse->disconnect = olpc_disconnect; + psmouse->reconnect = olpc_reconnect; + psmouse->pktsize = 6; + + /* Disable the idle resync. */ + psmouse->resync_time = 0; + /* Reset after a lot of bad bytes. */ + psmouse->resetafter = 1024; + + INIT_DELAYED_WORK(&priv->mode_switch, olpc_mode_switch); + + return 0; + +init_fail: + input_free_device(dev2); + kfree(priv); + return -1; +} + +int olpc_detect(struct psmouse *psmouse, int set_properties) +{ + if (!olpc_get_model(psmouse)) + return -1; + + if (set_properties) { + psmouse->vendor = "ALPS"; + psmouse->name = "PenTablet"; + psmouse->model = 0; + } + return 0; +} + diff --git a/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.h b/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.h new file mode 100644 index 0000000000..426f8b4ea9 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/drivers/input/mouse/olpc.h @@ -0,0 +1,49 @@ +/* + * OLPC touchpad PS/2 mouse driver + * + * Copyright (c) 2006 One Laptop Per Child, inc. + * + * This driver is partly based on the ALPS driver. + * Copyright (c) 2003 Peter Osterlund + * Copyright (c) 2005 Vojtech Pavlik + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef _OLPC_H +#define _OLPC_H + +struct olpc_model_info { + unsigned char signature[3]; + unsigned char flags; +}; + +struct olpc_data { + struct input_dev *dev2; /* Relative device */ + struct psmouse *psmouse; + char name[32]; /* Name */ + char phys[32]; /* Phys */ + struct olpc_model_info *i; /* Info */ + int pending_mode; + int current_mode; + s64 late; + struct delayed_work mode_switch; +}; + +#ifdef CONFIG_MOUSE_PS2_OLPC +int olpc_detect(struct psmouse *psmouse, int set_properties); +int olpc_init(struct psmouse *psmouse); +#else +inline int olpc_detect(struct psmouse *psmouse, int set_properties) +{ + return -ENOSYS; +} +inline int olpc_init(struct psmouse *psmouse) +{ + return -ENOSYS; +} +#endif + +#endif diff --git a/target/linux/olpc/files-2.6.23/drivers/mtd/mtdcore.h b/target/linux/olpc/files-2.6.23/drivers/mtd/mtdcore.h new file mode 100644 index 0000000000..a33251f4b8 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/drivers/mtd/mtdcore.h @@ -0,0 +1,11 @@ +/* linux/drivers/mtd/mtdcore.h + * + * Header file for driver private mtdcore exports + * + */ + +/* These are exported solely for the purpose of mtd_blkdevs.c. You + should not use them for _anything_ else */ + +extern struct mutex mtd_table_mutex; +extern struct mtd_info *mtd_table[MAX_MTD_DEVICES]; diff --git a/target/linux/olpc/files-2.6.23/drivers/mtd/mtdoops.c b/target/linux/olpc/files-2.6.23/drivers/mtd/mtdoops.c new file mode 100644 index 0000000000..cfc28ab4a3 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/drivers/mtd/mtdoops.c @@ -0,0 +1,365 @@ +/* + * MTD Oops/Panic logger + * + * Copyright (C) 2007 Nokia Corporation. All rights reserved. + * + * Author: Richard Purdie + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define OOPS_PAGE_SIZE 4096 + +static struct mtdoops_context { + int mtd_index; + struct work_struct work; + struct mtd_info *mtd; + int oops_pages; + int nextpage; + int nextcount; + + void *oops_buf; + int ready; + int writecount; +} oops_cxt; + +static void mtdoops_erase_callback(struct erase_info *done) +{ + wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv; + wake_up(wait_q); +} + +static int mtdoops_erase_block(struct mtd_info *mtd, int offset) +{ + struct erase_info erase; + DECLARE_WAITQUEUE(wait, current); + wait_queue_head_t wait_q; + int ret; + + init_waitqueue_head(&wait_q); + erase.mtd = mtd; + erase.callback = mtdoops_erase_callback; + erase.addr = offset; + if (mtd->erasesize < OOPS_PAGE_SIZE) + erase.len = OOPS_PAGE_SIZE; + else + erase.len = mtd->erasesize; + erase.priv = (u_long)&wait_q; + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&wait_q, &wait); + + ret = mtd->erase(mtd, &erase); + if (ret) { + set_current_state(TASK_RUNNING); + remove_wait_queue(&wait_q, &wait); + printk (KERN_WARNING "mtdoops: erase of region [0x%x, 0x%x] " + "on \"%s\" failed\n", + erase.addr, erase.len, mtd->name); + return ret; + } + + schedule(); /* Wait for erase to finish. */ + remove_wait_queue(&wait_q, &wait); + + return 0; +} + +static int mtdoops_inc_counter(struct mtdoops_context *cxt) +{ + struct mtd_info *mtd = cxt->mtd; + size_t retlen; + u32 count; + int ret; + + cxt->nextpage++; + if (cxt->nextpage > cxt->oops_pages) + cxt->nextpage = 0; + cxt->nextcount++; + if (cxt->nextcount == 0xffffffff) + cxt->nextcount = 0; + + ret = mtd->read(mtd, cxt->nextpage * OOPS_PAGE_SIZE, 4, + &retlen, (u_char *) &count); + if ((retlen != 4) || (ret < 0)) { + printk(KERN_ERR "mtdoops: Read failure at %d (%d of 4 read)" + ", err %d.\n", cxt->nextpage * OOPS_PAGE_SIZE, + retlen, ret); + return 1; + } + + /* See if we need to erase the next block */ + if (count != 0xffffffff) + return 1; + + printk(KERN_DEBUG "mtdoops: Ready %d, %d (no erase)\n", + cxt->nextpage, cxt->nextcount); + cxt->ready = 1; + return 0; +} + +static void mtdoops_prepare(struct mtdoops_context *cxt) +{ + struct mtd_info *mtd = cxt->mtd; + int i = 0, j, ret, mod; + + /* We were unregistered */ + if (!mtd) + return; + + mod = (cxt->nextpage * OOPS_PAGE_SIZE) % mtd->erasesize; + if (mod != 0) { + cxt->nextpage = cxt->nextpage + ((mtd->erasesize - mod) / OOPS_PAGE_SIZE); + if (cxt->nextpage > cxt->oops_pages) + cxt->nextpage = 0; + } + + while (mtd->block_isbad && + mtd->block_isbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE)) { +badblock: + printk(KERN_WARNING "mtdoops: Bad block at %08x\n", + cxt->nextpage * OOPS_PAGE_SIZE); + i++; + cxt->nextpage = cxt->nextpage + (mtd->erasesize / OOPS_PAGE_SIZE); + if (cxt->nextpage > cxt->oops_pages) + cxt->nextpage = 0; + if (i == (cxt->oops_pages / (mtd->erasesize / OOPS_PAGE_SIZE))) { + printk(KERN_ERR "mtdoops: All blocks bad!\n"); + return; + } + } + + for (j = 0, ret = -1; (j < 3) && (ret < 0); j++) + ret = mtdoops_erase_block(mtd, cxt->nextpage * OOPS_PAGE_SIZE); + + if (ret < 0) { + if (mtd->block_markbad) + mtd->block_markbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE); + goto badblock; + } + + printk(KERN_DEBUG "mtdoops: Ready %d, %d \n", cxt->nextpage, cxt->nextcount); + + cxt->ready = 1; +} + +static void mtdoops_workfunc(struct work_struct *work) +{ + struct mtdoops_context *cxt = + container_of(work, struct mtdoops_context, work); + + mtdoops_prepare(cxt); +} + +static int find_next_position(struct mtdoops_context *cxt) +{ + struct mtd_info *mtd = cxt->mtd; + int page, maxpos = 0; + u32 count, maxcount = 0xffffffff; + size_t retlen; + + for (page = 0; page < cxt->oops_pages; page++) { + mtd->read(mtd, page * OOPS_PAGE_SIZE, 4, &retlen, (u_char *) &count); + if (count == 0xffffffff) + continue; + if (maxcount == 0xffffffff) { + maxcount = count; + maxpos = page; + } else if ((count < 0x40000000) && (maxcount > 0xc0000000)) { + maxcount = count; + maxpos = page; + } else if ((count > maxcount) && (count < 0xc0000000)) { + maxcount = count; + maxpos = page; + } else if ((count > maxcount) && (count > 0xc0000000) + && (maxcount > 0x80000000)) { + maxcount = count; + maxpos = page; + } + } + if (maxcount == 0xffffffff) { + cxt->nextpage = 0; + cxt->nextcount = 1; + cxt->ready = 1; + printk(KERN_DEBUG "mtdoops: Ready %d, %d (first init)\n", + cxt->nextpage, cxt->nextcount); + return 0; + } + + cxt->nextpage = maxpos; + cxt->nextcount = maxcount; + + return mtdoops_inc_counter(cxt); +} + + +static void mtdoops_notify_add(struct mtd_info *mtd) +{ + struct mtdoops_context *cxt = &oops_cxt; + int ret; + + if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0) + return; + + if (mtd->size < (mtd->erasesize * 2)) { + printk(KERN_ERR "MTD partition %d not big enough for mtdoops\n", + mtd->index); + return; + } + + cxt->mtd = mtd; + cxt->oops_pages = mtd->size / OOPS_PAGE_SIZE; + + ret = find_next_position(cxt); + if (ret == 1) + mtdoops_prepare(cxt); + + printk(KERN_DEBUG "mtdoops: Attached to MTD device %d\n", mtd->index); +} + +static void mtdoops_notify_remove(struct mtd_info *mtd) +{ + struct mtdoops_context *cxt = &oops_cxt; + + if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0) + return; + + cxt->mtd = NULL; + flush_scheduled_work(); +} + + +static void +mtdoops_console_write(struct console *co, const char *s, unsigned int count) +{ + struct mtdoops_context *cxt = co->data; + struct mtd_info *mtd = cxt->mtd; + int i, ret; + + if (!cxt->ready || !mtd) + return; + + if (!oops_in_progress && cxt->writecount != 0) { + size_t retlen; + if (cxt->writecount < OOPS_PAGE_SIZE) + memset(cxt->oops_buf + cxt->writecount, 0xff, + OOPS_PAGE_SIZE - cxt->writecount); + + ret = mtd->write(mtd, cxt->nextpage * OOPS_PAGE_SIZE, + OOPS_PAGE_SIZE, &retlen, cxt->oops_buf); + cxt->ready = 0; + cxt->writecount = 0; + + if ((retlen != OOPS_PAGE_SIZE) || (ret < 0)) + printk(KERN_ERR "mtdoops: Write failure at %d (%d of %d" + " written), err %d.\n", + cxt->nextpage * OOPS_PAGE_SIZE, retlen, + OOPS_PAGE_SIZE, ret); + + ret = mtdoops_inc_counter(cxt); + if (ret == 1) + schedule_work(&cxt->work); + } + + if (!oops_in_progress) + return; + + if (cxt->writecount == 0) { + u32 *stamp = cxt->oops_buf; + *stamp = cxt->nextcount; + cxt->writecount = 4; + } + + if ((count + cxt->writecount) > OOPS_PAGE_SIZE) + count = OOPS_PAGE_SIZE - cxt->writecount; + + for (i = 0; i < count; i++, s++) + *((char *)(cxt->oops_buf) + cxt->writecount + i) = *s; + + cxt->writecount = cxt->writecount + count; +} + +static int __init mtdoops_console_setup(struct console *co, char *options) +{ + struct mtdoops_context *cxt = co->data; + + if (cxt->mtd_index != -1) + return -EBUSY; + if (co->index == -1) + return -EINVAL; + + cxt->mtd_index = co->index; + return 0; +} + +static struct mtd_notifier mtdoops_notifier = { + .add = mtdoops_notify_add, + .remove = mtdoops_notify_remove, +}; + +static struct console mtdoops_console = { + .name = "ttyMTD", + .write = mtdoops_console_write, + .setup = mtdoops_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &oops_cxt, +}; + +static int __init mtdoops_console_init(void) +{ + struct mtdoops_context *cxt = &oops_cxt; + + cxt->mtd_index = -1; + cxt->oops_buf = vmalloc(OOPS_PAGE_SIZE); + + if (!cxt->oops_buf) { + printk(KERN_ERR "Failed to allocate oops buffer workspace\n"); + return -ENOMEM; + } + + INIT_WORK(&cxt->work, mtdoops_workfunc); + + register_console(&mtdoops_console); + register_mtd_user(&mtdoops_notifier); + return 0; +} + +static void __exit mtdoops_console_exit(void) +{ + struct mtdoops_context *cxt = &oops_cxt; + + unregister_mtd_user(&mtdoops_notifier); + unregister_console(&mtdoops_console); + vfree(cxt->oops_buf); +} + + +subsys_initcall(mtdoops_console_init); +module_exit(mtdoops_console_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Richard Purdie "); +MODULE_DESCRIPTION("MTD Oops/Panic console logger/driver"); diff --git a/target/linux/olpc/files-2.6.23/drivers/mtd/onenand/onenand_sim.c b/target/linux/olpc/files-2.6.23/drivers/mtd/onenand/onenand_sim.c new file mode 100644 index 0000000000..b80667309b --- /dev/null +++ b/target/linux/olpc/files-2.6.23/drivers/mtd/onenand/onenand_sim.c @@ -0,0 +1,495 @@ +/* + * linux/drivers/mtd/onenand/onenand_sim.c + * + * The OneNAND simulator + * + * Copyright © 2005-2007 Samsung Electronics + * Kyungmin Park + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#ifndef CONFIG_ONENAND_SIM_MANUFACTURER +#define CONFIG_ONENAND_SIM_MANUFACTURER 0xec +#endif +#ifndef CONFIG_ONENAND_SIM_DEVICE_ID +#define CONFIG_ONENAND_SIM_DEVICE_ID 0x04 +#endif +#ifndef CONFIG_ONENAND_SIM_VERSION_ID +#define CONFIG_ONENAND_SIM_VERSION_ID 0x1e +#endif + +static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER; +static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID; +static int version_id = CONFIG_ONENAND_SIM_VERSION_ID; + +struct onenand_flash { + void __iomem *base; + void __iomem *data; +}; + +#define ONENAND_CORE(flash) (flash->data) +#define ONENAND_CORE_SPARE(flash, this, offset) \ + ((flash->data) + (this->chipsize) + (offset >> 5)) + +#define ONENAND_MAIN_AREA(this, offset) \ + (this->base + ONENAND_DATARAM + offset) + +#define ONENAND_SPARE_AREA(this, offset) \ + (this->base + ONENAND_SPARERAM + offset) + +#define ONENAND_GET_WP_STATUS(this) \ + (readw(this->base + ONENAND_REG_WP_STATUS)) + +#define ONENAND_SET_WP_STATUS(v, this) \ + (writew(v, this->base + ONENAND_REG_WP_STATUS)) + +/* It has all 0xff chars */ +#define MAX_ONENAND_PAGESIZE (2048 + 64) +static unsigned char *ffchars; + +static struct mtd_partition os_partitions[] = { + { + .name = "OneNAND simulator partition", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +/* + * OneNAND simulator mtd + */ +struct onenand_info { + struct mtd_info mtd; + struct mtd_partition *parts; + struct onenand_chip onenand; + struct onenand_flash flash; +}; + +struct onenand_info *info; + +#define DPRINTK(format, args...) \ +do { \ + printk(KERN_DEBUG "%s[%d]: " format "\n", __func__, \ + __LINE__, ##args); \ +} while (0) + +/** + * onenand_lock_handle - Handle Lock scheme + * @param this OneNAND device structure + * @param cmd The command to be sent + * + * Send lock command to OneNAND device. + * The lock scheme is depends on chip type. + */ +static void onenand_lock_handle(struct onenand_chip *this, int cmd) +{ + int block_lock_scheme; + int status; + + status = ONENAND_GET_WP_STATUS(this); + block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK); + + switch (cmd) { + case ONENAND_CMD_UNLOCK: + if (block_lock_scheme) + ONENAND_SET_WP_STATUS(ONENAND_WP_US, this); + else + ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this); + break; + + case ONENAND_CMD_LOCK: + if (block_lock_scheme) + ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this); + else + ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this); + break; + + case ONENAND_CMD_LOCK_TIGHT: + if (block_lock_scheme) + ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this); + else + ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this); + break; + + default: + break; + } +} + +/** + * onenand_bootram_handle - Handle BootRAM area + * @param this OneNAND device structure + * @param cmd The command to be sent + * + * Emulate BootRAM area. It is possible to do basic operation using BootRAM. + */ +static void onenand_bootram_handle(struct onenand_chip *this, int cmd) +{ + switch (cmd) { + case ONENAND_CMD_READID: + writew(manuf_id, this->base); + writew(device_id, this->base + 2); + writew(version_id, this->base + 4); + break; + + default: + /* REVIST: Handle other commands */ + break; + } +} + +/** + * onenand_update_interrupt - Set interrupt register + * @param this OneNAND device structure + * @param cmd The command to be sent + * + * Update interrupt register. The status is depends on command. + */ +static void onenand_update_interrupt(struct onenand_chip *this, int cmd) +{ + int interrupt = ONENAND_INT_MASTER; + + switch (cmd) { + case ONENAND_CMD_READ: + case ONENAND_CMD_READOOB: + interrupt |= ONENAND_INT_READ; + break; + + case ONENAND_CMD_PROG: + case ONENAND_CMD_PROGOOB: + interrupt |= ONENAND_INT_WRITE; + break; + + case ONENAND_CMD_ERASE: + interrupt |= ONENAND_INT_ERASE; + break; + + case ONENAND_CMD_RESET: + interrupt |= ONENAND_INT_RESET; + break; + + default: + break; + } + + writew(interrupt, this->base + ONENAND_REG_INTERRUPT); +} + +/** + * onenand_check_overwrite - Check over-write if happend + * @param dest The destination pointer + * @param src The source pointer + * @param count The length to be check + * @return 0 on same, otherwise 1 + * + * Compare the source with destination + */ +static int onenand_check_overwrite(void *dest, void *src, size_t count) +{ + unsigned int *s = (unsigned int *) src; + unsigned int *d = (unsigned int *) dest; + int i; + + count >>= 2; + for (i = 0; i < count; i++) + if ((*s++ ^ *d++) != 0) + return 1; + + return 0; +} + +/** + * onenand_data_handle - Handle OneNAND Core and DataRAM + * @param this OneNAND device structure + * @param cmd The command to be sent + * @param dataram Which dataram used + * @param offset The offset to OneNAND Core + * + * Copy data from OneNAND Core to DataRAM (read) + * Copy data from DataRAM to OneNAND Core (write) + * Erase the OneNAND Core (erase) + */ +static void onenand_data_handle(struct onenand_chip *this, int cmd, + int dataram, unsigned int offset) +{ + struct mtd_info *mtd = &info->mtd; + struct onenand_flash *flash = this->priv; + int main_offset, spare_offset; + void __iomem *src; + void __iomem *dest; + unsigned int i; + + if (dataram) { + main_offset = mtd->writesize; + spare_offset = mtd->oobsize; + } else { + main_offset = 0; + spare_offset = 0; + } + + switch (cmd) { + case ONENAND_CMD_READ: + src = ONENAND_CORE(flash) + offset; + dest = ONENAND_MAIN_AREA(this, main_offset); + memcpy(dest, src, mtd->writesize); + /* Fall through */ + + case ONENAND_CMD_READOOB: + src = ONENAND_CORE_SPARE(flash, this, offset); + dest = ONENAND_SPARE_AREA(this, spare_offset); + memcpy(dest, src, mtd->oobsize); + break; + + case ONENAND_CMD_PROG: + src = ONENAND_MAIN_AREA(this, main_offset); + dest = ONENAND_CORE(flash) + offset; + /* To handle partial write */ + for (i = 0; i < (1 << mtd->subpage_sft); i++) { + int off = i * this->subpagesize; + if (!memcmp(src + off, ffchars, this->subpagesize)) + continue; + if (memcmp(dest + off, ffchars, this->subpagesize) && + onenand_check_overwrite(dest + off, src + off, this->subpagesize)) + printk(KERN_ERR "over-write happend at 0x%08x\n", offset); + memcpy(dest + off, src + off, this->subpagesize); + } + /* Fall through */ + + case ONENAND_CMD_PROGOOB: + src = ONENAND_SPARE_AREA(this, spare_offset); + /* Check all data is 0xff chars */ + if (!memcmp(src, ffchars, mtd->oobsize)) + break; + + dest = ONENAND_CORE_SPARE(flash, this, offset); + if (memcmp(dest, ffchars, mtd->oobsize) && + onenand_check_overwrite(dest, src, mtd->oobsize)) + printk(KERN_ERR "OOB: over-write happend at 0x%08x\n", + offset); + memcpy(dest, src, mtd->oobsize); + break; + + case ONENAND_CMD_ERASE: + memset(ONENAND_CORE(flash) + offset, 0xff, mtd->erasesize); + memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff, + (mtd->erasesize >> 5)); + break; + + default: + break; + } +} + +/** + * onenand_command_handle - Handle command + * @param this OneNAND device structure + * @param cmd The command to be sent + * + * Emulate OneNAND command. + */ +static void onenand_command_handle(struct onenand_chip *this, int cmd) +{ + unsigned long offset = 0; + int block = -1, page = -1, bufferram = -1; + int dataram = 0; + + switch (cmd) { + case ONENAND_CMD_UNLOCK: + case ONENAND_CMD_LOCK: + case ONENAND_CMD_LOCK_TIGHT: + case ONENAND_CMD_UNLOCK_ALL: + onenand_lock_handle(this, cmd); + break; + + case ONENAND_CMD_BUFFERRAM: + /* Do nothing */ + return; + + default: + block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1); + if (block & (1 << ONENAND_DDP_SHIFT)) { + block &= ~(1 << ONENAND_DDP_SHIFT); + /* The half of chip block */ + block += this->chipsize >> (this->erase_shift + 1); + } + if (cmd == ONENAND_CMD_ERASE) + break; + + page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8); + page = (page >> ONENAND_FPA_SHIFT); + bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER); + bufferram >>= ONENAND_BSA_SHIFT; + bufferram &= ONENAND_BSA_DATARAM1; + dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0; + break; + } + + if (block != -1) + offset += block << this->erase_shift; + + if (page != -1) + offset += page << this->page_shift; + + onenand_data_handle(this, cmd, dataram, offset); + + onenand_update_interrupt(this, cmd); +} + +/** + * onenand_writew - [OneNAND Interface] Emulate write operation + * @param value value to write + * @param addr address to write + * + * Write OneNAND register with value + */ +static void onenand_writew(unsigned short value, void __iomem * addr) +{ + struct onenand_chip *this = info->mtd.priv; + + /* BootRAM handling */ + if (addr < this->base + ONENAND_DATARAM) { + onenand_bootram_handle(this, value); + return; + } + /* Command handling */ + if (addr == this->base + ONENAND_REG_COMMAND) + onenand_command_handle(this, value); + + writew(value, addr); +} + +/** + * flash_init - Initialize OneNAND simulator + * @param flash OneNAND simulaotr data strucutres + * + * Initialize OneNAND simulator. + */ +static int __init flash_init(struct onenand_flash *flash) +{ + int density, size; + int buffer_size; + + flash->base = kzalloc(131072, GFP_KERNEL); + if (!flash->base) { + printk(KERN_ERR "Unable to allocate base address.\n"); + return -ENOMEM; + } + + density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT; + size = ((16 << 20) << density); + + ONENAND_CORE(flash) = vmalloc(size + (size >> 5)); + if (!ONENAND_CORE(flash)) { + printk(KERN_ERR "Unable to allocate nand core address.\n"); + kfree(flash->base); + return -ENOMEM; + } + + memset(ONENAND_CORE(flash), 0xff, size + (size >> 5)); + + /* Setup registers */ + writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID); + writew(device_id, flash->base + ONENAND_REG_DEVICE_ID); + writew(version_id, flash->base + ONENAND_REG_VERSION_ID); + + if (density < 2) + buffer_size = 0x0400; /* 1KiB page */ + else + buffer_size = 0x0800; /* 2KiB page */ + writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE); + + return 0; +} + +/** + * flash_exit - Clean up OneNAND simulator + * @param flash OneNAND simulaotr data strucutres + * + * Clean up OneNAND simulator. + */ +static void flash_exit(struct onenand_flash *flash) +{ + vfree(ONENAND_CORE(flash)); + kfree(flash->base); + kfree(flash); +} + +static int __init onenand_sim_init(void) +{ + /* Allocate all 0xff chars pointer */ + ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL); + if (!ffchars) { + printk(KERN_ERR "Unable to allocate ff chars.\n"); + return -ENOMEM; + } + memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE); + + /* Allocate OneNAND simulator mtd pointer */ + info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL); + if (!info) { + printk(KERN_ERR "Unable to allocate core structures.\n"); + kfree(ffchars); + return -ENOMEM; + } + + /* Override write_word function */ + info->onenand.write_word = onenand_writew; + + if (flash_init(&info->flash)) { + printk(KERN_ERR "Unable to allocat flash.\n"); + kfree(ffchars); + kfree(info); + return -ENOMEM; + } + + info->parts = os_partitions; + + info->onenand.base = info->flash.base; + info->onenand.priv = &info->flash; + + info->mtd.name = "OneNAND simulator"; + info->mtd.priv = &info->onenand; + info->mtd.owner = THIS_MODULE; + + if (onenand_scan(&info->mtd, 1)) { + flash_exit(&info->flash); + kfree(ffchars); + kfree(info); + return -ENXIO; + } + + add_mtd_partitions(&info->mtd, info->parts, ARRAY_SIZE(os_partitions)); + + return 0; +} + +static void __exit onenand_sim_exit(void) +{ + struct onenand_chip *this = info->mtd.priv; + struct onenand_flash *flash = this->priv; + + onenand_release(&info->mtd); + flash_exit(flash); + kfree(ffchars); + kfree(info); +} + +module_init(onenand_sim_init); +module_exit(onenand_sim_exit); + +MODULE_AUTHOR("Kyungmin Park "); +MODULE_DESCRIPTION("The OneNAND flash simulator"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/olpc/files-2.6.23/drivers/video/geode/geode_regs.h b/target/linux/olpc/files-2.6.23/drivers/video/geode/geode_regs.h new file mode 100644 index 0000000000..9e75505a88 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/drivers/video/geode/geode_regs.h @@ -0,0 +1,242 @@ +/* This header file defines the registers and suspend/resume + structures for the Geode GX and LX. The lxfb driver defines + _GEODELX_ before including this file, which will unlock the + extra registers that are only valid for LX. +*/ + +#ifndef _GEODE_REGS_H_ +#define _GEODE_REGS_H_ + +/* MSRs */ + +#define GX_VP_MSR_PAD_SELECT 0xC0002011 +#define LX_VP_MSR_PAD_SELECT 0x48000011 + +#define GEODE_MSR_GLCP_DOTPLL 0x4c000015 + +#define GLCP_DOTPLL_RESET (1 << 0) +#define GLCP_DOTPLL_BYPASS (1 << 15) +#define GLCP_DOTPLL_HALFPIX (1 << 24) +#define GLCP_DOTPLL_LOCK (1 << 25) + +/* Registers */ +#define VP_FP_START 0x400 + + +#ifdef _GEODELX_ + +#define GP_REG_SIZE 0x7C +#define DC_REG_SIZE 0xF0 +#define VP_REG_SIZE 0x158 +#define FP_REG_SIZE 0x70 + +#else + +#define GP_REG_SIZE 0x50 +#define DC_REG_SIZE 0x90 +#define VP_REG_SIZE 0x138 +#define FP_REG_SIZE 0x70 + +#endif + +#define DC_PAL_SIZE 0x105 + +struct geoderegs { + + struct { + u64 padsel; + u64 dotpll; + +#ifdef _GEODELX_ + u64 dfglcfg; + u64 dcspare; +#else + u64 rstpll; +#endif + } msr; + + union { + unsigned char b[GP_REG_SIZE]; + struct { + u32 dst_offset; /* 0x00 */ + u32 src_offset; /* 0x04 */ + u32 stride; /* 0x08 */ + u32 wid_height; /* 0x0C */ + u32 src_color_fg; /* 0x10 */ + u32 src_color_bg; /* 0x14 */ + u32 pat_color_0; /* 0x18 */ + u32 pat_color_1; /* 0x1C */ + u32 pat_color_2; /* 0x20 */ + u32 pat_color_3; /* 0x24 */ + u32 pat_color_4; /* 0x28 */ + u32 pat_color_5; /* 0x2C */ + u32 pat_data_0; /* 0x30 */ + u32 pat_data_1; /* 0x34 */ + u32 raster_mode; /* 0x38 */ + u32 vector_mode; /* 0x3C */ + u32 blt_mode; /* 0x40 */ + u32 blit_status; /* 0x4C */ + u32 hst_src; /* 0x48 */ + u32 base_offset; /* 0x4C */ + +#ifdef _GEODELX_ + u32 cmd_top; /* 0x50 */ + u32 cmd_bot; /* 0x54 */ + u32 cmd_read; /* 0x58 */ + u32 cmd_write; /* 0x5C */ + u32 ch3_offset; /* 0x60 */ + u32 ch3_mode_str; /* 0x64 */ + u32 ch3_width; /* 0x68 */ + u32 ch3_hsrc; /* 0x6C */ + u32 lut_index; /* 0x70 */ + u32 lut_data; /* 0x74 */ + u32 int_cntrl; /* 0x78 */ +#endif + } r; + } gp; + + union { + unsigned char b[DC_REG_SIZE]; + + struct { + u32 unlock; /* 0x00 */ + u32 gcfg; /* 0x04 */ + u32 dcfg; /* 0x08 */ + u32 arb; /* 0x0C */ + u32 fb_st_offset; /* 0x10 */ + u32 cb_st_offset; /* 0x14 */ + u32 curs_st_offset; /* 0x18 */ + u32 icon_st_offset; /* 0x1C */ + u32 vid_y_st_offset; /* 0x20 */ + u32 vid_u_st_offset; /* 0x24 */ + u32 vid_v_st_offset; /* 0x28 */ + u32 dctop; /* 0x2c */ + u32 line_size; /* 0x30 */ + u32 gfx_pitch; /* 0x34 */ + u32 vid_yuv_pitch; /* 0x38 */ + u32 rsvd2; /* 0x3C */ + u32 h_active_timing; /* 0x40 */ + u32 h_blank_timing; /* 0x44 */ + u32 h_sync_timing; /* 0x48 */ + u32 rsvd3; /* 0x4C */ + u32 v_active_timing; /* 0x50 */ + u32 v_blank_timing; /* 0x54 */ + u32 v_sync_timing; /* 0x58 */ + u32 fbactive; /* 0x5C */ + u32 dc_cursor_x; /* 0x60 */ + u32 dc_cursor_y; /* 0x64 */ + u32 dc_icon_x; /* 0x68 */ + u32 dc_line_cnt; /* 0x6C */ + u32 rsvd5; /* 0x70 - palette address */ + u32 rsvd6; /* 0x74 - palette data */ + u32 dfifo_diag; /* 0x78 */ + u32 cfifo_diag; /* 0x7C */ + u32 dc_vid_ds_delta; /* 0x80 */ + u32 gliu0_mem_offset; /* 0x84 */ + u32 dv_ctl; /* 0x88 - added by LX */ + u32 dv_acc; /* 0x8C */ + +#ifdef _GEODELX_ + u32 gfx_scale; + u32 irq_filt_ctl; + u32 filt_coeff1; + u32 filt_coeff2; + u32 vbi_event_ctl; + u32 vbi_odd_ctl; + u32 vbi_hor; + u32 vbi_ln_odd; + u32 vbi_ln_event; + u32 vbi_pitch; + u32 clr_key; + u32 clr_key_mask; + u32 clr_key_x; + u32 clr_key_y; + u32 irq; + u32 rsvd8; + u32 genlk_ctrl; + u32 vid_even_y_st_offset; /* 0xD8 */ + u32 vid_even_u_st_offset; /* 0xDC */ + u32 vid_even_v_st_offset; /* 0xE0 */ + u32 v_active_even_timing; /* 0xE4 */ + u32 v_blank_even_timing; /* 0xE8 */ + u32 v_sync_even_timing; /* 0xEC */ +#endif + } r; + } dc; + + union { + unsigned char b[VP_REG_SIZE]; + + struct { + u64 vcfg; /* 0x00 */ + u64 dcfg; /* 0x08 */ + u64 vx; /* 0x10 */ + u64 vy; /* 0x18 */ + u64 vs; /* 0x20 */ + u64 vck; /* 0x28 */ + u64 vcm; /* 0x30 */ + u64 rsvd1; /* 0x38 - Gamma address*/ + u64 rsvd2; /* 0x40 - Gamma data*/ + u64 rsvd3; /* 0x48 */ + u64 misc; /* 0x50 */ + u64 ccs; /* 0x58 */ + u64 rsvd4[3]; /* 0x60-0x70 */ + u64 vdc; /* 0x78 */ + u64 vco; /* 0x80 */ + u64 crc; /* 0x88 */ + u64 crc32; /* 0x90 */ + u64 vde; /* 0x98 */ + u64 cck; /* 0xA0 */ + u64 ccm; /* 0xA8 */ + u64 cc1; /* 0xB0 */ + u64 cc2; /* 0xB8 */ + u64 a1x; /* 0xC0 */ + u64 a1y; /* 0xC8 */ + u64 a1c; /* 0xD0 */ + u64 a1t; /* 0xD8 */ + u64 a2x; /* 0xE0 */ + u64 a2y; /* 0xE8 */ + u64 a2c; /* 0xF0 */ + u64 a2t; /* 0xF8 */ + u64 a3x; /* 0x100 */ + u64 a3y; /* 0x108 */ + u64 a3c; /* 0x110 */ + u64 a3t; /* 0x118 */ + u64 vrr; /* 0x120 */ + u64 awt; /* 0x128 */ + u64 vtm; /* 0x130 */ +#ifdef _GEODELX_ + u64 vye; /* 0x138 */ + u64 a1ye; /* 0x140 */ + u32 a2ye; /* 0x148 */ + u32 a3ye; /* 0x150 */ +#endif + } r; + } vp; + + union { + unsigned char b[FP_REG_SIZE]; + + struct { + u64 pt1; /* 0x400 */ + u64 pt2; /* 0x408 */ + u64 pm; /* 0x410 */ + u64 dfc; /* 0x418 */ + u64 blfsr; /* 0x420 */ + u64 rlfsr; /* 0x428 */ + u64 fmi; /* 0x430 */ + u64 fmd; /* 0x438 */ + u64 rsvd; /* 0x440 */ + u64 dca; /* 0x448 */ + u64 dmd; /* 0x450 */ + u64 crc; /* 0x458 */ + u64 fbb; /* 0x460 */ + u64 crc32; /* 0x468 */ + } r; + } fp; + + u32 pal[DC_PAL_SIZE]; + u32 gamma[256]; +}; + +#endif diff --git a/target/linux/olpc/files-2.6.23/drivers/video/geode/suspend_gx.c b/target/linux/olpc/files-2.6.23/drivers/video/geode/suspend_gx.c new file mode 100644 index 0000000000..43c25bea5a --- /dev/null +++ b/target/linux/olpc/files-2.6.23/drivers/video/geode/suspend_gx.c @@ -0,0 +1,272 @@ +#include +#include +#include + +#include "geodefb.h" +#include "video_gx.h" + +void gx_set_dotpll(struct fb_info *info, struct geoderegs *regs) +{ + int timeout = 1000; + + u64 rstpll, dotpll; + + rdmsrl(MSR_GLCP_SYS_RSTPLL, rstpll); + rdmsrl(MSR_GLCP_DOTPLL, dotpll); + + dotpll &= 0x00000000ffffffffull; + dotpll |= regs->msr.dotpll & 0xffffffff00000000ull; + + dotpll |= MSR_GLCP_DOTPLL_DOTRESET; + dotpll &= ~MSR_GLCP_DOTPLL_BYPASS; + + wrmsrl(MSR_GLCP_DOTPLL, dotpll); + + rstpll |= (regs->msr.rstpll & + ( MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 | + MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 | + MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3)); + + wrmsrl(MSR_GLCP_SYS_RSTPLL, rstpll); + dotpll &= ~(MSR_GLCP_DOTPLL_DOTRESET); + wrmsrl(MSR_GLCP_DOTPLL, dotpll); + + do { + rdmsrl(MSR_GLCP_DOTPLL, dotpll); + } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK)); +} + +/* FIXME: Make sure nothing is read to clear */ + +void gx_save_regs(struct fb_info *info, struct geoderegs *regs) +{ + struct geodefb_par *par = info->par; + int i; + + /* Wait for the BLT engine to stop being busy */ + while(readl(par->gp_regs + 0x44) & 0x05); + + rdmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel); + rdmsrl(MSR_GLCP_DOTPLL, regs->msr.dotpll); + rdmsrl(MSR_GLCP_SYS_RSTPLL, regs->msr.rstpll); + + writel(0x4758, par->dc_regs + 0x00); + + memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE); + memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE); + memcpy(regs->vp.b, par->vid_regs, VP_REG_SIZE); + memcpy(regs->fp.b, par->vid_regs + 0x400, FP_REG_SIZE); + + /* Save the palettes */ + writel(0, par->dc_regs + 0x70); + + for(i = 0; i < DC_PAL_SIZE; i++) + regs->pal[i] = readl(par->dc_regs + 0x74); + + writel(0, par->vid_regs + 0x38); + + for(i = 0; i < 0xFF; i++) + regs->gamma[i] = readl(par->vid_regs + 0x40); +} + +void gx_restore_regs(struct fb_info *info, struct geoderegs *regs) +{ + struct geodefb_par *par = info->par; + u32 val, i; + + /* DOTPLL */ + gx_set_dotpll(info, regs); + + /* GP */ + + writel(regs->gp.r.dst_offset, par->gp_regs + 0x00); + writel(regs->gp.r.src_offset, par->gp_regs + 0x04); + writel(regs->gp.r.stride, par->gp_regs + 0x08); + writel(regs->gp.r.wid_height, par->gp_regs + 0x0C); + writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10); + writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14); + writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18); + writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C); + writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20); + writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24); + writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28); + writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C); + writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30); + writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34); + + /* Don't write the raster / vector / blt mode regs */ + /* status register is read only */ + + writel(regs->gp.r.hst_src, par->gp_regs + 0x48); + writel(regs->gp.r.base_offset, par->gp_regs + 0x4c); + + /* DC */ + + /* Write the unlock value */ + writel(0x4758, par->dc_regs + 0x00); + + writel(0, par->dc_regs + 0x70); + + for(i = 0; i < DC_PAL_SIZE; i++) + writel(regs->pal[i], par->dc_regs + 0x74); + + /* Write the gcfg register without the enables */ + writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04); + + /* Write the vcfg register without the enables */ + writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08); + + /* Write the rest of the active registers */ + + writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10); + writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14); + writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18); + writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C); + writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20); + writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24); + writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28); + writel(regs->dc.r.line_size, par->dc_regs + 0x30); + writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34); + writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38); + writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40); + writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44); + writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48); + writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50); + writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54); + writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58); + writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60); + writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64); + writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68); + + /* Don't write the line_cnt or diag registers */ + + writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80); + writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84); + writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C); + + /* VP */ + + /* MSR */ + wrmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel); + + writel(0, par->vid_regs + 0x38); + + for(i = 0; i < 0xFF; i++) + writel((u32) regs->gamma[i], par->vid_regs + 0x40); + + /* Don't enable video yet */ + writel((u32) regs->vp.r.vcfg & ~0x01, par->vid_regs + 0x00); + + /* Don't enable the CRT yet */ + writel((u32) regs->vp.r.dcfg & ~0x0F, par->vid_regs + 0x08); + + /* Write the rest of the VP registers */ + + writel((u32) regs->vp.r.vx, par->vid_regs + 0x10); + writel((u32) regs->vp.r.vy, par->vid_regs + 0x18); + writel((u32) regs->vp.r.vs, par->vid_regs + 0x20); + writel((u32) regs->vp.r.vck, par->vid_regs + 0x28); + writel((u32) regs->vp.r.vcm, par->vid_regs + 0x30); + writel((u32) regs->vp.r.misc, par->vid_regs + 0x50); + writel((u32) regs->vp.r.ccs, par->vid_regs + 0x58); + writel((u32) regs->vp.r.vdc, par->vid_regs + 0x78); + writel((u32) regs->vp.r.vco, par->vid_regs + 0x80); + writel((u32) regs->vp.r.crc, par->vid_regs + 0x88); + writel((u32) regs->vp.r.vde, par->vid_regs + 0x98); + writel((u32) regs->vp.r.cck, par->vid_regs + 0xA0); + writel((u32) regs->vp.r.ccm, par->vid_regs + 0xA8); + writel((u32) regs->vp.r.cc1, par->vid_regs + 0xB0); + writel((u32) regs->vp.r.cc2, par->vid_regs + 0xB8); + writel((u32) regs->vp.r.a1x, par->vid_regs + 0xC0); + writel((u32) regs->vp.r.a1y, par->vid_regs + 0xC8); + writel((u32) regs->vp.r.a1c, par->vid_regs + 0xD0); + writel((u32) regs->vp.r.a1t, par->vid_regs + 0xD8); + writel((u32) regs->vp.r.a2x, par->vid_regs + 0xE0); + writel((u32) regs->vp.r.a2y, par->vid_regs + 0xE8); + writel((u32) regs->vp.r.a2c, par->vid_regs + 0xF0); + writel((u32) regs->vp.r.a2t, par->vid_regs + 0xF8); + writel((u32) regs->vp.r.a3x, par->vid_regs + 0x100); + writel((u32) regs->vp.r.a3y, par->vid_regs + 0x108); + writel((u32) regs->vp.r.a3c, par->vid_regs + 0x110); + writel((u32) regs->vp.r.a3t, par->vid_regs + 0x118); + writel((u32) regs->vp.r.vrr, par->vid_regs + 0x120); + + + /* FP registers */ + + writel((u32) regs->fp.r.pt1, par->vid_regs + 0x400); + writel((u32) regs->fp.r.pt2, par->vid_regs + 0x408); + + writel((u32) regs->fp.r.dfc, par->vid_regs + 0x418); + writel(regs->fp.r.blfsr, par->vid_regs + 0x420); + writel(regs->fp.r.rlfsr, par->vid_regs + 0x428); + writel(regs->fp.r.fmi, par->vid_regs + 0x430); + writel(regs->fp.r.fmd, par->vid_regs + 0x438); + writel(regs->fp.r.dca, par->vid_regs + 0x448); + writel(regs->fp.r.dmd, par->vid_regs + 0x450); + writel(regs->fp.r.crc, par->vid_regs + 0x458); + writel(regs->fp.r.fbb, par->vid_regs + 0x460); + + /* Final enables */ + + val = readl(par->vid_regs + 0x410); + + /* Control the panel */ + if (regs->fp.r.pm & (1 << 24)) { + + if (!(val & 0x09)) + writel(regs->fp.r.pm, par->vid_regs + 0x410); + } + else { + if (!(val & 0x05)) + writel(regs->fp.r.pm, par->vid_regs + 0x410); + } + + /* Turn everything on */ + + writel(regs->dc.r.gcfg, par->dc_regs + 0x04); + writel((u32) regs->vp.r.vcfg, par->vid_regs + 0x00); + writel((u32) regs->vp.r.dcfg, par->vid_regs + 0x08); + writel(regs->dc.r.dcfg, par->dc_regs + 0x08); +} + + +#ifdef DEBUG + +void dump_regs(struct fb_info *info, int mode) { + + struct geodefb_par *par = info->par; + u32 val; + int i; + + if (mode == 0) { + for(i = 0; i < GP_REG_SIZE; i += 4) { + val = readl(par->gp_regs + i); + } + } + + if (mode == 1) { + writel(0x4758, par->dc_regs + 0x00); + + for(i = 0; i < DC_REG_SIZE; i += 4) { + val = readl(par->dc_regs + i); + printk("DC%x: %x\n", i, val); + } + } + + if (mode == 2) { + for(i = 0; i < VP_REG_SIZE; i += 8) { + val = readl(par->vid_regs + i); + printk("VP%x: %x\n", i, val); + } + } + + if (mode == 3) { + for(i = 0; i < FP_REG_SIZE; i += 8) { + val = readl(par->vid_regs + 0x400 + i); + printk("FP%x: %x\n", i, val); + } + } +} + +#endif diff --git a/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.c b/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.c new file mode 100644 index 0000000000..d4ef138676 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.c @@ -0,0 +1,824 @@ +/* + * Mainly by David Woodhouse, somewhat modified by Jordan Crouse + * + * Copyright © 2006-2007 Red Hat, Inc. + * Copyright © 2006-2007 Advanced Micro Devices, Inc. + * + * This program is free software. You can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "olpc_dcon.h" + +/* Module definitions */ + +static int resumeline = 898; +module_param(resumeline, int, 0444); + +static int noinit; +module_param(noinit, int, 0444); + +/* Default off since it doesn't work on DCON ASIC in B-test OLPC board */ +static int useaa = 1; +module_param(useaa, int, 0444); + +/* I2C structures */ + +static struct i2c_driver dcon_driver; +static struct i2c_client *dcon_client; + +/* Platform devices */ +static struct platform_device *dcon_device; + +/* Backlight device */ +static struct backlight_device *dcon_bl_dev; + +/* Base address of the GPIO registers */ +static unsigned long gpio_base; + +static struct fb_info *fbinfo; + +/* Current source, initialized at probe time */ +static int dcon_source; + +/* Desired source */ +static int dcon_pending; + +/* Current output type */ +static int dcon_output = DCON_OUTPUT_COLOR; + +/* Current sleep status (not yet implemented) */ +static int dcon_sleep_val = DCON_ACTIVE; + +/* Shadow register for the DCON_REG_MODE register */ +static unsigned short dcon_disp_mode; + +/* Variables used during switches */ +static int dcon_switched; + +static DECLARE_WAIT_QUEUE_HEAD(dcon_wait_queue); + +static unsigned short normal_i2c[] = { 0x0D, I2C_CLIENT_END }; +I2C_CLIENT_INSMOD; + +#define dcon_write(reg,val) i2c_smbus_write_word_data(dcon_client,reg,val) +#define dcon_read(reg) i2c_smbus_read_word_data(dcon_client,reg) + +/* The current backlight value - this saves us some smbus traffic */ +static int bl_val = -1; + +/* ===== API functions - these are called by a variety of users ==== */ + +/* Backlight notes - turning off the backlight enable bit in the DCON + * doesn't save us any power over just pushing the BL to zero, so we + * don't use that bit in this code. + */ + +static int dcon_get_backlight(void) +{ + if (dcon_client == NULL) + return 0; + + if (bl_val == -1) + bl_val = dcon_read(DCON_REG_BRIGHT) & 0x0F; + + return bl_val; +} + +static void dcon_set_backlight(int level) +{ + if (dcon_client == NULL) + return; + + if (bl_val == (level & 0x0F)) + return; + + bl_val = level & 0x0F; + dcon_write(DCON_REG_BRIGHT, bl_val); + + /* Purposely turn off the backlight when we go to level 0 */ + + if (bl_val == 0) { + dcon_disp_mode &= ~MODE_BL_ENABLE; + dcon_write(DCON_REG_MODE, dcon_disp_mode); + } + else if (!(dcon_disp_mode & MODE_BL_ENABLE)) { + dcon_disp_mode |= MODE_BL_ENABLE; + dcon_write(DCON_REG_MODE, dcon_disp_mode); + } +} + +/* Set the output type to either color or mono */ + +static int dcon_set_output(int arg) +{ + if (dcon_output == arg) + return 0; + + dcon_output = arg; + + if (arg == DCON_OUTPUT_MONO) { + dcon_disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA); + dcon_disp_mode |= MODE_MONO_LUMA; + } + else { + dcon_disp_mode &= ~(MODE_MONO_LUMA); + dcon_disp_mode |= MODE_CSWIZZLE; + if (useaa) + dcon_disp_mode |= MODE_COL_AA; + } + + dcon_write(DCON_REG_MODE, dcon_disp_mode); + return 0; +} + +/* For now, this will be really stupid - we need to address how + * DCONLOAD works in a sleep and account for it accordingly + */ + +static void dcon_sleep(int state) +{ + /* Turn off the backlight and put the DCON to sleep */ + + if (state == dcon_sleep_val) + return; + + if (state == DCON_SLEEP) { + dcon_disp_mode &= ~MODE_BL_ENABLE; + dcon_disp_mode |= MODE_SLEEP; + } + else { + /* Only re-enable the backlight if the backlight value is set */ + + if (bl_val != 0) + dcon_disp_mode |= MODE_BL_ENABLE; + + dcon_disp_mode &= ~MODE_SLEEP; + } + + dcon_sleep_val = state; + dcon_write(DCON_REG_MODE, dcon_disp_mode); + + /* We should turn off some stuff in the framebuffer - but what? */ +} + +/* Set the source of the display (CPU or DCON) */ + +static void dcon_source_switch(struct work_struct *work) +{ + DECLARE_WAITQUEUE(wait, current); + int source = dcon_pending; + + if (dcon_source == source) + return; + + dcon_switched = 0; + + switch (source) { + case DCON_SOURCE_CPU: + + /* Enable the scanline interrupt bit */ + if (dcon_write(DCON_REG_MODE, dcon_disp_mode | MODE_SCAN_INT)) + printk(KERN_ERR "olpc-dcon: couldn't enable scanline interrupt!\n"); + else { + /* Wait up to one second for the scanline interrupt */ + wait_event_timeout(dcon_wait_queue, dcon_switched == 1, HZ); + } + + if (!dcon_switched) + printk(KERN_ERR "olpc-dcon: Timeout entering CPU mode; expect a screen glitch.\n"); + + /* + * Ideally we'd like to disable interrupts here so that the + * fb_powerup and DCON turn on happen at a known time value; + * however, we can't do that right now with fb_set_suspend + * messing with semaphores. + * + * For now, we just hope.. + */ + if (fb_powerup(fbinfo)) { + printk(KERN_ERR "olpc-dcon: Failed to enter CPU mode\n"); + dcon_pending = DCON_SOURCE_DCON; + return; + } + + /* And turn off the DCON */ + outl(1<<11, gpio_base + GPIOx_OUT_VAL); + + /* Turn off the scanline interrupt */ + if (dcon_write(DCON_REG_MODE, dcon_disp_mode)) + printk(KERN_ERR "olpc-dcon: couldn't disable scanline interrupt!\n"); + + printk(KERN_INFO "olpc-dcon: The CPU has control\n"); + break; + case DCON_SOURCE_DCON: + { + int t; + + add_wait_queue(&dcon_wait_queue, &wait); + set_current_state(TASK_UNINTERRUPTIBLE); + + /* Clear GPIO11 (DCONLOAD) - this implies that the DCON is in + control */ + + outl(1 << (11 + 16), gpio_base + GPIOx_OUT_VAL); + + t = schedule_timeout(HZ/2); + remove_wait_queue(&dcon_wait_queue, &wait); + set_current_state(TASK_RUNNING); + + if (!dcon_switched) + printk(KERN_ERR "olpc-dcon: Timeout entering DCON mode; expect a screen glitch.\n"); + + /* Turn off the graphics engine completely */ + fb_powerdown(fbinfo); + + printk(KERN_INFO "olpc-dcon: The DCON has control\n"); + break; + } + default: + BUG(); + } + + dcon_source = source; +} + +static DECLARE_WORK(dcon_work, dcon_source_switch); + +static int dcon_set_source(int arg) +{ + if (arg != DCON_SOURCE_CPU && arg != DCON_SOURCE_DCON) + return -EINVAL; + + if (dcon_pending == arg) + return 0; + + dcon_pending = arg; + if ((dcon_source != arg) && !work_pending(&dcon_work)) + schedule_work(&dcon_work); + + return 0; +} + +static int dcon_set_source_sync(int arg) +{ + int ret = dcon_set_source(arg); + if (!ret) + flush_scheduled_work(); + return ret; +} + +static int dconbl_set(struct backlight_device *dev) { + + int level = dev->props.brightness; + + if (dev->props.power != FB_BLANK_UNBLANK) + level = 0; + + dcon_set_backlight(level); + return 0; +} + +static int dconbl_get(struct backlight_device *dev) { + return dcon_get_backlight(); +} + +static ssize_t dcon_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%4.4X\n", dcon_disp_mode); +} + +static ssize_t dcon_sleep_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", dcon_sleep_val); +} + +static ssize_t /* __deprecated */ dcon_source_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n"); + return sprintf(buf, "%d\n", dcon_source); +} + +static ssize_t dcon_freeze_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", dcon_source == DCON_SOURCE_DCON ? 1 : 0); +} + +static ssize_t dcon_output_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", dcon_output); +} + +static ssize_t dcon_resumeline_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", resumeline); +} + +static int _strtoul(const char *buf, int len, unsigned int *val) +{ + + char *endp; + unsigned int output = simple_strtoul(buf, &endp, 0); + int size = endp - buf; + + if (*endp && isspace(*endp)) + size++; + + if (size != len) + return -EINVAL; + + *val = output; + return 0; +} + +static ssize_t dcon_output_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int output; + int rc = -EINVAL; + + if (_strtoul(buf, count, &output)) + return -EINVAL; + + if (output == DCON_OUTPUT_COLOR || output == DCON_OUTPUT_MONO) { + dcon_set_output(output); + rc = count; + } + + return rc; +} + +static ssize_t /* __deprecated */ dcon_source_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int output; + int rc = -EINVAL; + + printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n"); + if (_strtoul(buf, count, &output)) + return -EINVAL; + + dcon_set_source(output); + rc = count; + + return rc; +} + +static ssize_t dcon_freeze_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int output; + int rc = -EINVAL; + + if (_strtoul(buf, count, &output)) + return rc; + + dcon_set_source(output ? DCON_SOURCE_DCON : DCON_SOURCE_CPU); + rc = count; + + return rc; +} + +static ssize_t dcon_resumeline_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int rl; + int rc = -EINVAL; + + if (_strtoul(buf, count, &rl)) + return rc; + + resumeline = rl; + dcon_write(DCON_REG_SCAN_INT, resumeline); + rc = count; + + return rc; +} + +static ssize_t dcon_sleep_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int output; + + if (_strtoul(buf, count, &output)) + return -EINVAL; + + dcon_sleep(output ? DCON_SLEEP : DCON_ACTIVE); + return count; +} + +static struct device_attribute dcon_device_files[] = { + __ATTR(mode, 0444, dcon_mode_show, NULL), + __ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store), + __ATTR(source, 0644, dcon_source_show, dcon_source_store), + __ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store), + __ATTR(output, 0644, dcon_output_show, dcon_output_store), + __ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store), +}; + +static struct backlight_ops dcon_bl_ops = { + .get_brightness = dconbl_get, + .update_status = dconbl_set +}; + +/* List of GPIOs that we care about: + (in) GPIO12 -- DCONBLNK + (in) GPIO[56] -- DCONSTAT[01] + (out) GPIO11 -- DCONLOAD +*/ + +#define IN_GPIOS ((1<<5) | (1<<6) | (1<<7) | (1<<12)) +#define OUT_GPIOS (1<<11) + +static irqreturn_t dcon_interrupt(int, void *); + +static int dcon_request_irq(void) +{ + unsigned long lo, hi; + unsigned char lob; + + rdmsr(MSR_LBAR_GPIO, lo, hi); + + /* Check the mask and whether GPIO is enabled (sanity check) */ + if (hi != 0x0000f001) { + printk(KERN_ERR "GPIO not enabled -- cannot use DCON\n"); + return -ENODEV; + } + + /* Mask off the IO base address */ + gpio_base = lo & 0x0000ff00; + + /* Turn off the event enable for GPIO7 just to be safe */ + outl(1 << (16+7), gpio_base + GPIOx_EVNT_EN); + + /* Set the directions for the GPIO pins */ + outl(OUT_GPIOS | (IN_GPIOS << 16), gpio_base + GPIOx_OUT_EN); + outl(IN_GPIOS | (OUT_GPIOS << 16), gpio_base + GPIOx_IN_EN); + + /* Set up the interrupt mappings */ + + /* Set the IRQ to pair 2 */ + geode_gpio_event_irq(OLPC_GPIO_DCON_IRQ, 2); + + /* Enable group 2 to trigger the DCON interrupt */ + geode_gpio_set_irq(2, DCON_IRQ); + + /* Select edge level for interrupt (in PIC) */ + + lob = inb(0x4d0); + lob &= ~(1 << DCON_IRQ); + outb(lob, 0x4d0); + + /* Register the interupt handler */ + if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver)) + return -EIO; + + /* Clear INV_EN for GPIO7 (DCONIRQ) */ + outl((1<<(16+7)), gpio_base + GPIOx_INV_EN); + + /* Enable filter for GPIO12 (DCONBLANK) */ + outl(1<<(12), gpio_base + GPIOx_IN_FLTR_EN); + + /* Disable filter for GPIO7 */ + outl(1<<(16+7), gpio_base + GPIOx_IN_FLTR_EN); + + /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ + + outl(1<<(16+7), gpio_base + GPIOx_EVNTCNT_EN); + outl(1<<(16+12), gpio_base + GPIOx_EVNTCNT_EN); + + /* Add GPIO12 to the Filter Event Pair #7 */ + outb(12, gpio_base + GPIO_FE7_SEL); + + /* Turn off negative Edge Enable for GPIO12 */ + outl(1<<(16+12), gpio_base + GPIOx_NEGEDGE_EN); + + /* Enable negative Edge Enable for GPIO7 */ + outl(1<<7, gpio_base + GPIOx_NEGEDGE_EN); + + /* Zero the filter amount for Filter Event Pair #7 */ + outw(0, gpio_base + GPIO_FLT7_AMNT); + + /* Clear the negative edge status for GPIO7 and GPIO12 */ + outl((1<<7) | (1<<12), gpio_base+0x4c); + + /* FIXME: Clear the posiitive status as well, just to be sure */ + outl((1<<7) | (1<<12), gpio_base+0x48); + + /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ + outl((1<<(7))|(1<<12), gpio_base + GPIOx_EVNT_EN); + + /* Determine the current state by reading the GPIO bit */ + /* Earlier stages of the boot process have established the state */ + dcon_source = inl(gpio_base + GPIOx_OUT_VAL) & (1<<11) + ? DCON_SOURCE_CPU + : DCON_SOURCE_DCON; + dcon_pending = dcon_source; + + return 0; +} + +static int dcon_reboot_notify(struct notifier_block *nb, unsigned long foo, void *bar) +{ + if (dcon_client == NULL) + return 0; + + /* Turn off the DCON. Entirely. */ + dcon_write(DCON_REG_MODE, 0x39); + dcon_write(DCON_REG_MODE, 0x32); + return 0; +} + +static int dcon_conswitch_notify(struct notifier_block *nb, + unsigned long mode, void *dummy) +{ + if (mode == CONSOLE_EVENT_SWITCH_TEXT) + dcon_sleep(DCON_ACTIVE); + + return 0; +} + +static struct notifier_block dcon_nb = { + .notifier_call = dcon_reboot_notify, + .priority = -1, +}; + +static struct notifier_block dcon_console_nb = { + .notifier_call = dcon_conswitch_notify, + .priority = -1, +}; + +static int dcon_probe(struct i2c_adapter *adap, int addr, int kind) +{ + struct i2c_client *client; + uint16_t ver; + int rc, i; + + if (!olpc_has_dcon()) { + printk("olpc-dcon: No DCON is attached.\n"); + return -ENODEV; + } + + if (num_registered_fb >= 1) + fbinfo = registered_fb[0]; + + if (adap->id != I2C_HW_SMBUS_SCX200) { + printk(KERN_ERR "olpc-dcon: Invalid I2C bus (%d not %d)\n", + adap->id, I2C_HW_SMBUS_SCX200); + return -ENXIO; + } + + client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (client == NULL) + return -ENOMEM; + + strncpy(client->name, "OLPC-DCON", I2C_NAME_SIZE); + client->addr = addr; + client->adapter = adap; + client->driver = &dcon_driver; + + if ((rc = i2c_attach_client(client)) != 0) { + printk(KERN_ERR "olpc-dcon: Unable to attach the I2C client.\n"); + goto eclient; + } + + ver = i2c_smbus_read_word_data(client, DCON_REG_ID); + + if ((ver >> 8) != 0xDC) { + printk(KERN_ERR "olpc-dcon: DCON ID not 0xDCxx: 0x%04x instead.\n", ver); + rc = -ENXIO; + goto ei2c; + } + + if ((rc = dcon_request_irq())) { + printk(KERN_ERR "olpc-dcon: Unable to grab IRQ.\n"); + goto ei2c; + } + + if (ver < 0xdc02 && !noinit) { + /* Initialize the DCON registers */ + + /* Start with work-arounds for DCON ASIC */ + i2c_smbus_write_word_data(client, 0x4b, 0x00cc); + i2c_smbus_write_word_data(client, 0x4b, 0x00cc); + i2c_smbus_write_word_data(client, 0x4b, 0x00cc); + i2c_smbus_write_word_data(client, 0x0b, 0x007a); + i2c_smbus_write_word_data(client, 0x36, 0x025c); + i2c_smbus_write_word_data(client, 0x37, 0x025e); + + /* Initialise SDRAM */ + + i2c_smbus_write_word_data(client, 0x3b, 0x002b); + i2c_smbus_write_word_data(client, 0x41, 0x0101); + i2c_smbus_write_word_data(client, 0x42, 0x0101); + } + + /* Colour swizzle, AA, no passthrough, backlight */ + + dcon_disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE | MODE_CSWIZZLE; + if (useaa) + dcon_disp_mode |= MODE_COL_AA; + i2c_smbus_write_word_data(client, DCON_REG_MODE, dcon_disp_mode); + + + /* Set the scanline to interrupt on during resume */ + + i2c_smbus_write_word_data(client, DCON_REG_SCAN_INT, resumeline); + + /* Add the DCON device */ + + dcon_device = platform_device_alloc("dcon", -1); + + if (dcon_device == NULL) { + printk(KERN_ERR "dcon: Unable to create the DCON device\n"); + rc = -ENOMEM; + goto eirq; + } + + if ((rc = platform_device_add(dcon_device))) { + printk(KERN_ERR "dcon: Unable to add the DCON device\n"); + goto edev; + } + + for(i = 0; i < ARRAY_SIZE(dcon_device_files); i++) + device_create_file(&dcon_device->dev, &dcon_device_files[i]); + + /* Add the backlight device for the DCON */ + + dcon_client = client; + + dcon_bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev, + NULL, &dcon_bl_ops); + + if (IS_ERR(dcon_bl_dev)) { + printk(KERN_INFO "Could not register the backlight device for the DCON (%ld)\n", PTR_ERR(dcon_bl_dev)); + dcon_bl_dev = NULL; + } + else { + dcon_bl_dev->props.max_brightness = 15; + dcon_bl_dev->props.power = FB_BLANK_UNBLANK; + dcon_bl_dev->props.brightness = dcon_get_backlight(); + + backlight_update_status(dcon_bl_dev); + } + + register_reboot_notifier(&dcon_nb); + console_event_register(&dcon_console_nb); + + printk(KERN_INFO "olpc-dcon: Discovered DCON version %x\n", ver & 0xFF); + + return 0; + + edev: + platform_device_unregister(dcon_device); + dcon_device = NULL; + eirq: + free_irq(DCON_IRQ, &dcon_driver); + ei2c: + i2c_detach_client(client); + eclient: + kfree(client); + + return rc; +} + +static int dcon_attach(struct i2c_adapter *adap) +{ + int ret; + + ret = i2c_probe(adap, &addr_data, dcon_probe); + + if (dcon_client == NULL) + printk(KERN_ERR "olpc-dcon: No DCON found on SMBus\n"); + + return ret; +} + +static int dcon_detach(struct i2c_client *client) +{ + int rc; + dcon_client = NULL; + + unregister_reboot_notifier(&dcon_nb); + console_event_unregister(&dcon_console_nb); + + free_irq(DCON_IRQ, &dcon_driver); + + if ((rc = i2c_detach_client(client)) == 0) + kfree(i2c_get_clientdata(client)); + + if (dcon_bl_dev != NULL) + backlight_device_unregister(dcon_bl_dev); + + if (dcon_device != NULL) + platform_device_unregister(dcon_device); + cancel_work_sync(&dcon_work); + + return rc; +} + + +#ifdef CONFIG_PM +static int dcon_suspend(struct i2c_client *client, pm_message_t state) +{ + if (dcon_sleep_val != DCON_ACTIVE) + return 0; + + /* Set up the DCON to have the source */ + return dcon_set_source_sync(DCON_SOURCE_DCON); +} + +static int dcon_resume(struct i2c_client *client) +{ + int x; + if (dcon_sleep_val != DCON_ACTIVE) + return 0; + + /* HACK: ensure the bus is stable */ + do { + x = dcon_read(DCON_REG_ID); + } while (x < 0); + + return dcon_set_source(DCON_SOURCE_CPU); +} + +#endif + +static irqreturn_t dcon_interrupt(int irq, void *id) +{ + int status = inl(gpio_base + GPIOx_READ_BACK) >> 5; + + /* Clear the negative edge status for GPIO7 */ + outl(1 << 7, gpio_base + GPIOx_NEGEDGE_STS); + + switch (status & 3) { + case 3: + printk(KERN_DEBUG "olpc-dcon: DCONLOAD_MISSED interrupt\n"); + break; + case 2: /* switch to DCON mode */ + case 1: /* switch to CPU mode */ + dcon_switched = 1; + wake_up(&dcon_wait_queue); + break; + case 0: + printk(KERN_DEBUG "olpc-dcon: scanline interrupt w/CPU\n"); + } + + return IRQ_HANDLED; +} + +static struct i2c_driver dcon_driver = { + .driver = { + .name = "OLPC-DCON", + }, + .id = I2C_DRIVERID_DCON, + .attach_adapter = dcon_attach, + .detach_client = dcon_detach, +#ifdef CONFIG_PM + .suspend = dcon_suspend, + .resume = dcon_resume, +#endif +}; + + +static int __init olpc_dcon_init(void) +{ + i2c_add_driver(&dcon_driver); + return 0; +} + +static void __exit olpc_dcon_exit(void) +{ + i2c_del_driver(&dcon_driver); +} + +module_init(olpc_dcon_init); +module_exit(olpc_dcon_exit); + +MODULE_LICENSE("GPL"); diff --git a/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.h b/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.h new file mode 100644 index 0000000000..6453ca4ba0 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/drivers/video/olpc_dcon.h @@ -0,0 +1,75 @@ +#ifndef OLPC_DCON_H_ +#define OLPC_DCON_H_ + +/* DCON registers */ + +#define DCON_REG_ID 0 +#define DCON_REG_MODE 1 + +#define MODE_PASSTHRU (1<<0) +#define MODE_SLEEP (1<<1) +#define MODE_SLEEP_AUTO (1<<2) +#define MODE_BL_ENABLE (1<<3) +#define MODE_BLANK (1<<4) +#define MODE_CSWIZZLE (1<<5) +#define MODE_COL_AA (1<<6) +#define MODE_MONO_LUMA (1<<7) +#define MODE_SCAN_INT (1<<8) +#define MODE_CLOCKDIV (1<<9) +#define MODE_DEBUG (1<<14) +#define MODE_SELFTEST (1<<15) + +#define DCON_REG_HRES 2 +#define DCON_REG_HTOTAL 3 +#define DCON_REG_HSYNC_WIDTH 4 +#define DCON_REG_VRES 5 +#define DCON_REG_VTOTAL 6 +#define DCON_REG_VSYNC_WIDTH 7 +#define DCON_REG_TIMEOUT 8 +#define DCON_REG_SCAN_INT 9 +#define DCON_REG_BRIGHT 10 + +/* GPIO registers (CS5536) */ + +#define MSR_LBAR_GPIO 0x5140000C + +#define GPIOx_OUT_VAL 0x00 +#define GPIOx_OUT_EN 0x04 +#define GPIOx_IN_EN 0x20 +#define GPIOx_INV_EN 0x24 +#define GPIOx_IN_FLTR_EN 0x28 +#define GPIOx_EVNTCNT_EN 0x2C +#define GPIOx_READ_BACK 0x30 +#define GPIOx_EVNT_EN 0x38 +#define GPIOx_NEGEDGE_EN 0x44 +#define GPIOx_NEGEDGE_STS 0x4C +#define GPIO_FLT7_AMNT 0xD8 +#define GPIO_MAP_X 0xE0 +#define GPIO_MAP_Y 0xE4 +#define GPIO_FE7_SEL 0xF7 + + +/* Status values */ + +#define DCONSTAT_SCANINT 0 +#define DCONSTAT_SCANINT_DCON 1 +#define DCONSTAT_DISPLAYLOAD 2 +#define DCONSTAT_MISSED 3 + +/* Source values */ + +#define DCON_SOURCE_DCON 0 +#define DCON_SOURCE_CPU 1 + +/* Output values */ +#define DCON_OUTPUT_COLOR 0 +#define DCON_OUTPUT_MONO 1 + +/* Sleep values */ +#define DCON_ACTIVE 0 +#define DCON_SLEEP 1 + +/* Interrupt */ +#define DCON_IRQ 6 + +#endif diff --git a/target/linux/olpc/files-2.6.23/include/asm-i386/ofw.h b/target/linux/olpc/files-2.6.23/include/asm-i386/ofw.h new file mode 100644 index 0000000000..79b08b164f --- /dev/null +++ b/target/linux/olpc/files-2.6.23/include/asm-i386/ofw.h @@ -0,0 +1,16 @@ +/* + * Definitions for Open Firmware client interface on 32-bit system. + * OF Cell size is 4. Integer properties are encoded big endian, + * as with all OF implementations. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _OFW_H +#define _OFW_H + +extern int ofw(char *, int, int, ...); + +#endif diff --git a/target/linux/olpc/files-2.6.23/include/asm-i386/olpc.h b/target/linux/olpc/files-2.6.23/include/asm-i386/olpc.h new file mode 100644 index 0000000000..26bc1a8d3f --- /dev/null +++ b/target/linux/olpc/files-2.6.23/include/asm-i386/olpc.h @@ -0,0 +1,116 @@ +/* OLPC machine specific definitions */ + +#ifndef ASM_OLPC_H_ +#define ASM_OLPC_H_ + +#include + +struct olpc_platform_t { + int flags; + int boardrev; + int ecver; +}; + +#define OLPC_F_PRESENT 0x01 +#define OLPC_F_DCON 0x02 +#define OLPC_F_VSA 0x04 + +enum +{ + OLPC_REV_A = 0, + + OLPC_REV_PRE_B1, + OLPC_REV_B1, + OLPC_REV_PRE_B2, + OLPC_REV_B2, + OLPC_REV_PRE_B3, + OLPC_REV_B3, + OLPC_REV_B4, + OLPC_REV_C1, + OLPC_REV_R1, + OLPC_REV_UNKNOWN /* this should always come last */ +}; + +#ifndef CONFIG_OLPC + +static inline int machine_is_olpc(void) { return 0; } +static inline int olpc_has_dcon(void) { return 0; } +static inline int olpc_has_vsa(void) { return 0; } +static inline int olpc_get_rev(void) { return OLPC_REV_UNKNOWN; } + +#else + +extern struct olpc_platform_t olpc_platform_info; + +static inline int +machine_is_olpc(void) +{ + return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0; +} + +static inline int +olpc_has_dcon(void) +{ + return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0; +} + +static inline int +olpc_has_vsa(void) +{ + return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0; +} + +static inline int +olpc_get_rev(void) +{ + return olpc_platform_info.boardrev; +} + +static inline int +olpc_rev_after(int rev) +{ + return olpc_platform_info.boardrev > rev && + olpc_platform_info.boardrev != OLPC_REV_UNKNOWN; +} + +static inline int +olpc_rev_before(int rev) +{ + return olpc_platform_info.boardrev < rev || + olpc_platform_info.boardrev == OLPC_REV_UNKNOWN; +} + +#endif + +/* EC functions */ + +int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, + unsigned char *outbuf, size_t outlen); + +void olpc_register_battery_callback(void (*f)(unsigned long)); +void olpc_deregister_battery_callback(void); + +/* EC commands and responses */ + +/* SCI source values */ + +#define EC_SCI_SRC_EMPTY 0x00 +#define EC_SCI_SRC_GAME 0x01 +#define EC_SCI_SRC_BATTERY 0x02 +#define EC_SCI_SRC_BATSOC 0x04 +#define EC_SCI_SRC_BATERR 0x08 +#define EC_SCI_SRC_EBOOK 0x10 +#define EC_SCI_SRC_WLAN 0x20 +#define EC_SCI_SRC_ACPWR 0x40 + +/* GPIO assignments */ + +#define OLPC_GPIO_MIC_AC 1 +#define OLPC_GPIO_DCON_IRQ 7 +#define OLPC_GPIO_THRM_ALRM 10 +#define OLPC_GPIO_WORKAUX 24 +#define OLPC_GPIO_LID 26 +#define OLPC_GPIO_ECSCI 27 + +#endif + diff --git a/target/linux/olpc/files-2.6.23/include/asm-i386/prom.h b/target/linux/olpc/files-2.6.23/include/asm-i386/prom.h new file mode 100644 index 0000000000..59d3bddccf --- /dev/null +++ b/target/linux/olpc/files-2.6.23/include/asm-i386/prom.h @@ -0,0 +1,108 @@ +#ifndef _I386_PROM_H +#define _I386_PROM_H +#ifdef __KERNEL__ + + +/* + * Definitions for talking to the Open Firmware PROM on + * Power Macintosh computers. + * + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. + * Updates for SPARC64 by David S. Miller + * Updates for i386/OLPC by Andres Salomon + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + +typedef u32 phandle; +typedef u32 ihandle; + +struct property { + char *name; + int length; + void *value; + struct property *next; +}; + +struct device_node { + const char *name; + const char *type; + phandle node; +// phandle linux_phandle; + char *path_component_name; + char *full_name; + + struct property *properties; + struct property *deadprops; /* removed properties */ + struct device_node *parent; + struct device_node *child; + struct device_node *sibling; + struct device_node *next; /* next device of same type */ + struct device_node *allnext; /* next in list of all nodes */ + struct proc_dir_entry *pde; /* this node's proc directory */ + struct kref kref; + unsigned long _flags; + void *data; +}; + +/* flag descriptions */ +#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */ + +#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags) +#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags) + +#define OF_BAD_ADDR ((u64)-1) + +static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de) +{ + dn->pde = de; +} + +extern struct device_node *of_find_node_by_name(struct device_node *from, + const char *name); +#define for_each_node_by_name(dn, name) \ + for (dn = of_find_node_by_name(NULL, name); dn; \ + dn = of_find_node_by_name(dn, name)) +extern struct device_node *of_find_node_by_type(struct device_node *from, + const char *type); +#define for_each_node_by_type(dn, type) \ + for (dn = of_find_node_by_type(NULL, type); dn; \ + dn = of_find_node_by_type(dn, type)) +extern struct device_node *of_find_compatible_node(struct device_node *from, + const char *type, const char *compat); +extern struct device_node *of_find_node_by_path(const char *path); +extern struct device_node *of_find_node_by_phandle(phandle handle); +extern struct device_node *of_get_parent(const struct device_node *node); +extern struct device_node *of_get_next_child(const struct device_node *node, + struct device_node *prev); +extern struct property *of_find_property(const struct device_node *np, + const char *name, + int *lenp); +//extern struct device_node *of_node_get(struct device_node *node); +//extern void of_node_put(struct device_node *node); +extern int of_device_is_compatible(const struct device_node *device, + const char *); +extern const void *of_get_property(const struct device_node *node, + const char *name, + int *lenp); +#define get_property(node,name,lenp) of_get_property(node,name,lenp) +extern int of_set_property(struct device_node *node, const char *name, void *val, int len); +extern int of_getintprop_default(struct device_node *np, + const char *name, + int def); +extern int of_n_addr_cells(struct device_node *np); +extern int of_n_size_cells(struct device_node *np); + +extern void prom_build_devicetree(void); + +#endif /* __KERNEL__ */ +#endif diff --git a/target/linux/olpc/files-2.6.23/include/linux/battery.h b/target/linux/olpc/files-2.6.23/include/linux/battery.h new file mode 100644 index 0000000000..2f856a0d75 --- /dev/null +++ b/target/linux/olpc/files-2.6.23/include/linux/battery.h @@ -0,0 +1,101 @@ +/* + * Driver model for batteries + * + * © 2006 David Woodhouse + * + * Based on LED Class support, by John Lenz and Richard Purdie: + * + * © 2005 John Lenz + * © 2005-2006 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __LINUX_BATTERY_H__ +#define __LINUX_BATTERY_H__ + +struct device; +struct class_device; + +/* + * Battery Core + */ +#define PWRDEV_TYPE_BATTERY 0 +#define PWRDEV_TYPE_AC 1 + +#define BAT_STAT_PRESENT (1<<0) +#define BAT_STAT_LOW (1<<1) +#define BAT_STAT_FULL (1<<2) +#define BAT_STAT_CHARGING (1<<3) +#define BAT_STAT_DISCHARGING (1<<4) +#define BAT_STAT_OVERTEMP (1<<5) +#define BAT_STAT_CRITICAL (1<<6) +#define BAT_STAT_FIRE (1<<7) +#define BAT_STAT_CHARGE_DONE (1<<8) + +/* Thou shalt not export any attributes in sysfs except these, and + with these units: */ +#define BAT_INFO_STATUS "status" /* Not free-form. Use + provided function */ +#define BAT_INFO_TEMP1 "temp1" /* °C/1000 */ +#define BAT_INFO_TEMP1_NAME "temp1_name" /* string */ + +#define BAT_INFO_TEMP2 "temp2" /* °C/1000 */ +#define BAT_INFO_TEMP2_NAME "temp2_name" /* string */ + +#define BAT_INFO_VOLTAGE "voltage" /* mV */ +#define BAT_INFO_VOLTAGE_DESIGN "voltage_design" /* mV */ + +#define BAT_INFO_CURRENT "current" /* mA */ +#define BAT_INFO_CURRENT_NOW "current_now" /* mA */ + +#define BAT_INFO_POWER "power" /* mW */ +#define BAT_INFO_POWER_NOW "power_now" /* mW */ + +/* The following capacity/charge properties are represented in either + mA or mW. The CAP_UNITS property MUST be provided if any of these are. */ +#define BAT_INFO_RATE "rate" /* CAP_UNITS */ +#define BAT_INFO_CAP_LEFT "capacity_left" /* CAP_UNITS*h */ +#define BAT_INFO_CAP_DESIGN "capacity_design" /* CAP_UNITS*h */ +#define BAT_INFO_CAP_LAST_FULL "capacity_last_full" /* CAP_UNITS*h */ +#define BAT_INFO_CAP_LOW "capacity_low_thresh" /* CAP_UNITS*h */ +#define BAT_INFO_CAP_WARN "capacity_warn_thresh" /* CAP_UNITS*h */ +#define BAT_INFO_CAP_UNITS "capacity_units" /* string: must be + either mA or mW */ + +#define BAT_INFO_CAP_PCT "capacity_percentage" /* integer */ + +#define BAT_INFO_TIME_EMPTY "time_to_empty" /* seconds */ +#define BAT_INFO_TIME_EMPTY_NOW "time_to_empty_now" /* seconds */ +#define BAT_INFO_TIME_FULL "time_to_full" /* seconds */ +#define BAT_INFO_TIME_FULL_NOW "time_to_full_now" /* seconds */ + +#define BAT_INFO_MANUFACTURER "manufacturer" /* string */ +#define BAT_INFO_TECHNOLOGY "technology" /* string */ +#define BAT_INFO_MODEL "model" /* string */ +#define BAT_INFO_SERIAL "serial" /* string */ +#define BAT_INFO_OEM_INFO "oem_info" /* string */ + +#define BAT_INFO_CYCLE_COUNT "cycle_count" /* integer */ +#define BAT_INFO_DATE_MFR "date_manufactured" /* YYYY[-MM[-DD]] */ +#define BAT_INFO_DATE_FIRST_USE "date_first_use" /* YYYY[-MM[-DD]] */ + +struct battery_dev { + int status_cap; + int id; + int type; + const char *name; + + struct device *dev; +}; + +int battery_device_register(struct device *parent, + struct battery_dev *battery_cdev); +void battery_device_unregister(struct battery_dev *battery_cdev); + + +ssize_t battery_attribute_show_status(char *buf, unsigned long status); +ssize_t battery_attribute_show_ac_status(char *buf, unsigned long status); +#endif /* __LINUX_BATTERY_H__ */ diff --git a/target/linux/olpc/files-2.6.23/sound/pci/cs5535audio/cs5535audio_olpc.c b/target/linux/olpc/files-2.6.23/sound/pci/cs5535audio/cs5535audio_olpc.c new file mode 100644 index 0000000000..791be73bfb --- /dev/null +++ b/target/linux/olpc/files-2.6.23/sound/pci/cs5535audio/cs5535audio_olpc.c @@ -0,0 +1,110 @@ +#include +#include +#include +#include +#include + +#include +#include "cs5535audio.h" + +/* + * OLPC has an additional feature on top of the regular AD1888 codec features. + * It has an Analog Input mode that is switched into (after disabling the + * High Pass Filter) via GPIO. It is only supported on B2 and later models. + */ + +int olpc_ai_enable(struct snd_ac97 *ac97, u8 val) +{ + int err; + + /* + * update the High Pass Filter (via AC97_AD_TEST2), and then set + * Analog Input mode through a GPIO. + */ + + if (val) { + err = snd_ac97_update_bits(ac97, AC97_AD_TEST2, + 1<type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +static int snd_cs5535audio_ai_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC, + GPIO_OUTPUT_VAL); + return 0; +} + +static int snd_cs5535audio_ai_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol); + struct snd_ac97 *ac97 = cs5535au->ac97; + + olpc_ai_enable(ac97, ucontrol->value.integer.value[0]); + + return 1; +} + +static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata = +{ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "DC Mode Enable", + .info = snd_cs5535audio_ai_info, + .get = snd_cs5535audio_ai_get, + .put = snd_cs5535audio_ai_put, + .private_value = 0 +}; + +void __devinit olpc_prequirks(struct snd_card *card, + struct snd_ac97_template *ac97) +{ + /* Bail if this isn't an OLPC platform */ + if (!machine_is_olpc()) + return; + + /* If on an OLPC B3 or higher, invert EAPD. */ + if (olpc_rev_after(OLPC_REV_B2)) + ac97->scaps |= AC97_SCAP_INV_EAPD; +} + +int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) +{ + struct snd_ctl_elem_id elem; + + /* Bail if this isn't an OLPC platform */ + if (!machine_is_olpc()) + return 0; + + /* drop the original ad1888 HPF control */ + memset(&elem, 0, sizeof(elem)); + elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER; + strcpy(elem.name, "High Pass Filter Enable"); + snd_ctl_remove_id(card, &elem); + + /* add the override for OLPC's HPF */ + return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls, + ac97->private_data)); +} diff --git a/target/linux/olpc/files/arch/i386/boot/setup.S b/target/linux/olpc/files/arch/i386/boot/setup.S deleted file mode 100644 index 4cf6e231c5..0000000000 --- a/target/linux/olpc/files/arch/i386/boot/setup.S +++ /dev/null @@ -1,1080 +0,0 @@ -/* - * setup.S Copyright (C) 1991, 1992 Linus Torvalds - * - * setup.s is responsible for getting the system data from the BIOS, - * and putting them into the appropriate places in system memory. - * both setup.s and system has been loaded by the bootblock. - * - * This code asks the bios for memory/disk/other parameters, and - * puts them in a "safe" place: 0x90000-0x901FF, ie where the - * boot-block used to be. It is then up to the protected mode - * system to read them from there before the area is overwritten - * for buffer-blocks. - * - * Move PS/2 aux init code to psaux.c - * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92 - * - * some changes and additional features by Christoph Niemann, - * March 1993/June 1994 (Christoph.Niemann@linux.org) - * - * add APM BIOS checking by Stephen Rothwell, May 1994 - * (sfr@canb.auug.org.au) - * - * High load stuff, initrd support and position independency - * by Hans Lermen & Werner Almesberger, February 1996 - * , - * - * Video handling moved to video.S by Martin Mares, March 1996 - * - * - * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david - * parsons) to avoid loadlin confusion, July 1997 - * - * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999. - * - * - * Fix to work around buggy BIOSes which don't use carry bit correctly - * and/or report extended memory in CX/DX for e801h memory size detection - * call. As a result the kernel got wrong figures. The int15/e801h docs - * from Ralf Brown interrupt list seem to indicate AX/BX should be used - * anyway. So to avoid breaking many machines (presumably there was a reason - * to orginally use CX/DX instead of AX/BX), we do a kludge to see - * if CX/DX have been changed in the e801 call and if so use AX/BX . - * Michael Miller, April 2001 - * - * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes - * by Robert Schwebel, December 2001 - */ - -#include -#include -#include -#include -#include -#include -#include - -/* Signature words to ensure LILO loaded us right */ -#define SIG1 0xAA55 -#define SIG2 0x5A5A - -INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way -SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536). -SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment - # ... and the former contents of CS - -DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020 - -.code16 -.globl begtext, begdata, begbss, endtext, enddata, endbss - -.text -begtext: -.data -begdata: -.bss -begbss: -.text - -start: - jmp trampoline - -# This is the setup header, and it must start at %cs:2 (old 0x9020:2) - - .ascii "HdrS" # header signature - .word 0x0206 # header version number (>= 0x0105) - # or else old loadlin-1.5 will fail) -realmode_swtch: .word 0, 0 # default_switch, SETUPSEG -start_sys_seg: .word SYSSEG - .word kernel_version # pointing to kernel version string - # above section of header is compatible - # with loadlin-1.5 (header v1.5). Don't - # change it. - -type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin, - # Bootlin, SYSLX, bootsect...) - # See Documentation/i386/boot.txt for - # assigned ids - -# flags, unused bits must be zero (RFU) bit within loadflags -loadflags: -LOADED_HIGH = 1 # If set, the kernel is loaded high -CAN_USE_HEAP = 0x80 # If set, the loader also has set - # heap_end_ptr to tell how much - # space behind setup.S can be used for - # heap purposes. - # Only the loader knows what is free -#ifndef __BIG_KERNEL__ - .byte 0 -#else - .byte LOADED_HIGH -#endif - -setup_move_size: .word 0x8000 # size to move, when setup is not - # loaded at 0x90000. We will move setup - # to 0x90000 then just before jumping - # into the kernel. However, only the - # loader knows how much data behind - # us also needs to be loaded. - -code32_start: # here loaders can put a different - # start address for 32-bit code. -#ifndef __BIG_KERNEL__ - .long 0x1000 # 0x1000 = default for zImage -#else - .long 0x100000 # 0x100000 = default for big kernel -#endif - -ramdisk_image: .long 0 # address of loaded ramdisk image - # Here the loader puts the 32-bit - # address where it loaded the image. - # This only will be read by the kernel. - -ramdisk_size: .long 0 # its size in bytes - -bootsect_kludge: - .long 0 # obsolete - -heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later) - # space from here (exclusive) down to - # end of setup code can be used by setup - # for local heap purposes. - -pad1: .word 0 -cmd_line_ptr: .long 0 # (Header version 0x0202 or later) - # If nonzero, a 32-bit pointer - # to the kernel command line. - # The command line should be - # located between the start of - # setup and the end of low - # memory (0xa0000), or it may - # get overwritten before it - # gets read. If this field is - # used, there is no longer - # anything magical about the - # 0x90000 segment; the setup - # can be located anywhere in - # low memory 0x10000 or higher. - -ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff - # (Header version 0x0203 or later) - # The highest safe address for - # the contents of an initrd - -kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment - #required for protected mode - #kernel -#ifdef CONFIG_RELOCATABLE -relocatable_kernel: .byte 1 -#else -relocatable_kernel: .byte 0 -#endif -pad2: .byte 0 -pad3: .word 0 - -cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, - #added with boot protocol - #version 2.06 - -trampoline: call start_of_setup - .align 16 - # The offset at this point is 0x240 - .space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff) -# End of setup header ##################################################### - -start_of_setup: -# Bootlin depends on this being done early - movw $0x01500, %ax - movb $0x81, %dl - int $0x13 - -#ifdef SAFE_RESET_DISK_CONTROLLER -# Reset the disk controller. - movw $0x0000, %ax - movb $0x80, %dl - int $0x13 -#endif - -# Set %ds = %cs, we know that SETUPSEG = %cs at this point - movw %cs, %ax # aka SETUPSEG - movw %ax, %ds -# Check signature at end of setup - cmpw $SIG1, setup_sig1 - jne bad_sig - - cmpw $SIG2, setup_sig2 - jne bad_sig - - jmp good_sig1 - -# Routine to print asciiz string at ds:si -prtstr: - lodsb - andb %al, %al - jz fin - - call prtchr - jmp prtstr - -fin: ret - -# Space printing -prtsp2: call prtspc # Print double space -prtspc: movb $0x20, %al # Print single space (note: fall-thru) - -# Part of above routine, this one just prints ascii al -prtchr: pushw %ax - pushw %cx - movw $7,%bx - movw $0x01, %cx - movb $0x0e, %ah - int $0x10 - popw %cx - popw %ax - ret - -beep: movb $0x07, %al - jmp prtchr - -no_sig_mess: .string "No setup signature found ..." - -good_sig1: - jmp good_sig - -# We now have to find the rest of the setup code/data -bad_sig: - movw %cs, %ax # SETUPSEG - subw $DELTA_INITSEG, %ax # INITSEG - movw %ax, %ds - xorb %bh, %bh - movb (497), %bl # get setup sect from bootsect - subw $4, %bx # LILO loads 4 sectors of setup - shlw $8, %bx # convert to words (1sect=2^8 words) - movw %bx, %cx - shrw $3, %bx # convert to segment - addw $SYSSEG, %bx - movw %bx, %cs:start_sys_seg -# Move rest of setup code/data to here - movw $2048, %di # four sectors loaded by LILO - subw %si, %si - pushw %cs - popw %es - movw $SYSSEG, %ax - movw %ax, %ds - rep - movsw - movw %cs, %ax # aka SETUPSEG - movw %ax, %ds - cmpw $SIG1, setup_sig1 - jne no_sig - - cmpw $SIG2, setup_sig2 - jne no_sig - - jmp good_sig - -no_sig: - lea no_sig_mess, %si - call prtstr - -no_sig_loop: - hlt - jmp no_sig_loop - -good_sig: - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ax, %ds -# Check if an old loader tries to load a big-kernel - testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel? - jz loader_ok # No, no danger for old loaders. - - cmpb $0, %cs:type_of_loader # Do we have a loader that - # can deal with us? - jnz loader_ok # Yes, continue. - - pushw %cs # No, we have an old loader, - popw %ds # die. - lea loader_panic_mess, %si - call prtstr - - jmp no_sig_loop - -loader_panic_mess: .string "Wrong loader, giving up..." - -# check minimum cpuid -# we do this here because it is the last place we can actually -# show a user visible error message. Later the video modus -# might be already messed up. -loader_ok: - call verify_cpu - testl %eax,%eax - jz cpu_ok - movw %cs,%ax # aka SETUPSEG - movw %ax,%ds - lea cpu_panic_mess,%si - call prtstr -1: jmp 1b - -cpu_panic_mess: - .asciz "PANIC: CPU too old for this kernel." - -#include "../kernel/verify_cpu.S" - -cpu_ok: -# Get memory size (extended mem, kB) - - xorl %eax, %eax - movl %eax, (0x1e0) -#ifndef STANDARD_MEMORY_BIOS_CALL - movb %al, (E820NR) -# Try three different memory detection schemes. First, try -# e820h, which lets us assemble a memory map, then try e801h, -# which returns a 32-bit memory size, and finally 88h, which -# returns 0-64m - -# method E820H: -# the memory map from hell. e820h returns memory classified into -# a whole bunch of different types, and allows memory holes and -# everything. We scan through this memory map and build a list -# of the first 32 memory areas, which we return at [E820MAP]. -# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification. - -#define SMAP 0x534d4150 - -meme820: - xorl %ebx, %ebx # continuation counter - movw $E820MAP, %di # point into the whitelist - # so we can have the bios - # directly write into it. - -jmpe820: - movl $0x0000e820, %eax # e820, upper word zeroed - movl $SMAP, %edx # ascii 'SMAP' - movl $20, %ecx # size of the e820rec - pushw %ds # data record. - popw %es - int $0x15 # make the call - jc bail820 # fall to e801 if it fails - - cmpl $SMAP, %eax # check the return is `SMAP' - jne bail820 # fall to e801 if it fails - -# cmpl $1, 16(%di) # is this usable memory? -# jne again820 - - # If this is usable memory, we save it by simply advancing %di by - # sizeof(e820rec). - # -good820: - movb (E820NR), %al # up to 128 entries - cmpb $E820MAX, %al - jae bail820 - - incb (E820NR) - movw %di, %ax - addw $20, %ax - movw %ax, %di -again820: - cmpl $0, %ebx # check to see if - jne jmpe820 # %ebx is set to EOF -bail820: - - -# method E801H: -# memory size is in 1k chunksizes, to avoid confusing loadlin. -# we store the 0xe801 memory size in a completely different place, -# because it will most likely be longer than 16 bits. -# (use 1e0 because that's what Larry Augustine uses in his -# alternative new memory detection scheme, and it's sensible -# to write everything into the same place.) - -meme801: - stc # fix to work around buggy - xorw %cx,%cx # BIOSes which don't clear/set - xorw %dx,%dx # carry on pass/error of - # e801h memory size call - # or merely pass cx,dx though - # without changing them. - movw $0xe801, %ax - int $0x15 - jc mem88 - - cmpw $0x0, %cx # Kludge to handle BIOSes - jne e801usecxdx # which report their extended - cmpw $0x0, %dx # memory in AX/BX rather than - jne e801usecxdx # CX/DX. The spec I have read - movw %ax, %cx # seems to indicate AX/BX - movw %bx, %dx # are more reasonable anyway... - -e801usecxdx: - andl $0xffff, %edx # clear sign extend - shll $6, %edx # and go from 64k to 1k chunks - movl %edx, (0x1e0) # store extended memory size - andl $0xffff, %ecx # clear sign extend - addl %ecx, (0x1e0) # and add lower memory into - # total size. - -# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or -# 64mb, depending on the bios) in ax. -mem88: - -#endif - movb $0x88, %ah - int $0x15 - movw %ax, (2) - -# Set the keyboard repeat rate to the max - movw $0x0305, %ax - xorw %bx, %bx - int $0x16 - -#ifndef CONFIG_VGA_NOPROBE - -# Check for video adapter and its parameters and allow the -# user to browse video modes. - call video # NOTE: we need %ds pointing - # to bootsector -#endif - -# Get hd0 data... - xorw %ax, %ax - movw %ax, %ds - ldsw (4 * 0x41), %si - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - pushw %ax - movw %ax, %es - movw $0x0080, %di - movw $0x10, %cx - pushw %cx - cld - rep - movsb -# Get hd1 data... - xorw %ax, %ax - movw %ax, %ds - ldsw (4 * 0x46), %si - popw %cx - popw %es - movw $0x0090, %di - rep - movsb -# Check that there IS a hd1 :-) - movw $0x01500, %ax - movb $0x81, %dl - int $0x13 - jc no_disk1 - - cmpb $3, %ah - je is_disk1 - -no_disk1: - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ax, %es - movw $0x0090, %di - movw $0x10, %cx - xorw %ax, %ax - cld - rep - stosb -is_disk1: -# check for Micro Channel (MCA) bus - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ax, %ds - xorw %ax, %ax - movw %ax, (0xa0) # set table length to 0 - movb $0xc0, %ah - stc - int $0x15 # moves feature table to es:bx - jc no_mca - - pushw %ds - movw %es, %ax - movw %ax, %ds - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ax, %es - movw %bx, %si - movw $0xa0, %di - movw (%si), %cx - addw $2, %cx # table length is a short - cmpw $0x10, %cx - jc sysdesc_ok - - movw $0x10, %cx # we keep only first 16 bytes -sysdesc_ok: - rep - movsb - popw %ds -no_mca: -#ifdef CONFIG_X86_VOYAGER - movb $0xff, 0x40 # flag on config found - movb $0xc0, %al - mov $0xff, %ah - int $0x15 # put voyager config info at es:di - jc no_voyager - movw $0x40, %si # place voyager info in apm table - cld - movw $7, %cx -voyager_rep: - movb %es:(%di), %al - movb %al,(%si) - incw %di - incw %si - decw %cx - jnz voyager_rep -no_voyager: -#endif -# Check for PS/2 pointing device - movw %cs, %ax # aka SETUPSEG - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ax, %ds - movb $0, (0x1ff) # default is no pointing device - int $0x11 # int 0x11: equipment list - testb $0x04, %al # check if mouse installed - jz no_psmouse - - movb $0xAA, (0x1ff) # device present -no_psmouse: - -#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) - movl $0x0000E980, %eax # IST Support - movl $0x47534943, %edx # Request value - int $0x15 - - movl %eax, (96) - movl %ebx, (100) - movl %ecx, (104) - movl %edx, (108) -#endif - -#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE) -# Then check for an APM BIOS... - # %ds points to the bootsector - movw $0, 0x40 # version = 0 means no APM BIOS - movw $0x05300, %ax # APM BIOS installation check - xorw %bx, %bx - int $0x15 - jc done_apm_bios # Nope, no APM BIOS - - cmpw $0x0504d, %bx # Check for "PM" signature - jne done_apm_bios # No signature, no APM BIOS - - andw $0x02, %cx # Is 32 bit supported? - je done_apm_bios # No 32-bit, no (good) APM BIOS - - movw $0x05304, %ax # Disconnect first just in case - xorw %bx, %bx - int $0x15 # ignore return code - movw $0x05303, %ax # 32 bit connect - xorl %ebx, %ebx - xorw %cx, %cx # paranoia :-) - xorw %dx, %dx # ... - xorl %esi, %esi # ... - xorw %di, %di # ... - int $0x15 - jc no_32_apm_bios # Ack, error. - - movw %ax, (66) # BIOS code segment - movl %ebx, (68) # BIOS entry point offset - movw %cx, (72) # BIOS 16 bit code segment - movw %dx, (74) # BIOS data segment - movl %esi, (78) # BIOS code segment lengths - movw %di, (82) # BIOS data segment length -# Redo the installation check as the 32 bit connect -# modifies the flags returned on some BIOSs - movw $0x05300, %ax # APM BIOS installation check - xorw %bx, %bx - xorw %cx, %cx # paranoia - int $0x15 - jc apm_disconnect # error -> shouldn't happen - - cmpw $0x0504d, %bx # check for "PM" signature - jne apm_disconnect # no sig -> shouldn't happen - - movw %ax, (64) # record the APM BIOS version - movw %cx, (76) # and flags - jmp done_apm_bios - -apm_disconnect: # Tidy up - movw $0x05304, %ax # Disconnect - xorw %bx, %bx - int $0x15 # ignore return code - - jmp done_apm_bios - -no_32_apm_bios: - andw $0xfffd, (76) # remove 32 bit support bit -done_apm_bios: -#endif - -#include "edd.S" - -# Now we want to move to protected mode ... - cmpw $0, %cs:realmode_swtch - jz rmodeswtch_normal - - lcall *%cs:realmode_swtch - - jmp rmodeswtch_end - -rmodeswtch_normal: - pushw %cs - call default_switch - -rmodeswtch_end: -# Now we move the system to its rightful place ... but we check if we have a -# big-kernel. In that case we *must* not move it ... - testb $LOADED_HIGH, %cs:loadflags - jz do_move0 # .. then we have a normal low - # loaded zImage - # .. or else we have a high - # loaded bzImage - jmp end_move # ... and we skip moving - -do_move0: - movw $0x100, %ax # start of destination segment - movw %cs, %bp # aka SETUPSEG - subw $DELTA_INITSEG, %bp # aka INITSEG - movw %cs:start_sys_seg, %bx # start of source segment - cld -do_move: - movw %ax, %es # destination segment - incb %ah # instead of add ax,#0x100 - movw %bx, %ds # source segment - addw $0x100, %bx - subw %di, %di - subw %si, %si - movw $0x800, %cx - rep - movsw - cmpw %bp, %bx # assume start_sys_seg > 0x200, - # so we will perhaps read one - # page more than needed, but - # never overwrite INITSEG - # because destination is a - # minimum one page below source - jb do_move - -end_move: -# then we load the segment descriptors - movw %cs, %ax # aka SETUPSEG - movw %ax, %ds - -# Check whether we need to be downward compatible with version <=201 - cmpl $0, cmd_line_ptr - jne end_move_self # loader uses version >=202 features - cmpb $0x20, type_of_loader - je end_move_self # bootsect loader, we know of it - -# Boot loader doesnt support boot protocol version 2.02. -# If we have our code not at 0x90000, we need to move it there now. -# We also then need to move the params behind it (commandline) -# Because we would overwrite the code on the current IP, we move -# it in two steps, jumping high after the first one. - movw %cs, %ax - cmpw $SETUPSEG, %ax - je end_move_self - - cli # make sure we really have - # interrupts disabled ! - # because after this the stack - # should not be used - subw $DELTA_INITSEG, %ax # aka INITSEG - movw %ss, %dx - cmpw %ax, %dx - jb move_self_1 - - addw $INITSEG, %dx - subw %ax, %dx # this will go into %ss after - # the move -move_self_1: - movw %ax, %ds - movw $INITSEG, %ax # real INITSEG - movw %ax, %es - movw %cs:setup_move_size, %cx - std # we have to move up, so we use - # direction down because the - # areas may overlap - movw %cx, %di - decw %di - movw %di, %si - subw $move_self_here+0x200, %cx - rep - movsb - ljmp $SETUPSEG, $move_self_here - -move_self_here: - movw $move_self_here+0x200, %cx - rep - movsb - movw $SETUPSEG, %ax - movw %ax, %ds - movw %dx, %ss -end_move_self: # now we are at the right place - -# -# Enable A20. This is at the very best an annoying procedure. -# A20 code ported from SYSLINUX 1.52-1.63 by H. Peter Anvin. -# AMD Elan bug fix by Robert Schwebel. -# - -#if defined(CONFIG_X86_ELAN) - movb $0x02, %al # alternate A20 gate - outb %al, $0x92 # this works on SC410/SC520 -a20_elan_wait: - call a20_test - jz a20_elan_wait - jmp a20_done -#endif - - -A20_TEST_LOOPS = 32 # Iterations per wait -A20_ENABLE_LOOPS = 255 # Total loops to try - - -#ifndef CONFIG_X86_VOYAGER -a20_try_loop: - - # First, see if we are on a system with no A20 gate. -a20_none: - call a20_test - jnz a20_done - - # Next, try the BIOS (INT 0x15, AX=0x2401) -a20_bios: - movw $0x2401, %ax - pushfl # Be paranoid about flags - int $0x15 - popfl - - call a20_test - jnz a20_done - - # Try enabling A20 through the keyboard controller -#endif /* CONFIG_X86_VOYAGER */ -a20_kbc: - call empty_8042 - -#ifndef CONFIG_X86_VOYAGER - call a20_test # Just in case the BIOS worked - jnz a20_done # but had a delayed reaction. -#endif - - movb $0xD1, %al # command write - outb %al, $0x64 - call empty_8042 - - movb $0xDF, %al # A20 on - outb %al, $0x60 - call empty_8042 - -#ifndef CONFIG_X86_VOYAGER - # Wait until a20 really *is* enabled; it can take a fair amount of - # time on certain systems; Toshiba Tecras are known to have this - # problem. -a20_kbc_wait: - xorw %cx, %cx -a20_kbc_wait_loop: - call a20_test - jnz a20_done - loop a20_kbc_wait_loop - - # Final attempt: use "configuration port A" -a20_fast: - inb $0x92, %al # Configuration Port A - orb $0x02, %al # "fast A20" version - andb $0xFE, %al # don't accidentally reset - outb %al, $0x92 - - # Wait for configuration port A to take effect -a20_fast_wait: - xorw %cx, %cx -a20_fast_wait_loop: - call a20_test - jnz a20_done - loop a20_fast_wait_loop - - # A20 is still not responding. Try frobbing it again. - # - decb (a20_tries) - jnz a20_try_loop - - movw $a20_err_msg, %si - call prtstr - -a20_die: - hlt - jmp a20_die - -a20_tries: - .byte A20_ENABLE_LOOPS - -a20_err_msg: - .ascii "linux: fatal error: A20 gate not responding!" - .byte 13, 10, 0 - - # If we get here, all is good -a20_done: - -#endif /* CONFIG_X86_VOYAGER */ -# set up gdt and idt and 32bit start address - lidt idt_48 # load idt with 0,0 - xorl %eax, %eax # Compute gdt_base - movw %ds, %ax # (Convert %ds:gdt to a linear ptr) - shll $4, %eax - addl %eax, code32 - addl $gdt, %eax - movl %eax, (gdt_48+2) - lgdt gdt_48 # load gdt with whatever is - # appropriate - -# make sure any possible coprocessor is properly reset.. - xorw %ax, %ax - outb %al, $0xf0 - call delay - - outb %al, $0xf1 - call delay - -# well, that went ok, I hope. Now we mask all interrupts - the rest -# is done in init_IRQ(). - movb $0xFF, %al # mask all interrupts for now - outb %al, $0xA1 - call delay - - movb $0xFB, %al # mask all irq's but irq2 which - outb %al, $0x21 # is cascaded - -# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't -# need no steenking BIOS anyway (except for the initial loading :-). -# The BIOS-routine wants lots of unnecessary data, and it's less -# "interesting" anyway. This is how REAL programmers do it. -# -# Well, now's the time to actually move into protected mode. To make -# things as simple as possible, we do no register set-up or anything, -# we let the gnu-compiled 32-bit programs do that. We just jump to -# absolute address 0x1000 (or the loader supplied one), -# in 32-bit protected mode. -# -# Note that the short jump isn't strictly needed, although there are -# reasons why it might be a good idea. It won't hurt in any case. - movw $1, %ax # protected mode (PE) bit - lmsw %ax # This is it! - jmp flush_instr - -flush_instr: - xorw %bx, %bx # Flag to indicate a boot - xorl %esi, %esi # Pointer to real-mode code - movw %cs, %si - subw $DELTA_INITSEG, %si - shll $4, %esi # Convert to 32-bit pointer - -# jump to startup_32 in arch/i386/boot/compressed/head.S -# -# NOTE: For high loaded big kernels we need a -# jmpi 0x100000,__BOOT_CS -# -# but we yet haven't reloaded the CS register, so the default size -# of the target offset still is 16 bit. -# However, using an operand prefix (0x66), the CPU will properly -# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference -# Manual, Mixing 16-bit and 32-bit code, page 16-6) - - .byte 0x66, 0xea # prefix + jmpi-opcode -code32: .long startup_32 # will be set to %cs+startup_32 - .word __BOOT_CS -.code32 -startup_32: - movl $(__BOOT_DS), %eax - movl %eax, %ds - movl %eax, %es - movl %eax, %fs - movl %eax, %gs - movl %eax, %ss - - xorl %eax, %eax -1: incl %eax # check that A20 really IS enabled - movl %eax, 0x00000000 # loop forever if it isn't - cmpl %eax, 0x00100000 - je 1b - - # Jump to the 32bit entry point - jmpl *(code32_start - start + (DELTA_INITSEG << 4))(%esi) -.code16 - -# Here's a bunch of information about your current kernel.. -kernel_version: .ascii UTS_RELEASE - .ascii " (" - .ascii LINUX_COMPILE_BY - .ascii "@" - .ascii LINUX_COMPILE_HOST - .ascii ") " - .ascii UTS_VERSION - .byte 0 - -# This is the default real mode switch routine. -# to be called just before protected mode transition -default_switch: - cli # no interrupts allowed ! - movb $0x80, %al # disable NMI for bootup - # sequence - outb %al, $0x70 - lret - - -#ifndef CONFIG_X86_VOYAGER -# This routine tests whether or not A20 is enabled. If so, it -# exits with zf = 0. -# -# The memory address used, 0x200, is the int $0x80 vector, which -# should be safe. - -A20_TEST_ADDR = 4*0x80 - -a20_test: - pushw %cx - pushw %ax - xorw %cx, %cx - movw %cx, %fs # Low memory - decw %cx - movw %cx, %gs # High memory area - movw $A20_TEST_LOOPS, %cx - movw %fs:(A20_TEST_ADDR), %ax - pushw %ax -a20_test_wait: - incw %ax - movw %ax, %fs:(A20_TEST_ADDR) - call delay # Serialize and make delay constant - cmpw %gs:(A20_TEST_ADDR+0x10), %ax - loope a20_test_wait - - popw %fs:(A20_TEST_ADDR) - popw %ax - popw %cx - ret - -#endif /* CONFIG_X86_VOYAGER */ - -# This routine checks that the keyboard command queue is empty -# (after emptying the output buffers) -# -# Some machines have delusions that the keyboard buffer is always full -# with no keyboard attached... -# -# If there is no keyboard controller, we will usually get 0xff -# to all the reads. With each IO taking a microsecond and -# a timeout of 100,000 iterations, this can take about half a -# second ("delay" == outb to port 0x80). That should be ok, -# and should also be plenty of time for a real keyboard controller -# to empty. -# - -empty_8042: - pushl %ecx - movl $100000, %ecx - -empty_8042_loop: - decl %ecx - jz empty_8042_end_loop - - call delay - - inb $0x64, %al # 8042 status port - testb $1, %al # output buffer? - jz no_output - - call delay - inb $0x60, %al # read it - jmp empty_8042_loop - -no_output: - testb $2, %al # is input buffer full? - jnz empty_8042_loop # yes - loop -empty_8042_end_loop: - popl %ecx - ret - -# Read the cmos clock. Return the seconds in al -gettime: - pushw %cx - movb $0x02, %ah - int $0x1a - movb %dh, %al # %dh contains the seconds - andb $0x0f, %al - movb %dh, %ah - movb $0x04, %cl - shrb %cl, %ah - aad - popw %cx - ret - -# Delay is needed after doing I/O -delay: - outb %al,$0x80 - ret - -# Descriptor tables -# -# NOTE: The intel manual says gdt should be sixteen bytes aligned for -# efficiency reasons. However, there are machines which are known not -# to boot with misaligned GDTs, so alter this at your peril! If you alter -# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two -# empty GDT entries (one for NULL and one reserved). -# -# NOTE: On some CPUs, the GDT must be 8 byte aligned. This is -# true for the Voyager Quad CPU card which will not boot without -# This directive. 16 byte aligment is recommended by intel. -# - .align 16 -gdt: - .fill GDT_ENTRY_BOOT_CS,8,0 - - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9A00 # code read/exec - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) - - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9200 # data read/write - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) -gdt_end: - .align 4 - - .word 0 # alignment byte -idt_48: - .word 0 # idt limit = 0 - .word 0, 0 # idt base = 0L - - .word 0 # alignment byte -gdt_48: - .word gdt_end - gdt - 1 # gdt limit - .word 0, 0 # gdt base (filled in later) - -#ifndef CONFIG_VGA_NOPROBE -# Include video setup & detection code - -#include "video.S" -#endif - -# Setup signature -- must be last -setup_sig1: .word SIG1 -setup_sig2: .word SIG2 - -# After this point, there is some free space which is used by the video mode -# handling code to store the temporary mode table (not used by the kernel). - -modelist: - -.text -endtext: -.data -enddata: -.bss -endbss: diff --git a/target/linux/olpc/files/arch/i386/configs/olpc_defconfig b/target/linux/olpc/files/arch/i386/configs/olpc_defconfig deleted file mode 100644 index f1675e8631..0000000000 --- a/target/linux/olpc/files/arch/i386/configs/olpc_defconfig +++ /dev/null @@ -1,2183 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc5 -# Wed Jun 20 08:26:53 2007 -# -CONFIG_X86_32=y -CONFIG_GENERIC_TIME=y -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y -CONFIG_X86=y -CONFIG_MMU=y -CONFIG_ZONE_DMA=y -CONFIG_QUICKLIST=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_DMI=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -# CONFIG_BASE_FULL is not set -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=1 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" - -# -# Processor type and features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -# CONFIG_SMP is not set -CONFIG_X86_PC=y -# CONFIG_X86_ELAN is not set -# CONFIG_X86_VOYAGER is not set -# CONFIG_X86_NUMAQ is not set -# CONFIG_X86_SUMMIT is not set -# CONFIG_X86_BIGSMP is not set -# CONFIG_X86_VISWS is not set -# CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_ES7000 is not set -# CONFIG_PARAVIRT is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMII is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMM is not set -# CONFIG_MCORE2 is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MEFFICEON is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MGEODEGX1 is not set -CONFIG_MGEODE_LX=y -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_MVIAC7 is not set -# CONFIG_X86_GENERIC is not set -CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=5 -CONFIG_X86_XADD=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_INVLPG=y -CONFIG_X86_BSWAP=y -CONFIG_X86_POPAD_OK=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_USE_3DNOW=y -CONFIG_X86_TSC=y -CONFIG_X86_MINIMUM_CPU_MODEL=4 -# CONFIG_HPET_TIMER is not set -# CONFIG_PREEMPT_NONE is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y -# CONFIG_X86_UP_APIC is not set -# CONFIG_X86_MCE is not set -# CONFIG_VM86 is not set -# CONFIG_TOSHIBA is not set -# CONFIG_I8K is not set -CONFIG_X86_REBOOTFIXUPS=y -# CONFIG_MICROCODE is not set -CONFIG_X86_MSR=y -CONFIG_X86_CPUID=m - -# -# Firmware Drivers -# -# CONFIG_EDD is not set -# CONFIG_DELL_RBU is not set -# CONFIG_DCDBAS is not set -CONFIG_NOHIGHMEM=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_3G_OPT is not set -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_2G_OPT is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_SPARSEMEM_STATIC=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_NR_QUICK=1 -# CONFIG_MATH_EMULATION is not set -# CONFIG_MTRR is not set -# CONFIG_SECCOMP is not set -# CONFIG_VGA_NOPROBE is not set -CONFIG_HZ_100=y -# CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=100 -CONFIG_KEXEC=y -CONFIG_PHYSICAL_START=0x400000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x100000 -# CONFIG_COMPAT_VDSO is not set - -# -# Power management options (ACPI, APM) -# -CONFIG_PM=y -CONFIG_PM_LEGACY=y -CONFIG_PM_DEBUG=y -CONFIG_DISABLE_SUSPEND_VT_SWITCH=y -# CONFIG_PM_TRACE is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set -CONFIG_SOFTWARE_SUSPEND=y -CONFIG_PM_STD_PARTITION="" - -# -# ACPI (Advanced Configuration and Power Interface) Support -# -# CONFIG_ACPI is not set -# CONFIG_APM is not set - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GOMMCONFIG is not set -# CONFIG_PCI_GODIRECT is not set -# CONFIG_PCI_GOANY is not set -CONFIG_PCI_GOOLPC=y -CONFIG_PCI_DIRECT=y -CONFIG_PCI_OLPC=y -# CONFIG_PCIEPORTBUS is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCI_DEBUG is not set -CONFIG_ISA_DMA_API=y -# CONFIG_ISA is not set -# CONFIG_MCA is not set -# CONFIG_SCx200 is not set -CONFIG_GEODE_MFGPT_TIMER=y -CONFIG_OLPC=y -CONFIG_OLPC_PM=y -CONFIG_OPEN_FIRMWARE=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -CONFIG_BINFMT_MISC=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=m -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set -CONFIG_IP_ROUTE_VERBOSE=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_DIAG is not set -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_BIC=y -CONFIG_TCP_CONG_CUBIC=m -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_DEFAULT_BIC=y -# CONFIG_DEFAULT_CUBIC is not set -# CONFIG_DEFAULT_HTCP is not set -# CONFIG_DEFAULT_VEGAS is not set -# CONFIG_DEFAULT_WESTWOOD is not set -# CONFIG_DEFAULT_RENO is not set -CONFIG_DEFAULT_TCP_CONG="bic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set -CONFIG_IPV6=y -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=y -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -# CONFIG_NETLABEL is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -# CONFIG_NETFILTER_NETLINK_QUEUE is not set -# CONFIG_NETFILTER_NETLINK_LOG is not set -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK=m -# CONFIG_NF_CT_ACCT is not set -# CONFIG_NF_CONNTRACK_MARK is not set -# CONFIG_NF_CONNTRACK_SECMARK is not set -# CONFIG_NF_CONNTRACK_EVENTS is not set -# CONFIG_NF_CT_PROTO_SCTP is not set -# CONFIG_NF_CONNTRACK_AMANDA is not set -CONFIG_NF_CONNTRACK_FTP=m -# CONFIG_NF_CONNTRACK_H323 is not set -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -# CONFIG_NF_CONNTRACK_PPTP is not set -# CONFIG_NF_CONNTRACK_SANE is not set -# CONFIG_NF_CONNTRACK_SIP is not set -# CONFIG_NF_CONNTRACK_TFTP is not set -# CONFIG_NF_CT_NETLINK is not set -CONFIG_NETFILTER_XTABLES=m -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set -# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set -# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_HELPER is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -CONFIG_NETFILTER_XT_MATCH_STATE=m -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -# CONFIG_IP_NF_MATCH_IPRANGE is not set -# CONFIG_IP_NF_MATCH_TOS is not set -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_AH is not set -# CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_OWNER is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -CONFIG_IP_NF_FILTER=m -# CONFIG_IP_NF_TARGET_REJECT is not set -CONFIG_IP_NF_TARGET_LOG=m -# CONFIG_IP_NF_TARGET_ULOG is not set -CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -# CONFIG_IP_NF_TARGET_REDIRECT is not set -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -# CONFIG_NF_NAT_SNMP_BASIC is not set -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -# CONFIG_NF_NAT_TFTP is not set -# CONFIG_NF_NAT_AMANDA is not set -# CONFIG_NF_NAT_PPTP is not set -# CONFIG_NF_NAT_H323 is not set -# CONFIG_NF_NAT_SIP is not set -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_RAW is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_NF_CONNTRACK_IPV6 is not set -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_FIFO=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_INGRESS=m - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -# CONFIG_NET_ACT_IPT is not set -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_CLS_IND=y -CONFIG_NET_ESTIMATOR=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_TCPPROBE is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -CONFIG_FIB_RULES=y - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -CONFIG_IEEE80211_SOFTMAC_DEBUG=y -# CONFIG_RFKILL is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=m -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_TS5500 is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_CAFE=y -# CONFIG_MTD_NAND_CS553X is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_UB=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_IBM_ASM is not set -# CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_EEPROM_93CX6 is not set -CONFIG_IDE=m -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=m - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=m -CONFIG_IDEDISK_MULTI_MODE=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_IDE_TASK_IOCTL=y -# CONFIG_IDE_PROC_FS is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=m -# CONFIG_BLK_DEV_CMD640 is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_RZ1000 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_ONLYDISK=y -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_ATIIXP is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_CS5535 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=m -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_IFB=m -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m -# CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -# CONFIG_PCNET32_NAPI is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -CONFIG_NE2K_PCI=m -CONFIG_8139CP=m -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_DEBUG=y -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set -# CONFIG_PRISM54 is not set -# CONFIG_USB_ZD1201 is not set -# CONFIG_PRISM54_USB is not set -# CONFIG_HOSTAP is not set -# CONFIG_BCM43XX is not set -# CONFIG_ZD1211RW is not set -# CONFIG_ADM8211 is not set -# CONFIG_ACX_PCI is not set -# CONFIG_ACX_USB is not set - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET_MII=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -# CONFIG_USB_KC2190 is not set -CONFIG_USB_NET_ZAURUS=m -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -# CONFIG_PPP_BSDCOMP is not set -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLHC=m -CONFIG_SLIP_SMART=y -# CONFIG_SLIP_MODE_SLIP6 is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=m -CONFIG_NETPOLL=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -# CONFIG_MOUSE_PS2_ALPS is not set -# CONFIG_MOUSE_PS2_LOGIPS2PP is not set -# CONFIG_MOUSE_PS2_SYNAPTICS is not set -# CONFIG_MOUSE_PS2_LIFEBOOK is not set -# CONFIG_MOUSE_PS2_TRACKPOINT is not set -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -CONFIG_MOUSE_PS2_OLPC=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_PCSPKR=m -# CONFIG_INPUT_WISTRON_BTNS is not set -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -CONFIG_INPUT_UINPUT=m - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_RAW=m -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m -# CONFIG_ACQUIRE_WDT is not set -# CONFIG_ADVANTECH_WDT is not set -# CONFIG_ALIM1535_WDT is not set -# CONFIG_ALIM7101_WDT is not set -# CONFIG_SC520_WDT is not set -# CONFIG_EUROTECH_WDT is not set -# CONFIG_IB700_WDT is not set -# CONFIG_IBMASR is not set -# CONFIG_WAFER_WDT is not set -# CONFIG_I6300ESB_WDT is not set -# CONFIG_ITCO_WDT is not set -# CONFIG_SC1200_WDT is not set -# CONFIG_PC87413_WDT is not set -# CONFIG_60XX_WDT is not set -# CONFIG_SBC8360_WDT is not set -# CONFIG_CPU5_WDT is not set -# CONFIG_SMSC37B787_WDT is not set -# CONFIG_W83627HF_WDT is not set -# CONFIG_W83697HF_WDT is not set -# CONFIG_W83877F_WDT is not set -# CONFIG_W83977F_WDT is not set -# CONFIG_MACHZ_WDT is not set -# CONFIG_SBC_EPX_C3_WATCHDOG is not set - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_HW_RANDOM_INTEL is not set -# CONFIG_HW_RANDOM_AMD is not set -CONFIG_HW_RANDOM_GEODE=y -# CONFIG_HW_RANDOM_VIA is not set -CONFIG_NVRAM=y -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_SONYPI is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_MWAVE is not set -# CONFIG_PC8736x_GPIO is not set -# CONFIG_NSC_GPIO is not set -CONFIG_CS5535_GPIO=m -# CONFIG_RAW_DRIVER is not set -CONFIG_HANGCHECK_TIMER=m - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set -CONFIG_SCx200_ACB=y -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PDA_POWER is not set -# CONFIG_BATTERY_DS2760 is not set -CONFIG_BATTERY_OLPC=y -# CONFIG_HWMON is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=y -# CONFIG_VIDEO_V4L1 is not set -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set - -# -# Encoders/decoders and other helper chips -# - -# -# Audio decoders -# -# CONFIG_VIDEO_TDA9840 is not set -# CONFIG_VIDEO_TEA6415C is not set -# CONFIG_VIDEO_TEA6420 is not set -# CONFIG_VIDEO_MSP3400 is not set -# CONFIG_VIDEO_CS53L32A is not set -# CONFIG_VIDEO_TLV320AIC23B is not set -# CONFIG_VIDEO_WM8775 is not set -# CONFIG_VIDEO_WM8739 is not set - -# -# Video decoders -# -CONFIG_VIDEO_OV7670=y -# CONFIG_VIDEO_SAA711X is not set -# CONFIG_VIDEO_TVP5150 is not set - -# -# Video and audio decoders -# -# CONFIG_VIDEO_CX25840 is not set - -# -# MPEG video encoders -# -# CONFIG_VIDEO_CX2341X is not set - -# -# Video encoders -# -# CONFIG_VIDEO_SAA7127 is not set - -# -# Video improvement chips -# -# CONFIG_VIDEO_UPD64031A is not set -# CONFIG_VIDEO_UPD64083 is not set -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_VIDEO_SAA7134 is not set -# CONFIG_VIDEO_HEXIUM_ORION is not set -# CONFIG_VIDEO_HEXIUM_GEMINI is not set -# CONFIG_VIDEO_CX88 is not set -CONFIG_VIDEO_CAFE_CCIC=y -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_USBVISION is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_RADIO_GEMTEK_PCI is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_MAESTRO is not set -# CONFIG_USB_DSBR is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_PROGEAR is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -CONFIG_VGASTATE=m -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ARC is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -CONFIG_FB_VGA16=m -CONFIG_FB_VESA=y -# CONFIG_FB_HECUBA is not set -# CONFIG_FB_HGA is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_I810 is not set -# CONFIG_FB_LE80578 is not set -# CONFIG_FB_INTEL is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_PM3 is not set -CONFIG_FB_GEODE=y -CONFIG_FB_GEODE_LX=y -CONFIG_FB_GEODE_GX=y -# CONFIG_FB_GEODE_GX1 is not set -CONFIG_FB_OLPC_DCON=y -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 -CONFIG_VIDEO_SELECT=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -CONFIG_FONT_SUN12x22=y -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_MPU401_UART=m -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DUMMY=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_MTPAV=m -# CONFIG_SND_SERIAL_U16550 is not set -CONFIG_SND_MPU401=m - -# -# PCI devices -# -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -CONFIG_SND_CS5535AUDIO=y -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -CONFIG_SND_ENS1370=m -CONFIG_SND_ENS1371=m -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=m -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -CONFIG_SND_AC97_POWER_SAVE=y - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_USX2Y=m -# CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# -# CONFIG_SND_SOC is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -CONFIG_USB_PERSIST=y -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_USBAT=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_STORAGE_ALAUDA=y -# CONFIG_USB_STORAGE_KARMA is not set -CONFIG_USB_LIBUSUAL=y - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -CONFIG_USB_SERIAL_CP2101=m -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -# CONFIG_USB_SERIAL_EMPEG is not set -CONFIG_USB_SERIAL_FTDI_SIO=m -# CONFIG_USB_SERIAL_FUNSOFT is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_GARMIN is not set -# CONFIG_USB_SERIAL_IPW is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_HP4X is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -# CONFIG_USB_SERIAL_TI is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OPTION is not set -# CONFIG_USB_SERIAL_OMNINET is not set -# CONFIG_USB_SERIAL_DEBUG is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_UNSAFE_RESUME is not set - -# -# MMC/SD Card Drivers -# -CONFIG_MMC_BLOCK=y - -# -# MMC/SD Host Controller Drivers -# -CONFIG_MMC_SDHCI=y -# CONFIG_MMC_WBSD is not set -# CONFIG_MMC_TIFM_SD is not set - -# -# LED devices -# -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -# CONFIG_LEDS_TRIGGER_IDE_DISK is not set -CONFIG_LEDS_TRIGGER_HEARTBEAT=y - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# -# CONFIG_EDAC is not set - -# -# Real Time Clock -# -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Virtualization -# -# CONFIG_KVM is not set - -# -# Sysprof -# -CONFIG_SYSPROF=m - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_QUOTA=y -# CONFIG_QFMT_V1 is not set -CONFIG_QFMT_V2=y -CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_PROMFS_FS=y -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_FS_WBUF_VERIFY=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -# CONFIG_JFFS2_FS_POSIX_ACL is not set -CONFIG_JFFS2_FS_SECURITY=y -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=m -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_RPCSEC_GSS_SPKM3=m -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Instrumentation Support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_KPROBES=y - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHEDSTATS=y -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -CONFIG_DEBUG_SPINLOCK=y -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -CONFIG_DEBUG_SPINLOCK_SLEEP=y -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_VM=y -CONFIG_DEBUG_LIST=y -# CONFIG_FRAME_POINTER is not set -# CONFIG_FORCED_INLINING is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_LKDTM is not set -# CONFIG_FAULT_INJECTION is not set -CONFIG_EARLY_PRINTK=y -CONFIG_DEBUG_STACKOVERFLOW=y -CONFIG_DEBUG_STACK_USAGE=y - -# -# Page alloc debug is incompatible with Software Suspend on i386 -# -CONFIG_DEBUG_RODATA=y -CONFIG_4KSTACKS=y -CONFIG_DOUBLEFAULT=y - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -CONFIG_SECURITY=y -CONFIG_SECURITY_NETWORK=y -CONFIG_SECURITY_NETWORK_XFRM=y -CONFIG_SECURITY_CAPABILITIES=y -# CONFIG_SECURITY_ROOTPLUG is not set -CONFIG_SECURITY_SELINUX=y -CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 -# CONFIG_SECURITY_SELINUX_DISABLE is not set -CONFIG_SECURITY_SELINUX_DEVELOP=y -CONFIG_SECURITY_SELINUX_AVC_STATS=y -CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 -# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set -# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -# CONFIG_CRYPTO_TWOFISH_586 is not set -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_AES_586=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# -# CONFIG_CRYPTO_DEV_PADLOCK is not set -CONFIG_CRYPTO_DEV_GEODE=y - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_AUDIT_GENERIC=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_REED_SOLOMON=y -CONFIG_REED_SOLOMON_DEC16=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_X86_BIOS_REBOOT=y -CONFIG_KTIME_SCALAR=y diff --git a/target/linux/olpc/files/arch/i386/kernel/mfgpt.c b/target/linux/olpc/files/arch/i386/kernel/mfgpt.c deleted file mode 100644 index 2e62a41e7f..0000000000 --- a/target/linux/olpc/files/arch/i386/kernel/mfgpt.c +++ /dev/null @@ -1,354 +0,0 @@ -/* Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT) - * - * Copyright (C) 2006, Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* The MFPGT timers on the CS5536 provide us with suitable timers to use - * as clock event sources - not as good as a HPET or APIC, but certainly - * better then the PIT. This isn't a general purpose MFGPT driver, but - * a simplified one designed specifically to act as a clock event source. - * For full details about the MFGPT, please consult the CS5536 data sheet. -*/ - -/* We are using the 32Khz input clock - its the only one that has the - * ranges we find desirable. The following table lists the suitable - * divisors and the associated hz, minimum interval - * and the maximum interval: - - Divisor Hz Min Delta (S) Max Delta (S) - 1 32000 .0005 2.048 - 2 16000 .001 4.096 - 4 8000 .002 8.192 - 8 4000 .004 16.384 - 16 2000 .008 32.768 - 32 1000 .016 65.536 - 64 500 .032 131.072 - 128 250 .064 262.144 - 256 125 .128 524.288 -*/ - -#include -#include -#include -#include -#include -#include - -#include "do_timer.h" - -#define MFGPT_MAX_TIMERS 8 - -#define F_AVAIL 0x01 - -static struct mfgpt_timer_t { - int flags; - struct module *owner; -} mfgpt_timers[MFGPT_MAX_TIMERS]; - -/* Selected from the table above */ - -#define MFGPT_DIVISOR 16 -#define MFGPT_SCALE 4 /* divisor = 2^(scale) */ -#define MFGPT_HZ (32000 / MFGPT_DIVISOR) -#define MFGPT_PERIODIC (MFGPT_HZ / HZ) - -#ifdef CONFIG_GEODE_MFGPT_TIMER -static int __init mfgpt_timer_setup(void); -#else -#define mfgpt_timer_setup() (0) -#endif - -/* Allow for disabling of MFGPTs */ -static int disable = 0; -static int __init mfgpt_disable(char *s) -{ - disable = 1; - return 1; -} -__setup("nomfgpt", mfgpt_disable); - -/* - * Check whether any MFGPTs are available for the kernel to use. In most - * cases, firmware that uses AMD's VSA code will claim all timers during - * bootup; we certainly don't want to take them if they're already in use. - * In other cases (such as with VSAless OpenFirmware), the system firmware - * leaves timers available for us to use. - */ -int __init geode_mfgpt_detect(void) -{ - int count = 0, i; - u16 val; - - if (disable) { - printk(KERN_INFO "geode-mfgpt: Skipping MFGPT setup\n"); - return 0; - } - - for (i = 0; i < MFGPT_MAX_TIMERS; i++) { - val = geode_mfgpt_read(i, MFGPT_REG_SETUP); - if (!(val & MFGPT_SETUP_SETUP)) { - mfgpt_timers[i].flags = F_AVAIL; - count++; - } - } - - /* set up clock event device, if desired */ - i = mfgpt_timer_setup(); - - return count; -} - -int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable) -{ - u32 msr, mask, value, dummy; - int shift = (cmp == MFGPT_CMP1) ? 0 : 8; - - if (timer < 0 || timer >= MFGPT_MAX_TIMERS) - return -EIO; - - /* - * The register maps for these are described in sections 6.17.1.x of - * the AMD Geode CS5536 Companion Device Data Book. - */ - switch(event) { - case MFGPT_EVENT_RESET: - /* XXX: According to the docs, we cannot reset timers above - * 6; that is, resets for 7 and 8 will be ignored. Is this - * a problem? */ - msr = MFGPT_NR_MSR; - mask = 1 << (timer + 24); - break; - - case MFGPT_EVENT_NMI: - msr = MFGPT_NR_MSR; - mask = 1 << (timer + shift); - break; - - case MFGPT_EVENT_IRQ: - msr = MFGPT_IRQ_MSR; - mask = 1 << (timer + shift); - break; - - default: - return -EIO; - } - - rdmsr(msr, value, dummy); - - if (enable) - value |= mask; - else - value &= ~mask; - - wrmsr(msr, value, dummy); - return 0; -} -EXPORT_SYMBOL(geode_mfgpt_toggle_event); - -int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable) -{ - u32 val, dummy; - int offset; - - if (timer < 0 || timer >= MFGPT_MAX_TIMERS) - return -EIO; - - if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable)) - return -EIO; - - rdmsr(0x51400022, val, dummy); - - offset = (timer % 4) * 4; - - val &= ~((0xF << offset) | (0xF << (offset + 16))); - - if (enable) { - val |= (irq & 0x0F) << (offset); - val |= (irq & 0x0F) << (offset + 16); - } - - wrmsr(0x51400022, val, dummy); - return 0; -} -EXPORT_SYMBOL(geode_mfgpt_set_irq); - -static int mfgpt_get(int timer, struct module *owner) -{ - mfgpt_timers[timer].flags &= ~F_AVAIL; - mfgpt_timers[timer].owner = owner; - printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer); - return timer; -} - -int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner) -{ - int i; - - if (!geode_get_dev_base(GEODE_DEV_MFGPT)) - return -ENODEV; - if (timer >= MFGPT_MAX_TIMERS) - return -EIO; - - if (timer < 0) { - /* Try to find an available timer */ - for (i = 0; i < MFGPT_MAX_TIMERS; i++) { - if (mfgpt_timers[i].flags & F_AVAIL) - return mfgpt_get(i, owner); - - if (i == 5 && domain == MFGPT_DOMAIN_WORKING) - break; - } - } - else { - /* If they requested a specific timer, try to honor that */ - if (mfgpt_timers[timer].flags & F_AVAIL) - return mfgpt_get(timer, owner); - } - - /* No timers available - too bad */ - return -1; -} -EXPORT_SYMBOL(geode_mfgpt_alloc_timer); - -#ifdef CONFIG_GEODE_MFGPT_TIMER - -static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN; -static u16 mfgpt_event_clock; - -static int irq = 7; -static int __init mfgpt_setup(char *str) -{ - get_option(&str, &irq); - return 1; -} -__setup("mfgpt_irq=", mfgpt_setup); - -static inline void mfgpt_disable_timer(u16 clock) -{ - u16 val = geode_mfgpt_read(clock, MFGPT_REG_SETUP); - geode_mfgpt_write(clock, MFGPT_REG_SETUP, val & ~MFGPT_SETUP_CNTEN); -} - -static int mfgpt_next_event(unsigned long, struct clock_event_device *); -static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *); - -static struct clock_event_device mfgpt_clockevent = { - .name = "mfgpt-timer", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = mfgpt_set_mode, - .set_next_event = mfgpt_next_event, - .rating = 250, - .cpumask = CPU_MASK_ALL, - .shift = 32 -}; - -static inline void mfgpt_start_timer(u16 clock, u16 delta) -{ - geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta); - geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0); - - geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, - MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2); -} - -static void mfgpt_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - mfgpt_disable_timer(mfgpt_event_clock); - - if (mode == CLOCK_EVT_MODE_PERIODIC) - mfgpt_start_timer(mfgpt_event_clock, MFGPT_PERIODIC); - - mfgpt_tick_mode = mode; -} - -static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt) -{ - mfgpt_start_timer(mfgpt_event_clock, delta); - return 0; -} - -/* Assume (foolishly?), that this interrupt was due to our tick */ - -static irqreturn_t mfgpt_tick(int irq, void *dev_id) -{ - if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN) - return IRQ_HANDLED; - - /* Turn off the clock */ - mfgpt_disable_timer(mfgpt_event_clock); - - /* Clear the counter */ - geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0); - - /* Restart the clock in periodic mode */ - - if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) { - geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, - MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2); - } - - mfgpt_clockevent.event_handler(&mfgpt_clockevent); - return IRQ_HANDLED; -} - -static struct irqaction mfgptirq = { - .handler = mfgpt_tick, - .flags = IRQF_DISABLED | IRQF_NOBALANCING, - .mask = CPU_MASK_NONE, - .name = "mfgpt-timer" -}; - -static int __init mfgpt_timer_setup(void) -{ - int timer, ret; - u16 val; - - timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING, THIS_MODULE); - if (timer < 0) { - printk(KERN_ERR "mfgpt-timer: Could not allocate a MFPGT timer\n"); - return -ENODEV; - } - - mfgpt_event_clock = timer; - /* Set the clock scale and enable the event mode for CMP2 */ - val = MFGPT_SCALE | (3 << 8); - - geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val); - - /* Set up the IRQ on the MFGPT side */ - if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) { - printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq); - return -EIO; - } - - /* And register it with the kernel */ - ret = setup_irq(irq, &mfgptirq); - - if (ret) { - printk(KERN_ERR "mfgpt-timer: Unable to set up the interrupt.\n"); - goto err; - } - - /* Set up the clock event */ - mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, 32); - mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &mfgpt_clockevent); - mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE, &mfgpt_clockevent); - - printk("mfgpt-timer: registering the MFGT timer as a clock event.\n"); - clockevents_register_device(&mfgpt_clockevent); - - return 0; - -err: - geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq); - printk(KERN_ERR "mfgpt-timer: Unable to set up the MFGPT clock source\n"); - return -EIO; -} - -#endif diff --git a/target/linux/olpc/files/arch/i386/kernel/ofw.c b/target/linux/olpc/files/arch/i386/kernel/ofw.c deleted file mode 100644 index fdcd93629a..0000000000 --- a/target/linux/olpc/files/arch/i386/kernel/ofw.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * ofw.c - Open Firmware client interface for 32-bit systems. - * This code is intended to be portable to any 32-bit Open Firmware - * implementation with a standard client interface that can be - * called when Linux is running. - * - * Copyright (C) 2007 Mitch Bradley - * Copyright (C) 2007 Andres Salomon - */ - -#include -#include -#include -#include - - -int (*call_firmware)(int *); - -static DEFINE_SPINLOCK(prom_lock); - -#define MAXARGS 20 - -/* - * The return value from ofw() in all cases is 0 if the attempt to call the - * function succeeded, <0 otherwise. That return value is from the - * gateway function only. Any results from the called function are returned - * via output argument pointers. - * - * Here are call templates for all the standard OFW client services: - * - * ofw("test", 1, 1, namestr, &missing); - * ofw("peer", 1, 1, phandle, &sibling_phandle); - * ofw("child", 1, 1, phandle, &child_phandle); - * ofw("parent", 1, 1, phandle, &parent_phandle); - * ofw("instance_to_package", 1, 1, ihandle, &phandle); - * ofw("getproplen", 2, 1, phandle, namestr, &proplen); - * ofw("getprop", 4, 1, phandle, namestr, bufaddr, buflen, &size); - * ofw("nextprop", 3, 1, phandle, previousstr, bufaddr, &flag); - * ofw("setprop", 4, 1, phandle, namestr, bufaddr, len, &size); - * ofw("canon", 3, 1, devspecstr, bufaddr, buflen, &length); - * ofw("finddevice", 1, 1, devspecstr, &phandle); - * ofw("instance-to-path", 3, 1, ihandle, bufaddr, buflen, &length); - * ofw("package-to-path", 3, 1, phandle, bufaddr, buflen, &length); - * ofw("call_method", numin, numout, in0, in1, ..., &out0, &out1, ...); - * ofw("open", 1, 1, devspecstr, &ihandle); - * ofw("close", 1, 0, ihandle); - * ofw("read", 3, 1, ihandle, addr, len, &actual); - * ofw("write", 3, 1, ihandle, addr, len, &actual); - * ofw("seek", 3, 1, ihandle, pos_hi, pos_lo, &status); - * ofw("claim", 3, 1, virtaddr, size, align, &baseaddr); - * ofw("release", 2, 0, virtaddr, size); - * ofw("boot", 1, 0, bootspecstr); - * ofw("enter", 0, 0); - * ofw("exit", 0, 0); - * ofw("chain", 5, 0, virtaddr, size, entryaddr, argsaddr, len); - * ofw("interpret", numin+1, numout+1, cmdstr, in0, ..., &catchres, &out0, ...); - * ofw("set-callback", 1, 1, newfuncaddr, &oldfuncaddr); - * ofw("set-symbol-lookup", 2, 0, symtovaladdr, valtosymaddr); - * ofw("milliseconds", 0, 1, &ms); - */ - -int ofw(char *name, int numargs, int numres, ...) -{ - va_list ap; - int argarray[MAXARGS+3]; - int argnum = 3; - int retval; - int *intp; - unsigned long flags; - - if (!call_firmware) - return -1; - if ((numargs + numres) > MAXARGS) - return -1; /* spit out an error? */ - - argarray[0] = (int) name; - argarray[1] = numargs; - argarray[2] = numres; - - va_start(ap, numres); - while (numargs) { - argarray[argnum++] = va_arg(ap, int); - numargs--; - } - - spin_lock_irqsave(&prom_lock, flags); - retval = call_firmware(argarray); - spin_unlock_irqrestore(&prom_lock, flags); - - if (retval == 0) { - while (numres) { - intp = va_arg(ap, int *); - *intp = argarray[argnum++]; - numres--; - } - } - va_end(ap); - return retval; -} -EXPORT_SYMBOL(ofw); diff --git a/target/linux/olpc/files/arch/i386/kernel/olpc-pm.c b/target/linux/olpc/files/arch/i386/kernel/olpc-pm.c deleted file mode 100644 index 93149f1c38..0000000000 --- a/target/linux/olpc/files/arch/i386/kernel/olpc-pm.c +++ /dev/null @@ -1,785 +0,0 @@ -/* olpc-pm.c - * © 2006 Red Hat, Inc. - * Portions also copyright 2006 Advanced Micro Devices, Inc. - * GPLv2 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* A few words about accessing the ACPI and PM registers. Long story short, - byte and word accesses of the ACPI and PM registers is broken. The only - way to do it really correctly is to use dword accesses, which we do - throughout this code. For more details, please consult Eratta 17 and 18 - here: - - http://www.amd.com/files/connectivitysolutions/geode/geode_gx/34472D_CS5536_B1_specupdate.pdf -*/ - -#define PM_IRQ 3 - -#define CS5536_PM_PWRBTN (1 << 8) -#define CS5536_PM_RTC (1 << 10) - -#define GPIO_WAKEUP_EC (1 << 31) -#define GPIO_WAKEUP_LID (1 << 30) - -#define PM_MODE_NORMAL 0 -#define PM_MODE_TEST 1 -#define PM_MODE_MAX 2 - -/* These, and the battery EC commands, should be in an olpc.h. */ -#define EC_WRITE_SCI_MASK 0x1b -#define EC_READ_SCI_MASK 0x1c - -extern void do_olpc_suspend_lowlevel(void); - -static struct { - unsigned long address; - unsigned short segment; -} ofw_bios_entry = { 0, __KERNEL_CS }; - -static int olpc_pm_mode = PM_MODE_NORMAL; -static unsigned long acpi_base; -static unsigned long pms_base; -static int sci_irq; -static int olpc_lid_flag; - -static struct input_dev *pm_inputdev; -static struct input_dev *lid_inputdev; -static struct input_dev *ebook_inputdev; -static struct pm_ops olpc_pm_ops; - -static int gpio_wake_events = 0; -static int ebook_state = -1; -static u16 olpc_wakeup_mask = 0; - -struct platform_device olpc_powerbutton_dev = { - .name = "powerbutton", - .id = -1, -}; - -struct platform_device olpc_lid_dev = { - .name = "lid", - .id = -1, -}; - -static void __init init_ebook_state(void) -{ - if (olpc_ec_cmd(0x2a, NULL, 0, (unsigned char *) &ebook_state, 1)) { - printk(KERN_WARNING "olpc-pm: failed to get EBOOK state!\n"); - ebook_state = 0; - } - ebook_state &= 1; - - /* the input layer needs to know what value to default to as well */ - input_report_switch(ebook_inputdev, SW_TABLET_MODE, ebook_state); - input_sync(ebook_inputdev); -} - -static void (*battery_callback)(unsigned long); -static DEFINE_SPINLOCK(battery_callback_lock); - -/* propagate_events is non-NULL if run from workqueue, - NULL when called at init time to flush SCI queue */ -static void process_sci_queue(struct work_struct *propagate_events) -{ - unsigned char data = 0; - unsigned char battery_events = 0; - int ret; - - do { - ret = olpc_ec_cmd(0x84, NULL, 0, &data, 1); - if (!ret) { - printk(KERN_DEBUG "olpc-pm: SCI 0x%x received\n", - data); - - switch (data) { - case EC_SCI_SRC_EMPTY: - case EC_SCI_SRC_GAME: - case EC_SCI_SRC_WLAN: - /* we ignore these for now */ - break; - case EC_SCI_SRC_BATERR: - printk(KERN_ERR "olpc-pm: Battery Management System detected an error! Remove turnip from battery slot.\n"); - case EC_SCI_SRC_BATSOC: - case EC_SCI_SRC_BATTERY: - case EC_SCI_SRC_ACPWR: - battery_events |= data; - break; - case EC_SCI_SRC_EBOOK: - ebook_state = !ebook_state; - if (propagate_events) { - input_report_switch(ebook_inputdev, - SW_TABLET_MODE, ebook_state); - input_sync(ebook_inputdev); - } - break; - default: - printk(KERN_ERR "olpc-pm: Unknown SCI event 0x%x occurred!\n", data); - } - } - } while (data && !ret); - - if (battery_events && battery_callback && propagate_events) { - void (*cbk)(unsigned long); - - /* Older EC versions didn't distinguish between AC and battery - events */ - if (olpc_platform_info.ecver < 0x45) - battery_events = EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR; - - spin_lock(&battery_callback_lock); - cbk = battery_callback; - spin_unlock(&battery_callback_lock); - - cbk(battery_events); - } - - if (ret) - printk(KERN_WARNING "Failed to clear SCI queue!\n"); -} - -static DECLARE_WORK(sci_work, process_sci_queue); - -void olpc_register_battery_callback(void (*f)(unsigned long)) -{ - spin_lock(&battery_callback_lock); - battery_callback = f; - spin_unlock(&battery_callback_lock); -} -EXPORT_SYMBOL_GPL(olpc_register_battery_callback); - -void olpc_deregister_battery_callback(void) -{ - spin_lock(&battery_callback_lock); - battery_callback = NULL; - spin_unlock(&battery_callback_lock); - cancel_work_sync(&sci_work); -} -EXPORT_SYMBOL_GPL(olpc_deregister_battery_callback); - - -static int olpc_pm_interrupt(int irq, void *id) -{ - uint32_t sts, gpe = 0; - - sts = inl(acpi_base + PM1_STS); - outl(sts | 0xFFFF, acpi_base + PM1_STS); - - if (olpc_get_rev() >= OLPC_REV_B2) { - gpe = inl(acpi_base + PM_GPE0_STS); - outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS); - } - - if (sts & CS5536_PM_PWRBTN) { - input_report_key(pm_inputdev, KEY_POWER, 1); - input_sync(pm_inputdev); - printk(KERN_DEBUG "olpm-pm: PM_PWRBTN event received\n"); - /* Do we need to delay this (and hence schedule_work)? */ - input_report_key(pm_inputdev, KEY_POWER, 0); - input_sync(pm_inputdev); - } - - if (gpe & GPIO_WAKEUP_EC) { - geode_gpio_clear(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS); - schedule_work(&sci_work); - } - - if (gpe & GPIO_WAKEUP_LID) { - /* Disable events */ - geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); - - /* Clear the edge */ - - if (olpc_lid_flag) - geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); - else - geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); - - /* Clear the status too */ - geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); - geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); - - /* The line is high when the LID is open, but SW_LID - * should be high when the LID is closed, so we pass the old - * value of olpc_lid_flag - */ - - input_report_switch(lid_inputdev, SW_LID, olpc_lid_flag); - input_sync(lid_inputdev); - - /* Swap the status */ - olpc_lid_flag = !olpc_lid_flag; - - if (olpc_lid_flag) - geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); - else - geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); - - /* re-enable the event */ - geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); - } - - return IRQ_HANDLED; -} - -/* - * For now, only support STR. We also don't support suspending on - * B1s, due to difficulties with the cafe FPGA. - */ -static int olpc_pm_state_valid(suspend_state_t pm_state) -{ - if (pm_state == PM_SUSPEND_MEM && olpc_rev_after(OLPC_REV_B1)) - return 1; - - return 0; -} - -/* This is a catchall function for operations that just don't belong - * anywhere else. Later we will evaluate if these belong in the - * individual device drivers or the firmware. - * If you add something to this function, please explain yourself with - * a comment. - */ - -extern void gxfb_flatpanel_control(int state); - -static u32 gpio_wakeup[2]; -static u64 irq_sources[4]; -static u64 mfgpt_irq_msr, mfgpt_nr_msr; - -void olpc_fixup_wakeup(void) -{ - u32 base = geode_gpio_base(); - int i; - - /* This clears any pending events from the status register - - * the firmware also does this, but its possible that it tries - * it too early before the key has a chance to debounce - */ - - outl((CS5536_PM_PWRBTN << 16) | 0xFFFF, acpi_base + PM1_STS); - - /* Enable the flatpanel sequencing as early as possible, because - it takes ~64ms to resume. This probably belongs in the firmware */ - - //gxfb_flatpanel_control(1); - - /* Restore the interrupt sources */ - wrmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]); - wrmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]); - wrmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]); - wrmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]); - - /* Restore the X and Y sources for GPIO */ - outl(gpio_wakeup[0], base + GPIO_MAP_X); - outl(gpio_wakeup[1], base + GPIO_MAP_Y); - - /* Resture the MFGPT MSRs */ - wrmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr); - wrmsrl(MFGPT_NR_MSR, mfgpt_nr_msr); - - for (i=0;i<2;i++) { - /* tell the wireless module to restart USB communication */ - olpc_ec_cmd(0x24, NULL, 0, NULL, 0); - } -} - -void olpc_fixup_sleep(void) -{ - u32 base = geode_gpio_base(); - int i; - - /* Save the X and Y sources for GPIO */ - gpio_wakeup[0] = inl(base + GPIO_MAP_X); - gpio_wakeup[1] = inl(base + GPIO_MAP_Y); - - /* Save the Y and Z unrestricted sources */ - - rdmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]); - rdmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]); - rdmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]); - rdmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]); - - /* Turn off the MFGPT timers on the way down */ - - for(i = 0; i < 8; i++) { - u32 val = geode_mfgpt_read(i, MFGPT_REG_SETUP); - - if (val & MFGPT_SETUP_SETUP) { - val &= ~MFGPT_SETUP_CNTEN; - geode_mfgpt_write(i, MFGPT_REG_SETUP, val); - } - } - - /* Save the MFGPT MSRs */ - rdmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr); - rdmsrl(MFGPT_NR_MSR, mfgpt_nr_msr); - - if (device_may_wakeup(&olpc_powerbutton_dev.dev)) - olpc_wakeup_mask |= CS5536_PM_PWRBTN; - else - olpc_wakeup_mask &= ~(CS5536_PM_PWRBTN); - - if (device_may_wakeup(&olpc_lid_dev.dev)) { - geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); - gpio_wake_events |= GPIO_WAKEUP_LID; - } else { - geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); - gpio_wake_events &= ~(GPIO_WAKEUP_LID); - } -} - -static int olpc_pm_enter(suspend_state_t pm_state) -{ - /* Only STR is supported */ - if (pm_state != PM_SUSPEND_MEM) - return -EINVAL; - - olpc_fixup_sleep(); - - /* Set the GPIO wakeup bits */ - outl(gpio_wake_events, acpi_base + PM_GPE0_EN); - outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS); - - /* Save CPU state */ - do_olpc_suspend_lowlevel(); - - olpc_fixup_wakeup(); - - /* Restore the SCI wakeup events */ - outl(gpio_wake_events, acpi_base + PM_GPE0_EN); - - return 0; -} - -int asmlinkage olpc_do_sleep(u8 sleep_state) -{ - void *pgd_addr = __va(read_cr3()); - printk(KERN_ERR "olpc_do_sleep!\n"); /* this needs to remain here so - * that gcc doesn't optimize - * away our __va! */ - /* FIXME: Set the SCI bits we want to wake up on here */ - - /* FIXME: Set any other SCI events that we might want here */ - - outl((olpc_wakeup_mask << 16) | 0xFFFF, acpi_base + PM1_STS); - - /* If we are in test mode, then just return (simulate a successful - suspend/resume). Otherwise, if we are doing the real thing, - then go for the gusto */ - - if (olpc_pm_mode != PM_MODE_TEST) { - __asm__ __volatile__("movl %0,%%eax" : : "r" (pgd_addr)); - __asm__("call *(%%edi); cld" - : : "D" (&ofw_bios_entry)); - } - - return 0; -} - -/* This code will slowly disappear as we fixup the issues in the BIOS */ - -static void __init olpc_fixup_bios(void) -{ - unsigned long hi, lo; - - if (olpc_has_vsa()) { - /* The VSA aggressively sets up the ACPI and PM register for - * trapping - its not enough to force these values in the BIOS - - * they seem to be changed during PCI init as well. - */ - - /* Change the PM registers to decode to the DD */ - - rdmsr(0x510100e2, lo, hi); - hi |= 0x80000000; - wrmsr(0x510100e2, lo, hi); - - /* Change the ACPI registers to decode to the DD */ - - rdmsr(0x510100e3, lo, hi); - hi |= 0x80000000; - wrmsr(0x510100e3, lo, hi); - } - - /* GPIO24 controls WORK_AUX */ - - geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_ENABLE); - geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_AUX1); - - if (olpc_get_rev() >= OLPC_REV_B2) { - /* GPIO10 is connected to the thermal alarm */ - geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_ENABLE); - geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_AUX1); - - /* Set up to get LID events */ - geode_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_ENABLE); - - /* Clear edge detection and event enable for now */ - geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); - geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); - geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); - - geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); - geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); - - /* Set the LID to cause an PME event on group 6 */ - geode_gpio_event_pme(OLPC_GPIO_LID, 6); - - /* Set PME group 6 to fire the SCI interrupt */ - geode_gpio_set_irq(6, sci_irq); - } - - geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_INPUT_ENABLE); - - /* Clear pending events */ - - geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS); - geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS); - - //geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_EN); - geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE); - - /* Set the SCI to cause a PME event on group 7 */ - geode_gpio_event_pme(OLPC_GPIO_ECSCI, 7); - - /* And have group 6 also fire the SCI interrupt */ - geode_gpio_set_irq(7, sci_irq); -} - -/* This provides a control file for setting up testing of the - power management system. For now, there is just one setting: - "test" which means that we don't actually enter the power - off routine. -*/ - -static const char * const pm_states[] = { - [PM_MODE_NORMAL] = "normal", - [PM_MODE_TEST] = "test", -}; - -extern struct mutex pm_mutex; -extern struct kset power_subsys; - -static ssize_t control_show(struct kset *s, char *buf) -{ - return sprintf(buf, "%s\n", pm_states[olpc_pm_mode]); -} - -static ssize_t control_store(struct kset *s, const char *buf, size_t n) -{ - int i, len; - char *p; - - p = memchr(buf, '\n', n); - len = p ? p - buf : n; - - /* Grab the mutex */ - mutex_lock(&pm_mutex); - - for(i = 0; i < PM_MODE_MAX; i++) { - if (!strncmp(buf, pm_states[i], len)) { - olpc_pm_mode = i; - break; - } - } - - mutex_unlock(&pm_mutex); - - return (i == PM_MODE_MAX) ? -EINVAL : n; -} - -static struct subsys_attribute control_attr = { - .attr = { - .name = "olpc-pm", - .mode = 0644, - }, - .show = control_show, - .store = control_store, -}; - -static struct attribute * olpc_attributes[] = { - &control_attr.attr, - NULL -}; - -static struct attribute_group olpc_attrs = { - .attrs = olpc_attributes, -}; - -static int __init alloc_inputdevs(void) -{ - int ret = -ENOMEM; - - pm_inputdev = input_allocate_device(); - if (!pm_inputdev) - goto err; - - pm_inputdev->name = "OLPC PM"; - pm_inputdev->phys = "olpc_pm/input0"; - set_bit(EV_KEY, pm_inputdev->evbit); - set_bit(KEY_POWER, pm_inputdev->keybit); - - ret = input_register_device(pm_inputdev); - if (ret) { - printk(KERN_ERR "olpc-pm: failed to register PM input device: %d\n", ret); - goto err; - } - - lid_inputdev = input_allocate_device(); - if (!lid_inputdev) - goto err; - - lid_inputdev->name = "OLPC lid switch"; - lid_inputdev->phys = "olpc_pm/input1"; - set_bit(EV_SW, lid_inputdev->evbit); - set_bit(SW_LID, lid_inputdev->swbit); - - ret = input_register_device(lid_inputdev); - if (ret) { - printk(KERN_ERR "olpc-pm: failed to register lid input device: %d\n", ret); - goto err; - } - - ebook_inputdev = input_allocate_device(); - if (!ebook_inputdev) - goto err; - - ebook_inputdev->name = "OLPC ebook switch"; - ebook_inputdev->phys = "olpc_pm/input2"; - set_bit(EV_SW, ebook_inputdev->evbit); - set_bit(SW_TABLET_MODE, ebook_inputdev->swbit); - - ret = input_register_device(ebook_inputdev); - if (ret) { - printk(KERN_ERR "olpc-pm: failed to register ebook input device: %d\n", ret); - goto err; - } - - return ret; -err: - if (ebook_inputdev) { - input_unregister_device(ebook_inputdev); - ebook_inputdev = NULL; - } - if (lid_inputdev) { - input_unregister_device(lid_inputdev); - lid_inputdev = NULL; - } - if (pm_inputdev) { - input_unregister_device(pm_inputdev); - pm_inputdev = NULL; - } - - return ret; -} - -static int __init olpc_pm_init(void) -{ - uint32_t lo, hi; - int ret; - uint8_t ec_byte; - - if (!machine_is_olpc()) - return -ENODEV; - - acpi_base = geode_acpi_base(); - pms_base = geode_pms_base(); - - if (!acpi_base || !pms_base) - return -ENODEV; - - ret = alloc_inputdevs(); - if (ret) - return ret; - - rdmsr(0x51400020, lo, hi); - sci_irq = (lo >> 20) & 15; - - if (sci_irq) { - printk(KERN_INFO "SCI is mapped to IRQ %d\n", sci_irq); - } else { - /* Zero doesn't mean zero -- it means masked */ - printk(KERN_INFO "SCI unmapped. Mapping to IRQ 3\n"); - sci_irq = 3; - lo |= 0x00300000; - wrmsrl(0x51400020, lo); - } - - olpc_fixup_bios(); - - lo = inl(pms_base + PM_FSD); - - /* Lock, enable failsafe, 4 seconds */ - outl(0xc001f400, pms_base + PM_FSD); - - /* Here we set up the SCI events we're interested in during - * real-time. We have no sleep button, and the RTC doesn't make - * sense, so set up the power button - */ - - outl(inl(acpi_base) | ((CS5536_PM_PWRBTN) << 16), acpi_base); - - if (olpc_get_rev() >= OLPC_REV_B2) { - gpio_wake_events |= GPIO_WAKEUP_LID; - - /* Get the current value of the GPIO, and set up the edges */ - olpc_lid_flag = geode_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK); - - /* Watch for the opposite edge */ - - if (olpc_lid_flag) - geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); - else - geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); - - /* Enable the event */ - geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); - } - - /* Set up the mask for wakeups the EC will generate SCIs on */ - - ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &ec_byte, 1); - if (ret) - printk(KERN_ERR "Error getting the EC SCI mask: %d\n", ret); - - /* Disable battery 1% charge wakeups */ - ec_byte &= ~EC_SCI_SRC_BATSOC; - - ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &ec_byte, 1, NULL, 0); - if (ret) - printk(KERN_ERR "Error setting the EC SCI mask: %d\n", ret); - - /* Set up the EC SCI */ - - gpio_wake_events |= GPIO_WAKEUP_EC; - - outl(gpio_wake_events, acpi_base + PM_GPE0_EN); - outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS); - - /* Select level triggered in PIC */ - - if (sci_irq < 8) { - lo = inb(0x4d0); - lo |= 1 << sci_irq; - outb(lo, 0x4d0); - } else { - lo = inb(0x4d1); - lo |= 1 << (sci_irq - 8); - outb(lo, 0x4d1); - } - /* Clear pending interrupt */ - outl(inl(acpi_base) | 0xFFFF, acpi_base); - process_sci_queue(0); /* we just want to flush the queue here */ - init_ebook_state(); - - /* Enable the interrupt */ - - ret = request_irq(sci_irq, &olpc_pm_interrupt, 0, "SCI", &acpi_base); - - if (ret) { - printk(KERN_ERR "Error registering SCI: %d\n", ret); - return ret; - } - - ofw_bios_entry.address = 0xF0000 + PAGE_OFFSET; - pm_set_ops(&olpc_pm_ops); - - sysfs_create_group(&power_subsys.kobj, &olpc_attrs); - - return 0; -} - - -#if defined (CONFIG_RTC_DRV_CMOS) || defined (CONFIG_RTC_DRV_CMOS_MODULE) -struct resource rtc_platform_resource[2] = { - { - .flags = IORESOURCE_IO, - .start = RTC_PORT(0), - .end = RTC_PORT(0) + RTC_IO_EXTENT - }, - { - .flags = IORESOURCE_IRQ, - .start = 8, - .end = 8, - }, -}; - - -static void rtc_wake_on(struct device *dev) -{ - olpc_wakeup_mask |= CS5536_PM_RTC; -} - -static void rtc_wake_off(struct device *dev) -{ - olpc_wakeup_mask &= ~(CS5536_PM_RTC); -} - -static struct cmos_rtc_board_info rtc_info = { - .rtc_day_alarm = 0, - .rtc_mon_alarm = 0, - .rtc_century = 0, - .wake_on = rtc_wake_on, - .wake_off = rtc_wake_off, -}; - -struct platform_device olpc_rtc_device = { - .name = "rtc_cmos", - .id = -1, - .num_resources = ARRAY_SIZE(rtc_platform_resource), - .dev.platform_data = &rtc_info, - .resource = rtc_platform_resource, -}; - -static int __init olpc_platform_init(void) -{ - (void)platform_device_register(&olpc_rtc_device); - device_init_wakeup(&olpc_rtc_device.dev, 1); - - (void)platform_device_register(&olpc_powerbutton_dev); - device_init_wakeup(&olpc_powerbutton_dev.dev, 1); - - (void)platform_device_register(&olpc_lid_dev); - device_init_wakeup(&olpc_lid_dev.dev, 1); - - return 0; -} -arch_initcall(olpc_platform_init); -#endif /* CONFIG_RTC_DRV_CMOS */ - -static void olpc_pm_exit(void) -{ - /* Clear any pending events, and disable them */ - outl(0xFFFF, acpi_base+2); - - free_irq(sci_irq, &acpi_base); - input_unregister_device(pm_inputdev); - input_unregister_device(lid_inputdev); - input_unregister_device(ebook_inputdev); -} - -static struct pm_ops olpc_pm_ops = { - .valid = olpc_pm_state_valid, - .enter = olpc_pm_enter, -}; - -module_init(olpc_pm_init); -module_exit(olpc_pm_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("David Woodhouse "); -MODULE_DESCRIPTION("AMD Geode power management for OLPC CL1"); diff --git a/target/linux/olpc/files/arch/i386/kernel/olpc-sleep.S b/target/linux/olpc/files/arch/i386/kernel/olpc-sleep.S deleted file mode 100644 index 9535c9a941..0000000000 --- a/target/linux/olpc/files/arch/i386/kernel/olpc-sleep.S +++ /dev/null @@ -1,39 +0,0 @@ -.text - -ENTRY(olpc_sleep_asm) -olpc_sleep: - ;; Get the value of PM1_CNT and store it off - - add 08h, ax - mov bx,dx - in dx,eax - or 2000h, ax - mov ax,di - - ;; flush the cache - wbinvd - - ;; GX2 must disable refresh before going into self-refresh - mov 2000000180xh, ecx - rdmsr - mov eax, esi - and 0FF0000FFh, eax - wrmsr - - ;; Now, put the memory into self refresh - mov 2004, cx - xor edx, edx - xor eax, eax - mov 04h, al - wrmsr - - ;; Thats all she wrote - time to go to sleep - - mov bx, dx - movzx di, eax - out eax, dx - - ;; - - - diff --git a/target/linux/olpc/files/arch/i386/kernel/olpc-wakeup.S b/target/linux/olpc/files/arch/i386/kernel/olpc-wakeup.S deleted file mode 100644 index a92cc61e24..0000000000 --- a/target/linux/olpc/files/arch/i386/kernel/olpc-wakeup.S +++ /dev/null @@ -1,122 +0,0 @@ -.text -#include -#include -#include - -ALIGN - .align 4096 - -wakeup_start: -# jmp wakeup_start - - cli - cld - - # Clear any dangerous flags - - pushl $0 - popfl - - # Set up %cr3 - movl $swsusp_pg_dir - __PAGE_OFFSET, %eax - movl %eax, %cr3 - - movl saved_cr4, %eax - movl %eax, %cr4 - - movl saved_cr0, %eax - movl %eax, %cr0 - - jmp 1f -1: - ljmpl $__KERNEL_CS,$wakeup_return - - -.org 0x1000 - -wakeup_return: - movw $__KERNEL_DS, %ax - movw %ax, %ss - movw %ax, %ds - movw %ax, %es - movw %ax, %fs - movw %ax, %gs - - lgdt saved_gdt - lidt saved_idt - lldt saved_ldt - ljmp $(__KERNEL_CS),$1f -1: - movl %cr3, %eax - movl %eax, %cr3 - wbinvd - - # Go back to the return point - jmp ret_point - -save_registers: - sgdt saved_gdt - sidt saved_idt - sldt saved_ldt - - pushl %edx - movl %cr4, %edx - movl %edx, saved_cr4 - - movl %cr0, %edx - movl %edx, saved_cr0 - - popl %edx - - - movl %ebx, saved_context_ebx - movl %ebp, saved_context_ebp - movl %esi, saved_context_esi - movl %edi, saved_context_edi - - pushfl - popl saved_context_eflags - - ret - - -restore_registers: - movl saved_context_ebp, %ebp - movl saved_context_ebx, %ebx - movl saved_context_esi, %esi - movl saved_context_edi, %edi - - pushl saved_context_eflags - popfl - - ret - - -ENTRY(do_olpc_suspend_lowlevel) - call save_processor_state - call save_registers - - # This is the stack context we want to remember - movl %esp, saved_context_esp - - pushl $3 - call olpc_do_sleep - - jmp wakeup_start - .p2align 4,,7 -ret_point: - movl saved_context_esp, %esp - - call restore_registers - call restore_processor_state - ret - -.data -ALIGN - -saved_gdt: .long 0,0 -saved_idt: .long 0,0 -saved_ldt: .long 0 -saved_cr4: .long 0 -saved_cr0: .long 0 - diff --git a/target/linux/olpc/files/arch/i386/kernel/olpc.c b/target/linux/olpc/files/arch/i386/kernel/olpc.c deleted file mode 100644 index d540cb0eae..0000000000 --- a/target/linux/olpc/files/arch/i386/kernel/olpc.c +++ /dev/null @@ -1,320 +0,0 @@ -/* Support for the OLPC DCON and OLPC EC access - * Copyright (C) 2006, Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -/* This is our new multi-purpose structure used to contain the - * information about the platform that we detect - */ - -struct olpc_platform_t olpc_platform_info; -EXPORT_SYMBOL_GPL(olpc_platform_info); - -/********************************************************************* - * EC locking and access - *********************************************************************/ - -static DEFINE_SPINLOCK(ec_lock); - -/* what the timeout *should* be (in ms) */ -#define EC_BASE_TIMEOUT 20 - -/* the timeout that bugs in the EC might force us to actually use */ -static int ec_timeout = EC_BASE_TIMEOUT; - -static int __init olpc_ec_timeout_set(char *str) -{ - if (get_option(&str, &ec_timeout) != 1) { - ec_timeout = EC_BASE_TIMEOUT; - printk(KERN_ERR "olpc-ec: invalid argument to " - "'olpc_ec_timeout=', ignoring!\n"); - } - printk(KERN_DEBUG "olpc-ec: using %d ms delay for EC commands.\n", - ec_timeout); - return 1; -} -__setup("olpc_ec_timeout=", olpc_ec_timeout_set); - -/* - * These *bf_status functions return whether the buffers are full or not. - */ - -static inline unsigned int ibf_status(unsigned int port) -{ - return inb(port) & 0x02; -} - -static inline unsigned int obf_status(unsigned int port) -{ - return inb(port) & 0x01; -} - -#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d)) -static int __wait_on_ibf(unsigned int line, unsigned int port, int desired) -{ - unsigned int timeo; - int state = ibf_status(port); - - for (timeo = ec_timeout; state != desired && timeo; timeo--) { - mdelay(1); - state = ibf_status(port); - } - - if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) && - timeo < (ec_timeout - EC_BASE_TIMEOUT)) { - printk(KERN_WARNING "olpc-ec: waited %u ms for IBF (%d)!\n", - EC_BASE_TIMEOUT-timeo, line); - } - - return !(state == desired); -} - -#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d)) -static int __wait_on_obf(unsigned int line, unsigned int port, int desired) -{ - unsigned int timeo; - int state = obf_status(port); - - for (timeo = ec_timeout; state != desired && timeo; timeo--) { - mdelay(1); - state = obf_status(port); - } - - if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) && - timeo < (ec_timeout - EC_BASE_TIMEOUT)) { - printk(KERN_WARNING "olpc-ec: waited %u ms for OBF (%d)!\n", - EC_BASE_TIMEOUT-timeo, line); - } - - return !(state == desired); -} - -int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, - unsigned char *outbuf, size_t outlen) -{ - unsigned long flags; - int ret = -EIO; - int i; - - spin_lock_irqsave(&ec_lock, flags); - - if (wait_on_ibf(0x6c, 0)) { - printk(KERN_ERR "olpc-ec: timeout waiting for EC to " - "quiesce!\n"); - goto err; - } - -restart: - /* - * Note that if we time out during any IBF checks, that's a failure; - * we have to return. There's no way for the kernel to clear that. - * - * If we time out during an OBF check, we can restart the command; - * reissuing it will clear the OBF flag, and we should be alright. - * The OBF flag will sometimes misbehave due to what we believe - * is a hardware quirk.. - */ - printk(KERN_DEBUG "olpc-ec: running cmd 0x%x\n", cmd); - outb(cmd, 0x6c); - - if (wait_on_ibf(0x6c, 0)) { - printk(KERN_ERR "olpc-ec: timeout waiting for EC to read " - "command!\n"); - goto err; - } - - if (inbuf && inlen) { - /* write data to EC */ - for (i = 0; i < inlen; i++) { - if (wait_on_ibf(0x6c, 0)) { - printk(KERN_ERR "olpc-ec: timeout waiting for" - " EC accept data!\n"); - goto err; - } - printk(KERN_DEBUG "olpc-ec: sending cmd arg 0x%x\n", - inbuf[i]); - outb(inbuf[i], 0x68); - } - } - if (outbuf && outlen) { - /* read data from EC */ - for (i = 0; i < outlen; i++) { - if (wait_on_obf(0x6c, 1)) { - printk(KERN_ERR "olpc-ec: timeout waiting for" - " EC to provide data!\n"); - goto restart; - } - outbuf[i] = inb(0x68); - printk(KERN_DEBUG "olpc-ec: received 0x%x\n", - outbuf[i]); - } - } - - ret = 0; -err: - spin_unlock_irqrestore(&ec_lock, flags); - return ret; -} -EXPORT_SYMBOL_GPL(olpc_ec_cmd); - -/********************************************************************* - * DCON stuff - *********************************************************************/ - -static void olpc_power_off(void) -{ - printk(KERN_INFO "OLPC power off sequence...\n"); - outb(0xff, 0x381); - outb(0x14, 0x382); - outb(0x01, 0x383); - outb(0xff, 0x381); - outb(0x14, 0x382); - outb(0x00, 0x383); -} - -static void __init -ec_detect(void) -{ - olpc_ec_cmd(0x08, NULL, 0, (unsigned char *) &olpc_platform_info.ecver, 1); -} - -/* Check to see if this version of the OLPC board has VSA built - * in, and set a flag - */ - -static void __init vsa_detect(void) -{ - u16 rev; - - outw(0xFC53, 0xAC1C); - outw(0x0003, 0xAC1C); - - rev = inw(0xAC1E); - - if (rev == 0x4132) - olpc_platform_info.flags |= OLPC_F_VSA; -} - -/* Map OFW revisions to what OLPC_REV_* */ -static const char __initdata *olpc_boardrev_str[] = { - "A1", - "preB1", - "B1", - "preB2", - "B2", - "preB3", - "B3", - "B4", - "C1", - "R1", -}; - -static void __init platform_detect(char *revision, size_t len) -{ - size_t propsize; - int i; - - BUG_ON(ARRAY_SIZE(olpc_boardrev_str) != OLPC_REV_UNKNOWN); - - if (ofw("getprop", 4, 1, NULL, "model", revision, len, &propsize)) { - printk(KERN_ERR "ofw: getprop call failed!\n"); - goto failed; - } - if (len < propsize) { - printk(KERN_ERR "ofw: revision string is too long!\n"); - goto failed; - } - - for (i=0; i < ARRAY_SIZE(olpc_boardrev_str); i++) { - if (strcmp(revision, olpc_boardrev_str[i]) == 0) { - olpc_platform_info.boardrev = i; - return; - } - } - -failed: - strncpy(revision, "Unknown", len); - olpc_platform_info.boardrev = OLPC_REV_UNKNOWN; -} - -static int olpc_dcon_present = -1; -module_param(olpc_dcon_present, int, 0444); - -/* REV_A CMOS map: - * bit 440; DCON present bit - */ - -#define OLPC_CMOS_DCON_OFFSET (440 / 8) -#define OLPC_CMOS_DCON_MASK 0x01 - -static int __init olpc_init(void) -{ - unsigned char *romsig; - char revision[10]; - - spin_lock_init(&ec_lock); - - romsig = ioremap(0xffffffc0, 16); - - if (!romsig) - return 0; - - if (strncmp(romsig, "CL1 Q", 7)) - goto unmap; - if (strncmp(romsig+6, romsig+13, 3)) { - printk(KERN_INFO "OLPC BIOS signature looks invalid. Assuming not OLPC\n"); - goto unmap; - } - printk(KERN_INFO "OLPC board with OpenFirmware: %.16s\n", romsig); - - olpc_platform_info.flags |= OLPC_F_PRESENT; - - pm_power_off = olpc_power_off; - - /* Get the platform revision */ - platform_detect(revision, sizeof(revision)); - - /* If olpc_dcon_present isn't set by the command line, then - * "detect" it - */ - - if (olpc_dcon_present == -1) { - /* B1 and greater always has a DCON */ - if (olpc_platform_info.boardrev >= OLPC_REV_B1 && - olpc_platform_info.boardrev < OLPC_REV_UNKNOWN) - olpc_dcon_present = 1; - } - - if (olpc_dcon_present) - olpc_platform_info.flags |= OLPC_F_DCON; - - /* Get the EC revision */ - ec_detect(); - - /* Check to see if the VSA exists */ - vsa_detect(); - - printk(KERN_INFO "OLPC board revision: %s (EC=%x)\n", revision, - olpc_platform_info.ecver); - - unmap: - iounmap(romsig); - - return 0; -} - -postcore_initcall(olpc_init); diff --git a/target/linux/olpc/files/arch/i386/kernel/prom.c b/target/linux/olpc/files/arch/i386/kernel/prom.c deleted file mode 100644 index d64bb276f2..0000000000 --- a/target/linux/olpc/files/arch/i386/kernel/prom.c +++ /dev/null @@ -1,478 +0,0 @@ -/* - * Procedures for creating, accessing and interpreting the device tree. - * - * Paul Mackerras August 1996. - * Copyright (C) 1996-2005 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. - * {engebret|bergner}@us.ibm.com - * - * Adapted for sparc64 by David S. Miller davem@davemloft.net - * - * Adapter for i386/OLPC by Andres Salomon - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * XXX: This is very much a stub; right now we're keeping 2 device trees - * in memory (one for promfs, and one here). That will not remain - * for long! - */ - -static struct device_node *allnodes; - -/* use when traversing tree through the allnext, child, sibling, - * or parent members of struct device_node. - */ -static DEFINE_RWLOCK(devtree_lock); - -int of_device_is_compatible(const struct device_node *device, - const char *compat) -{ - const char* cp; - int cplen, l; - - cp = of_get_property(device, "compatible", &cplen); - if (cp == NULL) - return 0; - while (cplen > 0) { - if (strncmp(cp, compat, strlen(compat)) == 0) - return 1; - l = strlen(cp) + 1; - cp += l; - cplen -= l; - } - - return 0; -} -EXPORT_SYMBOL(of_device_is_compatible); - -struct device_node *of_get_parent(const struct device_node *node) -{ - struct device_node *np; - - if (!node) - return NULL; - - np = node->parent; - - return np; -} -EXPORT_SYMBOL(of_get_parent); - -struct device_node *of_get_next_child(const struct device_node *node, - struct device_node *prev) -{ - struct device_node *next; - - next = prev ? prev->sibling : node->child; - for (; next != 0; next = next->sibling) { - break; - } - - return next; -} -EXPORT_SYMBOL(of_get_next_child); - -struct device_node *of_find_node_by_path(const char *path) -{ - struct device_node *np = allnodes; - - for (; np != 0; np = np->allnext) { - if (np->full_name != 0 && strcmp(np->full_name, path) == 0) - break; - } - - return np; -} -EXPORT_SYMBOL(of_find_node_by_path); - -struct device_node *of_find_node_by_phandle(phandle handle) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->node == handle) - break; - - return np; -} -EXPORT_SYMBOL(of_find_node_by_phandle); - -struct device_node *of_find_node_by_name(struct device_node *from, - const char *name) -{ - struct device_node *np; - - np = from ? from->allnext : allnodes; - for (; np != NULL; np = np->allnext) - if (np->name != NULL && strcmp(np->name, name) == 0) - break; - - return np; -} -EXPORT_SYMBOL(of_find_node_by_name); - -struct device_node *of_find_node_by_type(struct device_node *from, - const char *type) -{ - struct device_node *np; - - np = from ? from->allnext : allnodes; - for (; np != 0; np = np->allnext) - if (np->type != 0 && strcmp(np->type, type) == 0) - break; - - return np; -} -EXPORT_SYMBOL(of_find_node_by_type); - -struct device_node *of_find_compatible_node(struct device_node *from, - const char *type, const char *compatible) -{ - struct device_node *np; - - np = from ? from->allnext : allnodes; - for (; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcmp(np->type, type) == 0)) - continue; - if (of_device_is_compatible(np, compatible)) - break; - } - - return np; -} -EXPORT_SYMBOL(of_find_compatible_node); - -struct property *of_find_property(const struct device_node *np, - const char *name, - int *lenp) -{ - struct property *pp; - - for (pp = np->properties; pp != 0; pp = pp->next) { - if (strcasecmp(pp->name, name) == 0) { - if (lenp != 0) - *lenp = pp->length; - break; - } - } - return pp; -} -EXPORT_SYMBOL(of_find_property); - -/* - * Find a property with a given name for a given node - * and return the value. - */ -const void *of_get_property(const struct device_node *np, const char *name, - int *lenp) -{ - struct property *pp = of_find_property(np,name,lenp); - return pp ? pp->value : NULL; -} -EXPORT_SYMBOL(of_get_property); - -int of_getintprop_default(struct device_node *np, const char *name, int def) -{ - struct property *prop; - int len; - - prop = of_find_property(np, name, &len); - if (!prop || len != 4) - return def; - - return *(int *) prop->value; -} -EXPORT_SYMBOL(of_getintprop_default); - -int of_n_addr_cells(struct device_node *np) -{ - const int* ip; - do { - if (np->parent) - np = np->parent; - ip = of_get_property(np, "#address-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #address-cells property for the root node, default to 2 */ - return 2; -} -EXPORT_SYMBOL(of_n_addr_cells); - -int of_n_size_cells(struct device_node *np) -{ - const int* ip; - do { - if (np->parent) - np = np->parent; - ip = of_get_property(np, "#size-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #size-cells property for the root node, default to 1 */ - return 1; -} -EXPORT_SYMBOL(of_n_size_cells); - -int of_set_property(struct device_node *dp, const char *name, void *val, int len) -{ - return -EIO; -} -EXPORT_SYMBOL(of_set_property); - -static unsigned int prom_early_allocated; - -static void * __init prom_early_alloc(unsigned long size) -{ - void *ret; - - ret = kmalloc(size, GFP_KERNEL); - if (ret != NULL) - memset(ret, 0, size); - else - printk(KERN_ERR "ACK! couldn't allocate prom memory!\n"); - - prom_early_allocated += size; - - return ret; -} - -static int is_root_node(const struct device_node *dp) -{ - if (!dp) - return 0; - - return (dp->parent == NULL); -} - -static char * __init build_path_component(struct device_node *dp) -{ - int pathlen; - char *n, *i; - - if (ofw("package-to-path", 3, 1, dp->node, NULL, 0, &pathlen)) { - printk(KERN_ERR "PROM: unable to get path name from OFW!\n"); - return "ERROR"; - } - n = prom_early_alloc(pathlen + 1); - if (ofw("package-to-path", 3, 1, dp->node, n, pathlen+1, &pathlen)) - printk(KERN_ERR "PROM: unable to get path name from OFW\n"); - - if ((i = strrchr(n, '/'))) - n = ++i; /* we only want the file name */ - return n; -} - -static char * __init build_full_name(struct device_node *dp) -{ - int len, ourlen, plen; - char *n; - - plen = strlen(dp->parent->full_name); - ourlen = strlen(dp->path_component_name); - len = ourlen + plen + 2; - - n = prom_early_alloc(len); - strcpy(n, dp->parent->full_name); - if (!is_root_node(dp->parent)) { - strcpy(n + plen, "/"); - plen++; - } - strcpy(n + plen, dp->path_component_name); - - return n; -} - -static struct property * __init build_one_prop(phandle node, char *prev, char *special_name, void *special_val, int special_len) -{ - static struct property *tmp = NULL; - struct property *p; - - if (tmp) { - p = tmp; - memset(p, 0, sizeof(*p) + 32); - tmp = NULL; - } else { - p = prom_early_alloc(sizeof(struct property) + 32); - } - - p->name = (char *) (p + 1); - if (special_name) { - strcpy(p->name, special_name); - p->length = special_len; - p->value = prom_early_alloc(special_len); - memcpy(p->value, special_val, special_len); - } else { - int fl; - if (prev == NULL) { - if (ofw("nextprop", 3, 1, node, "", p->name, &fl)) { - printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__); - return NULL; - } - } else { - if (ofw("nextprop", 3, 1, node, prev, p->name, &fl)) { - printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__); - return NULL; - } - } - if (strlen(p->name) == 0 || fl != 1) { - tmp = p; - return NULL; - } - if (ofw("getproplen", 2, 1, node, p->name, &p->length)) { - printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__); - return NULL; - } - if (p->length <= 0) { - p->length = 0; - } else { - p->value = prom_early_alloc(p->length + 1); - if (ofw("getprop", 4, 1, node, p->name, p->value, p->length, &p->length)) { - printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__); - return NULL; - } - ((unsigned char *)p->value)[p->length] = '\0'; - } - } - return p; -} - -static struct property * __init build_prop_list(phandle node) -{ - struct property *head, *tail; - - head = tail = build_one_prop(node, NULL, - ".node", &node, sizeof(node)); - - tail->next = build_one_prop(node, NULL, NULL, NULL, 0); - tail = tail->next; - while(tail) { - tail->next = build_one_prop(node, tail->name, - NULL, NULL, 0); - tail = tail->next; - } - - return head; -} - -static char * __init get_one_property(phandle node, const char *name) -{ - char *buf = ""; - int len; - - if (ofw("getproplen", 2, 1, node, name, &len)) { - printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__); - return NULL; - } - if (len > 0) { - buf = prom_early_alloc(len); - if (ofw("getprop", 4, 1, node, name, buf, len, &len)) { - printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__); - return NULL; - } - } - - return buf; -} - -static struct device_node * __init create_node(phandle node, struct device_node *parent) -{ - struct device_node *dp; - - if (!node) - return NULL; - - dp = prom_early_alloc(sizeof(*dp)); - dp->parent = parent; - - kref_init(&dp->kref); - - dp->name = get_one_property(node, "name"); - dp->type = get_one_property(node, "device_type"); - dp->node = node; - - dp->properties = build_prop_list(node); - - return dp; -} - -static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp) -{ - struct device_node *ret = NULL, *prev_sibling = NULL; - struct device_node *dp; - u32 child; - - while (1) { - dp = create_node(node, parent); - if (!dp) - break; - - if (prev_sibling) - prev_sibling->sibling = dp; - - if (!ret) - ret = dp; - prev_sibling = dp; - - *(*nextp) = dp; - *nextp = &dp->allnext; - - dp->path_component_name = build_path_component(dp); - dp->full_name = build_full_name(dp); - - if (ofw("child", 1, 1, node, &child)) { - printk(KERN_ERR "PROM: %s: fetching child failed!\n", __func__); - return NULL; - } - dp->child = build_tree(dp, child, nextp); - - if (ofw("peer", 1, 1, node, &node)) { - printk(KERN_ERR "PROM: %s: fetching peer failed!\n", __func__); - return NULL; - } - } - - return ret; -} - -static phandle root_node; - -void __init prom_build_devicetree(void) -{ - struct device_node **nextp; - u32 child; - - if (ofw("peer", 1, 1, 0, &root_node)) { - printk(KERN_ERR "PROM: unable to get root node from OFW!\n"); - return; - } - - allnodes = create_node(root_node, NULL); - allnodes->path_component_name = ""; - allnodes->full_name = "/"; - - nextp = &allnodes->allnext; - if (ofw("child", 1, 1, allnodes->node, &child)) { - printk(KERN_ERR "PROM: unable to get child node from OFW!\n"); - return; - } - allnodes->child = build_tree(allnodes, child, &nextp); - printk("PROM: Built device tree with %u bytes of memory.\n", - prom_early_allocated); -} diff --git a/target/linux/olpc/files/arch/i386/pci/olpc.c b/target/linux/olpc/files/arch/i386/pci/olpc.c deleted file mode 100644 index 1518d254c5..0000000000 --- a/target/linux/olpc/files/arch/i386/pci/olpc.c +++ /dev/null @@ -1,298 +0,0 @@ -/* - * olpcpci.c - Low-level PCI config space access for OLPC systems - * without the VSA PCI virtualization software. - * - * The AMD Geode chipset (GX2 processor, cs5536 I/O companion device) - * has some I/O functions (display, southbridge, sound, USB HCIs, etc) - * that more or less behave like PCI devices, but the hardware doesn't - * directly implement the PCI configuration space headers. AMD provides - * "VSA" (Virtual System Architecture) software that emulates PCI config - * space for these devices, by trapping I/O accesses to PCI config register - * (CF8/CFC) and running some code in System Management Mode interrupt state. - * On the OLPC platform, we don't want to use that VSA code because - * (a) it slows down suspend/resume, and (b) recompiling it requires special - * compilers that are hard to get. So instead of letting the complex VSA - * code simulate the PCI config registers for the on-chip devices, we - * just simulate them the easy way, by inserting the code into the - * pci_write_config and pci_read_config path. Most of the config registers - * are read-only anyway, so the bulk of the simulation is just table lookup. - */ - -#include -#include -#include -#include -#include "pci.h" - -static int is_lx; - -/* - * In the tables below, the first two line (8 longwords) are the - * size masks that are used when the higher level PCI code determines - * the size of the region by writing ~0 to a base address register - * and reading back the result. - * - * The following lines are the values that are read during normal - * PCI config access cycles, i.e. not after just having written - * ~0 to a base address register. - */ - -static const u32 lxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - - 0x281022 , 0x2200005 , 0x6000021 , 0x80f808 , /* AMD Vendor ID */ - 0x0 , 0x0 , 0x0 , 0x0 , /* No virtual registers, hence no BAR for them */ - 0x0 , 0x0 , 0x0 , 0x28100b , - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , -}; - -static const u32 gxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ - 0xfffffffd , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - - 0x28100b , 0x2200005 , 0x6000021 , 0x80f808 , /* NSC Vendor ID */ - 0xac1d , 0x0 , 0x0 , 0x0 , /* I/O BAR - base of virtual registers */ - 0x0 , 0x0 , 0x0 , 0x28100b , - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , -}; - -static const u32 lxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ - 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 , - 0x0 , 0x0 , 0x0 , 0x0 , - - 0x20811022 , 0x2200003 , 0x3000000 , 0x0 , /* AMD Vendor ID */ - 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */ - 0xfe00c000 , 0x0 , 0x0 , 0x30100b , /* VIP */ - 0x0 , 0x0 , 0x0 , 0x10e , /* INTA, IRQ14 for graphics accel */ - 0x0 , 0x0 , 0x0 , 0x0 , - 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */ - 0x0 , 0x0 , 0x0 , 0x0 , -}; - -static const u32 gxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ - 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 , - 0x0 , 0x0 , 0x0 , 0x0 , - - 0x30100b , 0x2200003 , 0x3000000 , 0x0 , /* NSC Vendor ID */ - 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */ - 0x0 , 0x0 , 0x0 , 0x30100b , - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */ - 0x0 , 0x0 , 0x0 , 0x0 , -}; - -static const u32 aes_hdr[] = { /* dev 1 function 2 - devfn = 0xa */ - 0xffffc000 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - - 0x20821022 , 0x2a00006 , 0x10100000 , 0x8 , /* NSC Vendor ID */ - 0xfe010000 , 0x0 , 0x0 , 0x0 , /* AES registers */ - 0x0 , 0x0 , 0x0 , 0x20821022 , - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , -}; - - -static const u32 isa_hdr[] = { /* dev f function 0 - devfn = 78 */ - 0xfffffff9 , 0xffffff01 , 0xffffffc1 , 0xffffffe1 , - 0xffffff81 , 0xffffffc1 , 0x0 , 0x0 , - - 0x20901022 , 0x2a00049 , 0x6010003 , 0x802000 , - 0x18b1 , 0x1001 , 0x1801 , 0x1881 , /* SMB-8 GPIO-256 MFGPT-64 IRQ-32 */ - 0x1401 , 0x1841 , 0x0 , 0x20901022 , /* PMS-128 ACPI-64 */ - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0xaa5b , /* interrupt steering */ - 0x0 , 0x0 , 0x0 , 0x0 , -}; - -static const u32 ac97_hdr[] = { /* dev f function 3 - devfn = 7b */ - 0xffffff81 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - - 0x20931022 , 0x2a00041 , 0x4010001 , 0x0 , - 0x1481 , 0x0 , 0x0 , 0x0 , /* I/O BAR-128 */ - 0x0 , 0x0 , 0x0 , 0x20931022 , - 0x0 , 0x0 , 0x0 , 0x205 , /* IntB , IRQ5 */ - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , -}; - -static const u32 ohci_hdr[] = { /* dev f function 4 - devfn = 7c */ - 0xfffff000 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - - 0x20941022 , 0x2300006 , 0xc031002 , 0x0 , - 0xfe01a000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */ - 0x0 , 0x0 , 0x0 , 0x20941022 , - 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */ - 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */ - 0x0 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , -}; - -static const u32 ehci_hdr[] = { /* dev f function 4 - devfn = 7d */ - 0xfffff000 , 0x0 , 0x0 , 0x0 , - 0x0 , 0x0 , 0x0 , 0x0 , - - 0x20951022 , 0x2300006 , 0xc032002 , 0x0 , - 0xfe01b000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */ - 0x0 , 0x0 , 0x0 , 0x20951022 , - 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */ - 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */ -#if 0 - 0x1 , 0x40080000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */ -#endif - 0x01000001 , 0x00000000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */ - 0x2020 , 0x0 , 0x0 , 0x0 , /* (EHCI page 8) 60 SBRN (R/O), 61 FLADJ (R/W), PORTWAKECAP */ -}; - -static u32 ff_loc = ~0; -static u32 zero_loc = 0; - -static int bar_probing = 0; /* Set after a write of ~0 to a BAR */ - -#define NB_SLOT 0x1 /* Northbridge - GX chip - Device 1 */ -#define SB_SLOT 0xf /* Southbridge - CS5536 chip - Device F */ -#define SIMULATED(bus, devfn) (((bus) == 0) && ((PCI_SLOT(devfn) == NB_SLOT) || (PCI_SLOT(devfn) == SB_SLOT))) - -static u32 *hdr_addr(const u32 *hdr, int reg) -{ - u32 addr; - - /* - * This is a little bit tricky. The header maps consist of - * 0x20 bytes of size masks, followed by 0x70 bytes of header data. - * In the normal case, when not probing a BAR's size, we want - * to access the header data, so we add 0x20 to the reg offset, - * thus skipping the size mask area. - * In the BAR probing case, we want to access the size mask for - * the BAR, so we subtract 0x10 (the config header offset for - * BAR0), and don't skip the size mask area. - */ - - addr = (u32)hdr + reg + (bar_probing ? -0x10 : 0x20); - - bar_probing = 0; - return (u32 *)addr; -} - -static int pci_olpc_read(unsigned int seg, unsigned int bus, - unsigned int devfn, int reg, int len, u32 *value) -{ - u32 *addr; - - /* Use the hardware mechanism for non-simulated devices */ - if (!SIMULATED(bus, devfn)) - return pci_conf1_read(seg, bus, devfn, reg, len, value); - - /* - * No device has config registers past 0x70, so we save table space - * by not storing entries for the nonexistent registers - */ - if (reg >= 0x70) - addr = &zero_loc; - else { - switch (devfn) { - case 0x8: - addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg); - break; - case 0x9: - addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg); - break; - case 0xa: - addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc; - break; - case 0x78: - addr = hdr_addr(isa_hdr, reg); - break; - case 0x7b: - addr = hdr_addr(ac97_hdr, reg); - break; - case 0x7c: - addr = hdr_addr(ohci_hdr, reg); - break; - case 0x7d: - addr = hdr_addr(ehci_hdr, reg); - break; - default: - addr = &ff_loc; - break; - } - } - switch (len) { - case 1: - *value = *(u8 *) addr; - break; - case 2: - *value = *(u16 *) addr; - break; - case 4: - *value = *addr; - break; - default: - BUG(); - } - - return 0; -} - -static int pci_olpc_write(unsigned int seg, unsigned int bus, - unsigned int devfn, int reg, int len, u32 value) -{ - /* Use the hardware mechanism for non-simulated devices */ - if (!SIMULATED(bus, devfn)) - return pci_conf1_write(seg, bus, devfn, reg, len, value); - - /* XXX we may want to extend this to simulate EHCI power management */ - - /* - * Mostly we just discard writes, but if the write is a size probe - * (i.e. writing ~0 to a BAR), we remember it and arrange to return - * the appropriate size mask on the next read. This is cheating - * to some extent, because it depends on the fact that the next - * access after such a write will always be a read to the same BAR. - */ - - if ((reg >= 0x10) && (reg < 0x2c)) { - /* Write is to a BAR */ - if (value == ~0) - bar_probing = 1; - } else { - /* - * No warning on writes to ROM BAR, CMD, LATENCY_TIMER, - * CACHE_LINE_SIZE, or PM registers. - */ - if ((reg != 0x30) && (reg != 0x04) && (reg != 0x0d) && - (reg != 0x0c) && (reg != 0x44)) - printk(KERN_WARNING "OLPC PCI: Config write to devfn %x reg %x value %x\n", devfn, reg, value); - } - - return 0; -} - -static struct pci_raw_ops pci_olpc_conf = { - .read = pci_olpc_read, - .write = pci_olpc_write, -}; - -void __init pci_olpc_init(void) -{ - if (!machine_is_olpc() || olpc_has_vsa()) - return; - - printk(KERN_INFO "PCI: Using configuration type OLPC\n"); - raw_pci_ops = &pci_olpc_conf; - is_lx = is_geode_lx(); -} diff --git a/target/linux/olpc/files/drivers/input/mouse/olpc.c b/target/linux/olpc/files/drivers/input/mouse/olpc.c deleted file mode 100644 index dc575ac062..0000000000 --- a/target/linux/olpc/files/drivers/input/mouse/olpc.c +++ /dev/null @@ -1,554 +0,0 @@ -/* - * OLPC touchpad PS/2 mouse driver - * - * Copyright (c) 2006 One Laptop Per Child, inc. - * Authors Zephaniah E. Hull and Andres Salomon - * - * This driver is partly based on the ALPS driver, which is: - * - * Copyright (c) 2003 Neil Brown - * Copyright (c) 2003-2005 Peter Osterlund - * Copyright (c) 2004 Dmitry Torokhov - * Copyright (c) 2005 Vojtech Pavlik - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * The touchpad on the OLPC is fairly wide, with the entire area usable - * as a tablet ("PT mode"), and the center 1/3rd also usable as a touchpad - * ("GS mode"). - * - * Earlier version of the device had simultaneous reporting; however, that - * was removed. Instead, the device now reports packets in one mode, and - * tells the driver when a mode switch needs to happen. - */ - -#include -#include -#include -#include -#include - -#include "psmouse.h" -#include "olpc.h" - -static int tpdebug; -module_param(tpdebug, int, 0644); - -#define OLPC_GS 1 /* The GS sensor. */ -#define OLPC_PT 2 /* The PT sensor. */ - -static struct olpc_model_info olpc_model_data[] = { - { { 0x67, 0x00, 0x00 }, OLPC_GS | OLPC_PT }, /* unknown ID */ - { { 0x67, 0x00, 0x0a }, OLPC_GS | OLPC_PT }, /* pre-B1 */ - { { 0x67, 0x00, 0x14 }, OLPC_GS }, /* B1.*/ - { { 0x67, 0x00, 0x28 }, OLPC_GS | OLPC_PT }, /* B2 */ - { { 0x67, 0x00, 0x3c }, OLPC_GS | OLPC_PT }, /* B2-2 */ - { { 0x67, 0x00, 0x50 }, OLPC_GS | OLPC_PT }, /* C1 */ -}; - -#define OLPC_PKT_PT 0xcf -#define OLPC_PKT_GS 0xff - -static int olpc_absolute_mode(struct psmouse *psmouse, int mode); - -/* - * OLPC absolute Mode - single-mode format - * - * byte 0: 1 1 0 0 1 1 1 1 - * byte 1: 0 x6 x5 x4 x3 x2 x1 x0 - * byte 2(PT): 0 0 x9 x8 x7 ? pt-dsw gs-dsw - * byte 2(GS): 0 x10 x9 x8 x7 ? gs-dsw pt-dsw - * byte 3: 0 y9 y8 y7 1 0 swr swl - * byte 4: 0 y6 y5 y4 y3 y2 y1 y0 - * byte 5: 0 z6 z5 z4 z3 z2 z1 z0 - * - * ?'s are not defined in the protocol spec, may vary between models. - * - * swr/swl are the left/right buttons. - * - * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a - * pen/finger - */ - -static void olpc_process_packet_gspt(struct psmouse *psmouse) -{ - struct olpc_data *priv = psmouse->private; - unsigned char *packet = psmouse->packet; - struct input_dev *dev = psmouse->dev; - struct input_dev *dev2 = priv->dev2; - int x, y, z, gs_down = 0, pt_down = 0, left, right; - struct timeval now_tv; - s64 now_ns; - - left = packet[3] & 1; - right = packet[3] & 2; - x = packet[1] | ((packet[2] & 0x78) << 4); - y = packet[4] | ((packet[3] & 0x70) << 3); - z = packet[5]; - - if (psmouse->packet[0] == OLPC_PKT_GS) { - pt_down = !!(packet[2] & 1); - gs_down = !!(packet[2] & 2); - } else if (psmouse->packet[0] == OLPC_PKT_PT) { - gs_down = !!(packet[2] & 1); - pt_down = !!(packet[2] & 2); - } - - /* - * XXX: Kludge. - * If it's been more than 30ms since the last packet, - * assume that there was a lift we were never told about. - */ - do_gettimeofday(&now_tv); - now_ns = timeval_to_ns (&now_tv); - if (now_ns >= priv->late) { - input_report_key(dev, BTN_TOUCH, 0); - input_report_key(dev, BTN_TOOL_PEN, 0); - input_report_key(dev2, BTN_TOUCH, 0); - input_report_key(dev2, BTN_TOOL_FINGER, 0); - - input_sync(dev); - input_sync(dev2); - } - - priv->late = now_ns + (30 * NSEC_PER_MSEC); - - - if (tpdebug) { - printk(KERN_DEBUG "%s %02x %02x %02x %02x %02x %02x\n", - __FUNCTION__, psmouse->packet[0], psmouse->packet[1], - psmouse->packet[2], psmouse->packet[3], psmouse->packet[4], - psmouse->packet[5]); - printk(KERN_DEBUG "l=%d r=%d p=%d g=%d x=%d y=%d z=%d\n", - left, right, pt_down, gs_down, x, y, z); - } - - if (psmouse->packet[0] == OLPC_PKT_PT) { - input_report_key(dev, BTN_LEFT, left); - input_report_key(dev, BTN_RIGHT, right); - } else if (psmouse->packet[0] == OLPC_PKT_GS) { - input_report_key(dev, BTN_LEFT, left); - input_report_key(dev, BTN_RIGHT, right); - input_report_key(dev2, BTN_LEFT, left); - input_report_key(dev2, BTN_RIGHT, right); - } - - input_report_key(dev, BTN_TOUCH, pt_down); - input_report_key(dev, BTN_TOOL_PEN, pt_down); - input_report_key(dev2, BTN_TOUCH, gs_down); - input_report_key(dev2, BTN_TOOL_FINGER, gs_down); - - input_report_abs(dev2, ABS_PRESSURE, z); - - if (psmouse->packet[0] == OLPC_PKT_PT && pt_down) { - input_report_abs(dev, ABS_X, x); - input_report_abs(dev, ABS_Y, y); - } else if (psmouse->packet[0] == OLPC_PKT_GS && gs_down) { - input_report_abs(dev2, ABS_X, x); - input_report_abs(dev2, ABS_Y, y); - } - - input_sync(dev); - input_sync(dev2); - - if (priv->pending_mode == OLPC_GS && - psmouse->packet[0] == OLPC_PKT_PT && pt_down) { - priv->pending_mode = 0; - cancel_delayed_work(&priv->mode_switch); - } - - if (priv->i->flags & (OLPC_PT|OLPC_GS)) { - int pending = 0; - if (psmouse->packet[0] == OLPC_PKT_PT && !pt_down) - pending = OLPC_GS; - else if (psmouse->packet[0] == OLPC_PKT_GS && pt_down) - pending = OLPC_PT; - - if (priv->current_mode == pending) { - priv->pending_mode = 0; - pending = priv->current_mode; - } - else if (priv->pending_mode != pending) { - priv->pending_mode = pending; - if (tpdebug) - printk(KERN_WARNING "Scheduling mode switch to %s.\n", - pending == OLPC_GS ? "GS" : "PT"); - - /* - * Apply a de-bounce when switching from PT to GS, to allow for - * spurious PT-up packets. - */ - if (priv->pending_mode == OLPC_GS) - queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50)); - else - queue_delayed_work(kpsmoused_wq, &priv->mode_switch, 0); - } - } -} - -static psmouse_ret_t olpc_process_byte(struct psmouse *psmouse) -{ - psmouse_ret_t ret = PSMOUSE_BAD_DATA; - - if (psmouse->packet[0] != OLPC_PKT_PT && - psmouse->packet[0] != OLPC_PKT_GS) - goto out; - - /* Bytes 2 - 6 should have 0 in the highest bit */ - if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 && - (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) - goto out; - - if (psmouse->pktcnt == 6) { - olpc_process_packet_gspt(psmouse); - ret = PSMOUSE_FULL_PACKET; - goto out; - } - - ret = PSMOUSE_GOOD_DATA; -out: - if (ret != PSMOUSE_GOOD_DATA && ret != PSMOUSE_FULL_PACKET) - printk(KERN_DEBUG "%s: (%d) %02x %02x %02x %02x %02x %02x\n", - __FUNCTION__, psmouse->pktcnt, psmouse->packet[0], - psmouse->packet[1], psmouse->packet[2], - psmouse->packet[3], psmouse->packet[4], - psmouse->packet[5]); - return ret; -} - -static struct olpc_model_info *olpc_get_model(struct psmouse *psmouse) -{ - struct ps2dev *ps2dev = &psmouse->ps2dev; - unsigned char param[4]; - int i; - - /* - * Now try "E7 report". Allowed responses are in - * olpc_model_data[].signature - */ - if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21)) - return NULL; - - param[0] = param[1] = param[2] = 0xff; - if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) - return NULL; - - pr_debug("olpc.c(%d): E7 report: %2.2x %2.2x %2.2x", - __LINE__, param[0], param[1], param[2]); - - for (i = 0; i < ARRAY_SIZE(olpc_model_data); i++) { - if (!memcmp(param, olpc_model_data[i].signature, - sizeof(olpc_model_data[i].signature))) { - printk(KERN_INFO __FILE__ ": OLPC touchpad revision 0x%x.\n", param[2]); - return olpc_model_data + i; - } - } - - /* - * ALPS creates new IDs pretty frequently; rather than listing them - * all, just assume they support the defaults. We've set aside the - * first entry of olpc_model_data as the catch-all. - */ - if (!memcmp(param, olpc_model_data[0].signature, 2)) { - printk(KERN_INFO __FILE__ ": unknown ALPS revision %x, assuming default flags.\n", param[2]); - return &olpc_model_data[0]; - } - - return NULL; -} - -static int olpc_find_mode(struct psmouse *psmouse) -{ - struct olpc_data *priv = psmouse->private; - int mode = priv->i->flags; - - if (mode & OLPC_GS) - mode = OLPC_GS; - else if (mode & OLPC_PT) - mode = OLPC_PT; - else - mode = -1; - - return mode; -} - -/* - * Touchpad should be disabled before calling this! - */ -static int olpc_new_mode(struct psmouse *psmouse, int mode) -{ - struct ps2dev *ps2dev = &psmouse->ps2dev; - struct olpc_data *priv = psmouse->private; - unsigned char param; - int ret; - - if (tpdebug) - printk(KERN_WARNING __FILE__ ": Switching to %d. [%lu]\n", mode, jiffies); - - if ((ret = ps2_command(ps2dev, ¶m, 0x01F2))) - goto failed; - if ((ret = ps2_command(ps2dev, ¶m, 0x01F2))) - goto failed; - if ((ret = ps2_command(ps2dev, ¶m, 0x01F2))) - goto failed; - - switch (mode) { - default: - printk(KERN_WARNING __FILE__ ": Invalid mode %d. Defaulting to OLPC_GS.\n", mode); - case OLPC_GS: - ret = ps2_command(ps2dev, NULL, 0xE6); - break; - case OLPC_PT: - ret = ps2_command(ps2dev, NULL, 0xE7); - break; - } - if (ret) - goto failed; - - /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */ - psmouse->pktcnt = psmouse->out_of_sync = 0; - psmouse->last = jiffies; - psmouse->state = PSMOUSE_ACTIVATED; - - if ((ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE))) - goto failed; - - priv->current_mode = mode; - priv->pending_mode = 0; - if (tpdebug) - printk(KERN_WARNING __FILE__ ": Switched to mode %d successful.\n", mode); - -failed: - if (ret) - printk(KERN_WARNING __FILE__ ": Mode switch to %d failed! (%d) [%lu]\n", mode, ret, jiffies); - return ret; -} - -static int olpc_absolute_mode(struct psmouse *psmouse, int mode) -{ - struct ps2dev *ps2dev = &psmouse->ps2dev; - - /* Switch to 'Advanced mode.', four disables in a row. */ - if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE)) - return -1; - - return olpc_new_mode(psmouse, mode); -} - -/* - * olpc_poll() - poll the touchpad for current motion packet. - * Used in resync. - * Note: We can't poll, so always return failure. - */ -static int olpc_poll(struct psmouse *psmouse) -{ - return -1; -} - -static int olpc_reconnect(struct psmouse *psmouse) -{ - struct olpc_data *priv = psmouse->private; - int mode; - - if (olpc_rev_after(OLPC_REV_B2)) - if (psmouse->ps2dev.serio->dev.power.power_state.event != PM_EVENT_ON) - return 0; - - psmouse_reset(psmouse); - - if (!(priv->i = olpc_get_model(psmouse))) - return -1; - - mode = olpc_find_mode(psmouse); - if (mode < 0) - return -1; - - if (olpc_absolute_mode(psmouse, mode)) { - printk(KERN_ERR __FILE__ ": Failed to reenable absolute mode.\n"); - return -1; - } - - return 0; -} - -static void olpc_disconnect(struct psmouse *psmouse) -{ - struct olpc_data *priv = psmouse->private; - - psmouse_reset(psmouse); - input_unregister_device(priv->dev2); - kfree(priv); -} - -static void olpc_mode_switch(struct work_struct *w) -{ - struct delayed_work *work = container_of(w, struct delayed_work, work); - struct olpc_data *priv = container_of(work, struct olpc_data, mode_switch); - struct psmouse *psmouse = priv->psmouse; - struct ps2dev *ps2dev = &psmouse->ps2dev; - int pending_mode, ret; - - if (priv->pending_mode == priv->current_mode) { - priv->pending_mode = 0; - printk (KERN_DEBUG __FILE__ ": In switch_mode, no target mode.\n"); - return; - } - - if (tpdebug) - printk(KERN_WARNING __FILE__ ": Disable for switch to %d. [%lu]\n", priv->pending_mode, jiffies); - - /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */ - psmouse->state = PSMOUSE_INITIALIZING; - - ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); - if (ret) { - /* XXX: if this ever fails, we need to do a full reset! */ - printk(KERN_WARNING __FILE__ ": Disable failed for switch to %d. (%d) [%lu]\n", priv->pending_mode, ret, jiffies); - return; - } - - /* - * ALPS tells us that it may take up to 20msec for the disable to - * take effect; however, ps2_command() will wait up to 200msec for - * the ACK to come back (and I'm assuming that by the time the - * hardware sends back its ACK, it has stopped sending bytes). - */ - pending_mode = priv->pending_mode; - - if (olpc_new_mode(psmouse, priv->pending_mode)) - goto bad; - - /* - * Deal with a potential race condition. - * - * If there is a brief tap of a stylus or a fingernail that - * triggers a mode switch to PT mode, and the stylus/fingernail is - * lifted after the DISABLE above, but before we reenable in the new mode, - * then we can get stuck in PT mode. - */ - if (pending_mode == OLPC_PT) { - priv->pending_mode = OLPC_GS; - queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50)); - } - - return; - -bad: - printk(KERN_WARNING __FILE__ ": Failure to switch modes, resetting device...\n"); - olpc_reconnect(psmouse); -} - -int olpc_init(struct psmouse *psmouse) -{ - struct olpc_data *priv; - struct input_dev *dev = psmouse->dev; - struct input_dev *dev2; - int mode; - - priv = kzalloc(sizeof(struct olpc_data), GFP_KERNEL); - dev2 = input_allocate_device(); - if (!priv || !dev2) - goto init_fail; - - psmouse->private = priv; - priv->dev2 = dev2; - priv->psmouse = psmouse; - - psmouse_reset(psmouse); - if (!(priv->i = olpc_get_model(psmouse))) - goto init_fail; - - mode = olpc_find_mode(psmouse); - if (mode < 0) { - printk(KERN_ERR __FILE__ ": Failed to identify proper mode\n"); - goto init_fail; - } - - if (olpc_absolute_mode(psmouse, mode)) { - printk(KERN_ERR __FILE__ ": Failed to enable absolute mode\n"); - goto init_fail; - } - - /* - * Unset some of the default bits for things we don't have. - */ - dev->evbit[LONG(EV_REL)] &= ~BIT(EV_REL); - dev->relbit[LONG(REL_X)] &= ~(BIT(REL_X) | BIT(REL_Y)); - dev->keybit[LONG(BTN_MIDDLE)] &= ~BIT(BTN_MIDDLE); - - dev->evbit[LONG(EV_KEY)] |= BIT(EV_KEY); - dev->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); - dev->keybit[LONG(BTN_TOOL_PEN)] |= BIT(BTN_TOOL_PEN); - dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT); - - dev->evbit[LONG(EV_ABS)] |= BIT(EV_ABS); - input_set_abs_params(dev, ABS_X, 2, 1000, 0, 0); - input_set_abs_params(dev, ABS_Y, 0, 717, 0, 0); - - snprintf(priv->phys, sizeof(priv->phys), - "%s/input1", psmouse->ps2dev.serio->phys); - dev2->phys = priv->phys; - dev2->name = "OLPC ALPS GlideSensor"; - dev2->id.bustype = BUS_I8042; - dev2->id.vendor = 0x0002; - dev2->id.product = PSMOUSE_OLPC; - dev2->id.version = 0x0000; - - dev2->evbit[LONG(EV_KEY)] |= BIT(EV_KEY); - dev2->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); - dev2->keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER); - dev2->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT); - - dev2->evbit[LONG(EV_ABS)] |= BIT(EV_ABS); - input_set_abs_params(dev2, ABS_X, 350, 512, 0, 0); - input_set_abs_params(dev2, ABS_Y, 70, 325, 0, 0); - input_set_abs_params(dev2, ABS_PRESSURE, 0, 63, 0, 0); - - if (input_register_device(dev2)) { - printk(KERN_ERR __FILE__ ": Failed to register GlideSensor\n"); - goto init_fail; - } - - psmouse->protocol_handler = olpc_process_byte; - psmouse->poll = olpc_poll; - psmouse->disconnect = olpc_disconnect; - psmouse->reconnect = olpc_reconnect; - psmouse->pktsize = 6; - - /* Disable the idle resync. */ - psmouse->resync_time = 0; - /* Reset after a lot of bad bytes. */ - psmouse->resetafter = 1024; - - INIT_DELAYED_WORK(&priv->mode_switch, olpc_mode_switch); - - return 0; - -init_fail: - input_free_device(dev2); - kfree(priv); - return -1; -} - -int olpc_detect(struct psmouse *psmouse, int set_properties) -{ - if (!olpc_get_model(psmouse)) - return -1; - - if (set_properties) { - psmouse->vendor = "ALPS"; - psmouse->name = "PenTablet"; - psmouse->model = 0; - } - return 0; -} - diff --git a/target/linux/olpc/files/drivers/input/mouse/olpc.h b/target/linux/olpc/files/drivers/input/mouse/olpc.h deleted file mode 100644 index 426f8b4ea9..0000000000 --- a/target/linux/olpc/files/drivers/input/mouse/olpc.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * OLPC touchpad PS/2 mouse driver - * - * Copyright (c) 2006 One Laptop Per Child, inc. - * - * This driver is partly based on the ALPS driver. - * Copyright (c) 2003 Peter Osterlund - * Copyright (c) 2005 Vojtech Pavlik - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#ifndef _OLPC_H -#define _OLPC_H - -struct olpc_model_info { - unsigned char signature[3]; - unsigned char flags; -}; - -struct olpc_data { - struct input_dev *dev2; /* Relative device */ - struct psmouse *psmouse; - char name[32]; /* Name */ - char phys[32]; /* Phys */ - struct olpc_model_info *i; /* Info */ - int pending_mode; - int current_mode; - s64 late; - struct delayed_work mode_switch; -}; - -#ifdef CONFIG_MOUSE_PS2_OLPC -int olpc_detect(struct psmouse *psmouse, int set_properties); -int olpc_init(struct psmouse *psmouse); -#else -inline int olpc_detect(struct psmouse *psmouse, int set_properties) -{ - return -ENOSYS; -} -inline int olpc_init(struct psmouse *psmouse) -{ - return -ENOSYS; -} -#endif - -#endif diff --git a/target/linux/olpc/files/drivers/mtd/mtdcore.h b/target/linux/olpc/files/drivers/mtd/mtdcore.h deleted file mode 100644 index a33251f4b8..0000000000 --- a/target/linux/olpc/files/drivers/mtd/mtdcore.h +++ /dev/null @@ -1,11 +0,0 @@ -/* linux/drivers/mtd/mtdcore.h - * - * Header file for driver private mtdcore exports - * - */ - -/* These are exported solely for the purpose of mtd_blkdevs.c. You - should not use them for _anything_ else */ - -extern struct mutex mtd_table_mutex; -extern struct mtd_info *mtd_table[MAX_MTD_DEVICES]; diff --git a/target/linux/olpc/files/drivers/mtd/mtdoops.c b/target/linux/olpc/files/drivers/mtd/mtdoops.c deleted file mode 100644 index cfc28ab4a3..0000000000 --- a/target/linux/olpc/files/drivers/mtd/mtdoops.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * MTD Oops/Panic logger - * - * Copyright (C) 2007 Nokia Corporation. All rights reserved. - * - * Author: Richard Purdie - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define OOPS_PAGE_SIZE 4096 - -static struct mtdoops_context { - int mtd_index; - struct work_struct work; - struct mtd_info *mtd; - int oops_pages; - int nextpage; - int nextcount; - - void *oops_buf; - int ready; - int writecount; -} oops_cxt; - -static void mtdoops_erase_callback(struct erase_info *done) -{ - wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv; - wake_up(wait_q); -} - -static int mtdoops_erase_block(struct mtd_info *mtd, int offset) -{ - struct erase_info erase; - DECLARE_WAITQUEUE(wait, current); - wait_queue_head_t wait_q; - int ret; - - init_waitqueue_head(&wait_q); - erase.mtd = mtd; - erase.callback = mtdoops_erase_callback; - erase.addr = offset; - if (mtd->erasesize < OOPS_PAGE_SIZE) - erase.len = OOPS_PAGE_SIZE; - else - erase.len = mtd->erasesize; - erase.priv = (u_long)&wait_q; - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&wait_q, &wait); - - ret = mtd->erase(mtd, &erase); - if (ret) { - set_current_state(TASK_RUNNING); - remove_wait_queue(&wait_q, &wait); - printk (KERN_WARNING "mtdoops: erase of region [0x%x, 0x%x] " - "on \"%s\" failed\n", - erase.addr, erase.len, mtd->name); - return ret; - } - - schedule(); /* Wait for erase to finish. */ - remove_wait_queue(&wait_q, &wait); - - return 0; -} - -static int mtdoops_inc_counter(struct mtdoops_context *cxt) -{ - struct mtd_info *mtd = cxt->mtd; - size_t retlen; - u32 count; - int ret; - - cxt->nextpage++; - if (cxt->nextpage > cxt->oops_pages) - cxt->nextpage = 0; - cxt->nextcount++; - if (cxt->nextcount == 0xffffffff) - cxt->nextcount = 0; - - ret = mtd->read(mtd, cxt->nextpage * OOPS_PAGE_SIZE, 4, - &retlen, (u_char *) &count); - if ((retlen != 4) || (ret < 0)) { - printk(KERN_ERR "mtdoops: Read failure at %d (%d of 4 read)" - ", err %d.\n", cxt->nextpage * OOPS_PAGE_SIZE, - retlen, ret); - return 1; - } - - /* See if we need to erase the next block */ - if (count != 0xffffffff) - return 1; - - printk(KERN_DEBUG "mtdoops: Ready %d, %d (no erase)\n", - cxt->nextpage, cxt->nextcount); - cxt->ready = 1; - return 0; -} - -static void mtdoops_prepare(struct mtdoops_context *cxt) -{ - struct mtd_info *mtd = cxt->mtd; - int i = 0, j, ret, mod; - - /* We were unregistered */ - if (!mtd) - return; - - mod = (cxt->nextpage * OOPS_PAGE_SIZE) % mtd->erasesize; - if (mod != 0) { - cxt->nextpage = cxt->nextpage + ((mtd->erasesize - mod) / OOPS_PAGE_SIZE); - if (cxt->nextpage > cxt->oops_pages) - cxt->nextpage = 0; - } - - while (mtd->block_isbad && - mtd->block_isbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE)) { -badblock: - printk(KERN_WARNING "mtdoops: Bad block at %08x\n", - cxt->nextpage * OOPS_PAGE_SIZE); - i++; - cxt->nextpage = cxt->nextpage + (mtd->erasesize / OOPS_PAGE_SIZE); - if (cxt->nextpage > cxt->oops_pages) - cxt->nextpage = 0; - if (i == (cxt->oops_pages / (mtd->erasesize / OOPS_PAGE_SIZE))) { - printk(KERN_ERR "mtdoops: All blocks bad!\n"); - return; - } - } - - for (j = 0, ret = -1; (j < 3) && (ret < 0); j++) - ret = mtdoops_erase_block(mtd, cxt->nextpage * OOPS_PAGE_SIZE); - - if (ret < 0) { - if (mtd->block_markbad) - mtd->block_markbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE); - goto badblock; - } - - printk(KERN_DEBUG "mtdoops: Ready %d, %d \n", cxt->nextpage, cxt->nextcount); - - cxt->ready = 1; -} - -static void mtdoops_workfunc(struct work_struct *work) -{ - struct mtdoops_context *cxt = - container_of(work, struct mtdoops_context, work); - - mtdoops_prepare(cxt); -} - -static int find_next_position(struct mtdoops_context *cxt) -{ - struct mtd_info *mtd = cxt->mtd; - int page, maxpos = 0; - u32 count, maxcount = 0xffffffff; - size_t retlen; - - for (page = 0; page < cxt->oops_pages; page++) { - mtd->read(mtd, page * OOPS_PAGE_SIZE, 4, &retlen, (u_char *) &count); - if (count == 0xffffffff) - continue; - if (maxcount == 0xffffffff) { - maxcount = count; - maxpos = page; - } else if ((count < 0x40000000) && (maxcount > 0xc0000000)) { - maxcount = count; - maxpos = page; - } else if ((count > maxcount) && (count < 0xc0000000)) { - maxcount = count; - maxpos = page; - } else if ((count > maxcount) && (count > 0xc0000000) - && (maxcount > 0x80000000)) { - maxcount = count; - maxpos = page; - } - } - if (maxcount == 0xffffffff) { - cxt->nextpage = 0; - cxt->nextcount = 1; - cxt->ready = 1; - printk(KERN_DEBUG "mtdoops: Ready %d, %d (first init)\n", - cxt->nextpage, cxt->nextcount); - return 0; - } - - cxt->nextpage = maxpos; - cxt->nextcount = maxcount; - - return mtdoops_inc_counter(cxt); -} - - -static void mtdoops_notify_add(struct mtd_info *mtd) -{ - struct mtdoops_context *cxt = &oops_cxt; - int ret; - - if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0) - return; - - if (mtd->size < (mtd->erasesize * 2)) { - printk(KERN_ERR "MTD partition %d not big enough for mtdoops\n", - mtd->index); - return; - } - - cxt->mtd = mtd; - cxt->oops_pages = mtd->size / OOPS_PAGE_SIZE; - - ret = find_next_position(cxt); - if (ret == 1) - mtdoops_prepare(cxt); - - printk(KERN_DEBUG "mtdoops: Attached to MTD device %d\n", mtd->index); -} - -static void mtdoops_notify_remove(struct mtd_info *mtd) -{ - struct mtdoops_context *cxt = &oops_cxt; - - if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0) - return; - - cxt->mtd = NULL; - flush_scheduled_work(); -} - - -static void -mtdoops_console_write(struct console *co, const char *s, unsigned int count) -{ - struct mtdoops_context *cxt = co->data; - struct mtd_info *mtd = cxt->mtd; - int i, ret; - - if (!cxt->ready || !mtd) - return; - - if (!oops_in_progress && cxt->writecount != 0) { - size_t retlen; - if (cxt->writecount < OOPS_PAGE_SIZE) - memset(cxt->oops_buf + cxt->writecount, 0xff, - OOPS_PAGE_SIZE - cxt->writecount); - - ret = mtd->write(mtd, cxt->nextpage * OOPS_PAGE_SIZE, - OOPS_PAGE_SIZE, &retlen, cxt->oops_buf); - cxt->ready = 0; - cxt->writecount = 0; - - if ((retlen != OOPS_PAGE_SIZE) || (ret < 0)) - printk(KERN_ERR "mtdoops: Write failure at %d (%d of %d" - " written), err %d.\n", - cxt->nextpage * OOPS_PAGE_SIZE, retlen, - OOPS_PAGE_SIZE, ret); - - ret = mtdoops_inc_counter(cxt); - if (ret == 1) - schedule_work(&cxt->work); - } - - if (!oops_in_progress) - return; - - if (cxt->writecount == 0) { - u32 *stamp = cxt->oops_buf; - *stamp = cxt->nextcount; - cxt->writecount = 4; - } - - if ((count + cxt->writecount) > OOPS_PAGE_SIZE) - count = OOPS_PAGE_SIZE - cxt->writecount; - - for (i = 0; i < count; i++, s++) - *((char *)(cxt->oops_buf) + cxt->writecount + i) = *s; - - cxt->writecount = cxt->writecount + count; -} - -static int __init mtdoops_console_setup(struct console *co, char *options) -{ - struct mtdoops_context *cxt = co->data; - - if (cxt->mtd_index != -1) - return -EBUSY; - if (co->index == -1) - return -EINVAL; - - cxt->mtd_index = co->index; - return 0; -} - -static struct mtd_notifier mtdoops_notifier = { - .add = mtdoops_notify_add, - .remove = mtdoops_notify_remove, -}; - -static struct console mtdoops_console = { - .name = "ttyMTD", - .write = mtdoops_console_write, - .setup = mtdoops_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &oops_cxt, -}; - -static int __init mtdoops_console_init(void) -{ - struct mtdoops_context *cxt = &oops_cxt; - - cxt->mtd_index = -1; - cxt->oops_buf = vmalloc(OOPS_PAGE_SIZE); - - if (!cxt->oops_buf) { - printk(KERN_ERR "Failed to allocate oops buffer workspace\n"); - return -ENOMEM; - } - - INIT_WORK(&cxt->work, mtdoops_workfunc); - - register_console(&mtdoops_console); - register_mtd_user(&mtdoops_notifier); - return 0; -} - -static void __exit mtdoops_console_exit(void) -{ - struct mtdoops_context *cxt = &oops_cxt; - - unregister_mtd_user(&mtdoops_notifier); - unregister_console(&mtdoops_console); - vfree(cxt->oops_buf); -} - - -subsys_initcall(mtdoops_console_init); -module_exit(mtdoops_console_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Richard Purdie "); -MODULE_DESCRIPTION("MTD Oops/Panic console logger/driver"); diff --git a/target/linux/olpc/files/drivers/mtd/onenand/onenand_sim.c b/target/linux/olpc/files/drivers/mtd/onenand/onenand_sim.c deleted file mode 100644 index b80667309b..0000000000 --- a/target/linux/olpc/files/drivers/mtd/onenand/onenand_sim.c +++ /dev/null @@ -1,495 +0,0 @@ -/* - * linux/drivers/mtd/onenand/onenand_sim.c - * - * The OneNAND simulator - * - * Copyright © 2005-2007 Samsung Electronics - * Kyungmin Park - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#ifndef CONFIG_ONENAND_SIM_MANUFACTURER -#define CONFIG_ONENAND_SIM_MANUFACTURER 0xec -#endif -#ifndef CONFIG_ONENAND_SIM_DEVICE_ID -#define CONFIG_ONENAND_SIM_DEVICE_ID 0x04 -#endif -#ifndef CONFIG_ONENAND_SIM_VERSION_ID -#define CONFIG_ONENAND_SIM_VERSION_ID 0x1e -#endif - -static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER; -static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID; -static int version_id = CONFIG_ONENAND_SIM_VERSION_ID; - -struct onenand_flash { - void __iomem *base; - void __iomem *data; -}; - -#define ONENAND_CORE(flash) (flash->data) -#define ONENAND_CORE_SPARE(flash, this, offset) \ - ((flash->data) + (this->chipsize) + (offset >> 5)) - -#define ONENAND_MAIN_AREA(this, offset) \ - (this->base + ONENAND_DATARAM + offset) - -#define ONENAND_SPARE_AREA(this, offset) \ - (this->base + ONENAND_SPARERAM + offset) - -#define ONENAND_GET_WP_STATUS(this) \ - (readw(this->base + ONENAND_REG_WP_STATUS)) - -#define ONENAND_SET_WP_STATUS(v, this) \ - (writew(v, this->base + ONENAND_REG_WP_STATUS)) - -/* It has all 0xff chars */ -#define MAX_ONENAND_PAGESIZE (2048 + 64) -static unsigned char *ffchars; - -static struct mtd_partition os_partitions[] = { - { - .name = "OneNAND simulator partition", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -/* - * OneNAND simulator mtd - */ -struct onenand_info { - struct mtd_info mtd; - struct mtd_partition *parts; - struct onenand_chip onenand; - struct onenand_flash flash; -}; - -struct onenand_info *info; - -#define DPRINTK(format, args...) \ -do { \ - printk(KERN_DEBUG "%s[%d]: " format "\n", __func__, \ - __LINE__, ##args); \ -} while (0) - -/** - * onenand_lock_handle - Handle Lock scheme - * @param this OneNAND device structure - * @param cmd The command to be sent - * - * Send lock command to OneNAND device. - * The lock scheme is depends on chip type. - */ -static void onenand_lock_handle(struct onenand_chip *this, int cmd) -{ - int block_lock_scheme; - int status; - - status = ONENAND_GET_WP_STATUS(this); - block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK); - - switch (cmd) { - case ONENAND_CMD_UNLOCK: - if (block_lock_scheme) - ONENAND_SET_WP_STATUS(ONENAND_WP_US, this); - else - ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this); - break; - - case ONENAND_CMD_LOCK: - if (block_lock_scheme) - ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this); - else - ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this); - break; - - case ONENAND_CMD_LOCK_TIGHT: - if (block_lock_scheme) - ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this); - else - ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this); - break; - - default: - break; - } -} - -/** - * onenand_bootram_handle - Handle BootRAM area - * @param this OneNAND device structure - * @param cmd The command to be sent - * - * Emulate BootRAM area. It is possible to do basic operation using BootRAM. - */ -static void onenand_bootram_handle(struct onenand_chip *this, int cmd) -{ - switch (cmd) { - case ONENAND_CMD_READID: - writew(manuf_id, this->base); - writew(device_id, this->base + 2); - writew(version_id, this->base + 4); - break; - - default: - /* REVIST: Handle other commands */ - break; - } -} - -/** - * onenand_update_interrupt - Set interrupt register - * @param this OneNAND device structure - * @param cmd The command to be sent - * - * Update interrupt register. The status is depends on command. - */ -static void onenand_update_interrupt(struct onenand_chip *this, int cmd) -{ - int interrupt = ONENAND_INT_MASTER; - - switch (cmd) { - case ONENAND_CMD_READ: - case ONENAND_CMD_READOOB: - interrupt |= ONENAND_INT_READ; - break; - - case ONENAND_CMD_PROG: - case ONENAND_CMD_PROGOOB: - interrupt |= ONENAND_INT_WRITE; - break; - - case ONENAND_CMD_ERASE: - interrupt |= ONENAND_INT_ERASE; - break; - - case ONENAND_CMD_RESET: - interrupt |= ONENAND_INT_RESET; - break; - - default: - break; - } - - writew(interrupt, this->base + ONENAND_REG_INTERRUPT); -} - -/** - * onenand_check_overwrite - Check over-write if happend - * @param dest The destination pointer - * @param src The source pointer - * @param count The length to be check - * @return 0 on same, otherwise 1 - * - * Compare the source with destination - */ -static int onenand_check_overwrite(void *dest, void *src, size_t count) -{ - unsigned int *s = (unsigned int *) src; - unsigned int *d = (unsigned int *) dest; - int i; - - count >>= 2; - for (i = 0; i < count; i++) - if ((*s++ ^ *d++) != 0) - return 1; - - return 0; -} - -/** - * onenand_data_handle - Handle OneNAND Core and DataRAM - * @param this OneNAND device structure - * @param cmd The command to be sent - * @param dataram Which dataram used - * @param offset The offset to OneNAND Core - * - * Copy data from OneNAND Core to DataRAM (read) - * Copy data from DataRAM to OneNAND Core (write) - * Erase the OneNAND Core (erase) - */ -static void onenand_data_handle(struct onenand_chip *this, int cmd, - int dataram, unsigned int offset) -{ - struct mtd_info *mtd = &info->mtd; - struct onenand_flash *flash = this->priv; - int main_offset, spare_offset; - void __iomem *src; - void __iomem *dest; - unsigned int i; - - if (dataram) { - main_offset = mtd->writesize; - spare_offset = mtd->oobsize; - } else { - main_offset = 0; - spare_offset = 0; - } - - switch (cmd) { - case ONENAND_CMD_READ: - src = ONENAND_CORE(flash) + offset; - dest = ONENAND_MAIN_AREA(this, main_offset); - memcpy(dest, src, mtd->writesize); - /* Fall through */ - - case ONENAND_CMD_READOOB: - src = ONENAND_CORE_SPARE(flash, this, offset); - dest = ONENAND_SPARE_AREA(this, spare_offset); - memcpy(dest, src, mtd->oobsize); - break; - - case ONENAND_CMD_PROG: - src = ONENAND_MAIN_AREA(this, main_offset); - dest = ONENAND_CORE(flash) + offset; - /* To handle partial write */ - for (i = 0; i < (1 << mtd->subpage_sft); i++) { - int off = i * this->subpagesize; - if (!memcmp(src + off, ffchars, this->subpagesize)) - continue; - if (memcmp(dest + off, ffchars, this->subpagesize) && - onenand_check_overwrite(dest + off, src + off, this->subpagesize)) - printk(KERN_ERR "over-write happend at 0x%08x\n", offset); - memcpy(dest + off, src + off, this->subpagesize); - } - /* Fall through */ - - case ONENAND_CMD_PROGOOB: - src = ONENAND_SPARE_AREA(this, spare_offset); - /* Check all data is 0xff chars */ - if (!memcmp(src, ffchars, mtd->oobsize)) - break; - - dest = ONENAND_CORE_SPARE(flash, this, offset); - if (memcmp(dest, ffchars, mtd->oobsize) && - onenand_check_overwrite(dest, src, mtd->oobsize)) - printk(KERN_ERR "OOB: over-write happend at 0x%08x\n", - offset); - memcpy(dest, src, mtd->oobsize); - break; - - case ONENAND_CMD_ERASE: - memset(ONENAND_CORE(flash) + offset, 0xff, mtd->erasesize); - memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff, - (mtd->erasesize >> 5)); - break; - - default: - break; - } -} - -/** - * onenand_command_handle - Handle command - * @param this OneNAND device structure - * @param cmd The command to be sent - * - * Emulate OneNAND command. - */ -static void onenand_command_handle(struct onenand_chip *this, int cmd) -{ - unsigned long offset = 0; - int block = -1, page = -1, bufferram = -1; - int dataram = 0; - - switch (cmd) { - case ONENAND_CMD_UNLOCK: - case ONENAND_CMD_LOCK: - case ONENAND_CMD_LOCK_TIGHT: - case ONENAND_CMD_UNLOCK_ALL: - onenand_lock_handle(this, cmd); - break; - - case ONENAND_CMD_BUFFERRAM: - /* Do nothing */ - return; - - default: - block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1); - if (block & (1 << ONENAND_DDP_SHIFT)) { - block &= ~(1 << ONENAND_DDP_SHIFT); - /* The half of chip block */ - block += this->chipsize >> (this->erase_shift + 1); - } - if (cmd == ONENAND_CMD_ERASE) - break; - - page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8); - page = (page >> ONENAND_FPA_SHIFT); - bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER); - bufferram >>= ONENAND_BSA_SHIFT; - bufferram &= ONENAND_BSA_DATARAM1; - dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0; - break; - } - - if (block != -1) - offset += block << this->erase_shift; - - if (page != -1) - offset += page << this->page_shift; - - onenand_data_handle(this, cmd, dataram, offset); - - onenand_update_interrupt(this, cmd); -} - -/** - * onenand_writew - [OneNAND Interface] Emulate write operation - * @param value value to write - * @param addr address to write - * - * Write OneNAND register with value - */ -static void onenand_writew(unsigned short value, void __iomem * addr) -{ - struct onenand_chip *this = info->mtd.priv; - - /* BootRAM handling */ - if (addr < this->base + ONENAND_DATARAM) { - onenand_bootram_handle(this, value); - return; - } - /* Command handling */ - if (addr == this->base + ONENAND_REG_COMMAND) - onenand_command_handle(this, value); - - writew(value, addr); -} - -/** - * flash_init - Initialize OneNAND simulator - * @param flash OneNAND simulaotr data strucutres - * - * Initialize OneNAND simulator. - */ -static int __init flash_init(struct onenand_flash *flash) -{ - int density, size; - int buffer_size; - - flash->base = kzalloc(131072, GFP_KERNEL); - if (!flash->base) { - printk(KERN_ERR "Unable to allocate base address.\n"); - return -ENOMEM; - } - - density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT; - size = ((16 << 20) << density); - - ONENAND_CORE(flash) = vmalloc(size + (size >> 5)); - if (!ONENAND_CORE(flash)) { - printk(KERN_ERR "Unable to allocate nand core address.\n"); - kfree(flash->base); - return -ENOMEM; - } - - memset(ONENAND_CORE(flash), 0xff, size + (size >> 5)); - - /* Setup registers */ - writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID); - writew(device_id, flash->base + ONENAND_REG_DEVICE_ID); - writew(version_id, flash->base + ONENAND_REG_VERSION_ID); - - if (density < 2) - buffer_size = 0x0400; /* 1KiB page */ - else - buffer_size = 0x0800; /* 2KiB page */ - writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE); - - return 0; -} - -/** - * flash_exit - Clean up OneNAND simulator - * @param flash OneNAND simulaotr data strucutres - * - * Clean up OneNAND simulator. - */ -static void flash_exit(struct onenand_flash *flash) -{ - vfree(ONENAND_CORE(flash)); - kfree(flash->base); - kfree(flash); -} - -static int __init onenand_sim_init(void) -{ - /* Allocate all 0xff chars pointer */ - ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL); - if (!ffchars) { - printk(KERN_ERR "Unable to allocate ff chars.\n"); - return -ENOMEM; - } - memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE); - - /* Allocate OneNAND simulator mtd pointer */ - info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL); - if (!info) { - printk(KERN_ERR "Unable to allocate core structures.\n"); - kfree(ffchars); - return -ENOMEM; - } - - /* Override write_word function */ - info->onenand.write_word = onenand_writew; - - if (flash_init(&info->flash)) { - printk(KERN_ERR "Unable to allocat flash.\n"); - kfree(ffchars); - kfree(info); - return -ENOMEM; - } - - info->parts = os_partitions; - - info->onenand.base = info->flash.base; - info->onenand.priv = &info->flash; - - info->mtd.name = "OneNAND simulator"; - info->mtd.priv = &info->onenand; - info->mtd.owner = THIS_MODULE; - - if (onenand_scan(&info->mtd, 1)) { - flash_exit(&info->flash); - kfree(ffchars); - kfree(info); - return -ENXIO; - } - - add_mtd_partitions(&info->mtd, info->parts, ARRAY_SIZE(os_partitions)); - - return 0; -} - -static void __exit onenand_sim_exit(void) -{ - struct onenand_chip *this = info->mtd.priv; - struct onenand_flash *flash = this->priv; - - onenand_release(&info->mtd); - flash_exit(flash); - kfree(ffchars); - kfree(info); -} - -module_init(onenand_sim_init); -module_exit(onenand_sim_exit); - -MODULE_AUTHOR("Kyungmin Park "); -MODULE_DESCRIPTION("The OneNAND flash simulator"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/olpc/files/drivers/video/geode/geode_regs.h b/target/linux/olpc/files/drivers/video/geode/geode_regs.h deleted file mode 100644 index 9e75505a88..0000000000 --- a/target/linux/olpc/files/drivers/video/geode/geode_regs.h +++ /dev/null @@ -1,242 +0,0 @@ -/* This header file defines the registers and suspend/resume - structures for the Geode GX and LX. The lxfb driver defines - _GEODELX_ before including this file, which will unlock the - extra registers that are only valid for LX. -*/ - -#ifndef _GEODE_REGS_H_ -#define _GEODE_REGS_H_ - -/* MSRs */ - -#define GX_VP_MSR_PAD_SELECT 0xC0002011 -#define LX_VP_MSR_PAD_SELECT 0x48000011 - -#define GEODE_MSR_GLCP_DOTPLL 0x4c000015 - -#define GLCP_DOTPLL_RESET (1 << 0) -#define GLCP_DOTPLL_BYPASS (1 << 15) -#define GLCP_DOTPLL_HALFPIX (1 << 24) -#define GLCP_DOTPLL_LOCK (1 << 25) - -/* Registers */ -#define VP_FP_START 0x400 - - -#ifdef _GEODELX_ - -#define GP_REG_SIZE 0x7C -#define DC_REG_SIZE 0xF0 -#define VP_REG_SIZE 0x158 -#define FP_REG_SIZE 0x70 - -#else - -#define GP_REG_SIZE 0x50 -#define DC_REG_SIZE 0x90 -#define VP_REG_SIZE 0x138 -#define FP_REG_SIZE 0x70 - -#endif - -#define DC_PAL_SIZE 0x105 - -struct geoderegs { - - struct { - u64 padsel; - u64 dotpll; - -#ifdef _GEODELX_ - u64 dfglcfg; - u64 dcspare; -#else - u64 rstpll; -#endif - } msr; - - union { - unsigned char b[GP_REG_SIZE]; - struct { - u32 dst_offset; /* 0x00 */ - u32 src_offset; /* 0x04 */ - u32 stride; /* 0x08 */ - u32 wid_height; /* 0x0C */ - u32 src_color_fg; /* 0x10 */ - u32 src_color_bg; /* 0x14 */ - u32 pat_color_0; /* 0x18 */ - u32 pat_color_1; /* 0x1C */ - u32 pat_color_2; /* 0x20 */ - u32 pat_color_3; /* 0x24 */ - u32 pat_color_4; /* 0x28 */ - u32 pat_color_5; /* 0x2C */ - u32 pat_data_0; /* 0x30 */ - u32 pat_data_1; /* 0x34 */ - u32 raster_mode; /* 0x38 */ - u32 vector_mode; /* 0x3C */ - u32 blt_mode; /* 0x40 */ - u32 blit_status; /* 0x4C */ - u32 hst_src; /* 0x48 */ - u32 base_offset; /* 0x4C */ - -#ifdef _GEODELX_ - u32 cmd_top; /* 0x50 */ - u32 cmd_bot; /* 0x54 */ - u32 cmd_read; /* 0x58 */ - u32 cmd_write; /* 0x5C */ - u32 ch3_offset; /* 0x60 */ - u32 ch3_mode_str; /* 0x64 */ - u32 ch3_width; /* 0x68 */ - u32 ch3_hsrc; /* 0x6C */ - u32 lut_index; /* 0x70 */ - u32 lut_data; /* 0x74 */ - u32 int_cntrl; /* 0x78 */ -#endif - } r; - } gp; - - union { - unsigned char b[DC_REG_SIZE]; - - struct { - u32 unlock; /* 0x00 */ - u32 gcfg; /* 0x04 */ - u32 dcfg; /* 0x08 */ - u32 arb; /* 0x0C */ - u32 fb_st_offset; /* 0x10 */ - u32 cb_st_offset; /* 0x14 */ - u32 curs_st_offset; /* 0x18 */ - u32 icon_st_offset; /* 0x1C */ - u32 vid_y_st_offset; /* 0x20 */ - u32 vid_u_st_offset; /* 0x24 */ - u32 vid_v_st_offset; /* 0x28 */ - u32 dctop; /* 0x2c */ - u32 line_size; /* 0x30 */ - u32 gfx_pitch; /* 0x34 */ - u32 vid_yuv_pitch; /* 0x38 */ - u32 rsvd2; /* 0x3C */ - u32 h_active_timing; /* 0x40 */ - u32 h_blank_timing; /* 0x44 */ - u32 h_sync_timing; /* 0x48 */ - u32 rsvd3; /* 0x4C */ - u32 v_active_timing; /* 0x50 */ - u32 v_blank_timing; /* 0x54 */ - u32 v_sync_timing; /* 0x58 */ - u32 fbactive; /* 0x5C */ - u32 dc_cursor_x; /* 0x60 */ - u32 dc_cursor_y; /* 0x64 */ - u32 dc_icon_x; /* 0x68 */ - u32 dc_line_cnt; /* 0x6C */ - u32 rsvd5; /* 0x70 - palette address */ - u32 rsvd6; /* 0x74 - palette data */ - u32 dfifo_diag; /* 0x78 */ - u32 cfifo_diag; /* 0x7C */ - u32 dc_vid_ds_delta; /* 0x80 */ - u32 gliu0_mem_offset; /* 0x84 */ - u32 dv_ctl; /* 0x88 - added by LX */ - u32 dv_acc; /* 0x8C */ - -#ifdef _GEODELX_ - u32 gfx_scale; - u32 irq_filt_ctl; - u32 filt_coeff1; - u32 filt_coeff2; - u32 vbi_event_ctl; - u32 vbi_odd_ctl; - u32 vbi_hor; - u32 vbi_ln_odd; - u32 vbi_ln_event; - u32 vbi_pitch; - u32 clr_key; - u32 clr_key_mask; - u32 clr_key_x; - u32 clr_key_y; - u32 irq; - u32 rsvd8; - u32 genlk_ctrl; - u32 vid_even_y_st_offset; /* 0xD8 */ - u32 vid_even_u_st_offset; /* 0xDC */ - u32 vid_even_v_st_offset; /* 0xE0 */ - u32 v_active_even_timing; /* 0xE4 */ - u32 v_blank_even_timing; /* 0xE8 */ - u32 v_sync_even_timing; /* 0xEC */ -#endif - } r; - } dc; - - union { - unsigned char b[VP_REG_SIZE]; - - struct { - u64 vcfg; /* 0x00 */ - u64 dcfg; /* 0x08 */ - u64 vx; /* 0x10 */ - u64 vy; /* 0x18 */ - u64 vs; /* 0x20 */ - u64 vck; /* 0x28 */ - u64 vcm; /* 0x30 */ - u64 rsvd1; /* 0x38 - Gamma address*/ - u64 rsvd2; /* 0x40 - Gamma data*/ - u64 rsvd3; /* 0x48 */ - u64 misc; /* 0x50 */ - u64 ccs; /* 0x58 */ - u64 rsvd4[3]; /* 0x60-0x70 */ - u64 vdc; /* 0x78 */ - u64 vco; /* 0x80 */ - u64 crc; /* 0x88 */ - u64 crc32; /* 0x90 */ - u64 vde; /* 0x98 */ - u64 cck; /* 0xA0 */ - u64 ccm; /* 0xA8 */ - u64 cc1; /* 0xB0 */ - u64 cc2; /* 0xB8 */ - u64 a1x; /* 0xC0 */ - u64 a1y; /* 0xC8 */ - u64 a1c; /* 0xD0 */ - u64 a1t; /* 0xD8 */ - u64 a2x; /* 0xE0 */ - u64 a2y; /* 0xE8 */ - u64 a2c; /* 0xF0 */ - u64 a2t; /* 0xF8 */ - u64 a3x; /* 0x100 */ - u64 a3y; /* 0x108 */ - u64 a3c; /* 0x110 */ - u64 a3t; /* 0x118 */ - u64 vrr; /* 0x120 */ - u64 awt; /* 0x128 */ - u64 vtm; /* 0x130 */ -#ifdef _GEODELX_ - u64 vye; /* 0x138 */ - u64 a1ye; /* 0x140 */ - u32 a2ye; /* 0x148 */ - u32 a3ye; /* 0x150 */ -#endif - } r; - } vp; - - union { - unsigned char b[FP_REG_SIZE]; - - struct { - u64 pt1; /* 0x400 */ - u64 pt2; /* 0x408 */ - u64 pm; /* 0x410 */ - u64 dfc; /* 0x418 */ - u64 blfsr; /* 0x420 */ - u64 rlfsr; /* 0x428 */ - u64 fmi; /* 0x430 */ - u64 fmd; /* 0x438 */ - u64 rsvd; /* 0x440 */ - u64 dca; /* 0x448 */ - u64 dmd; /* 0x450 */ - u64 crc; /* 0x458 */ - u64 fbb; /* 0x460 */ - u64 crc32; /* 0x468 */ - } r; - } fp; - - u32 pal[DC_PAL_SIZE]; - u32 gamma[256]; -}; - -#endif diff --git a/target/linux/olpc/files/drivers/video/geode/suspend_gx.c b/target/linux/olpc/files/drivers/video/geode/suspend_gx.c deleted file mode 100644 index 43c25bea5a..0000000000 --- a/target/linux/olpc/files/drivers/video/geode/suspend_gx.c +++ /dev/null @@ -1,272 +0,0 @@ -#include -#include -#include - -#include "geodefb.h" -#include "video_gx.h" - -void gx_set_dotpll(struct fb_info *info, struct geoderegs *regs) -{ - int timeout = 1000; - - u64 rstpll, dotpll; - - rdmsrl(MSR_GLCP_SYS_RSTPLL, rstpll); - rdmsrl(MSR_GLCP_DOTPLL, dotpll); - - dotpll &= 0x00000000ffffffffull; - dotpll |= regs->msr.dotpll & 0xffffffff00000000ull; - - dotpll |= MSR_GLCP_DOTPLL_DOTRESET; - dotpll &= ~MSR_GLCP_DOTPLL_BYPASS; - - wrmsrl(MSR_GLCP_DOTPLL, dotpll); - - rstpll |= (regs->msr.rstpll & - ( MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 | - MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 | - MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3)); - - wrmsrl(MSR_GLCP_SYS_RSTPLL, rstpll); - dotpll &= ~(MSR_GLCP_DOTPLL_DOTRESET); - wrmsrl(MSR_GLCP_DOTPLL, dotpll); - - do { - rdmsrl(MSR_GLCP_DOTPLL, dotpll); - } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK)); -} - -/* FIXME: Make sure nothing is read to clear */ - -void gx_save_regs(struct fb_info *info, struct geoderegs *regs) -{ - struct geodefb_par *par = info->par; - int i; - - /* Wait for the BLT engine to stop being busy */ - while(readl(par->gp_regs + 0x44) & 0x05); - - rdmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel); - rdmsrl(MSR_GLCP_DOTPLL, regs->msr.dotpll); - rdmsrl(MSR_GLCP_SYS_RSTPLL, regs->msr.rstpll); - - writel(0x4758, par->dc_regs + 0x00); - - memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE); - memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE); - memcpy(regs->vp.b, par->vid_regs, VP_REG_SIZE); - memcpy(regs->fp.b, par->vid_regs + 0x400, FP_REG_SIZE); - - /* Save the palettes */ - writel(0, par->dc_regs + 0x70); - - for(i = 0; i < DC_PAL_SIZE; i++) - regs->pal[i] = readl(par->dc_regs + 0x74); - - writel(0, par->vid_regs + 0x38); - - for(i = 0; i < 0xFF; i++) - regs->gamma[i] = readl(par->vid_regs + 0x40); -} - -void gx_restore_regs(struct fb_info *info, struct geoderegs *regs) -{ - struct geodefb_par *par = info->par; - u32 val, i; - - /* DOTPLL */ - gx_set_dotpll(info, regs); - - /* GP */ - - writel(regs->gp.r.dst_offset, par->gp_regs + 0x00); - writel(regs->gp.r.src_offset, par->gp_regs + 0x04); - writel(regs->gp.r.stride, par->gp_regs + 0x08); - writel(regs->gp.r.wid_height, par->gp_regs + 0x0C); - writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10); - writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14); - writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18); - writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C); - writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20); - writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24); - writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28); - writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C); - writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30); - writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34); - - /* Don't write the raster / vector / blt mode regs */ - /* status register is read only */ - - writel(regs->gp.r.hst_src, par->gp_regs + 0x48); - writel(regs->gp.r.base_offset, par->gp_regs + 0x4c); - - /* DC */ - - /* Write the unlock value */ - writel(0x4758, par->dc_regs + 0x00); - - writel(0, par->dc_regs + 0x70); - - for(i = 0; i < DC_PAL_SIZE; i++) - writel(regs->pal[i], par->dc_regs + 0x74); - - /* Write the gcfg register without the enables */ - writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04); - - /* Write the vcfg register without the enables */ - writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08); - - /* Write the rest of the active registers */ - - writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10); - writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14); - writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18); - writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C); - writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20); - writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24); - writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28); - writel(regs->dc.r.line_size, par->dc_regs + 0x30); - writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34); - writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38); - writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40); - writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44); - writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48); - writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50); - writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54); - writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58); - writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60); - writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64); - writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68); - - /* Don't write the line_cnt or diag registers */ - - writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80); - writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84); - writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C); - - /* VP */ - - /* MSR */ - wrmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel); - - writel(0, par->vid_regs + 0x38); - - for(i = 0; i < 0xFF; i++) - writel((u32) regs->gamma[i], par->vid_regs + 0x40); - - /* Don't enable video yet */ - writel((u32) regs->vp.r.vcfg & ~0x01, par->vid_regs + 0x00); - - /* Don't enable the CRT yet */ - writel((u32) regs->vp.r.dcfg & ~0x0F, par->vid_regs + 0x08); - - /* Write the rest of the VP registers */ - - writel((u32) regs->vp.r.vx, par->vid_regs + 0x10); - writel((u32) regs->vp.r.vy, par->vid_regs + 0x18); - writel((u32) regs->vp.r.vs, par->vid_regs + 0x20); - writel((u32) regs->vp.r.vck, par->vid_regs + 0x28); - writel((u32) regs->vp.r.vcm, par->vid_regs + 0x30); - writel((u32) regs->vp.r.misc, par->vid_regs + 0x50); - writel((u32) regs->vp.r.ccs, par->vid_regs + 0x58); - writel((u32) regs->vp.r.vdc, par->vid_regs + 0x78); - writel((u32) regs->vp.r.vco, par->vid_regs + 0x80); - writel((u32) regs->vp.r.crc, par->vid_regs + 0x88); - writel((u32) regs->vp.r.vde, par->vid_regs + 0x98); - writel((u32) regs->vp.r.cck, par->vid_regs + 0xA0); - writel((u32) regs->vp.r.ccm, par->vid_regs + 0xA8); - writel((u32) regs->vp.r.cc1, par->vid_regs + 0xB0); - writel((u32) regs->vp.r.cc2, par->vid_regs + 0xB8); - writel((u32) regs->vp.r.a1x, par->vid_regs + 0xC0); - writel((u32) regs->vp.r.a1y, par->vid_regs + 0xC8); - writel((u32) regs->vp.r.a1c, par->vid_regs + 0xD0); - writel((u32) regs->vp.r.a1t, par->vid_regs + 0xD8); - writel((u32) regs->vp.r.a2x, par->vid_regs + 0xE0); - writel((u32) regs->vp.r.a2y, par->vid_regs + 0xE8); - writel((u32) regs->vp.r.a2c, par->vid_regs + 0xF0); - writel((u32) regs->vp.r.a2t, par->vid_regs + 0xF8); - writel((u32) regs->vp.r.a3x, par->vid_regs + 0x100); - writel((u32) regs->vp.r.a3y, par->vid_regs + 0x108); - writel((u32) regs->vp.r.a3c, par->vid_regs + 0x110); - writel((u32) regs->vp.r.a3t, par->vid_regs + 0x118); - writel((u32) regs->vp.r.vrr, par->vid_regs + 0x120); - - - /* FP registers */ - - writel((u32) regs->fp.r.pt1, par->vid_regs + 0x400); - writel((u32) regs->fp.r.pt2, par->vid_regs + 0x408); - - writel((u32) regs->fp.r.dfc, par->vid_regs + 0x418); - writel(regs->fp.r.blfsr, par->vid_regs + 0x420); - writel(regs->fp.r.rlfsr, par->vid_regs + 0x428); - writel(regs->fp.r.fmi, par->vid_regs + 0x430); - writel(regs->fp.r.fmd, par->vid_regs + 0x438); - writel(regs->fp.r.dca, par->vid_regs + 0x448); - writel(regs->fp.r.dmd, par->vid_regs + 0x450); - writel(regs->fp.r.crc, par->vid_regs + 0x458); - writel(regs->fp.r.fbb, par->vid_regs + 0x460); - - /* Final enables */ - - val = readl(par->vid_regs + 0x410); - - /* Control the panel */ - if (regs->fp.r.pm & (1 << 24)) { - - if (!(val & 0x09)) - writel(regs->fp.r.pm, par->vid_regs + 0x410); - } - else { - if (!(val & 0x05)) - writel(regs->fp.r.pm, par->vid_regs + 0x410); - } - - /* Turn everything on */ - - writel(regs->dc.r.gcfg, par->dc_regs + 0x04); - writel((u32) regs->vp.r.vcfg, par->vid_regs + 0x00); - writel((u32) regs->vp.r.dcfg, par->vid_regs + 0x08); - writel(regs->dc.r.dcfg, par->dc_regs + 0x08); -} - - -#ifdef DEBUG - -void dump_regs(struct fb_info *info, int mode) { - - struct geodefb_par *par = info->par; - u32 val; - int i; - - if (mode == 0) { - for(i = 0; i < GP_REG_SIZE; i += 4) { - val = readl(par->gp_regs + i); - } - } - - if (mode == 1) { - writel(0x4758, par->dc_regs + 0x00); - - for(i = 0; i < DC_REG_SIZE; i += 4) { - val = readl(par->dc_regs + i); - printk("DC%x: %x\n", i, val); - } - } - - if (mode == 2) { - for(i = 0; i < VP_REG_SIZE; i += 8) { - val = readl(par->vid_regs + i); - printk("VP%x: %x\n", i, val); - } - } - - if (mode == 3) { - for(i = 0; i < FP_REG_SIZE; i += 8) { - val = readl(par->vid_regs + 0x400 + i); - printk("FP%x: %x\n", i, val); - } - } -} - -#endif diff --git a/target/linux/olpc/files/drivers/video/olpc_dcon.c b/target/linux/olpc/files/drivers/video/olpc_dcon.c deleted file mode 100644 index d4ef138676..0000000000 --- a/target/linux/olpc/files/drivers/video/olpc_dcon.c +++ /dev/null @@ -1,824 +0,0 @@ -/* - * Mainly by David Woodhouse, somewhat modified by Jordan Crouse - * - * Copyright © 2006-2007 Red Hat, Inc. - * Copyright © 2006-2007 Advanced Micro Devices, Inc. - * - * This program is free software. You can redistribute it and/or - * modify it under the terms of version 2 of the GNU General Public - * License as published by the Free Software Foundation. - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "olpc_dcon.h" - -/* Module definitions */ - -static int resumeline = 898; -module_param(resumeline, int, 0444); - -static int noinit; -module_param(noinit, int, 0444); - -/* Default off since it doesn't work on DCON ASIC in B-test OLPC board */ -static int useaa = 1; -module_param(useaa, int, 0444); - -/* I2C structures */ - -static struct i2c_driver dcon_driver; -static struct i2c_client *dcon_client; - -/* Platform devices */ -static struct platform_device *dcon_device; - -/* Backlight device */ -static struct backlight_device *dcon_bl_dev; - -/* Base address of the GPIO registers */ -static unsigned long gpio_base; - -static struct fb_info *fbinfo; - -/* Current source, initialized at probe time */ -static int dcon_source; - -/* Desired source */ -static int dcon_pending; - -/* Current output type */ -static int dcon_output = DCON_OUTPUT_COLOR; - -/* Current sleep status (not yet implemented) */ -static int dcon_sleep_val = DCON_ACTIVE; - -/* Shadow register for the DCON_REG_MODE register */ -static unsigned short dcon_disp_mode; - -/* Variables used during switches */ -static int dcon_switched; - -static DECLARE_WAIT_QUEUE_HEAD(dcon_wait_queue); - -static unsigned short normal_i2c[] = { 0x0D, I2C_CLIENT_END }; -I2C_CLIENT_INSMOD; - -#define dcon_write(reg,val) i2c_smbus_write_word_data(dcon_client,reg,val) -#define dcon_read(reg) i2c_smbus_read_word_data(dcon_client,reg) - -/* The current backlight value - this saves us some smbus traffic */ -static int bl_val = -1; - -/* ===== API functions - these are called by a variety of users ==== */ - -/* Backlight notes - turning off the backlight enable bit in the DCON - * doesn't save us any power over just pushing the BL to zero, so we - * don't use that bit in this code. - */ - -static int dcon_get_backlight(void) -{ - if (dcon_client == NULL) - return 0; - - if (bl_val == -1) - bl_val = dcon_read(DCON_REG_BRIGHT) & 0x0F; - - return bl_val; -} - -static void dcon_set_backlight(int level) -{ - if (dcon_client == NULL) - return; - - if (bl_val == (level & 0x0F)) - return; - - bl_val = level & 0x0F; - dcon_write(DCON_REG_BRIGHT, bl_val); - - /* Purposely turn off the backlight when we go to level 0 */ - - if (bl_val == 0) { - dcon_disp_mode &= ~MODE_BL_ENABLE; - dcon_write(DCON_REG_MODE, dcon_disp_mode); - } - else if (!(dcon_disp_mode & MODE_BL_ENABLE)) { - dcon_disp_mode |= MODE_BL_ENABLE; - dcon_write(DCON_REG_MODE, dcon_disp_mode); - } -} - -/* Set the output type to either color or mono */ - -static int dcon_set_output(int arg) -{ - if (dcon_output == arg) - return 0; - - dcon_output = arg; - - if (arg == DCON_OUTPUT_MONO) { - dcon_disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA); - dcon_disp_mode |= MODE_MONO_LUMA; - } - else { - dcon_disp_mode &= ~(MODE_MONO_LUMA); - dcon_disp_mode |= MODE_CSWIZZLE; - if (useaa) - dcon_disp_mode |= MODE_COL_AA; - } - - dcon_write(DCON_REG_MODE, dcon_disp_mode); - return 0; -} - -/* For now, this will be really stupid - we need to address how - * DCONLOAD works in a sleep and account for it accordingly - */ - -static void dcon_sleep(int state) -{ - /* Turn off the backlight and put the DCON to sleep */ - - if (state == dcon_sleep_val) - return; - - if (state == DCON_SLEEP) { - dcon_disp_mode &= ~MODE_BL_ENABLE; - dcon_disp_mode |= MODE_SLEEP; - } - else { - /* Only re-enable the backlight if the backlight value is set */ - - if (bl_val != 0) - dcon_disp_mode |= MODE_BL_ENABLE; - - dcon_disp_mode &= ~MODE_SLEEP; - } - - dcon_sleep_val = state; - dcon_write(DCON_REG_MODE, dcon_disp_mode); - - /* We should turn off some stuff in the framebuffer - but what? */ -} - -/* Set the source of the display (CPU or DCON) */ - -static void dcon_source_switch(struct work_struct *work) -{ - DECLARE_WAITQUEUE(wait, current); - int source = dcon_pending; - - if (dcon_source == source) - return; - - dcon_switched = 0; - - switch (source) { - case DCON_SOURCE_CPU: - - /* Enable the scanline interrupt bit */ - if (dcon_write(DCON_REG_MODE, dcon_disp_mode | MODE_SCAN_INT)) - printk(KERN_ERR "olpc-dcon: couldn't enable scanline interrupt!\n"); - else { - /* Wait up to one second for the scanline interrupt */ - wait_event_timeout(dcon_wait_queue, dcon_switched == 1, HZ); - } - - if (!dcon_switched) - printk(KERN_ERR "olpc-dcon: Timeout entering CPU mode; expect a screen glitch.\n"); - - /* - * Ideally we'd like to disable interrupts here so that the - * fb_powerup and DCON turn on happen at a known time value; - * however, we can't do that right now with fb_set_suspend - * messing with semaphores. - * - * For now, we just hope.. - */ - if (fb_powerup(fbinfo)) { - printk(KERN_ERR "olpc-dcon: Failed to enter CPU mode\n"); - dcon_pending = DCON_SOURCE_DCON; - return; - } - - /* And turn off the DCON */ - outl(1<<11, gpio_base + GPIOx_OUT_VAL); - - /* Turn off the scanline interrupt */ - if (dcon_write(DCON_REG_MODE, dcon_disp_mode)) - printk(KERN_ERR "olpc-dcon: couldn't disable scanline interrupt!\n"); - - printk(KERN_INFO "olpc-dcon: The CPU has control\n"); - break; - case DCON_SOURCE_DCON: - { - int t; - - add_wait_queue(&dcon_wait_queue, &wait); - set_current_state(TASK_UNINTERRUPTIBLE); - - /* Clear GPIO11 (DCONLOAD) - this implies that the DCON is in - control */ - - outl(1 << (11 + 16), gpio_base + GPIOx_OUT_VAL); - - t = schedule_timeout(HZ/2); - remove_wait_queue(&dcon_wait_queue, &wait); - set_current_state(TASK_RUNNING); - - if (!dcon_switched) - printk(KERN_ERR "olpc-dcon: Timeout entering DCON mode; expect a screen glitch.\n"); - - /* Turn off the graphics engine completely */ - fb_powerdown(fbinfo); - - printk(KERN_INFO "olpc-dcon: The DCON has control\n"); - break; - } - default: - BUG(); - } - - dcon_source = source; -} - -static DECLARE_WORK(dcon_work, dcon_source_switch); - -static int dcon_set_source(int arg) -{ - if (arg != DCON_SOURCE_CPU && arg != DCON_SOURCE_DCON) - return -EINVAL; - - if (dcon_pending == arg) - return 0; - - dcon_pending = arg; - if ((dcon_source != arg) && !work_pending(&dcon_work)) - schedule_work(&dcon_work); - - return 0; -} - -static int dcon_set_source_sync(int arg) -{ - int ret = dcon_set_source(arg); - if (!ret) - flush_scheduled_work(); - return ret; -} - -static int dconbl_set(struct backlight_device *dev) { - - int level = dev->props.brightness; - - if (dev->props.power != FB_BLANK_UNBLANK) - level = 0; - - dcon_set_backlight(level); - return 0; -} - -static int dconbl_get(struct backlight_device *dev) { - return dcon_get_backlight(); -} - -static ssize_t dcon_mode_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%4.4X\n", dcon_disp_mode); -} - -static ssize_t dcon_sleep_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n", dcon_sleep_val); -} - -static ssize_t /* __deprecated */ dcon_source_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n"); - return sprintf(buf, "%d\n", dcon_source); -} - -static ssize_t dcon_freeze_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n", dcon_source == DCON_SOURCE_DCON ? 1 : 0); -} - -static ssize_t dcon_output_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n", dcon_output); -} - -static ssize_t dcon_resumeline_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n", resumeline); -} - -static int _strtoul(const char *buf, int len, unsigned int *val) -{ - - char *endp; - unsigned int output = simple_strtoul(buf, &endp, 0); - int size = endp - buf; - - if (*endp && isspace(*endp)) - size++; - - if (size != len) - return -EINVAL; - - *val = output; - return 0; -} - -static ssize_t dcon_output_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - int output; - int rc = -EINVAL; - - if (_strtoul(buf, count, &output)) - return -EINVAL; - - if (output == DCON_OUTPUT_COLOR || output == DCON_OUTPUT_MONO) { - dcon_set_output(output); - rc = count; - } - - return rc; -} - -static ssize_t /* __deprecated */ dcon_source_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - int output; - int rc = -EINVAL; - - printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n"); - if (_strtoul(buf, count, &output)) - return -EINVAL; - - dcon_set_source(output); - rc = count; - - return rc; -} - -static ssize_t dcon_freeze_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - int output; - int rc = -EINVAL; - - if (_strtoul(buf, count, &output)) - return rc; - - dcon_set_source(output ? DCON_SOURCE_DCON : DCON_SOURCE_CPU); - rc = count; - - return rc; -} - -static ssize_t dcon_resumeline_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - int rl; - int rc = -EINVAL; - - if (_strtoul(buf, count, &rl)) - return rc; - - resumeline = rl; - dcon_write(DCON_REG_SCAN_INT, resumeline); - rc = count; - - return rc; -} - -static ssize_t dcon_sleep_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - int output; - - if (_strtoul(buf, count, &output)) - return -EINVAL; - - dcon_sleep(output ? DCON_SLEEP : DCON_ACTIVE); - return count; -} - -static struct device_attribute dcon_device_files[] = { - __ATTR(mode, 0444, dcon_mode_show, NULL), - __ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store), - __ATTR(source, 0644, dcon_source_show, dcon_source_store), - __ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store), - __ATTR(output, 0644, dcon_output_show, dcon_output_store), - __ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store), -}; - -static struct backlight_ops dcon_bl_ops = { - .get_brightness = dconbl_get, - .update_status = dconbl_set -}; - -/* List of GPIOs that we care about: - (in) GPIO12 -- DCONBLNK - (in) GPIO[56] -- DCONSTAT[01] - (out) GPIO11 -- DCONLOAD -*/ - -#define IN_GPIOS ((1<<5) | (1<<6) | (1<<7) | (1<<12)) -#define OUT_GPIOS (1<<11) - -static irqreturn_t dcon_interrupt(int, void *); - -static int dcon_request_irq(void) -{ - unsigned long lo, hi; - unsigned char lob; - - rdmsr(MSR_LBAR_GPIO, lo, hi); - - /* Check the mask and whether GPIO is enabled (sanity check) */ - if (hi != 0x0000f001) { - printk(KERN_ERR "GPIO not enabled -- cannot use DCON\n"); - return -ENODEV; - } - - /* Mask off the IO base address */ - gpio_base = lo & 0x0000ff00; - - /* Turn off the event enable for GPIO7 just to be safe */ - outl(1 << (16+7), gpio_base + GPIOx_EVNT_EN); - - /* Set the directions for the GPIO pins */ - outl(OUT_GPIOS | (IN_GPIOS << 16), gpio_base + GPIOx_OUT_EN); - outl(IN_GPIOS | (OUT_GPIOS << 16), gpio_base + GPIOx_IN_EN); - - /* Set up the interrupt mappings */ - - /* Set the IRQ to pair 2 */ - geode_gpio_event_irq(OLPC_GPIO_DCON_IRQ, 2); - - /* Enable group 2 to trigger the DCON interrupt */ - geode_gpio_set_irq(2, DCON_IRQ); - - /* Select edge level for interrupt (in PIC) */ - - lob = inb(0x4d0); - lob &= ~(1 << DCON_IRQ); - outb(lob, 0x4d0); - - /* Register the interupt handler */ - if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver)) - return -EIO; - - /* Clear INV_EN for GPIO7 (DCONIRQ) */ - outl((1<<(16+7)), gpio_base + GPIOx_INV_EN); - - /* Enable filter for GPIO12 (DCONBLANK) */ - outl(1<<(12), gpio_base + GPIOx_IN_FLTR_EN); - - /* Disable filter for GPIO7 */ - outl(1<<(16+7), gpio_base + GPIOx_IN_FLTR_EN); - - /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ - - outl(1<<(16+7), gpio_base + GPIOx_EVNTCNT_EN); - outl(1<<(16+12), gpio_base + GPIOx_EVNTCNT_EN); - - /* Add GPIO12 to the Filter Event Pair #7 */ - outb(12, gpio_base + GPIO_FE7_SEL); - - /* Turn off negative Edge Enable for GPIO12 */ - outl(1<<(16+12), gpio_base + GPIOx_NEGEDGE_EN); - - /* Enable negative Edge Enable for GPIO7 */ - outl(1<<7, gpio_base + GPIOx_NEGEDGE_EN); - - /* Zero the filter amount for Filter Event Pair #7 */ - outw(0, gpio_base + GPIO_FLT7_AMNT); - - /* Clear the negative edge status for GPIO7 and GPIO12 */ - outl((1<<7) | (1<<12), gpio_base+0x4c); - - /* FIXME: Clear the posiitive status as well, just to be sure */ - outl((1<<7) | (1<<12), gpio_base+0x48); - - /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ - outl((1<<(7))|(1<<12), gpio_base + GPIOx_EVNT_EN); - - /* Determine the current state by reading the GPIO bit */ - /* Earlier stages of the boot process have established the state */ - dcon_source = inl(gpio_base + GPIOx_OUT_VAL) & (1<<11) - ? DCON_SOURCE_CPU - : DCON_SOURCE_DCON; - dcon_pending = dcon_source; - - return 0; -} - -static int dcon_reboot_notify(struct notifier_block *nb, unsigned long foo, void *bar) -{ - if (dcon_client == NULL) - return 0; - - /* Turn off the DCON. Entirely. */ - dcon_write(DCON_REG_MODE, 0x39); - dcon_write(DCON_REG_MODE, 0x32); - return 0; -} - -static int dcon_conswitch_notify(struct notifier_block *nb, - unsigned long mode, void *dummy) -{ - if (mode == CONSOLE_EVENT_SWITCH_TEXT) - dcon_sleep(DCON_ACTIVE); - - return 0; -} - -static struct notifier_block dcon_nb = { - .notifier_call = dcon_reboot_notify, - .priority = -1, -}; - -static struct notifier_block dcon_console_nb = { - .notifier_call = dcon_conswitch_notify, - .priority = -1, -}; - -static int dcon_probe(struct i2c_adapter *adap, int addr, int kind) -{ - struct i2c_client *client; - uint16_t ver; - int rc, i; - - if (!olpc_has_dcon()) { - printk("olpc-dcon: No DCON is attached.\n"); - return -ENODEV; - } - - if (num_registered_fb >= 1) - fbinfo = registered_fb[0]; - - if (adap->id != I2C_HW_SMBUS_SCX200) { - printk(KERN_ERR "olpc-dcon: Invalid I2C bus (%d not %d)\n", - adap->id, I2C_HW_SMBUS_SCX200); - return -ENXIO; - } - - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - - strncpy(client->name, "OLPC-DCON", I2C_NAME_SIZE); - client->addr = addr; - client->adapter = adap; - client->driver = &dcon_driver; - - if ((rc = i2c_attach_client(client)) != 0) { - printk(KERN_ERR "olpc-dcon: Unable to attach the I2C client.\n"); - goto eclient; - } - - ver = i2c_smbus_read_word_data(client, DCON_REG_ID); - - if ((ver >> 8) != 0xDC) { - printk(KERN_ERR "olpc-dcon: DCON ID not 0xDCxx: 0x%04x instead.\n", ver); - rc = -ENXIO; - goto ei2c; - } - - if ((rc = dcon_request_irq())) { - printk(KERN_ERR "olpc-dcon: Unable to grab IRQ.\n"); - goto ei2c; - } - - if (ver < 0xdc02 && !noinit) { - /* Initialize the DCON registers */ - - /* Start with work-arounds for DCON ASIC */ - i2c_smbus_write_word_data(client, 0x4b, 0x00cc); - i2c_smbus_write_word_data(client, 0x4b, 0x00cc); - i2c_smbus_write_word_data(client, 0x4b, 0x00cc); - i2c_smbus_write_word_data(client, 0x0b, 0x007a); - i2c_smbus_write_word_data(client, 0x36, 0x025c); - i2c_smbus_write_word_data(client, 0x37, 0x025e); - - /* Initialise SDRAM */ - - i2c_smbus_write_word_data(client, 0x3b, 0x002b); - i2c_smbus_write_word_data(client, 0x41, 0x0101); - i2c_smbus_write_word_data(client, 0x42, 0x0101); - } - - /* Colour swizzle, AA, no passthrough, backlight */ - - dcon_disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE | MODE_CSWIZZLE; - if (useaa) - dcon_disp_mode |= MODE_COL_AA; - i2c_smbus_write_word_data(client, DCON_REG_MODE, dcon_disp_mode); - - - /* Set the scanline to interrupt on during resume */ - - i2c_smbus_write_word_data(client, DCON_REG_SCAN_INT, resumeline); - - /* Add the DCON device */ - - dcon_device = platform_device_alloc("dcon", -1); - - if (dcon_device == NULL) { - printk(KERN_ERR "dcon: Unable to create the DCON device\n"); - rc = -ENOMEM; - goto eirq; - } - - if ((rc = platform_device_add(dcon_device))) { - printk(KERN_ERR "dcon: Unable to add the DCON device\n"); - goto edev; - } - - for(i = 0; i < ARRAY_SIZE(dcon_device_files); i++) - device_create_file(&dcon_device->dev, &dcon_device_files[i]); - - /* Add the backlight device for the DCON */ - - dcon_client = client; - - dcon_bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev, - NULL, &dcon_bl_ops); - - if (IS_ERR(dcon_bl_dev)) { - printk(KERN_INFO "Could not register the backlight device for the DCON (%ld)\n", PTR_ERR(dcon_bl_dev)); - dcon_bl_dev = NULL; - } - else { - dcon_bl_dev->props.max_brightness = 15; - dcon_bl_dev->props.power = FB_BLANK_UNBLANK; - dcon_bl_dev->props.brightness = dcon_get_backlight(); - - backlight_update_status(dcon_bl_dev); - } - - register_reboot_notifier(&dcon_nb); - console_event_register(&dcon_console_nb); - - printk(KERN_INFO "olpc-dcon: Discovered DCON version %x\n", ver & 0xFF); - - return 0; - - edev: - platform_device_unregister(dcon_device); - dcon_device = NULL; - eirq: - free_irq(DCON_IRQ, &dcon_driver); - ei2c: - i2c_detach_client(client); - eclient: - kfree(client); - - return rc; -} - -static int dcon_attach(struct i2c_adapter *adap) -{ - int ret; - - ret = i2c_probe(adap, &addr_data, dcon_probe); - - if (dcon_client == NULL) - printk(KERN_ERR "olpc-dcon: No DCON found on SMBus\n"); - - return ret; -} - -static int dcon_detach(struct i2c_client *client) -{ - int rc; - dcon_client = NULL; - - unregister_reboot_notifier(&dcon_nb); - console_event_unregister(&dcon_console_nb); - - free_irq(DCON_IRQ, &dcon_driver); - - if ((rc = i2c_detach_client(client)) == 0) - kfree(i2c_get_clientdata(client)); - - if (dcon_bl_dev != NULL) - backlight_device_unregister(dcon_bl_dev); - - if (dcon_device != NULL) - platform_device_unregister(dcon_device); - cancel_work_sync(&dcon_work); - - return rc; -} - - -#ifdef CONFIG_PM -static int dcon_suspend(struct i2c_client *client, pm_message_t state) -{ - if (dcon_sleep_val != DCON_ACTIVE) - return 0; - - /* Set up the DCON to have the source */ - return dcon_set_source_sync(DCON_SOURCE_DCON); -} - -static int dcon_resume(struct i2c_client *client) -{ - int x; - if (dcon_sleep_val != DCON_ACTIVE) - return 0; - - /* HACK: ensure the bus is stable */ - do { - x = dcon_read(DCON_REG_ID); - } while (x < 0); - - return dcon_set_source(DCON_SOURCE_CPU); -} - -#endif - -static irqreturn_t dcon_interrupt(int irq, void *id) -{ - int status = inl(gpio_base + GPIOx_READ_BACK) >> 5; - - /* Clear the negative edge status for GPIO7 */ - outl(1 << 7, gpio_base + GPIOx_NEGEDGE_STS); - - switch (status & 3) { - case 3: - printk(KERN_DEBUG "olpc-dcon: DCONLOAD_MISSED interrupt\n"); - break; - case 2: /* switch to DCON mode */ - case 1: /* switch to CPU mode */ - dcon_switched = 1; - wake_up(&dcon_wait_queue); - break; - case 0: - printk(KERN_DEBUG "olpc-dcon: scanline interrupt w/CPU\n"); - } - - return IRQ_HANDLED; -} - -static struct i2c_driver dcon_driver = { - .driver = { - .name = "OLPC-DCON", - }, - .id = I2C_DRIVERID_DCON, - .attach_adapter = dcon_attach, - .detach_client = dcon_detach, -#ifdef CONFIG_PM - .suspend = dcon_suspend, - .resume = dcon_resume, -#endif -}; - - -static int __init olpc_dcon_init(void) -{ - i2c_add_driver(&dcon_driver); - return 0; -} - -static void __exit olpc_dcon_exit(void) -{ - i2c_del_driver(&dcon_driver); -} - -module_init(olpc_dcon_init); -module_exit(olpc_dcon_exit); - -MODULE_LICENSE("GPL"); diff --git a/target/linux/olpc/files/drivers/video/olpc_dcon.h b/target/linux/olpc/files/drivers/video/olpc_dcon.h deleted file mode 100644 index 6453ca4ba0..0000000000 --- a/target/linux/olpc/files/drivers/video/olpc_dcon.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef OLPC_DCON_H_ -#define OLPC_DCON_H_ - -/* DCON registers */ - -#define DCON_REG_ID 0 -#define DCON_REG_MODE 1 - -#define MODE_PASSTHRU (1<<0) -#define MODE_SLEEP (1<<1) -#define MODE_SLEEP_AUTO (1<<2) -#define MODE_BL_ENABLE (1<<3) -#define MODE_BLANK (1<<4) -#define MODE_CSWIZZLE (1<<5) -#define MODE_COL_AA (1<<6) -#define MODE_MONO_LUMA (1<<7) -#define MODE_SCAN_INT (1<<8) -#define MODE_CLOCKDIV (1<<9) -#define MODE_DEBUG (1<<14) -#define MODE_SELFTEST (1<<15) - -#define DCON_REG_HRES 2 -#define DCON_REG_HTOTAL 3 -#define DCON_REG_HSYNC_WIDTH 4 -#define DCON_REG_VRES 5 -#define DCON_REG_VTOTAL 6 -#define DCON_REG_VSYNC_WIDTH 7 -#define DCON_REG_TIMEOUT 8 -#define DCON_REG_SCAN_INT 9 -#define DCON_REG_BRIGHT 10 - -/* GPIO registers (CS5536) */ - -#define MSR_LBAR_GPIO 0x5140000C - -#define GPIOx_OUT_VAL 0x00 -#define GPIOx_OUT_EN 0x04 -#define GPIOx_IN_EN 0x20 -#define GPIOx_INV_EN 0x24 -#define GPIOx_IN_FLTR_EN 0x28 -#define GPIOx_EVNTCNT_EN 0x2C -#define GPIOx_READ_BACK 0x30 -#define GPIOx_EVNT_EN 0x38 -#define GPIOx_NEGEDGE_EN 0x44 -#define GPIOx_NEGEDGE_STS 0x4C -#define GPIO_FLT7_AMNT 0xD8 -#define GPIO_MAP_X 0xE0 -#define GPIO_MAP_Y 0xE4 -#define GPIO_FE7_SEL 0xF7 - - -/* Status values */ - -#define DCONSTAT_SCANINT 0 -#define DCONSTAT_SCANINT_DCON 1 -#define DCONSTAT_DISPLAYLOAD 2 -#define DCONSTAT_MISSED 3 - -/* Source values */ - -#define DCON_SOURCE_DCON 0 -#define DCON_SOURCE_CPU 1 - -/* Output values */ -#define DCON_OUTPUT_COLOR 0 -#define DCON_OUTPUT_MONO 1 - -/* Sleep values */ -#define DCON_ACTIVE 0 -#define DCON_SLEEP 1 - -/* Interrupt */ -#define DCON_IRQ 6 - -#endif diff --git a/target/linux/olpc/files/include/asm-i386/ofw.h b/target/linux/olpc/files/include/asm-i386/ofw.h deleted file mode 100644 index 79b08b164f..0000000000 --- a/target/linux/olpc/files/include/asm-i386/ofw.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Definitions for Open Firmware client interface on 32-bit system. - * OF Cell size is 4. Integer properties are encoded big endian, - * as with all OF implementations. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _OFW_H -#define _OFW_H - -extern int ofw(char *, int, int, ...); - -#endif diff --git a/target/linux/olpc/files/include/asm-i386/olpc.h b/target/linux/olpc/files/include/asm-i386/olpc.h deleted file mode 100644 index 26bc1a8d3f..0000000000 --- a/target/linux/olpc/files/include/asm-i386/olpc.h +++ /dev/null @@ -1,116 +0,0 @@ -/* OLPC machine specific definitions */ - -#ifndef ASM_OLPC_H_ -#define ASM_OLPC_H_ - -#include - -struct olpc_platform_t { - int flags; - int boardrev; - int ecver; -}; - -#define OLPC_F_PRESENT 0x01 -#define OLPC_F_DCON 0x02 -#define OLPC_F_VSA 0x04 - -enum -{ - OLPC_REV_A = 0, - - OLPC_REV_PRE_B1, - OLPC_REV_B1, - OLPC_REV_PRE_B2, - OLPC_REV_B2, - OLPC_REV_PRE_B3, - OLPC_REV_B3, - OLPC_REV_B4, - OLPC_REV_C1, - OLPC_REV_R1, - OLPC_REV_UNKNOWN /* this should always come last */ -}; - -#ifndef CONFIG_OLPC - -static inline int machine_is_olpc(void) { return 0; } -static inline int olpc_has_dcon(void) { return 0; } -static inline int olpc_has_vsa(void) { return 0; } -static inline int olpc_get_rev(void) { return OLPC_REV_UNKNOWN; } - -#else - -extern struct olpc_platform_t olpc_platform_info; - -static inline int -machine_is_olpc(void) -{ - return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0; -} - -static inline int -olpc_has_dcon(void) -{ - return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0; -} - -static inline int -olpc_has_vsa(void) -{ - return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0; -} - -static inline int -olpc_get_rev(void) -{ - return olpc_platform_info.boardrev; -} - -static inline int -olpc_rev_after(int rev) -{ - return olpc_platform_info.boardrev > rev && - olpc_platform_info.boardrev != OLPC_REV_UNKNOWN; -} - -static inline int -olpc_rev_before(int rev) -{ - return olpc_platform_info.boardrev < rev || - olpc_platform_info.boardrev == OLPC_REV_UNKNOWN; -} - -#endif - -/* EC functions */ - -int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, - unsigned char *outbuf, size_t outlen); - -void olpc_register_battery_callback(void (*f)(unsigned long)); -void olpc_deregister_battery_callback(void); - -/* EC commands and responses */ - -/* SCI source values */ - -#define EC_SCI_SRC_EMPTY 0x00 -#define EC_SCI_SRC_GAME 0x01 -#define EC_SCI_SRC_BATTERY 0x02 -#define EC_SCI_SRC_BATSOC 0x04 -#define EC_SCI_SRC_BATERR 0x08 -#define EC_SCI_SRC_EBOOK 0x10 -#define EC_SCI_SRC_WLAN 0x20 -#define EC_SCI_SRC_ACPWR 0x40 - -/* GPIO assignments */ - -#define OLPC_GPIO_MIC_AC 1 -#define OLPC_GPIO_DCON_IRQ 7 -#define OLPC_GPIO_THRM_ALRM 10 -#define OLPC_GPIO_WORKAUX 24 -#define OLPC_GPIO_LID 26 -#define OLPC_GPIO_ECSCI 27 - -#endif - diff --git a/target/linux/olpc/files/include/asm-i386/prom.h b/target/linux/olpc/files/include/asm-i386/prom.h deleted file mode 100644 index 59d3bddccf..0000000000 --- a/target/linux/olpc/files/include/asm-i386/prom.h +++ /dev/null @@ -1,108 +0,0 @@ -#ifndef _I386_PROM_H -#define _I386_PROM_H -#ifdef __KERNEL__ - - -/* - * Definitions for talking to the Open Firmware PROM on - * Power Macintosh computers. - * - * Copyright (C) 1996-2005 Paul Mackerras. - * - * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. - * Updates for SPARC64 by David S. Miller - * Updates for i386/OLPC by Andres Salomon - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include - -typedef u32 phandle; -typedef u32 ihandle; - -struct property { - char *name; - int length; - void *value; - struct property *next; -}; - -struct device_node { - const char *name; - const char *type; - phandle node; -// phandle linux_phandle; - char *path_component_name; - char *full_name; - - struct property *properties; - struct property *deadprops; /* removed properties */ - struct device_node *parent; - struct device_node *child; - struct device_node *sibling; - struct device_node *next; /* next device of same type */ - struct device_node *allnext; /* next in list of all nodes */ - struct proc_dir_entry *pde; /* this node's proc directory */ - struct kref kref; - unsigned long _flags; - void *data; -}; - -/* flag descriptions */ -#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */ - -#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags) -#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags) - -#define OF_BAD_ADDR ((u64)-1) - -static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de) -{ - dn->pde = de; -} - -extern struct device_node *of_find_node_by_name(struct device_node *from, - const char *name); -#define for_each_node_by_name(dn, name) \ - for (dn = of_find_node_by_name(NULL, name); dn; \ - dn = of_find_node_by_name(dn, name)) -extern struct device_node *of_find_node_by_type(struct device_node *from, - const char *type); -#define for_each_node_by_type(dn, type) \ - for (dn = of_find_node_by_type(NULL, type); dn; \ - dn = of_find_node_by_type(dn, type)) -extern struct device_node *of_find_compatible_node(struct device_node *from, - const char *type, const char *compat); -extern struct device_node *of_find_node_by_path(const char *path); -extern struct device_node *of_find_node_by_phandle(phandle handle); -extern struct device_node *of_get_parent(const struct device_node *node); -extern struct device_node *of_get_next_child(const struct device_node *node, - struct device_node *prev); -extern struct property *of_find_property(const struct device_node *np, - const char *name, - int *lenp); -//extern struct device_node *of_node_get(struct device_node *node); -//extern void of_node_put(struct device_node *node); -extern int of_device_is_compatible(const struct device_node *device, - const char *); -extern const void *of_get_property(const struct device_node *node, - const char *name, - int *lenp); -#define get_property(node,name,lenp) of_get_property(node,name,lenp) -extern int of_set_property(struct device_node *node, const char *name, void *val, int len); -extern int of_getintprop_default(struct device_node *np, - const char *name, - int def); -extern int of_n_addr_cells(struct device_node *np); -extern int of_n_size_cells(struct device_node *np); - -extern void prom_build_devicetree(void); - -#endif /* __KERNEL__ */ -#endif diff --git a/target/linux/olpc/files/include/linux/battery.h b/target/linux/olpc/files/include/linux/battery.h deleted file mode 100644 index 2f856a0d75..0000000000 --- a/target/linux/olpc/files/include/linux/battery.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Driver model for batteries - * - * © 2006 David Woodhouse - * - * Based on LED Class support, by John Lenz and Richard Purdie: - * - * © 2005 John Lenz - * © 2005-2006 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef __LINUX_BATTERY_H__ -#define __LINUX_BATTERY_H__ - -struct device; -struct class_device; - -/* - * Battery Core - */ -#define PWRDEV_TYPE_BATTERY 0 -#define PWRDEV_TYPE_AC 1 - -#define BAT_STAT_PRESENT (1<<0) -#define BAT_STAT_LOW (1<<1) -#define BAT_STAT_FULL (1<<2) -#define BAT_STAT_CHARGING (1<<3) -#define BAT_STAT_DISCHARGING (1<<4) -#define BAT_STAT_OVERTEMP (1<<5) -#define BAT_STAT_CRITICAL (1<<6) -#define BAT_STAT_FIRE (1<<7) -#define BAT_STAT_CHARGE_DONE (1<<8) - -/* Thou shalt not export any attributes in sysfs except these, and - with these units: */ -#define BAT_INFO_STATUS "status" /* Not free-form. Use - provided function */ -#define BAT_INFO_TEMP1 "temp1" /* °C/1000 */ -#define BAT_INFO_TEMP1_NAME "temp1_name" /* string */ - -#define BAT_INFO_TEMP2 "temp2" /* °C/1000 */ -#define BAT_INFO_TEMP2_NAME "temp2_name" /* string */ - -#define BAT_INFO_VOLTAGE "voltage" /* mV */ -#define BAT_INFO_VOLTAGE_DESIGN "voltage_design" /* mV */ - -#define BAT_INFO_CURRENT "current" /* mA */ -#define BAT_INFO_CURRENT_NOW "current_now" /* mA */ - -#define BAT_INFO_POWER "power" /* mW */ -#define BAT_INFO_POWER_NOW "power_now" /* mW */ - -/* The following capacity/charge properties are represented in either - mA or mW. The CAP_UNITS property MUST be provided if any of these are. */ -#define BAT_INFO_RATE "rate" /* CAP_UNITS */ -#define BAT_INFO_CAP_LEFT "capacity_left" /* CAP_UNITS*h */ -#define BAT_INFO_CAP_DESIGN "capacity_design" /* CAP_UNITS*h */ -#define BAT_INFO_CAP_LAST_FULL "capacity_last_full" /* CAP_UNITS*h */ -#define BAT_INFO_CAP_LOW "capacity_low_thresh" /* CAP_UNITS*h */ -#define BAT_INFO_CAP_WARN "capacity_warn_thresh" /* CAP_UNITS*h */ -#define BAT_INFO_CAP_UNITS "capacity_units" /* string: must be - either mA or mW */ - -#define BAT_INFO_CAP_PCT "capacity_percentage" /* integer */ - -#define BAT_INFO_TIME_EMPTY "time_to_empty" /* seconds */ -#define BAT_INFO_TIME_EMPTY_NOW "time_to_empty_now" /* seconds */ -#define BAT_INFO_TIME_FULL "time_to_full" /* seconds */ -#define BAT_INFO_TIME_FULL_NOW "time_to_full_now" /* seconds */ - -#define BAT_INFO_MANUFACTURER "manufacturer" /* string */ -#define BAT_INFO_TECHNOLOGY "technology" /* string */ -#define BAT_INFO_MODEL "model" /* string */ -#define BAT_INFO_SERIAL "serial" /* string */ -#define BAT_INFO_OEM_INFO "oem_info" /* string */ - -#define BAT_INFO_CYCLE_COUNT "cycle_count" /* integer */ -#define BAT_INFO_DATE_MFR "date_manufactured" /* YYYY[-MM[-DD]] */ -#define BAT_INFO_DATE_FIRST_USE "date_first_use" /* YYYY[-MM[-DD]] */ - -struct battery_dev { - int status_cap; - int id; - int type; - const char *name; - - struct device *dev; -}; - -int battery_device_register(struct device *parent, - struct battery_dev *battery_cdev); -void battery_device_unregister(struct battery_dev *battery_cdev); - - -ssize_t battery_attribute_show_status(char *buf, unsigned long status); -ssize_t battery_attribute_show_ac_status(char *buf, unsigned long status); -#endif /* __LINUX_BATTERY_H__ */ diff --git a/target/linux/olpc/files/sound/pci/cs5535audio/cs5535audio_olpc.c b/target/linux/olpc/files/sound/pci/cs5535audio/cs5535audio_olpc.c deleted file mode 100644 index 791be73bfb..0000000000 --- a/target/linux/olpc/files/sound/pci/cs5535audio/cs5535audio_olpc.c +++ /dev/null @@ -1,110 +0,0 @@ -#include -#include -#include -#include -#include - -#include -#include "cs5535audio.h" - -/* - * OLPC has an additional feature on top of the regular AD1888 codec features. - * It has an Analog Input mode that is switched into (after disabling the - * High Pass Filter) via GPIO. It is only supported on B2 and later models. - */ - -int olpc_ai_enable(struct snd_ac97 *ac97, u8 val) -{ - int err; - - /* - * update the High Pass Filter (via AC97_AD_TEST2), and then set - * Analog Input mode through a GPIO. - */ - - if (val) { - err = snd_ac97_update_bits(ac97, AC97_AD_TEST2, - 1<type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; - uinfo->count = 1; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = 1; - return 0; -} - -static int snd_cs5535audio_ai_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - ucontrol->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC, - GPIO_OUTPUT_VAL); - return 0; -} - -static int snd_cs5535audio_ai_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol); - struct snd_ac97 *ac97 = cs5535au->ac97; - - olpc_ai_enable(ac97, ucontrol->value.integer.value[0]); - - return 1; -} - -static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata = -{ - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "DC Mode Enable", - .info = snd_cs5535audio_ai_info, - .get = snd_cs5535audio_ai_get, - .put = snd_cs5535audio_ai_put, - .private_value = 0 -}; - -void __devinit olpc_prequirks(struct snd_card *card, - struct snd_ac97_template *ac97) -{ - /* Bail if this isn't an OLPC platform */ - if (!machine_is_olpc()) - return; - - /* If on an OLPC B3 or higher, invert EAPD. */ - if (olpc_rev_after(OLPC_REV_B2)) - ac97->scaps |= AC97_SCAP_INV_EAPD; -} - -int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) -{ - struct snd_ctl_elem_id elem; - - /* Bail if this isn't an OLPC platform */ - if (!machine_is_olpc()) - return 0; - - /* drop the original ad1888 HPF control */ - memset(&elem, 0, sizeof(elem)); - elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER; - strcpy(elem.name, "High Pass Filter Enable"); - snd_ctl_remove_id(card, &elem); - - /* add the override for OLPC's HPF */ - return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls, - ac97->private_data)); -} diff --git a/target/linux/olpc/image/Makefile b/target/linux/olpc/image/Makefile index a245d72cf1..23aee45c80 100644 --- a/target/linux/olpc/image/Makefile +++ b/target/linux/olpc/image/Makefile @@ -39,7 +39,7 @@ ifeq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),y) endif define Image/Prepare - cp $(LINUX_DIR)/arch/i386/boot/bzImage $(KDIR)/bzImage + cp $(LINUX_DIR)/arch/*86/boot/bzImage $(KDIR)/bzImage $(call Image/Prepare/bootscript) endef diff --git a/target/linux/olpc/image/olpc.fth b/target/linux/olpc/image/olpc.fth index a23cdd4fdf..3d284d2fcd 100644 --- a/target/linux/olpc/image/olpc.fth +++ b/target/linux/olpc/image/olpc.fth @@ -1,4 +1,4 @@ \ Boot script " u:\boot\vmlinuz" to boot-device -" block2mtd.block2mtd=/dev/sda2,65536,rootfs root=/dev/mtdblock1 rootfstype=squashfs init=/etc/preinit rootdelay=5 noinitrd console=tty0 quiet" to boot-file +" block2mtd.block2mtd=/dev/sda2,65536,rootfs root=/dev/mtdblock1 rootfstype=squashfs init=/etc/preinit noinitrd console=tty0" to boot-file boot diff --git a/target/linux/olpc/patches-2.6.24/100-olpc.patch b/target/linux/olpc/patches-2.6.24/100-olpc.patch new file mode 100644 index 0000000000..b694ef4e36 --- /dev/null +++ b/target/linux/olpc/patches-2.6.24/100-olpc.patch @@ -0,0 +1,10201 @@ +diff -purN linux_2.6.24_org/arch/x86/Kconfig linux_2.6.24_olpc/arch/x86/Kconfig +--- linux_2.6.24_org/arch/x86/Kconfig 2008-02-15 20:11:57.000000000 +0000 ++++ linux_2.6.24_olpc/arch/x86/Kconfig 2008-02-15 18:59:21.000000000 +0000 +@@ -1415,6 +1415,9 @@ config PCI_GODIRECT + config PCI_GOANY + bool "Any" + ++config PCI_GOOLPC ++ bool "OLPC" ++ + endchoice + + config PCI_BIOS +@@ -1425,7 +1428,7 @@ config PCI_BIOS + # x86-64 doesn't support PCI BIOS access from long mode so always go direct. + config PCI_DIRECT + bool +- depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY) || X86_VISWS) ++ depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS) + default y + + config PCI_MMCONFIG +@@ -1442,6 +1445,11 @@ config PCI_MMCONFIG + bool "Support mmconfig PCI config space access" + depends on X86_64 && PCI && ACPI + ++config PCI_OLPC ++ bool ++ depends on PCI && PCI_GOOLPC ++ default y ++ + config DMAR + bool "Support for DMA Remapping Devices (EXPERIMENTAL)" + depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL +@@ -1561,6 +1569,21 @@ config K8_NB + def_bool y + depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA))) + ++config OLPC ++ bool "OLPC Support" ++ default n ++ help ++ Add OLPC Support ++ ++config OLPC_PM ++ bool "OLPC power management support" ++ default n ++ depends on OLPC ++ ++config OPEN_FIRMWARE ++ bool "Support for Open Firmware" ++ default y if OLPC ++ + source "drivers/pcmcia/Kconfig" + + source "drivers/pci/hotplug/Kconfig" +diff -purN linux_2.6.24_org/arch/x86/kernel/Makefile_32 linux_2.6.24_olpc/arch/x86/kernel/Makefile_32 +--- linux_2.6.24_org/arch/x86/kernel/Makefile_32 2008-02-15 20:11:58.000000000 +0000 ++++ linux_2.6.24_olpc/arch/x86/kernel/Makefile_32 2008-02-15 18:59:25.000000000 +0000 +@@ -49,6 +49,13 @@ obj-y += pcspeaker.o + + obj-$(CONFIG_SCx200) += scx200_32.o + ++obj-$(CONFIG_OLPC) += olpc.o ++obj-$(CONFIG_OLPC_PM) += olpc-pm.o olpc-wakeup.o ++obj-$(CONFIG_OPEN_FIRMWARE) += ofw.o ++obj-$(PROM_FS) += promfs.o ++ ++ ++ + # vsyscall_32.o contains the vsyscall DSO images as __initdata. + # We must build both images before we can assemble it. + # Note: kbuild does not track this dependency due to usage of .incbin +diff -purN linux_2.6.24_org/arch/x86/kernel/ofw.c linux_2.6.24_olpc/arch/x86/kernel/ofw.c +--- linux_2.6.24_org/arch/x86/kernel/ofw.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/arch/x86/kernel/ofw.c 2008-02-15 18:59:25.000000000 +0000 +@@ -0,0 +1,100 @@ ++/* ++ * ofw.c - Open Firmware client interface for 32-bit systems. ++ * This code is intended to be portable to any 32-bit Open Firmware ++ * implementation with a standard client interface that can be ++ * called when Linux is running. ++ * ++ * Copyright (C) 2007 Mitch Bradley ++ * Copyright (C) 2007 Andres Salomon ++ */ ++ ++#include ++#include ++#include ++#include ++ ++ ++int (*call_firmware)(int *); ++ ++static DEFINE_SPINLOCK(prom_lock); ++ ++#define MAXARGS 20 ++ ++/* ++ * The return value from ofw() in all cases is 0 if the attempt to call the ++ * function succeeded, <0 otherwise. That return value is from the ++ * gateway function only. Any results from the called function are returned ++ * via output argument pointers. ++ * ++ * Here are call templates for all the standard OFW client services: ++ * ++ * ofw("test", 1, 1, namestr, &missing); ++ * ofw("peer", 1, 1, phandle, &sibling_phandle); ++ * ofw("child", 1, 1, phandle, &child_phandle); ++ * ofw("parent", 1, 1, phandle, &parent_phandle); ++ * ofw("instance_to_package", 1, 1, ihandle, &phandle); ++ * ofw("getproplen", 2, 1, phandle, namestr, &proplen); ++ * ofw("getprop", 4, 1, phandle, namestr, bufaddr, buflen, &size); ++ * ofw("nextprop", 3, 1, phandle, previousstr, bufaddr, &flag); ++ * ofw("setprop", 4, 1, phandle, namestr, bufaddr, len, &size); ++ * ofw("canon", 3, 1, devspecstr, bufaddr, buflen, &length); ++ * ofw("finddevice", 1, 1, devspecstr, &phandle); ++ * ofw("instance-to-path", 3, 1, ihandle, bufaddr, buflen, &length); ++ * ofw("package-to-path", 3, 1, phandle, bufaddr, buflen, &length); ++ * ofw("call_method", numin, numout, in0, in1, ..., &out0, &out1, ...); ++ * ofw("open", 1, 1, devspecstr, &ihandle); ++ * ofw("close", 1, 0, ihandle); ++ * ofw("read", 3, 1, ihandle, addr, len, &actual); ++ * ofw("write", 3, 1, ihandle, addr, len, &actual); ++ * ofw("seek", 3, 1, ihandle, pos_hi, pos_lo, &status); ++ * ofw("claim", 3, 1, virtaddr, size, align, &baseaddr); ++ * ofw("release", 2, 0, virtaddr, size); ++ * ofw("boot", 1, 0, bootspecstr); ++ * ofw("enter", 0, 0); ++ * ofw("exit", 0, 0); ++ * ofw("chain", 5, 0, virtaddr, size, entryaddr, argsaddr, len); ++ * ofw("interpret", numin+1, numout+1, cmdstr, in0, ..., &catchres, &out0, ...); ++ * ofw("set-callback", 1, 1, newfuncaddr, &oldfuncaddr); ++ * ofw("set-symbol-lookup", 2, 0, symtovaladdr, valtosymaddr); ++ * ofw("milliseconds", 0, 1, &ms); ++ */ ++ ++int ofw(char *name, int numargs, int numres, ...) ++{ ++ va_list ap; ++ int argarray[MAXARGS+3]; ++ int argnum = 3; ++ int retval; ++ int *intp; ++ unsigned long flags; ++ ++ if (!call_firmware) ++ return -1; ++ if ((numargs + numres) > MAXARGS) ++ return -1; /* spit out an error? */ ++ ++ argarray[0] = (int) name; ++ argarray[1] = numargs; ++ argarray[2] = numres; ++ ++ va_start(ap, numres); ++ while (numargs) { ++ argarray[argnum++] = va_arg(ap, int); ++ numargs--; ++ } ++ ++ spin_lock_irqsave(&prom_lock, flags); ++ retval = call_firmware(argarray); ++ spin_unlock_irqrestore(&prom_lock, flags); ++ ++ if (retval == 0) { ++ while (numres) { ++ intp = va_arg(ap, int *); ++ *intp = argarray[argnum++]; ++ numres--; ++ } ++ } ++ va_end(ap); ++ return retval; ++} ++EXPORT_SYMBOL(ofw); +diff -purN linux_2.6.24_org/arch/x86/kernel/olpc.c linux_2.6.24_olpc/arch/x86/kernel/olpc.c +--- linux_2.6.24_org/arch/x86/kernel/olpc.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/arch/x86/kernel/olpc.c 2008-02-15 18:59:25.000000000 +0000 +@@ -0,0 +1,287 @@ ++/* Support for the OLPC DCON and OLPC EC access ++ * Copyright (C) 2006, Advanced Micro Devices, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++/* This is our new multi-purpose structure used to contain the ++ * information about the platform that we detect ++ */ ++ ++struct olpc_platform_t olpc_platform_info; ++EXPORT_SYMBOL_GPL(olpc_platform_info); ++ ++/********************************************************************* ++ * EC locking and access ++ *********************************************************************/ ++ ++static DEFINE_SPINLOCK(ec_lock); ++ ++/* what the timeout *should* be (in ms) */ ++#define EC_BASE_TIMEOUT 20 ++ ++/* the timeout that bugs in the EC might force us to actually use */ ++static int ec_timeout = EC_BASE_TIMEOUT; ++ ++static int __init olpc_ec_timeout_set(char *str) ++{ ++ if (get_option(&str, &ec_timeout) != 1) { ++ ec_timeout = EC_BASE_TIMEOUT; ++ printk(KERN_ERR "olpc-ec: invalid argument to " ++ "'olpc_ec_timeout=', ignoring!\n"); ++ } ++ printk(KERN_DEBUG "olpc-ec: using %d ms delay for EC commands.\n", ++ ec_timeout); ++ return 1; ++} ++__setup("olpc_ec_timeout=", olpc_ec_timeout_set); ++ ++/* ++ * These *bf_status functions return whether the buffers are full or not. ++ */ ++ ++static inline unsigned int ibf_status(unsigned int port) ++{ ++ return !!(inb(port) & 0x02); ++} ++ ++static inline unsigned int obf_status(unsigned int port) ++{ ++ return inb(port) & 0x01; ++} ++ ++#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d)) ++static int __wait_on_ibf(unsigned int line, unsigned int port, int desired) ++{ ++ unsigned int timeo; ++ int state = ibf_status(port); ++ ++ for (timeo = ec_timeout; state != desired && timeo; timeo--) { ++ mdelay(1); ++ state = ibf_status(port); ++ } ++ ++ if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) && ++ timeo < (ec_timeout - EC_BASE_TIMEOUT)) { ++ printk(KERN_WARNING "olpc-ec: %d: waited %u ms for IBF!\n", ++ line, ec_timeout - timeo); ++ } ++ ++ return !(state == desired); ++} ++ ++#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d)) ++static int __wait_on_obf(unsigned int line, unsigned int port, int desired) ++{ ++ unsigned int timeo; ++ int state = obf_status(port); ++ ++ for (timeo = ec_timeout; state != desired && timeo; timeo--) { ++ mdelay(1); ++ state = obf_status(port); ++ } ++ ++ if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) && ++ timeo < (ec_timeout - EC_BASE_TIMEOUT)) { ++ printk(KERN_WARNING "olpc-ec: %d: waited %u ms for OBF!\n", ++ line, ec_timeout - timeo); ++ } ++ ++ return !(state == desired); ++} ++ ++int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, ++ unsigned char *outbuf, size_t outlen) ++{ ++ unsigned long flags; ++ int ret = -EIO; ++ int i; ++ ++ spin_lock_irqsave(&ec_lock, flags); ++ ++ /* Clear OBF */ ++ for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++) ++ inb(0x68); ++ if (i == 10) { ++ printk(KERN_ERR "olpc-ec: timeout while attempting to " ++ "clear OBF flag!\n"); ++ goto err; ++ } ++ ++ if (wait_on_ibf(0x6c, 0)) { ++ printk(KERN_ERR "olpc-ec: timeout waiting for EC to " ++ "quiesce!\n"); ++ goto err; ++ } ++ ++restart: ++ /* ++ * Note that if we time out during any IBF checks, that's a failure; ++ * we have to return. There's no way for the kernel to clear that. ++ * ++ * If we time out during an OBF check, we can restart the command; ++ * reissuing it will clear the OBF flag, and we should be alright. ++ * The OBF flag will sometimes misbehave due to what we believe ++ * is a hardware quirk.. ++ */ ++ printk(KERN_DEBUG "olpc-ec: running cmd 0x%x\n", cmd); ++ outb(cmd, 0x6c); ++ ++ if (wait_on_ibf(0x6c, 0)) { ++ printk(KERN_ERR "olpc-ec: timeout waiting for EC to read " ++ "command!\n"); ++ goto err; ++ } ++ ++ if (inbuf && inlen) { ++ /* write data to EC */ ++ for (i = 0; i < inlen; i++) { ++ if (wait_on_ibf(0x6c, 0)) { ++ printk(KERN_ERR "olpc-ec: timeout waiting for" ++ " EC accept data!\n"); ++ goto err; ++ } ++ printk(KERN_DEBUG "olpc-ec: sending cmd arg 0x%x\n", ++ inbuf[i]); ++ outb(inbuf[i], 0x68); ++ } ++ } ++ if (outbuf && outlen) { ++ /* read data from EC */ ++ for (i = 0; i < outlen; i++) { ++ if (wait_on_obf(0x6c, 1)) { ++ printk(KERN_ERR "olpc-ec: timeout waiting for" ++ " EC to provide data!\n"); ++ goto restart; ++ } ++ outbuf[i] = inb(0x68); ++ printk(KERN_DEBUG "olpc-ec: received 0x%x\n", ++ outbuf[i]); ++ } ++ } ++ ++ ret = 0; ++err: ++ spin_unlock_irqrestore(&ec_lock, flags); ++ return ret; ++} ++EXPORT_SYMBOL_GPL(olpc_ec_cmd); ++ ++/********************************************************************* ++ * DCON stuff ++ *********************************************************************/ ++ ++static void __init ++ec_detect(void) ++{ ++ olpc_ec_cmd(0x08, NULL, 0, (unsigned char *) &olpc_platform_info.ecver, 1); ++} ++ ++/* Check to see if this version of the OLPC board has VSA built ++ * in, and set a flag ++ */ ++ ++static void __init vsa_detect(void) ++{ ++ u16 rev; ++ ++ outw(0xFC53, 0xAC1C); ++ outw(0x0003, 0xAC1C); ++ ++ rev = inw(0xAC1E); ++ ++ if (rev == 0x4132) ++ olpc_platform_info.flags |= OLPC_F_VSA; ++} ++ ++static void __init platform_detect(void) ++{ ++ size_t propsize; ++ u32 rev; ++ ++ if (ofw("getprop", 4, 1, NULL, "board-revision-int", &rev, 4, ++ &propsize) || propsize != 4) { ++ printk(KERN_ERR "ofw: getprop call failed!\n"); ++ rev = 0; ++ } ++ olpc_platform_info.boardrev = be32_to_cpu(rev); ++} ++ ++static int olpc_dcon_present = -1; ++module_param(olpc_dcon_present, int, 0444); ++ ++/* REV_A CMOS map: ++ * bit 440; DCON present bit ++ */ ++ ++#define OLPC_CMOS_DCON_OFFSET (440 / 8) ++#define OLPC_CMOS_DCON_MASK 0x01 ++ ++static int __init olpc_init(void) ++{ ++ unsigned char *romsig; ++ ++ spin_lock_init(&ec_lock); ++ ++ romsig = ioremap(0xffffffc0, 16); ++ ++ if (!romsig) ++ return 0; ++ ++ if (strncmp(romsig, "CL1 Q", 7)) ++ goto unmap; ++ if (strncmp(romsig+6, romsig+13, 3)) { ++ printk(KERN_INFO "OLPC BIOS signature looks invalid. Assuming not OLPC\n"); ++ goto unmap; ++ } ++ printk(KERN_INFO "OLPC board with OpenFirmware: %.16s\n", romsig); ++ ++ olpc_platform_info.flags |= OLPC_F_PRESENT; ++ ++ /* Get the platform revision */ ++ platform_detect(); ++ ++ /* If olpc_dcon_present isn't set by the command line, then ++ * "detect" it ++ */ ++ ++ if (olpc_dcon_present == -1) { ++ /* B1 and greater always has a DCON */ ++ if (olpc_board_at_least(olpc_board(0xb1))) ++ olpc_dcon_present = 1; ++ } ++ ++ if (olpc_dcon_present) ++ olpc_platform_info.flags |= OLPC_F_DCON; ++ ++ /* Get the EC revision */ ++ ec_detect(); ++ ++ /* Check to see if the VSA exists */ ++ vsa_detect(); ++ ++ printk(KERN_INFO "OLPC board revision: %s%X (EC=%x)\n", ++ ((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "", ++ olpc_platform_info.boardrev >> 4, ++ olpc_platform_info.ecver); ++ ++ unmap: ++ iounmap(romsig); ++ ++ return 0; ++} ++ ++postcore_initcall(olpc_init); +diff -purN linux_2.6.24_org/arch/x86/kernel/olpc-pm.c linux_2.6.24_olpc/arch/x86/kernel/olpc-pm.c +--- linux_2.6.24_org/arch/x86/kernel/olpc-pm.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/arch/x86/kernel/olpc-pm.c 2008-02-15 18:59:26.000000000 +0000 +@@ -0,0 +1,946 @@ ++/* olpc-pm.c ++ * © 2006 Red Hat, Inc. ++ * Portions also copyright 2006 Advanced Micro Devices, Inc. ++ * GPLv2 ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++/* A few words about accessing the ACPI and PM registers. Long story short, ++ byte and word accesses of the ACPI and PM registers is broken. The only ++ way to do it really correctly is to use dword accesses, which we do ++ throughout this code. For more details, please consult Eratta 17 and 18 ++ here: ++ ++ http://www.amd.com/files/connectivitysolutions/geode/geode_gx/34472D_CS5536_B1_specupdate.pdf ++*/ ++ ++#define PM_IRQ 3 ++ ++#define CS5536_PM_PWRBTN (1 << 8) ++#define CS5536_PM_RTC (1 << 10) ++#define CS5536_PM_WAK (1 << 15) ++ ++#define GPIO_WAKEUP_EC (1 << 31) ++#define GPIO_WAKEUP_LID (1 << 30) ++ ++#define PM_MODE_NORMAL 0 ++#define PM_MODE_TEST 1 ++#define PM_MODE_MAX 2 ++ ++/* These, and the battery EC commands, should be in an olpc.h. */ ++#define EC_WRITE_SCI_MASK 0x1b ++#define EC_READ_SCI_MASK 0x1c ++ ++extern void do_olpc_suspend_lowlevel(void); ++ ++static struct { ++ unsigned long address; ++ unsigned short segment; ++} ofw_bios_entry = { 0, __KERNEL_CS }; ++ ++static int olpc_pm_mode = PM_MODE_NORMAL; ++static unsigned long acpi_base; ++static unsigned long pms_base; ++static int sci_irq; ++static int olpc_lid_flag; ++ ++static struct input_dev *pm_inputdev; ++static struct input_dev *lid_inputdev; ++static struct input_dev *ebook_inputdev; ++static struct platform_suspend_ops olpc_pm_ops; ++ ++static int gpio_wake_events = 0; ++static int ebook_state = -1; ++static u16 olpc_wakeup_mask = 0; ++ ++static unsigned int test_timeout = 0; ++static char *wackup_source = "none"; ++ ++struct platform_device olpc_powerbutton_dev = { ++ .name = "powerbutton", ++ .id = -1, ++}; ++ ++struct platform_device olpc_lid_dev = { ++ .name = "lid", ++ .id = -1, ++}; ++ ++static void __init init_ebook_state(void) ++{ ++ if (olpc_ec_cmd(0x2a, NULL, 0, (unsigned char *) &ebook_state, 1)) { ++ printk(KERN_WARNING "olpc-pm: failed to get EBOOK state!\n"); ++ ebook_state = 0; ++ } ++ ebook_state &= 1; ++ ++ /* the input layer needs to know what value to default to as well */ ++ input_report_switch(ebook_inputdev, SW_TABLET_MODE, ebook_state); ++ input_sync(ebook_inputdev); ++} ++ ++static void (*battery_callback)(unsigned long); ++static DEFINE_SPINLOCK(battery_callback_lock); ++ ++/* propagate_events is non-NULL if run from workqueue, ++ NULL when called at init time to flush SCI queue */ ++static void process_sci_queue(struct work_struct *propagate_events) ++{ ++ unsigned char data = 0; ++ unsigned char battery_events = 0; ++ int ret; ++ ++ do { ++ ret = olpc_ec_cmd(0x84, NULL, 0, &data, 1); ++ if (!ret) { ++ printk(KERN_DEBUG "olpc-pm: SCI 0x%x received\n", ++ data); ++ ++ if (wackup_source && !strcmp(wackup_source, "sci")) { ++ /* ++ * XXX: in order for this to not be racy, we ++ * need assurance that we will never get ++ * preempted by olpc_do_sleep here! ++ */ ++ switch (data) { ++ case EC_SCI_SRC_EMPTY: ++ wackup_source = "empty sci"; ++ break; ++ case EC_SCI_SRC_GAME: ++ wackup_source = "key press"; ++ break; ++ case EC_SCI_SRC_BATTERY: ++ wackup_source = "battery"; ++ break; ++ case EC_SCI_SRC_BATSOC: ++ wackup_source = "battery state change"; ++ break; ++ case EC_SCI_SRC_BATERR: ++ wackup_source = "battery error"; ++ break; ++ case EC_SCI_SRC_EBOOK: ++ wackup_source = "ebook"; ++ break; ++ case EC_SCI_SRC_WLAN: ++ wackup_source = "wlan packet"; ++ break; ++ case EC_SCI_SRC_ACPWR: ++ wackup_source = "ac power"; ++ break; ++ default: ++ wackup_source = "unknown"; ++ } ++ } ++ ++ if (data & (EC_SCI_SRC_BATERR | EC_SCI_SRC_BATSOC | ++ EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR)) ++ battery_events |= data; ++ else if (data == EC_SCI_SRC_EBOOK) { ++ ebook_state = !ebook_state; ++ if (propagate_events) { ++ input_report_switch(ebook_inputdev, ++ SW_TABLET_MODE, ebook_state); ++ input_sync(ebook_inputdev); ++ } ++ } ++ } ++ } while (data && !ret); ++ ++ if (battery_events && battery_callback && propagate_events) { ++ void (*cbk)(unsigned long); ++ ++ /* Older EC versions didn't distinguish between AC and battery ++ events */ ++ if (olpc_platform_info.ecver < 0x51) ++ battery_events = EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR; ++ ++ spin_lock(&battery_callback_lock); ++ cbk = battery_callback; ++ spin_unlock(&battery_callback_lock); ++ ++ cbk(battery_events); ++ } ++ ++ if (ret) ++ printk(KERN_WARNING "Failed to clear SCI queue!\n"); ++} ++ ++static DECLARE_WORK(sci_work, process_sci_queue); ++ ++void olpc_register_battery_callback(void (*f)(unsigned long)) ++{ ++ spin_lock(&battery_callback_lock); ++ battery_callback = f; ++ spin_unlock(&battery_callback_lock); ++} ++EXPORT_SYMBOL_GPL(olpc_register_battery_callback); ++ ++void olpc_deregister_battery_callback(void) ++{ ++ spin_lock(&battery_callback_lock); ++ battery_callback = NULL; ++ spin_unlock(&battery_callback_lock); ++ cancel_work_sync(&sci_work); ++} ++EXPORT_SYMBOL_GPL(olpc_deregister_battery_callback); ++ ++ ++static int olpc_pm_interrupt(int irq, void *id) ++{ ++ uint32_t sts, gpe = 0; ++ ++ sts = inl(acpi_base + PM1_STS); ++ outl(sts | 0xFFFF, acpi_base + PM1_STS); ++ ++ if (olpc_board_at_least(olpc_board(0xb2))) { ++ gpe = inl(acpi_base + PM_GPE0_STS); ++ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS); ++ } ++ ++ if (sts & CS5536_PM_PWRBTN) { ++ if (!wackup_source) ++ wackup_source = "power button"; ++ printk(KERN_DEBUG "olpm-pm: PM_PWRBTN %sevent received\n", ++ sts & CS5536_PM_WAK ? "wakeup " : ""); ++ if (!(sts & CS5536_PM_WAK)) { ++ input_report_key(pm_inputdev, KEY_POWER, 1); ++ input_sync(pm_inputdev); ++ /* Do we need to delay this? */ ++ input_report_key(pm_inputdev, KEY_POWER, 0); ++ input_sync(pm_inputdev); ++ } ++ } ++ ++ if (gpe & GPIO_WAKEUP_EC) { ++ geode_gpio_clear(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS); ++ if (!wackup_source) ++ wackup_source = "sci"; ++ schedule_work(&sci_work); ++ } ++ ++ if (gpe & GPIO_WAKEUP_LID) { ++ /* Disable events */ ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); ++ ++ /* Clear the edge */ ++ ++ if (olpc_lid_flag) ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); ++ else ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); ++ ++ /* Clear the status too */ ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); ++ ++ /* The line is high when the LID is open, but SW_LID ++ * should be high when the LID is closed, so we pass the old ++ * value of olpc_lid_flag ++ */ ++ ++ input_report_switch(lid_inputdev, SW_LID, olpc_lid_flag); ++ input_sync(lid_inputdev); ++ if (!wackup_source) ++ wackup_source = "lid"; ++ ++ /* Swap the status */ ++ olpc_lid_flag = !olpc_lid_flag; ++ ++ if (olpc_lid_flag) ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); ++ else ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); ++ ++ /* re-enable the event */ ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++int olpc_ec_mask_set(u8 bits) ++{ ++ int ret; ++ u8 byte; ++ ++ ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &byte, 1); ++ if (ret) { ++ printk(KERN_ERR "olpc-pm: error getting SCI mask: %d\n", ret); ++ return ret; ++ } ++ /* the high bit is unused, if it is ever unset, that is a good sign ++ sign of EC communication corruption! */ ++ WARN_ON(!(byte & 0x80)); ++ ++ byte |= bits; ++ ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &byte, 1, NULL, 0); ++ if (ret) ++ printk(KERN_ERR "olpc-pm: error setting SCI mask: %d\n", ret); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(olpc_ec_mask_set); ++ ++int olpc_ec_mask_unset(u8 bits) ++{ ++ int ret; ++ u8 byte; ++ ++ ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &byte, 1); ++ if (ret) { ++ printk(KERN_ERR "olpc-pm: error getting SCI mask: %d\n", ret); ++ return ret; ++ } ++ /* the high bit is unused, if it is ever unset, that is a good sign ++ sign of EC communication corruption! */ ++ WARN_ON(!(byte & 0x80)); ++ ++ byte &= ~bits; ++ ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &byte, 1, NULL, 0); ++ if (ret) ++ printk(KERN_ERR "olpc-pm: error setting SCI mask: %d\n", ret); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(olpc_ec_mask_unset); ++ ++/* ++ * For now, only support STR. We also don't support suspending on ++ * B1s, due to difficulties with the cafe FPGA. ++ */ ++static int olpc_pm_state_valid(suspend_state_t pm_state) ++{ ++ if (pm_state == PM_SUSPEND_MEM && olpc_board_at_least(olpc_board(0xb2))) ++ return 1; ++ ++ return 0; ++} ++ ++/* This is a catchall function for operations that just don't belong ++ * anywhere else. Later we will evaluate if these belong in the ++ * individual device drivers or the firmware. ++ * If you add something to this function, please explain yourself with ++ * a comment. ++ */ ++ ++extern void gxfb_flatpanel_control(int state); ++ ++static u32 gpio_wakeup[2]; ++static u64 irq_sources[4]; ++static u64 mfgpt_irq_msr, mfgpt_nr_msr; ++ ++void olpc_fixup_wakeup(void) ++{ ++ u32 base = geode_gpio_base(); ++ int i; ++ ++ /* Enable the flatpanel sequencing as early as possible, because ++ it takes ~64ms to resume. This probably belongs in the firmware */ ++ ++ //gxfb_flatpanel_control(1); ++ ++ /* Tell the EC to stop inhibiting SCIs */ ++ olpc_ec_cmd(0x34, NULL, 0, NULL, 0); ++ ++ /* Restore the interrupt sources */ ++ wrmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]); ++ wrmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]); ++ wrmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]); ++ wrmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]); ++ ++ /* Restore the X and Y sources for GPIO */ ++ outl(gpio_wakeup[0], base + GPIO_MAP_X); ++ outl(gpio_wakeup[1], base + GPIO_MAP_Y); ++ ++ /* Resture the MFGPT MSRs */ ++ wrmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr); ++ wrmsrl(MFGPT_NR_MSR, mfgpt_nr_msr); ++ ++ for (i=0;i<2;i++) { ++ /* tell the wireless module to restart USB communication */ ++ olpc_ec_cmd(0x24, NULL, 0, NULL, 0); ++ } ++ ++ /* Turn all events on */ ++ olpc_ec_mask_set(EC_SCI_SRC_ALL); ++} ++ ++void olpc_fixup_sleep(void) ++{ ++ u32 base = geode_gpio_base(); ++ int i; ++ ++ /* Save the X and Y sources for GPIO */ ++ gpio_wakeup[0] = inl(base + GPIO_MAP_X); ++ gpio_wakeup[1] = inl(base + GPIO_MAP_Y); ++ ++ /* Save the Y and Z unrestricted sources */ ++ ++ rdmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]); ++ rdmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]); ++ rdmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]); ++ rdmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]); ++ ++ /* Turn off the MFGPT timers on the way down */ ++ ++ for(i = 0; i < 8; i++) { ++ u32 val = geode_mfgpt_read(i, MFGPT_REG_SETUP); ++ ++ if (val & MFGPT_SETUP_SETUP) { ++ val &= ~MFGPT_SETUP_CNTEN; ++ geode_mfgpt_write(i, MFGPT_REG_SETUP, val); ++ } ++ } ++ ++ /* Save the MFGPT MSRs */ ++ rdmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr); ++ rdmsrl(MFGPT_NR_MSR, mfgpt_nr_msr); ++ ++ if (device_may_wakeup(&olpc_powerbutton_dev.dev)) ++ olpc_wakeup_mask |= CS5536_PM_PWRBTN; ++ else ++ olpc_wakeup_mask &= ~(CS5536_PM_PWRBTN); ++ ++ if (device_may_wakeup(&olpc_lid_dev.dev)) { ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); ++ gpio_wake_events |= GPIO_WAKEUP_LID; ++ } else { ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); ++ gpio_wake_events &= ~(GPIO_WAKEUP_LID); ++ } ++ ++ /* We don't want to wake up on superfluous events */ ++ olpc_ec_mask_unset(EC_SCI_SRC_BATSOC | EC_SCI_SRC_ACPWR); ++ ++ /* ++ * Cmd 0x32 tells the EC that we're going into suspend; this was ++ * added to work around hardware races related to SCI events. This ++ * should cause the EC to inhibit further SCIs while MAIN_ON is ++ * transitioning low. ++ * ++ * There's also some sort of EC race whereby the EC gets its ++ * IBF/OBF flags confused and all future communication (after ++ * resuming) fails if we suspend too soon after updating ++ * the EC SCI mask. Having this command after updating the ++ * SCI mask allows the EC enough time to finish doing what it's ++ * doing. ++ */ ++ olpc_ec_cmd(0x32, NULL, 0, NULL, 0); ++} ++ ++static int olpc_pm_enter(suspend_state_t pm_state) ++{ ++ /* Only STR is supported */ ++ if (pm_state != PM_SUSPEND_MEM) ++ return -EINVAL; ++ ++ olpc_fixup_sleep(); ++ ++ /* Set the GPIO wakeup bits */ ++ outl(gpio_wake_events, acpi_base + PM_GPE0_EN); ++ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS); ++ ++ /* Save CPU state */ ++ do_olpc_suspend_lowlevel(); ++ ++ olpc_fixup_wakeup(); ++ ++ /* Restore the SCI wakeup events */ ++ outl(gpio_wake_events, acpi_base + PM_GPE0_EN); ++ ++ return 0; ++} ++ ++int asmlinkage olpc_do_sleep(u8 sleep_state) ++{ ++ void *pgd_addr = __va(read_cr3()); ++ printk(KERN_ERR "olpc_do_sleep!\n"); /* this needs to remain here so ++ * that gcc doesn't optimize ++ * away our __va! */ ++ /* FIXME: Set the SCI bits we want to wake up on here */ ++ ++ /* FIXME: Set any other SCI events that we might want here */ ++ ++ outl((olpc_wakeup_mask << 16) | 0xFFFF, acpi_base + PM1_STS); ++ ++ wackup_source = NULL; ++ ++ /* If we are in test mode, then just return (simulate a successful ++ suspend/resume). Otherwise, if we are doing the real thing, ++ then go for the gusto */ ++ ++ if (olpc_pm_mode != PM_MODE_TEST) { ++ __asm__ __volatile__("movl %0,%%eax" : : "r" (pgd_addr)); ++ __asm__("call *(%%edi); cld" ++ : : "D" (&ofw_bios_entry)); ++ __asm__ __volatile__("movb $0x34, %al\n\t" ++ "outb %al, $0x70\n\t" ++ "movb $0x30, %al\n\t" ++ "outb %al, $0x71\n\t"); ++ ++ } ++ else if (test_timeout > 0) { ++ int t; ++ ++ /* Delay N seconds for testing purposes */ ++ ++ for(t = 0; t < test_timeout; t++) ++ mdelay(1000); ++ } ++ ++ return 0; ++} ++ ++static void olpc_power_off(void) ++{ ++ printk(KERN_INFO "OLPC power off sequence...\n"); ++ ++ /* Enable all of these controls with 0 delay */ ++ outl(0x40000000, pms_base + PM_SCLK); ++ outl(0x40000000, pms_base + PM_IN_SLPCTL); ++ outl(0x40000000, pms_base + PM_WKXD); ++ outl(0x40000000, pms_base + PM_WKD); ++ ++ /* Clear status bits (possibly unnecessary) */ ++ outl(0x0002ffff, pms_base + PM_SSC); ++ outl(0xffffffff, acpi_base + PM_GPE0_STS); ++ ++ /* Write SLP_EN bit to start the machinery */ ++ outl(0x00002000, acpi_base + PM1_CNT); ++} ++ ++/* This code will slowly disappear as we fixup the issues in the BIOS */ ++ ++static void __init olpc_fixup_bios(void) ++{ ++ unsigned long hi, lo; ++ ++ if (olpc_has_vsa()) { ++ /* The VSA aggressively sets up the ACPI and PM register for ++ * trapping - its not enough to force these values in the BIOS - ++ * they seem to be changed during PCI init as well. ++ */ ++ ++ /* Change the PM registers to decode to the DD */ ++ ++ rdmsr(0x510100e2, lo, hi); ++ hi |= 0x80000000; ++ wrmsr(0x510100e2, lo, hi); ++ ++ /* Change the ACPI registers to decode to the DD */ ++ ++ rdmsr(0x510100e3, lo, hi); ++ hi |= 0x80000000; ++ wrmsr(0x510100e3, lo, hi); ++ } ++ ++ /* GPIO24 controls WORK_AUX */ ++ ++ geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_ENABLE); ++ geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_AUX1); ++ ++ if (olpc_board_at_least(olpc_board(0xb2))) { ++ /* GPIO10 is connected to the thermal alarm */ ++ geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_ENABLE); ++ geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_AUX1); ++ ++ /* Set up to get LID events */ ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_ENABLE); ++ ++ /* Clear edge detection and event enable for now */ ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); ++ ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); ++ ++ /* Set the LID to cause an PME event on group 6 */ ++ geode_gpio_event_pme(OLPC_GPIO_LID, 6); ++ ++ /* Set PME group 6 to fire the SCI interrupt */ ++ geode_gpio_set_irq(6, sci_irq); ++ } ++ ++ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_INPUT_ENABLE); ++ ++ /* Clear pending events */ ++ ++ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS); ++ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS); ++ ++ //geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_EN); ++ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE); ++ ++ /* Set the SCI to cause a PME event on group 7 */ ++ geode_gpio_event_pme(OLPC_GPIO_ECSCI, 7); ++ ++ /* And have group 6 also fire the SCI interrupt */ ++ geode_gpio_set_irq(7, sci_irq); ++} ++ ++/* This provides a control file for setting up testing of the ++ power management system. For now, there is just one setting: ++ "test" which means that we don't actually enter the power ++ off routine. ++*/ ++ ++static const char * const pm_states[] = { ++ [PM_MODE_NORMAL] = "normal", ++ [PM_MODE_TEST] = "test", ++}; ++ ++extern struct mutex pm_mutex; ++extern struct kset power_subsys; ++ ++static ssize_t control_show(struct kset *s, char *buf) ++{ ++ return sprintf(buf, "%s\n", pm_states[olpc_pm_mode]); ++} ++ ++static ssize_t control_store(struct kset *s, const char *buf, size_t n) ++{ ++ int i, len; ++ char *p; ++ ++ p = memchr(buf, '\n', n); ++ len = p ? p - buf : n; ++ ++ /* Grab the mutex */ ++ mutex_lock(&pm_mutex); ++ ++ for(i = 0; i < PM_MODE_MAX; i++) { ++ if (!strncmp(buf, pm_states[i], len)) { ++ olpc_pm_mode = i; ++ break; ++ } ++ } ++ ++ mutex_unlock(&pm_mutex); ++ ++ return (i == PM_MODE_MAX) ? -EINVAL : n; ++} ++ ++static ssize_t timeout_show(struct kset *s, char *buf) ++{ ++ return sprintf(buf, "%d\n", test_timeout); ++} ++ ++static ssize_t timeout_store(struct kset *s, const char *buf, size_t n) ++{ ++ unsigned int t = simple_strtoul(buf, NULL, 0); ++ test_timeout = t; ++ ++ return n; ++} ++ ++static ssize_t wackup_show(struct kset *s, char *buf) ++{ ++ return sprintf(buf, "%s\n", wackup_source ? wackup_source : "none"); ++} ++ ++static struct subsys_attribute control_attr = { ++ .attr = { ++ .name = "olpc-pm", ++ .mode = 0644, ++ }, ++ .show = control_show, ++ .store = control_store, ++}; ++ ++static struct subsys_attribute test_attr = { ++ .attr = { ++ .name = "test-timeout", ++ .mode = 0644, ++ }, ++ .show = timeout_show, ++ .store = timeout_store, ++}; ++ ++static struct subsys_attribute wackup_attr = { ++ .attr = { ++ .name = "wakeup-source", ++ .mode = 0400, ++ }, ++ .show = wackup_show, ++}; ++ ++static struct attribute * olpc_attributes[] = { ++ &control_attr.attr, ++ &test_attr.attr, ++ &wackup_attr.attr, ++ NULL ++}; ++ ++static struct attribute_group olpc_attrs = { ++ .attrs = olpc_attributes, ++}; ++ ++static int __init alloc_inputdevs(void) ++{ ++ int ret = -ENOMEM; ++ ++ pm_inputdev = input_allocate_device(); ++ if (!pm_inputdev) ++ goto err; ++ ++ pm_inputdev->name = "OLPC PM"; ++ pm_inputdev->phys = "olpc_pm/input0"; ++ set_bit(EV_KEY, pm_inputdev->evbit); ++ set_bit(KEY_POWER, pm_inputdev->keybit); ++ ++ ret = input_register_device(pm_inputdev); ++ if (ret) { ++ printk(KERN_ERR "olpc-pm: failed to register PM input device: %d\n", ret); ++ goto err; ++ } ++ ++ lid_inputdev = input_allocate_device(); ++ if (!lid_inputdev) ++ goto err; ++ ++ lid_inputdev->name = "OLPC lid switch"; ++ lid_inputdev->phys = "olpc_pm/input1"; ++ set_bit(EV_SW, lid_inputdev->evbit); ++ set_bit(SW_LID, lid_inputdev->swbit); ++ ++ ret = input_register_device(lid_inputdev); ++ if (ret) { ++ printk(KERN_ERR "olpc-pm: failed to register lid input device: %d\n", ret); ++ goto err; ++ } ++ ++ ebook_inputdev = input_allocate_device(); ++ if (!ebook_inputdev) ++ goto err; ++ ++ ebook_inputdev->name = "OLPC ebook switch"; ++ ebook_inputdev->phys = "olpc_pm/input2"; ++ set_bit(EV_SW, ebook_inputdev->evbit); ++ set_bit(SW_TABLET_MODE, ebook_inputdev->swbit); ++ ++ ret = input_register_device(ebook_inputdev); ++ if (ret) { ++ printk(KERN_ERR "olpc-pm: failed to register ebook input device: %d\n", ret); ++ goto err; ++ } ++ ++ return ret; ++err: ++ if (ebook_inputdev) { ++ input_unregister_device(ebook_inputdev); ++ ebook_inputdev = NULL; ++ } ++ if (lid_inputdev) { ++ input_unregister_device(lid_inputdev); ++ lid_inputdev = NULL; ++ } ++ if (pm_inputdev) { ++ input_unregister_device(pm_inputdev); ++ pm_inputdev = NULL; ++ } ++ ++ return ret; ++} ++ ++static int __init olpc_pm_init(void) ++{ ++ uint32_t lo, hi; ++ int ret; ++ ++ if (!machine_is_olpc()) ++ return -ENODEV; ++ ++ acpi_base = geode_acpi_base(); ++ pms_base = geode_pms_base(); ++ ++ if (!acpi_base || !pms_base) ++ return -ENODEV; ++ ++ pm_power_off = olpc_power_off; ++ ++ ret = alloc_inputdevs(); ++ if (ret) ++ return ret; ++ ++ rdmsr(0x51400020, lo, hi); ++ sci_irq = (lo >> 20) & 15; ++ ++ if (sci_irq) { ++ printk(KERN_INFO "SCI is mapped to IRQ %d\n", sci_irq); ++ } else { ++ /* Zero doesn't mean zero -- it means masked */ ++ printk(KERN_INFO "SCI unmapped. Mapping to IRQ 3\n"); ++ sci_irq = 3; ++ lo |= 0x00300000; ++ wrmsrl(0x51400020, lo); ++ } ++ ++ olpc_fixup_bios(); ++ ++ lo = inl(pms_base + PM_FSD); ++ ++ /* Lock, enable failsafe, 4 seconds */ ++ outl(0xc001f400, pms_base + PM_FSD); ++ ++ /* Here we set up the SCI events we're interested in during ++ * real-time. We have no sleep button, and the RTC doesn't make ++ * sense, so set up the power button ++ */ ++ ++ outl(inl(acpi_base) | ((CS5536_PM_PWRBTN) << 16), acpi_base); ++ ++ if (olpc_board_at_least(olpc_board(0xb2))) { ++ gpio_wake_events |= GPIO_WAKEUP_LID; ++ ++ /* Get the current value of the GPIO, and set up the edges */ ++ olpc_lid_flag = geode_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK); ++ ++ /* Watch for the opposite edge */ ++ ++ if (olpc_lid_flag) ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); ++ else ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); ++ ++ /* Enable the event */ ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); ++ } ++ ++ /* Set up the EC SCI */ ++ ++ gpio_wake_events |= GPIO_WAKEUP_EC; ++ ++ outl(gpio_wake_events, acpi_base + PM_GPE0_EN); ++ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS); ++ ++ /* Select level triggered in PIC */ ++ ++ if (sci_irq < 8) { ++ lo = inb(0x4d0); ++ lo |= 1 << sci_irq; ++ outb(lo, 0x4d0); ++ } else { ++ lo = inb(0x4d1); ++ lo |= 1 << (sci_irq - 8); ++ outb(lo, 0x4d1); ++ } ++ /* Clear pending interrupt */ ++ outl(inl(acpi_base) | 0xFFFF, acpi_base); ++ process_sci_queue(0); /* we just want to flush the queue here */ ++ init_ebook_state(); ++ ++ /* Enable the interrupt */ ++ ++ ret = request_irq(sci_irq, &olpc_pm_interrupt, 0, "SCI", &acpi_base); ++ ++ if (ret) { ++ printk(KERN_ERR "Error registering SCI: %d\n", ret); ++ return ret; ++ } ++ ++ ofw_bios_entry.address = 0xF0000 + PAGE_OFFSET; ++ suspend_set_ops(&olpc_pm_ops); ++ ++ sysfs_create_group(&power_subsys.kobj, &olpc_attrs); ++ ++ return 0; ++} ++ ++ ++#if defined (CONFIG_RTC_DRV_CMOS) || defined (CONFIG_RTC_DRV_CMOS_MODULE) ++struct resource rtc_platform_resource[2] = { ++ { ++ .flags = IORESOURCE_IO, ++ .start = RTC_PORT(0), ++ .end = RTC_PORT(0) + RTC_IO_EXTENT ++ }, ++ { ++ .flags = IORESOURCE_IRQ, ++ .start = 8, ++ .end = 8, ++ }, ++}; ++ ++ ++static void rtc_wake_on(struct device *dev) ++{ ++ olpc_wakeup_mask |= CS5536_PM_RTC; ++} ++ ++static void rtc_wake_off(struct device *dev) ++{ ++ olpc_wakeup_mask &= ~(CS5536_PM_RTC); ++} ++ ++static struct cmos_rtc_board_info rtc_info = { ++ .rtc_day_alarm = 0, ++ .rtc_mon_alarm = 0, ++ .rtc_century = 0, ++ .wake_on = rtc_wake_on, ++ .wake_off = rtc_wake_off, ++}; ++ ++struct platform_device olpc_rtc_device = { ++ .name = "rtc_cmos", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(rtc_platform_resource), ++ .dev.platform_data = &rtc_info, ++ .resource = rtc_platform_resource, ++}; ++ ++static int __init olpc_platform_init(void) ++{ ++ rdmsrl(MSR_RTC_DOMA_OFFSET, rtc_info.rtc_day_alarm); ++ rdmsrl(MSR_RTC_MONA_OFFSET, rtc_info.rtc_mon_alarm); ++ rdmsrl(MSR_RTC_CEN_OFFSET, rtc_info.rtc_century); ++ ++ (void)platform_device_register(&olpc_rtc_device); ++ device_init_wakeup(&olpc_rtc_device.dev, 1); ++ ++ (void)platform_device_register(&olpc_powerbutton_dev); ++ device_init_wakeup(&olpc_powerbutton_dev.dev, 1); ++ ++ (void)platform_device_register(&olpc_lid_dev); ++ device_init_wakeup(&olpc_lid_dev.dev, 1); ++ ++ return 0; ++} ++arch_initcall(olpc_platform_init); ++#endif /* CONFIG_RTC_DRV_CMOS */ ++ ++static void olpc_pm_exit(void) ++{ ++ /* Clear any pending events, and disable them */ ++ outl(0xFFFF, acpi_base+2); ++ ++ free_irq(sci_irq, &acpi_base); ++ input_unregister_device(pm_inputdev); ++ input_unregister_device(lid_inputdev); ++ input_unregister_device(ebook_inputdev); ++} ++ ++static struct platform_suspend_ops olpc_pm_ops = { ++ .valid = olpc_pm_state_valid, ++ .enter = olpc_pm_enter, ++}; ++ ++module_init(olpc_pm_init); ++module_exit(olpc_pm_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("David Woodhouse "); ++MODULE_DESCRIPTION("AMD Geode power management for OLPC CL1"); +diff -purN linux_2.6.24_org/arch/x86/kernel/olpc-sleep.S linux_2.6.24_olpc/arch/x86/kernel/olpc-sleep.S +--- linux_2.6.24_org/arch/x86/kernel/olpc-sleep.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/arch/x86/kernel/olpc-sleep.S 2008-02-15 18:59:26.000000000 +0000 +@@ -0,0 +1,39 @@ ++.text ++ ++ENTRY(olpc_sleep_asm) ++olpc_sleep: ++ ;; Get the value of PM1_CNT and store it off ++ ++ add 08h, ax ++ mov bx,dx ++ in dx,eax ++ or 2000h, ax ++ mov ax,di ++ ++ ;; flush the cache ++ wbinvd ++ ++ ;; GX2 must disable refresh before going into self-refresh ++ mov 2000000180xh, ecx ++ rdmsr ++ mov eax, esi ++ and 0FF0000FFh, eax ++ wrmsr ++ ++ ;; Now, put the memory into self refresh ++ mov 2004, cx ++ xor edx, edx ++ xor eax, eax ++ mov 04h, al ++ wrmsr ++ ++ ;; Thats all she wrote - time to go to sleep ++ ++ mov bx, dx ++ movzx di, eax ++ out eax, dx ++ ++ ;; ++ ++ ++ +diff -purN linux_2.6.24_org/arch/x86/kernel/olpc-wakeup.S linux_2.6.24_olpc/arch/x86/kernel/olpc-wakeup.S +--- linux_2.6.24_org/arch/x86/kernel/olpc-wakeup.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/arch/x86/kernel/olpc-wakeup.S 2008-02-15 18:59:25.000000000 +0000 +@@ -0,0 +1,133 @@ ++.text ++#include ++#include ++#include ++ ++ .macro writepost,value ++ movb $0x34, %al ++ outb %al, $0x70 ++ movb $\value, %al ++ outb %al, $0x71 ++ .endm ++ ++ALIGN ++ .align 4096 ++ ++wakeup_start: ++# jmp wakeup_start ++ ++ cli ++ cld ++ ++ # Clear any dangerous flags ++ ++ pushl $0 ++ popfl ++ ++ writepost 0x31 ++ ++ # Set up %cr3 ++ movl $swsusp_pg_dir - __PAGE_OFFSET, %eax ++ movl %eax, %cr3 ++ ++ movl saved_cr4, %eax ++ movl %eax, %cr4 ++ ++ movl saved_cr0, %eax ++ movl %eax, %cr0 ++ ++ jmp 1f ++1: ++ ljmpl $__KERNEL_CS,$wakeup_return ++ ++ ++.org 0x1000 ++ ++wakeup_return: ++ movw $__KERNEL_DS, %ax ++ movw %ax, %ss ++ movw %ax, %ds ++ movw %ax, %es ++ movw %ax, %fs ++ movw %ax, %gs ++ ++ lgdt saved_gdt ++ lidt saved_idt ++ lldt saved_ldt ++ ljmp $(__KERNEL_CS),$1f ++1: ++ movl %cr3, %eax ++ movl %eax, %cr3 ++ wbinvd ++ ++ # Go back to the return point ++ jmp ret_point ++ ++save_registers: ++ sgdt saved_gdt ++ sidt saved_idt ++ sldt saved_ldt ++ ++ pushl %edx ++ movl %cr4, %edx ++ movl %edx, saved_cr4 ++ ++ movl %cr0, %edx ++ movl %edx, saved_cr0 ++ ++ popl %edx ++ ++ ++ movl %ebx, saved_context_ebx ++ movl %ebp, saved_context_ebp ++ movl %esi, saved_context_esi ++ movl %edi, saved_context_edi ++ ++ pushfl ++ popl saved_context_eflags ++ ++ ret ++ ++ ++restore_registers: ++ movl saved_context_ebp, %ebp ++ movl saved_context_ebx, %ebx ++ movl saved_context_esi, %esi ++ movl saved_context_edi, %edi ++ ++ pushl saved_context_eflags ++ popfl ++ ++ ret ++ ++ ++ENTRY(do_olpc_suspend_lowlevel) ++ call save_processor_state ++ call save_registers ++ ++ # This is the stack context we want to remember ++ movl %esp, saved_context_esp ++ ++ pushl $3 ++ call olpc_do_sleep ++ ++ jmp wakeup_start ++ .p2align 4,,7 ++ret_point: ++ movl saved_context_esp, %esp ++ ++ writepost 0x32 ++ ++ call restore_registers ++ call restore_processor_state ++ ret ++ ++.data ++ALIGN ++ ++saved_gdt: .long 0,0 ++saved_idt: .long 0,0 ++saved_ldt: .long 0 ++saved_cr4: .long 0 ++saved_cr0: .long 0 ++ +diff -purN linux_2.6.24_org/arch/x86/kernel/prom.c linux_2.6.24_olpc/arch/x86/kernel/prom.c +--- linux_2.6.24_org/arch/x86/kernel/prom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/arch/x86/kernel/prom.c 2008-02-15 18:59:26.000000000 +0000 +@@ -0,0 +1,478 @@ ++/* ++ * Procedures for creating, accessing and interpreting the device tree. ++ * ++ * Paul Mackerras August 1996. ++ * Copyright (C) 1996-2005 Paul Mackerras. ++ * ++ * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. ++ * {engebret|bergner}@us.ibm.com ++ * ++ * Adapted for sparc64 by David S. Miller davem@davemloft.net ++ * ++ * Adapter for i386/OLPC by Andres Salomon ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* ++ * XXX: This is very much a stub; right now we're keeping 2 device trees ++ * in memory (one for promfs, and one here). That will not remain ++ * for long! ++ */ ++ ++static struct device_node *allnodes; ++ ++/* use when traversing tree through the allnext, child, sibling, ++ * or parent members of struct device_node. ++ */ ++static DEFINE_RWLOCK(devtree_lock); ++ ++int of_device_is_compatible(const struct device_node *device, ++ const char *compat) ++{ ++ const char* cp; ++ int cplen, l; ++ ++ cp = of_get_property(device, "compatible", &cplen); ++ if (cp == NULL) ++ return 0; ++ while (cplen > 0) { ++ if (strncmp(cp, compat, strlen(compat)) == 0) ++ return 1; ++ l = strlen(cp) + 1; ++ cp += l; ++ cplen -= l; ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(of_device_is_compatible); ++ ++struct device_node *of_get_parent(const struct device_node *node) ++{ ++ struct device_node *np; ++ ++ if (!node) ++ return NULL; ++ ++ np = node->parent; ++ ++ return np; ++} ++EXPORT_SYMBOL(of_get_parent); ++ ++struct device_node *of_get_next_child(const struct device_node *node, ++ struct device_node *prev) ++{ ++ struct device_node *next; ++ ++ next = prev ? prev->sibling : node->child; ++ for (; next != 0; next = next->sibling) { ++ break; ++ } ++ ++ return next; ++} ++EXPORT_SYMBOL(of_get_next_child); ++ ++struct device_node *of_find_node_by_path(const char *path) ++{ ++ struct device_node *np = allnodes; ++ ++ for (; np != 0; np = np->allnext) { ++ if (np->full_name != 0 && strcmp(np->full_name, path) == 0) ++ break; ++ } ++ ++ return np; ++} ++EXPORT_SYMBOL(of_find_node_by_path); ++ ++struct device_node *of_find_node_by_phandle(phandle handle) ++{ ++ struct device_node *np; ++ ++ for (np = allnodes; np != 0; np = np->allnext) ++ if (np->node == handle) ++ break; ++ ++ return np; ++} ++EXPORT_SYMBOL(of_find_node_by_phandle); ++ ++struct device_node *of_find_node_by_name(struct device_node *from, ++ const char *name) ++{ ++ struct device_node *np; ++ ++ np = from ? from->allnext : allnodes; ++ for (; np != NULL; np = np->allnext) ++ if (np->name != NULL && strcmp(np->name, name) == 0) ++ break; ++ ++ return np; ++} ++EXPORT_SYMBOL(of_find_node_by_name); ++ ++struct device_node *of_find_node_by_type(struct device_node *from, ++ const char *type) ++{ ++ struct device_node *np; ++ ++ np = from ? from->allnext : allnodes; ++ for (; np != 0; np = np->allnext) ++ if (np->type != 0 && strcmp(np->type, type) == 0) ++ break; ++ ++ return np; ++} ++EXPORT_SYMBOL(of_find_node_by_type); ++ ++struct device_node *of_find_compatible_node(struct device_node *from, ++ const char *type, const char *compatible) ++{ ++ struct device_node *np; ++ ++ np = from ? from->allnext : allnodes; ++ for (; np != 0; np = np->allnext) { ++ if (type != NULL ++ && !(np->type != 0 && strcmp(np->type, type) == 0)) ++ continue; ++ if (of_device_is_compatible(np, compatible)) ++ break; ++ } ++ ++ return np; ++} ++EXPORT_SYMBOL(of_find_compatible_node); ++ ++struct property *of_find_property(const struct device_node *np, ++ const char *name, ++ int *lenp) ++{ ++ struct property *pp; ++ ++ for (pp = np->properties; pp != 0; pp = pp->next) { ++ if (strcasecmp(pp->name, name) == 0) { ++ if (lenp != 0) ++ *lenp = pp->length; ++ break; ++ } ++ } ++ return pp; ++} ++EXPORT_SYMBOL(of_find_property); ++ ++/* ++ * Find a property with a given name for a given node ++ * and return the value. ++ */ ++const void *of_get_property(const struct device_node *np, const char *name, ++ int *lenp) ++{ ++ struct property *pp = of_find_property(np,name,lenp); ++ return pp ? pp->value : NULL; ++} ++EXPORT_SYMBOL(of_get_property); ++ ++int of_getintprop_default(struct device_node *np, const char *name, int def) ++{ ++ struct property *prop; ++ int len; ++ ++ prop = of_find_property(np, name, &len); ++ if (!prop || len != 4) ++ return def; ++ ++ return *(int *) prop->value; ++} ++EXPORT_SYMBOL(of_getintprop_default); ++ ++int of_n_addr_cells(struct device_node *np) ++{ ++ const int* ip; ++ do { ++ if (np->parent) ++ np = np->parent; ++ ip = of_get_property(np, "#address-cells", NULL); ++ if (ip != NULL) ++ return *ip; ++ } while (np->parent); ++ /* No #address-cells property for the root node, default to 2 */ ++ return 2; ++} ++EXPORT_SYMBOL(of_n_addr_cells); ++ ++int of_n_size_cells(struct device_node *np) ++{ ++ const int* ip; ++ do { ++ if (np->parent) ++ np = np->parent; ++ ip = of_get_property(np, "#size-cells", NULL); ++ if (ip != NULL) ++ return *ip; ++ } while (np->parent); ++ /* No #size-cells property for the root node, default to 1 */ ++ return 1; ++} ++EXPORT_SYMBOL(of_n_size_cells); ++ ++int of_set_property(struct device_node *dp, const char *name, void *val, int len) ++{ ++ return -EIO; ++} ++EXPORT_SYMBOL(of_set_property); ++ ++static unsigned int prom_early_allocated; ++ ++static void * __init prom_early_alloc(unsigned long size) ++{ ++ void *ret; ++ ++ ret = kmalloc(size, GFP_KERNEL); ++ if (ret != NULL) ++ memset(ret, 0, size); ++ else ++ printk(KERN_ERR "ACK! couldn't allocate prom memory!\n"); ++ ++ prom_early_allocated += size; ++ ++ return ret; ++} ++ ++static int is_root_node(const struct device_node *dp) ++{ ++ if (!dp) ++ return 0; ++ ++ return (dp->parent == NULL); ++} ++ ++static char * __init build_path_component(struct device_node *dp) ++{ ++ int pathlen; ++ char *n, *i; ++ ++ if (ofw("package-to-path", 3, 1, dp->node, NULL, 0, &pathlen)) { ++ printk(KERN_ERR "PROM: unable to get path name from OFW!\n"); ++ return "ERROR"; ++ } ++ n = prom_early_alloc(pathlen + 1); ++ if (ofw("package-to-path", 3, 1, dp->node, n, pathlen+1, &pathlen)) ++ printk(KERN_ERR "PROM: unable to get path name from OFW\n"); ++ ++ if ((i = strrchr(n, '/'))) ++ n = ++i; /* we only want the file name */ ++ return n; ++} ++ ++static char * __init build_full_name(struct device_node *dp) ++{ ++ int len, ourlen, plen; ++ char *n; ++ ++ plen = strlen(dp->parent->full_name); ++ ourlen = strlen(dp->path_component_name); ++ len = ourlen + plen + 2; ++ ++ n = prom_early_alloc(len); ++ strcpy(n, dp->parent->full_name); ++ if (!is_root_node(dp->parent)) { ++ strcpy(n + plen, "/"); ++ plen++; ++ } ++ strcpy(n + plen, dp->path_component_name); ++ ++ return n; ++} ++ ++static struct property * __init build_one_prop(phandle node, char *prev, char *special_name, void *special_val, int special_len) ++{ ++ static struct property *tmp = NULL; ++ struct property *p; ++ ++ if (tmp) { ++ p = tmp; ++ memset(p, 0, sizeof(*p) + 32); ++ tmp = NULL; ++ } else { ++ p = prom_early_alloc(sizeof(struct property) + 32); ++ } ++ ++ p->name = (char *) (p + 1); ++ if (special_name) { ++ strcpy(p->name, special_name); ++ p->length = special_len; ++ p->value = prom_early_alloc(special_len); ++ memcpy(p->value, special_val, special_len); ++ } else { ++ int fl; ++ if (prev == NULL) { ++ if (ofw("nextprop", 3, 1, node, "", p->name, &fl)) { ++ printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__); ++ return NULL; ++ } ++ } else { ++ if (ofw("nextprop", 3, 1, node, prev, p->name, &fl)) { ++ printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__); ++ return NULL; ++ } ++ } ++ if (strlen(p->name) == 0 || fl != 1) { ++ tmp = p; ++ return NULL; ++ } ++ if (ofw("getproplen", 2, 1, node, p->name, &p->length)) { ++ printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__); ++ return NULL; ++ } ++ if (p->length <= 0) { ++ p->length = 0; ++ } else { ++ p->value = prom_early_alloc(p->length + 1); ++ if (ofw("getprop", 4, 1, node, p->name, p->value, p->length, &p->length)) { ++ printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__); ++ return NULL; ++ } ++ ((unsigned char *)p->value)[p->length] = '\0'; ++ } ++ } ++ return p; ++} ++ ++static struct property * __init build_prop_list(phandle node) ++{ ++ struct property *head, *tail; ++ ++ head = tail = build_one_prop(node, NULL, ++ ".node", &node, sizeof(node)); ++ ++ tail->next = build_one_prop(node, NULL, NULL, NULL, 0); ++ tail = tail->next; ++ while(tail) { ++ tail->next = build_one_prop(node, tail->name, ++ NULL, NULL, 0); ++ tail = tail->next; ++ } ++ ++ return head; ++} ++ ++static char * __init get_one_property(phandle node, const char *name) ++{ ++ char *buf = ""; ++ int len; ++ ++ if (ofw("getproplen", 2, 1, node, name, &len)) { ++ printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__); ++ return NULL; ++ } ++ if (len > 0) { ++ buf = prom_early_alloc(len); ++ if (ofw("getprop", 4, 1, node, name, buf, len, &len)) { ++ printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__); ++ return NULL; ++ } ++ } ++ ++ return buf; ++} ++ ++static struct device_node * __init create_node(phandle node, struct device_node *parent) ++{ ++ struct device_node *dp; ++ ++ if (!node) ++ return NULL; ++ ++ dp = prom_early_alloc(sizeof(*dp)); ++ dp->parent = parent; ++ ++ kref_init(&dp->kref); ++ ++ dp->name = get_one_property(node, "name"); ++ dp->type = get_one_property(node, "device_type"); ++ dp->node = node; ++ ++ dp->properties = build_prop_list(node); ++ ++ return dp; ++} ++ ++static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp) ++{ ++ struct device_node *ret = NULL, *prev_sibling = NULL; ++ struct device_node *dp; ++ u32 child; ++ ++ while (1) { ++ dp = create_node(node, parent); ++ if (!dp) ++ break; ++ ++ if (prev_sibling) ++ prev_sibling->sibling = dp; ++ ++ if (!ret) ++ ret = dp; ++ prev_sibling = dp; ++ ++ *(*nextp) = dp; ++ *nextp = &dp->allnext; ++ ++ dp->path_component_name = build_path_component(dp); ++ dp->full_name = build_full_name(dp); ++ ++ if (ofw("child", 1, 1, node, &child)) { ++ printk(KERN_ERR "PROM: %s: fetching child failed!\n", __func__); ++ return NULL; ++ } ++ dp->child = build_tree(dp, child, nextp); ++ ++ if (ofw("peer", 1, 1, node, &node)) { ++ printk(KERN_ERR "PROM: %s: fetching peer failed!\n", __func__); ++ return NULL; ++ } ++ } ++ ++ return ret; ++} ++ ++static phandle root_node; ++ ++void __init prom_build_devicetree(void) ++{ ++ struct device_node **nextp; ++ u32 child; ++ ++ if (ofw("peer", 1, 1, 0, &root_node)) { ++ printk(KERN_ERR "PROM: unable to get root node from OFW!\n"); ++ return; ++ } ++ ++ allnodes = create_node(root_node, NULL); ++ allnodes->path_component_name = ""; ++ allnodes->full_name = "/"; ++ ++ nextp = &allnodes->allnext; ++ if (ofw("child", 1, 1, allnodes->node, &child)) { ++ printk(KERN_ERR "PROM: unable to get child node from OFW!\n"); ++ return; ++ } ++ allnodes->child = build_tree(allnodes, child, &nextp); ++ printk("PROM: Built device tree with %u bytes of memory.\n", ++ prom_early_allocated); ++} +diff -purN linux_2.6.24_org/arch/x86/pci/olpc.c linux_2.6.24_olpc/arch/x86/pci/olpc.c +--- linux_2.6.24_org/arch/x86/pci/olpc.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/arch/x86/pci/olpc.c 2008-02-15 18:59:22.000000000 +0000 +@@ -0,0 +1,298 @@ ++/* ++ * olpcpci.c - Low-level PCI config space access for OLPC systems ++ * without the VSA PCI virtualization software. ++ * ++ * The AMD Geode chipset (GX2 processor, cs5536 I/O companion device) ++ * has some I/O functions (display, southbridge, sound, USB HCIs, etc) ++ * that more or less behave like PCI devices, but the hardware doesn't ++ * directly implement the PCI configuration space headers. AMD provides ++ * "VSA" (Virtual System Architecture) software that emulates PCI config ++ * space for these devices, by trapping I/O accesses to PCI config register ++ * (CF8/CFC) and running some code in System Management Mode interrupt state. ++ * On the OLPC platform, we don't want to use that VSA code because ++ * (a) it slows down suspend/resume, and (b) recompiling it requires special ++ * compilers that are hard to get. So instead of letting the complex VSA ++ * code simulate the PCI config registers for the on-chip devices, we ++ * just simulate them the easy way, by inserting the code into the ++ * pci_write_config and pci_read_config path. Most of the config registers ++ * are read-only anyway, so the bulk of the simulation is just table lookup. ++ */ ++ ++#include ++#include ++#include ++#include ++#include "pci.h" ++ ++static int is_lx; ++ ++/* ++ * In the tables below, the first two line (8 longwords) are the ++ * size masks that are used when the higher level PCI code determines ++ * the size of the region by writing ~0 to a base address register ++ * and reading back the result. ++ * ++ * The following lines are the values that are read during normal ++ * PCI config access cycles, i.e. not after just having written ++ * ~0 to a base address register. ++ */ ++ ++static const u32 lxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x281022 , 0x2200005 , 0x6000021 , 0x80f808 , /* AMD Vendor ID */ ++ 0x0 , 0x0 , 0x0 , 0x0 , /* No virtual registers, hence no BAR for them */ ++ 0x0 , 0x0 , 0x0 , 0x28100b , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 gxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ ++ 0xfffffffd , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x28100b , 0x2200005 , 0x6000021 , 0x80f808 , /* NSC Vendor ID */ ++ 0xac1d , 0x0 , 0x0 , 0x0 , /* I/O BAR - base of virtual registers */ ++ 0x0 , 0x0 , 0x0 , 0x28100b , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 lxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ ++ 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x20811022 , 0x2200003 , 0x3000000 , 0x0 , /* AMD Vendor ID */ ++ 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */ ++ 0xfe00c000 , 0x0 , 0x0 , 0x30100b , /* VIP */ ++ 0x0 , 0x0 , 0x0 , 0x10e , /* INTA, IRQ14 for graphics accel */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 gxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ ++ 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x30100b , 0x2200003 , 0x3000000 , 0x0 , /* NSC Vendor ID */ ++ 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */ ++ 0x0 , 0x0 , 0x0 , 0x30100b , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 aes_hdr[] = { /* dev 1 function 2 - devfn = 0xa */ ++ 0xffffc000 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x20821022 , 0x2a00006 , 0x10100000 , 0x8 , /* NSC Vendor ID */ ++ 0xfe010000 , 0x0 , 0x0 , 0x0 , /* AES registers */ ++ 0x0 , 0x0 , 0x0 , 0x20821022 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++ ++static const u32 isa_hdr[] = { /* dev f function 0 - devfn = 78 */ ++ 0xfffffff9 , 0xffffff01 , 0xffffffc1 , 0xffffffe1 , ++ 0xffffff81 , 0xffffffc1 , 0x0 , 0x0 , ++ ++ 0x20901022 , 0x2a00049 , 0x6010003 , 0x802000 , ++ 0x18b1 , 0x1001 , 0x1801 , 0x1881 , /* SMB-8 GPIO-256 MFGPT-64 IRQ-32 */ ++ 0x1401 , 0x1841 , 0x0 , 0x20901022 , /* PMS-128 ACPI-64 */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0xaa5b , /* interrupt steering */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 ac97_hdr[] = { /* dev f function 3 - devfn = 7b */ ++ 0xffffff81 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x20931022 , 0x2a00041 , 0x4010001 , 0x0 , ++ 0x1481 , 0x0 , 0x0 , 0x0 , /* I/O BAR-128 */ ++ 0x0 , 0x0 , 0x0 , 0x20931022 , ++ 0x0 , 0x0 , 0x0 , 0x205 , /* IntB , IRQ5 */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 ohci_hdr[] = { /* dev f function 4 - devfn = 7c */ ++ 0xfffff000 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x20941022 , 0x2300006 , 0xc031002 , 0x0 , ++ 0xfe01a000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */ ++ 0x0 , 0x0 , 0x0 , 0x20941022 , ++ 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */ ++ 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 ehci_hdr[] = { /* dev f function 4 - devfn = 7d */ ++ 0xfffff000 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x20951022 , 0x2300006 , 0xc032002 , 0x0 , ++ 0xfe01b000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */ ++ 0x0 , 0x0 , 0x0 , 0x20951022 , ++ 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */ ++ 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */ ++#if 0 ++ 0x1 , 0x40080000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */ ++#endif ++ 0x01000001 , 0x00000000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */ ++ 0x2020 , 0x0 , 0x0 , 0x0 , /* (EHCI page 8) 60 SBRN (R/O), 61 FLADJ (R/W), PORTWAKECAP */ ++}; ++ ++static u32 ff_loc = ~0; ++static u32 zero_loc = 0; ++ ++static int bar_probing = 0; /* Set after a write of ~0 to a BAR */ ++ ++#define NB_SLOT 0x1 /* Northbridge - GX chip - Device 1 */ ++#define SB_SLOT 0xf /* Southbridge - CS5536 chip - Device F */ ++#define SIMULATED(bus, devfn) (((bus) == 0) && ((PCI_SLOT(devfn) == NB_SLOT) || (PCI_SLOT(devfn) == SB_SLOT))) ++ ++static u32 *hdr_addr(const u32 *hdr, int reg) ++{ ++ u32 addr; ++ ++ /* ++ * This is a little bit tricky. The header maps consist of ++ * 0x20 bytes of size masks, followed by 0x70 bytes of header data. ++ * In the normal case, when not probing a BAR's size, we want ++ * to access the header data, so we add 0x20 to the reg offset, ++ * thus skipping the size mask area. ++ * In the BAR probing case, we want to access the size mask for ++ * the BAR, so we subtract 0x10 (the config header offset for ++ * BAR0), and don't skip the size mask area. ++ */ ++ ++ addr = (u32)hdr + reg + (bar_probing ? -0x10 : 0x20); ++ ++ bar_probing = 0; ++ return (u32 *)addr; ++} ++ ++static int pci_olpc_read(unsigned int seg, unsigned int bus, ++ unsigned int devfn, int reg, int len, u32 *value) ++{ ++ u32 *addr; ++ ++ /* Use the hardware mechanism for non-simulated devices */ ++ if (!SIMULATED(bus, devfn)) ++ return pci_conf1_read(seg, bus, devfn, reg, len, value); ++ ++ /* ++ * No device has config registers past 0x70, so we save table space ++ * by not storing entries for the nonexistent registers ++ */ ++ if (reg >= 0x70) ++ addr = &zero_loc; ++ else { ++ switch (devfn) { ++ case 0x8: ++ addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg); ++ break; ++ case 0x9: ++ addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg); ++ break; ++ case 0xa: ++ addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc; ++ break; ++ case 0x78: ++ addr = hdr_addr(isa_hdr, reg); ++ break; ++ case 0x7b: ++ addr = hdr_addr(ac97_hdr, reg); ++ break; ++ case 0x7c: ++ addr = hdr_addr(ohci_hdr, reg); ++ break; ++ case 0x7d: ++ addr = hdr_addr(ehci_hdr, reg); ++ break; ++ default: ++ addr = &ff_loc; ++ break; ++ } ++ } ++ switch (len) { ++ case 1: ++ *value = *(u8 *) addr; ++ break; ++ case 2: ++ *value = *(u16 *) addr; ++ break; ++ case 4: ++ *value = *addr; ++ break; ++ default: ++ BUG(); ++ } ++ ++ return 0; ++} ++ ++static int pci_olpc_write(unsigned int seg, unsigned int bus, ++ unsigned int devfn, int reg, int len, u32 value) ++{ ++ /* Use the hardware mechanism for non-simulated devices */ ++ if (!SIMULATED(bus, devfn)) ++ return pci_conf1_write(seg, bus, devfn, reg, len, value); ++ ++ /* XXX we may want to extend this to simulate EHCI power management */ ++ ++ /* ++ * Mostly we just discard writes, but if the write is a size probe ++ * (i.e. writing ~0 to a BAR), we remember it and arrange to return ++ * the appropriate size mask on the next read. This is cheating ++ * to some extent, because it depends on the fact that the next ++ * access after such a write will always be a read to the same BAR. ++ */ ++ ++ if ((reg >= 0x10) && (reg < 0x2c)) { ++ /* Write is to a BAR */ ++ if (value == ~0) ++ bar_probing = 1; ++ } else { ++ /* ++ * No warning on writes to ROM BAR, CMD, LATENCY_TIMER, ++ * CACHE_LINE_SIZE, or PM registers. ++ */ ++ if ((reg != 0x30) && (reg != 0x04) && (reg != 0x0d) && ++ (reg != 0x0c) && (reg != 0x44)) ++ printk(KERN_WARNING "OLPC PCI: Config write to devfn %x reg %x value %x\n", devfn, reg, value); ++ } ++ ++ return 0; ++} ++ ++static struct pci_raw_ops pci_olpc_conf = { ++ .read = pci_olpc_read, ++ .write = pci_olpc_write, ++}; ++ ++void __init pci_olpc_init(void) ++{ ++ if (!machine_is_olpc() || olpc_has_vsa()) ++ return; ++ ++ printk(KERN_INFO "PCI: Using configuration type OLPC\n"); ++ raw_pci_ops = &pci_olpc_conf; ++ is_lx = is_geode_lx(); ++} +diff -purN linux_2.6.24_org/Documentation/kernel-parameters.txt linux_2.6.24_olpc/Documentation/kernel-parameters.txt +--- linux_2.6.24_org/Documentation/kernel-parameters.txt 2008-02-15 20:12:29.000000000 +0000 ++++ linux_2.6.24_olpc/Documentation/kernel-parameters.txt 2008-02-15 18:59:54.000000000 +0000 +@@ -1244,6 +1244,13 @@ and is between 256 and 4096 characters. + + nr_uarts= [SERIAL] maximum number of UARTs to be registered. + ++ olpc_ec_timeout= [OLPC] ms delay when issuing EC commands ++ Rather than timing out after 20 ms if an EC ++ command is not properly ACKed, override the length ++ of the timeout. We have interrupts disabled while ++ waiting for the ACK, so if this is set too high ++ interrupts *may* be lost! ++ + opl3= [HW,OSS] + Format: + +diff -purN linux_2.6.24_org/drivers/base/dd.c linux_2.6.24_olpc/drivers/base/dd.c +--- linux_2.6.24_org/drivers/base/dd.c 2008-02-15 20:11:29.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/base/dd.c 2008-02-15 18:58:46.000000000 +0000 +@@ -293,7 +293,6 @@ static void __device_release_driver(stru + if (drv) { + driver_sysfs_remove(dev); + sysfs_remove_link(&dev->kobj, "driver"); +- klist_remove(&dev->knode_driver); + + if (dev->bus) + blocking_notifier_call_chain(&dev->bus->bus_notifier, +@@ -306,6 +305,7 @@ static void __device_release_driver(stru + drv->remove(dev); + devres_release_all(dev); + dev->driver = NULL; ++ klist_remove(&dev->knode_driver); + put_driver(drv); + } + } +diff -purN linux_2.6.24_org/drivers/char/vt_ioctl.c linux_2.6.24_olpc/drivers/char/vt_ioctl.c +--- linux_2.6.24_org/drivers/char/vt_ioctl.c 2008-02-15 20:11:48.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/char/vt_ioctl.c 2008-02-15 18:59:11.000000000 +0000 +@@ -38,6 +38,9 @@ + char vt_dont_switch; + extern struct tty_driver *console_driver; + ++/* Add a notifier chain to inform drivers of a VT_TEXT/VT_GRAPHICS switch */ ++RAW_NOTIFIER_HEAD(console_notifier_list); ++ + #define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count) + #define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons) + +@@ -492,6 +495,14 @@ int vt_ioctl(struct tty_struct *tty, str + vc->vc_mode = (unsigned char) arg; + if (console != fg_console) + return 0; ++ ++ /* Notify listeners if the current fg_console has switched */ ++ ++ raw_notifier_call_chain(&console_notifier_list, ++ (arg == KD_TEXT) ? ++ CONSOLE_EVENT_SWITCH_TEXT : ++ CONSOLE_EVENT_SWITCH_GRAPHICS, 0); ++ + /* + * explicitly blank/unblank the screen if switching modes + */ +diff -purN linux_2.6.24_org/drivers/i2c/busses/scx200_acb.c linux_2.6.24_olpc/drivers/i2c/busses/scx200_acb.c +--- linux_2.6.24_org/drivers/i2c/busses/scx200_acb.c 2008-02-15 20:11:33.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/i2c/busses/scx200_acb.c 2008-02-15 18:58:49.000000000 +0000 +@@ -46,6 +46,10 @@ static int base[MAX_DEVICES] = { 0x820, + module_param_array(base, int, NULL, 0); + MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers"); + ++static unsigned int smbclk = 0x70; ++module_param(smbclk, uint, 0); ++MODULE_PARM_DESC(smbclk, "Specify the SMB_CLK value"); ++ + #define POLL_TIMEOUT (HZ/5) + + enum scx200_acb_state { +@@ -108,6 +112,7 @@ struct scx200_acb_iface { + #define ACBADDR (iface->base + 4) + #define ACBCTL2 (iface->base + 5) + #define ACBCTL2_ENABLE 0x01 ++#define ACBCTL3 (iface->base + 6) + + /************************************************************************/ + +@@ -392,11 +397,13 @@ static __init int scx200_acb_probe(struc + { + u8 val; + +- /* Disable the ACCESS.bus device and Configure the SCL +- frequency: 16 clock cycles */ +- outb(0x70, ACBCTL2); ++ /* Disable the ACCESS.bus device and Configure the SCL */ ++ ++ outb((smbclk & 0x7F) << 1, ACBCTL2); ++ ++ outb((smbclk >> 7) & 0xFF, ACBCTL3); + +- if (inb(ACBCTL2) != 0x70) { ++ if (inb(ACBCTL2) != ((smbclk & 0x7F) << 1)) { + pr_debug(NAME ": ACBCTL2 readback failed\n"); + return -ENXIO; + } +diff -purN linux_2.6.24_org/drivers/input/keyboard/atkbd.c linux_2.6.24_olpc/drivers/input/keyboard/atkbd.c +--- linux_2.6.24_org/drivers/input/keyboard/atkbd.c 2008-02-15 20:11:51.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/input/keyboard/atkbd.c 2008-02-15 18:59:14.000000000 +0000 +@@ -63,12 +63,25 @@ static int atkbd_extra; + module_param_named(extra, atkbd_extra, bool, 0); + MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards"); + ++#define ATKBD_KEY_UNKNOWN 0 ++#define ATKBD_KEY_NULL 0xFF0000FF ++ ++#define ATKBD_SCR_1 0xFF0000FE ++#define ATKBD_SCR_2 0xFF0000FD ++#define ATKBD_SCR_4 0xFF0000FC ++#define ATKBD_SCR_8 0xFF0000FB ++#define ATKBD_SCR_CLICK 0xFF0000FA ++#define ATKBD_SCR_LEFT 0xFF0000F9 ++#define ATKBD_SCR_RIGHT 0xFF0000F8 ++ ++#define ATKBD_SPECIAL 0xFF0000F8 ++ + /* + * Scancode to keycode tables. These are just the default setting, and + * are loadable via an userland utility. + */ + +-static unsigned char atkbd_set2_keycode[512] = { ++static unsigned int atkbd_set2_keycode[512] = { + + #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES + +@@ -87,11 +100,17 @@ static unsigned char atkbd_set2_keycode[ + 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99, + + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, +- 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125, ++ ++ 217,100,ATKBD_KEY_NULL, 0, 97,165, 0, 0, ++ 156, 0, 0, 0, 0, 0, 0,125, ++ + 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127, + 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142, + 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0, +- 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0, ++ ++ 226, 0, 0, 0, 0, 0, 0, 0, ++ 0,ATKBD_KEY_NULL, 96, 0, 0, 0,143, 0, ++ + 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112, + 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0, + +@@ -150,19 +169,6 @@ static unsigned char atkbd_unxlate_table + #define ATKBD_RET_HANGEUL 0xf2 + #define ATKBD_RET_ERR 0xff + +-#define ATKBD_KEY_UNKNOWN 0 +-#define ATKBD_KEY_NULL 255 +- +-#define ATKBD_SCR_1 254 +-#define ATKBD_SCR_2 253 +-#define ATKBD_SCR_4 252 +-#define ATKBD_SCR_8 251 +-#define ATKBD_SCR_CLICK 250 +-#define ATKBD_SCR_LEFT 249 +-#define ATKBD_SCR_RIGHT 248 +- +-#define ATKBD_SPECIAL 248 +- + #define ATKBD_LED_EVENT_BIT 0 + #define ATKBD_REP_EVENT_BIT 1 + +@@ -174,7 +180,7 @@ static unsigned char atkbd_unxlate_table + #define ATKBD_XL_HANJA 0x20 + + static struct { +- unsigned char keycode; ++ unsigned int keycode; + unsigned char set2; + } atkbd_scroll_keys[] = { + { ATKBD_SCR_1, 0xc5 }, +@@ -200,7 +206,7 @@ struct atkbd { + char phys[32]; + + unsigned short id; +- unsigned char keycode[512]; ++ unsigned int keycode[512]; + unsigned char set; + unsigned char translated; + unsigned char extra; +@@ -351,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struc + unsigned int code = data; + int scroll = 0, hscroll = 0, click = -1, add_release_event = 0; + int value; +- unsigned char keycode; ++ unsigned int keycode; + + #ifdef ATKBD_DEBUG + printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags); +@@ -856,9 +862,11 @@ static void atkbd_set_keycode_table(stru + atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode; + } + } else if (atkbd->set == 3) { +- memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode)); ++ for (i = 0; i < ARRAY_SIZE(atkbd_set3_keycode); i++) ++ atkbd->keycode[i] = atkbd_set3_keycode[i]; + } else { +- memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode)); ++ for (i = 0; i < ARRAY_SIZE(atkbd_set2_keycode); i++) ++ atkbd->keycode[i] = atkbd_set2_keycode[i]; + + if (atkbd->scroll) + for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) +@@ -930,8 +938,8 @@ static void atkbd_set_device_attrs(struc + } + + input_dev->keycode = atkbd->keycode; +- input_dev->keycodesize = sizeof(unsigned char); +- input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode); ++ input_dev->keycodesize = sizeof(unsigned int); ++ input_dev->keycodemax = ARRAY_SIZE(atkbd->keycode); + + for (i = 0; i < 512; i++) + if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL) +@@ -1022,6 +1030,10 @@ static int atkbd_connect(struct serio *s + return err; + } + ++#ifdef CONFIG_OLPC ++#include ++#endif ++ + /* + * atkbd_reconnect() tries to restore keyboard into a sane state and is + * most likely called on resume. +@@ -1032,6 +1044,12 @@ static int atkbd_reconnect(struct serio + struct atkbd *atkbd = serio_get_drvdata(serio); + struct serio_driver *drv = serio->drv; + ++#ifdef CONFIG_OLPC ++ if (olpc_board_at_least(olpc_board_pre(0xb3))) ++ if (serio->dev.power.power_state.event != PM_EVENT_ON) ++ return 0; ++#endif ++ + if (!atkbd || !drv) { + printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n"); + return -1; +diff -purN linux_2.6.24_org/drivers/input/mouse/Kconfig linux_2.6.24_olpc/drivers/input/mouse/Kconfig +--- linux_2.6.24_org/drivers/input/mouse/Kconfig 2008-02-15 20:11:51.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/input/mouse/Kconfig 2008-02-15 18:59:14.000000000 +0000 +@@ -96,6 +96,16 @@ config MOUSE_PS2_TOUCHKIT + + If unsure, say N. + ++config MOUSE_PS2_OLPC ++ bool "OLPC PS/2 mouse protocol extension" if EMBEDDED ++ default n ++ depends on MOUSE_PS2 && OLPC ++ ---help--- ++ Say Y here if you have an OLPC PS/2 touchpad connected to ++ your system. ++ ++ If unsure, say N. ++ + config MOUSE_SERIAL + tristate "Serial mouse" + select SERIO +diff -purN linux_2.6.24_org/drivers/input/mouse/Makefile linux_2.6.24_olpc/drivers/input/mouse/Makefile +--- linux_2.6.24_org/drivers/input/mouse/Makefile 2008-02-15 20:11:51.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/input/mouse/Makefile 2008-02-15 18:59:14.000000000 +0000 +@@ -24,3 +24,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) += + psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o + psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o + psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o ++psmouse-$(CONFIG_MOUSE_PS2_OLPC) += olpc.o +diff -purN linux_2.6.24_org/drivers/input/mouse/olpc.c linux_2.6.24_olpc/drivers/input/mouse/olpc.c +--- linux_2.6.24_org/drivers/input/mouse/olpc.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/drivers/input/mouse/olpc.c 2008-02-15 18:59:14.000000000 +0000 +@@ -0,0 +1,837 @@ ++/* ++ * OLPC touchpad PS/2 mouse driver ++ * ++ * Copyright (c) 2006-2008 One Laptop Per Child ++ * Authors: ++ * Zephaniah E. Hull ++ * Andres Salomon ++ * ++ * This driver is partly based on the ALPS driver, which is: ++ * ++ * Copyright (c) 2003 Neil Brown ++ * Copyright (c) 2003-2005 Peter Osterlund ++ * Copyright (c) 2004 Dmitry Torokhov ++ * Copyright (c) 2005 Vojtech Pavlik ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++/* ++ * The touchpad on the OLPC is fairly wide, with the entire area usable ++ * as a tablet (Pen Tablet/PT), and the center 1/3rd also usable as a ++ * touchpad (Glide Sensor/GS). The spec from ALPS is available from ++ * . It refers to this ++ * device as HGPK (Hybrid GS, PT, and Keymatrix). ++ * ++ * Earlier version of the device had simultaneous reporting; however, that ++ * was removed. Instead, the device now reports packets in one mode, and ++ * tells the driver when a mode switch needs to happen. ++ */ ++ ++#define DEBUG ++#include ++#include ++#include ++#include ++#include ++ ++#include "psmouse.h" ++#include "olpc.h" ++ ++static int tpdebug; ++module_param(tpdebug, int, 0644); ++ ++static int ignore_delta = 60; ++module_param(ignore_delta, int, 0644); ++MODULE_PARM_DESC(ignore_delta, "ignore packets that cause an X or Y delta larger than this value."); ++ ++/* ++ * With older hardware, a finger-up event is sometimes not sent. If it's been ++ * more than 50mS since the last packet, we can safely assume that there was ++ * a finger-up event that we never received. ++ */ ++static void hgpk_fingerup_hack(struct psmouse *psmouse, struct hgpk_packet *p) ++{ ++ struct hgpk_data *priv = psmouse->private; ++ struct timeval now_tv; ++ s64 now_ns; ++ ++ if (psmouse->model >= HGPK_MODEL_C) ++ return; ++ ++ if (p->gs_down || p->pt_down) { ++ do_gettimeofday(&now_tv); ++ now_ns = timeval_to_ns(&now_tv); ++ ++ if (priv->late && now_ns >= priv->late) { ++ struct input_dev *pt = psmouse->dev; ++ struct input_dev *gs = priv->gs; ++ ++ input_report_key(pt, BTN_TOUCH, 0); ++ input_report_key(gs, BTN_TOUCH, 0); ++ input_sync(pt); ++ input_sync(gs); ++ hgpk_dbg(psmouse, "Missing finger-up packet detected, " ++ "working around buggy hardware.\n"); ++ } ++ priv->late = now_ns + (50 * NSEC_PER_MSEC); ++ } else ++ priv->late = 0; ++} ++ ++/* ++ * C and D series touchpads send an extra finger-up packet to ensure we've ++ * seen it. That's all well and good, but for some uncomprehensible reason ++ * they sometimes also get stuck in a state where they also send an ++ * extra finger-down packet with coordinates of x=0, y=0. This royally ++ * screws relative positioning; end users see it as the touchpad jumping ++ * around when they first put their finger down. This works around that. ++ * ++ * *Sigh*. ALPS.. ++ */ ++static void hgpk_fingerdown_hack(struct psmouse *psmouse, struct hgpk_packet *p) ++{ ++ if (psmouse->model < HGPK_MODEL_C) ++ return; ++ ++ /* we only care about x=0, y=0 packets */ ++ if (p->x != 0 || p->y != 0) ++ return; ++ ++ /* ++ * if we're a gs_down packet but we were not previously down, ++ * we're going to assume that this is one of those spurious packets ++ * that needs to be worked around. ++ */ ++ if (p->gs_down && !test_bit(BTN_TOUCH, p->dev->key)) { ++ hgpk_dbg(psmouse, "spurious GS finger-down packet\n"); ++ p->gs_down = 0; ++ } else if (p->pt_down && !test_bit(BTN_TOUCH, p->dev->key)) { ++ hgpk_dbg(psmouse, "spurious PT finger-down packet\n"); ++ p->pt_down = 0; ++ } ++} ++ ++/* ++ * In general, we have lots of calibration problems that manifest ++ * themselves as jumpy mouse pointers. Miscalibration, capacitance issues ++ * with the hardware, etc; these make the touchpad detect errant packets ++ * at random places all over the place. Since we don't expect large deltas ++ * to ever actually be useful, we'll large axis changes that go over our ++ * threshold. ++ */ ++static void hgpk_big_delta_hack(struct psmouse *psmouse, struct hgpk_packet *p) ++{ ++ struct hgpk_data *priv = psmouse->private; ++ struct input_dev *dev = p->dev; ++ ++ /* afaik, this happens on all hardware */ ++ ++ /* ignore finger-up packets */ ++ if (!p->pt_down && !p->gs_down) ++ goto done; ++ ++ /* ensure that we're not a finger-down packet */ ++ if ((p->pt_down && !test_bit(BTN_TOUCH, dev->key)) || ++ (p->gs_down && !test_bit(BTN_TOUCH, dev->key))) ++ goto done; ++ ++ if (abs(dev->abs[ABS_X] - p->x) > ignore_delta || ++ abs(dev->abs[ABS_Y] - p->y) > ignore_delta) { ++ hgpk_dbg(psmouse, "axis change (%d,%d) => (%d,%d) is over " ++ "delta threshold\n", dev->abs[ABS_X], ++ dev->abs[ABS_Y], p->x, p->y); ++ input_report_key(dev, BTN_TOUCH, 0); ++ input_sync(dev); ++ ++ ++ /* two in a row is a pretty good indicator of miscalibration */ ++ if (priv->axis_errors++) { ++ /* wait 2s for finger removal, and then recalibrate */ ++ queue_delayed_work(kpsmoused_wq, &priv->recalib_wq, ++ msecs_to_jiffies(2000)); ++ priv->axis_errors = 0; ++ } ++ return; ++ } ++done: ++ priv->axis_errors = 0; ++} ++ ++/* ++ * This is my favorite touchpad hardware bug. I'm entirely not sure what ++ * triggers it (I've seen it triggered while the laptop was left on overnight, ++ * but my cat could have very well been using it/sleeping on it). However, ++ * the touchpad will randomly get stuck in a state where it constantly spews ++ * packets without a finger being on it. A recalibration will fix it, but ++ * without that it will go on for days (auto-recalibration doesn't catch it, ++ * either). The packets tend to either have the same coordinates, or be ++ * 1px away from each other; ie, (283,139,6) -> (284,139,5) -> (285,139,5) -> ++ * (286,139,6) -> (286,139,6) -> etc. We have a number of workarounds here.. ++ */ ++static void hgpk_spewing_hack(struct psmouse *psmouse, struct hgpk_packet *p) ++{ ++ struct hgpk_data *priv = psmouse->private; ++ struct input_dev *dev = p->dev; ++ int repeat_axes; ++ ++ if (psmouse->model < HGPK_MODEL_C) ++ return; ++ ++ /* ignore 0, 0 packets */ ++ if (p->x == 0 && p->y == 0) ++ return; ++ ++ /* PT packets don't count */ ++ if (p->pt_down) { ++ priv->repeat_pkts = 0; ++ return; ++ } ++ ++ /* ++ * If we see 2s+ worth of packets that have at least 2 axis deltas of ++ * only 1px, that's a good indication that we're spewing packets. ++ * We're going to ignore z=15, though; that's pretty indicative of ++ * an actual finger on the touchpad just staying still. ++ */ ++ if (p->z == 0 || p->z == 15) ++ goto next_hack; ++ repeat_axes = abs(p->x - dev->abs[ABS_X]) < 2 ? 1 : 0; ++ repeat_axes += abs(p->y - dev->abs[ABS_Y]) < 2 ? 1 : 0; ++ repeat_axes += abs(p->z - dev->abs[ABS_PRESSURE]) < 2 ? 1 : 0; ++ if (repeat_axes > 1) { ++ priv->repeat_pkts++; ++ /* we get 1 packet about every 24mS */ ++ if (priv->repeat_pkts > 83) { ++ queue_delayed_work(kpsmoused_wq, &priv->recalib_wq, 0); ++ priv->repeat_pkts = 0; ++ } ++ } ++ else ++ priv->repeat_pkts = 0; ++ return; ++ ++next_hack: ++ /* ++ * 10s of y and z not changing is another kind of miscalibration. ++ */ ++ repeat_axes = (p->y == dev->abs[ABS_Y]) ? 1 : 0; ++ repeat_axes += (p->z == dev->abs[ABS_PRESSURE]) ? 1 : 0; ++ if (repeat_axes > 1) { ++ priv->repeat_pkts++; ++ if (priv->repeat_pkts > 416) { ++ queue_delayed_work(kpsmoused_wq, &priv->recalib_wq, 0); ++ priv->repeat_pkts = 0; ++ } ++ } ++ else ++ priv->repeat_pkts = 0; ++} ++ ++/* ++ * HGPK Advanced Mode - single-mode format ++ * ++ * byte 0(PT): 1 1 0 0 1 1 1 1 ++ * byte 0(GS): 1 1 1 1 1 1 1 1 ++ * byte 1: 0 x6 x5 x4 x3 x2 x1 x0 ++ * byte 2(PT): 0 0 x9 x8 x7 ? pt-dsw 0 ++ * byte 2(GS): 0 x10 x9 x8 x7 ? gs-dsw pt-dsw ++ * byte 3: 0 y9 y8 y7 1 0 swr swl ++ * byte 4: 0 y6 y5 y4 y3 y2 y1 y0 ++ * byte 5: 0 z6 z5 z4 z3 z2 z1 z0 ++ * ++ * ?'s are not defined in the protocol spec, may vary between models. ++ * ++ * swr/swl are the left/right buttons. ++ * ++ * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a ++ * pen/finger ++ */ ++ ++static int hgpk_validate_byte(unsigned char *packet, int pktcnt) ++{ ++ BUG_ON(pktcnt < 1); ++ ++ if (packet[0] != HGPK_PT && packet[0] != HGPK_GS) ++ return -1; ++ ++ /* bytes 2 - 6 should have 0 in the highest bit */ ++ if (pktcnt >= 2 && pktcnt <= 6 && (packet[pktcnt - 1] & 0x80)) ++ return -1; ++ ++ return 0; ++} ++ ++static void hgpk_decode_packet(struct psmouse *psmouse, struct hgpk_packet *p) ++{ ++ unsigned char *packet = psmouse->packet; ++ ++ BUG_ON(psmouse->pktcnt < 6); ++ ++ p->left = packet[3] & 1; ++ p->right = !!(packet[3] & 2); ++ p->x = packet[1] | ((packet[2] & 0x78) << 4); ++ p->y = packet[4] | ((packet[3] & 0x70) << 3); ++ p->z = packet[5]; ++ ++ if (packet[0] == HGPK_GS) { ++ p->pt_down = !!(packet[2] & 1); ++ p->gs_down = !!(packet[2] & 2); ++ p->dev = ((struct hgpk_data *) psmouse->private)->gs; ++ if (p->pt_down) { ++ /* we miss spurious PT finger-downs if pt_down is set */ ++ p->mode_switch = HGPK_PT; ++ p->pt_down = 0; ++ } else { ++ p->mode_switch = 0; ++ } ++ } else if (packet[0] == HGPK_PT) { ++ p->pt_down = !!(packet[2] & 2); ++ p->gs_down = 0; ++ p->dev = psmouse->dev; ++ p->mode_switch = !p->pt_down ? HGPK_GS : 0; ++ } ++ ++ if (tpdebug) { ++ hgpk_dbg(psmouse, "l=%d r=%d p=%d g=%d x=%d y=%d z=%d m=%x\n", ++ p->left, p->right, p->pt_down, p->gs_down, ++ p->x, p->y, p->z, p->mode_switch); ++ } ++} ++ ++static void hgpk_process_packet_gspt(struct psmouse *psmouse) ++{ ++ struct hgpk_data *priv = psmouse->private; ++ struct input_dev *pt = psmouse->dev; ++ struct input_dev *gs = priv->gs; ++ struct hgpk_packet pkt; ++ ++ hgpk_decode_packet(psmouse, &pkt); ++ ++ hgpk_fingerup_hack(psmouse, &pkt); ++ hgpk_fingerdown_hack(psmouse, &pkt); ++ hgpk_big_delta_hack(psmouse, &pkt); ++ hgpk_spewing_hack(psmouse, &pkt); ++ ++ input_report_key(pt, BTN_LEFT, pkt.left); ++ input_report_key(pt, BTN_RIGHT, pkt.right); ++ input_report_key(pt, BTN_TOUCH, pkt.pt_down); ++ ++ input_report_key(gs, BTN_LEFT, pkt.left); ++ input_report_key(gs, BTN_RIGHT, pkt.right); ++ input_report_key(gs, BTN_TOUCH, pkt.gs_down); ++ ++ input_report_abs(pkt.dev, ABS_X, pkt.x); ++ input_report_abs(pkt.dev, ABS_Y, pkt.y); ++ input_report_abs(pkt.dev, ABS_PRESSURE, pkt.z); ++ ++ input_sync(pt); ++ input_sync(gs); ++ ++ if (priv->recalib_window) { ++ if (time_before(jiffies, priv->recalib_window)) { ++ /* ++ * ugh, got a packet inside our recalibration ++ * window, schedule another recalibration. ++ */ ++ hgpk_dbg(psmouse, "packet inside calibration window, " ++ "queueing another recalibration\n"); ++ queue_delayed_work(kpsmoused_wq, &priv->recalib_wq, ++ msecs_to_jiffies(1000)); ++ } ++ priv->recalib_window = 0; ++ } ++ ++ if (psmouse->model != HGPK_MODEL_A) { ++ if (priv->pending_mode && (!pkt.mode_switch || ++ priv->current_mode == pkt.mode_switch)) { ++ priv->pending_mode = 0; ++ cancel_delayed_work(&priv->switch_wq); ++ } ++ else if (priv->pending_mode != pkt.mode_switch) { ++ priv->pending_mode = pkt.mode_switch; ++ ++ /* allow for spurious mode_switch packets by delaying */ ++ queue_delayed_work(kpsmoused_wq, &priv->switch_wq, ++ msecs_to_jiffies(50)); ++ } ++ } ++} ++ ++static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse) ++{ ++ if (hgpk_validate_byte(psmouse->packet, psmouse->pktcnt)) { ++ hgpk_dbg(psmouse, "%s: (%d) %02x %02x %02x %02x %02x %02x\n", ++ __func__, psmouse->pktcnt, psmouse->packet[0], ++ psmouse->packet[1], psmouse->packet[2], ++ psmouse->packet[3], psmouse->packet[4], ++ psmouse->packet[5]); ++ return PSMOUSE_BAD_DATA; ++ } ++ ++ if (psmouse->pktcnt == 6) { ++ hgpk_process_packet_gspt(psmouse); ++ return PSMOUSE_FULL_PACKET; ++ } ++ ++ return PSMOUSE_GOOD_DATA; ++} ++ ++static int hgpk_force_recalibrate(struct psmouse *psmouse) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ struct hgpk_data *priv = psmouse->private; ++ struct input_dev *pt = psmouse->dev; ++ struct input_dev *gs = priv->gs; ++ ++ /* C-series touchpads added the recalibrate command */ ++ if (psmouse->model < HGPK_MODEL_C) ++ return 0; ++ ++ if (ps2_command(ps2dev, NULL, 0xf5) || ++ ps2_command(ps2dev, NULL, 0xf5) || ++ ps2_command(ps2dev, NULL, 0xe6) || ++ ps2_command(ps2dev, NULL, 0xf5)) ++ return -1; ++ ++ /* send a finger-up event so the cursor doesn't jump around */ ++ input_report_key(pt, BTN_TOUCH, 0); ++ input_report_key(gs, BTN_TOUCH, 0); ++ input_sync(pt); ++ input_sync(gs); ++ ++ /* according to ALPS, 150mS is required for recalibration */ ++ msleep(150); ++ ++ /* ++ * XXX: If a finger is down during this delay, recalibration will ++ * detect capacitance incorrectly. This is a hardware bug, and ++ * we may need to work around that here. ++ */ ++ ++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) ++ return -1; ++ ++ /* ++ * After we recalibrate, we shouldn't get any packets for 2s. If ++ * we do, it's likely that someone's finger was on the touchpad. ++ * If someone's finger *was* on the touchpad, it's probably ++ * miscalibrated. So, we should schedule another recalibration ++ */ ++ priv->recalib_window = jiffies + msecs_to_jiffies(2000); ++ ++ return 0; ++} ++ ++static enum hgpk_model_t hgpk_get_model(struct psmouse *psmouse) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ unsigned char param[3]; ++ ++ /* E7, E7, E7, E9 gets us a 3 byte identifier */ ++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || ++ ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) ++ return -EIO; ++ ++ hgpk_dbg(psmouse, "ID: %02x %02x %02x", param[0], param[1], param[2]); ++ ++ /* HGPK signature: 0x67, 0x00, 0x */ ++ if (param[0] != 0x67 || param[1] != 0x00) ++ return -ENODEV; ++ ++ hgpk_info(psmouse, "OLPC touchpad revision 0x%x\n", param[2]); ++ return param[2]; ++} ++ ++/* ++ * Touchpad should be disabled before calling this! ++ */ ++static int hgpk_new_mode(struct psmouse *psmouse, int mode) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ struct hgpk_data *priv = psmouse->private; ++ ++ /* ++ * PT mode: F2, F2, F2, E7 ++ * GS mode: F2, F2, F2, E6 ++ */ ++ if (ps2_command(ps2dev, NULL, 0xF2) || ++ ps2_command(ps2dev, NULL, 0xF2) || ++ ps2_command(ps2dev, NULL, 0xF2)) ++ return -EIO; ++ ++ if (mode == HGPK_GS) { ++ if (ps2_command(ps2dev, NULL, 0xE6)) ++ return -EIO; ++ } else { ++ if (ps2_command(ps2dev, NULL, 0xE7)) ++ return -EIO; ++ } ++ ++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) ++ return -EIO; ++ ++ /* tell the irq handler to stop ignoring packets */ ++ psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); ++ ++ priv->current_mode = mode; ++ priv->pending_mode = 0; ++ if (tpdebug) ++ hgpk_warn(psmouse, "Switched to mode 0x%x successful.\n", mode); ++ ++ return 0; ++} ++ ++static int hgpk_advanced_mode(struct psmouse *psmouse) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ ++ /* Switch to 'Advanced mode.', four disables in a row. */ ++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE)) ++ return -1; ++ ++ return hgpk_new_mode(psmouse, HGPK_GS); ++} ++ ++/* ++ * This kills power to the touchpad; according to ALPS, current consumption ++ * goes down to 50uA after running this. To turn power back on, we drive ++ * MS-DAT low. ++ */ ++static int hgpk_toggle_power(struct psmouse *psmouse, int enable) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ int timeo; ++ ++ /* Added on D-series touchpads */ ++ if (psmouse->model < HGPK_MODEL_D) ++ return 0; ++ ++ if (enable) { ++ psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); ++ ++ /* ++ * Sending a byte will drive MS-DAT low; this will wake up ++ * the controller. Once we get an ACK back from it, it ++ * means we can continue with the touchpad re-init. ALPS ++ * tells us that 1s should be long enough, so set that as ++ * the upper bound. ++ */ ++ for (timeo = 20; timeo > 0; timeo--) { ++ if (!ps2_sendbyte(&psmouse->ps2dev, ++ PSMOUSE_CMD_DISABLE, 20)) ++ break; ++ msleep(50); ++ } ++ ++ psmouse_reset(psmouse); ++ ++ if (hgpk_advanced_mode(psmouse)) { ++ hgpk_err(psmouse, "Failed to reinit touchpad!\n"); ++ return -1; ++ } ++ } else { ++ hgpk_dbg(psmouse, "Powering off touchpad.\n"); ++ psmouse_set_state(psmouse, PSMOUSE_IGNORE); ++ ++ if (ps2_command(ps2dev, NULL, 0xec) || ++ ps2_command(ps2dev, NULL, 0xec) || ++ ps2_command(ps2dev, NULL, 0xea)) ++ return -1; ++ /* probably won't see an ACK, the touchpad will be off */ ++ ps2_sendbyte(&psmouse->ps2dev, 0xec, 20); ++ } ++ ++ return 0; ++} ++ ++/* ++ * poll the touchpad for current motion packet. ++ * Used in resync. ++ * Note: We can't poll, so always return failure. ++ */ ++static int hgpk_poll(struct psmouse *psmouse) ++{ ++ return -1; ++} ++ ++static int hgpk_reconnect(struct psmouse *psmouse) ++{ ++ if (olpc_board_at_least(olpc_board(0xb2))) ++ if (psmouse->ps2dev.serio->dev.power.power_state.event != PM_EVENT_ON) ++ return 0; ++ ++ psmouse_reset(psmouse); ++ ++ if (hgpk_advanced_mode(psmouse)) { ++ hgpk_err(psmouse, "failed to reenable advanced mode.\n"); ++ return -1; ++ } ++ ++ return 0; ++} ++ ++static ssize_t hgpk_show_powered(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct serio *serio = to_serio_port(dev); ++ struct psmouse *psmouse; ++ struct hgpk_data *priv; ++ int retval; ++ ++ retval = serio_pin_driver(serio); ++ if (retval) ++ return retval; ++ ++ psmouse = serio_get_drvdata(serio); ++ priv = psmouse->private; ++ ++ retval = sprintf(buf, "%d\n", priv->powered); ++ serio_unpin_driver(serio); ++ return retval; ++} ++ ++static ssize_t hgpk_set_powered(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ struct serio *serio = to_serio_port(dev); ++ struct psmouse *psmouse; ++ struct hgpk_data *priv; ++ unsigned long val; ++ int retval; ++ ++ if (*buf == '1') ++ val = 1; ++ else if (*buf == '0') ++ val = 0; ++ else ++ return -EINVAL; ++ ++ retval = serio_pin_driver(serio); ++ if (retval) ++ return retval; ++ ++/* ++ * FUCK IT. I don't fucking care. locking in psmouse is fucking retarded! ++ retval = mutex_lock_interruptible(&psmouse_mutex); ++ if (retval) ++ goto out_unpin; ++*/ ++ ++ psmouse = serio_get_drvdata(serio); ++ priv = psmouse->private; ++ ++ if (val == priv->powered) ++ goto done; ++ ++ retval = hgpk_toggle_power(psmouse, val); ++ if (!retval) ++ priv->powered = val; ++ ++done: ++ serio_unpin_driver(serio); ++ return retval ? retval : count; ++} ++ ++static DEVICE_ATTR(powered, S_IWUSR | S_IRUGO, hgpk_show_powered, ++ hgpk_set_powered); ++ ++static void hgpk_disconnect(struct psmouse *psmouse) ++{ ++ struct hgpk_data *priv = psmouse->private; ++ ++ device_remove_file(&psmouse->ps2dev.serio->dev, &dev_attr_powered); ++ psmouse_reset(psmouse); ++ flush_scheduled_work(); ++ input_unregister_device(priv->gs); ++ kfree(priv); ++} ++ ++static void hgpk_mode_switch(struct work_struct *work) ++{ ++ struct delayed_work *w = container_of(work, struct delayed_work, work); ++ struct hgpk_data *priv = container_of(w, struct hgpk_data, switch_wq); ++ struct psmouse *psmouse = priv->psmouse; ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ int pending_mode; ++ ++ if (tpdebug) ++ hgpk_dbg(psmouse, "Starting mode switch to 0x%x. [%lu]\n", ++ priv->pending_mode, jiffies); ++ ++ if (priv->pending_mode == priv->current_mode) { ++ priv->pending_mode = 0; ++ hgpk_dbg(psmouse, "Already in target mode, no-op.\n"); ++ return; ++ } ++ ++ /* tell the irq handler to ignore any further packets */ ++ psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); ++ priv->late = 0; ++ ++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE)) ++ goto bad; ++ ++ /* ++ * ALPS tells us that it may take up to 20msec for the disable to ++ * take effect; however, ps2_command() will wait up to 200msec for ++ * the ACK to come back (and I'm assuming that by the time the ++ * hardware sends back its ACK, it has stopped sending bytes). ++ */ ++ pending_mode = priv->pending_mode; ++ ++ if (hgpk_new_mode(psmouse, priv->pending_mode)) ++ goto bad; ++ ++ /* ++ * Deal with a potential race condition. ++ * ++ * If there is a brief tap of a stylus or a fingernail that ++ * triggers a mode switch to PT mode, and the stylus/fingernail is ++ * lifted after the DISABLE above, but before we reenable in the ++ * new mode then we can get stuck in PT mode. ++ */ ++ if (pending_mode == HGPK_PT) { ++ priv->pending_mode = HGPK_GS; ++ queue_delayed_work(kpsmoused_wq, &priv->switch_wq, ++ msecs_to_jiffies(50)); ++ } ++ ++ return; ++bad: ++ hgpk_warn(psmouse, "Failure to switch modes, resetting device...\n"); ++ hgpk_reconnect(psmouse); ++} ++ ++static void hgpk_recalib_work(struct work_struct *work) ++{ ++ struct delayed_work *w = container_of(work, struct delayed_work, work); ++ struct hgpk_data *priv = container_of(w, struct hgpk_data, recalib_wq); ++ struct psmouse *psmouse = priv->psmouse; ++ ++ if (tpdebug) ++ hgpk_dbg(psmouse, "Recalibrating touchpad..\n"); ++ ++ if (hgpk_force_recalibrate(psmouse)) ++ hgpk_err(psmouse, "Recalibration failed!\n"); ++} ++ ++int olpc_init(struct psmouse *psmouse) ++{ ++ struct hgpk_data *priv; ++ struct input_dev *pt = psmouse->dev; ++ struct input_dev *gs; ++ ++ priv = kzalloc(sizeof(struct hgpk_data), GFP_KERNEL); ++ gs = input_allocate_device(); ++ if (!priv || !gs) ++ goto init_fail; ++ ++ psmouse->private = priv; ++ priv->gs = gs; ++ priv->psmouse = psmouse; ++ priv->powered = 1; ++ ++ psmouse_reset(psmouse); ++ ++ if (hgpk_advanced_mode(psmouse)) { ++ hgpk_err(psmouse, "failed to enable advanced mode\n"); ++ goto init_fail; ++ } ++ ++ /* Unset things that psmouse-base sets that we don't have */ ++ pt->evbit[0] &= ~BIT(EV_REL); ++ pt->keybit[LONG(BTN_MOUSE)] &= ~BIT(BTN_MIDDLE); ++ pt->relbit[0] &= ~(BIT(REL_X) | BIT(REL_Y)); ++ ++ /* Set all the things we *do* have */ ++ set_bit(EV_KEY, pt->evbit); ++ set_bit(EV_ABS, pt->evbit); ++ ++ set_bit(BTN_LEFT, pt->keybit); ++ set_bit(BTN_RIGHT, pt->keybit); ++ set_bit(BTN_TOUCH, pt->keybit); ++ ++ input_set_abs_params(pt, ABS_X, 2, 1000, 0, 0); ++ input_set_abs_params(pt, ABS_Y, 0, 717, 0, 0); ++ input_set_abs_params(pt, ABS_PRESSURE, 0, 127, 0, 0); ++ ++ snprintf(priv->phys, sizeof(priv->phys), ++ "%s/input1", psmouse->ps2dev.serio->phys); ++ gs->phys = priv->phys; ++ gs->name = "OLPC ALPS GlideSensor"; ++ gs->id.bustype = BUS_I8042; ++ gs->id.vendor = 0x0002; ++ gs->id.product = PSMOUSE_OLPC; ++ gs->id.version = psmouse->model; ++ ++ set_bit(EV_KEY, gs->evbit); ++ set_bit(EV_ABS, gs->evbit); ++ ++ set_bit(BTN_LEFT, gs->keybit); ++ set_bit(BTN_RIGHT, gs->keybit); ++ set_bit(BTN_TOUCH, gs->keybit); ++ ++ input_set_abs_params(gs, ABS_X, 350, 512, 0, 0); ++ input_set_abs_params(gs, ABS_Y, 70, 325, 0, 0); ++ input_set_abs_params(gs, ABS_PRESSURE, 0, 15, 0, 0); ++ ++ if (input_register_device(gs)) { ++ hgpk_err(psmouse, "Failed to register GlideSensor\n"); ++ goto init_fail; ++ } ++ ++ psmouse->protocol_handler = hgpk_process_byte; ++ psmouse->poll = hgpk_poll; ++ psmouse->disconnect = hgpk_disconnect; ++ psmouse->reconnect = hgpk_reconnect; ++ psmouse->pktsize = 6; ++ ++ /* Disable the idle resync. */ ++ psmouse->resync_time = 0; ++ /* Reset after a lot of bad bytes. */ ++ psmouse->resetafter = 1024; ++ ++ INIT_DELAYED_WORK(&priv->switch_wq, hgpk_mode_switch); ++ INIT_DELAYED_WORK(&priv->recalib_wq, hgpk_recalib_work); ++ ++ if (device_create_file(&psmouse->ps2dev.serio->dev, ++ &dev_attr_powered)) { ++ hgpk_err(psmouse, "Failed to create sysfs attribute\n"); ++ goto attr_fail; ++ } ++ ++ ++ return 0; ++ ++attr_fail: ++ input_unregister_device(gs); ++ gs = NULL; ++init_fail: ++ input_free_device(gs); ++ kfree(priv); ++ return -1; ++} ++ ++int olpc_detect(struct psmouse *psmouse, int set_properties) ++{ ++ int version; ++ ++ version = hgpk_get_model(psmouse); ++ if (version < 0) ++ return version; ++ ++ if (set_properties) { ++ psmouse->vendor = "ALPS"; ++ psmouse->name = "PenTablet"; ++ psmouse->model = version; ++ } ++ return 0; ++} +diff -purN linux_2.6.24_org/drivers/input/mouse/olpc.h linux_2.6.24_olpc/drivers/input/mouse/olpc.h +--- linux_2.6.24_org/drivers/input/mouse/olpc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/drivers/input/mouse/olpc.h 2008-02-15 18:59:14.000000000 +0000 +@@ -0,0 +1,78 @@ ++/* ++ * OLPC touchpad PS/2 mouse driver ++ * ++ * Copyright (c) 2006 One Laptop Per Child, inc. ++ * ++ * This driver is partly based on the ALPS driver. ++ * Copyright (c) 2003 Peter Osterlund ++ * Copyright (c) 2005 Vojtech Pavlik ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ */ ++ ++#ifndef _OLPC_H ++#define _OLPC_H ++ ++enum hgpk_model_t { ++ HGPK_MODEL_PreA = 0x0a, /* pre-B1s */ ++ HGPK_MODEL_A = 0x14, /* found on B1s, PT disabled in hardware */ ++ HGPK_MODEL_B = 0x28, /* B2s, has capacitance issues */ ++ HGPK_MODEL_C = 0x3c, ++ HGPK_MODEL_D = 0x50, /* C1, mass production */ ++}; ++ ++#define HGPK_GS 0xff /* The GlideSensor */ ++#define HGPK_PT 0xcf /* The PenTablet */ ++ ++struct hgpk_packet { ++ struct input_dev *dev; ++ int x, y, z; ++ unsigned char mode_switch; ++ unsigned int pt_down:1, gs_down:1; ++ unsigned int left:1, right:1; ++}; ++ ++struct hgpk_data { ++ struct input_dev *gs; /* GlideSensor */ ++ struct psmouse *psmouse; ++ char name[32]; /* Name */ ++ char phys[32]; /* Phys */ ++ int pending_mode; ++ int current_mode; ++ s64 late; ++ int axis_errors; ++ int repeat_pkts; ++ int powered; ++ unsigned long recalib_window; ++ struct delayed_work switch_wq; ++ struct delayed_work recalib_wq; ++}; ++ ++#define hgpk_dbg(psmouse, format, arg...) \ ++ dev_dbg(&(psmouse)->ps2dev.serio->dev, format, ## arg) ++#define hgpk_err(psmouse, format, arg...) \ ++ dev_err(&(psmouse)->ps2dev.serio->dev, format, ## arg) ++#define hgpk_info(psmouse, format, arg...) \ ++ dev_info(&(psmouse)->ps2dev.serio->dev, format, ## arg) ++#define hgpk_warn(psmouse, format, arg...) \ ++ dev_warn(&(psmouse)->ps2dev.serio->dev, format, ## arg) ++#define hgpk_notice(psmouse, format, arg...) \ ++ dev_notice(&(psmouse)->ps2dev.serio->dev, format, ## arg) ++ ++#ifdef CONFIG_MOUSE_PS2_OLPC ++int olpc_detect(struct psmouse *psmouse, int set_properties); ++int olpc_init(struct psmouse *psmouse); ++#else ++inline int olpc_detect(struct psmouse *psmouse, int set_properties) ++{ ++ return -ENOSYS; ++} ++inline int olpc_init(struct psmouse *psmouse) ++{ ++ return -ENOSYS; ++} ++#endif ++ ++#endif +diff -purN linux_2.6.24_org/drivers/input/mouse/psmouse-base.c linux_2.6.24_olpc/drivers/input/mouse/psmouse-base.c +--- linux_2.6.24_org/drivers/input/mouse/psmouse-base.c 2008-02-15 20:11:51.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/input/mouse/psmouse-base.c 2008-02-15 18:59:14.000000000 +0000 +@@ -26,6 +26,7 @@ + #include "synaptics.h" + #include "logips2pp.h" + #include "alps.h" ++#include "olpc.h" + #include "lifebook.h" + #include "trackpoint.h" + #include "touchkit_ps2.h" +@@ -103,7 +104,7 @@ static struct attribute_group psmouse_at + */ + static DEFINE_MUTEX(psmouse_mutex); + +-static struct workqueue_struct *kpsmoused_wq; ++struct workqueue_struct *kpsmoused_wq; + + struct psmouse_protocol { + enum psmouse_type type; +@@ -221,7 +222,7 @@ static inline void __psmouse_set_state(s + * is not a concern. + */ + +-static void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state) ++void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state) + { + serio_pause_rx(psmouse->ps2dev.serio); + __psmouse_set_state(psmouse, new_state); +@@ -320,7 +321,7 @@ static irqreturn_t psmouse_interrupt(str + goto out; + } + +- if (psmouse->packet[1] == PSMOUSE_RET_ID) { ++ if (psmouse->packet[1] == PSMOUSE_RET_ID || psmouse->packet[1] == PSMOUSE_RET_BAT) { + __psmouse_set_state(psmouse, PSMOUSE_IGNORE); + serio_reconnect(serio); + goto out; +@@ -631,8 +632,21 @@ static int psmouse_extensions(struct psm + } + } + ++/* ++ * Try OLPC touchpad. ++ */ + if (max_proto > PSMOUSE_IMEX) { ++ if (olpc_detect(psmouse, set_properties) == 0) { ++ if (!set_properties || olpc_init(psmouse) == 0) ++ return PSMOUSE_OLPC; ++/* ++ * Init failed, try basic relative protocols ++ */ ++ max_proto = PSMOUSE_IMEX; ++ } ++ } + ++ if (max_proto > PSMOUSE_IMEX) { + if (genius_detect(psmouse, set_properties) == 0) + return PSMOUSE_GENPS; + +@@ -763,6 +777,14 @@ static const struct psmouse_protocol psm + .detect = touchkit_ps2_detect, + }, + #endif ++#ifdef CONFIG_MOUSE_PS2_OLPC ++ { ++ .type = PSMOUSE_OLPC, ++ .name = "OLPC", ++ .alias = "olpc", ++ .detect = olpc_detect, ++ }, ++#endif + { + .type = PSMOUSE_CORTRON, + .name = "CortronPS/2", +diff -purN linux_2.6.24_org/drivers/input/mouse/psmouse.h linux_2.6.24_olpc/drivers/input/mouse/psmouse.h +--- linux_2.6.24_org/drivers/input/mouse/psmouse.h 2008-02-15 20:11:51.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/input/mouse/psmouse.h 2008-02-15 18:59:14.000000000 +0000 +@@ -88,6 +88,7 @@ enum psmouse_type { + PSMOUSE_LIFEBOOK, + PSMOUSE_TRACKPOINT, + PSMOUSE_TOUCHKIT_PS2, ++ PSMOUSE_OLPC, + PSMOUSE_CORTRON, + PSMOUSE_AUTO /* This one should always be last */ + }; +@@ -95,7 +96,9 @@ enum psmouse_type { + int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command); + int psmouse_reset(struct psmouse *psmouse); + void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution); ++void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state); + ++extern struct workqueue_struct *kpsmoused_wq; + + struct psmouse_attribute { + struct device_attribute dattr; +diff -purN linux_2.6.24_org/drivers/input/serio/i8042.c linux_2.6.24_olpc/drivers/input/serio/i8042.c +--- linux_2.6.24_org/drivers/input/serio/i8042.c 2008-02-15 20:11:51.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/input/serio/i8042.c 2008-02-15 18:59:14.000000000 +0000 +@@ -874,6 +874,11 @@ static long i8042_panic_blink(long count + #undef DELAY + + #ifdef CONFIG_PM ++ ++#ifdef CONFIG_OLPC ++#include ++#endif ++ + /* + * Here we try to restore the original BIOS settings. We only want to + * do that once, when we really suspend, not when we taking memory +@@ -884,8 +889,15 @@ static long i8042_panic_blink(long count + static int i8042_suspend(struct platform_device *dev, pm_message_t state) + { + if (dev->dev.power.power_state.event != state.event) { ++#ifdef CONFIG_OLPC ++ /* Anything newer than B2 remains powered; no reset needed */ ++ if (!olpc_board_at_least(olpc_board_pre(0xb3))) { ++#endif + if (state.event == PM_EVENT_SUSPEND) + i8042_controller_reset(); ++#ifdef CONFIG_OLPC ++ } ++#endif + + dev->dev.power.power_state = state; + } +@@ -908,9 +920,15 @@ static int i8042_resume(struct platform_ + if (dev->dev.power.power_state.event == PM_EVENT_ON) + return 0; + ++#ifdef CONFIG_OLPC ++ if (!olpc_board_at_least(olpc_board_pre(0xb3))) { ++#endif + error = i8042_controller_check(); + if (error) + return error; ++#ifdef CONFIG_OLPC ++ } ++#endif + + error = i8042_controller_selftest(); + if (error) +diff -purN linux_2.6.24_org/drivers/input/serio/serio.c linux_2.6.24_olpc/drivers/input/serio/serio.c +--- linux_2.6.24_org/drivers/input/serio/serio.c 2008-02-15 20:11:51.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/input/serio/serio.c 2008-02-15 18:59:14.000000000 +0000 +@@ -910,11 +910,22 @@ static int serio_uevent(struct device *d + #endif /* CONFIG_HOTPLUG */ + + #ifdef CONFIG_PM ++ ++#ifdef CONFIG_OLPC ++#include ++#endif ++ + static int serio_suspend(struct device *dev, pm_message_t state) + { + if (dev->power.power_state.event != state.event) { ++#ifdef CONFIG_OLPC ++ if (!olpc_board_at_least(olpc_board_pre(0xb3))) { ++#endif + if (state.event == PM_EVENT_SUSPEND) + serio_cleanup(to_serio_port(dev)); ++#ifdef CONFIG_OLPC ++ } ++#endif + + dev->power.power_state = state; + } +diff -purN linux_2.6.24_org/drivers/Kconfig linux_2.6.24_olpc/drivers/Kconfig +--- linux_2.6.24_org/drivers/Kconfig 2008-02-15 20:11:21.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/Kconfig 2008-02-15 18:58:34.000000000 +0000 +@@ -94,6 +94,8 @@ source "drivers/auxdisplay/Kconfig" + + source "drivers/kvm/Kconfig" + ++source "drivers/sysprof/Kconfig" ++ + source "drivers/uio/Kconfig" + + source "drivers/virtio/Kconfig" +diff -purN linux_2.6.24_org/drivers/Makefile linux_2.6.24_olpc/drivers/Makefile +--- linux_2.6.24_org/drivers/Makefile 2008-02-15 20:11:24.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/Makefile 2008-02-15 18:58:43.000000000 +0000 +@@ -23,6 +23,8 @@ obj-y += char/ + + obj-$(CONFIG_CONNECTOR) += connector/ + ++obj-$(CONFIG_SYSPROF) += sysprof/ ++ + # i810fb and intelfb depend on char/agp/ + obj-$(CONFIG_FB_I810) += video/i810/ + obj-$(CONFIG_FB_INTEL) += video/intelfb/ +diff -purN linux_2.6.24_org/drivers/media/video/cafe_ccic.c linux_2.6.24_olpc/drivers/media/video/cafe_ccic.c +--- linux_2.6.24_org/drivers/media/video/cafe_ccic.c 2008-02-15 20:11:25.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/media/video/cafe_ccic.c 2008-02-15 18:58:44.000000000 +0000 +@@ -372,6 +372,10 @@ static int cafe_smbus_write_data(struct + rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); + cafe_reg_write(cam, REG_TWSIC1, rval); + spin_unlock_irqrestore(&cam->dev_lock, flags); ++ mdelay(2); /* It'll probably take about 900µs anyway, and the ++ CAFÉ is apparently quite sensitive to being poked ++ at this point. If we can work out precisely what's ++ going on and reduce this delay, it would be nice. */ + + /* + * Time to wait for the write to complete. THIS IS A RACY +@@ -907,8 +911,6 @@ static int cafe_cam_configure(struct caf + struct v4l2_format fmt; + int ret, zero = 0; + +- if (cam->state != S_IDLE) +- return -EINVAL; + fmt.fmt.pix = cam->pix_format; + ret = __cafe_cam_cmd(cam, VIDIOC_INT_INIT, &zero); + if (ret == 0) +@@ -2237,14 +2239,18 @@ static int cafe_pci_suspend(struct pci_d + int ret; + enum cafe_state cstate; + ++ mutex_lock(&cam->s_mutex); + ret = pci_save_state(pdev); +- if (ret) ++ if (ret) { ++ cam_warn(cam, "Unable to save PCI state\n"); + return ret; ++ } + cstate = cam->state; /* HACK - stop_dma sets to idle */ + cafe_ctlr_stop_dma(cam); + cafe_ctlr_power_down(cam); + pci_disable_device(pdev); + cam->state = cstate; ++ /* hold mutex until restore */ + return 0; + } + +@@ -2263,16 +2269,18 @@ static int cafe_pci_resume(struct pci_de + cam_warn(cam, "Unable to re-enable device on resume!\n"); + return ret; + } ++ /* we're still holding mutex from suspend */ + cafe_ctlr_init(cam); + cafe_ctlr_power_down(cam); + +- mutex_lock(&cam->s_mutex); +- if (cam->users > 0) { +- cafe_ctlr_power_up(cam); +- __cafe_cam_reset(cam); +- } +- mutex_unlock(&cam->s_mutex); +- ++ if (cam->users > 0) { ++ cafe_ctlr_power_up(cam); ++ __cafe_cam_reset(cam); ++ } ++ else ++ cafe_ctlr_power_down(cam); ++ mutex_unlock(&cam->s_mutex); ++ + set_bit(CF_CONFIG_NEEDED, &cam->flags); + if (cam->state == S_SPECREAD) + cam->state = S_IDLE; /* Don't bother restarting */ +diff -purN linux_2.6.24_org/drivers/misc/Kconfig linux_2.6.24_olpc/drivers/misc/Kconfig +--- linux_2.6.24_org/drivers/misc/Kconfig 2008-02-15 20:11:42.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/misc/Kconfig 2008-02-15 18:58:52.000000000 +0000 +@@ -219,6 +219,11 @@ config THINKPAD_ACPI_BAY + + If you are not sure, say Y here. + ++config EEPROM_93CX6 ++ tristate "EEPROM 93CX6 support" ++ ---help--- ++ This is a driver for the EEPROM chipsets 93c46 and 93c66. ++ The driver supports both read as well as write commands. + + config ATMEL_SSC + tristate "Device driver for Atmel SSC peripheral" +diff -purN linux_2.6.24_org/drivers/mmc/card/block.c linux_2.6.24_olpc/drivers/mmc/card/block.c +--- linux_2.6.24_org/drivers/mmc/card/block.c 2008-02-15 20:11:13.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/mmc/card/block.c 2008-02-15 18:58:17.000000000 +0000 +@@ -237,6 +237,13 @@ static int mmc_blk_issue_rq(struct mmc_q + if (brq.data.blocks > card->host->max_blk_count) + brq.data.blocks = card->host->max_blk_count; + ++ if (mmc_card_sd(card) && !card->host->ios.clock) { ++ printk(KERN_ERR "%s: I/O to stopped card\n", ++ req->rq_disk->disk_name); ++ goto cmd_err; ++ } ++ mmc_set_data_timeout(&brq.data, card); ++ + /* + * If the host doesn't support multiple block writes, force + * block writes to single block. SD cards are excepted from +diff -purN linux_2.6.24_org/drivers/mmc/host/sdhci.c linux_2.6.24_olpc/drivers/mmc/host/sdhci.c +--- linux_2.6.24_org/drivers/mmc/host/sdhci.c 2008-02-15 20:11:13.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/mmc/host/sdhci.c 2008-02-15 18:58:17.000000000 +0000 +@@ -441,6 +441,12 @@ static void sdhci_prepare_data(struct sd + break; + } + ++ /* ++ * There's an off-by-one error in the hw that we need to ++ * compensate for. ++ */ ++ count++; ++ + if (count >= 0xF) { + printk(KERN_WARNING "%s: Too large timeout requested!\n", + mmc_hostname(host->mmc)); +@@ -728,19 +734,17 @@ static void sdhci_set_power(struct sdhci + if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) + writeb(0, host->ioaddr + SDHCI_POWER_CONTROL); + +- pwr = SDHCI_POWER_ON; +- + switch (1 << power) { + case MMC_VDD_165_195: +- pwr |= SDHCI_POWER_180; ++ pwr = SDHCI_POWER_180; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: +- pwr |= SDHCI_POWER_300; ++ pwr = SDHCI_POWER_300; + break; + case MMC_VDD_32_33: + case MMC_VDD_33_34: +- pwr |= SDHCI_POWER_330; ++ pwr = SDHCI_POWER_330; + break; + default: + BUG(); +@@ -748,6 +752,10 @@ static void sdhci_set_power(struct sdhci + + writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL); + ++ pwr |= SDHCI_POWER_ON; ++ ++ writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL); ++ + out: + host->power = power; + } +diff -purN linux_2.6.24_org/drivers/mtd/nand/cafe_nand.c linux_2.6.24_olpc/drivers/mtd/nand/cafe_nand.c +--- linux_2.6.24_org/drivers/mtd/nand/cafe_nand.c 2008-02-15 20:11:46.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/mtd/nand/cafe_nand.c 2008-02-15 18:58:57.000000000 +0000 +@@ -11,6 +11,7 @@ + #undef DEBUG + #include + #include ++#include + #include + #include + #include +@@ -52,6 +53,7 @@ + + struct cafe_priv { + struct nand_chip nand; ++ struct mtd_partition *parts; + struct pci_dev *pdev; + void __iomem *mmio; + struct rs_control *rs; +@@ -84,6 +86,10 @@ static unsigned int numtimings; + static int timing[3]; + module_param_array(timing, int, &numtimings, 0644); + ++#ifdef CONFIG_MTD_PARTITIONS ++static const char *part_probes[] = { "RedBoot", NULL }; ++#endif ++ + /* Hrm. Why isn't this already conditional on something in the struct device? */ + #define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0) + +@@ -620,7 +626,9 @@ static int __devinit cafe_nand_probe(str + { + struct mtd_info *mtd; + struct cafe_priv *cafe; ++ struct mtd_partition *parts; + uint32_t ctrl; ++ int nr_parts; + int err = 0; + + /* Very old versions shared the same PCI ident for all three +@@ -787,7 +795,18 @@ static int __devinit cafe_nand_probe(str + goto out_irq; + + pci_set_drvdata(pdev, mtd); ++ ++ /* We register the whole device first, separate from the partitions */ + add_mtd_device(mtd); ++ ++#ifdef CONFIG_MTD_PARTITIONS ++ nr_parts = parse_mtd_partitions(mtd, part_probes, &parts, 0); ++ if (nr_parts > 0) { ++ cafe->parts = parts; ++ dev_info(&cafe->pdev->dev, "%d RedBoot partitions found\n", nr_parts); ++ add_mtd_partitions(mtd, parts, nr_parts); ++ } ++#endif + goto out; + + out_irq: +diff -purN linux_2.6.24_org/drivers/mtd/redboot.c linux_2.6.24_olpc/drivers/mtd/redboot.c +--- linux_2.6.24_org/drivers/mtd/redboot.c 2008-02-15 20:11:46.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/mtd/redboot.c 2008-02-15 18:58:58.000000000 +0000 +@@ -59,16 +59,31 @@ static int parse_redboot_partitions(stru + static char nullstring[] = "unallocated"; + #endif + ++ if ( directory < 0 ) { ++ offset = master->size + directory * master->erasesize; ++ while (master->block_isbad && ++ master->block_isbad(master, offset)) { ++ if (!offset) { ++ nogood: ++ printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); ++ return -EIO; ++ } ++ offset -= master->erasesize; ++ } ++ } else { ++ offset = directory * master->erasesize; ++ while (master->block_isbad && ++ master->block_isbad(master, offset)) { ++ offset += master->erasesize; ++ if (offset == master->size) ++ goto nogood; ++ } ++ } + buf = vmalloc(master->erasesize); + + if (!buf) + return -ENOMEM; + +- if ( directory < 0 ) +- offset = master->size + directory*master->erasesize; +- else +- offset = directory*master->erasesize; +- + printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", + master->name, offset); + +diff -purN linux_2.6.24_org/drivers/net/forcedeth.c linux_2.6.24_olpc/drivers/net/forcedeth.c +--- linux_2.6.24_org/drivers/net/forcedeth.c 2008-02-15 20:11:19.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/net/forcedeth.c 2008-02-15 18:58:33.000000000 +0000 +@@ -3559,11 +3559,13 @@ static int nv_request_irq(struct net_dev + } + if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) { + if ((ret = pci_enable_msi(np->pci_dev)) == 0) { ++ pci_intx(np->pci_dev, 0); + np->msi_flags |= NV_MSI_ENABLED; + dev->irq = np->pci_dev->irq; + if (request_irq(np->pci_dev->irq, handler, IRQF_SHARED, dev->name, dev) != 0) { + printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret); + pci_disable_msi(np->pci_dev); ++ pci_intx(np->pci_dev, 1); + np->msi_flags &= ~NV_MSI_ENABLED; + dev->irq = np->pci_dev->irq; + goto out_err; +@@ -3606,6 +3608,7 @@ static void nv_free_irq(struct net_devic + free_irq(np->pci_dev->irq, dev); + if (np->msi_flags & NV_MSI_ENABLED) { + pci_disable_msi(np->pci_dev); ++ pci_intx(np->pci_dev, 1); + np->msi_flags &= ~NV_MSI_ENABLED; + } + } +diff -purN linux_2.6.24_org/drivers/pci/quirks.c linux_2.6.24_olpc/drivers/pci/quirks.c +--- linux_2.6.24_org/drivers/pci/quirks.c 2008-02-15 20:11:33.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/pci/quirks.c 2008-02-15 18:58:50.000000000 +0000 +@@ -1359,6 +1359,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN + DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); + + /* ++ * According to Tom Sylla, the Geode does not support PCI power management ++ * transition, so we shouldn't need the D3hot delay. ++ */ ++static void __init quirk_geode_pci_pm(struct pci_dev *dev) ++{ ++ pci_pm_d3_delay = 0; ++} ++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, quirk_geode_pci_pm); ++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_geode_pci_pm); ++ ++/* + * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size + * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. + * Re-allocate the region if needed... +diff -purN linux_2.6.24_org/drivers/power/ds2760_battery.c linux_2.6.24_olpc/drivers/power/ds2760_battery.c +--- linux_2.6.24_org/drivers/power/ds2760_battery.c 2008-02-15 20:11:45.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/power/ds2760_battery.c 2008-02-15 18:58:56.000000000 +0000 +@@ -409,6 +409,7 @@ static int ds2760_battery_suspend(struct + struct ds2760_device_info *di = platform_get_drvdata(pdev); + + di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN; ++ power_supply_changed(&di->bat); + + return 0; + } +diff -purN linux_2.6.24_org/drivers/power/olpc_battery.c linux_2.6.24_olpc/drivers/power/olpc_battery.c +--- linux_2.6.24_org/drivers/power/olpc_battery.c 2008-02-15 20:11:45.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/power/olpc_battery.c 2008-02-15 18:58:56.000000000 +0000 +@@ -14,12 +14,13 @@ + #include + #include + #include ++#include + #include + + + #define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */ + #define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */ +-#define EC_BAT_ACR 0x12 ++#define EC_BAT_ACR 0x12 /* int16_t *416.667 µAh */ + #define EC_BAT_TEMP 0x13 /* uint16_t, *100/256, °C */ + #define EC_AMB_TEMP 0x14 /* uint16_t, *100/256, °C */ + #define EC_BAT_STATUS 0x15 /* uint8_t, bitmask */ +@@ -84,6 +85,8 @@ static struct power_supply olpc_ac = { + .get_property = olpc_ac_get_prop, + }; + ++static char bat_serial[17]; /* Ick */ ++ + /********************************************************************* + * Battery properties + *********************************************************************/ +@@ -94,6 +97,7 @@ static int olpc_bat_get_property(struct + int ret = 0; + int16_t ec_word; + uint8_t ec_byte; ++ uint64_t ser_buf; + + ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1); + if (ret) +@@ -127,8 +131,8 @@ static int olpc_bat_get_property(struct + val->intval = POWER_SUPPLY_STATUS_FULL; + else /* Not _necessarily_ true but EC doesn't tell all yet */ + val->intval = POWER_SUPPLY_STATUS_CHARGING; +- break; + } ++ break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = !!(ec_byte & BAT_STAT_PRESENT); + break; +@@ -249,6 +253,22 @@ static int olpc_bat_get_property(struct + ec_word = be16_to_cpu(ec_word); + val->intval = ec_word * 100 / 256; + break; ++ case POWER_SUPPLY_PROP_ACCUM_CURRENT: ++ ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2); ++ if (ret) ++ return ret; ++ ++ ec_word = be16_to_cpu(ec_word); ++ val->intval = (uint16_t)ec_word; ++ break; ++ case POWER_SUPPLY_PROP_SERIAL_NUMBER: ++ ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8); ++ if (ret) ++ return ret; ++ ++ sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf)); ++ val->strval = bat_serial; ++ break; + default: + ret = -EINVAL; + break; +@@ -268,7 +288,51 @@ static enum power_supply_property olpc_b + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TEMP_AMBIENT, ++ POWER_SUPPLY_PROP_ACCUM_CURRENT, + POWER_SUPPLY_PROP_MANUFACTURER, ++ POWER_SUPPLY_PROP_SERIAL_NUMBER, ++}; ++ ++/* EEPROM reading goes completely around the power_supply API, sadly */ ++ ++#define EEPROM_START 0x20 ++#define EEPROM_END 0x80 ++#define EEPROM_SIZE (EEPROM_END - EEPROM_START) ++ ++static ssize_t olpc_bat_eeprom_read(struct kobject *kobj, char *buf, loff_t off, ++ size_t count) ++{ ++ uint8_t ec_byte; ++ int ret, end; ++ ++ if (off >= EEPROM_SIZE) ++ return 0; ++ if (off + count > EEPROM_SIZE) ++ count = EEPROM_SIZE - off; ++ ++ end = EEPROM_START + off + count; ++ for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) { ++ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, ++ &buf[ec_byte - EEPROM_START], 1); ++ if (ret) { ++ printk(KERN_ERR "olpc-battery: EC command " ++ "EC_BAT_EEPROM @ 0x%x failed -" ++ " %d!\n", ec_byte, ret); ++ return -EIO; ++ } ++ } ++ ++ return count; ++} ++ ++static struct bin_attribute olpc_bat_eeprom = { ++ .attr = { ++ .name = "eeprom", ++ .mode = S_IRUGO, ++ .owner = THIS_MODULE, ++ }, ++ .size = 0, ++ .read = olpc_bat_eeprom_read, + }; + + /********************************************************************* +@@ -299,7 +363,7 @@ static int __init olpc_bat_init(void) + + if (!olpc_platform_info.ecver) + return -ENXIO; +- if (olpc_platform_info.ecver < 0x43) { ++ if (olpc_platform_info.ecver < 0x44) { + printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver); + return -ENXIO; + } +@@ -324,9 +388,15 @@ static int __init olpc_bat_init(void) + if (ret) + goto battery_failed; + ++ ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom); ++ if (ret) ++ goto eeprom_failed; ++ + olpc_register_battery_callback(&olpc_battery_trigger_uevent); + goto success; + ++eeprom_failed: ++ power_supply_unregister(&olpc_bat); + battery_failed: + power_supply_unregister(&olpc_ac); + ac_failed: +@@ -338,6 +408,7 @@ success: + static void __exit olpc_bat_exit(void) + { + olpc_deregister_battery_callback(); ++ device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom); + power_supply_unregister(&olpc_bat); + power_supply_unregister(&olpc_ac); + platform_device_unregister(bat_pdev); +diff -purN linux_2.6.24_org/drivers/power/power_supply_sysfs.c linux_2.6.24_olpc/drivers/power/power_supply_sysfs.c +--- linux_2.6.24_org/drivers/power/power_supply_sysfs.c 2008-02-15 20:11:45.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/power/power_supply_sysfs.c 2008-02-15 18:58:56.000000000 +0000 +@@ -114,9 +114,11 @@ static struct device_attribute power_sup + POWER_SUPPLY_ATTR(time_to_empty_avg), + POWER_SUPPLY_ATTR(time_to_full_now), + POWER_SUPPLY_ATTR(time_to_full_avg), ++ POWER_SUPPLY_ATTR(accum_current), + /* Properties of type `const char *' */ + POWER_SUPPLY_ATTR(model_name), + POWER_SUPPLY_ATTR(manufacturer), ++ POWER_SUPPLY_ATTR(serial_number), + }; + + static ssize_t power_supply_show_static_attrs(struct device *dev, +diff -purN linux_2.6.24_org/drivers/serial/serial_core.c linux_2.6.24_olpc/drivers/serial/serial_core.c +--- linux_2.6.24_org/drivers/serial/serial_core.c 2008-02-15 20:11:33.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/serial/serial_core.c 2008-02-15 18:58:51.000000000 +0000 +@@ -2013,6 +2013,7 @@ int uart_suspend_port(struct uart_driver + int uart_resume_port(struct uart_driver *drv, struct uart_port *port) + { + struct uart_state *state = drv->state + port->line; ++ struct ktermios termios; + + mutex_lock(&state->mutex); + +@@ -2035,20 +2036,6 @@ int uart_resume_port(struct uart_driver + * Re-enable the console device after suspending. + */ + if (uart_console(port)) { +- struct ktermios termios; +- +- /* +- * First try to use the console cflag setting. +- */ +- memset(&termios, 0, sizeof(struct ktermios)); +- termios.c_cflag = port->cons->cflag; +- +- /* +- * If that's unset, use the tty termios setting. +- */ +- if (state->info && state->info->tty && termios.c_cflag == 0) +- termios = *state->info->tty->termios; +- + port->ops->set_termios(port, &termios, NULL); + console_start(port->cons); + } +diff -purN linux_2.6.24_org/drivers/sysprof/config.h linux_2.6.24_olpc/drivers/sysprof/config.h +--- linux_2.6.24_org/drivers/sysprof/config.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/drivers/sysprof/config.h 2008-02-15 18:58:59.000000000 +0000 +@@ -0,0 +1,23 @@ ++/* config.h. Generated by configure. */ ++/* config.h.in. Generated from configure.ac by autoheader. */ ++ ++/* Look for global separate debug info in this path */ ++#define DEBUGDIR "/usr/local/lib/debug" ++ ++/* Define to 1 if you have the `iberty' library (-liberty). */ ++/* #undef HAVE_LIBIBERTY */ ++ ++/* Define to the address where bug reports for this package should be sent. */ ++#define PACKAGE_BUGREPORT "" ++ ++/* Define to the full name of this package. */ ++#define PACKAGE_NAME "sysprof" ++ ++/* Define to the full name and version of this package. */ ++#define PACKAGE_STRING "sysprof 1.0.8" ++ ++/* Define to the one symbol short name of this package. */ ++#define PACKAGE_TARNAME "sysprof" ++ ++/* Define to the version of this package. */ ++#define PACKAGE_VERSION "1.0.8" +diff -purN linux_2.6.24_org/drivers/sysprof/Kconfig linux_2.6.24_olpc/drivers/sysprof/Kconfig +--- linux_2.6.24_org/drivers/sysprof/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/drivers/sysprof/Kconfig 2008-02-15 18:58:59.000000000 +0000 +@@ -0,0 +1,12 @@ ++ ++menu "Sysprof" ++ ++config SYSPROF ++ tristate "Sysprof support" ++ help ++ Say M here to include the sysprof-module. ++ ++ Sysprof is a sampling profiler that uses a kernel module, ++ sysprof-module, to generate stacktraces which are then interpreted by ++ the userspace program "sysprof". ++endmenu +diff -purN linux_2.6.24_org/drivers/sysprof/Makefile linux_2.6.24_olpc/drivers/sysprof/Makefile +--- linux_2.6.24_org/drivers/sysprof/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/drivers/sysprof/Makefile 2008-02-15 18:58:59.000000000 +0000 +@@ -0,0 +1 @@ ++obj-$(CONFIG_SYSPROF) += sysprof-module.o +diff -purN linux_2.6.24_org/drivers/sysprof/sysprof-module.c linux_2.6.24_olpc/drivers/sysprof/sysprof-module.c +--- linux_2.6.24_org/drivers/sysprof/sysprof-module.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/drivers/sysprof/sysprof-module.c 2008-02-15 18:58:59.000000000 +0000 +@@ -0,0 +1,271 @@ ++/* -*- c-basic-offset: 8 -*- */ ++ ++/* Sysprof -- Sampling, systemwide CPU profiler ++ * Copyright 2004, Red Hat, Inc. ++ * Copyright 2004, 2005, Soeren Sandmann ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#ifdef CONFIG_SMP ++# define __SMP__ ++#endif ++#include ++#include /* Needed for KERN_ALERT */ ++#include /* Needed by all modules */ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "sysprof-module.h" ++ ++#include "config.h" ++ ++#include ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ++#include ++#endif ++ ++#if !CONFIG_PROFILING ++# error Sysprof needs a kernel with profiling support compiled in. ++#endif ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) ++# error Sysprof needs a Linux 2.6.11 kernel or later ++#endif ++#include ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Soeren Sandmann (sandmann@daimi.au.dk)"); ++ ++#define SAMPLES_PER_SECOND (200) ++#define INTERVAL ((HZ <= SAMPLES_PER_SECOND)? 1 : (HZ / SAMPLES_PER_SECOND)) ++#define N_TRACES 256 ++ ++static SysprofStackTrace stack_traces[N_TRACES]; ++static SysprofStackTrace * head = &stack_traces[0]; ++static SysprofStackTrace * tail = &stack_traces[0]; ++DECLARE_WAIT_QUEUE_HEAD (wait_for_trace); ++DECLARE_WAIT_QUEUE_HEAD (wait_for_exit); ++ ++/* Macro the names of the registers that are used on each architecture */ ++#if defined(CONFIG_X86_64) ++# define REG_FRAME_PTR rbp ++# define REG_INS_PTR rip ++# define REG_STACK_PTR rsp ++#elif defined(CONFIG_X86) ++# define REG_FRAME_PTR ebp ++# define REG_INS_PTR eip ++# define REG_STACK_PTR esp ++#else ++# error Sysprof only supports the i386 and x86-64 architectures ++#endif ++ ++typedef struct userspace_reader userspace_reader; ++struct userspace_reader ++{ ++ struct task_struct *task; ++ unsigned long cache_address; ++ unsigned long *cache; ++}; ++ ++typedef struct StackFrame StackFrame; ++struct StackFrame { ++ unsigned long next; ++ unsigned long return_address; ++}; ++ ++struct work_struct work; ++ ++static int ++read_frame (void *frame_pointer, StackFrame *frame) ++{ ++#if 0 ++ /* This is commented out because we seem to be called with ++ * (current_thread_info()->addr_limit.seg)) == 0 ++ * which means access_ok() _always_ fails. ++ * ++ * Not sure why (or if) this isn't the case for oprofile ++ */ ++ if (!access_ok(VERIFY_READ, frame_pointer, sizeof(StackFrame))) ++ return 1; ++#endif ++ ++ if (__copy_from_user_inatomic ( ++ frame, frame_pointer, sizeof (StackFrame))) ++ return 1; ++ ++ return 0; ++} ++ ++DEFINE_PER_CPU(int, n_samples); ++ ++static int ++timer_notify (struct pt_regs *regs) ++{ ++ SysprofStackTrace *trace = head; ++ int i; ++ int is_user; ++ static atomic_t in_timer_notify = ATOMIC_INIT(1); ++ int n; ++ ++ n = ++get_cpu_var(n_samples); ++ put_cpu_var(n_samples); ++ ++ if (n % INTERVAL != 0) ++ return 0; ++ ++ /* 0: locked, 1: unlocked */ ++ ++ if (!atomic_dec_and_test(&in_timer_notify)) ++ goto out; ++ ++ is_user = user_mode(regs); ++ ++ if (!current || current->pid == 0) ++ goto out; ++ ++ if (is_user && current->state != TASK_RUNNING) ++ goto out; ++ ++ if (!is_user) ++ { ++ /* kernel */ ++ ++ trace->pid = current->pid; ++ trace->truncated = 0; ++ trace->n_addresses = 1; ++ ++ /* 0x1 is taken by sysprof to mean "in kernel" */ ++ trace->addresses[0] = (void *)0x1; ++ } ++ else ++ { ++ StackFrame *frame_pointer; ++ StackFrame frame; ++ memset(trace, 0, sizeof (SysprofStackTrace)); ++ ++ trace->pid = current->pid; ++ trace->truncated = 0; ++ ++ i = 0; ++ ++ trace->addresses[i++] = (void *)regs->REG_INS_PTR; ++ ++ frame_pointer = (void *)regs->REG_FRAME_PTR; ++ ++ while (read_frame (frame_pointer, &frame) == 0 && ++ i < SYSPROF_MAX_ADDRESSES && ++ (unsigned long)frame_pointer >= regs->REG_STACK_PTR) ++ { ++ trace->addresses[i++] = (void *)frame.return_address; ++ frame_pointer = (StackFrame *)frame.next; ++ } ++ ++ trace->n_addresses = i; ++ ++ if (i == SYSPROF_MAX_ADDRESSES) ++ trace->truncated = 1; ++ else ++ trace->truncated = 0; ++ } ++ ++ if (head++ == &stack_traces[N_TRACES - 1]) ++ head = &stack_traces[0]; ++ ++ wake_up (&wait_for_trace); ++ ++out: ++ atomic_inc(&in_timer_notify); ++ return 0; ++} ++ ++static int ++procfile_read(char *buffer, ++ char **buffer_location, ++ off_t offset, ++ int buffer_len, ++ int *eof, ++ void *data) ++{ ++ if (head == tail) ++ return -EWOULDBLOCK; ++ ++ *buffer_location = (char *)tail; ++ ++ BUG_ON(tail->pid == 0); ++ ++ if (tail++ == &stack_traces[N_TRACES - 1]) ++ tail = &stack_traces[0]; ++ ++ return sizeof (SysprofStackTrace); ++} ++ ++struct proc_dir_entry *trace_proc_file; ++static unsigned int ++procfile_poll(struct file *filp, poll_table *poll_table) ++{ ++ if (head != tail) ++ return POLLIN | POLLRDNORM; ++ ++ poll_wait(filp, &wait_for_trace, poll_table); ++ ++ if (head != tail) ++ return POLLIN | POLLRDNORM; ++ ++ return 0; ++} ++ ++int ++init_module(void) ++{ ++ static struct file_operations fops; ++ ++ trace_proc_file = ++ create_proc_entry ("sysprof-trace", S_IFREG | S_IRUGO, &proc_root); ++ ++ if (!trace_proc_file) ++ return 1; ++ ++ fops = *trace_proc_file->proc_fops; ++ fops.poll = procfile_poll; ++ ++ trace_proc_file->read_proc = procfile_read; ++ trace_proc_file->proc_fops = &fops; ++ trace_proc_file->size = sizeof (SysprofStackTrace); ++ ++ register_timer_hook (timer_notify); ++ ++ printk(KERN_ALERT "sysprof: loaded (%s)\n", PACKAGE_VERSION); ++ ++ return 0; ++} ++ ++void ++cleanup_module(void) ++{ ++ unregister_timer_hook (timer_notify); ++ ++ remove_proc_entry("sysprof-trace", &proc_root); ++ ++ printk(KERN_ALERT "sysprof: unloaded\n"); ++} ++ +diff -purN linux_2.6.24_org/drivers/sysprof/sysprof-module.h linux_2.6.24_olpc/drivers/sysprof/sysprof-module.h +--- linux_2.6.24_org/drivers/sysprof/sysprof-module.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/drivers/sysprof/sysprof-module.h 2008-02-15 18:58:59.000000000 +0000 +@@ -0,0 +1,37 @@ ++/* Sysprof -- Sampling, systemwide CPU profiler ++ * Copyright 2004, Red Hat, Inc. ++ * Copyright 2004, 2005, Soeren Sandmann ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#ifndef SYSPROF_MODULE_H ++#define SYSPROF_MODULE_H ++ ++typedef struct SysprofStackTrace SysprofStackTrace; ++ ++#define SYSPROF_MAX_ADDRESSES 512 ++ ++struct SysprofStackTrace ++{ ++ int pid; /* -1 if in kernel */ ++ int truncated; ++ int n_addresses; /* note: this can be 1 if the process was compiled ++ * with -fomit-frame-pointer or is otherwise weird ++ */ ++ void *addresses[SYSPROF_MAX_ADDRESSES]; ++}; ++ ++#endif +diff -purN linux_2.6.24_org/drivers/usb/core/driver.c linux_2.6.24_olpc/drivers/usb/core/driver.c +--- linux_2.6.24_org/drivers/usb/core/driver.c 2008-02-15 20:11:09.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/usb/core/driver.c 2008-02-15 18:58:14.000000000 +0000 +@@ -1062,8 +1062,15 @@ static int usb_suspend_both(struct usb_d + break; + } + } +- if (status == 0) ++ if (status == 0) { ++ ++ /* Non-root devices don't need to do anything for FREEZE ++ * or PRETHAW. */ ++ if (udev->parent && (msg.event == PM_EVENT_FREEZE || ++ msg.event == PM_EVENT_PRETHAW)) ++ goto done; + status = usb_suspend_device(udev, msg); ++ } + + /* If the suspend failed, resume interfaces that did get suspended */ + if (status != 0) { +diff -purN linux_2.6.24_org/drivers/usb/core/quirks.c linux_2.6.24_olpc/drivers/usb/core/quirks.c +--- linux_2.6.24_org/drivers/usb/core/quirks.c 2008-02-15 20:11:09.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/usb/core/quirks.c 2008-02-15 18:58:12.000000000 +0000 +@@ -45,6 +45,9 @@ static const struct usb_device_id usb_qu + /* SKYMEDI USB_DRIVE */ + { USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME }, + ++ /* Philips PSC805 audio device */ ++ { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME }, ++ + { } /* terminating entry must be last */ + }; + +diff -purN linux_2.6.24_org/drivers/usb/core/usb.h linux_2.6.24_olpc/drivers/usb/core/usb.h +--- linux_2.6.24_org/drivers/usb/core/usb.h 2008-02-15 20:11:09.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/usb/core/usb.h 2008-02-15 18:58:14.000000000 +0000 +@@ -41,6 +41,7 @@ extern void usb_host_cleanup(void); + extern void usb_autosuspend_work(struct work_struct *work); + extern int usb_port_suspend(struct usb_device *dev); + extern int usb_port_resume(struct usb_device *dev); ++extern int usb_reset_suspended_device(struct usb_device *udev); + extern int usb_external_suspend_device(struct usb_device *udev, + pm_message_t msg); + extern int usb_external_resume_device(struct usb_device *udev); +diff -purN linux_2.6.24_org/drivers/usb/host/ehci-hcd.c linux_2.6.24_olpc/drivers/usb/host/ehci-hcd.c +--- linux_2.6.24_org/drivers/usb/host/ehci-hcd.c 2008-02-15 20:11:09.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/usb/host/ehci-hcd.c 2008-02-15 18:58:12.000000000 +0000 +@@ -653,9 +653,16 @@ static irqreturn_t ehci_irq (struct usb_ + + /* complete the unlinking of some qh [4.15.2.3] */ + if (status & STS_IAA) { +- COUNT (ehci->stats.reclaim); +- ehci->reclaim_ready = 1; +- bh = 1; ++ if (!ehci->reclaim) { ++ printk(KERN_WARNING "%s would set reclaim_ready with nothing to reclaim!\n", __func__); ++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command)); ++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status)); ++ WARN_ON(1); ++ } else { ++ COUNT (ehci->stats.reclaim); ++ ehci->reclaim_ready = 1; ++ bh = 1; ++ } + } + + /* remote wakeup [4.3.1] */ +diff -purN linux_2.6.24_org/drivers/usb/host/ehci-hub.c linux_2.6.24_olpc/drivers/usb/host/ehci-hub.c +--- linux_2.6.24_org/drivers/usb/host/ehci-hub.c 2008-02-15 20:11:09.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/usb/host/ehci-hub.c 2008-02-15 18:58:12.000000000 +0000 +@@ -132,10 +132,15 @@ static int ehci_bus_suspend (struct usb_ + ehci_quiesce (ehci); + hcd->state = HC_STATE_QUIESCING; + } ++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command)); ++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status)); ++ + ehci->command = ehci_readl(ehci, &ehci->regs->command); + if (ehci->reclaim) + ehci->reclaim_ready = 1; + ehci_work(ehci); ++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command)); ++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status)); + + /* Unlike other USB host controller types, EHCI doesn't have + * any notion of "global" or bus-wide suspend. The driver has +@@ -175,6 +180,9 @@ static int ehci_bus_suspend (struct usb_ + ehci_halt (ehci); + hcd->state = HC_STATE_SUSPENDED; + ++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command)); ++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status)); ++ + /* allow remote wakeup */ + mask = INTR_MASK; + if (!device_may_wakeup(&hcd->self.root_hub->dev)) +@@ -195,6 +203,18 @@ static int ehci_bus_resume (struct usb_h + u32 temp; + u32 power_okay; + int i; ++#ifdef CONFIG_OLPC ++ u32 lo; ++ static void __iomem *usb_ehc_addr; ++ ++ rdmsrl(0x51200009, lo); ++ usb_ehc_addr = ioremap(lo, 256); ++ writel(readl(usb_ehc_addr+0x54) | 0x1000, usb_ehc_addr+0x54); ++ writel(readl(usb_ehc_addr+0x58) | 0x1000, usb_ehc_addr+0x58); ++ writel(readl(usb_ehc_addr+0x5C) | 0x1000, usb_ehc_addr+0x5C); ++ writel(readl(usb_ehc_addr+0x60) | 0x1000, usb_ehc_addr+0x60); ++ iounmap(usb_ehc_addr); ++#endif + + if (time_before (jiffies, ehci->next_statechange)) + msleep(5); +diff -purN linux_2.6.24_org/drivers/usb/host/ehci-pci.c linux_2.6.24_olpc/drivers/usb/host/ehci-pci.c +--- linux_2.6.24_org/drivers/usb/host/ehci-pci.c 2008-02-15 20:11:09.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/usb/host/ehci-pci.c 2008-02-15 18:58:12.000000000 +0000 +@@ -247,6 +247,9 @@ static int ehci_pci_suspend(struct usb_h + rc = -EINVAL; + goto bail; + } ++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command)); ++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status)); ++ + ehci_writel(ehci, 0, &ehci->regs->intr_enable); + (void)ehci_readl(ehci, &ehci->regs->intr_enable); + +diff -purN linux_2.6.24_org/drivers/usb/host/ehci-q.c linux_2.6.24_olpc/drivers/usb/host/ehci-q.c +--- linux_2.6.24_org/drivers/usb/host/ehci-q.c 2008-02-15 20:11:09.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/usb/host/ehci-q.c 2008-02-15 18:58:12.000000000 +0000 +@@ -177,7 +177,7 @@ static int qtd_copy_status ( + if (QTD_CERR (token)) + status = -EPIPE; + else { +- ehci_dbg (ehci, "devpath %s ep%d%s 3strikes\n", ++ printk(KERN_ERR "devpath %s ep%d%s 3strikes\n", + urb->dev->devpath, + usb_pipeendpoint (urb->pipe), + usb_pipein (urb->pipe) ? "in" : "out"); +@@ -973,6 +973,11 @@ static void end_unlink_async (struct ehc + struct ehci_qh *qh = ehci->reclaim; + struct ehci_qh *next; + ++ if (!qh) { ++ printk(KERN_CRIT "%s with ehci->reclaim == NULL!\n", __func__); ++ WARN_ON(1); ++ return; ++ } + timer_action_done (ehci, TIMER_IAA_WATCHDOG); + + // qh->hw_next = cpu_to_hc32(qh->qh_dma); +diff -purN linux_2.6.24_org/drivers/usb/host/ohci-pci.c linux_2.6.24_olpc/drivers/usb/host/ohci-pci.c +--- linux_2.6.24_org/drivers/usb/host/ohci-pci.c 2008-02-15 20:11:09.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/usb/host/ohci-pci.c 2008-02-15 18:58:12.000000000 +0000 +@@ -317,6 +317,8 @@ static int ohci_pci_resume (struct usb_h + /* FIXME: we should try to detect loss of VBUS power here */ + prepare_for_handover(hcd); + ++ /* Force the PM core to resume the root hub */ ++ hcd_to_bus(hcd)->root_hub->dev.power.prev_state.event = PM_EVENT_ON; + return 0; + } + +diff -purN linux_2.6.24_org/drivers/usb/storage/usb.c linux_2.6.24_olpc/drivers/usb/storage/usb.c +--- linux_2.6.24_org/drivers/usb/storage/usb.c 2008-02-15 20:11:09.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/usb/storage/usb.c 2008-02-15 18:58:11.000000000 +0000 +@@ -244,7 +244,7 @@ static int storage_pre_reset(struct usb_ + return 0; + } + +-static int storage_post_reset(struct usb_interface *iface) ++static void storage_post_reset(struct usb_interface *iface, int reset_resume) + { + struct us_data *us = usb_get_intfdata(iface); + +@@ -256,8 +256,10 @@ static int storage_post_reset(struct usb + /* FIXME: Notify the subdrivers that they need to reinitialize + * the device */ + +- mutex_unlock(&us->dev_mutex); +- return 0; ++ /* If this is a reset-resume then the pre_reset routine wasn't ++ * called, so we don't need to unlock the mutex. */ ++ if (!reset_resume) ++ mutex_unlock(&us->dev_mutex); + } + + /* +diff -purN linux_2.6.24_org/drivers/video/fbmem.c linux_2.6.24_olpc/drivers/video/fbmem.c +--- linux_2.6.24_org/drivers/video/fbmem.c 2008-02-15 20:11:23.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/fbmem.c 2008-02-15 18:58:42.000000000 +0000 +@@ -820,6 +820,53 @@ static void try_to_load(int fb) + #endif /* CONFIG_KMOD */ + + int ++fb_powerup(struct fb_info *info) ++{ ++ int ret = 0; ++ ++ if (!info || info->state == FBINFO_STATE_RUNNING) ++ return 0; ++ ++ if (info->fbops->fb_powerup) ++ ret = info->fbops->fb_powerup(info); ++ ++ if (!ret) { ++ acquire_console_sem(); ++ fb_set_suspend(info, 0); ++ release_console_sem(); ++ } ++ ++ return ret; ++} ++ ++int ++fb_powerdown(struct fb_info *info) ++{ ++ int ret = 0; ++ ++ if (!info || info->state == FBINFO_STATE_SUSPENDED) ++ return 0; ++ ++ /* Tell everybody that the fbdev is going down */ ++ acquire_console_sem(); ++ fb_set_suspend(info, 1); ++ release_console_sem(); ++ ++ if (info->fbops->fb_powerdown) ++ ret = info->fbops->fb_powerdown(info); ++ ++ /* If the power down failed, then un-notify */ ++ ++ if (ret) { ++ acquire_console_sem(); ++ fb_set_suspend(info, 0); ++ release_console_sem(); ++ } ++ ++ return ret; ++} ++ ++int + fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var) + { + struct fb_fix_screeninfo *fix = &info->fix; +diff -purN linux_2.6.24_org/drivers/video/geode/display_gx.c linux_2.6.24_olpc/drivers/video/geode/display_gx.c +--- linux_2.6.24_org/drivers/video/geode/display_gx.c 2008-02-15 20:11:23.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/geode/display_gx.c 2008-02-15 18:58:41.000000000 +0000 +@@ -11,26 +11,44 @@ + * Free Software Foundation; either version 2 of the License, or * (at your + * option) any later version. + */ ++ ++#include + #include + #include + #include + #include + #include + #include ++#include + + #include "geodefb.h" + #include "display_gx.h" + +-#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE +-unsigned int gx_frame_buffer_size(void) ++static inline void rmwl(u32 val, u32 *reg) + { +- return CONFIG_FB_GEODE_GX_FBSIZE; ++ u32 in = readl(reg); ++ if (in != val) ++ writel(val, reg); + } +-#else ++ + unsigned int gx_frame_buffer_size(void) + { + unsigned int val; + ++#ifdef CONFIG_OLPC ++ if (machine_is_olpc() && !olpc_has_vsa()) { ++ u32 hi,lo; ++ rdmsr(GLIU0_P2D_RO0, lo, hi); ++ ++ /* Top page number */ ++ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20); ++ ++ val -= (lo & 0x000fffff); /* Subtract bottom page number */ ++ val += 1; /* Adjust page count */ ++ return (val << 12); ++ } ++#endif ++ + /* FB size is reported by a virtual register */ + /* Virtual register class = 0x02 */ + /* VG_MEM_SIZE(512Kb units) = 0x00 */ +@@ -41,7 +59,6 @@ unsigned int gx_frame_buffer_size(void) + val = (unsigned int)(inw(0xAC1E)) & 0xFFl; + return (val << 19); + } +-#endif + + int gx_line_delta(int xres, int bpp) + { +@@ -63,23 +80,23 @@ static void gx_set_mode(struct fb_info * + gcfg = readl(par->dc_regs + DC_GENERAL_CFG); + dcfg = readl(par->dc_regs + DC_DISPLAY_CFG); + +- /* Disable the timing generator. */ +- dcfg &= ~(DC_DCFG_TGEN); +- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); +- +- /* Wait for pending memory requests before disabling the FIFO load. */ +- udelay(100); +- +- /* Disable FIFO load and compression. */ +- gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE); +- writel(gcfg, par->dc_regs + DC_GENERAL_CFG); +- +- /* Setup DCLK and its divisor. */ +- par->vid_ops->set_dclk(info); +- +- /* +- * Setup new mode. +- */ ++ /* Programming the clock is costly and ugly, so avoid if if we can */ ++ ++ if (par->curdclk != info->var.pixclock) { ++ /* Disable the timing generator. */ ++ dcfg &= ~(DC_DCFG_TGEN); ++ writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); ++ ++ /* Wait for pending memory requests before disabling the FIFO load. */ ++ udelay(100); ++ ++ /* Disable FIFO load and compression. */ ++ gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE); ++ writel(gcfg, par->dc_regs + DC_GENERAL_CFG); ++ ++ /* Setup DCLK and its divisor. */ ++ par->vid_ops->set_dclk(info); ++ } + + /* Clear all unused feature bits. */ + gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE; +@@ -90,12 +107,13 @@ static void gx_set_mode(struct fb_info * + gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE; + + /* Framebuffer start offset. */ +- writel(0, par->dc_regs + DC_FB_ST_OFFSET); ++ rmwl(0, par->dc_regs + DC_FB_ST_OFFSET); + + /* Line delta and line buffer length. */ +- writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH); +- writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2, +- par->dc_regs + DC_LINE_SIZE); ++ rmwl(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH); ++ ++ rmwl(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2, ++ par->dc_regs + DC_LINE_SIZE); + + + /* Enable graphics and video data and unmask address lines. */ +@@ -134,17 +152,16 @@ static void gx_set_mode(struct fb_info * + vblankend = vsyncend + info->var.upper_margin; + vtotal = vblankend; + +- writel((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING); +- writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING); +- writel((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING); +- +- writel((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING); +- writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING); +- writel((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING); ++ rmwl((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING); ++ rmwl((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING); ++ rmwl((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING); ++ rmwl((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING); ++ rmwl((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING); ++ rmwl((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING); + + /* Write final register values. */ +- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); +- writel(gcfg, par->dc_regs + DC_GENERAL_CFG); ++ rmwl(dcfg, par->dc_regs + DC_DISPLAY_CFG); ++ rmwl(gcfg, par->dc_regs + DC_GENERAL_CFG); + + par->vid_ops->configure_display(info); + +diff -purN linux_2.6.24_org/drivers/video/geode/display_gx.h linux_2.6.24_olpc/drivers/video/geode/display_gx.h +--- linux_2.6.24_org/drivers/video/geode/display_gx.h 2008-02-15 20:11:23.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/geode/display_gx.h 2008-02-15 18:58:41.000000000 +0000 +@@ -20,6 +20,9 @@ extern struct geode_dc_ops gx_dc_ops; + #define GLD_MSR_CONFIG 0xC0002001 + #define GLD_MSR_CONFIG_DM_FP 0x40 + ++/* Used for memory dection on the OLPC */ ++#define GLIU0_P2D_RO0 0x10000029 ++ + /* Display controller registers */ + + #define DC_UNLOCK 0x00 +diff -purN linux_2.6.24_org/drivers/video/geode/geodefb.h linux_2.6.24_olpc/drivers/video/geode/geodefb.h +--- linux_2.6.24_org/drivers/video/geode/geodefb.h 2008-02-15 20:11:23.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/geode/geodefb.h 2008-02-15 18:58:41.000000000 +0000 +@@ -12,6 +12,10 @@ + #ifndef __GEODEFB_H__ + #define __GEODEFB_H__ + ++#define FB_POWER_STATE_OFF 0 ++#define FB_POWER_STATE_SUSPEND 1 ++#define FB_POWER_STATE_ON 2 ++ + struct geodefb_info; + + struct geode_dc_ops { +@@ -21,18 +25,24 @@ struct geode_dc_ops { + + struct geode_vid_ops { + void (*set_dclk)(struct fb_info *); ++ unsigned int (*get_dclk)(struct fb_info *); + void (*configure_display)(struct fb_info *); + int (*blank_display)(struct fb_info *, int blank_mode); + }; + + struct geodefb_par { + int enable_crt; ++ int fbactive; /* True if the current console is in KD_GRAPHICS mode */ + int panel_x; /* dimensions of an attached flat panel, non-zero => enable panel */ + int panel_y; ++ unsigned int curdclk; /* Used by GX to avoid unnessesary clock switching */ + void __iomem *dc_regs; + void __iomem *vid_regs; ++ void __iomem *gp_regs; + struct geode_dc_ops *dc_ops; + struct geode_vid_ops *vid_ops; ++ ++ int state; + }; + + #endif /* !__GEODEFB_H__ */ +diff -purN linux_2.6.24_org/drivers/video/geode/geode_regs.h linux_2.6.24_olpc/drivers/video/geode/geode_regs.h +--- linux_2.6.24_org/drivers/video/geode/geode_regs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/drivers/video/geode/geode_regs.h 2008-02-15 18:58:41.000000000 +0000 +@@ -0,0 +1,255 @@ ++/* This header file defines the registers and suspend/resume ++ structures for the Geode GX and LX. The lxfb driver defines ++ _GEODELX_ before including this file, which will unlock the ++ extra registers that are only valid for LX. ++*/ ++ ++#ifndef _GEODE_REGS_H_ ++#define _GEODE_REGS_H_ ++ ++/* MSRs */ ++ ++#define GX_VP_MSR_PAD_SELECT 0xC0002011 ++#define LX_VP_MSR_PAD_SELECT 0x48000011 ++ ++#define GEODE_MSR_GLCP_DOTPLL 0x4c000015 ++ ++#define GLCP_DOTPLL_RESET (1 << 0) ++#define GLCP_DOTPLL_BYPASS (1 << 15) ++#define GLCP_DOTPLL_HALFPIX (1 << 24) ++#define GLCP_DOTPLL_LOCK (1 << 25) ++ ++/* Registers */ ++#define VP_FP_START 0x400 ++ ++ ++#ifdef _GEODELX_ ++ ++#define GP_REG_SIZE 0x7C ++#define DC_REG_SIZE 0xF0 ++#define VP_REG_SIZE 0x158 ++#define FP_REG_SIZE 0x70 ++ ++#else ++ ++#define GP_REG_SIZE 0x50 ++#define DC_REG_SIZE 0x90 ++#define VP_REG_SIZE 0x138 ++#define FP_REG_SIZE 0x70 ++ ++#endif ++ ++#define DC_PAL_SIZE 0x105 ++#define VP_COEFF_COUNT 512 ++#define DC_HFILT_SIZE 256 ++#define DC_VFILT_SIZE 256 ++ ++struct geoderegs { ++ ++ struct { ++ u64 padsel; ++ u64 dotpll; ++ ++#ifdef _GEODELX_ ++ u64 dfglcfg; ++ u64 dcspare; ++#else ++ u64 rstpll; ++#endif ++ } msr; ++ ++ union { ++ unsigned char b[GP_REG_SIZE]; ++ struct { ++ u32 dst_offset; /* 0x00 */ ++ u32 src_offset; /* 0x04 */ ++ u32 stride; /* 0x08 */ ++ u32 wid_height; /* 0x0C */ ++ u32 src_color_fg; /* 0x10 */ ++ u32 src_color_bg; /* 0x14 */ ++ u32 pat_color_0; /* 0x18 */ ++ u32 pat_color_1; /* 0x1C */ ++ u32 pat_color_2; /* 0x20 */ ++ u32 pat_color_3; /* 0x24 */ ++ u32 pat_color_4; /* 0x28 */ ++ u32 pat_color_5; /* 0x2C */ ++ u32 pat_data_0; /* 0x30 */ ++ u32 pat_data_1; /* 0x34 */ ++ u32 raster_mode; /* 0x38 */ ++ u32 vector_mode; /* 0x3C */ ++ u32 blt_mode; /* 0x40 */ ++ u32 blit_status; /* 0x4C */ ++ u32 hst_src; /* 0x48 */ ++ u32 base_offset; /* 0x4C */ ++ ++#ifdef _GEODELX_ ++ u32 cmd_top; /* 0x50 */ ++ u32 cmd_bot; /* 0x54 */ ++ u32 cmd_read; /* 0x58 */ ++ u32 cmd_write; /* 0x5C */ ++ u32 ch3_offset; /* 0x60 */ ++ u32 ch3_mode_str; /* 0x64 */ ++ u32 ch3_width; /* 0x68 */ ++ u32 ch3_hsrc; /* 0x6C */ ++ u32 lut_index; /* 0x70 */ ++ u32 lut_data; /* 0x74 */ ++ u32 int_cntrl; /* 0x78 */ ++#endif ++ } r; ++ } gp; ++ ++ union { ++ unsigned char b[DC_REG_SIZE]; ++ ++ struct { ++ u32 unlock; /* 0x00 */ ++ u32 gcfg; /* 0x04 */ ++ u32 dcfg; /* 0x08 */ ++ u32 arb; /* 0x0C */ ++ u32 fb_st_offset; /* 0x10 */ ++ u32 cb_st_offset; /* 0x14 */ ++ u32 curs_st_offset; /* 0x18 */ ++ u32 icon_st_offset; /* 0x1C */ ++ u32 vid_y_st_offset; /* 0x20 */ ++ u32 vid_u_st_offset; /* 0x24 */ ++ u32 vid_v_st_offset; /* 0x28 */ ++ u32 dctop; /* 0x2c */ ++ u32 line_size; /* 0x30 */ ++ u32 gfx_pitch; /* 0x34 */ ++ u32 vid_yuv_pitch; /* 0x38 */ ++ u32 rsvd2; /* 0x3C */ ++ u32 h_active_timing; /* 0x40 */ ++ u32 h_blank_timing; /* 0x44 */ ++ u32 h_sync_timing; /* 0x48 */ ++ u32 rsvd3; /* 0x4C */ ++ u32 v_active_timing; /* 0x50 */ ++ u32 v_blank_timing; /* 0x54 */ ++ u32 v_sync_timing; /* 0x58 */ ++ u32 fbactive; /* 0x5C */ ++ u32 dc_cursor_x; /* 0x60 */ ++ u32 dc_cursor_y; /* 0x64 */ ++ u32 dc_icon_x; /* 0x68 */ ++ u32 dc_line_cnt; /* 0x6C */ ++ u32 rsvd5; /* 0x70 - palette address */ ++ u32 rsvd6; /* 0x74 - palette data */ ++ u32 dfifo_diag; /* 0x78 */ ++ u32 cfifo_diag; /* 0x7C */ ++ u32 dc_vid_ds_delta; /* 0x80 */ ++ u32 gliu0_mem_offset; /* 0x84 */ ++ u32 dv_ctl; /* 0x88 - added by LX */ ++ u32 dv_acc; /* 0x8C */ ++ ++#ifdef _GEODELX_ ++ u32 gfx_scale; ++ u32 irq_filt_ctl; ++ u32 filt_coeff1; ++ u32 filt_coeff2; ++ u32 vbi_event_ctl; ++ u32 vbi_odd_ctl; ++ u32 vbi_hor; ++ u32 vbi_ln_odd; ++ u32 vbi_ln_event; ++ u32 vbi_pitch; ++ u32 clr_key; ++ u32 clr_key_mask; ++ u32 clr_key_x; ++ u32 clr_key_y; ++ u32 irq; ++ u32 rsvd8; ++ u32 genlk_ctrl; ++ u32 vid_even_y_st_offset; /* 0xD8 */ ++ u32 vid_even_u_st_offset; /* 0xDC */ ++ u32 vid_even_v_st_offset; /* 0xE0 */ ++ u32 v_active_even_timing; /* 0xE4 */ ++ u32 v_blank_even_timing; /* 0xE8 */ ++ u32 v_sync_even_timing; /* 0xEC */ ++#endif ++ } r; ++ } dc; ++ ++ union { ++ unsigned char b[VP_REG_SIZE]; ++ ++ struct { ++ u64 vcfg; /* 0x00 */ ++ u64 dcfg; /* 0x08 */ ++ u64 vx; /* 0x10 */ ++ u64 vy; /* 0x18 */ ++ u64 vs; /* 0x20 */ ++ u64 vck; /* 0x28 */ ++ u64 vcm; /* 0x30 */ ++ u64 rsvd1; /* 0x38 - Gamma address*/ ++ u64 rsvd2; /* 0x40 - Gamma data*/ ++ u64 slr; /* 0x48 - LX only*/ ++ u64 misc; /* 0x50 */ ++ u64 ccs; /* 0x58 */ ++ u64 vys; /* 0x60 */ ++ u64 vxs; /* 0x68 */ ++ u64 rsvd4; /* 0x70 */ ++ u64 vdc; /* 0x78 */ ++ u64 vco; /* 0x80 */ ++ u64 crc; /* 0x88 */ ++ u64 crc32; /* 0x90 */ ++ u64 vde; /* 0x98 */ ++ u64 cck; /* 0xA0 */ ++ u64 ccm; /* 0xA8 */ ++ u64 cc1; /* 0xB0 */ ++ u64 cc2; /* 0xB8 */ ++ u64 a1x; /* 0xC0 */ ++ u64 a1y; /* 0xC8 */ ++ u64 a1c; /* 0xD0 */ ++ u64 a1t; /* 0xD8 */ ++ u64 a2x; /* 0xE0 */ ++ u64 a2y; /* 0xE8 */ ++ u64 a2c; /* 0xF0 */ ++ u64 a2t; /* 0xF8 */ ++ u64 a3x; /* 0x100 */ ++ u64 a3y; /* 0x108 */ ++ u64 a3c; /* 0x110 */ ++ u64 a3t; /* 0x118 */ ++ u64 vrr; /* 0x120 */ ++ u64 awt; /* 0x128 */ ++ u64 vtm; /* 0x130 */ ++#ifdef _GEODELX_ ++ u64 vye; /* 0x138 */ ++ u64 a1ye; /* 0x140 */ ++ u32 a2ye; /* 0x148 */ ++ u32 a3ye; /* 0x150 */ ++#endif ++ } r; ++ } vp; ++ ++ union { ++ unsigned char b[FP_REG_SIZE]; ++ ++ struct { ++ u64 pt1; /* 0x400 */ ++ u64 pt2; /* 0x408 */ ++ u64 pm; /* 0x410 */ ++ u64 dfc; /* 0x418 */ ++ u64 blfsr; /* 0x420 */ ++ u64 rlfsr; /* 0x428 */ ++ u64 fmi; /* 0x430 */ ++ u64 fmd; /* 0x438 */ ++ u64 rsvd; /* 0x440 */ ++ u64 dca; /* 0x448 */ ++ u64 dmd; /* 0x450 */ ++ u64 crc; /* 0x458 */ ++ u64 fbb; /* 0x460 */ ++ u64 crc32; /* 0x468 */ ++ } r; ++ } fp; ++ ++ u32 pal[DC_PAL_SIZE]; ++ u32 gamma[256]; ++ ++#ifdef _GEODELX_ ++ ++ u32 hcoeff[DC_HFILT_SIZE * 2]; ++ u32 vcoeff[DC_VFILT_SIZE]; ++ ++ u32 vp_coeff[VP_COEFF_COUNT]; ++#endif ++}; ++ ++#endif +diff -purN linux_2.6.24_org/drivers/video/geode/gxfb_core.c linux_2.6.24_olpc/drivers/video/geode/gxfb_core.c +--- linux_2.6.24_org/drivers/video/geode/gxfb_core.c 2008-02-15 20:11:23.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/geode/gxfb_core.c 2008-02-15 18:58:41.000000000 +0000 +@@ -30,12 +30,31 @@ + #include + #include + #include ++#include ++#include ++#include ++#include ++#include + + #include "geodefb.h" + #include "display_gx.h" + #include "video_gx.h" + ++#define FBIOSGAMMA _IOW('F', 0x20, void *) ++#define FBIOGGAMMA _IOW('F', 0x21, void *) ++ ++#ifdef DEBUG ++ ++#define FBIODUMPGP _IOW('F', 0x22, void *) ++#define FBIODUMPDC _IOW('F', 0x23, void *) ++#define FBIODUMPVP _IOW('F', 0x24, void *) ++#define FBIODUMPFP _IOW('F', 0x25, void *) ++ ++#endif ++ + static char *mode_option; ++static int noclear; ++struct fb_info *gxfb_info; + + /* Modes relevant to the GX (taken from modedb.c) */ + static const struct fb_videomode gx_modedb[] __initdata = { +@@ -103,8 +122,20 @@ static const struct fb_videomode gx_mode + { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1200x900-75 - CRT timings for the OLPC mode */ ++ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3, ++ 0, FB_VMODE_NONINTERLACED, 0 } + }; + ++#ifdef CONFIG_OLPC ++static const struct fb_videomode gx_dcon_modedb[] __initdata = { ++ /* The only mode the DCON has is 1200x900 */ ++ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3, ++ 0, FB_VMODE_NONINTERLACED, 0 } ++}; ++#endif ++ ++ + static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) + { + if (var->xres > 1600 || var->yres > 1200) +@@ -137,7 +168,7 @@ static int gxfb_check_var(struct fb_var_ + return 0; + } + +-static int gxfb_set_par(struct fb_info *info) ++int gxfb_set_par(struct fb_info *info) + { + struct geodefb_par *par = info->par; + +@@ -204,16 +235,26 @@ static int gxfb_blank(int blank_mode, st + return par->vid_ops->blank_display(info, blank_mode); + } + ++static int fbsize; ++ + static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev) + { + struct geodefb_par *par = info->par; +- int fb_len; + int ret; + + ret = pci_enable_device(dev); + if (ret < 0) + return ret; + ++ ret = pci_request_region(dev, 1, "gxfb (graphics processor)"); ++ if (ret < 0) ++ return ret; ++ ++ par->gp_regs = ioremap(pci_resource_start(dev, 1), ++ pci_resource_len(dev, 1)); ++ if (!par->gp_regs) ++ return -ENOMEM; ++ + ret = pci_request_region(dev, 3, "gxfb (video processor)"); + if (ret < 0) + return ret; +@@ -232,36 +273,118 @@ static int __init gxfb_map_video_memory( + ret = pci_request_region(dev, 0, "gxfb (framebuffer)"); + if (ret < 0) + return ret; +- if ((fb_len = gx_frame_buffer_size()) < 0) +- return -ENOMEM; ++ ++ /* If the fbsize wasn't specified then try to probe it */ ++ ++ if (!fbsize) { ++ fbsize = gx_frame_buffer_size(); ++ if (fbsize == 0) ++ return -ENOMEM; ++ } ++ + info->fix.smem_start = pci_resource_start(dev, 0); +- info->fix.smem_len = fb_len; ++ info->fix.smem_len = fbsize; + info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len); + if (!info->screen_base) + return -ENOMEM; + +- /* Set the 16MB aligned base address of the graphics memory region ++ /* Set the 16MiB aligned base address of the graphics memory region + * in the display controller */ + + writel(info->fix.smem_start & 0xFF000000, + par->dc_regs + DC_GLIU0_MEM_OFFSET); + +- dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n", ++ dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n", + info->fix.smem_len / 1024, info->fix.smem_start); + + return 0; + } + ++static int gxfb_ioctl( struct fb_info *info, unsigned int cmd, ++ unsigned long arg) ++{ ++ unsigned int gamma[GXFB_GAMMA_DWORDS]; ++ int ret = -EINVAL; ++ struct geodefb_par *par = info->par; ++ int i; ++ ++ switch(cmd) { ++ case FBIOSGAMMA: ++ /* Read the gamma information from the user - 256 dwords */ ++ ++ if (copy_from_user(gamma, (void * __user) arg, GXFB_GAMMA_SIZE)) ++ return -EFAULT; ++ ++ writel(0, par->vid_regs + GX_GAR); ++ ++ /* Sequential writes to the data register will increment the ++ address automatically */ ++ ++ for(i = 0; i < GXFB_GAMMA_DWORDS; i++) ++ writel(gamma[i] & 0xFFFFFF, par->vid_regs + GX_GDR); ++ ++ writel(readl(par->vid_regs + GX_MISC) & ~GX_MISC_GAM_EN, ++ par->vid_regs + GX_MISC); ++ ++ ret = 0; ++ break; ++ ++ case FBIOGGAMMA: ++ if (readl(par->vid_regs + GX_MISC) & GX_MISC_GAM_EN) ++ return -EINVAL; ++ ++ memset(gamma, 0, GXFB_GAMMA_SIZE); ++ writel(0, par->vid_regs + GX_GAR); ++ ++ for(i = 0; i < GXFB_GAMMA_DWORDS;i++) ++ gamma[i] = readl(par->vid_regs + GX_GDR); ++ ++ if (copy_to_user((void * __user) arg, gamma, GXFB_GAMMA_SIZE)) ++ ret = -EFAULT; ++ else ++ ret = 0; ++ ++ break; ++ ++#ifdef DEBUG ++ case FBIODUMPGP: ++ ret = 0; ++ dump_regs(info, 0); ++ break; ++ ++ case FBIODUMPDC: ++ ret = 0; ++ dump_regs(info, 1); ++ break; ++ ++ case FBIODUMPVP: ++ ret = 0; ++ dump_regs(info, 2); ++ break; ++ ++ case FBIODUMPFP: ++ ret = 0; ++ dump_regs(info, 3); ++ break; ++#endif ++ } ++ ++ return ret; ++} ++ + static struct fb_ops gxfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = gxfb_check_var, + .fb_set_par = gxfb_set_par, + .fb_setcolreg = gxfb_setcolreg, + .fb_blank = gxfb_blank, ++ .fb_ioctl = gxfb_ioctl, + /* No HW acceleration for now. */ + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, ++ .fb_powerdown = gxfb_powerdown, ++ .fb_powerup = gxfb_powerup, + }; + + static struct fb_info * __init gxfb_init_fbinfo(struct device *dev) +@@ -303,23 +426,86 @@ static struct fb_info * __init gxfb_init + return info; + } + +-static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id) ++static int gxfb_console_notify(struct notifier_block *self, ++ unsigned long action, void *data) ++{ ++ if (gxfb_info != NULL) { ++ struct geodefb_par *par = gxfb_info->par; ++ par->fbactive = (action == CONSOLE_EVENT_SWITCH_TEXT) ? 0 : 1; ++ } ++ ++ return NOTIFY_OK; ++} ++ ++static struct notifier_block gxfb_console_notifier = { ++ .notifier_call = gxfb_console_notify ++}; ++ ++#ifdef CONFIG_PM ++ ++static int gxfb_suspend(struct pci_dev *pdev, pm_message_t state) ++{ ++ struct fb_info *info = pci_get_drvdata(pdev); ++ struct geodefb_par *par = info->par; ++ ++ if (pdev->dev.power.power_state.event == state.event) ++ return 0; ++ ++ if (state.event == PM_EVENT_SUSPEND) { ++ ++ acquire_console_sem(); ++ gxfb_powerdown(info); ++ ++ par->state = FB_POWER_STATE_OFF; ++ fb_set_suspend(info, 1); ++ ++ release_console_sem(); ++ } ++ ++ pdev->dev.power.power_state = state; ++ return 0; ++} ++ ++static int gxfb_resume(struct pci_dev *pdev) ++{ ++ struct fb_info *info = pci_get_drvdata(pdev); ++ ++ acquire_console_sem(); ++ ++ /* Turn the engine completely on */ ++ ++ if (gxfb_powerup(info)) ++ printk(KERN_ERR "gxfb: Powerup failed\n"); ++ ++ fb_set_suspend(info, 0); ++ release_console_sem(); ++ ++ pdev->dev.power.power_state = PMSG_ON; ++ return 0; ++} ++#endif ++ ++static int __init gxfb_probe(struct pci_dev *pdev, ++ const struct pci_device_id *id) + { + struct geodefb_par *par; +- struct fb_info *info; + int ret; + unsigned long val; + +- info = gxfb_init_fbinfo(&pdev->dev); +- if (!info) ++ struct fb_videomode *modedb_ptr; ++ int modedb_size; ++ ++ gxfb_info = gxfb_init_fbinfo(&pdev->dev); ++ if (gxfb_info == NULL) + return -ENOMEM; +- par = info->par; ++ ++ par = gxfb_info->par; + + /* GX display controller and GX video device. */ + par->dc_ops = &gx_dc_ops; + par->vid_ops = &gx_vid_ops; + +- if ((ret = gxfb_map_video_memory(info, pdev)) < 0) { ++ if ((ret = gxfb_map_video_memory(gxfb_info, pdev)) < 0) { + dev_err(&pdev->dev, "failed to map frame buffer or controller registers\n"); + goto err; + } +@@ -333,32 +519,60 @@ static int __init gxfb_probe(struct pci_ + else + par->enable_crt = 1; + +- ret = fb_find_mode(&info->var, info, mode_option, +- gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16); ++ /* Get the current dotclock */ ++ ++ par->curdclk = (par->vid_ops->get_dclk) ? par->vid_ops->get_dclk(gxfb_info) : 0; ++ ++ /* We need to determine a display mode right now, so we will ++ * check to see if the DCON was previously detected by the BIOS ++ * and use that to make our mode database decision. ++ */ ++ ++ modedb_ptr = (struct fb_videomode *) gx_modedb; ++ modedb_size = ARRAY_SIZE(gx_modedb); ++ ++#ifdef CONFIG_OLPC ++ if (olpc_has_dcon()) { ++ modedb_ptr = (struct fb_videomode *) gx_dcon_modedb; ++ modedb_size = ARRAY_SIZE(gx_dcon_modedb); ++ } ++#endif ++ ++ ret = fb_find_mode(&gxfb_info->var, gxfb_info, mode_option, ++ modedb_ptr, modedb_size, NULL, 16); ++ + if (ret == 0 || ret == 4) { + dev_err(&pdev->dev, "could not find valid video mode\n"); + ret = -EINVAL; + goto err; + } + ++ /* Clear the screen of garbage, unless noclear was specified, ++ * in which case we assume the user knows what he is doing */ ++ ++ if (!noclear) ++ memset_io(gxfb_info->screen_base, 0, gxfb_info->fix.smem_len); ++ ++ gxfb_check_var(&gxfb_info->var, gxfb_info); ++ gxfb_set_par(gxfb_info); ++ ++ /* We are powered up */ ++ par->state = FB_POWER_STATE_ON; + +- /* Clear the frame buffer of garbage. */ +- memset_io(info->screen_base, 0, info->fix.smem_len); + +- gxfb_check_var(&info->var, info); +- gxfb_set_par(info); ++ console_event_register(&gxfb_console_notifier); + +- if (register_framebuffer(info) < 0) { ++ if (register_framebuffer(gxfb_info) < 0) { + ret = -EINVAL; + goto err; + } +- pci_set_drvdata(pdev, info); +- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id); ++ pci_set_drvdata(pdev, gxfb_info); ++ printk(KERN_INFO "fb%d: %s frame buffer device\n", gxfb_info->node, gxfb_info->fix.id); + return 0; + + err: +- if (info->screen_base) { +- iounmap(info->screen_base); ++ if (gxfb_info->screen_base) { ++ iounmap(gxfb_info->screen_base); + pci_release_region(pdev, 0); + } + if (par->vid_regs) { +@@ -370,8 +584,9 @@ static int __init gxfb_probe(struct pci_ + pci_release_region(pdev, 2); + } + +- if (info) +- framebuffer_release(info); ++ if (gxfb_info) ++ framebuffer_release(gxfb_info); ++ + return ret; + } + +@@ -397,9 +612,7 @@ static void gxfb_remove(struct pci_dev * + } + + static struct pci_device_id gxfb_id_table[] = { +- { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO, +- PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16, +- 0xff0000, 0 }, ++ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO) }, + { 0, } + }; + +@@ -410,22 +623,30 @@ static struct pci_driver gxfb_driver = { + .id_table = gxfb_id_table, + .probe = gxfb_probe, + .remove = gxfb_remove, ++#ifdef CONFIG_PM ++ .suspend = gxfb_suspend, ++ .resume = gxfb_resume ++#endif + }; + + #ifndef MODULE +-static int __init gxfb_setup(char *options) +-{ ++static int __init gxfb_setup(char *options) { + + char *opt; + + if (!options || !*options) + return 0; + +- while ((opt = strsep(&options, ",")) != NULL) { ++ while((opt = strsep(&options, ",")) != NULL) { + if (!*opt) + continue; + +- mode_option = opt; ++ if (!strncmp(opt, "fbsize:", 7)) ++ fbsize = simple_strtoul(opt+7, NULL, 0); ++ else if (!strcmp(opt, "noclear")) ++ noclear = 1; ++ else ++ mode_option = opt; + } + + return 0; +@@ -444,7 +665,6 @@ static int __init gxfb_init(void) + #endif + return pci_register_driver(&gxfb_driver); + } +- + static void __exit gxfb_cleanup(void) + { + pci_unregister_driver(&gxfb_driver); +@@ -456,5 +676,8 @@ module_exit(gxfb_cleanup); + module_param(mode_option, charp, 0); + MODULE_PARM_DESC(mode_option, "video mode (x[-][@])"); + ++module_param(fbsize, int, 0); ++MODULE_PARM_DESC(fbsize, "video memory size"); ++ + MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX"); + MODULE_LICENSE("GPL"); +diff -purN linux_2.6.24_org/drivers/video/geode/Kconfig linux_2.6.24_olpc/drivers/video/geode/Kconfig +--- linux_2.6.24_org/drivers/video/geode/Kconfig 2008-02-15 20:11:23.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/geode/Kconfig 2008-02-15 18:58:41.000000000 +0000 +@@ -38,26 +38,6 @@ config FB_GEODE_GX + + If unsure, say N. + +-config FB_GEODE_GX_SET_FBSIZE +- bool "Manually specify the Geode GX framebuffer size" +- depends on FB_GEODE_GX +- default n +- ---help--- +- If you want to manually specify the size of your GX framebuffer, +- say Y here, otherwise say N to dynamically probe it. +- +- Say N unless you know what you are doing. +- +-config FB_GEODE_GX_FBSIZE +- hex "Size of the GX framebuffer, in bytes" +- depends on FB_GEODE_GX_SET_FBSIZE +- default "0x1600000" +- ---help--- +- Specify the size of the GX framebuffer. Normally, you will +- want this to be MB aligned. Common values are 0x80000 (8MB) +- and 0x1600000 (16MB). Don't change this unless you know what +- you are doing +- + config FB_GEODE_GX1 + tristate "AMD Geode GX1 framebuffer support (EXPERIMENTAL)" + depends on FB && FB_GEODE && EXPERIMENTAL +diff -purN linux_2.6.24_org/drivers/video/geode/lxfb_core.c linux_2.6.24_olpc/drivers/video/geode/lxfb_core.c +--- linux_2.6.24_org/drivers/video/geode/lxfb_core.c 2008-02-15 20:11:23.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/geode/lxfb_core.c 2008-02-15 18:58:41.000000000 +0000 +@@ -21,7 +21,8 @@ + #include + #include + #include +-#include ++#include ++#include + + #include "lxfb.h" + +@@ -35,186 +36,84 @@ static int fbsize; + */ + + const struct fb_videomode geode_modedb[] __initdata = { +- /* 640x480-60 */ +- { NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2, ++ /* 640x480-60 VESA */ ++ { NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2, ++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 640x480-75 VESA */ ++ { NULL, 75, 640, 480, 31746, 120, 16, 16, 01, 64, 3, ++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 640x480-85 VESA */ ++ { NULL, 85, 640, 480, 27777, 80, 56, 25, 01, 56, 3, ++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 800x600-60 VESA */ ++ { NULL, 60, 800, 600, 25000, 88, 40, 23, 01, 128, 4, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 800x600-75 VESA */ ++ { NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 800x600-85 VESA */ ++ { NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1024x768-60 VESA */ ++ { NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6, ++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1024x768-75 VESA */ ++ { NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1024x768-85 VESA */ ++ { NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x960-60 VESA */ ++ { NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x960-85 VESA */ ++ { NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x1024-60 VESA */ ++ { NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x1024-75 VESA */ ++ { NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x1024-85 VESA */ ++ { NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x400-70 */ +- { NULL, 70, 640, 400, 39770, 40, 8, 28, 5, 96, 2, +- FB_SYNC_HOR_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-70 */ +- { NULL, 70, 640, 480, 35014, 88, 24, 15, 2, 64, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-72 */ +- { NULL, 72, 640, 480, 32102, 120, 16, 20, 1, 40, 3, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-75 */ +- { NULL, 75, 640, 480, 31746, 120, 16, 16, 1, 64, 3, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-85 */ +- { NULL, 85, 640, 480, 27780, 80, 56, 25, 1, 56, 3, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-90 */ +- { NULL, 90, 640, 480, 26392, 96, 32, 22, 1, 64, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-100 */ +- { NULL, 100, 640, 480, 23167, 104, 40, 25, 1, 64, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-60 */ +- { NULL, 60, 640, 480, 39682, 48, 16, 25, 10, 88, 2, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-56 */ +- { NULL, 56, 800, 600, 27901, 128, 24, 22, 1, 72, 2, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-60 */ +- { NULL, 60, 800, 600, 25131, 72, 32, 23, 1, 136, 4, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-70 */ +- { NULL, 70, 800, 600, 21873, 120, 40, 21, 4, 80, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-72 */ +- { NULL, 72, 800, 600, 20052, 64, 56, 23, 37, 120, 6, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-75 */ +- { NULL, 75, 800, 600, 20202, 160, 16, 21, 1, 80, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-85 */ +- { NULL, 85, 800, 600, 17790, 152, 32, 27, 1, 64, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-90 */ +- { NULL, 90, 800, 600, 16648, 128, 40, 28, 1, 88, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-100 */ +- { NULL, 100, 800, 600, 14667, 136, 48, 27, 1, 88, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-60 */ +- { NULL, 60, 800, 600, 25131, 88, 40, 23, 1, 128, 4, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-60 */ +- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-70 */ +- { NULL, 70, 1024, 768, 13346, 144, 24, 29, 3, 136, 6, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-72 */ +- { NULL, 72, 1024, 768, 12702, 168, 56, 29, 4, 112, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-75 */ +- { NULL, 75, 1024, 768, 12703, 176, 16, 28, 1, 96, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-85 */ +- { NULL, 85, 1024, 768, 10581, 208, 48, 36, 1, 96, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-90 */ +- { NULL, 90, 1024, 768, 9981, 176, 64, 37, 1, 112, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-100 */ +- { NULL, 100, 1024, 768, 8825, 184, 72, 42, 1, 112, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-60 */ +- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-60 */ +- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-70 */ +- { NULL, 70, 1152, 864, 10254, 192, 72, 32, 8, 120, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-72 */ +- { NULL, 72, 1152, 864, 9866, 200, 72, 33, 7, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-75 */ +- { NULL, 75, 1152, 864, 9259, 256, 64, 32, 1, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-85 */ +- { NULL, 85, 1152, 864, 8357, 200, 72, 37, 3, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-90 */ +- { NULL, 90, 1152, 864, 7719, 208, 80, 42, 9, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-100 */ +- { NULL, 100, 1152, 864, 6947, 208, 80, 48, 3, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-60 */ +- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-60 */ +- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-70 */ +- { NULL, 70, 1280, 1024, 7719, 224, 88, 38, 6, 136, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-72 */ +- { NULL, 72, 1280, 1024, 7490, 224, 88, 39, 7, 136, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-75 */ +- { NULL, 75, 1280, 1024, 7409, 248, 16, 38, 1, 144, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-85 */ +- { NULL, 85, 1280, 1024, 6351, 224, 64, 44, 1, 160, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-90 */ +- { NULL, 90, 1280, 1024, 5791, 240, 96, 51, 12, 144, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-100 */ +- { NULL, 100, 1280, 1024, 5212, 240, 96, 57, 6, 144, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-60 */ +- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-60 */ ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1600x1200-60 VESA */ + { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-70 */ +- { NULL, 70, 1600, 1200, 5291, 304, 64, 46, 1, 192, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-72 */ +- { NULL, 72, 1600, 1200, 5053, 288, 112, 47, 13, 176, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-75 */ ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1600x1200-75 VESA */ + { NULL, 75, 1600, 1200, 4938, 304, 64, 46, 1, 192, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-85 */ ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1600x1200-85 VESA */ + { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-90 */ +- { NULL, 90, 1600, 1200, 3981, 304, 128, 60, 1, 176, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-100 */ +- { NULL, 100, 1600, 1200, 3563, 304, 128, 67, 1, 176, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-60 */ +- { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-60 */ +- { NULL, 60, 1920, 1440, 4273, 344, 128, 56, 1, 208, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-70 */ +- { NULL, 70, 1920, 1440, 3593, 360, 152, 55, 8, 208, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-72 */ +- { NULL, 72, 1920, 1440, 3472, 360, 152, 68, 4, 208, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-75 */ +- { NULL, 75, 1920, 1440, 3367, 352, 144, 56, 1, 224, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-85 */ +- { NULL, 85, 1920, 1440, 2929, 368, 152, 68, 1, 216, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1200x900-75 - CRT timings for the OLPC mode */ ++ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3, ++ 0, FB_VMODE_NONINTERLACED, 0 } + }; + ++#ifdef CONFIG_OLPC ++const struct fb_videomode olpc_dcon_modedb[] __initdata = { ++ /* The only mode the DCON has is 1200x900 */ ++ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, 0 } ++}; ++#endif ++ + static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) + { + if (var->xres > 1920 || var->yres > 1440) +@@ -255,8 +154,7 @@ static int lxfb_set_par(struct fb_info * + fb_alloc_cmap(&info->cmap, 1<var.bits_per_pixel, 0); + } + +- info->fix.line_length = lx_get_pitch(info->var.xres, +- info->var.bits_per_pixel); ++ info->fix.line_length = lx_get_pitch(info->var.xres, info->var.bits_per_pixel); + + lx_set_mode(info); + return 0; +@@ -371,24 +269,61 @@ static int __init lxfb_map_video_memory( + writel(info->fix.smem_start & 0xFF000000, + par->dc_regs + DC_PHY_MEM_OFFSET); + +- writel(0, par->dc_regs + DC_UNLOCK); +- + dev_info(&dev->dev, "%d KB of video memory at 0x%lx\n", + info->fix.smem_len / 1024, info->fix.smem_start); + + return 0; + } + ++static int lxfb_set_gamma(struct fb_info *info, void * __user data) ++{ ++ unsigned int gamma[LXFB_GAMMA_DWORDS]; ++ ++ if (copy_from_user(gamma, data, LXFB_GAMMA_SIZE)) ++ return -EFAULT; ++ ++ lx_set_gamma(info, gamma, LXFB_GAMMA_SIZE); ++ return 0; ++} ++ ++static int lxfb_get_gamma(struct fb_info *info, void * __user data) ++{ ++ unsigned int gamma[LXFB_GAMMA_DWORDS]; ++ memset(gamma, 0, sizeof(gamma)); ++ ++ lx_get_gamma(info, gamma, LXFB_GAMMA_DWORDS); ++ ++ return copy_to_user(data, gamma, LXFB_GAMMA_SIZE) ? ++ -EFAULT : 0; ++} ++ ++static int lxfb_ioctl( struct fb_info *info, unsigned int cmd, ++ unsigned long arg) ++{ ++ switch(cmd) { ++ case FBIOSGAMMA: ++ return lxfb_set_gamma(info, (void * __user) arg); ++ ++ case FBIOGGAMMA: ++ return lxfb_get_gamma(info, (void * __user) arg); ++ } ++ ++ return -ENOTTY; ++} ++ + static struct fb_ops lxfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = lxfb_check_var, + .fb_set_par = lxfb_set_par, + .fb_setcolreg = lxfb_setcolreg, + .fb_blank = lxfb_blank, ++ .fb_ioctl = lxfb_ioctl, + /* No HW acceleration for now. */ + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, ++ .fb_powerdown = lx_shutdown, ++ .fb_powerup = lx_powerup, + }; + + static struct fb_info * __init lxfb_init_fbinfo(struct device *dev) +@@ -431,6 +366,45 @@ static struct fb_info * __init lxfb_init + return info; + } + ++#ifdef CONFIG_PM ++ ++static int lxfb_suspend(struct pci_dev *pdev, pm_message_t state) ++{ ++ struct fb_info *info = pci_get_drvdata(pdev); ++ ++ if (pdev->dev.power.power_state.event == state.event) ++ return 0; ++ ++ if (state.event == PM_EVENT_SUSPEND) { ++ ++ acquire_console_sem(); ++ lx_shutdown(info); ++ fb_set_suspend(info, 1); ++ release_console_sem(); ++ } ++ ++ pdev->dev.power.power_state = state; ++ return 0; ++} ++ ++static int lxfb_resume(struct pci_dev *pdev) ++{ ++ struct fb_info *info = pci_get_drvdata(pdev); ++ ++ acquire_console_sem(); ++ ++ /* Turn the engine completely on */ ++ ++ lx_powerup(info); ++ fb_set_suspend(info, 0); ++ release_console_sem(); ++ ++ pdev->dev.power.power_state = PMSG_ON; ++ return 0; ++} ++ ++#endif ++ + static int __init lxfb_probe(struct pci_dev *pdev, + const struct pci_device_id *id) + { +@@ -467,6 +441,13 @@ static int __init lxfb_probe(struct pci_ + modedb_ptr = (struct fb_videomode *) geode_modedb; + modedb_size = ARRAY_SIZE(geode_modedb); + ++#ifdef CONFIG_OLPC ++ if (olpc_has_dcon()) { ++ modedb_ptr = (struct fb_videomode *) olpc_dcon_modedb; ++ modedb_size = ARRAY_SIZE(olpc_dcon_modedb); ++ } ++#endif ++ + ret = fb_find_mode(&info->var, info, mode_option, + modedb_ptr, modedb_size, NULL, 16); + +@@ -556,6 +537,10 @@ static struct pci_driver lxfb_driver = { + .id_table = lxfb_id_table, + .probe = lxfb_probe, + .remove = lxfb_remove, ++#ifdef CONFIG_PM ++ .suspend = lxfb_suspend, ++ .resume = lxfb_resume ++#endif + }; + + #ifndef MODULE +diff -purN linux_2.6.24_org/drivers/video/geode/lxfb.h linux_2.6.24_olpc/drivers/video/geode/lxfb.h +--- linux_2.6.24_org/drivers/video/geode/lxfb.h 2008-02-15 20:11:23.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/geode/lxfb.h 2008-02-15 18:58:41.000000000 +0000 +@@ -25,10 +25,23 @@ void lx_set_mode(struct fb_info *); + void lx_get_gamma(struct fb_info *, unsigned int *, int); + void lx_set_gamma(struct fb_info *, unsigned int *, int); + unsigned int lx_framebuffer_size(void); ++int lx_shutdown(struct fb_info *); ++int lx_powerup(struct fb_info *); + int lx_blank_display(struct fb_info *, int); + void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int, + unsigned int, unsigned int); + ++ ++ ++/* ioctl() defines */ ++ ++#define FBIOSGAMMA _IOW('F', 0x20, void *) ++#define FBIOGGAMMA _IOW('F', 0x21, void *) ++ ++/* General definitions */ ++#define LXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */ ++#define LXFB_GAMMA_SIZE (LXFB_GAMMA_DWORDS * sizeof(unsigned int)) ++ + /* MSRS */ + + #define MSR_LX_GLD_CONFIG 0x48002001 +@@ -127,7 +140,7 @@ void lx_set_palette_reg(struct fb_info * + + #define DC_GFX_SCALE 0x90 + #define DC_IRQ_FILT_CTL 0x94 +- ++#define DC_IRQFILT_H_FILT_SEL 0x00000400 + + #define DC_IRQ 0xC8 + #define DC_IRQ_MASK (1 << 0) +diff -purN linux_2.6.24_org/drivers/video/geode/lxfb_ops.c linux_2.6.24_olpc/drivers/video/geode/lxfb_ops.c +--- linux_2.6.24_org/drivers/video/geode/lxfb_ops.c 2008-02-15 20:11:23.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/geode/lxfb_ops.c 2008-02-15 18:58:41.000000000 +0000 +@@ -11,11 +11,15 @@ + #include + #include + #include +-#include +-#include ++#include ++#include ++#include + + #include "lxfb.h" + ++#define _GEODELX_ ++#include "geode_regs.h" ++ + /* TODO + * Support panel scaling + * Add acceleration +@@ -290,6 +294,19 @@ unsigned int lx_framebuffer_size(void) + { + unsigned int val; + ++#ifdef CONFIG_OLPC ++ if (machine_is_olpc() && !olpc_has_vsa()) { ++ u32 hi,lo; ++ rdmsr(MSR_LX_GLIU0_P2D_RO0, lo, hi); ++ ++ /* Top page number */ ++ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20); ++ val -= (lo & 0x000fffff); /* Subtract bottom page number */ ++ val += 1; /* Adjust page count */ ++ return (val << 12); ++ } ++#endif ++ + /* The frame buffer size is reported by a VSM in VSA II */ + /* Virtual Register Class = 0x02 */ + /* VG_MEM_SIZE (1MB units) = 0x00 */ +@@ -301,6 +318,34 @@ unsigned int lx_framebuffer_size(void) + return (val << 20); + } + ++void lx_set_gamma(struct fb_info *info, unsigned int *gamma, int len) ++{ ++ int i; ++ struct lxfb_par *par = info->par; ++ ++ writel(0, par->df_regs + DF_PAR); ++ ++ /* Sequential writes to the data register will increment the ++ address automatically */ ++ ++ for(i = 0; i < len; i++) ++ writel(gamma[i] & 0xFFFFFF, par->df_regs + DF_PDR); ++ ++ writel(readl(par->df_regs + DF_MISC) & ~DF_MISC_GAM_BYPASS, ++ par->df_regs + DF_MISC); ++} ++ ++void lx_get_gamma(struct fb_info *info, unsigned int *gamma, int len) ++{ ++ int i; ++ struct lxfb_par *par = info->par; ++ ++ writel(0, par->df_regs + DF_PAR); ++ ++ for(i = 0; i < len;i++) ++ gamma[i] = readl(par->df_regs + DF_PDR); ++} ++ + void lx_set_mode(struct fb_info *info) + { + struct lxfb_par *par = info->par; +@@ -313,6 +358,7 @@ void lx_set_mode(struct fb_info *info) + int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal; + + /* Unlock the DC registers */ ++ readl(par->dc_regs + DC_UNLOCK); + writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK); + + lx_graphics_disable(info); +@@ -483,54 +529,408 @@ void lx_set_palette_reg(struct fb_info * + writel(val, par->dc_regs + DC_PAL_DATA); + } + ++static int lx_blank_mode = FB_BLANK_UNBLANK; ++ + int lx_blank_display(struct fb_info *info, int blank_mode) + { + struct lxfb_par *par = info->par; +- u32 dcfg, fp_pm; +- int blank, hsync, vsync; ++ u32 dcfg, val; ++ ++ if (blank_mode == lx_blank_mode) ++ return 0; ++ ++ writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK); ++ ++ if (lx_blank_mode == FB_BLANK_POWERDOWN) { ++ val = readl(par->df_regs + DF_FP_PM); ++ writel(val | DF_FP_PM_P, par->df_regs + DF_FP_PM); ++ val = readl(par->df_regs + DF_MISC) & ~DF_MISC_DAC_PWRDN; ++ writel(val, par->df_regs + DF_MISC); ++ ++ val = readl(par->dc_regs + DC_GENERAL_CFG) | DC_GCFG_DFLE; ++ writel(val, par->dc_regs + DC_GENERAL_CFG); ++ ++ val = readl(par->dc_regs + DC_DISPLAY_CFG) | DC_DCFG_TGEN; ++ writel(val, par->dc_regs + DC_DISPLAY_CFG); ++ } ++ ++ dcfg = readl(par->df_regs + DF_DISPLAY_CFG); + + /* CRT power saving modes. */ + switch (blank_mode) { + case FB_BLANK_UNBLANK: +- blank = 0; hsync = 1; vsync = 1; ++ dcfg |= DF_DCFG_CRT_EN | DF_DCFG_HSYNC_EN | DF_DCFG_VSYNC_EN; ++ dcfg |= DF_DCFG_DAC_BL_EN; + break; + case FB_BLANK_NORMAL: +- blank = 1; hsync = 1; vsync = 1; ++ dcfg |= DF_DCFG_CRT_EN | DF_DCFG_HSYNC_EN | DF_DCFG_VSYNC_EN; ++ dcfg |= DF_DCFG_DAC_BL_EN; + break; + case FB_BLANK_VSYNC_SUSPEND: +- blank = 1; hsync = 1; vsync = 0; ++ dcfg |= DF_DCFG_CRT_EN | DF_DCFG_HSYNC_EN | DF_DCFG_DAC_BL_EN; ++ dcfg &= ~DF_DCFG_VSYNC_EN; + break; + case FB_BLANK_HSYNC_SUSPEND: +- blank = 1; hsync = 0; vsync = 1; ++ dcfg |= DF_DCFG_CRT_EN | DF_DCFG_VSYNC_EN | DF_DCFG_DAC_BL_EN; ++ dcfg &= ~DF_DCFG_HSYNC_EN; + break; + case FB_BLANK_POWERDOWN: +- blank = 1; hsync = 0; vsync = 0; ++ dcfg &= ~DF_DCFG_DAC_BL_EN; ++ dcfg &= ~(DF_DCFG_CRT_EN | DF_DCFG_HSYNC_EN | DF_DCFG_VSYNC_EN); + break; + default: ++ writel(0, par->dc_regs + DC_UNLOCK); + return -EINVAL; + } + +- dcfg = readl(par->df_regs + DF_DISPLAY_CFG); +- dcfg &= ~(DF_DCFG_DAC_BL_EN +- | DF_DCFG_HSYNC_EN | DF_DCFG_VSYNC_EN); +- if (!blank) +- dcfg |= DF_DCFG_DAC_BL_EN; +- if (hsync) +- dcfg |= DF_DCFG_HSYNC_EN; +- if (vsync) +- dcfg |= DF_DCFG_VSYNC_EN; +- writel(dcfg, par->df_regs + DF_DISPLAY_CFG); ++ /* Turn off the engine when we are in power down mode */ ++ if (blank_mode == FB_BLANK_POWERDOWN) { ++ val = readl(par->df_regs + DF_MISC) | DF_MISC_DAC_PWRDN; ++ writel(val, par->df_regs + DF_MISC); ++ ++ val = readl(par->dc_regs + DC_DISPLAY_CFG); ++ val &= ~DC_DCFG_TGEN; ++ writel(val, par->dc_regs + DC_DISPLAY_CFG); ++ ++ udelay(1000); ++ ++ val = readl(par->dc_regs + DC_GENERAL_CFG) & ~DC_GCFG_DFLE; ++ writel(val, par->dc_regs + DC_GENERAL_CFG); ++ ++ val = readl(par->df_regs + DF_FP_PM); ++ writel(val & ~DF_FP_PM_P, par->df_regs + DF_FP_PM); ++ } + ++ writel(0, par->dc_regs + DC_UNLOCK); ++ ++ lx_blank_mode = blank_mode; ++ return 0; ++} ++ ++static struct geoderegs saved_regs; ++ ++static void lx_save_regs(struct fb_info *info, struct geoderegs *regs) ++{ ++ struct lxfb_par *par = info->par; ++ int i; ++ u32 filt; ++ ++ /* Wait for the command buffer to empty */ ++ while(!(readl(par->gp_regs + 0x44) & (1 << 4))); ++ ++ /* Unlock the DC */ ++ writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK); ++ ++ rdmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel); ++ rdmsrl(MSR_LX_GLCP_DOTPLL, regs->msr.dotpll); ++ rdmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg); ++ rdmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare); ++ ++ writel(0x4758, par->dc_regs + 0x00); ++ ++ memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE); ++ memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE); ++ memcpy(regs->vp.b, par->df_regs, VP_REG_SIZE); ++ memcpy(regs->fp.b, par->df_regs + VP_FP_START, FP_REG_SIZE); ++ ++ /* Save the palette */ ++ writel(0, par->dc_regs + 0x70); + /* Power on/off flat panel */ ++ for(i = 0; i < DC_PAL_SIZE; i++) ++ regs->pal[i] = readl(par->dc_regs + 0x74); + +- if (par->output & OUTPUT_PANEL) { +- fp_pm = readl(par->df_regs + DF_FP_PM); +- if (blank_mode == FB_BLANK_POWERDOWN) +- fp_pm &= ~DF_FP_PM_P; +- else +- fp_pm |= DF_FP_PM_P; +- writel(fp_pm, par->df_regs + DF_FP_PM); ++ /* save the filter coefficients */ ++ ++ filt = readl(par->dc_regs + 0x94); ++ filt |= DC_IRQFILT_H_FILT_SEL; ++ ++ for(i = 0; i < DC_HFILT_SIZE; i++) { ++ writel((filt & 0xFFFFFF00) | i, par->dc_regs + 0x94); ++ regs->hcoeff[i << 1] = readl(par->dc_regs + 0x98); ++ regs->hcoeff[(i << 1) + 1] = readl(par->dc_regs + 0x9c); ++ } ++ ++ filt &= ~DC_IRQFILT_H_FILT_SEL; ++ ++ for(i = 0; i < DC_VFILT_SIZE; i++) { ++ writel((filt & 0xFFFFFF00) | i, par->dc_regs + 0x94); ++ regs->vcoeff[i] = readl(par->dc_regs + 0x98); + } + ++ /* Save the vg filter coefficients */ ++ for(i = 0; i < VP_COEFF_COUNT; i++) ++ regs->vp_coeff[i] = ++ readl(par->df_regs + 0x1000 + (i << 2)); ++ ++ /* Save the VP gamma */ ++ ++ writel(0, par->df_regs + 0x38); ++ ++ for(i = 0; i <= 0xFF; i++) ++ regs->gamma[i] = readl(par->df_regs + 0x40); ++} ++ ++static void lx_restore_dc(struct lxfb_par *par, struct geoderegs *regs) ++{ ++ u32 filt; ++ int i; ++ ++ /* Unlock the registers */ ++ writel(DC_UNLOCK_CODE, par->dc_regs + 0x00); ++ ++ /* Restore the framebuffer offset */ ++ writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84); ++ ++ /* Blank the configuration registers while we restore */ ++ writel(0, par->dc_regs + 0x04); ++ writel(0, par->dc_regs + 0x08); ++ ++ /* Restore the bulk of the registers */ ++ ++ writel(regs->dc.r.arb, par->dc_regs + 0x0C); ++ writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10); ++ writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14); ++ writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18); ++ ++ /* skip 0x1c */ ++ ++ writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20); ++ writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24); ++ writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28); ++ ++ writel(regs->dc.r.dctop, par->dc_regs + 0x2c); ++ writel(regs->dc.r.line_size, par->dc_regs + 0x30); ++ writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34); ++ writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38); ++ writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40); ++ writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44); ++ writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48); ++ writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50); ++ writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54); ++ writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58); ++ writel(regs->dc.r.fbactive, par->dc_regs + 0x5c); ++ writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60); ++ writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64); ++ ++ /* skip 0x68, 0x6c, 0x70, 0x74, 0x78, 0x7c */ ++ ++ writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80); ++ ++ /* 0x84 was written above */ ++ ++ writel(regs->dc.r.dv_ctl | 0x01, par->dc_regs + 0x88); ++ writel(regs->dc.r.gfx_scale, par->dc_regs + 0x90); ++ writel(regs->dc.r.irq_filt_ctl, par->dc_regs + 0x94); ++ ++ /* skip 0x98, 0x9c */ ++ ++ writel(regs->dc.r.vbi_event_ctl, par->dc_regs + 0xA0); ++ writel(regs->dc.r.vbi_odd_ctl, par->dc_regs + 0xA4); ++ writel(regs->dc.r.vbi_hor, par->dc_regs + 0xA8); ++ writel(regs->dc.r.vbi_ln_odd, par->dc_regs + 0xAC); ++ writel(regs->dc.r.vbi_ln_event, par->dc_regs + 0xB0); ++ writel(regs->dc.r.vbi_pitch, par->dc_regs + 0xB4); ++ writel(regs->dc.r.clr_key, par->dc_regs + 0xB8); ++ writel(regs->dc.r.clr_key_mask, par->dc_regs + 0xBC); ++ writel(regs->dc.r.clr_key_x, par->dc_regs + 0xC0); ++ writel(regs->dc.r.clr_key_y, par->dc_regs + 0xC4); ++ writel(regs->dc.r.irq, par->dc_regs + 0xC8); ++ writel(regs->dc.r.genlk_ctrl, par->dc_regs + 0xD4); ++ writel(regs->dc.r.vid_even_y_st_offset, par->dc_regs + 0xD8); ++ writel(regs->dc.r.vid_even_u_st_offset, par->dc_regs + 0xDC); ++ writel(regs->dc.r.vid_even_v_st_offset, par->dc_regs + 0xE0); ++ writel(regs->dc.r.v_active_even_timing, par->dc_regs + 0xE4); ++ writel(regs->dc.r.v_blank_even_timing, par->dc_regs + 0xE8); ++ writel(regs->dc.r.v_sync_even_timing, par->dc_regs + 0xEC); ++ ++ /* Restore the palette */ ++ writel(0, par->dc_regs + 0x70); ++ ++ for(i = 0; i < DC_PAL_SIZE; i++) ++ writel(regs->pal[i], par->dc_regs + 0x74); ++ ++ /* Restore the horizontal filter coefficients */ ++ filt = readl(par->dc_regs + 0x94); ++ filt |= DC_IRQFILT_H_FILT_SEL; ++ ++ for(i = 0; i < DC_HFILT_SIZE; i++) { ++ writel(((filt & 0xFFFFFF00) | i), par->dc_regs + 0x94); ++ writel(regs->hcoeff[i << 1], par->dc_regs + 0x98); ++ writel(regs->hcoeff[(i << 1) + 1], par->dc_regs + 0x9c); ++ } ++ ++ filt &= ~DC_IRQFILT_H_FILT_SEL; ++ ++ for(i = 0; i < DC_VFILT_SIZE; i++) { ++ writel(((filt & 0xFFFFFF00) | i), par->dc_regs + 0x94); ++ writel(regs->vcoeff[i], par->dc_regs + 0x98); ++ } ++ ++ /* Turn on the dotpll */ ++ lx_set_dotpll((u32) (regs->msr.dotpll >> 32)); ++ ++ /* Restore MSRs */ ++ wrmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare); ++ ++ /* Restore the configuration registers */ ++ ++ writel(regs->dc.r.dcfg, par->dc_regs + 0x08); ++ writel(regs->dc.r.gcfg, par->dc_regs + 0x04); ++ ++ /* Lock the DC again */ ++ writel(0, par->dc_regs + 0x00); ++} ++ ++static void lx_restore_vp(struct lxfb_par *par, struct geoderegs *regs) ++{ ++ u32 val; ++ int i; ++ ++ /* Restore MSRs */ ++ ++ wrmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg); ++ wrmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel); ++ ++ /* Restore the registers */ ++ ++ writel((u32) regs->vp.r.vx, par->df_regs + 0x10); ++ writel((u32) regs->vp.r.vy, par->df_regs + 0x18); ++ writel((u32) regs->vp.r.vs, par->df_regs + 0x20); ++ writel((u32) regs->vp.r.vck, par->df_regs + 0x28); ++ writel((u32) regs->vp.r.vcm, par->df_regs + 0x30); ++ /* skip 0x38 and 0x40 */ ++ writel((u32) regs->vp.r.slr, par->df_regs + 0x48); ++ writel((u32) regs->vp.r.misc, par->df_regs + 0x50); ++ /* skip 0x58 */ ++ writel((u32) regs->vp.r.vys, par->df_regs + 0x60); ++ writel((u32) regs->vp.r.vxs, par->df_regs + 0x68); ++ writel((u32) regs->vp.r.vde, par->df_regs + 0x98); ++ writel((u32) regs->vp.r.cck, par->df_regs + 0xA0); ++ writel((u32) regs->vp.r.ccm, par->df_regs + 0xA8); ++ writel((u32) regs->vp.r.cc1, par->df_regs + 0xB0); ++ writel((u32) regs->vp.r.cc2, par->df_regs + 0xB8); ++ writel((u32) regs->vp.r.a1x, par->df_regs + 0xC0); ++ writel((u32) regs->vp.r.a1y, par->df_regs + 0xC8); ++ writel((u32) regs->vp.r.a1c, par->df_regs + 0xD0); ++ writel((u32) regs->vp.r.a1t, par->df_regs + 0xD8); ++ writel((u32) regs->vp.r.a2x, par->df_regs + 0xE0); ++ writel((u32) regs->vp.r.a2y, par->df_regs + 0xE8); ++ writel((u32) regs->vp.r.a2c, par->df_regs + 0xF0); ++ writel((u32) regs->vp.r.a2t, par->df_regs + 0xF8); ++ writel((u32) regs->vp.r.a3x, par->df_regs + 0x100); ++ writel((u32) regs->vp.r.a3y, par->df_regs + 0x108); ++ writel((u32) regs->vp.r.a3c, par->df_regs + 0x110); ++ writel((u32) regs->vp.r.a3t, par->df_regs + 0x118); ++ writel((u32) regs->vp.r.vrr, par->df_regs + 0x120); ++ writel((u32) regs->vp.r.vye, par->df_regs + 0x138); ++ writel((u32) regs->vp.r.a1ye, par->df_regs + 0x140); ++ writel((u32) regs->vp.r.a2ye, par->df_regs + 0x148); ++ writel((u32) regs->vp.r.a3ye, par->df_regs + 0x150); ++ ++ /* Panel */ ++ ++ writel((u32) regs->fp.r.pt1, par->df_regs + 0x400); ++ writel((u32) regs->fp.r.pt2, par->df_regs + 0x408); ++ writel((u32) regs->fp.r.dfc, par->df_regs + 0x418); ++ ++ /* Restore panel power */ ++ ++ val = readl(par->df_regs + 0x410); ++ ++ if (regs->fp.r.pm & (1 << 24)) { ++ if (!(val & 0x09)) ++ writel(regs->fp.r.pm, par->df_regs + 0x410); ++ } ++ else { ++ if (!(val & 0x05)) ++ writel(regs->fp.r.pm, par->df_regs + 0x410); ++ } ++ ++ /* Restore the vp palette */ ++ ++ writel(0, par->df_regs + 0x38); ++ ++ for(i = 0; i <= 0xFF; i++) ++ writel((u32) regs->gamma[i], par->df_regs + 0x40); ++ ++ /* Restore filter coefficients */ ++ ++ for(i = 0; i < VP_COEFF_COUNT; i++) ++ writel(regs->vp_coeff[i], ++ par->df_regs + 0x1000 + (i << 2)); ++ ++ /* Restore the configuration registers */ ++ ++ writel((u32) regs->vp.r.dcfg, par->df_regs + 0x08); ++ writel((u32) regs->vp.r.vcfg, par->df_regs + 0x00); ++} ++ ++static void lx_restore_gp(struct lxfb_par *par, struct geoderegs *regs) ++{ ++ writel(regs->gp.r.dst_offset, par->gp_regs + 0x00); ++ writel(regs->gp.r.src_offset, par->gp_regs + 0x04); ++ writel(regs->gp.r.stride, par->gp_regs + 0x08); ++ writel(regs->gp.r.wid_height, par->gp_regs + 0x0C); ++ writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10); ++ writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14); ++ writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18); ++ writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C); ++ writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20); ++ writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24); ++ writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28); ++ writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C); ++ writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30); ++ writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34); ++ ++ /* Writing to these registers would cause a blt to happen */ ++ /* 0x38, 0x3c, 0x40 */ ++ ++ /* Status register (0x44) is read only */ ++ ++ writel(regs->gp.r.hst_src, par->gp_regs + 0x48); ++ writel(regs->gp.r.base_offset, par->gp_regs + 0x4c); ++ writel(regs->gp.r.cmd_top, par->gp_regs + 0x50); ++ writel(regs->gp.r.cmd_bot, par->gp_regs + 0x54); ++ writel(regs->gp.r.cmd_read, par->gp_regs + 0x58); ++ writel(regs->gp.r.cmd_write, par->gp_regs + 0x5C); ++ writel(regs->gp.r.ch3_offset, par->gp_regs + 0x60); ++ writel(regs->gp.r.ch3_mode_str, par->gp_regs + 0x64); ++ writel(regs->gp.r.ch3_width, par->gp_regs + 0x6C); ++ writel(regs->gp.r.ch3_hsrc, par->gp_regs + 0x70); ++ ++ writel(regs->gp.r.int_cntrl, par->gp_regs + 0x70); ++} ++ ++static void lx_restore_regs(struct fb_info *info, struct geoderegs *regs) ++{ ++ struct lxfb_par *par = info->par; ++ ++ lx_restore_gp(par, regs); ++ lx_restore_vp(par, regs); ++ lx_restore_dc(par, regs); ++} ++ ++static int lx_power_on = 1; ++ ++int lx_shutdown(struct fb_info *info) ++{ ++ if (lx_power_on == 0) ++ return 0; ++ ++ lx_save_regs(info, &saved_regs); ++ lx_graphics_disable(info); ++ ++ lx_power_on = 0; ++ return 0; ++} ++ ++int lx_powerup(struct fb_info *info) ++{ ++ if (lx_power_on == 1) ++ return 0; ++ ++ lx_restore_regs(info, &saved_regs); ++ ++ lx_power_on = 1; + return 0; + } +diff -purN linux_2.6.24_org/drivers/video/geode/Makefile linux_2.6.24_olpc/drivers/video/geode/Makefile +--- linux_2.6.24_org/drivers/video/geode/Makefile 2008-02-15 20:11:23.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/geode/Makefile 2008-02-15 18:58:41.000000000 +0000 +@@ -5,5 +5,5 @@ obj-$(CONFIG_FB_GEODE_GX) += gxfb.o + obj-$(CONFIG_FB_GEODE_LX) += lxfb.o + + gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o +-gxfb-objs := gxfb_core.o display_gx.o video_gx.o ++gxfb-objs := gxfb_core.o display_gx.o video_gx.o suspend_gx.o + lxfb-objs := lxfb_core.o lxfb_ops.o +diff -purN linux_2.6.24_org/drivers/video/geode/suspend_gx.c linux_2.6.24_olpc/drivers/video/geode/suspend_gx.c +--- linux_2.6.24_org/drivers/video/geode/suspend_gx.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/drivers/video/geode/suspend_gx.c 2008-02-15 18:58:41.000000000 +0000 +@@ -0,0 +1,272 @@ ++#include ++#include ++#include ++ ++#include "geodefb.h" ++#include "video_gx.h" ++ ++void gx_set_dotpll(struct fb_info *info, struct geoderegs *regs) ++{ ++ int timeout = 1000; ++ ++ u64 rstpll, dotpll; ++ ++ rdmsrl(MSR_GLCP_SYS_RSTPLL, rstpll); ++ rdmsrl(MSR_GLCP_DOTPLL, dotpll); ++ ++ dotpll &= 0x00000000ffffffffull; ++ dotpll |= regs->msr.dotpll & 0xffffffff00000000ull; ++ ++ dotpll |= MSR_GLCP_DOTPLL_DOTRESET; ++ dotpll &= ~MSR_GLCP_DOTPLL_BYPASS; ++ ++ wrmsrl(MSR_GLCP_DOTPLL, dotpll); ++ ++ rstpll |= (regs->msr.rstpll & ++ ( MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 | ++ MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 | ++ MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3)); ++ ++ wrmsrl(MSR_GLCP_SYS_RSTPLL, rstpll); ++ dotpll &= ~(MSR_GLCP_DOTPLL_DOTRESET); ++ wrmsrl(MSR_GLCP_DOTPLL, dotpll); ++ ++ do { ++ rdmsrl(MSR_GLCP_DOTPLL, dotpll); ++ } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK)); ++} ++ ++/* FIXME: Make sure nothing is read to clear */ ++ ++void gx_save_regs(struct fb_info *info, struct geoderegs *regs) ++{ ++ struct geodefb_par *par = info->par; ++ int i; ++ ++ /* Wait for the BLT engine to stop being busy */ ++ while(readl(par->gp_regs + 0x44) & 0x05); ++ ++ rdmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel); ++ rdmsrl(MSR_GLCP_DOTPLL, regs->msr.dotpll); ++ rdmsrl(MSR_GLCP_SYS_RSTPLL, regs->msr.rstpll); ++ ++ writel(0x4758, par->dc_regs + 0x00); ++ ++ memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE); ++ memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE); ++ memcpy(regs->vp.b, par->vid_regs, VP_REG_SIZE); ++ memcpy(regs->fp.b, par->vid_regs + 0x400, FP_REG_SIZE); ++ ++ /* Save the palettes */ ++ writel(0, par->dc_regs + 0x70); ++ ++ for(i = 0; i < DC_PAL_SIZE; i++) ++ regs->pal[i] = readl(par->dc_regs + 0x74); ++ ++ writel(0, par->vid_regs + 0x38); ++ ++ for(i = 0; i < 0xFF; i++) ++ regs->gamma[i] = readl(par->vid_regs + 0x40); ++} ++ ++void gx_restore_regs(struct fb_info *info, struct geoderegs *regs) ++{ ++ struct geodefb_par *par = info->par; ++ u32 val, i; ++ ++ /* DOTPLL */ ++ gx_set_dotpll(info, regs); ++ ++ /* GP */ ++ ++ writel(regs->gp.r.dst_offset, par->gp_regs + 0x00); ++ writel(regs->gp.r.src_offset, par->gp_regs + 0x04); ++ writel(regs->gp.r.stride, par->gp_regs + 0x08); ++ writel(regs->gp.r.wid_height, par->gp_regs + 0x0C); ++ writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10); ++ writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14); ++ writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18); ++ writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C); ++ writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20); ++ writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24); ++ writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28); ++ writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C); ++ writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30); ++ writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34); ++ ++ /* Don't write the raster / vector / blt mode regs */ ++ /* status register is read only */ ++ ++ writel(regs->gp.r.hst_src, par->gp_regs + 0x48); ++ writel(regs->gp.r.base_offset, par->gp_regs + 0x4c); ++ ++ /* DC */ ++ ++ /* Write the unlock value */ ++ writel(0x4758, par->dc_regs + 0x00); ++ ++ writel(0, par->dc_regs + 0x70); ++ ++ for(i = 0; i < DC_PAL_SIZE; i++) ++ writel(regs->pal[i], par->dc_regs + 0x74); ++ ++ /* Write the gcfg register without the enables */ ++ writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04); ++ ++ /* Write the vcfg register without the enables */ ++ writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08); ++ ++ /* Write the rest of the active registers */ ++ ++ writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10); ++ writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14); ++ writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18); ++ writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C); ++ writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20); ++ writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24); ++ writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28); ++ writel(regs->dc.r.line_size, par->dc_regs + 0x30); ++ writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34); ++ writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38); ++ writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40); ++ writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44); ++ writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48); ++ writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50); ++ writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54); ++ writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58); ++ writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60); ++ writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64); ++ writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68); ++ ++ /* Don't write the line_cnt or diag registers */ ++ ++ writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80); ++ writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84); ++ writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C); ++ ++ /* VP */ ++ ++ /* MSR */ ++ wrmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel); ++ ++ writel(0, par->vid_regs + 0x38); ++ ++ for(i = 0; i < 0xFF; i++) ++ writel((u32) regs->gamma[i], par->vid_regs + 0x40); ++ ++ /* Don't enable video yet */ ++ writel((u32) regs->vp.r.vcfg & ~0x01, par->vid_regs + 0x00); ++ ++ /* Don't enable the CRT yet */ ++ writel((u32) regs->vp.r.dcfg & ~0x0F, par->vid_regs + 0x08); ++ ++ /* Write the rest of the VP registers */ ++ ++ writel((u32) regs->vp.r.vx, par->vid_regs + 0x10); ++ writel((u32) regs->vp.r.vy, par->vid_regs + 0x18); ++ writel((u32) regs->vp.r.vs, par->vid_regs + 0x20); ++ writel((u32) regs->vp.r.vck, par->vid_regs + 0x28); ++ writel((u32) regs->vp.r.vcm, par->vid_regs + 0x30); ++ writel((u32) regs->vp.r.misc, par->vid_regs + 0x50); ++ writel((u32) regs->vp.r.ccs, par->vid_regs + 0x58); ++ writel((u32) regs->vp.r.vdc, par->vid_regs + 0x78); ++ writel((u32) regs->vp.r.vco, par->vid_regs + 0x80); ++ writel((u32) regs->vp.r.crc, par->vid_regs + 0x88); ++ writel((u32) regs->vp.r.vde, par->vid_regs + 0x98); ++ writel((u32) regs->vp.r.cck, par->vid_regs + 0xA0); ++ writel((u32) regs->vp.r.ccm, par->vid_regs + 0xA8); ++ writel((u32) regs->vp.r.cc1, par->vid_regs + 0xB0); ++ writel((u32) regs->vp.r.cc2, par->vid_regs + 0xB8); ++ writel((u32) regs->vp.r.a1x, par->vid_regs + 0xC0); ++ writel((u32) regs->vp.r.a1y, par->vid_regs + 0xC8); ++ writel((u32) regs->vp.r.a1c, par->vid_regs + 0xD0); ++ writel((u32) regs->vp.r.a1t, par->vid_regs + 0xD8); ++ writel((u32) regs->vp.r.a2x, par->vid_regs + 0xE0); ++ writel((u32) regs->vp.r.a2y, par->vid_regs + 0xE8); ++ writel((u32) regs->vp.r.a2c, par->vid_regs + 0xF0); ++ writel((u32) regs->vp.r.a2t, par->vid_regs + 0xF8); ++ writel((u32) regs->vp.r.a3x, par->vid_regs + 0x100); ++ writel((u32) regs->vp.r.a3y, par->vid_regs + 0x108); ++ writel((u32) regs->vp.r.a3c, par->vid_regs + 0x110); ++ writel((u32) regs->vp.r.a3t, par->vid_regs + 0x118); ++ writel((u32) regs->vp.r.vrr, par->vid_regs + 0x120); ++ ++ ++ /* FP registers */ ++ ++ writel((u32) regs->fp.r.pt1, par->vid_regs + 0x400); ++ writel((u32) regs->fp.r.pt2, par->vid_regs + 0x408); ++ ++ writel((u32) regs->fp.r.dfc, par->vid_regs + 0x418); ++ writel(regs->fp.r.blfsr, par->vid_regs + 0x420); ++ writel(regs->fp.r.rlfsr, par->vid_regs + 0x428); ++ writel(regs->fp.r.fmi, par->vid_regs + 0x430); ++ writel(regs->fp.r.fmd, par->vid_regs + 0x438); ++ writel(regs->fp.r.dca, par->vid_regs + 0x448); ++ writel(regs->fp.r.dmd, par->vid_regs + 0x450); ++ writel(regs->fp.r.crc, par->vid_regs + 0x458); ++ writel(regs->fp.r.fbb, par->vid_regs + 0x460); ++ ++ /* Final enables */ ++ ++ val = readl(par->vid_regs + 0x410); ++ ++ /* Control the panel */ ++ if (regs->fp.r.pm & (1 << 24)) { ++ ++ if (!(val & 0x09)) ++ writel(regs->fp.r.pm, par->vid_regs + 0x410); ++ } ++ else { ++ if (!(val & 0x05)) ++ writel(regs->fp.r.pm, par->vid_regs + 0x410); ++ } ++ ++ /* Turn everything on */ ++ ++ writel(regs->dc.r.gcfg, par->dc_regs + 0x04); ++ writel((u32) regs->vp.r.vcfg, par->vid_regs + 0x00); ++ writel((u32) regs->vp.r.dcfg, par->vid_regs + 0x08); ++ writel(regs->dc.r.dcfg, par->dc_regs + 0x08); ++} ++ ++ ++#ifdef DEBUG ++ ++void dump_regs(struct fb_info *info, int mode) { ++ ++ struct geodefb_par *par = info->par; ++ u32 val; ++ int i; ++ ++ if (mode == 0) { ++ for(i = 0; i < GP_REG_SIZE; i += 4) { ++ val = readl(par->gp_regs + i); ++ } ++ } ++ ++ if (mode == 1) { ++ writel(0x4758, par->dc_regs + 0x00); ++ ++ for(i = 0; i < DC_REG_SIZE; i += 4) { ++ val = readl(par->dc_regs + i); ++ printk("DC%x: %x\n", i, val); ++ } ++ } ++ ++ if (mode == 2) { ++ for(i = 0; i < VP_REG_SIZE; i += 8) { ++ val = readl(par->vid_regs + i); ++ printk("VP%x: %x\n", i, val); ++ } ++ } ++ ++ if (mode == 3) { ++ for(i = 0; i < FP_REG_SIZE; i += 8) { ++ val = readl(par->vid_regs + 0x400 + i); ++ printk("FP%x: %x\n", i, val); ++ } ++ } ++} ++ ++#endif +diff -purN linux_2.6.24_org/drivers/video/geode/video_gx.c linux_2.6.24_olpc/drivers/video/geode/video_gx.c +--- linux_2.6.24_org/drivers/video/geode/video_gx.c 2008-02-15 20:11:23.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/geode/video_gx.c 2008-02-15 18:58:41.000000000 +0000 +@@ -16,10 +16,14 @@ + #include + #include + #include ++#include + + #include "geodefb.h" + #include "video_gx.h" ++#include "display_gx.h" + ++/* This structure is used to store the saved registers during suspend */ ++static struct geoderegs gx_saved_regs; + + /* + * Tables of register settings for various DOTCLKs. +@@ -58,7 +62,7 @@ static const struct gx_pll_entry gx_pll_ + { 13888, POSTDIV3, 0x000007E1 }, /* 72.0000 */ + { 13426, PREMULT2, 0x00000F4A }, /* 74.4810 */ + { 13333, 0, 0x00000052 }, /* 75.0000 */ +- { 12698, 0, 0x00000056 }, /* 78.7500 */ ++ { 12698, 0, 0x00000056 }, /* 78.7500 */ + { 12500, POSTDIV3|PREMULT2, 0x00000709 }, /* 80.0000 */ + { 11135, PREMULT2, 0x00000262 }, /* 89.8000 */ + { 10582, 0, 0x000002D2 }, /* 94.5000 */ +@@ -117,8 +121,9 @@ static const struct gx_pll_entry gx_pll_ + { 4357, 0, 0x0000057D }, /* 229.5000 */ + }; + +-static void gx_set_dclk_frequency(struct fb_info *info) ++void gx_set_dclk_frequency(struct fb_info *info) + { ++ struct geodefb_par *par = info->par; + const struct gx_pll_entry *pll_table; + int pll_table_len; + int i, best_i; +@@ -173,115 +178,169 @@ static void gx_set_dclk_frequency(struct + do { + rdmsrl(MSR_GLCP_DOTPLL, dotpll); + } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK)); ++ ++ par->curdclk = pll_table[best_i].dotpll_value; + } + +-static void +-gx_configure_tft(struct fb_info *info) ++/* Find out the current clock - we will use this information to avoid ++ re-programming it if we don't need to */ ++ ++unsigned int gx_get_dclk(struct fb_info *info) + { +- struct geodefb_par *par = info->par; +- unsigned long val; +- unsigned long fp; ++ const struct gx_pll_entry *pll_table; ++ int pll_table_len; ++ u64 dotpll; ++ int i; + +- /* Set up the DF pad select MSR */ ++ if (cpu_data(0).x86_mask == 1) { ++ pll_table = gx_pll_table_14MHz; ++ pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz); ++ } else { ++ pll_table = gx_pll_table_48MHz; ++ pll_table_len = ARRAY_SIZE(gx_pll_table_48MHz); ++ } + +- rdmsrl(GX_VP_MSR_PAD_SELECT, val); +- val &= ~GX_VP_PAD_SELECT_MASK; +- val |= GX_VP_PAD_SELECT_TFT; +- wrmsrl(GX_VP_MSR_PAD_SELECT, val); ++ rdmsrl(MSR_GLCP_DOTPLL, dotpll); + +- /* Turn off the panel */ ++ for(i = 0; i < pll_table_len; i++) { ++ if (pll_table[i].dotpll_value == (u32) (dotpll >> 32)) ++ break; ++ } ++ ++ return (i == pll_table_len) ? 0 : pll_table[i].pixclock; ++} + +- fp = readl(par->vid_regs + GX_FP_PM); +- fp &= ~GX_FP_PM_P; +- writel(fp, par->vid_regs + GX_FP_PM); + +- /* Set timing 1 */ ++#define CMP(val, mask, res) (((val) & (mask)) == (res)) + +- fp = readl(par->vid_regs + GX_FP_PT1); +- fp &= GX_FP_PT1_VSIZE_MASK; +- fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT; +- writel(fp, par->vid_regs + GX_FP_PT1); ++static void ++gx_configure_tft(struct fb_info *info) { + +- /* Timing 2 */ +- /* Set bits that are always on for TFT */ ++ struct geodefb_par *par = info->par; ++ u32 val, fp = 0, fp1, fp2, sync = 0; + +- fp = 0x0F100000; ++ /* Set up the DF pad select MSR */ + +- /* Add sync polarity */ ++ rdmsrl(GX_VP_MSR_PAD_SELECT, val); ++ ++ if ((val & GX_VP_PAD_SELECT_MASK) != GX_VP_PAD_SELECT_TFT) { ++ val &= ~GX_VP_PAD_SELECT_MASK; ++ val |= GX_VP_PAD_SELECT_TFT; ++ wrmsrl(GX_VP_MSR_PAD_SELECT, val); ++ } + + if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) +- fp |= GX_FP_PT2_VSP; ++ sync |= GX_FP_PT2_VSP; + + if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) +- fp |= GX_FP_PT2_HSP; ++ sync |= GX_FP_PT2_HSP; + +- writel(fp, par->vid_regs + GX_FP_PT2); ++ /* We only need to turn off the panel if something changed */ + +- /* Set the dither control */ +- writel(0x70, par->vid_regs + GX_FP_DFC); ++ fp1 = readl(par->vid_regs + GX_FP_PT1); ++ fp2 = readl(par->vid_regs + GX_FP_PT2); ++ ++ if (!CMP(fp1, GX_FP_PT1_VSIZE_MASK, info->var.yres << GX_FP_PT1_VSIZE_SHIFT) || ++ (fp2 != (0x0F100000 | sync))) { ++ ++ /* Turn off the panel */ ++ ++#ifdef NOTUSED ++ /* Do we really need to turn off the panel? */ ++ /* Possibly - we have a glitch somewhere */ + +- /* Enable the FP data and power (in case the BIOS didn't) */ ++ fp = readl(par->vid_regs + GX_FP_PM); ++ fp &= ~GX_FP_PM_P; ++ writel(fp, par->vid_regs + GX_FP_PM); ++#endif + +- fp = readl(par->vid_regs + GX_DCFG); +- fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN; +- writel(fp, par->vid_regs + GX_DCFG); ++ /* Timing 1 */ ++ fp1 &= GX_FP_PT1_VSIZE_MASK; ++ fp1 |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT; ++ writel(fp, par->vid_regs + GX_FP_PT1); + +- /* Unblank the panel */ ++ /* Timing 2 */ ++ writel(0x0F100000 | sync, par->vid_regs + GX_FP_PT2); ++ } ++ ++ /* Set the dither control */ ++ if (readl(par->vid_regs + GX_FP_DFC) != 0x70) { ++ writel(0x70, par->vid_regs + GX_FP_DFC); ++ } ++ ++ /* Turn on the panel */ + + fp = readl(par->vid_regs + GX_FP_PM); +- fp |= GX_FP_PM_P; +- writel(fp, par->vid_regs + GX_FP_PM); ++ ++ if (!(fp & 0x09)) ++ writel(fp | GX_FP_PM_P, par->vid_regs + GX_FP_PM); + } + ++#define DCFG_DEFAULT_VAL GX_DCFG_CRT_SYNC_SKW_DFLT | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN | \ ++GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN ++ + static void gx_configure_display(struct fb_info *info) + { + struct geodefb_par *par = info->par; +- u32 dcfg, misc; ++ u32 dcfg, misc, sync = 0; + + /* Set up the MISC register */ +- + misc = readl(par->vid_regs + GX_MISC); + +- /* Power up the DAC */ +- misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); ++ /* We leave gamma enabled if it was already enabled. ++ Although the hardware enables it without setting ++ up the gamma table, the BIOS or bootloader ought ++ to have either disabled it or loaded a table by now */ + +- /* Disable gamma correction */ +- misc |= GX_MISC_GAM_EN; + +- writel(misc, par->vid_regs + GX_MISC); + +- /* Write the display configuration */ +- dcfg = readl(par->vid_regs + GX_DCFG); ++ if (par->enable_crt) { ++ /* Power up the CRT DACs */ ++ if (misc & ( GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN)) { ++ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); ++ writel(misc, par->vid_regs + GX_MISC); ++ } + +- /* Disable hsync and vsync */ +- dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); +- writel(dcfg, par->vid_regs + GX_DCFG); ++ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) ++ sync |= GX_DCFG_CRT_HSYNC_POL; + +- /* Clear bits from existing mode. */ +- dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK +- | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL +- | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); ++ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) ++ sync |= GX_DCFG_CRT_VSYNC_POL; ++ } ++ else { ++ /* Turn off the CRT DACs in FP mode - we don't need them */ ++ if ((misc & (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN))) { ++ misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); ++ writel(misc, par->vid_regs + GX_MISC); ++ } ++ } + +- /* Set default sync skew. */ +- dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT; ++ /* Write the display configuration */ ++ dcfg = readl(par->vid_regs + GX_DCFG); + +- /* Enable hsync and vsync. */ +- dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN; ++ if (!CMP(dcfg, DCFG_DEFAULT_VAL | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL, ++ DCFG_DEFAULT_VAL | sync)) { + +- /* Sync polarities. */ +- if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) +- dcfg |= GX_DCFG_CRT_HSYNC_POL; +- if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) +- dcfg |= GX_DCFG_CRT_VSYNC_POL; ++ /* Disable hsync and vsync */ ++ dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); ++ writel(dcfg, par->vid_regs + GX_DCFG); + +- /* Enable the display logic */ +- /* Set up the DACS to blank normally */ ++ /* Clear bits from existing mode. */ ++ dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK ++ | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL ++ | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); + +- dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN; ++ /* Set default sync skew. */ ++ dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT; + +- /* Enable the external DAC VREF? */ ++ /* Enable hsync and vsync. */ ++ dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN; + +- writel(dcfg, par->vid_regs + GX_DCFG); ++ /* Enable the display logic */ ++ dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN; ++ ++ writel(dcfg, par->vid_regs + GX_DCFG); ++ } + + /* Set up the flat panel (if it is enabled) */ + +@@ -289,6 +348,100 @@ static void gx_configure_display(struct + gx_configure_tft(info); + } + ++int gxfb_powerdown(struct fb_info *info) ++{ ++ struct geodefb_par *par = info->par; ++ ++ /* We're already suspended */ ++ ++ if (par->state != FB_POWER_STATE_ON) ++ return 0; ++ ++ /* Save the registers */ ++ gx_save_regs(info, &gx_saved_regs); ++ ++ /* Shut down the engine */ ++ ++ writel(gx_saved_regs.vp.r.vcfg & ~0x01, par->vid_regs + GX_VCFG); ++ writel(gx_saved_regs.vp.r.dcfg & ~0x0F, par->vid_regs + GX_DCFG); ++ ++ /* Turn off the flat panel unless we are attached to a DCON */ ++ if (!olpc_has_dcon()) ++ writel(gx_saved_regs.fp.r.pm & ~GX_FP_PM_P, par->vid_regs + GX_FP_PM); ++ ++ writel(0x4758, par->dc_regs + DC_UNLOCK); ++ ++ writel(gx_saved_regs.dc.r.gcfg & ~0x0F, ++ par->dc_regs + DC_GENERAL_CFG); ++ ++ writel(gx_saved_regs.dc.r.dcfg & ~0x19, ++ par->dc_regs + DC_DISPLAY_CFG); ++ ++ par->state = FB_POWER_STATE_SUSPEND; ++ ++ return 0; ++} ++ ++int gxfb_powerup(struct fb_info *info) ++{ ++ struct geodefb_par *par = info->par; ++ u32 val; ++ ++ if (par->state == FB_POWER_STATE_SUSPEND) { ++ ++ writel(gx_saved_regs.dc.r.dcfg, ++ par->dc_regs + DC_DISPLAY_CFG); ++ ++ writel(gx_saved_regs.vp.r.vcfg, par->vid_regs + GX_VCFG); ++ writel(gx_saved_regs.vp.r.dcfg, par->vid_regs + GX_DCFG); ++ ++ val = readl(par->vid_regs + GX_FP_PM); ++ ++ /* power up the panel if it needs it; we don't always power it down */ ++ if (!(val & 0x09)) { ++ writel(gx_saved_regs.fp.r.pm, par->vid_regs + GX_FP_PM); ++ mdelay(64); ++ } ++ } ++ ++ /* If the panel is currently on its way up, then wait up to 100ms ++ for it */ ++ ++ if (readl(par->vid_regs + GX_FP_PM) & 0x08) { ++ int i; ++ ++ for(i = 0; i < 10; i++) { ++ if (readl(par->vid_regs + GX_FP_PM) & 0x01) ++ break; ++ ++ mdelay(10); ++ } ++ ++ if (i == 10) ++ printk(KERN_ERR "gxfb: Panel power up timed out\n"); ++ } ++ ++ if (par->state == FB_POWER_STATE_ON) ++ return 0; ++ ++ switch(par->state) { ++ case FB_POWER_STATE_OFF: ++ gx_restore_regs(info, &gx_saved_regs); ++ break; ++ ++ case FB_POWER_STATE_SUSPEND: ++ /* Do this because it will turn on the FIFO which will ++ start the line count */ ++ writel(gx_saved_regs.dc.r.gcfg, ++ par->dc_regs + DC_GENERAL_CFG); ++ writel(0x0, par->dc_regs + DC_UNLOCK); ++ break; ++ } ++ ++ par->state = FB_POWER_STATE_ON; ++ return 0; ++} ++ + static int gx_blank_display(struct fb_info *info, int blank_mode) + { + struct geodefb_par *par = info->par; +@@ -315,6 +468,7 @@ static int gx_blank_display(struct fb_in + default: + return -EINVAL; + } ++ + dcfg = readl(par->vid_regs + GX_DCFG); + dcfg &= ~(GX_DCFG_DAC_BL_EN + | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN); +@@ -326,7 +480,7 @@ static int gx_blank_display(struct fb_in + dcfg |= GX_DCFG_VSYNC_EN; + writel(dcfg, par->vid_regs + GX_DCFG); + +- /* Power on/off flat panel. */ ++ /* Power on/off flat panel */ + + if (par->enable_crt == 0) { + fp_pm = readl(par->vid_regs + GX_FP_PM); +@@ -340,8 +494,37 @@ static int gx_blank_display(struct fb_in + return 0; + } + ++extern struct fb_info *gxfb_info; ++ ++/* This function controls the flatpanel power sequencing - this is used ++ by the OLPC power management engine to enable the FP sequencing much ++ earlier in the resume process ++*/ ++ ++void gxfb_flatpanel_control(int state) ++{ ++ struct geodefb_par *par = gxfb_info->par; ++ u32 val, fp = readl(par->vid_regs + GX_FP_PM); ++ val = fp; ++ ++ /* Turn on the panel if it isn't aleady */ ++ ++ if (state) { ++ if (!(val & 0x01)) ++ val |= GX_FP_PM_P; ++ } ++ else { ++ if (!(val & 0x02)) ++ val &= ~GX_FP_PM_P; ++ } ++ ++ if (val != fp) ++ writel(val, par->vid_regs + GX_FP_PM); ++} ++ + struct geode_vid_ops gx_vid_ops = { + .set_dclk = gx_set_dclk_frequency, ++ .get_dclk = gx_get_dclk, + .configure_display = gx_configure_display, + .blank_display = gx_blank_display, + }; +diff -purN linux_2.6.24_org/drivers/video/geode/video_gx.h linux_2.6.24_olpc/drivers/video/geode/video_gx.h +--- linux_2.6.24_org/drivers/video/geode/video_gx.h 2008-02-15 20:11:23.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/geode/video_gx.h 2008-02-15 18:58:41.000000000 +0000 +@@ -11,6 +11,8 @@ + #ifndef __VIDEO_GX_H__ + #define __VIDEO_GX_H__ + ++#include "geode_regs.h" ++ + extern struct geode_vid_ops gx_vid_ops; + + /* GX Flatpanel control MSR */ +@@ -20,6 +22,8 @@ extern struct geode_vid_ops gx_vid_ops; + + /* Geode GX video processor registers */ + ++#define GX_VCFG 0x0000 ++ + #define GX_DCFG 0x0008 + # define GX_DCFG_CRT_EN 0x00000001 + # define GX_DCFG_HSYNC_EN 0x00000002 +@@ -42,6 +46,14 @@ extern struct geode_vid_ops gx_vid_ops; + #define GX_MISC_DAC_PWRDN 0x00000400 + #define GX_MISC_A_PWRDN 0x00000800 + ++/* Gamma correction RAM - address and data registers */ ++ ++#define GX_GAR 0x038 ++#define GX_GDR 0x040 ++ ++#define GXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */ ++#define GXFB_GAMMA_SIZE (GXFB_GAMMA_DWORDS * sizeof(unsigned int)) ++ + /* Geode GX flat panel display control registers */ + + #define GX_FP_PT1 0x0400 +@@ -69,4 +81,13 @@ extern struct geode_vid_ops gx_vid_ops; + # define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull) + # define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull) + ++int gxfb_powerdown(struct fb_info *info); ++int gxfb_powerup(struct fb_info *info); ++ ++void gx_set_dclk_frequency(struct fb_info *info); ++unsigned int gx_get_dclk(struct fb_info *info); ++ ++void gx_save_regs(struct fb_info *info, struct geoderegs *regs); ++void gx_restore_regs(struct fb_info *info, struct geoderegs *regs); ++ + #endif /* !__VIDEO_GX_H__ */ +diff -purN linux_2.6.24_org/drivers/video/Kconfig linux_2.6.24_olpc/drivers/video/Kconfig +--- linux_2.6.24_org/drivers/video/Kconfig 2008-02-15 20:11:22.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/Kconfig 2008-02-15 18:58:36.000000000 +0000 +@@ -1869,6 +1869,15 @@ config FB_PS3_DEFAULT_SIZE_M + The default value can be overridden on the kernel command line + using the "ps3fb" option (e.g. "ps3fb=9M"); + ++config FB_OLPC_DCON ++ tristate "One Laptop Per Child Display CONtroller support" ++ depends on OLPC ++ select I2C ++ ---help--- ++ Add support for the OLPC DCON controller. This controller is only ++ available on OLPC platforms. Unless you have one of these ++ platforms, you will want to say 'N'. ++ + config FB_XILINX + tristate "Xilinx frame buffer support" + depends on FB && XILINX_VIRTEX +diff -purN linux_2.6.24_org/drivers/video/Makefile linux_2.6.24_olpc/drivers/video/Makefile +--- linux_2.6.24_org/drivers/video/Makefile 2008-02-15 20:11:22.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/Makefile 2008-02-15 18:58:36.000000000 +0000 +@@ -111,6 +111,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx + obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o + obj-$(CONFIG_FB_PS3) += ps3fb.o + obj-$(CONFIG_FB_SM501) += sm501fb.o ++obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon.o + obj-$(CONFIG_FB_XILINX) += xilinxfb.o + obj-$(CONFIG_FB_OMAP) += omap/ + +diff -purN linux_2.6.24_org/drivers/video/modedb.c linux_2.6.24_olpc/drivers/video/modedb.c +--- linux_2.6.24_org/drivers/video/modedb.c 2008-02-15 20:11:23.000000000 +0000 ++++ linux_2.6.24_olpc/drivers/video/modedb.c 2008-02-15 18:58:41.000000000 +0000 +@@ -33,6 +33,8 @@ const char *fb_mode_option; + * Standard video mode definitions (taken from XFree86) + */ + ++#define DEFAULT_MODEDB_INDEX 0 ++ + static const struct fb_videomode modedb[] = { + { + /* 640x400 @ 70 Hz, 31.5 kHz hsync */ +@@ -508,7 +510,8 @@ int fb_find_mode(struct fb_var_screeninf + } + + if (!default_mode) +- default_mode = &db[0]; ++ default_mode = (db == modedb) ? ++ &modedb[DEFAULT_MODEDB_INDEX] : &db[0]; + + if (!default_bpp) + default_bpp = 8; +diff -purN linux_2.6.24_org/drivers/video/olpc_dcon.c linux_2.6.24_olpc/drivers/video/olpc_dcon.c +--- linux_2.6.24_org/drivers/video/olpc_dcon.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/drivers/video/olpc_dcon.c 2008-02-15 18:58:42.000000000 +0000 +@@ -0,0 +1,946 @@ ++/* ++ * Mainly by David Woodhouse, somewhat modified by Jordan Crouse ++ * ++ * Copyright © 2006-2007 Red Hat, Inc. ++ * Copyright © 2006-2007 Advanced Micro Devices, Inc. ++ * ++ * This program is free software. You can redistribute it and/or ++ * modify it under the terms of version 2 of the GNU General Public ++ * License as published by the Free Software Foundation. ++ */ ++ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "olpc_dcon.h" ++ ++/* Module definitions */ ++ ++static int resumeline = 898; ++module_param(resumeline, int, 0444); ++ ++static int noinit; ++module_param(noinit, int, 0444); ++ ++/* Default off since it doesn't work on DCON ASIC in B-test OLPC board */ ++static int useaa = 1; ++module_param(useaa, int, 0444); ++ ++/* I2C structures */ ++ ++static struct i2c_driver dcon_driver; ++static struct i2c_client *dcon_client; ++ ++/* Platform devices */ ++static struct platform_device *dcon_device; ++ ++/* Backlight device */ ++static struct backlight_device *dcon_bl_dev; ++ ++/* Base address of the GPIO registers */ ++static unsigned long gpio_base; ++ ++static struct fb_info *fbinfo; ++ ++/* Current source, initialized at probe time */ ++static int dcon_source; ++ ++/* Desired source */ ++static int dcon_pending; ++ ++/* Current output type */ ++static int dcon_output = DCON_OUTPUT_COLOR; ++ ++/* Current sleep status (not yet implemented) */ ++static int dcon_sleep_val = DCON_ACTIVE; ++ ++/* Shadow register for the DCON_REG_MODE register */ ++static unsigned short dcon_disp_mode; ++ ++/* Variables used during switches */ ++static int dcon_switched; ++ ++static DECLARE_WAIT_QUEUE_HEAD(dcon_wait_queue); ++ ++static unsigned short normal_i2c[] = { 0x0D, I2C_CLIENT_END }; ++I2C_CLIENT_INSMOD; ++ ++#define dcon_write(reg,val) i2c_smbus_write_word_data(dcon_client,reg,val) ++#define dcon_read(reg) i2c_smbus_read_word_data(dcon_client,reg) ++ ++/* The current backlight value - this saves us some smbus traffic */ ++static int bl_val = -1; ++ ++/* ===== API functions - these are called by a variety of users ==== */ ++ ++static int dcon_request_irq(void); ++ ++static int dcon_hw_init(struct i2c_client *client, int is_init) ++{ ++ uint16_t ver; ++ int rc = 0; ++ ++ ver = i2c_smbus_read_word_data(client, DCON_REG_ID); ++ if ((ver >> 8) != 0xDC) { ++ printk(KERN_ERR "olpc-dcon: DCON ID not 0xDCxx: 0x%04x " ++ "instead.\n", ver); ++ rc = -ENXIO; ++ goto err; ++ } ++ ++ if (is_init) { ++ printk(KERN_INFO "olpc-dcon: Discovered DCON version %x\n", ++ ver & 0xFF); ++ if ((rc = dcon_request_irq())) { ++ printk(KERN_ERR "olpc-dcon: Unable to grab IRQ.\n"); ++ goto err; ++ } ++ } ++ ++ if (ver < 0xdc02 && !noinit) { ++ /* Initialize the DCON registers */ ++ ++ /* Start with work-arounds for DCON ASIC */ ++ i2c_smbus_write_word_data(client, 0x4b, 0x00cc); ++ i2c_smbus_write_word_data(client, 0x4b, 0x00cc); ++ i2c_smbus_write_word_data(client, 0x4b, 0x00cc); ++ i2c_smbus_write_word_data(client, 0x0b, 0x007a); ++ i2c_smbus_write_word_data(client, 0x36, 0x025c); ++ i2c_smbus_write_word_data(client, 0x37, 0x025e); ++ ++ /* Initialise SDRAM */ ++ ++ i2c_smbus_write_word_data(client, 0x3b, 0x002b); ++ i2c_smbus_write_word_data(client, 0x41, 0x0101); ++ i2c_smbus_write_word_data(client, 0x42, 0x0101); ++ } ++ else if (!noinit) { ++ /* SDRAM setup/hold time */ ++ i2c_smbus_write_word_data(client, 0x3a, 0xc040); ++ i2c_smbus_write_word_data(client, 0x41, 0x0000); ++ i2c_smbus_write_word_data(client, 0x41, 0x0101); ++ i2c_smbus_write_word_data(client, 0x42, 0x0101); ++ } ++ ++ /* Colour swizzle, AA, no passthrough, backlight */ ++ if (is_init) { ++ dcon_disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE | MODE_CSWIZZLE; ++ if (useaa) ++ dcon_disp_mode |= MODE_COL_AA; ++ } ++ i2c_smbus_write_word_data(client, DCON_REG_MODE, dcon_disp_mode); ++ ++ ++ /* Set the scanline to interrupt on during resume */ ++ ++ i2c_smbus_write_word_data(client, DCON_REG_SCAN_INT, resumeline); ++ ++err: ++ return rc; ++} ++ ++/* ++ * The smbus doesn't always come back due to what is believed to be ++ * hardware (power rail) bugs. For older models where this is known to ++ * occur, our solution is to attempt to wait for the bus to stabilize; ++ * if it doesn't happen, cut power to the dcon, repower it, and wait ++ * for the bus to stabilize. Rinse, repeat until we have a working ++ * smbus. For newer models, we simply BUG(); we want to know if this ++ * still happens despite the power fixes that have been made! ++ */ ++static int dcon_bus_stabilize(struct i2c_client *client, int is_powered_down) ++{ ++ unsigned long timeout; ++ int x; ++ ++power_up: ++ if (is_powered_down) { ++ x = 1; ++ if ((x = olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0))) { ++ printk(KERN_WARNING "olpc-dcon: unable to force dcon " ++ "to power up: %d!\n", x); ++ return x; ++ } ++ msleep(10); /* we'll be conservative */ ++ } ++ ++ /* ++ * According to HiMax, when powering the DCON up we should hold ++ * SMB_DATA high for 8 SMB_CLK cycles. This will force the DCON ++ * state machine to reset to a (sane) initial state. Mitch Bradley ++ * did some testing and discovered that holding for 16 SMB_CLK cycles ++ * worked a lot more reliably, so that's what we do here. ++ * ++ * According to the cs5536 spec, to set GPIO14 to SMB_CLK we must ++ * simultaneously set AUX1 IN/OUT to GPIO14; ditto for SMB_DATA and ++ * GPIO15. ++ */ ++ geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_VAL); ++ geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_ENABLE); ++ geode_gpio_clear(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1); ++ geode_gpio_clear(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX2); ++ geode_gpio_clear(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1); ++ ++ for (x = 0; x < 16; x++) { ++ udelay(5); ++ geode_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); ++ udelay(5); ++ geode_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); ++ } ++ udelay(5); ++ geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1); ++ geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1); ++ ++ for (x = -1, timeout = 50; timeout && x < 0; timeout--) { ++ msleep(1); ++ x = dcon_read(DCON_REG_ID); ++ } ++ if (x < 0) { ++ printk(KERN_ERR "olpc-dcon: unable to stabilize dcon's " ++ "smbus, reasserting power and praying.\n"); ++ BUG_ON(olpc_board_at_least(olpc_board(0xc2))); ++ x = 0; ++ olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0); ++ msleep(100); ++ is_powered_down = 1; ++ goto power_up; /* argh, stupid hardware.. */ ++ } ++ ++ if (is_powered_down) ++ return dcon_hw_init(client, 0); ++ return 0; ++} ++ ++ ++/* Backlight notes - turning off the backlight enable bit in the DCON ++ * doesn't save us any power over just pushing the BL to zero, so we ++ * don't use that bit in this code. ++ */ ++ ++static int dcon_get_backlight(void) ++{ ++ if (dcon_client == NULL) ++ return 0; ++ ++ if (bl_val == -1) ++ bl_val = dcon_read(DCON_REG_BRIGHT) & 0x0F; ++ ++ return bl_val; ++} ++ ++static void dcon_set_backlight(int level) ++{ ++ if (dcon_client == NULL) ++ return; ++ ++ if (bl_val == (level & 0x0F)) ++ return; ++ ++ bl_val = level & 0x0F; ++ dcon_write(DCON_REG_BRIGHT, bl_val); ++ ++ /* Purposely turn off the backlight when we go to level 0 */ ++ ++ if (bl_val == 0) { ++ dcon_disp_mode &= ~MODE_BL_ENABLE; ++ dcon_write(DCON_REG_MODE, dcon_disp_mode); ++ } ++ else if (!(dcon_disp_mode & MODE_BL_ENABLE)) { ++ dcon_disp_mode |= MODE_BL_ENABLE; ++ dcon_write(DCON_REG_MODE, dcon_disp_mode); ++ } ++} ++ ++/* Set the output type to either color or mono */ ++ ++static int dcon_set_output(int arg) ++{ ++ if (dcon_output == arg) ++ return 0; ++ ++ dcon_output = arg; ++ ++ if (arg == DCON_OUTPUT_MONO) { ++ dcon_disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA); ++ dcon_disp_mode |= MODE_MONO_LUMA; ++ } ++ else { ++ dcon_disp_mode &= ~(MODE_MONO_LUMA); ++ dcon_disp_mode |= MODE_CSWIZZLE; ++ if (useaa) ++ dcon_disp_mode |= MODE_COL_AA; ++ } ++ ++ dcon_write(DCON_REG_MODE, dcon_disp_mode); ++ return 0; ++} ++ ++/* For now, this will be really stupid - we need to address how ++ * DCONLOAD works in a sleep and account for it accordingly ++ */ ++ ++static void dcon_sleep(int state) ++{ ++ int x; ++ ++ /* Turn off the backlight and put the DCON to sleep */ ++ ++ if (state == dcon_sleep_val) ++ return; ++ ++ if (!olpc_board_at_least(olpc_board(0xc2))) ++ return; ++ ++ if (state == DCON_SLEEP) { ++ x = 0; ++ if ((x = olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0))) ++ printk(KERN_WARNING "olpc-dcon: unable to force dcon " ++ "to power down: %d!\n", x); ++ else ++ dcon_sleep_val = state; ++ } ++ else { ++ /* Only re-enable the backlight if the backlight value is set */ ++ if (bl_val != 0) ++ dcon_disp_mode |= MODE_BL_ENABLE; ++ ++ if ((x=dcon_bus_stabilize(dcon_client, 1))) ++ printk(KERN_WARNING "olpc-dcon: unable to reinit dcon" ++ " hardware: %d!\n", x); ++ else ++ dcon_sleep_val = state; ++ } ++ ++ /* We should turn off some stuff in the framebuffer - but what? */ ++} ++ ++/* Set the source of the display (CPU or DCON) */ ++ ++static void dcon_source_switch(struct work_struct *work) ++{ ++ DECLARE_WAITQUEUE(wait, current); ++ int source = dcon_pending; ++ ++ if (dcon_source == source) ++ return; ++ ++ dcon_switched = 0; ++ ++ switch (source) { ++ case DCON_SOURCE_CPU: ++ ++ /* Enable the scanline interrupt bit */ ++ if (dcon_write(DCON_REG_MODE, dcon_disp_mode | MODE_SCAN_INT)) ++ printk(KERN_ERR "olpc-dcon: couldn't enable scanline interrupt!\n"); ++ else { ++ /* Wait up to one second for the scanline interrupt */ ++ wait_event_timeout(dcon_wait_queue, dcon_switched == 1, HZ); ++ } ++ ++ if (!dcon_switched) ++ printk(KERN_ERR "olpc-dcon: Timeout entering CPU mode; expect a screen glitch.\n"); ++ ++ /* ++ * Ideally we'd like to disable interrupts here so that the ++ * fb unblanking and DCON turn on happen at a known time value; ++ * however, we can't do that right now with fb_blank ++ * messing with semaphores. ++ * ++ * For now, we just hope.. ++ */ ++ acquire_console_sem(); ++ if (fb_blank(fbinfo, FB_BLANK_UNBLANK)) { ++ release_console_sem(); ++ printk(KERN_ERR "olpc-dcon: Failed to enter CPU mode\n"); ++ dcon_pending = DCON_SOURCE_DCON; ++ return; ++ } ++ release_console_sem(); ++ ++ /* And turn off the DCON */ ++ outl(1<<11, gpio_base + GPIOx_OUT_VAL); ++ ++ /* Turn off the scanline interrupt */ ++ if (dcon_write(DCON_REG_MODE, dcon_disp_mode)) ++ printk(KERN_ERR "olpc-dcon: couldn't disable scanline interrupt!\n"); ++ ++ printk(KERN_INFO "olpc-dcon: The CPU has control\n"); ++ break; ++ case DCON_SOURCE_DCON: ++ { ++ int t; ++ ++ add_wait_queue(&dcon_wait_queue, &wait); ++ set_current_state(TASK_UNINTERRUPTIBLE); ++ ++ /* Clear GPIO11 (DCONLOAD) - this implies that the DCON is in ++ control */ ++ ++ outl(1 << (11 + 16), gpio_base + GPIOx_OUT_VAL); ++ ++ t = schedule_timeout(HZ/2); ++ remove_wait_queue(&dcon_wait_queue, &wait); ++ set_current_state(TASK_RUNNING); ++ ++ if (!dcon_switched) ++ printk(KERN_ERR "olpc-dcon: Timeout entering DCON mode; expect a screen glitch.\n"); ++ ++ acquire_console_sem(); ++ if (fb_blank(fbinfo, FB_BLANK_POWERDOWN)) ++ printk(KERN_ERR "olpc-dcon: couldn't blank fb!\n"); ++ release_console_sem(); ++ ++ printk(KERN_INFO "olpc-dcon: The DCON has control\n"); ++ break; ++ } ++ default: ++ BUG(); ++ } ++ ++ dcon_source = source; ++} ++ ++static DECLARE_WORK(dcon_work, dcon_source_switch); ++ ++static int dcon_set_source(int arg) ++{ ++ if (arg != DCON_SOURCE_CPU && arg != DCON_SOURCE_DCON) ++ return -EINVAL; ++ ++ if (dcon_pending == arg) ++ return 0; ++ ++ dcon_pending = arg; ++ if ((dcon_source != arg) && !work_pending(&dcon_work)) ++ schedule_work(&dcon_work); ++ ++ return 0; ++} ++ ++static int dcon_set_source_sync(int arg) ++{ ++ int ret = dcon_set_source(arg); ++ if (!ret) ++ flush_scheduled_work(); ++ return ret; ++} ++ ++static int dconbl_set(struct backlight_device *dev) { ++ ++ int level = dev->props.brightness; ++ ++ if (dev->props.power != FB_BLANK_UNBLANK) ++ level = 0; ++ ++ dcon_set_backlight(level); ++ return 0; ++} ++ ++static int dconbl_get(struct backlight_device *dev) { ++ return dcon_get_backlight(); ++} ++ ++static ssize_t dcon_mode_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%4.4X\n", dcon_disp_mode); ++} ++ ++static ssize_t dcon_sleep_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%d\n", dcon_sleep_val); ++} ++ ++static ssize_t /* __deprecated */ dcon_source_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n"); ++ return sprintf(buf, "%d\n", dcon_source); ++} ++ ++static ssize_t dcon_freeze_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%d\n", dcon_source == DCON_SOURCE_DCON ? 1 : 0); ++} ++ ++static ssize_t dcon_output_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%d\n", dcon_output); ++} ++ ++static ssize_t dcon_resumeline_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%d\n", resumeline); ++} ++ ++static int _strtoul(const char *buf, int len, unsigned int *val) ++{ ++ ++ char *endp; ++ unsigned int output = simple_strtoul(buf, &endp, 0); ++ int size = endp - buf; ++ ++ if (*endp && isspace(*endp)) ++ size++; ++ ++ if (size != len) ++ return -EINVAL; ++ ++ *val = output; ++ return 0; ++} ++ ++static ssize_t dcon_output_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ int output; ++ int rc = -EINVAL; ++ ++ if (_strtoul(buf, count, &output)) ++ return -EINVAL; ++ ++ if (output == DCON_OUTPUT_COLOR || output == DCON_OUTPUT_MONO) { ++ dcon_set_output(output); ++ rc = count; ++ } ++ ++ return rc; ++} ++ ++static ssize_t /* __deprecated */ dcon_source_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ int output; ++ int rc = -EINVAL; ++ ++ printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n"); ++ if (_strtoul(buf, count, &output)) ++ return -EINVAL; ++ ++ dcon_set_source(output); ++ rc = count; ++ ++ return rc; ++} ++ ++static ssize_t dcon_freeze_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ int output; ++ int rc = -EINVAL; ++ ++ if (_strtoul(buf, count, &output)) ++ return rc; ++ ++ dcon_set_source(output ? DCON_SOURCE_DCON : DCON_SOURCE_CPU); ++ rc = count; ++ ++ return rc; ++} ++ ++static ssize_t dcon_resumeline_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ int rl; ++ int rc = -EINVAL; ++ ++ if (_strtoul(buf, count, &rl)) ++ return rc; ++ ++ resumeline = rl; ++ dcon_write(DCON_REG_SCAN_INT, resumeline); ++ rc = count; ++ ++ return rc; ++} ++ ++static ssize_t dcon_sleep_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ int output; ++ ++ if (_strtoul(buf, count, &output)) ++ return -EINVAL; ++ ++ dcon_sleep(output ? DCON_SLEEP : DCON_ACTIVE); ++ return count; ++} ++ ++static struct device_attribute dcon_device_files[] = { ++ __ATTR(mode, 0444, dcon_mode_show, NULL), ++ __ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store), ++ __ATTR(source, 0644, dcon_source_show, dcon_source_store), ++ __ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store), ++ __ATTR(output, 0644, dcon_output_show, dcon_output_store), ++ __ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store), ++}; ++ ++static struct backlight_ops dcon_bl_ops = { ++ .get_brightness = dconbl_get, ++ .update_status = dconbl_set ++}; ++ ++/* List of GPIOs that we care about: ++ (in) GPIO12 -- DCONBLNK ++ (in) GPIO[56] -- DCONSTAT[01] ++ (out) GPIO11 -- DCONLOAD ++*/ ++ ++#define IN_GPIOS ((1<<5) | (1<<6) | (1<<7) | (1<<12)) ++#define OUT_GPIOS (1<<11) ++ ++static irqreturn_t dcon_interrupt(int, void *); ++ ++static int dcon_request_irq(void) ++{ ++ unsigned long lo, hi; ++ unsigned char lob; ++ ++ rdmsr(MSR_LBAR_GPIO, lo, hi); ++ ++ /* Check the mask and whether GPIO is enabled (sanity check) */ ++ if (hi != 0x0000f001) { ++ printk(KERN_ERR "GPIO not enabled -- cannot use DCON\n"); ++ return -ENODEV; ++ } ++ ++ /* Mask off the IO base address */ ++ gpio_base = lo & 0x0000ff00; ++ ++ /* Turn off the event enable for GPIO7 just to be safe */ ++ outl(1 << (16+7), gpio_base + GPIOx_EVNT_EN); ++ ++ /* Set the directions for the GPIO pins */ ++ outl(OUT_GPIOS | (IN_GPIOS << 16), gpio_base + GPIOx_OUT_EN); ++ outl(IN_GPIOS | (OUT_GPIOS << 16), gpio_base + GPIOx_IN_EN); ++ ++ /* Set up the interrupt mappings */ ++ ++ /* Set the IRQ to pair 2 */ ++ geode_gpio_event_irq(OLPC_GPIO_DCON_IRQ, 2); ++ ++ /* Enable group 2 to trigger the DCON interrupt */ ++ geode_gpio_set_irq(2, DCON_IRQ); ++ ++ /* Select edge level for interrupt (in PIC) */ ++ ++ lob = inb(0x4d0); ++ lob &= ~(1 << DCON_IRQ); ++ outb(lob, 0x4d0); ++ ++ /* Register the interupt handler */ ++ if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver)) ++ return -EIO; ++ ++ /* Clear INV_EN for GPIO7 (DCONIRQ) */ ++ outl((1<<(16+7)), gpio_base + GPIOx_INV_EN); ++ ++ /* Enable filter for GPIO12 (DCONBLANK) */ ++ outl(1<<(12), gpio_base + GPIOx_IN_FLTR_EN); ++ ++ /* Disable filter for GPIO7 */ ++ outl(1<<(16+7), gpio_base + GPIOx_IN_FLTR_EN); ++ ++ /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ ++ ++ outl(1<<(16+7), gpio_base + GPIOx_EVNTCNT_EN); ++ outl(1<<(16+12), gpio_base + GPIOx_EVNTCNT_EN); ++ ++ /* Add GPIO12 to the Filter Event Pair #7 */ ++ outb(12, gpio_base + GPIO_FE7_SEL); ++ ++ /* Turn off negative Edge Enable for GPIO12 */ ++ outl(1<<(16+12), gpio_base + GPIOx_NEGEDGE_EN); ++ ++ /* Enable negative Edge Enable for GPIO7 */ ++ outl(1<<7, gpio_base + GPIOx_NEGEDGE_EN); ++ ++ /* Zero the filter amount for Filter Event Pair #7 */ ++ outw(0, gpio_base + GPIO_FLT7_AMNT); ++ ++ /* Clear the negative edge status for GPIO7 and GPIO12 */ ++ outl((1<<7) | (1<<12), gpio_base+0x4c); ++ ++ /* FIXME: Clear the posiitive status as well, just to be sure */ ++ outl((1<<7) | (1<<12), gpio_base+0x48); ++ ++ /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ ++ outl((1<<(7))|(1<<12), gpio_base + GPIOx_EVNT_EN); ++ ++ /* Determine the current state by reading the GPIO bit */ ++ /* Earlier stages of the boot process have established the state */ ++ dcon_source = inl(gpio_base + GPIOx_OUT_VAL) & (1<<11) ++ ? DCON_SOURCE_CPU ++ : DCON_SOURCE_DCON; ++ dcon_pending = dcon_source; ++ ++ return 0; ++} ++ ++static int dcon_reboot_notify(struct notifier_block *nb, unsigned long foo, void *bar) ++{ ++ if (dcon_client == NULL) ++ return 0; ++ ++ /* Turn off the DCON. Entirely. */ ++ dcon_write(DCON_REG_MODE, 0x39); ++ dcon_write(DCON_REG_MODE, 0x32); ++ return 0; ++} ++ ++static int dcon_conswitch_notify(struct notifier_block *nb, ++ unsigned long mode, void *dummy) ++{ ++ if (mode == CONSOLE_EVENT_SWITCH_TEXT) ++ dcon_sleep(DCON_ACTIVE); ++ ++ return 0; ++} ++ ++static struct notifier_block dcon_nb = { ++ .notifier_call = dcon_reboot_notify, ++ .priority = -1, ++}; ++ ++static struct notifier_block dcon_console_nb = { ++ .notifier_call = dcon_conswitch_notify, ++ .priority = -1, ++}; ++ ++static int unfreeze_on_panic(struct notifier_block *nb, unsigned long e, void *p) ++{ ++ outl(1<<11, gpio_base + GPIOx_OUT_VAL); ++ return NOTIFY_DONE; ++} ++ ++static struct notifier_block dcon_panic_nb = { ++ .notifier_call = unfreeze_on_panic, ++}; ++ ++static int dcon_probe(struct i2c_adapter *adap, int addr, int kind) ++{ ++ struct i2c_client *client; ++ int rc, i; ++ ++ if (!olpc_has_dcon()) { ++ printk("olpc-dcon: No DCON is attached.\n"); ++ return -ENODEV; ++ } ++ ++ if (num_registered_fb >= 1) ++ fbinfo = registered_fb[0]; ++ ++ if (adap->id != I2C_HW_SMBUS_SCX200) { ++ printk(KERN_ERR "olpc-dcon: Invalid I2C bus (%d not %d)\n", ++ adap->id, I2C_HW_SMBUS_SCX200); ++ return -ENXIO; ++ } ++ ++ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); ++ if (client == NULL) ++ return -ENOMEM; ++ ++ strncpy(client->name, "OLPC-DCON", I2C_NAME_SIZE); ++ client->addr = addr; ++ client->adapter = adap; ++ client->driver = &dcon_driver; ++ ++ if ((rc = i2c_attach_client(client)) != 0) { ++ printk(KERN_ERR "olpc-dcon: Unable to attach the I2C client.\n"); ++ goto eclient; ++ } ++ ++ rc = dcon_hw_init(client, 1); ++ if (rc) ++ goto ei2c; ++ ++ /* Add the DCON device */ ++ ++ dcon_device = platform_device_alloc("dcon", -1); ++ ++ if (dcon_device == NULL) { ++ printk(KERN_ERR "dcon: Unable to create the DCON device\n"); ++ rc = -ENOMEM; ++ goto eirq; ++ } ++ ++ if ((rc = platform_device_add(dcon_device))) { ++ printk(KERN_ERR "dcon: Unable to add the DCON device\n"); ++ goto edev; ++ } ++ ++ for(i = 0; i < ARRAY_SIZE(dcon_device_files); i++) ++ device_create_file(&dcon_device->dev, &dcon_device_files[i]); ++ ++ /* Add the backlight device for the DCON */ ++ ++ dcon_client = client; ++ ++ dcon_bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev, ++ NULL, &dcon_bl_ops); ++ ++ if (IS_ERR(dcon_bl_dev)) { ++ printk(KERN_INFO "Could not register the backlight device for the DCON (%ld)\n", PTR_ERR(dcon_bl_dev)); ++ dcon_bl_dev = NULL; ++ } ++ else { ++ dcon_bl_dev->props.max_brightness = 15; ++ dcon_bl_dev->props.power = FB_BLANK_UNBLANK; ++ dcon_bl_dev->props.brightness = dcon_get_backlight(); ++ ++ backlight_update_status(dcon_bl_dev); ++ } ++ ++ register_reboot_notifier(&dcon_nb); ++ console_event_register(&dcon_console_nb); ++ atomic_notifier_chain_register(&panic_notifier_list, &dcon_panic_nb); ++ ++ return 0; ++ ++ edev: ++ platform_device_unregister(dcon_device); ++ dcon_device = NULL; ++ eirq: ++ free_irq(DCON_IRQ, &dcon_driver); ++ ei2c: ++ i2c_detach_client(client); ++ eclient: ++ kfree(client); ++ ++ return rc; ++} ++ ++static int dcon_attach(struct i2c_adapter *adap) ++{ ++ int ret; ++ ++ ret = i2c_probe(adap, &addr_data, dcon_probe); ++ ++ if (dcon_client == NULL) ++ printk(KERN_ERR "olpc-dcon: No DCON found on SMBus\n"); ++ ++ return ret; ++} ++ ++static int dcon_detach(struct i2c_client *client) ++{ ++ int rc; ++ dcon_client = NULL; ++ ++ unregister_reboot_notifier(&dcon_nb); ++ console_event_unregister(&dcon_console_nb); ++ atomic_notifier_chain_unregister(&panic_notifier_list, &dcon_panic_nb); ++ ++ free_irq(DCON_IRQ, &dcon_driver); ++ ++ if ((rc = i2c_detach_client(client)) == 0) ++ kfree(i2c_get_clientdata(client)); ++ ++ if (dcon_bl_dev != NULL) ++ backlight_device_unregister(dcon_bl_dev); ++ ++ if (dcon_device != NULL) ++ platform_device_unregister(dcon_device); ++ cancel_work_sync(&dcon_work); ++ ++ return rc; ++} ++ ++ ++#ifdef CONFIG_PM ++static int dcon_suspend(struct i2c_client *client, pm_message_t state) ++{ ++ if (dcon_sleep_val != DCON_ACTIVE) ++ return 0; ++ ++ /* Set up the DCON to have the source */ ++ return dcon_set_source_sync(DCON_SOURCE_DCON); ++} ++ ++static int dcon_resume(struct i2c_client *client) ++{ ++ if (dcon_sleep_val != DCON_ACTIVE) ++ return 0; ++ ++ dcon_bus_stabilize(client, 0); ++ ++ return dcon_set_source(DCON_SOURCE_CPU); ++} ++ ++#endif ++ ++static irqreturn_t dcon_interrupt(int irq, void *id) ++{ ++ int status = inl(gpio_base + GPIOx_READ_BACK) >> 5; ++ ++ /* Clear the negative edge status for GPIO7 */ ++ outl(1 << 7, gpio_base + GPIOx_NEGEDGE_STS); ++ ++ switch (status & 3) { ++ case 3: ++ printk(KERN_DEBUG "olpc-dcon: DCONLOAD_MISSED interrupt\n"); ++ break; ++ case 2: /* switch to DCON mode */ ++ case 1: /* switch to CPU mode */ ++ dcon_switched = 1; ++ wake_up(&dcon_wait_queue); ++ break; ++ case 0: ++ printk(KERN_DEBUG "olpc-dcon: scanline interrupt w/CPU\n"); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static struct i2c_driver dcon_driver = { ++ .driver = { ++ .name = "OLPC-DCON", ++ }, ++ .id = I2C_DRIVERID_DCON, ++ .attach_adapter = dcon_attach, ++ .detach_client = dcon_detach, ++#ifdef CONFIG_PM ++ .suspend = dcon_suspend, ++ .resume = dcon_resume, ++#endif ++}; ++ ++ ++static int __init olpc_dcon_init(void) ++{ ++ i2c_add_driver(&dcon_driver); ++ return 0; ++} ++ ++static void __exit olpc_dcon_exit(void) ++{ ++ i2c_del_driver(&dcon_driver); ++} ++ ++module_init(olpc_dcon_init); ++module_exit(olpc_dcon_exit); ++ ++MODULE_LICENSE("GPL"); +Binary files linux_2.6.24_org/drivers/video/.olpc_dcon.c.swp and linux_2.6.24_olpc/drivers/video/.olpc_dcon.c.swp differ +diff -purN linux_2.6.24_org/drivers/video/olpc_dcon.h linux_2.6.24_olpc/drivers/video/olpc_dcon.h +--- linux_2.6.24_org/drivers/video/olpc_dcon.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/drivers/video/olpc_dcon.h 2008-02-15 18:58:35.000000000 +0000 +@@ -0,0 +1,75 @@ ++#ifndef OLPC_DCON_H_ ++#define OLPC_DCON_H_ ++ ++/* DCON registers */ ++ ++#define DCON_REG_ID 0 ++#define DCON_REG_MODE 1 ++ ++#define MODE_PASSTHRU (1<<0) ++#define MODE_SLEEP (1<<1) ++#define MODE_SLEEP_AUTO (1<<2) ++#define MODE_BL_ENABLE (1<<3) ++#define MODE_BLANK (1<<4) ++#define MODE_CSWIZZLE (1<<5) ++#define MODE_COL_AA (1<<6) ++#define MODE_MONO_LUMA (1<<7) ++#define MODE_SCAN_INT (1<<8) ++#define MODE_CLOCKDIV (1<<9) ++#define MODE_DEBUG (1<<14) ++#define MODE_SELFTEST (1<<15) ++ ++#define DCON_REG_HRES 2 ++#define DCON_REG_HTOTAL 3 ++#define DCON_REG_HSYNC_WIDTH 4 ++#define DCON_REG_VRES 5 ++#define DCON_REG_VTOTAL 6 ++#define DCON_REG_VSYNC_WIDTH 7 ++#define DCON_REG_TIMEOUT 8 ++#define DCON_REG_SCAN_INT 9 ++#define DCON_REG_BRIGHT 10 ++ ++/* GPIO registers (CS5536) */ ++ ++#define MSR_LBAR_GPIO 0x5140000C ++ ++#define GPIOx_OUT_VAL 0x00 ++#define GPIOx_OUT_EN 0x04 ++#define GPIOx_IN_EN 0x20 ++#define GPIOx_INV_EN 0x24 ++#define GPIOx_IN_FLTR_EN 0x28 ++#define GPIOx_EVNTCNT_EN 0x2C ++#define GPIOx_READ_BACK 0x30 ++#define GPIOx_EVNT_EN 0x38 ++#define GPIOx_NEGEDGE_EN 0x44 ++#define GPIOx_NEGEDGE_STS 0x4C ++#define GPIO_FLT7_AMNT 0xD8 ++#define GPIO_MAP_X 0xE0 ++#define GPIO_MAP_Y 0xE4 ++#define GPIO_FE7_SEL 0xF7 ++ ++ ++/* Status values */ ++ ++#define DCONSTAT_SCANINT 0 ++#define DCONSTAT_SCANINT_DCON 1 ++#define DCONSTAT_DISPLAYLOAD 2 ++#define DCONSTAT_MISSED 3 ++ ++/* Source values */ ++ ++#define DCON_SOURCE_DCON 0 ++#define DCON_SOURCE_CPU 1 ++ ++/* Output values */ ++#define DCON_OUTPUT_COLOR 0 ++#define DCON_OUTPUT_MONO 1 ++ ++/* Sleep values */ ++#define DCON_ACTIVE 0 ++#define DCON_SLEEP 1 ++ ++/* Interrupt */ ++#define DCON_IRQ 6 ++ ++#endif +diff -purN linux_2.6.24_org/fs/jffs2/nodelist.h linux_2.6.24_olpc/fs/jffs2/nodelist.h +--- linux_2.6.24_org/fs/jffs2/nodelist.h 2008-02-15 20:10:35.000000000 +0000 ++++ linux_2.6.24_olpc/fs/jffs2/nodelist.h 2008-02-15 18:57:39.000000000 +0000 +@@ -197,7 +197,7 @@ struct jffs2_inode_cache { + #define RAWNODE_CLASS_XATTR_DATUM 1 + #define RAWNODE_CLASS_XATTR_REF 2 + +-#define INOCACHE_HASHSIZE 128 ++#define INOCACHE_HASHSIZE 1024 + + #define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size) + +diff -purN linux_2.6.24_org/fs/Kconfig linux_2.6.24_olpc/fs/Kconfig +--- linux_2.6.24_org/fs/Kconfig 2008-02-15 20:10:31.000000000 +0000 ++++ linux_2.6.24_olpc/fs/Kconfig 2008-02-15 18:57:33.000000000 +0000 +@@ -1031,6 +1031,37 @@ config HUGETLBFS + config HUGETLB_PAGE + def_bool HUGETLBFS + ++config PROMFS_FS ++ tristate "PromFS IEEE 1275 file system support" ++ depends on SPARC || PPC || OLPC ++ help ++ PromFS is a file system interface to various IEEE-1275 compatible ++ firmwares. If you have such a firmware (Sparc64, PowerPC, and ++ some other architectures and embedded systems have such firmwares, ++ with names like "OpenBoot (tm)" and "OpenFirmware"), say Y here ++ to be able to access the firmware's device-tree from Linux. ++ ++ The firmware device-tree is available as a virtual file system, ++ can be mounted under /prom with the command "mount -t promfs ++ none /prom". ++ ++ To compile PromFS support as a module, choose M here; the module ++ will be called promfs. If unsure, choose M. ++ ++config RAMFS ++ bool ++ default y ++ ---help--- ++ Ramfs is a file system which keeps all files in RAM. It allows ++ read and write access. ++ ++ It is more of an programming example than a useable file system. If ++ you need a file system which lives in RAM with limit checking use ++ tmpfs. ++ ++ To compile this as a module, choose M here: the module will be called ++ ramfs. ++ + config CONFIGFS_FS + tristate "Userspace-driven configuration filesystem (EXPERIMENTAL)" + depends on SYSFS && EXPERIMENTAL +diff -purN linux_2.6.24_org/fs/Makefile linux_2.6.24_olpc/fs/Makefile +--- linux_2.6.24_org/fs/Makefile 2008-02-15 20:10:33.000000000 +0000 ++++ linux_2.6.24_olpc/fs/Makefile 2008-02-15 18:57:34.000000000 +0000 +@@ -110,6 +110,7 @@ obj-$(CONFIG_ADFS_FS) += adfs/ + obj-$(CONFIG_FUSE_FS) += fuse/ + obj-$(CONFIG_UDF_FS) += udf/ + obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/ ++obj-$(CONFIG_PROMFS_FS) += promfs/ + obj-$(CONFIG_JFS_FS) += jfs/ + obj-$(CONFIG_XFS_FS) += xfs/ + obj-$(CONFIG_9P_FS) += 9p/ +diff -purN linux_2.6.24_org/fs/promfs/Makefile linux_2.6.24_olpc/fs/promfs/Makefile +--- linux_2.6.24_org/fs/promfs/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/fs/promfs/Makefile 2008-02-15 18:57:33.000000000 +0000 +@@ -0,0 +1 @@ ++obj-$(CONFIG_PROMFS_FS) += promfs.o +diff -purN linux_2.6.24_org/fs/promfs/promfs.c linux_2.6.24_olpc/fs/promfs/promfs.c +--- linux_2.6.24_org/fs/promfs/promfs.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/fs/promfs/promfs.c 2008-02-15 18:57:33.000000000 +0000 +@@ -0,0 +1,295 @@ ++/* ++ * promfs.c - generic inode/dentry functions for IEEE 1275-based filesystems. ++ * ++ * This is based heavily upon prior ieee1275 and other virtual filesystems ++ * implementations; openpromfs, proc_devtree.c, oprofilefs, procfs, ... ++ * ++ * Copyright (C) 2007 Andres Salomon ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. ++ */ ++ ++#include ++#include ++#include ++#include ++//#include ++#include ++ ++#define PROMFS_MAGIC 0x1f2f3fff ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Andres Salomon"); ++ ++struct promfs_inode ++{ ++ struct inode ino; ++ struct property *prop; ++}; ++ ++static inline struct promfs_inode *to_promfs_inode(struct inode *inode) ++{ ++ return container_of(inode, struct promfs_inode, ino); ++} ++ ++#if 0 ++static DEFINE_SPINLOCK(promfs_lock); ++ ++static struct of_node *of_tree = NULL; ++static DEFINE_RWLOCK(of_tree_lock); ++ ++void __init of_build_tree(void) ++{ ++ ++ ++} ++#endif ++ ++static int promfs_open_file(struct inode *inode, struct file *file) ++{ ++ struct promfs_inode *ino; ++ ++ ino = to_promfs_inode(inode); ++ if (!ino->prop) ++ return -EIO; ++ file->private_data = ino->prop; ++ ++ return 0; ++} ++ ++static ssize_t promfs_read_file(struct file *file, char __user *data, ++ size_t len, loff_t *ppos) ++{ ++ struct property *prop = (struct property *) file->private_data; ++ return simple_read_from_buffer(data, len, ppos, prop->value, ++ prop->length); ++} ++ ++static ssize_t promfs_write_file(struct file *file, char const __user *buf, ++ size_t count, loff_t * offset) ++{ ++ /* TODO.... 'cause, y'know, it would be nice. */ ++ return -EIO; ++} ++ ++static struct file_operations promfs_file_ops = { ++ .open = promfs_open_file, ++ .read = promfs_read_file, ++ .write = promfs_write_file, ++}; ++ ++static struct kmem_cache *promfs_inode_cachep; ++ ++static struct inode *promfs_alloc_inode(struct super_block *sb) ++{ ++ struct promfs_inode *pr_ino; ++ ++ pr_ino = kmem_cache_alloc(promfs_inode_cachep, GFP_KERNEL); ++ if (!pr_ino) ++ return NULL; ++ pr_ino->prop = NULL; ++ ++ return &pr_ino->ino; ++} ++ ++static void promfs_destroy_inode(struct inode *inode) ++{ ++ kmem_cache_free(promfs_inode_cachep, to_promfs_inode(inode)); ++} ++ ++static void promfs_read_inode(struct inode *inode) ++{ ++ inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; ++} ++ ++static int promfs_remount(struct super_block *sb, int *flags, char *data) ++{ ++ *flags |= MS_NOATIME; ++ return 0; ++} ++ ++static struct super_operations promfs_s_ops = { ++ .alloc_inode = promfs_alloc_inode, ++ .destroy_inode = promfs_destroy_inode, ++ .read_inode = promfs_read_inode, ++ .statfs = simple_statfs, ++ .drop_inode = generic_delete_inode, ++ .remount_fs = promfs_remount, ++}; ++ ++static struct inode *promfs_get_inode(struct super_block *sb, int mode) ++{ ++ struct inode *inode = new_inode(sb); ++ ++ if (inode) { ++ inode->i_mode = mode; ++ inode->i_uid = 0; ++ inode->i_gid = 0; ++ inode->i_blocks = 0; ++ inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME; ++ } ++ ++ return inode; ++} ++ ++static int promfs_create_file(struct super_block *sb, struct dentry *root, ++ struct property *prop, const struct file_operations *fops) ++{ ++ struct dentry *dentry; ++ struct inode *inode; ++ struct promfs_inode *ino; ++ ++ dentry = d_alloc_name(root, prop->name); ++ if (!dentry) ++ goto err; ++ ++ inode = promfs_get_inode(sb, S_IFREG | 0644); ++ if (!inode) ++ goto err_dput; ++ inode->i_fop = fops; ++ ino = to_promfs_inode(inode); ++ ino->prop = prop; ++ d_add(dentry, inode); ++ ++ return 0; ++ ++err_dput: ++ dput(dentry); ++err: ++ return -EFAULT; ++} ++ ++struct dentry *promfs_create_dir(struct super_block *sb, struct dentry *root, ++ char const *name) ++{ ++ struct dentry *dentry; ++ struct inode *inode; ++ ++ dentry = d_alloc_name(root, name); ++ if (!dentry) ++ goto err; ++ ++ inode = promfs_get_inode(sb, S_IFDIR | 0755); ++ if (!inode) ++ goto err_dput; ++ inode->i_op = &simple_dir_inode_operations; ++ inode->i_fop = &simple_dir_operations; ++ d_add(dentry, inode); ++ return dentry; ++ ++err_dput: ++ dput(dentry); ++err: ++ return NULL; ++} ++ ++void promfs_populate(struct super_block *sb, struct dentry *root, ++ struct device_node *node) ++{ ++ struct dentry *dentry; ++ struct device_node *child; ++ struct property *prop; ++ ++ if (!node) ++ return; ++ ++ for (child = node->child; child; child = child->sibling) { ++ dentry = promfs_create_dir(sb, root, child->path_component_name); ++ promfs_populate(sb, dentry, child); ++ } ++ for (prop = node->properties; prop; prop = prop->next) ++ promfs_create_file(sb, root, prop, &promfs_file_ops); ++} ++ ++static int promfs_fill_super(struct super_block *sb, void *data, int silent) ++{ ++ struct inode *root_inode; ++ struct dentry *root_dentry; ++ struct promfs_inode *inode; ++ ++ sb->s_blocksize = PAGE_CACHE_SIZE; ++ sb->s_blocksize_bits = PAGE_CACHE_SHIFT; ++ sb->s_magic = PROMFS_MAGIC; ++ sb->s_op = &promfs_s_ops; ++ sb->s_time_gran = 1; ++ sb->s_flags |= MS_NOATIME; ++ ++ root_inode = promfs_get_inode(sb, S_IFDIR | 0755); ++ if (!root_inode) ++ goto err; ++ root_inode->i_op = &simple_dir_inode_operations; ++ root_inode->i_fop = &simple_dir_operations; ++ ++ inode = to_promfs_inode(root_inode); ++ ++ root_dentry = d_alloc_root(root_inode); ++ if (!root_dentry) ++ goto err_iput; ++ sb->s_root = root_dentry; ++ ++ promfs_populate(sb, root_dentry, of_find_node_by_path("/")); ++ return 0; ++ ++err_iput: ++ iput(root_inode); ++err: ++ return -ENOMEM; ++} ++ ++static int promfs_get_sb(struct file_system_type *fs_type, int flags, ++ const char *dev_name, void *data, struct vfsmount *mnt) ++{ ++ return get_sb_single(fs_type, flags, data, promfs_fill_super, mnt); ++} ++ ++static struct file_system_type promfs_fs_type = { ++ .owner = THIS_MODULE, ++ .name = "promfs", ++ .get_sb = promfs_get_sb, ++ .kill_sb = kill_litter_super, ++}; ++ ++static void init_once(void *i, struct kmem_cache *cachep, unsigned long fl) ++{ ++ struct promfs_inode *inode = (struct promfs_inode *) i; ++ inode_init_once(&inode->ino); ++} ++ ++static int __init init_promfs(void) ++{ ++ int err; ++ ++ prom_build_devicetree(); ++ promfs_inode_cachep = kmem_cache_create("promfs_inode_cache", ++ sizeof(struct promfs_inode), 0, ++ SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD, init_once, NULL); ++ if (!promfs_inode_cachep) ++ return -ENOMEM; ++ ++ err = register_filesystem(&promfs_fs_type); ++ if (err) ++ kmem_cache_destroy(promfs_inode_cachep); ++ ++ return err; ++} ++ ++static void __exit exit_promfs(void) ++{ ++ unregister_filesystem(&promfs_fs_type); ++ kmem_cache_destroy(promfs_inode_cachep); ++} ++ ++module_init(init_promfs); ++module_exit(exit_promfs); +diff -purN linux_2.6.24_org/include/asm-x86/ofw.h linux_2.6.24_olpc/include/asm-x86/ofw.h +--- linux_2.6.24_org/include/asm-x86/ofw.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/include/asm-x86/ofw.h 2008-02-15 18:57:59.000000000 +0000 +@@ -0,0 +1,16 @@ ++/* ++ * Definitions for Open Firmware client interface on 32-bit system. ++ * OF Cell size is 4. Integer properties are encoded big endian, ++ * as with all OF implementations. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++#ifndef _OFW_H ++#define _OFW_H ++ ++extern int ofw(char *, int, int, ...); ++ ++#endif +diff -purN linux_2.6.24_org/include/asm-x86/olpc.h linux_2.6.24_olpc/include/asm-x86/olpc.h +--- linux_2.6.24_org/include/asm-x86/olpc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/include/asm-x86/olpc.h 2008-02-15 18:57:59.000000000 +0000 +@@ -0,0 +1,107 @@ ++/* OLPC machine specific definitions */ ++ ++#ifndef ASM_OLPC_H_ ++#define ASM_OLPC_H_ ++ ++#include ++ ++struct olpc_platform_t { ++ int flags; ++ u32 boardrev; ++ int ecver; ++}; ++ ++#define OLPC_F_PRESENT 0x01 ++#define OLPC_F_DCON 0x02 ++#define OLPC_F_VSA 0x04 ++ ++/* ++ * OLPC board IDs contain the major build number within the mask 0x0ff0, ++ * and the minor build number withing 0x000f. Pre-builds have a minor ++ * number less than 8, and normal builds start at 8. For example, 0x0B10 ++ * is a PreB1, and 0x0C18 is a C1. ++ */ ++ ++static inline u32 olpc_board(u8 id) ++{ ++ return (id << 4) | 0x8; ++} ++ ++static inline u32 olpc_board_pre(u8 id) ++{ ++ return id << 4; ++} ++ ++#ifndef CONFIG_OLPC ++ ++static inline int machine_is_olpc(void) { return 0; } ++static inline int olpc_has_dcon(void) { return 0; } ++static inline int olpc_has_vsa(void) { return 0; } ++ ++#else ++ ++extern struct olpc_platform_t olpc_platform_info; ++ ++static inline int ++machine_is_olpc(void) ++{ ++ return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0; ++} ++ ++static inline int ++olpc_has_dcon(void) ++{ ++ return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0; ++} ++ ++static inline int ++olpc_has_vsa(void) ++{ ++ return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0; ++} ++ ++static inline int olpc_board_at_least(u32 rev) ++{ ++ return olpc_platform_info.boardrev >= rev; ++} ++ ++#endif ++ ++/* EC functions */ ++ ++int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, ++ unsigned char *outbuf, size_t outlen); ++ ++void olpc_register_battery_callback(void (*f)(unsigned long)); ++void olpc_deregister_battery_callback(void); ++ ++/* EC commands and responses */ ++ ++/* SCI source values */ ++ ++#define EC_SCI_SRC_EMPTY 0x00 ++#define EC_SCI_SRC_GAME 0x01 ++#define EC_SCI_SRC_BATTERY 0x02 ++#define EC_SCI_SRC_BATSOC 0x04 ++#define EC_SCI_SRC_BATERR 0x08 ++#define EC_SCI_SRC_EBOOK 0x10 ++#define EC_SCI_SRC_WLAN 0x20 ++#define EC_SCI_SRC_ACPWR 0x40 ++#define EC_SCI_SRC_ALL 0x7F ++ ++int olpc_ec_mask_set(u8 bits); ++int olpc_ec_mask_unset(u8 bits); ++ ++/* GPIO assignments */ ++ ++#define OLPC_GPIO_MIC_AC (1 << 1) ++#define OLPC_GPIO_DCON_IRQ (1 << 7) ++#define OLPC_GPIO_THRM_ALRM (1 << 10) ++#define OLPC_GPIO_SMB_CLK (1 << 14) ++#define OLPC_GPIO_SMB_DATA (1 << 15) ++#define OLPC_GPIO_WORKAUX (1 << 24) ++#define OLPC_GPIO_LID (1 << 26) ++#define OLPC_GPIO_ECSCI (1 << 27) ++ ++#endif ++ +diff -purN linux_2.6.24_org/include/asm-x86/prom.h linux_2.6.24_olpc/include/asm-x86/prom.h +--- linux_2.6.24_org/include/asm-x86/prom.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/include/asm-x86/prom.h 2008-02-15 18:57:59.000000000 +0000 +@@ -0,0 +1,108 @@ ++#ifndef _I386_PROM_H ++#define _I386_PROM_H ++#ifdef __KERNEL__ ++ ++ ++/* ++ * Definitions for talking to the Open Firmware PROM on ++ * Power Macintosh computers. ++ * ++ * Copyright (C) 1996-2005 Paul Mackerras. ++ * ++ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. ++ * Updates for SPARC64 by David S. Miller ++ * Updates for i386/OLPC by Andres Salomon ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++ ++typedef u32 phandle; ++typedef u32 ihandle; ++ ++struct property { ++ char *name; ++ int length; ++ void *value; ++ struct property *next; ++}; ++ ++struct device_node { ++ const char *name; ++ const char *type; ++ phandle node; ++// phandle linux_phandle; ++ char *path_component_name; ++ char *full_name; ++ ++ struct property *properties; ++ struct property *deadprops; /* removed properties */ ++ struct device_node *parent; ++ struct device_node *child; ++ struct device_node *sibling; ++ struct device_node *next; /* next device of same type */ ++ struct device_node *allnext; /* next in list of all nodes */ ++ struct proc_dir_entry *pde; /* this node's proc directory */ ++ struct kref kref; ++ unsigned long _flags; ++ void *data; ++}; ++ ++/* flag descriptions */ ++#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */ ++ ++#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags) ++#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags) ++ ++#define OF_BAD_ADDR ((u64)-1) ++ ++static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de) ++{ ++ dn->pde = de; ++} ++ ++extern struct device_node *of_find_node_by_name(struct device_node *from, ++ const char *name); ++#define for_each_node_by_name(dn, name) \ ++ for (dn = of_find_node_by_name(NULL, name); dn; \ ++ dn = of_find_node_by_name(dn, name)) ++extern struct device_node *of_find_node_by_type(struct device_node *from, ++ const char *type); ++#define for_each_node_by_type(dn, type) \ ++ for (dn = of_find_node_by_type(NULL, type); dn; \ ++ dn = of_find_node_by_type(dn, type)) ++extern struct device_node *of_find_compatible_node(struct device_node *from, ++ const char *type, const char *compat); ++extern struct device_node *of_find_node_by_path(const char *path); ++extern struct device_node *of_find_node_by_phandle(phandle handle); ++extern struct device_node *of_get_parent(const struct device_node *node); ++extern struct device_node *of_get_next_child(const struct device_node *node, ++ struct device_node *prev); ++extern struct property *of_find_property(const struct device_node *np, ++ const char *name, ++ int *lenp); ++//extern struct device_node *of_node_get(struct device_node *node); ++//extern void of_node_put(struct device_node *node); ++extern int of_device_is_compatible(const struct device_node *device, ++ const char *); ++extern const void *of_get_property(const struct device_node *node, ++ const char *name, ++ int *lenp); ++#define get_property(node,name,lenp) of_get_property(node,name,lenp) ++extern int of_set_property(struct device_node *node, const char *name, void *val, int len); ++extern int of_getintprop_default(struct device_node *np, ++ const char *name, ++ int def); ++extern int of_n_addr_cells(struct device_node *np); ++extern int of_n_size_cells(struct device_node *np); ++ ++extern void prom_build_devicetree(void); ++ ++#endif /* __KERNEL__ */ ++#endif +diff -purN linux_2.6.24_org/include/linux/battery.h linux_2.6.24_olpc/include/linux/battery.h +--- linux_2.6.24_org/include/linux/battery.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/include/linux/battery.h 2008-02-15 18:58:06.000000000 +0000 +@@ -0,0 +1,101 @@ ++/* ++ * Driver model for batteries ++ * ++ * © 2006 David Woodhouse ++ * ++ * Based on LED Class support, by John Lenz and Richard Purdie: ++ * ++ * © 2005 John Lenz ++ * © 2005-2006 Richard Purdie ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#ifndef __LINUX_BATTERY_H__ ++#define __LINUX_BATTERY_H__ ++ ++struct device; ++struct class_device; ++ ++/* ++ * Battery Core ++ */ ++#define PWRDEV_TYPE_BATTERY 0 ++#define PWRDEV_TYPE_AC 1 ++ ++#define BAT_STAT_PRESENT (1<<0) ++#define BAT_STAT_LOW (1<<1) ++#define BAT_STAT_FULL (1<<2) ++#define BAT_STAT_CHARGING (1<<3) ++#define BAT_STAT_DISCHARGING (1<<4) ++#define BAT_STAT_OVERTEMP (1<<5) ++#define BAT_STAT_CRITICAL (1<<6) ++#define BAT_STAT_FIRE (1<<7) ++#define BAT_STAT_CHARGE_DONE (1<<8) ++ ++/* Thou shalt not export any attributes in sysfs except these, and ++ with these units: */ ++#define BAT_INFO_STATUS "status" /* Not free-form. Use ++ provided function */ ++#define BAT_INFO_TEMP1 "temp1" /* °C/1000 */ ++#define BAT_INFO_TEMP1_NAME "temp1_name" /* string */ ++ ++#define BAT_INFO_TEMP2 "temp2" /* °C/1000 */ ++#define BAT_INFO_TEMP2_NAME "temp2_name" /* string */ ++ ++#define BAT_INFO_VOLTAGE "voltage" /* mV */ ++#define BAT_INFO_VOLTAGE_DESIGN "voltage_design" /* mV */ ++ ++#define BAT_INFO_CURRENT "current" /* mA */ ++#define BAT_INFO_CURRENT_NOW "current_now" /* mA */ ++ ++#define BAT_INFO_POWER "power" /* mW */ ++#define BAT_INFO_POWER_NOW "power_now" /* mW */ ++ ++/* The following capacity/charge properties are represented in either ++ mA or mW. The CAP_UNITS property MUST be provided if any of these are. */ ++#define BAT_INFO_RATE "rate" /* CAP_UNITS */ ++#define BAT_INFO_CAP_LEFT "capacity_left" /* CAP_UNITS*h */ ++#define BAT_INFO_CAP_DESIGN "capacity_design" /* CAP_UNITS*h */ ++#define BAT_INFO_CAP_LAST_FULL "capacity_last_full" /* CAP_UNITS*h */ ++#define BAT_INFO_CAP_LOW "capacity_low_thresh" /* CAP_UNITS*h */ ++#define BAT_INFO_CAP_WARN "capacity_warn_thresh" /* CAP_UNITS*h */ ++#define BAT_INFO_CAP_UNITS "capacity_units" /* string: must be ++ either mA or mW */ ++ ++#define BAT_INFO_CAP_PCT "capacity_percentage" /* integer */ ++ ++#define BAT_INFO_TIME_EMPTY "time_to_empty" /* seconds */ ++#define BAT_INFO_TIME_EMPTY_NOW "time_to_empty_now" /* seconds */ ++#define BAT_INFO_TIME_FULL "time_to_full" /* seconds */ ++#define BAT_INFO_TIME_FULL_NOW "time_to_full_now" /* seconds */ ++ ++#define BAT_INFO_MANUFACTURER "manufacturer" /* string */ ++#define BAT_INFO_TECHNOLOGY "technology" /* string */ ++#define BAT_INFO_MODEL "model" /* string */ ++#define BAT_INFO_SERIAL "serial" /* string */ ++#define BAT_INFO_OEM_INFO "oem_info" /* string */ ++ ++#define BAT_INFO_CYCLE_COUNT "cycle_count" /* integer */ ++#define BAT_INFO_DATE_MFR "date_manufactured" /* YYYY[-MM[-DD]] */ ++#define BAT_INFO_DATE_FIRST_USE "date_first_use" /* YYYY[-MM[-DD]] */ ++ ++struct battery_dev { ++ int status_cap; ++ int id; ++ int type; ++ const char *name; ++ ++ struct device *dev; ++}; ++ ++int battery_device_register(struct device *parent, ++ struct battery_dev *battery_cdev); ++void battery_device_unregister(struct battery_dev *battery_cdev); ++ ++ ++ssize_t battery_attribute_show_status(char *buf, unsigned long status); ++ssize_t battery_attribute_show_ac_status(char *buf, unsigned long status); ++#endif /* __LINUX_BATTERY_H__ */ +diff -purN linux_2.6.24_org/include/linux/fb.h linux_2.6.24_olpc/include/linux/fb.h +--- linux_2.6.24_org/include/linux/fb.h 2008-02-15 20:10:55.000000000 +0000 ++++ linux_2.6.24_olpc/include/linux/fb.h 2008-02-15 18:58:01.000000000 +0000 +@@ -666,6 +666,12 @@ struct fb_ops { + /* restore saved state */ + void (*fb_restore_state)(struct fb_info *info); + ++ /* Shut down the graphics engine to save power */ ++ int (*fb_powerdown)(struct fb_info *info); ++ ++ /* Power it back up */ ++ int (*fb_powerup)(struct fb_info *info); ++ + /* get capability given var */ + void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps, + struct fb_var_screeninfo *var); +@@ -945,6 +951,9 @@ extern int fb_get_color_depth(struct fb_ + extern int fb_get_options(char *name, char **option); + extern int fb_new_modelist(struct fb_info *info); + ++extern int fb_powerdown(struct fb_info *info); ++extern int fb_powerup(struct fb_info *info); ++ + extern struct fb_info *registered_fb[FB_MAX]; + extern int num_registered_fb; + extern struct class *fb_class; +diff -purN linux_2.6.24_org/include/linux/i2c-id.h linux_2.6.24_olpc/include/linux/i2c-id.h +--- linux_2.6.24_org/include/linux/i2c-id.h 2008-02-15 20:10:52.000000000 +0000 ++++ linux_2.6.24_olpc/include/linux/i2c-id.h 2008-02-15 18:58:00.000000000 +0000 +@@ -125,6 +125,7 @@ + #define I2C_DRIVERID_LM4857 92 /* LM4857 Audio Amplifier */ + #define I2C_DRIVERID_VP27SMPX 93 /* Panasonic VP27s tuner internal MPX */ + #define I2C_DRIVERID_CS4270 94 /* Cirrus Logic 4270 audio codec */ ++#define I2C_DRIVERID_DCON 95 + + #define I2C_DRIVERID_I2CDEV 900 + #define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */ +diff -purN linux_2.6.24_org/include/linux/isl_38xx.h linux_2.6.24_olpc/include/linux/isl_38xx.h +--- linux_2.6.24_org/include/linux/isl_38xx.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/include/linux/isl_38xx.h 2008-02-15 18:58:05.000000000 +0000 +@@ -0,0 +1,127 @@ ++/* ++ * Copyright (C) 2002 Intersil Americas Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _LINUX_ISL_38XX_H ++#define _LINUX_ISL_38XX_H ++ ++#include ++ ++#define ISL38XX_CB_RX_QSIZE 8 ++#define ISL38XX_CB_TX_QSIZE 32 ++ ++/* ISL38XX Access Point Specific definitions */ ++#define ISL38XX_MAX_WDS_LINKS 8 ++ ++/* ISL38xx Client Specific definitions */ ++#define ISL38XX_PSM_ACTIVE_STATE 0 ++#define ISL38XX_PSM_POWERSAVE_STATE 1 ++ ++/* ISL38XX Host Interface Definitions */ ++#define ISL38XX_PCI_MEM_SIZE 0x02000 ++#define ISL38XX_MEMORY_WINDOW_SIZE 0x01000 ++#define ISL38XX_DEV_FIRMWARE_ADDRES 0x20000 ++#define ISL38XX_WRITEIO_DELAY 10 /* in us */ ++#define ISL38XX_RESET_DELAY 50 /* in ms */ ++#define ISL38XX_WAIT_CYCLE 10 /* in 10ms */ ++#define ISL38XX_MAX_WAIT_CYCLES 10 ++ ++/* PCI Memory Area */ ++#define ISL38XX_HARDWARE_REG 0x0000 ++#define ISL38XX_CARDBUS_CIS 0x0800 ++#define ISL38XX_DIRECT_MEM_WIN 0x1000 ++ ++/* Hardware registers */ ++#define ISL38XX_DEV_INT_REG 0x0000 ++#define ISL38XX_INT_IDENT_REG 0x0010 ++#define ISL38XX_INT_ACK_REG 0x0014 ++#define ISL38XX_INT_EN_REG 0x0018 ++#define ISL38XX_GEN_PURP_COM_REG_1 0x0020 ++#define ISL38XX_GEN_PURP_COM_REG_2 0x0024 ++#define ISL38XX_CTRL_BLK_BASE_REG ISL38XX_GEN_PURP_COM_REG_1 ++#define ISL38XX_DIR_MEM_BASE_REG 0x0030 ++#define ISL38XX_CTRL_STAT_REG 0x0078 ++ ++/* High end mobos queue up pci writes, the following ++ * is used to "read" from after a write to force flush */ ++#define ISL38XX_PCI_POSTING_FLUSH ISL38XX_INT_EN_REG ++ ++/** ++ * isl38xx_w32_flush - PCI iomem write helper ++ * @base: (host) memory base address of the device ++ * @val: 32bit value (host order) to write ++ * @offset: byte offset into @base to write value to ++ * ++ * This helper takes care of writing a 32bit datum to the ++ * specified offset into the device's pci memory space, and making sure ++ * the pci memory buffers get flushed by performing one harmless read ++ * from the %ISL38XX_PCI_POSTING_FLUSH offset. ++ */ ++static inline void ++isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset) ++{ ++ writel(val, base + offset); ++ (void) readl(base + ISL38XX_PCI_POSTING_FLUSH); ++} ++ ++/* Device Interrupt register bits */ ++#define ISL38XX_DEV_INT_RESET 0x0001 ++#define ISL38XX_DEV_INT_UPDATE 0x0002 ++#define ISL38XX_DEV_INT_WAKEUP 0x0008 ++#define ISL38XX_DEV_INT_SLEEP 0x0010 ++#define ISL38XX_DEV_INT_ABORT 0x0020 ++/* thos two only used in USB */ ++#define ISL38XX_DEV_INT_DATA 0x0040 ++#define ISL38XX_DEV_INT_MGMT 0x0080 ++ ++#define ISL38XX_DEV_INT_PCIUART_CTS 0x4000 ++#define ISL38XX_DEV_INT_PCIUART_DR 0x8000 ++ ++/* Interrupt Identification/Acknowledge/Enable register bits */ ++#define ISL38XX_INT_IDENT_UPDATE 0x0002 ++#define ISL38XX_INT_IDENT_INIT 0x0004 ++#define ISL38XX_INT_IDENT_WAKEUP 0x0008 ++#define ISL38XX_INT_IDENT_SLEEP 0x0010 ++#define ISL38XX_INT_IDENT_PCIUART_CTS 0x4000 ++#define ISL38XX_INT_IDENT_PCIUART_DR 0x8000 ++ ++#define ISL38XX_INT_SOURCES (ISL38XX_INT_IDENT_UPDATE | \ ++ ISL38XX_INT_IDENT_INIT | \ ++ ISL38XX_INT_IDENT_WAKEUP | \ ++ ISL38XX_INT_IDENT_SLEEP | \ ++ ISL38XX_INT_IDENT_PCIUART_CTS | \ ++ ISL38XX_INT_IDENT_PCIUART_DR) ++ ++/* Control/Status register bits */ ++/* Looks like there are other meaningful bits ++ 0x20004400 seen in normal operation, ++ 0x200044db at 'timeout waiting for mgmt response' ++*/ ++#define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200 ++#define ISL38XX_CTRL_STAT_CLKRUN 0x00800000 ++#define ISL38XX_CTRL_STAT_RESET 0x10000000 ++#define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000 ++#define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000 ++#define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000 ++ ++/* Some flags for the isl hardware registers controlling DMA inside the ++ * chip */ ++#define ISL38XX_DMA_STATUS_DONE 0x00000001 ++#define ISL38XX_DMA_STATUS_READY 0x00000002 ++#define NET2280_EPA_FIFO_PCI_ADDR 0x20000000 ++#define ISL38XX_DMA_MASTER_CONTROL_TRIGGER 0x00000004 ++ ++#endif /* _LINUX_ISL_38XX_H */ +diff -purN linux_2.6.24_org/include/linux/pm.h linux_2.6.24_olpc/include/linux/pm.h +--- linux_2.6.24_org/include/linux/pm.h 2008-02-15 20:11:06.000000000 +0000 ++++ linux_2.6.24_olpc/include/linux/pm.h 2008-02-15 18:58:06.000000000 +0000 +@@ -178,6 +178,9 @@ struct dev_pm_info { + unsigned can_wakeup:1; + #ifdef CONFIG_PM_SLEEP + unsigned should_wakeup:1; ++ pm_message_t prev_state; ++ void * saved_state; ++ struct device * pm_parent; + struct list_head entry; + #endif + }; +diff -purN linux_2.6.24_org/include/linux/power_supply.h linux_2.6.24_olpc/include/linux/power_supply.h +--- linux_2.6.24_org/include/linux/power_supply.h 2008-02-15 20:10:55.000000000 +0000 ++++ linux_2.6.24_olpc/include/linux/power_supply.h 2008-02-15 18:58:01.000000000 +0000 +@@ -98,9 +98,11 @@ enum power_supply_property { + POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, + POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, ++ POWER_SUPPLY_PROP_ACCUM_CURRENT, + /* Properties of type `const char *' */ + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER, ++ POWER_SUPPLY_PROP_SERIAL_NUMBER, + }; + + enum power_supply_type { +@@ -169,9 +171,10 @@ struct power_supply_info { + + extern void power_supply_changed(struct power_supply *psy); + extern int power_supply_am_i_supplied(struct power_supply *psy); ++extern void power_supply_status_changed(struct power_supply *psy); + + extern int power_supply_register(struct device *parent, +- struct power_supply *psy); ++ struct power_supply *psy); + extern void power_supply_unregister(struct power_supply *psy); + + /* For APM emulation, think legacy userspace. */ +diff -purN linux_2.6.24_org/include/linux/vt_kern.h linux_2.6.24_olpc/include/linux/vt_kern.h +--- linux_2.6.24_org/include/linux/vt_kern.h 2008-02-15 20:10:55.000000000 +0000 ++++ linux_2.6.24_olpc/include/linux/vt_kern.h 2008-02-15 18:58:02.000000000 +0000 +@@ -96,4 +96,23 @@ struct vt_spawn_console { + }; + extern struct vt_spawn_console vt_spawn_con; + ++/* A notifier list for console events */ ++extern struct raw_notifier_head console_notifier_list; ++ ++/* Called when the FG console switches to KD_TEXT mode */ ++#define CONSOLE_EVENT_SWITCH_TEXT 0x01 ++ ++/* Called when the FG console switches to KD_GRAPHICS mode */ ++#define CONSOLE_EVENT_SWITCH_GRAPHICS 0x02 ++ ++static inline int console_event_register(struct notifier_block *n) ++{ ++ return raw_notifier_chain_register(&console_notifier_list, n); ++} ++ ++static inline int console_event_unregister(struct notifier_block *n) ++{ ++ return raw_notifier_chain_unregister(&console_notifier_list, n); ++} ++ + #endif /* _VT_KERN_H */ +diff -purN linux_2.6.24_org/include/sound/ac97_codec.h linux_2.6.24_olpc/include/sound/ac97_codec.h +--- linux_2.6.24_org/include/sound/ac97_codec.h 2008-02-15 20:10:44.000000000 +0000 ++++ linux_2.6.24_olpc/include/sound/ac97_codec.h 2008-02-15 18:57:45.000000000 +0000 +@@ -281,10 +281,12 @@ + /* specific - Analog Devices */ + #define AC97_AD_TEST 0x5a /* test register */ + #define AC97_AD_TEST2 0x5c /* undocumented test register 2 */ ++#define AC97_AD_HPFD_SHIFT 12 /* High Pass Filter Disable */ + #define AC97_AD_CODEC_CFG 0x70 /* codec configuration */ + #define AC97_AD_JACK_SPDIF 0x72 /* Jack Sense & S/PDIF */ + #define AC97_AD_SERIAL_CFG 0x74 /* Serial Configuration */ + #define AC97_AD_MISC 0x76 /* Misc Control Bits */ ++#define AC97_AD_VREFD_SHIFT 2 /* V_REFOUT Disable (AD1888) */ + + /* specific - Cirrus Logic */ + #define AC97_CSR_ACMODE 0x5e /* AC Mode Register */ +diff -purN linux_2.6.24_org/kernel/power/console.c linux_2.6.24_olpc/kernel/power/console.c +--- linux_2.6.24_org/kernel/power/console.c 2008-02-15 20:12:34.000000000 +0000 ++++ linux_2.6.24_olpc/kernel/power/console.c 2008-02-15 19:00:00.000000000 +0000 +@@ -9,7 +9,7 @@ + #include + #include "power.h" + +-#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) ++#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) && !defined(CONFIG_DISABLE_SUSPEND_VT_SWITCH) + #define SUSPEND_CONSOLE (MAX_NR_CONSOLES-1) + + static int orig_fgconsole, orig_kmsg; +diff -purN linux_2.6.24_org/kernel/power/Kconfig linux_2.6.24_olpc/kernel/power/Kconfig +--- linux_2.6.24_org/kernel/power/Kconfig 2008-02-15 20:12:34.000000000 +0000 ++++ linux_2.6.24_olpc/kernel/power/Kconfig 2008-02-15 19:00:00.000000000 +0000 +@@ -37,9 +37,22 @@ config PM_DEBUG + code. This is helpful when debugging and reporting PM bugs, like + suspend support. + ++config DISABLE_SUSPEND_VT_SWITCH ++ bool "Disable the console switch prior to suspend (DANGEROUS)" ++ depends on PM_DEBUG ++ default n ++ ---help--- ++ This option disables the automatic switch to VT console that happens ++ prior to Linux going into a suspend/sleep. Your video card/framebuffer ++ must be able to properly restore the display (even if X is doing ++ something crazy!) in this scenario. This is useful for saving ++ precious milliseconds during suspend and resume. ++ ++ If unsure, say N. ++ + config PM_VERBOSE + bool "Verbose Power Management debugging" +- depends on PM_DEBUG ++ depends on VT_CONSOLE && PM && EXPERIMENTAL + default n + ---help--- + This option enables verbose messages from the Power Management code. +diff -purN linux_2.6.24_org/kernel/power/main.c linux_2.6.24_olpc/kernel/power/main.c +--- linux_2.6.24_org/kernel/power/main.c 2008-02-15 20:12:34.000000000 +0000 ++++ linux_2.6.24_olpc/kernel/power/main.c 2008-02-15 19:00:00.000000000 +0000 +@@ -76,11 +76,13 @@ static int suspend_prepare(void) + if (!suspend_ops || !suspend_ops->enter) + return -EPERM; + ++#ifndef CONFIG_OLPC_PM + error = pm_notifier_call_chain(PM_SUSPEND_PREPARE); + if (error) + goto Finish; + + pm_prepare_console(); ++#endif + + if (freeze_processes()) { + error = -EAGAIN; +diff -purN linux_2.6.24_org/scripts/kconfig/conf.c linux_2.6.24_olpc/scripts/kconfig/conf.c +--- linux_2.6.24_org/scripts/kconfig/conf.c 2008-02-15 20:10:15.000000000 +0000 ++++ linux_2.6.24_olpc/scripts/kconfig/conf.c 2008-02-15 18:57:09.000000000 +0000 +@@ -22,6 +22,7 @@ enum { + ask_new, + ask_silent, + set_default, ++ set_silentdefault, + set_yes, + set_mod, + set_no, +@@ -64,10 +65,11 @@ static void strip(char *str) + + static void check_stdin(void) + { +- if (!valid_stdin && input_mode == ask_silent) { ++ if (!valid_stdin && (input_mode == ask_silent || ++ input_mode == set_silentdefault)) { + printf(_("aborted!\n\n")); + printf(_("Console input/output is redirected. ")); +- printf(_("Run 'make oldconfig' to update configuration.\n\n")); ++ printf(_("Configuration file needs to be updated.\n\n")); + exit(1); + } + } +@@ -102,6 +104,7 @@ static int conf_askvalue(struct symbol * + break; + case ask_new: + case ask_silent: ++ case set_silentdefault: + if (sym_has_value(sym)) { + printf("%s\n", def); + return 0; +@@ -352,6 +355,7 @@ static int conf_choice(struct menu *menu + switch (input_mode) { + case ask_new: + case ask_silent: ++ case set_silentdefault: + if (!is_new) { + cnt = def; + printf("%d\n", cnt); +@@ -424,7 +428,9 @@ static void conf(struct menu *menu) + + switch (prop->type) { + case P_MENU: +- if (input_mode == ask_silent && rootEntry != menu) { ++ if ((input_mode == ask_silent || ++ input_mode == set_silentdefault) && ++ rootEntry != menu) { + check_conf(menu); + return; + } +@@ -508,6 +514,16 @@ int main(int ac, char **av) + input_mode = ask_silent; + valid_stdin = isatty(0) && isatty(1) && isatty(2); + break; ++ case 'S': ++ input_mode = set_silentdefault; ++ valid_stdin = isatty(0) && isatty(1) && isatty(2); ++ defconfig_file = av[i++]; ++ if (!defconfig_file) { ++ printf("%s: No default config file specified\n", ++ av[0]); ++ exit(1); ++ } ++ break; + case 'd': + input_mode = set_default; + break; +@@ -557,6 +573,14 @@ int main(int ac, char **av) + exit(1); + } + break; ++ case set_silentdefault: ++ if (conf_read(defconfig_file)) { ++ printf("***\n" ++ "*** Can't find default configuration \"%s\"!\n" ++ "***\n", defconfig_file); ++ exit(1); ++ } ++ break; + case ask_silent: + if (stat(".config", &tmpstat)) { + printf(_("***\n" +@@ -597,7 +621,7 @@ int main(int ac, char **av) + break; + } + +- if (input_mode != ask_silent) { ++ if (input_mode != ask_silent && input_mode != set_silentdefault) { + rootEntry = &rootmenu; + conf(&rootmenu); + if (input_mode == ask_all) { +@@ -610,19 +634,21 @@ int main(int ac, char **av) + fprintf(stderr, _("\n*** Kernel configuration requires explicit update.\n\n")); + return 1; + } +- } else ++ } else if (input_mode != set_silentdefault) + goto skip_check; + + do { + conf_cnt = 0; + check_conf(&rootmenu); + } while (conf_cnt); +- if (conf_write(NULL)) { ++ if (conf_write(NULL, input_mode == ask_silent || ++ input_mode == set_silentdefault)) { + fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); + return 1; + } + skip_check: +- if (input_mode == ask_silent && conf_write_autoconf()) { ++ if ((input_mode == ask_silent || input_mode == set_silentdefault) && ++ conf_write_autoconf()) { + fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); + return 1; + } +diff -purN linux_2.6.24_org/scripts/kconfig/confdata.c linux_2.6.24_olpc/scripts/kconfig/confdata.c +--- linux_2.6.24_org/scripts/kconfig/confdata.c 2008-02-15 20:10:15.000000000 +0000 ++++ linux_2.6.24_olpc/scripts/kconfig/confdata.c 2008-02-15 18:57:09.000000000 +0000 +@@ -393,7 +393,7 @@ int conf_read(const char *name) + return 0; + } + +-int conf_write(const char *name) ++int conf_write(const char *name, int quiet) + { + FILE *out; + struct symbol *sym; +@@ -548,9 +548,10 @@ int conf_write(const char *name) + return 1; + } + +- printf(_("#\n" +- "# configuration written to %s\n" +- "#\n"), newname); ++ if (!quiet) ++ printf("#\n" ++ "# configuration written to %s\n" ++ "#\n", newname); + + sym_set_change_count(0); + +diff -purN linux_2.6.24_org/scripts/kconfig/gconf.c linux_2.6.24_olpc/scripts/kconfig/gconf.c +--- linux_2.6.24_org/scripts/kconfig/gconf.c 2008-02-15 20:10:15.000000000 +0000 ++++ linux_2.6.24_olpc/scripts/kconfig/gconf.c 2008-02-15 18:57:09.000000000 +0000 +@@ -621,7 +621,7 @@ void on_load1_activate(GtkMenuItem * men + + void on_save_activate(GtkMenuItem * menuitem, gpointer user_data) + { +- if (conf_write(NULL)) ++ if (conf_write(NULL, 0)) + text_insert_msg(_("Error"), _("Unable to save configuration !")); + } + +@@ -634,7 +634,7 @@ store_filename(GtkFileSelection * file_s + fn = gtk_file_selection_get_filename(GTK_FILE_SELECTION + (user_data)); + +- if (conf_write(fn)) ++ if (conf_write(fn, 0)) + text_insert_msg(_("Error"), _("Unable to save configuration !")); + + gtk_widget_destroy(GTK_WIDGET(user_data)); +diff -purN linux_2.6.24_org/scripts/kconfig/lkc_proto.h linux_2.6.24_olpc/scripts/kconfig/lkc_proto.h +--- linux_2.6.24_org/scripts/kconfig/lkc_proto.h 2008-02-15 20:10:15.000000000 +0000 ++++ linux_2.6.24_olpc/scripts/kconfig/lkc_proto.h 2008-02-15 18:57:09.000000000 +0000 +@@ -3,7 +3,7 @@ + P(conf_parse,void,(const char *name)); + P(conf_read,int,(const char *name)); + P(conf_read_simple,int,(const char *name, int)); +-P(conf_write,int,(const char *name)); ++P(conf_write,int,(const char *name, int)); + P(conf_write_autoconf,int,(void)); + P(conf_get_changed,bool,(void)); + P(conf_set_changed_callback, void,(void (*fn)(void))); +diff -purN linux_2.6.24_org/scripts/kconfig/Makefile linux_2.6.24_olpc/scripts/kconfig/Makefile +--- linux_2.6.24_org/scripts/kconfig/Makefile 2008-02-15 20:10:15.000000000 +0000 ++++ linux_2.6.24_olpc/scripts/kconfig/Makefile 2008-02-15 18:57:09.000000000 +0000 +@@ -69,6 +69,9 @@ endif + %_defconfig: $(obj)/conf + $(Q)$< -D arch/$(SRCARCH)/configs/$@ $(Kconfig) + ++%_silentdefconfig: $(obj)/conf ++ $(Q)$< -S arch/$(ARCH)/configs/$(subst _silentdefconfig,_defconfig,$@) arch/$(ARCH)/Kconfig ++ + # Help text used by make help + help: + @echo ' config - Update current config utilising a line-oriented program' +Binary files linux_2.6.24_org/scripts/kconfig/mconf and linux_2.6.24_olpc/scripts/kconfig/mconf differ +diff -purN linux_2.6.24_org/scripts/kconfig/mconf.c linux_2.6.24_olpc/scripts/kconfig/mconf.c +--- linux_2.6.24_org/scripts/kconfig/mconf.c 2008-02-15 20:10:15.000000000 +0000 ++++ linux_2.6.24_olpc/scripts/kconfig/mconf.c 2008-02-15 18:57:09.000000000 +0000 +@@ -885,7 +885,7 @@ static void conf_save(void) + case 0: + if (!dialog_input_result[0]) + return; +- if (!conf_write(dialog_input_result)) { ++ if (!conf_write(dialog_input_result, 0)) { + set_config_filename(dialog_input_result); + return; + } +@@ -945,7 +945,7 @@ int main(int ac, char **av) + + switch (res) { + case 0: +- if (conf_write(filename)) { ++ if (conf_write(filename, 0)) { + fprintf(stderr, _("\n\n" + "Error during writing of the kernel configuration.\n" + "Your kernel configuration changes were NOT saved." +diff -purN linux_2.6.24_org/scripts/kconfig/qconf.cc linux_2.6.24_olpc/scripts/kconfig/qconf.cc +--- linux_2.6.24_org/scripts/kconfig/qconf.cc 2008-02-15 20:10:15.000000000 +0000 ++++ linux_2.6.24_olpc/scripts/kconfig/qconf.cc 2008-02-15 18:57:09.000000000 +0000 +@@ -1458,7 +1458,7 @@ void ConfigMainWindow::loadConfig(void) + + void ConfigMainWindow::saveConfig(void) + { +- if (conf_write(NULL)) ++ if (conf_write(NULL, 0)) + QMessageBox::information(this, "qconf", "Unable to save configuration!"); + } + +@@ -1467,7 +1467,7 @@ void ConfigMainWindow::saveConfigAs(void + QString s = QFileDialog::getSaveFileName(".config", NULL, this); + if (s.isNull()) + return; +- if (conf_write(QFile::encodeName(s))) ++ if (conf_write(QFile::encodeName(s), 0)) + QMessageBox::information(this, "qconf", "Unable to save configuration!"); + } + +@@ -1619,7 +1619,7 @@ void ConfigMainWindow::closeEvent(QClose + mb.setButtonText(QMessageBox::Cancel, "Cancel Exit"); + switch (mb.exec()) { + case QMessageBox::Yes: +- conf_write(NULL); ++ conf_write(NULL, 0); + case QMessageBox::No: + e->accept(); + break; +diff -purN linux_2.6.24_org/sound/pci/ac97/ac97_patch.c linux_2.6.24_olpc/sound/pci/ac97/ac97_patch.c +--- linux_2.6.24_org/sound/pci/ac97/ac97_patch.c 2008-02-15 20:10:24.000000000 +0000 ++++ linux_2.6.24_olpc/sound/pci/ac97/ac97_patch.c 2008-02-15 18:57:24.000000000 +0000 +@@ -2029,8 +2029,9 @@ static const struct snd_kcontrol_new snd + .get = snd_ac97_ad1888_lohpsel_get, + .put = snd_ac97_ad1888_lohpsel_put + }, +- AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, 2, 1, 1), +- AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, 12, 1, 1), ++ AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, AC97_AD_VREFD_SHIFT, 1, 1), ++ AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, ++ AC97_AD_HPFD_SHIFT, 1, 1), + AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, +diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.c linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.c +--- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.c 2008-02-15 20:10:23.000000000 +0000 ++++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.c 2008-02-15 18:57:23.000000000 +0000 +@@ -145,7 +145,7 @@ static unsigned short snd_cs5535audio_ac + return snd_cs5535audio_codec_read(cs5535au, reg); + } + +-static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au) ++static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au) + { + struct snd_card *card = cs5535au->card; + struct snd_ac97_bus *pbus; +@@ -160,10 +160,14 @@ static int snd_cs5535audio_mixer(struct + return err; + + memset(&ac97, 0, sizeof(ac97)); +- ac97.scaps = AC97_SCAP_AUDIO|AC97_SCAP_SKIP_MODEM; ++ ac97.scaps = AC97_SCAP_AUDIO | AC97_SCAP_SKIP_MODEM ++ | AC97_SCAP_POWER_SAVE; + ac97.private_data = cs5535au; + ac97.pci = cs5535au->pci; + ++ /* olpc_prequirks is dummied out if not olpc */ ++ olpc_prequirks(card, &ac97); ++ + if ((err = snd_ac97_mixer(pbus, &ac97, &cs5535au->ac97)) < 0) { + snd_printk(KERN_ERR "mixer failed\n"); + return err; +@@ -171,6 +175,12 @@ static int snd_cs5535audio_mixer(struct + + snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk); + ++ /* olpc_quirks is dummied out if not olpc */ ++ if (( err = olpc_quirks(card, cs5535au->ac97)) < 0) { ++ snd_printk(KERN_ERR "olpc quirks failed\n"); ++ return err; ++ } ++ + return 0; + } + +diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.h linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.h +--- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.h 2008-02-15 20:10:23.000000000 +0000 ++++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.h 2008-02-15 18:57:23.000000000 +0000 +@@ -78,6 +78,7 @@ struct cs5535audio_dma { + unsigned int buf_addr, buf_bytes; + unsigned int period_bytes, periods; + u32 saved_prd; ++ int pcm_open_flag; + }; + + struct cs5535audio { +@@ -93,8 +94,21 @@ struct cs5535audio { + struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS]; + }; + ++#ifdef CONFIG_PM + int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state); + int snd_cs5535audio_resume(struct pci_dev *pci); ++#endif ++ ++#ifdef CONFIG_OLPC ++void olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97) __devinit; ++int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) __devinit; ++int olpc_ai_enable(struct snd_ac97 *ac97, u8 val); ++#else ++#define olpc_prequirks(arg,arg2) do {} while (0) ++#define olpc_quirks(arg,arg2) (0) ++#define olpc_ai_enable(a, v) (0) ++#endif ++ + int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio); + + #endif /* __SOUND_CS5535AUDIO_H */ +diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_olpc.c linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_olpc.c +--- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_olpc.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_olpc.c 2008-02-15 18:57:23.000000000 +0000 +@@ -0,0 +1,110 @@ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include "cs5535audio.h" ++ ++/* ++ * OLPC has an additional feature on top of the regular AD1888 codec features. ++ * It has an Analog Input mode that is switched into (after disabling the ++ * High Pass Filter) via GPIO. It is only supported on B2 and later models. ++ */ ++ ++int olpc_ai_enable(struct snd_ac97 *ac97, u8 val) ++{ ++ int err; ++ ++ /* ++ * update the High Pass Filter (via AC97_AD_TEST2), and then set ++ * Analog Input mode through a GPIO. ++ */ ++ ++ if (val) { ++ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2, ++ 1<type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 1; ++ return 0; ++} ++ ++static int snd_cs5535audio_ai_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ ucontrol->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC, ++ GPIO_OUTPUT_VAL); ++ return 0; ++} ++ ++static int snd_cs5535audio_ai_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol); ++ struct snd_ac97 *ac97 = cs5535au->ac97; ++ ++ olpc_ai_enable(ac97, ucontrol->value.integer.value[0]); ++ ++ return 1; ++} ++ ++static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata = ++{ ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "DC Mode Enable", ++ .info = snd_cs5535audio_ai_info, ++ .get = snd_cs5535audio_ai_get, ++ .put = snd_cs5535audio_ai_put, ++ .private_value = 0 ++}; ++ ++void __devinit olpc_prequirks(struct snd_card *card, ++ struct snd_ac97_template *ac97) ++{ ++ /* Bail if this isn't an OLPC platform */ ++ if (!machine_is_olpc()) ++ return; ++ ++ /* If on an OLPC B3 or higher, invert EAPD. */ ++ if (olpc_board_at_least(olpc_board_pre(0xb3))) ++ ac97->scaps |= AC97_SCAP_INV_EAPD; ++} ++ ++int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) ++{ ++ struct snd_ctl_elem_id elem; ++ ++ /* Bail if this isn't an OLPC platform */ ++ if (!machine_is_olpc()) ++ return 0; ++ ++ /* drop the original ad1888 HPF control */ ++ memset(&elem, 0, sizeof(elem)); ++ elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER; ++ strcpy(elem.name, "High Pass Filter Enable"); ++ snd_ctl_remove_id(card, &elem); ++ ++ /* add the override for OLPC's HPF */ ++ return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls, ++ ac97->private_data)); ++} +diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_pcm.c linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_pcm.c +--- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_pcm.c 2008-02-15 20:10:23.000000000 +0000 ++++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_pcm.c 2008-02-15 18:57:23.000000000 +0000 +@@ -259,6 +259,9 @@ static int snd_cs5535audio_hw_params(str + err = cs5535audio_build_dma_packets(cs5535au, dma, substream, + params_periods(hw_params), + params_period_bytes(hw_params)); ++ if (!err) ++ dma->pcm_open_flag = 1; ++ + return err; + } + +@@ -267,6 +270,15 @@ static int snd_cs5535audio_hw_free(struc + struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream); + struct cs5535audio_dma *dma = substream->runtime->private_data; + ++ if (dma->pcm_open_flag) { ++ if (substream == cs5535au->playback_substream) ++ snd_ac97_update_power(cs5535au->ac97, ++ AC97_PCM_FRONT_DAC_RATE, 0); ++ else ++ snd_ac97_update_power(cs5535au->ac97, ++ AC97_PCM_LR_ADC_RATE, 0); ++ dma->pcm_open_flag = 0; ++ } + cs5535audio_clear_dma_packets(cs5535au, dma, substream); + return snd_pcm_lib_free_pages(substream); + } +@@ -341,6 +353,7 @@ static int snd_cs5535audio_capture_open( + int err; + struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; ++ struct snd_ac97 *ac97 = cs5535au->ac97; + + runtime->hw = snd_cs5535audio_capture; + cs5535au->capture_substream = substream; +@@ -348,11 +361,29 @@ static int snd_cs5535audio_capture_open( + if ((err = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS)) < 0) + return err; +- return 0; ++ ++#ifdef CONFIG_OLPC ++ /* Disable Analog Input */ ++ olpc_ai_enable(ac97, 0); ++ /* Enable V_ref bias while recording. */ ++ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<ac97; ++ ++ /* Disable Analog Input */ ++ olpc_ai_enable(ac97, 0); ++ /* Disable V_ref bias. */ ++ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<