From: Robert Marko Date: Tue, 19 Oct 2021 18:27:37 +0000 (+0200) Subject: ipq40xx: drop 5.4 kernel X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b8ef54f5da32a654b2f47a2466913faef3ff6bc4;p=openwrt%2Fstaging%2Fnbd.git ipq40xx: drop 5.4 kernel Since 5.10 is now default, no point in keeping 5.4 around. Signed-off-by: Robert Marko --- diff --git a/target/linux/ipq40xx/config-5.4 b/target/linux/ipq40xx/config-5.4 deleted file mode 100644 index b4251a7748..0000000000 --- a/target/linux/ipq40xx/config-5.4 +++ /dev/null @@ -1,463 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_APQ_GCC_8084 is not set -# CONFIG_APQ_MMCC_8084 is not set -CONFIG_AR40XX_PHY=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_IPQ40XX=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -# CONFIG_ARCH_MDM9615 is not set -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -# CONFIG_ARCH_MSM8960 is not set -# CONFIG_ARCH_MSM8974 is not set -# CONFIG_ARCH_MSM8X60 is not set -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_QCOM=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set -CONFIG_ARM_CPUIDLE=y -CONFIG_ARM_CPU_SUSPEND=y -# CONFIG_ARM_CPU_TOPOLOGY is not set -CONFIG_ARM_CRYPTO=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_QCOM_CPUFREQ_HW is not set -# CONFIG_ARM_SMMU is not set -CONFIG_ARM_THUMB=y -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_AT803X_PHY=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BCH=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOUNCE=y -# CONFIG_CACHE_L2X0 is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_QCOM=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE_PARTITION=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_AES_ARM=y -CONFIG_CRYPTO_AES_ARM_BS=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_QCE=y -# CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL is not set -# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set -CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER=y -CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y -CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512 -CONFIG_CRYPTO_DEV_QCOM_RNG=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LIB_DES=y -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA256_ARM=y -CONFIG_CRYPTO_SIMD=y -CONFIG_CRYPTO_XTS=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MISC=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_REMAP=y -CONFIG_DMA_SHARED_BUFFER=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DTC=y -CONFIG_DT_IDLE_STATES=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EEPROM_AT24=y -CONFIG_ESSEDMA=y -CONFIG_EXTCON=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_WATCHDOG=y -CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_SMP=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HWSPINLOCK=y -CONFIG_HWSPINLOCK_QCOM=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_OPTEE=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_QUP=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set -CONFIG_IOMMU_SUPPORT=y -CONFIG_IO_URING=y -CONFIG_IPQ_GCC_4019=y -# CONFIG_IPQ_GCC_806X is not set -# CONFIG_IPQ_GCC_8074 is not set -# CONFIG_IPQ_LCC_806X is not set -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -# CONFIG_KPSS_XCC is not set -# CONFIG_KRAITCC is not set -CONFIG_LEDS_LP5523=y -CONFIG_LEDS_LP5562=y -CONFIG_LEDS_LP55XX_COMMON=y -CONFIG_LEDS_TLC591XX=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_GPIO=y -CONFIG_MDIO_IPQ4019=y -# CONFIG_MDM_GCC_9615 is not set -# CONFIG_MDM_LCC_9615 is not set -CONFIG_MEMFD_CREATE=y -# CONFIG_MFD_QCOM_RPM is not set -# CONFIG_MFD_SPMI_PMIC is not set -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -CONFIG_MMC_SDHCI_MSM=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MSM_GCC_8660 is not set -# CONFIG_MSM_GCC_8916 is not set -# CONFIG_MSM_GCC_8960 is not set -# CONFIG_MSM_GCC_8974 is not set -# CONFIG_MSM_GCC_8994 is not set -# CONFIG_MSM_GCC_8996 is not set -# CONFIG_MSM_GCC_8998 is not set -# CONFIG_MSM_LCC_8960 is not set -# CONFIG_MSM_MMCC_8960 is not set -# CONFIG_MSM_MMCC_8974 is not set -# CONFIG_MSM_MMCC_8996 is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC_SW_BCH=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_NAND_QCOM=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_SPI_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_FIT_FW=y -CONFIG_MTD_SPLIT_WRGG_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NLS=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=4 -CONFIG_NVMEM=y -CONFIG_NVMEM_SYSFS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OPTEE=y -CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1 -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -CONFIG_PCIE_QCOM=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -# CONFIG_PHY_QCOM_APQ8064_SATA is not set -CONFIG_PHY_QCOM_IPQ4019_USB=y -# CONFIG_PHY_QCOM_IPQ806X_SATA is not set -# CONFIG_PHY_QCOM_PCIE2 is not set -# CONFIG_PHY_QCOM_QMP is not set -# CONFIG_PHY_QCOM_QUSB2 is not set -# CONFIG_PHY_QCOM_UFS is not set -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_APQ8064 is not set -# CONFIG_PINCTRL_APQ8084 is not set -CONFIG_PINCTRL_IPQ4019=y -# CONFIG_PINCTRL_IPQ8064 is not set -# CONFIG_PINCTRL_IPQ8074 is not set -# CONFIG_PINCTRL_MDM9615 is not set -CONFIG_PINCTRL_MSM=y -# CONFIG_PINCTRL_MSM8660 is not set -# CONFIG_PINCTRL_MSM8916 is not set -# CONFIG_PINCTRL_MSM8960 is not set -# CONFIG_PINCTRL_MSM8994 is not set -# CONFIG_PINCTRL_MSM8996 is not set -# CONFIG_PINCTRL_MSM8998 is not set -# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set -# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set -# CONFIG_PINCTRL_QCS404 is not set -# CONFIG_PINCTRL_SC7180 is not set -# CONFIG_PINCTRL_SDM660 is not set -# CONFIG_PINCTRL_SDM845 is not set -# CONFIG_PINCTRL_SM8150 is not set -CONFIG_PM_OPP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_MSM=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -CONFIG_PRINTK_TIME=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_QCA807X_PHY=y -CONFIG_QCOM_A53PLL=y -CONFIG_QCOM_BAM_DMA=y -# CONFIG_QCOM_COMMAND_DB is not set -# CONFIG_QCOM_EBI2 is not set -# CONFIG_QCOM_GENI_SE is not set -# CONFIG_QCOM_GSBI is not set -# CONFIG_QCOM_HFPLL is not set -# CONFIG_QCOM_IOMMU is not set -# CONFIG_QCOM_LLCC is not set -# CONFIG_QCOM_PDC is not set -CONFIG_QCOM_PM=y -CONFIG_QCOM_QFPROM=y -# CONFIG_QCOM_RMTFS_MEM is not set -CONFIG_QCOM_SCM=y -CONFIG_QCOM_SCM_32=y -# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set -CONFIG_QCOM_SMEM=y -# CONFIG_QCOM_SMSM is not set -# CONFIG_QCOM_SOCINFO is not set -CONFIG_QCOM_TCSR=y -# CONFIG_QCOM_TSENS is not set -CONFIG_QCOM_WDT=y -# CONFIG_QCS_GCC_404 is not set -# CONFIG_QCS_TURING_404 is not set -# CONFIG_QRTR is not set -CONFIG_RAS=y -CONFIG_RATIONAL=y -CONFIG_REFCOUNT_FULL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_QCOM_SPMI is not set -CONFIG_REGULATOR_VCTRL=y -CONFIG_REGULATOR_VQMMC_IPQ4019=y -CONFIG_RESET_CONTROLLER=y -# CONFIG_RESET_QCOM_AOSS is not set -# CONFIG_RESET_QCOM_PDC is not set -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -# CONFIG_SDM_CAMCC_845 is not set -# CONFIG_SDM_DISPCC_845 is not set -# CONFIG_SDM_GCC_660 is not set -# CONFIG_SDM_GCC_845 is not set -# CONFIG_SDM_GPUCC_845 is not set -# CONFIG_SDM_LPASSCC_845 is not set -# CONFIG_SDM_VIDEOCC_845 is not set -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_MSM=y -CONFIG_SERIAL_MSM_CONSOLE=y -CONFIG_SGL_ALLOC=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -# CONFIG_SM_GCC_8150 is not set -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_QUP=y -CONFIG_SPMI=y -CONFIG_SPMI_MSM_PMIC_ARB=y -# CONFIG_SPMI_PMIC_CLKDIV is not set -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_LEDS=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_TEE=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB=y -CONFIG_USB_COMMON=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/ipq40xx/files-5.4/drivers/net/phy/ar40xx.c b/target/linux/ipq40xx/files-5.4/drivers/net/phy/ar40xx.c deleted file mode 100644 index f7ce42b9ff..0000000000 --- a/target/linux/ipq40xx/files-5.4/drivers/net/phy/ar40xx.c +++ /dev/null @@ -1,1890 +0,0 @@ -/* - * Copyright (c) 2016, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for - * any purpose with or without fee is hereby granted, provided that the - * above copyright notice and this permission notice appear in all copies. - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT - * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "ar40xx.h" - -static struct ar40xx_priv *ar40xx_priv; - -#define MIB_DESC(_s , _o, _n) \ - { \ - .size = (_s), \ - .offset = (_o), \ - .name = (_n), \ - } - -static const struct ar40xx_mib_desc ar40xx_mibs[] = { - MIB_DESC(1, AR40XX_STATS_RXBROAD, "RxBroad"), - MIB_DESC(1, AR40XX_STATS_RXPAUSE, "RxPause"), - MIB_DESC(1, AR40XX_STATS_RXMULTI, "RxMulti"), - MIB_DESC(1, AR40XX_STATS_RXFCSERR, "RxFcsErr"), - MIB_DESC(1, AR40XX_STATS_RXALIGNERR, "RxAlignErr"), - MIB_DESC(1, AR40XX_STATS_RXRUNT, "RxRunt"), - MIB_DESC(1, AR40XX_STATS_RXFRAGMENT, "RxFragment"), - MIB_DESC(1, AR40XX_STATS_RX64BYTE, "Rx64Byte"), - MIB_DESC(1, AR40XX_STATS_RX128BYTE, "Rx128Byte"), - MIB_DESC(1, AR40XX_STATS_RX256BYTE, "Rx256Byte"), - MIB_DESC(1, AR40XX_STATS_RX512BYTE, "Rx512Byte"), - MIB_DESC(1, AR40XX_STATS_RX1024BYTE, "Rx1024Byte"), - MIB_DESC(1, AR40XX_STATS_RX1518BYTE, "Rx1518Byte"), - MIB_DESC(1, AR40XX_STATS_RXMAXBYTE, "RxMaxByte"), - MIB_DESC(1, AR40XX_STATS_RXTOOLONG, "RxTooLong"), - MIB_DESC(2, AR40XX_STATS_RXGOODBYTE, "RxGoodByte"), - MIB_DESC(2, AR40XX_STATS_RXBADBYTE, "RxBadByte"), - MIB_DESC(1, AR40XX_STATS_RXOVERFLOW, "RxOverFlow"), - MIB_DESC(1, AR40XX_STATS_FILTERED, "Filtered"), - MIB_DESC(1, AR40XX_STATS_TXBROAD, "TxBroad"), - MIB_DESC(1, AR40XX_STATS_TXPAUSE, "TxPause"), - MIB_DESC(1, AR40XX_STATS_TXMULTI, "TxMulti"), - MIB_DESC(1, AR40XX_STATS_TXUNDERRUN, "TxUnderRun"), - MIB_DESC(1, AR40XX_STATS_TX64BYTE, "Tx64Byte"), - MIB_DESC(1, AR40XX_STATS_TX128BYTE, "Tx128Byte"), - MIB_DESC(1, AR40XX_STATS_TX256BYTE, "Tx256Byte"), - MIB_DESC(1, AR40XX_STATS_TX512BYTE, "Tx512Byte"), - MIB_DESC(1, AR40XX_STATS_TX1024BYTE, "Tx1024Byte"), - MIB_DESC(1, AR40XX_STATS_TX1518BYTE, "Tx1518Byte"), - MIB_DESC(1, AR40XX_STATS_TXMAXBYTE, "TxMaxByte"), - MIB_DESC(1, AR40XX_STATS_TXOVERSIZE, "TxOverSize"), - MIB_DESC(2, AR40XX_STATS_TXBYTE, "TxByte"), - MIB_DESC(1, AR40XX_STATS_TXCOLLISION, "TxCollision"), - MIB_DESC(1, AR40XX_STATS_TXABORTCOL, "TxAbortCol"), - MIB_DESC(1, AR40XX_STATS_TXMULTICOL, "TxMultiCol"), - MIB_DESC(1, AR40XX_STATS_TXSINGLECOL, "TxSingleCol"), - MIB_DESC(1, AR40XX_STATS_TXEXCDEFER, "TxExcDefer"), - MIB_DESC(1, AR40XX_STATS_TXDEFER, "TxDefer"), - MIB_DESC(1, AR40XX_STATS_TXLATECOL, "TxLateCol"), -}; - -static u32 -ar40xx_read(struct ar40xx_priv *priv, int reg) -{ - return readl(priv->hw_addr + reg); -} - -static u32 -ar40xx_psgmii_read(struct ar40xx_priv *priv, int reg) -{ - return readl(priv->psgmii_hw_addr + reg); -} - -static void -ar40xx_write(struct ar40xx_priv *priv, int reg, u32 val) -{ - writel(val, priv->hw_addr + reg); -} - -static u32 -ar40xx_rmw(struct ar40xx_priv *priv, int reg, u32 mask, u32 val) -{ - u32 ret; - - ret = ar40xx_read(priv, reg); - ret &= ~mask; - ret |= val; - ar40xx_write(priv, reg, ret); - return ret; -} - -static void -ar40xx_psgmii_write(struct ar40xx_priv *priv, int reg, u32 val) -{ - writel(val, priv->psgmii_hw_addr + reg); -} - -static void -ar40xx_phy_dbg_write(struct ar40xx_priv *priv, int phy_addr, - u16 dbg_addr, u16 dbg_data) -{ - struct mii_bus *bus = priv->mii_bus; - - mutex_lock(&bus->mdio_lock); - bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr); - bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA, dbg_data); - mutex_unlock(&bus->mdio_lock); -} - -static void -ar40xx_phy_dbg_read(struct ar40xx_priv *priv, int phy_addr, - u16 dbg_addr, u16 *dbg_data) -{ - struct mii_bus *bus = priv->mii_bus; - - mutex_lock(&bus->mdio_lock); - bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr); - *dbg_data = bus->read(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA); - mutex_unlock(&bus->mdio_lock); -} - -static void -ar40xx_phy_mmd_write(struct ar40xx_priv *priv, u32 phy_id, - u16 mmd_num, u16 reg_id, u16 reg_val) -{ - struct mii_bus *bus = priv->mii_bus; - - mutex_lock(&bus->mdio_lock); - bus->write(bus, phy_id, - AR40XX_MII_ATH_MMD_ADDR, mmd_num); - bus->write(bus, phy_id, - AR40XX_MII_ATH_MMD_DATA, reg_id); - bus->write(bus, phy_id, - AR40XX_MII_ATH_MMD_ADDR, - 0x4000 | mmd_num); - bus->write(bus, phy_id, - AR40XX_MII_ATH_MMD_DATA, reg_val); - mutex_unlock(&bus->mdio_lock); -} - -static u16 -ar40xx_phy_mmd_read(struct ar40xx_priv *priv, u32 phy_id, - u16 mmd_num, u16 reg_id) -{ - u16 value; - struct mii_bus *bus = priv->mii_bus; - - mutex_lock(&bus->mdio_lock); - bus->write(bus, phy_id, - AR40XX_MII_ATH_MMD_ADDR, mmd_num); - bus->write(bus, phy_id, - AR40XX_MII_ATH_MMD_DATA, reg_id); - bus->write(bus, phy_id, - AR40XX_MII_ATH_MMD_ADDR, - 0x4000 | mmd_num); - value = bus->read(bus, phy_id, AR40XX_MII_ATH_MMD_DATA); - mutex_unlock(&bus->mdio_lock); - return value; -} - -/* Start of swconfig support */ - -static void -ar40xx_phy_poll_reset(struct ar40xx_priv *priv) -{ - u32 i, in_reset, retries = 500; - struct mii_bus *bus = priv->mii_bus; - - /* Assume RESET was recently issued to some or all of the phys */ - in_reset = GENMASK(AR40XX_NUM_PHYS - 1, 0); - - while (retries--) { - /* 1ms should be plenty of time. - * 802.3 spec allows for a max wait time of 500ms - */ - usleep_range(1000, 2000); - - for (i = 0; i < AR40XX_NUM_PHYS; i++) { - int val; - - /* skip devices which have completed reset */ - if (!(in_reset & BIT(i))) - continue; - - val = mdiobus_read(bus, i, MII_BMCR); - if (val < 0) - continue; - - /* mark when phy is no longer in reset state */ - if (!(val & BMCR_RESET)) - in_reset &= ~BIT(i); - } - - if (!in_reset) - return; - } - - dev_warn(&bus->dev, "Failed to reset all phys! (in_reset: 0x%x)\n", - in_reset); -} - -static void -ar40xx_phy_init(struct ar40xx_priv *priv) -{ - int i; - struct mii_bus *bus; - u16 val; - - bus = priv->mii_bus; - for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) { - ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val); - val &= ~AR40XX_PHY_MANU_CTRL_EN; - ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val); - mdiobus_write(bus, i, - MII_ADVERTISE, ADVERTISE_ALL | - ADVERTISE_PAUSE_CAP | - ADVERTISE_PAUSE_ASYM); - mdiobus_write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL); - mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); - } - - ar40xx_phy_poll_reset(priv); -} - -static void -ar40xx_port_phy_linkdown(struct ar40xx_priv *priv) -{ - struct mii_bus *bus; - int i; - u16 val; - - bus = priv->mii_bus; - for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) { - mdiobus_write(bus, i, MII_CTRL1000, 0); - mdiobus_write(bus, i, MII_ADVERTISE, 0); - mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); - ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val); - val |= AR40XX_PHY_MANU_CTRL_EN; - ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val); - /* disable transmit */ - ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_2, &val); - val &= 0xf00f; - ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_2, val); - } -} - -static void -ar40xx_set_mirror_regs(struct ar40xx_priv *priv) -{ - int port; - - /* reset all mirror registers */ - ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0, - AR40XX_FWD_CTRL0_MIRROR_PORT, - (0xF << AR40XX_FWD_CTRL0_MIRROR_PORT_S)); - for (port = 0; port < AR40XX_NUM_PORTS; port++) { - ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(port), - AR40XX_PORT_LOOKUP_ING_MIRROR_EN, 0); - - ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(port), - AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN, 0); - } - - /* now enable mirroring if necessary */ - if (priv->source_port >= AR40XX_NUM_PORTS || - priv->monitor_port >= AR40XX_NUM_PORTS || - priv->source_port == priv->monitor_port) { - return; - } - - ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0, - AR40XX_FWD_CTRL0_MIRROR_PORT, - (priv->monitor_port << AR40XX_FWD_CTRL0_MIRROR_PORT_S)); - - if (priv->mirror_rx) - ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(priv->source_port), 0, - AR40XX_PORT_LOOKUP_ING_MIRROR_EN); - - if (priv->mirror_tx) - ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(priv->source_port), - 0, AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN); -} - -static int -ar40xx_sw_get_ports(struct switch_dev *dev, struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - u8 ports = priv->vlan_table[val->port_vlan]; - int i; - - val->len = 0; - for (i = 0; i < dev->ports; i++) { - struct switch_port *p; - - if (!(ports & BIT(i))) - continue; - - p = &val->value.ports[val->len++]; - p->id = i; - if ((priv->vlan_tagged & BIT(i)) || - (priv->pvid[i] != val->port_vlan)) - p->flags = BIT(SWITCH_PORT_FLAG_TAGGED); - else - p->flags = 0; - } - return 0; -} - -static int -ar40xx_sw_set_ports(struct switch_dev *dev, struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - u8 *vt = &priv->vlan_table[val->port_vlan]; - int i; - - *vt = 0; - for (i = 0; i < val->len; i++) { - struct switch_port *p = &val->value.ports[i]; - - if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED)) { - if (val->port_vlan == priv->pvid[p->id]) - priv->vlan_tagged |= BIT(p->id); - } else { - priv->vlan_tagged &= ~BIT(p->id); - priv->pvid[p->id] = val->port_vlan; - } - - *vt |= BIT(p->id); - } - return 0; -} - -static int -ar40xx_reg_wait(struct ar40xx_priv *priv, u32 reg, u32 mask, u32 val, - unsigned timeout) -{ - int i; - - for (i = 0; i < timeout; i++) { - u32 t; - - t = ar40xx_read(priv, reg); - if ((t & mask) == val) - return 0; - - usleep_range(1000, 2000); - } - - return -ETIMEDOUT; -} - -static int -ar40xx_mib_op(struct ar40xx_priv *priv, u32 op) -{ - int ret; - - lockdep_assert_held(&priv->mib_lock); - - /* Capture the hardware statistics for all ports */ - ar40xx_rmw(priv, AR40XX_REG_MIB_FUNC, - AR40XX_MIB_FUNC, (op << AR40XX_MIB_FUNC_S)); - - /* Wait for the capturing to complete. */ - ret = ar40xx_reg_wait(priv, AR40XX_REG_MIB_FUNC, - AR40XX_MIB_BUSY, 0, 10); - - return ret; -} - -static void -ar40xx_mib_fetch_port_stat(struct ar40xx_priv *priv, int port, bool flush) -{ - unsigned int base; - u64 *mib_stats; - int i; - u32 num_mibs = ARRAY_SIZE(ar40xx_mibs); - - WARN_ON(port >= priv->dev.ports); - - lockdep_assert_held(&priv->mib_lock); - - base = AR40XX_REG_PORT_STATS_START + - AR40XX_REG_PORT_STATS_LEN * port; - - mib_stats = &priv->mib_stats[port * num_mibs]; - if (flush) { - u32 len; - - len = num_mibs * sizeof(*mib_stats); - memset(mib_stats, 0, len); - return; - } - for (i = 0; i < num_mibs; i++) { - const struct ar40xx_mib_desc *mib; - u64 t; - - mib = &ar40xx_mibs[i]; - t = ar40xx_read(priv, base + mib->offset); - if (mib->size == 2) { - u64 hi; - - hi = ar40xx_read(priv, base + mib->offset + 4); - t |= hi << 32; - } - - mib_stats[i] += t; - } -} - -static int -ar40xx_mib_capture(struct ar40xx_priv *priv) -{ - return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_CAPTURE); -} - -static int -ar40xx_mib_flush(struct ar40xx_priv *priv) -{ - return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_FLUSH); -} - -static int -ar40xx_sw_set_reset_mibs(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - unsigned int len; - int ret; - u32 num_mibs = ARRAY_SIZE(ar40xx_mibs); - - mutex_lock(&priv->mib_lock); - - len = priv->dev.ports * num_mibs * sizeof(*priv->mib_stats); - memset(priv->mib_stats, 0, len); - ret = ar40xx_mib_flush(priv); - - mutex_unlock(&priv->mib_lock); - return ret; -} - -static int -ar40xx_sw_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - priv->vlan = !!val->value.i; - return 0; -} - -static int -ar40xx_sw_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - val->value.i = priv->vlan; - return 0; -} - -static int -ar40xx_sw_set_mirror_rx_enable(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - mutex_lock(&priv->reg_mutex); - priv->mirror_rx = !!val->value.i; - ar40xx_set_mirror_regs(priv); - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static int -ar40xx_sw_get_mirror_rx_enable(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - mutex_lock(&priv->reg_mutex); - val->value.i = priv->mirror_rx; - mutex_unlock(&priv->reg_mutex); - return 0; -} - -static int -ar40xx_sw_set_mirror_tx_enable(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - mutex_lock(&priv->reg_mutex); - priv->mirror_tx = !!val->value.i; - ar40xx_set_mirror_regs(priv); - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static int -ar40xx_sw_get_mirror_tx_enable(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - mutex_lock(&priv->reg_mutex); - val->value.i = priv->mirror_tx; - mutex_unlock(&priv->reg_mutex); - return 0; -} - -static int -ar40xx_sw_set_mirror_monitor_port(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - mutex_lock(&priv->reg_mutex); - priv->monitor_port = val->value.i; - ar40xx_set_mirror_regs(priv); - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static int -ar40xx_sw_get_mirror_monitor_port(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - mutex_lock(&priv->reg_mutex); - val->value.i = priv->monitor_port; - mutex_unlock(&priv->reg_mutex); - return 0; -} - -static int -ar40xx_sw_set_mirror_source_port(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - mutex_lock(&priv->reg_mutex); - priv->source_port = val->value.i; - ar40xx_set_mirror_regs(priv); - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static int -ar40xx_sw_get_mirror_source_port(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - mutex_lock(&priv->reg_mutex); - val->value.i = priv->source_port; - mutex_unlock(&priv->reg_mutex); - return 0; -} - -static int -ar40xx_sw_set_linkdown(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - if (val->value.i == 1) - ar40xx_port_phy_linkdown(priv); - else - ar40xx_phy_init(priv); - - return 0; -} - -static int -ar40xx_sw_set_port_reset_mib(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - int port; - int ret; - - port = val->port_vlan; - if (port >= dev->ports) - return -EINVAL; - - mutex_lock(&priv->mib_lock); - ret = ar40xx_mib_capture(priv); - if (ret) - goto unlock; - - ar40xx_mib_fetch_port_stat(priv, port, true); - -unlock: - mutex_unlock(&priv->mib_lock); - return ret; -} - -static int -ar40xx_sw_get_port_mib(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - u64 *mib_stats; - int port; - int ret; - char *buf = priv->buf; - int i, len = 0; - u32 num_mibs = ARRAY_SIZE(ar40xx_mibs); - - port = val->port_vlan; - if (port >= dev->ports) - return -EINVAL; - - mutex_lock(&priv->mib_lock); - ret = ar40xx_mib_capture(priv); - if (ret) - goto unlock; - - ar40xx_mib_fetch_port_stat(priv, port, false); - - len += snprintf(buf + len, sizeof(priv->buf) - len, - "Port %d MIB counters\n", - port); - - mib_stats = &priv->mib_stats[port * num_mibs]; - for (i = 0; i < num_mibs; i++) - len += snprintf(buf + len, sizeof(priv->buf) - len, - "%-12s: %llu\n", - ar40xx_mibs[i].name, - mib_stats[i]); - - val->value.s = buf; - val->len = len; - -unlock: - mutex_unlock(&priv->mib_lock); - return ret; -} - -static int -ar40xx_sw_set_vid(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - priv->vlan_id[val->port_vlan] = val->value.i; - return 0; -} - -static int -ar40xx_sw_get_vid(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - val->value.i = priv->vlan_id[val->port_vlan]; - return 0; -} - -static int -ar40xx_sw_get_pvid(struct switch_dev *dev, int port, int *vlan) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - *vlan = priv->pvid[port]; - return 0; -} - -static int -ar40xx_sw_set_pvid(struct switch_dev *dev, int port, int vlan) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - /* make sure no invalid PVIDs get set */ - if (vlan >= dev->vlans) - return -EINVAL; - - priv->pvid[port] = vlan; - return 0; -} - -static void -ar40xx_read_port_link(struct ar40xx_priv *priv, int port, - struct switch_port_link *link) -{ - u32 status; - u32 speed; - - memset(link, 0, sizeof(*link)); - - status = ar40xx_read(priv, AR40XX_REG_PORT_STATUS(port)); - - link->aneg = !!(status & AR40XX_PORT_AUTO_LINK_EN); - if (link->aneg || (port != AR40XX_PORT_CPU)) - link->link = !!(status & AR40XX_PORT_STATUS_LINK_UP); - else - link->link = true; - - if (!link->link) - return; - - link->duplex = !!(status & AR40XX_PORT_DUPLEX); - link->tx_flow = !!(status & AR40XX_PORT_STATUS_TXFLOW); - link->rx_flow = !!(status & AR40XX_PORT_STATUS_RXFLOW); - - speed = (status & AR40XX_PORT_SPEED) >> - AR40XX_PORT_STATUS_SPEED_S; - - switch (speed) { - case AR40XX_PORT_SPEED_10M: - link->speed = SWITCH_PORT_SPEED_10; - break; - case AR40XX_PORT_SPEED_100M: - link->speed = SWITCH_PORT_SPEED_100; - break; - case AR40XX_PORT_SPEED_1000M: - link->speed = SWITCH_PORT_SPEED_1000; - break; - default: - link->speed = SWITCH_PORT_SPEED_UNKNOWN; - break; - } -} - -static int -ar40xx_sw_get_port_link(struct switch_dev *dev, int port, - struct switch_port_link *link) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - - ar40xx_read_port_link(priv, port, link); - return 0; -} - -static const struct switch_attr ar40xx_sw_attr_globals[] = { - { - .type = SWITCH_TYPE_INT, - .name = "enable_vlan", - .description = "Enable VLAN mode", - .set = ar40xx_sw_set_vlan, - .get = ar40xx_sw_get_vlan, - .max = 1 - }, - { - .type = SWITCH_TYPE_NOVAL, - .name = "reset_mibs", - .description = "Reset all MIB counters", - .set = ar40xx_sw_set_reset_mibs, - }, - { - .type = SWITCH_TYPE_INT, - .name = "enable_mirror_rx", - .description = "Enable mirroring of RX packets", - .set = ar40xx_sw_set_mirror_rx_enable, - .get = ar40xx_sw_get_mirror_rx_enable, - .max = 1 - }, - { - .type = SWITCH_TYPE_INT, - .name = "enable_mirror_tx", - .description = "Enable mirroring of TX packets", - .set = ar40xx_sw_set_mirror_tx_enable, - .get = ar40xx_sw_get_mirror_tx_enable, - .max = 1 - }, - { - .type = SWITCH_TYPE_INT, - .name = "mirror_monitor_port", - .description = "Mirror monitor port", - .set = ar40xx_sw_set_mirror_monitor_port, - .get = ar40xx_sw_get_mirror_monitor_port, - .max = AR40XX_NUM_PORTS - 1 - }, - { - .type = SWITCH_TYPE_INT, - .name = "mirror_source_port", - .description = "Mirror source port", - .set = ar40xx_sw_set_mirror_source_port, - .get = ar40xx_sw_get_mirror_source_port, - .max = AR40XX_NUM_PORTS - 1 - }, - { - .type = SWITCH_TYPE_INT, - .name = "linkdown", - .description = "Link down all the PHYs", - .set = ar40xx_sw_set_linkdown, - .max = 1 - }, -}; - -static const struct switch_attr ar40xx_sw_attr_port[] = { - { - .type = SWITCH_TYPE_NOVAL, - .name = "reset_mib", - .description = "Reset single port MIB counters", - .set = ar40xx_sw_set_port_reset_mib, - }, - { - .type = SWITCH_TYPE_STRING, - .name = "mib", - .description = "Get port's MIB counters", - .set = NULL, - .get = ar40xx_sw_get_port_mib, - }, -}; - -const struct switch_attr ar40xx_sw_attr_vlan[] = { - { - .type = SWITCH_TYPE_INT, - .name = "vid", - .description = "VLAN ID (0-4094)", - .set = ar40xx_sw_set_vid, - .get = ar40xx_sw_get_vid, - .max = 4094, - }, -}; - -/* End of swconfig support */ - -static int -ar40xx_wait_bit(struct ar40xx_priv *priv, int reg, u32 mask, u32 val) -{ - int timeout = 20; - u32 t; - - while (1) { - t = ar40xx_read(priv, reg); - if ((t & mask) == val) - return 0; - - if (timeout-- <= 0) - break; - - usleep_range(10, 20); - } - - pr_err("ar40xx: timeout for reg %08x: %08x & %08x != %08x\n", - (unsigned int)reg, t, mask, val); - return -ETIMEDOUT; -} - -static int -ar40xx_atu_flush(struct ar40xx_priv *priv) -{ - int ret; - - ret = ar40xx_wait_bit(priv, AR40XX_REG_ATU_FUNC, - AR40XX_ATU_FUNC_BUSY, 0); - if (!ret) - ar40xx_write(priv, AR40XX_REG_ATU_FUNC, - AR40XX_ATU_FUNC_OP_FLUSH | - AR40XX_ATU_FUNC_BUSY); - - return ret; -} - -static void -ar40xx_ess_reset(struct ar40xx_priv *priv) -{ - reset_control_assert(priv->ess_rst); - mdelay(10); - reset_control_deassert(priv->ess_rst); - /* Waiting for all inner tables init done. - * It cost 5~10ms. - */ - mdelay(10); - - pr_info("ESS reset ok!\n"); -} - -/* Start of psgmii self test */ - -static void -ar40xx_malibu_psgmii_ess_reset(struct ar40xx_priv *priv) -{ - u32 n; - struct mii_bus *bus = priv->mii_bus; - /* reset phy psgmii */ - /* fix phy psgmii RX 20bit */ - mdiobus_write(bus, 5, 0x0, 0x005b); - /* reset phy psgmii */ - mdiobus_write(bus, 5, 0x0, 0x001b); - /* release reset phy psgmii */ - mdiobus_write(bus, 5, 0x0, 0x005b); - - for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) { - u16 status; - - status = ar40xx_phy_mmd_read(priv, 5, 1, 0x28); - if (status & BIT(0)) - break; - /* Polling interval to check PSGMII PLL in malibu is ready - * the worst time is 8.67ms - * for 25MHz reference clock - * [512+(128+2048)*49]*80ns+100us - */ - mdelay(2); - } - - /*check malibu psgmii calibration done end..*/ - - /*freeze phy psgmii RX CDR*/ - mdiobus_write(bus, 5, 0x1a, 0x2230); - - ar40xx_ess_reset(priv); - - /*check psgmii calibration done start*/ - for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) { - u32 status; - - status = ar40xx_psgmii_read(priv, 0xa0); - if (status & BIT(0)) - break; - /* Polling interval to check PSGMII PLL in ESS is ready */ - mdelay(2); - } - - /* check dakota psgmii calibration done end..*/ - - /* relesae phy psgmii RX CDR */ - mdiobus_write(bus, 5, 0x1a, 0x3230); - /* release phy psgmii RX 20bit */ - mdiobus_write(bus, 5, 0x0, 0x005f); -} - -static void -ar40xx_psgmii_single_phy_testing(struct ar40xx_priv *priv, int phy) -{ - int j; - u32 tx_ok, tx_error; - u32 rx_ok, rx_error; - u32 tx_ok_high16; - u32 rx_ok_high16; - u32 tx_all_ok, rx_all_ok; - struct mii_bus *bus = priv->mii_bus; - - mdiobus_write(bus, phy, 0x0, 0x9000); - mdiobus_write(bus, phy, 0x0, 0x4140); - - for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) { - u16 status; - - status = mdiobus_read(bus, phy, 0x11); - if (status & AR40XX_PHY_SPEC_STATUS_LINK) - break; - /* the polling interval to check if the PHY link up or not - * maxwait_timer: 750 ms +/-10 ms - * minwait_timer : 1 us +/- 0.1us - * time resides in minwait_timer ~ maxwait_timer - * see IEEE 802.3 section 40.4.5.2 - */ - mdelay(8); - } - - /* enable check */ - ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0000); - ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0003); - - /* start traffic */ - ar40xx_phy_mmd_write(priv, phy, 7, 0x8020, 0xa000); - /* wait for all traffic end - * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms - */ - mdelay(50); - - /* check counter */ - tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e); - tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d); - tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f); - rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b); - rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a); - rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c); - tx_all_ok = tx_ok + (tx_ok_high16 << 16); - rx_all_ok = rx_ok + (rx_ok_high16 << 16); - if (tx_all_ok == 0x1000 && tx_error == 0) { - /* success */ - priv->phy_t_status &= (~BIT(phy)); - } else { - pr_info("PHY %d single test PSGMII issue happen!\n", phy); - priv->phy_t_status |= BIT(phy); - } - - mdiobus_write(bus, phy, 0x0, 0x1840); -} - -static void -ar40xx_psgmii_all_phy_testing(struct ar40xx_priv *priv) -{ - int phy, j; - struct mii_bus *bus = priv->mii_bus; - - mdiobus_write(bus, 0x1f, 0x0, 0x9000); - mdiobus_write(bus, 0x1f, 0x0, 0x4140); - - for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) { - for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { - u16 status; - - status = mdiobus_read(bus, phy, 0x11); - if (!(status & BIT(10))) - break; - } - - if (phy >= (AR40XX_NUM_PORTS - 1)) - break; - /* The polling interva to check if the PHY link up or not */ - mdelay(8); - } - /* enable check */ - ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0000); - ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0003); - - /* start traffic */ - ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0xa000); - /* wait for all traffic end - * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms - */ - mdelay(50); - - for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { - u32 tx_ok, tx_error; - u32 rx_ok, rx_error; - u32 tx_ok_high16; - u32 rx_ok_high16; - u32 tx_all_ok, rx_all_ok; - - /* check counter */ - tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e); - tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d); - tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f); - rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b); - rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a); - rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c); - tx_all_ok = tx_ok + (tx_ok_high16<<16); - rx_all_ok = rx_ok + (rx_ok_high16<<16); - if (tx_all_ok == 0x1000 && tx_error == 0) { - /* success */ - priv->phy_t_status &= ~BIT(phy + 8); - } else { - pr_info("PHY%d test see issue!\n", phy); - priv->phy_t_status |= BIT(phy + 8); - } - } - - pr_debug("PHY all test 0x%x \r\n", priv->phy_t_status); -} - -void -ar40xx_psgmii_self_test(struct ar40xx_priv *priv) -{ - u32 i, phy; - struct mii_bus *bus = priv->mii_bus; - - ar40xx_malibu_psgmii_ess_reset(priv); - - /* switch to access MII reg for copper */ - mdiobus_write(bus, 4, 0x1f, 0x8500); - for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { - /*enable phy mdio broadcast write*/ - ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x801f); - } - /* force no link by power down */ - mdiobus_write(bus, 0x1f, 0x0, 0x1840); - /*packet number*/ - ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x1000); - ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8062, 0x05e0); - - /*fix mdi status */ - mdiobus_write(bus, 0x1f, 0x10, 0x6800); - for (i = 0; i < AR40XX_PSGMII_CALB_NUM; i++) { - priv->phy_t_status = 0; - - for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { - ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1), - AR40XX_PORT_LOOKUP_LOOPBACK, - AR40XX_PORT_LOOKUP_LOOPBACK); - } - - for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) - ar40xx_psgmii_single_phy_testing(priv, phy); - - ar40xx_psgmii_all_phy_testing(priv); - - if (priv->phy_t_status) - ar40xx_malibu_psgmii_ess_reset(priv); - else - break; - } - - if (i >= AR40XX_PSGMII_CALB_NUM) - pr_info("PSGMII cannot recover\n"); - else - pr_debug("PSGMII recovered after %d times reset\n", i); - - /* configuration recover */ - /* packet number */ - ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x0); - /* disable check */ - ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0); - /* disable traffic */ - ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0x0); -} - -void -ar40xx_psgmii_self_test_clean(struct ar40xx_priv *priv) -{ - int phy; - struct mii_bus *bus = priv->mii_bus; - - /* disable phy internal loopback */ - mdiobus_write(bus, 0x1f, 0x10, 0x6860); - mdiobus_write(bus, 0x1f, 0x0, 0x9040); - - for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { - /* disable mac loop back */ - ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1), - AR40XX_PORT_LOOKUP_LOOPBACK, 0); - /* disable phy mdio broadcast write */ - ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x001f); - } - - /* clear fdb entry */ - ar40xx_atu_flush(priv); -} - -/* End of psgmii self test */ - -static void -ar40xx_mac_mode_init(struct ar40xx_priv *priv, u32 mode) -{ - if (mode == PORT_WRAPPER_PSGMII) { - ar40xx_psgmii_write(priv, AR40XX_PSGMII_MODE_CONTROL, 0x2200); - ar40xx_psgmii_write(priv, AR40XX_PSGMIIPHY_TX_CONTROL, 0x8380); - } -} - -static -int ar40xx_cpuport_setup(struct ar40xx_priv *priv) -{ - u32 t; - - t = AR40XX_PORT_STATUS_TXFLOW | - AR40XX_PORT_STATUS_RXFLOW | - AR40XX_PORT_TXHALF_FLOW | - AR40XX_PORT_DUPLEX | - AR40XX_PORT_SPEED_1000M; - ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t); - usleep_range(10, 20); - - t |= AR40XX_PORT_TX_EN | - AR40XX_PORT_RX_EN; - ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t); - - return 0; -} - -static void -ar40xx_init_port(struct ar40xx_priv *priv, int port) -{ - u32 t; - - ar40xx_write(priv, AR40XX_REG_PORT_STATUS(port), 0); - - ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0); - - ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), 0); - - t = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH << AR40XX_PORT_VLAN1_OUT_MODE_S; - ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t); - - t = AR40XX_PORT_LOOKUP_LEARN; - t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S; - ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t); -} - -void -ar40xx_init_globals(struct ar40xx_priv *priv) -{ - u32 t; - - /* enable CPU port and disable mirror port */ - t = AR40XX_FWD_CTRL0_CPU_PORT_EN | - AR40XX_FWD_CTRL0_MIRROR_PORT; - ar40xx_write(priv, AR40XX_REG_FWD_CTRL0, t); - - /* forward multicast and broadcast frames to CPU */ - t = (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_UC_FLOOD_S) | - (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_MC_FLOOD_S) | - (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_BC_FLOOD_S); - ar40xx_write(priv, AR40XX_REG_FWD_CTRL1, t); - - /* enable jumbo frames */ - ar40xx_rmw(priv, AR40XX_REG_MAX_FRAME_SIZE, - AR40XX_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2); - - /* Enable MIB counters */ - ar40xx_rmw(priv, AR40XX_REG_MODULE_EN, 0, - AR40XX_MODULE_EN_MIB); - - /* Disable AZ */ - ar40xx_write(priv, AR40XX_REG_EEE_CTRL, 0); - - /* set flowctrl thershold for cpu port */ - t = (AR40XX_PORT0_FC_THRESH_ON_DFLT << 16) | - AR40XX_PORT0_FC_THRESH_OFF_DFLT; - ar40xx_write(priv, AR40XX_REG_PORT_FLOWCTRL_THRESH(0), t); -} - -static int -ar40xx_hw_init(struct ar40xx_priv *priv) -{ - u32 i; - - ar40xx_ess_reset(priv); - - if (!priv->mii_bus) - return -1; - - ar40xx_psgmii_self_test(priv); - ar40xx_psgmii_self_test_clean(priv); - - ar40xx_mac_mode_init(priv, priv->mac_mode); - - for (i = 0; i < priv->dev.ports; i++) - ar40xx_init_port(priv, i); - - ar40xx_init_globals(priv); - - return 0; -} - -/* Start of qm error WAR */ - -static -int ar40xx_force_1g_full(struct ar40xx_priv *priv, u32 port_id) -{ - u32 reg; - - if (port_id < 0 || port_id > 6) - return -1; - - reg = AR40XX_REG_PORT_STATUS(port_id); - return ar40xx_rmw(priv, reg, AR40XX_PORT_SPEED, - (AR40XX_PORT_SPEED_1000M | AR40XX_PORT_DUPLEX)); -} - -static -int ar40xx_get_qm_status(struct ar40xx_priv *priv, - u32 port_id, u32 *qm_buffer_err) -{ - u32 reg; - u32 qm_val; - - if (port_id < 1 || port_id > 5) { - *qm_buffer_err = 0; - return -1; - } - - if (port_id < 4) { - reg = AR40XX_REG_QM_PORT0_3_QNUM; - ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg); - qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE); - /* every 8 bits for each port */ - *qm_buffer_err = (qm_val >> (port_id * 8)) & 0xFF; - } else { - reg = AR40XX_REG_QM_PORT4_6_QNUM; - ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg); - qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE); - /* every 8 bits for each port */ - *qm_buffer_err = (qm_val >> ((port_id-4) * 8)) & 0xFF; - } - - return 0; -} - -static void -ar40xx_sw_mac_polling_task(struct ar40xx_priv *priv) -{ - static int task_count; - u32 i; - u32 reg, value; - u32 link, speed, duplex; - u32 qm_buffer_err; - u16 port_phy_status[AR40XX_NUM_PORTS]; - static u32 qm_err_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0}; - static u32 link_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0}; - struct mii_bus *bus = NULL; - - if (!priv || !priv->mii_bus) - return; - - bus = priv->mii_bus; - - ++task_count; - - for (i = 1; i < AR40XX_NUM_PORTS; ++i) { - port_phy_status[i] = - mdiobus_read(bus, i-1, AR40XX_PHY_SPEC_STATUS); - - speed = FIELD_GET(AR40XX_PHY_SPEC_STATUS_SPEED, - port_phy_status[i]); - link = FIELD_GET(AR40XX_PHY_SPEC_STATUS_LINK, - port_phy_status[i]); - duplex = FIELD_GET(AR40XX_PHY_SPEC_STATUS_DUPLEX, - port_phy_status[i]); - - if (link != priv->ar40xx_port_old_link[i]) { - ++link_cnt[i]; - /* Up --> Down */ - if ((priv->ar40xx_port_old_link[i] == - AR40XX_PORT_LINK_UP) && - (link == AR40XX_PORT_LINK_DOWN)) { - /* LINK_EN disable(MAC force mode)*/ - reg = AR40XX_REG_PORT_STATUS(i); - ar40xx_rmw(priv, reg, - AR40XX_PORT_AUTO_LINK_EN, 0); - - /* Check queue buffer */ - qm_err_cnt[i] = 0; - ar40xx_get_qm_status(priv, i, &qm_buffer_err); - if (qm_buffer_err) { - priv->ar40xx_port_qm_buf[i] = - AR40XX_QM_NOT_EMPTY; - } else { - u16 phy_val = 0; - - priv->ar40xx_port_qm_buf[i] = - AR40XX_QM_EMPTY; - ar40xx_force_1g_full(priv, i); - /* Ref:QCA8337 Datasheet,Clearing - * MENU_CTRL_EN prevents phy to - * stuck in 100BT mode when - * bringing up the link - */ - ar40xx_phy_dbg_read(priv, i-1, - AR40XX_PHY_DEBUG_0, - &phy_val); - phy_val &= (~AR40XX_PHY_MANU_CTRL_EN); - ar40xx_phy_dbg_write(priv, i-1, - AR40XX_PHY_DEBUG_0, - phy_val); - } - priv->ar40xx_port_old_link[i] = link; - } else if ((priv->ar40xx_port_old_link[i] == - AR40XX_PORT_LINK_DOWN) && - (link == AR40XX_PORT_LINK_UP)) { - /* Down --> Up */ - if (priv->port_link_up[i] < 1) { - ++priv->port_link_up[i]; - } else { - /* Change port status */ - reg = AR40XX_REG_PORT_STATUS(i); - value = ar40xx_read(priv, reg); - priv->port_link_up[i] = 0; - - value &= ~(AR40XX_PORT_DUPLEX | - AR40XX_PORT_SPEED); - value |= speed | (duplex ? BIT(6) : 0); - ar40xx_write(priv, reg, value); - /* clock switch need such time - * to avoid glitch - */ - usleep_range(100, 200); - - value |= AR40XX_PORT_AUTO_LINK_EN; - ar40xx_write(priv, reg, value); - /* HW need such time to make sure link - * stable before enable MAC - */ - usleep_range(100, 200); - - if (speed == AR40XX_PORT_SPEED_100M) { - u16 phy_val = 0; - /* Enable @100M, if down to 10M - * clock will change smoothly - */ - ar40xx_phy_dbg_read(priv, i-1, - 0, - &phy_val); - phy_val |= - AR40XX_PHY_MANU_CTRL_EN; - ar40xx_phy_dbg_write(priv, i-1, - 0, - phy_val); - } - priv->ar40xx_port_old_link[i] = link; - } - } - } - - if (priv->ar40xx_port_qm_buf[i] == AR40XX_QM_NOT_EMPTY) { - /* Check QM */ - ar40xx_get_qm_status(priv, i, &qm_buffer_err); - if (qm_buffer_err) { - ++qm_err_cnt[i]; - } else { - priv->ar40xx_port_qm_buf[i] = - AR40XX_QM_EMPTY; - qm_err_cnt[i] = 0; - ar40xx_force_1g_full(priv, i); - } - } - } -} - -static void -ar40xx_qm_err_check_work_task(struct work_struct *work) -{ - struct ar40xx_priv *priv = container_of(work, struct ar40xx_priv, - qm_dwork.work); - - mutex_lock(&priv->qm_lock); - - ar40xx_sw_mac_polling_task(priv); - - mutex_unlock(&priv->qm_lock); - - schedule_delayed_work(&priv->qm_dwork, - msecs_to_jiffies(AR40XX_QM_WORK_DELAY)); -} - -static int -ar40xx_qm_err_check_work_start(struct ar40xx_priv *priv) -{ - mutex_init(&priv->qm_lock); - - INIT_DELAYED_WORK(&priv->qm_dwork, ar40xx_qm_err_check_work_task); - - schedule_delayed_work(&priv->qm_dwork, - msecs_to_jiffies(AR40XX_QM_WORK_DELAY)); - - return 0; -} - -/* End of qm error WAR */ - -static int -ar40xx_vlan_init(struct ar40xx_priv *priv) -{ - int port; - unsigned long bmp; - - /* By default Enable VLAN */ - priv->vlan = 1; - priv->vlan_table[AR40XX_LAN_VLAN] = priv->cpu_bmp | priv->lan_bmp; - priv->vlan_table[AR40XX_WAN_VLAN] = priv->cpu_bmp | priv->wan_bmp; - priv->vlan_tagged = priv->cpu_bmp; - bmp = priv->lan_bmp; - for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS) - priv->pvid[port] = AR40XX_LAN_VLAN; - - bmp = priv->wan_bmp; - for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS) - priv->pvid[port] = AR40XX_WAN_VLAN; - - return 0; -} - -static void -ar40xx_mib_work_func(struct work_struct *work) -{ - struct ar40xx_priv *priv; - int err; - - priv = container_of(work, struct ar40xx_priv, mib_work.work); - - mutex_lock(&priv->mib_lock); - - err = ar40xx_mib_capture(priv); - if (err) - goto next_port; - - ar40xx_mib_fetch_port_stat(priv, priv->mib_next_port, false); - -next_port: - priv->mib_next_port++; - if (priv->mib_next_port >= priv->dev.ports) - priv->mib_next_port = 0; - - mutex_unlock(&priv->mib_lock); - - schedule_delayed_work(&priv->mib_work, - msecs_to_jiffies(AR40XX_MIB_WORK_DELAY)); -} - -static void -ar40xx_setup_port(struct ar40xx_priv *priv, int port, u32 members) -{ - u32 t; - u32 egress, ingress; - u32 pvid = priv->vlan_id[priv->pvid[port]]; - - if (priv->vlan) { - egress = AR40XX_PORT_VLAN1_OUT_MODE_UNMOD; - - ingress = AR40XX_IN_SECURE; - } else { - egress = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH; - ingress = AR40XX_IN_PORT_ONLY; - } - - t = pvid << AR40XX_PORT_VLAN0_DEF_SVID_S; - t |= pvid << AR40XX_PORT_VLAN0_DEF_CVID_S; - ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), t); - - t = AR40XX_PORT_VLAN1_PORT_VLAN_PROP; - t |= egress << AR40XX_PORT_VLAN1_OUT_MODE_S; - - ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t); - - t = members; - t |= AR40XX_PORT_LOOKUP_LEARN; - t |= ingress << AR40XX_PORT_LOOKUP_IN_MODE_S; - t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S; - ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t); -} - -static void -ar40xx_vtu_op(struct ar40xx_priv *priv, u32 op, u32 val) -{ - if (ar40xx_wait_bit(priv, AR40XX_REG_VTU_FUNC1, - AR40XX_VTU_FUNC1_BUSY, 0)) - return; - - if ((op & AR40XX_VTU_FUNC1_OP) == AR40XX_VTU_FUNC1_OP_LOAD) - ar40xx_write(priv, AR40XX_REG_VTU_FUNC0, val); - - op |= AR40XX_VTU_FUNC1_BUSY; - ar40xx_write(priv, AR40XX_REG_VTU_FUNC1, op); -} - -static void -ar40xx_vtu_load_vlan(struct ar40xx_priv *priv, u32 vid, u32 port_mask) -{ - u32 op; - u32 val; - int i; - - op = AR40XX_VTU_FUNC1_OP_LOAD | (vid << AR40XX_VTU_FUNC1_VID_S); - val = AR40XX_VTU_FUNC0_VALID | AR40XX_VTU_FUNC0_IVL; - for (i = 0; i < AR40XX_NUM_PORTS; i++) { - u32 mode; - - if ((port_mask & BIT(i)) == 0) - mode = AR40XX_VTU_FUNC0_EG_MODE_NOT; - else if (priv->vlan == 0) - mode = AR40XX_VTU_FUNC0_EG_MODE_KEEP; - else if ((priv->vlan_tagged & BIT(i)) || - (priv->vlan_id[priv->pvid[i]] != vid)) - mode = AR40XX_VTU_FUNC0_EG_MODE_TAG; - else - mode = AR40XX_VTU_FUNC0_EG_MODE_UNTAG; - - val |= mode << AR40XX_VTU_FUNC0_EG_MODE_S(i); - } - ar40xx_vtu_op(priv, op, val); -} - -static void -ar40xx_vtu_flush(struct ar40xx_priv *priv) -{ - ar40xx_vtu_op(priv, AR40XX_VTU_FUNC1_OP_FLUSH, 0); -} - -static int -ar40xx_sw_hw_apply(struct switch_dev *dev) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - u8 portmask[AR40XX_NUM_PORTS]; - int i, j; - - mutex_lock(&priv->reg_mutex); - /* flush all vlan entries */ - ar40xx_vtu_flush(priv); - - memset(portmask, 0, sizeof(portmask)); - if (priv->vlan) { - for (j = 0; j < AR40XX_MAX_VLANS; j++) { - u8 vp = priv->vlan_table[j]; - - if (!vp) - continue; - - for (i = 0; i < dev->ports; i++) { - u8 mask = BIT(i); - - if (vp & mask) - portmask[i] |= vp & ~mask; - } - - ar40xx_vtu_load_vlan(priv, priv->vlan_id[j], - priv->vlan_table[j]); - } - } else { - /* 8021q vlan disabled */ - for (i = 0; i < dev->ports; i++) { - if (i == AR40XX_PORT_CPU) - continue; - - portmask[i] = BIT(AR40XX_PORT_CPU); - portmask[AR40XX_PORT_CPU] |= BIT(i); - } - } - - /* update the port destination mask registers and tag settings */ - for (i = 0; i < dev->ports; i++) - ar40xx_setup_port(priv, i, portmask[i]); - - ar40xx_set_mirror_regs(priv); - - mutex_unlock(&priv->reg_mutex); - return 0; -} - -static int -ar40xx_sw_reset_switch(struct switch_dev *dev) -{ - struct ar40xx_priv *priv = swdev_to_ar40xx(dev); - int i, rv; - - mutex_lock(&priv->reg_mutex); - memset(&priv->vlan, 0, sizeof(struct ar40xx_priv) - - offsetof(struct ar40xx_priv, vlan)); - - for (i = 0; i < AR40XX_MAX_VLANS; i++) - priv->vlan_id[i] = i; - - ar40xx_vlan_init(priv); - - priv->mirror_rx = false; - priv->mirror_tx = false; - priv->source_port = 0; - priv->monitor_port = 0; - - mutex_unlock(&priv->reg_mutex); - - rv = ar40xx_sw_hw_apply(dev); - return rv; -} - -static int -ar40xx_start(struct ar40xx_priv *priv) -{ - int ret; - - ret = ar40xx_hw_init(priv); - if (ret) - return ret; - - ret = ar40xx_sw_reset_switch(&priv->dev); - if (ret) - return ret; - - /* at last, setup cpu port */ - ret = ar40xx_cpuport_setup(priv); - if (ret) - return ret; - - schedule_delayed_work(&priv->mib_work, - msecs_to_jiffies(AR40XX_MIB_WORK_DELAY)); - - ar40xx_qm_err_check_work_start(priv); - - return 0; -} - -static const struct switch_dev_ops ar40xx_sw_ops = { - .attr_global = { - .attr = ar40xx_sw_attr_globals, - .n_attr = ARRAY_SIZE(ar40xx_sw_attr_globals), - }, - .attr_port = { - .attr = ar40xx_sw_attr_port, - .n_attr = ARRAY_SIZE(ar40xx_sw_attr_port), - }, - .attr_vlan = { - .attr = ar40xx_sw_attr_vlan, - .n_attr = ARRAY_SIZE(ar40xx_sw_attr_vlan), - }, - .get_port_pvid = ar40xx_sw_get_pvid, - .set_port_pvid = ar40xx_sw_set_pvid, - .get_vlan_ports = ar40xx_sw_get_ports, - .set_vlan_ports = ar40xx_sw_set_ports, - .apply_config = ar40xx_sw_hw_apply, - .reset_switch = ar40xx_sw_reset_switch, - .get_port_link = ar40xx_sw_get_port_link, -}; - -/* Platform driver probe function */ - -static int ar40xx_probe(struct platform_device *pdev) -{ - struct device_node *switch_node; - struct device_node *psgmii_node; - struct device_node *mdio_node; - const __be32 *mac_mode; - struct clk *ess_clk; - struct switch_dev *swdev; - struct ar40xx_priv *priv; - u32 len; - u32 num_mibs; - struct resource psgmii_base = {0}; - struct resource switch_base = {0}; - int ret; - - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - platform_set_drvdata(pdev, priv); - ar40xx_priv = priv; - - switch_node = of_node_get(pdev->dev.of_node); - if (of_address_to_resource(switch_node, 0, &switch_base) != 0) - return -EIO; - - priv->hw_addr = devm_ioremap_resource(&pdev->dev, &switch_base); - if (IS_ERR(priv->hw_addr)) { - dev_err(&pdev->dev, "Failed to ioremap switch_base!\n"); - return PTR_ERR(priv->hw_addr); - } - - /*psgmii dts get*/ - psgmii_node = of_find_node_by_name(NULL, "ess-psgmii"); - if (!psgmii_node) { - dev_err(&pdev->dev, "Failed to find ess-psgmii node!\n"); - return -EINVAL; - } - - if (of_address_to_resource(psgmii_node, 0, &psgmii_base) != 0) - return -EIO; - - priv->psgmii_hw_addr = devm_ioremap_resource(&pdev->dev, &psgmii_base); - if (IS_ERR(priv->psgmii_hw_addr)) { - dev_err(&pdev->dev, "psgmii ioremap fail!\n"); - return PTR_ERR(priv->psgmii_hw_addr); - } - - mac_mode = of_get_property(switch_node, "switch_mac_mode", &len); - if (!mac_mode) { - dev_err(&pdev->dev, "Failed to read switch_mac_mode\n"); - return -EINVAL; - } - priv->mac_mode = be32_to_cpup(mac_mode); - - ess_clk = of_clk_get_by_name(switch_node, "ess_clk"); - if (ess_clk) - clk_prepare_enable(ess_clk); - - priv->ess_rst = devm_reset_control_get(&pdev->dev, "ess_rst"); - if (IS_ERR(priv->ess_rst)) { - dev_err(&pdev->dev, "Failed to get ess_rst control!\n"); - return PTR_ERR(priv->ess_rst); - } - - if (of_property_read_u32(switch_node, "switch_cpu_bmp", - &priv->cpu_bmp) || - of_property_read_u32(switch_node, "switch_lan_bmp", - &priv->lan_bmp) || - of_property_read_u32(switch_node, "switch_wan_bmp", - &priv->wan_bmp)) { - dev_err(&pdev->dev, "Failed to read port properties\n"); - return -EIO; - } - - mutex_init(&priv->reg_mutex); - mutex_init(&priv->mib_lock); - INIT_DELAYED_WORK(&priv->mib_work, ar40xx_mib_work_func); - - /* register switch */ - swdev = &priv->dev; - - mdio_node = of_find_compatible_node(NULL, NULL, "qcom,ipq4019-mdio"); - if (!mdio_node) { - dev_err(&pdev->dev, "Probe failed - Cannot find mdio node by phandle!\n"); - ret = -ENODEV; - goto err_missing_phy; - } - - priv->mii_bus = of_mdio_find_bus(mdio_node); - - if (priv->mii_bus == NULL) { - dev_err(&pdev->dev, "Probe failed - Missing PHYs!\n"); - ret = -ENODEV; - goto err_missing_phy; - } - - swdev->alias = dev_name(&priv->mii_bus->dev); - - swdev->cpu_port = AR40XX_PORT_CPU; - swdev->name = "QCA AR40xx"; - swdev->vlans = AR40XX_MAX_VLANS; - swdev->ports = AR40XX_NUM_PORTS; - swdev->ops = &ar40xx_sw_ops; - ret = register_switch(swdev, NULL); - if (ret < 0) { - dev_err(&pdev->dev, "Switch registration failed!\n"); - return ret; - } - - num_mibs = ARRAY_SIZE(ar40xx_mibs); - len = priv->dev.ports * num_mibs * - sizeof(*priv->mib_stats); - priv->mib_stats = devm_kzalloc(&pdev->dev, len, GFP_KERNEL); - if (!priv->mib_stats) { - ret = -ENOMEM; - goto err_unregister_switch; - } - - ar40xx_start(priv); - - return 0; - -err_unregister_switch: - unregister_switch(&priv->dev); -err_missing_phy: - platform_set_drvdata(pdev, NULL); - return ret; -} - -static int ar40xx_remove(struct platform_device *pdev) -{ - struct ar40xx_priv *priv = platform_get_drvdata(pdev); - - cancel_delayed_work_sync(&priv->qm_dwork); - cancel_delayed_work_sync(&priv->mib_work); - - unregister_switch(&priv->dev); - - return 0; -} - -static const struct of_device_id ar40xx_of_mtable[] = { - {.compatible = "qcom,ess-switch" }, - {} -}; - -struct platform_driver ar40xx_drv = { - .probe = ar40xx_probe, - .remove = ar40xx_remove, - .driver = { - .name = "ar40xx", - .of_match_table = ar40xx_of_mtable, - }, -}; - -module_platform_driver(ar40xx_drv); - -MODULE_DESCRIPTION("IPQ40XX ESS driver"); -MODULE_LICENSE("Dual BSD/GPL"); diff --git a/target/linux/ipq40xx/files-5.4/drivers/net/phy/ar40xx.h b/target/linux/ipq40xx/files-5.4/drivers/net/phy/ar40xx.h deleted file mode 100644 index 7ba40ccf75..0000000000 --- a/target/linux/ipq40xx/files-5.4/drivers/net/phy/ar40xx.h +++ /dev/null @@ -1,342 +0,0 @@ -/* - * Copyright (c) 2016, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for - * any purpose with or without fee is hereby granted, provided that the - * above copyright notice and this permission notice appear in all copies. - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT - * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - - #ifndef __AR40XX_H -#define __AR40XX_H - -#define AR40XX_MAX_VLANS 128 -#define AR40XX_NUM_PORTS 6 -#define AR40XX_NUM_PHYS 5 - -#define BITS(_s, _n) (((1UL << (_n)) - 1) << _s) - -struct ar40xx_priv { - struct switch_dev dev; - - u8 __iomem *hw_addr; - u8 __iomem *psgmii_hw_addr; - u32 mac_mode; - struct reset_control *ess_rst; - u32 cpu_bmp; - u32 lan_bmp; - u32 wan_bmp; - - struct mii_bus *mii_bus; - struct phy_device *phy; - - /* mutex for qm task */ - struct mutex qm_lock; - struct delayed_work qm_dwork; - u32 port_link_up[AR40XX_NUM_PORTS]; - u32 ar40xx_port_old_link[AR40XX_NUM_PORTS]; - u32 ar40xx_port_qm_buf[AR40XX_NUM_PORTS]; - - u32 phy_t_status; - - /* mutex for switch reg access */ - struct mutex reg_mutex; - - /* mutex for mib task */ - struct mutex mib_lock; - struct delayed_work mib_work; - int mib_next_port; - u64 *mib_stats; - - char buf[2048]; - - /* all fields below will be cleared on reset */ - bool vlan; - u16 vlan_id[AR40XX_MAX_VLANS]; - u8 vlan_table[AR40XX_MAX_VLANS]; - u8 vlan_tagged; - u16 pvid[AR40XX_NUM_PORTS]; - - /* mirror */ - bool mirror_rx; - bool mirror_tx; - int source_port; - int monitor_port; -}; - -#define AR40XX_PORT_LINK_UP 1 -#define AR40XX_PORT_LINK_DOWN 0 -#define AR40XX_QM_NOT_EMPTY 1 -#define AR40XX_QM_EMPTY 0 - -#define AR40XX_LAN_VLAN 1 -#define AR40XX_WAN_VLAN 2 - -enum ar40xx_port_wrapper_cfg { - PORT_WRAPPER_PSGMII = 0, -}; - -struct ar40xx_mib_desc { - u32 size; - u32 offset; - const char *name; -}; - -#define AR40XX_PORT_CPU 0 - -#define AR40XX_PSGMII_MODE_CONTROL 0x1b4 -#define AR40XX_PSGMII_ATHR_CSCO_MODE_25M BIT(0) - -#define AR40XX_PSGMIIPHY_TX_CONTROL 0x288 - -#define AR40XX_MII_ATH_MMD_ADDR 0x0d -#define AR40XX_MII_ATH_MMD_DATA 0x0e -#define AR40XX_MII_ATH_DBG_ADDR 0x1d -#define AR40XX_MII_ATH_DBG_DATA 0x1e - -#define AR40XX_STATS_RXBROAD 0x00 -#define AR40XX_STATS_RXPAUSE 0x04 -#define AR40XX_STATS_RXMULTI 0x08 -#define AR40XX_STATS_RXFCSERR 0x0c -#define AR40XX_STATS_RXALIGNERR 0x10 -#define AR40XX_STATS_RXRUNT 0x14 -#define AR40XX_STATS_RXFRAGMENT 0x18 -#define AR40XX_STATS_RX64BYTE 0x1c -#define AR40XX_STATS_RX128BYTE 0x20 -#define AR40XX_STATS_RX256BYTE 0x24 -#define AR40XX_STATS_RX512BYTE 0x28 -#define AR40XX_STATS_RX1024BYTE 0x2c -#define AR40XX_STATS_RX1518BYTE 0x30 -#define AR40XX_STATS_RXMAXBYTE 0x34 -#define AR40XX_STATS_RXTOOLONG 0x38 -#define AR40XX_STATS_RXGOODBYTE 0x3c -#define AR40XX_STATS_RXBADBYTE 0x44 -#define AR40XX_STATS_RXOVERFLOW 0x4c -#define AR40XX_STATS_FILTERED 0x50 -#define AR40XX_STATS_TXBROAD 0x54 -#define AR40XX_STATS_TXPAUSE 0x58 -#define AR40XX_STATS_TXMULTI 0x5c -#define AR40XX_STATS_TXUNDERRUN 0x60 -#define AR40XX_STATS_TX64BYTE 0x64 -#define AR40XX_STATS_TX128BYTE 0x68 -#define AR40XX_STATS_TX256BYTE 0x6c -#define AR40XX_STATS_TX512BYTE 0x70 -#define AR40XX_STATS_TX1024BYTE 0x74 -#define AR40XX_STATS_TX1518BYTE 0x78 -#define AR40XX_STATS_TXMAXBYTE 0x7c -#define AR40XX_STATS_TXOVERSIZE 0x80 -#define AR40XX_STATS_TXBYTE 0x84 -#define AR40XX_STATS_TXCOLLISION 0x8c -#define AR40XX_STATS_TXABORTCOL 0x90 -#define AR40XX_STATS_TXMULTICOL 0x94 -#define AR40XX_STATS_TXSINGLECOL 0x98 -#define AR40XX_STATS_TXEXCDEFER 0x9c -#define AR40XX_STATS_TXDEFER 0xa0 -#define AR40XX_STATS_TXLATECOL 0xa4 - -#define AR40XX_REG_MODULE_EN 0x030 -#define AR40XX_MODULE_EN_MIB BIT(0) - -#define AR40XX_REG_MIB_FUNC 0x034 -#define AR40XX_MIB_BUSY BIT(17) -#define AR40XX_MIB_CPU_KEEP BIT(20) -#define AR40XX_MIB_FUNC BITS(24, 3) -#define AR40XX_MIB_FUNC_S 24 -#define AR40XX_MIB_FUNC_NO_OP 0x0 -#define AR40XX_MIB_FUNC_FLUSH 0x1 - -#define AR40XX_ESS_SERVICE_TAG 0x48 -#define AR40XX_ESS_SERVICE_TAG_STAG BIT(17) - -#define AR40XX_REG_PORT_STATUS(_i) (0x07c + (_i) * 4) -#define AR40XX_PORT_SPEED BITS(0, 2) -#define AR40XX_PORT_STATUS_SPEED_S 0 -#define AR40XX_PORT_TX_EN BIT(2) -#define AR40XX_PORT_RX_EN BIT(3) -#define AR40XX_PORT_STATUS_TXFLOW BIT(4) -#define AR40XX_PORT_STATUS_RXFLOW BIT(5) -#define AR40XX_PORT_DUPLEX BIT(6) -#define AR40XX_PORT_TXHALF_FLOW BIT(7) -#define AR40XX_PORT_STATUS_LINK_UP BIT(8) -#define AR40XX_PORT_AUTO_LINK_EN BIT(9) -#define AR40XX_PORT_STATUS_FLOW_CONTROL BIT(12) - -#define AR40XX_REG_MAX_FRAME_SIZE 0x078 -#define AR40XX_MAX_FRAME_SIZE_MTU BITS(0, 14) - -#define AR40XX_REG_PORT_HEADER(_i) (0x09c + (_i) * 4) - -#define AR40XX_REG_EEE_CTRL 0x100 -#define AR40XX_EEE_CTRL_DISABLE_PHY(_i) BIT(4 + (_i) * 2) - -#define AR40XX_REG_PORT_VLAN0(_i) (0x420 + (_i) * 0x8) -#define AR40XX_PORT_VLAN0_DEF_SVID BITS(0, 12) -#define AR40XX_PORT_VLAN0_DEF_SVID_S 0 -#define AR40XX_PORT_VLAN0_DEF_CVID BITS(16, 12) -#define AR40XX_PORT_VLAN0_DEF_CVID_S 16 - -#define AR40XX_REG_PORT_VLAN1(_i) (0x424 + (_i) * 0x8) -#define AR40XX_PORT_VLAN1_CORE_PORT BIT(9) -#define AR40XX_PORT_VLAN1_PORT_TLS_MODE BIT(7) -#define AR40XX_PORT_VLAN1_PORT_VLAN_PROP BIT(6) -#define AR40XX_PORT_VLAN1_OUT_MODE BITS(12, 2) -#define AR40XX_PORT_VLAN1_OUT_MODE_S 12 -#define AR40XX_PORT_VLAN1_OUT_MODE_UNMOD 0 -#define AR40XX_PORT_VLAN1_OUT_MODE_UNTAG 1 -#define AR40XX_PORT_VLAN1_OUT_MODE_TAG 2 -#define AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH 3 - -#define AR40XX_REG_VTU_FUNC0 0x0610 -#define AR40XX_VTU_FUNC0_EG_MODE BITS(4, 14) -#define AR40XX_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2) -#define AR40XX_VTU_FUNC0_EG_MODE_KEEP 0 -#define AR40XX_VTU_FUNC0_EG_MODE_UNTAG 1 -#define AR40XX_VTU_FUNC0_EG_MODE_TAG 2 -#define AR40XX_VTU_FUNC0_EG_MODE_NOT 3 -#define AR40XX_VTU_FUNC0_IVL BIT(19) -#define AR40XX_VTU_FUNC0_VALID BIT(20) - -#define AR40XX_REG_VTU_FUNC1 0x0614 -#define AR40XX_VTU_FUNC1_OP BITS(0, 3) -#define AR40XX_VTU_FUNC1_OP_NOOP 0 -#define AR40XX_VTU_FUNC1_OP_FLUSH 1 -#define AR40XX_VTU_FUNC1_OP_LOAD 2 -#define AR40XX_VTU_FUNC1_OP_PURGE 3 -#define AR40XX_VTU_FUNC1_OP_REMOVE_PORT 4 -#define AR40XX_VTU_FUNC1_OP_GET_NEXT 5 -#define AR40XX7_VTU_FUNC1_OP_GET_ONE 6 -#define AR40XX_VTU_FUNC1_FULL BIT(4) -#define AR40XX_VTU_FUNC1_PORT BIT(8, 4) -#define AR40XX_VTU_FUNC1_PORT_S 8 -#define AR40XX_VTU_FUNC1_VID BIT(16, 12) -#define AR40XX_VTU_FUNC1_VID_S 16 -#define AR40XX_VTU_FUNC1_BUSY BIT(31) - -#define AR40XX_REG_FWD_CTRL0 0x620 -#define AR40XX_FWD_CTRL0_CPU_PORT_EN BIT(10) -#define AR40XX_FWD_CTRL0_MIRROR_PORT BITS(4, 4) -#define AR40XX_FWD_CTRL0_MIRROR_PORT_S 4 - -#define AR40XX_REG_FWD_CTRL1 0x624 -#define AR40XX_FWD_CTRL1_UC_FLOOD BITS(0, 7) -#define AR40XX_FWD_CTRL1_UC_FLOOD_S 0 -#define AR40XX_FWD_CTRL1_MC_FLOOD BITS(8, 7) -#define AR40XX_FWD_CTRL1_MC_FLOOD_S 8 -#define AR40XX_FWD_CTRL1_BC_FLOOD BITS(16, 7) -#define AR40XX_FWD_CTRL1_BC_FLOOD_S 16 -#define AR40XX_FWD_CTRL1_IGMP BITS(24, 7) -#define AR40XX_FWD_CTRL1_IGMP_S 24 - -#define AR40XX_REG_PORT_LOOKUP(_i) (0x660 + (_i) * 0xc) -#define AR40XX_PORT_LOOKUP_MEMBER BITS(0, 7) -#define AR40XX_PORT_LOOKUP_IN_MODE BITS(8, 2) -#define AR40XX_PORT_LOOKUP_IN_MODE_S 8 -#define AR40XX_PORT_LOOKUP_STATE BITS(16, 3) -#define AR40XX_PORT_LOOKUP_STATE_S 16 -#define AR40XX_PORT_LOOKUP_LEARN BIT(20) -#define AR40XX_PORT_LOOKUP_LOOPBACK BIT(21) -#define AR40XX_PORT_LOOKUP_ING_MIRROR_EN BIT(25) - -#define AR40XX_REG_ATU_FUNC 0x60c -#define AR40XX_ATU_FUNC_OP BITS(0, 4) -#define AR40XX_ATU_FUNC_OP_NOOP 0x0 -#define AR40XX_ATU_FUNC_OP_FLUSH 0x1 -#define AR40XX_ATU_FUNC_OP_LOAD 0x2 -#define AR40XX_ATU_FUNC_OP_PURGE 0x3 -#define AR40XX_ATU_FUNC_OP_FLUSH_LOCKED 0x4 -#define AR40XX_ATU_FUNC_OP_FLUSH_UNICAST 0x5 -#define AR40XX_ATU_FUNC_OP_GET_NEXT 0x6 -#define AR40XX_ATU_FUNC_OP_SEARCH_MAC 0x7 -#define AR40XX_ATU_FUNC_OP_CHANGE_TRUNK 0x8 -#define AR40XX_ATU_FUNC_BUSY BIT(31) - -#define AR40XX_REG_QM_DEBUG_ADDR 0x820 -#define AR40XX_REG_QM_DEBUG_VALUE 0x824 -#define AR40XX_REG_QM_PORT0_3_QNUM 0x1d -#define AR40XX_REG_QM_PORT4_6_QNUM 0x1e - -#define AR40XX_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8) -#define AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16) - -#define AR40XX_REG_PORT_FLOWCTRL_THRESH(_i) (0x9b0 + (_i) * 0x4) -#define AR40XX_PORT0_FC_THRESH_ON_DFLT 0x60 -#define AR40XX_PORT0_FC_THRESH_OFF_DFLT 0x90 - -#define AR40XX_PHY_DEBUG_0 0 -#define AR40XX_PHY_MANU_CTRL_EN BIT(12) - -#define AR40XX_PHY_DEBUG_2 2 - -#define AR40XX_PHY_SPEC_STATUS 0x11 -#define AR40XX_PHY_SPEC_STATUS_LINK BIT(10) -#define AR40XX_PHY_SPEC_STATUS_DUPLEX BIT(13) -#define AR40XX_PHY_SPEC_STATUS_SPEED BITS(14, 2) - -/* port forwarding state */ -enum { - AR40XX_PORT_STATE_DISABLED = 0, - AR40XX_PORT_STATE_BLOCK = 1, - AR40XX_PORT_STATE_LISTEN = 2, - AR40XX_PORT_STATE_LEARN = 3, - AR40XX_PORT_STATE_FORWARD = 4 -}; - -/* ingress 802.1q mode */ -enum { - AR40XX_IN_PORT_ONLY = 0, - AR40XX_IN_PORT_FALLBACK = 1, - AR40XX_IN_VLAN_ONLY = 2, - AR40XX_IN_SECURE = 3 -}; - -/* egress 802.1q mode */ -enum { - AR40XX_OUT_KEEP = 0, - AR40XX_OUT_STRIP_VLAN = 1, - AR40XX_OUT_ADD_VLAN = 2 -}; - -/* port speed */ -enum { - AR40XX_PORT_SPEED_10M = 0, - AR40XX_PORT_SPEED_100M = 1, - AR40XX_PORT_SPEED_1000M = 2, - AR40XX_PORT_SPEED_ERR = 3, -}; - -#define AR40XX_MIB_WORK_DELAY 2000 /* msecs */ - -#define AR40XX_QM_WORK_DELAY 100 - -#define AR40XX_MIB_FUNC_CAPTURE 0x3 - -#define AR40XX_REG_PORT_STATS_START 0x1000 -#define AR40XX_REG_PORT_STATS_LEN 0x100 - -#define AR40XX_PORTS_ALL 0x3f - -#define AR40XX_PSGMII_ID 5 -#define AR40XX_PSGMII_CALB_NUM 100 -#define AR40XX_MALIBU_PSGMII_MODE_CTRL 0x6d -#define AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL 0x220c -#define AR40XX_MALIBU_PHY_MMD7_DAC_CTRL 0x801a -#define AR40XX_MALIBU_DAC_CTRL_MASK 0x380 -#define AR40XX_MALIBU_DAC_CTRL_VALUE 0x280 -#define AR40XX_MALIBU_PHY_RLP_CTRL 0x805a -#define AR40XX_PSGMII_TX_DRIVER_1_CTRL 0xb -#define AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP 0x8a -#define AR40XX_MALIBU_PHY_LAST_ADDR 4 - -static inline struct ar40xx_priv * -swdev_to_ar40xx(struct switch_dev *swdev) -{ - return container_of(swdev, struct ar40xx_priv, dev); -} - -#endif diff --git a/target/linux/ipq40xx/patches-5.4/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch b/target/linux/ipq40xx/patches-5.4/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch deleted file mode 100644 index 8aa71f360f..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch +++ /dev/null @@ -1,42 +0,0 @@ -From f125e2d4339dda6937865f975470b29c84714c9b Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Mon, 6 Jan 2020 14:57:15 +0100 -Subject: [PATCH] ARM: qcom: Add support for IPQ40xx - -Add support for the Qualcomm IPQ40xx SoC in Kconfig. -Also add its appropriate textofs. - -Signed-off-by: Christian Lamparter -Signed-off-by: John Crispin -Tested-by: Robert Marko -Cc: Luka Perkov -Signed-off-by: Arnd Bergmann ---- - arch/arm/Makefile | 1 + - arch/arm/mach-qcom/Kconfig | 5 +++++ - 2 files changed, 6 insertions(+) - ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -152,6 +152,7 @@ textofs-$(CONFIG_PM_H1940) := 0x001 - ifeq ($(CONFIG_ARCH_SA1100),y) - textofs-$(CONFIG_SA1111) := 0x00208000 - endif -+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000 - textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 - textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 - textofs-$(CONFIG_ARCH_MESON) := 0x00208000 ---- a/arch/arm/mach-qcom/Kconfig -+++ b/arch/arm/mach-qcom/Kconfig -@@ -12,6 +12,11 @@ menuconfig ARCH_QCOM - - if ARCH_QCOM - -+config ARCH_IPQ40XX -+ bool "Enable support for IPQ40XX" -+ select CLKSRC_QCOM -+ select HAVE_ARM_ARCH_TIMER -+ - config ARCH_MSM8X60 - bool "Enable support for MSM8X60" - select CLKSRC_QCOM diff --git a/target/linux/ipq40xx/patches-5.4/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch b/target/linux/ipq40xx/patches-5.4/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch deleted file mode 100644 index aaf8c807ed..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch +++ /dev/null @@ -1,153 +0,0 @@ -From 97043d292365ae39d62b54a6d79dff98d048b501 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 22 Jan 2020 12:44:14 +0100 -Subject: [PATCH] From ebf652b408200504194be32ad0a3f5bb49d6000a Mon Sep 17 - 00:00:00 2001 From: Robert Marko Date: Sun, 12 Jan - 2020 12:30:01 +0100 Subject: [PATCH] regulator: add IPQ4019 SDHCI VQMMC LDO - driver - -This introduces the IPQ4019 VQMMC LDO driver needed for -the SD/EMMC driver I/O level operation. -This will enable introducing SD/EMMC support for the built-in controller. - -Signed-off-by: Mantas Pucka -Signed-off-by: Robert Marko -Link: https://lore.kernel.org/r/20200112113003.11110-1-robert.marko@sartura.hr -Signed-off-by: Mark Brown ---- - drivers/regulator/Kconfig | 7 ++ - drivers/regulator/Makefile | 1 + - drivers/regulator/vqmmc-ipq4019-regulator.c | 101 ++++++++++++++++++++ - 3 files changed, 109 insertions(+) - create mode 100644 drivers/regulator/vqmmc-ipq4019-regulator.c - ---- a/drivers/regulator/Kconfig -+++ b/drivers/regulator/Kconfig -@@ -1077,6 +1077,13 @@ config REGULATOR_VEXPRESS - This driver provides support for voltage regulators available - on the ARM Ltd's Versatile Express platform. - -+config REGULATOR_VQMMC_IPQ4019 -+ tristate "IPQ4019 VQMMC SD LDO regulator support" -+ depends on ARCH_QCOM -+ help -+ This driver provides support for the VQMMC LDO I/0 -+ voltage regulator of the IPQ4019 SD/EMMC controller. -+ - config REGULATOR_WM831X - tristate "Wolfson Microelectronics WM831x PMIC regulators" - depends on MFD_WM831X ---- a/drivers/regulator/Makefile -+++ b/drivers/regulator/Makefile -@@ -132,6 +132,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-r - obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o - obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o - obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o -+obj-$(CONFIG_REGULATOR_VQMMC_IPQ4019) += vqmmc-ipq4019-regulator.o - obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o - obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o - obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o ---- /dev/null -+++ b/drivers/regulator/vqmmc-ipq4019-regulator.c -@@ -0,0 +1,101 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+// -+// Copyright (c) 2019 Mantas Pucka -+// Copyright (c) 2019 Robert Marko -+// -+// Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static const unsigned int ipq4019_vmmc_voltages[] = { -+ 1500000, 1800000, 2500000, 3000000, -+}; -+ -+static const struct regulator_ops ipq4019_regulator_voltage_ops = { -+ .list_voltage = regulator_list_voltage_table, -+ .map_voltage = regulator_map_voltage_ascend, -+ .get_voltage_sel = regulator_get_voltage_sel_regmap, -+ .set_voltage_sel = regulator_set_voltage_sel_regmap, -+}; -+ -+static const struct regulator_desc vmmc_regulator = { -+ .name = "vmmcq", -+ .ops = &ipq4019_regulator_voltage_ops, -+ .type = REGULATOR_VOLTAGE, -+ .owner = THIS_MODULE, -+ .volt_table = ipq4019_vmmc_voltages, -+ .n_voltages = ARRAY_SIZE(ipq4019_vmmc_voltages), -+ .vsel_reg = 0, -+ .vsel_mask = 0x3, -+}; -+ -+static const struct regmap_config ipq4019_vmmcq_regmap_config = { -+ .reg_bits = 32, -+ .reg_stride = 4, -+ .val_bits = 32, -+}; -+ -+static int ipq4019_regulator_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct regulator_init_data *init_data; -+ struct regulator_config cfg = {}; -+ struct regulator_dev *rdev; -+ struct resource *res; -+ struct regmap *rmap; -+ void __iomem *base; -+ -+ init_data = of_get_regulator_init_data(dev, dev->of_node, -+ &vmmc_regulator); -+ if (!init_data) -+ return -EINVAL; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config); -+ if (IS_ERR(rmap)) -+ return PTR_ERR(rmap); -+ -+ cfg.dev = dev; -+ cfg.init_data = init_data; -+ cfg.of_node = dev->of_node; -+ cfg.regmap = rmap; -+ -+ rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg); -+ if (IS_ERR(rdev)) { -+ dev_err(dev, "Failed to register regulator: %ld\n", -+ PTR_ERR(rdev)); -+ return PTR_ERR(rdev); -+ } -+ platform_set_drvdata(pdev, rdev); -+ -+ return 0; -+} -+ -+static const struct of_device_id regulator_ipq4019_of_match[] = { -+ { .compatible = "qcom,vqmmc-ipq4019-regulator", }, -+ {}, -+}; -+ -+static struct platform_driver ipq4019_regulator_driver = { -+ .probe = ipq4019_regulator_probe, -+ .driver = { -+ .name = "vqmmc-ipq4019-regulator", -+ .of_match_table = of_match_ptr(regulator_ipq4019_of_match), -+ }, -+}; -+module_platform_driver(ipq4019_regulator_driver); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Mantas Pucka "); -+MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator"); diff --git a/target/linux/ipq40xx/patches-5.4/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch b/target/linux/ipq40xx/patches-5.4/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch deleted file mode 100644 index 25fce8daf0..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 04b3b72b5b8fdb883bfdc619cb29b03641b1cc6a Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Thu, 15 Aug 2019 19:28:23 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: Add SDHCI controller node - -IPQ4019 has a built in SD/eMMC controller which is supported by the -SDHCI MSM driver, by the "qcom,sdhci-msm-v4" binding. -So lets add the appropriate node for it. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -206,6 +206,18 @@ - interrupts = ; - }; - -+ sdhci: sdhci@7824900 { -+ compatible = "qcom,sdhci-msm-v4"; -+ reg = <0x7824900 0x11c>, <0x7824000 0x800>; -+ interrupts = , ; -+ interrupt-names = "hc_irq", "pwr_irq"; -+ bus-width = <8>; -+ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, -+ <&gcc GCC_DCD_XO_CLK>; -+ clock-names = "core", "iface", "xo"; -+ status = "disabled"; -+ }; -+ - blsp_dma: dma@7884000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x07884000 0x23000>; diff --git a/target/linux/ipq40xx/patches-5.4/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch b/target/linux/ipq40xx/patches-5.4/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch deleted file mode 100644 index 3a4127febf..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch +++ /dev/null @@ -1,71 +0,0 @@ -From 5e4548922009870a38bcf1d887317676d4e08f54 Mon Sep 17 00:00:00 2001 -From: Damir Franusic -Date: Thu, 21 Nov 2019 16:29:02 +0100 -Subject: [PATCH] ARM: dts: qcom: Add nodes for SMP boot in IPQ40xx - -Add missing nodes and properties to enable SMP -support on IPQ40xx devices. - -Booting without "saw_l2" node: - -[ 0.001400] CPU: Testing write buffer coherency: ok -[ 0.001856] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 -[ 0.060163] Setting up static identity map for 0x80300000 - 0x80300060 -[ 0.080140] rcu: Hierarchical SRCU implementation. -[ 0.120258] smp: Bringing up secondary CPUs ... -[ 0.200540] CPU1: failed to boot: -19 -[ 0.280689] CPU2: failed to boot: -19 -[ 0.360874] CPU3: failed to boot: -19 -[ 0.360966] smp: Brought up 1 node, 1 CPU -[ 0.360979] SMP: Total of 1 processors activated (96.00 BogoMIPS). -[ 0.360988] CPU: All CPU(s) started in SVC mode. - -Then, booting with "saw_l2" node present (this patch applied): - -[ 0.001450] CPU: Testing write buffer coherency: ok -[ 0.001904] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 -[ 0.060161] Setting up static identity map for 0x80300000 - 0x80300060 -[ 0.080137] rcu: Hierarchical SRCU implementation. -[ 0.120252] smp: Bringing up secondary CPUs ... -[ 0.200958] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 -[ 0.281091] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 -[ 0.361264] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 -[ 0.361430] smp: Brought up 1 node, 4 CPUs -[ 0.361460] SMP: Total of 4 processors activated (384.00 BogoMIPS). -[ 0.361469] CPU: All CPU(s) started in SVC mode. - -Signed-off-by: Damir Franusic -Cc: Luka Perkov -Cc: Robert Marko -Cc: Andy Gross -Cc: Rob Herring -Cc: linux-arm-msm@vger.kernel.org -Link: https://lore.kernel.org/r/20191121152902.21394-1-damir.franusic@gmail.com -Signed-off-by: Bjorn Andersson ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -102,6 +102,7 @@ - L2: l2-cache { - compatible = "cache"; - cache-level = <2>; -+ qcom,saw = <&saw_l2>; - }; - }; - -@@ -353,6 +354,12 @@ - regulator; - }; - -+ saw_l2: regulator@b012000 { -+ compatible = "qcom,saw2"; -+ reg = <0xb012000 0x1000>; -+ regulator; -+ }; -+ - blsp1_uart1: serial@78af000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78af000 0x200>; diff --git a/target/linux/ipq40xx/patches-5.4/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch b/target/linux/ipq40xx/patches-5.4/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch deleted file mode 100644 index 6922bc8ff3..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch +++ /dev/null @@ -1,119 +0,0 @@ -From 8b99dc0922618062a1589ebd74df6108b4f9ac22 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Wed, 8 Jan 2020 13:54:55 +0100 -Subject: [PATCH] ARM: dts: qcom: add gpio-ranges property - -This patch adds the gpio-ranges property to almost all of -the Qualcomm ARM platforms that utilize the pinctrl-msm -framework. - -The gpio-ranges property is part of the gpiolib subsystem. -As a result, the binding text is available in section -"2.1 gpio- and pin-controller interaction" of -Documentation/devicetree/bindings/gpio/gpio.txt - -For more information please see the patch titled: -"pinctrl: msm: fix gpio-hog related boot issues" from -this series. - -Reported-by: Sven Eckelmann -Tested-by: Sven Eckelmann [ipq4019] -Reviewed-by: Bjorn Andersson -Reviewed-by: Linus Walleij -Signed-off-by: Christian Lamparter -Tested-by: Robert Marko [ipq4019] -Cc: Luka Perkov -Signed-off-by: Robert Marko -Link: https://lore.kernel.org/r/20200108125455.308969-1-robert.marko@sartura.hr -Signed-off-by: Bjorn Andersson ---- - arch/arm/boot/dts/qcom-apq8064.dtsi | 1 + - arch/arm/boot/dts/qcom-apq8084.dtsi | 1 + - arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + - arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 + - arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 + - arch/arm/boot/dts/qcom-msm8660.dtsi | 1 + - arch/arm/boot/dts/qcom-msm8960.dtsi | 1 + - arch/arm/boot/dts/qcom-msm8974.dtsi | 1 + - 8 files changed, 8 insertions(+) - ---- a/arch/arm/boot/dts/qcom-apq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi -@@ -350,6 +350,7 @@ - reg = <0x800000 0x4000>; - - gpio-controller; -+ gpio-ranges = <&tlmm_pinmux 0 0 90>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; ---- a/arch/arm/boot/dts/qcom-apq8084.dtsi -+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi -@@ -401,6 +401,7 @@ - compatible = "qcom,apq8084-pinctrl"; - reg = <0xfd510000 0x4000>; - gpio-controller; -+ gpio-ranges = <&tlmm 0 0 147>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -201,6 +201,7 @@ - compatible = "qcom,ipq4019-pinctrl"; - reg = <0x01000000 0x300000>; - gpio-controller; -+ gpio-ranges = <&tlmm 0 0 100>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -119,6 +119,7 @@ - reg = <0x800000 0x4000>; - - gpio-controller; -+ gpio-ranges = <&qcom_pinmux 0 0 69>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; ---- a/arch/arm/boot/dts/qcom-mdm9615.dtsi -+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi -@@ -128,6 +128,7 @@ - msmgpio: pinctrl@800000 { - compatible = "qcom,mdm9615-pinctrl"; - gpio-controller; -+ gpio-ranges = <&msmgpio 0 0 88>; - #gpio-cells = <2>; - interrupts = ; - interrupt-controller; ---- a/arch/arm/boot/dts/qcom-msm8660.dtsi -+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi -@@ -115,6 +115,7 @@ - reg = <0x800000 0x4000>; - - gpio-controller; -+ gpio-ranges = <&tlmm 0 0 173>; - #gpio-cells = <2>; - interrupts = <0 16 0x4>; - interrupt-controller; ---- a/arch/arm/boot/dts/qcom-msm8960.dtsi -+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi -@@ -107,6 +107,7 @@ - msmgpio: pinctrl@800000 { - compatible = "qcom,msm8960-pinctrl"; - gpio-controller; -+ gpio-ranges = <&msmgpio 0 0 152>; - #gpio-cells = <2>; - interrupts = <0 16 0x4>; - interrupt-controller; ---- a/arch/arm/boot/dts/qcom-msm8974.dtsi -+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi -@@ -707,6 +707,7 @@ - compatible = "qcom,msm8974-pinctrl"; - reg = <0xfd510000 0x4000>; - gpio-controller; -+ gpio-ranges = <&msmgpio 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; diff --git a/target/linux/ipq40xx/patches-5.4/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch b/target/linux/ipq40xx/patches-5.4/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch deleted file mode 100644 index f82021f4cd..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 8acc36189dcaf4487d8c6ba7445948f39b1d248a Mon Sep 17 00:00:00 2001 -From: Abhishek Sahu -Date: Fri, 3 Apr 2020 13:40:40 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: fix high resolution timer - -Cherry-picked from CAF QSDK repo. -Original commit message: -The kernel is failing in switching the timer for high resolution -mode and clock source operates in 10ms resolution. The always-on -property needs to be given for timer device tree node to make -clock source working in 1ns resolution. - -Signed-off-by: Abhishek Sahu -Signed-off-by: Pavel Kubelun -Signed-off-by: Christian Lamparter -Tested-by: Robert Marko -Cc: Luka Perkov -Link: https://lore.kernel.org/r/20200403114040.349787-1-robert.marko@sartura.hr -Signed-off-by: Bjorn Andersson ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -166,6 +166,7 @@ - <1 4 0xf08>, - <1 1 0xf08>; - clock-frequency = <48000000>; -+ always-on; - }; - - soc { diff --git a/target/linux/ipq40xx/patches-5.4/0005-01-v5.8-net-phy-mdio-add-IPQ4019-MDIO-driver.patch b/target/linux/ipq40xx/patches-5.4/0005-01-v5.8-net-phy-mdio-add-IPQ4019-MDIO-driver.patch deleted file mode 100644 index b48e922fb0..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0005-01-v5.8-net-phy-mdio-add-IPQ4019-MDIO-driver.patch +++ /dev/null @@ -1,210 +0,0 @@ -From 466ed24fb22342f3ae1c10758a6a0c6a8c081b2d Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Thu, 30 Apr 2020 11:07:05 +0200 -Subject: [PATCH] net: phy: mdio: add IPQ4019 MDIO driver - -This patch adds the driver for the MDIO interface -inside of Qualcomm IPQ40xx series SoC-s. - -Signed-off-by: Christian Lamparter -Signed-off-by: Robert Marko -Reviewed-by: Andrew Lunn -Reviewed-by: Florian Fainelli -Cc: Luka Perkov -Signed-off-by: David S. Miller ---- - drivers/net/phy/Kconfig | 7 ++ - drivers/net/phy/Makefile | 1 + - drivers/net/phy/mdio-ipq4019.c | 160 +++++++++++++++++++++++++++++++++ - 3 files changed, 168 insertions(+) - create mode 100644 drivers/net/phy/mdio-ipq4019.c - ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -156,6 +156,13 @@ config MDIO_I2C - - This is library mode. - -+config MDIO_IPQ4019 -+ tristate "Qualcomm IPQ4019 MDIO interface support" -+ depends on HAS_IOMEM && OF_MDIO -+ help -+ This driver supports the MDIO interface found in Qualcomm -+ IPQ40xx series Soc-s. -+ - config MDIO_MOXART - tristate "MOXA ART MDIO interface support" - depends on ARCH_MOXART || COMPILE_TEST ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -49,6 +49,7 @@ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o - obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o - obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o -+obj-$(CONFIG_MDIO_IPQ4019) += mdio-ipq4019.o - obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o - obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o - obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o ---- /dev/null -+++ b/drivers/net/phy/mdio-ipq4019.c -@@ -0,0 +1,160 @@ -+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause -+/* Copyright (c) 2015, The Linux Foundation. All rights reserved. */ -+/* Copyright (c) 2020 Sartura Ltd. */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define MDIO_ADDR_REG 0x44 -+#define MDIO_DATA_WRITE_REG 0x48 -+#define MDIO_DATA_READ_REG 0x4c -+#define MDIO_CMD_REG 0x50 -+#define MDIO_CMD_ACCESS_BUSY BIT(16) -+#define MDIO_CMD_ACCESS_START BIT(8) -+#define MDIO_CMD_ACCESS_CODE_READ 0 -+#define MDIO_CMD_ACCESS_CODE_WRITE 1 -+ -+#define ipq4019_MDIO_TIMEOUT 10000 -+#define ipq4019_MDIO_SLEEP 10 -+ -+struct ipq4019_mdio_data { -+ void __iomem *membase; -+}; -+ -+static int ipq4019_mdio_wait_busy(struct mii_bus *bus) -+{ -+ struct ipq4019_mdio_data *priv = bus->priv; -+ unsigned int busy; -+ -+ return readl_poll_timeout(priv->membase + MDIO_CMD_REG, busy, -+ (busy & MDIO_CMD_ACCESS_BUSY) == 0, -+ ipq4019_MDIO_SLEEP, ipq4019_MDIO_TIMEOUT); -+} -+ -+static int ipq4019_mdio_read(struct mii_bus *bus, int mii_id, int regnum) -+{ -+ struct ipq4019_mdio_data *priv = bus->priv; -+ unsigned int cmd; -+ -+ /* Reject clause 45 */ -+ if (regnum & MII_ADDR_C45) -+ return -EOPNOTSUPP; -+ -+ if (ipq4019_mdio_wait_busy(bus)) -+ return -ETIMEDOUT; -+ -+ /* issue the phy address and reg */ -+ writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG); -+ -+ cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_READ; -+ -+ /* issue read command */ -+ writel(cmd, priv->membase + MDIO_CMD_REG); -+ -+ /* Wait read complete */ -+ if (ipq4019_mdio_wait_busy(bus)) -+ return -ETIMEDOUT; -+ -+ /* Read and return data */ -+ return readl(priv->membase + MDIO_DATA_READ_REG); -+} -+ -+static int ipq4019_mdio_write(struct mii_bus *bus, int mii_id, int regnum, -+ u16 value) -+{ -+ struct ipq4019_mdio_data *priv = bus->priv; -+ unsigned int cmd; -+ -+ /* Reject clause 45 */ -+ if (regnum & MII_ADDR_C45) -+ return -EOPNOTSUPP; -+ -+ if (ipq4019_mdio_wait_busy(bus)) -+ return -ETIMEDOUT; -+ -+ /* issue the phy address and reg */ -+ writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG); -+ -+ /* issue write data */ -+ writel(value, priv->membase + MDIO_DATA_WRITE_REG); -+ -+ cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_WRITE; -+ /* issue write command */ -+ writel(cmd, priv->membase + MDIO_CMD_REG); -+ -+ /* Wait write complete */ -+ if (ipq4019_mdio_wait_busy(bus)) -+ return -ETIMEDOUT; -+ -+ return 0; -+} -+ -+static int ipq4019_mdio_probe(struct platform_device *pdev) -+{ -+ struct ipq4019_mdio_data *priv; -+ struct mii_bus *bus; -+ int ret; -+ -+ bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv)); -+ if (!bus) -+ return -ENOMEM; -+ -+ priv = bus->priv; -+ -+ priv->membase = devm_platform_ioremap_resource(pdev, 0); -+ if (IS_ERR(priv->membase)) -+ return PTR_ERR(priv->membase); -+ -+ bus->name = "ipq4019_mdio"; -+ bus->read = ipq4019_mdio_read; -+ bus->write = ipq4019_mdio_write; -+ bus->parent = &pdev->dev; -+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id); -+ -+ ret = of_mdiobus_register(bus, pdev->dev.of_node); -+ if (ret) { -+ dev_err(&pdev->dev, "Cannot register MDIO bus!\n"); -+ return ret; -+ } -+ -+ platform_set_drvdata(pdev, bus); -+ -+ return 0; -+} -+ -+static int ipq4019_mdio_remove(struct platform_device *pdev) -+{ -+ struct mii_bus *bus = platform_get_drvdata(pdev); -+ -+ mdiobus_unregister(bus); -+ -+ return 0; -+} -+ -+static const struct of_device_id ipq4019_mdio_dt_ids[] = { -+ { .compatible = "qcom,ipq4019-mdio" }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, ipq4019_mdio_dt_ids); -+ -+static struct platform_driver ipq4019_mdio_driver = { -+ .probe = ipq4019_mdio_probe, -+ .remove = ipq4019_mdio_remove, -+ .driver = { -+ .name = "ipq4019-mdio", -+ .of_match_table = ipq4019_mdio_dt_ids, -+ }, -+}; -+ -+module_platform_driver(ipq4019_mdio_driver); -+ -+MODULE_DESCRIPTION("ipq4019 MDIO interface driver"); -+MODULE_AUTHOR("Qualcomm Atheros"); -+MODULE_LICENSE("Dual BSD/GPL"); diff --git a/target/linux/ipq40xx/patches-5.4/0005-02-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch b/target/linux/ipq40xx/patches-5.4/0005-02-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch deleted file mode 100644 index 1976686e8f..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0005-02-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 9c8c0f70ec6fdac2398632c723c48277be09b7c0 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Thu, 30 Apr 2020 11:07:07 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: add MDIO node - -This patch adds the necessary MDIO interface node -to the Qualcomm IPQ4019 DTSI. - -Built-in QCA8337N switch is managed using it, -and since we have a driver for it lets add it. - -Signed-off-by: Christian Lamparter -Signed-off-by: Robert Marko -Reviewed-by: Andrew Lunn -Reviewed-by: Florian Fainelli -Cc: Luka Perkov -Signed-off-by: David S. Miller ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -577,5 +577,33 @@ - "legacy"; - status = "disabled"; - }; -+ -+ mdio: mdio@90000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "qcom,ipq4019-mdio"; -+ reg = <0x90000 0x64>; -+ status = "disabled"; -+ -+ ethphy0: ethernet-phy@0 { -+ reg = <0>; -+ }; -+ -+ ethphy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ -+ ethphy2: ethernet-phy@2 { -+ reg = <2>; -+ }; -+ -+ ethphy3: ethernet-phy@3 { -+ reg = <3>; -+ }; -+ -+ ethphy4: ethernet-phy@4 { -+ reg = <4>; -+ }; -+ }; - }; - }; diff --git a/target/linux/ipq40xx/patches-5.4/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch b/target/linux/ipq40xx/patches-5.4/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch deleted file mode 100644 index 415d6fff99..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: Eneas U de Queiroz -Subject: [PATCH] crypto: qce - add CRYPTO_ALG_KERN_DRIVER_ONLY flag - -Set the CRYPTO_ALG_KERN_DRIVER_ONLY flag to all algorithms exposed by -the qce driver, since they are all hardware accelerated, accessible -through a kernel driver only, and not available directly to userspace. - -Signed-off-by: Eneas U de Queiroz - ---- a/drivers/crypto/qce/ablkcipher.c -+++ b/drivers/crypto/qce/ablkcipher.c -@@ -380,7 +380,7 @@ static int qce_ablkcipher_register_one(c - - alg->cra_priority = 300; - alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC | -- CRYPTO_ALG_NEED_FALLBACK; -+ CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY; - alg->cra_ctxsize = sizeof(struct qce_cipher_ctx); - alg->cra_alignmask = 0; - alg->cra_type = &crypto_ablkcipher_type; ---- a/drivers/crypto/qce/sha.c -+++ b/drivers/crypto/qce/sha.c -@@ -495,7 +495,7 @@ static int qce_ahash_register_one(const - base = &alg->halg.base; - base->cra_blocksize = def->blocksize; - base->cra_priority = 300; -- base->cra_flags = CRYPTO_ALG_ASYNC; -+ base->cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_KERN_DRIVER_ONLY; - base->cra_ctxsize = sizeof(struct qce_sha_ctx); - base->cra_alignmask = 0; - base->cra_module = THIS_MODULE; diff --git a/target/linux/ipq40xx/patches-5.4/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch b/target/linux/ipq40xx/patches-5.4/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch deleted file mode 100644 index 4dcb942150..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch +++ /dev/null @@ -1,993 +0,0 @@ -From f441873642eebf20566c18d2966a8cd4b433ec1c Mon Sep 17 00:00:00 2001 -From: Ard Biesheuvel -Date: Tue, 5 Nov 2019 14:28:17 +0100 -Subject: [PATCH] crypto: qce - switch to skcipher API - -Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface") -dated 20 august 2015 introduced the new skcipher API which is supposed to -replace both blkcipher and ablkcipher. While all consumers of the API have -been converted long ago, some producers of the ablkcipher remain, forcing -us to keep the ablkcipher support routines alive, along with the matching -code to expose [a]blkciphers via the skcipher API. - -So switch this driver to the skcipher API, allowing us to finally drop the -blkcipher code in the near future. - -Reviewed-by: Stanimir Varbanov -Signed-off-by: Ard Biesheuvel -Backported-to-4.19-by: Eneas U de Queiroz - ---- a/drivers/crypto/qce/Makefile -+++ b/drivers/crypto/qce/Makefile -@@ -4,4 +4,4 @@ qcrypto-objs := core.o \ - common.o \ - dma.o \ - sha.o \ -- ablkcipher.o -+ skcipher.o ---- a/drivers/crypto/qce/cipher.h -+++ b/drivers/crypto/qce/cipher.h -@@ -45,12 +45,12 @@ struct qce_cipher_reqctx { - unsigned int cryptlen; - }; - --static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_tfm *tfm) -+static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_skcipher *tfm) - { -- struct crypto_alg *alg = tfm->__crt_alg; -- return container_of(alg, struct qce_alg_template, alg.crypto); -+ struct skcipher_alg *alg = crypto_skcipher_alg(tfm); -+ return container_of(alg, struct qce_alg_template, alg.skcipher); - } - --extern const struct qce_algo_ops ablkcipher_ops; -+extern const struct qce_algo_ops skcipher_ops; - - #endif /* _CIPHER_H_ */ ---- a/drivers/crypto/qce/common.c -+++ b/drivers/crypto/qce/common.c -@@ -304,13 +304,13 @@ go_proc: - return 0; - } - --static int qce_setup_regs_ablkcipher(struct crypto_async_request *async_req, -+static int qce_setup_regs_skcipher(struct crypto_async_request *async_req, - u32 totallen, u32 offset) - { -- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); -- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); -+ struct skcipher_request *req = skcipher_request_cast(async_req); -+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); - struct qce_cipher_ctx *ctx = crypto_tfm_ctx(async_req->tfm); -- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); -+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); - struct qce_device *qce = tmpl->qce; - __be32 enckey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(__be32)] = {0}; - __be32 enciv[QCE_MAX_IV_SIZE / sizeof(__be32)] = {0}; -@@ -389,8 +389,8 @@ int qce_start(struct crypto_async_reques - u32 offset) - { - switch (type) { -- case CRYPTO_ALG_TYPE_ABLKCIPHER: -- return qce_setup_regs_ablkcipher(async_req, totallen, offset); -+ case CRYPTO_ALG_TYPE_SKCIPHER: -+ return qce_setup_regs_skcipher(async_req, totallen, offset); - case CRYPTO_ALG_TYPE_AHASH: - return qce_setup_regs_ahash(async_req, totallen, offset); - default: ---- a/drivers/crypto/qce/common.h -+++ b/drivers/crypto/qce/common.h -@@ -10,6 +10,7 @@ - #include - #include - #include -+#include - - /* key size in bytes */ - #define QCE_SHA_HMAC_KEY_SIZE 64 -@@ -79,7 +80,7 @@ struct qce_alg_template { - unsigned long alg_flags; - const u32 *std_iv; - union { -- struct crypto_alg crypto; -+ struct skcipher_alg skcipher; - struct ahash_alg ahash; - } alg; - struct qce_device *qce; ---- a/drivers/crypto/qce/core.c -+++ b/drivers/crypto/qce/core.c -@@ -22,7 +22,7 @@ - #define QCE_QUEUE_LENGTH 1 - - static const struct qce_algo_ops *qce_ops[] = { -- &ablkcipher_ops, -+ &skcipher_ops, - &ahash_ops, - }; - ---- a/drivers/crypto/qce/ablkcipher.c -+++ /dev/null -@@ -1,440 +0,0 @@ --// SPDX-License-Identifier: GPL-2.0-only --/* -- * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. -- */ -- --#include --#include --#include --#include --#include --#include -- --#include "cipher.h" -- --static LIST_HEAD(ablkcipher_algs); -- --static void qce_ablkcipher_done(void *data) --{ -- struct crypto_async_request *async_req = data; -- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); -- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); -- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); -- struct qce_device *qce = tmpl->qce; -- enum dma_data_direction dir_src, dir_dst; -- u32 status; -- int error; -- bool diff_dst; -- -- diff_dst = (req->src != req->dst) ? true : false; -- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; -- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; -- -- error = qce_dma_terminate_all(&qce->dma); -- if (error) -- dev_dbg(qce->dev, "ablkcipher dma termination error (%d)\n", -- error); -- -- if (diff_dst) -- dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src); -- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -- -- sg_free_table(&rctx->dst_tbl); -- -- error = qce_check_status(qce, &status); -- if (error < 0) -- dev_dbg(qce->dev, "ablkcipher operation error (%x)\n", status); -- -- qce->async_req_done(tmpl->qce, error); --} -- --static int --qce_ablkcipher_async_req_handle(struct crypto_async_request *async_req) --{ -- struct ablkcipher_request *req = ablkcipher_request_cast(async_req); -- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); -- struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req); -- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm); -- struct qce_device *qce = tmpl->qce; -- enum dma_data_direction dir_src, dir_dst; -- struct scatterlist *sg; -- bool diff_dst; -- gfp_t gfp; -- int ret; -- -- rctx->iv = req->info; -- rctx->ivsize = crypto_ablkcipher_ivsize(ablkcipher); -- rctx->cryptlen = req->nbytes; -- -- diff_dst = (req->src != req->dst) ? true : false; -- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; -- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; -- -- rctx->src_nents = sg_nents_for_len(req->src, req->nbytes); -- if (diff_dst) -- rctx->dst_nents = sg_nents_for_len(req->dst, req->nbytes); -- else -- rctx->dst_nents = rctx->src_nents; -- if (rctx->src_nents < 0) { -- dev_err(qce->dev, "Invalid numbers of src SG.\n"); -- return rctx->src_nents; -- } -- if (rctx->dst_nents < 0) { -- dev_err(qce->dev, "Invalid numbers of dst SG.\n"); -- return -rctx->dst_nents; -- } -- -- rctx->dst_nents += 1; -- -- gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? -- GFP_KERNEL : GFP_ATOMIC; -- -- ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp); -- if (ret) -- return ret; -- -- sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); -- -- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); -- if (IS_ERR(sg)) { -- ret = PTR_ERR(sg); -- goto error_free; -- } -- -- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); -- if (IS_ERR(sg)) { -- ret = PTR_ERR(sg); -- goto error_free; -- } -- -- sg_mark_end(sg); -- rctx->dst_sg = rctx->dst_tbl.sgl; -- -- ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -- if (ret < 0) -- goto error_free; -- -- if (diff_dst) { -- ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src); -- if (ret < 0) -- goto error_unmap_dst; -- rctx->src_sg = req->src; -- } else { -- rctx->src_sg = rctx->dst_sg; -- } -- -- ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents, -- rctx->dst_sg, rctx->dst_nents, -- qce_ablkcipher_done, async_req); -- if (ret) -- goto error_unmap_src; -- -- qce_dma_issue_pending(&qce->dma); -- -- ret = qce_start(async_req, tmpl->crypto_alg_type, req->nbytes, 0); -- if (ret) -- goto error_terminate; -- -- return 0; -- --error_terminate: -- qce_dma_terminate_all(&qce->dma); --error_unmap_src: -- if (diff_dst) -- dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src); --error_unmap_dst: -- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); --error_free: -- sg_free_table(&rctx->dst_tbl); -- return ret; --} -- --static int qce_ablkcipher_setkey(struct crypto_ablkcipher *ablk, const u8 *key, -- unsigned int keylen) --{ -- struct crypto_tfm *tfm = crypto_ablkcipher_tfm(ablk); -- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -- int ret; -- -- if (!key || !keylen) -- return -EINVAL; -- -- switch (keylen) { -- case AES_KEYSIZE_128: -- case AES_KEYSIZE_256: -- break; -- default: -- goto fallback; -- } -- -- ctx->enc_keylen = keylen; -- memcpy(ctx->enc_key, key, keylen); -- return 0; --fallback: -- ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen); -- if (!ret) -- ctx->enc_keylen = keylen; -- return ret; --} -- --static int qce_des_setkey(struct crypto_ablkcipher *ablk, const u8 *key, -- unsigned int keylen) --{ -- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk); -- int err; -- -- err = verify_ablkcipher_des_key(ablk, key); -- if (err) -- return err; -- -- ctx->enc_keylen = keylen; -- memcpy(ctx->enc_key, key, keylen); -- return 0; --} -- --static int qce_des3_setkey(struct crypto_ablkcipher *ablk, const u8 *key, -- unsigned int keylen) --{ -- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk); -- int err; -- -- err = verify_ablkcipher_des3_key(ablk, key); -- if (err) -- return err; -- -- ctx->enc_keylen = keylen; -- memcpy(ctx->enc_key, key, keylen); -- return 0; --} -- --static int qce_ablkcipher_crypt(struct ablkcipher_request *req, int encrypt) --{ -- struct crypto_tfm *tfm = -- crypto_ablkcipher_tfm(crypto_ablkcipher_reqtfm(req)); -- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req); -- struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); -- int ret; -- -- rctx->flags = tmpl->alg_flags; -- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; -- -- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && -- ctx->enc_keylen != AES_KEYSIZE_256) { -- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); -- -- skcipher_request_set_sync_tfm(subreq, ctx->fallback); -- skcipher_request_set_callback(subreq, req->base.flags, -- NULL, NULL); -- skcipher_request_set_crypt(subreq, req->src, req->dst, -- req->nbytes, req->info); -- ret = encrypt ? crypto_skcipher_encrypt(subreq) : -- crypto_skcipher_decrypt(subreq); -- skcipher_request_zero(subreq); -- return ret; -- } -- -- return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base); --} -- --static int qce_ablkcipher_encrypt(struct ablkcipher_request *req) --{ -- return qce_ablkcipher_crypt(req, 1); --} -- --static int qce_ablkcipher_decrypt(struct ablkcipher_request *req) --{ -- return qce_ablkcipher_crypt(req, 0); --} -- --static int qce_ablkcipher_init(struct crypto_tfm *tfm) --{ -- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -- -- memset(ctx, 0, sizeof(*ctx)); -- tfm->crt_ablkcipher.reqsize = sizeof(struct qce_cipher_reqctx); -- -- ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(tfm), -- 0, CRYPTO_ALG_NEED_FALLBACK); -- return PTR_ERR_OR_ZERO(ctx->fallback); --} -- --static void qce_ablkcipher_exit(struct crypto_tfm *tfm) --{ -- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -- -- crypto_free_sync_skcipher(ctx->fallback); --} -- --struct qce_ablkcipher_def { -- unsigned long flags; -- const char *name; -- const char *drv_name; -- unsigned int blocksize; -- unsigned int ivsize; -- unsigned int min_keysize; -- unsigned int max_keysize; --}; -- --static const struct qce_ablkcipher_def ablkcipher_def[] = { -- { -- .flags = QCE_ALG_AES | QCE_MODE_ECB, -- .name = "ecb(aes)", -- .drv_name = "ecb-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -- .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_AES | QCE_MODE_CBC, -- .name = "cbc(aes)", -- .drv_name = "cbc-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -- .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_AES | QCE_MODE_CTR, -- .name = "ctr(aes)", -- .drv_name = "ctr-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -- .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_AES | QCE_MODE_XTS, -- .name = "xts(aes)", -- .drv_name = "xts-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -- .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_DES | QCE_MODE_ECB, -- .name = "ecb(des)", -- .drv_name = "ecb-des-qce", -- .blocksize = DES_BLOCK_SIZE, -- .ivsize = 0, -- .min_keysize = DES_KEY_SIZE, -- .max_keysize = DES_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_DES | QCE_MODE_CBC, -- .name = "cbc(des)", -- .drv_name = "cbc-des-qce", -- .blocksize = DES_BLOCK_SIZE, -- .ivsize = DES_BLOCK_SIZE, -- .min_keysize = DES_KEY_SIZE, -- .max_keysize = DES_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_3DES | QCE_MODE_ECB, -- .name = "ecb(des3_ede)", -- .drv_name = "ecb-3des-qce", -- .blocksize = DES3_EDE_BLOCK_SIZE, -- .ivsize = 0, -- .min_keysize = DES3_EDE_KEY_SIZE, -- .max_keysize = DES3_EDE_KEY_SIZE, -- }, -- { -- .flags = QCE_ALG_3DES | QCE_MODE_CBC, -- .name = "cbc(des3_ede)", -- .drv_name = "cbc-3des-qce", -- .blocksize = DES3_EDE_BLOCK_SIZE, -- .ivsize = DES3_EDE_BLOCK_SIZE, -- .min_keysize = DES3_EDE_KEY_SIZE, -- .max_keysize = DES3_EDE_KEY_SIZE, -- }, --}; -- --static int qce_ablkcipher_register_one(const struct qce_ablkcipher_def *def, -- struct qce_device *qce) --{ -- struct qce_alg_template *tmpl; -- struct crypto_alg *alg; -- int ret; -- -- tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL); -- if (!tmpl) -- return -ENOMEM; -- -- alg = &tmpl->alg.crypto; -- -- snprintf(alg->cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name); -- snprintf(alg->cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s", -- def->drv_name); -- -- alg->cra_blocksize = def->blocksize; -- alg->cra_ablkcipher.ivsize = def->ivsize; -- alg->cra_ablkcipher.min_keysize = def->min_keysize; -- alg->cra_ablkcipher.max_keysize = def->max_keysize; -- alg->cra_ablkcipher.setkey = IS_3DES(def->flags) ? qce_des3_setkey : -- IS_DES(def->flags) ? qce_des_setkey : -- qce_ablkcipher_setkey; -- alg->cra_ablkcipher.encrypt = qce_ablkcipher_encrypt; -- alg->cra_ablkcipher.decrypt = qce_ablkcipher_decrypt; -- -- alg->cra_priority = 300; -- alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC | -- CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY; -- alg->cra_ctxsize = sizeof(struct qce_cipher_ctx); -- alg->cra_alignmask = 0; -- alg->cra_type = &crypto_ablkcipher_type; -- alg->cra_module = THIS_MODULE; -- alg->cra_init = qce_ablkcipher_init; -- alg->cra_exit = qce_ablkcipher_exit; -- -- INIT_LIST_HEAD(&tmpl->entry); -- tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_ABLKCIPHER; -- tmpl->alg_flags = def->flags; -- tmpl->qce = qce; -- -- ret = crypto_register_alg(alg); -- if (ret) { -- kfree(tmpl); -- dev_err(qce->dev, "%s registration failed\n", alg->cra_name); -- return ret; -- } -- -- list_add_tail(&tmpl->entry, &ablkcipher_algs); -- dev_dbg(qce->dev, "%s is registered\n", alg->cra_name); -- return 0; --} -- --static void qce_ablkcipher_unregister(struct qce_device *qce) --{ -- struct qce_alg_template *tmpl, *n; -- -- list_for_each_entry_safe(tmpl, n, &ablkcipher_algs, entry) { -- crypto_unregister_alg(&tmpl->alg.crypto); -- list_del(&tmpl->entry); -- kfree(tmpl); -- } --} -- --static int qce_ablkcipher_register(struct qce_device *qce) --{ -- int ret, i; -- -- for (i = 0; i < ARRAY_SIZE(ablkcipher_def); i++) { -- ret = qce_ablkcipher_register_one(&ablkcipher_def[i], qce); -- if (ret) -- goto err; -- } -- -- return 0; --err: -- qce_ablkcipher_unregister(qce); -- return ret; --} -- --const struct qce_algo_ops ablkcipher_ops = { -- .type = CRYPTO_ALG_TYPE_ABLKCIPHER, -- .register_algs = qce_ablkcipher_register, -- .unregister_algs = qce_ablkcipher_unregister, -- .async_req_handle = qce_ablkcipher_async_req_handle, --}; ---- /dev/null -+++ b/drivers/crypto/qce/skcipher.c -@@ -0,0 +1,440 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+/* -+ * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "cipher.h" -+ -+static LIST_HEAD(skcipher_algs); -+ -+static void qce_skcipher_done(void *data) -+{ -+ struct crypto_async_request *async_req = data; -+ struct skcipher_request *req = skcipher_request_cast(async_req); -+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); -+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); -+ struct qce_device *qce = tmpl->qce; -+ enum dma_data_direction dir_src, dir_dst; -+ u32 status; -+ int error; -+ bool diff_dst; -+ -+ diff_dst = (req->src != req->dst) ? true : false; -+ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; -+ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; -+ -+ error = qce_dma_terminate_all(&qce->dma); -+ if (error) -+ dev_dbg(qce->dev, "skcipher dma termination error (%d)\n", -+ error); -+ -+ if (diff_dst) -+ dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src); -+ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -+ -+ sg_free_table(&rctx->dst_tbl); -+ -+ error = qce_check_status(qce, &status); -+ if (error < 0) -+ dev_dbg(qce->dev, "skcipher operation error (%x)\n", status); -+ -+ qce->async_req_done(tmpl->qce, error); -+} -+ -+static int -+qce_skcipher_async_req_handle(struct crypto_async_request *async_req) -+{ -+ struct skcipher_request *req = skcipher_request_cast(async_req); -+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); -+ struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req); -+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); -+ struct qce_device *qce = tmpl->qce; -+ enum dma_data_direction dir_src, dir_dst; -+ struct scatterlist *sg; -+ bool diff_dst; -+ gfp_t gfp; -+ int ret; -+ -+ rctx->iv = req->iv; -+ rctx->ivsize = crypto_skcipher_ivsize(skcipher); -+ rctx->cryptlen = req->cryptlen; -+ -+ diff_dst = (req->src != req->dst) ? true : false; -+ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL; -+ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL; -+ -+ rctx->src_nents = sg_nents_for_len(req->src, req->cryptlen); -+ if (diff_dst) -+ rctx->dst_nents = sg_nents_for_len(req->dst, req->cryptlen); -+ else -+ rctx->dst_nents = rctx->src_nents; -+ if (rctx->src_nents < 0) { -+ dev_err(qce->dev, "Invalid numbers of src SG.\n"); -+ return rctx->src_nents; -+ } -+ if (rctx->dst_nents < 0) { -+ dev_err(qce->dev, "Invalid numbers of dst SG.\n"); -+ return -rctx->dst_nents; -+ } -+ -+ rctx->dst_nents += 1; -+ -+ gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? -+ GFP_KERNEL : GFP_ATOMIC; -+ -+ ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp); -+ if (ret) -+ return ret; -+ -+ sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); -+ -+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); -+ if (IS_ERR(sg)) { -+ ret = PTR_ERR(sg); -+ goto error_free; -+ } -+ -+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); -+ if (IS_ERR(sg)) { -+ ret = PTR_ERR(sg); -+ goto error_free; -+ } -+ -+ sg_mark_end(sg); -+ rctx->dst_sg = rctx->dst_tbl.sgl; -+ -+ ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -+ if (ret < 0) -+ goto error_free; -+ -+ if (diff_dst) { -+ ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src); -+ if (ret < 0) -+ goto error_unmap_dst; -+ rctx->src_sg = req->src; -+ } else { -+ rctx->src_sg = rctx->dst_sg; -+ } -+ -+ ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents, -+ rctx->dst_sg, rctx->dst_nents, -+ qce_skcipher_done, async_req); -+ if (ret) -+ goto error_unmap_src; -+ -+ qce_dma_issue_pending(&qce->dma); -+ -+ ret = qce_start(async_req, tmpl->crypto_alg_type, req->cryptlen, 0); -+ if (ret) -+ goto error_terminate; -+ -+ return 0; -+ -+error_terminate: -+ qce_dma_terminate_all(&qce->dma); -+error_unmap_src: -+ if (diff_dst) -+ dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src); -+error_unmap_dst: -+ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst); -+error_free: -+ sg_free_table(&rctx->dst_tbl); -+ return ret; -+} -+ -+static int qce_skcipher_setkey(struct crypto_skcipher *ablk, const u8 *key, -+ unsigned int keylen) -+{ -+ struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk); -+ struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ int ret; -+ -+ if (!key || !keylen) -+ return -EINVAL; -+ -+ switch (keylen) { -+ case AES_KEYSIZE_128: -+ case AES_KEYSIZE_256: -+ break; -+ default: -+ goto fallback; -+ } -+ -+ ctx->enc_keylen = keylen; -+ memcpy(ctx->enc_key, key, keylen); -+ return 0; -+fallback: -+ ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen); -+ if (!ret) -+ ctx->enc_keylen = keylen; -+ return ret; -+} -+ -+static int qce_des_setkey(struct crypto_skcipher *ablk, const u8 *key, -+ unsigned int keylen) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk); -+ int err; -+ -+ err = verify_skcipher_des_key(ablk, key); -+ if (err) -+ return err; -+ -+ ctx->enc_keylen = keylen; -+ memcpy(ctx->enc_key, key, keylen); -+ return 0; -+} -+ -+static int qce_des3_setkey(struct crypto_skcipher *ablk, const u8 *key, -+ unsigned int keylen) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk); -+ int err; -+ -+ err = verify_skcipher_des3_key(ablk, key); -+ if (err) -+ return err; -+ -+ ctx->enc_keylen = keylen; -+ memcpy(ctx->enc_key, key, keylen); -+ return 0; -+} -+ -+static int qce_skcipher_crypt(struct skcipher_request *req, int encrypt) -+{ -+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); -+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); -+ struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); -+ int ret; -+ -+ rctx->flags = tmpl->alg_flags; -+ rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; -+ -+ if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && -+ ctx->enc_keylen != AES_KEYSIZE_256) { -+ SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); -+ -+ skcipher_request_set_sync_tfm(subreq, ctx->fallback); -+ skcipher_request_set_callback(subreq, req->base.flags, -+ NULL, NULL); -+ skcipher_request_set_crypt(subreq, req->src, req->dst, -+ req->cryptlen, req->iv); -+ ret = encrypt ? crypto_skcipher_encrypt(subreq) : -+ crypto_skcipher_decrypt(subreq); -+ skcipher_request_zero(subreq); -+ return ret; -+ } -+ -+ return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base); -+} -+ -+static int qce_skcipher_encrypt(struct skcipher_request *req) -+{ -+ return qce_skcipher_crypt(req, 1); -+} -+ -+static int qce_skcipher_decrypt(struct skcipher_request *req) -+{ -+ return qce_skcipher_crypt(req, 0); -+} -+ -+static int qce_skcipher_init(struct crypto_skcipher *tfm) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); -+ -+ memset(ctx, 0, sizeof(*ctx)); -+ crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx)); -+ -+ ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base), -+ 0, CRYPTO_ALG_NEED_FALLBACK); -+ return PTR_ERR_OR_ZERO(ctx->fallback); -+} -+ -+static void qce_skcipher_exit(struct crypto_skcipher *tfm) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); -+ -+ crypto_free_sync_skcipher(ctx->fallback); -+} -+ -+struct qce_skcipher_def { -+ unsigned long flags; -+ const char *name; -+ const char *drv_name; -+ unsigned int blocksize; -+ unsigned int ivsize; -+ unsigned int min_keysize; -+ unsigned int max_keysize; -+}; -+ -+static const struct qce_skcipher_def skcipher_def[] = { -+ { -+ .flags = QCE_ALG_AES | QCE_MODE_ECB, -+ .name = "ecb(aes)", -+ .drv_name = "ecb-aes-qce", -+ .blocksize = AES_BLOCK_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_AES | QCE_MODE_CBC, -+ .name = "cbc(aes)", -+ .drv_name = "cbc-aes-qce", -+ .blocksize = AES_BLOCK_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_AES | QCE_MODE_CTR, -+ .name = "ctr(aes)", -+ .drv_name = "ctr-aes-qce", -+ .blocksize = AES_BLOCK_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_AES | QCE_MODE_XTS, -+ .name = "xts(aes)", -+ .drv_name = "xts-aes-qce", -+ .blocksize = AES_BLOCK_SIZE, -+ .ivsize = AES_BLOCK_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE, -+ .max_keysize = AES_MAX_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_DES | QCE_MODE_ECB, -+ .name = "ecb(des)", -+ .drv_name = "ecb-des-qce", -+ .blocksize = DES_BLOCK_SIZE, -+ .ivsize = 0, -+ .min_keysize = DES_KEY_SIZE, -+ .max_keysize = DES_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_DES | QCE_MODE_CBC, -+ .name = "cbc(des)", -+ .drv_name = "cbc-des-qce", -+ .blocksize = DES_BLOCK_SIZE, -+ .ivsize = DES_BLOCK_SIZE, -+ .min_keysize = DES_KEY_SIZE, -+ .max_keysize = DES_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_3DES | QCE_MODE_ECB, -+ .name = "ecb(des3_ede)", -+ .drv_name = "ecb-3des-qce", -+ .blocksize = DES3_EDE_BLOCK_SIZE, -+ .ivsize = 0, -+ .min_keysize = DES3_EDE_KEY_SIZE, -+ .max_keysize = DES3_EDE_KEY_SIZE, -+ }, -+ { -+ .flags = QCE_ALG_3DES | QCE_MODE_CBC, -+ .name = "cbc(des3_ede)", -+ .drv_name = "cbc-3des-qce", -+ .blocksize = DES3_EDE_BLOCK_SIZE, -+ .ivsize = DES3_EDE_BLOCK_SIZE, -+ .min_keysize = DES3_EDE_KEY_SIZE, -+ .max_keysize = DES3_EDE_KEY_SIZE, -+ }, -+}; -+ -+static int qce_skcipher_register_one(const struct qce_skcipher_def *def, -+ struct qce_device *qce) -+{ -+ struct qce_alg_template *tmpl; -+ struct skcipher_alg *alg; -+ int ret; -+ -+ tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL); -+ if (!tmpl) -+ return -ENOMEM; -+ -+ alg = &tmpl->alg.skcipher; -+ -+ snprintf(alg->base.cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name); -+ snprintf(alg->base.cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s", -+ def->drv_name); -+ -+ alg->base.cra_blocksize = def->blocksize; -+ alg->ivsize = def->ivsize; -+ alg->min_keysize = def->min_keysize; -+ alg->max_keysize = def->max_keysize; -+ alg->setkey = IS_3DES(def->flags) ? qce_des3_setkey : -+ IS_DES(def->flags) ? qce_des_setkey : -+ qce_skcipher_setkey; -+ alg->encrypt = qce_skcipher_encrypt; -+ alg->decrypt = qce_skcipher_decrypt; -+ -+ alg->base.cra_priority = 300; -+ alg->base.cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_NEED_FALLBACK | -+ CRYPTO_ALG_KERN_DRIVER_ONLY; -+ alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx); -+ alg->base.cra_alignmask = 0; -+ alg->base.cra_module = THIS_MODULE; -+ -+ alg->init = qce_skcipher_init; -+ alg->exit = qce_skcipher_exit; -+ -+ INIT_LIST_HEAD(&tmpl->entry); -+ tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER; -+ tmpl->alg_flags = def->flags; -+ tmpl->qce = qce; -+ -+ ret = crypto_register_skcipher(alg); -+ if (ret) { -+ kfree(tmpl); -+ dev_err(qce->dev, "%s registration failed\n", alg->base.cra_name); -+ return ret; -+ } -+ -+ list_add_tail(&tmpl->entry, &skcipher_algs); -+ dev_dbg(qce->dev, "%s is registered\n", alg->base.cra_name); -+ return 0; -+} -+ -+static void qce_skcipher_unregister(struct qce_device *qce) -+{ -+ struct qce_alg_template *tmpl, *n; -+ -+ list_for_each_entry_safe(tmpl, n, &skcipher_algs, entry) { -+ crypto_unregister_skcipher(&tmpl->alg.skcipher); -+ list_del(&tmpl->entry); -+ kfree(tmpl); -+ } -+} -+ -+static int qce_skcipher_register(struct qce_device *qce) -+{ -+ int ret, i; -+ -+ for (i = 0; i < ARRAY_SIZE(skcipher_def); i++) { -+ ret = qce_skcipher_register_one(&skcipher_def[i], qce); -+ if (ret) -+ goto err; -+ } -+ -+ return 0; -+err: -+ qce_skcipher_unregister(qce); -+ return ret; -+} -+ -+const struct qce_algo_ops skcipher_ops = { -+ .type = CRYPTO_ALG_TYPE_SKCIPHER, -+ .register_algs = qce_skcipher_register, -+ .unregister_algs = qce_skcipher_unregister, -+ .async_req_handle = qce_skcipher_async_req_handle, -+}; diff --git a/target/linux/ipq40xx/patches-5.4/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch b/target/linux/ipq40xx/patches-5.4/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch deleted file mode 100644 index ac4f163f4a..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch +++ /dev/null @@ -1,43 +0,0 @@ -From bb5c863b3d3cbd10e80b2ebf409934a091058f54 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 20 Dec 2019 16:02:13 -0300 -Subject: [PATCH 02/11] crypto: qce - fix ctr-aes-qce block, chunk sizes - -Set blocksize of ctr-aes-qce to 1, so it can operate as a stream cipher, -adding the definition for chucksize instead, where the underlying block -size belongs. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/skcipher.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -270,6 +270,7 @@ struct qce_skcipher_def { - const char *name; - const char *drv_name; - unsigned int blocksize; -+ unsigned int chunksize; - unsigned int ivsize; - unsigned int min_keysize; - unsigned int max_keysize; -@@ -298,7 +299,8 @@ static const struct qce_skcipher_def skc - .flags = QCE_ALG_AES | QCE_MODE_CTR, - .name = "ctr(aes)", - .drv_name = "ctr-aes-qce", -- .blocksize = AES_BLOCK_SIZE, -+ .blocksize = 1, -+ .chunksize = AES_BLOCK_SIZE, - .ivsize = AES_BLOCK_SIZE, - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, -@@ -368,6 +370,7 @@ static int qce_skcipher_register_one(con - def->drv_name); - - alg->base.cra_blocksize = def->blocksize; -+ alg->chunksize = def->chunksize; - alg->ivsize = def->ivsize; - alg->min_keysize = def->min_keysize; - alg->max_keysize = def->max_keysize; diff --git a/target/linux/ipq40xx/patches-5.4/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch b/target/linux/ipq40xx/patches-5.4/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch deleted file mode 100644 index 4dcf1ac726..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 7de4c2bd196f111e39cc60f6197654aff23ba2b4 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 20 Dec 2019 16:02:14 -0300 -Subject: [PATCH 03/11] crypto: qce - fix xts-aes-qce key sizes - -XTS-mode uses two keys, so the keysizes should be doubled in -skcipher_def, and halved when checking if it is AES-128/192/256. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/skcipher.c | 13 ++++++++----- - 1 file changed, 8 insertions(+), 5 deletions(-) - ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -154,12 +154,13 @@ static int qce_skcipher_setkey(struct cr - { - struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk); - struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ unsigned long flags = to_cipher_tmpl(ablk)->alg_flags; - int ret; - - if (!key || !keylen) - return -EINVAL; - -- switch (keylen) { -+ switch (IS_XTS(flags) ? keylen >> 1 : keylen) { - case AES_KEYSIZE_128: - case AES_KEYSIZE_256: - break; -@@ -213,13 +214,15 @@ static int qce_skcipher_crypt(struct skc - struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); - struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); - struct qce_alg_template *tmpl = to_cipher_tmpl(tfm); -+ int keylen; - int ret; - - rctx->flags = tmpl->alg_flags; - rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; -+ keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; - -- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 && -- ctx->enc_keylen != AES_KEYSIZE_256) { -+ if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 && -+ keylen != AES_KEYSIZE_256) { - SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); - - skcipher_request_set_sync_tfm(subreq, ctx->fallback); -@@ -311,8 +314,8 @@ static const struct qce_skcipher_def skc - .drv_name = "xts-aes-qce", - .blocksize = AES_BLOCK_SIZE, - .ivsize = AES_BLOCK_SIZE, -- .min_keysize = AES_MIN_KEY_SIZE, -- .max_keysize = AES_MAX_KEY_SIZE, -+ .min_keysize = AES_MIN_KEY_SIZE * 2, -+ .max_keysize = AES_MAX_KEY_SIZE * 2, - }, - { - .flags = QCE_ALG_DES | QCE_MODE_ECB, diff --git a/target/linux/ipq40xx/patches-5.4/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch b/target/linux/ipq40xx/patches-5.4/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch deleted file mode 100644 index 2385d483f2..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 3ee50c896d712dc2fc8f34c2cd1918d035e74045 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 20 Dec 2019 16:02:15 -0300 -Subject: [PATCH 04/11] crypto: qce - save a sg table slot for result buf - -When ctr-aes-qce is used for gcm-mode, an extra sg entry for the -authentication tag is present, causing trouble when the qce driver -prepares the dst-results sg table for dma. - -It computes the number of entries needed with sg_nents_for_len, leaving -out the tag entry. Then it creates a sg table with that number plus -one, used to store a result buffer. - -When copying the sg table, there's no limit to the number of entries -copied, so the extra slot is filled with the authentication tag sg. -When the driver tries to add the result sg, the list is full, and it -returns EINVAL. - -By limiting the number of sg entries copied to the dest table, the slot -for the result buffer is guaranteed to be unused. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/dma.c | 6 ++++-- - drivers/crypto/qce/dma.h | 3 ++- - drivers/crypto/qce/skcipher.c | 4 ++-- - 3 files changed, 8 insertions(+), 5 deletions(-) - ---- a/drivers/crypto/qce/dma.c -+++ b/drivers/crypto/qce/dma.c -@@ -47,7 +47,8 @@ void qce_dma_release(struct qce_dma_data - } - - struct scatterlist * --qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl) -+qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl, -+ int max_ents) - { - struct scatterlist *sg = sgt->sgl, *sg_last = NULL; - -@@ -60,12 +61,13 @@ qce_sgtable_add(struct sg_table *sgt, st - if (!sg) - return ERR_PTR(-EINVAL); - -- while (new_sgl && sg) { -+ while (new_sgl && sg && max_ents) { - sg_set_page(sg, sg_page(new_sgl), new_sgl->length, - new_sgl->offset); - sg_last = sg; - sg = sg_next(sg); - new_sgl = sg_next(new_sgl); -+ max_ents--; - } - - return sg_last; ---- a/drivers/crypto/qce/dma.h -+++ b/drivers/crypto/qce/dma.h -@@ -42,6 +42,7 @@ int qce_dma_prep_sgs(struct qce_dma_data - void qce_dma_issue_pending(struct qce_dma_data *dma); - int qce_dma_terminate_all(struct qce_dma_data *dma); - struct scatterlist * --qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add); -+qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add, -+ int max_ents); - - #endif /* _DMA_H_ */ ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -95,13 +95,13 @@ qce_skcipher_async_req_handle(struct cry - - sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); - -- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst); -+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1); - if (IS_ERR(sg)) { - ret = PTR_ERR(sg); - goto error_free; - } - -- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg); -+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1); - if (IS_ERR(sg)) { - ret = PTR_ERR(sg); - goto error_free; diff --git a/target/linux/ipq40xx/patches-5.4/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch b/target/linux/ipq40xx/patches-5.4/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch deleted file mode 100644 index 5efdb72c44..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 3e806a12d10af2581aa26c37b58439286eab9782 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 20 Dec 2019 16:02:16 -0300 -Subject: [PATCH 05/11] crypto: qce - update the skcipher IV - -Update the IV after the completion of each cipher operation. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/skcipher.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -21,6 +21,7 @@ static void qce_skcipher_done(void *data - struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req); - struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req)); - struct qce_device *qce = tmpl->qce; -+ struct qce_result_dump *result_buf = qce->dma.result_buf; - enum dma_data_direction dir_src, dir_dst; - u32 status; - int error; -@@ -45,6 +46,7 @@ static void qce_skcipher_done(void *data - if (error < 0) - dev_dbg(qce->dev, "skcipher operation error (%x)\n", status); - -+ memcpy(rctx->iv, result_buf->encr_cntr_iv, rctx->ivsize); - qce->async_req_done(tmpl->qce, error); - } - diff --git a/target/linux/ipq40xx/patches-5.4/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch b/target/linux/ipq40xx/patches-5.4/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch deleted file mode 100644 index 84aef04ef4..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 8ceda883205db6dfedb82e39f67feae3b50c95a1 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 20 Dec 2019 16:02:17 -0300 -Subject: [PATCH 06/11] crypto: qce - initialize fallback only for AES - -Adjust cra_flags to add CRYPTO_NEED_FALLBACK only for AES ciphers, where -AES-192 is not handled by the qce hardware, and don't allocate & free -the fallback skcipher for other algorithms. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/skcipher.c | 17 ++++++++++++++--- - 1 file changed, 14 insertions(+), 3 deletions(-) - ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -257,7 +257,14 @@ static int qce_skcipher_init(struct cryp - - memset(ctx, 0, sizeof(*ctx)); - crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx)); -+ return 0; -+} -+ -+static int qce_skcipher_init_fallback(struct crypto_skcipher *tfm) -+{ -+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm); - -+ qce_skcipher_init(tfm); - ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base), - 0, CRYPTO_ALG_NEED_FALLBACK); - return PTR_ERR_OR_ZERO(ctx->fallback); -@@ -387,14 +394,18 @@ static int qce_skcipher_register_one(con - - alg->base.cra_priority = 300; - alg->base.cra_flags = CRYPTO_ALG_ASYNC | -- CRYPTO_ALG_NEED_FALLBACK | - CRYPTO_ALG_KERN_DRIVER_ONLY; - alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx); - alg->base.cra_alignmask = 0; - alg->base.cra_module = THIS_MODULE; - -- alg->init = qce_skcipher_init; -- alg->exit = qce_skcipher_exit; -+ if (IS_AES(def->flags)) { -+ alg->base.cra_flags |= CRYPTO_ALG_NEED_FALLBACK; -+ alg->init = qce_skcipher_init_fallback; -+ alg->exit = qce_skcipher_exit; -+ } else { -+ alg->init = qce_skcipher_init; -+ } - - INIT_LIST_HEAD(&tmpl->entry); - tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER; diff --git a/target/linux/ipq40xx/patches-5.4/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch b/target/linux/ipq40xx/patches-5.4/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch deleted file mode 100644 index 5b1372d08f..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch +++ /dev/null @@ -1,419 +0,0 @@ -From 59e056cda4beb5412e3653e6360c2eb0fa770baa Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 20 Dec 2019 16:02:18 -0300 -Subject: [PATCH 07/11] crypto: qce - allow building only hashes/ciphers - -Allow the user to choose whether to build support for all algorithms -(default), hashes-only, or skciphers-only. - -The QCE engine does not appear to scale as well as the CPU to handle -multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the -QCE handles only 2 requests in parallel. - -Ipsec throughput seems to improve when disabling either family of -algorithms, sharing the load with the CPU. Enabling skciphers-only -appears to work best. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -617,6 +617,14 @@ config CRYPTO_DEV_QCE - tristate "Qualcomm crypto engine accelerator" - depends on ARCH_QCOM || COMPILE_TEST - depends on HAS_IOMEM -+ help -+ This driver supports Qualcomm crypto engine accelerator -+ hardware. To compile this driver as a module, choose M here. The -+ module will be called qcrypto. -+ -+config CRYPTO_DEV_QCE_SKCIPHER -+ bool -+ depends on CRYPTO_DEV_QCE - select CRYPTO_AES - select CRYPTO_LIB_DES - select CRYPTO_ECB -@@ -624,10 +632,57 @@ config CRYPTO_DEV_QCE - select CRYPTO_XTS - select CRYPTO_CTR - select CRYPTO_BLKCIPHER -+ -+config CRYPTO_DEV_QCE_SHA -+ bool -+ depends on CRYPTO_DEV_QCE -+ -+choice -+ prompt "Algorithms enabled for QCE acceleration" -+ default CRYPTO_DEV_QCE_ENABLE_ALL -+ depends on CRYPTO_DEV_QCE - help -- This driver supports Qualcomm crypto engine accelerator -- hardware. To compile this driver as a module, choose M here. The -- module will be called qcrypto. -+ This option allows to choose whether to build support for all algorihtms -+ (default), hashes-only, or skciphers-only. -+ -+ The QCE engine does not appear to scale as well as the CPU to handle -+ multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the -+ QCE handles only 2 requests in parallel. -+ -+ Ipsec throughput seems to improve when disabling either family of -+ algorithms, sharing the load with the CPU. Enabling skciphers-only -+ appears to work best. -+ -+ config CRYPTO_DEV_QCE_ENABLE_ALL -+ bool "All supported algorithms" -+ select CRYPTO_DEV_QCE_SKCIPHER -+ select CRYPTO_DEV_QCE_SHA -+ help -+ Enable all supported algorithms: -+ - AES (CBC, CTR, ECB, XTS) -+ - 3DES (CBC, ECB) -+ - DES (CBC, ECB) -+ - SHA1, HMAC-SHA1 -+ - SHA256, HMAC-SHA256 -+ -+ config CRYPTO_DEV_QCE_ENABLE_SKCIPHER -+ bool "Symmetric-key ciphers only" -+ select CRYPTO_DEV_QCE_SKCIPHER -+ help -+ Enable symmetric-key ciphers only: -+ - AES (CBC, CTR, ECB, XTS) -+ - 3DES (ECB, CBC) -+ - DES (ECB, CBC) -+ -+ config CRYPTO_DEV_QCE_ENABLE_SHA -+ bool "Hash/HMAC only" -+ select CRYPTO_DEV_QCE_SHA -+ help -+ Enable hashes/HMAC algorithms only: -+ - SHA1, HMAC-SHA1 -+ - SHA256, HMAC-SHA256 -+ -+endchoice - - config CRYPTO_DEV_QCOM_RNG - tristate "Qualcomm Random Number Generator Driver" ---- a/drivers/crypto/qce/Makefile -+++ b/drivers/crypto/qce/Makefile -@@ -2,6 +2,7 @@ - obj-$(CONFIG_CRYPTO_DEV_QCE) += qcrypto.o - qcrypto-objs := core.o \ - common.o \ -- dma.o \ -- sha.o \ -- skcipher.o -+ dma.o -+ -+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SHA) += sha.o -+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SKCIPHER) += skcipher.o ---- a/drivers/crypto/qce/common.c -+++ b/drivers/crypto/qce/common.c -@@ -45,52 +45,56 @@ qce_clear_array(struct qce_device *qce, - qce_write(qce, offset + i * sizeof(u32), 0); - } - --static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size) -+static u32 qce_config_reg(struct qce_device *qce, int little) - { -- u32 cfg = 0; -+ u32 beats = (qce->burst_size >> 3) - 1; -+ u32 pipe_pair = qce->pipe_pair_id; -+ u32 config; - -- if (IS_AES(flags)) { -- if (aes_key_size == AES_KEYSIZE_128) -- cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT; -- else if (aes_key_size == AES_KEYSIZE_256) -- cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT; -- } -+ config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK; -+ config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) | -+ BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT); -+ config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK; -+ config &= ~HIGH_SPD_EN_N_SHIFT; - -- if (IS_AES(flags)) -- cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT; -- else if (IS_DES(flags) || IS_3DES(flags)) -- cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT; -+ if (little) -+ config |= BIT(LITTLE_ENDIAN_MODE_SHIFT); - -- if (IS_DES(flags)) -- cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT; -+ return config; -+} - -- if (IS_3DES(flags)) -- cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT; -+void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len) -+{ -+ __be32 *d = dst; -+ const u8 *s = src; -+ unsigned int n; - -- switch (flags & QCE_MODE_MASK) { -- case QCE_MODE_ECB: -- cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT; -- break; -- case QCE_MODE_CBC: -- cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT; -- break; -- case QCE_MODE_CTR: -- cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT; -- break; -- case QCE_MODE_XTS: -- cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT; -- break; -- case QCE_MODE_CCM: -- cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT; -- cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT; -- break; -- default: -- return ~0; -+ n = len / sizeof(u32); -+ for (; n > 0; n--) { -+ *d = cpu_to_be32p((const __u32 *) s); -+ s += sizeof(__u32); -+ d++; - } -+} - -- return cfg; -+static void qce_setup_config(struct qce_device *qce) -+{ -+ u32 config; -+ -+ /* get big endianness */ -+ config = qce_config_reg(qce, 0); -+ -+ /* clear status */ -+ qce_write(qce, REG_STATUS, 0); -+ qce_write(qce, REG_CONFIG, config); -+} -+ -+static inline void qce_crypto_go(struct qce_device *qce) -+{ -+ qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT)); - } - -+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA - static u32 qce_auth_cfg(unsigned long flags, u32 key_size) - { - u32 cfg = 0; -@@ -137,88 +141,6 @@ static u32 qce_auth_cfg(unsigned long fl - return cfg; - } - --static u32 qce_config_reg(struct qce_device *qce, int little) --{ -- u32 beats = (qce->burst_size >> 3) - 1; -- u32 pipe_pair = qce->pipe_pair_id; -- u32 config; -- -- config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK; -- config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) | -- BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT); -- config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK; -- config &= ~HIGH_SPD_EN_N_SHIFT; -- -- if (little) -- config |= BIT(LITTLE_ENDIAN_MODE_SHIFT); -- -- return config; --} -- --void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len) --{ -- __be32 *d = dst; -- const u8 *s = src; -- unsigned int n; -- -- n = len / sizeof(u32); -- for (; n > 0; n--) { -- *d = cpu_to_be32p((const __u32 *) s); -- s += sizeof(__u32); -- d++; -- } --} -- --static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize) --{ -- u8 swap[QCE_AES_IV_LENGTH]; -- u32 i, j; -- -- if (ivsize > QCE_AES_IV_LENGTH) -- return; -- -- memset(swap, 0, QCE_AES_IV_LENGTH); -- -- for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1; -- i < QCE_AES_IV_LENGTH; i++, j--) -- swap[i] = src[j]; -- -- qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH); --} -- --static void qce_xtskey(struct qce_device *qce, const u8 *enckey, -- unsigned int enckeylen, unsigned int cryptlen) --{ -- u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0}; -- unsigned int xtsklen = enckeylen / (2 * sizeof(u32)); -- unsigned int xtsdusize; -- -- qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2, -- enckeylen / 2); -- qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen); -- -- /* xts du size 512B */ -- xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen); -- qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize); --} -- --static void qce_setup_config(struct qce_device *qce) --{ -- u32 config; -- -- /* get big endianness */ -- config = qce_config_reg(qce, 0); -- -- /* clear status */ -- qce_write(qce, REG_STATUS, 0); -- qce_write(qce, REG_CONFIG, config); --} -- --static inline void qce_crypto_go(struct qce_device *qce) --{ -- qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT)); --} -- - static int qce_setup_regs_ahash(struct crypto_async_request *async_req, - u32 totallen, u32 offset) - { -@@ -303,6 +225,87 @@ go_proc: - - return 0; - } -+#endif -+ -+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER -+static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size) -+{ -+ u32 cfg = 0; -+ -+ if (IS_AES(flags)) { -+ if (aes_key_size == AES_KEYSIZE_128) -+ cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT; -+ else if (aes_key_size == AES_KEYSIZE_256) -+ cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT; -+ } -+ -+ if (IS_AES(flags)) -+ cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT; -+ else if (IS_DES(flags) || IS_3DES(flags)) -+ cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT; -+ -+ if (IS_DES(flags)) -+ cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT; -+ -+ if (IS_3DES(flags)) -+ cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT; -+ -+ switch (flags & QCE_MODE_MASK) { -+ case QCE_MODE_ECB: -+ cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT; -+ break; -+ case QCE_MODE_CBC: -+ cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT; -+ break; -+ case QCE_MODE_CTR: -+ cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT; -+ break; -+ case QCE_MODE_XTS: -+ cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT; -+ break; -+ case QCE_MODE_CCM: -+ cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT; -+ cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT; -+ break; -+ default: -+ return ~0; -+ } -+ -+ return cfg; -+} -+ -+static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize) -+{ -+ u8 swap[QCE_AES_IV_LENGTH]; -+ u32 i, j; -+ -+ if (ivsize > QCE_AES_IV_LENGTH) -+ return; -+ -+ memset(swap, 0, QCE_AES_IV_LENGTH); -+ -+ for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1; -+ i < QCE_AES_IV_LENGTH; i++, j--) -+ swap[i] = src[j]; -+ -+ qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH); -+} -+ -+static void qce_xtskey(struct qce_device *qce, const u8 *enckey, -+ unsigned int enckeylen, unsigned int cryptlen) -+{ -+ u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0}; -+ unsigned int xtsklen = enckeylen / (2 * sizeof(u32)); -+ unsigned int xtsdusize; -+ -+ qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2, -+ enckeylen / 2); -+ qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen); -+ -+ /* xts du size 512B */ -+ xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen); -+ qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize); -+} - - static int qce_setup_regs_skcipher(struct crypto_async_request *async_req, - u32 totallen, u32 offset) -@@ -384,15 +387,20 @@ static int qce_setup_regs_skcipher(struc - - return 0; - } -+#endif - - int qce_start(struct crypto_async_request *async_req, u32 type, u32 totallen, - u32 offset) - { - switch (type) { -+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER - case CRYPTO_ALG_TYPE_SKCIPHER: - return qce_setup_regs_skcipher(async_req, totallen, offset); -+#endif -+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA - case CRYPTO_ALG_TYPE_AHASH: - return qce_setup_regs_ahash(async_req, totallen, offset); -+#endif - default: - return -EINVAL; - } ---- a/drivers/crypto/qce/core.c -+++ b/drivers/crypto/qce/core.c -@@ -22,8 +22,12 @@ - #define QCE_QUEUE_LENGTH 1 - - static const struct qce_algo_ops *qce_ops[] = { -+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER - &skcipher_ops, -+#endif -+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA - &ahash_ops, -+#endif - }; - - static void qce_unregister_algs(struct qce_device *qce) diff --git a/target/linux/ipq40xx/patches-5.4/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch b/target/linux/ipq40xx/patches-5.4/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch deleted file mode 100644 index 160420b485..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch +++ /dev/null @@ -1,89 +0,0 @@ -From d6364b8128439a8c0e381f80c38667de9f15eef8 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 7 Feb 2020 12:02:25 -0300 -Subject: [PATCH 09/11] crypto: qce - use cryptlen when adding extra sgl - -The qce crypto driver appends an extra entry to the dst sgl, to maintain -private state information. - -When the gcm driver sends requests to the ctr skcipher, it passes the -authentication tag after the actual crypto payload, but it must not be -touched. - -Commit 1336c2221bee ("crypto: qce - save a sg table slot for result -buf") limited the destination sgl to avoid overwriting the -authentication tag but it assumed the tag would be in a separate sgl -entry. - -This is not always the case, so it is better to limit the length of the -destination buffer to req->cryptlen before appending the result buf. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/dma.c | 11 ++++++----- - drivers/crypto/qce/dma.h | 2 +- - drivers/crypto/qce/skcipher.c | 5 +++-- - 3 files changed, 10 insertions(+), 8 deletions(-) - ---- a/drivers/crypto/qce/dma.c -+++ b/drivers/crypto/qce/dma.c -@@ -48,9 +48,10 @@ void qce_dma_release(struct qce_dma_data - - struct scatterlist * - qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl, -- int max_ents) -+ unsigned int max_len) - { - struct scatterlist *sg = sgt->sgl, *sg_last = NULL; -+ unsigned int new_len; - - while (sg) { - if (!sg_page(sg)) -@@ -61,13 +62,13 @@ qce_sgtable_add(struct sg_table *sgt, st - if (!sg) - return ERR_PTR(-EINVAL); - -- while (new_sgl && sg && max_ents) { -- sg_set_page(sg, sg_page(new_sgl), new_sgl->length, -- new_sgl->offset); -+ while (new_sgl && sg && max_len) { -+ new_len = new_sgl->length > max_len ? max_len : new_sgl->length; -+ sg_set_page(sg, sg_page(new_sgl), new_len, new_sgl->offset); - sg_last = sg; - sg = sg_next(sg); - new_sgl = sg_next(new_sgl); -- max_ents--; -+ max_len -= new_len; - } - - return sg_last; ---- a/drivers/crypto/qce/dma.h -+++ b/drivers/crypto/qce/dma.h -@@ -43,6 +43,6 @@ void qce_dma_issue_pending(struct qce_dm - int qce_dma_terminate_all(struct qce_dma_data *dma); - struct scatterlist * - qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add, -- int max_ents); -+ unsigned int max_len); - - #endif /* _DMA_H_ */ ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -97,13 +97,14 @@ qce_skcipher_async_req_handle(struct cry - - sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ); - -- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1); -+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, req->cryptlen); - if (IS_ERR(sg)) { - ret = PTR_ERR(sg); - goto error_free; - } - -- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1); -+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, -+ QCE_RESULT_BUF_SZ); - if (IS_ERR(sg)) { - ret = PTR_ERR(sg); - goto error_free; diff --git a/target/linux/ipq40xx/patches-5.4/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch b/target/linux/ipq40xx/patches-5.4/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch deleted file mode 100644 index 0b5c8c6d66..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch +++ /dev/null @@ -1,113 +0,0 @@ -From ce163ba0bf298f1707321ac025ef639f88e62801 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 7 Feb 2020 12:02:26 -0300 -Subject: [PATCH 10/11] crypto: qce - use AES fallback for small requests - -Process small blocks using the fallback cipher, as a workaround for an -observed failure (DMA-related, apparently) when computing the GCM ghash -key. This brings a speed gain as well, since it avoids the latency of -using the hardware engine to process small blocks. - -Using software for all 16-byte requests would be enough to make GCM -work, but to increase performance, a larger threshold would be better. -Measuring the performance of supported ciphers with openssl speed, -software matches hardware at around 768-1024 bytes. - -Considering the 256-bit ciphers, software is 2-3 times faster than qce -at 256-bytes, 30% faster at 512, and about even at 768-bytes. With -128-bit keys, the break-even point would be around 1024-bytes. - -This adds the 'aes_sw_max_len' parameter, to set the largest request -length processed by the software fallback. Its default is being set to -512 bytes, a little lower than the break-even point, to balance the cost -in CPU usage. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - ---- a/drivers/crypto/Kconfig -+++ b/drivers/crypto/Kconfig -@@ -684,6 +684,29 @@ choice - - endchoice - -+config CRYPTO_DEV_QCE_SW_MAX_LEN -+ int "Default maximum request size to use software for AES" -+ depends on CRYPTO_DEV_QCE && CRYPTO_DEV_QCE_SKCIPHER -+ default 512 -+ help -+ This sets the default maximum request size to perform AES requests -+ using software instead of the crypto engine. It can be changed by -+ setting the aes_sw_max_len parameter. -+ -+ Small blocks are processed faster in software than hardware. -+ Considering the 256-bit ciphers, software is 2-3 times faster than -+ qce at 256-bytes, 30% faster at 512, and about even at 768-bytes. -+ With 128-bit keys, the break-even point would be around 1024-bytes. -+ -+ The default is set a little lower, to 512 bytes, to balance the -+ cost in CPU usage. The minimum recommended setting is 16-bytes -+ (1 AES block), since AES-GCM will fail if you set it lower. -+ Setting this to zero will send all requests to the hardware. -+ -+ Note that 192-bit keys are not supported by the hardware and are -+ always processed by the software fallback, and all DES requests -+ are done by the hardware. -+ - config CRYPTO_DEV_QCOM_RNG - tristate "Qualcomm Random Number Generator Driver" - depends on ARCH_QCOM || COMPILE_TEST ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -5,6 +5,7 @@ - - #include - #include -+#include - #include - #include - #include -@@ -12,6 +13,13 @@ - - #include "cipher.h" - -+static unsigned int aes_sw_max_len = CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN; -+module_param(aes_sw_max_len, uint, 0644); -+MODULE_PARM_DESC(aes_sw_max_len, -+ "Only use hardware for AES requests larger than this " -+ "[0=always use hardware; anything <16 breaks AES-GCM; default=" -+ __stringify(CONFIG_CRYPTO_DEV_QCE_SOFT_THRESHOLD)"]"); -+ - static LIST_HEAD(skcipher_algs); - - static void qce_skcipher_done(void *data) -@@ -166,15 +174,10 @@ static int qce_skcipher_setkey(struct cr - switch (IS_XTS(flags) ? keylen >> 1 : keylen) { - case AES_KEYSIZE_128: - case AES_KEYSIZE_256: -+ memcpy(ctx->enc_key, key, keylen); - break; -- default: -- goto fallback; - } - -- ctx->enc_keylen = keylen; -- memcpy(ctx->enc_key, key, keylen); -- return 0; --fallback: - ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen); - if (!ret) - ctx->enc_keylen = keylen; -@@ -224,8 +227,9 @@ static int qce_skcipher_crypt(struct skc - rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; - keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; - -- if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 && -- keylen != AES_KEYSIZE_256) { -+ if (IS_AES(rctx->flags) && -+ ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || -+ req->cryptlen <= aes_sw_max_len)) { - SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); - - skcipher_request_set_sync_tfm(subreq, ctx->fallback); diff --git a/target/linux/ipq40xx/patches-5.4/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch b/target/linux/ipq40xx/patches-5.4/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch deleted file mode 100644 index 18beda6296..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 7f19380b2cfd412dcef2facefb3f6c62788864d7 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Fri, 7 Feb 2020 12:02:27 -0300 -Subject: [PATCH 11/11] crypto: qce - handle AES-XTS cases that qce fails - -QCE hangs when presented with an AES-XTS request whose length is larger -than QCE_SECTOR_SIZE (512-bytes), and is not a multiple of it. Let the -fallback cipher handle them. - -Signed-off-by: Eneas U de Queiroz -Signed-off-by: Herbert Xu ---- - drivers/crypto/qce/common.c | 2 -- - drivers/crypto/qce/common.h | 3 +++ - drivers/crypto/qce/skcipher.c | 9 +++++++-- - 3 files changed, 10 insertions(+), 4 deletions(-) - ---- a/drivers/crypto/qce/common.c -+++ b/drivers/crypto/qce/common.c -@@ -15,8 +15,6 @@ - #include "regs-v5.h" - #include "sha.h" - --#define QCE_SECTOR_SIZE 512 -- - static inline u32 qce_read(struct qce_device *qce, u32 offset) - { - return readl(qce->base + offset); ---- a/drivers/crypto/qce/common.h -+++ b/drivers/crypto/qce/common.h -@@ -12,6 +12,9 @@ - #include - #include - -+/* xts du size */ -+#define QCE_SECTOR_SIZE 512 -+ - /* key size in bytes */ - #define QCE_SHA_HMAC_KEY_SIZE 64 - #define QCE_MAX_CIPHER_KEY_SIZE AES_KEYSIZE_256 ---- a/drivers/crypto/qce/skcipher.c -+++ b/drivers/crypto/qce/skcipher.c -@@ -227,9 +227,14 @@ static int qce_skcipher_crypt(struct skc - rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT; - keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen; - -+ /* qce is hanging when AES-XTS request len > QCE_SECTOR_SIZE and -+ * is not a multiple of it; pass such requests to the fallback -+ */ - if (IS_AES(rctx->flags) && -- ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || -- req->cryptlen <= aes_sw_max_len)) { -+ (((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) || -+ req->cryptlen <= aes_sw_max_len) || -+ (IS_XTS(rctx->flags) && req->cryptlen > QCE_SECTOR_SIZE && -+ req->cryptlen % QCE_SECTOR_SIZE))) { - SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback); - - skcipher_request_set_sync_tfm(subreq, ctx->fallback); diff --git a/target/linux/ipq40xx/patches-5.4/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch b/target/linux/ipq40xx/patches-5.4/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch deleted file mode 100644 index ad09a9f250..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch +++ /dev/null @@ -1,197 +0,0 @@ -From 3c9d8f6c03a2cda1849ec3c84f82ec030d1f49ef Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sun, 3 May 2020 22:18:22 +0200 -Subject: [PATCH] phy: add driver for Qualcomm IPQ40xx USB PHY - -Add a driver to setup the USB PHY-s on Qualcom m IPQ40xx series SoCs. -The driver sets up HS and SS phys. - -Signed-off-by: John Crispin -Signed-off-by: Robert Marko -Cc: Luka Perkov -Link: https://lore.kernel.org/r/20200503201823.531757-1-robert.marko@sartura.hr -Signed-off-by: Vinod Koul ---- - drivers/phy/qualcomm/Kconfig | 7 + - drivers/phy/qualcomm/Makefile | 1 + - drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 148 ++++++++++++++++++++ - 3 files changed, 156 insertions(+) - create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c - ---- a/drivers/phy/qualcomm/Kconfig -+++ b/drivers/phy/qualcomm/Kconfig -@@ -18,6 +18,13 @@ config PHY_QCOM_APQ8064_SATA - depends on OF - select GENERIC_PHY - -+config PHY_QCOM_IPQ4019_USB -+ tristate "Qualcomm IPQ4019 USB PHY driver" -+ depends on OF && (ARCH_QCOM || COMPILE_TEST) -+ select GENERIC_PHY -+ help -+ Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. -+ - config PHY_QCOM_IPQ806X_SATA - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" - depends on ARCH_QCOM ---- a/drivers/phy/qualcomm/Makefile -+++ b/drivers/phy/qualcomm/Makefile -@@ -1,6 +1,7 @@ - # SPDX-License-Identifier: GPL-2.0 - obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o - obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o -+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o - obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o - obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o - obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o ---- /dev/null -+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c -@@ -0,0 +1,148 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later -+/* -+ * Copyright (C) 2018 John Crispin -+ * -+ * Based on code from -+ * Allwinner Technology Co., Ltd. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+struct ipq4019_usb_phy { -+ struct device *dev; -+ struct phy *phy; -+ void __iomem *base; -+ struct reset_control *por_rst; -+ struct reset_control *srif_rst; -+}; -+ -+static int ipq4019_ss_phy_power_off(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ reset_control_assert(phy->por_rst); -+ msleep(10); -+ -+ return 0; -+} -+ -+static int ipq4019_ss_phy_power_on(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ ipq4019_ss_phy_power_off(_phy); -+ -+ reset_control_deassert(phy->por_rst); -+ -+ return 0; -+} -+ -+static struct phy_ops ipq4019_usb_ss_phy_ops = { -+ .power_on = ipq4019_ss_phy_power_on, -+ .power_off = ipq4019_ss_phy_power_off, -+}; -+ -+static int ipq4019_hs_phy_power_off(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ reset_control_assert(phy->por_rst); -+ msleep(10); -+ -+ reset_control_assert(phy->srif_rst); -+ msleep(10); -+ -+ return 0; -+} -+ -+static int ipq4019_hs_phy_power_on(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ ipq4019_hs_phy_power_off(_phy); -+ -+ reset_control_deassert(phy->srif_rst); -+ msleep(10); -+ -+ reset_control_deassert(phy->por_rst); -+ -+ return 0; -+} -+ -+static struct phy_ops ipq4019_usb_hs_phy_ops = { -+ .power_on = ipq4019_hs_phy_power_on, -+ .power_off = ipq4019_hs_phy_power_off, -+}; -+ -+static const struct of_device_id ipq4019_usb_phy_of_match[] = { -+ { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops}, -+ { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops}, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match); -+ -+static int ipq4019_usb_phy_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct resource *res; -+ struct phy_provider *phy_provider; -+ struct ipq4019_usb_phy *phy; -+ -+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); -+ if (!phy) -+ return -ENOMEM; -+ -+ phy->dev = &pdev->dev; -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ phy->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(phy->base)) { -+ dev_err(dev, "failed to remap register memory\n"); -+ return PTR_ERR(phy->base); -+ } -+ -+ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst"); -+ if (IS_ERR(phy->por_rst)) { -+ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER) -+ dev_err(dev, "POR reset is missing\n"); -+ return PTR_ERR(phy->por_rst); -+ } -+ -+ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst"); -+ if (IS_ERR(phy->srif_rst)) -+ return PTR_ERR(phy->srif_rst); -+ -+ phy->phy = devm_phy_create(dev, NULL, of_device_get_match_data(dev)); -+ if (IS_ERR(phy->phy)) { -+ dev_err(dev, "failed to create PHY\n"); -+ return PTR_ERR(phy->phy); -+ } -+ phy_set_drvdata(phy->phy, phy); -+ -+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); -+ -+ return PTR_ERR_OR_ZERO(phy_provider); -+} -+ -+static struct platform_driver ipq4019_usb_phy_driver = { -+ .probe = ipq4019_usb_phy_probe, -+ .driver = { -+ .of_match_table = ipq4019_usb_phy_of_match, -+ .name = "ipq4019-usb-phy", -+ } -+}; -+module_platform_driver(ipq4019_usb_phy_driver); -+ -+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver"); -+MODULE_AUTHOR("John Crispin "); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq40xx/patches-5.4/0018-v5.9-pinctrl-msm-open-drain.patch b/target/linux/ipq40xx/patches-5.4/0018-v5.9-pinctrl-msm-open-drain.patch deleted file mode 100644 index 5cd4ccc30f..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0018-v5.9-pinctrl-msm-open-drain.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 5b08c1d567ee8e6af94696b3e549997cbdb2bb80 Mon Sep 17 00:00:00 2001 -From: Jaiganesh Narayanan -Date: Thu, 1 Sep 2016 10:40:38 +0530 -Subject: [PATCH] pinctrl: qcom: ipq4019: add open drain support - -Signed-off-by: Jaiganesh Narayanan -[ Brian: adapted from from the Chromium OS kernel used on IPQ4019-based - WiFi APs. ] -Signed-off-by: Brian Norris ---- -https://lore.kernel.org/linux-gpio/20200703080646.23233-1-computersforpeace@gmail.com/ - - drivers/pinctrl/qcom/pinctrl-ipq4019.c | 1 + - drivers/pinctrl/qcom/pinctrl-msm.c | 13 +++++++++++++ - drivers/pinctrl/qcom/pinctrl-msm.h | 2 ++ - 3 files changed, 16 insertions(+) - ---- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c -+++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c -@@ -254,6 +254,7 @@ DECLARE_QCA_GPIO_PINS(99); - .mux_bit = 2, \ - .pull_bit = 0, \ - .drv_bit = 6, \ -+ .od_bit = 12, \ - .oe_bit = 9, \ - .in_bit = 0, \ - .out_bit = 1, \ ---- a/drivers/pinctrl/qcom/pinctrl-msm.c -+++ b/drivers/pinctrl/qcom/pinctrl-msm.c -@@ -225,6 +225,10 @@ static int msm_config_reg(struct msm_pin - *bit = g->pull_bit; - *mask = 3; - break; -+ case PIN_CONFIG_DRIVE_OPEN_DRAIN: -+ *bit = g->od_bit; -+ *mask = 1; -+ break; - case PIN_CONFIG_DRIVE_STRENGTH: - *bit = g->drv_bit; - *mask = 7; -@@ -302,6 +306,12 @@ static int msm_config_group_get(struct p - if (!arg) - return -EINVAL; - break; -+ case PIN_CONFIG_DRIVE_OPEN_DRAIN: -+ /* Pin is not open-drain */ -+ if (!arg) -+ return -EINVAL; -+ arg = 1; -+ break; - case PIN_CONFIG_DRIVE_STRENGTH: - arg = msm_regval_to_drive(arg); - break; -@@ -374,6 +384,9 @@ static int msm_config_group_set(struct p - else - arg = MSM_PULL_UP; - break; -+ case PIN_CONFIG_DRIVE_OPEN_DRAIN: -+ arg = 1; -+ break; - case PIN_CONFIG_DRIVE_STRENGTH: - /* Check for invalid values */ - if (arg > 16 || arg < 2 || (arg % 2) != 0) ---- a/drivers/pinctrl/qcom/pinctrl-msm.h -+++ b/drivers/pinctrl/qcom/pinctrl-msm.h -@@ -38,6 +38,7 @@ struct msm_function { - * @mux_bit: Offset in @ctl_reg for the pinmux function selection. - * @pull_bit: Offset in @ctl_reg for the bias configuration. - * @drv_bit: Offset in @ctl_reg for the drive strength configuration. -+ * @od_bit: Offset in @ctl_reg for controlling open drain. - * @oe_bit: Offset in @ctl_reg for controlling output enable. - * @in_bit: Offset in @io_reg for the input bit value. - * @out_bit: Offset in @io_reg for the output bit value. -@@ -75,6 +76,7 @@ struct msm_pingroup { - unsigned pull_bit:5; - unsigned drv_bit:5; - -+ unsigned od_bit:5; - unsigned oe_bit:5; - unsigned in_bit:5; - unsigned out_bit:5; diff --git a/target/linux/ipq40xx/patches-5.4/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch b/target/linux/ipq40xx/patches-5.4/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch deleted file mode 100644 index 7202478610..0000000000 --- a/target/linux/ipq40xx/patches-5.4/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 707745e8d4e75b638b990d67950ab292b3b8ea2a Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Mon, 16 Dec 2019 01:36:46 +0100 -Subject: [PATCH] mtd: spi-nor: Add support for mx25r3235f - -Add MTD support for the Macronix MX25R3235F SPI NOR chip from Macronix. -The chip has 4MB of total capacity, divided into a total of 64 sectors, -each 64KB sized. The chip also supports 4KB large sectors. -Additionally, it supports dual and quad read modes. - -Functionality was verified on an HPE/Aruba AP-303 board. - -Signed-off-by: David Bauer -Signed-off-by: Tudor Ambarus ---- - drivers/mtd/spi-nor/spi-nor.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -2354,6 +2354,8 @@ static const struct flash_info spi_nor_i - { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) }, - { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, - { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, -+ { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64, -+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256, - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, - { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, diff --git a/target/linux/ipq40xx/patches-5.4/100-GPIO-add-named-gpio-exports.patch b/target/linux/ipq40xx/patches-5.4/100-GPIO-add-named-gpio-exports.patch deleted file mode 100644 index 805836fcca..0000000000 --- a/target/linux/ipq40xx/patches-5.4/100-GPIO-add-named-gpio-exports.patch +++ /dev/null @@ -1,165 +0,0 @@ -From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Tue, 12 Aug 2014 20:49:27 +0200 -Subject: [PATCH 24/53] GPIO: add named gpio exports - -Signed-off-by: John Crispin ---- - drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++ - drivers/gpio/gpiolib-sysfs.c | 10 +++++- - include/asm-generic/gpio.h | 6 ++++ - include/linux/gpio/consumer.h | 8 +++++ - 4 files changed, 91 insertions(+), 1 deletion(-) - ---- a/drivers/gpio/gpiolib-of.c -+++ b/drivers/gpio/gpiolib-of.c -@@ -19,6 +19,8 @@ - #include - #include - #include -+#include -+#include - - #include "gpiolib.h" - #include "gpiolib-of.h" -@@ -915,3 +917,68 @@ void of_gpiochip_remove(struct gpio_chip - { - of_node_put(chip->of_node); - } -+ -+static struct of_device_id gpio_export_ids[] = { -+ { .compatible = "gpio-export" }, -+ { /* sentinel */ } -+}; -+ -+static int of_gpio_export_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct device_node *cnp; -+ u32 val; -+ int nb = 0; -+ -+ for_each_child_of_node(np, cnp) { -+ const char *name = NULL; -+ int gpio; -+ bool dmc; -+ int max_gpio = 1; -+ int i; -+ -+ of_property_read_string(cnp, "gpio-export,name", &name); -+ -+ if (!name) -+ max_gpio = of_gpio_count(cnp); -+ -+ for (i = 0; i < max_gpio; i++) { -+ unsigned flags = 0; -+ enum of_gpio_flags of_flags; -+ -+ gpio = of_get_gpio_flags(cnp, i, &of_flags); -+ if (!gpio_is_valid(gpio)) -+ return gpio; -+ -+ if (of_flags == OF_GPIO_ACTIVE_LOW) -+ flags |= GPIOF_ACTIVE_LOW; -+ -+ if (!of_property_read_u32(cnp, "gpio-export,output", &val)) -+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; -+ else -+ flags |= GPIOF_IN; -+ -+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np))) -+ continue; -+ -+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change"); -+ gpio_export_with_name(gpio, dmc, name); -+ nb++; -+ } -+ } -+ -+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb); -+ -+ return 0; -+} -+ -+static struct platform_driver gpio_export_driver = { -+ .driver = { -+ .name = "gpio-export", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(gpio_export_ids), -+ }, -+ .probe = of_gpio_export_probe, -+}; -+ -+module_platform_driver(gpio_export_driver); ---- a/drivers/gpio/gpiolib-sysfs.c -+++ b/drivers/gpio/gpiolib-sysfs.c -@@ -571,7 +571,7 @@ static struct class gpio_class = { - * - * Returns zero on success, else an error. - */ --int gpiod_export(struct gpio_desc *desc, bool direction_may_change) -+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name) - { - struct gpio_chip *chip; - struct gpio_device *gdev; -@@ -633,6 +633,8 @@ int gpiod_export(struct gpio_desc *desc, - offset = gpio_chip_hwgpio(desc); - if (chip->names && chip->names[offset]) - ioname = chip->names[offset]; -+ if (name) -+ ioname = name; - - dev = device_create_with_groups(&gpio_class, &gdev->dev, - MKDEV(0, 0), data, gpio_groups, -@@ -654,6 +656,12 @@ err_unlock: - gpiod_dbg(desc, "%s: status %d\n", __func__, status); - return status; - } -+EXPORT_SYMBOL_GPL(__gpiod_export); -+ -+int gpiod_export(struct gpio_desc *desc, bool direction_may_change) -+{ -+ return __gpiod_export(desc, direction_may_change, NULL); -+} - EXPORT_SYMBOL_GPL(gpiod_export); - - static int match_export(struct device *dev, const void *desc) ---- a/include/asm-generic/gpio.h -+++ b/include/asm-generic/gpio.h -@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g - return gpiod_export(gpio_to_desc(gpio), direction_may_change); - } - -+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); -+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name) -+{ -+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name); -+} -+ - static inline int gpio_export_link(struct device *dev, const char *name, - unsigned gpio) - { ---- a/include/linux/gpio/consumer.h -+++ b/include/linux/gpio/consumer.h -@@ -668,6 +668,7 @@ static inline void devm_acpi_dev_remove_ - - #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) - -+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); - int gpiod_export(struct gpio_desc *desc, bool direction_may_change); - int gpiod_export_link(struct device *dev, const char *name, - struct gpio_desc *desc); -@@ -675,6 +676,13 @@ void gpiod_unexport(struct gpio_desc *de - - #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ - -+static inline int _gpiod_export(struct gpio_desc *desc, -+ bool direction_may_change, -+ const char *name) -+{ -+ return -ENOSYS; -+} -+ - static inline int gpiod_export(struct gpio_desc *desc, - bool direction_may_change) - { diff --git a/target/linux/ipq40xx/patches-5.4/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch b/target/linux/ipq40xx/patches-5.4/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch deleted file mode 100644 index 14affc28c1..0000000000 --- a/target/linux/ipq40xx/patches-5.4/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 77d9b11ae7269dcf376c3b9493209f712524e986 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 22 Jan 2020 12:56:35 +0100 -Subject: [PATCH] arm: dts: IPQ4019: add SDHCI VQMMC LDO node - -Since we now have driver for the SDHCI VQMMC LDO needed -for I/0 voltage levels lets introduce the necessary node for it. - -Signed-off-by: Robert Marko ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -209,6 +209,16 @@ - interrupts = ; - }; - -+ vqmmc: regulator@1948000 { -+ compatible = "qcom,vqmmc-ipq4019-regulator"; -+ reg = <0x01948000 0x4>; -+ regulator-name = "vqmmc"; -+ regulator-min-microvolt = <1500000>; -+ regulator-max-microvolt = <3000000>; -+ regulator-always-on; -+ status = "disabled"; -+ }; -+ - sdhci: sdhci@7824900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0x7824900 0x11c>, <0x7824000 0x800>; diff --git a/target/linux/ipq40xx/patches-5.4/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-5.4/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch deleted file mode 100644 index b033a1baee..0000000000 --- a/target/linux/ipq40xx/patches-5.4/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch +++ /dev/null @@ -1,97 +0,0 @@ -From 193856b5fe11c50a0b6ff22457dd674c1a45fec6 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Wed, 9 Sep 2020 18:31:03 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: add USB devicetree nodes - -Since we now have driver for the USB PHY, and USB controller is already supported by the DWC3 driver lets add the necessary nodes to DTSI. - -Signed-off-by: John Crispin -Signed-off-by: Robert Marko -Cc: Luka Perkov -Reviewed-by: Vinod Koul ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++++ - 1 file changed, 74 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -615,5 +615,79 @@ - reg = <4>; - }; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ compatible = "qcom,usb-ss-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0x9a000 0x800>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_UNIPHY_PHY_ARES>; -+ reset-names = "por_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa6000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3: usb3@8af8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x8af8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB3_MASTER_CLK>, -+ <&gcc GCC_USB3_SLEEP_CLK>, -+ <&gcc GCC_USB3_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@8a00000 { -+ compatible = "snps,dwc3"; -+ reg = <0x8a00000 0xf8000>; -+ interrupts = ; -+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>; -+ phy-names = "usb2-phy", "usb3-phy"; -+ dr_mode = "host"; -+ }; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa8000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb2: usb2@60f8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x60f8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB2_MASTER_CLK>, -+ <&gcc GCC_USB2_SLEEP_CLK>, -+ <&gcc GCC_USB2_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@6000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x6000000 0xf8000>; -+ interrupts = ; -+ phys = <&usb2_hs_phy>; -+ phy-names = "usb2-phy"; -+ dr_mode = "host"; -+ }; -+ }; - }; - }; diff --git a/target/linux/ipq40xx/patches-5.4/103-arm-dts-qcom-ipq4019-add-more-labels.patch b/target/linux/ipq40xx/patches-5.4/103-arm-dts-qcom-ipq4019-add-more-labels.patch deleted file mode 100644 index 0e215ee7cf..0000000000 --- a/target/linux/ipq40xx/patches-5.4/103-arm-dts-qcom-ipq4019-add-more-labels.patch +++ /dev/null @@ -1,42 +0,0 @@ -From caa3ee6b094ee18021943504c938919fcac325ec Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 9 Sep 2020 20:40:33 +0200 -Subject: [PATCH] arm: dts: qcom: ipq4019: add more labels - -Lets add labels to more commonly used nodes for easier modification in board DTS files. - -Signed-off-by: Robert Marko -Cc: Luka Perkov ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -190,7 +190,7 @@ - reg = <0x1800000 0x60000>; - }; - -- rng@22000 { -+ prng: rng@22000 { - compatible = "qcom,prng"; - reg = <0x22000 0x140>; - clocks = <&gcc GCC_PRNG_AHB_CLK>; -@@ -310,7 +310,7 @@ - status = "disabled"; - }; - -- crypto@8e3a000 { -+ crypto: crypto@8e3a000 { - compatible = "qcom,crypto-v5.1"; - reg = <0x08e3a000 0x6000>; - clocks = <&gcc GCC_CRYPTO_AHB_CLK>, -@@ -396,7 +396,7 @@ - dma-names = "rx", "tx"; - }; - -- watchdog@b017000 { -+ watchdog: watchdog@b017000 { - compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019"; - reg = <0xb017000 0x40>; - clocks = <&sleep_clk>; diff --git a/target/linux/ipq40xx/patches-5.4/104-clk-fix-apss-cpu-overclocking.patch b/target/linux/ipq40xx/patches-5.4/104-clk-fix-apss-cpu-overclocking.patch deleted file mode 100644 index 25a2020bd2..0000000000 --- a/target/linux/ipq40xx/patches-5.4/104-clk-fix-apss-cpu-overclocking.patch +++ /dev/null @@ -1,115 +0,0 @@ -From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 11 Mar 2018 14:41:31 +0100 -Subject: [PATCH 2/2] clk: fix apss cpu overclocking - -There's an interaction issue between the clk changes:" -clk: qcom: ipq4019: Add the apss cpu pll divider clock node -clk: qcom: ipq4019: remove fixed clocks and add pll clocks -" and the cpufreq-dt. - -cpufreq-dt is now spamming the kernel-log with the following: - -[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP -for freq 761142857 (-34) - -This only happens on certain devices like the Compex WPJ428 -and AVM FritzBox!4040. However, other devices like the Asus -RT-AC58U and Meraki MR33 work just fine. - -The issue stem from the fact that all higher CPU-Clocks -are achieved by switching the clock-parent to the P_DDRPLLAPSS -(ddrpllapss). Which is set by Qualcomm's proprietary bootcode -as part of the DDR calibration. - -For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked -at round 533 MHz (ddrpllsdcc = 190285714 Hz). - -whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is -clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz). - -This patch attempts to fix the issue by modifying -clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate() -to use a new qcom_find_freq_close() function, which returns the closest -matching frequency, instead of the next higher. This way, the SoC in -the FB4040 (with its max clock speed of 710.4 MHz) will no longer -try to overclock to 761 MHz. - -Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node") -Signed-off-by: Christian Lamparter -Signed-off-by: John Crispin ---- - drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++--- - 1 file changed, 31 insertions(+), 3 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq4019.c -+++ b/drivers/clk/qcom/gcc-ipq4019.c -@@ -1243,6 +1243,29 @@ static const struct clk_fepll_vco gcc_fe - .reg = 0x2f020, - }; - -+ -+const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f, -+ unsigned long rate) -+{ -+ const struct freq_tbl *last = NULL; -+ -+ for ( ; f->freq; f++) { -+ if (rate == f->freq) -+ return f; -+ -+ if (f->freq > rate) { -+ if (!last || -+ (f->freq - rate) < (rate - last->freq)) -+ return f; -+ else -+ return last; -+ } -+ last = f; -+ } -+ -+ return last; -+} -+ - /* - * Round rate function for APSS CPU PLL Clock divider. - * It looks up the frequency table and returns the next higher frequency -@@ -1255,7 +1278,7 @@ static long clk_cpu_div_round_rate(struc - struct clk_hw *p_hw; - const struct freq_tbl *f; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1278,7 +1301,7 @@ static int clk_cpu_div_set_rate(struct c - u32 mask; - int ret; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1305,6 +1328,7 @@ static unsigned long - clk_cpu_div_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) - { -+ const struct freq_tbl *f; - struct clk_fepll *pll = to_clk_fepll(hw); - u32 cdiv, pre_div; - u64 rate; -@@ -1325,7 +1349,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h - rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2; - do_div(rate, pre_div); - -- return rate; -+ f = qcom_find_freq_close(pll->freq_tbl, rate); -+ if (!f) -+ return rate; -+ -+ return f->freq; - }; - - static const struct clk_ops clk_regmap_cpu_div_ops = { diff --git a/target/linux/ipq40xx/patches-5.4/105-ipq40xx-fix-sleep-clock.patch b/target/linux/ipq40xx/patches-5.4/105-ipq40xx-fix-sleep-clock.patch deleted file mode 100644 index 8afcbdcf98..0000000000 --- a/target/linux/ipq40xx/patches-5.4/105-ipq40xx-fix-sleep-clock.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 4d44bb1031a68d7d5b604d3b340c059f41ca62af Mon Sep 17 00:00:00 2001 -From: dissent1 -Date: Mon, 6 May 2019 20:55:16 +0300 -Subject: [PATCH] ipq40xx: fix sleep clock - -It seems like sleep_clk was copied from ipq806x. -Fix ipq40xx sleep_clk to the value QSDK defines. - -Also rename the sleep clock node like the GCC driver names it. - -Signed-off-by: Pavel Kubelun ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -140,9 +140,9 @@ - }; - - clocks { -- sleep_clk: sleep_clk { -+ sleep_clk: gcc_sleep_clk_src { - compatible = "fixed-clock"; -- clock-frequency = <32768>; -+ clock-frequency = <32000>; - #clock-cells = <0>; - }; - diff --git a/target/linux/ipq40xx/patches-5.4/300-clk-qcom-ipq4019-add-ess-reset.patch b/target/linux/ipq40xx/patches-5.4/300-clk-qcom-ipq4019-add-ess-reset.patch deleted file mode 100644 index 4297f32e05..0000000000 --- a/target/linux/ipq40xx/patches-5.4/300-clk-qcom-ipq4019-add-ess-reset.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 480c1f7648fc586db12d6003c717c23667a4fcf0 Mon Sep 17 00:00:00 2001 -From: Ram Chandra Jangir -Date: Tue, 28 Mar 2017 22:35:33 +0530 -Subject: [PATCH] clk: qcom: ipq4019: add ess reset - -Added the ESS reset in IPQ4019 GCC. - -Signed-off-by: Ram Chandra Jangir ---- - drivers/clk/qcom/gcc-ipq4019.c | 11 +++++++++++ - include/dt-bindings/clock/qcom,gcc-ipq4019.h | 11 +++++++++++ - 2 files changed, 22 insertions(+) - ---- a/drivers/clk/qcom/gcc-ipq4019.c -+++ b/drivers/clk/qcom/gcc-ipq4019.c -@@ -1736,6 +1736,17 @@ static const struct qcom_reset_map gcc_i - [GCC_TCSR_BCR] = {0x22000, 0}, - [GCC_MPM_BCR] = {0x24000, 0}, - [GCC_SPDM_BCR] = {0x25000, 0}, -+ [ESS_MAC1_ARES] = {0x1200C, 0}, -+ [ESS_MAC2_ARES] = {0x1200C, 1}, -+ [ESS_MAC3_ARES] = {0x1200C, 2}, -+ [ESS_MAC4_ARES] = {0x1200C, 3}, -+ [ESS_MAC5_ARES] = {0x1200C, 4}, -+ [ESS_PSGMII_ARES] = {0x1200C, 5}, -+ [ESS_MAC1_CLK_DIS] = {0x1200C, 8}, -+ [ESS_MAC2_CLK_DIS] = {0x1200C, 9}, -+ [ESS_MAC3_CLK_DIS] = {0x1200C, 10}, -+ [ESS_MAC4_CLK_DIS] = {0x1200C, 11}, -+ [ESS_MAC5_CLK_DIS] = {0x1200C, 12}, - }; - - static const struct regmap_config gcc_ipq4019_regmap_config = { ---- a/include/dt-bindings/clock/qcom,gcc-ipq4019.h -+++ b/include/dt-bindings/clock/qcom,gcc-ipq4019.h -@@ -165,5 +165,16 @@ - #define GCC_QDSS_BCR 69 - #define GCC_MPM_BCR 70 - #define GCC_SPDM_BCR 71 -+#define ESS_MAC1_ARES 72 -+#define ESS_MAC2_ARES 73 -+#define ESS_MAC3_ARES 74 -+#define ESS_MAC4_ARES 75 -+#define ESS_MAC5_ARES 76 -+#define ESS_PSGMII_ARES 77 -+#define ESS_MAC1_CLK_DIS 78 -+#define ESS_MAC2_CLK_DIS 79 -+#define ESS_MAC3_CLK_DIS 80 -+#define ESS_MAC4_CLK_DIS 81 -+#define ESS_MAC5_CLK_DIS 82 - - #endif diff --git a/target/linux/ipq40xx/patches-5.4/301-arm-compressed-add-appended-DTB-section.patch b/target/linux/ipq40xx/patches-5.4/301-arm-compressed-add-appended-DTB-section.patch deleted file mode 100644 index 7e6184fc73..0000000000 --- a/target/linux/ipq40xx/patches-5.4/301-arm-compressed-add-appended-DTB-section.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 0843a61d6913bdac8889eb048ed89f7903059787 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 30 Oct 2020 13:36:31 +0100 -Subject: [PATCH] arm: compressed: add appended DTB section - -This adds a appended_dtb section to the ARM decompressor -linker script. - -This allows using the existing ARM zImage appended DTB support for -appending a DTB to the raw ELF kernel. - -Its size is set to 1MB max to match the zImage appended DTB size limit. - -To use it to pass the DTB to the kernel, objcopy is used: - -objcopy --set-section-flags=.appended_dtb=alloc,contents \ - --update-section=.appended_dtb=.dtb vmlinux - -This is based off the following patch: -https://github.com/openwrt/openwrt/commit/c063e27e02a9dcac0e7f5877fb154e58fa3e1a69 - -Signed-off-by: Robert Marko ---- - arch/arm/boot/compressed/vmlinux.lds.S | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/compressed/vmlinux.lds.S -+++ b/arch/arm/boot/compressed/vmlinux.lds.S -@@ -93,6 +93,13 @@ SECTIONS - - _edata = .; - -+ .appended_dtb : { -+ /* leave space for appended DTB */ -+ . += 0x100000; -+ } -+ -+ _edata_dtb = .; -+ - /* - * The image_end section appears after any additional loadable sections - * that the linker may decide to insert in the binary image. Having -@@ -132,4 +139,4 @@ SECTIONS - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - } --ASSERT(_edata_real == _edata, "error: zImage file size is incorrect"); -+ASSERT(_edata_real == _edata_dtb, "error: zImage file size is incorrect"); diff --git a/target/linux/ipq40xx/patches-5.4/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch b/target/linux/ipq40xx/patches-5.4/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch deleted file mode 100644 index 71618a40f2..0000000000 --- a/target/linux/ipq40xx/patches-5.4/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 11d6a6128a5a07c429941afc202b6e62a19771be Mon Sep 17 00:00:00 2001 -From: John Thomson -Date: Fri, 23 Oct 2020 19:42:36 +1000 -Subject: [PATCH 2/2] arm: compressed: set ipq40xx watchdog to allow boot - -For IPQ40XX systems where the SoC watchdog is activated before linux, -the watchdog timer may be too small for linux to finish uncompress, -boot, and watchdog management start. -If the watchdog is enabled, set the timeout for it to 30 seconds. -The functionality and offsets were copied from: -drivers/watchdog/qcom-wdt.c qcom_wdt_set_timeout & qcom_wdt_start -The watchdog memory address was taken from: -arch/arm/boot/dts/qcom-ipq4019.dtsi - -This was required on Mikrotik IPQ40XX consumer hardware using Mikrotik's -RouterBoot bootloader. - -Signed-off-by: John Thomson ---- - arch/arm/boot/compressed/head.S | 35 +++++++++++++++++++++++++++++++++ - 1 file changed, 35 insertions(+) - ---- a/arch/arm/boot/compressed/head.S -+++ b/arch/arm/boot/compressed/head.S -@@ -599,6 +599,41 @@ not_relocated: mov r0, #0 - bic r4, r4, #1 - blne cache_on - -+/* Set the Qualcom IPQ40xx watchdog timeout to 30 seconds -+ * if it is enabled, so that there is time for kernel -+ * to decompress, boot, and take over the watchdog. -+ * data and functionality from drivers/watchdog/qcom-wdt.c -+ * address from arch/arm/boot/dts/qcom-ipq4019.dtsi -+ */ -+#ifdef CONFIG_ARCH_IPQ40XX -+watchdog_set: -+ /* offsets: -+ * 0x04 reset (=1 resets countdown) -+ * 0x08 enable (=0 disables) -+ * 0x0c status (=1 when SoC was reset by watchdog) -+ * 0x10 bark (=timeout warning in ticks) -+ * 0x14 bite (=timeout reset in ticks) -+ * clock rate is 1<<15 hertz -+ */ -+ .equ watchdog, 0x0b017000 @Store watchdog base address -+ movw r0, #:lower16:watchdog -+ movt r0, #:upper16:watchdog -+ ldr r1, [r0, #0x08] @Get enabled? -+ cmp r1, #1 @If not enabled, do not change -+ bne watchdog_finished -+ mov r1, #0 -+ str r1, [r0, #0x08] @Disable the watchdog -+ mov r1, #1 -+ str r1, [r0, #0x04] @Pet the watchdog -+ mov r1, #30 @30 seconds timeout -+ lsl r1, r1, #15 @converted to ticks -+ str r1, [r0, #0x10] @Set the bark timeout -+ str r1, [r0, #0x14] @Set the bite timeout -+ mov r1, #1 -+ str r1, [r0, #0x08] @Enable the watchdog -+watchdog_finished: -+#endif /* CONFIG_ARCH_IPQ40XX */ -+ - /* - * The C runtime environment should now be setup sufficiently. - * Set up some pointers, and start decompressing. diff --git a/target/linux/ipq40xx/patches-5.4/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch b/target/linux/ipq40xx/patches-5.4/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch deleted file mode 100644 index eaf7ae30bc..0000000000 --- a/target/linux/ipq40xx/patches-5.4/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 0e28623a11f3916c1fe5b7e789c7ab8ca932a929 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 22 Jan 2020 13:02:13 +0100 -Subject: [PATCH] mmc: sdhci: sdhci-msm: use sdhci_set_clock instead of - sdhci_msm_set_clock - -When using sdhci_msm_set_clock clock setting will fail, so lets -use the generic sdhci_set_clock. - -Signed-off-by: Robert Marko ---- - drivers/mmc/host/sdhci-msm.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mmc/host/sdhci-msm.c -+++ b/drivers/mmc/host/sdhci-msm.c -@@ -1763,7 +1763,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat - - static const struct sdhci_ops sdhci_msm_ops = { - .reset = sdhci_reset, -- .set_clock = sdhci_msm_set_clock, -+ .set_clock = sdhci_set_clock, - .get_min_clock = sdhci_msm_get_min_clock, - .get_max_clock = sdhci_msm_get_max_clock, - .set_bus_width = sdhci_set_bus_width, diff --git a/target/linux/ipq40xx/patches-5.4/702-dts-ipq4019-add-PHY-switch-nodes.patch b/target/linux/ipq40xx/patches-5.4/702-dts-ipq4019-add-PHY-switch-nodes.patch deleted file mode 100644 index cfbf7bd41f..0000000000 --- a/target/linux/ipq40xx/patches-5.4/702-dts-ipq4019-add-PHY-switch-nodes.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 9deeec35dd3b628b95624e41d4e04acf728991ba Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 20 Nov 2016 02:20:54 +0100 -Subject: [PATCH] dts: ipq4019: add PHY/switch nodes - -This patch adds both the "qcom,ess-switch" and "qcom,ess-psgmii" -nodes which are needed for the ar40xx.c driver to initialize the -switch. - -Signed-off-by: Christian Lamparter ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -616,6 +616,29 @@ - }; - }; - -+ ess-switch@c000000 { -+ compatible = "qcom,ess-switch"; -+ reg = <0xc000000 0x80000>; -+ switch_access_mode = "local bus"; -+ resets = <&gcc ESS_RESET>; -+ reset-names = "ess_rst"; -+ clocks = <&gcc GCC_ESS_CLK>; -+ clock-names = "ess_clk"; -+ switch_cpu_bmp = <0x1>; -+ switch_lan_bmp = <0x1e>; -+ switch_wan_bmp = <0x20>; -+ switch_mac_mode = <0>; /* PORT_WRAPPER_PSGMII */ -+ switch_initvlas = <0x7c 0x54>; -+ status = "disabled"; -+ }; -+ -+ ess-psgmii@98000 { -+ compatible = "qcom,ess-psgmii"; -+ reg = <0x98000 0x800>; -+ psgmii_access_mode = "local bus"; -+ status = "disabled"; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - compatible = "qcom,usb-ss-ipq4019-phy"; - #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-5.4/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch b/target/linux/ipq40xx/patches-5.4/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch deleted file mode 100644 index 1e22abdf51..0000000000 --- a/target/linux/ipq40xx/patches-5.4/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 7c129254adb1093d10a62ed7bf7b956fcc6ffe34 Mon Sep 17 00:00:00 2001 -From: Rakesh Nair -Date: Wed, 20 Jul 2016 15:02:01 +0530 -Subject: [PATCH] net: IPQ4019 needs rfs/vlan_tag callbacks in - netdev_ops - -Add callback support to get default vlan tag and register -receive flow steering filter. - -Used by IPQ4019 ess-edma driver. - -BUG=chrome-os-partner:33096 -TEST=none - -Change-Id: I266070e4a0fbe4a0d9966fe79a71e50ec4f26c75 -Signed-off-by: Rakesh Nair -Reviewed-on: https://chromium-review.googlesource.com/362203 -Commit-Ready: Grant Grundler -Tested-by: Grant Grundler -Reviewed-by: Grant Grundler ---- - include/linux/netdevice.h | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/include/linux/netdevice.h -+++ b/include/linux/netdevice.h -@@ -767,6 +767,16 @@ struct xps_map { - #define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \ - - sizeof(struct xps_map)) / sizeof(u16)) - -+#ifdef CONFIG_RFS_ACCEL -+typedef int (*set_rfs_filter_callback_t)(struct net_device *dev, -+ __be32 src, -+ __be32 dst, -+ __be16 sport, -+ __be16 dport, -+ u8 proto, -+ u16 rxq_index, -+ u32 action); -+#endif - /* - * This structure holds all XPS maps for device. Maps are indexed by CPU. - */ -@@ -1370,6 +1380,9 @@ struct net_device_ops { - const struct sk_buff *skb, - u16 rxq_index, - u32 flow_id); -+ int (*ndo_register_rfs_filter)(struct net_device *dev, -+ set_rfs_filter_callback_t set_filter); -+ int (*ndo_get_default_vlan_tag)(struct net_device *net); - #endif - int (*ndo_add_slave)(struct net_device *dev, - struct net_device *slave_dev, diff --git a/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch b/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch deleted file mode 100644 index 6315a81527..0000000000 --- a/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -580,6 +580,13 @@ config XILINX_GMII2RGMII - the Reduced Gigabit Media Independent Interface(RGMII) between - Ethernet physical media devices and the Gigabit Ethernet controller. - -+config AR40XX_PHY -+ tristate "Driver for Qualcomm Atheros IPQ40XX switches" -+ depends on HAS_IOMEM && OF && OF_MDIO -+ select SWCONFIG -+ help -+ This is the driver for Qualcomm Atheros IPQ40XX ESS switches. -+ - endif # PHYLIB - - config MICREL_KS8995MA ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -68,6 +68,7 @@ ifdef CONFIG_HWMON - aquantia-objs += aquantia_hwmon.o - endif - obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o -+obj-$(CONFIG_AR40XX_PHY) += ar40xx.o - obj-$(CONFIG_AX88796B_PHY) += ax88796b.o - obj-$(CONFIG_AT803X_PHY) += at803x.o - obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o diff --git a/target/linux/ipq40xx/patches-5.4/706-dt-bindings-net-add-QCA807x-PHY.patch b/target/linux/ipq40xx/patches-5.4/706-dt-bindings-net-add-QCA807x-PHY.patch deleted file mode 100644 index dfb8d692ab..0000000000 --- a/target/linux/ipq40xx/patches-5.4/706-dt-bindings-net-add-QCA807x-PHY.patch +++ /dev/null @@ -1,61 +0,0 @@ -From c66863c1ba8995b61e6d727d78a241c734f5bb57 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Thu, 1 Oct 2020 15:05:35 +0200 -Subject: [PATCH] dt-bindings: net: add QCA807x PHY - -Add DT bindings for Qualcomm QCA807x PHY series. - -Signed-off-by: Robert Marko ---- - include/dt-bindings/net/qcom-qca807x.h | 45 ++++++++++++++++++++++++++ - 1 file changed, 45 insertions(+) - create mode 100644 include/dt-bindings/net/qcom-qca807x.h - ---- /dev/null -+++ b/include/dt-bindings/net/qcom-qca807x.h -@@ -0,0 +1,45 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+/* -+ * Device Tree constants for the Qualcomm QCA807X PHYs -+ */ -+ -+#ifndef _DT_BINDINGS_QCOM_QCA807X_H -+#define _DT_BINDINGS_QCOM_QCA807X_H -+ -+#define PSGMII_QSGMII_TX_DRIVER_140MV 0 -+#define PSGMII_QSGMII_TX_DRIVER_160MV 1 -+#define PSGMII_QSGMII_TX_DRIVER_180MV 2 -+#define PSGMII_QSGMII_TX_DRIVER_200MV 3 -+#define PSGMII_QSGMII_TX_DRIVER_220MV 4 -+#define PSGMII_QSGMII_TX_DRIVER_240MV 5 -+#define PSGMII_QSGMII_TX_DRIVER_260MV 6 -+#define PSGMII_QSGMII_TX_DRIVER_280MV 7 -+#define PSGMII_QSGMII_TX_DRIVER_300MV 8 -+#define PSGMII_QSGMII_TX_DRIVER_320MV 9 -+#define PSGMII_QSGMII_TX_DRIVER_400MV 10 -+#define PSGMII_QSGMII_TX_DRIVER_500MV 11 -+/* Default value */ -+#define PSGMII_QSGMII_TX_DRIVER_600MV 12 -+ -+/* Full amplitude, full bias current */ -+#define QCA807X_CONTROL_DAC_FULL_VOLT_BIAS 0 -+/* Amplitude follow DSP (amplitude is adjusted based on cable length), half bias current */ -+#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS 1 -+/* Full amplitude, bias current follow DSP (bias current is adjusted based on cable length) */ -+#define QCA807X_CONTROL_DAC_FULL_VOLT_DSP_BIAS 2 -+/* Both amplitude and bias current follow DSP */ -+#define QCA807X_CONTROL_DAC_DSP_VOLT_BIAS 3 -+/* Full amplitude, half bias current */ -+#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS 4 -+/* Amplitude follow DSP setting; 1/4 bias current when cable<10m, -+ * otherwise half bias current -+ */ -+#define QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS 5 -+/* Full amplitude; same bias current setting with “010” and “011”, -+ * but half more bias is reduced when cable <10m -+ */ -+#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS_SHORT 6 -+/* Amplitude follow DSP; same bias current setting with “110”, default value */ -+#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS_SHORT 7 -+ -+#endif diff --git a/target/linux/ipq40xx/patches-5.4/707-net-phy-Add-Qualcom-QCA807x-driver.patch b/target/linux/ipq40xx/patches-5.4/707-net-phy-Add-Qualcom-QCA807x-driver.patch deleted file mode 100644 index 3bd88d1505..0000000000 --- a/target/linux/ipq40xx/patches-5.4/707-net-phy-Add-Qualcom-QCA807x-driver.patch +++ /dev/null @@ -1,50 +0,0 @@ -From f825cdc8bfde7616a14e2163f16303a8973031d2 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 7 Oct 2020 17:38:48 +0200 -Subject: [PATCH] net: phy: Add Qualcom QCA807x driver - -This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s. - -They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s. - -They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC, while second one is SGMII for connection to MAC or fiber. - -Both models have a combo port that supports 1000BASE-X and 100BASE-FX fiber. - -Each PHY inside of QCA807x series has 4 digitally controlled output only pins that natively drive LED-s. -But some vendors used these to driver generic LED-s controlled by userspace, -so lets enable registering each PHY as GPIO controller and add driver for it. - -These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x boards. - -Signed-off-by: Robert Marko ---- - drivers/net/phy/Kconfig | 6 ++++++ - drivers/net/phy/Makefile | 1 + - 2 files changed, 7 insertions(+) - ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -533,6 +533,12 @@ config NXP_TJA11XX_PHY - ---help--- - Currently supports the NXP TJA1100 and TJA1101 PHY. - -+config QCA807X_PHY -+ tristate "Qualcomm QCA807X PHYs" -+ depends on OF_MDIO -+ help -+ Currently supports the QCA8072 and QCA8075 models. -+ - config QSEMI_PHY - tristate "Quality Semiconductor PHYs" - ---help--- ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -102,6 +102,7 @@ obj-$(CONFIG_MICROSEMI_PHY) += mscc.o - obj-$(CONFIG_NATIONAL_PHY) += national.o - obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o - obj-$(CONFIG_QSEMI_PHY) += qsemi.o -+obj-$(CONFIG_QCA807X_PHY) += qca807x.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_RENESAS_PHY) += uPD60620.o - obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o diff --git a/target/linux/ipq40xx/patches-5.4/708-arm-dts-ipq4019-QCA807x-properties.patch b/target/linux/ipq40xx/patches-5.4/708-arm-dts-ipq4019-QCA807x-properties.patch deleted file mode 100644 index 4b04a3ce9a..0000000000 --- a/target/linux/ipq40xx/patches-5.4/708-arm-dts-ipq4019-QCA807x-properties.patch +++ /dev/null @@ -1,62 +0,0 @@ -From e0fa88eaa3c176b71e563da68949ac2ab45aaa61 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 2 Oct 2020 10:43:26 +0200 -Subject: [PATCH] arm: dts: ipq4019: QCA807x properties - -This adds necessary DT properties for QCA807x PHY-s to IPQ4019 DTSI. - -Signed-off-by: Robert Marko ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -8,6 +8,7 @@ - #include - #include - #include -+#include - - / { - #address-cells = <1>; -@@ -597,22 +598,39 @@ - - ethphy0: ethernet-phy@0 { - reg = <0>; -+ -+ qcom,control-dac = ; - }; - - ethphy1: ethernet-phy@1 { - reg = <1>; -+ -+ qcom,control-dac = ; - }; - - ethphy2: ethernet-phy@2 { - reg = <2>; -+ -+ qcom,control-dac = ; - }; - - ethphy3: ethernet-phy@3 { - reg = <3>; -+ -+ qcom,control-dac = ; - }; - - ethphy4: ethernet-phy@4 { - reg = <4>; -+ -+ qcom,control-dac = ; -+ }; -+ -+ psgmiiphy: psgmii-phy@5 { -+ reg = <5>; -+ -+ qcom,tx-driver-strength = ; -+ qcom,psgmii-az; - }; - }; - diff --git a/target/linux/ipq40xx/patches-5.4/710-net-add-qualcomm-essedma-ethernet-driver.patch b/target/linux/ipq40xx/patches-5.4/710-net-add-qualcomm-essedma-ethernet-driver.patch deleted file mode 100644 index 793ce72142..0000000000 --- a/target/linux/ipq40xx/patches-5.4/710-net-add-qualcomm-essedma-ethernet-driver.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Thu, 19 Jan 2017 02:01:31 +0100 -Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver - -Signed-off-by: Christian Lamparter ---- - drivers/net/ethernet/qualcomm/Kconfig | 9 +++++++++ - drivers/net/ethernet/qualcomm/Makefile | 1 + - 2 files changed, 10 insertions(+) - ---- a/drivers/net/ethernet/qualcomm/Kconfig -+++ b/drivers/net/ethernet/qualcomm/Kconfig -@@ -62,4 +62,14 @@ config QCOM_EMAC - - source "drivers/net/ethernet/qualcomm/rmnet/Kconfig" - -+config ESSEDMA -+ tristate "Qualcomm Atheros ESS Edma support" -+ depends on OF_MDIO -+ help -+ This driver supports ethernet edma adapter. -+ Say Y to build this driver. -+ -+ To compile this driver as a module, choose M here. The module -+ will be called essedma.ko. -+ - endif # NET_VENDOR_QUALCOMM ---- a/drivers/net/ethernet/qualcomm/Makefile -+++ b/drivers/net/ethernet/qualcomm/Makefile -@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o - qcauart-objs := qca_uart.o - - obj-y += emac/ -+obj-$(CONFIG_ESSEDMA) += essedma/ - - obj-$(CONFIG_RMNET) += rmnet/ diff --git a/target/linux/ipq40xx/patches-5.4/711-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq40xx/patches-5.4/711-dts-ipq4019-add-ethernet-essedma-node.patch deleted file mode 100644 index 7b2ddfe00d..0000000000 --- a/target/linux/ipq40xx/patches-5.4/711-dts-ipq4019-add-ethernet-essedma-node.patch +++ /dev/null @@ -1,92 +0,0 @@ -From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 20 Nov 2016 01:01:10 +0100 -Subject: [PATCH] dts: ipq4019: add ethernet essedma node - -This patch adds the device-tree node for the ethernet -interfaces. - -Note: The driver isn't anywhere close to be upstream, -so the info might change. - -Signed-off-by: Christian Lamparter ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++ - 1 file changed, 60 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -39,6 +39,8 @@ - spi1 = &blsp1_spi2; - i2c0 = &blsp1_i2c3; - i2c1 = &blsp1_i2c4; -+ ethernet0 = &gmac0; -+ ethernet1 = &gmac1; - }; - - cpus { -@@ -657,6 +659,64 @@ - status = "disabled"; - }; - -+ edma@c080000 { -+ compatible = "qcom,ess-edma"; -+ reg = <0xc080000 0x8000>; -+ qcom,page-mode = <0>; -+ qcom,rx_head_buf_size = <1540>; -+ qcom,mdio_supported; -+ qcom,poll_required = <1>; -+ qcom,num_gmac = <2>; -+ interrupts = <0 65 IRQ_TYPE_EDGE_RISING -+ 0 66 IRQ_TYPE_EDGE_RISING -+ 0 67 IRQ_TYPE_EDGE_RISING -+ 0 68 IRQ_TYPE_EDGE_RISING -+ 0 69 IRQ_TYPE_EDGE_RISING -+ 0 70 IRQ_TYPE_EDGE_RISING -+ 0 71 IRQ_TYPE_EDGE_RISING -+ 0 72 IRQ_TYPE_EDGE_RISING -+ 0 73 IRQ_TYPE_EDGE_RISING -+ 0 74 IRQ_TYPE_EDGE_RISING -+ 0 75 IRQ_TYPE_EDGE_RISING -+ 0 76 IRQ_TYPE_EDGE_RISING -+ 0 77 IRQ_TYPE_EDGE_RISING -+ 0 78 IRQ_TYPE_EDGE_RISING -+ 0 79 IRQ_TYPE_EDGE_RISING -+ 0 80 IRQ_TYPE_EDGE_RISING -+ 0 240 IRQ_TYPE_EDGE_RISING -+ 0 241 IRQ_TYPE_EDGE_RISING -+ 0 242 IRQ_TYPE_EDGE_RISING -+ 0 243 IRQ_TYPE_EDGE_RISING -+ 0 244 IRQ_TYPE_EDGE_RISING -+ 0 245 IRQ_TYPE_EDGE_RISING -+ 0 246 IRQ_TYPE_EDGE_RISING -+ 0 247 IRQ_TYPE_EDGE_RISING -+ 0 248 IRQ_TYPE_EDGE_RISING -+ 0 249 IRQ_TYPE_EDGE_RISING -+ 0 250 IRQ_TYPE_EDGE_RISING -+ 0 251 IRQ_TYPE_EDGE_RISING -+ 0 252 IRQ_TYPE_EDGE_RISING -+ 0 253 IRQ_TYPE_EDGE_RISING -+ 0 254 IRQ_TYPE_EDGE_RISING -+ 0 255 IRQ_TYPE_EDGE_RISING>; -+ -+ status = "disabled"; -+ -+ gmac0: gmac0 { -+ local-mac-address = [00 00 00 00 00 00]; -+ vlan_tag = <1 0x1f>; -+ }; -+ -+ gmac1: gmac1 { -+ local-mac-address = [00 00 00 00 00 00]; -+ qcom,phy_mdio_addr = <4>; -+ qcom,poll_required = <1>; -+ qcom,forced_speed = <1000>; -+ qcom,forced_duplex = <1>; -+ vlan_tag = <2 0x20>; -+ }; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - compatible = "qcom,usb-ss-ipq4019-phy"; - #phy-cells = <0>; diff --git a/target/linux/ipq40xx/patches-5.4/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq40xx/patches-5.4/850-soc-add-qualcomm-syscon.patch deleted file mode 100644 index 17e9047dfb..0000000000 --- a/target/linux/ipq40xx/patches-5.4/850-soc-add-qualcomm-syscon.patch +++ /dev/null @@ -1,180 +0,0 @@ -From: Christian Lamparter -Subject: SoC: add qualcomm syscon ---- a/drivers/soc/qcom/Makefile -+++ b/drivers/soc/qcom/Makefile -@@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o - obj-$(CONFIG_QCOM_SMSM) += smsm.o - obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o - obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o -+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o - obj-$(CONFIG_QCOM_APR) += apr.o - obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o - obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o ---- a/drivers/soc/qcom/Kconfig -+++ b/drivers/soc/qcom/Kconfig -@@ -183,6 +183,13 @@ config QCOM_SOCINFO - Say yes here to support the Qualcomm socinfo driver, providing - information about the SoC to user space. - -+config QCOM_TCSR -+ tristate "QCOM Top Control and Status Registers" -+ depends on ARCH_QCOM -+ help -+ Say y here to enable TCSR support. The TCSR provides control -+ functions for various peripherals. -+ - config QCOM_WCNSS_CTRL - tristate "Qualcomm WCNSS control driver" - depends on ARCH_QCOM || COMPILE_TEST ---- /dev/null -+++ b/drivers/soc/qcom/qcom_tcsr.c -@@ -0,0 +1,98 @@ -+/* -+ * Copyright (c) 2014, The Linux foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License rev 2 and -+ * only rev 2 as published by the free Software foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define TCSR_USB_PORT_SEL 0xb0 -+#define TCSR_USB_HSPHY_CONFIG 0xC -+ -+#define TCSR_ESS_INTERFACE_SEL_OFFSET 0x0 -+#define TCSR_ESS_INTERFACE_SEL_MASK 0xf -+ -+#define TCSR_WIFI0_GLB_CFG_OFFSET 0x0 -+#define TCSR_WIFI1_GLB_CFG_OFFSET 0x4 -+#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2 0x4 -+ -+static int tcsr_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ const struct device_node *node = pdev->dev.of_node; -+ void __iomem *base; -+ u32 val; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) { -+ dev_err(&pdev->dev, "setting usb port select = %d\n", val); -+ writel(val, base + TCSR_USB_PORT_SEL); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) { -+ dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val); -+ writel(val, base + TCSR_USB_HSPHY_CONFIG); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) { -+ u32 tmp = 0; -+ dev_info(&pdev->dev, "setting ess interface select = %x\n", val); -+ tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET); -+ tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK); -+ tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK); -+ writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) { -+ dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val); -+ writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET); -+ writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) { -+ dev_info(&pdev->dev, -+ "setting wifi_noc_memtype_m0_m2 = %x\n", val); -+ writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2); -+ } -+ -+ return 0; -+} -+ -+static const struct of_device_id tcsr_dt_match[] = { -+ { .compatible = "qcom,tcsr", }, -+ { }, -+}; -+ -+MODULE_DEVICE_TABLE(of, tcsr_dt_match); -+ -+static struct platform_driver tcsr_driver = { -+ .driver = { -+ .name = "tcsr", -+ .owner = THIS_MODULE, -+ .of_match_table = tcsr_dt_match, -+ }, -+ .probe = tcsr_probe, -+}; -+ -+module_platform_driver(tcsr_driver); -+ -+MODULE_AUTHOR("Andy Gross "); -+MODULE_DESCRIPTION("QCOM TCSR driver"); -+MODULE_LICENSE("GPL v2"); ---- /dev/null -+++ b/include/dt-bindings/soc/qcom,tcsr.h -@@ -0,0 +1,48 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+#ifndef __DT_BINDINGS_QCOM_TCSR_H -+#define __DT_BINDINGS_QCOM_TCSR_H -+ -+#define TCSR_USB_SELECT_USB3_P0 0x1 -+#define TCSR_USB_SELECT_USB3_P1 0x2 -+#define TCSR_USB_SELECT_USB3_DUAL 0x3 -+ -+/* IPQ40xx HS PHY Mode Select */ -+#define TCSR_USB_HSPHY_HOST_MODE 0x00E700E7 -+#define TCSR_USB_HSPHY_DEVICE_MODE 0x00C700E7 -+ -+/* IPQ40xx ess interface mode select */ -+#define TCSR_ESS_PSGMII 0 -+#define TCSR_ESS_PSGMII_RGMII5 1 -+#define TCSR_ESS_PSGMII_RMII0 2 -+#define TCSR_ESS_PSGMII_RMII1 4 -+#define TCSR_ESS_PSGMII_RMII0_RMII1 6 -+#define TCSR_ESS_PSGMII_RGMII4 9 -+ -+/* -+ * IPQ40xx WiFi Global Config -+ * Bit 30:AXID_EN -+ * Enable AXI master bus Axid translating to confirm all txn submitted by order -+ * Bit 24: Use locally generated socslv_wxi_bvalid -+ * 1: use locally generate socslv_wxi_bvalid for performance. -+ * 0: use SNOC socslv_wxi_bvalid. -+ */ -+#define TCSR_WIFI_GLB_CFG 0x41000000 -+ -+/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */ -+#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 0x02222222 -+ -+/* TCSR A/B REG */ -+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0 -+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1 -+ -+#endif diff --git a/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch deleted file mode 100644 index 5a245eb431..0000000000 --- a/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch +++ /dev/null @@ -1,176 +0,0 @@ ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -15,6 +15,7 @@ - */ - - #include "qcom-ipq4019.dtsi" -+#include - - / { - model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; -@@ -29,6 +30,32 @@ - }; - - soc { -+ tcsr@194b000 { -+ /* select hostmode */ -+ compatible = "qcom,tcsr"; -+ reg = <0x194b000 0x100>; -+ qcom,usb-hsphy-mode-select = ; -+ status = "okay"; -+ }; -+ -+ ess_tcsr@1953000 { -+ compatible = "qcom,tcsr"; -+ reg = <0x1953000 0x1000>; -+ qcom,ess-interface-select = ; -+ }; -+ -+ tcsr@1949000 { -+ compatible = "qcom,tcsr"; -+ reg = <0x1949000 0x100>; -+ qcom,wifi_glb_cfg = ; -+ }; -+ -+ tcsr@1957000 { -+ compatible = "qcom,tcsr"; -+ reg = <0x1957000 0x100>; -+ qcom,wifi_noc_memtype_m0_m2 = ; -+ }; -+ - rng@22000 { - status = "ok"; - }; -@@ -74,14 +101,6 @@ - pinctrl-names = "default"; - status = "ok"; - cs-gpios = <&tlmm 54 0>; -- -- mx25l25635e@0 { -- #address-cells = <1>; -- #size-cells = <1>; -- reg = <0>; -- compatible = "mx25l25635e"; -- spi-max-frequency = <24000000>; -- }; - }; - - serial@78af000 { -@@ -109,5 +128,41 @@ - wifi@a800000 { - status = "ok"; - }; -+ -+ mdio@90000 { -+ status = "okay"; -+ }; -+ -+ ess-switch@c000000 { -+ status = "okay"; -+ }; -+ -+ ess-psgmii@98000 { -+ status = "okay"; -+ }; -+ -+ edma@c080000 { -+ status = "okay"; -+ }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ status = "okay"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ status = "okay"; -+ }; -+ -+ usb3: usb3@8af8800 { -+ status = "okay"; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ status = "okay"; -+ }; -+ -+ usb2: usb2@60f8800 { -+ status = "okay"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -@@ -18,5 +18,73 @@ - - / { - model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; -+ compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1"; - -+ memory { -+ device_type = "memory"; -+ reg = <0x80000000 0x10000000>; -+ }; -+}; -+ -+&blsp1_spi1 { -+ mx25l25635f@0 { -+ compatible = "mx25l25635f", "jedec,spi-nor"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ reg = <0>; -+ spi-max-frequency = <24000000>; -+ -+ SBL1@0 { -+ label = "SBL1"; -+ reg = <0x0 0x40000>; -+ read-only; -+ }; -+ MIBIB@40000 { -+ label = "MIBIB"; -+ reg = <0x40000 0x20000>; -+ read-only; -+ }; -+ QSEE@60000 { -+ label = "QSEE"; -+ reg = <0x60000 0x60000>; -+ read-only; -+ }; -+ CDT@c0000 { -+ label = "CDT"; -+ reg = <0xc0000 0x10000>; -+ read-only; -+ }; -+ DDRPARAMS@d0000 { -+ label = "DDRPARAMS"; -+ reg = <0xd0000 0x10000>; -+ read-only; -+ }; -+ APPSBLENV@e0000 { -+ label = "APPSBLENV"; -+ reg = <0xe0000 0x10000>; -+ read-only; -+ }; -+ APPSBL@f0000 { -+ label = "APPSBL"; -+ reg = <0xf0000 0x80000>; -+ read-only; -+ }; -+ ART@170000 { -+ label = "ART"; -+ reg = <0x170000 0x10000>; -+ read-only; -+ }; -+ kernel@180000 { -+ label = "kernel"; -+ reg = <0x180000 0x400000>; -+ }; -+ rootfs@580000 { -+ label = "rootfs"; -+ reg = <0x580000 0x1600000>; -+ }; -+ firmware@180000 { -+ label = "firmware"; -+ reg = <0x180000 0x1a00000>; -+ }; -+ }; - }; diff --git a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch deleted file mode 100644 index 4270418d6c..0000000000 --- a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch +++ /dev/null @@ -1,82 +0,0 @@ -From a10fab12a927e60b7141a602e740d70cb4d09e4a Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 9 Mar 2017 11:03:18 +0100 -Subject: [PATCH] arm: boot: add dts files - -Signed-off-by: John Crispin ---- - arch/arm/boot/dts/Makefile | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -837,11 +837,69 @@ dtb-$(CONFIG_ARCH_QCOM) += \ - qcom-apq8074-dragonboard.dtb \ - qcom-apq8084-ifc6540.dtb \ - qcom-apq8084-mtp.dtb \ -+ qcom-ipq4018-a42.dtb \ -+ qcom-ipq4018-ap120c-ac.dtb \ -+ qcom-ipq4018-dap-2610.dtb \ -+ qcom-ipq4018-cs-w3-wd1200g-eup.dtb \ -+ qcom-ipq4018-magic-2-wifi-next.dtb \ -+ qcom-ipq4018-ea6350v3.dtb \ -+ qcom-ipq4018-eap1300.dtb \ -+ qcom-ipq4018-ecw5211.dtb \ -+ qcom-ipq4018-emd1.dtb \ -+ qcom-ipq4018-emr3500.dtb \ -+ qcom-ipq4018-ens620ext.dtb \ -+ qcom-ipq4018-ex6100v2.dtb \ -+ qcom-ipq4018-ex6150v2.dtb \ -+ qcom-ipq4018-fritzbox-4040.dtb \ -+ qcom-ipq4018-gl-ap1300.dtb \ -+ qcom-ipq4018-jalapeno.dtb \ -+ qcom-ipq4018-meshpoint-one.dtb \ -+ qcom-ipq4018-hap-ac2.dtb \ -+ qcom-ipq4018-sxtsq-5-ac.dtb \ -+ qcom-ipq4018-nbg6617.dtb \ -+ qcom-ipq4019-oap100.dtb \ -+ qcom-ipq4018-pa1200.dtb \ -+ qcom-ipq4018-rt-ac58u.dtb \ -+ qcom-ipq4018-rutx10.dtb \ -+ qcom-ipq4018-wac510.dtb \ -+ qcom-ipq4018-wre6606.dtb \ -+ qcom-ipq4018-wrtq-329acn.dtb \ - qcom-ipq4019-ap.dk01.1-c1.dtb \ - qcom-ipq4019-ap.dk04.1-c1.dtb \ - qcom-ipq4019-ap.dk04.1-c3.dtb \ - qcom-ipq4019-ap.dk07.1-c1.dtb \ - qcom-ipq4019-ap.dk07.1-c2.dtb \ -+ qcom-ipq4019-a62.dtb \ -+ qcom-ipq4019-cm520-79f.dtb \ -+ qcom-ipq4019-ea8300.dtb \ -+ qcom-ipq4019-eap2200.dtb \ -+ qcom-ipq4019-fritzbox-7530.dtb \ -+ qcom-ipq4019-fritzrepeater-1200.dtb \ -+ qcom-ipq4019-fritzrepeater-3000.dtb \ -+ qcom-ipq4019-hap-ac3.dtb \ -+ qcom-ipq4019-map-ac2200.dtb \ -+ qcom-ipq4019-lhgg-60ad.dtb \ -+ qcom-ipq4019-mr8300.dtb \ -+ qcom-ipq4019-e2600ac-c1.dtb \ -+ qcom-ipq4019-e2600ac-c2.dtb \ -+ qcom-ipq4019-habanero-dvk.dtb \ -+ qcom-ipq4019-pa2200.dtb \ -+ qcom-ipq4019-rbr50.dtb \ -+ qcom-ipq4019-rbs50.dtb \ -+ qcom-ipq4019-rtl30vw.dtb \ -+ qcom-ipq4019-srr60.dtb \ -+ qcom-ipq4019-srs60.dtb \ -+ qcom-ipq4019-u4019-32m.dtb \ -+ qcom-ipq4019-wpj419.dtb \ -+ qcom-ipq4019-wtr-m2133hp.dtb \ -+ qcom-ipq4028-wpj428.dtb \ -+ qcom-ipq4029-ap-303.dtb \ -+ qcom-ipq4029-ap-303h.dtb \ -+ qcom-ipq4029-ap-365.dtb \ -+ qcom-ipq4029-gl-b1300.dtb \ -+ qcom-ipq4019-gl-b2200.dtb \ -+ qcom-ipq4029-gl-s1300.dtb \ -+ qcom-ipq4029-mr33.dtb \ - qcom-ipq8064-ap148.dtb \ - qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb \ diff --git a/target/linux/ipq40xx/patches-5.4/902-dts-ipq4019-ap-dk04.1.patch b/target/linux/ipq40xx/patches-5.4/902-dts-ipq4019-ap-dk04.1.patch deleted file mode 100644 index ca32144846..0000000000 --- a/target/linux/ipq40xx/patches-5.4/902-dts-ipq4019-ap-dk04.1.patch +++ /dev/null @@ -1,167 +0,0 @@ ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi -@@ -17,53 +17,79 @@ - stdout-path = "serial0:115200n8"; - }; - -- memory { -- device_type = "memory"; -- reg = <0x80000000 0x10000000>; /* 256MB */ -- }; -- - soc { -+ rng@22000 { -+ status = "okay"; -+ }; -+ - pinctrl@1000000 { - serial_0_pins: serial0-pinmux { -- pins = "gpio16", "gpio17"; -- function = "blsp_uart0"; -- bias-disable; -+ mux { -+ pins = "gpio16", "gpio17"; -+ function = "blsp_uart0"; -+ bias-disable; -+ }; - }; - - serial_1_pins: serial1-pinmux { -- pins = "gpio8", "gpio9", -- "gpio10", "gpio11"; -- function = "blsp_uart1"; -- bias-disable; -+ mux { -+ pins = "gpio8", "gpio9"; -+ function = "blsp_uart1"; -+ bias-disable; -+ }; - }; - - spi_0_pins: spi-0-pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; -- bias-disable; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; -+ }; -+ pinconf { -+ pins = "gpio13", "gpio14", "gpio15"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ pinconf_cs { -+ pins = "gpio12"; -+ drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c-0-pinmux { -- pins = "gpio20", "gpio21"; -- function = "blsp_i2c0"; -- bias-disable; -+ pinmux { -+ function = "blsp_i2c0"; -+ pins = "gpio10", "gpio11"; -+ }; -+ pinconf { -+ pins = "gpio10", "gpio11"; -+ drive-strength = <16>; -+ bias-disable; -+ }; - }; - - nand_pins: nand-pins { -- pins = "gpio53", "gpio55", "gpio56", -- "gpio57", "gpio58", "gpio59", -- "gpio60", "gpio62", "gpio63", -- "gpio64", "gpio65", "gpio66", -- "gpio67", "gpio68", "gpio69"; -- function = "qpic"; -+ pullups { -+ pins = "gpio52", "gpio53", "gpio58", -+ "gpio59"; -+ function = "qpic"; -+ bias-pull-up; -+ }; -+ -+ pulldowns { -+ pins = "gpio54", "gpio55", "gpio56", -+ "gpio57", "gpio60", "gpio61", -+ "gpio62", "gpio63", "gpio64", -+ "gpio65", "gpio66", "gpio67", -+ "gpio68", "gpio69"; -+ function = "qpic"; -+ bias-pull-down; -+ }; - }; - }; - -@@ -89,11 +115,11 @@ - status = "ok"; - cs-gpios = <&tlmm 12 0>; - -- m25p80@0 { -+ mx25l25635e@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; -- compatible = "n25q128a11"; -+ compatible = "mx25l25635e"; - spi-max-frequency = <24000000>; - }; - }; -@@ -103,9 +129,48 @@ - perst-gpio = <&tlmm 38 0x1>; - }; - -+ i2c0: i2c@78b7000 { /* BLSP1 QUP2 */ -+ pinctrl-0 = <&i2c_0_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+ }; -+ - qpic-nand@79b0000 { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ status = "okay"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ status = "okay"; -+ }; -+ -+ usb3: usb3@8af8800 { -+ status = "okay"; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ status = "okay"; -+ }; -+ -+ usb2: usb2@60f8800 { -+ status = "okay"; -+ }; -+ -+ cryptobam: dma@8e04000 { -+ status = "okay"; -+ }; -+ -+ crypto@8e3a000 { -+ status = "okay"; -+ }; -+ -+ watchdog@b017000 { -+ status = "okay"; -+ }; - }; - }; diff --git a/target/linux/ipq40xx/patches-5.4/997-device_tree_cmdline.patch b/target/linux/ipq40xx/patches-5.4/997-device_tree_cmdline.patch deleted file mode 100644 index 3cc032fdd2..0000000000 --- a/target/linux/ipq40xx/patches-5.4/997-device_tree_cmdline.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/of/fdt.c -+++ b/drivers/of/fdt.c -@@ -1059,6 +1059,9 @@ int __init early_init_dt_scan_chosen(uns - p = of_get_flat_dt_prop(node, "bootargs", &l); - if (p != NULL && l > 0) - strlcpy(data, p, min(l, COMMAND_LINE_SIZE)); -+ p = of_get_flat_dt_prop(node, "bootargs-append", &l); -+ if (p != NULL && l > 0) -+ strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE)); - - /* - * CONFIG_CMDLINE is meant to be a default in case nothing else