From: David Härdeman Date: Wed, 30 Mar 2011 14:20:14 +0000 (-0300) Subject: [media] rc-core: fix winbond-cir issues X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b87f2eddfaa2e74b51978f7c8671f3f4777af3fe;p=openwrt%2Fstaging%2Fblogic.git [media] rc-core: fix winbond-cir issues The conversion of winbond-cir to use rc-core seems to have missed a a few bits and pieces which were in my local tree. Kudos to Juan Jesús García de Soria Lucena for noticing. [mchehab@redhat.com: fix two UTF-8 violations] Signed-off-by: David Härdeman Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c index 5d06b899e859..18e70d104f80 100644 --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -6,8 +6,8 @@ * could probably support others (Winbond WEC102X, NatSemi, etc) * with minor modifications. * - * Original Author: David Härdeman - * Copyright (C) 2009 - 2010 David Härdeman + * Original Author: David Härdeman + * Copyright (C) 2009 - 2011 David Härdeman * * Dedicated to my daughter Matilda, without whose loving attention this * driver would have been finished in half the time and with a fraction @@ -876,18 +876,8 @@ wbcir_init_hw(struct wbcir_data *data) /* prescaler 1.0, tx/rx fifo lvl 16 */ outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2); - /* Set baud divisor to generate one byte per bit/cell */ - switch (protocol) { - case IR_PROTOCOL_RC5: - outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL); - break; - case IR_PROTOCOL_RC6: - outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL); - break; - case IR_PROTOCOL_NEC: - outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL); - break; - } + /* Set baud divisor to sample every 10 us */ + outb(0x0F, data->sbase + WBCIR_REG_SP3_BGDL); outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH); /* Set CEIR mode */ @@ -896,9 +886,9 @@ wbcir_init_hw(struct wbcir_data *data) inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */ inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */ - /* Disable RX demod, run-length encoding/decoding, set freq span */ + /* Disable RX demod, enable run-length enc/dec, set freq span */ wbcir_select_bank(data, WBCIR_BANK_7); - outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG); + outb(0x90, data->sbase + WBCIR_REG_SP3_RCCFG); /* Disable timer */ wbcir_select_bank(data, WBCIR_BANK_4);