From: Juuso Oikarinen Date: Mon, 22 Nov 2010 10:59:08 +0000 (+0200) Subject: wl12xx: Unset bssid filter, ssid and bssid from firmware on disassoc X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b84a7d3d9e7cd5a25f4fd32142cebdf4481a74a4;p=openwrt%2Fstaging%2Fblogic.git wl12xx: Unset bssid filter, ssid and bssid from firmware on disassoc On the disassociation event from the mac80211, the wl12xx driver does not clear the chipset configuration related to the AP - i.e. it does not perform a DISCONNECT and then a JOIN with zero SSID and dummy BSSID. Also, it does not unset the BSSID filter. Often this is not a problem, as the above is performed upon entering idle state. But if a scenario arises where a new association is attempted without cycling through idle state, the new association will fail. Fix this by resetting the firmware state on disassociation. Signed-off-by: Juuso Oikarinen Reviewed-by: Luciano Coelho Signed-off-by: Luciano Coelho --- diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c index 31f0e2f6ffc3..708ffe304c6d 100644 --- a/drivers/net/wireless/wl12xx/main.c +++ b/drivers/net/wireless/wl12xx/main.c @@ -2011,9 +2011,12 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, /* Disable the keep-alive feature */ ret = wl1271_acx_keep_alive_mode(wl, false); - if (ret < 0) goto out_sleep; + + /* restore the bssid filter and go to dummy bssid */ + wl1271_unjoin(wl); + wl1271_dummy_join(wl); } }