From: John Crispin Date: Thu, 9 Apr 2015 10:32:37 +0000 (+0000) Subject: ramips: Add support for Microduino MicroWRT X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b7f19a5b261966a6fc2a587ea43c1dd6aa189a55;p=openwrt%2Fstaging%2Fzorun.git ramips: Add support for Microduino MicroWRT MicroWRT is an wireless router with 2 USB,1 ethernet port. It has a 16M flash and 64M DDR2 RAM. You can use most interface, such as i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to combine with the core board. The detailed information, please refer to https://www.microduino.cc/wiki/index.php?title=Main_Page This patch adds support for it. Because there is only one port,so disabled VLAN and use eth0 as lan port. and only a power LED control by power pin. Signed-off-by: 盛凯 SVN-Revision: 45331 --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index d4ec19d6cd..24e1ba8502 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -45,6 +45,7 @@ ramips_setup_interfaces() 3g150b | \ 3g300m | \ + microwrt | \ w150m | \ zte-q7 | \ all0256n | \ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index fc6eb37692..616f4a1a26 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -202,6 +202,9 @@ ramips_board_detect() { *"Planex MZK-750DHP") name="mzk-750dhp" ;; + *"Microduino MicroWRT") + name="microwrt" + ;; *"NBG-419N") name="nbg-419n" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index a5773b5e4d..17b456ba19 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -60,6 +60,7 @@ platform_check_image() { m2m | \ m3 | \ m4 | \ + microwrt | \ mlw221 | \ mlwg2 | \ mofi3500-3gn | \ diff --git a/target/linux/ramips/dts/MicroWRT.dts b/target/linux/ramips/dts/MicroWRT.dts new file mode 100644 index 0000000000..f6e81ddc13 --- /dev/null +++ b/target/linux/ramips/dts/MicroWRT.dts @@ -0,0 +1,107 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "microwrt", "ralink,mt7620a-soc"; + model = "Microduino MicroWRT"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + gpio2: gpio@660 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q128"; + reg = <0 0>; + linux,modalias = "m25p80", "w25q128"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "u-boot-env"; + reg = <0x20000 0x10000>; + read-only; + }; + + factory: partition@30000 { + label = "factory"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "firmware"; + reg = <0x40000 0xfc0000>; + }; + }; + }; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + pcie@10140000 { + status = "okay"; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + ralink,port-map = "llllw"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "wled", "i2c", "wdt", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 1 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 2 1>; + linux,code = <0x211>; + }; + }; + }; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 743f7b4cf6..e6b5112d3e 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -865,6 +865,8 @@ Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1) Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7) Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i) +microwrt_mtd_size=16515072 +Image/Build/Profile/MicroWRT=$(call BuildFirmware/CustomFlash/$(1),$(1),microwrt,MicroWRT,$(microwrt_mtd_size)) ifeq ($(SUBTARGET),mt7620) @@ -895,6 +897,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/ZTE-Q7,$(1)) $(call Image/Build/Profile/ZBT-WA05,$(1)) $(call Image/Build/Profile/ArcherC20i,$(1)) + $(call Image/Build/Profile/MicroWRT,$(1)) endef endif diff --git a/target/linux/ramips/mt7620/profiles/microwrt.mk b/target/linux/ramips/mt7620/profiles/microwrt.mk new file mode 100644 index 0000000000..2b0977d669 --- /dev/null +++ b/target/linux/ramips/mt7620/profiles/microwrt.mk @@ -0,0 +1,9 @@ +define Profile/MicroWRT + NAME:=Microduino MicroWRT + PACKAGES:= kmod-usb-core kmod-usb2 kmod-usb-ohci +endef + +define Profile/MicroWRT/Description + Package set compatible with MicroWRT +endef +$(eval $(call Profile,MicroWRT))