From: John Crispin Date: Wed, 21 Feb 2018 15:17:10 +0000 (+0100) Subject: ipq806x: drop ipq40xx support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b7f115f22a9d79bd45bfe27cfb8d491dac49feb4;p=openwrt%2Fstaging%2Fblogic.git ipq806x: drop ipq40xx support Signed-off-by: John Crispin --- diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds index ea8b7817cbcf..98aac707d5ae 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds @@ -11,14 +11,6 @@ board=$(board_name) boardname="${board##*,}" case "$board" in -avm,fritzbox-4040) - ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt" - ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1" - ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e" - ;; -glinet,gl-b1300) - ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:green:wlan" "phy0tpt" - ;; netgear,d7800 |\ netgear,r7500 |\ netgear,r7500v2 |\ diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index 74223e5b47d3..e279cdd8f6bf 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -12,11 +12,6 @@ board_config_update board=$(board_name) case "$board" in -avm,fritzbox-4040) - ucidef_set_interfaces_lan_wan "eth0" "eth1" - ucidef_add_switch "switch0" \ - "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" - ;; linksys,ea8500) hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) ucidef_add_switch "switch0" \ @@ -33,10 +28,6 @@ tplink,vr2600v) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" ;; -glinet,gl-b1300 |\ -openmesh,a42) - ucidef_set_interfaces_lan_wan "eth1" "eth0" - ;; qcom,ipq8064-db149) ucidef_set_interface_lan "eth1 eth2 eth3" ucidef_add_switch "switch0" \ diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index fa8eb1185764..ed99bd5ea870 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -45,35 +45,6 @@ board=$(board_name) case "$FIRMWARE" in -"ath10k/pre-cal-ahb-a000000.wifi.bin") - case "$board" in - avm,fritzbox-4040) - /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") - ;; - openmesh,a42) - ath10kcal_extract "0:ART" 4096 12064 - ;; - glinet,gl-b1300 |\ - qcom,ap-dk01.1-c1) - ath10kcal_extract "ART" 4096 12064 - ;; - esac - ;; -"ath10k/pre-cal-ahb-a800000.wifi.bin") - case "$board" in - avm,fritzbox-4040) - /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") - ;; - openmesh,a42) - ath10kcal_extract "0:ART" 20480 12064 - ;; - glinet,gl-b1300 |\ - qcom,ap-dk01.1-c1) - ath10kcal_extract "ART" 20480 12064 - ;; - esac - ;; - "ath10k/pre-cal-pci-0000:01:00.0.bin") case $board in linksys,ea8500) diff --git a/target/linux/ipq806x/base-files/lib/upgrade/openmesh.sh b/target/linux/ipq806x/base-files/lib/upgrade/openmesh.sh deleted file mode 100644 index a2c79d9e448e..000000000000 --- a/target/linux/ipq806x/base-files/lib/upgrade/openmesh.sh +++ /dev/null @@ -1,110 +0,0 @@ -# The U-Boot loader of the OpenMesh devices requires image sizes and -# checksums to be provided in the U-Boot environment. -# The OpenMesh devices come with 2 main partitions - while one is active -# sysupgrade will flash the other. The boot order is changed to boot the -# newly flashed partition. If the new partition can't be booted due to -# upgrade failures the previously used partition is loaded. - -platform_do_upgrade_openmesh() { - local tar_file="$1" - local restore_backup - local primary_kernel_mtd - - local setenv_script="/tmp/fw_env_upgrade" - - local kernel_mtd="$(find_mtd_index $PART_NAME)" - local kernel_offset="$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)" - local total_size="$(cat /sys/class/mtd/mtd${kernel_mtd}/size)" - - # detect to which flash region the new image is written to. - # - # 1. check what is the mtd index for the first flash region on this - # device - # 2. check if the target partition ("inactive") has the mtd index of - # the first flash region - # - # - when it is: the new bootseq will be 1,2 and the first region is - # modified - # - when it isnt: bootseq will be 2,1 and the second region is - # modified - # - # The detection has to be done via the hardcoded mtd partition because - # the current boot might be done with the fallback region. Let us - # assume that the current bootseq is 1,2. The bootloader detected that - # the image in flash region 1 is corrupt and thus switches to flash - # region 2. The bootseq in the u-boot-env is now still the same and - # the sysupgrade code can now only rely on the actual mtd indexes and - # not the bootseq variable to detect the currently booted flash - # region/image. - # - # In the above example, an implementation which uses bootseq ("1,2") to - # detect the currently booted image would assume that region 1 is booted - # and then overwrite the variables for the wrong flash region (aka the - # one which isn't modified). This could result in a device which doesn't - # boot anymore to Linux until it was reflashed with ap51-flash. - local next_boot_part="1" - case "$(board_name)" in - openmesh,a42) - primary_kernel_mtd=8 - ;; - *) - echo "failed to detect primary kernel mtd partition for board" - return 1 - ;; - esac - [ "$kernel_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2" - - local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$') - board_dir=${board_dir%/} - - local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c) - local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c) - # rootfs without EOF marker - rootfs_length=$((rootfs_length-4)) - - local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}" - # md5 checksum of rootfs with EOF marker - local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}" - - # - # add tar support to get_image() to use default_do_upgrade() instead? - # - - # take care of restoring a saved config - [ "$SAVE_CONFIG" -eq 1 ] && restore_backup="${MTD_CONFIG_ARGS} -j ${CONF_TAR}" - - # write concatinated kernel + rootfs to flash - tar xf $tar_file ${board_dir}/kernel ${board_dir}/root -O | \ - mtd $restore_backup write - $PART_NAME - - # prepare new u-boot env - if [ "$next_boot_part" = "1" ]; then - echo "bootseq 1,2" > $setenv_script - else - echo "bootseq 2,1" > $setenv_script - fi - - printf "kernel_size_%i 0x%08x\n" $next_boot_part $kernel_length >> $setenv_script - printf "vmlinux_start_addr 0x%08x\n" ${kernel_offset} >> $setenv_script - printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script - printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script - - printf "rootfs_size_%i 0x%08x\n" $next_boot_part $((total_size-kernel_length)) >> $setenv_script - printf "rootfs_start_addr 0x%08x\n" $((kernel_offset+kernel_length)) >> $setenv_script - printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script - printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script - - # store u-boot env changes - fw_setenv -s $setenv_script || { - echo "failed to update U-Boot environment" - return 1 - } -} - -# create /var/lock for the lock "fw_setenv.lock" of fw_setenv -# the rest is copied using ipq806x's RAMFS_COPY_BIN and RAMFS_COPY_DATA -platform_add_ramfs_ubootenv() -{ - mkdir -p $RAM_ROOT/var/lock -} -append sysupgrade_pre_upgrade platform_add_ramfs_ubootenv diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh index 5561dd538c56..c0deeda889e3 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh @@ -17,15 +17,10 @@ platform_do_upgrade() { netgear,r7500 |\ netgear,r7500v2 |\ netgear,r7800 |\ - qcom,ap-dk04.1-c1 |\ qcom,ipq8064-ap148 |\ zyxel,nbg6817) nand_do_upgrade "$ARGV" ;; - openmesh,a42) - PART_NAME="inactive" - platform_do_upgrade_openmesh "$ARGV" - ;; tplink,c2600) PART_NAME="os-image:rootfs" MTD_CONFIG_ARGS="-s 0x200000" diff --git a/target/linux/ipq806x/config-4.9 b/target/linux/ipq806x/config-4.9 index a71b1b819b65..6bc3daf27715 100644 --- a/target/linux/ipq806x/config-4.9 +++ b/target/linux/ipq806x/config-4.9 @@ -2,7 +2,6 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_AMBA_PL08X is not set CONFIG_APQ_GCC_8084=y CONFIG_APQ_MMCC_8084=y -CONFIG_AR40XX_PHY=y CONFIG_AR8216_PHY=y CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y @@ -11,7 +10,6 @@ CONFIG_ARCH_HAS_SG_CHAIN=y CONFIG_ARCH_HAS_TICK_BROADCAST=y CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_IPQ40XX=y # CONFIG_ARCH_MDM9615 is not set CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y CONFIG_ARCH_MSM8960=y @@ -60,7 +58,6 @@ CONFIG_ARM_THUMB=y # CONFIG_ARM_THUMBEE is not set CONFIG_ARM_UNWIND=y CONFIG_ARM_VIRT_EXT=y -CONFIG_AT803X_PHY=y # CONFIG_BINFMT_FLAT is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_MQ_PCI=y @@ -164,7 +161,6 @@ CONFIG_DYNAMIC_DEBUG=y CONFIG_EARLY_PRINTK=y CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y -CONFIG_ESSEDMA=y CONFIG_ETHERNET_PACKET_MANGLE=y CONFIG_FIXED_PHY=y CONFIG_FIX_EARLYCON_MEM=y @@ -190,8 +186,6 @@ CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GPIOLIB=y CONFIG_GPIOLIB_IRQCHIP=y CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_WATCHDOG=y -# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set CONFIG_HANDLE_DOMAIN_IRQ=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_HAS_DMA=y @@ -257,7 +251,7 @@ CONFIG_IOMMU_HELPER=y # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set # CONFIG_IOMMU_IO_PGTABLE_LPAE is not set CONFIG_IOMMU_SUPPORT=y -CONFIG_IPQ_GCC_4019=y +# CONFIG_IPQ_GCC_4019 is not set CONFIG_IPQ_GCC_806X=y # CONFIG_IPQ_LCC_806X is not set CONFIG_IRQCHIP=y @@ -277,7 +271,6 @@ CONFIG_LZO_DECOMPRESS=y CONFIG_MDIO_BITBANG=y CONFIG_MDIO_BOARDINFO=y CONFIG_MDIO_GPIO=y -CONFIG_MDIO_IPQ40XX=y # CONFIG_MDM_GCC_9615 is not set # CONFIG_MDM_LCC_9615 is not set # CONFIG_MFD_MAX77620 is not set @@ -378,7 +371,7 @@ CONFIG_PHY_QCOM_IPQ806X_SATA=y CONFIG_PINCTRL=y CONFIG_PINCTRL_APQ8064=y # CONFIG_PINCTRL_APQ8084 is not set -CONFIG_PINCTRL_IPQ4019=y +# CONFIG_PINCTRL_IPQ4019 is not set CONFIG_PINCTRL_IPQ8064=y # CONFIG_PINCTRL_MDM9615 is not set CONFIG_PINCTRL_MSM=y @@ -444,7 +437,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_SCHED_INFO is not set # CONFIG_SCSI_DMA is not set CONFIG_SERIAL_8250_FSL=y -# CONFIG_SERIAL_AMBA_PL010 is not set # CONFIG_SERIAL_AMBA_PL011 is not set CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y @@ -483,7 +475,6 @@ CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" CONFIG_USB=y CONFIG_USB_COMMON=y # CONFIG_USB_EHCI_HCD is not set -CONFIG_USB_IPQ4019_PHY=y CONFIG_USB_SUPPORT=y # CONFIG_USB_UHCI_HCD is not set CONFIG_USE_OF=y diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-a42.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-a42.dts deleted file mode 100644 index 887be993e844..000000000000 --- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-a42.dts +++ /dev/null @@ -1,244 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2017, Sven Eckelmann - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include "qcom-ipq4019-bus.dtsi" -#include -#include -#include - -/ { - model = "OpenMesh A42"; - compatible = "openmesh,a42", "qcom,ipq4019"; - - reserved-memory { - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - - rsvd1@87000000 { - reg = <0x87000000 0x500000>; - no-map; - }; - - wifi_dump@87500000 { - reg = <0x87500000 0x600000>; - no-map; - }; - - rsvd2@87B00000 { - reg = <0x87b00000 0x500000>; - no-map; - }; - }; - - soc { - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "ok"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - pinctrl@1000000 { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio54"; - }; - pinconf { - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - }; - - blsp_dma: dma@7884000 { - status = "ok"; - }; - - spi_0: spi@78b5000 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "ok"; - cs-gpios = <&tlmm 54 0>; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - /* partitions are passed via bootloader */ - }; - }; - - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "ok"; - }; - - cryptobam: dma@8e04000 { - status = "ok"; - }; - - crypto@8e3a000 { - status = "ok"; - }; - - watchdog@b017000 { - status = "ok"; - }; - - usb2_hs_phy: hsphy@a8000 { - status = "ok"; - }; - - usb2: usb2@60f8800 { - status = "ok"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - wifi@a000000 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A42"; - }; - - wifi@a800000 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A42"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - gpio-leds { - compatible = "gpio-leds"; - - red { - label = "a42:red:status"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - - power: green { - label = "a42:green:status"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - blue { - label = "a42:blue:status"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - /* hw_margin_ms is actually 300s but driver limits it to 60s */ - hw_margin_ms = <60000>; - always-running; - }; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi deleted file mode 100644 index 169505973f0d..000000000000 --- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi +++ /dev/null @@ -1,1142 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include - -/ { - -soc { - ad_hoc_bus: ad-hoc-bus { - compatible = "qcom,msm-bus-device"; - reg = <0x580000 0x14000>, - <0x500000 0x11000>; - reg-names = "snoc-base", "pcnoc-base"; - - /*Buses*/ - - fab_pcnoc: fab-pcnoc { - cell-id = ; - label = "fab-pcnoc"; - qcom,fab-dev; - qcom,base-name = "pcnoc-base"; - qcom,bypass-qos-prg; - qcom,bus-type = <1>; - qcom,qos-off = <0x1000>; - qcom,base-offset = <0x0>; - clocks = <>; - }; - - fab_snoc: fab-snoc { - cell-id = ; - label = "fab-snoc"; - qcom,fab-dev; - qcom,base-name = "snoc-base"; - qcom,bypass-qos-prg; - qcom,bus-type = <1>; - qcom,qos-off = <0x80>; - qcom,base-offset = <0x0>; - clocks = <>; - }; - - /*Masters*/ - - mas_blsp_bam: mas-blsp-bam { - cell-id = ; - label = "mas-blsp-bam"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&pcnoc_m_0>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg - &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg - &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg - &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg - &slv_srif &slv_prng &slv_qdss_cfg - &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt - &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg - &slv_boot_rom &slv_security &slv_spdm - &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg - &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl - &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg - &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg - &slv_sdcc_cfg &slv_snoc_cfg>; - }; - - mas_usb2_bam: mas-usb2-bam { - cell-id = ; - label = "mas-usb2-bam"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,qport = <15>; - qcom,qos-mode = "fixed"; - qcom,connections = <&slv_pcnoc_snoc>; - qcom,prio1 = <1>; - qcom,prio0 = <1>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg - &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg - &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg - &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg - &slv_srif &slv_prng &slv_qdss_cfg - &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt - &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg - &slv_boot_rom &slv_security &slv_spdm - &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg - &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl - &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg - &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg - &slv_sdcc_cfg &slv_snoc_cfg>; - }; - - mas_adss_dma0: mas-adss-dma0 { - cell-id = ; - label = "mas-adss-dma0"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&pcnoc_m_1>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg - &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg - &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg - &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg - &slv_srif &slv_prng &slv_qdss_cfg - &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt - &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg - &slv_boot_rom &slv_security &slv_spdm - &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg - &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl - &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg - &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg - &slv_sdcc_cfg &slv_snoc_cfg>; - }; - - mas_adss_dma1: mas-adss-dma1 { - cell-id = ; - label = "mas-adss-dma1"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&pcnoc_m_1>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg - &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg - &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg - &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg - &slv_srif &slv_prng &slv_qdss_cfg - &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt - &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg - &slv_boot_rom &slv_security &slv_spdm - &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg - &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl - &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg - &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg - &slv_sdcc_cfg &slv_snoc_cfg>; - }; - - mas_adss_dma2: mas-adss-dma2 { - cell-id = ; - label = "mas-adss-dma2"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&pcnoc_m_1>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg - &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg - &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg - &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg - &slv_srif &slv_prng &slv_qdss_cfg - &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt - &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg - &slv_boot_rom &slv_security &slv_spdm - &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg - &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl - &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg - &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg - &slv_sdcc_cfg &slv_snoc_cfg>; - }; - - mas_adss_dma3: mas-adss-dma3 { - cell-id = ; - label = "mas-adss-dma3"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&pcnoc_m_1>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg - &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg - &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg - &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg - &slv_srif &slv_prng &slv_qdss_cfg - &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt - &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg - &slv_boot_rom &slv_security &slv_spdm - &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg - &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl - &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg - &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg - &slv_sdcc_cfg &slv_snoc_cfg>; - }; - - mas_qpic_bam: mas-qpic-bam { - cell-id = ; - label = "mas-qpic-bam"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&pcnoc_m_0>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg - &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg - &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg - &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg - &slv_srif &slv_prng &slv_qdss_cfg - &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt - &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg - &slv_boot_rom &slv_security &slv_spdm - &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg - &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl - &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg - &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg - &slv_sdcc_cfg &slv_snoc_cfg>; - }; - - mas_spdm: mas-spdm { - cell-id = ; - label = "mas-spdm"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&pcnoc_m_0>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg - &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg - &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg - &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg - &slv_srif &slv_prng &slv_qdss_cfg - &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt - &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg - &slv_boot_rom &slv_security &slv_spdm - &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg - &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl - &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg - &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg - &slv_sdcc_cfg &slv_snoc_cfg>; - }; - - mas_pcnoc_cfg: mas-pcnoc-cfg { - cell-id = ; - label = "mas-pcnoc-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&slv_srvc_pcnoc>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - }; - - mas_tic: mas-tic { - cell-id = ; - label = "mas-tic"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&pcnoc_int_0 &slv_pcnoc_snoc>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - }; - - mas_sdcc_bam: mas-sdcc-bam { - cell-id = ; - label = "mas-sdcc-bam"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,qport = <14>; - qcom,qos-mode = "fixed"; - qcom,connections = <&slv_pcnoc_snoc>; - qcom,prio1 = <0>; - qcom,prio0 = <0>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg - &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg - &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg - &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg - &slv_srif &slv_prng &slv_qdss_cfg - &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt - &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg - &slv_boot_rom &slv_security &slv_spdm - &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg - &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl - &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg - &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg - &slv_sdcc_cfg &slv_snoc_cfg>; - }; - - mas_snoc_pcnoc: mas-snoc-pcnoc { - cell-id = ; - label = "mas-snoc-pcnoc"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,qport = <16>; - qcom,qos-mode = "fixed"; - qcom,connections = <&pcnoc_int_0>; - qcom,prio1 = <0>; - qcom,prio0 = <0>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - }; - - mas_qdss_dap: mas-qdss-dap { - cell-id = ; - label = "mas-qdss-dap"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&pcnoc_int_0 &slv_pcnoc_snoc>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - }; - - mas_ddrc_snoc: mas-ddrc-snoc { - cell-id = ; - label = "mas-ddrc-snoc"; - qcom,buswidth = <16>; - qcom,ap-owned; - qcom,connections = <&snoc_int_0 &snoc_int_1 - &slv_pcie>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_snoc_ddrc_m1 &slv_srvc_snoc>; - }; - - mas_wss_0: mas-wss-0 { - cell-id = ; - label = "mas-wss-0"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,qport = <26>; - qcom,qos-mode = "fixed"; - qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>; - qcom,prio1 = <0>; - qcom,prio0 = <0>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_pcie - &slv_wss1_cfg &slv_wss0_cfg &slv_crypto_cfg - &slv_srvc_snoc>; - }; - - mas_wss_1: mas-wss-1 { - cell-id = ; - label = "mas-wss-1"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,qport = <27>; - qcom,qos-mode = "fixed"; - qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>; - qcom,prio1 = <0>; - qcom,prio0 = <0>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_pcie - &slv_wss1_cfg &slv_wss0_cfg &slv_crypto_cfg - &slv_srvc_snoc>; - }; - - mas_crypto: mas-crypto { - cell-id = ; - label = "mas-crypto"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,qport = <5>; - qcom,qos-mode = "fixed"; - qcom,connections = <&snoc_int_0 &snoc_int_1 - &slv_snoc_ddrc_m1>; - qcom,prio1 = <0>; - qcom,prio0 = <0>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss - &slv_pcie &slv_qdss_stm &slv_crypto_cfg - &slv_srvc_snoc>; - }; - - mas_ess: mas-ess { - cell-id = ; - label = "mas-ess"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,qport = <44>; - qcom,qos-mode = "fixed"; - qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>; - qcom,prio1 = <0>; - qcom,prio0 = <0>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss - &slv_pcie &slv_qdss_stm &slv_wss1_cfg - &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>; - }; - - mas_pcie: mas-pcie { - cell-id = ; - label = "mas-pcie"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,qport = <6>; - qcom,qos-mode = "fixed"; - qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>; - qcom,prio1 = <0>; - qcom,prio0 = <0>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_pcie - &slv_qdss_stm &slv_wss1_cfg &slv_wss0_cfg - &slv_crypto_cfg &slv_srvc_snoc>; - }; - - mas_usb3: mas-usb3 { - cell-id = ; - label = "mas-usb3"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,qport = <7>; - qcom,qos-mode = "fixed"; - qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>; - qcom,prio1 = <0>; - qcom,prio0 = <0>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss - &slv_pcie &slv_qdss_stm &slv_wss1_cfg - &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>; - }; - - mas_qdss_etr: mas-qdss-etr { - cell-id = ; - label = "mas-qdss-etr"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,qport = <544>; - qcom,qos-mode = "fixed"; - qcom,connections = <&qdss_int>; - qcom,prio1 = <0>; - qcom,prio0 = <0>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss - &slv_pcie &slv_qdss_stm &slv_wss1_cfg - &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>; - }; - - mas_qdss_bamndp: mas-qdss-bamndp { - cell-id = ; - label = "mas-qdss-bamndp"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,qport = <576>; - qcom,qos-mode = "fixed"; - qcom,connections = <&qdss_int>; - qcom,prio1 = <0>; - qcom,prio0 = <0>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss - &slv_pcie &slv_qdss_stm &slv_wss1_cfg - &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>; - }; - - mas_pcnoc_snoc: mas-pcnoc-snoc { - cell-id = ; - label = "mas-pcnoc-snoc"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,qport = <384>; - qcom,qos-mode = "fixed"; - qcom,connections = <&snoc_int_0 &snoc_int_1 - &slv_snoc_ddrc_m1>; - qcom,prio1 = <0>; - qcom,prio0 = <0>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - qcom,blacklist = <&slv_srvc_snoc>; - }; - - mas_snoc_cfg: mas-snoc-cfg { - cell-id = ; - label = "mas-snoc-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&slv_srvc_snoc>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - }; - - /*Internal nodes*/ - - - pcnoc_m_0: pcnoc-m-0 { - cell-id = ; - label = "pcnoc-m-0"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,qport = <12>; - qcom,qos-mode = "fixed"; - qcom,connections = <&slv_pcnoc_snoc>; - qcom,prio1 = <1>; - qcom,prio0 = <1>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - pcnoc_m_1: pcnoc-m-1 { - cell-id = ; - label = "pcnoc-m-1"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,qport = <13>; - qcom,qos-mode = "fixed"; - qcom,connections = <&slv_pcnoc_snoc>; - qcom,prio1 = <1>; - qcom,prio0 = <1>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - pcnoc_int_0: pcnoc-int-0 { - cell-id = ; - label = "pcnoc-int-0"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,connections = < &pcnoc_s_1 &pcnoc_s_2 &pcnoc_s_0 - &pcnoc_s_4 &pcnoc_s_5 - &pcnoc_s_6 &pcnoc_s_7 - &pcnoc_s_8 &pcnoc_s_9 - &pcnoc_s_3>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - pcnoc_s_0: pcnoc-s-0 { - cell-id = ; - label = "pcnoc-s-0"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&slv_clk_ctl &slv_tcsr &slv_security - &slv_tlmm>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - pcnoc_s_1: pcnoc-s-1 { - cell-id = ; - label = "pcnoc-s-1"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = < &slv_prng_apu_cfg &slv_prng&slv_imem_cfg>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - pcnoc_s_2: pcnoc-s-2 { - cell-id = ; - label = "pcnoc-s-2"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = < &slv_spdm &slv_pcnoc_mpu_cfg &slv_pcnoc_cfg - &slv_boot_rom>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - pcnoc_s_3: pcnoc-s-3 { - cell-id = ; - label = "pcnoc-s-3"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = < &slv_qdss_cfg&slv_gcnt &slv_snoc_cfg - &slv_snoc_mpu_cfg>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - pcnoc_s_4: pcnoc-s-4 { - cell-id = ; - label = "pcnoc-s-4"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&slv_adss_cfg &slv_adss_vmidmt_cfg &slv_adss_apu>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - pcnoc_s_5: pcnoc-s-5 { - cell-id = ; - label = "pcnoc-s-5"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = <&slv_qhss_apu_cfg &slv_fephy_cfg &slv_mdio - &slv_srif>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - pcnoc_s_6: pcnoc-s-6 { - cell-id = ; - label = "pcnoc-s-6"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = < &slv_ddrc_mpu0_cfg &slv_ddrc_apu_cfg &slv_ddrc_mpu2_cfg - &slv_ddrc_cfg &slv_ddrc_mpu1_cfg>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - pcnoc_s_7: pcnoc-s-7 { - cell-id = ; - label = "pcnoc-s-7"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = < &slv_ess_apu_cfg &slv_usb2_cfg&slv_ess_vmidmt_cfg>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - pcnoc_s_8: pcnoc-s-8 { - cell-id = ; - label = "pcnoc-s-8"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = < &slv_sdcc_cfg &slv_qpic_cfg&slv_blsp_cfg>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - pcnoc_s_9: pcnoc-s-9 { - cell-id = ; - label = "pcnoc-s-9"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,connections = < &slv_wss1_apu_cfg &slv_wss1_vmidmt_cfg&slv_wss0_vmidmt_cfg - &slv_wss0_apu_cfg>; - qcom,bus-dev = <&fab_pcnoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - snoc_int_0: snoc-int-0 { - cell-id = ; - label = "snoc-int-0"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,connections = < &slv_ocimem&slv_qdss_stm>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - snoc_int_1: snoc-int-1 { - cell-id = ; - label = "snoc-int-1"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,connections = < &slv_crypto_cfg &slv_a7ss &slv_ess_cfg - &slv_usb3_cfg &slv_wss1_cfg - &slv_wss0_cfg>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - - qdss_int: qdss-int { - cell-id = ; - label = "qdss-int"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>; - qcom,bus-dev = <&fab_snoc>; - qcom,mas-rpm-id = ; - qcom,slv-rpm-id = ; - }; - /*Slaves*/ - - slv_clk_ctl:slv-clk-ctl { - cell-id = ; - label = "slv-clk-ctl"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_security:slv-security { - cell-id = ; - label = "slv-security"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_tcsr:slv-tcsr { - cell-id = ; - label = "slv-tcsr"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_tlmm:slv-tlmm { - cell-id = ; - label = "slv-tlmm"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_imem_cfg:slv-imem-cfg { - cell-id = ; - label = "slv-imem-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_prng:slv-prng { - cell-id = ; - label = "slv-prng"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_prng_apu_cfg:slv-prng-apu-cfg { - cell-id = ; - label = "slv-prng-apu-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_boot_rom:slv-boot-rom { - cell-id = ; - label = "slv-boot-rom"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_spdm:slv-spdm { - cell-id = ; - label = "slv-spdm"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_pcnoc_cfg:slv-pcnoc-cfg { - cell-id = ; - label = "slv-pcnoc-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_pcnoc_mpu_cfg:slv-pcnoc-mpu-cfg { - cell-id = ; - label = "slv-pcnoc-mpu-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_gcnt:slv-gcnt { - cell-id = ; - label = "slv-gcnt"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_qdss_cfg:slv-qdss-cfg { - cell-id = ; - label = "slv-qdss-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_snoc_cfg:slv-snoc-cfg { - cell-id = ; - label = "slv-snoc-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_snoc_mpu_cfg:slv-snoc-mpu-cfg { - cell-id = ; - label = "slv-snoc-mpu-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_adss_cfg:slv-adss-cfg { - cell-id = ; - label = "slv-adss-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_adss_apu:slv-adss-apu { - cell-id = ; - label = "slv-adss-apu"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_adss_vmidmt_cfg:slv-adss-vmidmt-cfg { - cell-id = ; - label = "slv-adss-vmidmt-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_qhss_apu_cfg:slv-qhss-apu-cfg { - cell-id = ; - label = "slv-qhss-apu-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_mdio:slv-mdio { - cell-id = ; - label = "slv-mdio"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_fephy_cfg:slv-fephy-cfg { - cell-id = ; - label = "slv-fephy-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_srif:slv-srif { - cell-id = ; - label = "slv-srif"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_ddrc_cfg:slv-ddrc-cfg { - cell-id = ; - label = "slv-ddrc-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_ddrc_apu_cfg:slv-ddrc-apu-cfg { - cell-id = ; - label = "slv-ddrc-apu-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_ddrc_mpu0_cfg:slv-ddrc-mpu0-cfg { - cell-id = ; - label = "slv-ddrc-mpu0-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_ddrc_mpu1_cfg:slv-ddrc-mpu1-cfg { - cell-id = ; - label = "slv-ddrc-mpu1-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_ddrc_mpu2_cfg:slv-ddrc-mpu2-cfg { - cell-id = ; - label = "slv-ddrc-mpu2-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_ess_vmidmt_cfg:slv-ess-vmidmt-cfg { - cell-id = ; - label = "slv-ess-vmidmt-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_ess_apu_cfg:slv-ess-apu-cfg { - cell-id = ; - label = "slv-ess-apu-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_usb2_cfg:slv-usb2-cfg { - cell-id = ; - label = "slv-usb2-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_blsp_cfg:slv-blsp-cfg { - cell-id = ; - label = "slv-blsp-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_qpic_cfg:slv-qpic-cfg { - cell-id = ; - label = "slv-qpic-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_sdcc_cfg:slv-sdcc-cfg { - cell-id = ; - label = "slv-sdcc-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_wss0_vmidmt_cfg:slv-wss0-vmidmt-cfg { - cell-id = ; - label = "slv-wss0-vmidmt-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_wss0_apu_cfg:slv-wss0-apu-cfg { - cell-id = ; - label = "slv-wss0-apu-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_wss1_vmidmt_cfg:slv-wss1-vmidmt-cfg { - cell-id = ; - label = "slv-wss1-vmidmt-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_wss1_apu_cfg:slv-wss1-apu-cfg { - cell-id = ; - label = "slv-wss1-apu-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_pcnoc_snoc:slv-pcnoc-snoc { - cell-id = ; - label = "slv-pcnoc-snoc"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_srvc_pcnoc:slv-srvc-pcnoc { - cell-id = ; - label = "slv-srvc-pcnoc"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_pcnoc>; - qcom,slv-rpm-id = ; - }; - - slv_snoc_ddrc_m1:slv-snoc-ddrc-m1 { - cell-id = ; - label = "slv-snoc-ddrc-m1"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,bus-dev = <&fab_snoc>; - qcom,slv-rpm-id = ; - }; - - slv_a7ss:slv-a7ss { - cell-id = ; - label = "slv-a7ss"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_snoc>; - qcom,slv-rpm-id = ; - }; - - slv_ocimem:slv-ocimem { - cell-id = ; - label = "slv-ocimem"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,bus-dev = <&fab_snoc>; - qcom,slv-rpm-id = ; - }; - - slv_wss0_cfg:slv-wss0-cfg { - cell-id = ; - label = "slv-wss0-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_snoc>; - qcom,slv-rpm-id = ; - }; - - slv_wss1_cfg:slv-wss1-cfg { - cell-id = ; - label = "slv-wss1-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_snoc>; - qcom,slv-rpm-id = ; - }; - - slv_pcie:slv-pcie { - cell-id = ; - label = "slv-pcie"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,bus-dev = <&fab_snoc>; - qcom,slv-rpm-id = ; - }; - - slv_usb3_cfg:slv-usb3-cfg { - cell-id = ; - label = "slv-usb3-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_snoc>; - qcom,slv-rpm-id = ; - }; - - slv_crypto_cfg:slv-crypto-cfg { - cell-id = ; - label = "slv-crypto-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_snoc>; - qcom,slv-rpm-id = ; - }; - - slv_ess_cfg:slv-ess-cfg { - cell-id = ; - label = "slv-ess-cfg"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_snoc>; - qcom,slv-rpm-id = ; - }; - - slv_qdss_stm:slv-qdss-stm { - cell-id = ; - label = "slv-qdss-stm"; - qcom,buswidth = <4>; - qcom,ap-owned; - qcom,bus-dev = <&fab_snoc>; - qcom,slv-rpm-id = ; - }; - - slv_srvc_snoc:slv-srvc-snoc { - cell-id = ; - label = "slv-srvc-snoc"; - qcom,buswidth = <8>; - qcom,ap-owned; - qcom,bus-dev = <&fab_snoc>; - qcom,slv-rpm-id = ; - }; - }; -}; - -}; diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts deleted file mode 100644 index f5ca3d5c5677..000000000000 --- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts +++ /dev/null @@ -1,322 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include "qcom-ipq4019-bus.dtsi" -#include -#include -#include - -/ { - model = "AVM FRITZ!Box 4040"; - compatible = "avm,fritzbox-4040", "qcom,ipq4019"; - - aliases { - led-boot = &power; - led-failsafe = &flash; - led-running = &power; - led-upgrade = &flash; - }; - - reserved-memory { - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - - tz_apps@87b80000 { - reg = <0x87b80000 0x280000>; - reusable; - }; - - smem@87e00000 { - reg = <0x87e00000 0x080000>; - no-map; - }; - - tz@87e80000 { - reg = <0x87e80000 0x180000>; - no-map; - }; - }; - - soc { - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "ok"; - }; - - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "ok"; - }; - - usb3@8af8800 { - status = "ok"; - }; - - crypto@8e3a000 { - status = "ok"; - }; - - wifi@a000000 { - status = "okay"; - }; - - wifi@a800000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "ok"; - }; - - qca8075: ess-switch@c000000 { - status = "okay"; - - #gpio-cells = <2>; - gpio-controller; - - enable-usb-power { - gpio-hog; - line-name = "enable USB3 power"; - gpios = <7 GPIO_ACTIVE_HIGH>; - output-high; - }; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - wlan { - label = "fritz4040:green:wlan"; - gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>; - }; - - panic: info_red { - label = "fritz4040:red:info"; - gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - wan { - label = "fritz4040:green:wan"; - gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>; - }; - - power: power { - label = "fritz4040:green:power"; - gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>; - }; - - lan { - label = "fritz4040:green:lan"; - gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>; - }; - - flash: info_amber { - label = "fritz4040:amber:info"; - gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&cryptobam { - status = "ok"; -}; - -&blsp_dma { - status = "ok"; -}; - -&spi_0 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "ok"; - cs-gpios = <&tlmm 54 0>; - - mx25l25635f@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - spi-max-frequency = <24000000>; - status = "ok"; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "APPSBLENV"; /* uboot env - empty */ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "urlader"; /* APPSBL */ - reg = <0x000f0000 0x0002dc000>; - read-only; - }; - partition7@11dc00 { - /* make a backup of this partition! */ - label = "urlader_config"; - reg = <0x0011dc00 0x00002400>; - read-only; - }; - partition8@120000 { - label = "tffs1"; - reg = <0x00120000 0x00080000>; - read-only; - }; - partition9@1a0000 { - label = "tffs2"; - reg = <0x001a0000 0x00080000>; - read-only; - }; - partition10@220000 { - label = "uboot"; - reg = <0x00220000 0x00080000>; - read-only; - }; - partition11@2A0000 { - label = "firmware"; - reg = <0x002a0000 0x01c60000>; - }; - partition12@1f00000 { - label = "jffs2"; - reg = <0x01f00000 0x00100000>; - }; - }; - }; -}; - -&usb3_ss_phy { - status = "ok"; -}; - -&usb3_hs_phy { - status = "ok"; -}; - -&usb2_hs_phy { - status = "ok"; -}; diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts deleted file mode 100644 index 53824e3c8d99..000000000000 --- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts +++ /dev/null @@ -1,316 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "GL.iNet GL-B1300"; - compatible = "glinet,gl-b1300", "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - reserved-memory { - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - - apps_bl@87000000 { - reg = <0x87000000 0x400000>; - no-map; - }; - - sbl@87400000 { - reg = <0x87400000 0x100000>; - no-map; - }; - - cnss_debug@87500000 { - reg = <0x87500000 0x600000>; - no-map; - }; - - cpu_context_dump@87b00000 { - reg = <0x87b00000 0x080000>; - no-map; - }; - - tz_apps@87b80000 { - reg = <0x87b80000 0x280000>; - no-map; - }; - - smem@87e00000 { - reg = <0x87e00000 0x080000>; - no-map; - }; - - tz@87e80000 { - reg = <0x87e80000 0x180000>; - no-map; - }; - }; - - soc { - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "ok"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - pinctrl@1000000 { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio54"; - }; - pinconf { - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - }; - - blsp_dma: dma@7884000 { - status = "ok"; - }; - - spi_0: spi@78b5000 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "ok"; - cs-gpios = <&tlmm 54 0>; - }; - - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "ok"; - }; - - cryptobam: dma@8e04000 { - status = "ok"; - }; - - crypto@8e3a000 { - status = "ok"; - }; - - watchdog@b017000 { - status = "ok"; - }; - - usb3_ss_phy: ssphy@9a000 { - status = "ok"; - }; - - usb3_hs_phy: hsphy@a6000 { - status = "ok"; - }; - - usb3: usb3@8af8800 { - status = "ok"; - }; - - usb2_hs_phy: hsphy@a8000 { - status = "ok"; - }; - - usb2: usb2@60f8800 { - status = "ok"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - wifi@a000000 { - status = "okay"; - }; - - wifi@a800000 { - status = "okay"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - power { - label = "gl-b1300:green:power"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - mesh { - label = "gl-b1300:green:mesh"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - wlan { - label = "gl-b1300:green:wlan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&spi_0 { - mx25l25635f@0 { - compatible = "mx25l25635f", "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - MIBIB@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - QSEE@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - CDT@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - DDRPARAMS@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - APPSBLENV@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - APPSBL@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - ART@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - }; - kernel@180000 { - label = "kernel"; - reg = <0x180000 0x400000>; - }; - rootfs@580000 { - label = "rootfs"; - reg = <0x580000 0x1a80000>; - }; - firmware@180000 { - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; \ No newline at end of file diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index c2d72556552f..d41679ff97cb 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -73,21 +73,6 @@ define Device/ZyXELImage IMAGE/mmcblk0p4-kernel.bin := append-kernel endef -define Device/avm_fritzbox-4040 - $(call Device/FitImageLzma) - DEVICE_DTS := qcom-ipq4019-fritz4040 - KERNEL_LOADADDR := 0x80208000 - BLOCKSIZE := 4k - PAGESIZE := 256 - BOARD_NAME := fritz4040 - DEVICE_TITLE := AVM Fritz!Box 4040 - IMAGE_SIZE := 29753344 - IMAGES = sysupgrade.bin - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata - DEVICE_PACKAGES := ipq-wifi-avm_fritzbox-4040 fritz-tffs fritz-caldata u-boot-fritz4040 -endef -TARGET_DEVICES += avm_fritzbox-4040 - define Device/linksys_ea8500 $(call Device/LegacyImage) DEVICE_DTS := qcom-ipq8064-ea8500 @@ -165,66 +150,6 @@ define Device/netgear_r7800 endef TARGET_DEVICES += netgear_r7800 -define Device/glinet_gl-b1300 - DEVICE_TITLE := GL.iNet GL-B1300 - BOARD_NAME := gl-b1300 - DEVICE_DTS := qcom-ipq4019-gl-b1300 - KERNEL_LOADADDR := 0x80208000 - KERNEL_INSTALL := 1 - KERNEL_SIZE := 4096k - IMAGE_SIZE := 26624k - $(call Device/FitImage) - IMAGES := sysupgrade.bin - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata - DEVICE_PACKAGES := ipq-wifi-glinet_gl-b1300 -endef -TARGET_DEVICES += glinet_gl-b1300 - -define Device/openmesh_a42 - $(call Device/FitImageLzma) - DEVICE_DTS := qcom-ipq4019-a42 - KERNEL_LOADADDR := 0x80208000 - BLOCKSIZE := 64k - SUPPORTED_DEVICES := openmesh,a42 - DEVICE_TITLE := OpenMesh A42 - KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE) - IMAGE_SIZE := 15616k - IMAGES = factory.bin sysupgrade.bin - IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42 - IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata - DEVICE_PACKAGES := ath10k-firmware-qca4019 uboot-envtools -endef -TARGET_DEVICES += openmesh_a42 - -define Device/qcom_ap-dk01.1-c1 - DEVICE_TITLE := QCA AP-DK01.1-C1 - BOARD_NAME := ap-dk01.1-c1 - DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1 - KERNEL_LOADADDR := 0x80208000 - KERNEL_INSTALL := 1 - KERNEL_SIZE := 4096k - IMAGE_SIZE := 26624k - $(call Device/FitImage) - IMAGES := sysupgrade.bin - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata - DEVICE_PACKAGES := ath10k-firmware-qca4019 -endef -TARGET_DEVICES += qcom_ap-dk01.1-c1 - -define Device/qcom_ap-dk04.1-c1 - $(call Device/FitImage) - $(call Device/UbiFit) - DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1 - KERNEL_LOADADDR := 0x80208000 - KERNEL_INSTALL := 1 - KERNEL_SIZE := 4048k - BLOCKSIZE := 128k - PAGESIZE := 2048 - BOARD_NAME := ap-dk04.1-c1 - DEVICE_TITLE := QCA AP-DK04.1-C1 -endef -TARGET_DEVICES += qcom_ap-dk04.1-c1 - define Device/qcom_ipq8064-ap148 $(call Device/FitImage) $(call Device/UbiFit) diff --git a/target/linux/ipq806x/patches-4.9/0015-cpufreq-dt-qcom-ipq4019-Add-compat-for-qcom-ipq4019.patch b/target/linux/ipq806x/patches-4.9/0015-cpufreq-dt-qcom-ipq4019-Add-compat-for-qcom-ipq4019.patch deleted file mode 100644 index 06b61a07efd2..000000000000 --- a/target/linux/ipq806x/patches-4.9/0015-cpufreq-dt-qcom-ipq4019-Add-compat-for-qcom-ipq4019.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 5543e93f51d5e23f9b3a7fe11a722c91fc410485 Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Wed, 13 Apr 2016 14:03:14 -0500 -Subject: [PATCH 15/69] cpufreq: dt: qcom: ipq4019: Add compat for qcom ipq4019 - -Instantiate cpufreq-dt-platdev driver for ipq4019 to support changing -CPU frequencies. - -This depends on Viresh Kumar's patches in this series: -http://comments.gmane.org/gmane.linux.power-management.general/73887 - -Signed-off-by: Matthew McClintock ---- - drivers/cpufreq/cpufreq-dt-platdev.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/cpufreq/cpufreq-dt-platdev.c -+++ b/drivers/cpufreq/cpufreq-dt-platdev.c -@@ -35,6 +35,8 @@ static const struct of_device_id machine - - { .compatible = "marvell,berlin", }, - -+ { .compatible = "qcom,ipq4019", }, -+ - { .compatible = "samsung,exynos3250", }, - { .compatible = "samsung,exynos4210", }, - { .compatible = "samsung,exynos4212", }, diff --git a/target/linux/ipq806x/patches-4.9/0016-clk-ipq4019-report-accurate-fixed-clock-rates.patch b/target/linux/ipq806x/patches-4.9/0016-clk-ipq4019-report-accurate-fixed-clock-rates.patch deleted file mode 100644 index be9c4eb1b2f4..000000000000 --- a/target/linux/ipq806x/patches-4.9/0016-clk-ipq4019-report-accurate-fixed-clock-rates.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 5e2df5f44e35d79fff2ab8bbb8a726ad5de78a3e Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Thu, 28 Apr 2016 12:55:08 -0500 -Subject: [PATCH 16/69] clk: ipq4019: report accurate fixed clock rates - -This looks like a copy-and-paste gone wrong, but update all -the fixed clock rates to report the correct values. - -Signed-off-by: Matthew McClintock ---- - drivers/clk/qcom/gcc-ipq4019.c | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq4019.c -+++ b/drivers/clk/qcom/gcc-ipq4019.c -@@ -1327,12 +1327,12 @@ static int gcc_ipq4019_probe(struct plat - { - struct device *dev = &pdev->dev; - -- clk_register_fixed_rate(dev, "fepll125", "xo", 0, 200000000); -- clk_register_fixed_rate(dev, "fepll125dly", "xo", 0, 200000000); -- clk_register_fixed_rate(dev, "fepllwcss2g", "xo", 0, 200000000); -- clk_register_fixed_rate(dev, "fepllwcss5g", "xo", 0, 200000000); -+ clk_register_fixed_rate(dev, "fepll125", "xo", 0, 125000000); -+ clk_register_fixed_rate(dev, "fepll125dly", "xo", 0, 125000000); -+ clk_register_fixed_rate(dev, "fepllwcss2g", "xo", 0, 250000000); -+ clk_register_fixed_rate(dev, "fepllwcss5g", "xo", 0, 250000000); - clk_register_fixed_rate(dev, "fepll200", "xo", 0, 200000000); -- clk_register_fixed_rate(dev, "fepll500", "xo", 0, 200000000); -+ clk_register_fixed_rate(dev, "fepll500", "xo", 0, 500000000); - clk_register_fixed_rate(dev, "ddrpllapss", "xo", 0, 666000000); - - return qcom_cc_probe(pdev, &gcc_ipq4019_desc); diff --git a/target/linux/ipq806x/patches-4.9/0017-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch b/target/linux/ipq806x/patches-4.9/0017-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch deleted file mode 100644 index 7cbd6a4551bf..000000000000 --- a/target/linux/ipq806x/patches-4.9/0017-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 18c3b42575a154343831aec0637aab00e19440e1 Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Thu, 17 Mar 2016 15:01:09 -0500 -Subject: [PATCH 17/69] qcom: ipq4019: add cpu operating points for cpufreq - support - -This adds some operating points for cpu frequeny scaling - -Signed-off-by: Matthew McClintock ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 34 ++++++++++++++++++++++++++-------- - 1 file changed, 26 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -40,14 +40,7 @@ - reg = <0x0>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -- operating-points = < -- /* kHz uV (fixed) */ -- 48000 1100000 -- 200000 1100000 -- 500000 1100000 -- 666000 1100000 -- >; -- clock-latency = <256000>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@1 { -@@ -59,6 +52,7 @@ - reg = <0x1>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@2 { -@@ -70,6 +64,7 @@ - reg = <0x2>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@3 { -@@ -81,6 +76,29 @@ - reg = <0x3>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -+ operating-points-v2 = <&cpu0_opp_table>; -+ }; -+ }; -+ -+ cpu0_opp_table: opp_table0 { -+ compatible = "operating-points-v2"; -+ opp-shared; -+ -+ opp@48000000 { -+ opp-hz = /bits/ 64 <48000000>; -+ clock-latency-ns = <256000>; -+ }; -+ opp@200000000 { -+ opp-hz = /bits/ 64 <200000000>; -+ clock-latency-ns = <256000>; -+ }; -+ opp@500000000 { -+ opp-hz = /bits/ 64 <500000000>; -+ clock-latency-ns = <256000>; -+ }; -+ opp@666000000 { -+ opp-hz = /bits/ 64 <666000000>; -+ clock-latency-ns = <256000>; - }; - }; - diff --git a/target/linux/ipq806x/patches-4.9/0018-qcom-ipq4019-turn-on-DMA-for-i2c.patch b/target/linux/ipq806x/patches-4.9/0018-qcom-ipq4019-turn-on-DMA-for-i2c.patch deleted file mode 100644 index 42bb4a6e3ec3..000000000000 --- a/target/linux/ipq806x/patches-4.9/0018-qcom-ipq4019-turn-on-DMA-for-i2c.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 71f82049dca86bc89b9da07e051e4ed492820233 Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Mon, 28 Mar 2016 11:16:51 -0500 -Subject: [PATCH 18/69] qcom: ipq4019: turn on DMA for i2c - -These are the required nodes for i2c-qup to use DMA - -Signed-off-by: Matthew McClintock ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -179,6 +179,8 @@ - clock-names = "iface", "core"; - #address-cells = <1>; - #size-cells = <0>; -+ dmas = <&blsp_dma 9>, <&blsp_dma 8>; -+ dma-names = "rx", "tx"; - status = "disabled"; - }; - diff --git a/target/linux/ipq806x/patches-4.9/0019-qcom-ipq4019-use-correct-clock-for-i2c-bus-0.patch b/target/linux/ipq806x/patches-4.9/0019-qcom-ipq4019-use-correct-clock-for-i2c-bus-0.patch deleted file mode 100644 index 54ee571cbb7c..000000000000 --- a/target/linux/ipq806x/patches-4.9/0019-qcom-ipq4019-use-correct-clock-for-i2c-bus-0.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 7292bf171cdf2fb48607058f12ddd0d812a87428 Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Fri, 29 Apr 2016 12:48:02 -0500 -Subject: [PATCH 19/69] qcom: ipq4019: use correct clock for i2c bus 0 - -For the record the mapping is as follows: - -QUP0 = SPI QUP1 -QUP1 = SPI QUP2 -QUP2 = I2C QUP1 -QUP3 = I2C QUP2 - -Signed-off-by: Matthew McClintock ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -175,7 +175,7 @@ - reg = <0x78b7000 0x6000>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, -- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; -+ <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; - #address-cells = <1>; - #size-cells = <0>; diff --git a/target/linux/ipq806x/patches-4.9/0020-qcom-ipq4019-enable-DMA-for-spi.patch b/target/linux/ipq806x/patches-4.9/0020-qcom-ipq4019-enable-DMA-for-spi.patch deleted file mode 100644 index c1fa5c7298f6..000000000000 --- a/target/linux/ipq806x/patches-4.9/0020-qcom-ipq4019-enable-DMA-for-spi.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 4593e768393b9589f0a8987eaf57316c214865fe Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Mon, 11 Apr 2016 14:49:12 -0500 -Subject: [PATCH 20/69] qcom: ipq4019: enable DMA for spi - -These are the required nodes for spi-qup to use DMA - -Signed-off-by: Matthew McClintock ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -167,6 +167,8 @@ - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; -+ dmas = <&blsp_dma 5>, <&blsp_dma 4>; -+ dma-names = "rx", "tx"; - status = "disabled"; - }; - diff --git a/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch b/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch deleted file mode 100644 index 8cd3e205d324..000000000000 --- a/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch +++ /dev/null @@ -1,225 +0,0 @@ -From ec3e465ecf3f7dd26f2e22170e4c5f4b9979df5d Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Mon, 21 Mar 2016 15:55:21 -0500 -Subject: [PATCH 26/69] dts: ipq4019: Add support for IPQ4019 DK04 board - -This is pretty similiar to a DK01 but has a bit more IO. Some notable -differences are listed below however they are not in the device tree yet -as we continue adding more support - -- second serial port -- PCIe -- NAND -- SD/EMMC - -Signed-off-by: Matthew McClintock ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 12 +- - arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 21 +++ - arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 163 ++++++++++++++++++++++++ - 4 files changed, 189 insertions(+), 8 deletions(-) - create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts - create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -617,6 +617,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ - qcom-apq8084-ifc6540.dtb \ - qcom-apq8084-mtp.dtb \ - qcom-ipq4019-ap.dk01.1-c1.dtb \ -+ qcom-ipq4019-ap.dk04.1-c1.dtb \ - qcom-ipq8064-ap148.dtb \ - qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts -@@ -0,0 +1,22 @@ -+/* Copyright (c) 2015, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ * -+ */ -+ -+#include "qcom-ipq4019-ap.dk04.1.dtsi" -+ -+/ { -+ model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1"; -+ compatible = "qcom,ap-dk04.1-c1", "qcom,ipq4019"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi -@@ -0,0 +1,163 @@ -+/* Copyright (c) 2015, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ * -+ */ -+ -+#include "qcom-ipq4019.dtsi" -+ -+/ { -+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1"; -+ compatible = "qcom,ipq4019"; -+ -+ clocks { -+ xo: xo { -+ compatible = "fixed-clock"; -+ clock-frequency = <48000000>; -+ #clock-cells = <0>; -+ }; -+ }; -+ -+ soc { -+ timer { -+ compatible = "arm,armv7-timer"; -+ interrupts = <1 2 0xf08>, -+ <1 3 0xf08>, -+ <1 4 0xf08>, -+ <1 1 0xf08>; -+ clock-frequency = <48000000>; -+ }; -+ -+ pinctrl@0x01000000 { -+ serial_0_pins: serial_pinmux { -+ mux { -+ pins = "gpio16", "gpio17"; -+ function = "blsp_uart0"; -+ bias-disable; -+ }; -+ }; -+ -+ serial_1_pins: serial1_pinmux { -+ mux { -+ pins = "gpio8", "gpio9"; -+ function = "blsp_uart1"; -+ bias-disable; -+ }; -+ }; -+ -+ spi_0_pins: spi_0_pinmux { -+ pinmux { -+ function = "blsp_spi0"; -+ pins = "gpio13", "gpio14", "gpio15"; -+ }; -+ pinmux_cs { -+ function = "gpio"; -+ pins = "gpio12"; -+ }; -+ pinconf { -+ pins = "gpio13", "gpio14", "gpio15"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ pinconf_cs { -+ pins = "gpio12"; -+ drive-strength = <2>; -+ bias-disable; -+ output-high; -+ }; -+ }; -+ -+ i2c_0_pins: i2c_0_pinmux { -+ pinmux { -+ function = "blsp_i2c0"; -+ pins = "gpio10", "gpio11"; -+ }; -+ pinconf { -+ pins = "gpio10", "gpio11"; -+ drive-strength = <16>; -+ bias-disable; -+ }; -+ }; -+ }; -+ -+ blsp_dma: dma@7884000 { -+ status = "ok"; -+ }; -+ -+ spi_0: spi@78b5000 { -+ pinctrl-0 = <&spi_0_pins>; -+ pinctrl-names = "default"; -+ status = "ok"; -+ cs-gpios = <&tlmm 12 0>; -+ -+ mx25l25635e@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ reg = <0>; -+ compatible = "mx25l25635e"; -+ spi-max-frequency = <24000000>; -+ }; -+ }; -+ -+ i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */ -+ pinctrl-0 = <&i2c_0_pins>; -+ pinctrl-names = "default"; -+ -+ status = "ok"; -+ }; -+ -+ serial@78af000 { -+ pinctrl-0 = <&serial_0_pins>; -+ pinctrl-names = "default"; -+ status = "ok"; -+ }; -+ -+ serial@78b0000 { -+ pinctrl-0 = <&serial_1_pins>; -+ pinctrl-names = "default"; -+ status = "ok"; -+ }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ status = "ok"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ status = "ok"; -+ }; -+ -+ usb3: usb3@8af8800 { -+ status = "ok"; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ status = "ok"; -+ }; -+ -+ usb2: usb2@60f8800 { -+ status = "ok"; -+ }; -+ -+ cryptobam: dma@8e04000 { -+ status = "ok"; -+ }; -+ -+ crypto@8e3a000 { -+ status = "ok"; -+ }; -+ -+ watchdog@b017000 { -+ status = "ok"; -+ }; -+ }; -+}; diff --git a/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch index 0f3b20ebe7e3..bac7c6da4f4d 100644 --- a/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch +++ b/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch @@ -10,15 +10,9 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -616,9 +616,20 @@ dtb-$(CONFIG_ARCH_QCOM) += \ - qcom-apq8074-dragonboard.dtb \ - qcom-apq8084-ifc6540.dtb \ +@@ -618,6 +618,14 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8084-mtp.dtb \ -+ qcom-ipq4019-a42.dtb \ -+ qcom-ipq4019-gl-b1300.dtb \ qcom-ipq4019-ap.dk01.1-c1.dtb \ - qcom-ipq4019-ap.dk04.1-c1.dtb \ -+ qcom-ipq4019-fritz4040.dtb \ qcom-ipq8064-ap148.dtb \ + qcom-ipq8064-c2600.dtb \ + qcom-ipq8064-d7800.dtb \ diff --git a/target/linux/ipq806x/patches-4.9/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch b/target/linux/ipq806x/patches-4.9/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch deleted file mode 100644 index 40f5e407bafb..000000000000 --- a/target/linux/ipq806x/patches-4.9/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch +++ /dev/null @@ -1,109 +0,0 @@ -From 6a6c067b7ce2b3de4efbafddc134afbea3ddc1a3 Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Fri, 8 Apr 2016 15:26:10 -0500 -Subject: [PATCH] qcom: ipq4019: use v2 of the kpss bringup mechanism - -v1 was the incorrect choice here and sometimes the board -would not come up properly. - -Signed-off-by: Matthew McClintock -Signed-off-by: Christian Lamparter ---- -Changes: - - moved L2-Cache to be a subnode of cpu0 ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 32 ++++++++++++++++++++++++-------- - 1 file changed, 24 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -34,19 +34,27 @@ - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc0>; - qcom,saw = <&saw0>; - reg = <0x0>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; - operating-points-v2 = <&cpu0_opp_table>; -+ -+ L2: l2-cache { -+ compatible = "qcom,arch-cache"; -+ cache-level = <2>; -+ qcom,saw = <&saw_l2>; -+ }; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc1>; - qcom,saw = <&saw1>; - reg = <0x1>; -@@ -58,7 +66,8 @@ - cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc2>; - qcom,saw = <&saw2>; - reg = <0x2>; -@@ -70,7 +79,8 @@ - cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc3>; - qcom,saw = <&saw3>; - reg = <0x3>; -@@ -212,22 +222,22 @@ - }; - - acc0: clock-controller@b088000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; - }; - - acc1: clock-controller@b098000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; - }; - - acc2: clock-controller@b0a8000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; - }; - - acc3: clock-controller@b0b8000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; - }; - -@@ -255,6 +265,12 @@ - regulator; - }; - -+ saw_l2: regulator@b012000 { -+ compatible = "qcom,saw2"; -+ reg = <0xb012000 0x1000>; -+ regulator; -+ }; -+ - serial@78af000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78af000 0x200>; diff --git a/target/linux/ipq806x/patches-4.9/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch b/target/linux/ipq806x/patches-4.9/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch deleted file mode 100644 index 3c3fc98a2d8b..000000000000 --- a/target/linux/ipq806x/patches-4.9/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch +++ /dev/null @@ -1,130 +0,0 @@ -From ea5f4d6f4716f3a0bb4fc3614b7a0e8c0df1cb81 Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Thu, 17 Mar 2016 16:22:28 -0500 -Subject: [PATCH] qcom: ipq4019: add USB nodes to ipq4019 SoC device tree - -This adds the SoC nodes to the ipq4019 device tree and -enable it for the DK01.1 board. - -Signed-off-by: Matthew McClintock -Signed-off-by: Christian Lamparter ---- -Changes: - - replaced space with tab - - added sleep and mock_utmi clocks - - added registers for usb2 and usb3 parent node - - changed compatible to qca,ipa4019-dwc3 - - updated usb2 and usb3 names - (included the reg - in case they become necessary later) ---- - arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++ - arch/arm/boot/dts/qcom-ipq4019.dtsi | 71 +++++++++++++++++++++++++++ - 2 files changed, 91 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -108,5 +108,25 @@ - watchdog@b017000 { - status = "ok"; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ status = "ok"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ status = "ok"; -+ }; -+ -+ usb3: usb3@8af8800 { -+ status = "ok"; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ status = "ok"; -+ }; -+ -+ usb2: usb2@60f8800 { -+ status = "ok"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -307,5 +307,76 @@ - compatible = "qcom,pshold"; - reg = <0x4ab000 0x4>; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ compatible = "qca,uni-ssphy"; -+ reg = <0x9a000 0x800>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_UNIPHY_PHY_ARES>; -+ reset-names = "por_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ compatible = "qca,baldur-usb3-hsphy"; -+ reg = <0xa6000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3@8af8800 { -+ compatible = "qca,ipq4019-dwc3"; -+ reg = <0x8af8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB3_MASTER_CLK>, -+ <&gcc GCC_USB3_SLEEP_CLK>, -+ <&gcc GCC_USB3_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@8a00000 { -+ compatible = "snps,dwc3"; -+ reg = <0x8a00000 0xf8000>; -+ interrupts = <0 132 0>; -+ usb-phy = <&usb3_hs_phy>, <&usb3_ss_phy>; -+ phy-names = "usb2-phy", "usb3-phy"; -+ dr_mode = "host"; -+ }; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ compatible = "qca,baldur-usb2-hsphy"; -+ reg = <0xa8000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb2@60f8800 { -+ compatible = "qca,ipq4019-dwc3"; -+ reg = <0x60f8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB2_MASTER_CLK>, -+ <&gcc GCC_USB2_SLEEP_CLK>, -+ <&gcc GCC_USB2_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@6000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x6000000 0xf8000>; -+ interrupts = <0 136 0>; -+ usb-phy = <&usb2_hs_phy>; -+ phy-names = "usb2-phy"; -+ dr_mode = "host"; -+ }; -+ }; - }; - }; diff --git a/target/linux/ipq806x/patches-4.9/307-ARM-qcom-Add-IPQ4019-SoC-support.patch b/target/linux/ipq806x/patches-4.9/307-ARM-qcom-Add-IPQ4019-SoC-support.patch deleted file mode 100644 index 4cbcc0aea203..000000000000 --- a/target/linux/ipq806x/patches-4.9/307-ARM-qcom-Add-IPQ4019-SoC-support.patch +++ /dev/null @@ -1,35 +0,0 @@ -From e7748d641ae37081e2034869491f1629461ae13c Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sat, 19 Nov 2016 00:58:18 +0100 -Subject: [PATCH] ARM: qcom: Add IPQ4019 SoC support - -Add support for the Qualcomm Atheros IPQ4019 SoC. - -Signed-off-by: Christian Lamparter ---- - arch/arm/Makefile | 1 + - arch/arm/mach-qcom/Kconfig | 5 +++++ - 2 files changed, 6 insertions(+) - ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -147,6 +147,7 @@ textofs-$(CONFIG_SA1111) := 0x00208000 - endif - textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 - textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 -+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000 - textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 - - # Machine directory name. This list is sorted alphanumerically ---- a/arch/arm/mach-qcom/Kconfig -+++ b/arch/arm/mach-qcom/Kconfig -@@ -28,4 +28,9 @@ config ARCH_MDM9615 - bool "Enable support for MDM9615" - select CLKSRC_QCOM - -+config ARCH_IPQ40XX -+ bool "Enable support for IPQ40XX" -+ select CLKSRC_QCOM -+ select HAVE_ARM_ARCH_TIMER -+ - endif diff --git a/target/linux/ipq806x/patches-4.9/308-dts-ipq4019-add-both-IPQ4019-wifi-block-definitions.patch b/target/linux/ipq806x/patches-4.9/308-dts-ipq4019-add-both-IPQ4019-wifi-block-definitions.patch deleted file mode 100644 index d12ca4befe8b..000000000000 --- a/target/linux/ipq806x/patches-4.9/308-dts-ipq4019-add-both-IPQ4019-wifi-block-definitions.patch +++ /dev/null @@ -1,105 +0,0 @@ -From 6091a49b0b06bf838fed80498c4f5f40d0fbd447 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sat, 19 Nov 2016 01:22:46 +0100 -Subject: [PATCH] dts: ipq4019: add both IPQ4019 wifi block definitions - -The IPQ4019 has two ath10k blocks on the AHB. Both wifi's -are already supported by ath10k. - -Signed-off-by: Christian Lamparter ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 84 +++++++++++++++++++++++++++++++++++++ - 1 file changed, 84 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -378,5 +378,89 @@ - dr_mode = "host"; - }; - }; -+ -+ wifi0: wifi@a000000 { -+ compatible = "qcom,ipq4019-wifi"; -+ reg = <0xa000000 0x200000>; -+ resets = <&gcc WIFI0_CPU_INIT_RESET -+ &gcc WIFI0_RADIO_SRIF_RESET -+ &gcc WIFI0_RADIO_WARM_RESET -+ &gcc WIFI0_RADIO_COLD_RESET -+ &gcc WIFI0_CORE_WARM_RESET -+ &gcc WIFI0_CORE_COLD_RESET>; -+ reset-names = "wifi_cpu_init", "wifi_radio_srif", -+ "wifi_radio_warm", "wifi_radio_cold", -+ "wifi_core_warm", "wifi_core_cold"; -+ clocks = <&gcc GCC_WCSS2G_CLK -+ &gcc GCC_WCSS2G_REF_CLK -+ &gcc GCC_WCSS2G_RTC_CLK>; -+ clock-names = "wifi_wcss_cmd", "wifi_wcss_ref", -+ "wifi_wcss_rtc"; -+ interrupts = <0 32 IRQ_TYPE_EDGE_RISING -+ 0 33 IRQ_TYPE_EDGE_RISING -+ 0 34 IRQ_TYPE_EDGE_RISING -+ 0 35 IRQ_TYPE_EDGE_RISING -+ 0 36 IRQ_TYPE_EDGE_RISING -+ 0 37 IRQ_TYPE_EDGE_RISING -+ 0 38 IRQ_TYPE_EDGE_RISING -+ 0 39 IRQ_TYPE_EDGE_RISING -+ 0 40 IRQ_TYPE_EDGE_RISING -+ 0 41 IRQ_TYPE_EDGE_RISING -+ 0 42 IRQ_TYPE_EDGE_RISING -+ 0 43 IRQ_TYPE_EDGE_RISING -+ 0 44 IRQ_TYPE_EDGE_RISING -+ 0 45 IRQ_TYPE_EDGE_RISING -+ 0 46 IRQ_TYPE_EDGE_RISING -+ 0 47 IRQ_TYPE_EDGE_RISING -+ 0 168 IRQ_TYPE_NONE>; -+ interrupt-names = "msi0", "msi1", "msi2", "msi3", -+ "msi4", "msi5", "msi6", "msi7", -+ "msi8", "msi9", "msi10", "msi11", -+ "msi12", "msi13", "msi14", "msi15", -+ "legacy"; -+ status = "disabled"; -+ }; -+ -+ wifi1: wifi@a800000 { -+ compatible = "qcom,ipq4019-wifi"; -+ reg = <0xa800000 0x200000>; -+ resets = <&gcc WIFI1_CPU_INIT_RESET -+ &gcc WIFI1_RADIO_SRIF_RESET -+ &gcc WIFI1_RADIO_WARM_RESET -+ &gcc WIFI1_RADIO_COLD_RESET -+ &gcc WIFI1_CORE_WARM_RESET -+ &gcc WIFI1_CORE_COLD_RESET>; -+ reset-names = "wifi_cpu_init", "wifi_radio_srif", -+ "wifi_radio_warm", "wifi_radio_cold", -+ "wifi_core_warm", "wifi_core_cold"; -+ clocks = <&gcc GCC_WCSS5G_CLK -+ &gcc GCC_WCSS5G_REF_CLK -+ &gcc GCC_WCSS5G_RTC_CLK>; -+ clock-names = "wifi_wcss_cmd", "wifi_wcss_ref", -+ "wifi_wcss_rtc"; -+ interrupts = <0 48 IRQ_TYPE_EDGE_RISING -+ 0 49 IRQ_TYPE_EDGE_RISING -+ 0 50 IRQ_TYPE_EDGE_RISING -+ 0 51 IRQ_TYPE_EDGE_RISING -+ 0 52 IRQ_TYPE_EDGE_RISING -+ 0 53 IRQ_TYPE_EDGE_RISING -+ 0 54 IRQ_TYPE_EDGE_RISING -+ 0 55 IRQ_TYPE_EDGE_RISING -+ 0 56 IRQ_TYPE_EDGE_RISING -+ 0 57 IRQ_TYPE_EDGE_RISING -+ 0 58 IRQ_TYPE_EDGE_RISING -+ 0 59 IRQ_TYPE_EDGE_RISING -+ 0 60 IRQ_TYPE_EDGE_RISING -+ 0 61 IRQ_TYPE_EDGE_RISING -+ 0 62 IRQ_TYPE_EDGE_RISING -+ 0 63 IRQ_TYPE_EDGE_RISING -+ 0 169 IRQ_TYPE_NONE>; -+ interrupt-names = "msi0", "msi1", "msi2", "msi3", -+ "msi4", "msi5", "msi6", "msi7", -+ "msi8", "msi9", "msi10", "msi11", -+ "msi12", "msi13", "msi14", "msi15", -+ "legacy"; -+ status = "disabled"; -+ }; - }; - }; diff --git a/target/linux/ipq806x/patches-4.9/309-dts-ipq4019-add-pseudo-random-number-generator.patch b/target/linux/ipq806x/patches-4.9/309-dts-ipq4019-add-pseudo-random-number-generator.patch deleted file mode 100644 index abcbb6ee553e..000000000000 --- a/target/linux/ipq806x/patches-4.9/309-dts-ipq4019-add-pseudo-random-number-generator.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 26fa6fdc627b523277c7a79907233596b2f8a3ef Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sat, 19 Nov 2016 03:29:04 +0100 -Subject: [PATCH] dts: ipq4019: add pseudo random number generator - -This architecture has a pseudo random number generator -supported by the existing "qcom,prng" binding. - -Signed-off-by: Christian Lamparter ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -271,6 +271,13 @@ - regulator; - }; - -+ rng@22000 { -+ compatible = "qcom,prng"; -+ reg = <0x22000 0x140>; -+ clocks = <&gcc GCC_PRNG_AHB_CLK>; -+ clock-names = "core"; -+ }; -+ - serial@78af000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78af000 0x200>; diff --git a/target/linux/ipq806x/patches-4.9/605-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch b/target/linux/ipq806x/patches-4.9/605-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch deleted file mode 100644 index d2721875a225..000000000000 --- a/target/linux/ipq806x/patches-4.9/605-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 7c129254adb1093d10a62ed7bf7b956fcc6ffe34 Mon Sep 17 00:00:00 2001 -From: Rakesh Nair -Date: Wed, 20 Jul 2016 15:02:01 +0530 -Subject: [PATCH] net: IPQ4019 needs rfs/vlan_tag callbacks in - netdev_ops - -Add callback support to get default vlan tag and register -receive flow steering filter. - -Used by IPQ4019 ess-edma driver. - -BUG=chrome-os-partner:33096 -TEST=none - -Change-Id: I266070e4a0fbe4a0d9966fe79a71e50ec4f26c75 -Signed-off-by: Rakesh Nair -Reviewed-on: https://chromium-review.googlesource.com/362203 -Commit-Ready: Grant Grundler -Tested-by: Grant Grundler -Reviewed-by: Grant Grundler ---- - include/linux/netdevice.h | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/include/linux/netdevice.h -+++ b/include/linux/netdevice.h -@@ -725,6 +725,16 @@ struct xps_map { - #define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \ - - sizeof(struct xps_map)) / sizeof(u16)) - -+#ifdef CONFIG_RFS_ACCEL -+typedef int (*set_rfs_filter_callback_t)(struct net_device *dev, -+ __be32 src, -+ __be32 dst, -+ __be16 sport, -+ __be16 dport, -+ u8 proto, -+ u16 rxq_index, -+ u32 action); -+#endif - /* - * This structure holds all XPS maps for device. Maps are indexed by CPU. - */ -@@ -1251,6 +1261,9 @@ struct net_device_ops { - const struct sk_buff *skb, - u16 rxq_index, - u32 flow_id); -+ int (*ndo_register_rfs_filter)(struct net_device *dev, -+ set_rfs_filter_callback_t set_filter); -+ int (*ndo_get_default_vlan_tag)(struct net_device *net); - #endif - int (*ndo_add_slave)(struct net_device *dev, - struct net_device *slave_dev); diff --git a/target/linux/ipq806x/patches-4.9/700-net-add-qualcomm-mdio-and-phy.patch b/target/linux/ipq806x/patches-4.9/700-net-add-qualcomm-mdio-and-phy.patch deleted file mode 100644 index 003524312ca5..000000000000 --- a/target/linux/ipq806x/patches-4.9/700-net-add-qualcomm-mdio-and-phy.patch +++ /dev/null @@ -1,2690 +0,0 @@ -From 5a71a2005a2e1e6bbe36f00386c495ad6626beb2 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Thu, 19 Jan 2017 01:59:43 +0100 -Subject: [PATCH 30/38] NET: add qualcomm mdio and PHY - ---- - drivers/net/phy/Kconfig | 14 ++++++++++++++ - drivers/net/phy/Makefile | 2 ++ - 2 files changed, 16 insertions(+) - ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -408,6 +408,20 @@ config XILINX_GMII2RGMII - the Reduced Gigabit Media Independent Interface(RGMII) between - Ethernet physical media devices and the Gigabit Ethernet controller. - -+config MDIO_IPQ40XX -+ tristate "Qualcomm Atheros ipq40xx MDIO interface" -+ depends on HAS_IOMEM && OF -+ ---help--- -+ This driver supports the MDIO interface found in Qualcomm -+ Atheros ipq40xx Soc chip. -+ -+config AR40XX_PHY -+ tristate "Driver for Qualcomm Atheros IPQ40XX switches" -+ depends on HAS_IOMEM && OF -+ select SWCONFIG -+ ---help--- -+ This is the driver for Qualcomm Atheros IPQ40XX ESS switches. -+ - endif # PHYLIB - - config MICREL_KS8995MA ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -32,6 +32,7 @@ obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += md - obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o - obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o - obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o -+obj-$(CONFIG_MDIO_IPQ40XX) += mdio-ipq40xx.o - obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o - obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o - obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o -@@ -40,6 +41,7 @@ obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o - - obj-$(CONFIG_AMD_PHY) += amd.o - obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o -+obj-$(CONFIG_AR40XX_PHY) += ar40xx.o - obj-$(CONFIG_AT803X_PHY) += at803x.o - obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o - obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o ---- /dev/null -+++ b/drivers/net/phy/ar40xx.c -@@ -0,0 +1,2090 @@ -+/* -+ * Copyright (c) 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "ar40xx.h" -+ -+static struct ar40xx_priv *ar40xx_priv; -+ -+#define MIB_DESC(_s , _o, _n) \ -+ { \ -+ .size = (_s), \ -+ .offset = (_o), \ -+ .name = (_n), \ -+ } -+ -+static const struct ar40xx_mib_desc ar40xx_mibs[] = { -+ MIB_DESC(1, AR40XX_STATS_RXBROAD, "RxBroad"), -+ MIB_DESC(1, AR40XX_STATS_RXPAUSE, "RxPause"), -+ MIB_DESC(1, AR40XX_STATS_RXMULTI, "RxMulti"), -+ MIB_DESC(1, AR40XX_STATS_RXFCSERR, "RxFcsErr"), -+ MIB_DESC(1, AR40XX_STATS_RXALIGNERR, "RxAlignErr"), -+ MIB_DESC(1, AR40XX_STATS_RXRUNT, "RxRunt"), -+ MIB_DESC(1, AR40XX_STATS_RXFRAGMENT, "RxFragment"), -+ MIB_DESC(1, AR40XX_STATS_RX64BYTE, "Rx64Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX128BYTE, "Rx128Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX256BYTE, "Rx256Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX512BYTE, "Rx512Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX1024BYTE, "Rx1024Byte"), -+ MIB_DESC(1, AR40XX_STATS_RX1518BYTE, "Rx1518Byte"), -+ MIB_DESC(1, AR40XX_STATS_RXMAXBYTE, "RxMaxByte"), -+ MIB_DESC(1, AR40XX_STATS_RXTOOLONG, "RxTooLong"), -+ MIB_DESC(2, AR40XX_STATS_RXGOODBYTE, "RxGoodByte"), -+ MIB_DESC(2, AR40XX_STATS_RXBADBYTE, "RxBadByte"), -+ MIB_DESC(1, AR40XX_STATS_RXOVERFLOW, "RxOverFlow"), -+ MIB_DESC(1, AR40XX_STATS_FILTERED, "Filtered"), -+ MIB_DESC(1, AR40XX_STATS_TXBROAD, "TxBroad"), -+ MIB_DESC(1, AR40XX_STATS_TXPAUSE, "TxPause"), -+ MIB_DESC(1, AR40XX_STATS_TXMULTI, "TxMulti"), -+ MIB_DESC(1, AR40XX_STATS_TXUNDERRUN, "TxUnderRun"), -+ MIB_DESC(1, AR40XX_STATS_TX64BYTE, "Tx64Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX128BYTE, "Tx128Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX256BYTE, "Tx256Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX512BYTE, "Tx512Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX1024BYTE, "Tx1024Byte"), -+ MIB_DESC(1, AR40XX_STATS_TX1518BYTE, "Tx1518Byte"), -+ MIB_DESC(1, AR40XX_STATS_TXMAXBYTE, "TxMaxByte"), -+ MIB_DESC(1, AR40XX_STATS_TXOVERSIZE, "TxOverSize"), -+ MIB_DESC(2, AR40XX_STATS_TXBYTE, "TxByte"), -+ MIB_DESC(1, AR40XX_STATS_TXCOLLISION, "TxCollision"), -+ MIB_DESC(1, AR40XX_STATS_TXABORTCOL, "TxAbortCol"), -+ MIB_DESC(1, AR40XX_STATS_TXMULTICOL, "TxMultiCol"), -+ MIB_DESC(1, AR40XX_STATS_TXSINGLECOL, "TxSingleCol"), -+ MIB_DESC(1, AR40XX_STATS_TXEXCDEFER, "TxExcDefer"), -+ MIB_DESC(1, AR40XX_STATS_TXDEFER, "TxDefer"), -+ MIB_DESC(1, AR40XX_STATS_TXLATECOL, "TxLateCol"), -+}; -+ -+static u32 -+ar40xx_read(struct ar40xx_priv *priv, int reg) -+{ -+ return readl(priv->hw_addr + reg); -+} -+ -+static u32 -+ar40xx_psgmii_read(struct ar40xx_priv *priv, int reg) -+{ -+ return readl(priv->psgmii_hw_addr + reg); -+} -+ -+static void -+ar40xx_write(struct ar40xx_priv *priv, int reg, u32 val) -+{ -+ writel(val, priv->hw_addr + reg); -+} -+ -+static u32 -+ar40xx_rmw(struct ar40xx_priv *priv, int reg, u32 mask, u32 val) -+{ -+ u32 ret; -+ -+ ret = ar40xx_read(priv, reg); -+ ret &= ~mask; -+ ret |= val; -+ ar40xx_write(priv, reg, ret); -+ return ret; -+} -+ -+static void -+ar40xx_psgmii_write(struct ar40xx_priv *priv, int reg, u32 val) -+{ -+ writel(val, priv->psgmii_hw_addr + reg); -+} -+ -+static void -+ar40xx_phy_dbg_write(struct ar40xx_priv *priv, int phy_addr, -+ u16 dbg_addr, u16 dbg_data) -+{ -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mutex_lock(&bus->mdio_lock); -+ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr); -+ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA, dbg_data); -+ mutex_unlock(&bus->mdio_lock); -+} -+ -+static void -+ar40xx_phy_dbg_read(struct ar40xx_priv *priv, int phy_addr, -+ u16 dbg_addr, u16 *dbg_data) -+{ -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mutex_lock(&bus->mdio_lock); -+ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr); -+ *dbg_data = bus->read(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA); -+ mutex_unlock(&bus->mdio_lock); -+} -+ -+static void -+ar40xx_phy_mmd_write(struct ar40xx_priv *priv, u32 phy_id, -+ u16 mmd_num, u16 reg_id, u16 reg_val) -+{ -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mutex_lock(&bus->mdio_lock); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_ADDR, mmd_num); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_DATA, reg_id); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_ADDR, -+ 0x4000 | mmd_num); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_DATA, reg_val); -+ mutex_unlock(&bus->mdio_lock); -+} -+ -+static u16 -+ar40xx_phy_mmd_read(struct ar40xx_priv *priv, u32 phy_id, -+ u16 mmd_num, u16 reg_id) -+{ -+ u16 value; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mutex_lock(&bus->mdio_lock); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_ADDR, mmd_num); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_DATA, reg_id); -+ bus->write(bus, phy_id, -+ AR40XX_MII_ATH_MMD_ADDR, -+ 0x4000 | mmd_num); -+ value = bus->read(bus, phy_id, AR40XX_MII_ATH_MMD_DATA); -+ mutex_unlock(&bus->mdio_lock); -+ return value; -+} -+ -+/* Start of swconfig support */ -+ -+static void -+ar40xx_phy_poll_reset(struct ar40xx_priv *priv) -+{ -+ u32 i, in_reset, retries = 500; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ /* Assume RESET was recently issued to some or all of the phys */ -+ in_reset = GENMASK(AR40XX_NUM_PHYS - 1, 0); -+ -+ while (retries--) { -+ /* 1ms should be plenty of time. -+ * 802.3 spec allows for a max wait time of 500ms -+ */ -+ usleep_range(1000, 2000); -+ -+ for (i = 0; i < AR40XX_NUM_PHYS; i++) { -+ int val; -+ -+ /* skip devices which have completed reset */ -+ if (!(in_reset & BIT(i))) -+ continue; -+ -+ val = mdiobus_read(bus, i, MII_BMCR); -+ if (val < 0) -+ continue; -+ -+ /* mark when phy is no longer in reset state */ -+ if (!(val & BMCR_RESET)) -+ in_reset &= ~BIT(i); -+ } -+ -+ if (!in_reset) -+ return; -+ } -+ -+ dev_warn(&bus->dev, "Failed to reset all phys! (in_reset: 0x%x)\n", -+ in_reset); -+} -+ -+static void -+ar40xx_phy_init(struct ar40xx_priv *priv) -+{ -+ int i; -+ struct mii_bus *bus; -+ u16 val; -+ -+ bus = priv->mii_bus; -+ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) { -+ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val); -+ val &= ~AR40XX_PHY_MANU_CTRL_EN; -+ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val); -+ mdiobus_write(bus, i, -+ MII_ADVERTISE, ADVERTISE_ALL | -+ ADVERTISE_PAUSE_CAP | -+ ADVERTISE_PAUSE_ASYM); -+ mdiobus_write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL); -+ mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); -+ } -+ -+ ar40xx_phy_poll_reset(priv); -+} -+ -+static void -+ar40xx_port_phy_linkdown(struct ar40xx_priv *priv) -+{ -+ struct mii_bus *bus; -+ int i; -+ u16 val; -+ -+ bus = priv->mii_bus; -+ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) { -+ mdiobus_write(bus, i, MII_CTRL1000, 0); -+ mdiobus_write(bus, i, MII_ADVERTISE, 0); -+ mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE); -+ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val); -+ val |= AR40XX_PHY_MANU_CTRL_EN; -+ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val); -+ /* disable transmit */ -+ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_2, &val); -+ val &= 0xf00f; -+ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_2, val); -+ } -+} -+ -+static void -+ar40xx_set_mirror_regs(struct ar40xx_priv *priv) -+{ -+ int port; -+ -+ /* reset all mirror registers */ -+ ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0, -+ AR40XX_FWD_CTRL0_MIRROR_PORT, -+ (0xF << AR40XX_FWD_CTRL0_MIRROR_PORT_S)); -+ for (port = 0; port < AR40XX_NUM_PORTS; port++) { -+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(port), -+ AR40XX_PORT_LOOKUP_ING_MIRROR_EN, 0); -+ -+ ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(port), -+ AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN, 0); -+ } -+ -+ /* now enable mirroring if necessary */ -+ if (priv->source_port >= AR40XX_NUM_PORTS || -+ priv->monitor_port >= AR40XX_NUM_PORTS || -+ priv->source_port == priv->monitor_port) { -+ return; -+ } -+ -+ ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0, -+ AR40XX_FWD_CTRL0_MIRROR_PORT, -+ (priv->monitor_port << AR40XX_FWD_CTRL0_MIRROR_PORT_S)); -+ -+ if (priv->mirror_rx) -+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(priv->source_port), 0, -+ AR40XX_PORT_LOOKUP_ING_MIRROR_EN); -+ -+ if (priv->mirror_tx) -+ ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(priv->source_port), -+ 0, AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN); -+} -+ -+static int -+ar40xx_sw_get_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ u8 ports = priv->vlan_table[val->port_vlan]; -+ int i; -+ -+ val->len = 0; -+ for (i = 0; i < dev->ports; i++) { -+ struct switch_port *p; -+ -+ if (!(ports & BIT(i))) -+ continue; -+ -+ p = &val->value.ports[val->len++]; -+ p->id = i; -+ if ((priv->vlan_tagged & BIT(i)) || -+ (priv->pvid[i] != val->port_vlan)) -+ p->flags = BIT(SWITCH_PORT_FLAG_TAGGED); -+ else -+ p->flags = 0; -+ } -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ u8 *vt = &priv->vlan_table[val->port_vlan]; -+ int i; -+ -+ *vt = 0; -+ for (i = 0; i < val->len; i++) { -+ struct switch_port *p = &val->value.ports[i]; -+ -+ if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED)) { -+ if (val->port_vlan == priv->pvid[p->id]) -+ priv->vlan_tagged |= BIT(p->id); -+ } else { -+ priv->vlan_tagged &= ~BIT(p->id); -+ priv->pvid[p->id] = val->port_vlan; -+ } -+ -+ *vt |= BIT(p->id); -+ } -+ return 0; -+} -+ -+static int -+ar40xx_reg_wait(struct ar40xx_priv *priv, u32 reg, u32 mask, u32 val, -+ unsigned timeout) -+{ -+ int i; -+ -+ for (i = 0; i < timeout; i++) { -+ u32 t; -+ -+ t = ar40xx_read(priv, reg); -+ if ((t & mask) == val) -+ return 0; -+ -+ usleep_range(1000, 2000); -+ } -+ -+ return -ETIMEDOUT; -+} -+ -+static int -+ar40xx_mib_op(struct ar40xx_priv *priv, u32 op) -+{ -+ int ret; -+ -+ lockdep_assert_held(&priv->mib_lock); -+ -+ /* Capture the hardware statistics for all ports */ -+ ar40xx_rmw(priv, AR40XX_REG_MIB_FUNC, -+ AR40XX_MIB_FUNC, (op << AR40XX_MIB_FUNC_S)); -+ -+ /* Wait for the capturing to complete. */ -+ ret = ar40xx_reg_wait(priv, AR40XX_REG_MIB_FUNC, -+ AR40XX_MIB_BUSY, 0, 10); -+ -+ return ret; -+} -+ -+static void -+ar40xx_mib_fetch_port_stat(struct ar40xx_priv *priv, int port, bool flush) -+{ -+ unsigned int base; -+ u64 *mib_stats; -+ int i; -+ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs); -+ -+ WARN_ON(port >= priv->dev.ports); -+ -+ lockdep_assert_held(&priv->mib_lock); -+ -+ base = AR40XX_REG_PORT_STATS_START + -+ AR40XX_REG_PORT_STATS_LEN * port; -+ -+ mib_stats = &priv->mib_stats[port * num_mibs]; -+ if (flush) { -+ u32 len; -+ -+ len = num_mibs * sizeof(*mib_stats); -+ memset(mib_stats, 0, len); -+ return; -+ } -+ for (i = 0; i < num_mibs; i++) { -+ const struct ar40xx_mib_desc *mib; -+ u64 t; -+ -+ mib = &ar40xx_mibs[i]; -+ t = ar40xx_read(priv, base + mib->offset); -+ if (mib->size == 2) { -+ u64 hi; -+ -+ hi = ar40xx_read(priv, base + mib->offset + 4); -+ t |= hi << 32; -+ } -+ -+ mib_stats[i] += t; -+ } -+} -+ -+static int -+ar40xx_mib_capture(struct ar40xx_priv *priv) -+{ -+ return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_CAPTURE); -+} -+ -+static int -+ar40xx_mib_flush(struct ar40xx_priv *priv) -+{ -+ return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_FLUSH); -+} -+ -+static int -+ar40xx_sw_set_reset_mibs(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ unsigned int len; -+ int ret; -+ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs); -+ -+ mutex_lock(&priv->mib_lock); -+ -+ len = priv->dev.ports * num_mibs * sizeof(*priv->mib_stats); -+ memset(priv->mib_stats, 0, len); -+ ret = ar40xx_mib_flush(priv); -+ -+ mutex_unlock(&priv->mib_lock); -+ return ret; -+} -+ -+static int -+ar40xx_sw_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ priv->vlan = !!val->value.i; -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ val->value.i = priv->vlan; -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_mirror_rx_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ priv->mirror_rx = !!val->value.i; -+ ar40xx_set_mirror_regs(priv); -+ mutex_unlock(&priv->reg_mutex); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_mirror_rx_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ val->value.i = priv->mirror_rx; -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_mirror_tx_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ priv->mirror_tx = !!val->value.i; -+ ar40xx_set_mirror_regs(priv); -+ mutex_unlock(&priv->reg_mutex); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_mirror_tx_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ val->value.i = priv->mirror_tx; -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_mirror_monitor_port(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ priv->monitor_port = val->value.i; -+ ar40xx_set_mirror_regs(priv); -+ mutex_unlock(&priv->reg_mutex); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_mirror_monitor_port(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ val->value.i = priv->monitor_port; -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_mirror_source_port(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ priv->source_port = val->value.i; -+ ar40xx_set_mirror_regs(priv); -+ mutex_unlock(&priv->reg_mutex); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_mirror_source_port(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ mutex_lock(&priv->reg_mutex); -+ val->value.i = priv->source_port; -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_linkdown(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ if (val->value.i == 1) -+ ar40xx_port_phy_linkdown(priv); -+ else -+ ar40xx_phy_init(priv); -+ -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_port_reset_mib(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ int port; -+ int ret; -+ -+ port = val->port_vlan; -+ if (port >= dev->ports) -+ return -EINVAL; -+ -+ mutex_lock(&priv->mib_lock); -+ ret = ar40xx_mib_capture(priv); -+ if (ret) -+ goto unlock; -+ -+ ar40xx_mib_fetch_port_stat(priv, port, true); -+ -+unlock: -+ mutex_unlock(&priv->mib_lock); -+ return ret; -+} -+ -+static int -+ar40xx_sw_get_port_mib(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ u64 *mib_stats; -+ int port; -+ int ret; -+ char *buf = priv->buf; -+ int i, len = 0; -+ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs); -+ -+ port = val->port_vlan; -+ if (port >= dev->ports) -+ return -EINVAL; -+ -+ mutex_lock(&priv->mib_lock); -+ ret = ar40xx_mib_capture(priv); -+ if (ret) -+ goto unlock; -+ -+ ar40xx_mib_fetch_port_stat(priv, port, false); -+ -+ len += snprintf(buf + len, sizeof(priv->buf) - len, -+ "Port %d MIB counters\n", -+ port); -+ -+ mib_stats = &priv->mib_stats[port * num_mibs]; -+ for (i = 0; i < num_mibs; i++) -+ len += snprintf(buf + len, sizeof(priv->buf) - len, -+ "%-12s: %llu\n", -+ ar40xx_mibs[i].name, -+ mib_stats[i]); -+ -+ val->value.s = buf; -+ val->len = len; -+ -+unlock: -+ mutex_unlock(&priv->mib_lock); -+ return ret; -+} -+ -+static int -+ar40xx_sw_set_vid(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ priv->vlan_id[val->port_vlan] = val->value.i; -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_vid(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ val->value.i = priv->vlan_id[val->port_vlan]; -+ return 0; -+} -+ -+static int -+ar40xx_sw_get_pvid(struct switch_dev *dev, int port, int *vlan) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ *vlan = priv->pvid[port]; -+ return 0; -+} -+ -+static int -+ar40xx_sw_set_pvid(struct switch_dev *dev, int port, int vlan) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ /* make sure no invalid PVIDs get set */ -+ if (vlan >= dev->vlans) -+ return -EINVAL; -+ -+ priv->pvid[port] = vlan; -+ return 0; -+} -+ -+static void -+ar40xx_read_port_link(struct ar40xx_priv *priv, int port, -+ struct switch_port_link *link) -+{ -+ u32 status; -+ u32 speed; -+ -+ memset(link, 0, sizeof(*link)); -+ -+ status = ar40xx_read(priv, AR40XX_REG_PORT_STATUS(port)); -+ -+ link->aneg = !!(status & AR40XX_PORT_AUTO_LINK_EN); -+ if (link->aneg || (port != AR40XX_PORT_CPU)) -+ link->link = !!(status & AR40XX_PORT_STATUS_LINK_UP); -+ else -+ link->link = true; -+ -+ if (!link->link) -+ return; -+ -+ link->duplex = !!(status & AR40XX_PORT_DUPLEX); -+ link->tx_flow = !!(status & AR40XX_PORT_STATUS_TXFLOW); -+ link->rx_flow = !!(status & AR40XX_PORT_STATUS_RXFLOW); -+ -+ speed = (status & AR40XX_PORT_SPEED) >> -+ AR40XX_PORT_STATUS_SPEED_S; -+ -+ switch (speed) { -+ case AR40XX_PORT_SPEED_10M: -+ link->speed = SWITCH_PORT_SPEED_10; -+ break; -+ case AR40XX_PORT_SPEED_100M: -+ link->speed = SWITCH_PORT_SPEED_100; -+ break; -+ case AR40XX_PORT_SPEED_1000M: -+ link->speed = SWITCH_PORT_SPEED_1000; -+ break; -+ default: -+ link->speed = SWITCH_PORT_SPEED_UNKNOWN; -+ break; -+ } -+} -+ -+static int -+ar40xx_sw_get_port_link(struct switch_dev *dev, int port, -+ struct switch_port_link *link) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ -+ ar40xx_read_port_link(priv, port, link); -+ return 0; -+} -+ -+static const struct switch_attr ar40xx_sw_attr_globals[] = { -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "enable_vlan", -+ .description = "Enable VLAN mode", -+ .set = ar40xx_sw_set_vlan, -+ .get = ar40xx_sw_get_vlan, -+ .max = 1 -+ }, -+ { -+ .type = SWITCH_TYPE_NOVAL, -+ .name = "reset_mibs", -+ .description = "Reset all MIB counters", -+ .set = ar40xx_sw_set_reset_mibs, -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "enable_mirror_rx", -+ .description = "Enable mirroring of RX packets", -+ .set = ar40xx_sw_set_mirror_rx_enable, -+ .get = ar40xx_sw_get_mirror_rx_enable, -+ .max = 1 -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "enable_mirror_tx", -+ .description = "Enable mirroring of TX packets", -+ .set = ar40xx_sw_set_mirror_tx_enable, -+ .get = ar40xx_sw_get_mirror_tx_enable, -+ .max = 1 -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "mirror_monitor_port", -+ .description = "Mirror monitor port", -+ .set = ar40xx_sw_set_mirror_monitor_port, -+ .get = ar40xx_sw_get_mirror_monitor_port, -+ .max = AR40XX_NUM_PORTS - 1 -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "mirror_source_port", -+ .description = "Mirror source port", -+ .set = ar40xx_sw_set_mirror_source_port, -+ .get = ar40xx_sw_get_mirror_source_port, -+ .max = AR40XX_NUM_PORTS - 1 -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "linkdown", -+ .description = "Link down all the PHYs", -+ .set = ar40xx_sw_set_linkdown, -+ .max = 1 -+ }, -+}; -+ -+static const struct switch_attr ar40xx_sw_attr_port[] = { -+ { -+ .type = SWITCH_TYPE_NOVAL, -+ .name = "reset_mib", -+ .description = "Reset single port MIB counters", -+ .set = ar40xx_sw_set_port_reset_mib, -+ }, -+ { -+ .type = SWITCH_TYPE_STRING, -+ .name = "mib", -+ .description = "Get port's MIB counters", -+ .set = NULL, -+ .get = ar40xx_sw_get_port_mib, -+ }, -+}; -+ -+const struct switch_attr ar40xx_sw_attr_vlan[] = { -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "vid", -+ .description = "VLAN ID (0-4094)", -+ .set = ar40xx_sw_set_vid, -+ .get = ar40xx_sw_get_vid, -+ .max = 4094, -+ }, -+}; -+ -+/* End of swconfig support */ -+ -+static int -+ar40xx_wait_bit(struct ar40xx_priv *priv, int reg, u32 mask, u32 val) -+{ -+ int timeout = 20; -+ u32 t; -+ -+ while (1) { -+ t = ar40xx_read(priv, reg); -+ if ((t & mask) == val) -+ return 0; -+ -+ if (timeout-- <= 0) -+ break; -+ -+ usleep_range(10, 20); -+ } -+ -+ pr_err("ar40xx: timeout for reg %08x: %08x & %08x != %08x\n", -+ (unsigned int)reg, t, mask, val); -+ return -ETIMEDOUT; -+} -+ -+static int -+ar40xx_atu_flush(struct ar40xx_priv *priv) -+{ -+ int ret; -+ -+ ret = ar40xx_wait_bit(priv, AR40XX_REG_ATU_FUNC, -+ AR40XX_ATU_FUNC_BUSY, 0); -+ if (!ret) -+ ar40xx_write(priv, AR40XX_REG_ATU_FUNC, -+ AR40XX_ATU_FUNC_OP_FLUSH | -+ AR40XX_ATU_FUNC_BUSY); -+ -+ return ret; -+} -+ -+static void -+ar40xx_ess_reset(struct ar40xx_priv *priv) -+{ -+ reset_control_assert(priv->ess_rst); -+ mdelay(10); -+ reset_control_deassert(priv->ess_rst); -+ /* Waiting for all inner tables init done. -+ * It cost 5~10ms. -+ */ -+ mdelay(10); -+ -+ pr_info("ESS reset ok!\n"); -+} -+ -+/* Start of psgmii self test */ -+ -+static void -+ar40xx_malibu_psgmii_ess_reset(struct ar40xx_priv *priv) -+{ -+ u32 n; -+ struct mii_bus *bus = priv->mii_bus; -+ /* reset phy psgmii */ -+ /* fix phy psgmii RX 20bit */ -+ mdiobus_write(bus, 5, 0x0, 0x005b); -+ /* reset phy psgmii */ -+ mdiobus_write(bus, 5, 0x0, 0x001b); -+ /* release reset phy psgmii */ -+ mdiobus_write(bus, 5, 0x0, 0x005b); -+ -+ for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) { -+ u16 status; -+ -+ status = ar40xx_phy_mmd_read(priv, 5, 1, 0x28); -+ if (status & BIT(0)) -+ break; -+ /* Polling interval to check PSGMII PLL in malibu is ready -+ * the worst time is 8.67ms -+ * for 25MHz reference clock -+ * [512+(128+2048)*49]*80ns+100us -+ */ -+ mdelay(2); -+ } -+ -+ /*check malibu psgmii calibration done end..*/ -+ -+ /*freeze phy psgmii RX CDR*/ -+ mdiobus_write(bus, 5, 0x1a, 0x2230); -+ -+ ar40xx_ess_reset(priv); -+ -+ /*check psgmii calibration done start*/ -+ for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) { -+ u32 status; -+ -+ status = ar40xx_psgmii_read(priv, 0xa0); -+ if (status & BIT(0)) -+ break; -+ /* Polling interval to check PSGMII PLL in ESS is ready */ -+ mdelay(2); -+ } -+ -+ /* check dakota psgmii calibration done end..*/ -+ -+ /* relesae phy psgmii RX CDR */ -+ mdiobus_write(bus, 5, 0x1a, 0x3230); -+ /* release phy psgmii RX 20bit */ -+ mdiobus_write(bus, 5, 0x0, 0x005f); -+} -+ -+static void -+ar40xx_psgmii_single_phy_testing(struct ar40xx_priv *priv, int phy) -+{ -+ int j; -+ u32 tx_ok, tx_error; -+ u32 rx_ok, rx_error; -+ u32 tx_ok_high16; -+ u32 rx_ok_high16; -+ u32 tx_all_ok, rx_all_ok; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mdiobus_write(bus, phy, 0x0, 0x9000); -+ mdiobus_write(bus, phy, 0x0, 0x4140); -+ -+ for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) { -+ u16 status; -+ -+ status = mdiobus_read(bus, phy, 0x11); -+ if (status & AR40XX_PHY_SPEC_STATUS_LINK) -+ break; -+ /* the polling interval to check if the PHY link up or not -+ * maxwait_timer: 750 ms +/-10 ms -+ * minwait_timer : 1 us +/- 0.1us -+ * time resides in minwait_timer ~ maxwait_timer -+ * see IEEE 802.3 section 40.4.5.2 -+ */ -+ mdelay(8); -+ } -+ -+ /* enable check */ -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0000); -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0003); -+ -+ /* start traffic */ -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8020, 0xa000); -+ /* wait for all traffic end -+ * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms -+ */ -+ mdelay(50); -+ -+ /* check counter */ -+ tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e); -+ tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d); -+ tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f); -+ rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b); -+ rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a); -+ rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c); -+ tx_all_ok = tx_ok + (tx_ok_high16 << 16); -+ rx_all_ok = rx_ok + (rx_ok_high16 << 16); -+ if (tx_all_ok == 0x1000 && tx_error == 0) { -+ /* success */ -+ priv->phy_t_status &= (~BIT(phy)); -+ } else { -+ pr_info("PHY %d single test PSGMII issue happen!\n", phy); -+ priv->phy_t_status |= BIT(phy); -+ } -+ -+ mdiobus_write(bus, phy, 0x0, 0x1840); -+} -+ -+static void -+ar40xx_psgmii_all_phy_testing(struct ar40xx_priv *priv) -+{ -+ int phy, j; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ mdiobus_write(bus, 0x1f, 0x0, 0x9000); -+ mdiobus_write(bus, 0x1f, 0x0, 0x4140); -+ -+ for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) { -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ u16 status; -+ -+ status = mdiobus_read(bus, phy, 0x11); -+ if (!(status & BIT(10))) -+ break; -+ } -+ -+ if (phy >= (AR40XX_NUM_PORTS - 1)) -+ break; -+ /* The polling interva to check if the PHY link up or not */ -+ mdelay(8); -+ } -+ /* enable check */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0000); -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0003); -+ -+ /* start traffic */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0xa000); -+ /* wait for all traffic end -+ * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms -+ */ -+ mdelay(50); -+ -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ u32 tx_ok, tx_error; -+ u32 rx_ok, rx_error; -+ u32 tx_ok_high16; -+ u32 rx_ok_high16; -+ u32 tx_all_ok, rx_all_ok; -+ -+ /* check counter */ -+ tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e); -+ tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d); -+ tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f); -+ rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b); -+ rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a); -+ rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c); -+ tx_all_ok = tx_ok + (tx_ok_high16<<16); -+ rx_all_ok = rx_ok + (rx_ok_high16<<16); -+ if (tx_all_ok == 0x1000 && tx_error == 0) { -+ /* success */ -+ priv->phy_t_status &= ~BIT(phy + 8); -+ } else { -+ pr_info("PHY%d test see issue!\n", phy); -+ priv->phy_t_status |= BIT(phy + 8); -+ } -+ } -+ -+ pr_debug("PHY all test 0x%x \r\n", priv->phy_t_status); -+} -+ -+void -+ar40xx_psgmii_self_test(struct ar40xx_priv *priv) -+{ -+ u32 i, phy; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ ar40xx_malibu_psgmii_ess_reset(priv); -+ -+ /* switch to access MII reg for copper */ -+ mdiobus_write(bus, 4, 0x1f, 0x8500); -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ /*enable phy mdio broadcast write*/ -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x801f); -+ } -+ /* force no link by power down */ -+ mdiobus_write(bus, 0x1f, 0x0, 0x1840); -+ /*packet number*/ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x1000); -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8062, 0x05e0); -+ -+ /*fix mdi status */ -+ mdiobus_write(bus, 0x1f, 0x10, 0x6800); -+ for (i = 0; i < AR40XX_PSGMII_CALB_NUM; i++) { -+ priv->phy_t_status = 0; -+ -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1), -+ AR40XX_PORT_LOOKUP_LOOPBACK, -+ AR40XX_PORT_LOOKUP_LOOPBACK); -+ } -+ -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) -+ ar40xx_psgmii_single_phy_testing(priv, phy); -+ -+ ar40xx_psgmii_all_phy_testing(priv); -+ -+ if (priv->phy_t_status) -+ ar40xx_malibu_psgmii_ess_reset(priv); -+ else -+ break; -+ } -+ -+ if (i >= AR40XX_PSGMII_CALB_NUM) -+ pr_info("PSGMII cannot recover\n"); -+ else -+ pr_debug("PSGMII recovered after %d times reset\n", i); -+ -+ /* configuration recover */ -+ /* packet number */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x0); -+ /* disable check */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0); -+ /* disable traffic */ -+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0x0); -+} -+ -+void -+ar40xx_psgmii_self_test_clean(struct ar40xx_priv *priv) -+{ -+ int phy; -+ struct mii_bus *bus = priv->mii_bus; -+ -+ /* disable phy internal loopback */ -+ mdiobus_write(bus, 0x1f, 0x10, 0x6860); -+ mdiobus_write(bus, 0x1f, 0x0, 0x9040); -+ -+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) { -+ /* disable mac loop back */ -+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1), -+ AR40XX_PORT_LOOKUP_LOOPBACK, 0); -+ /* disable phy mdio broadcast write */ -+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x001f); -+ } -+ -+ /* clear fdb entry */ -+ ar40xx_atu_flush(priv); -+} -+ -+/* End of psgmii self test */ -+ -+static void -+ar40xx_mac_mode_init(struct ar40xx_priv *priv, u32 mode) -+{ -+ if (mode == PORT_WRAPPER_PSGMII) { -+ ar40xx_psgmii_write(priv, AR40XX_PSGMII_MODE_CONTROL, 0x2200); -+ ar40xx_psgmii_write(priv, AR40XX_PSGMIIPHY_TX_CONTROL, 0x8380); -+ } -+} -+ -+static -+int ar40xx_cpuport_setup(struct ar40xx_priv *priv) -+{ -+ u32 t; -+ -+ t = AR40XX_PORT_STATUS_TXFLOW | -+ AR40XX_PORT_STATUS_RXFLOW | -+ AR40XX_PORT_TXHALF_FLOW | -+ AR40XX_PORT_DUPLEX | -+ AR40XX_PORT_SPEED_1000M; -+ ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t); -+ usleep_range(10, 20); -+ -+ t |= AR40XX_PORT_TX_EN | -+ AR40XX_PORT_RX_EN; -+ ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t); -+ -+ return 0; -+} -+ -+static void -+ar40xx_init_port(struct ar40xx_priv *priv, int port) -+{ -+ u32 t; -+ -+ ar40xx_rmw(priv, AR40XX_REG_PORT_STATUS(port), -+ AR40XX_PORT_AUTO_LINK_EN, 0); -+ -+ ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0); -+ -+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), 0); -+ -+ t = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH << AR40XX_PORT_VLAN1_OUT_MODE_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t); -+ -+ t = AR40XX_PORT_LOOKUP_LEARN; -+ t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t); -+} -+ -+void -+ar40xx_init_globals(struct ar40xx_priv *priv) -+{ -+ u32 t; -+ -+ /* enable CPU port and disable mirror port */ -+ t = AR40XX_FWD_CTRL0_CPU_PORT_EN | -+ AR40XX_FWD_CTRL0_MIRROR_PORT; -+ ar40xx_write(priv, AR40XX_REG_FWD_CTRL0, t); -+ -+ /* forward multicast and broadcast frames to CPU */ -+ t = (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_UC_FLOOD_S) | -+ (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_MC_FLOOD_S) | -+ (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_BC_FLOOD_S); -+ ar40xx_write(priv, AR40XX_REG_FWD_CTRL1, t); -+ -+ /* enable jumbo frames */ -+ ar40xx_rmw(priv, AR40XX_REG_MAX_FRAME_SIZE, -+ AR40XX_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2); -+ -+ /* Enable MIB counters */ -+ ar40xx_rmw(priv, AR40XX_REG_MODULE_EN, 0, -+ AR40XX_MODULE_EN_MIB); -+ -+ /* Disable AZ */ -+ ar40xx_write(priv, AR40XX_REG_EEE_CTRL, 0); -+ -+ /* set flowctrl thershold for cpu port */ -+ t = (AR40XX_PORT0_FC_THRESH_ON_DFLT << 16) | -+ AR40XX_PORT0_FC_THRESH_OFF_DFLT; -+ ar40xx_write(priv, AR40XX_REG_PORT_FLOWCTRL_THRESH(0), t); -+} -+ -+static void -+ar40xx_malibu_init(struct ar40xx_priv *priv) -+{ -+ int i; -+ struct mii_bus *bus; -+ u16 val; -+ -+ bus = priv->mii_bus; -+ -+ /* war to enable AZ transmitting ability */ -+ ar40xx_phy_mmd_write(priv, AR40XX_PSGMII_ID, 1, -+ AR40XX_MALIBU_PSGMII_MODE_CTRL, -+ AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL); -+ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) { -+ /* change malibu control_dac */ -+ val = ar40xx_phy_mmd_read(priv, i, 7, -+ AR40XX_MALIBU_PHY_MMD7_DAC_CTRL); -+ val &= ~AR40XX_MALIBU_DAC_CTRL_MASK; -+ val |= AR40XX_MALIBU_DAC_CTRL_VALUE; -+ ar40xx_phy_mmd_write(priv, i, 7, -+ AR40XX_MALIBU_PHY_MMD7_DAC_CTRL, val); -+ if (i == AR40XX_MALIBU_PHY_LAST_ADDR) { -+ /* to avoid goes into hibernation */ -+ val = ar40xx_phy_mmd_read(priv, i, 3, -+ AR40XX_MALIBU_PHY_RLP_CTRL); -+ val &= (~(1<<1)); -+ ar40xx_phy_mmd_write(priv, i, 3, -+ AR40XX_MALIBU_PHY_RLP_CTRL, val); -+ } -+ } -+ -+ /* adjust psgmii serdes tx amp */ -+ mdiobus_write(bus, AR40XX_PSGMII_ID, AR40XX_PSGMII_TX_DRIVER_1_CTRL, -+ AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP); -+} -+ -+static int -+ar40xx_hw_init(struct ar40xx_priv *priv) -+{ -+ u32 i; -+ -+ ar40xx_ess_reset(priv); -+ -+ if (priv->mii_bus) -+ ar40xx_malibu_init(priv); -+ else -+ return -1; -+ -+ ar40xx_psgmii_self_test(priv); -+ ar40xx_psgmii_self_test_clean(priv); -+ -+ ar40xx_mac_mode_init(priv, priv->mac_mode); -+ -+ for (i = 0; i < priv->dev.ports; i++) -+ ar40xx_init_port(priv, i); -+ -+ ar40xx_init_globals(priv); -+ -+ return 0; -+} -+ -+/* Start of qm error WAR */ -+ -+static -+int ar40xx_force_1g_full(struct ar40xx_priv *priv, u32 port_id) -+{ -+ u32 reg; -+ -+ if (port_id < 0 || port_id > 6) -+ return -1; -+ -+ reg = AR40XX_REG_PORT_STATUS(port_id); -+ return ar40xx_rmw(priv, reg, AR40XX_PORT_SPEED, -+ (AR40XX_PORT_SPEED_1000M | AR40XX_PORT_DUPLEX)); -+} -+ -+static -+int ar40xx_get_qm_status(struct ar40xx_priv *priv, -+ u32 port_id, u32 *qm_buffer_err) -+{ -+ u32 reg; -+ u32 qm_val; -+ -+ if (port_id < 1 || port_id > 5) { -+ *qm_buffer_err = 0; -+ return -1; -+ } -+ -+ if (port_id < 4) { -+ reg = AR40XX_REG_QM_PORT0_3_QNUM; -+ ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg); -+ qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE); -+ /* every 8 bits for each port */ -+ *qm_buffer_err = (qm_val >> (port_id * 8)) & 0xFF; -+ } else { -+ reg = AR40XX_REG_QM_PORT4_6_QNUM; -+ ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg); -+ qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE); -+ /* every 8 bits for each port */ -+ *qm_buffer_err = (qm_val >> ((port_id-4) * 8)) & 0xFF; -+ } -+ -+ return 0; -+} -+ -+static void -+ar40xx_sw_mac_polling_task(struct ar40xx_priv *priv) -+{ -+ static int task_count; -+ u32 i; -+ u32 reg, value; -+ u32 link, speed, duplex; -+ u32 qm_buffer_err; -+ u16 port_phy_status[AR40XX_NUM_PORTS]; -+ static u32 qm_err_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0}; -+ static u32 link_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0}; -+ struct mii_bus *bus = NULL; -+ -+ if (!priv || !priv->mii_bus) -+ return; -+ -+ bus = priv->mii_bus; -+ -+ ++task_count; -+ -+ for (i = 1; i < AR40XX_NUM_PORTS; ++i) { -+ port_phy_status[i] = -+ mdiobus_read(bus, i-1, AR40XX_PHY_SPEC_STATUS); -+ speed = link = duplex = port_phy_status[i]; -+ speed &= AR40XX_PHY_SPEC_STATUS_SPEED; -+ speed >>= 14; -+ link &= AR40XX_PHY_SPEC_STATUS_LINK; -+ link >>= 10; -+ duplex &= AR40XX_PHY_SPEC_STATUS_DUPLEX; -+ duplex >>= 13; -+ -+ if (link != priv->ar40xx_port_old_link[i]) { -+ ++link_cnt[i]; -+ /* Up --> Down */ -+ if ((priv->ar40xx_port_old_link[i] == -+ AR40XX_PORT_LINK_UP) && -+ (link == AR40XX_PORT_LINK_DOWN)) { -+ /* LINK_EN disable(MAC force mode)*/ -+ reg = AR40XX_REG_PORT_STATUS(i); -+ ar40xx_rmw(priv, reg, -+ AR40XX_PORT_AUTO_LINK_EN, 0); -+ -+ /* Check queue buffer */ -+ qm_err_cnt[i] = 0; -+ ar40xx_get_qm_status(priv, i, &qm_buffer_err); -+ if (qm_buffer_err) { -+ priv->ar40xx_port_qm_buf[i] = -+ AR40XX_QM_NOT_EMPTY; -+ } else { -+ u16 phy_val = 0; -+ -+ priv->ar40xx_port_qm_buf[i] = -+ AR40XX_QM_EMPTY; -+ ar40xx_force_1g_full(priv, i); -+ /* Ref:QCA8337 Datasheet,Clearing -+ * MENU_CTRL_EN prevents phy to -+ * stuck in 100BT mode when -+ * bringing up the link -+ */ -+ ar40xx_phy_dbg_read(priv, i-1, -+ AR40XX_PHY_DEBUG_0, -+ &phy_val); -+ phy_val &= (~AR40XX_PHY_MANU_CTRL_EN); -+ ar40xx_phy_dbg_write(priv, i-1, -+ AR40XX_PHY_DEBUG_0, -+ phy_val); -+ } -+ priv->ar40xx_port_old_link[i] = link; -+ } else if ((priv->ar40xx_port_old_link[i] == -+ AR40XX_PORT_LINK_DOWN) && -+ (link == AR40XX_PORT_LINK_UP)) { -+ /* Down --> Up */ -+ if (priv->port_link_up[i] < 1) { -+ ++priv->port_link_up[i]; -+ } else { -+ /* Change port status */ -+ reg = AR40XX_REG_PORT_STATUS(i); -+ value = ar40xx_read(priv, reg); -+ priv->port_link_up[i] = 0; -+ -+ value &= ~(AR40XX_PORT_DUPLEX | -+ AR40XX_PORT_SPEED); -+ value |= speed | (duplex ? BIT(6) : 0); -+ ar40xx_write(priv, reg, value); -+ /* clock switch need such time -+ * to avoid glitch -+ */ -+ usleep_range(100, 200); -+ -+ value |= AR40XX_PORT_AUTO_LINK_EN; -+ ar40xx_write(priv, reg, value); -+ /* HW need such time to make sure link -+ * stable before enable MAC -+ */ -+ usleep_range(100, 200); -+ -+ if (speed == AR40XX_PORT_SPEED_100M) { -+ u16 phy_val = 0; -+ /* Enable @100M, if down to 10M -+ * clock will change smoothly -+ */ -+ ar40xx_phy_dbg_read(priv, i-1, -+ 0, -+ &phy_val); -+ phy_val |= -+ AR40XX_PHY_MANU_CTRL_EN; -+ ar40xx_phy_dbg_write(priv, i-1, -+ 0, -+ phy_val); -+ } -+ priv->ar40xx_port_old_link[i] = link; -+ } -+ } -+ } -+ -+ if (priv->ar40xx_port_qm_buf[i] == AR40XX_QM_NOT_EMPTY) { -+ /* Check QM */ -+ ar40xx_get_qm_status(priv, i, &qm_buffer_err); -+ if (qm_buffer_err) { -+ ++qm_err_cnt[i]; -+ } else { -+ priv->ar40xx_port_qm_buf[i] = -+ AR40XX_QM_EMPTY; -+ qm_err_cnt[i] = 0; -+ ar40xx_force_1g_full(priv, i); -+ } -+ } -+ } -+} -+ -+static void -+ar40xx_qm_err_check_work_task(struct work_struct *work) -+{ -+ struct ar40xx_priv *priv = container_of(work, struct ar40xx_priv, -+ qm_dwork.work); -+ -+ mutex_lock(&priv->qm_lock); -+ -+ ar40xx_sw_mac_polling_task(priv); -+ -+ mutex_unlock(&priv->qm_lock); -+ -+ schedule_delayed_work(&priv->qm_dwork, -+ msecs_to_jiffies(AR40XX_QM_WORK_DELAY)); -+} -+ -+static int -+ar40xx_qm_err_check_work_start(struct ar40xx_priv *priv) -+{ -+ mutex_init(&priv->qm_lock); -+ -+ INIT_DELAYED_WORK(&priv->qm_dwork, ar40xx_qm_err_check_work_task); -+ -+ schedule_delayed_work(&priv->qm_dwork, -+ msecs_to_jiffies(AR40XX_QM_WORK_DELAY)); -+ -+ return 0; -+} -+ -+/* End of qm error WAR */ -+ -+static int -+ar40xx_vlan_init(struct ar40xx_priv *priv) -+{ -+ int port; -+ unsigned long bmp; -+ -+ /* By default Enable VLAN */ -+ priv->vlan = 1; -+ priv->vlan_table[AR40XX_LAN_VLAN] = priv->cpu_bmp | priv->lan_bmp; -+ priv->vlan_table[AR40XX_WAN_VLAN] = priv->cpu_bmp | priv->wan_bmp; -+ priv->vlan_tagged = priv->cpu_bmp; -+ bmp = priv->lan_bmp; -+ for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS) -+ priv->pvid[port] = AR40XX_LAN_VLAN; -+ -+ bmp = priv->wan_bmp; -+ for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS) -+ priv->pvid[port] = AR40XX_WAN_VLAN; -+ -+ return 0; -+} -+ -+static void -+ar40xx_mib_work_func(struct work_struct *work) -+{ -+ struct ar40xx_priv *priv; -+ int err; -+ -+ priv = container_of(work, struct ar40xx_priv, mib_work.work); -+ -+ mutex_lock(&priv->mib_lock); -+ -+ err = ar40xx_mib_capture(priv); -+ if (err) -+ goto next_port; -+ -+ ar40xx_mib_fetch_port_stat(priv, priv->mib_next_port, false); -+ -+next_port: -+ priv->mib_next_port++; -+ if (priv->mib_next_port >= priv->dev.ports) -+ priv->mib_next_port = 0; -+ -+ mutex_unlock(&priv->mib_lock); -+ -+ schedule_delayed_work(&priv->mib_work, -+ msecs_to_jiffies(AR40XX_MIB_WORK_DELAY)); -+} -+ -+static void -+ar40xx_setup_port(struct ar40xx_priv *priv, int port, u32 members) -+{ -+ u32 t; -+ u32 egress, ingress; -+ u32 pvid = priv->vlan_id[priv->pvid[port]]; -+ -+ if (priv->vlan) { -+ egress = AR40XX_PORT_VLAN1_OUT_MODE_UNMOD; -+ ingress = AR40XX_IN_SECURE; -+ } else { -+ egress = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH; -+ ingress = AR40XX_IN_PORT_ONLY; -+ } -+ -+ t = pvid << AR40XX_PORT_VLAN0_DEF_SVID_S; -+ t |= pvid << AR40XX_PORT_VLAN0_DEF_CVID_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), t); -+ -+ t = AR40XX_PORT_VLAN1_PORT_VLAN_PROP; -+ t |= egress << AR40XX_PORT_VLAN1_OUT_MODE_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t); -+ -+ t = members; -+ t |= AR40XX_PORT_LOOKUP_LEARN; -+ t |= ingress << AR40XX_PORT_LOOKUP_IN_MODE_S; -+ t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S; -+ ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t); -+} -+ -+static void -+ar40xx_vtu_op(struct ar40xx_priv *priv, u32 op, u32 val) -+{ -+ if (ar40xx_wait_bit(priv, AR40XX_REG_VTU_FUNC1, -+ AR40XX_VTU_FUNC1_BUSY, 0)) -+ return; -+ -+ if ((op & AR40XX_VTU_FUNC1_OP) == AR40XX_VTU_FUNC1_OP_LOAD) -+ ar40xx_write(priv, AR40XX_REG_VTU_FUNC0, val); -+ -+ op |= AR40XX_VTU_FUNC1_BUSY; -+ ar40xx_write(priv, AR40XX_REG_VTU_FUNC1, op); -+} -+ -+static void -+ar40xx_vtu_load_vlan(struct ar40xx_priv *priv, u32 vid, u32 port_mask) -+{ -+ u32 op; -+ u32 val; -+ int i; -+ -+ op = AR40XX_VTU_FUNC1_OP_LOAD | (vid << AR40XX_VTU_FUNC1_VID_S); -+ val = AR40XX_VTU_FUNC0_VALID | AR40XX_VTU_FUNC0_IVL; -+ for (i = 0; i < AR40XX_NUM_PORTS; i++) { -+ u32 mode; -+ -+ if ((port_mask & BIT(i)) == 0) -+ mode = AR40XX_VTU_FUNC0_EG_MODE_NOT; -+ else if (priv->vlan == 0) -+ mode = AR40XX_VTU_FUNC0_EG_MODE_KEEP; -+ else if ((priv->vlan_tagged & BIT(i)) || -+ (priv->vlan_id[priv->pvid[i]] != vid)) -+ mode = AR40XX_VTU_FUNC0_EG_MODE_TAG; -+ else -+ mode = AR40XX_VTU_FUNC0_EG_MODE_UNTAG; -+ -+ val |= mode << AR40XX_VTU_FUNC0_EG_MODE_S(i); -+ } -+ ar40xx_vtu_op(priv, op, val); -+} -+ -+static void -+ar40xx_vtu_flush(struct ar40xx_priv *priv) -+{ -+ ar40xx_vtu_op(priv, AR40XX_VTU_FUNC1_OP_FLUSH, 0); -+} -+ -+static int -+ar40xx_sw_hw_apply(struct switch_dev *dev) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ u8 portmask[AR40XX_NUM_PORTS]; -+ int i, j; -+ -+ mutex_lock(&priv->reg_mutex); -+ /* flush all vlan entries */ -+ ar40xx_vtu_flush(priv); -+ -+ memset(portmask, 0, sizeof(portmask)); -+ if (priv->vlan) { -+ for (j = 0; j < AR40XX_MAX_VLANS; j++) { -+ u8 vp = priv->vlan_table[j]; -+ -+ if (!vp) -+ continue; -+ -+ for (i = 0; i < dev->ports; i++) { -+ u8 mask = BIT(i); -+ -+ if (vp & mask) -+ portmask[i] |= vp & ~mask; -+ } -+ -+ ar40xx_vtu_load_vlan(priv, priv->vlan_id[j], -+ priv->vlan_table[j]); -+ } -+ } else { -+ /* 8021q vlan disabled */ -+ for (i = 0; i < dev->ports; i++) { -+ if (i == AR40XX_PORT_CPU) -+ continue; -+ -+ portmask[i] = BIT(AR40XX_PORT_CPU); -+ portmask[AR40XX_PORT_CPU] |= BIT(i); -+ } -+ } -+ -+ /* update the port destination mask registers and tag settings */ -+ for (i = 0; i < dev->ports; i++) -+ ar40xx_setup_port(priv, i, portmask[i]); -+ -+ ar40xx_set_mirror_regs(priv); -+ -+ mutex_unlock(&priv->reg_mutex); -+ return 0; -+} -+ -+static int -+ar40xx_sw_reset_switch(struct switch_dev *dev) -+{ -+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev); -+ int i, rv; -+ -+ mutex_lock(&priv->reg_mutex); -+ memset(&priv->vlan, 0, sizeof(struct ar40xx_priv) - -+ offsetof(struct ar40xx_priv, vlan)); -+ -+ for (i = 0; i < AR40XX_MAX_VLANS; i++) -+ priv->vlan_id[i] = i; -+ -+ ar40xx_vlan_init(priv); -+ -+ priv->mirror_rx = false; -+ priv->mirror_tx = false; -+ priv->source_port = 0; -+ priv->monitor_port = 0; -+ -+ mutex_unlock(&priv->reg_mutex); -+ -+ rv = ar40xx_sw_hw_apply(dev); -+ return rv; -+} -+ -+static int -+ar40xx_start(struct ar40xx_priv *priv) -+{ -+ int ret; -+ -+ ret = ar40xx_hw_init(priv); -+ if (ret) -+ return ret; -+ -+ ret = ar40xx_sw_reset_switch(&priv->dev); -+ if (ret) -+ return ret; -+ -+ /* at last, setup cpu port */ -+ ret = ar40xx_cpuport_setup(priv); -+ if (ret) -+ return ret; -+ -+ schedule_delayed_work(&priv->mib_work, -+ msecs_to_jiffies(AR40XX_MIB_WORK_DELAY)); -+ -+ ar40xx_qm_err_check_work_start(priv); -+ -+ return 0; -+} -+ -+static const struct switch_dev_ops ar40xx_sw_ops = { -+ .attr_global = { -+ .attr = ar40xx_sw_attr_globals, -+ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_globals), -+ }, -+ .attr_port = { -+ .attr = ar40xx_sw_attr_port, -+ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_port), -+ }, -+ .attr_vlan = { -+ .attr = ar40xx_sw_attr_vlan, -+ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_vlan), -+ }, -+ .get_port_pvid = ar40xx_sw_get_pvid, -+ .set_port_pvid = ar40xx_sw_set_pvid, -+ .get_vlan_ports = ar40xx_sw_get_ports, -+ .set_vlan_ports = ar40xx_sw_set_ports, -+ .apply_config = ar40xx_sw_hw_apply, -+ .reset_switch = ar40xx_sw_reset_switch, -+ .get_port_link = ar40xx_sw_get_port_link, -+}; -+ -+/* Start of phy driver support */ -+ -+static const u32 ar40xx_phy_ids[] = { -+ 0x004dd0b1, -+ 0x004dd0b2, /* AR40xx */ -+}; -+ -+static bool -+ar40xx_phy_match(u32 phy_id) -+{ -+ int i; -+ -+ for (i = 0; i < ARRAY_SIZE(ar40xx_phy_ids); i++) -+ if (phy_id == ar40xx_phy_ids[i]) -+ return true; -+ -+ return false; -+} -+ -+static bool -+is_ar40xx_phy(struct mii_bus *bus) -+{ -+ unsigned i; -+ -+ for (i = 0; i < 4; i++) { -+ u32 phy_id; -+ -+ phy_id = mdiobus_read(bus, i, MII_PHYSID1) << 16; -+ phy_id |= mdiobus_read(bus, i, MII_PHYSID2); -+ if (!ar40xx_phy_match(phy_id)) -+ return false; -+ } -+ -+ return true; -+} -+ -+static int -+ar40xx_phy_probe(struct phy_device *phydev) -+{ -+ if (!is_ar40xx_phy(phydev->mdio.bus)) -+ return -ENODEV; -+ -+ ar40xx_priv->mii_bus = phydev->mdio.bus; -+ phydev->priv = ar40xx_priv; -+ if (phydev->mdio.addr == 0) -+ ar40xx_priv->phy = phydev; -+ -+ phydev->supported |= SUPPORTED_1000baseT_Full; -+ phydev->advertising |= ADVERTISED_1000baseT_Full; -+ return 0; -+} -+ -+static void -+ar40xx_phy_remove(struct phy_device *phydev) -+{ -+ ar40xx_priv->mii_bus = NULL; -+ phydev->priv = NULL; -+} -+ -+static int -+ar40xx_phy_config_init(struct phy_device *phydev) -+{ -+ return 0; -+} -+ -+static int -+ar40xx_phy_read_status(struct phy_device *phydev) -+{ -+ if (phydev->mdio.addr != 0) -+ return genphy_read_status(phydev); -+ -+ return 0; -+} -+ -+static int -+ar40xx_phy_config_aneg(struct phy_device *phydev) -+{ -+ if (phydev->mdio.addr == 0) -+ return 0; -+ -+ return genphy_config_aneg(phydev); -+} -+ -+static struct phy_driver ar40xx_phy_driver = { -+ .phy_id = 0x004d0000, -+ .name = "QCA Malibu", -+ .phy_id_mask = 0xffff0000, -+ .features = PHY_BASIC_FEATURES, -+ .probe = ar40xx_phy_probe, -+ .remove = ar40xx_phy_remove, -+ .config_init = ar40xx_phy_config_init, -+ .config_aneg = ar40xx_phy_config_aneg, -+ .read_status = ar40xx_phy_read_status, -+}; -+ -+static uint16_t ar40xx_gpio_get_phy(unsigned int offset) -+{ -+ return offset / 4; -+} -+ -+static uint16_t ar40xx_gpio_get_reg(unsigned int offset) -+{ -+ return 0x8074 + offset % 4; -+} -+ -+static void ar40xx_gpio_set(struct gpio_chip *gc, unsigned int offset, -+ int value) -+{ -+ struct ar40xx_priv *priv = gpiochip_get_data(gc); -+ -+ ar40xx_phy_mmd_write(priv, ar40xx_gpio_get_phy(offset), 0x7, -+ ar40xx_gpio_get_reg(offset), -+ value ? 0xA000 : 0x8000); -+} -+ -+static int ar40xx_gpio_get(struct gpio_chip *gc, unsigned offset) -+{ -+ struct ar40xx_priv *priv = gpiochip_get_data(gc); -+ -+ return ar40xx_phy_mmd_read(priv, ar40xx_gpio_get_phy(offset), 0x7, -+ ar40xx_gpio_get_reg(offset)) == 0xA000; -+} -+ -+static int ar40xx_gpio_get_dir(struct gpio_chip *gc, unsigned offset) -+{ -+ return 0; /* only out direction */ -+} -+ -+static int ar40xx_gpio_dir_out(struct gpio_chip *gc, unsigned offset, -+ int value) -+{ -+ /* -+ * the direction out value is used to set the initial value. -+ * support of this function is required by leds-gpio.c -+ */ -+ ar40xx_gpio_set(gc, offset, value); -+ return 0; -+} -+ -+static void ar40xx_register_gpio(struct device *pdev, -+ struct ar40xx_priv *priv, -+ struct device_node *switch_node) -+{ -+ struct gpio_chip *gc; -+ int err; -+ -+ gc = devm_kzalloc(pdev, sizeof(*gc), GFP_KERNEL); -+ if (!gc) -+ return; -+ -+ gc->label = "ar40xx_gpio", -+ gc->base = -1, -+ gc->ngpio = 5 /* mmd 0 - 4 */ * 4 /* 0x8074 - 0x8077 */, -+ gc->parent = pdev; -+ gc->owner = THIS_MODULE; -+ -+ gc->get_direction = ar40xx_gpio_get_dir; -+ gc->direction_output = ar40xx_gpio_dir_out; -+ gc->get = ar40xx_gpio_get; -+ gc->set = ar40xx_gpio_set; -+ gc->can_sleep = true; -+ gc->label = priv->dev.name; -+ gc->of_node = switch_node; -+ -+ err = devm_gpiochip_add_data(pdev, gc, priv); -+ if (err != 0) -+ dev_err(pdev, "Failed to register gpio %d.\n", err); -+} -+ -+/* End of phy driver support */ -+ -+/* Platform driver probe function */ -+ -+static int ar40xx_probe(struct platform_device *pdev) -+{ -+ struct device_node *switch_node; -+ struct device_node *psgmii_node; -+ const __be32 *mac_mode; -+ struct clk *ess_clk; -+ struct switch_dev *swdev; -+ struct ar40xx_priv *priv; -+ u32 len; -+ u32 num_mibs; -+ struct resource psgmii_base = {0}; -+ struct resource switch_base = {0}; -+ int ret; -+ -+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, priv); -+ ar40xx_priv = priv; -+ -+ switch_node = of_node_get(pdev->dev.of_node); -+ if (of_address_to_resource(switch_node, 0, &switch_base) != 0) -+ return -EIO; -+ -+ priv->hw_addr = devm_ioremap_resource(&pdev->dev, &switch_base); -+ if (IS_ERR(priv->hw_addr)) { -+ dev_err(&pdev->dev, "Failed to ioremap switch_base!\n"); -+ return PTR_ERR(priv->hw_addr); -+ } -+ -+ /*psgmii dts get*/ -+ psgmii_node = of_find_node_by_name(NULL, "ess-psgmii"); -+ if (!psgmii_node) { -+ dev_err(&pdev->dev, "Failed to find ess-psgmii node!\n"); -+ return -EINVAL; -+ } -+ -+ if (of_address_to_resource(psgmii_node, 0, &psgmii_base) != 0) -+ return -EIO; -+ -+ priv->psgmii_hw_addr = devm_ioremap_resource(&pdev->dev, &psgmii_base); -+ if (IS_ERR(priv->psgmii_hw_addr)) { -+ dev_err(&pdev->dev, "psgmii ioremap fail!\n"); -+ return PTR_ERR(priv->psgmii_hw_addr); -+ } -+ -+ mac_mode = of_get_property(switch_node, "switch_mac_mode", &len); -+ if (!mac_mode) { -+ dev_err(&pdev->dev, "Failed to read switch_mac_mode\n"); -+ return -EINVAL; -+ } -+ priv->mac_mode = be32_to_cpup(mac_mode); -+ -+ ess_clk = of_clk_get_by_name(switch_node, "ess_clk"); -+ if (ess_clk) -+ clk_prepare_enable(ess_clk); -+ -+ priv->ess_rst = devm_reset_control_get(&pdev->dev, "ess_rst"); -+ if (IS_ERR(priv->ess_rst)) { -+ dev_err(&pdev->dev, "Failed to get ess_rst control!\n"); -+ return PTR_ERR(priv->ess_rst); -+ } -+ -+ if (of_property_read_u32(switch_node, "switch_cpu_bmp", -+ &priv->cpu_bmp) || -+ of_property_read_u32(switch_node, "switch_lan_bmp", -+ &priv->lan_bmp) || -+ of_property_read_u32(switch_node, "switch_wan_bmp", -+ &priv->wan_bmp)) { -+ dev_err(&pdev->dev, "Failed to read port properties\n"); -+ return -EIO; -+ } -+ -+ ret = phy_driver_register(&ar40xx_phy_driver, THIS_MODULE); -+ if (ret) { -+ dev_err(&pdev->dev, "Failed to register ar40xx phy driver!\n"); -+ return -EIO; -+ } -+ -+ mutex_init(&priv->reg_mutex); -+ mutex_init(&priv->mib_lock); -+ INIT_DELAYED_WORK(&priv->mib_work, ar40xx_mib_work_func); -+ -+ /* register switch */ -+ swdev = &priv->dev; -+ -+ swdev->alias = dev_name(&priv->mii_bus->dev); -+ -+ swdev->cpu_port = AR40XX_PORT_CPU; -+ swdev->name = "QCA AR40xx"; -+ swdev->vlans = AR40XX_MAX_VLANS; -+ swdev->ports = AR40XX_NUM_PORTS; -+ swdev->ops = &ar40xx_sw_ops; -+ ret = register_switch(swdev, NULL); -+ if (ret) -+ goto err_unregister_phy; -+ -+ num_mibs = ARRAY_SIZE(ar40xx_mibs); -+ len = priv->dev.ports * num_mibs * -+ sizeof(*priv->mib_stats); -+ priv->mib_stats = devm_kzalloc(&pdev->dev, len, GFP_KERNEL); -+ if (!priv->mib_stats) { -+ ret = -ENOMEM; -+ goto err_unregister_switch; -+ } -+ -+ ar40xx_start(priv); -+ -+ if (of_property_read_bool(switch_node, "gpio-controller")) -+ ar40xx_register_gpio(&pdev->dev, ar40xx_priv, switch_node); -+ -+ return 0; -+ -+err_unregister_switch: -+ unregister_switch(&priv->dev); -+err_unregister_phy: -+ phy_driver_unregister(&ar40xx_phy_driver); -+ platform_set_drvdata(pdev, NULL); -+ return ret; -+} -+ -+static int ar40xx_remove(struct platform_device *pdev) -+{ -+ struct ar40xx_priv *priv = platform_get_drvdata(pdev); -+ -+ cancel_delayed_work_sync(&priv->qm_dwork); -+ cancel_delayed_work_sync(&priv->mib_work); -+ -+ unregister_switch(&priv->dev); -+ -+ phy_driver_unregister(&ar40xx_phy_driver); -+ -+ return 0; -+} -+ -+static const struct of_device_id ar40xx_of_mtable[] = { -+ {.compatible = "qcom,ess-switch" }, -+ {} -+}; -+ -+struct platform_driver ar40xx_drv = { -+ .probe = ar40xx_probe, -+ .remove = ar40xx_remove, -+ .driver = { -+ .name = "ar40xx", -+ .of_match_table = ar40xx_of_mtable, -+ }, -+}; -+ -+module_platform_driver(ar40xx_drv); -+ -+MODULE_DESCRIPTION("IPQ40XX ESS driver"); -+MODULE_LICENSE("Dual BSD/GPL"); ---- /dev/null -+++ b/drivers/net/phy/ar40xx.h -@@ -0,0 +1,337 @@ -+/* -+ * Copyright (c) 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+ #ifndef __AR40XX_H -+#define __AR40XX_H -+ -+#define AR40XX_MAX_VLANS 128 -+#define AR40XX_NUM_PORTS 6 -+#define AR40XX_NUM_PHYS 5 -+ -+#define BITS(_s, _n) (((1UL << (_n)) - 1) << _s) -+ -+struct ar40xx_priv { -+ struct switch_dev dev; -+ -+ u8 __iomem *hw_addr; -+ u8 __iomem *psgmii_hw_addr; -+ u32 mac_mode; -+ struct reset_control *ess_rst; -+ u32 cpu_bmp; -+ u32 lan_bmp; -+ u32 wan_bmp; -+ -+ struct mii_bus *mii_bus; -+ struct phy_device *phy; -+ -+ /* mutex for qm task */ -+ struct mutex qm_lock; -+ struct delayed_work qm_dwork; -+ u32 port_link_up[AR40XX_NUM_PORTS]; -+ u32 ar40xx_port_old_link[AR40XX_NUM_PORTS]; -+ u32 ar40xx_port_qm_buf[AR40XX_NUM_PORTS]; -+ -+ u32 phy_t_status; -+ -+ /* mutex for switch reg access */ -+ struct mutex reg_mutex; -+ -+ /* mutex for mib task */ -+ struct mutex mib_lock; -+ struct delayed_work mib_work; -+ int mib_next_port; -+ u64 *mib_stats; -+ -+ char buf[2048]; -+ -+ /* all fields below will be cleared on reset */ -+ bool vlan; -+ u16 vlan_id[AR40XX_MAX_VLANS]; -+ u8 vlan_table[AR40XX_MAX_VLANS]; -+ u8 vlan_tagged; -+ u16 pvid[AR40XX_NUM_PORTS]; -+ -+ /* mirror */ -+ bool mirror_rx; -+ bool mirror_tx; -+ int source_port; -+ int monitor_port; -+}; -+ -+#define AR40XX_PORT_LINK_UP 1 -+#define AR40XX_PORT_LINK_DOWN 0 -+#define AR40XX_QM_NOT_EMPTY 1 -+#define AR40XX_QM_EMPTY 0 -+ -+#define AR40XX_LAN_VLAN 1 -+#define AR40XX_WAN_VLAN 2 -+ -+enum ar40xx_port_wrapper_cfg { -+ PORT_WRAPPER_PSGMII = 0, -+}; -+ -+struct ar40xx_mib_desc { -+ u32 size; -+ u32 offset; -+ const char *name; -+}; -+ -+#define AR40XX_PORT_CPU 0 -+ -+#define AR40XX_PSGMII_MODE_CONTROL 0x1b4 -+#define AR40XX_PSGMII_ATHR_CSCO_MODE_25M BIT(0) -+ -+#define AR40XX_PSGMIIPHY_TX_CONTROL 0x288 -+ -+#define AR40XX_MII_ATH_MMD_ADDR 0x0d -+#define AR40XX_MII_ATH_MMD_DATA 0x0e -+#define AR40XX_MII_ATH_DBG_ADDR 0x1d -+#define AR40XX_MII_ATH_DBG_DATA 0x1e -+ -+#define AR40XX_STATS_RXBROAD 0x00 -+#define AR40XX_STATS_RXPAUSE 0x04 -+#define AR40XX_STATS_RXMULTI 0x08 -+#define AR40XX_STATS_RXFCSERR 0x0c -+#define AR40XX_STATS_RXALIGNERR 0x10 -+#define AR40XX_STATS_RXRUNT 0x14 -+#define AR40XX_STATS_RXFRAGMENT 0x18 -+#define AR40XX_STATS_RX64BYTE 0x1c -+#define AR40XX_STATS_RX128BYTE 0x20 -+#define AR40XX_STATS_RX256BYTE 0x24 -+#define AR40XX_STATS_RX512BYTE 0x28 -+#define AR40XX_STATS_RX1024BYTE 0x2c -+#define AR40XX_STATS_RX1518BYTE 0x30 -+#define AR40XX_STATS_RXMAXBYTE 0x34 -+#define AR40XX_STATS_RXTOOLONG 0x38 -+#define AR40XX_STATS_RXGOODBYTE 0x3c -+#define AR40XX_STATS_RXBADBYTE 0x44 -+#define AR40XX_STATS_RXOVERFLOW 0x4c -+#define AR40XX_STATS_FILTERED 0x50 -+#define AR40XX_STATS_TXBROAD 0x54 -+#define AR40XX_STATS_TXPAUSE 0x58 -+#define AR40XX_STATS_TXMULTI 0x5c -+#define AR40XX_STATS_TXUNDERRUN 0x60 -+#define AR40XX_STATS_TX64BYTE 0x64 -+#define AR40XX_STATS_TX128BYTE 0x68 -+#define AR40XX_STATS_TX256BYTE 0x6c -+#define AR40XX_STATS_TX512BYTE 0x70 -+#define AR40XX_STATS_TX1024BYTE 0x74 -+#define AR40XX_STATS_TX1518BYTE 0x78 -+#define AR40XX_STATS_TXMAXBYTE 0x7c -+#define AR40XX_STATS_TXOVERSIZE 0x80 -+#define AR40XX_STATS_TXBYTE 0x84 -+#define AR40XX_STATS_TXCOLLISION 0x8c -+#define AR40XX_STATS_TXABORTCOL 0x90 -+#define AR40XX_STATS_TXMULTICOL 0x94 -+#define AR40XX_STATS_TXSINGLECOL 0x98 -+#define AR40XX_STATS_TXEXCDEFER 0x9c -+#define AR40XX_STATS_TXDEFER 0xa0 -+#define AR40XX_STATS_TXLATECOL 0xa4 -+ -+#define AR40XX_REG_MODULE_EN 0x030 -+#define AR40XX_MODULE_EN_MIB BIT(0) -+ -+#define AR40XX_REG_MIB_FUNC 0x034 -+#define AR40XX_MIB_BUSY BIT(17) -+#define AR40XX_MIB_CPU_KEEP BIT(20) -+#define AR40XX_MIB_FUNC BITS(24, 3) -+#define AR40XX_MIB_FUNC_S 24 -+#define AR40XX_MIB_FUNC_NO_OP 0x0 -+#define AR40XX_MIB_FUNC_FLUSH 0x1 -+ -+#define AR40XX_REG_PORT_STATUS(_i) (0x07c + (_i) * 4) -+#define AR40XX_PORT_SPEED BITS(0, 2) -+#define AR40XX_PORT_STATUS_SPEED_S 0 -+#define AR40XX_PORT_TX_EN BIT(2) -+#define AR40XX_PORT_RX_EN BIT(3) -+#define AR40XX_PORT_STATUS_TXFLOW BIT(4) -+#define AR40XX_PORT_STATUS_RXFLOW BIT(5) -+#define AR40XX_PORT_DUPLEX BIT(6) -+#define AR40XX_PORT_TXHALF_FLOW BIT(7) -+#define AR40XX_PORT_STATUS_LINK_UP BIT(8) -+#define AR40XX_PORT_AUTO_LINK_EN BIT(9) -+#define AR40XX_PORT_STATUS_FLOW_CONTROL BIT(12) -+ -+#define AR40XX_REG_MAX_FRAME_SIZE 0x078 -+#define AR40XX_MAX_FRAME_SIZE_MTU BITS(0, 14) -+ -+#define AR40XX_REG_PORT_HEADER(_i) (0x09c + (_i) * 4) -+ -+#define AR40XX_REG_EEE_CTRL 0x100 -+#define AR40XX_EEE_CTRL_DISABLE_PHY(_i) BIT(4 + (_i) * 2) -+ -+#define AR40XX_REG_PORT_VLAN0(_i) (0x420 + (_i) * 0x8) -+#define AR40XX_PORT_VLAN0_DEF_SVID BITS(0, 12) -+#define AR40XX_PORT_VLAN0_DEF_SVID_S 0 -+#define AR40XX_PORT_VLAN0_DEF_CVID BITS(16, 12) -+#define AR40XX_PORT_VLAN0_DEF_CVID_S 16 -+ -+#define AR40XX_REG_PORT_VLAN1(_i) (0x424 + (_i) * 0x8) -+#define AR40XX_PORT_VLAN1_PORT_VLAN_PROP BIT(6) -+#define AR40XX_PORT_VLAN1_OUT_MODE BITS(12, 2) -+#define AR40XX_PORT_VLAN1_OUT_MODE_S 12 -+#define AR40XX_PORT_VLAN1_OUT_MODE_UNMOD 0 -+#define AR40XX_PORT_VLAN1_OUT_MODE_UNTAG 1 -+#define AR40XX_PORT_VLAN1_OUT_MODE_TAG 2 -+#define AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH 3 -+ -+#define AR40XX_REG_VTU_FUNC0 0x0610 -+#define AR40XX_VTU_FUNC0_EG_MODE BITS(4, 14) -+#define AR40XX_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2) -+#define AR40XX_VTU_FUNC0_EG_MODE_KEEP 0 -+#define AR40XX_VTU_FUNC0_EG_MODE_UNTAG 1 -+#define AR40XX_VTU_FUNC0_EG_MODE_TAG 2 -+#define AR40XX_VTU_FUNC0_EG_MODE_NOT 3 -+#define AR40XX_VTU_FUNC0_IVL BIT(19) -+#define AR40XX_VTU_FUNC0_VALID BIT(20) -+ -+#define AR40XX_REG_VTU_FUNC1 0x0614 -+#define AR40XX_VTU_FUNC1_OP BITS(0, 3) -+#define AR40XX_VTU_FUNC1_OP_NOOP 0 -+#define AR40XX_VTU_FUNC1_OP_FLUSH 1 -+#define AR40XX_VTU_FUNC1_OP_LOAD 2 -+#define AR40XX_VTU_FUNC1_OP_PURGE 3 -+#define AR40XX_VTU_FUNC1_OP_REMOVE_PORT 4 -+#define AR40XX_VTU_FUNC1_OP_GET_NEXT 5 -+#define AR40XX7_VTU_FUNC1_OP_GET_ONE 6 -+#define AR40XX_VTU_FUNC1_FULL BIT(4) -+#define AR40XX_VTU_FUNC1_PORT BIT(8, 4) -+#define AR40XX_VTU_FUNC1_PORT_S 8 -+#define AR40XX_VTU_FUNC1_VID BIT(16, 12) -+#define AR40XX_VTU_FUNC1_VID_S 16 -+#define AR40XX_VTU_FUNC1_BUSY BIT(31) -+ -+#define AR40XX_REG_FWD_CTRL0 0x620 -+#define AR40XX_FWD_CTRL0_CPU_PORT_EN BIT(10) -+#define AR40XX_FWD_CTRL0_MIRROR_PORT BITS(4, 4) -+#define AR40XX_FWD_CTRL0_MIRROR_PORT_S 4 -+ -+#define AR40XX_REG_FWD_CTRL1 0x624 -+#define AR40XX_FWD_CTRL1_UC_FLOOD BITS(0, 7) -+#define AR40XX_FWD_CTRL1_UC_FLOOD_S 0 -+#define AR40XX_FWD_CTRL1_MC_FLOOD BITS(8, 7) -+#define AR40XX_FWD_CTRL1_MC_FLOOD_S 8 -+#define AR40XX_FWD_CTRL1_BC_FLOOD BITS(16, 7) -+#define AR40XX_FWD_CTRL1_BC_FLOOD_S 16 -+#define AR40XX_FWD_CTRL1_IGMP BITS(24, 7) -+#define AR40XX_FWD_CTRL1_IGMP_S 24 -+ -+#define AR40XX_REG_PORT_LOOKUP(_i) (0x660 + (_i) * 0xc) -+#define AR40XX_PORT_LOOKUP_MEMBER BITS(0, 7) -+#define AR40XX_PORT_LOOKUP_IN_MODE BITS(8, 2) -+#define AR40XX_PORT_LOOKUP_IN_MODE_S 8 -+#define AR40XX_PORT_LOOKUP_STATE BITS(16, 3) -+#define AR40XX_PORT_LOOKUP_STATE_S 16 -+#define AR40XX_PORT_LOOKUP_LEARN BIT(20) -+#define AR40XX_PORT_LOOKUP_LOOPBACK BIT(21) -+#define AR40XX_PORT_LOOKUP_ING_MIRROR_EN BIT(25) -+ -+#define AR40XX_REG_ATU_FUNC 0x60c -+#define AR40XX_ATU_FUNC_OP BITS(0, 4) -+#define AR40XX_ATU_FUNC_OP_NOOP 0x0 -+#define AR40XX_ATU_FUNC_OP_FLUSH 0x1 -+#define AR40XX_ATU_FUNC_OP_LOAD 0x2 -+#define AR40XX_ATU_FUNC_OP_PURGE 0x3 -+#define AR40XX_ATU_FUNC_OP_FLUSH_LOCKED 0x4 -+#define AR40XX_ATU_FUNC_OP_FLUSH_UNICAST 0x5 -+#define AR40XX_ATU_FUNC_OP_GET_NEXT 0x6 -+#define AR40XX_ATU_FUNC_OP_SEARCH_MAC 0x7 -+#define AR40XX_ATU_FUNC_OP_CHANGE_TRUNK 0x8 -+#define AR40XX_ATU_FUNC_BUSY BIT(31) -+ -+#define AR40XX_REG_QM_DEBUG_ADDR 0x820 -+#define AR40XX_REG_QM_DEBUG_VALUE 0x824 -+#define AR40XX_REG_QM_PORT0_3_QNUM 0x1d -+#define AR40XX_REG_QM_PORT4_6_QNUM 0x1e -+ -+#define AR40XX_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8) -+#define AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16) -+ -+#define AR40XX_REG_PORT_FLOWCTRL_THRESH(_i) (0x9b0 + (_i) * 0x4) -+#define AR40XX_PORT0_FC_THRESH_ON_DFLT 0x60 -+#define AR40XX_PORT0_FC_THRESH_OFF_DFLT 0x90 -+ -+#define AR40XX_PHY_DEBUG_0 0 -+#define AR40XX_PHY_MANU_CTRL_EN BIT(12) -+ -+#define AR40XX_PHY_DEBUG_2 2 -+ -+#define AR40XX_PHY_SPEC_STATUS 0x11 -+#define AR40XX_PHY_SPEC_STATUS_LINK BIT(10) -+#define AR40XX_PHY_SPEC_STATUS_DUPLEX BIT(13) -+#define AR40XX_PHY_SPEC_STATUS_SPEED BITS(14, 2) -+ -+/* port forwarding state */ -+enum { -+ AR40XX_PORT_STATE_DISABLED = 0, -+ AR40XX_PORT_STATE_BLOCK = 1, -+ AR40XX_PORT_STATE_LISTEN = 2, -+ AR40XX_PORT_STATE_LEARN = 3, -+ AR40XX_PORT_STATE_FORWARD = 4 -+}; -+ -+/* ingress 802.1q mode */ -+enum { -+ AR40XX_IN_PORT_ONLY = 0, -+ AR40XX_IN_PORT_FALLBACK = 1, -+ AR40XX_IN_VLAN_ONLY = 2, -+ AR40XX_IN_SECURE = 3 -+}; -+ -+/* egress 802.1q mode */ -+enum { -+ AR40XX_OUT_KEEP = 0, -+ AR40XX_OUT_STRIP_VLAN = 1, -+ AR40XX_OUT_ADD_VLAN = 2 -+}; -+ -+/* port speed */ -+enum { -+ AR40XX_PORT_SPEED_10M = 0, -+ AR40XX_PORT_SPEED_100M = 1, -+ AR40XX_PORT_SPEED_1000M = 2, -+ AR40XX_PORT_SPEED_ERR = 3, -+}; -+ -+#define AR40XX_MIB_WORK_DELAY 2000 /* msecs */ -+ -+#define AR40XX_QM_WORK_DELAY 100 -+ -+#define AR40XX_MIB_FUNC_CAPTURE 0x3 -+ -+#define AR40XX_REG_PORT_STATS_START 0x1000 -+#define AR40XX_REG_PORT_STATS_LEN 0x100 -+ -+#define AR40XX_PORTS_ALL 0x3f -+ -+#define AR40XX_PSGMII_ID 5 -+#define AR40XX_PSGMII_CALB_NUM 100 -+#define AR40XX_MALIBU_PSGMII_MODE_CTRL 0x6d -+#define AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL 0x220c -+#define AR40XX_MALIBU_PHY_MMD7_DAC_CTRL 0x801a -+#define AR40XX_MALIBU_DAC_CTRL_MASK 0x380 -+#define AR40XX_MALIBU_DAC_CTRL_VALUE 0x280 -+#define AR40XX_MALIBU_PHY_RLP_CTRL 0x805a -+#define AR40XX_PSGMII_TX_DRIVER_1_CTRL 0xb -+#define AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP 0x8a -+#define AR40XX_MALIBU_PHY_LAST_ADDR 4 -+ -+static inline struct ar40xx_priv * -+swdev_to_ar40xx(struct switch_dev *swdev) -+{ -+ return container_of(swdev, struct ar40xx_priv, dev); -+} -+ -+#endif ---- /dev/null -+++ b/drivers/net/phy/mdio-ipq40xx.c -@@ -0,0 +1,203 @@ -+/* -+ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define MDIO_CTRL_0_REG 0x40 -+#define MDIO_CTRL_1_REG 0x44 -+#define MDIO_CTRL_2_REG 0x48 -+#define MDIO_CTRL_3_REG 0x4c -+#define MDIO_CTRL_4_REG 0x50 -+#define MDIO_CTRL_4_ACCESS_BUSY BIT(16) -+#define MDIO_CTRL_4_ACCESS_START BIT(8) -+#define MDIO_CTRL_4_ACCESS_CODE_READ 0 -+#define MDIO_CTRL_4_ACCESS_CODE_WRITE 1 -+#define CTRL_0_REG_DEFAULT_VALUE 0x150FF -+ -+#define IPQ40XX_MDIO_RETRY 1000 -+#define IPQ40XX_MDIO_DELAY 10 -+ -+struct ipq40xx_mdio_data { -+ struct mii_bus *mii_bus; -+ void __iomem *membase; -+ int phy_irq[PHY_MAX_ADDR]; -+ struct device *dev; -+}; -+ -+static int ipq40xx_mdio_wait_busy(struct ipq40xx_mdio_data *am) -+{ -+ int i; -+ -+ for (i = 0; i < IPQ40XX_MDIO_RETRY; i++) { -+ unsigned int busy; -+ -+ busy = readl(am->membase + MDIO_CTRL_4_REG) & -+ MDIO_CTRL_4_ACCESS_BUSY; -+ if (!busy) -+ return 0; -+ -+ /* BUSY might take to be cleard by 15~20 times of loop */ -+ udelay(IPQ40XX_MDIO_DELAY); -+ } -+ -+ dev_err(am->dev, "%s: MDIO operation timed out\n", am->mii_bus->name); -+ -+ return -ETIMEDOUT; -+} -+ -+static int ipq40xx_mdio_read(struct mii_bus *bus, int mii_id, int regnum) -+{ -+ struct ipq40xx_mdio_data *am = bus->priv; -+ int value = 0; -+ unsigned int cmd = 0; -+ -+ lockdep_assert_held(&bus->mdio_lock); -+ -+ if (ipq40xx_mdio_wait_busy(am)) -+ return -ETIMEDOUT; -+ -+ /* issue the phy address and reg */ -+ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG); -+ -+ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_READ; -+ -+ /* issue read command */ -+ writel(cmd, am->membase + MDIO_CTRL_4_REG); -+ -+ /* Wait read complete */ -+ if (ipq40xx_mdio_wait_busy(am)) -+ return -ETIMEDOUT; -+ -+ /* Read data */ -+ value = readl(am->membase + MDIO_CTRL_3_REG); -+ -+ return value; -+} -+ -+static int ipq40xx_mdio_write(struct mii_bus *bus, int mii_id, int regnum, -+ u16 value) -+{ -+ struct ipq40xx_mdio_data *am = bus->priv; -+ unsigned int cmd = 0; -+ -+ lockdep_assert_held(&bus->mdio_lock); -+ -+ if (ipq40xx_mdio_wait_busy(am)) -+ return -ETIMEDOUT; -+ -+ /* issue the phy address and reg */ -+ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG); -+ -+ /* issue write data */ -+ writel(value, am->membase + MDIO_CTRL_2_REG); -+ -+ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_WRITE; -+ /* issue write command */ -+ writel(cmd, am->membase + MDIO_CTRL_4_REG); -+ -+ /* Wait write complete */ -+ if (ipq40xx_mdio_wait_busy(am)) -+ return -ETIMEDOUT; -+ -+ return 0; -+} -+ -+static int ipq40xx_mdio_probe(struct platform_device *pdev) -+{ -+ struct ipq40xx_mdio_data *am; -+ struct resource *res; -+ int i; -+ -+ am = devm_kzalloc(&pdev->dev, sizeof(*am), GFP_KERNEL); -+ if (!am) -+ return -ENOMEM; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "no iomem resource found\n"); -+ return -ENXIO; -+ } -+ -+ am->membase = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(am->membase)) { -+ dev_err(&pdev->dev, "unable to ioremap registers\n"); -+ return PTR_ERR(am->membase); -+ } -+ -+ am->mii_bus = devm_mdiobus_alloc(&pdev->dev); -+ if (!am->mii_bus) -+ return -ENOMEM; -+ -+ writel(CTRL_0_REG_DEFAULT_VALUE, am->membase + MDIO_CTRL_0_REG); -+ -+ am->mii_bus->name = "ipq40xx_mdio"; -+ am->mii_bus->read = ipq40xx_mdio_read; -+ am->mii_bus->write = ipq40xx_mdio_write; -+ memcpy(am->mii_bus->irq, am->phy_irq, sizeof(am->phy_irq)); -+ am->mii_bus->priv = am; -+ am->mii_bus->parent = &pdev->dev; -+ snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev)); -+ -+ for (i = 0; i < PHY_MAX_ADDR; i++) -+ am->phy_irq[i] = PHY_POLL; -+ -+ am->dev = &pdev->dev; -+ platform_set_drvdata(pdev, am); -+ -+ /* edma_axi_probe() use "am" drvdata. -+ * ipq40xx_mdio_probe() must be called first. -+ */ -+ return of_mdiobus_register(am->mii_bus, pdev->dev.of_node); -+} -+ -+static int ipq40xx_mdio_remove(struct platform_device *pdev) -+{ -+ struct ipq40xx_mdio_data *am = platform_get_drvdata(pdev); -+ -+ mdiobus_unregister(am->mii_bus); -+ return 0; -+} -+ -+static const struct of_device_id ipq40xx_mdio_dt_ids[] = { -+ { .compatible = "qcom,ipq4019-mdio" }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, ipq40xx_mdio_dt_ids); -+ -+static struct platform_driver ipq40xx_mdio_driver = { -+ .probe = ipq40xx_mdio_probe, -+ .remove = ipq40xx_mdio_remove, -+ .driver = { -+ .name = "ipq40xx-mdio", -+ .of_match_table = ipq40xx_mdio_dt_ids, -+ }, -+}; -+ -+module_platform_driver(ipq40xx_mdio_driver); -+ -+#define DRV_VERSION "1.0" -+ -+MODULE_DESCRIPTION("IPQ40XX MDIO interface driver"); -+MODULE_AUTHOR("Qualcomm Atheros"); -+MODULE_VERSION(DRV_VERSION); -+MODULE_LICENSE("Dual BSD/GPL"); diff --git a/target/linux/ipq806x/patches-4.9/701-dts-ipq4019-add-mdio-node.patch b/target/linux/ipq806x/patches-4.9/701-dts-ipq4019-add-mdio-node.patch deleted file mode 100644 index 676da7214718..000000000000 --- a/target/linux/ipq806x/patches-4.9/701-dts-ipq4019-add-mdio-node.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 20 Nov 2016 01:10:33 +0100 -Subject: [PATCH] dts: ipq4019: add mdio node for ethernet - -This patch adds the mdio device-tree node. -This is where the switch is connected to, so it's needed -for the ethernet interfaces. - -Note: The driver isn't anywhere close to be upstream, -so the info might change. ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -315,6 +315,34 @@ - reg = <0x4ab000 0x4>; - }; - -+ mdio@90000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "qcom,ipq4019-mdio"; -+ reg = <0x90000 0x64>; -+ status = "disabled"; -+ -+ ethernet-phy@0 { -+ reg = <0>; -+ }; -+ -+ ethernet-phy@1 { -+ reg = <1>; -+ }; -+ -+ ethernet-phy@2 { -+ reg = <2>; -+ }; -+ -+ ethernet-phy@3 { -+ reg = <3>; -+ }; -+ -+ ethernet-phy@4 { -+ reg = <4>; -+ }; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - compatible = "qca,uni-ssphy"; - reg = <0x9a000 0x800>; diff --git a/target/linux/ipq806x/patches-4.9/702-dts-ipq4019-add-PHY-switch-nodes.patch b/target/linux/ipq806x/patches-4.9/702-dts-ipq4019-add-PHY-switch-nodes.patch deleted file mode 100644 index 79031d398a16..000000000000 --- a/target/linux/ipq806x/patches-4.9/702-dts-ipq4019-add-PHY-switch-nodes.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 9deeec35dd3b628b95624e41d4e04acf728991ba Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 20 Nov 2016 02:20:54 +0100 -Subject: [PATCH] dts: ipq4019: add PHY/switch nodes - -This patch adds both the "qcom,ess-switch" and "qcom,ess-psgmii" -nodes which are needed for the ar40xx.c driver to initialize the -switch. - -Signed-off-by: Christian Lamparter ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -343,6 +343,29 @@ - }; - }; - -+ ess-switch@c000000 { -+ compatible = "qcom,ess-switch"; -+ reg = <0xc000000 0x80000>; -+ switch_access_mode = "local bus"; -+ resets = <&gcc ESS_RESET>; -+ reset-names = "ess_rst"; -+ clocks = <&gcc GCC_ESS_CLK>; -+ clock-names = "ess_clk"; -+ switch_cpu_bmp = <0x1>; -+ switch_lan_bmp = <0x1e>; -+ switch_wan_bmp = <0x20>; -+ switch_mac_mode = <0>; /* PORT_WRAPPER_PSGMII */ -+ switch_initvlas = <0x7c 0x54>; -+ status = "disabled"; -+ }; -+ -+ ess-psgmii@98000 { -+ compatible = "qcom,ess-psgmii"; -+ reg = <0x98000 0x800>; -+ psgmii_access_mode = "local bus"; -+ status = "disabled"; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - compatible = "qca,uni-ssphy"; - reg = <0x9a000 0x800>; diff --git a/target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch b/target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch deleted file mode 100644 index eb84124b5435..000000000000 --- a/target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch +++ /dev/null @@ -1,4602 +0,0 @@ -From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Thu, 19 Jan 2017 02:01:31 +0100 -Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver - -Signed-off-by: Christian Lamparter ---- - drivers/net/ethernet/qualcomm/Kconfig | 9 +++++++++ - drivers/net/ethernet/qualcomm/Makefile | 1 + - 2 files changed, 10 insertions(+) - ---- a/drivers/net/ethernet/qualcomm/Kconfig -+++ b/drivers/net/ethernet/qualcomm/Kconfig -@@ -37,4 +37,13 @@ config QCOM_EMAC - low power, Receive-Side Scaling (RSS), and IEEE 1588-2008 - Precision Clock Synchronization Protocol. - -+config ESSEDMA -+ tristate "Qualcomm Atheros ESS Edma support" -+ ---help--- -+ This driver supports ethernet edma adapter. -+ Say Y to build this driver. -+ -+ To compile this driver as a module, choose M here. The module -+ will be called essedma.ko. -+ - endif # NET_VENDOR_QUALCOMM ---- a/drivers/net/ethernet/qualcomm/Makefile -+++ b/drivers/net/ethernet/qualcomm/Makefile -@@ -6,3 +6,4 @@ obj-$(CONFIG_QCA7000) += qcaspi.o - qcaspi-objs := qca_spi.o qca_framing.o qca_7k.o qca_debug.o - - obj-y += emac/ -+obj-$(CONFIG_ESSEDMA) += essedma/ ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/Makefile -@@ -0,0 +1,9 @@ -+# -+## Makefile for the Qualcomm Atheros ethernet edma driver -+# -+ -+ -+obj-$(CONFIG_ESSEDMA) += essedma.o -+ -+essedma-objs := edma_axi.o edma.o edma_ethtool.o -+ ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c -@@ -0,0 +1,2168 @@ -+/* -+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include -+#include -+#include "ess_edma.h" -+#include "edma.h" -+ -+extern struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED]; -+bool edma_stp_rstp; -+u16 edma_ath_eth_type; -+ -+/* edma_skb_priority_offset() -+ * get edma skb priority -+ */ -+static unsigned int edma_skb_priority_offset(struct sk_buff *skb) -+{ -+ return (skb->priority >> 2) & 1; -+} -+ -+/* edma_alloc_tx_ring() -+ * Allocate Tx descriptors ring -+ */ -+static int edma_alloc_tx_ring(struct edma_common_info *edma_cinfo, -+ struct edma_tx_desc_ring *etdr) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ -+ /* Initialize ring */ -+ etdr->size = sizeof(struct edma_sw_desc) * etdr->count; -+ etdr->sw_next_to_fill = 0; -+ etdr->sw_next_to_clean = 0; -+ -+ /* Allocate SW descriptors */ -+ etdr->sw_desc = vzalloc(etdr->size); -+ if (!etdr->sw_desc) { -+ dev_err(&pdev->dev, "buffer alloc of tx ring failed=%p", etdr); -+ return -ENOMEM; -+ } -+ -+ /* Allocate HW descriptors */ -+ etdr->hw_desc = dma_alloc_coherent(&pdev->dev, etdr->size, &etdr->dma, -+ GFP_KERNEL); -+ if (!etdr->hw_desc) { -+ dev_err(&pdev->dev, "descriptor allocation for tx ring failed"); -+ vfree(etdr->sw_desc); -+ return -ENOMEM; -+ } -+ -+ return 0; -+} -+ -+/* edma_free_tx_ring() -+ * Free tx rings allocated by edma_alloc_tx_rings -+ */ -+static void edma_free_tx_ring(struct edma_common_info *edma_cinfo, -+ struct edma_tx_desc_ring *etdr) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ -+ if (likely(etdr->dma)) -+ dma_free_coherent(&pdev->dev, etdr->size, etdr->hw_desc, -+ etdr->dma); -+ -+ vfree(etdr->sw_desc); -+ etdr->sw_desc = NULL; -+} -+ -+/* edma_alloc_rx_ring() -+ * allocate rx descriptor ring -+ */ -+static int edma_alloc_rx_ring(struct edma_common_info *edma_cinfo, -+ struct edma_rfd_desc_ring *erxd) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ -+ erxd->size = sizeof(struct edma_sw_desc) * erxd->count; -+ erxd->sw_next_to_fill = 0; -+ erxd->sw_next_to_clean = 0; -+ -+ /* Allocate SW descriptors */ -+ erxd->sw_desc = vzalloc(erxd->size); -+ if (!erxd->sw_desc) -+ return -ENOMEM; -+ -+ /* Alloc HW descriptors */ -+ erxd->hw_desc = dma_alloc_coherent(&pdev->dev, erxd->size, &erxd->dma, -+ GFP_KERNEL); -+ if (!erxd->hw_desc) { -+ vfree(erxd->sw_desc); -+ return -ENOMEM; -+ } -+ -+ return 0; -+} -+ -+/* edma_free_rx_ring() -+ * Free rx ring allocated by alloc_rx_ring -+ */ -+static void edma_free_rx_ring(struct edma_common_info *edma_cinfo, -+ struct edma_rfd_desc_ring *rxdr) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ -+ if (likely(rxdr->dma)) -+ dma_free_coherent(&pdev->dev, rxdr->size, rxdr->hw_desc, -+ rxdr->dma); -+ -+ vfree(rxdr->sw_desc); -+ rxdr->sw_desc = NULL; -+} -+ -+/* edma_configure_tx() -+ * Configure transmission control data -+ */ -+static void edma_configure_tx(struct edma_common_info *edma_cinfo) -+{ -+ u32 txq_ctrl_data; -+ -+ txq_ctrl_data = (EDMA_TPD_BURST << EDMA_TXQ_NUM_TPD_BURST_SHIFT); -+ txq_ctrl_data |= EDMA_TXQ_CTRL_TPD_BURST_EN; -+ txq_ctrl_data |= (EDMA_TXF_BURST << EDMA_TXQ_TXF_BURST_NUM_SHIFT); -+ edma_write_reg(EDMA_REG_TXQ_CTRL, txq_ctrl_data); -+} -+ -+ -+/* edma_configure_rx() -+ * configure reception control data -+ */ -+static void edma_configure_rx(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_hw *hw = &edma_cinfo->hw; -+ u32 rss_type, rx_desc1, rxq_ctrl_data; -+ -+ /* Set RSS type */ -+ rss_type = hw->rss_type; -+ edma_write_reg(EDMA_REG_RSS_TYPE, rss_type); -+ -+ /* Set RFD burst number */ -+ rx_desc1 = (EDMA_RFD_BURST << EDMA_RXQ_RFD_BURST_NUM_SHIFT); -+ -+ /* Set RFD prefetch threshold */ -+ rx_desc1 |= (EDMA_RFD_THR << EDMA_RXQ_RFD_PF_THRESH_SHIFT); -+ -+ /* Set RFD in host ring low threshold to generte interrupt */ -+ rx_desc1 |= (EDMA_RFD_LTHR << EDMA_RXQ_RFD_LOW_THRESH_SHIFT); -+ edma_write_reg(EDMA_REG_RX_DESC1, rx_desc1); -+ -+ /* Set Rx FIFO threshold to start to DMA data to host */ -+ rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE; -+ -+ /* Set RX remove vlan bit */ -+ rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN; -+ -+ edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data); -+} -+ -+/* edma_alloc_rx_buf() -+ * does skb allocation for the received packets. -+ */ -+static int edma_alloc_rx_buf(struct edma_common_info -+ *edma_cinfo, -+ struct edma_rfd_desc_ring *erdr, -+ int cleaned_count, int queue_id) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct edma_rx_free_desc *rx_desc; -+ struct edma_sw_desc *sw_desc; -+ struct sk_buff *skb; -+ unsigned int i; -+ u16 prod_idx, length; -+ u32 reg_data; -+ -+ if (cleaned_count > erdr->count) { -+ dev_err(&pdev->dev, "Incorrect cleaned_count %d", -+ cleaned_count); -+ return -1; -+ } -+ -+ i = erdr->sw_next_to_fill; -+ -+ while (cleaned_count) { -+ sw_desc = &erdr->sw_desc[i]; -+ length = edma_cinfo->rx_head_buffer_len; -+ -+ if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) { -+ skb = sw_desc->skb; -+ } else { -+ /* alloc skb */ -+ skb = netdev_alloc_skb(edma_netdev[0], length); -+ if (!skb) { -+ /* Better luck next round */ -+ break; -+ } -+ } -+ -+ if (edma_cinfo->page_mode) { -+ struct page *pg = alloc_page(GFP_ATOMIC); -+ -+ if (!pg) { -+ dev_kfree_skb_any(skb); -+ break; -+ } -+ -+ sw_desc->dma = dma_map_page(&pdev->dev, pg, 0, -+ edma_cinfo->rx_page_buffer_len, -+ DMA_FROM_DEVICE); -+ if (dma_mapping_error(&pdev->dev, -+ sw_desc->dma)) { -+ __free_page(pg); -+ dev_kfree_skb_any(skb); -+ break; -+ } -+ -+ skb_fill_page_desc(skb, 0, pg, 0, -+ edma_cinfo->rx_page_buffer_len); -+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_FRAG; -+ sw_desc->length = edma_cinfo->rx_page_buffer_len; -+ } else { -+ sw_desc->dma = dma_map_single(&pdev->dev, skb->data, -+ length, DMA_FROM_DEVICE); -+ if (dma_mapping_error(&pdev->dev, -+ sw_desc->dma)) { -+ dev_kfree_skb_any(skb); -+ break; -+ } -+ -+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_HEAD; -+ sw_desc->length = length; -+ } -+ -+ /* Update the buffer info */ -+ sw_desc->skb = skb; -+ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[i]); -+ rx_desc->buffer_addr = cpu_to_le64(sw_desc->dma); -+ if (++i == erdr->count) -+ i = 0; -+ cleaned_count--; -+ } -+ -+ erdr->sw_next_to_fill = i; -+ -+ if (i == 0) -+ prod_idx = erdr->count - 1; -+ else -+ prod_idx = i - 1; -+ -+ /* Update the producer index */ -+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), ®_data); -+ reg_data &= ~EDMA_RFD_PROD_IDX_BITS; -+ reg_data |= prod_idx; -+ edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data); -+ return cleaned_count; -+} -+ -+/* edma_init_desc() -+ * update descriptor ring size, buffer and producer/consumer index -+ */ -+static void edma_init_desc(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_rfd_desc_ring *rfd_ring; -+ struct edma_tx_desc_ring *etdr; -+ int i = 0, j = 0; -+ u32 data = 0; -+ u16 hw_cons_idx = 0; -+ -+ /* Set the base address of every TPD ring. */ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ etdr = edma_cinfo->tpd_ring[i]; -+ -+ /* Update descriptor ring base address */ -+ edma_write_reg(EDMA_REG_TPD_BASE_ADDR_Q(i), (u32)etdr->dma); -+ edma_read_reg(EDMA_REG_TPD_IDX_Q(i), &data); -+ -+ /* Calculate hardware consumer index */ -+ hw_cons_idx = (data >> EDMA_TPD_CONS_IDX_SHIFT) & 0xffff; -+ etdr->sw_next_to_fill = hw_cons_idx; -+ etdr->sw_next_to_clean = hw_cons_idx; -+ data &= ~(EDMA_TPD_PROD_IDX_MASK << EDMA_TPD_PROD_IDX_SHIFT); -+ data |= hw_cons_idx; -+ -+ /* update producer index */ -+ edma_write_reg(EDMA_REG_TPD_IDX_Q(i), data); -+ -+ /* update SW consumer index register */ -+ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(i), hw_cons_idx); -+ -+ /* Set TPD ring size */ -+ edma_write_reg(EDMA_REG_TPD_RING_SIZE, -+ edma_cinfo->tx_ring_count & -+ EDMA_TPD_RING_SIZE_MASK); -+ } -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ rfd_ring = edma_cinfo->rfd_ring[j]; -+ /* Update Receive Free descriptor ring base address */ -+ edma_write_reg(EDMA_REG_RFD_BASE_ADDR_Q(j), -+ (u32)(rfd_ring->dma)); -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ -+ data = edma_cinfo->rx_head_buffer_len; -+ if (edma_cinfo->page_mode) -+ data = edma_cinfo->rx_page_buffer_len; -+ -+ data &= EDMA_RX_BUF_SIZE_MASK; -+ data <<= EDMA_RX_BUF_SIZE_SHIFT; -+ -+ /* Update RFD ring size and RX buffer size */ -+ data |= (edma_cinfo->rx_ring_count & EDMA_RFD_RING_SIZE_MASK) -+ << EDMA_RFD_RING_SIZE_SHIFT; -+ -+ edma_write_reg(EDMA_REG_RX_DESC0, data); -+ -+ /* Disable TX FIFO low watermark and high watermark */ -+ edma_write_reg(EDMA_REG_TXF_WATER_MARK, 0); -+ -+ /* Load all of base address above */ -+ edma_read_reg(EDMA_REG_TX_SRAM_PART, &data); -+ data |= 1 << EDMA_LOAD_PTR_SHIFT; -+ edma_write_reg(EDMA_REG_TX_SRAM_PART, data); -+} -+ -+/* edma_receive_checksum -+ * Api to check checksum on receive packets -+ */ -+static void edma_receive_checksum(struct edma_rx_return_desc *rd, -+ struct sk_buff *skb) -+{ -+ skb_checksum_none_assert(skb); -+ -+ /* check the RRD IP/L4 checksum bit to see if -+ * its set, which in turn indicates checksum -+ * failure. -+ */ -+ if (rd->rrd6 & EDMA_RRD_CSUM_FAIL_MASK) -+ return; -+ -+ skb->ip_summed = CHECKSUM_UNNECESSARY; -+} -+ -+/* edma_clean_rfd() -+ * clean up rx resourcers on error -+ */ -+static void edma_clean_rfd(struct edma_rfd_desc_ring *erdr, u16 index) -+{ -+ struct edma_rx_free_desc *rx_desc; -+ struct edma_sw_desc *sw_desc; -+ -+ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[index]); -+ sw_desc = &erdr->sw_desc[index]; -+ if (sw_desc->skb) { -+ dev_kfree_skb_any(sw_desc->skb); -+ sw_desc->skb = NULL; -+ } -+ -+ memset(rx_desc, 0, sizeof(struct edma_rx_free_desc)); -+} -+ -+/* edma_rx_complete_fraglist() -+ * Complete Rx processing for fraglist skbs -+ */ -+static void edma_rx_complete_stp_rstp(struct sk_buff *skb, int port_id, struct edma_rx_return_desc *rd) -+{ -+ int i; -+ u32 priority; -+ u16 port_type; -+ u8 mac_addr[EDMA_ETH_HDR_LEN]; -+ -+ port_type = (rd->rrd1 >> EDMA_RRD_PORT_TYPE_SHIFT) -+ & EDMA_RRD_PORT_TYPE_MASK; -+ /* if port type is 0x4, then only proceed with -+ * other stp/rstp calculation -+ */ -+ if (port_type == EDMA_RX_ATH_HDR_RSTP_PORT_TYPE) { -+ u8 bpdu_mac[6] = {0x01, 0x80, 0xc2, 0x00, 0x00, 0x00}; -+ -+ /* calculate the frame priority */ -+ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT) -+ & EDMA_RRD_PRIORITY_MASK; -+ -+ for (i = 0; i < EDMA_ETH_HDR_LEN; i++) -+ mac_addr[i] = skb->data[i]; -+ -+ /* Check if destination mac addr is bpdu addr */ -+ if (!memcmp(mac_addr, bpdu_mac, 6)) { -+ /* destination mac address is BPDU -+ * destination mac address, then add -+ * atheros header to the packet. -+ */ -+ u16 athr_hdr = (EDMA_RX_ATH_HDR_VERSION << EDMA_RX_ATH_HDR_VERSION_SHIFT) | -+ (priority << EDMA_RX_ATH_HDR_PRIORITY_SHIFT) | -+ (EDMA_RX_ATH_HDR_RSTP_PORT_TYPE << EDMA_RX_ATH_PORT_TYPE_SHIFT) | port_id; -+ skb_push(skb, 4); -+ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN); -+ *(uint16_t *)&skb->data[12] = htons(edma_ath_eth_type); -+ *(uint16_t *)&skb->data[14] = htons(athr_hdr); -+ } -+ } -+} -+ -+/* -+ * edma_rx_complete_fraglist() -+ * Complete Rx processing for fraglist skbs -+ */ -+static int edma_rx_complete_fraglist(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean, -+ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct edma_hw *hw = &edma_cinfo->hw; -+ struct sk_buff *skb_temp; -+ struct edma_sw_desc *sw_desc; -+ int i; -+ u16 size_remaining; -+ -+ skb->data_len = 0; -+ skb->tail += (hw->rx_head_buff_size - 16); -+ skb->len = skb->truesize = length; -+ size_remaining = length - (hw->rx_head_buff_size - 16); -+ -+ /* clean-up all related sw_descs */ -+ for (i = 1; i < num_rfds; i++) { -+ struct sk_buff *skb_prev; -+ sw_desc = &erdr->sw_desc[sw_next_to_clean]; -+ skb_temp = sw_desc->skb; -+ -+ dma_unmap_single(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ -+ if (size_remaining < hw->rx_head_buff_size) -+ skb_put(skb_temp, size_remaining); -+ else -+ skb_put(skb_temp, hw->rx_head_buff_size); -+ -+ /* -+ * If we are processing the first rfd, we link -+ * skb->frag_list to the skb corresponding to the -+ * first RFD -+ */ -+ if (i == 1) -+ skb_shinfo(skb)->frag_list = skb_temp; -+ else -+ skb_prev->next = skb_temp; -+ skb_prev = skb_temp; -+ skb_temp->next = NULL; -+ -+ skb->data_len += skb_temp->len; -+ size_remaining -= skb_temp->len; -+ -+ /* Increment SW index */ -+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); -+ (*cleaned_count)++; -+ } -+ -+ return sw_next_to_clean; -+} -+ -+/* edma_rx_complete_paged() -+ * Complete Rx processing for paged skbs -+ */ -+static int edma_rx_complete_paged(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean, -+ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct sk_buff *skb_temp; -+ struct edma_sw_desc *sw_desc; -+ int i; -+ u16 size_remaining; -+ -+ skb_frag_t *frag = &skb_shinfo(skb)->frags[0]; -+ -+ /* Setup skbuff fields */ -+ skb->len = length; -+ -+ if (likely(num_rfds <= 1)) { -+ skb->data_len = length; -+ skb->truesize += edma_cinfo->rx_page_buffer_len; -+ skb_fill_page_desc(skb, 0, skb_frag_page(frag), -+ 16, length); -+ } else { -+ frag->size -= 16; -+ skb->data_len = frag->size; -+ skb->truesize += edma_cinfo->rx_page_buffer_len; -+ size_remaining = length - frag->size; -+ -+ skb_fill_page_desc(skb, 0, skb_frag_page(frag), -+ 16, frag->size); -+ -+ /* clean-up all related sw_descs */ -+ for (i = 1; i < num_rfds; i++) { -+ sw_desc = &erdr->sw_desc[sw_next_to_clean]; -+ skb_temp = sw_desc->skb; -+ frag = &skb_shinfo(skb_temp)->frags[0]; -+ dma_unmap_page(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ -+ if (size_remaining < edma_cinfo->rx_page_buffer_len) -+ frag->size = size_remaining; -+ -+ skb_fill_page_desc(skb, i, skb_frag_page(frag), -+ 0, frag->size); -+ -+ skb_shinfo(skb_temp)->nr_frags = 0; -+ dev_kfree_skb_any(skb_temp); -+ -+ skb->data_len += frag->size; -+ skb->truesize += edma_cinfo->rx_page_buffer_len; -+ size_remaining -= frag->size; -+ -+ /* Increment SW index */ -+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); -+ (*cleaned_count)++; -+ } -+ } -+ -+ return sw_next_to_clean; -+} -+ -+/* -+ * edma_rx_complete() -+ * Main api called from the poll function to process rx packets. -+ */ -+static void edma_rx_complete(struct edma_common_info *edma_cinfo, -+ int *work_done, int work_to_do, int queue_id, -+ struct napi_struct *napi) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct edma_rfd_desc_ring *erdr = edma_cinfo->rfd_ring[queue_id]; -+ struct net_device *netdev; -+ struct edma_adapter *adapter; -+ struct edma_sw_desc *sw_desc; -+ struct sk_buff *skb; -+ struct edma_rx_return_desc *rd; -+ u16 hash_type, rrd[8], cleaned_count = 0, length = 0, num_rfds = 1, -+ sw_next_to_clean, hw_next_to_clean = 0, vlan = 0, ret_count = 0; -+ u32 data = 0; -+ u8 *vaddr; -+ int port_id, i, drop_count = 0; -+ u32 priority; -+ u16 count = erdr->count, rfd_avail; -+ u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3}; -+ -+ sw_next_to_clean = erdr->sw_next_to_clean; -+ -+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data); -+ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) & -+ EDMA_RFD_CONS_IDX_MASK; -+ -+ do { -+ while (sw_next_to_clean != hw_next_to_clean) { -+ if (!work_to_do) -+ break; -+ -+ sw_desc = &erdr->sw_desc[sw_next_to_clean]; -+ skb = sw_desc->skb; -+ -+ /* Unmap the allocated buffer */ -+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) -+ dma_unmap_single(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ else -+ dma_unmap_page(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ -+ /* Get RRD */ -+ if (edma_cinfo->page_mode) { -+ vaddr = kmap_atomic(skb_frag_page(&skb_shinfo(skb)->frags[0])); -+ memcpy((uint8_t *)&rrd[0], vaddr, 16); -+ rd = (struct edma_rx_return_desc *)rrd; -+ kunmap_atomic(vaddr); -+ } else { -+ rd = (struct edma_rx_return_desc *)skb->data; -+ } -+ -+ /* Check if RRD is valid */ -+ if (!(rd->rrd7 & EDMA_RRD_DESC_VALID)) { -+ edma_clean_rfd(erdr, sw_next_to_clean); -+ sw_next_to_clean = (sw_next_to_clean + 1) & -+ (erdr->count - 1); -+ cleaned_count++; -+ continue; -+ } -+ -+ /* Get the number of RFDs from RRD */ -+ num_rfds = rd->rrd1 & EDMA_RRD_NUM_RFD_MASK; -+ -+ /* Get Rx port ID from switch */ -+ port_id = (rd->rrd1 >> EDMA_PORT_ID_SHIFT) & EDMA_PORT_ID_MASK; -+ if ((!port_id) || (port_id > EDMA_MAX_PORTID_SUPPORTED)) { -+ dev_err(&pdev->dev, "Invalid RRD source port bit set"); -+ for (i = 0; i < num_rfds; i++) { -+ edma_clean_rfd(erdr, sw_next_to_clean); -+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); -+ cleaned_count++; -+ } -+ continue; -+ } -+ -+ /* check if we have a sink for the data we receive. -+ * If the interface isn't setup, we have to drop the -+ * incoming data for now. -+ */ -+ netdev = edma_cinfo->portid_netdev_lookup_tbl[port_id]; -+ if (!netdev) { -+ edma_clean_rfd(erdr, sw_next_to_clean); -+ sw_next_to_clean = (sw_next_to_clean + 1) & -+ (erdr->count - 1); -+ cleaned_count++; -+ continue; -+ } -+ adapter = netdev_priv(netdev); -+ -+ /* This code is added to handle a usecase where high -+ * priority stream and a low priority stream are -+ * received simultaneously on DUT. The problem occurs -+ * if one of the Rx rings is full and the corresponding -+ * core is busy with other stuff. This causes ESS CPU -+ * port to backpressure all incoming traffic including -+ * high priority one. We monitor free descriptor count -+ * on each CPU and whenever it reaches threshold (< 80), -+ * we drop all low priority traffic and let only high -+ * priotiy traffic pass through. We can hence avoid -+ * ESS CPU port to send backpressure on high priroity -+ * stream. -+ */ -+ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT) -+ & EDMA_RRD_PRIORITY_MASK; -+ if (likely(!priority && !edma_cinfo->page_mode && (num_rfds <= 1))) { -+ rfd_avail = (count + sw_next_to_clean - hw_next_to_clean - 1) & (count - 1); -+ if (rfd_avail < EDMA_RFD_AVAIL_THR) { -+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_REUSE; -+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); -+ adapter->stats.rx_dropped++; -+ cleaned_count++; -+ drop_count++; -+ if (drop_count == 3) { -+ work_to_do--; -+ (*work_done)++; -+ drop_count = 0; -+ } -+ if (cleaned_count == EDMA_RX_BUFFER_WRITE) { -+ /* If buffer clean count reaches 16, we replenish HW buffers. */ -+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); -+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), -+ sw_next_to_clean); -+ cleaned_count = ret_count; -+ } -+ continue; -+ } -+ } -+ -+ work_to_do--; -+ (*work_done)++; -+ -+ /* Increment SW index */ -+ sw_next_to_clean = (sw_next_to_clean + 1) & -+ (erdr->count - 1); -+ -+ cleaned_count++; -+ -+ /* Get the packet size and allocate buffer */ -+ length = rd->rrd6 & EDMA_RRD_PKT_SIZE_MASK; -+ -+ if (edma_cinfo->page_mode) { -+ /* paged skb */ -+ sw_next_to_clean = edma_rx_complete_paged(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo); -+ if (!pskb_may_pull(skb, ETH_HLEN)) { -+ dev_kfree_skb_any(skb); -+ continue; -+ } -+ } else { -+ /* single or fraglist skb */ -+ -+ /* Addition of 16 bytes is required, as in the packet -+ * first 16 bytes are rrd descriptors, so actual data -+ * starts from an offset of 16. -+ */ -+ skb_reserve(skb, 16); -+ if (likely((num_rfds <= 1) || !edma_cinfo->fraglist_mode)) { -+ skb_put(skb, length); -+ } else { -+ sw_next_to_clean = edma_rx_complete_fraglist(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo); -+ } -+ } -+ -+ if (edma_stp_rstp) { -+ edma_rx_complete_stp_rstp(skb, port_id, rd); -+ } -+ -+ skb->protocol = eth_type_trans(skb, netdev); -+ -+ /* Record Rx queue for RFS/RPS and fill flow hash from HW */ -+ skb_record_rx_queue(skb, queue_to_rxid[queue_id]); -+ if (netdev->features & NETIF_F_RXHASH) { -+ hash_type = (rd->rrd5 >> EDMA_HASH_TYPE_SHIFT); -+ if ((hash_type > EDMA_HASH_TYPE_START) && (hash_type < EDMA_HASH_TYPE_END)) -+ skb_set_hash(skb, rd->rrd2, PKT_HASH_TYPE_L4); -+ } -+ -+#ifdef CONFIG_NF_FLOW_COOKIE -+ skb->flow_cookie = rd->rrd3 & EDMA_RRD_FLOW_COOKIE_MASK; -+#endif -+ edma_receive_checksum(rd, skb); -+ -+ /* Process VLAN HW acceleration indication provided by HW */ -+ if (unlikely(adapter->default_vlan_tag != rd->rrd4)) { -+ vlan = rd->rrd4; -+ if (likely(rd->rrd7 & EDMA_RRD_CVLAN)) -+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan); -+ else if (rd->rrd1 & EDMA_RRD_SVLAN) -+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), vlan); -+ } -+ -+ /* Update rx statistics */ -+ adapter->stats.rx_packets++; -+ adapter->stats.rx_bytes += length; -+ -+ /* Check if we reached refill threshold */ -+ if (cleaned_count == EDMA_RX_BUFFER_WRITE) { -+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); -+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), -+ sw_next_to_clean); -+ cleaned_count = ret_count; -+ } -+ -+ /* At this point skb should go to stack */ -+ napi_gro_receive(napi, skb); -+ } -+ -+ /* Check if we still have NAPI budget */ -+ if (!work_to_do) -+ break; -+ -+ /* Read index once again since we still have NAPI budget */ -+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data); -+ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) & -+ EDMA_RFD_CONS_IDX_MASK; -+ } while (hw_next_to_clean != sw_next_to_clean); -+ -+ erdr->sw_next_to_clean = sw_next_to_clean; -+ -+ /* Refill here in case refill threshold wasn't reached */ -+ if (likely(cleaned_count)) { -+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); -+ if (ret_count) -+ dev_dbg(&pdev->dev, "Not all buffers was reallocated"); -+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), -+ erdr->sw_next_to_clean); -+ } -+} -+ -+/* edma_delete_rfs_filter() -+ * Remove RFS filter from switch -+ */ -+static int edma_delete_rfs_filter(struct edma_adapter *adapter, -+ struct edma_rfs_filter_node *filter_node) -+{ -+ int res = -1; -+ -+ struct flow_keys *keys = &filter_node->keys; -+ -+ if (likely(adapter->set_rfs_rule)) -+ res = (*adapter->set_rfs_rule)(adapter->netdev, -+ flow_get_u32_src(keys), flow_get_u32_dst(keys), -+ keys->ports.src, keys->ports.dst, -+ keys->basic.ip_proto, filter_node->rq_id, 0); -+ -+ return res; -+} -+ -+/* edma_add_rfs_filter() -+ * Add RFS filter to switch -+ */ -+static int edma_add_rfs_filter(struct edma_adapter *adapter, -+ struct flow_keys *keys, u16 rq, -+ struct edma_rfs_filter_node *filter_node) -+{ -+ int res = -1; -+ -+ struct flow_keys *dest_keys = &filter_node->keys; -+ -+ memcpy(dest_keys, &filter_node->keys, sizeof(*dest_keys)); -+/* -+ dest_keys->control = keys->control; -+ dest_keys->basic = keys->basic; -+ dest_keys->addrs = keys->addrs; -+ dest_keys->ports = keys->ports; -+ dest_keys.ip_proto = keys->ip_proto; -+*/ -+ /* Call callback registered by ESS driver */ -+ if (likely(adapter->set_rfs_rule)) -+ res = (*adapter->set_rfs_rule)(adapter->netdev, flow_get_u32_src(keys), -+ flow_get_u32_dst(keys), keys->ports.src, keys->ports.dst, -+ keys->basic.ip_proto, rq, 1); -+ -+ return res; -+} -+ -+/* edma_rfs_key_search() -+ * Look for existing RFS entry -+ */ -+static struct edma_rfs_filter_node *edma_rfs_key_search(struct hlist_head *h, -+ struct flow_keys *key) -+{ -+ struct edma_rfs_filter_node *p; -+ -+ hlist_for_each_entry(p, h, node) -+ if (flow_get_u32_src(&p->keys) == flow_get_u32_src(key) && -+ flow_get_u32_dst(&p->keys) == flow_get_u32_dst(key) && -+ p->keys.ports.src == key->ports.src && -+ p->keys.ports.dst == key->ports.dst && -+ p->keys.basic.ip_proto == key->basic.ip_proto) -+ return p; -+ return NULL; -+} -+ -+/* edma_initialise_rfs_flow_table() -+ * Initialise EDMA RFS flow table -+ */ -+static void edma_initialise_rfs_flow_table(struct edma_adapter *adapter) -+{ -+ int i; -+ -+ spin_lock_init(&adapter->rfs.rfs_ftab_lock); -+ -+ /* Initialize EDMA flow hash table */ -+ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) -+ INIT_HLIST_HEAD(&adapter->rfs.hlist_head[i]); -+ -+ adapter->rfs.max_num_filter = EDMA_RFS_FLOW_ENTRIES; -+ adapter->rfs.filter_available = adapter->rfs.max_num_filter; -+ adapter->rfs.hashtoclean = 0; -+ -+ /* Add timer to get periodic RFS updates from OS */ -+ init_timer(&adapter->rfs.expire_rfs); -+ adapter->rfs.expire_rfs.function = edma_flow_may_expire; -+ adapter->rfs.expire_rfs.data = (unsigned long)adapter; -+ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4); -+} -+ -+/* edma_free_rfs_flow_table() -+ * Free EDMA RFS flow table -+ */ -+static void edma_free_rfs_flow_table(struct edma_adapter *adapter) -+{ -+ int i; -+ -+ /* Remove sync timer */ -+ del_timer_sync(&adapter->rfs.expire_rfs); -+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); -+ -+ /* Free EDMA RFS table entries */ -+ adapter->rfs.filter_available = 0; -+ -+ /* Clean-up EDMA flow hash table */ -+ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) { -+ struct hlist_head *hhead; -+ struct hlist_node *tmp; -+ struct edma_rfs_filter_node *filter_node; -+ int res; -+ -+ hhead = &adapter->rfs.hlist_head[i]; -+ hlist_for_each_entry_safe(filter_node, tmp, hhead, node) { -+ res = edma_delete_rfs_filter(adapter, filter_node); -+ if (res < 0) -+ dev_warn(&adapter->netdev->dev, -+ "EDMA going down but RFS entry %d not allowed to be flushed by Switch", -+ filter_node->flow_id); -+ hlist_del(&filter_node->node); -+ kfree(filter_node); -+ } -+ } -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+} -+ -+/* edma_tx_unmap_and_free() -+ * clean TX buffer -+ */ -+static inline void edma_tx_unmap_and_free(struct platform_device *pdev, -+ struct edma_sw_desc *sw_desc) -+{ -+ struct sk_buff *skb = sw_desc->skb; -+ -+ if (likely((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD) || -+ (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAGLIST))) -+ /* unmap_single for skb head area */ -+ dma_unmap_single(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_TO_DEVICE); -+ else if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG) -+ /* unmap page for paged fragments */ -+ dma_unmap_page(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_TO_DEVICE); -+ -+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_LAST)) -+ dev_kfree_skb_any(skb); -+ -+ sw_desc->flags = 0; -+} -+ -+/* edma_tx_complete() -+ * Used to clean tx queues and update hardware and consumer index -+ */ -+static void edma_tx_complete(struct edma_common_info *edma_cinfo, int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ struct edma_sw_desc *sw_desc; -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i; -+ -+ u16 sw_next_to_clean = etdr->sw_next_to_clean; -+ u16 hw_next_to_clean; -+ u32 data = 0; -+ -+ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &data); -+ hw_next_to_clean = (data >> EDMA_TPD_CONS_IDX_SHIFT) & EDMA_TPD_CONS_IDX_MASK; -+ -+ /* clean the buffer here */ -+ while (sw_next_to_clean != hw_next_to_clean) { -+ sw_desc = &etdr->sw_desc[sw_next_to_clean]; -+ edma_tx_unmap_and_free(pdev, sw_desc); -+ sw_next_to_clean = (sw_next_to_clean + 1) & (etdr->count - 1); -+ } -+ -+ etdr->sw_next_to_clean = sw_next_to_clean; -+ -+ /* update the TPD consumer index register */ -+ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(queue_id), sw_next_to_clean); -+ -+ /* Wake the queue if queue is stopped and netdev link is up */ -+ for (i = 0; i < EDMA_MAX_NETDEV_PER_QUEUE && etdr->nq[i] ; i++) { -+ if (netif_tx_queue_stopped(etdr->nq[i])) { -+ if ((etdr->netdev[i]) && netif_carrier_ok(etdr->netdev[i])) -+ netif_tx_wake_queue(etdr->nq[i]); -+ } -+ } -+} -+ -+/* edma_get_tx_buffer() -+ * Get sw_desc corresponding to the TPD -+ */ -+static struct edma_sw_desc *edma_get_tx_buffer(struct edma_common_info *edma_cinfo, -+ struct edma_tx_desc *tpd, int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ return &etdr->sw_desc[tpd - (struct edma_tx_desc *)etdr->hw_desc]; -+} -+ -+/* edma_get_next_tpd() -+ * Return a TPD descriptor for transfer -+ */ -+static struct edma_tx_desc *edma_get_next_tpd(struct edma_common_info *edma_cinfo, -+ int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ u16 sw_next_to_fill = etdr->sw_next_to_fill; -+ struct edma_tx_desc *tpd_desc = -+ (&((struct edma_tx_desc *)(etdr->hw_desc))[sw_next_to_fill]); -+ -+ etdr->sw_next_to_fill = (etdr->sw_next_to_fill + 1) & (etdr->count - 1); -+ -+ return tpd_desc; -+} -+ -+/* edma_tpd_available() -+ * Check number of free TPDs -+ */ -+static inline u16 edma_tpd_available(struct edma_common_info *edma_cinfo, -+ int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ -+ u16 sw_next_to_fill; -+ u16 sw_next_to_clean; -+ u16 count = 0; -+ -+ sw_next_to_clean = etdr->sw_next_to_clean; -+ sw_next_to_fill = etdr->sw_next_to_fill; -+ -+ if (likely(sw_next_to_clean <= sw_next_to_fill)) -+ count = etdr->count; -+ -+ return count + sw_next_to_clean - sw_next_to_fill - 1; -+} -+ -+/* edma_tx_queue_get() -+ * Get the starting number of the queue -+ */ -+static inline int edma_tx_queue_get(struct edma_adapter *adapter, -+ struct sk_buff *skb, int txq_id) -+{ -+ /* skb->priority is used as an index to skb priority table -+ * and based on packet priority, correspong queue is assigned. -+ */ -+ return adapter->tx_start_offset[txq_id] + edma_skb_priority_offset(skb); -+} -+ -+/* edma_tx_update_hw_idx() -+ * update the producer index for the ring transmitted -+ */ -+static void edma_tx_update_hw_idx(struct edma_common_info *edma_cinfo, -+ struct sk_buff *skb, int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; -+ u32 tpd_idx_data; -+ -+ /* Read and update the producer index */ -+ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &tpd_idx_data); -+ tpd_idx_data &= ~EDMA_TPD_PROD_IDX_BITS; -+ tpd_idx_data |= (etdr->sw_next_to_fill & EDMA_TPD_PROD_IDX_MASK) -+ << EDMA_TPD_PROD_IDX_SHIFT; -+ -+ edma_write_reg(EDMA_REG_TPD_IDX_Q(queue_id), tpd_idx_data); -+} -+ -+/* edma_rollback_tx() -+ * Function to retrieve tx resources in case of error -+ */ -+static void edma_rollback_tx(struct edma_adapter *adapter, -+ struct edma_tx_desc *start_tpd, int queue_id) -+{ -+ struct edma_tx_desc_ring *etdr = adapter->edma_cinfo->tpd_ring[queue_id]; -+ struct edma_sw_desc *sw_desc; -+ struct edma_tx_desc *tpd = NULL; -+ u16 start_index, index; -+ -+ start_index = start_tpd - (struct edma_tx_desc *)(etdr->hw_desc); -+ -+ index = start_index; -+ while (index != etdr->sw_next_to_fill) { -+ tpd = (&((struct edma_tx_desc *)(etdr->hw_desc))[index]); -+ sw_desc = &etdr->sw_desc[index]; -+ edma_tx_unmap_and_free(adapter->pdev, sw_desc); -+ memset(tpd, 0, sizeof(struct edma_tx_desc)); -+ if (++index == etdr->count) -+ index = 0; -+ } -+ etdr->sw_next_to_fill = start_index; -+} -+ -+/* edma_tx_map_and_fill() -+ * gets called from edma_xmit_frame -+ * -+ * This is where the dma of the buffer to be transmitted -+ * gets mapped -+ */ -+static int edma_tx_map_and_fill(struct edma_common_info *edma_cinfo, -+ struct edma_adapter *adapter, struct sk_buff *skb, int queue_id, -+ unsigned int flags_transmit, u16 from_cpu, u16 dp_bitmap, -+ bool packet_is_rstp, int nr_frags) -+{ -+ struct edma_sw_desc *sw_desc = NULL; -+ struct platform_device *pdev = edma_cinfo->pdev; -+ struct edma_tx_desc *tpd = NULL, *start_tpd = NULL; -+ struct sk_buff *iter_skb; -+ int i = 0; -+ u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0; -+ u16 buf_len, lso_desc_len = 0; -+ -+ /* It should either be a nr_frags skb or fraglist skb but not both */ -+ BUG_ON(nr_frags && skb_has_frag_list(skb)); -+ -+ if (skb_is_gso(skb)) { -+ /* TODO: What additional checks need to be performed here */ -+ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) { -+ lso_word1 |= EDMA_TPD_IPV4_EN; -+ ip_hdr(skb)->check = 0; -+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr, -+ ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); -+ } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) { -+ lso_word1 |= EDMA_TPD_LSO_V2_EN; -+ ipv6_hdr(skb)->payload_len = 0; -+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, -+ &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); -+ } else -+ return -EINVAL; -+ -+ lso_word1 |= EDMA_TPD_LSO_EN | ((skb_shinfo(skb)->gso_size & EDMA_TPD_MSS_MASK) << EDMA_TPD_MSS_SHIFT) | -+ (skb_transport_offset(skb) << EDMA_TPD_HDR_SHIFT); -+ } else if (flags_transmit & EDMA_HW_CHECKSUM) { -+ u8 css, cso; -+ cso = skb_checksum_start_offset(skb); -+ css = cso + skb->csum_offset; -+ -+ word1 |= (EDMA_TPD_CUSTOM_CSUM_EN); -+ word1 |= (cso >> 1) << EDMA_TPD_HDR_SHIFT; -+ word1 |= ((css >> 1) << EDMA_TPD_CUSTOM_CSUM_SHIFT); -+ } -+ -+ if (skb->protocol == htons(ETH_P_PPP_SES)) -+ word1 |= EDMA_TPD_PPPOE_EN; -+ -+ if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_FLAG) { -+ switch(skb->vlan_proto) { -+ case htons(ETH_P_8021Q): -+ word3 |= (1 << EDMA_TX_INS_CVLAN); -+ word3 |= skb_vlan_tag_get(skb) << EDMA_TX_CVLAN_TAG_SHIFT; -+ break; -+ case htons(ETH_P_8021AD): -+ word1 |= (1 << EDMA_TX_INS_SVLAN); -+ svlan_tag = skb_vlan_tag_get(skb) << EDMA_TX_SVLAN_TAG_SHIFT; -+ break; -+ default: -+ dev_err(&pdev->dev, "no ctag or stag present\n"); -+ goto vlan_tag_error; -+ } -+ } else if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG) { -+ word3 |= (1 << EDMA_TX_INS_CVLAN); -+ word3 |= (adapter->default_vlan_tag) << EDMA_TX_CVLAN_TAG_SHIFT; -+ } -+ -+ if (packet_is_rstp) { -+ word3 |= dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT; -+ word3 |= from_cpu << EDMA_TPD_FROM_CPU_SHIFT; -+ } else { -+ word3 |= adapter->dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT; -+ } -+ -+ buf_len = skb_headlen(skb); -+ -+ if (lso_word1) { -+ if (lso_word1 & EDMA_TPD_LSO_V2_EN) { -+ -+ /* IPv6 LSOv2 descriptor */ -+ start_tpd = tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_NONE; -+ -+ /* LSOv2 descriptor overrides addr field to pass length */ -+ tpd->addr = cpu_to_le16(skb->len); -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ } -+ -+ tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ if (!start_tpd) -+ start_tpd = tpd; -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ -+ /* The last buffer info contain the skb address, -+ * so skb will be freed after unmap -+ */ -+ sw_desc->length = lso_desc_len; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD; -+ -+ sw_desc->dma = dma_map_single(&adapter->pdev->dev, -+ skb->data, buf_len, DMA_TO_DEVICE); -+ if (dma_mapping_error(&pdev->dev, sw_desc->dma)) -+ goto dma_error; -+ -+ tpd->addr = cpu_to_le32(sw_desc->dma); -+ tpd->len = cpu_to_le16(buf_len); -+ -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ -+ /* The last buffer info contain the skb address, -+ * so it will be freed after unmap -+ */ -+ sw_desc->length = lso_desc_len; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD; -+ -+ buf_len = 0; -+ } -+ -+ if (likely(buf_len)) { -+ -+ /* TODO Do not dequeue descriptor if there is a potential error */ -+ tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ -+ if (!start_tpd) -+ start_tpd = tpd; -+ -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ -+ /* The last buffer info contain the skb address, -+ * so it will be free after unmap -+ */ -+ sw_desc->length = buf_len; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD; -+ sw_desc->dma = dma_map_single(&adapter->pdev->dev, -+ skb->data, buf_len, DMA_TO_DEVICE); -+ if (dma_mapping_error(&pdev->dev, sw_desc->dma)) -+ goto dma_error; -+ -+ tpd->addr = cpu_to_le32(sw_desc->dma); -+ tpd->len = cpu_to_le16(buf_len); -+ -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ } -+ -+ /* Walk through all paged fragments */ -+ while (nr_frags--) { -+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; -+ buf_len = skb_frag_size(frag); -+ tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ sw_desc->length = buf_len; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAG; -+ -+ sw_desc->dma = skb_frag_dma_map(&pdev->dev, frag, 0, buf_len, DMA_TO_DEVICE); -+ -+ if (dma_mapping_error(NULL, sw_desc->dma)) -+ goto dma_error; -+ -+ tpd->addr = cpu_to_le32(sw_desc->dma); -+ tpd->len = cpu_to_le16(buf_len); -+ -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ i++; -+ } -+ -+ /* Walk through all fraglist skbs */ -+ skb_walk_frags(skb, iter_skb) { -+ buf_len = iter_skb->len; -+ tpd = edma_get_next_tpd(edma_cinfo, queue_id); -+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); -+ sw_desc->length = buf_len; -+ sw_desc->dma = dma_map_single(&adapter->pdev->dev, -+ iter_skb->data, buf_len, DMA_TO_DEVICE); -+ -+ if (dma_mapping_error(NULL, sw_desc->dma)) -+ goto dma_error; -+ -+ tpd->addr = cpu_to_le32(sw_desc->dma); -+ tpd->len = cpu_to_le16(buf_len); -+ tpd->svlan_tag = svlan_tag; -+ tpd->word1 = word1 | lso_word1; -+ tpd->word3 = word3; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAGLIST; -+ } -+ -+ if (tpd) -+ tpd->word1 |= 1 << EDMA_TPD_EOP_SHIFT; -+ -+ sw_desc->skb = skb; -+ sw_desc->flags |= EDMA_SW_DESC_FLAG_LAST; -+ -+ return 0; -+ -+dma_error: -+ edma_rollback_tx(adapter, start_tpd, queue_id); -+ dev_err(&pdev->dev, "TX DMA map failed\n"); -+vlan_tag_error: -+ return -ENOMEM; -+} -+ -+/* edma_check_link() -+ * check Link status -+ */ -+static int edma_check_link(struct edma_adapter *adapter) -+{ -+ struct phy_device *phydev = adapter->phydev; -+ -+ if (!(adapter->poll_required)) -+ return __EDMA_LINKUP; -+ -+ if (phydev->link) -+ return __EDMA_LINKUP; -+ -+ return __EDMA_LINKDOWN; -+} -+ -+/* edma_adjust_link() -+ * check for edma link status -+ */ -+void edma_adjust_link(struct net_device *netdev) -+{ -+ int status; -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct phy_device *phydev = adapter->phydev; -+ -+ if (!test_bit(__EDMA_UP, &adapter->state_flags)) -+ return; -+ -+ status = edma_check_link(adapter); -+ -+ if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) { -+ dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed); -+ adapter->link_state = __EDMA_LINKUP; -+ netif_carrier_on(netdev); -+ if (netif_running(netdev)) -+ netif_tx_wake_all_queues(netdev); -+ } else if (status == __EDMA_LINKDOWN && adapter->link_state == __EDMA_LINKUP) { -+ dev_info(&adapter->pdev->dev, "%s: GMAC Link is down\n", netdev->name); -+ adapter->link_state = __EDMA_LINKDOWN; -+ netif_carrier_off(netdev); -+ netif_tx_stop_all_queues(netdev); -+ } -+} -+ -+/* edma_get_stats() -+ * Statistics api used to retreive the tx/rx statistics -+ */ -+struct net_device_stats *edma_get_stats(struct net_device *netdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ return &adapter->stats; -+} -+ -+/* edma_xmit() -+ * Main api to be called by the core for packet transmission -+ */ -+netdev_tx_t edma_xmit(struct sk_buff *skb, -+ struct net_device *net_dev) -+{ -+ struct edma_adapter *adapter = netdev_priv(net_dev); -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ struct edma_tx_desc_ring *etdr; -+ u16 from_cpu, dp_bitmap, txq_id; -+ int ret, nr_frags = 0, num_tpds_needed = 1, queue_id; -+ unsigned int flags_transmit = 0; -+ bool packet_is_rstp = false; -+ struct netdev_queue *nq = NULL; -+ -+ if (skb_shinfo(skb)->nr_frags) { -+ nr_frags = skb_shinfo(skb)->nr_frags; -+ num_tpds_needed += nr_frags; -+ } else if (skb_has_frag_list(skb)) { -+ struct sk_buff *iter_skb; -+ -+ skb_walk_frags(skb, iter_skb) -+ num_tpds_needed++; -+ } -+ -+ if (num_tpds_needed > EDMA_MAX_SKB_FRAGS) { -+ dev_err(&net_dev->dev, -+ "skb received with fragments %d which is more than %lu", -+ num_tpds_needed, EDMA_MAX_SKB_FRAGS); -+ dev_kfree_skb_any(skb); -+ adapter->stats.tx_errors++; -+ return NETDEV_TX_OK; -+ } -+ -+ if (edma_stp_rstp) { -+ u16 ath_hdr, ath_eth_type; -+ u8 mac_addr[EDMA_ETH_HDR_LEN]; -+ ath_eth_type = ntohs(*(uint16_t *)&skb->data[12]); -+ if (ath_eth_type == edma_ath_eth_type) { -+ packet_is_rstp = true; -+ ath_hdr = htons(*(uint16_t *)&skb->data[14]); -+ dp_bitmap = ath_hdr & EDMA_TX_ATH_HDR_PORT_BITMAP_MASK; -+ from_cpu = (ath_hdr & EDMA_TX_ATH_HDR_FROM_CPU_MASK) >> EDMA_TX_ATH_HDR_FROM_CPU_SHIFT; -+ memcpy(mac_addr, skb->data, EDMA_ETH_HDR_LEN); -+ -+ skb_pull(skb, 4); -+ -+ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN); -+ } -+ } -+ -+ /* this will be one of the 4 TX queues exposed to linux kernel */ -+ txq_id = skb_get_queue_mapping(skb); -+ queue_id = edma_tx_queue_get(adapter, skb, txq_id); -+ etdr = edma_cinfo->tpd_ring[queue_id]; -+ nq = netdev_get_tx_queue(net_dev, txq_id); -+ -+ local_bh_disable(); -+ /* Tx is not handled in bottom half context. Hence, we need to protect -+ * Tx from tasks and bottom half -+ */ -+ -+ if (num_tpds_needed > edma_tpd_available(edma_cinfo, queue_id)) { -+ /* not enough descriptor, just stop queue */ -+ netif_tx_stop_queue(nq); -+ local_bh_enable(); -+ dev_dbg(&net_dev->dev, "Not enough descriptors available"); -+ edma_cinfo->edma_ethstats.tx_desc_error++; -+ return NETDEV_TX_BUSY; -+ } -+ -+ /* Check and mark VLAN tag offload */ -+ if (skb_vlan_tag_present(skb)) -+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG; -+ else if (adapter->default_vlan_tag) -+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG; -+ -+ /* Check and mark checksum offload */ -+ if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) -+ flags_transmit |= EDMA_HW_CHECKSUM; -+ -+ /* Map and fill descriptor for Tx */ -+ ret = edma_tx_map_and_fill(edma_cinfo, adapter, skb, queue_id, -+ flags_transmit, from_cpu, dp_bitmap, packet_is_rstp, nr_frags); -+ if (ret) { -+ dev_kfree_skb_any(skb); -+ adapter->stats.tx_errors++; -+ goto netdev_okay; -+ } -+ -+ /* Update SW producer index */ -+ edma_tx_update_hw_idx(edma_cinfo, skb, queue_id); -+ -+ /* update tx statistics */ -+ adapter->stats.tx_packets++; -+ adapter->stats.tx_bytes += skb->len; -+ -+netdev_okay: -+ local_bh_enable(); -+ return NETDEV_TX_OK; -+} -+ -+/* -+ * edma_flow_may_expire() -+ * Timer function called periodically to delete the node -+ */ -+void edma_flow_may_expire(unsigned long data) -+{ -+ struct edma_adapter *adapter = (struct edma_adapter *)data; -+ int j; -+ -+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); -+ for (j = 0; j < EDMA_RFS_EXPIRE_COUNT_PER_CALL; j++) { -+ struct hlist_head *hhead; -+ struct hlist_node *tmp; -+ struct edma_rfs_filter_node *n; -+ bool res; -+ -+ hhead = &adapter->rfs.hlist_head[adapter->rfs.hashtoclean++]; -+ hlist_for_each_entry_safe(n, tmp, hhead, node) { -+ res = rps_may_expire_flow(adapter->netdev, n->rq_id, -+ n->flow_id, n->filter_id); -+ if (res) { -+ int ret; -+ ret = edma_delete_rfs_filter(adapter, n); -+ if (ret < 0) -+ dev_dbg(&adapter->netdev->dev, -+ "RFS entry %d not allowed to be flushed by Switch", -+ n->flow_id); -+ else { -+ hlist_del(&n->node); -+ kfree(n); -+ adapter->rfs.filter_available++; -+ } -+ } -+ } -+ } -+ -+ adapter->rfs.hashtoclean = adapter->rfs.hashtoclean & (EDMA_RFS_FLOW_ENTRIES - 1); -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4); -+} -+ -+/* edma_rx_flow_steer() -+ * Called by core to to steer the flow to CPU -+ */ -+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb, -+ u16 rxq, u32 flow_id) -+{ -+ struct flow_keys keys; -+ struct edma_rfs_filter_node *filter_node; -+ struct edma_adapter *adapter = netdev_priv(dev); -+ u16 hash_tblid; -+ int res; -+ -+ if (skb->protocol == htons(ETH_P_IPV6)) { -+ dev_err(&adapter->pdev->dev, "IPv6 not supported\n"); -+ res = -EINVAL; -+ goto no_protocol_err; -+ } -+ -+ /* Dissect flow parameters -+ * We only support IPv4 + TCP/UDP -+ */ -+ res = skb_flow_dissect_flow_keys(skb, &keys, 0); -+ if (!((keys.basic.ip_proto == IPPROTO_TCP) || (keys.basic.ip_proto == IPPROTO_UDP))) { -+ res = -EPROTONOSUPPORT; -+ goto no_protocol_err; -+ } -+ -+ /* Check if table entry exists */ -+ hash_tblid = skb_get_hash_raw(skb) & EDMA_RFS_FLOW_ENTRIES_MASK; -+ -+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); -+ filter_node = edma_rfs_key_search(&adapter->rfs.hlist_head[hash_tblid], &keys); -+ -+ if (filter_node) { -+ if (rxq == filter_node->rq_id) { -+ res = -EEXIST; -+ goto out; -+ } else { -+ res = edma_delete_rfs_filter(adapter, filter_node); -+ if (res < 0) -+ dev_warn(&adapter->netdev->dev, -+ "Cannot steer flow %d to different queue", -+ filter_node->flow_id); -+ else { -+ adapter->rfs.filter_available++; -+ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node); -+ if (res < 0) { -+ dev_warn(&adapter->netdev->dev, -+ "Cannot steer flow %d to different queue", -+ filter_node->flow_id); -+ } else { -+ adapter->rfs.filter_available--; -+ filter_node->rq_id = rxq; -+ filter_node->filter_id = res; -+ } -+ } -+ } -+ } else { -+ if (adapter->rfs.filter_available == 0) { -+ res = -EBUSY; -+ goto out; -+ } -+ -+ filter_node = kmalloc(sizeof(*filter_node), GFP_ATOMIC); -+ if (!filter_node) { -+ res = -ENOMEM; -+ goto out; -+ } -+ -+ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node); -+ if (res < 0) { -+ kfree(filter_node); -+ goto out; -+ } -+ -+ adapter->rfs.filter_available--; -+ filter_node->rq_id = rxq; -+ filter_node->filter_id = res; -+ filter_node->flow_id = flow_id; -+ filter_node->keys = keys; -+ INIT_HLIST_NODE(&filter_node->node); -+ hlist_add_head(&filter_node->node, &adapter->rfs.hlist_head[hash_tblid]); -+ } -+ -+out: -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+no_protocol_err: -+ return res; -+} -+ -+/* edma_register_rfs_filter() -+ * Add RFS filter callback -+ */ -+int edma_register_rfs_filter(struct net_device *netdev, -+ set_rfs_filter_callback_t set_filter) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); -+ -+ if (adapter->set_rfs_rule) { -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+ return -1; -+ } -+ -+ adapter->set_rfs_rule = set_filter; -+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); -+ -+ return 0; -+} -+ -+/* edma_alloc_tx_rings() -+ * Allocate rx rings -+ */ -+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i, err = 0; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ err = edma_alloc_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]); -+ if (err) { -+ dev_err(&pdev->dev, "Tx Queue alloc %u failed\n", i); -+ return err; -+ } -+ } -+ -+ return 0; -+} -+ -+/* edma_free_tx_rings() -+ * Free tx rings -+ */ -+void edma_free_tx_rings(struct edma_common_info *edma_cinfo) -+{ -+ int i; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) -+ edma_free_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]); -+} -+ -+/* edma_free_tx_resources() -+ * Free buffers associated with tx rings -+ */ -+void edma_free_tx_resources(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_tx_desc_ring *etdr; -+ struct edma_sw_desc *sw_desc; -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i, j; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ etdr = edma_cinfo->tpd_ring[i]; -+ for (j = 0; j < EDMA_TX_RING_SIZE; j++) { -+ sw_desc = &etdr->sw_desc[j]; -+ if (sw_desc->flags & (EDMA_SW_DESC_FLAG_SKB_HEAD | -+ EDMA_SW_DESC_FLAG_SKB_FRAG | EDMA_SW_DESC_FLAG_SKB_FRAGLIST)) -+ edma_tx_unmap_and_free(pdev, sw_desc); -+ } -+ } -+} -+ -+/* edma_alloc_rx_rings() -+ * Allocate rx rings -+ */ -+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo) -+{ -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i, j, err = 0; -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ err = edma_alloc_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]); -+ if (err) { -+ dev_err(&pdev->dev, "Rx Queue alloc%u failed\n", i); -+ return err; -+ } -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ -+ return 0; -+} -+ -+/* edma_free_rx_rings() -+ * free rx rings -+ */ -+void edma_free_rx_rings(struct edma_common_info *edma_cinfo) -+{ -+ int i, j; -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ edma_free_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]); -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+} -+ -+/* edma_free_queues() -+ * Free the queues allocaated -+ */ -+void edma_free_queues(struct edma_common_info *edma_cinfo) -+{ -+ int i , j; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ if (edma_cinfo->tpd_ring[i]) -+ kfree(edma_cinfo->tpd_ring[i]); -+ edma_cinfo->tpd_ring[i] = NULL; -+ } -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ if (edma_cinfo->rfd_ring[j]) -+ kfree(edma_cinfo->rfd_ring[j]); -+ edma_cinfo->rfd_ring[j] = NULL; -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ -+ edma_cinfo->num_rx_queues = 0; -+ edma_cinfo->num_tx_queues = 0; -+ -+ return; -+} -+ -+/* edma_free_rx_resources() -+ * Free buffers associated with tx rings -+ */ -+void edma_free_rx_resources(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_rfd_desc_ring *erdr; -+ struct edma_sw_desc *sw_desc; -+ struct platform_device *pdev = edma_cinfo->pdev; -+ int i, j, k; -+ -+ for (i = 0, k = 0; i < edma_cinfo->num_rx_queues; i++) { -+ erdr = edma_cinfo->rfd_ring[k]; -+ for (j = 0; j < EDMA_RX_RING_SIZE; j++) { -+ sw_desc = &erdr->sw_desc[j]; -+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) { -+ dma_unmap_single(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ edma_clean_rfd(erdr, j); -+ } else if ((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)) { -+ dma_unmap_page(&pdev->dev, sw_desc->dma, -+ sw_desc->length, DMA_FROM_DEVICE); -+ edma_clean_rfd(erdr, j); -+ } -+ } -+ k += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ -+ } -+} -+ -+/* edma_alloc_queues_tx() -+ * Allocate memory for all rings -+ */ -+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo) -+{ -+ int i; -+ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ struct edma_tx_desc_ring *etdr; -+ etdr = kzalloc(sizeof(struct edma_tx_desc_ring), GFP_KERNEL); -+ if (!etdr) -+ goto err; -+ etdr->count = edma_cinfo->tx_ring_count; -+ edma_cinfo->tpd_ring[i] = etdr; -+ } -+ -+ return 0; -+err: -+ edma_free_queues(edma_cinfo); -+ return -1; -+} -+ -+/* edma_alloc_queues_rx() -+ * Allocate memory for all rings -+ */ -+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo) -+{ -+ int i, j; -+ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ struct edma_rfd_desc_ring *rfd_ring; -+ rfd_ring = kzalloc(sizeof(struct edma_rfd_desc_ring), -+ GFP_KERNEL); -+ if (!rfd_ring) -+ goto err; -+ rfd_ring->count = edma_cinfo->rx_ring_count; -+ edma_cinfo->rfd_ring[j] = rfd_ring; -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ return 0; -+err: -+ edma_free_queues(edma_cinfo); -+ return -1; -+} -+ -+/* edma_clear_irq_status() -+ * Clear interrupt status -+ */ -+void edma_clear_irq_status() -+{ -+ edma_write_reg(EDMA_REG_RX_ISR, 0xff); -+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff); -+ edma_write_reg(EDMA_REG_MISC_ISR, 0x1fff); -+ edma_write_reg(EDMA_REG_WOL_ISR, 0x1); -+}; -+ -+/* edma_configure() -+ * Configure skb, edma interrupts and control register. -+ */ -+int edma_configure(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_hw *hw = &edma_cinfo->hw; -+ u32 intr_modrt_data; -+ u32 intr_ctrl_data = 0; -+ int i, j, ret_count; -+ -+ edma_read_reg(EDMA_REG_INTR_CTRL, &intr_ctrl_data); -+ intr_ctrl_data &= ~(1 << EDMA_INTR_SW_IDX_W_TYP_SHIFT); -+ intr_ctrl_data |= hw->intr_sw_idx_w << EDMA_INTR_SW_IDX_W_TYP_SHIFT; -+ edma_write_reg(EDMA_REG_INTR_CTRL, intr_ctrl_data); -+ -+ edma_clear_irq_status(); -+ -+ /* Clear any WOL status */ -+ edma_write_reg(EDMA_REG_WOL_CTRL, 0); -+ intr_modrt_data = (EDMA_TX_IMT << EDMA_IRQ_MODRT_TX_TIMER_SHIFT); -+ intr_modrt_data |= (EDMA_RX_IMT << EDMA_IRQ_MODRT_RX_TIMER_SHIFT); -+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data); -+ edma_configure_tx(edma_cinfo); -+ edma_configure_rx(edma_cinfo); -+ -+ /* Allocate the RX buffer */ -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ struct edma_rfd_desc_ring *ring = edma_cinfo->rfd_ring[j]; -+ ret_count = edma_alloc_rx_buf(edma_cinfo, ring, ring->count, j); -+ if (ret_count) { -+ dev_dbg(&edma_cinfo->pdev->dev, "not all rx buffers allocated\n"); -+ } -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ -+ /* Configure descriptor Ring */ -+ edma_init_desc(edma_cinfo); -+ return 0; -+} -+ -+/* edma_irq_enable() -+ * Enable default interrupt generation settings -+ */ -+void edma_irq_enable(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_hw *hw = &edma_cinfo->hw; -+ int i, j; -+ -+ edma_write_reg(EDMA_REG_RX_ISR, 0xff); -+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { -+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(j), hw->rx_intr_mask); -+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); -+ } -+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff); -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) -+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), hw->tx_intr_mask); -+} -+ -+/* edma_irq_disable() -+ * Disable Interrupt -+ */ -+void edma_irq_disable(struct edma_common_info *edma_cinfo) -+{ -+ int i; -+ -+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) -+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(i), 0x0); -+ -+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) -+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), 0x0); -+ edma_write_reg(EDMA_REG_MISC_IMR, 0); -+ edma_write_reg(EDMA_REG_WOL_IMR, 0); -+} -+ -+/* edma_free_irqs() -+ * Free All IRQs -+ */ -+void edma_free_irqs(struct edma_adapter *adapter) -+{ -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ int i, j; -+ int k = ((edma_cinfo->num_rx_queues == 4) ? 1 : 2); -+ -+ for (i = 0; i < CONFIG_NR_CPUS; i++) { -+ for (j = edma_cinfo->edma_percpu_info[i].tx_start; j < (edma_cinfo->edma_percpu_info[i].tx_start + 4); j++) -+ free_irq(edma_cinfo->tx_irq[j], &edma_cinfo->edma_percpu_info[i]); -+ -+ for (j = edma_cinfo->edma_percpu_info[i].rx_start; j < (edma_cinfo->edma_percpu_info[i].rx_start + k); j++) -+ free_irq(edma_cinfo->rx_irq[j], &edma_cinfo->edma_percpu_info[i]); -+ } -+} -+ -+/* edma_enable_rx_ctrl() -+ * Enable RX queue control -+ */ -+void edma_enable_rx_ctrl(struct edma_hw *hw) -+{ -+ u32 data; -+ -+ edma_read_reg(EDMA_REG_RXQ_CTRL, &data); -+ data |= EDMA_RXQ_CTRL_EN; -+ edma_write_reg(EDMA_REG_RXQ_CTRL, data); -+} -+ -+ -+/* edma_enable_tx_ctrl() -+ * Enable TX queue control -+ */ -+void edma_enable_tx_ctrl(struct edma_hw *hw) -+{ -+ u32 data; -+ -+ edma_read_reg(EDMA_REG_TXQ_CTRL, &data); -+ data |= EDMA_TXQ_CTRL_TXQ_EN; -+ edma_write_reg(EDMA_REG_TXQ_CTRL, data); -+} -+ -+/* edma_stop_rx_tx() -+ * Disable RX/TQ Queue control -+ */ -+void edma_stop_rx_tx(struct edma_hw *hw) -+{ -+ u32 data; -+ -+ edma_read_reg(EDMA_REG_RXQ_CTRL, &data); -+ data &= ~EDMA_RXQ_CTRL_EN; -+ edma_write_reg(EDMA_REG_RXQ_CTRL, data); -+ edma_read_reg(EDMA_REG_TXQ_CTRL, &data); -+ data &= ~EDMA_TXQ_CTRL_TXQ_EN; -+ edma_write_reg(EDMA_REG_TXQ_CTRL, data); -+} -+ -+/* edma_reset() -+ * Reset the EDMA -+ */ -+int edma_reset(struct edma_common_info *edma_cinfo) -+{ -+ struct edma_hw *hw = &edma_cinfo->hw; -+ -+ edma_irq_disable(edma_cinfo); -+ -+ edma_clear_irq_status(); -+ -+ edma_stop_rx_tx(hw); -+ -+ return 0; -+} -+ -+/* edma_fill_netdev() -+ * Fill netdev for each etdr -+ */ -+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int queue_id, -+ int dev, int txq_id) -+{ -+ struct edma_tx_desc_ring *etdr; -+ int i = 0; -+ -+ etdr = edma_cinfo->tpd_ring[queue_id]; -+ -+ while (etdr->netdev[i]) -+ i++; -+ -+ if (i >= EDMA_MAX_NETDEV_PER_QUEUE) -+ return -1; -+ -+ /* Populate the netdev associated with the tpd ring */ -+ etdr->netdev[i] = edma_netdev[dev]; -+ etdr->nq[i] = netdev_get_tx_queue(edma_netdev[dev], txq_id); -+ -+ return 0; -+} -+ -+/* edma_change_mtu() -+ * change the MTU of the NIC. -+ */ -+int edma_change_mtu(struct net_device *netdev, int new_mtu) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ int old_mtu = netdev->mtu; -+ int max_frame_size = new_mtu + ETH_HLEN + ETH_FCS_LEN + (2 * VLAN_HLEN); -+ -+ if ((max_frame_size < ETH_ZLEN + ETH_FCS_LEN) || -+ (max_frame_size > EDMA_MAX_JUMBO_FRAME_SIZE)) { -+ dev_err(&edma_cinfo->pdev->dev, "MTU setting not correct\n"); -+ return -EINVAL; -+ } -+ -+ /* set MTU */ -+ if (old_mtu != new_mtu) { -+ netdev->mtu = new_mtu; -+ netdev_update_features(netdev); -+ } -+ -+ return 0; -+} -+ -+/* edma_set_mac() -+ * Change the Ethernet Address of the NIC -+ */ -+int edma_set_mac_addr(struct net_device *netdev, void *p) -+{ -+ struct sockaddr *addr = p; -+ -+ if (!is_valid_ether_addr(addr->sa_data)) -+ return -EINVAL; -+ -+ if (netif_running(netdev)) -+ return -EBUSY; -+ -+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); -+ return 0; -+} -+ -+/* edma_set_stp_rstp() -+ * set stp/rstp -+ */ -+void edma_set_stp_rstp(bool rstp) -+{ -+ edma_stp_rstp = rstp; -+} -+ -+/* edma_assign_ath_hdr_type() -+ * assign atheros header eth type -+ */ -+void edma_assign_ath_hdr_type(int eth_type) -+{ -+ edma_ath_eth_type = eth_type & EDMA_ETH_TYPE_MASK; -+} -+ -+/* edma_get_default_vlan_tag() -+ * Used by other modules to get the default vlan tag -+ */ -+int edma_get_default_vlan_tag(struct net_device *netdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ if (adapter->default_vlan_tag) -+ return adapter->default_vlan_tag; -+ -+ return 0; -+} -+ -+/* edma_open() -+ * gets called when netdevice is up, start the queue. -+ */ -+int edma_open(struct net_device *netdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct platform_device *pdev = adapter->edma_cinfo->pdev; -+ -+ netif_tx_start_all_queues(netdev); -+ edma_initialise_rfs_flow_table(adapter); -+ set_bit(__EDMA_UP, &adapter->state_flags); -+ -+ /* if Link polling is enabled, in our case enabled for WAN, then -+ * do a phy start, else always set link as UP -+ */ -+ if (adapter->poll_required) { -+ if (!IS_ERR(adapter->phydev)) { -+ phy_start(adapter->phydev); -+ phy_start_aneg(adapter->phydev); -+ adapter->link_state = __EDMA_LINKDOWN; -+ } else { -+ dev_dbg(&pdev->dev, "Invalid PHY device for a link polled interface\n"); -+ } -+ } else { -+ adapter->link_state = __EDMA_LINKUP; -+ netif_carrier_on(netdev); -+ } -+ -+ return 0; -+} -+ -+ -+/* edma_close() -+ * gets called when netdevice is down, stops the queue. -+ */ -+int edma_close(struct net_device *netdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ edma_free_rfs_flow_table(adapter); -+ netif_carrier_off(netdev); -+ netif_tx_stop_all_queues(netdev); -+ -+ if (adapter->poll_required) { -+ if (!IS_ERR(adapter->phydev)) -+ phy_stop(adapter->phydev); -+ } -+ -+ adapter->link_state = __EDMA_LINKDOWN; -+ -+ /* Set GMAC state to UP before link state is checked -+ */ -+ clear_bit(__EDMA_UP, &adapter->state_flags); -+ -+ return 0; -+} -+ -+/* edma_poll -+ * polling function that gets called when the napi gets scheduled. -+ * -+ * Main sequence of task performed in this api -+ * is clear irq status -> clear_tx_irq -> clean_rx_irq-> -+ * enable interrupts. -+ */ -+int edma_poll(struct napi_struct *napi, int budget) -+{ -+ struct edma_per_cpu_queues_info *edma_percpu_info = container_of(napi, -+ struct edma_per_cpu_queues_info, napi); -+ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo; -+ u32 reg_data; -+ u32 shadow_rx_status, shadow_tx_status; -+ int queue_id; -+ int i, work_done = 0; -+ -+ /* Store the Rx/Tx status by ANDing it with -+ * appropriate CPU RX?TX mask -+ */ -+ edma_read_reg(EDMA_REG_RX_ISR, ®_data); -+ edma_percpu_info->rx_status |= reg_data & edma_percpu_info->rx_mask; -+ shadow_rx_status = edma_percpu_info->rx_status; -+ edma_read_reg(EDMA_REG_TX_ISR, ®_data); -+ edma_percpu_info->tx_status |= reg_data & edma_percpu_info->tx_mask; -+ shadow_tx_status = edma_percpu_info->tx_status; -+ -+ /* Every core will have a start, which will be computed -+ * in probe and stored in edma_percpu_info->tx_start variable. -+ * We will shift the status bit by tx_start to obtain -+ * status bits for the core on which the current processing -+ * is happening. Since, there are 4 tx queues per core, -+ * we will run the loop till we get the correct queue to clear. -+ */ -+ while (edma_percpu_info->tx_status) { -+ queue_id = ffs(edma_percpu_info->tx_status) - 1; -+ edma_tx_complete(edma_cinfo, queue_id); -+ edma_percpu_info->tx_status &= ~(1 << queue_id); -+ } -+ -+ /* Every core will have a start, which will be computed -+ * in probe and stored in edma_percpu_info->tx_start variable. -+ * We will shift the status bit by tx_start to obtain -+ * status bits for the core on which the current processing -+ * is happening. Since, there are 4 tx queues per core, we -+ * will run the loop till we get the correct queue to clear. -+ */ -+ while (edma_percpu_info->rx_status) { -+ queue_id = ffs(edma_percpu_info->rx_status) - 1; -+ edma_rx_complete(edma_cinfo, &work_done, -+ budget, queue_id, napi); -+ -+ if (likely(work_done < budget)) -+ edma_percpu_info->rx_status &= ~(1 << queue_id); -+ else -+ break; -+ } -+ -+ /* Clear the status register, to avoid the interrupts to -+ * reoccur.This clearing of interrupt status register is -+ * done here as writing to status register only takes place -+ * once the producer/consumer index has been updated to -+ * reflect that the packet transmission/reception went fine. -+ */ -+ edma_write_reg(EDMA_REG_RX_ISR, shadow_rx_status); -+ edma_write_reg(EDMA_REG_TX_ISR, shadow_tx_status); -+ -+ /* If budget not fully consumed, exit the polling mode */ -+ if (likely(work_done < budget)) { -+ napi_complete(napi); -+ -+ /* re-enable the interrupts */ -+ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++) -+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x1); -+ for (i = 0; i < edma_cinfo->num_txq_per_core; i++) -+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x1); -+ } -+ -+ return work_done; -+} -+ -+/* edma interrupt() -+ * interrupt handler -+ */ -+irqreturn_t edma_interrupt(int irq, void *dev) -+{ -+ struct edma_per_cpu_queues_info *edma_percpu_info = (struct edma_per_cpu_queues_info *) dev; -+ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo; -+ int i; -+ -+ /* Unmask the TX/RX interrupt register */ -+ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++) -+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x0); -+ -+ for (i = 0; i < edma_cinfo->num_txq_per_core; i++) -+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x0); -+ -+ napi_schedule(&edma_percpu_info->napi); -+ -+ return IRQ_HANDLED; -+} ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h -@@ -0,0 +1,447 @@ -+/* -+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#ifndef _EDMA_H_ -+#define _EDMA_H_ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "ess_edma.h" -+ -+#define EDMA_CPU_CORES_SUPPORTED 4 -+#define EDMA_MAX_PORTID_SUPPORTED 5 -+#define EDMA_MAX_VLAN_SUPPORTED EDMA_MAX_PORTID_SUPPORTED -+#define EDMA_MAX_PORTID_BITMAP_INDEX (EDMA_MAX_PORTID_SUPPORTED + 1) -+#define EDMA_MAX_PORTID_BITMAP_SUPPORTED 0x1f /* 0001_1111 = 0x1f */ -+#define EDMA_MAX_NETDEV_PER_QUEUE 4 /* 3 Netdev per queue, 1 space for indexing */ -+ -+#define EDMA_MAX_RECEIVE_QUEUE 8 -+#define EDMA_MAX_TRANSMIT_QUEUE 16 -+ -+/* WAN/LAN adapter number */ -+#define EDMA_WAN 0 -+#define EDMA_LAN 1 -+ -+/* VLAN tag */ -+#define EDMA_LAN_DEFAULT_VLAN 1 -+#define EDMA_WAN_DEFAULT_VLAN 2 -+ -+#define EDMA_DEFAULT_GROUP1_VLAN 1 -+#define EDMA_DEFAULT_GROUP2_VLAN 2 -+#define EDMA_DEFAULT_GROUP3_VLAN 3 -+#define EDMA_DEFAULT_GROUP4_VLAN 4 -+#define EDMA_DEFAULT_GROUP5_VLAN 5 -+ -+/* Queues exposed to linux kernel */ -+#define EDMA_NETDEV_TX_QUEUE 4 -+#define EDMA_NETDEV_RX_QUEUE 4 -+ -+/* Number of queues per core */ -+#define EDMA_NUM_TXQ_PER_CORE 4 -+#define EDMA_NUM_RXQ_PER_CORE 2 -+ -+#define EDMA_TPD_EOP_SHIFT 31 -+ -+#define EDMA_PORT_ID_SHIFT 12 -+#define EDMA_PORT_ID_MASK 0x7 -+ -+/* tpd word 3 bit 18-28 */ -+#define EDMA_TPD_PORT_BITMAP_SHIFT 18 -+ -+#define EDMA_TPD_FROM_CPU_SHIFT 25 -+ -+#define EDMA_FROM_CPU_MASK 0x80 -+#define EDMA_SKB_PRIORITY_MASK 0x38 -+ -+/* TX/RX descriptor ring count */ -+/* should be a power of 2 */ -+#define EDMA_RX_RING_SIZE 128 -+#define EDMA_TX_RING_SIZE 128 -+ -+/* Flags used in paged/non paged mode */ -+#define EDMA_RX_HEAD_BUFF_SIZE_JUMBO 256 -+#define EDMA_RX_HEAD_BUFF_SIZE 1540 -+ -+/* MAX frame size supported by switch */ -+#define EDMA_MAX_JUMBO_FRAME_SIZE 9216 -+ -+/* Configurations */ -+#define EDMA_INTR_CLEAR_TYPE 0 -+#define EDMA_INTR_SW_IDX_W_TYPE 0 -+#define EDMA_FIFO_THRESH_TYPE 0 -+#define EDMA_RSS_TYPE 0 -+#define EDMA_RX_IMT 0x0020 -+#define EDMA_TX_IMT 0x0050 -+#define EDMA_TPD_BURST 5 -+#define EDMA_TXF_BURST 0x100 -+#define EDMA_RFD_BURST 8 -+#define EDMA_RFD_THR 16 -+#define EDMA_RFD_LTHR 0 -+ -+/* RX/TX per CPU based mask/shift */ -+#define EDMA_TX_PER_CPU_MASK 0xF -+#define EDMA_RX_PER_CPU_MASK 0x3 -+#define EDMA_TX_PER_CPU_MASK_SHIFT 0x2 -+#define EDMA_RX_PER_CPU_MASK_SHIFT 0x1 -+#define EDMA_TX_CPU_START_SHIFT 0x2 -+#define EDMA_RX_CPU_START_SHIFT 0x1 -+ -+/* FLags used in transmit direction */ -+#define EDMA_HW_CHECKSUM 0x00000001 -+#define EDMA_VLAN_TX_TAG_INSERT_FLAG 0x00000002 -+#define EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG 0x00000004 -+ -+#define EDMA_SW_DESC_FLAG_LAST 0x1 -+#define EDMA_SW_DESC_FLAG_SKB_HEAD 0x2 -+#define EDMA_SW_DESC_FLAG_SKB_FRAG 0x4 -+#define EDMA_SW_DESC_FLAG_SKB_FRAGLIST 0x8 -+#define EDMA_SW_DESC_FLAG_SKB_NONE 0x10 -+#define EDMA_SW_DESC_FLAG_SKB_REUSE 0x20 -+ -+ -+#define EDMA_MAX_SKB_FRAGS (MAX_SKB_FRAGS + 1) -+ -+/* Ethtool specific list of EDMA supported features */ -+#define EDMA_SUPPORTED_FEATURES (SUPPORTED_10baseT_Half \ -+ | SUPPORTED_10baseT_Full \ -+ | SUPPORTED_100baseT_Half \ -+ | SUPPORTED_100baseT_Full \ -+ | SUPPORTED_1000baseT_Full) -+ -+/* Recevie side atheros Header */ -+#define EDMA_RX_ATH_HDR_VERSION 0x2 -+#define EDMA_RX_ATH_HDR_VERSION_SHIFT 14 -+#define EDMA_RX_ATH_HDR_PRIORITY_SHIFT 11 -+#define EDMA_RX_ATH_PORT_TYPE_SHIFT 6 -+#define EDMA_RX_ATH_HDR_RSTP_PORT_TYPE 0x4 -+ -+/* Transmit side atheros Header */ -+#define EDMA_TX_ATH_HDR_PORT_BITMAP_MASK 0x7F -+#define EDMA_TX_ATH_HDR_FROM_CPU_MASK 0x80 -+#define EDMA_TX_ATH_HDR_FROM_CPU_SHIFT 7 -+ -+#define EDMA_TXQ_START_CORE0 8 -+#define EDMA_TXQ_START_CORE1 12 -+#define EDMA_TXQ_START_CORE2 0 -+#define EDMA_TXQ_START_CORE3 4 -+ -+#define EDMA_TXQ_IRQ_MASK_CORE0 0x0F00 -+#define EDMA_TXQ_IRQ_MASK_CORE1 0xF000 -+#define EDMA_TXQ_IRQ_MASK_CORE2 0x000F -+#define EDMA_TXQ_IRQ_MASK_CORE3 0x00F0 -+ -+#define EDMA_ETH_HDR_LEN 12 -+#define EDMA_ETH_TYPE_MASK 0xFFFF -+ -+#define EDMA_RX_BUFFER_WRITE 16 -+#define EDMA_RFD_AVAIL_THR 80 -+ -+#define EDMA_GMAC_NO_MDIO_PHY PHY_MAX_ADDR -+ -+extern int ssdk_rfs_ipct_rule_set(__be32 ip_src, __be32 ip_dst, -+ __be16 sport, __be16 dport, -+ uint8_t proto, u16 loadbalance, bool action); -+struct edma_ethtool_statistics { -+ u32 tx_q0_pkt; -+ u32 tx_q1_pkt; -+ u32 tx_q2_pkt; -+ u32 tx_q3_pkt; -+ u32 tx_q4_pkt; -+ u32 tx_q5_pkt; -+ u32 tx_q6_pkt; -+ u32 tx_q7_pkt; -+ u32 tx_q8_pkt; -+ u32 tx_q9_pkt; -+ u32 tx_q10_pkt; -+ u32 tx_q11_pkt; -+ u32 tx_q12_pkt; -+ u32 tx_q13_pkt; -+ u32 tx_q14_pkt; -+ u32 tx_q15_pkt; -+ u32 tx_q0_byte; -+ u32 tx_q1_byte; -+ u32 tx_q2_byte; -+ u32 tx_q3_byte; -+ u32 tx_q4_byte; -+ u32 tx_q5_byte; -+ u32 tx_q6_byte; -+ u32 tx_q7_byte; -+ u32 tx_q8_byte; -+ u32 tx_q9_byte; -+ u32 tx_q10_byte; -+ u32 tx_q11_byte; -+ u32 tx_q12_byte; -+ u32 tx_q13_byte; -+ u32 tx_q14_byte; -+ u32 tx_q15_byte; -+ u32 rx_q0_pkt; -+ u32 rx_q1_pkt; -+ u32 rx_q2_pkt; -+ u32 rx_q3_pkt; -+ u32 rx_q4_pkt; -+ u32 rx_q5_pkt; -+ u32 rx_q6_pkt; -+ u32 rx_q7_pkt; -+ u32 rx_q0_byte; -+ u32 rx_q1_byte; -+ u32 rx_q2_byte; -+ u32 rx_q3_byte; -+ u32 rx_q4_byte; -+ u32 rx_q5_byte; -+ u32 rx_q6_byte; -+ u32 rx_q7_byte; -+ u32 tx_desc_error; -+}; -+ -+struct edma_mdio_data { -+ struct mii_bus *mii_bus; -+ void __iomem *membase; -+ int phy_irq[PHY_MAX_ADDR]; -+}; -+ -+/* EDMA LINK state */ -+enum edma_link_state { -+ __EDMA_LINKUP, /* Indicate link is UP */ -+ __EDMA_LINKDOWN /* Indicate link is down */ -+}; -+ -+/* EDMA GMAC state */ -+enum edma_gmac_state { -+ __EDMA_UP /* use to indicate GMAC is up */ -+}; -+ -+/* edma transmit descriptor */ -+struct edma_tx_desc { -+ __le16 len; /* full packet including CRC */ -+ __le16 svlan_tag; /* vlan tag */ -+ __le32 word1; /* byte 4-7 */ -+ __le32 addr; /* address of buffer */ -+ __le32 word3; /* byte 12 */ -+}; -+ -+/* edma receive return descriptor */ -+struct edma_rx_return_desc { -+ u16 rrd0; -+ u16 rrd1; -+ u16 rrd2; -+ u16 rrd3; -+ u16 rrd4; -+ u16 rrd5; -+ u16 rrd6; -+ u16 rrd7; -+}; -+ -+/* RFD descriptor */ -+struct edma_rx_free_desc { -+ __le32 buffer_addr; /* buffer address */ -+}; -+ -+/* edma hw specific data */ -+struct edma_hw { -+ u32 __iomem *hw_addr; /* inner register address */ -+ struct edma_adapter *adapter; /* netdevice adapter */ -+ u32 rx_intr_mask; /*rx interrupt mask */ -+ u32 tx_intr_mask; /* tx interrupt nask */ -+ u32 misc_intr_mask; /* misc interrupt mask */ -+ u32 wol_intr_mask; /* wake on lan interrupt mask */ -+ bool intr_clear_type; /* interrupt clear */ -+ bool intr_sw_idx_w; /* interrupt software index */ -+ u32 rx_head_buff_size; /* Rx buffer size */ -+ u8 rss_type; /* rss protocol type */ -+}; -+ -+/* edma_sw_desc stores software descriptor -+ * SW descriptor has 1:1 map with HW descriptor -+ */ -+struct edma_sw_desc { -+ struct sk_buff *skb; -+ dma_addr_t dma; /* dma address */ -+ u16 length; /* Tx/Rx buffer length */ -+ u32 flags; -+}; -+ -+/* per core related information */ -+struct edma_per_cpu_queues_info { -+ struct napi_struct napi; /* napi associated with the core */ -+ u32 tx_mask; /* tx interrupt mask */ -+ u32 rx_mask; /* rx interrupt mask */ -+ u32 tx_status; /* tx interrupt status */ -+ u32 rx_status; /* rx interrupt status */ -+ u32 tx_start; /* tx queue start */ -+ u32 rx_start; /* rx queue start */ -+ struct edma_common_info *edma_cinfo; /* edma common info */ -+}; -+ -+/* edma specific common info */ -+struct edma_common_info { -+ struct edma_tx_desc_ring *tpd_ring[16]; /* 16 Tx queues */ -+ struct edma_rfd_desc_ring *rfd_ring[8]; /* 8 Rx queues */ -+ struct platform_device *pdev; /* device structure */ -+ struct net_device *netdev[EDMA_MAX_PORTID_SUPPORTED]; -+ struct net_device *portid_netdev_lookup_tbl[EDMA_MAX_PORTID_BITMAP_INDEX]; -+ struct ctl_table_header *edma_ctl_table_hdr; -+ int num_gmac; -+ struct edma_ethtool_statistics edma_ethstats; /* ethtool stats */ -+ int num_rx_queues; /* number of rx queue */ -+ u32 num_tx_queues; /* number of tx queue */ -+ u32 tx_irq[16]; /* number of tx irq */ -+ u32 rx_irq[8]; /* number of rx irq */ -+ u32 from_cpu; /* from CPU TPD field */ -+ u32 num_rxq_per_core; /* Rx queues per core */ -+ u32 num_txq_per_core; /* Tx queues per core */ -+ u16 tx_ring_count; /* Tx ring count */ -+ u16 rx_ring_count; /* Rx ring*/ -+ u16 rx_head_buffer_len; /* rx buffer length */ -+ u16 rx_page_buffer_len; /* rx buffer length */ -+ u32 page_mode; /* Jumbo frame supported flag */ -+ u32 fraglist_mode; /* fraglist supported flag */ -+ struct edma_hw hw; /* edma hw specific structure */ -+ struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */ -+ spinlock_t stats_lock; /* protect edma stats area for updation */ -+}; -+ -+/* transimit packet descriptor (tpd) ring */ -+struct edma_tx_desc_ring { -+ struct netdev_queue *nq[EDMA_MAX_NETDEV_PER_QUEUE]; /* Linux queue index */ -+ struct net_device *netdev[EDMA_MAX_NETDEV_PER_QUEUE]; -+ /* Array of netdevs associated with the tpd ring */ -+ void *hw_desc; /* descriptor ring virtual address */ -+ struct edma_sw_desc *sw_desc; /* buffer associated with ring */ -+ int netdev_bmp; /* Bitmap for per-ring netdevs */ -+ u32 size; /* descriptor ring length in bytes */ -+ u16 count; /* number of descriptors in the ring */ -+ dma_addr_t dma; /* descriptor ring physical address */ -+ u16 sw_next_to_fill; /* next Tx descriptor to fill */ -+ u16 sw_next_to_clean; /* next Tx descriptor to clean */ -+}; -+ -+/* receive free descriptor (rfd) ring */ -+struct edma_rfd_desc_ring { -+ void *hw_desc; /* descriptor ring virtual address */ -+ struct edma_sw_desc *sw_desc; /* buffer associated with ring */ -+ u16 size; /* bytes allocated to sw_desc */ -+ u16 count; /* number of descriptors in the ring */ -+ dma_addr_t dma; /* descriptor ring physical address */ -+ u16 sw_next_to_fill; /* next descriptor to fill */ -+ u16 sw_next_to_clean; /* next descriptor to clean */ -+}; -+ -+/* edma_rfs_flter_node - rfs filter node in hash table */ -+struct edma_rfs_filter_node { -+ struct flow_keys keys; -+ u32 flow_id; /* flow_id of filter provided by kernel */ -+ u16 filter_id; /* filter id of filter returned by adaptor */ -+ u16 rq_id; /* desired rq index */ -+ struct hlist_node node; /* edma rfs list node */ -+}; -+ -+/* edma_rfs_flow_tbl - rfs flow table */ -+struct edma_rfs_flow_table { -+ u16 max_num_filter; /* Maximum number of filters edma supports */ -+ u16 hashtoclean; /* hash table index to clean next */ -+ int filter_available; /* Number of free filters available */ -+ struct hlist_head hlist_head[EDMA_RFS_FLOW_ENTRIES]; -+ spinlock_t rfs_ftab_lock; -+ struct timer_list expire_rfs; /* timer function for edma_rps_may_expire_flow */ -+}; -+ -+/* EDMA net device structure */ -+struct edma_adapter { -+ struct net_device *netdev; /* netdevice */ -+ struct platform_device *pdev; /* platform device */ -+ struct edma_common_info *edma_cinfo; /* edma common info */ -+ struct phy_device *phydev; /* Phy device */ -+ struct edma_rfs_flow_table rfs; /* edma rfs flow table */ -+ struct net_device_stats stats; /* netdev statistics */ -+ set_rfs_filter_callback_t set_rfs_rule; -+ u32 flags;/* status flags */ -+ unsigned long state_flags; /* GMAC up/down flags */ -+ u32 forced_speed; /* link force speed */ -+ u32 forced_duplex; /* link force duplex */ -+ u32 link_state; /* phy link state */ -+ u32 phy_mdio_addr; /* PHY device address on MII interface */ -+ u32 poll_required; /* check if link polling is required */ -+ u32 tx_start_offset[CONFIG_NR_CPUS]; /* tx queue start */ -+ u32 default_vlan_tag; /* vlan tag */ -+ u32 dp_bitmap; -+ uint8_t phy_id[MII_BUS_ID_SIZE + 3]; -+}; -+ -+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo); -+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo); -+int edma_open(struct net_device *netdev); -+int edma_close(struct net_device *netdev); -+void edma_free_tx_resources(struct edma_common_info *edma_c_info); -+void edma_free_rx_resources(struct edma_common_info *edma_c_info); -+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo); -+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo); -+void edma_free_tx_rings(struct edma_common_info *edma_cinfo); -+void edma_free_rx_rings(struct edma_common_info *edma_cinfo); -+void edma_free_queues(struct edma_common_info *edma_cinfo); -+void edma_irq_disable(struct edma_common_info *edma_cinfo); -+int edma_reset(struct edma_common_info *edma_cinfo); -+int edma_poll(struct napi_struct *napi, int budget); -+netdev_tx_t edma_xmit(struct sk_buff *skb, -+ struct net_device *netdev); -+int edma_configure(struct edma_common_info *edma_cinfo); -+void edma_irq_enable(struct edma_common_info *edma_cinfo); -+void edma_enable_tx_ctrl(struct edma_hw *hw); -+void edma_enable_rx_ctrl(struct edma_hw *hw); -+void edma_stop_rx_tx(struct edma_hw *hw); -+void edma_free_irqs(struct edma_adapter *adapter); -+irqreturn_t edma_interrupt(int irq, void *dev); -+void edma_write_reg(u16 reg_addr, u32 reg_value); -+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value); -+struct net_device_stats *edma_get_stats(struct net_device *netdev); -+int edma_set_mac_addr(struct net_device *netdev, void *p); -+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb, -+ u16 rxq, u32 flow_id); -+int edma_register_rfs_filter(struct net_device *netdev, -+ set_rfs_filter_callback_t set_filter); -+void edma_flow_may_expire(unsigned long data); -+void edma_set_ethtool_ops(struct net_device *netdev); -+int edma_change_mtu(struct net_device *netdev, int new_mtu); -+void edma_set_stp_rstp(bool tag); -+void edma_assign_ath_hdr_type(int tag); -+int edma_get_default_vlan_tag(struct net_device *netdev); -+void edma_adjust_link(struct net_device *netdev); -+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int qid, int num, int txq_id); -+void edma_read_append_stats(struct edma_common_info *edma_cinfo); -+void edma_change_tx_coalesce(int usecs); -+void edma_change_rx_coalesce(int usecs); -+void edma_get_tx_rx_coalesce(u32 *reg_val); -+void edma_clear_irq_status(void); -+#endif /* _EDMA_H_ */ ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c -@@ -0,0 +1,1220 @@ -+/* -+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include -+#include -+#include -+#include -+#include "edma.h" -+#include "ess_edma.h" -+ -+/* Weight round robin and virtual QID mask */ -+#define EDMA_WRR_VID_SCTL_MASK 0xffff -+ -+/* Weight round robin and virtual QID shift */ -+#define EDMA_WRR_VID_SCTL_SHIFT 16 -+ -+char edma_axi_driver_name[] = "ess_edma"; -+static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | -+ NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP; -+ -+static u32 edma_hw_addr; -+ -+struct timer_list edma_stats_timer; -+ -+char edma_tx_irq[16][64]; -+char edma_rx_irq[8][64]; -+struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED]; -+static u16 tx_start[4] = {EDMA_TXQ_START_CORE0, EDMA_TXQ_START_CORE1, -+ EDMA_TXQ_START_CORE2, EDMA_TXQ_START_CORE3}; -+static u32 tx_mask[4] = {EDMA_TXQ_IRQ_MASK_CORE0, EDMA_TXQ_IRQ_MASK_CORE1, -+ EDMA_TXQ_IRQ_MASK_CORE2, EDMA_TXQ_IRQ_MASK_CORE3}; -+ -+static u32 edma_default_ltag __read_mostly = EDMA_LAN_DEFAULT_VLAN; -+static u32 edma_default_wtag __read_mostly = EDMA_WAN_DEFAULT_VLAN; -+static u32 edma_default_group1_vtag __read_mostly = EDMA_DEFAULT_GROUP1_VLAN; -+static u32 edma_default_group2_vtag __read_mostly = EDMA_DEFAULT_GROUP2_VLAN; -+static u32 edma_default_group3_vtag __read_mostly = EDMA_DEFAULT_GROUP3_VLAN; -+static u32 edma_default_group4_vtag __read_mostly = EDMA_DEFAULT_GROUP4_VLAN; -+static u32 edma_default_group5_vtag __read_mostly = EDMA_DEFAULT_GROUP5_VLAN; -+static u32 edma_rss_idt_val = EDMA_RSS_IDT_VALUE; -+static u32 edma_rss_idt_idx; -+ -+static int edma_weight_assigned_to_q __read_mostly; -+static int edma_queue_to_virtual_q __read_mostly; -+static bool edma_enable_rstp __read_mostly; -+static int edma_athr_hdr_eth_type __read_mostly; -+ -+static int page_mode; -+module_param(page_mode, int, 0); -+MODULE_PARM_DESC(page_mode, "enable page mode"); -+ -+static int overwrite_mode; -+module_param(overwrite_mode, int, 0); -+MODULE_PARM_DESC(overwrite_mode, "overwrite default page_mode setting"); -+ -+static int jumbo_mru = EDMA_RX_HEAD_BUFF_SIZE; -+module_param(jumbo_mru, int, 0); -+MODULE_PARM_DESC(jumbo_mru, "enable fraglist support"); -+ -+static int num_rxq = 4; -+module_param(num_rxq, int, 0); -+MODULE_PARM_DESC(num_rxq, "change the number of rx queues"); -+ -+void edma_write_reg(u16 reg_addr, u32 reg_value) -+{ -+ writel(reg_value, ((void __iomem *)(edma_hw_addr + reg_addr))); -+} -+ -+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value) -+{ -+ *reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr)); -+} -+ -+/* edma_change_tx_coalesce() -+ * change tx interrupt moderation timer -+ */ -+void edma_change_tx_coalesce(int usecs) -+{ -+ u32 reg_value; -+ -+ /* Here, we right shift the value from the user by 1, this is -+ * done because IMT resolution timer is 2usecs. 1 count -+ * of this register corresponds to 2 usecs. -+ */ -+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, ®_value); -+ reg_value = ((reg_value & 0xffff) | ((usecs >> 1) << 16)); -+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value); -+} -+ -+/* edma_change_rx_coalesce() -+ * change rx interrupt moderation timer -+ */ -+void edma_change_rx_coalesce(int usecs) -+{ -+ u32 reg_value; -+ -+ /* Here, we right shift the value from the user by 1, this is -+ * done because IMT resolution timer is 2usecs. 1 count -+ * of this register corresponds to 2 usecs. -+ */ -+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, ®_value); -+ reg_value = ((reg_value & 0xffff0000) | (usecs >> 1)); -+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value); -+} -+ -+/* edma_get_tx_rx_coalesce() -+ * Get tx/rx interrupt moderation value -+ */ -+void edma_get_tx_rx_coalesce(u32 *reg_val) -+{ -+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_val); -+} -+ -+void edma_read_append_stats(struct edma_common_info *edma_cinfo) -+{ -+ uint32_t *p; -+ int i; -+ u32 stat; -+ -+ spin_lock(&edma_cinfo->stats_lock); -+ p = (uint32_t *)&(edma_cinfo->edma_ethstats); -+ -+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) { -+ edma_read_reg(EDMA_REG_TX_STAT_PKT_Q(i), &stat); -+ *p += stat; -+ p++; -+ } -+ -+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) { -+ edma_read_reg(EDMA_REG_TX_STAT_BYTE_Q(i), &stat); -+ *p += stat; -+ p++; -+ } -+ -+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) { -+ edma_read_reg(EDMA_REG_RX_STAT_PKT_Q(i), &stat); -+ *p += stat; -+ p++; -+ } -+ -+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) { -+ edma_read_reg(EDMA_REG_RX_STAT_BYTE_Q(i), &stat); -+ *p += stat; -+ p++; -+ } -+ -+ spin_unlock(&edma_cinfo->stats_lock); -+} -+ -+static void edma_statistics_timer(unsigned long data) -+{ -+ struct edma_common_info *edma_cinfo = (struct edma_common_info *)data; -+ -+ edma_read_append_stats(edma_cinfo); -+ -+ mod_timer(&edma_stats_timer, jiffies + 1*HZ); -+} -+ -+static int edma_enable_stp_rstp(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write) -+ edma_set_stp_rstp(edma_enable_rstp); -+ -+ return ret; -+} -+ -+static int edma_ath_hdr_eth_type(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write) -+ edma_assign_ath_hdr_type(edma_athr_hdr_eth_type); -+ -+ return ret; -+} -+ -+static int edma_change_default_lan_vlan(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ int ret; -+ -+ if (!edma_netdev[1]) { -+ pr_err("Netdevice for default_lan does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[1]); -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_ltag; -+ -+ return ret; -+} -+ -+static int edma_change_default_wan_vlan(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ int ret; -+ -+ if (!edma_netdev[0]) { -+ pr_err("Netdevice for default_wan does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[0]); -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_wtag; -+ -+ return ret; -+} -+ -+static int edma_change_group1_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[0]) { -+ pr_err("Netdevice for Group 1 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[0]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group1_vtag; -+ -+ return ret; -+} -+ -+static int edma_change_group2_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[1]) { -+ pr_err("Netdevice for Group 2 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[1]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group2_vtag; -+ -+ return ret; -+} -+ -+static int edma_change_group3_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[2]) { -+ pr_err("Netdevice for Group 3 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[2]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group3_vtag; -+ -+ return ret; -+} -+ -+static int edma_change_group4_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[3]) { -+ pr_err("Netdevice for Group 4 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[3]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group4_vtag; -+ -+ return ret; -+} -+ -+static int edma_change_group5_vtag(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ struct edma_adapter *adapter; -+ struct edma_common_info *edma_cinfo; -+ int ret; -+ -+ if (!edma_netdev[4]) { -+ pr_err("Netdevice for Group 5 does not exist\n"); -+ return -1; -+ } -+ -+ adapter = netdev_priv(edma_netdev[4]); -+ edma_cinfo = adapter->edma_cinfo; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ -+ if (write) -+ adapter->default_vlan_tag = edma_default_group5_vtag; -+ -+ return ret; -+} -+ -+static int edma_set_rss_idt_value(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write && !ret) -+ edma_write_reg(EDMA_REG_RSS_IDT(edma_rss_idt_idx), -+ edma_rss_idt_val); -+ return ret; -+} -+ -+static int edma_set_rss_idt_idx(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret; -+ u32 old_value = edma_rss_idt_idx; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (!write || ret) -+ return ret; -+ -+ if (edma_rss_idt_idx >= EDMA_NUM_IDT) { -+ pr_err("Invalid RSS indirection table index %d\n", -+ edma_rss_idt_idx); -+ edma_rss_idt_idx = old_value; -+ return -EINVAL; -+ } -+ return ret; -+} -+ -+static int edma_weight_assigned_to_queues(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret, queue_id, weight; -+ u32 reg_data, data, reg_addr; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write) { -+ queue_id = edma_weight_assigned_to_q & EDMA_WRR_VID_SCTL_MASK; -+ if (queue_id < 0 || queue_id > 15) { -+ pr_err("queue_id not within desired range\n"); -+ return -EINVAL; -+ } -+ -+ weight = edma_weight_assigned_to_q >> EDMA_WRR_VID_SCTL_SHIFT; -+ if (weight < 0 || weight > 0xF) { -+ pr_err("queue_id not within desired range\n"); -+ return -EINVAL; -+ } -+ -+ data = weight << EDMA_WRR_SHIFT(queue_id); -+ -+ reg_addr = EDMA_REG_WRR_CTRL_Q0_Q3 + (queue_id & ~0x3); -+ edma_read_reg(reg_addr, ®_data); -+ reg_data &= ~(1 << EDMA_WRR_SHIFT(queue_id)); -+ edma_write_reg(reg_addr, data | reg_data); -+ } -+ -+ return ret; -+} -+ -+static int edma_queue_to_virtual_queue_map(struct ctl_table *table, int write, -+ void __user *buffer, size_t *lenp, -+ loff_t *ppos) -+{ -+ int ret, queue_id, virtual_qid; -+ u32 reg_data, data, reg_addr; -+ -+ ret = proc_dointvec(table, write, buffer, lenp, ppos); -+ if (write) { -+ queue_id = edma_queue_to_virtual_q & EDMA_WRR_VID_SCTL_MASK; -+ if (queue_id < 0 || queue_id > 15) { -+ pr_err("queue_id not within desired range\n"); -+ return -EINVAL; -+ } -+ -+ virtual_qid = edma_queue_to_virtual_q >> -+ EDMA_WRR_VID_SCTL_SHIFT; -+ if (virtual_qid < 0 || virtual_qid > 8) { -+ pr_err("queue_id not within desired range\n"); -+ return -EINVAL; -+ } -+ -+ data = virtual_qid << EDMA_VQ_ID_SHIFT(queue_id); -+ -+ reg_addr = EDMA_REG_VQ_CTRL0 + (queue_id & ~0x3); -+ edma_read_reg(reg_addr, ®_data); -+ reg_data &= ~(1 << EDMA_VQ_ID_SHIFT(queue_id)); -+ edma_write_reg(reg_addr, data | reg_data); -+ } -+ -+ return ret; -+} -+ -+static struct ctl_table edma_table[] = { -+ { -+ .procname = "default_lan_tag", -+ .data = &edma_default_ltag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_default_lan_vlan -+ }, -+ { -+ .procname = "default_wan_tag", -+ .data = &edma_default_wtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_default_wan_vlan -+ }, -+ { -+ .procname = "weight_assigned_to_queues", -+ .data = &edma_weight_assigned_to_q, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_weight_assigned_to_queues -+ }, -+ { -+ .procname = "queue_to_virtual_queue_map", -+ .data = &edma_queue_to_virtual_q, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_queue_to_virtual_queue_map -+ }, -+ { -+ .procname = "enable_stp_rstp", -+ .data = &edma_enable_rstp, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_enable_stp_rstp -+ }, -+ { -+ .procname = "athr_hdr_eth_type", -+ .data = &edma_athr_hdr_eth_type, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_ath_hdr_eth_type -+ }, -+ { -+ .procname = "default_group1_vlan_tag", -+ .data = &edma_default_group1_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group1_vtag -+ }, -+ { -+ .procname = "default_group2_vlan_tag", -+ .data = &edma_default_group2_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group2_vtag -+ }, -+ { -+ .procname = "default_group3_vlan_tag", -+ .data = &edma_default_group3_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group3_vtag -+ }, -+ { -+ .procname = "default_group4_vlan_tag", -+ .data = &edma_default_group4_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group4_vtag -+ }, -+ { -+ .procname = "default_group5_vlan_tag", -+ .data = &edma_default_group5_vtag, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_change_group5_vtag -+ }, -+ { -+ .procname = "edma_rss_idt_value", -+ .data = &edma_rss_idt_val, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_set_rss_idt_value -+ }, -+ { -+ .procname = "edma_rss_idt_idx", -+ .data = &edma_rss_idt_idx, -+ .maxlen = sizeof(int), -+ .mode = 0644, -+ .proc_handler = edma_set_rss_idt_idx -+ }, -+ {} -+}; -+ -+/* edma_axi_netdev_ops -+ * Describe the operations supported by registered netdevices -+ * -+ * static const struct net_device_ops edma_axi_netdev_ops = { -+ * .ndo_open = edma_open, -+ * .ndo_stop = edma_close, -+ * .ndo_start_xmit = edma_xmit_frame, -+ * .ndo_set_mac_address = edma_set_mac_addr, -+ * } -+ */ -+static const struct net_device_ops edma_axi_netdev_ops = { -+ .ndo_open = edma_open, -+ .ndo_stop = edma_close, -+ .ndo_start_xmit = edma_xmit, -+ .ndo_set_mac_address = edma_set_mac_addr, -+#ifdef CONFIG_RFS_ACCEL -+ .ndo_rx_flow_steer = edma_rx_flow_steer, -+ .ndo_register_rfs_filter = edma_register_rfs_filter, -+ .ndo_get_default_vlan_tag = edma_get_default_vlan_tag, -+#endif -+ .ndo_get_stats = edma_get_stats, -+ .ndo_change_mtu = edma_change_mtu, -+}; -+ -+/* edma_axi_probe() -+ * Initialise an adapter identified by a platform_device structure. -+ * -+ * The OS initialization, configuring of the adapter private structure, -+ * and a hardware reset occur in the probe. -+ */ -+static int edma_axi_probe(struct platform_device *pdev) -+{ -+ struct edma_common_info *edma_cinfo; -+ struct edma_hw *hw; -+ struct edma_adapter *adapter[EDMA_MAX_PORTID_SUPPORTED]; -+ struct resource *res; -+ struct device_node *np = pdev->dev.of_node; -+ struct device_node *pnp; -+ struct device_node *mdio_node = NULL; -+ struct platform_device *mdio_plat = NULL; -+ struct mii_bus *miibus = NULL; -+ struct edma_mdio_data *mdio_data = NULL; -+ int i, j, k, err = 0; -+ int portid_bmp; -+ int idx = 0, idx_mac = 0; -+ -+ if (CONFIG_NR_CPUS != EDMA_CPU_CORES_SUPPORTED) { -+ dev_err(&pdev->dev, "Invalid CPU Cores\n"); -+ return -EINVAL; -+ } -+ -+ if ((num_rxq != 4) && (num_rxq != 8)) { -+ dev_err(&pdev->dev, "Invalid RX queue, edma probe failed\n"); -+ return -EINVAL; -+ } -+ edma_cinfo = kzalloc(sizeof(struct edma_common_info), GFP_KERNEL); -+ if (!edma_cinfo) { -+ err = -ENOMEM; -+ goto err_alloc; -+ } -+ -+ edma_cinfo->pdev = pdev; -+ -+ of_property_read_u32(np, "qcom,num_gmac", &edma_cinfo->num_gmac); -+ if (edma_cinfo->num_gmac > EDMA_MAX_PORTID_SUPPORTED) { -+ pr_err("Invalid DTSI Entry for qcom,num_gmac\n"); -+ err = -EINVAL; -+ goto err_cinfo; -+ } -+ -+ /* Initialize the netdev array before allocation -+ * to avoid double free -+ */ -+ for (i = 0 ; i < edma_cinfo->num_gmac ; i++) -+ edma_netdev[i] = NULL; -+ -+ for (i = 0 ; i < edma_cinfo->num_gmac ; i++) { -+ edma_netdev[i] = alloc_etherdev_mqs(sizeof(struct edma_adapter), -+ EDMA_NETDEV_TX_QUEUE, EDMA_NETDEV_RX_QUEUE); -+ -+ if (!edma_netdev[i]) { -+ dev_err(&pdev->dev, -+ "net device alloc fails for index=%d\n", i); -+ err = -ENODEV; -+ goto err_ioremap; -+ } -+ -+ SET_NETDEV_DEV(edma_netdev[i], &pdev->dev); -+ platform_set_drvdata(pdev, edma_netdev[i]); -+ edma_cinfo->netdev[i] = edma_netdev[i]; -+ } -+ -+ /* Fill ring details */ -+ edma_cinfo->num_tx_queues = EDMA_MAX_TRANSMIT_QUEUE; -+ edma_cinfo->num_txq_per_core = (EDMA_MAX_TRANSMIT_QUEUE / 4); -+ edma_cinfo->tx_ring_count = EDMA_TX_RING_SIZE; -+ -+ /* Update num rx queues based on module parameter */ -+ edma_cinfo->num_rx_queues = num_rxq; -+ edma_cinfo->num_rxq_per_core = ((num_rxq == 4) ? 1 : 2); -+ -+ edma_cinfo->rx_ring_count = EDMA_RX_RING_SIZE; -+ -+ hw = &edma_cinfo->hw; -+ -+ /* Fill HW defaults */ -+ hw->tx_intr_mask = EDMA_TX_IMR_NORMAL_MASK; -+ hw->rx_intr_mask = EDMA_RX_IMR_NORMAL_MASK; -+ -+ of_property_read_u32(np, "qcom,page-mode", &edma_cinfo->page_mode); -+ of_property_read_u32(np, "qcom,rx_head_buf_size", -+ &hw->rx_head_buff_size); -+ -+ if (overwrite_mode) { -+ dev_info(&pdev->dev, "page mode overwritten"); -+ edma_cinfo->page_mode = page_mode; -+ } -+ -+ if (jumbo_mru) -+ edma_cinfo->fraglist_mode = 1; -+ -+ if (edma_cinfo->page_mode) -+ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE_JUMBO; -+ else if (edma_cinfo->fraglist_mode) -+ hw->rx_head_buff_size = jumbo_mru; -+ else if (!hw->rx_head_buff_size) -+ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE; -+ -+ hw->misc_intr_mask = 0; -+ hw->wol_intr_mask = 0; -+ -+ hw->intr_clear_type = EDMA_INTR_CLEAR_TYPE; -+ hw->intr_sw_idx_w = EDMA_INTR_SW_IDX_W_TYPE; -+ -+ /* configure RSS type to the different protocol that can be -+ * supported -+ */ -+ hw->rss_type = EDMA_RSS_TYPE_IPV4TCP | EDMA_RSS_TYPE_IPV6_TCP | -+ EDMA_RSS_TYPE_IPV4_UDP | EDMA_RSS_TYPE_IPV6UDP | -+ EDMA_RSS_TYPE_IPV4 | EDMA_RSS_TYPE_IPV6; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ -+ edma_cinfo->hw.hw_addr = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(edma_cinfo->hw.hw_addr)) { -+ err = PTR_ERR(edma_cinfo->hw.hw_addr); -+ goto err_ioremap; -+ } -+ -+ edma_hw_addr = (u32)edma_cinfo->hw.hw_addr; -+ -+ /* Parse tx queue interrupt number from device tree */ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) -+ edma_cinfo->tx_irq[i] = platform_get_irq(pdev, i); -+ -+ /* Parse rx queue interrupt number from device tree -+ * Here we are setting j to point to the point where we -+ * left tx interrupt parsing(i.e 16) and run run the loop -+ * from 0 to 7 to parse rx interrupt number. -+ */ -+ for (i = 0, j = edma_cinfo->num_tx_queues, k = 0; -+ i < edma_cinfo->num_rx_queues; i++) { -+ edma_cinfo->rx_irq[k] = platform_get_irq(pdev, j); -+ k += ((num_rxq == 4) ? 2 : 1); -+ j += ((num_rxq == 4) ? 2 : 1); -+ } -+ -+ edma_cinfo->rx_head_buffer_len = edma_cinfo->hw.rx_head_buff_size; -+ edma_cinfo->rx_page_buffer_len = PAGE_SIZE; -+ -+ err = edma_alloc_queues_tx(edma_cinfo); -+ if (err) { -+ dev_err(&pdev->dev, "Allocation of TX queue failed\n"); -+ goto err_tx_qinit; -+ } -+ -+ err = edma_alloc_queues_rx(edma_cinfo); -+ if (err) { -+ dev_err(&pdev->dev, "Allocation of RX queue failed\n"); -+ goto err_rx_qinit; -+ } -+ -+ err = edma_alloc_tx_rings(edma_cinfo); -+ if (err) { -+ dev_err(&pdev->dev, "Allocation of TX resources failed\n"); -+ goto err_tx_rinit; -+ } -+ -+ err = edma_alloc_rx_rings(edma_cinfo); -+ if (err) { -+ dev_err(&pdev->dev, "Allocation of RX resources failed\n"); -+ goto err_rx_rinit; -+ } -+ -+ /* Initialize netdev and netdev bitmap for transmit descriptor rings */ -+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { -+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[i]; -+ int j; -+ -+ etdr->netdev_bmp = 0; -+ for (j = 0; j < EDMA_MAX_NETDEV_PER_QUEUE; j++) { -+ etdr->netdev[j] = NULL; -+ etdr->nq[j] = NULL; -+ } -+ } -+ -+ if (of_property_read_bool(np, "qcom,mdio_supported")) { -+ mdio_node = of_find_compatible_node(NULL, NULL, -+ "qcom,ipq4019-mdio"); -+ if (!mdio_node) { -+ dev_err(&pdev->dev, "cannot find mdio node by phandle"); -+ err = -EIO; -+ goto err_mdiobus_init_fail; -+ } -+ -+ mdio_plat = of_find_device_by_node(mdio_node); -+ if (!mdio_plat) { -+ dev_err(&pdev->dev, -+ "cannot find platform device from mdio node"); -+ of_node_put(mdio_node); -+ err = -EIO; -+ goto err_mdiobus_init_fail; -+ } -+ -+ mdio_data = dev_get_drvdata(&mdio_plat->dev); -+ if (!mdio_data) { -+ dev_err(&pdev->dev, -+ "cannot get mii bus reference from device data"); -+ of_node_put(mdio_node); -+ err = -EIO; -+ goto err_mdiobus_init_fail; -+ } -+ -+ miibus = mdio_data->mii_bus; -+ } -+ -+ for_each_available_child_of_node(np, pnp) { -+ const char *mac_addr; -+ -+ /* this check is needed if parent and daughter dts have -+ * different number of gmac nodes -+ */ -+ if (idx_mac == edma_cinfo->num_gmac) { -+ of_node_put(np); -+ break; -+ } -+ -+ mac_addr = of_get_mac_address(pnp); -+ if (mac_addr) -+ memcpy(edma_netdev[idx_mac]->dev_addr, mac_addr, ETH_ALEN); -+ -+ idx_mac++; -+ } -+ -+ /* Populate the adapter structure register the netdevice */ -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ int k, m; -+ -+ adapter[i] = netdev_priv(edma_netdev[i]); -+ adapter[i]->netdev = edma_netdev[i]; -+ adapter[i]->pdev = pdev; -+ for (j = 0; j < CONFIG_NR_CPUS; j++) { -+ m = i % 2; -+ adapter[i]->tx_start_offset[j] = -+ ((j << EDMA_TX_CPU_START_SHIFT) + (m << 1)); -+ /* Share the queues with available net-devices. -+ * For instance , with 5 net-devices -+ * eth0/eth2/eth4 will share q0,q1,q4,q5,q8,q9,q12,q13 -+ * and eth1/eth3 will get the remaining. -+ */ -+ for (k = adapter[i]->tx_start_offset[j]; k < -+ (adapter[i]->tx_start_offset[j] + 2); k++) { -+ if (edma_fill_netdev(edma_cinfo, k, i, j)) { -+ pr_err("Netdev overflow Error\n"); -+ goto err_register; -+ } -+ } -+ } -+ -+ adapter[i]->edma_cinfo = edma_cinfo; -+ edma_netdev[i]->netdev_ops = &edma_axi_netdev_ops; -+ edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM -+ | NETIF_F_HW_VLAN_CTAG_TX -+ | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG | -+ NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GRO; -+ edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM | -+ NETIF_F_HW_VLAN_CTAG_RX -+ | NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | -+ NETIF_F_GRO; -+ edma_netdev[i]->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG | -+ NETIF_F_TSO | NETIF_F_TSO6 | -+ NETIF_F_GRO; -+ edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG | -+ NETIF_F_TSO | NETIF_F_TSO6 | -+ NETIF_F_GRO; -+ -+#ifdef CONFIG_RFS_ACCEL -+ edma_netdev[i]->features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; -+ edma_netdev[i]->hw_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; -+ edma_netdev[i]->vlan_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; -+ edma_netdev[i]->wanted_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; -+#endif -+ edma_set_ethtool_ops(edma_netdev[i]); -+ -+ /* This just fill in some default MAC address -+ */ -+ if (!is_valid_ether_addr(edma_netdev[i]->dev_addr)) { -+ random_ether_addr(edma_netdev[i]->dev_addr); -+ pr_info("EDMA using MAC@ - using"); -+ pr_info("%02x:%02x:%02x:%02x:%02x:%02x\n", -+ *(edma_netdev[i]->dev_addr), -+ *(edma_netdev[i]->dev_addr + 1), -+ *(edma_netdev[i]->dev_addr + 2), -+ *(edma_netdev[i]->dev_addr + 3), -+ *(edma_netdev[i]->dev_addr + 4), -+ *(edma_netdev[i]->dev_addr + 5)); -+ } -+ -+ err = register_netdev(edma_netdev[i]); -+ if (err) -+ goto err_register; -+ -+ /* carrier off reporting is important to -+ * ethtool even BEFORE open -+ */ -+ netif_carrier_off(edma_netdev[i]); -+ -+ /* Allocate reverse irq cpu mapping structure for -+ * receive queues -+ */ -+#ifdef CONFIG_RFS_ACCEL -+ edma_netdev[i]->rx_cpu_rmap = -+ alloc_irq_cpu_rmap(EDMA_NETDEV_RX_QUEUE); -+ if (!edma_netdev[i]->rx_cpu_rmap) { -+ err = -ENOMEM; -+ goto err_rmap_alloc_fail; -+ } -+#endif -+ } -+ -+ for (i = 0; i < EDMA_MAX_PORTID_BITMAP_INDEX; i++) -+ edma_cinfo->portid_netdev_lookup_tbl[i] = NULL; -+ -+ for_each_available_child_of_node(np, pnp) { -+ const uint32_t *vlan_tag = NULL; -+ int len; -+ -+ /* this check is needed if parent and daughter dts have -+ * different number of gmac nodes -+ */ -+ if (idx == edma_cinfo->num_gmac) -+ break; -+ -+ /* Populate port-id to netdev lookup table */ -+ vlan_tag = of_get_property(pnp, "vlan_tag", &len); -+ if (!vlan_tag) { -+ pr_err("Vlan tag parsing Failed.\n"); -+ goto err_rmap_alloc_fail; -+ } -+ -+ adapter[idx]->default_vlan_tag = of_read_number(vlan_tag, 1); -+ vlan_tag++; -+ portid_bmp = of_read_number(vlan_tag, 1); -+ adapter[idx]->dp_bitmap = portid_bmp; -+ -+ portid_bmp = portid_bmp >> 1; /* We ignore CPU Port bit 0 */ -+ while (portid_bmp) { -+ int port_bit = ffs(portid_bmp); -+ -+ if (port_bit > EDMA_MAX_PORTID_SUPPORTED) -+ goto err_rmap_alloc_fail; -+ edma_cinfo->portid_netdev_lookup_tbl[port_bit] = -+ edma_netdev[idx]; -+ portid_bmp &= ~(1 << (port_bit - 1)); -+ } -+ -+ if (!of_property_read_u32(pnp, "qcom,poll_required", -+ &adapter[idx]->poll_required)) { -+ if (adapter[idx]->poll_required) { -+ of_property_read_u32(pnp, "qcom,phy_mdio_addr", -+ &adapter[idx]->phy_mdio_addr); -+ of_property_read_u32(pnp, "qcom,forced_speed", -+ &adapter[idx]->forced_speed); -+ of_property_read_u32(pnp, "qcom,forced_duplex", -+ &adapter[idx]->forced_duplex); -+ -+ /* create a phyid using MDIO bus id -+ * and MDIO bus address -+ */ -+ snprintf(adapter[idx]->phy_id, -+ MII_BUS_ID_SIZE + 3, PHY_ID_FMT, -+ miibus->id, -+ adapter[idx]->phy_mdio_addr); -+ } -+ } else { -+ adapter[idx]->poll_required = 0; -+ adapter[idx]->forced_speed = SPEED_1000; -+ adapter[idx]->forced_duplex = DUPLEX_FULL; -+ } -+ -+ idx++; -+ } -+ -+ edma_cinfo->edma_ctl_table_hdr = register_net_sysctl(&init_net, -+ "net/edma", -+ edma_table); -+ if (!edma_cinfo->edma_ctl_table_hdr) { -+ dev_err(&pdev->dev, "edma sysctl table hdr not registered\n"); -+ goto err_unregister_sysctl_tbl; -+ } -+ -+ /* Disable all 16 Tx and 8 rx irqs */ -+ edma_irq_disable(edma_cinfo); -+ -+ err = edma_reset(edma_cinfo); -+ if (err) { -+ err = -EIO; -+ goto err_reset; -+ } -+ -+ /* populate per_core_info, do a napi_Add, request 16 TX irqs, -+ * 8 RX irqs, do a napi enable -+ */ -+ for (i = 0; i < CONFIG_NR_CPUS; i++) { -+ u8 rx_start; -+ -+ edma_cinfo->edma_percpu_info[i].napi.state = 0; -+ -+ netif_napi_add(edma_netdev[0], -+ &edma_cinfo->edma_percpu_info[i].napi, -+ edma_poll, 64); -+ napi_enable(&edma_cinfo->edma_percpu_info[i].napi); -+ edma_cinfo->edma_percpu_info[i].tx_mask = tx_mask[i]; -+ edma_cinfo->edma_percpu_info[i].rx_mask = EDMA_RX_PER_CPU_MASK -+ << (i << EDMA_RX_PER_CPU_MASK_SHIFT); -+ edma_cinfo->edma_percpu_info[i].tx_start = tx_start[i]; -+ edma_cinfo->edma_percpu_info[i].rx_start = -+ i << EDMA_RX_CPU_START_SHIFT; -+ rx_start = i << EDMA_RX_CPU_START_SHIFT; -+ edma_cinfo->edma_percpu_info[i].tx_status = 0; -+ edma_cinfo->edma_percpu_info[i].rx_status = 0; -+ edma_cinfo->edma_percpu_info[i].edma_cinfo = edma_cinfo; -+ -+ /* Request irq per core */ -+ for (j = edma_cinfo->edma_percpu_info[i].tx_start; -+ j < tx_start[i] + 4; j++) { -+ sprintf(&edma_tx_irq[j][0], "edma_eth_tx%d", j); -+ err = request_irq(edma_cinfo->tx_irq[j], -+ edma_interrupt, -+ 0, -+ &edma_tx_irq[j][0], -+ &edma_cinfo->edma_percpu_info[i]); -+ if (err) -+ goto err_reset; -+ } -+ -+ for (j = edma_cinfo->edma_percpu_info[i].rx_start; -+ j < (rx_start + -+ ((edma_cinfo->num_rx_queues == 4) ? 1 : 2)); -+ j++) { -+ sprintf(&edma_rx_irq[j][0], "edma_eth_rx%d", j); -+ err = request_irq(edma_cinfo->rx_irq[j], -+ edma_interrupt, -+ 0, -+ &edma_rx_irq[j][0], -+ &edma_cinfo->edma_percpu_info[i]); -+ if (err) -+ goto err_reset; -+ } -+ -+#ifdef CONFIG_RFS_ACCEL -+ for (j = edma_cinfo->edma_percpu_info[i].rx_start; -+ j < rx_start + 2; j += 2) { -+ err = irq_cpu_rmap_add(edma_netdev[0]->rx_cpu_rmap, -+ edma_cinfo->rx_irq[j]); -+ if (err) -+ goto err_rmap_add_fail; -+ } -+#endif -+ } -+ -+ /* Used to clear interrupt status, allocate rx buffer, -+ * configure edma descriptors registers -+ */ -+ err = edma_configure(edma_cinfo); -+ if (err) { -+ err = -EIO; -+ goto err_configure; -+ } -+ -+ /* Configure RSS indirection table. -+ * 128 hash will be configured in the following -+ * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively -+ * and so on -+ */ -+ for (i = 0; i < EDMA_NUM_IDT; i++) -+ edma_write_reg(EDMA_REG_RSS_IDT(i), EDMA_RSS_IDT_VALUE); -+ -+ /* Configure load balance mapping table. -+ * 4 table entry will be configured according to the -+ * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4} -+ * respectively. -+ */ -+ edma_write_reg(EDMA_REG_LB_RING, EDMA_LB_REG_VALUE); -+ -+ /* Configure Virtual queue for Tx rings -+ * User can also change this value runtime through -+ * a sysctl -+ */ -+ edma_write_reg(EDMA_REG_VQ_CTRL0, EDMA_VQ_REG_VALUE); -+ edma_write_reg(EDMA_REG_VQ_CTRL1, EDMA_VQ_REG_VALUE); -+ -+ /* Configure Max AXI Burst write size to 128 bytes*/ -+ edma_write_reg(EDMA_REG_AXIW_CTRL_MAXWRSIZE, -+ EDMA_AXIW_MAXWRSIZE_VALUE); -+ -+ /* Enable All 16 tx and 8 rx irq mask */ -+ edma_irq_enable(edma_cinfo); -+ edma_enable_tx_ctrl(&edma_cinfo->hw); -+ edma_enable_rx_ctrl(&edma_cinfo->hw); -+ -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ if (adapter[i]->poll_required) { -+ adapter[i]->phydev = -+ phy_connect(edma_netdev[i], -+ (const char *)adapter[i]->phy_id, -+ &edma_adjust_link, -+ PHY_INTERFACE_MODE_SGMII); -+ if (IS_ERR(adapter[i]->phydev)) { -+ dev_dbg(&pdev->dev, "PHY attach FAIL"); -+ err = -EIO; -+ goto edma_phy_attach_fail; -+ } else { -+ adapter[i]->phydev->advertising |= -+ ADVERTISED_Pause | -+ ADVERTISED_Asym_Pause; -+ adapter[i]->phydev->supported |= -+ SUPPORTED_Pause | -+ SUPPORTED_Asym_Pause; -+ } -+ } else { -+ adapter[i]->phydev = NULL; -+ } -+ } -+ -+ spin_lock_init(&edma_cinfo->stats_lock); -+ -+ init_timer(&edma_stats_timer); -+ edma_stats_timer.expires = jiffies + 1*HZ; -+ edma_stats_timer.data = (unsigned long)edma_cinfo; -+ edma_stats_timer.function = edma_statistics_timer; /* timer handler */ -+ add_timer(&edma_stats_timer); -+ -+ return 0; -+ -+edma_phy_attach_fail: -+ miibus = NULL; -+err_configure: -+#ifdef CONFIG_RFS_ACCEL -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ free_irq_cpu_rmap(adapter[i]->netdev->rx_cpu_rmap); -+ adapter[i]->netdev->rx_cpu_rmap = NULL; -+ } -+#endif -+err_rmap_add_fail: -+ edma_free_irqs(adapter[0]); -+ for (i = 0; i < CONFIG_NR_CPUS; i++) -+ napi_disable(&edma_cinfo->edma_percpu_info[i].napi); -+err_reset: -+err_unregister_sysctl_tbl: -+err_rmap_alloc_fail: -+ for (i = 0; i < edma_cinfo->num_gmac; i++) -+ unregister_netdev(edma_netdev[i]); -+err_register: -+err_mdiobus_init_fail: -+ edma_free_rx_rings(edma_cinfo); -+err_rx_rinit: -+ edma_free_tx_rings(edma_cinfo); -+err_tx_rinit: -+ edma_free_queues(edma_cinfo); -+err_rx_qinit: -+err_tx_qinit: -+ iounmap(edma_cinfo->hw.hw_addr); -+err_ioremap: -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ if (edma_netdev[i]) -+ free_netdev(edma_netdev[i]); -+ } -+err_cinfo: -+ kfree(edma_cinfo); -+err_alloc: -+ return err; -+} -+ -+/* edma_axi_remove() -+ * Device Removal Routine -+ * -+ * edma_axi_remove is called by the platform subsystem to alert the driver -+ * that it should release a platform device. -+ */ -+static int edma_axi_remove(struct platform_device *pdev) -+{ -+ struct edma_adapter *adapter = netdev_priv(edma_netdev[0]); -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ struct edma_hw *hw = &edma_cinfo->hw; -+ int i; -+ -+ for (i = 0; i < edma_cinfo->num_gmac; i++) -+ unregister_netdev(edma_netdev[i]); -+ -+ edma_stop_rx_tx(hw); -+ for (i = 0; i < CONFIG_NR_CPUS; i++) -+ napi_disable(&edma_cinfo->edma_percpu_info[i].napi); -+ -+ edma_irq_disable(edma_cinfo); -+ edma_write_reg(EDMA_REG_RX_ISR, 0xff); -+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff); -+#ifdef CONFIG_RFS_ACCEL -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ free_irq_cpu_rmap(edma_netdev[i]->rx_cpu_rmap); -+ edma_netdev[i]->rx_cpu_rmap = NULL; -+ } -+#endif -+ -+ for (i = 0; i < edma_cinfo->num_gmac; i++) { -+ struct edma_adapter *adapter = netdev_priv(edma_netdev[i]); -+ -+ if (adapter->phydev) -+ phy_disconnect(adapter->phydev); -+ } -+ -+ del_timer_sync(&edma_stats_timer); -+ edma_free_irqs(adapter); -+ unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr); -+ edma_free_tx_resources(edma_cinfo); -+ edma_free_rx_resources(edma_cinfo); -+ edma_free_tx_rings(edma_cinfo); -+ edma_free_rx_rings(edma_cinfo); -+ edma_free_queues(edma_cinfo); -+ for (i = 0; i < edma_cinfo->num_gmac; i++) -+ free_netdev(edma_netdev[i]); -+ -+ kfree(edma_cinfo); -+ -+ return 0; -+} -+ -+static const struct of_device_id edma_of_mtable[] = { -+ {.compatible = "qcom,ess-edma" }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, edma_of_mtable); -+ -+static struct platform_driver edma_axi_driver = { -+ .driver = { -+ .name = edma_axi_driver_name, -+ .of_match_table = edma_of_mtable, -+ }, -+ .probe = edma_axi_probe, -+ .remove = edma_axi_remove, -+}; -+ -+module_platform_driver(edma_axi_driver); -+ -+MODULE_AUTHOR("Qualcomm Atheros Inc"); -+MODULE_DESCRIPTION("QCA ESS EDMA driver"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c -@@ -0,0 +1,374 @@ -+/* -+ * Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#include -+#include -+#include -+#include "edma.h" -+ -+struct edma_ethtool_stats { -+ uint8_t stat_string[ETH_GSTRING_LEN]; -+ uint32_t stat_offset; -+}; -+ -+#define EDMA_STAT(m) offsetof(struct edma_ethtool_statistics, m) -+#define DRVINFO_LEN 32 -+ -+/* Array of strings describing statistics -+ */ -+static const struct edma_ethtool_stats edma_gstrings_stats[] = { -+ {"tx_q0_pkt", EDMA_STAT(tx_q0_pkt)}, -+ {"tx_q1_pkt", EDMA_STAT(tx_q1_pkt)}, -+ {"tx_q2_pkt", EDMA_STAT(tx_q2_pkt)}, -+ {"tx_q3_pkt", EDMA_STAT(tx_q3_pkt)}, -+ {"tx_q4_pkt", EDMA_STAT(tx_q4_pkt)}, -+ {"tx_q5_pkt", EDMA_STAT(tx_q5_pkt)}, -+ {"tx_q6_pkt", EDMA_STAT(tx_q6_pkt)}, -+ {"tx_q7_pkt", EDMA_STAT(tx_q7_pkt)}, -+ {"tx_q8_pkt", EDMA_STAT(tx_q8_pkt)}, -+ {"tx_q9_pkt", EDMA_STAT(tx_q9_pkt)}, -+ {"tx_q10_pkt", EDMA_STAT(tx_q10_pkt)}, -+ {"tx_q11_pkt", EDMA_STAT(tx_q11_pkt)}, -+ {"tx_q12_pkt", EDMA_STAT(tx_q12_pkt)}, -+ {"tx_q13_pkt", EDMA_STAT(tx_q13_pkt)}, -+ {"tx_q14_pkt", EDMA_STAT(tx_q14_pkt)}, -+ {"tx_q15_pkt", EDMA_STAT(tx_q15_pkt)}, -+ {"tx_q0_byte", EDMA_STAT(tx_q0_byte)}, -+ {"tx_q1_byte", EDMA_STAT(tx_q1_byte)}, -+ {"tx_q2_byte", EDMA_STAT(tx_q2_byte)}, -+ {"tx_q3_byte", EDMA_STAT(tx_q3_byte)}, -+ {"tx_q4_byte", EDMA_STAT(tx_q4_byte)}, -+ {"tx_q5_byte", EDMA_STAT(tx_q5_byte)}, -+ {"tx_q6_byte", EDMA_STAT(tx_q6_byte)}, -+ {"tx_q7_byte", EDMA_STAT(tx_q7_byte)}, -+ {"tx_q8_byte", EDMA_STAT(tx_q8_byte)}, -+ {"tx_q9_byte", EDMA_STAT(tx_q9_byte)}, -+ {"tx_q10_byte", EDMA_STAT(tx_q10_byte)}, -+ {"tx_q11_byte", EDMA_STAT(tx_q11_byte)}, -+ {"tx_q12_byte", EDMA_STAT(tx_q12_byte)}, -+ {"tx_q13_byte", EDMA_STAT(tx_q13_byte)}, -+ {"tx_q14_byte", EDMA_STAT(tx_q14_byte)}, -+ {"tx_q15_byte", EDMA_STAT(tx_q15_byte)}, -+ {"rx_q0_pkt", EDMA_STAT(rx_q0_pkt)}, -+ {"rx_q1_pkt", EDMA_STAT(rx_q1_pkt)}, -+ {"rx_q2_pkt", EDMA_STAT(rx_q2_pkt)}, -+ {"rx_q3_pkt", EDMA_STAT(rx_q3_pkt)}, -+ {"rx_q4_pkt", EDMA_STAT(rx_q4_pkt)}, -+ {"rx_q5_pkt", EDMA_STAT(rx_q5_pkt)}, -+ {"rx_q6_pkt", EDMA_STAT(rx_q6_pkt)}, -+ {"rx_q7_pkt", EDMA_STAT(rx_q7_pkt)}, -+ {"rx_q0_byte", EDMA_STAT(rx_q0_byte)}, -+ {"rx_q1_byte", EDMA_STAT(rx_q1_byte)}, -+ {"rx_q2_byte", EDMA_STAT(rx_q2_byte)}, -+ {"rx_q3_byte", EDMA_STAT(rx_q3_byte)}, -+ {"rx_q4_byte", EDMA_STAT(rx_q4_byte)}, -+ {"rx_q5_byte", EDMA_STAT(rx_q5_byte)}, -+ {"rx_q6_byte", EDMA_STAT(rx_q6_byte)}, -+ {"rx_q7_byte", EDMA_STAT(rx_q7_byte)}, -+ {"tx_desc_error", EDMA_STAT(tx_desc_error)}, -+}; -+ -+#define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats) -+ -+/* edma_get_strset_count() -+ * Get strset count -+ */ -+static int edma_get_strset_count(struct net_device *netdev, -+ int sset) -+{ -+ switch (sset) { -+ case ETH_SS_STATS: -+ return EDMA_STATS_LEN; -+ default: -+ netdev_dbg(netdev, "%s: Invalid string set", __func__); -+ return -EOPNOTSUPP; -+ } -+} -+ -+ -+/* edma_get_strings() -+ * get stats string -+ */ -+static void edma_get_strings(struct net_device *netdev, uint32_t stringset, -+ uint8_t *data) -+{ -+ uint8_t *p = data; -+ uint32_t i; -+ -+ switch (stringset) { -+ case ETH_SS_STATS: -+ for (i = 0; i < EDMA_STATS_LEN; i++) { -+ memcpy(p, edma_gstrings_stats[i].stat_string, -+ min((size_t)ETH_GSTRING_LEN, -+ strlen(edma_gstrings_stats[i].stat_string) -+ + 1)); -+ p += ETH_GSTRING_LEN; -+ } -+ break; -+ } -+} -+ -+/* edma_get_ethtool_stats() -+ * Get ethtool statistics -+ */ -+static void edma_get_ethtool_stats(struct net_device *netdev, -+ struct ethtool_stats *stats, uint64_t *data) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ int i; -+ uint8_t *p = NULL; -+ -+ edma_read_append_stats(edma_cinfo); -+ -+ for(i = 0; i < EDMA_STATS_LEN; i++) { -+ p = (uint8_t *)&(edma_cinfo->edma_ethstats) + -+ edma_gstrings_stats[i].stat_offset; -+ data[i] = *(uint32_t *)p; -+ } -+} -+ -+/* edma_get_drvinfo() -+ * get edma driver info -+ */ -+static void edma_get_drvinfo(struct net_device *dev, -+ struct ethtool_drvinfo *info) -+{ -+ strlcpy(info->driver, "ess_edma", DRVINFO_LEN); -+ strlcpy(info->bus_info, "axi", ETHTOOL_BUSINFO_LEN); -+} -+ -+/* edma_nway_reset() -+ * Reset the phy, if available. -+ */ -+static int edma_nway_reset(struct net_device *netdev) -+{ -+ return -EINVAL; -+} -+ -+/* edma_get_wol() -+ * get wake on lan info -+ */ -+static void edma_get_wol(struct net_device *netdev, -+ struct ethtool_wolinfo *wol) -+{ -+ wol->supported = 0; -+ wol->wolopts = 0; -+} -+ -+/* edma_get_msglevel() -+ * get message level. -+ */ -+static uint32_t edma_get_msglevel(struct net_device *netdev) -+{ -+ return 0; -+} -+ -+/* edma_get_settings() -+ * Get edma settings -+ */ -+static int edma_get_settings(struct net_device *netdev, -+ struct ethtool_cmd *ecmd) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ -+ if (adapter->poll_required) { -+ struct phy_device *phydev = NULL; -+ uint16_t phyreg; -+ -+ if ((adapter->forced_speed != SPEED_UNKNOWN) -+ && !(adapter->poll_required)) -+ return -EPERM; -+ -+ phydev = adapter->phydev; -+ -+ ecmd->advertising = phydev->advertising; -+ ecmd->autoneg = phydev->autoneg; -+ -+ if (adapter->link_state == __EDMA_LINKDOWN) { -+ ecmd->speed = SPEED_UNKNOWN; -+ ecmd->duplex = DUPLEX_UNKNOWN; -+ } else { -+ ecmd->speed = phydev->speed; -+ ecmd->duplex = phydev->duplex; -+ } -+ -+ ecmd->phy_address = adapter->phy_mdio_addr; -+ -+ phyreg = (uint16_t)phy_read(adapter->phydev, MII_LPA); -+ if (phyreg & LPA_10HALF) -+ ecmd->lp_advertising |= ADVERTISED_10baseT_Half; -+ -+ if (phyreg & LPA_10FULL) -+ ecmd->lp_advertising |= ADVERTISED_10baseT_Full; -+ -+ if (phyreg & LPA_100HALF) -+ ecmd->lp_advertising |= ADVERTISED_100baseT_Half; -+ -+ if (phyreg & LPA_100FULL) -+ ecmd->lp_advertising |= ADVERTISED_100baseT_Full; -+ -+ phyreg = (uint16_t)phy_read(adapter->phydev, MII_STAT1000); -+ if (phyreg & LPA_1000HALF) -+ ecmd->lp_advertising |= ADVERTISED_1000baseT_Half; -+ -+ if (phyreg & LPA_1000FULL) -+ ecmd->lp_advertising |= ADVERTISED_1000baseT_Full; -+ } else { -+ /* If the speed/duplex for this GMAC is forced and we -+ * are not polling for link state changes, return the -+ * values as specified by platform. This will be true -+ * for GMACs connected to switch, and interfaces that -+ * do not use a PHY. -+ */ -+ if (!(adapter->poll_required)) { -+ if (adapter->forced_speed != SPEED_UNKNOWN) { -+ /* set speed and duplex */ -+ ethtool_cmd_speed_set(ecmd, SPEED_1000); -+ ecmd->duplex = DUPLEX_FULL; -+ -+ /* Populate capabilities advertised by self */ -+ ecmd->advertising = 0; -+ ecmd->autoneg = 0; -+ ecmd->port = PORT_TP; -+ ecmd->transceiver = XCVR_EXTERNAL; -+ } else { -+ /* non link polled and non -+ * forced speed/duplex interface -+ */ -+ return -EIO; -+ } -+ } -+ } -+ -+ return 0; -+} -+ -+/* edma_set_settings() -+ * Set EDMA settings -+ */ -+static int edma_set_settings(struct net_device *netdev, -+ struct ethtool_cmd *ecmd) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct phy_device *phydev = NULL; -+ -+ if ((adapter->forced_speed != SPEED_UNKNOWN) && -+ !adapter->poll_required) -+ return -EPERM; -+ -+ phydev = adapter->phydev; -+ phydev->advertising = ecmd->advertising; -+ phydev->autoneg = ecmd->autoneg; -+ phydev->speed = ethtool_cmd_speed(ecmd); -+ phydev->duplex = ecmd->duplex; -+ -+ genphy_config_aneg(phydev); -+ -+ return 0; -+} -+ -+/* edma_get_coalesce -+ * get interrupt mitigation -+ */ -+static int edma_get_coalesce(struct net_device *netdev, -+ struct ethtool_coalesce *ec) -+{ -+ u32 reg_val; -+ -+ edma_get_tx_rx_coalesce(®_val); -+ -+ /* We read the Interrupt Moderation Timer(IMT) register value, -+ * use lower 16 bit for rx and higher 16 bit for Tx. We do a -+ * left shift by 1, because IMT resolution timer is 2usecs. -+ * Hence the value given by the register is multiplied by 2 to -+ * get the actual time in usecs. -+ */ -+ ec->tx_coalesce_usecs = (((reg_val >> 16) & 0xffff) << 1); -+ ec->rx_coalesce_usecs = ((reg_val & 0xffff) << 1); -+ -+ return 0; -+} -+ -+/* edma_set_coalesce -+ * set interrupt mitigation -+ */ -+static int edma_set_coalesce(struct net_device *netdev, -+ struct ethtool_coalesce *ec) -+{ -+ if (ec->tx_coalesce_usecs) -+ edma_change_tx_coalesce(ec->tx_coalesce_usecs); -+ if (ec->rx_coalesce_usecs) -+ edma_change_rx_coalesce(ec->rx_coalesce_usecs); -+ -+ return 0; -+} -+ -+/* edma_set_priv_flags() -+ * Set EDMA private flags -+ */ -+static int edma_set_priv_flags(struct net_device *netdev, u32 flags) -+{ -+ return 0; -+} -+ -+/* edma_get_priv_flags() -+ * get edma driver flags -+ */ -+static u32 edma_get_priv_flags(struct net_device *netdev) -+{ -+ return 0; -+} -+ -+/* edma_get_ringparam() -+ * get ring size -+ */ -+static void edma_get_ringparam(struct net_device *netdev, -+ struct ethtool_ringparam *ring) -+{ -+ struct edma_adapter *adapter = netdev_priv(netdev); -+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; -+ -+ ring->tx_max_pending = edma_cinfo->tx_ring_count; -+ ring->rx_max_pending = edma_cinfo->rx_ring_count; -+} -+ -+/* Ethtool operations -+ */ -+static const struct ethtool_ops edma_ethtool_ops = { -+ .get_drvinfo = &edma_get_drvinfo, -+ .get_link = ðtool_op_get_link, -+ .get_msglevel = &edma_get_msglevel, -+ .nway_reset = &edma_nway_reset, -+ .get_wol = &edma_get_wol, -+ .get_settings = &edma_get_settings, -+ .set_settings = &edma_set_settings, -+ .get_strings = &edma_get_strings, -+ .get_sset_count = &edma_get_strset_count, -+ .get_ethtool_stats = &edma_get_ethtool_stats, -+ .get_coalesce = &edma_get_coalesce, -+ .set_coalesce = &edma_set_coalesce, -+ .get_priv_flags = edma_get_priv_flags, -+ .set_priv_flags = edma_set_priv_flags, -+ .get_ringparam = edma_get_ringparam, -+}; -+ -+/* edma_set_ethtool_ops -+ * Set ethtool operations -+ */ -+void edma_set_ethtool_ops(struct net_device *netdev) -+{ -+ netdev->ethtool_ops = &edma_ethtool_ops; -+} ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h -@@ -0,0 +1,332 @@ -+/* -+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for -+ * any purpose with or without fee is hereby granted, provided that the -+ * above copyright notice and this permission notice appear in all copies. -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#ifndef _ESS_EDMA_H_ -+#define _ESS_EDMA_H_ -+ -+#include -+ -+struct edma_adapter; -+struct edma_hw; -+ -+/* register definition */ -+#define EDMA_REG_MAS_CTRL 0x0 -+#define EDMA_REG_TIMEOUT_CTRL 0x004 -+#define EDMA_REG_DBG0 0x008 -+#define EDMA_REG_DBG1 0x00C -+#define EDMA_REG_SW_CTRL0 0x100 -+#define EDMA_REG_SW_CTRL1 0x104 -+ -+/* Interrupt Status Register */ -+#define EDMA_REG_RX_ISR 0x200 -+#define EDMA_REG_TX_ISR 0x208 -+#define EDMA_REG_MISC_ISR 0x210 -+#define EDMA_REG_WOL_ISR 0x218 -+ -+#define EDMA_MISC_ISR_RX_URG_Q(x) (1 << x) -+ -+#define EDMA_MISC_ISR_AXIR_TIMEOUT 0x00000100 -+#define EDMA_MISC_ISR_AXIR_ERR 0x00000200 -+#define EDMA_MISC_ISR_TXF_DEAD 0x00000400 -+#define EDMA_MISC_ISR_AXIW_ERR 0x00000800 -+#define EDMA_MISC_ISR_AXIW_TIMEOUT 0x00001000 -+ -+#define EDMA_WOL_ISR 0x00000001 -+ -+/* Interrupt Mask Register */ -+#define EDMA_REG_MISC_IMR 0x214 -+#define EDMA_REG_WOL_IMR 0x218 -+ -+#define EDMA_RX_IMR_NORMAL_MASK 0x1 -+#define EDMA_TX_IMR_NORMAL_MASK 0x1 -+#define EDMA_MISC_IMR_NORMAL_MASK 0x80001FFF -+#define EDMA_WOL_IMR_NORMAL_MASK 0x1 -+ -+/* Edma receive consumer index */ -+#define EDMA_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */ -+/* Edma transmit consumer index */ -+#define EDMA_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */ -+ -+/* IRQ Moderator Initial Timer Register */ -+#define EDMA_REG_IRQ_MODRT_TIMER_INIT 0x280 -+#define EDMA_IRQ_MODRT_TIMER_MASK 0xFFFF -+#define EDMA_IRQ_MODRT_RX_TIMER_SHIFT 0 -+#define EDMA_IRQ_MODRT_TX_TIMER_SHIFT 16 -+ -+/* Interrupt Control Register */ -+#define EDMA_REG_INTR_CTRL 0x284 -+#define EDMA_INTR_CLR_TYP_SHIFT 0 -+#define EDMA_INTR_SW_IDX_W_TYP_SHIFT 1 -+#define EDMA_INTR_CLEAR_TYPE_W1 0 -+#define EDMA_INTR_CLEAR_TYPE_R 1 -+ -+/* RX Interrupt Mask Register */ -+#define EDMA_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */ -+ -+/* TX Interrupt mask register */ -+#define EDMA_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */ -+ -+/* Load Ptr Register -+ * Software sets this bit after the initialization of the head and tail -+ */ -+#define EDMA_REG_TX_SRAM_PART 0x400 -+#define EDMA_LOAD_PTR_SHIFT 16 -+ -+/* TXQ Control Register */ -+#define EDMA_REG_TXQ_CTRL 0x404 -+#define EDMA_TXQ_CTRL_IP_OPTION_EN 0x10 -+#define EDMA_TXQ_CTRL_TXQ_EN 0x20 -+#define EDMA_TXQ_CTRL_ENH_MODE 0x40 -+#define EDMA_TXQ_CTRL_LS_8023_EN 0x80 -+#define EDMA_TXQ_CTRL_TPD_BURST_EN 0x100 -+#define EDMA_TXQ_CTRL_LSO_BREAK_EN 0x200 -+#define EDMA_TXQ_NUM_TPD_BURST_MASK 0xF -+#define EDMA_TXQ_TXF_BURST_NUM_MASK 0xFFFF -+#define EDMA_TXQ_NUM_TPD_BURST_SHIFT 0 -+#define EDMA_TXQ_TXF_BURST_NUM_SHIFT 16 -+ -+#define EDMA_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */ -+#define EDMA_TXF_WATER_MARK_MASK 0x0FFF -+#define EDMA_TXF_LOW_WATER_MARK_SHIFT 0 -+#define EDMA_TXF_HIGH_WATER_MARK_SHIFT 16 -+#define EDMA_TXQ_CTRL_BURST_MODE_EN 0x80000000 -+ -+/* WRR Control Register */ -+#define EDMA_REG_WRR_CTRL_Q0_Q3 0x40c -+#define EDMA_REG_WRR_CTRL_Q4_Q7 0x410 -+#define EDMA_REG_WRR_CTRL_Q8_Q11 0x414 -+#define EDMA_REG_WRR_CTRL_Q12_Q15 0x418 -+ -+/* Weight round robin(WRR), it takes queue as input, and computes -+ * starting bits where we need to write the weight for a particular -+ * queue -+ */ -+#define EDMA_WRR_SHIFT(x) (((x) * 5) % 20) -+ -+/* Tx Descriptor Control Register */ -+#define EDMA_REG_TPD_RING_SIZE 0x41C -+#define EDMA_TPD_RING_SIZE_SHIFT 0 -+#define EDMA_TPD_RING_SIZE_MASK 0xFFFF -+ -+/* Transmit descriptor base address */ -+#define EDMA_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */ -+ -+/* TPD Index Register */ -+#define EDMA_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */ -+ -+#define EDMA_TPD_PROD_IDX_BITS 0x0000FFFF -+#define EDMA_TPD_CONS_IDX_BITS 0xFFFF0000 -+#define EDMA_TPD_PROD_IDX_MASK 0xFFFF -+#define EDMA_TPD_CONS_IDX_MASK 0xFFFF -+#define EDMA_TPD_PROD_IDX_SHIFT 0 -+#define EDMA_TPD_CONS_IDX_SHIFT 16 -+ -+/* TX Virtual Queue Mapping Control Register */ -+#define EDMA_REG_VQ_CTRL0 0x4A0 -+#define EDMA_REG_VQ_CTRL1 0x4A4 -+ -+/* Virtual QID shift, it takes queue as input, and computes -+ * Virtual QID position in virtual qid control register -+ */ -+#define EDMA_VQ_ID_SHIFT(i) (((i) * 3) % 24) -+ -+/* Virtual Queue Default Value */ -+#define EDMA_VQ_REG_VALUE 0x240240 -+ -+/* Tx side Port Interface Control Register */ -+#define EDMA_REG_PORT_CTRL 0x4A8 -+#define EDMA_PAD_EN_SHIFT 15 -+ -+/* Tx side VLAN Configuration Register */ -+#define EDMA_REG_VLAN_CFG 0x4AC -+ -+#define EDMA_TX_CVLAN 16 -+#define EDMA_TX_INS_CVLAN 17 -+#define EDMA_TX_CVLAN_TAG_SHIFT 0 -+ -+#define EDMA_TX_SVLAN 14 -+#define EDMA_TX_INS_SVLAN 15 -+#define EDMA_TX_SVLAN_TAG_SHIFT 16 -+ -+/* Tx Queue Packet Statistic Register */ -+#define EDMA_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */ -+ -+#define EDMA_TX_STAT_PKT_MASK 0xFFFFFF -+ -+/* Tx Queue Byte Statistic Register */ -+#define EDMA_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */ -+ -+/* Load Balance Based Ring Offset Register */ -+#define EDMA_REG_LB_RING 0x800 -+#define EDMA_LB_RING_ENTRY_MASK 0xff -+#define EDMA_LB_RING_ID_MASK 0x7 -+#define EDMA_LB_RING_PROFILE_ID_MASK 0x3 -+#define EDMA_LB_RING_ENTRY_BIT_OFFSET 8 -+#define EDMA_LB_RING_ID_OFFSET 0 -+#define EDMA_LB_RING_PROFILE_ID_OFFSET 3 -+#define EDMA_LB_REG_VALUE 0x6040200 -+ -+/* Load Balance Priority Mapping Register */ -+#define EDMA_REG_LB_PRI_START 0x804 -+#define EDMA_REG_LB_PRI_END 0x810 -+#define EDMA_LB_PRI_REG_INC 4 -+#define EDMA_LB_PRI_ENTRY_BIT_OFFSET 4 -+#define EDMA_LB_PRI_ENTRY_MASK 0xf -+ -+/* RSS Priority Mapping Register */ -+#define EDMA_REG_RSS_PRI 0x820 -+#define EDMA_RSS_PRI_ENTRY_MASK 0xf -+#define EDMA_RSS_RING_ID_MASK 0x7 -+#define EDMA_RSS_PRI_ENTRY_BIT_OFFSET 4 -+ -+/* RSS Indirection Register */ -+#define EDMA_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */ -+#define EDMA_NUM_IDT 16 -+#define EDMA_RSS_IDT_VALUE 0x64206420 -+ -+/* Default RSS Ring Register */ -+#define EDMA_REG_DEF_RSS 0x890 -+#define EDMA_DEF_RSS_MASK 0x7 -+ -+/* RSS Hash Function Type Register */ -+#define EDMA_REG_RSS_TYPE 0x894 -+#define EDMA_RSS_TYPE_NONE 0x01 -+#define EDMA_RSS_TYPE_IPV4TCP 0x02 -+#define EDMA_RSS_TYPE_IPV6_TCP 0x04 -+#define EDMA_RSS_TYPE_IPV4_UDP 0x08 -+#define EDMA_RSS_TYPE_IPV6UDP 0x10 -+#define EDMA_RSS_TYPE_IPV4 0x20 -+#define EDMA_RSS_TYPE_IPV6 0x40 -+#define EDMA_RSS_HASH_MODE_MASK 0x7f -+ -+#define EDMA_REG_RSS_HASH_VALUE 0x8C0 -+ -+#define EDMA_REG_RSS_TYPE_RESULT 0x8C4 -+ -+#define EDMA_HASH_TYPE_START 0 -+#define EDMA_HASH_TYPE_END 5 -+#define EDMA_HASH_TYPE_SHIFT 12 -+ -+#define EDMA_RFS_FLOW_ENTRIES 1024 -+#define EDMA_RFS_FLOW_ENTRIES_MASK (EDMA_RFS_FLOW_ENTRIES - 1) -+#define EDMA_RFS_EXPIRE_COUNT_PER_CALL 128 -+ -+/* RFD Base Address Register */ -+#define EDMA_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */ -+ -+/* RFD Index Register */ -+#define EDMA_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2)) -+ -+#define EDMA_RFD_PROD_IDX_BITS 0x00000FFF -+#define EDMA_RFD_CONS_IDX_BITS 0x0FFF0000 -+#define EDMA_RFD_PROD_IDX_MASK 0xFFF -+#define EDMA_RFD_CONS_IDX_MASK 0xFFF -+#define EDMA_RFD_PROD_IDX_SHIFT 0 -+#define EDMA_RFD_CONS_IDX_SHIFT 16 -+ -+/* Rx Descriptor Control Register */ -+#define EDMA_REG_RX_DESC0 0xA10 -+#define EDMA_RFD_RING_SIZE_MASK 0xFFF -+#define EDMA_RX_BUF_SIZE_MASK 0xFFFF -+#define EDMA_RFD_RING_SIZE_SHIFT 0 -+#define EDMA_RX_BUF_SIZE_SHIFT 16 -+ -+#define EDMA_REG_RX_DESC1 0xA14 -+#define EDMA_RXQ_RFD_BURST_NUM_MASK 0x3F -+#define EDMA_RXQ_RFD_PF_THRESH_MASK 0x1F -+#define EDMA_RXQ_RFD_LOW_THRESH_MASK 0xFFF -+#define EDMA_RXQ_RFD_BURST_NUM_SHIFT 0 -+#define EDMA_RXQ_RFD_PF_THRESH_SHIFT 8 -+#define EDMA_RXQ_RFD_LOW_THRESH_SHIFT 16 -+ -+/* RXQ Control Register */ -+#define EDMA_REG_RXQ_CTRL 0xA18 -+#define EDMA_FIFO_THRESH_TYPE_SHIF 0 -+#define EDMA_FIFO_THRESH_128_BYTE 0x0 -+#define EDMA_FIFO_THRESH_64_BYTE 0x1 -+#define EDMA_RXQ_CTRL_RMV_VLAN 0x00000002 -+#define EDMA_RXQ_CTRL_EN 0x0000FF00 -+ -+/* AXI Burst Size Config */ -+#define EDMA_REG_AXIW_CTRL_MAXWRSIZE 0xA1C -+#define EDMA_AXIW_MAXWRSIZE_VALUE 0x0 -+ -+/* Rx Statistics Register */ -+#define EDMA_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */ -+#define EDMA_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */ -+ -+/* WoL Pattern Length Register */ -+#define EDMA_REG_WOL_PATTERN_LEN0 0xC00 -+#define EDMA_WOL_PT_LEN_MASK 0xFF -+#define EDMA_WOL_PT0_LEN_SHIFT 0 -+#define EDMA_WOL_PT1_LEN_SHIFT 8 -+#define EDMA_WOL_PT2_LEN_SHIFT 16 -+#define EDMA_WOL_PT3_LEN_SHIFT 24 -+ -+#define EDMA_REG_WOL_PATTERN_LEN1 0xC04 -+#define EDMA_WOL_PT4_LEN_SHIFT 0 -+#define EDMA_WOL_PT5_LEN_SHIFT 8 -+#define EDMA_WOL_PT6_LEN_SHIFT 16 -+ -+/* WoL Control Register */ -+#define EDMA_REG_WOL_CTRL 0xC08 -+#define EDMA_WOL_WK_EN 0x00000001 -+#define EDMA_WOL_MG_EN 0x00000002 -+#define EDMA_WOL_PT0_EN 0x00000004 -+#define EDMA_WOL_PT1_EN 0x00000008 -+#define EDMA_WOL_PT2_EN 0x00000010 -+#define EDMA_WOL_PT3_EN 0x00000020 -+#define EDMA_WOL_PT4_EN 0x00000040 -+#define EDMA_WOL_PT5_EN 0x00000080 -+#define EDMA_WOL_PT6_EN 0x00000100 -+ -+/* MAC Control Register */ -+#define EDMA_REG_MAC_CTRL0 0xC20 -+#define EDMA_REG_MAC_CTRL1 0xC24 -+ -+/* WoL Pattern Register */ -+#define EDMA_REG_WOL_PATTERN_START 0x5000 -+#define EDMA_PATTERN_PART_REG_OFFSET 0x40 -+ -+ -+/* TX descriptor fields */ -+#define EDMA_TPD_HDR_SHIFT 0 -+#define EDMA_TPD_PPPOE_EN 0x00000100 -+#define EDMA_TPD_IP_CSUM_EN 0x00000200 -+#define EDMA_TPD_TCP_CSUM_EN 0x0000400 -+#define EDMA_TPD_UDP_CSUM_EN 0x00000800 -+#define EDMA_TPD_CUSTOM_CSUM_EN 0x00000C00 -+#define EDMA_TPD_LSO_EN 0x00001000 -+#define EDMA_TPD_LSO_V2_EN 0x00002000 -+#define EDMA_TPD_IPV4_EN 0x00010000 -+#define EDMA_TPD_MSS_MASK 0x1FFF -+#define EDMA_TPD_MSS_SHIFT 18 -+#define EDMA_TPD_CUSTOM_CSUM_SHIFT 18 -+ -+/* RRD descriptor fields */ -+#define EDMA_RRD_NUM_RFD_MASK 0x000F -+#define EDMA_RRD_SVLAN 0x8000 -+#define EDMA_RRD_FLOW_COOKIE_MASK 0x07FF; -+ -+#define EDMA_RRD_PKT_SIZE_MASK 0x3FFF -+#define EDMA_RRD_CSUM_FAIL_MASK 0xC000 -+#define EDMA_RRD_CVLAN 0x0001 -+#define EDMA_RRD_DESC_VALID 0x8000 -+ -+#define EDMA_RRD_PRIORITY_SHIFT 4 -+#define EDMA_RRD_PRIORITY_MASK 0x7 -+#define EDMA_RRD_PORT_TYPE_SHIFT 7 -+#define EDMA_RRD_PORT_TYPE_MASK 0x1F -+#endif /* _ESS_EDMA_H_ */ diff --git a/target/linux/ipq806x/patches-4.9/711-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq806x/patches-4.9/711-dts-ipq4019-add-ethernet-essedma-node.patch deleted file mode 100644 index 771ff22753c3..000000000000 --- a/target/linux/ipq806x/patches-4.9/711-dts-ipq4019-add-ethernet-essedma-node.patch +++ /dev/null @@ -1,92 +0,0 @@ -From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 20 Nov 2016 01:01:10 +0100 -Subject: [PATCH] dts: ipq4019: add ethernet essedma node - -This patch adds the device-tree node for the ethernet -interfaces. - -Note: The driver isn't anywhere close to be upstream, -so the info might change. - -Signed-off-by: Christian Lamparter ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++ - 1 file changed, 60 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -26,6 +26,8 @@ - aliases { - spi0 = &spi_0; - i2c0 = &i2c_0; -+ ethernet0 = &gmac0; -+ ethernet1 = &gmac1; - }; - - cpus { -@@ -366,6 +368,64 @@ - status = "disabled"; - }; - -+ edma@c080000 { -+ compatible = "qcom,ess-edma"; -+ reg = <0xc080000 0x8000>; -+ qcom,page-mode = <0>; -+ qcom,rx_head_buf_size = <1540>; -+ qcom,mdio_supported; -+ qcom,poll_required = <1>; -+ qcom,num_gmac = <2>; -+ interrupts = <0 65 IRQ_TYPE_EDGE_RISING -+ 0 66 IRQ_TYPE_EDGE_RISING -+ 0 67 IRQ_TYPE_EDGE_RISING -+ 0 68 IRQ_TYPE_EDGE_RISING -+ 0 69 IRQ_TYPE_EDGE_RISING -+ 0 70 IRQ_TYPE_EDGE_RISING -+ 0 71 IRQ_TYPE_EDGE_RISING -+ 0 72 IRQ_TYPE_EDGE_RISING -+ 0 73 IRQ_TYPE_EDGE_RISING -+ 0 74 IRQ_TYPE_EDGE_RISING -+ 0 75 IRQ_TYPE_EDGE_RISING -+ 0 76 IRQ_TYPE_EDGE_RISING -+ 0 77 IRQ_TYPE_EDGE_RISING -+ 0 78 IRQ_TYPE_EDGE_RISING -+ 0 79 IRQ_TYPE_EDGE_RISING -+ 0 80 IRQ_TYPE_EDGE_RISING -+ 0 240 IRQ_TYPE_EDGE_RISING -+ 0 241 IRQ_TYPE_EDGE_RISING -+ 0 242 IRQ_TYPE_EDGE_RISING -+ 0 243 IRQ_TYPE_EDGE_RISING -+ 0 244 IRQ_TYPE_EDGE_RISING -+ 0 245 IRQ_TYPE_EDGE_RISING -+ 0 246 IRQ_TYPE_EDGE_RISING -+ 0 247 IRQ_TYPE_EDGE_RISING -+ 0 248 IRQ_TYPE_EDGE_RISING -+ 0 249 IRQ_TYPE_EDGE_RISING -+ 0 250 IRQ_TYPE_EDGE_RISING -+ 0 251 IRQ_TYPE_EDGE_RISING -+ 0 252 IRQ_TYPE_EDGE_RISING -+ 0 253 IRQ_TYPE_EDGE_RISING -+ 0 254 IRQ_TYPE_EDGE_RISING -+ 0 255 IRQ_TYPE_EDGE_RISING>; -+ -+ status = "disabled"; -+ -+ gmac0: gmac0 { -+ local-mac-address = [00 00 00 00 00 00]; -+ vlan_tag = <1 0x1f>; -+ }; -+ -+ gmac1: gmac1 { -+ local-mac-address = [00 00 00 00 00 00]; -+ qcom,phy_mdio_addr = <4>; -+ qcom,poll_required = <1>; -+ qcom,forced_speed = <1000>; -+ qcom,forced_duplex = <1>; -+ vlan_tag = <2 0x20>; -+ }; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - compatible = "qca,uni-ssphy"; - reg = <0x9a000 0x800>; diff --git a/target/linux/ipq806x/patches-4.9/820-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch b/target/linux/ipq806x/patches-4.9/820-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch deleted file mode 100644 index 6f5b6616d146..000000000000 --- a/target/linux/ipq806x/patches-4.9/820-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch +++ /dev/null @@ -1,429 +0,0 @@ -From e73682ec4455c34f3f3edc7f40d90ed297521012 Mon Sep 17 00:00:00 2001 -From: Senthilkumar N L -Date: Tue, 6 Jan 2015 12:52:23 +0530 -Subject: [PATCH] qcom: ipq4019: Add IPQ4019 USB HS/SS PHY drivers - -These drivers handles control and configuration of the HS -and SS USB PHY transceivers. - -Signed-off-by: Senthilkumar N L -Signed-off-by: Christian Lamparter - ---- -Changed: - - replaced spaces with tabs - - remove emulation and host variables ---- - drivers/usb/phy/Kconfig | 11 ++ - drivers/usb/phy/Makefile | 2 + - drivers/usb/phy/phy-qca-baldur.c | 233 +++++++++++++++++++++++++++++++++++++++ - drivers/usb/phy/phy-qca-uniphy.c | 141 +++++++++++++++++++++++ - 4 files changed, 387 insertions(+) - create mode 100644 drivers/usb/phy/phy-qca-baldur.c - create mode 100644 drivers/usb/phy/phy-qca-uniphy.c - ---- a/drivers/usb/phy/Kconfig -+++ b/drivers/usb/phy/Kconfig -@@ -195,6 +195,17 @@ config USB_MXS_PHY - - MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x. - -+config USB_IPQ4019_PHY -+ tristate "IPQ4019 PHY wrappers support" -+ depends on (USB || USB_GADGET) && ARCH_QCOM -+ select USB_PHY -+ help -+ Enable this to support the USB PHY transceivers on QCA961x chips. -+ It handles PHY initialization, clock management required after -+ resetting the hardware and power management. -+ This driver is required even for peripheral only or host only -+ mode configurations. -+ - config USB_ULPI - bool "Generic ULPI Transceiver Driver" - depends on ARM || ARM64 ---- a/drivers/usb/phy/Makefile -+++ b/drivers/usb/phy/Makefile -@@ -21,6 +21,8 @@ obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio - obj-$(CONFIG_USB_ISP1301) += phy-isp1301.o - obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o - obj-$(CONFIG_USB_QCOM_8X16_PHY) += phy-qcom-8x16-usb.o -+obj-$(CONFIG_USB_IPQ4019_PHY) += phy-qca-baldur.o -+obj-$(CONFIG_USB_IPQ4019_PHY) += phy-qca-uniphy.o - obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o - obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o - obj-$(CONFIG_USB_ULPI) += phy-ulpi.o ---- /dev/null -+++ b/drivers/usb/phy/phy-qca-baldur.c -@@ -0,0 +1,233 @@ -+/* Copyright (c) 2015, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/** -+ * USB Hardware registers -+ */ -+#define PHY_CTRL0_ADDR 0x000 -+#define PHY_CTRL1_ADDR 0x004 -+#define PHY_CTRL2_ADDR 0x008 -+#define PHY_CTRL3_ADDR 0x00C -+#define PHY_CTRL4_ADDR 0x010 -+#define PHY_MISC_ADDR 0x024 -+#define PHY_IPG_ADDR 0x030 -+ -+#define PHY_CTRL0_VAL 0xA4600015 -+#define PHY_CTRL1_VAL 0x09500000 -+#define PHY_CTRL2_VAL 0x00058180 -+#define PHY_CTRL3_VAL 0x6DB6DCD6 -+#define PHY_CTRL4_VAL 0x836DB6DB -+#define PHY_MISC_VAL 0x3803FB0C -+#define PHY_IPG_VAL 0x47323232 -+ -+#define USB30_HS_PHY_HOST_MODE (0x01 << 21) -+#define USB20_HS_PHY_HOST_MODE (0x01 << 5) -+ -+/* used to differentiate between USB3 HS and USB2 HS PHY */ -+struct qca_baldur_hs_data { -+ unsigned int usb3_hs_phy; -+ unsigned int phy_config_offset; -+}; -+ -+struct qca_baldur_hs_phy { -+ struct device *dev; -+ struct usb_phy phy; -+ -+ void __iomem *base; -+ void __iomem *qscratch_base; -+ -+ struct reset_control *por_rst; -+ struct reset_control *srif_rst; -+ -+ const struct qca_baldur_hs_data *data; -+}; -+ -+#define phy_to_dw_phy(x) container_of((x), struct qca_baldur_hs_phy, phy) -+ -+static int qca_baldur_phy_read(struct usb_phy *x, u32 reg) -+{ -+ struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x); -+ -+ return readl(phy->base + reg); -+} -+ -+static int qca_baldur_phy_write(struct usb_phy *x, u32 val, u32 reg) -+{ -+ struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x); -+ -+ writel(val, phy->base + reg); -+ return 0; -+} -+ -+static int qca_baldur_hs_phy_init(struct usb_phy *x) -+{ -+ struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x); -+ -+ /* assert HS PHY POR reset */ -+ reset_control_assert(phy->por_rst); -+ msleep(10); -+ -+ /* assert HS PHY SRIF reset */ -+ reset_control_assert(phy->srif_rst); -+ msleep(10); -+ -+ /* deassert HS PHY SRIF reset and program HS PHY registers */ -+ reset_control_deassert(phy->srif_rst); -+ msleep(10); -+ -+ /* perform PHY register writes */ -+ writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR); -+ writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR); -+ writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR); -+ writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR); -+ writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR); -+ writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR); -+ writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR); -+ -+ msleep(10); -+ -+ /* de-assert USB3 HS PHY POR reset */ -+ reset_control_deassert(phy->por_rst); -+ -+ return 0; -+} -+ -+static int qca_baldur_hs_get_resources(struct qca_baldur_hs_phy *phy) -+{ -+ struct platform_device *pdev = to_platform_device(phy->dev); -+ struct resource *res; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ phy->base = devm_ioremap_resource(phy->dev, res); -+ if (IS_ERR(phy->base)) -+ return PTR_ERR(phy->base); -+ -+ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst"); -+ if (IS_ERR(phy->por_rst)) -+ return PTR_ERR(phy->por_rst); -+ -+ phy->srif_rst = devm_reset_control_get(phy->dev, "srif_rst"); -+ if (IS_ERR(phy->srif_rst)) -+ return PTR_ERR(phy->srif_rst); -+ -+ return 0; -+} -+ -+static void qca_baldur_hs_put_resources(struct qca_baldur_hs_phy *phy) -+{ -+ reset_control_assert(phy->srif_rst); -+ reset_control_assert(phy->por_rst); -+} -+ -+static int qca_baldur_hs_remove(struct platform_device *pdev) -+{ -+ struct qca_baldur_hs_phy *phy = platform_get_drvdata(pdev); -+ -+ usb_remove_phy(&phy->phy); -+ return 0; -+} -+ -+static void qca_baldur_hs_phy_shutdown(struct usb_phy *x) -+{ -+ struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x); -+ -+ qca_baldur_hs_put_resources(phy); -+} -+ -+static struct usb_phy_io_ops qca_baldur_io_ops = { -+ .read = qca_baldur_phy_read, -+ .write = qca_baldur_phy_write, -+}; -+ -+static const struct qca_baldur_hs_data usb3_hs_data = { -+ .usb3_hs_phy = 1, -+ .phy_config_offset = USB30_HS_PHY_HOST_MODE, -+}; -+ -+static const struct qca_baldur_hs_data usb2_hs_data = { -+ .usb3_hs_phy = 0, -+ .phy_config_offset = USB20_HS_PHY_HOST_MODE, -+}; -+ -+static const struct of_device_id qca_baldur_hs_id_table[] = { -+ { .compatible = "qca,baldur-usb3-hsphy", .data = &usb3_hs_data }, -+ { .compatible = "qca,baldur-usb2-hsphy", .data = &usb2_hs_data }, -+ { /* Sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, qca_baldur_hs_id_table); -+ -+static int qca_baldur_hs_probe(struct platform_device *pdev) -+{ -+ const struct of_device_id *match; -+ struct qca_baldur_hs_phy *phy; -+ int err; -+ -+ match = of_match_device(qca_baldur_hs_id_table, &pdev->dev); -+ if (!match) -+ return -ENODEV; -+ -+ phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); -+ if (!phy) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, phy); -+ phy->dev = &pdev->dev; -+ -+ phy->data = match->data; -+ -+ err = qca_baldur_hs_get_resources(phy); -+ if (err < 0) { -+ dev_err(&pdev->dev, "failed to request resources: %d\n", err); -+ return err; -+ } -+ -+ phy->phy.dev = phy->dev; -+ phy->phy.label = "qca-baldur-hsphy"; -+ phy->phy.init = qca_baldur_hs_phy_init; -+ phy->phy.shutdown = qca_baldur_hs_phy_shutdown; -+ phy->phy.type = USB_PHY_TYPE_USB2; -+ phy->phy.io_ops = &qca_baldur_io_ops; -+ -+ err = usb_add_phy_dev(&phy->phy); -+ return err; -+} -+ -+static struct platform_driver qca_baldur_hs_driver = { -+ .probe = qca_baldur_hs_probe, -+ .remove = qca_baldur_hs_remove, -+ .driver = { -+ .name = "qca-baldur-hsphy", -+ .owner = THIS_MODULE, -+ .of_match_table = qca_baldur_hs_id_table, -+ }, -+}; -+ -+module_platform_driver(qca_baldur_hs_driver); -+ -+MODULE_ALIAS("platform:qca-baldur-hsphy"); -+MODULE_LICENSE("Dual BSD/GPL"); -+MODULE_DESCRIPTION("USB3 QCA BALDUR HSPHY driver"); ---- /dev/null -+++ b/drivers/usb/phy/phy-qca-uniphy.c -@@ -0,0 +1,135 @@ -+/* Copyright (c) 2015, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+struct qca_uni_ss_phy { -+ struct usb_phy phy; -+ struct device *dev; -+ -+ void __iomem *base; -+ -+ struct reset_control *por_rst; -+}; -+ -+#define phy_to_dw_phy(x) container_of((x), struct qca_uni_ss_phy, phy) -+ -+static void qca_uni_ss_phy_shutdown(struct usb_phy *x) -+{ -+ struct qca_uni_ss_phy *phy = phy_to_dw_phy(x); -+ -+ /* assert SS PHY POR reset */ -+ reset_control_assert(phy->por_rst); -+} -+ -+static int qca_uni_ss_phy_init(struct usb_phy *x) -+{ -+ struct qca_uni_ss_phy *phy = phy_to_dw_phy(x); -+ -+ /* assert SS PHY POR reset */ -+ reset_control_assert(phy->por_rst); -+ -+ msleep(20); -+ -+ /* deassert SS PHY POR reset */ -+ reset_control_deassert(phy->por_rst); -+ -+ return 0; -+} -+ -+static int qca_uni_ss_get_resources(struct platform_device *pdev, -+ struct qca_uni_ss_phy *phy) -+{ -+ struct resource *res; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ phy->base = devm_ioremap_resource(phy->dev, res); -+ if (IS_ERR(phy->base)) -+ return PTR_ERR(phy->base); -+ -+ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst"); -+ if (IS_ERR(phy->por_rst)) -+ return PTR_ERR(phy->por_rst); -+ -+ return 0; -+} -+ -+static int qca_uni_ss_remove(struct platform_device *pdev) -+{ -+ struct qca_uni_ss_phy *phy = platform_get_drvdata(pdev); -+ -+ usb_remove_phy(&phy->phy); -+ return 0; -+} -+ -+static const struct of_device_id qca_uni_ss_id_table[] = { -+ { .compatible = "qca,uni-ssphy" }, -+ { /* Sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, qca_uni_ss_id_table); -+ -+static int qca_uni_ss_probe(struct platform_device *pdev) -+{ -+ struct qca_uni_ss_phy *phy; -+ int ret; -+ -+ phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); -+ if (!phy) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, phy); -+ phy->dev = &pdev->dev; -+ -+ ret = qca_uni_ss_get_resources(pdev, phy); -+ if (ret < 0) { -+ dev_err(&pdev->dev, "failed to request resources: %d\n", ret); -+ return ret; -+ } -+ -+ phy->phy.dev = phy->dev; -+ phy->phy.label = "qca-uni-ssphy"; -+ phy->phy.init = qca_uni_ss_phy_init; -+ phy->phy.shutdown = qca_uni_ss_phy_shutdown; -+ phy->phy.type = USB_PHY_TYPE_USB3; -+ -+ ret = usb_add_phy_dev(&phy->phy); -+ return ret; -+} -+ -+static struct platform_driver qca_uni_ss_driver = { -+ .probe = qca_uni_ss_probe, -+ .remove = qca_uni_ss_remove, -+ .driver = { -+ .name = "qca-uni-ssphy", -+ .owner = THIS_MODULE, -+ .of_match_table = qca_uni_ss_id_table, -+ }, -+}; -+ -+module_platform_driver(qca_uni_ss_driver); -+ -+MODULE_ALIAS("platform:qca-uni-ssphy"); -+MODULE_LICENSE("Dual BSD/GPL"); -+MODULE_DESCRIPTION("USB3 QCA UNI SSPHY driver"); diff --git a/target/linux/ipq806x/patches-4.9/830-usb-dwc3-register-qca-ipq4019-dwc3-in-dwc3-of-simple.patch b/target/linux/ipq806x/patches-4.9/830-usb-dwc3-register-qca-ipq4019-dwc3-in-dwc3-of-simple.patch deleted file mode 100644 index 5e183dbad789..000000000000 --- a/target/linux/ipq806x/patches-4.9/830-usb-dwc3-register-qca-ipq4019-dwc3-in-dwc3-of-simple.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 08c18ab774368feb610d1eb952957bb1bb35129f Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sat, 19 Nov 2016 00:52:35 +0100 -Subject: [PATCH 37/38] usb: dwc3: register qca,ipq4019-dwc3 in dwc3-of-simple - -For host mode, the dwc3 found in the IPQ4019 can be driven -by the dwc3-of-simple module. It will get more tricky for -OTG since they'll need to enable VBUS and reconfigure the -registers. - -Signed-off-by: Christian Lamparter ---- - drivers/usb/dwc3/dwc3-of-simple.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/usb/dwc3/dwc3-of-simple.c -+++ b/drivers/usb/dwc3/dwc3-of-simple.c -@@ -199,6 +199,7 @@ static const struct dev_pm_ops dwc3_of_s - - static const struct of_device_id of_dwc3_simple_match[] = { - { .compatible = "qcom,dwc3" }, -+ { .compatible = "qca,ipq4019-dwc3" }, - { .compatible = "rockchip,rk3399-dwc3" }, - { .compatible = "xlnx,zynqmp-dwc3" }, - { .compatible = "cavium,octeon-7130-usb-uctl" }, diff --git a/target/linux/ipq806x/patches-4.9/852-ipq4019-pinctrl-Updated-various-Pin-definitions.patch b/target/linux/ipq806x/patches-4.9/852-ipq4019-pinctrl-Updated-various-Pin-definitions.patch deleted file mode 100644 index d0a6a26a561a..000000000000 --- a/target/linux/ipq806x/patches-4.9/852-ipq4019-pinctrl-Updated-various-Pin-definitions.patch +++ /dev/null @@ -1,1328 +0,0 @@ -From fc6cf61517b8b4ab4678659936fc7572f699d6e7 Mon Sep 17 00:00:00 2001 -From: Ram Chandra Jangir -Date: Tue, 28 Mar 2017 14:00:00 +0530 -Subject: [PATCH] ipq4019: pinctrl: Updated various Pin definitions - -Populate default values for various GPIO functions - -Signed-off-by: Ram Chandra Jangir ---- - drivers/pinctrl/qcom/pinctrl-ipq4019.c | 1189 +++++++++++++++++++++++++++++--- - 1 file changed, 1111 insertions(+), 78 deletions(-) - ---- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c -+++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c -@@ -276,16 +276,531 @@ DECLARE_QCA_GPIO_PINS(99); - - - enum ipq4019_functions { -+ qca_mux_rmii0_refclk, -+ qca_mux_wifi0_rfsilient0, -+ qca_mux_wifi1_rfsilient0, -+ qca_mux_smart2, -+ qca_mux_led4, -+ qca_mux_wifi0_cal, -+ qca_mux_wifi1_cal, -+ qca_mux_wifi_wci0, -+ qca_mux_rmii0_dv, -+ qca_mux_wifi_wci1, -+ qca_mux_rmii1_refclk, -+ qca_mux_blsp_spi1, -+ qca_mux_led5, -+ qca_mux_rmii10, -+ qca_mux_led6, -+ qca_mux_rmii11, -+ qca_mux_led7, -+ qca_mux_rmii1_dv, -+ qca_mux_led8, -+ qca_mux_rmii1_tx, -+ qca_mux_aud_pin, -+ qca_mux_led9, -+ qca_mux_rmii1_rx, -+ qca_mux_led10, -+ qca_mux_wifi0_rfsilient1, -+ qca_mux_wifi1_rfsilient1, -+ qca_mux_led11, -+ qca_mux_boot7, -+ qca_mux_qpic_pad, -+ qca_mux_pcie_clk, -+ qca_mux_tm_clk0, -+ qca_mux_wifi00, -+ qca_mux_wifi10, -+ qca_mux_mdio1, -+ qca_mux_prng_rosc, -+ qca_mux_dbg_out, -+ qca_mux_tm0, -+ qca_mux_wifi01, -+ qca_mux_wifi11, -+ qca_mux_atest_char3, -+ qca_mux_pmu0, -+ qca_mux_boot8, -+ qca_mux_tm1, -+ qca_mux_atest_char2, -+ qca_mux_pmu1, -+ qca_mux_boot9, -+ qca_mux_tm2, -+ qca_mux_atest_char1, -+ qca_mux_tm_ack, -+ qca_mux_wifi03, -+ qca_mux_wifi13, -+ qca_mux_qpic_pad4, -+ qca_mux_atest_char0, -+ qca_mux_tm3, -+ qca_mux_wifi02, -+ qca_mux_wifi12, -+ qca_mux_qpic_pad5, -+ qca_mux_smart3, -+ qca_mux_wcss0_dbg14, -+ qca_mux_tm4, -+ qca_mux_wifi04, -+ qca_mux_wifi14, -+ qca_mux_qpic_pad6, -+ qca_mux_wcss0_dbg15, -+ qca_mux_qdss_tracectl_a, -+ qca_mux_boot18, -+ qca_mux_tm5, -+ qca_mux_qpic_pad7, -+ qca_mux_atest_char, -+ qca_mux_wcss0_dbg4, -+ qca_mux_qdss_traceclk_a, -+ qca_mux_boot19, -+ qca_mux_tm6, -+ qca_mux_wcss0_dbg5, -+ qca_mux_qdss_cti_trig_out_a0, -+ qca_mux_boot14, -+ qca_mux_tm7, -+ qca_mux_chip_rst, -+ qca_mux_wcss0_dbg6, -+ qca_mux_qdss_cti_trig_out_b0, -+ qca_mux_boot11, -+ qca_mux_tm8, -+ qca_mux_wcss0_dbg7, -+ qca_mux_wcss1_dbg7, -+ qca_mux_boot20, -+ qca_mux_tm9, -+ qca_mux_qpic_pad1, -+ qca_mux_wcss0_dbg8, -+ qca_mux_wcss1_dbg8, -+ qca_mux_qpic_pad2, -+ qca_mux_wcss0_dbg9, -+ qca_mux_wcss1_dbg9, -+ qca_mux_qpic_pad3, -+ qca_mux_wcss0_dbg10, -+ qca_mux_wcss1_dbg10, -+ qca_mux_qpic_pad0, -+ qca_mux_wcss0_dbg11, -+ qca_mux_wcss1_dbg11, -+ qca_mux_qpic_pad8, -+ qca_mux_wcss0_dbg12, -+ qca_mux_wcss1_dbg12, -+ qca_mux_wifi034, -+ qca_mux_wifi134, -+ qca_mux_jtag_tdi, - qca_mux_gpio, -+ qca_mux_i2s_rx_bclk, -+ qca_mux_jtag_tck, -+ qca_mux_i2s_rx_fsync, -+ qca_mux_jtag_tms, -+ qca_mux_i2s_rxd, -+ qca_mux_smart0, -+ qca_mux_jtag_tdo, -+ qca_mux_jtag_rst, -+ qca_mux_jtag_trst, -+ qca_mux_mdio0, -+ qca_mux_wcss0_dbg18, -+ qca_mux_wcss1_dbg18, -+ qca_mux_qdss_tracedata_a, -+ qca_mux_mdc, -+ qca_mux_wcss0_dbg19, -+ qca_mux_wcss1_dbg19, - qca_mux_blsp_uart1, -+ qca_mux_wifi0_uart, -+ qca_mux_wifi1_uart, -+ qca_mux_smart1, -+ qca_mux_wcss0_dbg20, -+ qca_mux_wcss1_dbg20, -+ qca_mux_wifi0_uart0, -+ qca_mux_wifi1_uart0, -+ qca_mux_wcss0_dbg21, -+ qca_mux_wcss1_dbg21, - qca_mux_blsp_i2c0, -+ qca_mux_wcss0_dbg22, -+ qca_mux_wcss1_dbg22, -+ qca_mux_wcss0_dbg23, -+ qca_mux_wcss1_dbg23, -+ qca_mux_blsp_spi0, - qca_mux_blsp_i2c1, -+ qca_mux_wcss0_dbg24, -+ qca_mux_wcss1_dbg24, -+ qca_mux_wcss0_dbg25, -+ qca_mux_wcss1_dbg25, -+ qca_mux_wcss0_dbg26, -+ qca_mux_wcss1_dbg26, -+ qca_mux_wcss0_dbg, -+ qca_mux_wcss1_dbg, - qca_mux_blsp_uart0, -- qca_mux_blsp_spi1, -- qca_mux_blsp_spi0, -+ qca_mux_led0, -+ qca_mux_wcss0_dbg28, -+ qca_mux_wcss1_dbg28, -+ qca_mux_led1, -+ qca_mux_wcss0_dbg29, -+ qca_mux_wcss1_dbg29, -+ qca_mux_wifi0_uart1, -+ qca_mux_wifi1_uart1, -+ qca_mux_wcss0_dbg30, -+ qca_mux_wcss1_dbg30, -+ qca_mux_wcss0_dbg31, -+ qca_mux_wcss1_dbg31, -+ qca_mux_i2s_rx_mclk, -+ qca_mux_wcss0_dbg16, -+ qca_mux_wcss1_dbg16, -+ qca_mux_wcss0_dbg17, -+ qca_mux_wcss1_dbg17, -+ qca_mux_rgmii0, -+ qca_mux_sdio0, -+ qca_mux_rgmii1, -+ qca_mux_sdio1, -+ qca_mux_rgmii2, -+ qca_mux_i2s_tx_mclk, -+ qca_mux_sdio2, -+ qca_mux_rgmii3, -+ qca_mux_i2s_tx_bclk, -+ qca_mux_sdio3, -+ qca_mux_rgmii_rx, -+ qca_mux_i2s_tx_fsync, -+ qca_mux_sdio_clk, -+ qca_mux_rgmii_txc, -+ qca_mux_i2s_td1, -+ qca_mux_sdio_cmd, -+ qca_mux_i2s_td2, -+ qca_mux_sdio4, -+ qca_mux_i2s_td3, -+ qca_mux_sdio5, -+ qca_mux_audio_pwm0, -+ qca_mux_sdio6, -+ qca_mux_audio_pwm1, -+ qca_mux_wcss0_dbg27, -+ qca_mux_wcss1_dbg27, -+ qca_mux_sdio7, -+ qca_mux_rgmii_rxc, -+ qca_mux_audio_pwm2, -+ qca_mux_rgmii_tx, -+ qca_mux_audio_pwm3, -+ qca_mux_boot2, -+ qca_mux_i2s_spdif_in, -+ qca_mux_i2s_spdif_out, -+ qca_mux_rmii00, -+ qca_mux_led2, -+ qca_mux_rmii01, -+ qca_mux_wifi0_wci, -+ qca_mux_wifi1_wci, -+ qca_mux_boot4, -+ qca_mux_rmii0_tx, -+ qca_mux_boot5, -+ qca_mux_rmii0_rx, -+ qca_mux_pcie_clk1, -+ qca_mux_led3, -+ qca_mux_sdio_cd, - qca_mux_NA, - }; - -+static const char * const rmii0_refclk_groups[] = { -+ "gpio40", -+}; -+static const char * const wifi0_rfsilient0_groups[] = { -+ "gpio40", -+}; -+static const char * const wifi1_rfsilient0_groups[] = { -+ "gpio40", -+}; -+static const char * const smart2_groups[] = { -+ "gpio40", "gpio41", "gpio48", "gpio49", -+}; -+static const char * const led4_groups[] = { -+ "gpio40", -+}; -+static const char * const wifi0_cal_groups[] = { -+ "gpio41", "gpio51", -+}; -+static const char * const wifi1_cal_groups[] = { -+ "gpio41", "gpio51", -+}; -+static const char * const wifi_wci0_groups[] = { -+ "gpio42", -+}; -+static const char * const rmii0_dv_groups[] = { -+ "gpio43", -+}; -+static const char * const wifi_wci1_groups[] = { -+ "gpio43", -+}; -+static const char * const rmii1_refclk_groups[] = { -+ "gpio44", -+}; -+static const char * const blsp_spi1_groups[] = { -+ "gpio44", "gpio45", "gpio46", "gpio47", -+}; -+static const char * const led5_groups[] = { -+ "gpio44", -+}; -+static const char * const rmii10_groups[] = { -+ "gpio45", "gpio50", -+}; -+static const char * const led6_groups[] = { -+ "gpio45", -+}; -+static const char * const rmii11_groups[] = { -+ "gpio46", "gpio51", -+}; -+static const char * const led7_groups[] = { -+ "gpio46", -+}; -+static const char * const rmii1_dv_groups[] = { -+ "gpio47", -+}; -+static const char * const led8_groups[] = { -+ "gpio47", -+}; -+static const char * const rmii1_tx_groups[] = { -+ "gpio48", -+}; -+static const char * const aud_pin_groups[] = { -+ "gpio48", "gpio49", "gpio50", "gpio51", -+}; -+static const char * const led9_groups[] = { -+ "gpio48", -+}; -+static const char * const rmii1_rx_groups[] = { -+ "gpio49", -+}; -+static const char * const led10_groups[] = { -+ "gpio49", -+}; -+static const char * const wifi0_rfsilient1_groups[] = { -+ "gpio50", -+}; -+static const char * const wifi1_rfsilient1_groups[] = { -+ "gpio50", -+}; -+static const char * const led11_groups[] = { -+ "gpio50", -+}; -+static const char * const boot7_groups[] = { -+ "gpio51", -+}; -+static const char * const qpic_pad_groups[] = { -+ "gpio52", "gpio53", "gpio54", "gpio55", "gpio56", "gpio61", "gpio62", -+ "gpio63", "gpio69", -+}; -+static const char * const pcie_clk_groups[] = { -+ "gpio52", -+}; -+static const char * const tm_clk0_groups[] = { -+ "gpio52", -+}; -+static const char * const wifi00_groups[] = { -+ "gpio52", -+}; -+static const char * const wifi10_groups[] = { -+ "gpio52", -+}; -+static const char * const mdio1_groups[] = { -+ "gpio53", -+}; -+static const char * const prng_rosc_groups[] = { -+ "gpio53", -+}; -+static const char * const dbg_out_groups[] = { -+ "gpio53", -+}; -+static const char * const tm0_groups[] = { -+ "gpio53", -+}; -+static const char * const wifi01_groups[] = { -+ "gpio53", -+}; -+static const char * const wifi11_groups[] = { -+ "gpio53", -+}; -+static const char * const atest_char3_groups[] = { -+ "gpio54", -+}; -+static const char * const pmu0_groups[] = { -+ "gpio54", -+}; -+static const char * const boot8_groups[] = { -+ "gpio54", -+}; -+static const char * const tm1_groups[] = { -+ "gpio54", -+}; -+static const char * const atest_char2_groups[] = { -+ "gpio55", -+}; -+static const char * const pmu1_groups[] = { -+ "gpio55", -+}; -+static const char * const boot9_groups[] = { -+ "gpio55", -+}; -+static const char * const tm2_groups[] = { -+ "gpio55", -+}; -+static const char * const atest_char1_groups[] = { -+ "gpio56", -+}; -+static const char * const tm_ack_groups[] = { -+ "gpio56", -+}; -+static const char * const wifi03_groups[] = { -+ "gpio56", -+}; -+static const char * const wifi13_groups[] = { -+ "gpio56", -+}; -+static const char * const qpic_pad4_groups[] = { -+ "gpio57", -+}; -+static const char * const atest_char0_groups[] = { -+ "gpio57", -+}; -+static const char * const tm3_groups[] = { -+ "gpio57", -+}; -+static const char * const wifi02_groups[] = { -+ "gpio57", -+}; -+static const char * const wifi12_groups[] = { -+ "gpio57", -+}; -+static const char * const qpic_pad5_groups[] = { -+ "gpio58", -+}; -+static const char * const smart3_groups[] = { -+ "gpio58", "gpio59", "gpio60", "gpio61", -+}; -+static const char * const wcss0_dbg14_groups[] = { -+ "gpio58", -+}; -+static const char * const tm4_groups[] = { -+ "gpio58", -+}; -+static const char * const wifi04_groups[] = { -+ "gpio58", -+}; -+static const char * const wifi14_groups[] = { -+ "gpio58", -+}; -+static const char * const qpic_pad6_groups[] = { -+ "gpio59", -+}; -+static const char * const wcss0_dbg15_groups[] = { -+ "gpio59", -+}; -+static const char * const qdss_tracectl_a_groups[] = { -+ "gpio59", -+}; -+static const char * const boot18_groups[] = { -+ "gpio59", -+}; -+static const char * const tm5_groups[] = { -+ "gpio59", -+}; -+static const char * const qpic_pad7_groups[] = { -+ "gpio60", -+}; -+static const char * const atest_char_groups[] = { -+ "gpio60", -+}; -+static const char * const wcss0_dbg4_groups[] = { -+ "gpio60", -+}; -+static const char * const qdss_traceclk_a_groups[] = { -+ "gpio60", -+}; -+static const char * const boot19_groups[] = { -+ "gpio60", -+}; -+static const char * const tm6_groups[] = { -+ "gpio60", -+}; -+static const char * const wcss0_dbg5_groups[] = { -+ "gpio61", -+}; -+static const char * const qdss_cti_trig_out_a0_groups[] = { -+ "gpio61", -+}; -+static const char * const boot14_groups[] = { -+ "gpio61", -+}; -+static const char * const tm7_groups[] = { -+ "gpio61", -+}; -+static const char * const chip_rst_groups[] = { -+ "gpio62", -+}; -+static const char * const wcss0_dbg6_groups[] = { -+ "gpio62", -+}; -+static const char * const qdss_cti_trig_out_b0_groups[] = { -+ "gpio62", -+}; -+static const char * const boot11_groups[] = { -+ "gpio62", -+}; -+static const char * const tm8_groups[] = { -+ "gpio62", -+}; -+static const char * const wcss0_dbg7_groups[] = { -+ "gpio63", -+}; -+static const char * const wcss1_dbg7_groups[] = { -+ "gpio63", -+}; -+static const char * const boot20_groups[] = { -+ "gpio63", -+}; -+static const char * const tm9_groups[] = { -+ "gpio63", -+}; -+static const char * const qpic_pad1_groups[] = { -+ "gpio64", -+}; -+static const char * const wcss0_dbg8_groups[] = { -+ "gpio64", -+}; -+static const char * const wcss1_dbg8_groups[] = { -+ "gpio64", -+}; -+static const char * const qpic_pad2_groups[] = { -+ "gpio65", -+}; -+static const char * const wcss0_dbg9_groups[] = { -+ "gpio65", -+}; -+static const char * const wcss1_dbg9_groups[] = { -+ "gpio65", -+}; -+static const char * const qpic_pad3_groups[] = { -+ "gpio66", -+}; -+static const char * const wcss0_dbg10_groups[] = { -+ "gpio66", -+}; -+static const char * const wcss1_dbg10_groups[] = { -+ "gpio66", -+}; -+static const char * const qpic_pad0_groups[] = { -+ "gpio67", -+}; -+static const char * const wcss0_dbg11_groups[] = { -+ "gpio67", -+}; -+static const char * const wcss1_dbg11_groups[] = { -+ "gpio67", -+}; -+static const char * const qpic_pad8_groups[] = { -+ "gpio68", -+}; -+static const char * const wcss0_dbg12_groups[] = { -+ "gpio68", -+}; -+static const char * const wcss1_dbg12_groups[] = { -+ "gpio68", -+}; -+static const char * const wifi034_groups[] = { -+ "gpio98", -+}; -+static const char * const wifi134_groups[] = { -+ "gpio98", -+}; -+static const char * const jtag_tdi_groups[] = { -+ "gpio0", -+}; - static const char * const gpio_groups[] = { - "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", - "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", -@@ -303,13 +818,103 @@ static const char * const gpio_groups[] - "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98", - "gpio99", - }; -- -+static const char * const i2s_rx_bclk_groups[] = { -+ "gpio0", "gpio21", "gpio60", -+}; -+static const char * const jtag_tck_groups[] = { -+ "gpio1", -+}; -+static const char * const i2s_rx_fsync_groups[] = { -+ "gpio1", "gpio22", "gpio61", -+}; -+static const char * const jtag_tms_groups[] = { -+ "gpio2", -+}; -+static const char * const i2s_rxd_groups[] = { -+ "gpio2", "gpio23", "gpio63", -+}; -+static const char * const smart0_groups[] = { -+ "gpio0", "gpio1", "gpio2", "gpio5", "gpio44", "gpio45", "gpio46", -+ "gpio47", -+}; -+static const char * const jtag_tdo_groups[] = { -+ "gpio3", -+}; -+static const char * const jtag_rst_groups[] = { -+ "gpio4", -+}; -+static const char * const jtag_trst_groups[] = { -+ "gpio5", -+}; -+static const char * const mdio0_groups[] = { -+ "gpio6", -+}; -+static const char * const wcss0_dbg18_groups[] = { -+ "gpio6", "gpio22", "gpio39", -+}; -+static const char * const wcss1_dbg18_groups[] = { -+ "gpio6", "gpio22", "gpio39", -+}; -+static const char * const qdss_tracedata_a_groups[] = { -+ "gpio6", "gpio7", "gpio8", "gpio9", "gpio10", "gpio11", "gpio16", -+ "gpio17", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", -+ "gpio43", -+}; -+static const char * const mdc_groups[] = { -+ "gpio7", "gpio52", -+}; -+static const char * const wcss0_dbg19_groups[] = { -+ "gpio7", "gpio23", "gpio40", -+}; -+static const char * const wcss1_dbg19_groups[] = { -+ "gpio7", "gpio23", "gpio40", -+}; - static const char * const blsp_uart1_groups[] = { - "gpio8", "gpio9", "gpio10", "gpio11", - }; -+static const char * const wifi0_uart_groups[] = { -+ "gpio8", "gpio9", "gpio11", "gpio19", "gpio62", -+}; -+static const char * const wifi1_uart_groups[] = { -+ "gpio8", "gpio11", "gpio19", "gpio62", "gpio63", -+}; -+static const char * const smart1_groups[] = { -+ "gpio8", "gpio9", "gpio16", "gpio17", "gpio58", "gpio59", "gpio60", -+ "gpio61", -+}; -+static const char * const wcss0_dbg20_groups[] = { -+ "gpio8", "gpio24", "gpio41", -+}; -+static const char * const wcss1_dbg20_groups[] = { -+ "gpio8", "gpio24", "gpio41", -+}; -+static const char * const wifi0_uart0_groups[] = { -+ "gpio9", "gpio10", -+}; -+static const char * const wifi1_uart0_groups[] = { -+ "gpio9", "gpio10", -+}; -+static const char * const wcss0_dbg21_groups[] = { -+ "gpio9", "gpio25", "gpio42", -+}; -+static const char * const wcss1_dbg21_groups[] = { -+ "gpio9", "gpio25", "gpio42", -+}; - static const char * const blsp_i2c0_groups[] = { - "gpio10", "gpio11", "gpio20", "gpio21", "gpio58", "gpio59", - }; -+static const char * const wcss0_dbg22_groups[] = { -+ "gpio10", "gpio26", "gpio43", -+}; -+static const char * const wcss1_dbg22_groups[] = { -+ "gpio10", "gpio26", "gpio43", -+}; -+static const char * const wcss0_dbg23_groups[] = { -+ "gpio11", "gpio27", "gpio44", -+}; -+static const char * const wcss1_dbg23_groups[] = { -+ "gpio11", "gpio27", "gpio44", -+}; - static const char * const blsp_spi0_groups[] = { - "gpio12", "gpio13", "gpio14", "gpio15", "gpio45", - "gpio54", "gpio55", "gpio56", "gpio57", -@@ -317,94 +922,582 @@ static const char * const blsp_spi0_grou - static const char * const blsp_i2c1_groups[] = { - "gpio12", "gpio13", "gpio34", "gpio35", - }; -+static const char * const wcss0_dbg24_groups[] = { -+ "gpio12", "gpio28", "gpio45", -+}; -+static const char * const wcss1_dbg24_groups[] = { -+ "gpio12", "gpio28", "gpio45", -+}; -+static const char * const wcss0_dbg25_groups[] = { -+ "gpio13", "gpio29", "gpio46", -+}; -+static const char * const wcss1_dbg25_groups[] = { -+ "gpio13", "gpio29", "gpio46", -+}; -+static const char * const wcss0_dbg26_groups[] = { -+ "gpio14", "gpio30", "gpio47", -+}; -+static const char * const wcss1_dbg26_groups[] = { -+ "gpio14", "gpio30", "gpio47", -+}; -+static const char * const wcss0_dbg_groups[] = { -+ "gpio15", "gpio69", -+}; -+static const char * const wcss1_dbg_groups[] = { -+ "gpio15", -+}; - static const char * const blsp_uart0_groups[] = { - "gpio16", "gpio17", "gpio60", "gpio61", - }; --static const char * const blsp_spi1_groups[] = { -- "gpio44", "gpio45", "gpio46", "gpio47", -+static const char * const led0_groups[] = { -+ "gpio16", "gpio36", "gpio60", -+}; -+static const char * const wcss0_dbg28_groups[] = { -+ "gpio16", "gpio32", "gpio49", -+}; -+static const char * const wcss1_dbg28_groups[] = { -+ "gpio16", "gpio32", "gpio49", -+}; -+static const char * const led1_groups[] = { -+ "gpio17", "gpio37", "gpio61", -+}; -+static const char * const wcss0_dbg29_groups[] = { -+ "gpio17", "gpio33", "gpio50", -+}; -+static const char * const wcss1_dbg29_groups[] = { -+ "gpio17", "gpio33", "gpio50", -+}; -+static const char * const wifi0_uart1_groups[] = { -+ "gpio18", "gpio63", -+}; -+static const char * const wifi1_uart1_groups[] = { -+ "gpio18", "gpio63", -+}; -+static const char * const wcss0_dbg30_groups[] = { -+ "gpio18", "gpio34", "gpio51", -+}; -+static const char * const wcss1_dbg30_groups[] = { -+ "gpio18", "gpio34", "gpio51", -+}; -+static const char * const wcss0_dbg31_groups[] = { -+ "gpio19", "gpio35", "gpio52", -+}; -+static const char * const wcss1_dbg31_groups[] = { -+ "gpio19", "gpio35", -+}; -+static const char * const i2s_rx_mclk_groups[] = { -+ "gpio20", "gpio58", -+}; -+static const char * const wcss0_dbg16_groups[] = { -+ "gpio20", "gpio37", -+}; -+static const char * const wcss1_dbg16_groups[] = { -+ "gpio20", "gpio37", -+}; -+static const char * const wcss0_dbg17_groups[] = { -+ "gpio21", "gpio38", -+}; -+static const char * const wcss1_dbg17_groups[] = { -+ "gpio21", "gpio38", -+}; -+static const char * const rgmii0_groups[] = { -+ "gpio22", "gpio28", -+}; -+static const char * const sdio0_groups[] = { -+ "gpio23", -+}; -+static const char * const rgmii1_groups[] = { -+ "gpio23", "gpio29", -+}; -+static const char * const sdio1_groups[] = { -+ "gpio24", -+}; -+static const char * const rgmii2_groups[] = { -+ "gpio24", "gpio30", -+}; -+static const char * const i2s_tx_mclk_groups[] = { -+ "gpio24", "gpio52", -+}; -+static const char * const sdio2_groups[] = { -+ "gpio25", -+}; -+static const char * const rgmii3_groups[] = { -+ "gpio25", "gpio31", -+}; -+static const char * const i2s_tx_bclk_groups[] = { -+ "gpio25", "gpio53", "gpio60", -+}; -+static const char * const sdio3_groups[] = { -+ "gpio26", -+}; -+static const char * const rgmii_rx_groups[] = { -+ "gpio26", -+}; -+static const char * const i2s_tx_fsync_groups[] = { -+ "gpio26", "gpio57", "gpio61", -+}; -+static const char * const sdio_clk_groups[] = { -+ "gpio27", -+}; -+static const char * const rgmii_txc_groups[] = { -+ "gpio27", -+}; -+static const char * const i2s_td1_groups[] = { -+ "gpio27", "gpio54", "gpio63", -+}; -+static const char * const sdio_cmd_groups[] = { -+ "gpio28", -+}; -+static const char * const i2s_td2_groups[] = { -+ "gpio28", "gpio55", -+}; -+static const char * const sdio4_groups[] = { -+ "gpio29", -+}; -+static const char * const i2s_td3_groups[] = { -+ "gpio29", "gpio56", -+}; -+static const char * const sdio5_groups[] = { -+ "gpio30", -+}; -+static const char * const audio_pwm0_groups[] = { -+ "gpio30", "gpio64", -+}; -+static const char * const sdio6_groups[] = { -+ "gpio31", -+}; -+static const char * const audio_pwm1_groups[] = { -+ "gpio31", "gpio65", -+}; -+static const char * const wcss0_dbg27_groups[] = { -+ "gpio31", "gpio48", -+}; -+static const char * const wcss1_dbg27_groups[] = { -+ "gpio31", "gpio48", -+}; -+static const char * const sdio7_groups[] = { -+ "gpio32", -+}; -+static const char * const rgmii_rxc_groups[] = { -+ "gpio32", -+}; -+static const char * const audio_pwm2_groups[] = { -+ "gpio32", "gpio66", -+}; -+static const char * const rgmii_tx_groups[] = { -+ "gpio33", -+}; -+static const char * const audio_pwm3_groups[] = { -+ "gpio33", "gpio67", -+}; -+static const char * const boot2_groups[] = { -+ "gpio33", -+}; -+static const char * const i2s_spdif_in_groups[] = { -+ "gpio34", "gpio59", "gpio63", -+}; -+static const char * const i2s_spdif_out_groups[] = { -+ "gpio35", "gpio62", "gpio63", -+}; -+static const char * const rmii00_groups[] = { -+ "gpio36", "gpio41", -+}; -+static const char * const led2_groups[] = { -+ "gpio36", "gpio38", "gpio58", -+}; -+static const char * const rmii01_groups[] = { -+ "gpio37", "gpio42", -+}; -+static const char * const wifi0_wci_groups[] = { -+ "gpio37", -+}; -+static const char * const wifi1_wci_groups[] = { -+ "gpio37", -+}; -+static const char * const boot4_groups[] = { -+ "gpio37", -+}; -+static const char * const rmii0_tx_groups[] = { -+ "gpio38", -+}; -+static const char * const boot5_groups[] = { -+ "gpio38", -+}; -+static const char * const rmii0_rx_groups[] = { -+ "gpio39", -+}; -+static const char * const pcie_clk1_groups[] = { -+ "gpio39", -+}; -+static const char * const led3_groups[] = { -+ "gpio39", -+}; -+static const char * const sdio_cd_groups[] = { -+ "gpio22", - }; - - static const struct msm_function ipq4019_functions[] = { -+ FUNCTION(rmii0_refclk), -+ FUNCTION(wifi0_rfsilient0), -+ FUNCTION(wifi1_rfsilient0), -+ FUNCTION(smart2), -+ FUNCTION(led4), -+ FUNCTION(wifi0_cal), -+ FUNCTION(wifi1_cal), -+ FUNCTION(wifi_wci0), -+ FUNCTION(rmii0_dv), -+ FUNCTION(wifi_wci1), -+ FUNCTION(rmii1_refclk), -+ FUNCTION(blsp_spi1), -+ FUNCTION(led5), -+ FUNCTION(rmii10), -+ FUNCTION(led6), -+ FUNCTION(rmii11), -+ FUNCTION(led7), -+ FUNCTION(rmii1_dv), -+ FUNCTION(led8), -+ FUNCTION(rmii1_tx), -+ FUNCTION(aud_pin), -+ FUNCTION(led9), -+ FUNCTION(rmii1_rx), -+ FUNCTION(led10), -+ FUNCTION(wifi0_rfsilient1), -+ FUNCTION(wifi1_rfsilient1), -+ FUNCTION(led11), -+ FUNCTION(boot7), -+ FUNCTION(qpic_pad), -+ FUNCTION(pcie_clk), -+ FUNCTION(tm_clk0), -+ FUNCTION(wifi00), -+ FUNCTION(wifi10), -+ FUNCTION(mdio1), -+ FUNCTION(prng_rosc), -+ FUNCTION(dbg_out), -+ FUNCTION(tm0), -+ FUNCTION(wifi01), -+ FUNCTION(wifi11), -+ FUNCTION(atest_char3), -+ FUNCTION(pmu0), -+ FUNCTION(boot8), -+ FUNCTION(tm1), -+ FUNCTION(atest_char2), -+ FUNCTION(pmu1), -+ FUNCTION(boot9), -+ FUNCTION(tm2), -+ FUNCTION(atest_char1), -+ FUNCTION(tm_ack), -+ FUNCTION(wifi03), -+ FUNCTION(wifi13), -+ FUNCTION(qpic_pad4), -+ FUNCTION(atest_char0), -+ FUNCTION(tm3), -+ FUNCTION(wifi02), -+ FUNCTION(wifi12), -+ FUNCTION(qpic_pad5), -+ FUNCTION(smart3), -+ FUNCTION(wcss0_dbg14), -+ FUNCTION(tm4), -+ FUNCTION(wifi04), -+ FUNCTION(wifi14), -+ FUNCTION(qpic_pad6), -+ FUNCTION(wcss0_dbg15), -+ FUNCTION(qdss_tracectl_a), -+ FUNCTION(boot18), -+ FUNCTION(tm5), -+ FUNCTION(qpic_pad7), -+ FUNCTION(atest_char), -+ FUNCTION(wcss0_dbg4), -+ FUNCTION(qdss_traceclk_a), -+ FUNCTION(boot19), -+ FUNCTION(tm6), -+ FUNCTION(wcss0_dbg5), -+ FUNCTION(qdss_cti_trig_out_a0), -+ FUNCTION(boot14), -+ FUNCTION(tm7), -+ FUNCTION(chip_rst), -+ FUNCTION(wcss0_dbg6), -+ FUNCTION(qdss_cti_trig_out_b0), -+ FUNCTION(boot11), -+ FUNCTION(tm8), -+ FUNCTION(wcss0_dbg7), -+ FUNCTION(wcss1_dbg7), -+ FUNCTION(boot20), -+ FUNCTION(tm9), -+ FUNCTION(qpic_pad1), -+ FUNCTION(wcss0_dbg8), -+ FUNCTION(wcss1_dbg8), -+ FUNCTION(qpic_pad2), -+ FUNCTION(wcss0_dbg9), -+ FUNCTION(wcss1_dbg9), -+ FUNCTION(qpic_pad3), -+ FUNCTION(wcss0_dbg10), -+ FUNCTION(wcss1_dbg10), -+ FUNCTION(qpic_pad0), -+ FUNCTION(wcss0_dbg11), -+ FUNCTION(wcss1_dbg11), -+ FUNCTION(qpic_pad8), -+ FUNCTION(wcss0_dbg12), -+ FUNCTION(wcss1_dbg12), -+ FUNCTION(wifi034), -+ FUNCTION(wifi134), -+ FUNCTION(jtag_tdi), - FUNCTION(gpio), -+ FUNCTION(i2s_rx_bclk), -+ FUNCTION(jtag_tck), -+ FUNCTION(i2s_rx_fsync), -+ FUNCTION(jtag_tms), -+ FUNCTION(i2s_rxd), -+ FUNCTION(smart0), -+ FUNCTION(jtag_tdo), -+ FUNCTION(jtag_rst), -+ FUNCTION(jtag_trst), -+ FUNCTION(mdio0), -+ FUNCTION(wcss0_dbg18), -+ FUNCTION(wcss1_dbg18), -+ FUNCTION(qdss_tracedata_a), -+ FUNCTION(mdc), -+ FUNCTION(wcss0_dbg19), -+ FUNCTION(wcss1_dbg19), - FUNCTION(blsp_uart1), -+ FUNCTION(wifi0_uart), -+ FUNCTION(wifi1_uart), -+ FUNCTION(smart1), -+ FUNCTION(wcss0_dbg20), -+ FUNCTION(wcss1_dbg20), -+ FUNCTION(wifi0_uart0), -+ FUNCTION(wifi1_uart0), -+ FUNCTION(wcss0_dbg21), -+ FUNCTION(wcss1_dbg21), - FUNCTION(blsp_i2c0), -+ FUNCTION(wcss0_dbg22), -+ FUNCTION(wcss1_dbg22), -+ FUNCTION(wcss0_dbg23), -+ FUNCTION(wcss1_dbg23), -+ FUNCTION(blsp_spi0), - FUNCTION(blsp_i2c1), -+ FUNCTION(wcss0_dbg24), -+ FUNCTION(wcss1_dbg24), -+ FUNCTION(wcss0_dbg25), -+ FUNCTION(wcss1_dbg25), -+ FUNCTION(wcss0_dbg26), -+ FUNCTION(wcss1_dbg26), -+ FUNCTION(wcss0_dbg), -+ FUNCTION(wcss1_dbg), - FUNCTION(blsp_uart0), -- FUNCTION(blsp_spi1), -- FUNCTION(blsp_spi0), -+ FUNCTION(led0), -+ FUNCTION(wcss0_dbg28), -+ FUNCTION(wcss1_dbg28), -+ FUNCTION(led1), -+ FUNCTION(wcss0_dbg29), -+ FUNCTION(wcss1_dbg29), -+ FUNCTION(wifi0_uart1), -+ FUNCTION(wifi1_uart1), -+ FUNCTION(wcss0_dbg30), -+ FUNCTION(wcss1_dbg30), -+ FUNCTION(wcss0_dbg31), -+ FUNCTION(wcss1_dbg31), -+ FUNCTION(i2s_rx_mclk), -+ FUNCTION(wcss0_dbg16), -+ FUNCTION(wcss1_dbg16), -+ FUNCTION(wcss0_dbg17), -+ FUNCTION(wcss1_dbg17), -+ FUNCTION(rgmii0), -+ FUNCTION(sdio0), -+ FUNCTION(rgmii1), -+ FUNCTION(sdio1), -+ FUNCTION(rgmii2), -+ FUNCTION(i2s_tx_mclk), -+ FUNCTION(sdio2), -+ FUNCTION(rgmii3), -+ FUNCTION(i2s_tx_bclk), -+ FUNCTION(sdio3), -+ FUNCTION(rgmii_rx), -+ FUNCTION(i2s_tx_fsync), -+ FUNCTION(sdio_clk), -+ FUNCTION(rgmii_txc), -+ FUNCTION(i2s_td1), -+ FUNCTION(sdio_cmd), -+ FUNCTION(i2s_td2), -+ FUNCTION(sdio4), -+ FUNCTION(i2s_td3), -+ FUNCTION(sdio5), -+ FUNCTION(audio_pwm0), -+ FUNCTION(sdio6), -+ FUNCTION(audio_pwm1), -+ FUNCTION(wcss0_dbg27), -+ FUNCTION(wcss1_dbg27), -+ FUNCTION(sdio7), -+ FUNCTION(rgmii_rxc), -+ FUNCTION(audio_pwm2), -+ FUNCTION(rgmii_tx), -+ FUNCTION(audio_pwm3), -+ FUNCTION(boot2), -+ FUNCTION(i2s_spdif_in), -+ FUNCTION(i2s_spdif_out), -+ FUNCTION(rmii00), -+ FUNCTION(led2), -+ FUNCTION(rmii01), -+ FUNCTION(wifi0_wci), -+ FUNCTION(wifi1_wci), -+ FUNCTION(boot4), -+ FUNCTION(rmii0_tx), -+ FUNCTION(boot5), -+ FUNCTION(rmii0_rx), -+ FUNCTION(pcie_clk1), -+ FUNCTION(led3), -+ FUNCTION(sdio_cd), - }; - - static const struct msm_pingroup ipq4019_groups[] = { -- PINGROUP(0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(2, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(4, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(5, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(6, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(7, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(8, blsp_uart1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(9, blsp_uart1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(10, blsp_uart1, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(11, blsp_uart1, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(12, blsp_spi0, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(13, blsp_spi0, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(14, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(15, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(16, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(17, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(18, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(19, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(20, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(21, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(22, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(23, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(24, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(25, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(26, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(27, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(28, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(29, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(30, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(31, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(32, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(33, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(34, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(35, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(36, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(37, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(38, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(39, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(40, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(41, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(42, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(43, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(44, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(45, NA, blsp_spi1, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(46, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(47, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(48, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(49, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(50, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(51, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(52, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(53, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(54, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(55, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(56, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(57, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(58, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(59, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(60, NA, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(61, NA, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(62, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(63, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(64, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(65, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(66, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(67, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(68, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(69, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(0, jtag_tdi, smart0, i2s_rx_bclk, NA, NA, NA, NA, NA, NA, NA, -+ NA, NA, NA, NA), -+ PINGROUP(1, jtag_tck, smart0, i2s_rx_fsync, NA, NA, NA, NA, NA, NA, NA, -+ NA, NA, NA, NA), -+ PINGROUP(2, jtag_tms, smart0, i2s_rxd, NA, NA, NA, NA, NA, NA, NA, NA, -+ NA, NA, NA), -+ PINGROUP(3, jtag_tdo, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, -+ NA), -+ PINGROUP(4, jtag_rst, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, -+ NA), -+ PINGROUP(5, jtag_trst, smart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, -+ NA, NA), -+ PINGROUP(6, mdio0, NA, wcss0_dbg18, wcss1_dbg18, NA, qdss_tracedata_a, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(7, mdc, NA, wcss0_dbg19, wcss1_dbg19, NA, qdss_tracedata_a, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(8, blsp_uart1, wifi0_uart, wifi1_uart, smart1, NA, -+ wcss0_dbg20, wcss1_dbg20, NA, qdss_tracedata_a, NA, NA, NA, -+ NA, NA), -+ PINGROUP(9, blsp_uart1, wifi0_uart0, wifi1_uart0, smart1, wifi0_uart, -+ NA, wcss0_dbg21, wcss1_dbg21, NA, qdss_tracedata_a, NA, NA, -+ NA, NA), -+ PINGROUP(10, blsp_uart1, wifi0_uart0, wifi1_uart0, blsp_i2c0, NA, -+ wcss0_dbg22, wcss1_dbg22, NA, qdss_tracedata_a, NA, NA, NA, -+ NA, NA), -+ PINGROUP(11, blsp_uart1, wifi0_uart, wifi1_uart, blsp_i2c0, NA, -+ wcss0_dbg23, wcss1_dbg23, NA, qdss_tracedata_a, NA, NA, NA, -+ NA, NA), -+ PINGROUP(12, blsp_spi0, blsp_i2c1, NA, wcss0_dbg24, wcss1_dbg24, NA, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(13, blsp_spi0, blsp_i2c1, NA, wcss0_dbg25, wcss1_dbg25, NA, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(14, blsp_spi0, NA, wcss0_dbg26, wcss1_dbg26, NA, NA, NA, NA, -+ NA, NA, NA, NA, NA, NA), -+ PINGROUP(15, blsp_spi0, NA, wcss0_dbg, wcss1_dbg, NA, NA, NA, NA, NA, -+ NA, NA, NA, NA, NA), -+ PINGROUP(16, blsp_uart0, led0, smart1, NA, wcss0_dbg28, wcss1_dbg28, -+ NA, qdss_tracedata_a, NA, NA, NA, NA, NA, NA), -+ PINGROUP(17, blsp_uart0, led1, smart1, NA, wcss0_dbg29, wcss1_dbg29, -+ NA, qdss_tracedata_a, NA, NA, NA, NA, NA, NA), -+ PINGROUP(18, wifi0_uart1, wifi1_uart1, NA, wcss0_dbg30, wcss1_dbg30, -+ NA, NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(19, wifi0_uart, wifi1_uart, NA, wcss0_dbg31, wcss1_dbg31, NA, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(20, blsp_i2c0, i2s_rx_mclk, NA, wcss0_dbg16, wcss1_dbg16, NA, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(21, blsp_i2c0, i2s_rx_bclk, NA, wcss0_dbg17, wcss1_dbg17, NA, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(22, rgmii0, i2s_rx_fsync, NA, wcss0_dbg18, wcss1_dbg18, NA, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(23, sdio0, rgmii1, i2s_rxd, NA, wcss0_dbg19, wcss1_dbg19, NA, -+ NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(24, sdio1, rgmii2, i2s_tx_mclk, NA, wcss0_dbg20, wcss1_dbg20, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(25, sdio2, rgmii3, i2s_tx_bclk, NA, wcss0_dbg21, wcss1_dbg21, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(26, sdio3, rgmii_rx, i2s_tx_fsync, NA, wcss0_dbg22, -+ wcss1_dbg22, NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(27, sdio_clk, rgmii_txc, i2s_td1, NA, wcss0_dbg23, -+ wcss1_dbg23, NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(28, sdio_cmd, rgmii0, i2s_td2, NA, wcss0_dbg24, wcss1_dbg24, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(29, sdio4, rgmii1, i2s_td3, NA, wcss0_dbg25, wcss1_dbg25, NA, -+ NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(30, sdio5, rgmii2, audio_pwm0, NA, wcss0_dbg26, wcss1_dbg26, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(31, sdio6, rgmii3, audio_pwm1, NA, wcss0_dbg27, wcss1_dbg27, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(32, sdio7, rgmii_rxc, audio_pwm2, NA, wcss0_dbg28, -+ wcss1_dbg28, NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(33, rgmii_tx, audio_pwm3, NA, wcss0_dbg29, wcss1_dbg29, NA, -+ boot2, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(34, blsp_i2c1, i2s_spdif_in, NA, wcss0_dbg30, wcss1_dbg30, NA, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(35, blsp_i2c1, i2s_spdif_out, NA, wcss0_dbg31, wcss1_dbg31, -+ NA, NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(36, rmii00, led2, led0, NA, NA, NA, NA, NA, NA, NA, NA, NA, -+ NA, NA), -+ PINGROUP(37, rmii01, wifi0_wci, wifi1_wci, led1, NA, NA, wcss0_dbg16, -+ wcss1_dbg16, NA, qdss_tracedata_a, boot4, NA, NA, NA), -+ PINGROUP(38, rmii0_tx, led2, NA, NA, wcss0_dbg17, wcss1_dbg17, NA, -+ qdss_tracedata_a, boot5, NA, NA, NA, NA, NA), -+ PINGROUP(39, rmii0_rx, pcie_clk1, led3, NA, NA, wcss0_dbg18, -+ wcss1_dbg18, NA, NA, qdss_tracedata_a, NA, NA, NA, NA), -+ PINGROUP(40, rmii0_refclk, wifi0_rfsilient0, wifi1_rfsilient0, smart2, -+ led4, NA, NA, wcss0_dbg19, wcss1_dbg19, NA, NA, -+ qdss_tracedata_a, NA, NA), -+ PINGROUP(41, rmii00, wifi0_cal, wifi1_cal, smart2, NA, NA, wcss0_dbg20, -+ wcss1_dbg20, NA, NA, qdss_tracedata_a, NA, NA, NA), -+ PINGROUP(42, rmii01, wifi_wci0, NA, NA, wcss0_dbg21, wcss1_dbg21, NA, -+ NA, qdss_tracedata_a, NA, NA, NA, NA, NA), -+ PINGROUP(43, rmii0_dv, wifi_wci1, NA, NA, wcss0_dbg22, wcss1_dbg22, NA, -+ NA, qdss_tracedata_a, NA, NA, NA, NA, NA), -+ PINGROUP(44, rmii1_refclk, blsp_spi1, smart0, led5, NA, NA, -+ wcss0_dbg23, wcss1_dbg23, NA, NA, NA, NA, NA, NA), -+ PINGROUP(45, rmii10, blsp_spi1, blsp_spi0, smart0, led6, NA, NA, -+ wcss0_dbg24, wcss1_dbg24, NA, NA, NA, NA, NA), -+ PINGROUP(46, rmii11, blsp_spi1, smart0, led7, NA, NA, wcss0_dbg25, -+ wcss1_dbg25, NA, NA, NA, NA, NA, NA), -+ PINGROUP(47, rmii1_dv, blsp_spi1, smart0, led8, NA, NA, wcss0_dbg26, -+ wcss1_dbg26, NA, NA, NA, NA, NA, NA), -+ PINGROUP(48, rmii1_tx, aud_pin, smart2, led9, NA, NA, wcss0_dbg27, -+ wcss1_dbg27, NA, NA, NA, NA, NA, NA), -+ PINGROUP(49, rmii1_rx, aud_pin, smart2, led10, NA, NA, wcss0_dbg28, -+ wcss1_dbg28, NA, NA, NA, NA, NA, NA), -+ PINGROUP(50, rmii10, aud_pin, wifi0_rfsilient1, wifi1_rfsilient1, -+ led11, NA, NA, wcss0_dbg29, wcss1_dbg29, NA, NA, NA, NA, NA), -+ PINGROUP(51, rmii11, aud_pin, wifi0_cal, wifi1_cal, NA, NA, -+ wcss0_dbg30, wcss1_dbg30, NA, boot7, NA, NA, NA, NA), -+ PINGROUP(52, qpic_pad, mdc, pcie_clk, i2s_tx_mclk, NA, NA, wcss0_dbg31, -+ tm_clk0, wifi00, wifi10, NA, NA, NA, NA), -+ PINGROUP(53, qpic_pad, mdio1, i2s_tx_bclk, prng_rosc, dbg_out, tm0, -+ wifi01, wifi11, NA, NA, NA, NA, NA, NA), -+ PINGROUP(54, qpic_pad, blsp_spi0, i2s_td1, atest_char3, pmu0, NA, NA, -+ boot8, tm1, NA, NA, NA, NA, NA), -+ PINGROUP(55, qpic_pad, blsp_spi0, i2s_td2, atest_char2, pmu1, NA, NA, -+ boot9, tm2, NA, NA, NA, NA, NA), -+ PINGROUP(56, qpic_pad, blsp_spi0, i2s_td3, atest_char1, NA, tm_ack, -+ wifi03, wifi13, NA, NA, NA, NA, NA, NA), -+ PINGROUP(57, qpic_pad4, blsp_spi0, i2s_tx_fsync, atest_char0, NA, tm3, -+ wifi02, wifi12, NA, NA, NA, NA, NA, NA), -+ PINGROUP(58, qpic_pad5, led2, blsp_i2c0, smart3, smart1, i2s_rx_mclk, -+ NA, wcss0_dbg14, tm4, wifi04, wifi14, NA, NA, NA), -+ PINGROUP(59, qpic_pad6, blsp_i2c0, smart3, smart1, i2s_spdif_in, NA, -+ NA, wcss0_dbg15, qdss_tracectl_a, boot18, tm5, NA, NA, NA), -+ PINGROUP(60, qpic_pad7, blsp_uart0, smart1, smart3, led0, i2s_tx_bclk, -+ i2s_rx_bclk, atest_char, NA, wcss0_dbg4, qdss_traceclk_a, -+ boot19, tm6, NA), -+ PINGROUP(61, qpic_pad, blsp_uart0, smart1, smart3, led1, i2s_tx_fsync, -+ i2s_rx_fsync, NA, NA, wcss0_dbg5, qdss_cti_trig_out_a0, -+ boot14, tm7, NA), -+ PINGROUP(62, qpic_pad, chip_rst, wifi0_uart, wifi1_uart, i2s_spdif_out, -+ NA, NA, wcss0_dbg6, qdss_cti_trig_out_b0, boot11, tm8, NA, NA, -+ NA), -+ PINGROUP(63, qpic_pad, wifi0_uart1, wifi1_uart1, wifi1_uart, i2s_td1, -+ i2s_rxd, i2s_spdif_out, i2s_spdif_in, NA, wcss0_dbg7, -+ wcss1_dbg7, boot20, tm9, NA), -+ PINGROUP(64, qpic_pad1, audio_pwm0, NA, wcss0_dbg8, wcss1_dbg8, NA, NA, -+ NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(65, qpic_pad2, audio_pwm1, NA, wcss0_dbg9, wcss1_dbg9, NA, NA, -+ NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(66, qpic_pad3, audio_pwm2, NA, wcss0_dbg10, wcss1_dbg10, NA, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(67, qpic_pad0, audio_pwm3, NA, wcss0_dbg11, wcss1_dbg11, NA, -+ NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(68, qpic_pad8, NA, wcss0_dbg12, wcss1_dbg12, NA, NA, NA, NA, -+ NA, NA, NA, NA, NA, NA), -+ PINGROUP(69, qpic_pad, NA, wcss0_dbg, NA, NA, NA, NA, NA, NA, NA, NA, -+ NA, NA, NA), - PINGROUP(70, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), - PINGROUP(71, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), - PINGROUP(72, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -@@ -433,7 +1526,8 @@ static const struct msm_pingroup ipq4019 - PINGROUP(95, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), - PINGROUP(96, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), - PINGROUP(97, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -- PINGROUP(98, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), -+ PINGROUP(98, wifi034, wifi134, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, -+ NA, NA), - PINGROUP(99, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), - }; - -@@ -460,6 +1554,7 @@ static const struct of_device_id ipq4019 - static struct platform_driver ipq4019_pinctrl_driver = { - .driver = { - .name = "ipq4019-pinctrl", -+ .owner = THIS_MODULE, - .of_match_table = ipq4019_pinctrl_of_match, - }, - .probe = ipq4019_pinctrl_probe, diff --git a/target/linux/ipq806x/patches-4.9/859-msm-pinctrl-Add-support-to-configure-ipq40xx-GPIO_PU.patch b/target/linux/ipq806x/patches-4.9/859-msm-pinctrl-Add-support-to-configure-ipq40xx-GPIO_PU.patch deleted file mode 100644 index 07cf01b26844..000000000000 --- a/target/linux/ipq806x/patches-4.9/859-msm-pinctrl-Add-support-to-configure-ipq40xx-GPIO_PU.patch +++ /dev/null @@ -1,236 +0,0 @@ -From e77af7de404eb464f7da9e0daeb8b362cc66a7ba Mon Sep 17 00:00:00 2001 -From: Ram Chandra Jangir -Date: Tue, 9 May 2017 11:45:00 +0530 -Subject: [PATCH] msm: pinctrl: Add support to configure ipq40xx GPIO_PULL bits - -GPIO_PULL bits configurations in TLMM_GPIO_CFG register -differs for IPQ40xx from rest of the other qcom SoC's. -This change add support to configure the msm_gpio_pull -bits for ipq40xx, It is required to fix the proper -configurations of gpio-pull bits for nand pins mux. - -IPQ40xx SoC: -2'b10: Internal pull up enable. -2'b11: Unsupport - -For other SoC's: -2'b10: Keeper -2'b11: Pull-Up - -Signed-off-by: Ram Chandra Jangir ---- - drivers/pinctrl/qcom/pinctrl-apq8064.c | 1 + - drivers/pinctrl/qcom/pinctrl-apq8084.c | 1 + - drivers/pinctrl/qcom/pinctrl-ipq4019.c | 8 ++++++++ - drivers/pinctrl/qcom/pinctrl-ipq8064.c | 1 + - drivers/pinctrl/qcom/pinctrl-mdm9615.c | 1 + - drivers/pinctrl/qcom/pinctrl-msm.c | 21 ++++++++------------- - drivers/pinctrl/qcom/pinctrl-msm.h | 19 +++++++++++++++++++ - drivers/pinctrl/qcom/pinctrl-msm8660.c | 1 + - drivers/pinctrl/qcom/pinctrl-msm8916.c | 1 + - drivers/pinctrl/qcom/pinctrl-msm8960.c | 1 + - drivers/pinctrl/qcom/pinctrl-msm8x74.c | 1 + - 11 files changed, 43 insertions(+), 13 deletions(-) - ---- a/drivers/pinctrl/qcom/pinctrl-apq8064.c -+++ b/drivers/pinctrl/qcom/pinctrl-apq8064.c -@@ -597,6 +597,7 @@ static const struct msm_pinctrl_soc_data - .groups = apq8064_groups, - .ngroups = ARRAY_SIZE(apq8064_groups), - .ngpios = NUM_GPIO_PINGROUPS, -+ .gpio_pull = &msm_gpio_pull, - }; - - static int apq8064_pinctrl_probe(struct platform_device *pdev) ---- a/drivers/pinctrl/qcom/pinctrl-apq8084.c -+++ b/drivers/pinctrl/qcom/pinctrl-apq8084.c -@@ -1206,6 +1206,7 @@ static const struct msm_pinctrl_soc_data - .groups = apq8084_groups, - .ngroups = ARRAY_SIZE(apq8084_groups), - .ngpios = NUM_GPIO_PINGROUPS, -+ .gpio_pull = &msm_gpio_pull, - }; - - static int apq8084_pinctrl_probe(struct platform_device *pdev) ---- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c -+++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c -@@ -1531,6 +1531,13 @@ static const struct msm_pingroup ipq4019 - PINGROUP(99, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA), - }; - -+static const struct msm_pinctrl_gpio_pull ipq4019_gpio_pull = { -+ .no_pull = 0, -+ .pull_down = 1, -+ .keeper = 0, -+ .pull_up = 2, -+}; -+ - static const struct msm_pinctrl_soc_data ipq4019_pinctrl = { - .pins = ipq4019_pins, - .npins = ARRAY_SIZE(ipq4019_pins), -@@ -1539,6 +1546,7 @@ static const struct msm_pinctrl_soc_data - .groups = ipq4019_groups, - .ngroups = ARRAY_SIZE(ipq4019_groups), - .ngpios = 100, -+ .gpio_pull = &ipq4019_gpio_pull, - }; - - static int ipq4019_pinctrl_probe(struct platform_device *pdev) ---- a/drivers/pinctrl/qcom/pinctrl-ipq8064.c -+++ b/drivers/pinctrl/qcom/pinctrl-ipq8064.c -@@ -630,6 +630,7 @@ static const struct msm_pinctrl_soc_data - .groups = ipq8064_groups, - .ngroups = ARRAY_SIZE(ipq8064_groups), - .ngpios = NUM_GPIO_PINGROUPS, -+ .gpio_pull = &msm_gpio_pull, - }; - - static int ipq8064_pinctrl_probe(struct platform_device *pdev) ---- a/drivers/pinctrl/qcom/pinctrl-mdm9615.c -+++ b/drivers/pinctrl/qcom/pinctrl-mdm9615.c -@@ -444,6 +444,7 @@ static const struct msm_pinctrl_soc_data - .groups = mdm9615_groups, - .ngroups = ARRAY_SIZE(mdm9615_groups), - .ngpios = NUM_GPIO_PINGROUPS, -+ .gpio_pull = &msm_gpio_pull, - }; - - static int mdm9615_pinctrl_probe(struct platform_device *pdev) ---- a/drivers/pinctrl/qcom/pinctrl-msm.c -+++ b/drivers/pinctrl/qcom/pinctrl-msm.c -@@ -203,11 +203,6 @@ static int msm_config_reg(struct msm_pin - return 0; - } - --#define MSM_NO_PULL 0 --#define MSM_PULL_DOWN 1 --#define MSM_KEEPER 2 --#define MSM_PULL_UP 3 -- - static unsigned msm_regval_to_drive(u32 val) - { - return (val + 1) * 2; -@@ -238,16 +233,16 @@ static int msm_config_group_get(struct p - /* Convert register value to pinconf value */ - switch (param) { - case PIN_CONFIG_BIAS_DISABLE: -- arg = arg == MSM_NO_PULL; -+ arg = arg == pctrl->soc->gpio_pull->no_pull; - break; - case PIN_CONFIG_BIAS_PULL_DOWN: -- arg = arg == MSM_PULL_DOWN; -+ arg = arg == pctrl->soc->gpio_pull->pull_down; - break; - case PIN_CONFIG_BIAS_BUS_HOLD: -- arg = arg == MSM_KEEPER; -+ arg = arg == pctrl->soc->gpio_pull->keeper; - break; - case PIN_CONFIG_BIAS_PULL_UP: -- arg = arg == MSM_PULL_UP; -+ arg = arg == pctrl->soc->gpio_pull->pull_up; - break; - case PIN_CONFIG_DRIVE_STRENGTH: - arg = msm_regval_to_drive(arg); -@@ -304,16 +299,16 @@ static int msm_config_group_set(struct p - /* Convert pinconf values to register values */ - switch (param) { - case PIN_CONFIG_BIAS_DISABLE: -- arg = MSM_NO_PULL; -+ arg = pctrl->soc->gpio_pull->no_pull; - break; - case PIN_CONFIG_BIAS_PULL_DOWN: -- arg = MSM_PULL_DOWN; -+ arg = pctrl->soc->gpio_pull->pull_down; - break; - case PIN_CONFIG_BIAS_BUS_HOLD: -- arg = MSM_KEEPER; -+ arg = pctrl->soc->gpio_pull->keeper; - break; - case PIN_CONFIG_BIAS_PULL_UP: -- arg = MSM_PULL_UP; -+ arg = pctrl->soc->gpio_pull->pull_up; - break; - case PIN_CONFIG_DRIVE_STRENGTH: - /* Check for invalid values */ ---- a/drivers/pinctrl/qcom/pinctrl-msm.h -+++ b/drivers/pinctrl/qcom/pinctrl-msm.h -@@ -98,6 +98,16 @@ struct msm_pingroup { - }; - - /** -+ * struct msm_pinctrl_gpio_pull - pinctrl pull value bit field descriptor -+ */ -+struct msm_pinctrl_gpio_pull { -+ unsigned no_pull; -+ unsigned pull_down; -+ unsigned keeper; -+ unsigned pull_up; -+}; -+ -+/** - * struct msm_pinctrl_soc_data - Qualcomm pin controller driver configuration - * @pins: An array describing all pins the pin controller affects. - * @npins: The number of entries in @pins. -@@ -106,6 +116,7 @@ struct msm_pingroup { - * @groups: An array describing all pin groups the pin SoC supports. - * @ngroups: The numbmer of entries in @groups. - * @ngpio: The number of pingroups the driver should expose as GPIOs. -+ * @gpio_pull_val: The pull value bit field descriptor. - */ - struct msm_pinctrl_soc_data { - const struct pinctrl_pin_desc *pins; -@@ -115,6 +126,14 @@ struct msm_pinctrl_soc_data { - const struct msm_pingroup *groups; - unsigned ngroups; - unsigned ngpios; -+ const struct msm_pinctrl_gpio_pull *gpio_pull; -+}; -+ -+static const struct msm_pinctrl_gpio_pull msm_gpio_pull = { -+ .no_pull = 0, -+ .pull_down = 1, -+ .keeper = 2, -+ .pull_up = 3, - }; - - int msm_pinctrl_probe(struct platform_device *pdev, ---- a/drivers/pinctrl/qcom/pinctrl-msm8660.c -+++ b/drivers/pinctrl/qcom/pinctrl-msm8660.c -@@ -979,6 +979,7 @@ static const struct msm_pinctrl_soc_data - .groups = msm8660_groups, - .ngroups = ARRAY_SIZE(msm8660_groups), - .ngpios = NUM_GPIO_PINGROUPS, -+ .gpio_pull = &msm_gpio_pull, - }; - - static int msm8660_pinctrl_probe(struct platform_device *pdev) ---- a/drivers/pinctrl/qcom/pinctrl-msm8916.c -+++ b/drivers/pinctrl/qcom/pinctrl-msm8916.c -@@ -967,6 +967,7 @@ static const struct msm_pinctrl_soc_data - .groups = msm8916_groups, - .ngroups = ARRAY_SIZE(msm8916_groups), - .ngpios = NUM_GPIO_PINGROUPS, -+ .gpio_pull = &msm_gpio_pull, - }; - - static int msm8916_pinctrl_probe(struct platform_device *pdev) ---- a/drivers/pinctrl/qcom/pinctrl-msm8960.c -+++ b/drivers/pinctrl/qcom/pinctrl-msm8960.c -@@ -1244,6 +1244,7 @@ static const struct msm_pinctrl_soc_data - .groups = msm8960_groups, - .ngroups = ARRAY_SIZE(msm8960_groups), - .ngpios = NUM_GPIO_PINGROUPS, -+ .gpio_pull = &msm_gpio_pull, - }; - - static int msm8960_pinctrl_probe(struct platform_device *pdev) ---- a/drivers/pinctrl/qcom/pinctrl-msm8x74.c -+++ b/drivers/pinctrl/qcom/pinctrl-msm8x74.c -@@ -1069,6 +1069,7 @@ static const struct msm_pinctrl_soc_data - .groups = msm8x74_groups, - .ngroups = ARRAY_SIZE(msm8x74_groups), - .ngpios = NUM_GPIO_PINGROUPS, -+ .gpio_pull = &msm_gpio_pull, - }; - - static int msm8x74_pinctrl_probe(struct platform_device *pdev) diff --git a/target/linux/ipq806x/patches-4.9/860-qcom-mtd-nand-Add-bam_dma-support-in-qcom_nand-drive.patch b/target/linux/ipq806x/patches-4.9/860-qcom-mtd-nand-Add-bam_dma-support-in-qcom_nand-drive.patch deleted file mode 100644 index 5a3c02c700b6..000000000000 --- a/target/linux/ipq806x/patches-4.9/860-qcom-mtd-nand-Add-bam_dma-support-in-qcom_nand-drive.patch +++ /dev/null @@ -1,370 +0,0 @@ -From 074036f9de6b8c5fc642e8e2540950f6a35aa804 Mon Sep 17 00:00:00 2001 -From: Ram Chandra Jangir -Date: Thu, 20 Apr 2017 10:31:10 +0530 -Subject: [PATCH] qcom: mtd: nand: Add bam_dma support in qcom_nand driver - -The current driver only support ADM DMA so this patch adds the -BAM DMA support in current NAND driver with compatible string -qcom,ebi2-nandc-bam. -Added bam channels and data buffers, NAND BAM uses 3 channels: -command, data tx and data rx, while ADM uses only single channel. -So this patch adds the BAM channel in device tree and using the -same in NAND driver allocation function. - -Signed-off-by: Ram Chandra Jangir ---- - .../devicetree/bindings/mtd/qcom_nandc.txt | 69 +++++++-- - drivers/mtd/nand/qcom_nandc.c | 160 +++++++++++++++++---- - 2 files changed, 190 insertions(+), 39 deletions(-) - ---- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt -+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt -@@ -1,21 +1,26 @@ - * Qualcomm NAND controller - - Required properties: --- compatible: should be "qcom,ipq806x-nand" -+- compatible: "qcom,ipq806x-nand" for IPQ8064 which uses -+ ADM DMA. -+ "qcom,ebi2-nand-bam" - nand drivers using BAM DMA -+ like IPQ4019. - - reg: MMIO address range - - clocks: must contain core clock and always on clock - - clock-names: must contain "core" for the core clock and "aon" for the - always on clock - - dmas: DMA specifier, consisting of a phandle to the ADM DMA -- controller node and the channel number to be used for -- NAND. Refer to dma.txt and qcom_adm.txt for more details --- dma-names: must be "rxtx" --- qcom,cmd-crci: must contain the ADM command type CRCI block instance -- number specified for the NAND controller on the given -- platform --- qcom,data-crci: must contain the ADM data type CRCI block instance -- number specified for the NAND controller on the given -- platform -+ or BAM DMA controller node and the channel number to -+ be used for NAND. Refer to dma.txt, qcom_adm.txt(ADM) -+ and qcom_bam_dma.txt(BAM) for more details -+- dma-names: "rxtx" - ADM -+ "tx", "rx", "cmd" - BAM -+- qcom,cmd-crci: Only required for ADM DMA. must contain the ADM command -+ type CRCI block instance number specified for the NAND -+ controller on the given platform. -+- qcom,data-crci: Only required for ADM DMA. must contain the ADM data -+ type CRCI block instance number specified for the NAND -+ controller on the given platform. - - #address-cells: <1> - subnodes give the chip-select number - - #size-cells: <0> - -@@ -44,7 +49,7 @@ partition.txt for more detail. - Example: - - nand@1ac00000 { -- compatible = "qcom,ebi2-nandc"; -+ compatible = "qcom,ipq806x-nand","qcom.qcom_nand"; - reg = <0x1ac00000 0x800>; - - clocks = <&gcc EBI2_CLK>, -@@ -58,6 +63,48 @@ nand@1ac00000 { - - #address-cells = <1>; - #size-cells = <0>; -+ -+ nandcs@0 { -+ compatible = "qcom,nandcs"; -+ reg = <0>; -+ -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ nand-bus-width = <8>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "boot-nand"; -+ reg = <0 0x58a0000>; -+ }; -+ -+ partition@58a0000 { -+ label = "fs-nand"; -+ reg = <0x58a0000 0x4000000>; -+ }; -+ }; -+ }; -+}; -+ -+nand@79B0000 { -+ compatible = "qcom,ebi2-nandc-bam"; -+ reg = <0x79B0000 0x1000>; -+ -+ clocks = <&gcc EBI2_CLK>, -+ <&gcc EBI2_AON_CLK>; -+ clock-names = "core", "aon"; -+ -+ dmas = <&qpicbam 0>, -+ <&qpicbam 1>, -+ <&qpicbam 2>; -+ dma-names = "tx", "rx", "cmd"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; - - nandcs@0 { - compatible = "qcom,nandcs"; ---- a/drivers/mtd/nand/qcom_nandc.c -+++ b/drivers/mtd/nand/qcom_nandc.c -@@ -234,6 +234,7 @@ struct nandc_regs { - * by upper layers directly - * @buf_size/count/start: markers for chip->read_buf/write_buf functions - * @reg_read_buf: local buffer for reading back registers via DMA -+ * @reg_read_buf_phys: contains dma address for register read buffer - * @reg_read_pos: marker for data read in reg_read_buf - * - * @regs: a contiguous chunk of memory for DMA register -@@ -242,7 +243,10 @@ struct nandc_regs { - * @cmd1/vld: some fixed controller register values - * @ecc_modes: supported ECC modes by the current controller, - * initialized via DT match data -- */ -+ * @bch_enabled: flag to tell whether BCH or RS ECC mode is used -+ * @dma_bam_enabled: flag to tell whether nand controller is using -+ * bam dma -+*/ - struct qcom_nand_controller { - struct nand_hw_control controller; - struct list_head host_list; -@@ -255,17 +259,28 @@ struct qcom_nand_controller { - struct clk *core_clk; - struct clk *aon_clk; - -- struct dma_chan *chan; -- unsigned int cmd_crci; -- unsigned int data_crci; - struct list_head desc_list; -+ union { -+ struct { -+ struct dma_chan *tx_chan; -+ struct dma_chan *rx_chan; -+ struct dma_chan *cmd_chan; -+ }; -+ struct { -+ struct dma_chan *chan; -+ unsigned int cmd_crci; -+ unsigned int data_crci; -+ }; -+ }; - - u8 *data_buffer; -+ bool dma_bam_enabled; - int buf_size; - int buf_count; - int buf_start; - - __le32 *reg_read_buf; -+ dma_addr_t reg_read_buf_phys; - int reg_read_pos; - - struct nandc_regs *regs; -@@ -324,6 +339,17 @@ struct qcom_nand_host { - u32 clrreadstatus; - }; - -+/* -+ * This data type corresponds to the nand driver data which will be used at -+ * driver probe time -+ * @ecc_modes - ecc mode for nand -+ * @dma_bam_enabled - whether this driver is using bam -+ */ -+struct qcom_nand_driver_data { -+ u32 ecc_modes; -+ bool dma_bam_enabled; -+}; -+ - static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip) - { - return container_of(chip, struct qcom_nand_host, chip); -@@ -1949,16 +1975,46 @@ static int qcom_nandc_alloc(struct qcom_ - if (!nandc->regs) - return -ENOMEM; - -- nandc->reg_read_buf = devm_kzalloc(nandc->dev, -- MAX_REG_RD * sizeof(*nandc->reg_read_buf), -- GFP_KERNEL); -- if (!nandc->reg_read_buf) -- return -ENOMEM; -+ if (!nandc->dma_bam_enabled) { -+ nandc->reg_read_buf = devm_kzalloc(nandc->dev, -+ MAX_REG_RD * -+ sizeof(*nandc->reg_read_buf), -+ GFP_KERNEL); - -- nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx"); -- if (!nandc->chan) { -- dev_err(nandc->dev, "failed to request slave channel\n"); -- return -ENODEV; -+ if (!nandc->reg_read_buf) -+ return -ENOMEM; -+ -+ nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx"); -+ if (!nandc->chan) { -+ dev_err(nandc->dev, "failed to request slave channel\n"); -+ return -ENODEV; -+ } -+ } else { -+ nandc->reg_read_buf = dmam_alloc_coherent(nandc->dev, -+ MAX_REG_RD * -+ sizeof(*nandc->reg_read_buf), -+ &nandc->reg_read_buf_phys, GFP_KERNEL); -+ -+ if (!nandc->reg_read_buf) -+ return -ENOMEM; -+ -+ nandc->tx_chan = dma_request_slave_channel(nandc->dev, "tx"); -+ if (!nandc->tx_chan) { -+ dev_err(nandc->dev, "failed to request tx channel\n"); -+ return -ENODEV; -+ } -+ -+ nandc->rx_chan = dma_request_slave_channel(nandc->dev, "rx"); -+ if (!nandc->rx_chan) { -+ dev_err(nandc->dev, "failed to request rx channel\n"); -+ return -ENODEV; -+ } -+ -+ nandc->cmd_chan = dma_request_slave_channel(nandc->dev, "cmd"); -+ if (!nandc->cmd_chan) { -+ dev_err(nandc->dev, "failed to request cmd channel\n"); -+ return -ENODEV; -+ } - } - - INIT_LIST_HEAD(&nandc->desc_list); -@@ -1971,8 +2027,35 @@ static int qcom_nandc_alloc(struct qcom_ - - static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc) - { -- dma_release_channel(nandc->chan); --} -+ if (nandc->dma_bam_enabled) { -+ if (nandc->tx_chan) -+ dma_release_channel(nandc->tx_chan); -+ -+ if (nandc->rx_chan) -+ dma_release_channel(nandc->rx_chan); -+ -+ if (nandc->cmd_chan) -+ dma_release_channel(nandc->tx_chan); -+ -+ if (nandc->reg_read_buf) -+ dmam_free_coherent(nandc->dev, MAX_REG_RD * -+ sizeof(*nandc->reg_read_buf), -+ nandc->reg_read_buf, -+ nandc->reg_read_buf_phys); -+ } else { -+ if (nandc->chan) -+ dma_release_channel(nandc->chan); -+ -+ if (nandc->reg_read_buf) -+ devm_kfree(nandc->dev, nandc->reg_read_buf); -+ } -+ -+ if (nandc->regs) -+ devm_kfree(nandc->dev, nandc->regs); -+ -+ if (nandc->data_buffer) -+ devm_kfree(nandc->dev, nandc->data_buffer); -+ } - - /* one time setup of a few nand controller registers */ - static int qcom_nandc_setup(struct qcom_nand_controller *nandc) -@@ -2010,6 +2093,8 @@ static int qcom_nand_host_init(struct qc - mtd->name = devm_kasprintf(dev, GFP_KERNEL, "qcom_nand.%d", host->cs); - mtd->owner = THIS_MODULE; - mtd->dev.parent = dev; -+ mtd->priv = chip; -+ chip->priv = nandc; - - chip->cmdfunc = qcom_nandc_command; - chip->select_chip = qcom_nandc_select_chip; -@@ -2057,16 +2142,20 @@ static int qcom_nandc_parse_dt(struct pl - struct device_node *np = nandc->dev->of_node; - int ret; - -- ret = of_property_read_u32(np, "qcom,cmd-crci", &nandc->cmd_crci); -- if (ret) { -- dev_err(nandc->dev, "command CRCI unspecified\n"); -- return ret; -- } -+ if (!nandc->dma_bam_enabled) { -+ ret = of_property_read_u32(np, "qcom,cmd-crci", -+ &nandc->cmd_crci); -+ if (ret) { -+ dev_err(nandc->dev, "command CRCI unspecified\n"); -+ return ret; -+ } - -- ret = of_property_read_u32(np, "qcom,data-crci", &nandc->data_crci); -- if (ret) { -- dev_err(nandc->dev, "data CRCI unspecified\n"); -- return ret; -+ ret = of_property_read_u32(np, "qcom,data-crci", -+ &nandc->data_crci); -+ if (ret) { -+ dev_err(nandc->dev, "data CRCI unspecified\n"); -+ return ret; -+ } - } - - return 0; -@@ -2081,6 +2170,7 @@ static int qcom_nandc_probe(struct platf - struct device_node *dn = dev->of_node, *child; - struct resource *res; - int ret; -+ struct qcom_nand_driver_data *driver_data; - - nandc = devm_kzalloc(&pdev->dev, sizeof(*nandc), GFP_KERNEL); - if (!nandc) -@@ -2095,7 +2185,10 @@ static int qcom_nandc_probe(struct platf - return -ENODEV; - } - -- nandc->ecc_modes = (unsigned long)dev_data; -+ driver_data = (struct qcom_nand_driver_data *)dev_data; -+ -+ nandc->ecc_modes = driver_data->ecc_modes; -+ nandc->dma_bam_enabled = driver_data->dma_bam_enabled; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - nandc->base = devm_ioremap_resource(dev, res); -@@ -2187,7 +2280,15 @@ static int qcom_nandc_remove(struct plat - return 0; - } - --#define EBI2_NANDC_ECC_MODES (ECC_RS_4BIT | ECC_BCH_8BIT) -+struct qcom_nand_driver_data ebi2_nandc_bam_data = { -+ .ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT), -+ .dma_bam_enabled = true, -+}; -+ -+struct qcom_nand_driver_data ebi2_nandc_data = { -+ .ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT), -+ .dma_bam_enabled = false, -+}; - - /* - * data will hold a struct pointer containing more differences once we support -@@ -2195,7 +2296,10 @@ static int qcom_nandc_remove(struct plat - */ - static const struct of_device_id qcom_nandc_of_match[] = { - { .compatible = "qcom,ipq806x-nand", -- .data = (void *)EBI2_NANDC_ECC_MODES, -+ .data = (void *) &ebi2_nandc_data, -+ }, -+ { .compatible = "qcom,ebi2-nandc-bam", -+ .data = (void *) &ebi2_nandc_bam_data, - }, - {} - }; diff --git a/target/linux/ipq806x/patches-4.9/861-qcom-mtd-nand-Added-bam-transaction-and-support-addi.patch b/target/linux/ipq806x/patches-4.9/861-qcom-mtd-nand-Added-bam-transaction-and-support-addi.patch deleted file mode 100644 index 4b9f672205ed..000000000000 --- a/target/linux/ipq806x/patches-4.9/861-qcom-mtd-nand-Added-bam-transaction-and-support-addi.patch +++ /dev/null @@ -1,1267 +0,0 @@ -From 645c7805f2602569263d7ac78050b2c9e91e3377 Mon Sep 17 00:00:00 2001 -From: Ram Chandra Jangir -Date: Thu, 20 Apr 2017 10:23:00 +0530 -Subject: [PATCH] qcom: mtd: nand: Added bam transaction and support - additional CSRs - -This patch adds the following for NAND BAM DMA support - - Bam transaction which will be used for any NAND request. - It contains the array of command elements, command and - data sgl. This transaction will be resetted before every - request. - - Allocation function for NAND BAM transaction which will be - called only once at probe time. - - Reset function for NAND BAM transaction which will be called - before any new NAND request. - - Add support for additional CSRs. - NAND_READ_LOCATION - page offset for reading in BAM DMA mode - NAND_ERASED_CW_DETECT_CFG - status for erased code words - NAND_BUFFER_STATUS - status for ECC - -Signed-off-by: Abhishek Sahu -Signed-off-by: Ram Chandra Jangir ---- - drivers/mtd/nand/qcom_nandc.c | 631 +++++++++++++++++++++++++++++++++++---- - include/linux/dma/qcom_bam_dma.h | 149 +++++++++ - 2 files changed, 721 insertions(+), 59 deletions(-) - create mode 100644 include/linux/dma/qcom_bam_dma.h - ---- a/drivers/mtd/nand/qcom_nandc.c -+++ b/drivers/mtd/nand/qcom_nandc.c -@@ -22,6 +22,7 @@ - #include - #include - #include -+#include - - /* NANDc reg offsets */ - #define NAND_FLASH_CMD 0x00 -@@ -53,6 +54,8 @@ - #define NAND_VERSION 0xf08 - #define NAND_READ_LOCATION_0 0xf20 - #define NAND_READ_LOCATION_1 0xf24 -+#define NAND_READ_LOCATION_2 0xf28 -+#define NAND_READ_LOCATION_3 0xf2c - - /* dummy register offsets, used by write_reg_dma */ - #define NAND_DEV_CMD1_RESTORE 0xdead -@@ -135,6 +138,11 @@ - #define ERASED_PAGE (PAGE_ALL_ERASED | PAGE_ERASED) - #define ERASED_CW (CODEWORD_ALL_ERASED | CODEWORD_ERASED) - -+/* NAND_READ_LOCATION_n bits */ -+#define READ_LOCATION_OFFSET 0 -+#define READ_LOCATION_SIZE 16 -+#define READ_LOCATION_LAST 31 -+ - /* Version Mask */ - #define NAND_VERSION_MAJOR_MASK 0xf0000000 - #define NAND_VERSION_MAJOR_SHIFT 28 -@@ -156,6 +164,9 @@ - #define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \ - ERASE_START_VLD | SEQ_READ_START_VLD) - -+/* NAND_CTRL bits */ -+#define BAM_MODE_EN BIT(0) -+ - /* - * the NAND controller performs reads/writes with ECC in 516 byte chunks. - * the driver calls the chunks 'step' or 'codeword' interchangeably -@@ -177,12 +188,77 @@ - #define ECC_BCH_4BIT BIT(2) - #define ECC_BCH_8BIT BIT(3) - -+/* Flags used for BAM DMA desc preparation*/ -+/* Don't set the EOT in current tx sgl */ -+#define DMA_DESC_FLAG_NO_EOT (0x0001) -+/* Set the NWD flag in current sgl */ -+#define DMA_DESC_FLAG_BAM_NWD (0x0002) -+/* Close current sgl and start writing in another sgl */ -+#define DMA_DESC_FLAG_BAM_NEXT_SGL (0x0004) -+/* -+ * Erased codeword status is being used two times in single transfer so this -+ * flag will determine the current value of erased codeword status register -+ */ -+#define DMA_DESC_ERASED_CW_SET (0x0008) -+ -+/* Returns the dma address for reg read buffer */ -+#define REG_BUF_DMA_ADDR(chip, vaddr) \ -+ ((chip)->reg_read_buf_phys + \ -+ ((uint8_t *)(vaddr) - (uint8_t *)(chip)->reg_read_buf)) -+ -+/* Returns the nand register physical address */ -+#define NAND_REG_PHYS_ADDRESS(chip, addr) \ -+ ((chip)->base_dma + (addr)) -+ -+/* command element array size in bam transaction */ -+#define BAM_CMD_ELEMENT_SIZE (256) -+/* command sgl size in bam transaction */ -+#define BAM_CMD_SGL_SIZE (256) -+/* data sgl size in bam transaction */ -+#define BAM_DATA_SGL_SIZE (128) -+ -+/* -+ * This data type corresponds to the BAM transaction which will be used for any -+ * nand request. -+ * @bam_ce - the array of bam command elements -+ * @cmd_sgl - sgl for nand bam command pipe -+ * @tx_sgl - sgl for nand bam consumer pipe -+ * @rx_sgl - sgl for nand bam producer pipe -+ * @bam_ce_index - the index in bam_ce which is available for next sgl request -+ * @pre_bam_ce_index - the index in bam_ce which marks the start position ce -+ * for current sgl. It will be used for size calculation -+ * for current sgl -+ * @cmd_sgl_cnt - no of entries in command sgl. -+ * @tx_sgl_cnt - no of entries in tx sgl. -+ * @rx_sgl_cnt - no of entries in rx sgl. -+ */ -+struct bam_transaction { -+ struct bam_cmd_element bam_ce[BAM_CMD_ELEMENT_SIZE]; -+ struct qcom_bam_sgl cmd_sgl[BAM_CMD_SGL_SIZE]; -+ struct qcom_bam_sgl tx_sgl[BAM_DATA_SGL_SIZE]; -+ struct qcom_bam_sgl rx_sgl[BAM_DATA_SGL_SIZE]; -+ uint32_t bam_ce_index; -+ uint32_t pre_bam_ce_index; -+ uint32_t cmd_sgl_cnt; -+ uint32_t tx_sgl_cnt; -+ uint32_t rx_sgl_cnt; -+}; -+ -+/** -+ * This data type corresponds to the nand dma descriptor -+ * @list - list for desc_info -+ * @dir - DMA transfer direction -+ * @sgl - sgl which will be used for single sgl dma descriptor -+ * @dma_desc - low level dma engine descriptor -+ * @bam_desc_data - used for bam desc mappings -+ */ - struct desc_info { - struct list_head node; - - enum dma_data_direction dir; - struct scatterlist sgl; - struct dma_async_tx_descriptor *dma_desc; -+ struct qcom_bam_custom_data bam_desc_data; - }; - - /* -@@ -210,6 +286,13 @@ struct nandc_regs { - __le32 orig_vld; - - __le32 ecc_buf_cfg; -+ __le32 read_location0; -+ __le32 read_location1; -+ __le32 read_location2; -+ __le32 read_location3; -+ -+ __le32 erased_cw_detect_cfg_clr; -+ __le32 erased_cw_detect_cfg_set; - }; - - /* -@@ -225,6 +308,7 @@ struct nandc_regs { - * @aon_clk: another controller clock - * - * @chan: dma channel -+ * @bam_txn: contains the bam transaction address - * @cmd_crci: ADM DMA CRCI for command flow control - * @data_crci: ADM DMA CRCI for data flow control - * @desc_list: DMA descriptor list (list of desc_infos) -@@ -250,6 +334,7 @@ struct nandc_regs { - struct qcom_nand_controller { - struct nand_hw_control controller; - struct list_head host_list; -+ struct bam_transaction *bam_txn; - - struct device *dev; - -@@ -350,6 +435,45 @@ struct qcom_nand_driver_data { - bool dma_bam_enabled; - }; - -+/* Allocates and Initializes the BAM transaction */ -+struct bam_transaction *alloc_bam_transaction( -+ struct qcom_nand_controller *nandc) -+{ -+ struct bam_transaction *bam_txn; -+ -+ bam_txn = kzalloc(sizeof(*bam_txn), GFP_KERNEL); -+ -+ if (!bam_txn) -+ return NULL; -+ -+ bam_txn->bam_ce_index = 0; -+ bam_txn->pre_bam_ce_index = 0; -+ bam_txn->cmd_sgl_cnt = 0; -+ bam_txn->tx_sgl_cnt = 0; -+ bam_txn->rx_sgl_cnt = 0; -+ -+ qcom_bam_sg_init_table(bam_txn->cmd_sgl, BAM_CMD_SGL_SIZE); -+ qcom_bam_sg_init_table(bam_txn->tx_sgl, BAM_DATA_SGL_SIZE); -+ qcom_bam_sg_init_table(bam_txn->rx_sgl, BAM_DATA_SGL_SIZE); -+ -+ return bam_txn; -+} -+ -+/* Clears the BAM transaction index */ -+void clear_bam_transaction(struct qcom_nand_controller *nandc) -+{ -+ struct bam_transaction *bam_txn = nandc->bam_txn; -+ -+ if (!nandc->dma_bam_enabled) -+ return; -+ -+ bam_txn->bam_ce_index = 0; -+ bam_txn->pre_bam_ce_index = 0; -+ bam_txn->cmd_sgl_cnt = 0; -+ bam_txn->tx_sgl_cnt = 0; -+ bam_txn->rx_sgl_cnt = 0; -+} -+ - static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip) - { - return container_of(chip, struct qcom_nand_host, chip); -@@ -406,6 +530,16 @@ static __le32 *offset_to_nandc_reg(struc - return ®s->orig_vld; - case NAND_EBI2_ECC_BUF_CFG: - return ®s->ecc_buf_cfg; -+ case NAND_BUFFER_STATUS: -+ return ®s->clrreadstatus; -+ case NAND_READ_LOCATION_0: -+ return ®s->read_location0; -+ case NAND_READ_LOCATION_1: -+ return ®s->read_location1; -+ case NAND_READ_LOCATION_2: -+ return ®s->read_location2; -+ case NAND_READ_LOCATION_3: -+ return ®s->read_location3; - default: - return NULL; - } -@@ -447,7 +581,7 @@ static void update_rw_regs(struct qcom_n - { - struct nand_chip *chip = &host->chip; - struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); -- u32 cmd, cfg0, cfg1, ecc_bch_cfg; -+ u32 cmd, cfg0, cfg1, ecc_bch_cfg, read_location0; - - if (read) { - if (host->use_ecc) -@@ -464,12 +598,20 @@ static void update_rw_regs(struct qcom_n - - cfg1 = host->cfg1; - ecc_bch_cfg = host->ecc_bch_cfg; -+ if (read) -+ read_location0 = (0 << READ_LOCATION_OFFSET) | -+ (host->cw_data << READ_LOCATION_SIZE) | -+ (1 << READ_LOCATION_LAST); - } else { - cfg0 = (host->cfg0_raw & ~(7U << CW_PER_PAGE)) | - (num_cw - 1) << CW_PER_PAGE; - - cfg1 = host->cfg1_raw; - ecc_bch_cfg = 1 << ECC_CFG_ECC_DISABLE; -+ if (read) -+ read_location0 = (0 << READ_LOCATION_OFFSET) | -+ (host->cw_size << READ_LOCATION_SIZE) | -+ (1 << READ_LOCATION_LAST); - } - - nandc_set_reg(nandc, NAND_FLASH_CMD, cmd); -@@ -480,8 +622,104 @@ static void update_rw_regs(struct qcom_n - nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus); - nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus); - nandc_set_reg(nandc, NAND_EXEC_CMD, 1); -+ -+ if (read) -+ nandc_set_reg(nandc, NAND_READ_LOCATION_0, read_location0); -+} -+ -+/* -+ * Prepares the command descriptor for BAM DMA which will be used for NAND -+ * register read and write. The command descriptor requires the command -+ * to be formed in command element type so this function uses the command -+ * element from bam transaction ce array and fills the same with required -+ * data. A single SGL can contain multiple command elements so -+ * DMA_DESC_FLAG_BAM_NEXT_SGL will be used for starting the separate SGL -+ * after the current command element. -+ */ -+static int prep_dma_desc_command(struct qcom_nand_controller *nandc, bool read, -+ int reg_off, const void *vaddr, -+ int size, unsigned int flags) -+{ -+ int bam_ce_size; -+ int i; -+ struct bam_cmd_element *bam_ce_buffer; -+ struct bam_transaction *bam_txn = nandc->bam_txn; -+ -+ bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_index]; -+ -+ /* fill the command desc */ -+ for (i = 0; i < size; i++) { -+ if (read) { -+ qcom_prep_bam_ce(&bam_ce_buffer[i], -+ NAND_REG_PHYS_ADDRESS(nandc, reg_off + 4 * i), -+ BAM_READ_COMMAND, -+ REG_BUF_DMA_ADDR(nandc, -+ (unsigned int *)vaddr + i)); -+ } else { -+ qcom_prep_bam_ce(&bam_ce_buffer[i], -+ NAND_REG_PHYS_ADDRESS(nandc, reg_off + 4 * i), -+ BAM_WRITE_COMMAND, -+ *((unsigned int *)vaddr + i)); -+ } -+ } -+ -+ /* use the separate sgl after this command */ -+ if (flags & DMA_DESC_FLAG_BAM_NEXT_SGL) { -+ bam_ce_buffer = &bam_txn->bam_ce[bam_txn->pre_bam_ce_index]; -+ bam_txn->bam_ce_index += size; -+ bam_ce_size = (bam_txn->bam_ce_index - -+ bam_txn->pre_bam_ce_index) * -+ sizeof(struct bam_cmd_element); -+ sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_cnt].sgl, -+ bam_ce_buffer, -+ bam_ce_size); -+ if (flags & DMA_DESC_FLAG_BAM_NWD) -+ bam_txn->cmd_sgl[bam_txn->cmd_sgl_cnt].dma_flags = -+ DESC_FLAG_NWD | DESC_FLAG_CMD; -+ else -+ bam_txn->cmd_sgl[bam_txn->cmd_sgl_cnt].dma_flags = -+ DESC_FLAG_CMD; -+ -+ bam_txn->cmd_sgl_cnt++; -+ bam_txn->pre_bam_ce_index = bam_txn->bam_ce_index; -+ } else { -+ bam_txn->bam_ce_index += size; -+ } -+ -+ return 0; - } - -+/* -+ * Prepares the data descriptor for BAM DMA which will be used for NAND -+ * data read and write. -+ */ -+static int prep_dma_desc_data_bam(struct qcom_nand_controller *nandc, bool read, -+ int reg_off, const void *vaddr, -+ int size, unsigned int flags) -+{ -+ struct bam_transaction *bam_txn = nandc->bam_txn; -+ -+ if (read) { -+ sg_set_buf(&bam_txn->rx_sgl[bam_txn->rx_sgl_cnt].sgl, -+ vaddr, size); -+ bam_txn->rx_sgl[bam_txn->rx_sgl_cnt].dma_flags = 0; -+ bam_txn->rx_sgl_cnt++; -+ } else { -+ sg_set_buf(&bam_txn->tx_sgl[bam_txn->tx_sgl_cnt].sgl, -+ vaddr, size); -+ if (flags & DMA_DESC_FLAG_NO_EOT) -+ bam_txn->tx_sgl[bam_txn->tx_sgl_cnt].dma_flags = 0; -+ else -+ bam_txn->tx_sgl[bam_txn->tx_sgl_cnt].dma_flags = -+ DESC_FLAG_EOT; -+ -+ bam_txn->tx_sgl_cnt++; -+ } -+ -+ return 0; -+} -+ -+/* Prepares the dma desciptor for adm dma engine */ - static int prep_dma_desc(struct qcom_nand_controller *nandc, bool read, - int reg_off, const void *vaddr, int size, - bool flow_control) -@@ -560,7 +798,7 @@ err: - * @num_regs: number of registers to read - */ - static int read_reg_dma(struct qcom_nand_controller *nandc, int first, -- int num_regs) -+ int num_regs, unsigned int flags) - { - bool flow_control = false; - void *vaddr; -@@ -569,10 +807,18 @@ static int read_reg_dma(struct qcom_nand - if (first == NAND_READ_ID || first == NAND_FLASH_STATUS) - flow_control = true; - -- size = num_regs * sizeof(u32); - vaddr = nandc->reg_read_buf + nandc->reg_read_pos; - nandc->reg_read_pos += num_regs; - -+ if (nandc->dma_bam_enabled) { -+ size = num_regs; -+ -+ return prep_dma_desc_command(nandc, true, first, vaddr, size, -+ flags); -+ } -+ -+ size = num_regs * sizeof(u32); -+ - return prep_dma_desc(nandc, true, first, vaddr, size, flow_control); - } - -@@ -584,7 +830,7 @@ static int read_reg_dma(struct qcom_nand - * @num_regs: number of registers to write - */ - static int write_reg_dma(struct qcom_nand_controller *nandc, int first, -- int num_regs) -+ int num_regs, unsigned int flags) - { - bool flow_control = false; - struct nandc_regs *regs = nandc->regs; -@@ -596,12 +842,29 @@ static int write_reg_dma(struct qcom_nan - if (first == NAND_FLASH_CMD) - flow_control = true; - -+ if (first == NAND_ERASED_CW_DETECT_CFG) { -+ if (flags & DMA_DESC_ERASED_CW_SET) -+ vaddr = ®s->erased_cw_detect_cfg_set; -+ else -+ vaddr = ®s->erased_cw_detect_cfg_clr; -+ } -+ -+ if (first == NAND_EXEC_CMD) -+ flags |= DMA_DESC_FLAG_BAM_NWD; -+ - if (first == NAND_DEV_CMD1_RESTORE) - first = NAND_DEV_CMD1; - - if (first == NAND_DEV_CMD_VLD_RESTORE) - first = NAND_DEV_CMD_VLD; - -+ if (nandc->dma_bam_enabled) { -+ size = num_regs; -+ -+ return prep_dma_desc_command(nandc, false, first, vaddr, size, -+ flags); -+ } -+ - size = num_regs * sizeof(u32); - - return prep_dma_desc(nandc, false, first, vaddr, size, flow_control); -@@ -616,8 +879,12 @@ static int write_reg_dma(struct qcom_nan - * @size: DMA transaction size in bytes - */ - static int read_data_dma(struct qcom_nand_controller *nandc, int reg_off, -- const u8 *vaddr, int size) -+ const u8 *vaddr, int size, unsigned int flags) - { -+ if (nandc->dma_bam_enabled) -+ return prep_dma_desc_data_bam(nandc, true, reg_off, vaddr, size, -+ flags); -+ - return prep_dma_desc(nandc, true, reg_off, vaddr, size, false); - } - -@@ -630,8 +897,12 @@ static int read_data_dma(struct qcom_nan - * @size: DMA transaction size in bytes - */ - static int write_data_dma(struct qcom_nand_controller *nandc, int reg_off, -- const u8 *vaddr, int size) -+ const u8 *vaddr, int size, unsigned int flags) - { -+ if (nandc->dma_bam_enabled) -+ return prep_dma_desc_data_bam(nandc, false, reg_off, vaddr, -+ size, flags); -+ - return prep_dma_desc(nandc, false, reg_off, vaddr, size, false); - } - -@@ -641,14 +912,57 @@ static int write_data_dma(struct qcom_na - */ - static void config_cw_read(struct qcom_nand_controller *nandc) - { -- write_reg_dma(nandc, NAND_FLASH_CMD, 3); -- write_reg_dma(nandc, NAND_DEV0_CFG0, 3); -- write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1); - -- write_reg_dma(nandc, NAND_EXEC_CMD, 1); -+ write_reg_dma(nandc, NAND_FLASH_CMD, 3, 0); -+ write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0); -+ write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0); -+ -+ write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0); -+ write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, -+ DMA_DESC_ERASED_CW_SET); -+ if (nandc->dma_bam_enabled) -+ write_reg_dma(nandc, NAND_READ_LOCATION_0, 1, -+ DMA_DESC_FLAG_BAM_NEXT_SGL); - -- read_reg_dma(nandc, NAND_FLASH_STATUS, 2); -- read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1); -+ -+ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NWD | -+ DMA_DESC_FLAG_BAM_NEXT_SGL); -+ -+ read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0); -+ read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1, -+ DMA_DESC_FLAG_BAM_NEXT_SGL); -+} -+ -+/* -+ * Helpers to prepare DMA descriptors for configuring registers -+ * before reading a NAND page with BAM. -+ */ -+static void config_bam_page_read(struct qcom_nand_controller *nandc) -+{ -+ write_reg_dma(nandc, NAND_FLASH_CMD, 3, 0); -+ write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0); -+ write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0); -+ write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0); -+ write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, -+ DMA_DESC_ERASED_CW_SET | -+ DMA_DESC_FLAG_BAM_NEXT_SGL); -+} -+ -+/* -+ * Helpers to prepare DMA descriptors for configuring registers -+ * before reading each codeword in NAND page with BAM. -+ */ -+static void config_bam_cw_read(struct qcom_nand_controller *nandc) -+{ -+ if (nandc->dma_bam_enabled) -+ write_reg_dma(nandc, NAND_READ_LOCATION_0, 4, 0); -+ -+ write_reg_dma(nandc, NAND_FLASH_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); -+ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); -+ -+ read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0); -+ read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1, -+ DMA_DESC_FLAG_BAM_NEXT_SGL); - } - - /* -@@ -657,19 +971,20 @@ static void config_cw_read(struct qcom_n - */ - static void config_cw_write_pre(struct qcom_nand_controller *nandc) - { -- write_reg_dma(nandc, NAND_FLASH_CMD, 3); -- write_reg_dma(nandc, NAND_DEV0_CFG0, 3); -- write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1); -+ write_reg_dma(nandc, NAND_FLASH_CMD, 3, 0); -+ write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0); -+ write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, -+ DMA_DESC_FLAG_BAM_NEXT_SGL); - } - - static void config_cw_write_post(struct qcom_nand_controller *nandc) - { -- write_reg_dma(nandc, NAND_EXEC_CMD, 1); -+ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); - -- read_reg_dma(nandc, NAND_FLASH_STATUS, 1); -+ read_reg_dma(nandc, NAND_FLASH_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); - -- write_reg_dma(nandc, NAND_FLASH_STATUS, 1); -- write_reg_dma(nandc, NAND_READ_STATUS, 1); -+ write_reg_dma(nandc, NAND_FLASH_STATUS, 1, 0); -+ write_reg_dma(nandc, NAND_READ_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); - } - - /* -@@ -683,6 +998,8 @@ static int nandc_param(struct qcom_nand_ - struct nand_chip *chip = &host->chip; - struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); - -+ clear_bam_transaction(nandc); -+ - /* - * NAND_CMD_PARAM is called before we know much about the FLASH chip - * in use. we configure the controller to perform a raw read of 512 -@@ -715,9 +1032,13 @@ static int nandc_param(struct qcom_nand_ - - nandc_set_reg(nandc, NAND_DEV_CMD1_RESTORE, nandc->cmd1); - nandc_set_reg(nandc, NAND_DEV_CMD_VLD_RESTORE, nandc->vld); -+ nandc_set_reg(nandc, NAND_READ_LOCATION_0, -+ (0 << READ_LOCATION_OFFSET) | -+ (512 << READ_LOCATION_SIZE) | -+ (1 << READ_LOCATION_LAST)); - -- write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1); -- write_reg_dma(nandc, NAND_DEV_CMD1, 1); -+ write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0); -+ write_reg_dma(nandc, NAND_DEV_CMD1, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); - - nandc->buf_count = 512; - memset(nandc->data_buffer, 0xff, nandc->buf_count); -@@ -725,11 +1046,12 @@ static int nandc_param(struct qcom_nand_ - config_cw_read(nandc); - - read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, -- nandc->buf_count); -+ nandc->buf_count, 0); - - /* restore CMD1 and VLD regs */ -- write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1); -- write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1); -+ write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1, 0); -+ write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1, -+ DMA_DESC_FLAG_BAM_NEXT_SGL); - - return 0; - } -@@ -740,6 +1062,8 @@ static int erase_block(struct qcom_nand_ - struct nand_chip *chip = &host->chip; - struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); - -+ clear_bam_transaction(nandc); -+ - nandc_set_reg(nandc, NAND_FLASH_CMD, - BLOCK_ERASE | PAGE_ACC | LAST_PAGE); - nandc_set_reg(nandc, NAND_ADDR0, page_addr); -@@ -751,14 +1075,15 @@ static int erase_block(struct qcom_nand_ - nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus); - nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus); - -- write_reg_dma(nandc, NAND_FLASH_CMD, 3); -- write_reg_dma(nandc, NAND_DEV0_CFG0, 2); -- write_reg_dma(nandc, NAND_EXEC_CMD, 1); - -- read_reg_dma(nandc, NAND_FLASH_STATUS, 1); -+ write_reg_dma(nandc, NAND_FLASH_CMD, 3, DMA_DESC_FLAG_BAM_NEXT_SGL); -+ write_reg_dma(nandc, NAND_DEV0_CFG0, 2, DMA_DESC_FLAG_BAM_NEXT_SGL); -+ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); -+ -+ read_reg_dma(nandc, NAND_FLASH_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); - -- write_reg_dma(nandc, NAND_FLASH_STATUS, 1); -- write_reg_dma(nandc, NAND_READ_STATUS, 1); -+ write_reg_dma(nandc, NAND_FLASH_STATUS, 1, 0); -+ write_reg_dma(nandc, NAND_READ_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); - - return 0; - } -@@ -772,16 +1097,19 @@ static int read_id(struct qcom_nand_host - if (column == -1) - return 0; - -+ clear_bam_transaction(nandc); -+ - nandc_set_reg(nandc, NAND_FLASH_CMD, FETCH_ID); - nandc_set_reg(nandc, NAND_ADDR0, column); - nandc_set_reg(nandc, NAND_ADDR1, 0); -- nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, DM_EN); -+ nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, -+ nandc->dma_bam_enabled ? 0 : DM_EN); - nandc_set_reg(nandc, NAND_EXEC_CMD, 1); - -- write_reg_dma(nandc, NAND_FLASH_CMD, 4); -- write_reg_dma(nandc, NAND_EXEC_CMD, 1); -+ write_reg_dma(nandc, NAND_FLASH_CMD, 4, DMA_DESC_FLAG_BAM_NEXT_SGL); -+ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); - -- read_reg_dma(nandc, NAND_READ_ID, 1); -+ read_reg_dma(nandc, NAND_READ_ID, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); - - return 0; - } -@@ -792,28 +1120,108 @@ static int reset(struct qcom_nand_host * - struct nand_chip *chip = &host->chip; - struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); - -+ clear_bam_transaction(nandc); -+ - nandc_set_reg(nandc, NAND_FLASH_CMD, RESET_DEVICE); - nandc_set_reg(nandc, NAND_EXEC_CMD, 1); - -- write_reg_dma(nandc, NAND_FLASH_CMD, 1); -- write_reg_dma(nandc, NAND_EXEC_CMD, 1); -+ write_reg_dma(nandc, NAND_FLASH_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); -+ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); - -- read_reg_dma(nandc, NAND_FLASH_STATUS, 1); -+ read_reg_dma(nandc, NAND_FLASH_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL); - - return 0; - } - -+static int prepare_bam_async_desc(struct qcom_nand_controller *nandc, -+ struct dma_chan *chan, -+ struct qcom_bam_sgl *bam_sgl, -+ int sgl_cnt, -+ enum dma_transfer_direction direction) -+{ -+ struct desc_info *desc; -+ struct dma_async_tx_descriptor *dma_desc; -+ -+ if (!qcom_bam_map_sg(nandc->dev, bam_sgl, sgl_cnt, direction)) { -+ dev_err(nandc->dev, "failure in mapping sgl\n"); -+ return -ENOMEM; -+ } -+ -+ desc = kzalloc(sizeof(*desc), GFP_KERNEL); -+ if (!desc) { -+ qcom_bam_unmap_sg(nandc->dev, bam_sgl, sgl_cnt, direction); -+ return -ENOMEM; -+ } -+ -+ -+ desc->bam_desc_data.dir = direction; -+ desc->bam_desc_data.sgl_cnt = sgl_cnt; -+ desc->bam_desc_data.bam_sgl = bam_sgl; -+ -+ dma_desc = dmaengine_prep_dma_custom_mapping(chan, -+ &desc->bam_desc_data, -+ 0); -+ -+ if (!dma_desc) { -+ dev_err(nandc->dev, "failure in cmd prep desc\n"); -+ qcom_bam_unmap_sg(nandc->dev, bam_sgl, sgl_cnt, direction); -+ kfree(desc); -+ return -EINVAL; -+ } -+ -+ desc->dma_desc = dma_desc; -+ -+ list_add_tail(&desc->node, &nandc->desc_list); -+ -+ return 0; -+ -+} -+ - /* helpers to submit/free our list of dma descriptors */ - static int submit_descs(struct qcom_nand_controller *nandc) - { - struct desc_info *desc; - dma_cookie_t cookie = 0; -+ struct bam_transaction *bam_txn = nandc->bam_txn; -+ int r; -+ -+ if (nandc->dma_bam_enabled) { -+ if (bam_txn->rx_sgl_cnt) { -+ r = prepare_bam_async_desc(nandc, nandc->rx_chan, -+ bam_txn->rx_sgl, bam_txn->rx_sgl_cnt, -+ DMA_DEV_TO_MEM); -+ if (r) -+ return r; -+ } -+ -+ if (bam_txn->tx_sgl_cnt) { -+ r = prepare_bam_async_desc(nandc, nandc->tx_chan, -+ bam_txn->tx_sgl, bam_txn->tx_sgl_cnt, -+ DMA_MEM_TO_DEV); -+ if (r) -+ return r; -+ } -+ -+ r = prepare_bam_async_desc(nandc, nandc->cmd_chan, -+ bam_txn->cmd_sgl, bam_txn->cmd_sgl_cnt, -+ DMA_MEM_TO_DEV); -+ if (r) -+ return r; -+ } - - list_for_each_entry(desc, &nandc->desc_list, node) - cookie = dmaengine_submit(desc->dma_desc); - -- if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE) -- return -ETIMEDOUT; -+ if (nandc->dma_bam_enabled) { -+ dma_async_issue_pending(nandc->tx_chan); -+ dma_async_issue_pending(nandc->rx_chan); -+ -+ if (dma_sync_wait(nandc->cmd_chan, cookie) != DMA_COMPLETE) -+ return -ETIMEDOUT; -+ } else { -+ if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE) -+ return -ETIMEDOUT; -+ } - - return 0; - } -@@ -824,7 +1232,16 @@ static void free_descs(struct qcom_nand_ - - list_for_each_entry_safe(desc, n, &nandc->desc_list, node) { - list_del(&desc->node); -- dma_unmap_sg(nandc->dev, &desc->sgl, 1, desc->dir); -+ -+ if (nandc->dma_bam_enabled) -+ qcom_bam_unmap_sg(nandc->dev, -+ desc->bam_desc_data.bam_sgl, -+ desc->bam_desc_data.sgl_cnt, -+ desc->bam_desc_data.dir); -+ else -+ dma_unmap_sg(nandc->dev, &desc->sgl, 1, -+ desc->dir); -+ - kfree(desc); - } - } -@@ -1135,6 +1552,9 @@ static int read_page_ecc(struct qcom_nan - struct nand_ecc_ctrl *ecc = &chip->ecc; - int i, ret; - -+ if (nandc->dma_bam_enabled) -+ config_bam_page_read(nandc); -+ - /* queue cmd descs for each codeword */ - for (i = 0; i < ecc->steps; i++) { - int data_size, oob_size; -@@ -1148,11 +1568,36 @@ static int read_page_ecc(struct qcom_nan - oob_size = host->ecc_bytes_hw + host->spare_bytes; - } - -- config_cw_read(nandc); -+ if (nandc->dma_bam_enabled) { -+ if (data_buf && oob_buf) { -+ nandc_set_reg(nandc, NAND_READ_LOCATION_0, -+ (0 << READ_LOCATION_OFFSET) | -+ (data_size << READ_LOCATION_SIZE) | -+ (0 << READ_LOCATION_LAST)); -+ nandc_set_reg(nandc, NAND_READ_LOCATION_1, -+ (data_size << READ_LOCATION_OFFSET) | -+ (oob_size << READ_LOCATION_SIZE) | -+ (1 << READ_LOCATION_LAST)); -+ } else if (data_buf) { -+ nandc_set_reg(nandc, NAND_READ_LOCATION_0, -+ (0 << READ_LOCATION_OFFSET) | -+ (data_size << READ_LOCATION_SIZE) | -+ (1 << READ_LOCATION_LAST)); -+ } else { -+ nandc_set_reg(nandc, NAND_READ_LOCATION_0, -+ (data_size << READ_LOCATION_OFFSET) | -+ (oob_size << READ_LOCATION_SIZE) | -+ (1 << READ_LOCATION_LAST)); -+ } -+ -+ config_bam_cw_read(nandc); -+ } else { -+ config_cw_read(nandc); -+ } - - if (data_buf) - read_data_dma(nandc, FLASH_BUF_ACC, data_buf, -- data_size); -+ data_size, 0); - - /* - * when ecc is enabled, the controller doesn't read the real -@@ -1168,7 +1613,7 @@ static int read_page_ecc(struct qcom_nan - *oob_buf++ = 0xff; - - read_data_dma(nandc, FLASH_BUF_ACC + data_size, -- oob_buf, oob_size); -+ oob_buf, oob_size, 0); - } - - if (data_buf) -@@ -1207,10 +1652,14 @@ static int copy_last_cw(struct qcom_nand - - set_address(host, host->cw_size * (ecc->steps - 1), page); - update_rw_regs(host, 1, true); -+ nandc_set_reg(nandc, NAND_READ_LOCATION_0, -+ (0 << READ_LOCATION_OFFSET) | -+ (size << READ_LOCATION_SIZE) | -+ (1 << READ_LOCATION_LAST)); - - config_cw_read(nandc); - -- read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size); -+ read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0); - - ret = submit_descs(nandc); - if (ret) -@@ -1233,6 +1682,7 @@ static int qcom_nandc_read_page(struct m - data_buf = buf; - oob_buf = oob_required ? chip->oob_poi : NULL; - -+ clear_bam_transaction(nandc); - ret = read_page_ecc(host, data_buf, oob_buf); - if (ret) { - dev_err(nandc->dev, "failure to read page\n"); -@@ -1252,13 +1702,19 @@ static int qcom_nandc_read_page_raw(stru - u8 *data_buf, *oob_buf; - struct nand_ecc_ctrl *ecc = &chip->ecc; - int i, ret; -+ int read_location; - - data_buf = buf; - oob_buf = chip->oob_poi; - - host->use_ecc = false; -+ -+ clear_bam_transaction(nandc); - update_rw_regs(host, ecc->steps, true); - -+ if (nandc->dma_bam_enabled) -+ config_bam_page_read(nandc); -+ - for (i = 0; i < ecc->steps; i++) { - int data_size1, data_size2, oob_size1, oob_size2; - int reg_off = FLASH_BUF_ACC; -@@ -1276,21 +1732,49 @@ static int qcom_nandc_read_page_raw(stru - oob_size2 = host->ecc_bytes_hw + host->spare_bytes; - } - -- config_cw_read(nandc); -+ if (nandc->dma_bam_enabled) { -+ read_location = 0; -+ nandc_set_reg(nandc, NAND_READ_LOCATION_0, -+ (read_location << READ_LOCATION_OFFSET) | -+ (data_size1 << READ_LOCATION_SIZE) | -+ (0 << READ_LOCATION_LAST)); -+ read_location += data_size1; -+ -+ nandc_set_reg(nandc, NAND_READ_LOCATION_1, -+ (read_location << READ_LOCATION_OFFSET) | -+ (oob_size1 << READ_LOCATION_SIZE) | -+ (0 << READ_LOCATION_LAST)); -+ read_location += oob_size1; -+ -+ nandc_set_reg(nandc, NAND_READ_LOCATION_2, -+ (read_location << READ_LOCATION_OFFSET) | -+ (data_size2 << READ_LOCATION_SIZE) | -+ (0 << READ_LOCATION_LAST)); -+ read_location += data_size2; -+ -+ nandc_set_reg(nandc, NAND_READ_LOCATION_3, -+ (read_location << READ_LOCATION_OFFSET) | -+ (oob_size2 << READ_LOCATION_SIZE) | -+ (1 << READ_LOCATION_LAST)); -+ -+ config_bam_cw_read(nandc); -+ } else { -+ config_cw_read(nandc); -+ } - -- read_data_dma(nandc, reg_off, data_buf, data_size1); -+ read_data_dma(nandc, reg_off, data_buf, data_size1, 0); - reg_off += data_size1; - data_buf += data_size1; - -- read_data_dma(nandc, reg_off, oob_buf, oob_size1); -+ read_data_dma(nandc, reg_off, oob_buf, oob_size1, 0); - reg_off += oob_size1; - oob_buf += oob_size1; - -- read_data_dma(nandc, reg_off, data_buf, data_size2); -+ read_data_dma(nandc, reg_off, data_buf, data_size2, 0); - reg_off += data_size2; - data_buf += data_size2; - -- read_data_dma(nandc, reg_off, oob_buf, oob_size2); -+ read_data_dma(nandc, reg_off, oob_buf, oob_size2, 0); - oob_buf += oob_size2; - } - -@@ -1313,6 +1797,7 @@ static int qcom_nandc_read_oob(struct mt - int ret; - - clear_read_regs(nandc); -+ clear_bam_transaction(nandc); - - host->use_ecc = true; - set_address(host, 0, page); -@@ -1336,6 +1821,7 @@ static int qcom_nandc_write_page(struct - int i, ret; - - clear_read_regs(nandc); -+ clear_bam_transaction(nandc); - - data_buf = (u8 *)buf; - oob_buf = chip->oob_poi; -@@ -1357,7 +1843,8 @@ static int qcom_nandc_write_page(struct - - config_cw_write_pre(nandc); - -- write_data_dma(nandc, FLASH_BUF_ACC, data_buf, data_size); -+ write_data_dma(nandc, FLASH_BUF_ACC, data_buf, data_size, -+ i == (ecc->steps - 1) ? DMA_DESC_FLAG_NO_EOT : 0); - - /* - * when ECC is enabled, we don't really need to write anything -@@ -1370,7 +1857,7 @@ static int qcom_nandc_write_page(struct - oob_buf += host->bbm_size; - - write_data_dma(nandc, FLASH_BUF_ACC + data_size, -- oob_buf, oob_size); -+ oob_buf, oob_size, 0); - } - - config_cw_write_post(nandc); -@@ -1400,6 +1887,7 @@ static int qcom_nandc_write_page_raw(str - int i, ret; - - clear_read_regs(nandc); -+ clear_bam_transaction(nandc); - - data_buf = (u8 *)buf; - oob_buf = chip->oob_poi; -@@ -1426,19 +1914,22 @@ static int qcom_nandc_write_page_raw(str - - config_cw_write_pre(nandc); - -- write_data_dma(nandc, reg_off, data_buf, data_size1); -+ write_data_dma(nandc, reg_off, data_buf, data_size1, -+ DMA_DESC_FLAG_NO_EOT); - reg_off += data_size1; - data_buf += data_size1; - -- write_data_dma(nandc, reg_off, oob_buf, oob_size1); -+ write_data_dma(nandc, reg_off, oob_buf, oob_size1, -+ DMA_DESC_FLAG_NO_EOT); - reg_off += oob_size1; - oob_buf += oob_size1; - -- write_data_dma(nandc, reg_off, data_buf, data_size2); -+ write_data_dma(nandc, reg_off, data_buf, data_size2, -+ DMA_DESC_FLAG_NO_EOT); - reg_off += data_size2; - data_buf += data_size2; - -- write_data_dma(nandc, reg_off, oob_buf, oob_size2); -+ write_data_dma(nandc, reg_off, oob_buf, oob_size2, 0); - oob_buf += oob_size2; - - config_cw_write_post(nandc); -@@ -1474,6 +1965,7 @@ static int qcom_nandc_write_oob(struct m - - host->use_ecc = true; - -+ clear_bam_transaction(nandc); - ret = copy_last_cw(host, page); - if (ret) - return ret; -@@ -1493,7 +1985,7 @@ static int qcom_nandc_write_oob(struct m - - config_cw_write_pre(nandc); - write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, -- data_size + oob_size); -+ data_size + oob_size, 0); - config_cw_write_post(nandc); - - ret = submit_descs(nandc); -@@ -1531,6 +2023,7 @@ static int qcom_nandc_block_bad(struct m - */ - host->use_ecc = false; - -+ clear_bam_transaction(nandc); - ret = copy_last_cw(host, page); - if (ret) - goto err; -@@ -1561,6 +2054,7 @@ static int qcom_nandc_block_markbad(stru - int page, ret, status = 0; - - clear_read_regs(nandc); -+ clear_bam_transaction(nandc); - - /* - * to mark the BBM as bad, we flash the entire last codeword with 0s. -@@ -1577,7 +2071,8 @@ static int qcom_nandc_block_markbad(stru - update_rw_regs(host, 1, false); - - config_cw_write_pre(nandc); -- write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, host->cw_size); -+ write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, -+ host->cw_size, 0); - config_cw_write_post(nandc); - - ret = submit_descs(nandc); -@@ -1937,6 +2432,8 @@ static int qcom_nand_host_setup(struct q - - host->clrflashstatus = FS_READY_BSY_N; - host->clrreadstatus = 0xc0; -+ nandc->regs->erased_cw_detect_cfg_clr = CLR_ERASED_PAGE_DET; -+ nandc->regs->erased_cw_detect_cfg_set = SET_ERASED_PAGE_DET; - - dev_dbg(nandc->dev, - "cfg0 %x cfg1 %x ecc_buf_cfg %x ecc_bch cfg %x cw_size %d cw_data %d strength %d parity_bytes %d steps %d\n", -@@ -2015,6 +2512,12 @@ static int qcom_nandc_alloc(struct qcom_ - dev_err(nandc->dev, "failed to request cmd channel\n"); - return -ENODEV; - } -+ -+ nandc->bam_txn = alloc_bam_transaction(nandc); -+ if (!nandc->bam_txn) { -+ dev_err(nandc->dev, "failed to allocate bam transaction\n"); -+ return -ENOMEM; -+ } - } - - INIT_LIST_HEAD(&nandc->desc_list); -@@ -2050,6 +2553,9 @@ static void qcom_nandc_unalloc(struct qc - devm_kfree(nandc->dev, nandc->reg_read_buf); - } - -+ if (nandc->bam_txn) -+ devm_kfree(nandc->dev, nandc->bam_txn); -+ - if (nandc->regs) - devm_kfree(nandc->dev, nandc->regs); - -@@ -2060,12 +2566,19 @@ static void qcom_nandc_unalloc(struct qc - /* one time setup of a few nand controller registers */ - static int qcom_nandc_setup(struct qcom_nand_controller *nandc) - { -+ u32 nand_ctrl; -+ - /* kill onenand */ - nandc_write(nandc, SFLASHC_BURST_CFG, 0); - nandc_write(nandc, NAND_DEV_CMD_VLD, NAND_DEV_CMD_VLD_VAL); - -- /* enable ADM DMA */ -- nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN); -+ /* enable ADM or BAM DMA */ -+ if (!nandc->dma_bam_enabled) { -+ nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN); -+ } else { -+ nand_ctrl = nandc_read(nandc, NAND_CTRL); -+ nandc_write(nandc, NAND_CTRL, nand_ctrl | BAM_MODE_EN); -+ } - - /* save the original values of these registers */ - nandc->cmd1 = nandc_read(nandc, NAND_DEV_CMD1); ---- /dev/null -+++ b/include/linux/dma/qcom_bam_dma.h -@@ -0,0 +1,149 @@ -+/* -+ * Copyright (c) 2017, The Linux Foundation. All rights reserved. -+ * -+ * Permission to use, copy, modify, and/or distribute this software for any -+ * purpose with or without fee is hereby granted, provided that the above -+ * copyright notice and this permission notice appear in all copies. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ */ -+ -+#ifndef _QCOM_BAM_DMA_H -+#define _QCOM_BAM_DMA_H -+ -+#include -+ -+#define DESC_FLAG_INT BIT(15) -+#define DESC_FLAG_EOT BIT(14) -+#define DESC_FLAG_EOB BIT(13) -+#define DESC_FLAG_NWD BIT(12) -+#define DESC_FLAG_CMD BIT(11) -+ -+/* -+ * QCOM BAM DMA SGL struct -+ * -+ * @sgl: DMA SGL -+ * @dma_flags: BAM DMA flags -+ */ -+struct qcom_bam_sgl { -+ struct scatterlist sgl; -+ unsigned int dma_flags; -+}; -+ -+/* -+ * This data type corresponds to the native Command Element -+ * supported by BAM DMA Engine. -+ * -+ * @addr - register address. -+ * @command - command type. -+ * @data - for write command: content to be written into peripheral register. -+ * for read command: dest addr to write peripheral register value to. -+ * @mask - register mask. -+ * @reserved - for future usage. -+ * -+ */ -+struct bam_cmd_element { -+ __le32 addr:24; -+ __le32 command:8; -+ __le32 data; -+ __le32 mask; -+ __le32 reserved; -+}; -+ -+/* -+ * This enum indicates the command type in a command element -+ */ -+enum bam_command_type { -+ BAM_WRITE_COMMAND = 0, -+ BAM_READ_COMMAND, -+}; -+ -+/* -+ * qcom_bam_sg_init_table - Init QCOM BAM SGL -+ * @bam_sgl: bam sgl -+ * @nents: number of entries in bam sgl -+ * -+ * This function performs the initialization for each SGL in BAM SGL -+ * with generic SGL API. -+ */ -+static inline void qcom_bam_sg_init_table(struct qcom_bam_sgl *bam_sgl, -+ unsigned int nents) -+{ -+ int i; -+ -+ for (i = 0; i < nents; i++) -+ sg_init_table(&bam_sgl[i].sgl, 1); -+} -+ -+/* -+ * qcom_bam_unmap_sg - Unmap QCOM BAM SGL -+ * @dev: device for which unmapping needs to be done -+ * @bam_sgl: bam sgl -+ * @nents: number of entries in bam sgl -+ * @dir: dma transfer direction -+ * -+ * This function performs the DMA unmapping for each SGL in BAM SGL -+ * with generic SGL API. -+ */ -+static inline void qcom_bam_unmap_sg(struct device *dev, -+ struct qcom_bam_sgl *bam_sgl, int nents, enum dma_data_direction dir) -+{ -+ int i; -+ -+ for (i = 0; i < nents; i++) -+ dma_unmap_sg(dev, &bam_sgl[i].sgl, 1, dir); -+} -+ -+/* -+ * qcom_bam_map_sg - Map QCOM BAM SGL -+ * @dev: device for which mapping needs to be done -+ * @bam_sgl: bam sgl -+ * @nents: number of entries in bam sgl -+ * @dir: dma transfer direction -+ * -+ * This function performs the DMA mapping for each SGL in BAM SGL -+ * with generic SGL API. -+ * -+ * returns 0 on error and > 0 on success -+ */ -+static inline int qcom_bam_map_sg(struct device *dev, -+ struct qcom_bam_sgl *bam_sgl, int nents, enum dma_data_direction dir) -+{ -+ int i, ret = 0; -+ -+ for (i = 0; i < nents; i++) { -+ ret = dma_map_sg(dev, &bam_sgl[i].sgl, 1, dir); -+ if (!ret) -+ break; -+ } -+ -+ /* unmap the mapped sgl from previous loop in case of error */ -+ if (!ret) -+ qcom_bam_unmap_sg(dev, bam_sgl, i, dir); -+ -+ return ret; -+} -+ -+/* -+ * qcom_prep_bam_ce - Wrapper function to prepare a single BAM command element -+ * with the data that is passed to this function. -+ * @bam_ce: bam command element -+ * @addr: target address -+ * @command: command in bam_command_type -+ * @data: actual data for write and dest addr for read -+ */ -+static inline void qcom_prep_bam_ce(struct bam_cmd_element *bam_ce, -+ uint32_t addr, uint32_t command, uint32_t data) -+{ -+ bam_ce->addr = cpu_to_le32(addr); -+ bam_ce->command = cpu_to_le32(command); -+ bam_ce->data = cpu_to_le32(data); -+ bam_ce->mask = 0xFFFFFFFF; -+} -+#endif diff --git a/target/linux/ipq806x/patches-4.9/862-dmaengine-qcom-bam_dma-Add-custom-data-mapping.patch b/target/linux/ipq806x/patches-4.9/862-dmaengine-qcom-bam_dma-Add-custom-data-mapping.patch deleted file mode 100644 index 796938f2d0cb..000000000000 --- a/target/linux/ipq806x/patches-4.9/862-dmaengine-qcom-bam_dma-Add-custom-data-mapping.patch +++ /dev/null @@ -1,209 +0,0 @@ -From 5a7ccdf845d64b385affdcffaf2defbe9848be15 Mon Sep 17 00:00:00 2001 -From: Ram Chandra Jangir -Date: Thu, 20 Apr 2017 10:39:00 +0530 -Subject: [PATCH] dmaengine: qcom: bam_dma: Add custom data mapping - -Add a new function to support for preparing DMA descriptor -for custom data. - -Signed-off-by: Abhishek Sahu -Signed-off-by: Ram Chandra Jangir ---- - drivers/dma/qcom/bam_dma.c | 97 +++++++++++++++++++++++++++++++++++++--- - include/linux/dma/qcom_bam_dma.h | 14 ++++++ - include/linux/dmaengine.h | 14 ++++++ - 3 files changed, 119 insertions(+), 6 deletions(-) - ---- a/drivers/dma/qcom/bam_dma.c -+++ b/drivers/dma/qcom/bam_dma.c -@@ -49,6 +49,7 @@ - #include - #include - #include -+#include - - #include "../dmaengine.h" - #include "../virt-dma.h" -@@ -61,11 +62,6 @@ struct bam_desc_hw { - - #define BAM_DMA_AUTOSUSPEND_DELAY 100 - --#define DESC_FLAG_INT BIT(15) --#define DESC_FLAG_EOT BIT(14) --#define DESC_FLAG_EOB BIT(13) --#define DESC_FLAG_NWD BIT(12) -- - struct bam_async_desc { - struct virt_dma_desc vd; - -@@ -670,6 +666,93 @@ err_out: - } - - /** -+ * bam_prep_dma_custom_mapping - Prep DMA descriptor from custom data -+ * -+ * @chan: dma channel -+ * @data: custom data -+ * @flags: DMA flags -+ */ -+static struct dma_async_tx_descriptor *bam_prep_dma_custom_mapping( -+ struct dma_chan *chan, -+ void *data, unsigned long flags) -+{ -+ struct bam_chan *bchan = to_bam_chan(chan); -+ struct bam_device *bdev = bchan->bdev; -+ struct bam_async_desc *async_desc; -+ struct qcom_bam_custom_data *desc_data = data; -+ u32 i; -+ struct bam_desc_hw *desc; -+ unsigned int num_alloc = 0; -+ -+ -+ if (!is_slave_direction(desc_data->dir)) { -+ dev_err(bdev->dev, "invalid dma direction\n"); -+ return NULL; -+ } -+ -+ /* calculate number of required entries */ -+ for (i = 0; i < desc_data->sgl_cnt; i++) -+ num_alloc += DIV_ROUND_UP( -+ sg_dma_len(&desc_data->bam_sgl[i].sgl), BAM_FIFO_SIZE); -+ -+ /* allocate enough room to accommodate the number of entries */ -+ async_desc = kzalloc(sizeof(*async_desc) + -+ (num_alloc * sizeof(struct bam_desc_hw)), GFP_NOWAIT); -+ -+ if (!async_desc) -+ goto err_out; -+ -+ if (flags & DMA_PREP_FENCE) -+ async_desc->flags |= DESC_FLAG_NWD; -+ -+ if (flags & DMA_PREP_INTERRUPT) -+ async_desc->flags |= DESC_FLAG_EOT; -+ else -+ async_desc->flags |= DESC_FLAG_INT; -+ -+ async_desc->num_desc = num_alloc; -+ async_desc->curr_desc = async_desc->desc; -+ async_desc->dir = desc_data->dir; -+ -+ /* fill in temporary descriptors */ -+ desc = async_desc->desc; -+ for (i = 0; i < desc_data->sgl_cnt; i++) { -+ unsigned int remainder; -+ unsigned int curr_offset = 0; -+ -+ remainder = sg_dma_len(&desc_data->bam_sgl[i].sgl); -+ -+ do { -+ desc->addr = cpu_to_le32( -+ sg_dma_address(&desc_data->bam_sgl[i].sgl) + -+ curr_offset); -+ -+ if (desc_data->bam_sgl[i].dma_flags) -+ desc->flags |= cpu_to_le16( -+ desc_data->bam_sgl[i].dma_flags); -+ -+ if (remainder > BAM_FIFO_SIZE) { -+ desc->size = cpu_to_le16(BAM_FIFO_SIZE); -+ remainder -= BAM_FIFO_SIZE; -+ curr_offset += BAM_FIFO_SIZE; -+ } else { -+ desc->size = cpu_to_le16(remainder); -+ remainder = 0; -+ } -+ -+ async_desc->length += desc->size; -+ desc++; -+ } while (remainder > 0); -+ } -+ -+ return vchan_tx_prep(&bchan->vc, &async_desc->vd, flags); -+ -+err_out: -+ kfree(async_desc); -+ return NULL; -+} -+ -+/** - * bam_dma_terminate_all - terminate all transactions on a channel - * @bchan: bam dma channel - * -@@ -960,7 +1043,7 @@ static void bam_start_dma(struct bam_cha - - /* set any special flags on the last descriptor */ - if (async_desc->num_desc == async_desc->xfer_len) -- desc[async_desc->xfer_len - 1].flags = -+ desc[async_desc->xfer_len - 1].flags |= - cpu_to_le16(async_desc->flags); - else - desc[async_desc->xfer_len - 1].flags |= -@@ -1237,6 +1320,8 @@ static int bam_dma_probe(struct platform - bdev->common.device_alloc_chan_resources = bam_alloc_chan; - bdev->common.device_free_chan_resources = bam_free_chan; - bdev->common.device_prep_slave_sg = bam_prep_slave_sg; -+ bdev->common.device_prep_dma_custom_mapping = -+ bam_prep_dma_custom_mapping; - bdev->common.device_config = bam_slave_config; - bdev->common.device_pause = bam_pause; - bdev->common.device_resume = bam_resume; ---- a/include/linux/dma/qcom_bam_dma.h -+++ b/include/linux/dma/qcom_bam_dma.h -@@ -65,6 +65,19 @@ enum bam_command_type { - }; - - /* -+ * QCOM BAM DMA custom data -+ * -+ * @sgl_cnt: number of sgl in bam_sgl -+ * @dir: DMA data transfer direction -+ * @bam_sgl: BAM SGL pointer -+ */ -+struct qcom_bam_custom_data { -+ u32 sgl_cnt; -+ enum dma_transfer_direction dir; -+ struct qcom_bam_sgl *bam_sgl; -+}; -+ -+/* - * qcom_bam_sg_init_table - Init QCOM BAM SGL - * @bam_sgl: bam sgl - * @nents: number of entries in bam sgl ---- a/include/linux/dmaengine.h -+++ b/include/linux/dmaengine.h -@@ -692,6 +692,8 @@ struct dma_filter { - * be called after period_len bytes have been transferred. - * @device_prep_interleaved_dma: Transfer expression in a generic way. - * @device_prep_dma_imm_data: DMA's 8 byte immediate data to the dst address -+ * @device_prep_dma_custom_mapping: prepares a dma operation from dma driver -+ * specific custom data - * @device_config: Pushes a new configuration to a channel, return 0 or an error - * code - * @device_pause: Pauses any transfer happening on a channel. Returns -@@ -783,6 +785,9 @@ struct dma_device { - struct dma_async_tx_descriptor *(*device_prep_dma_imm_data)( - struct dma_chan *chan, dma_addr_t dst, u64 data, - unsigned long flags); -+ struct dma_async_tx_descriptor *(*device_prep_dma_custom_mapping)( -+ struct dma_chan *chan, void *data, -+ unsigned long flags); - - int (*device_config)(struct dma_chan *chan, - struct dma_slave_config *config); -@@ -899,6 +904,15 @@ static inline struct dma_async_tx_descri - src_sg, src_nents, flags); - } - -+static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_custom_mapping( -+ struct dma_chan *chan, -+ void *data, -+ unsigned long flags) -+{ -+ return chan->device->device_prep_dma_custom_mapping(chan, data, -+ flags); -+} -+ - /** - * dmaengine_terminate_all() - Terminate all active DMA transfers - * @chan: The channel for which to terminate the transfers diff --git a/target/linux/ipq806x/patches-4.9/863-dts-ipq4019-add-nand-and-qpic-bam-dma-node.patch b/target/linux/ipq806x/patches-4.9/863-dts-ipq4019-add-nand-and-qpic-bam-dma-node.patch deleted file mode 100644 index f054927e0305..000000000000 --- a/target/linux/ipq806x/patches-4.9/863-dts-ipq4019-add-nand-and-qpic-bam-dma-node.patch +++ /dev/null @@ -1,166 +0,0 @@ -From 02bbf3c46e1e38e9ca699143566903683e3a015d Mon Sep 17 00:00:00 2001 -From: Ram Chandra Jangir -Date: Thu, 20 Apr 2017 10:45:00 +0530 -Subject: [PATCH] dts: ipq4019: add nand and qpic bam dma node - -This change adds QPIC BAM dma and NAND driver node's in -IPQ4019 device tree, also enable this for AP-DK04.1 based -boards. - -Signed-off-by: Ram Chandra Jangir ---- - arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 75 +++++++++++++++++++++++++++ - arch/arm/boot/dts/qcom-ipq4019.dtsi | 38 ++++++++++++++ - 2 files changed, 113 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi -@@ -88,6 +88,86 @@ - bias-disable; - }; - }; -+ -+ nand_pins: nand_pins { -+ -+ mux_1 { -+ pins = "gpio52", "gpio53", "gpio54", -+ "gpio55", "gpio56", "gpio61", -+ "gpio62", "gpio63", "gpio69"; -+ function = "qpic_pad"; -+ bias-disable; -+ }; -+ -+ mux_2 { -+ pins = "gpio67"; -+ function = "qpic_pad0"; -+ bias-disable; -+ }; -+ -+ mux_3 { -+ pins = "gpio64"; -+ function = "qpic_pad1"; -+ bias-disable; -+ }; -+ -+ mux_4 { -+ pins = "gpio65"; -+ function = "qpic_pad2"; -+ bias-disable; -+ }; -+ -+ mux_5 { -+ pins = "gpio66"; -+ function = "qpic_pad3"; -+ bias-disable; -+ }; -+ -+ mux_6 { -+ pins = "gpio57"; -+ function = "qpic_pad4"; -+ bias-disable; -+ }; -+ -+ mux_7 { -+ pins = "gpio58"; -+ function = "qpic_pad5"; -+ bias-disable; -+ }; -+ -+ mux_8 { -+ pins = "gpio59"; -+ function = "qpic_pad6"; -+ bias-disable; -+ }; -+ -+ mux_9 { -+ pins = "gpio60"; -+ function = "qpic_pad7"; -+ bias-disable; -+ }; -+ -+ mux_10 { -+ pins = "gpio68"; -+ function = "qpic_pad8"; -+ bias-disable; -+ }; -+ -+ pullups { -+ pins = "gpio52", "gpio53", "gpio58", -+ "gpio59"; -+ bias-pull-up; -+ }; -+ -+ pulldowns { -+ pins = "gpio54", "gpio55", "gpio56", -+ "gpio57", "gpio60", "gpio61", -+ "gpio62", "gpio63", "gpio64", -+ "gpio65", "gpio66", "gpio67", -+ "gpio68", "gpio69"; -+ bias-pull-down; -+ }; -+ }; - }; - - blsp_dma: dma@7884000 { -@@ -159,5 +239,15 @@ - watchdog@b017000 { - status = "ok"; - }; -+ -+ qpic_bam: dma@7984000 { -+ status = "ok"; -+ }; -+ -+ nand: qpic-nand@79b0000 { -+ pinctrl-0 = <&nand_pins>; -+ pinctrl-names = "default"; -+ status = "ok"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -580,5 +580,43 @@ - "legacy"; - status = "disabled"; - }; -+ -+ qpic_bam: dma@7984000 { -+ compatible = "qcom,bam-v1.7.0"; -+ reg = <0x7984000 0x1a000>; -+ interrupts = <0 101 0>; -+ clocks = <&gcc GCC_QPIC_AHB_CLK>; -+ clock-names = "bam_clk"; -+ #dma-cells = <1>; -+ qcom,ee = <0>; -+ status = "disabled"; -+ }; -+ -+ nand: qpic-nand@79b0000 { -+ compatible = "qcom,ebi2-nandc-bam", "qcom,msm-nand"; -+ reg = <0x79b0000 0x1000>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ clocks = <&gcc GCC_QPIC_CLK>, -+ <&gcc GCC_QPIC_AHB_CLK>; -+ clock-names = "core", "aon"; -+ -+ dmas = <&qpic_bam 0>, -+ <&qpic_bam 1>, -+ <&qpic_bam 2>; -+ dma-names = "tx", "rx", "cmd"; -+ status = "disabled"; -+ -+ nandcs@0 { -+ compatible = "qcom,nandcs"; -+ reg = <0>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ nand-bus-width = <8>; -+ }; -+ }; - }; - }; diff --git a/target/linux/ipq806x/patches-4.9/864-00-v3-1-2-dts-ipq4019-Fix-pinctrl-node-name.patch b/target/linux/ipq806x/patches-4.9/864-00-v3-1-2-dts-ipq4019-Fix-pinctrl-node-name.patch deleted file mode 100644 index dbd5537f8805..000000000000 --- a/target/linux/ipq806x/patches-4.9/864-00-v3-1-2-dts-ipq4019-Fix-pinctrl-node-name.patch +++ /dev/null @@ -1,44 +0,0 @@ -From patchwork Mon Jul 3 07:47:12 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v3,1/2] dts: ipq4019: Fix pinctrl node name -From: Varadarajan Narayanan -X-Patchwork-Id: 9822099 -Message-Id: <1499068033-24000-2-git-send-email-varada@codeaurora.org> -To: andy.gross@linaro.org, david.brown@linaro.org, robh+dt@kernel.org, - mark.rutland@arm.com, linux@armlinux.org.uk, - linux-arm-msm@vger.kernel.org, - linux-soc@vger.kernel.org, devicetree@vger.kernel.org, - linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org -Cc: Varadarajan Narayanan -Date: Mon, 3 Jul 2017 13:17:12 +0530 - -Signed-off-by: Varadarajan Narayanan ---- - arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 2 +- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -40,7 +40,7 @@ - clock-frequency = <48000000>; - }; - -- pinctrl@0x01000000 { -+ pinctrl@1000000 { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -149,7 +149,7 @@ - reg = <0x1800000 0x60000>; - }; - -- tlmm: pinctrl@0x01000000 { -+ tlmm: pinctrl@1000000 { - compatible = "qcom,ipq4019-pinctrl"; - reg = <0x01000000 0x300000>; - gpio-controller; diff --git a/target/linux/ipq806x/patches-4.9/864-00-v3-2-2-dts-ipq4019-Move-xo-and-timer-nodes-to-SoC-dtsi.patch b/target/linux/ipq806x/patches-4.9/864-00-v3-2-2-dts-ipq4019-Move-xo-and-timer-nodes-to-SoC-dtsi.patch deleted file mode 100644 index 3e2c3961117a..000000000000 --- a/target/linux/ipq806x/patches-4.9/864-00-v3-2-2-dts-ipq4019-Move-xo-and-timer-nodes-to-SoC-dtsi.patch +++ /dev/null @@ -1,78 +0,0 @@ -From patchwork Mon Jul 3 07:47:13 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v3,2/2] dts: ipq4019: Move xo and timer nodes to SoC dtsi -From: Varadarajan Narayanan -X-Patchwork-Id: 9822107 -Message-Id: <1499068033-24000-3-git-send-email-varada@codeaurora.org> -To: andy.gross@linaro.org, david.brown@linaro.org, robh+dt@kernel.org, - mark.rutland@arm.com, linux@armlinux.org.uk, - linux-arm-msm@vger.kernel.org, - linux-soc@vger.kernel.org, devicetree@vger.kernel.org, - linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org -Cc: Varadarajan Narayanan -Date: Mon, 3 Jul 2017 13:17:13 +0530 - -The node for xo and timer belong to the SoC DTS file. -Else, new board DT files may not inherit these nodes. - -Signed-off-by: Varadarajan Narayanan ---- - arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 19 ------------------- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 15 +++++++++++++++ - 2 files changed, 15 insertions(+), 19 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -20,26 +20,7 @@ - model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; - compatible = "qcom,ipq4019"; - -- clocks { -- xo: xo { -- compatible = "fixed-clock"; -- clock-frequency = <48000000>; -- #clock-cells = <0>; -- }; -- }; -- - soc { -- -- -- timer { -- compatible = "arm,armv7-timer"; -- interrupts = <1 2 0xf08>, -- <1 3 0xf08>, -- <1 4 0xf08>, -- <1 1 0xf08>; -- clock-frequency = <48000000>; -- }; -- - pinctrl@1000000 { - serial_pins: serial_pinmux { - mux { ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -126,6 +126,21 @@ - clock-frequency = <32768>; - #clock-cells = <0>; - }; -+ -+ xo: xo { -+ compatible = "fixed-clock"; -+ clock-frequency = <48000000>; -+ #clock-cells = <0>; -+ }; -+ }; -+ -+ timer { -+ compatible = "arm,armv7-timer"; -+ interrupts = <1 2 0xf08>, -+ <1 3 0xf08>, -+ <1 4 0xf08>, -+ <1 1 0xf08>; -+ clock-frequency = <48000000>; - }; - - soc { diff --git a/target/linux/ipq806x/patches-4.9/864-01-dts-ipq4019-ap-dk04-fix-pinctrl-node-name.patch b/target/linux/ipq806x/patches-4.9/864-01-dts-ipq4019-ap-dk04-fix-pinctrl-node-name.patch deleted file mode 100644 index f2de6d618a2f..000000000000 --- a/target/linux/ipq806x/patches-4.9/864-01-dts-ipq4019-ap-dk04-fix-pinctrl-node-name.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi -@@ -38,7 +38,7 @@ - clock-frequency = <48000000>; - }; - -- pinctrl@0x01000000 { -+ pinctrl@1000000 { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; diff --git a/target/linux/ipq806x/patches-4.9/864-02-dts-ipq4019-ap-dk04-remove-xo-and-timer-nodes.patch b/target/linux/ipq806x/patches-4.9/864-02-dts-ipq4019-ap-dk04-remove-xo-and-timer-nodes.patch deleted file mode 100644 index dcbdb8d777da..000000000000 --- a/target/linux/ipq806x/patches-4.9/864-02-dts-ipq4019-ap-dk04-remove-xo-and-timer-nodes.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi -@@ -20,24 +20,7 @@ - model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1"; - compatible = "qcom,ipq4019"; - -- clocks { -- xo: xo { -- compatible = "fixed-clock"; -- clock-frequency = <48000000>; -- #clock-cells = <0>; -- }; -- }; -- - soc { -- timer { -- compatible = "arm,armv7-timer"; -- interrupts = <1 2 0xf08>, -- <1 3 0xf08>, -- <1 4 0xf08>, -- <1 1 0xf08>; -- clock-frequency = <48000000>; -- }; -- - pinctrl@1000000 { - serial_0_pins: serial_pinmux { - mux { diff --git a/target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap-dk01-add-tcsr-config-to-dtsi.patch b/target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap-dk01-add-tcsr-config-to-dtsi.patch deleted file mode 100644 index 9d11dc022e6c..000000000000 --- a/target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap-dk01-add-tcsr-config-to-dtsi.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -15,12 +15,39 @@ - */ - - #include "qcom-ipq4019.dtsi" -+#include - - / { - model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; - compatible = "qcom,ipq4019"; - - soc { -+ tcsr@194b000 { -+ /* select hostmode */ -+ compatible = "qcom,tcsr"; -+ reg = <0x194b000 0x100>; -+ qcom,usb-hsphy-mode-select = ; -+ status = "ok"; -+ }; -+ -+ ess_tcsr@1953000 { -+ compatible = "qcom,tcsr"; -+ reg = <0x1953000 0x1000>; -+ qcom,ess-interface-select = ; -+ }; -+ -+ tcsr@1949000 { -+ compatible = "qcom,tcsr"; -+ reg = <0x1949000 0x100>; -+ qcom,wifi_glb_cfg = ; -+ }; -+ -+ tcsr@1957000 { -+ compatible = "qcom,tcsr"; -+ reg = <0x1957000 0x100>; -+ qcom,wifi_noc_memtype_m0_m2 = ; -+ }; -+ - pinctrl@1000000 { - serial_pins: serial_pinmux { - mux { diff --git a/target/linux/ipq806x/patches-4.9/864-04-dts-ipq4019-ap-dk01-add-network-nodes-to-dtsi.patch b/target/linux/ipq806x/patches-4.9/864-04-dts-ipq4019-ap-dk01-add-network-nodes-to-dtsi.patch deleted file mode 100644 index 02a102e37fc3..000000000000 --- a/target/linux/ipq806x/patches-4.9/864-04-dts-ipq4019-ap-dk01-add-network-nodes-to-dtsi.patch +++ /dev/null @@ -1,32 +0,0 @@ ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -136,5 +136,29 @@ - usb2: usb2@60f8800 { - status = "ok"; - }; -+ -+ mdio@90000 { -+ status = "okay"; -+ }; -+ -+ ess-switch@c000000 { -+ status = "okay"; -+ }; -+ -+ ess-psgmii@98000 { -+ status = "okay"; -+ }; -+ -+ edma@c080000 { -+ status = "okay"; -+ }; -+ -+ wifi@a000000 { -+ status = "okay"; -+ }; -+ -+ wifi@a800000 { -+ status = "okay"; -+ }; - }; - }; diff --git a/target/linux/ipq806x/patches-4.9/864-05-dts-ipq4019-ap-dk01-remove-spi-chip-node-from-dtsi.patch b/target/linux/ipq806x/patches-4.9/864-05-dts-ipq4019-ap-dk01-remove-spi-chip-node-from-dtsi.patch deleted file mode 100644 index 0d4b80b30275..000000000000 --- a/target/linux/ipq806x/patches-4.9/864-05-dts-ipq4019-ap-dk01-remove-spi-chip-node-from-dtsi.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -89,14 +89,6 @@ - pinctrl-names = "default"; - status = "ok"; - cs-gpios = <&tlmm 54 0>; -- -- mx25l25635e@0 { -- #address-cells = <1>; -- #size-cells = <1>; -- reg = <0>; -- compatible = "mx25l25635e"; -- spi-max-frequency = <24000000>; -- }; - }; - - serial@78af000 { diff --git a/target/linux/ipq806x/patches-4.9/864-06-dts-ipq4019-fix-max-cpu-speed.patch b/target/linux/ipq806x/patches-4.9/864-06-dts-ipq4019-fix-max-cpu-speed.patch deleted file mode 100644 index 33f7f04f3ceb..000000000000 --- a/target/linux/ipq806x/patches-4.9/864-06-dts-ipq4019-fix-max-cpu-speed.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -108,8 +108,8 @@ - opp-hz = /bits/ 64 <500000000>; - clock-latency-ns = <256000>; - }; -- opp@666000000 { -- opp-hz = /bits/ 64 <666000000>; -+ opp@716800000 { -+ opp-hz = /bits/ 64 <716800000>; - clock-latency-ns = <256000>; - }; - }; diff --git a/target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch b/target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch deleted file mode 100644 index e9d262069f7e..000000000000 --- a/target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch +++ /dev/null @@ -1,115 +0,0 @@ ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -@@ -19,4 +19,112 @@ - / { - model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; - -+ memory { -+ device_type = "memory"; -+ reg = <0x80000000 0x10000000>; -+ }; -+ -+ reserved-memory { -+ #address-cells = <0x1>; -+ #size-cells = <0x1>; -+ ranges; -+ -+ apps_bl@87000000 { -+ reg = <0x87000000 0x400000>; -+ no-map; -+ }; -+ -+ sbl@87400000 { -+ reg = <0x87400000 0x100000>; -+ no-map; -+ }; -+ -+ cnss_debug@87500000 { -+ reg = <0x87500000 0x600000>; -+ no-map; -+ }; -+ -+ cpu_context_dump@87b00000 { -+ reg = <0x87b00000 0x080000>; -+ no-map; -+ }; -+ -+ tz_apps@87b80000 { -+ reg = <0x87b80000 0x280000>; -+ no-map; -+ }; -+ -+ smem@87e00000 { -+ reg = <0x87e00000 0x080000>; -+ no-map; -+ }; -+ -+ tz@87e80000 { -+ reg = <0x87e80000 0x180000>; -+ no-map; -+ }; -+ }; -+}; -+ -+&spi_0 { -+ mx25l25635f@0 { -+ compatible = "mx25l25635f", "jedec,spi-nor"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ reg = <0>; -+ spi-max-frequency = <24000000>; -+ -+ SBL1@0 { -+ label = "SBL1"; -+ reg = <0x0 0x40000>; -+ read-only; -+ }; -+ MIBIB@40000 { -+ label = "MIBIB"; -+ reg = <0x40000 0x20000>; -+ read-only; -+ }; -+ QSEE@60000 { -+ label = "QSEE"; -+ reg = <0x60000 0x60000>; -+ read-only; -+ }; -+ CDT@c0000 { -+ label = "CDT"; -+ reg = <0xc0000 0x10000>; -+ read-only; -+ }; -+ DDRPARAMS@d0000 { -+ label = "DDRPARAMS"; -+ reg = <0xd0000 0x10000>; -+ read-only; -+ }; -+ APPSBLENV@e0000 { -+ label = "APPSBLENV"; -+ reg = <0xe0000 0x10000>; -+ read-only; -+ }; -+ APPSBL@f0000 { -+ label = "APPSBL"; -+ reg = <0xf0000 0x80000>; -+ read-only; -+ }; -+ ART@170000 { -+ label = "ART"; -+ reg = <0x170000 0x10000>; -+ read-only; -+ }; -+ kernel@180000 { -+ label = "kernel"; -+ reg = <0x180000 0x400000>; -+ }; -+ rootfs@580000 { -+ label = "rootfs"; -+ reg = <0x580000 0x1600000>; -+ }; -+ firmware@180000 { -+ label = "firmware"; -+ reg = <0x180000 0x1a00000>; -+ }; -+ }; - }; diff --git a/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch b/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch deleted file mode 100644 index 2d4ff31046b9..000000000000 --- a/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -@@ -18,6 +18,7 @@ - - / { - model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; -+ compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1", "qcom,ipq4019"; - - memory { - device_type = "memory";