From: David Bauer Date: Mon, 3 Apr 2023 11:56:58 +0000 (+0200) Subject: ath79: add support for Aruba AP-115 X-Git-Tag: v23.05.0-rc2~10 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b6f2c58dd60f1e2da6c2ccfc1feb2cc1fcc158da;p=openwrt%2Fstaging%2Fhauke.git ath79: add support for Aruba AP-115 Hardware ======== CPU Qualcomm Atheros QCA9558 RAM 256MB DDR2 FLASH 2x 16M SPI-NOR (Macronix MX25L12805D) WIFI Qualcomm Atheros QCA9558 Atheros AR9590 Installation ============ 1. Attach to the serial console of the AP-105. Interrupt autoboot and change the U-Boot env. $ setenv rb_openwrt "setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; netget 0x80060000 ap115.bin; go 0x80060000" $ setenv fb_openwrt "bank 1; cp.b 0xbf100040 0x80060000 0x10000; go 0x80060000" $ setenv bootcmd "run fb_openwrt" $ saveenv 2. Load the OpenWrt initramfs image on the device using TFTP. Place the initramfs image as "ap105.bin" in the TFTP server root directory, connect it to the AP and make the server reachable at 192.168.1.66/24. $ run rb_openwrt 3. Once OpenWrt booted, transfer the sysupgrade image to the device using scp and use sysupgrade to install the firmware. Signed-off-by: David Bauer (cherry picked from commit 1b467a902ec9b8bf29805c6928627e8bbad0f14c) --- diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index 7c30aa052a..5201b8b27a 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -93,6 +93,7 @@ zyxel,nbg6616) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000" ;; aruba,ap-105|\ +aruba,ap-115|\ aruba,ap-175|\ dongwon,dw02-412h-64m|\ dongwon,dw02-412h-128m|\ diff --git a/target/linux/ath79/dts/qca9558_aruba_ap-115.dts b/target/linux/ath79/dts/qca9558_aruba_ap-115.dts new file mode 100644 index 0000000000..b8aed4c283 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_aruba_ap-115.dts @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca955x.dtsi" + +#include +#include + +/ { + compatible = "aruba,ap-115", "qca,qca9558"; + model = "Aruba AP-115"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_red; + led-running = &led_power_green; + led-upgrade = &led_power_red; + label-mac-device = ð0; + }; + + chosen { + bootargs = "console=ttyS0,9600n8"; + }; + + /** + * Currently unused GPIOs in OpenWrt: + * + * TPM-CLK: 19 + * TPM-IO: 20 + * ETH-PHY-Interrupt: 11 + * Power-DC: 22 + * Power-PoE: 23 + * Power-PoE-8023af: 17 + */ + + leds { + compatible = "gpio-leds"; + + led_power_green: power-green { + label = "green:power"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + led_power_red: power-red { + label = "red:power"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + + radio-24-green { + label = "green:radio-24"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + radio-24-amber { + label = "amber:radio-24"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + }; + + radio-5-green { + label = "green:radio-5"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + radio-5-amber { + label = "amber:radio-5"; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + }; + }; + + reg_usb_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; +}; + +&pcie0 { + status = "okay"; + + ath9k: wifi@0,0 { + compatible = "pci168c,0033"; + reg = <0x0000 0 0 0 0>; + qca,no-eeprom; + + nvmem-cells = <&macaddr_oemdata_1d>; + nvmem-cell-names = "mac-address"; + + mac-address-increment = <1>; + }; +}; + +&pinmux { + /** + * Ugly hack ahead! + * + * GPIO05: Bank1-CS / Bank2-CLK + * GPIO14: Bank1-CLK / Bank2-CS + * + * We can not support this with OpenWrt, as this + * would require us to influence the pinmux based on the CS. + * + * We force-select Bank 1. Remember to blame Aruba for that. + */ + cs0_pin5: spi-cs0-pin5 { + pinctrl-single,bits = <0x4 0x900 0xff00>; + }; + + clk_pin14: spi-cs1-pin14 { + pinctrl-single,bits = <0xc 0x0a0000 0xff0000>; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&cs0_pin5 &clk_pin14>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@1 { + label = "flash-full"; + reg = <0x0 0x1000000>; + read-only; + }; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + /* Here be dragons */ + + partition@100000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x100000 0xe00000>; + }; + + oemdata: partition@fe0000 { + label = "oemdata"; + reg = <0xfe0000 0x010000>; + read-only; + }; + + partition@ff0000 { + label = "u-boot-env"; + reg = <0xff0000 0x10000>; + }; + }; + }; +}; + +&wmac { + status = "okay"; + + qca,no-eeprom; + nvmem-cells = <&macaddr_oemdata_1d>; + nvmem-cell-names = "mac-address"; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + + reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + + eee-broken-100tx; + eee-broken-1000t; + }; +}; + +ð0 { + status = "okay"; + + nvmem-cells = <&macaddr_oemdata_1d>; + nvmem-cell-names = "mac-address"; + + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + + pll-data = <0xa6000000 0xa0000101 0xa0001313>; + + gmac-config { + device = <&gmac>; + ge0-sgmii = <0>; + txen-delay = <3>; + txd-delay = <3>; + rxdv-delay = <3>; + rxd-delay = <3>; + rgmii-enabled = <1>; + }; +}; + +&oemdata { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_oemdata_1d: macaddr@1d { + reg = <0x1d 0x6>; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; + status = "okay"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index a57479b87c..c46573ece5 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -12,6 +12,9 @@ case "$FIRMWARE" in 8dev,lima) caldata_extract "art" 0x1000 0x800 ;; + aruba,ap-115) + caldata_extract "oemdata" 0x1000 0x440 + ;; asus,pl-ac56|\ asus,rp-ac51|\ asus,rp-ac66) @@ -79,6 +82,9 @@ case "$FIRMWARE" in ;; "ath9k-eeprom-pci-0000:00:00.0.bin") case $board in + aruba,ap-115) + caldata_extract "oemdata" 0x5000 0x440 + ;; avm,fritz300e) caldata_extract_reverse "urloader" 0x1541 0x440 ;; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 788520120d..1a558c30a0 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -413,6 +413,21 @@ define Device/aruba_ap-105 endef TARGET_DEVICES += aruba_ap-105 +define Device/aruba_ap-115 + SOC := qca9558 + DEVICE_VENDOR := Aruba + DEVICE_MODEL := AP-115 + IMAGE_SIZE := 16000k + DEVICE_PACKAGES := kmod-usb2 + LOADER_TYPE := bin + LOADER_FLASH_OFFS := 0x102000 + COMPILE := loader-$(1).bin + COMPILE/loader-$(1).bin := loader-okli-compile + KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 8128 | uImage none + KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel +endef +TARGET_DEVICES += aruba_ap-115 + define Device/aruba_ap-175 SOC := ar7161 DEVICE_VENDOR := Aruba