From: John Crispin Date: Tue, 14 Jul 2015 07:40:22 +0000 (+0000) Subject: ramips: adding support for OY-0001 Wireless Router X-Git-Tag: reboot~2503 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b6185738150c84e84522df3fc953e921528dbf23;p=openwrt%2Fstaging%2Fxback.git ramips: adding support for OY-0001 Wireless Router Adding support for OY-0001 Wireless Router. OY-0001 is a wireless router made by oyewifi.com. Below is the details: MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN. Signed-off-by: Tom Deng <2579131212@qq.com> SVN-Revision: 46349 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 545bd7090a..fe3a79d14d 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -238,6 +238,10 @@ case $board in set_wifi_led "zbtlink:blue:air" set_usb_led "zbtlink:blue:usb" ;; + oy-0001) + ucidef_set_led_default "power" "power" "oy:green:power" "1" + set_wifi_led "oy:green:wifi" + ;; wr8305rt) ucidef_set_led_default "power" "power" "wr8305rt:sys" "1" set_usb_led "wr8305rt:usb" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index bc1fc0191c..9fb3535149 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -139,6 +139,7 @@ ramips_setup_interfaces() mzk-750dhp | \ whr-300hp2 | \ whr-600d | \ + oy-0001 | \ wsr-600 | \ wsr-1166 | \ wt1520 | \ @@ -283,6 +284,11 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_binary devdata 7) ;; + oy-0001) + lan_mac=$(mtd_get_mac_binary factory 40) + wan_mac=$(mtd_get_mac_binary factory 46) + ;; + w306r-v20) lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(macaddr_add "$lan_mac" 5) diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index d2a1856cd8..3d40ab9b63 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -400,6 +400,9 @@ ramips_board_detect() { *"Zbtlink ZBT-WA05") name="zbt-wa05" ;; + *"OY-0001") + name="oy-0001" + ;; *"ZBT WR8305RT") name="wr8305rt" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index cedd62bccd..8f45a84612 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -116,6 +116,7 @@ platform_check_image() { wr6202 |\ wr8305rt |\ wrtnode |\ + oy-0001 |\ wt1520 |\ wt3020 |\ x5 |\ diff --git a/target/linux/ramips/dts/OY-0001.dts b/target/linux/ramips/dts/OY-0001.dts new file mode 100644 index 0000000000..48b7099296 --- /dev/null +++ b/target/linux/ramips/dts/OY-0001.dts @@ -0,0 +1,123 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "ralink,mt7620a-soc"; + model = "OY-0001"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + gpio2: gpio@660 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q128"; + reg = <0 0>; + linux,modalias = "m25p80", "w25q128"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + + ralink,port-map = "llllw"; + }; + + gsw@10110000 { + ralink,port4 = "ephy"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + powerled { + label = "oy:green:power"; + gpios = <&gpio0 9 1>; + }; + wifiled { + label = "oy:green:wifi"; + gpios = <&gpio3 0 1>; + }; + }; + + sdhci@10130000 { + status = "okay"; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + pcie@10140000 { + status = "okay"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + s1 { + label = "reset"; + gpios = <&gpio0 1 1>; + linux,code = <0x198>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 0c282161fe..2fe5fdd1ab 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -866,6 +866,7 @@ Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l na930_mtd_size=20971520 Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size)) Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP) +Image/Build/Profile/OY-0001=$(call BuildFirmware/Default16M/$(1),$(1),oy-0001,OY-0001) Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1,Y1) Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1s,Y1S) Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221) @@ -899,6 +900,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/WHR1166D,$(1)) $(call Image/Build/Profile/MZK-750DHP,$(1)) $(call Image/Build/Profile/NA930,$(1)) + $(call Image/Build/Profile/OY-0001,$(1)) $(call Image/Build/Profile/Y1,$(1)) $(call Image/Build/Profile/Y1S,$(1)) $(call Image/Build/Profile/MLW221,$(1))