From: Robert Marko Date: Sat, 5 Feb 2022 22:40:51 +0000 (+0100) Subject: ipq807x: add Qualcomm Atheros IPQ807x target X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b5f32064ed0c3a8b897377ec2fc895dc7a5f1bc8;p=openwrt%2Fstaging%2Fthess.git ipq807x: add Qualcomm Atheros IPQ807x target Qualcomm Atheros IPQ807x is a modern WiSoC featuring: * Quad Core ARMv8 Cortex A-53 * @ 2.2 GHz (IPQ8072A/4A/6A/8A) Codename Hawkeye * @ 1.4 GHz (IPQ8070A/1A) Codename Acorn * Dual Band simultaneaous IEEE 802.11ax * 5G: 8x8/80 or 4x4/160MHz (IPQ8074A/8A) * 5G: 4x4/80 or 2x2/160MHz (IPQ8071A/2A/6A) * 5G: 2x2/80MHz (IPQ8070A) * 2G: 4x4/40MHz (IPQ8072A/4A/6A/8A) * 2G: 2x2/40MHz (IPQ8070A/1A) * 1x PSGMII via QCA8072/5 (Max 5x 1GbE ports) * 2x SGMII/USXGMII (1/2.5/5/10 GbE) on Hawkeye * 2x SGMII/USXGMII (1/2.5/5 GbE) on Acorn * DDR3L/4 32/16 bit up to 2400MT/s * SDIO 3.0/SD card 3.0/eMMC 5.1 * Dual USB 3.0 * One PCIe Gen2.1 and one PCIe Gen3.0 port (Single lane) * Parallel NAND (ONFI)/LCD * 6x QUP BLSP SPI/I2C/UART * I2S, PCM, and TDMA * HW PWM * 1.8V configurable GPIO * Companion PMP8074 PMIC via SPMI (GPIOS, RTC etc) Note that only v2 SOC models aka the ones ending with A suffix are supported, v1 models do not comply to the final 802.11ax and have lower clocks, lack the Gen3 PCIe etc. SoC itself has two UBI32 cores for the NSS offloading system, however currently no offloading is supported. Signed-off-by: Robert Marko --- diff --git a/config/Config-images.in b/config/Config-images.in index 0252ef6425..5615141b75 100644 --- a/config/Config-images.in +++ b/config/Config-images.in @@ -17,6 +17,7 @@ menu "Target Images" default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_lantiq default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_mpc85xx default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips + default TARGET_INITRAMFS_COMPRESSION_ZSTD if TARGET_ipq807x default TARGET_INITRAMFS_COMPRESSION_XZ if USES_SEPARATE_INITRAMFS default TARGET_INITRAMFS_COMPRESSION_NONE depends on TARGET_ROOTFS_INITRAMFS diff --git a/package/kernel/linux/modules/usb.mk b/package/kernel/linux/modules/usb.mk index 4ee70d7eb9..9c2e01357a 100644 --- a/package/kernel/linux/modules/usb.mk +++ b/package/kernel/linux/modules/usb.mk @@ -494,7 +494,7 @@ $(eval $(call KernelPackage,usb-dwc3)) define KernelPackage/usb-dwc3-qcom TITLE:=DWC3 Qualcomm USB driver - DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x) +kmod-usb-dwc3 + DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_ipq807x) +kmod-usb-dwc3 KCONFIG:= CONFIG_USB_DWC3_QCOM FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko AUTOLOAD:=$(call AutoLoad,53,dwc3-qcom,1) diff --git a/target/linux/ipq807x/Makefile b/target/linux/ipq807x/Makefile new file mode 100644 index 0000000000..e17013136a --- /dev/null +++ b/target/linux/ipq807x/Makefile @@ -0,0 +1,21 @@ +include $(TOPDIR)/rules.mk + +ARCH:=aarch64 +BOARD:=ipq807x +BOARDNAME:=Qualcomm Atheros IPQ807x +FEATURES:=squashfs ramdisk fpu nand rtc +KERNELNAME:=Image dtbs +CPU_TYPE:=cortex-a53 +SUBTARGETS:=generic + +KERNEL_PATCHVER:=5.15 + +include $(INCLUDE_DIR)/target.mk +DEFAULT_PACKAGES += \ + kmod-usb3 kmod-usb-dwc3 kmod-usb-dwc3-qcom \ + kmod-leds-gpio kmod-gpio-button-hotplug \ + libwolfsslcpu-crypto \ + ath11k-firmware-ipq8074 \ + wpad-basic-wolfssl uboot-envtools + +$(eval $(call BuildTarget)) diff --git a/target/linux/ipq807x/config-5.15 b/target/linux/ipq807x/config-5.15 new file mode 100644 index 0000000000..f979f9a28a --- /dev/null +++ b/target/linux/ipq807x/config-5.15 @@ -0,0 +1,507 @@ +CONFIG_64BIT=y +# CONFIG_APQ_GCC_8084 is not set +# CONFIG_APQ_MMCC_8084 is not set +CONFIG_AQUANTIA_PHY=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_KEEP_MEMBLOCK=y +CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_ARCH_MMAP_RND_BITS_MAX=24 +CONFIG_ARCH_MMAP_RND_BITS_MIN=18 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_PROC_KCORE_TEXT=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_STACKWALK=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANTS_NO_INSTR=y +CONFIG_ARM64=y +CONFIG_ARM64_4K_PAGES=y +CONFIG_ARM64_CRYPTO=y +CONFIG_ARM64_ERRATUM_1165522=y +CONFIG_ARM64_ERRATUM_1286807=y +CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y +CONFIG_ARM64_PAGE_SHIFT=12 +CONFIG_ARM64_PA_BITS=48 +CONFIG_ARM64_PA_BITS_48=y +CONFIG_ARM64_PTR_AUTH=y +CONFIG_ARM64_PTR_AUTH_KERNEL=y +CONFIG_ARM64_SVE=y +CONFIG_ARM64_TAGGED_ADDR_ABI=y +CONFIG_ARM64_VA_BITS=39 +CONFIG_ARM64_VA_BITS_39=y +CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y +CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y +CONFIG_ARM_AMBA=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_CPUIDLE=y +CONFIG_ARM_GIC=y +CONFIG_ARM_GIC_V2M=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y +CONFIG_ARM_GIC_V3_ITS_PCI=y +# CONFIG_ARM_MHU_V2 is not set +CONFIG_ARM_PSCI_CPUIDLE=y +CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y +CONFIG_ARM_PSCI_FW=y +# CONFIG_ARM_QCOM_CPUFREQ_HW is not set +CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BLK_MQ_VIRTIO=y +CONFIG_BLK_PM=y +CONFIG_CAVIUM_TX2_ERRATUM_219=y +CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMMON_CLK=y +CONFIG_COMMON_CLK_QCOM=y +# CONFIG_COMPAT_32BIT_TIME is not set +CONFIG_COREDUMP=y +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_CPU_FREQ=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_STAT is not set +CONFIG_CPU_FREQ_THERMAL=y +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_THERMAL=y +CONFIG_CRC16=y +CONFIG_CRC8=y +CONFIG_CRYPTO_AUTHENC=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_DEV_QCE=y +CONFIG_CRYPTO_DEV_QCE_AEAD=y +# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set +CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y +# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set +# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set +CONFIG_CRYPTO_DEV_QCE_SHA=y +CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y +CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512 +CONFIG_CRYPTO_DEV_QCOM_RNG=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y +CONFIG_CRYPTO_LIB_DES=y +CONFIG_CRYPTO_LIB_SHA256=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_XTS=y +CONFIG_CRYPTO_ZSTD=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEV_COREDUMP=y +CONFIG_DMADEVICES=y +CONFIG_DMA_DIRECT_REMAP=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DMA_REMAP=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DTC=y +CONFIG_DT_IDLE_STATES=y +CONFIG_EDAC_SUPPORT=y +CONFIG_FIXED_PHY=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_FRAME_POINTER=y +CONFIG_FUJITSU_ERRATUM_010001=y +CONFIG_FWNODE_MDIO=y +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_ARCH_TOPOLOGY=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GLOB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_CDEV=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HWSPINLOCK=y +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +# CONFIG_I2C_QCOM_CCI is not set +CONFIG_I2C_QUP=y +CONFIG_IIO=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IPQ_APSS_6018=y +CONFIG_IPQ_APSS_PLL=y +# CONFIG_IPQ_GCC_4019 is not set +# CONFIG_IPQ_GCC_6018 is not set +# CONFIG_IPQ_GCC_806X is not set +CONFIG_IPQ_GCC_8074=y +# CONFIG_IPQ_LCC_806X is not set +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +# CONFIG_KPSS_XCC is not set +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MAILBOX=y +# CONFIG_MAILBOX_TEST is not set +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_DEVRES=y +CONFIG_MDIO_IPQ4019=y +# CONFIG_MDM_GCC_9615 is not set +# CONFIG_MDM_LCC_9615 is not set +CONFIG_MEMFD_CREATE=y +# CONFIG_MFD_HI6421_SPMI is not set +# CONFIG_MFD_QCOM_RPM is not set +CONFIG_MFD_SPMI_PMIC=y +CONFIG_MFD_SYSCON=y +CONFIG_MIGRATION=y +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=32 +CONFIG_MMC_CQHCI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +CONFIG_MMC_SDHCI_MSM=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MODULES_USE_ELF_RELA=y +# CONFIG_MSM_GCC_8660 is not set +# CONFIG_MSM_GCC_8916 is not set +# CONFIG_MSM_GCC_8939 is not set +# CONFIG_MSM_GCC_8960 is not set +# CONFIG_MSM_GCC_8974 is not set +# CONFIG_MSM_GCC_8994 is not set +# CONFIG_MSM_GCC_8996 is not set +# CONFIG_MSM_GCC_8998 is not set +# CONFIG_MSM_GPUCC_8998 is not set +# CONFIG_MSM_LCC_8960 is not set +# CONFIG_MSM_MMCC_8960 is not set +# CONFIG_MSM_MMCC_8974 is not set +# CONFIG_MSM_MMCC_8996 is not set +# CONFIG_MSM_MMCC_8998 is not set +CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +CONFIG_MTD_NAND_QCOM=y +CONFIG_MTD_QCOMSMEM_PARTS=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_SELFTESTS=y +CONFIG_NET_SWITCHDEV=y +CONFIG_NLS=y +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NR_CPUS=4 +CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y +CONFIG_NVMEM=y +CONFIG_NVMEM_QCOM_QFPROM=y +# CONFIG_NVMEM_SPMI_SDAM is not set +CONFIG_NVMEM_SYSFS=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_PADATA=y +CONFIG_PARTITION_PERCPU=y +CONFIG_PCI=y +CONFIG_PCIEAER=y +CONFIG_PCIEASPM=y +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_PERFORMANCE is not set +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_DW=y +CONFIG_PCIE_DW_HOST=y +CONFIG_PCIE_PME=y +CONFIG_PCIE_QCOM=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PGTABLE_LEVELS=3 +CONFIG_PHYLIB=y +CONFIG_PHYS_ADDR_T_64BIT=y +# CONFIG_PHY_QCOM_APQ8064_SATA is not set +# CONFIG_PHY_QCOM_IPQ4019_USB is not set +# CONFIG_PHY_QCOM_IPQ806X_SATA is not set +# CONFIG_PHY_QCOM_IPQ806X_USB is not set +# CONFIG_PHY_QCOM_PCIE2 is not set +CONFIG_PHY_QCOM_QMP=y +CONFIG_PHY_QCOM_QUSB2=y +# CONFIG_PHY_QCOM_USB_HS_28NM is not set +# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set +# CONFIG_PHY_QCOM_USB_SS is not set +CONFIG_PINCTRL=y +# CONFIG_PINCTRL_APQ8064 is not set +# CONFIG_PINCTRL_APQ8084 is not set +# CONFIG_PINCTRL_IPQ4019 is not set +# CONFIG_PINCTRL_IPQ6018 is not set +# CONFIG_PINCTRL_IPQ8064 is not set +CONFIG_PINCTRL_IPQ8074=y +# CONFIG_PINCTRL_MDM9615 is not set +CONFIG_PINCTRL_MSM=y +# CONFIG_PINCTRL_MSM8226 is not set +# CONFIG_PINCTRL_MSM8660 is not set +# CONFIG_PINCTRL_MSM8916 is not set +# CONFIG_PINCTRL_MSM8960 is not set +# CONFIG_PINCTRL_MSM8976 is not set +# CONFIG_PINCTRL_MSM8994 is not set +# CONFIG_PINCTRL_MSM8996 is not set +# CONFIG_PINCTRL_MSM8998 is not set +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set +# CONFIG_PINCTRL_QCS404 is not set +# CONFIG_PINCTRL_SC7180 is not set +# CONFIG_PINCTRL_SDM660 is not set +# CONFIG_PINCTRL_SDM845 is not set +# CONFIG_PINCTRL_SM8150 is not set +# CONFIG_PINCTRL_SM8250 is not set +CONFIG_PM=y +# CONFIG_PM8916_WATCHDOG is not set +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +CONFIG_PM_GENERIC_DOMAINS_OF=y +CONFIG_PM_OPP=y +CONFIG_POWER_RESET=y +# CONFIG_POWER_RESET_MSM is not set +# CONFIG_POWER_RESET_QCOM_PON is not set +CONFIG_POWER_SUPPLY=y +CONFIG_PRINTK_TIME=y +CONFIG_PTP_1588_CLOCK_OPTIONAL=y +# CONFIG_QCOM_A53PLL is not set +# CONFIG_QCOM_AOSS_QMP is not set +CONFIG_QCOM_APCS_IPC=y +CONFIG_QCOM_APM=y +# CONFIG_QCOM_APR is not set +CONFIG_QCOM_BAM_DMA=y +# CONFIG_QCOM_CLK_APCC_MSM8996 is not set +# CONFIG_QCOM_CLK_APCS_MSM8916 is not set +# CONFIG_QCOM_CLK_APCS_SDX55 is not set +# CONFIG_QCOM_COINCELL is not set +# CONFIG_QCOM_COMMAND_DB is not set +# CONFIG_QCOM_CPR is not set +# CONFIG_QCOM_EBI2 is not set +# CONFIG_QCOM_FASTRPC is not set +CONFIG_QCOM_GDSC=y +# CONFIG_QCOM_GENI_SE is not set +# CONFIG_QCOM_GSBI is not set +# CONFIG_QCOM_HFPLL is not set +# CONFIG_QCOM_IPCC is not set +# CONFIG_QCOM_LLCC is not set +CONFIG_QCOM_MDT_LOADER=y +# CONFIG_QCOM_OCMEM is not set +# CONFIG_QCOM_PDC is not set +CONFIG_QCOM_PIL_INFO=y +# CONFIG_QCOM_Q6V5_ADSP is not set +CONFIG_QCOM_Q6V5_COMMON=y +# CONFIG_QCOM_Q6V5_MSS is not set +# CONFIG_QCOM_Q6V5_PAS is not set +CONFIG_QCOM_Q6V5_WCSS=y +# CONFIG_QCOM_RMTFS_MEM is not set +# CONFIG_QCOM_RPMH is not set +CONFIG_QCOM_RPROC_COMMON=y +CONFIG_QCOM_SCM=y +# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set +# CONFIG_QCOM_SMD_RPM is not set +CONFIG_QCOM_SMEM=y +CONFIG_QCOM_SMEM_STATE=y +CONFIG_QCOM_SMP2P=y +# CONFIG_QCOM_SMSM is not set +CONFIG_QCOM_SOCINFO=y +CONFIG_QCOM_SPMI_ADC5=y +# CONFIG_QCOM_SYSMON is not set +CONFIG_QCOM_TSENS=y +CONFIG_QCOM_VADC_COMMON=y +# CONFIG_QCOM_WCNSS_CTRL is not set +# CONFIG_QCOM_WCNSS_PIL is not set +CONFIG_QCOM_WDT=y +# CONFIG_QCS_GCC_404 is not set +# CONFIG_QCS_Q6SSTOP_404 is not set +# CONFIG_QCS_TURING_404 is not set +CONFIG_QUEUED_RWLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +CONFIG_RAS=y +CONFIG_RATIONAL=y +CONFIG_REGMAP=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_SPMI=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_CPR3=y +# CONFIG_REGULATOR_CPR3_NPU is not set +CONFIG_REGULATOR_CPR4_APSS=y +# CONFIG_REGULATOR_QCOM_LABIBB is not set +CONFIG_REGULATOR_QCOM_SPMI=y +# CONFIG_REGULATOR_QCOM_USB_VBUS is not set +# CONFIG_REGULATOR_VQMMC_IPQ4019 is not set +CONFIG_RELOCATABLE=y +CONFIG_REMOTEPROC=y +CONFIG_REMOTEPROC_CDEV=y +CONFIG_RESET_CONTROLLER=y +# CONFIG_RESET_QCOM_AOSS is not set +# CONFIG_RESET_QCOM_PDC is not set +CONFIG_RFS_ACCEL=y +CONFIG_RODATA_FULL_DEFAULT_ENABLED=y +CONFIG_RPMSG=y +CONFIG_RPMSG_CHAR=y +# CONFIG_RPMSG_NS is not set +CONFIG_RPMSG_QCOM_GLINK=y +CONFIG_RPMSG_QCOM_GLINK_RPM=y +CONFIG_RPMSG_QCOM_GLINK_SMEM=y +CONFIG_RPMSG_QCOM_SMD=y +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PM8XXX=y +CONFIG_RTC_I2C_AND_SPI=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +# CONFIG_SCHED_CORE is not set +CONFIG_SCHED_MC=y +CONFIG_SCHED_SMT=y +CONFIG_SCHED_THERMAL_PRESSURE=y +CONFIG_SCSI=y +CONFIG_SCSI_COMMON=y +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_PROC_FS is not set +# CONFIG_SC_DISPCC_7180 is not set +# CONFIG_SC_GCC_7180 is not set +# CONFIG_SC_GPUCC_7180 is not set +# CONFIG_SC_LPASS_CORECC_7180 is not set +# CONFIG_SC_MSS_7180 is not set +# CONFIG_SC_VIDEOCC_7180 is not set +# CONFIG_SDM_CAMCC_845 is not set +# CONFIG_SDM_DISPCC_845 is not set +# CONFIG_SDM_GCC_660 is not set +# CONFIG_SDM_GCC_845 is not set +# CONFIG_SDM_GPUCC_845 is not set +# CONFIG_SDM_LPASSCC_845 is not set +# CONFIG_SDM_VIDEOCC_845 is not set +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_SGL_ALLOC=y +CONFIG_SG_POOL=y +CONFIG_SMP=y +# CONFIG_SM_GCC_8150 is not set +# CONFIG_SM_GCC_8250 is not set +# CONFIG_SM_GPUCC_8150 is not set +# CONFIG_SM_GPUCC_8250 is not set +# CONFIG_SM_VIDEOCC_8150 is not set +# CONFIG_SM_VIDEOCC_8250 is not set +CONFIG_SOCK_RX_QUEUE_MAPPING=y +CONFIG_SOC_BUS=y +CONFIG_SPARSEMEM=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y +CONFIG_SPI_QUP=y +CONFIG_SPMI=y +# CONFIG_SPMI_HISI3670 is not set +CONFIG_SPMI_MSM_PMIC_ARB=y +# CONFIG_SPMI_PMIC_CLKDIV is not set +CONFIG_SRCU=y +CONFIG_SWIOTLB=y +CONFIG_SWPHY=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_THERMAL=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_OF=y +CONFIG_THREAD_INFO_IN_TASK=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_OF=y +CONFIG_TIMER_PROBE=y +CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y +CONFIG_TREE_RCU=y +CONFIG_TREE_SRCU=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +# CONFIG_UCLAMP_TASK is not set +CONFIG_UNMAP_KERNEL_AT_EL0=y +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_SUPPORT=y +CONFIG_VIRTIO=y +# CONFIG_VIRTIO_BLK is not set +# CONFIG_VIRTIO_NET is not set +CONFIG_VMAP_STACK=y +CONFIG_WANT_DEV_COREDUMP=y +CONFIG_WATCHDOG_CORE=y +CONFIG_WATCHDOG_SYSFS=y +CONFIG_XPS=y +CONFIG_XXHASH=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZONE_DMA32=y +CONFIG_ZSTD_COMPRESS=y +CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-512m.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-512m.dtsi new file mode 100644 index 0000000000..dace4008b3 --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-512m.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "ipq8074.dtsi" + +&tzapp_region { + reg = <0x0 0x4a400000 0x0 0x100000>; +}; + +&q6_region { + reg = <0x0 0x4b000000 0x0 0x3700000>; +}; + +&q6_etr_region { + reg = <0x0 0x4e700000 0x0 0x100000>; +}; + +&m3_dump_region { + reg = <0x0 0x4e800000 0x0 0x100000>; +}; diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi new file mode 100644 index 0000000000..dbc9baa2b9 --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ac-cpu.dtsi @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include "ipq8074-cpr-regulator.dtsi" + +&CPU0 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; + +&CPU1 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; + +&CPU2 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; + +&CPU3 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; +&cpu0_thermal { + trips { + cpu0_passive: cpu-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_passive>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu1_thermal { + trips { + cpu1_passive: cpu-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_passive>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu2_thermal { + trips { + cpu2_passive: cpu-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_passive>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu3_thermal { + trips { + cpu3_passive: cpu-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_passive>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cluster_thermal { + trips { + cluster_passive: cluster-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster_crit: cluster_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cluster_passive>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-cpr-regulator.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-cpr-regulator.dtsi new file mode 100644 index 0000000000..e351a2e759 --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-cpr-regulator.dtsi @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "pmp8074.dtsi" + +&soc { + apc_apm: apm@b111000 { + compatible = "qcom,ipq807x-apm"; + reg = <0xb111000 0x1000>; + reg-names = "pm-apcc-glb"; + qcom,apm-post-halt-delay = <0x2>; + qcom,apm-halt-clk-delay = <0x11>; + qcom,apm-resume-clk-delay = <0x10>; + qcom,apm-sel-switch-delay = <0x01>; + }; + + apc_cpr: cpr4-ctrl@b018000 { + compatible = "qcom,cpr4-ipq807x-apss-regulator"; + reg = <0xb018000 0x4000>, <0xa4000 0x1000>, <0x0193d008 0x4>; + reg-names = "cpr_ctrl", "fuse_base", "cpr_tcsr_reg"; + interrupts = ; + interrupt-names = "cpr"; + qcom,cpr-ctrl-name = "apc"; + qcom,cpr-sensor-time = <1000>; + qcom,cpr-loop-time = <5000000>; + qcom,cpr-idle-cycles = <15>; + qcom,cpr-step-quot-init-min = <12>; + qcom,cpr-step-quot-init-max = <14>; + qcom,cpr-count-mode = <0>; /* All-at-once */ + qcom,cpr-count-repeat = <14>; + qcom,cpr-down-error-step-limit = <1>; + qcom,cpr-up-error-step-limit = <1>; + qcom,apm-ctrl = <&apc_apm>; + qcom,apm-threshold-voltage = <848000>; + vdd-supply = <&s3>; + qcom,voltage-step = <8000>; + + thread@0 { + qcom,cpr-thread-id = <0>; + qcom,cpr-consecutive-up = <0>; + qcom,cpr-consecutive-down = <0>; + qcom,cpr-up-threshold = <4>; + qcom,cpr-down-threshold = <1>; + + apc_vreg: regulator { + regulator-name = "apc_corner"; + regulator-min-microvolt = <1>; + regulator-max-microvolt = <6>; + qcom,cpr-part-types = <2>; + qcom,cpr-parts-voltage = <1048000>; + qcom,cpr-parts-voltage-v2 = <992000>; + qcom,cpr-fuse-corners = <4>; + qcom,cpr-fuse-combos = <8>; + qcom,cpr-corners = <6>; + qcom,cpr-speed-bins = <1>; + qcom,cpr-speed-bin-corners = <6>; + qcom,cpr-corner-fmax-map = <1 3 5 6>; + qcom,allow-voltage-interpolation; + qcom,allow-quotient-interpolation; + qcom,cpr-scaled-open-loop-voltage-as-ceiling; + qcom,cpr-voltage-ceiling = + <840000 904000 944000 + 984000 992000 1064000>; + qcom,cpr-voltage-floor = + <592000 648000 712000 + 744000 784000 848000>; + qcom,corner-frequencies = + <1017600000 1382400000 1651200000 + 1843200000 1920000000 2208000000>; + + /* TT/FF parts i.e. turbo L1 OL voltage < 1048 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-0 = + /* Speed bin 0; CPR rev 0..7 */ + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 12000>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>; + + /* SS parts i.e turbo L1 OL voltage >= 1048 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-1 = + /* Speed bin 0; CPR rev 0..7 */ + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 20000 26000 0 20000>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>; + + /* v2 - FF parts i.e. turbo L1 OL voltage < 992 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0 = + /* Speed bin 0; CPR rev 0..7 */ + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>; + + /* v2 - SS/TT parts i.e turbo L1 OL voltage >= 992 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1 = + /* Speed bin 0; CPR rev 0..7 */ + < 0 0 0 0>, + < 0 7000 36000 4000>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>; + + /* v2 - FF parts i.e. turbo L1 OL voltage < 992 mV */ + qcom,cpr-closed-loop-voltage-adjustment-v2-0 = + /* Speed bin 0; CPR rev 0..7 */ + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>; + + /* v2 - SS/TT parts i.e turbo L1 OL voltage >= 992 mV */ + qcom,cpr-closed-loop-voltage-adjustment-v2-1 = + /* Speed bin 0; CPR rev 0..7 */ + < 0 0 0 0>, + < 0 0 19000 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>, + < 0 0 0 0>; + + qcom,cpr-ro-scaling-factor = + < 3970 4150 0 2280 2520 2470 2250 2280 + 2390 2330 2530 2500 850 2900 2510 2170 >, + < 3970 4150 0 2280 2520 2470 2250 2280 + 2390 2330 2530 2500 850 2900 2510 2170 >, + < 3970 4150 0 2280 2520 2470 2250 2280 + 2390 2330 2530 2500 850 2900 2510 2170 >, + < 3970 4150 0 2280 2520 2470 2250 2280 + 2390 2330 2530 2500 850 2900 2510 2170 >; + + qcom,cpr-floor-to-ceiling-max-range = + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>, + < 40000 40000 40000 40000 40000 40000>; + regulator-always-on; + }; + }; + }; + + npu_cpr: npu-cpr { + compatible = "qcom,cpr3-ipq807x-npu-regulator"; + reg = <0xa4000 0x1000>, <0x0193d008 0x4>; + reg-names = "fuse_base", "cpr_tcsr_reg"; + qcom,cpr-ctrl-name = "npu"; + vdd-supply = <&s4>; + qcom,voltage-step = <8000>; + thread@0 { + qcom,cpr-thread-id = <0>; + qcom,cpr-consecutive-up = <0>; + qcom,cpr-consecutive-down = <2>; + qcom,cpr-up-threshold = <2>; + qcom,cpr-down-threshold = <1>; + + npu_vreg: regulator { + regulator-name = "npu_corner"; + regulator-min-microvolt = <1>; + regulator-max-microvolt = <3>; + qcom,cpr-part-types = <2>; + qcom,cpr-parts-voltage = <968000>; + qcom,cpr-parts-voltage-v2 = <832001>; + qcom,cpr-cold-temp-threshold-v2 = <30>; + qcom,cpr-fuse-corners = <2>; + qcom,cpr-fuse-combos = <1>; + qcom,cpr-corners = <2>; + qcom,cpr-speed-bins = <1>; + qcom,cpr-speed-bin-corners = <2>; + qcom,allow-voltage-interpolation; + qcom,cpr-corner-fmax-map = <1 2>; + qcom,cpr-voltage-ceiling = + <912000 992000>; + qcom,cpr-voltage-floor = + <752000 792000>; + qcom,corner-frequencies = + <1497600000 1689600000>; + + /* TT/FF parts i.e. turbo OL voltage < 968 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-0 = + < 40000 40000>; + + /* SS parts i.e turbo OL voltage >= 968 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-1 = + < 24000 24000>; + + /* FF parts i.e. turbo OL voltage <= 832 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0= + <40000 40000>; + + /* TT/SS parts i.e turbo OL voltage > 832 mV */ + qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1= + <40000 40000>; + + /* FF parts i.e. turbo OL voltage <= 832 mV */ + qcom,cpr-cold-temp-voltage-adjustment-v2-0 = + <0 0>; + + /* TT/SS parts i.e turbo OL voltage > 832 mV */ + qcom,cpr-cold-temp-voltage-adjustment-v2-1 = + <35000 27000>; + }; + }; + }; +}; diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi new file mode 100644 index 0000000000..129266c50d --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-ess.dtsi @@ -0,0 +1,531 @@ +// SPDX-License-Identifier: GPL-2.0-only + +&clocks { + bias_pll_cc_clk { + compatible = "fixed-clock"; + clock-frequency = <300000000>; + #clock-cells = <0>; + }; + + bias_pll_nss_noc_clk { + compatible = "fixed-clock"; + clock-frequency = <416500000>; + #clock-cells = <0>; + }; +}; + +&soc { + switch: ess-switch@3a000000 { + compatible = "qcom,ess-switch-ipq807x"; + reg = <0x3a000000 0x1000000>; + switch_access_mode = "local bus"; + switch_cpu_bmp = <0x1>; /* cpu port bitmap */ + switch_inner_bmp = <0x80>; /*inner port bitmap*/ + clocks = <&gcc GCC_CMN_12GPLL_AHB_CLK>, + <&gcc GCC_CMN_12GPLL_SYS_CLK>, + <&gcc GCC_UNIPHY0_AHB_CLK>, + <&gcc GCC_UNIPHY0_SYS_CLK>, + <&gcc GCC_UNIPHY1_AHB_CLK>, + <&gcc GCC_UNIPHY1_SYS_CLK>, + <&gcc GCC_UNIPHY2_AHB_CLK>, + <&gcc GCC_UNIPHY2_SYS_CLK>, + <&gcc GCC_PORT1_MAC_CLK>, + <&gcc GCC_PORT2_MAC_CLK>, + <&gcc GCC_PORT3_MAC_CLK>, + <&gcc GCC_PORT4_MAC_CLK>, + <&gcc GCC_PORT5_MAC_CLK>, + <&gcc GCC_PORT6_MAC_CLK>, + <&gcc GCC_NSS_PPE_CLK>, + <&gcc GCC_NSS_PPE_CFG_CLK>, + <&gcc GCC_NSSNOC_PPE_CLK>, + <&gcc GCC_NSSNOC_PPE_CFG_CLK>, + <&gcc GCC_NSS_EDMA_CLK>, + <&gcc GCC_NSS_EDMA_CFG_CLK>, + <&gcc GCC_NSS_PPE_IPE_CLK>, + <&gcc GCC_NSS_PPE_BTQ_CLK>, + <&gcc GCC_MDIO_AHB_CLK>, + <&gcc GCC_NSS_NOC_CLK>, + <&gcc GCC_NSSNOC_SNOC_CLK>, + <&gcc GCC_MEM_NOC_NSS_AXI_CLK>, + <&gcc GCC_NSS_CRYPTO_CLK>, + <&gcc GCC_NSS_IMEM_CLK>, + <&gcc GCC_NSS_PTP_REF_CLK>, + <&gcc GCC_NSS_PORT1_RX_CLK>, + <&gcc GCC_NSS_PORT1_TX_CLK>, + <&gcc GCC_NSS_PORT2_RX_CLK>, + <&gcc GCC_NSS_PORT2_TX_CLK>, + <&gcc GCC_NSS_PORT3_RX_CLK>, + <&gcc GCC_NSS_PORT3_TX_CLK>, + <&gcc GCC_NSS_PORT4_RX_CLK>, + <&gcc GCC_NSS_PORT4_TX_CLK>, + <&gcc GCC_NSS_PORT5_RX_CLK>, + <&gcc GCC_NSS_PORT5_TX_CLK>, + <&gcc GCC_NSS_PORT6_RX_CLK>, + <&gcc GCC_NSS_PORT6_TX_CLK>, + <&gcc GCC_UNIPHY0_PORT1_RX_CLK>, + <&gcc GCC_UNIPHY0_PORT1_TX_CLK>, + <&gcc GCC_UNIPHY0_PORT2_RX_CLK>, + <&gcc GCC_UNIPHY0_PORT2_TX_CLK>, + <&gcc GCC_UNIPHY0_PORT3_RX_CLK>, + <&gcc GCC_UNIPHY0_PORT3_TX_CLK>, + <&gcc GCC_UNIPHY0_PORT4_RX_CLK>, + <&gcc GCC_UNIPHY0_PORT4_TX_CLK>, + <&gcc GCC_UNIPHY0_PORT5_RX_CLK>, + <&gcc GCC_UNIPHY0_PORT5_TX_CLK>, + <&gcc GCC_UNIPHY1_PORT5_RX_CLK>, + <&gcc GCC_UNIPHY1_PORT5_TX_CLK>, + <&gcc GCC_UNIPHY2_PORT6_RX_CLK>, + <&gcc GCC_UNIPHY2_PORT6_TX_CLK>, + <&gcc NSS_PORT5_RX_CLK_SRC>, + <&gcc NSS_PORT5_TX_CLK_SRC>; + clock-names = "cmn_ahb_clk", "cmn_sys_clk", + "uniphy0_ahb_clk", "uniphy0_sys_clk", + "uniphy1_ahb_clk", "uniphy1_sys_clk", + "uniphy2_ahb_clk", "uniphy2_sys_clk", + "port1_mac_clk", "port2_mac_clk", + "port3_mac_clk", "port4_mac_clk", + "port5_mac_clk", "port6_mac_clk", + "nss_ppe_clk", "nss_ppe_cfg_clk", + "nssnoc_ppe_clk", "nssnoc_ppe_cfg_clk", + "nss_edma_clk", "nss_edma_cfg_clk", + "nss_ppe_ipe_clk", "nss_ppe_btq_clk", + "gcc_mdio_ahb_clk", "gcc_nss_noc_clk", + "gcc_nssnoc_snoc_clk", + "gcc_mem_noc_nss_axi_clk", + "gcc_nss_crypto_clk", + "gcc_nss_imem_clk", + "gcc_nss_ptp_ref_clk", + "nss_port1_rx_clk", "nss_port1_tx_clk", + "nss_port2_rx_clk", "nss_port2_tx_clk", + "nss_port3_rx_clk", "nss_port3_tx_clk", + "nss_port4_rx_clk", "nss_port4_tx_clk", + "nss_port5_rx_clk", "nss_port5_tx_clk", + "nss_port6_rx_clk", "nss_port6_tx_clk", + "uniphy0_port1_rx_clk", + "uniphy0_port1_tx_clk", + "uniphy0_port2_rx_clk", + "uniphy0_port2_tx_clk", + "uniphy0_port3_rx_clk", + "uniphy0_port3_tx_clk", + "uniphy0_port4_rx_clk", + "uniphy0_port4_tx_clk", + "uniphy0_port5_rx_clk", + "uniphy0_port5_tx_clk", + "uniphy1_port5_rx_clk", + "uniphy1_port5_tx_clk", + "uniphy2_port6_rx_clk", + "uniphy2_port6_tx_clk", + "nss_port5_rx_clk_src", + "nss_port5_tx_clk_src"; + resets = <&gcc GCC_PPE_FULL_RESET>, + <&gcc GCC_UNIPHY0_SOFT_RESET>, + <&gcc GCC_UNIPHY0_XPCS_RESET>, + <&gcc GCC_UNIPHY1_SOFT_RESET>, + <&gcc GCC_UNIPHY1_XPCS_RESET>, + <&gcc GCC_UNIPHY2_SOFT_RESET>, + <&gcc GCC_UNIPHY2_XPCS_RESET>, + <&gcc GCC_NSSPORT1_RESET>, + <&gcc GCC_NSSPORT2_RESET>, + <&gcc GCC_NSSPORT3_RESET>, + <&gcc GCC_NSSPORT4_RESET>, + <&gcc GCC_NSSPORT5_RESET>, + <&gcc GCC_NSSPORT6_RESET>; + reset-names = "ppe_rst", "uniphy0_soft_rst", + "uniphy0_xpcs_rst", "uniphy1_soft_rst", + "uniphy1_xpcs_rst", "uniphy2_soft_rst", + "uniphy2_xpcs_rst", "nss_port1_rst", + "nss_port2_rst", "nss_port3_rst", + "nss_port4_rst", "nss_port5_rst", + "nss_port6_rst"; + mdio-bus = <&mdio>; + status = "disabled"; + + port_scheduler_resource { + port@0 { + port_id = <0>; + ucast_queue = <0 143>; + mcast_queue = <256 271>; + l0sp = <0 35>; + l0cdrr = <0 47>; + l0edrr = <0 47>; + l1cdrr = <0 7>; + l1edrr = <0 7>; + }; + port@1 { + port_id = <1>; + ucast_queue = <144 159>; + mcast_queue = <272 275>; + l0sp = <36 39>; + l0cdrr = <48 63>; + l0edrr = <48 63>; + l1cdrr = <8 11>; + l1edrr = <8 11>; + }; + port@2 { + port_id = <2>; + ucast_queue = <160 175>; + mcast_queue = <276 279>; + l0sp = <40 43>; + l0cdrr = <64 79>; + l0edrr = <64 79>; + l1cdrr = <12 15>; + l1edrr = <12 15>; + }; + port@3 { + port_id = <3>; + ucast_queue = <176 191>; + mcast_queue = <280 283>; + l0sp = <44 47>; + l0cdrr = <80 95>; + l0edrr = <80 95>; + l1cdrr = <16 19>; + l1edrr = <16 19>; + }; + port@4 { + port_id = <4>; + ucast_queue = <192 207>; + mcast_queue = <284 287>; + l0sp = <48 51>; + l0cdrr = <96 111>; + l0edrr = <96 111>; + l1cdrr = <20 23>; + l1edrr = <20 23>; + }; + port@5 { + port_id = <5>; + ucast_queue = <208 223>; + mcast_queue = <288 291>; + l0sp = <52 55>; + l0cdrr = <112 127>; + l0edrr = <112 127>; + l1cdrr = <24 27>; + l1edrr = <24 27>; + }; + port@6 { + port_id = <6>; + ucast_queue = <224 239>; + mcast_queue = <292 295>; + l0sp = <56 59>; + l0cdrr = <128 143>; + l0edrr = <128 143>; + l1cdrr = <28 31>; + l1edrr = <28 31>; + }; + port@7 { + port_id = <7>; + ucast_queue = <240 255>; + mcast_queue = <296 299>; + l0sp = <60 63>; + l0cdrr = <144 159>; + l0edrr = <144 159>; + l1cdrr = <32 35>; + l1edrr = <32 35>; + }; + }; + port_scheduler_config { + port@0 { + port_id = <0>; + l1scheduler { + group@0 { + sp = <0 1>; /*L0 SPs*/ + /*cpri cdrr epri edrr*/ + cfg = <0 0 0 0>; + }; + }; + l0scheduler { + group@0 { + /*unicast queues*/ + ucast_queue = <0 4 8>; + /*multicast queues*/ + mcast_queue = <256 260>; + /*sp cpri cdrr epri edrr*/ + cfg = <0 0 0 0 0>; + }; + group@1 { + ucast_queue = <1 5 9>; + mcast_queue = <257 261>; + cfg = <0 1 1 1 1>; + }; + group@2 { + ucast_queue = <2 6 10>; + mcast_queue = <258 262>; + cfg = <0 2 2 2 2>; + }; + group@3 { + ucast_queue = <3 7 11>; + mcast_queue = <259 263>; + cfg = <0 3 3 3 3>; + }; + }; + }; + port@1 { + port_id = <1>; + l1scheduler { + group@0 { + sp = <36>; + cfg = <0 8 0 8>; + }; + group@1 { + sp = <37>; + cfg = <1 9 1 9>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <144>; + ucast_loop_pri = <16>; + mcast_queue = <272>; + mcast_loop_pri = <4>; + cfg = <36 0 48 0 48>; + }; + }; + }; + port@2 { + port_id = <2>; + l1scheduler { + group@0 { + sp = <40>; + cfg = <0 12 0 12>; + }; + group@1 { + sp = <41>; + cfg = <1 13 1 13>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <160>; + ucast_loop_pri = <16>; + mcast_queue = <276>; + mcast_loop_pri = <4>; + cfg = <40 0 64 0 64>; + }; + }; + }; + port@3 { + port_id = <3>; + l1scheduler { + group@0 { + sp = <44>; + cfg = <0 16 0 16>; + }; + group@1 { + sp = <45>; + cfg = <1 17 1 17>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <176>; + ucast_loop_pri = <16>; + mcast_queue = <280>; + mcast_loop_pri = <4>; + cfg = <44 0 80 0 80>; + }; + }; + }; + port@4 { + port_id = <4>; + l1scheduler { + group@0 { + sp = <48>; + cfg = <0 20 0 20>; + }; + group@1 { + sp = <49>; + cfg = <1 21 1 21>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <192>; + ucast_loop_pri = <16>; + mcast_queue = <284>; + mcast_loop_pri = <4>; + cfg = <48 0 96 0 96>; + }; + }; + }; + port@5 { + port_id = <5>; + l1scheduler { + group@0 { + sp = <52>; + cfg = <0 24 0 24>; + }; + group@1 { + sp = <53>; + cfg = <1 25 1 25>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <208>; + ucast_loop_pri = <16>; + mcast_queue = <288>; + mcast_loop_pri = <4>; + cfg = <52 0 112 0 112>; + }; + }; + }; + port@6 { + port_id = <6>; + l1scheduler { + group@0 { + sp = <56>; + cfg = <0 28 0 28>; + }; + group@1 { + sp = <57>; + cfg = <1 29 1 29>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <224>; + ucast_loop_pri = <16>; + mcast_queue = <292>; + mcast_loop_pri = <4>; + cfg = <56 0 128 0 128>; + }; + }; + }; + port@7 { + port_id = <7>; + l1scheduler { + group@0 { + sp = <60>; + cfg = <0 32 0 32>; + }; + group@1 { + sp = <61>; + cfg = <1 33 1 33>; + }; + }; + l0scheduler { + group@0 { + ucast_queue = <240>; + ucast_loop_pri = <16>; + mcast_queue = <296>; + cfg = <60 0 144 0 144>; + }; + }; + }; + }; + }; + + ess-uniphy@7a00000 { + compatible = "qcom,ess-uniphy"; + reg = <0x7a00000 0x30000>; + uniphy_access_mode = "local bus"; + }; + + edma: edma@3ab00000 { + compatible = "qcom,edma"; + reg = <0x3ab00000 0x76900>; + reg-names = "edma-reg-base"; + qcom,txdesc-ring-start = <23>; + qcom,txdesc-rings = <1>; + qcom,txcmpl-ring-start = <7>; + qcom,txcmpl-rings = <1>; + qcom,rxfill-ring-start = <7>; + qcom,rxfill-rings = <1>; + qcom,rxdesc-ring-start = <15>; + qcom,rxdesc-rings = <1>; + interrupts = , + , + , + ; + resets = <&gcc GCC_EDMA_HW_RESET>; + reset-names = "edma_rst"; + status = "disabled"; + }; + + dp1: dp1 { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <1>; + reg = <0x3a001000 0x200>; + qcom,mactype = <0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp2: dp2 { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <2>; + reg = <0x3a001200 0x200>; + qcom,mactype = <0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp3: dp3 { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <3>; + reg = <0x3a001400 0x200>; + qcom,mactype = <0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp4: dp4 { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <4>; + reg = <0x3a001600 0x200>; + qcom,mactype = <0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp5: dp5 { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <5>; + reg = <0x3a001800 0x200>; + qcom,mactype = <0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp6: dp6 { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <6>; + reg = <0x3a001a00 0x200>; + qcom,mactype = <0>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp5_syn: dp5-syn { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <5>; + reg = <0x3a003000 0x3fff>; + qcom,mactype = <1>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; + + dp6_syn: dp6-syn { + device_type = "network"; + compatible = "qcom,nss-dp"; + qcom,id = <6>; + reg = <0x3a007000 0x3fff>; + qcom,mactype = <1>; + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + status = "disabled"; + }; +}; diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi new file mode 100644 index 0000000000..8485814969 --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-hk-cpu.dtsi @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include "ipq8074-cpr-regulator.dtsi" + +&CPU0 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; + +&CPU1 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; + +&CPU2 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; + +&CPU3 { + cpu-supply = <&apc_vreg>; + voltage-tolerance = <1>; +}; +&cpu0_thermal { + trips { + cpu0_passive_low: cpu-passive-low { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_passive_high: cpu-passive-high { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_passive_low>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_passive_high>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu1_thermal { + trips { + cpu1_passive_low: cpu-passive-low { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_passive_high: cpu-passive-high { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_passive_low>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_passive_high>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu2_thermal { + trips { + cpu2_passive_low: cpu-passive-low { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_passive_high: cpu-passive-high { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_passive_low>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_passive_high>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cpu3_thermal { + trips { + cpu3_passive_low: cpu-passive-low { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_passive_high: cpu-passive-high { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_passive_low>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_passive_high>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&cluster_thermal { + trips { + cluster_passive_low: cluster-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster_passive_high: cluster-passive-high { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster_crit: cluster_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cluster_passive_low>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cluster_passive_high>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; diff --git a/target/linux/ipq807x/generic/target.mk b/target/linux/ipq807x/generic/target.mk new file mode 100644 index 0000000000..f5cb1fb19b --- /dev/null +++ b/target/linux/ipq807x/generic/target.mk @@ -0,0 +1 @@ +BOARDNAME:=Generic diff --git a/target/linux/ipq807x/image/Makefile b/target/linux/ipq807x/image/Makefile new file mode 100644 index 0000000000..f59ad0c15f --- /dev/null +++ b/target/linux/ipq807x/image/Makefile @@ -0,0 +1,17 @@ +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +define Device/Default + PROFILES := Default + KERNEL_LOADADDR := 0x41000000 + DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1))) + DEVICE_DTS_CONFIG := config@1 + DEVICE_DTS_DIR := $(DTS_DIR)/qcom + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata + IMAGE/sysupgrade.bin/squashfs := +endef + +include $(SUBTARGET).mk + +$(eval $(call BuildImage)) diff --git a/target/linux/ipq807x/image/generic.mk b/target/linux/ipq807x/image/generic.mk new file mode 100644 index 0000000000..91a3daeedf --- /dev/null +++ b/target/linux/ipq807x/image/generic.mk @@ -0,0 +1,18 @@ +define Device/FitImage + KERNEL_SUFFIX := -uImage.itb + KERNEL = kernel-bin | libdeflate-gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb + KERNEL_NAME := Image +endef + +define Device/FitImageLzma + KERNEL_SUFFIX := -uImage.itb + KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb + KERNEL_NAME := Image +endef + +define Device/UbiFit + KERNEL_IN_UBI := 1 + IMAGES := factory.ubi sysupgrade.bin + IMAGE/factory.ubi := append-ubi + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef diff --git a/target/linux/ipq807x/patches-5.15/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch b/target/linux/ipq807x/patches-5.15/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch new file mode 100644 index 0000000000..c988814156 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0001-v5.16-arm64-dts-qcom-ipq8074-add-SPMI-bus.patch @@ -0,0 +1,43 @@ +From adf62d2727d4aa2b587e2db59eafb5be776a653c Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sun, 5 Sep 2021 18:58:16 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add SPMI bus + +IPQ8074 uses SPMI for communication with the PMIC, so +since its already supported add the DT node for it. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20210905165816.655275-1-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -293,6 +293,25 @@ + #reset-cells = <0x1>; + }; + ++ spmi_bus: spmi@200f000 { ++ compatible = "qcom,spmi-pmic-arb"; ++ reg = <0x0200f000 0x001000>, ++ <0x02400000 0x800000>, ++ <0x02c00000 0x800000>, ++ <0x03800000 0x200000>, ++ <0x0200a000 0x000700>; ++ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; ++ interrupts = ; ++ interrupt-names = "periph_irq"; ++ qcom,ee = <0>; ++ qcom,channel = <0>; ++ #address-cells = <2>; ++ #size-cells = <0>; ++ interrupt-controller; ++ #interrupt-cells = <4>; ++ cell-index = <0>; ++ }; ++ + sdhc_1: sdhci@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x500>, <0x7824000 0x800>; diff --git a/target/linux/ipq807x/patches-5.15/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch b/target/linux/ipq807x/patches-5.15/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch new file mode 100644 index 0000000000..ec4c3552f0 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0002-v5.16-arm64-dts-qcom-Update-BAM-DMA-node-name-per-DT-schem.patch @@ -0,0 +1,26 @@ +From 94343612f165fc8b4f95fcbe6fd044d6f63d4a28 Mon Sep 17 00:00:00 2001 +From: Shawn Guo +Date: Tue, 31 Aug 2021 13:23:25 +0800 +Subject: [PATCH] arm64: dts: qcom: Update BAM DMA node name per DT schema + +Follow dma-controller.yaml schema to use `dma-controller` as node name +of BAM DMA devices. + +Signed-off-by: Shawn Guo +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20210831052325.21229-1-shawn.guo@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -212,7 +212,7 @@ + status = "disabled"; + }; + +- cryptobam: dma@704000 { ++ cryptobam: dma-controller@704000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; + interrupts = ; diff --git a/target/linux/ipq807x/patches-5.15/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch b/target/linux/ipq807x/patches-5.15/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch new file mode 100644 index 0000000000..4cc81e64c4 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0003-v5.16-arm64-dts-qcom-ipq8074-Add-QUP5-I2C-node.patch @@ -0,0 +1,40 @@ +From ccc5b088058bccdf454bd296867c47e56c415cde Mon Sep 17 00:00:00 2001 +From: Chukun Pan +Date: Fri, 1 Oct 2021 22:54:21 +0800 +Subject: [PATCH] arm64: dts: qcom: ipq8074: Add QUP5 I2C node + +Add node to support the QUP5 I2C controller inside of IPQ8074. +It is exactly the same as QUP2 controllers. +Some routers like ZTE MF269 use this bus. + +Signed-off-by: Chukun Pan +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20211001145421.18302-1-amadeus@jmu.edu.cn +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -430,6 +430,21 @@ + status = "disabled"; + }; + ++ blsp1_i2c5: i2c@78b9000 { ++ compatible = "qcom,i2c-qup-v2.2.1"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x78b9000 0x600>; ++ interrupts = ; ++ clocks = <&gcc GCC_BLSP1_AHB_CLK>, ++ <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; ++ clock-names = "iface", "core"; ++ clock-frequency = <400000>; ++ dmas = <&blsp_dma 21>, <&blsp_dma 20>; ++ dma-names = "rx", "tx"; ++ status = "disabled"; ++ }; ++ + blsp1_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch b/target/linux/ipq807x/patches-5.15/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch new file mode 100644 index 0000000000..b001e81b3a --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0004-v5.16-arm64-dts-qcom-msm8996-Move-clock-cells-to-QMP-PHY-c.patch @@ -0,0 +1,53 @@ +From 1a82d7080001d395563ad8266d120d4cf63ad0a5 Mon Sep 17 00:00:00 2001 +From: Shawn Guo +Date: Wed, 29 Sep 2021 11:42:46 +0800 +Subject: [PATCH] arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY + child node + +'#clock-cells' is a required property of QMP PHY child node, not itself. +Move it to fix the dtbs_check warnings. + +There are only '#clock-cells' removal from SM8350 QMP PHY nodes, because +child nodes already have the property. + +Signed-off-by: Shawn Guo +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20210929034253.24570-4-shawn.guo@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -91,7 +91,6 @@ + ssphy_1: phy@58000 { + compatible = "qcom,ipq8074-qmp-usb3-phy"; + reg = <0x00058000 0x1c4>; +- #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; +@@ -112,6 +111,7 @@ + <0x00058800 0x1f8>, /* PCS */ + <0x00058600 0x044>; /* PCS misc*/ + #phy-cells = <0>; ++ #clock-cells = <1>; + clocks = <&gcc GCC_USB1_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb1_pipe_clk_src"; +@@ -134,7 +134,6 @@ + ssphy_0: phy@78000 { + compatible = "qcom,ipq8074-qmp-usb3-phy"; + reg = <0x00078000 0x1c4>; +- #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; +@@ -155,6 +154,7 @@ + <0x00078800 0x1f8>, /* PCS */ + <0x00078600 0x044>; /* PCS misc*/ + #phy-cells = <0>; ++ #clock-cells = <1>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb0_pipe_clk_src"; diff --git a/target/linux/ipq807x/patches-5.15/0006-v5.16-arm64-dts-qcom-Fix-IPQ8074-PCIe-PHY-nodes.patch b/target/linux/ipq807x/patches-5.15/0006-v5.16-arm64-dts-qcom-Fix-IPQ8074-PCIe-PHY-nodes.patch new file mode 100644 index 0000000000..51b58ed238 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0006-v5.16-arm64-dts-qcom-Fix-IPQ8074-PCIe-PHY-nodes.patch @@ -0,0 +1,94 @@ +From a9ab8f5de2fc752e37918cfd5dcd16d625d9ecb2 Mon Sep 17 00:00:00 2001 +From: Shawn Guo +Date: Wed, 29 Sep 2021 11:42:51 +0800 +Subject: [PATCH] arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes + +IPQ8074 PCIe PHY nodes are broken in the many ways: + +- '#address-cells', '#size-cells' and 'ranges' are missing. +- Child phy/lane node is missing, and the child properties like + '#phy-cells' and 'clocks' are mistakenly put into parent node. +- The clocks properties for parent node are missing. + +Fix them to get the nodes comply with the bindings schema. + +Signed-off-by: Shawn Guo +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20210929034253.24570-9-shawn.guo@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 46 +++++++++++++++++++++------ + 1 file changed, 36 insertions(+), 10 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -174,34 +174,60 @@ + status = "disabled"; + }; + +- pcie_phy0: phy@86000 { ++ pcie_qmp0: phy@86000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; + reg = <0x00086000 0x1000>; +- #phy-cells = <0>; +- clocks = <&gcc GCC_PCIE0_PIPE_CLK>; +- clock-names = "pipe_clk"; +- clock-output-names = "pcie20_phy0_pipe_clk"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; + ++ clocks = <&gcc GCC_PCIE0_AUX_CLK>, ++ <&gcc GCC_PCIE0_AHB_CLK>; ++ clock-names = "aux", "cfg_ahb"; + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", + "common"; + status = "disabled"; ++ ++ pcie_phy0: phy@86200 { ++ reg = <0x86200 0x16c>, ++ <0x86400 0x200>, ++ <0x86800 0x4f4>; ++ #phy-cells = <0>; ++ #clock-cells = <0>; ++ clocks = <&gcc GCC_PCIE0_PIPE_CLK>; ++ clock-names = "pipe0"; ++ clock-output-names = "pcie_0_pipe_clk"; ++ }; + }; + +- pcie_phy1: phy@8e000 { ++ pcie_qmp1: phy@8e000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; + reg = <0x0008e000 0x1000>; +- #phy-cells = <0>; +- clocks = <&gcc GCC_PCIE1_PIPE_CLK>; +- clock-names = "pipe_clk"; +- clock-output-names = "pcie20_phy1_pipe_clk"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; + ++ clocks = <&gcc GCC_PCIE1_AUX_CLK>, ++ <&gcc GCC_PCIE1_AHB_CLK>; ++ clock-names = "aux", "cfg_ahb"; + resets = <&gcc GCC_PCIE1_PHY_BCR>, + <&gcc GCC_PCIE1PHY_PHY_BCR>; + reset-names = "phy", + "common"; + status = "disabled"; ++ ++ pcie_phy1: phy@8e200 { ++ reg = <0x8e200 0x16c>, ++ <0x8e400 0x200>, ++ <0x8e800 0x4f4>; ++ #phy-cells = <0>; ++ #clock-cells = <0>; ++ clocks = <&gcc GCC_PCIE1_PIPE_CLK>; ++ clock-names = "pipe0"; ++ clock-output-names = "pcie_1_pipe_clk"; ++ }; + }; + + prng: rng@e3000 { diff --git a/target/linux/ipq807x/patches-5.15/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch b/target/linux/ipq807x/patches-5.15/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch new file mode 100644 index 0000000000..30f09db23a --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0007-v5.17-arm64-dts-qcom-ipq8074-add-MDIO-bus.patch @@ -0,0 +1,36 @@ +From 036e332e29ee24396ad877cc6a1275d86a1c4b3d Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Thu, 7 Oct 2021 13:58:46 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add MDIO bus + +IPQ8074 uses an IPQ4019 compatible MDIO controller that is already +supported in the kernel, so add the DT node in order to use it. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20211007115846.26255-1-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -230,6 +230,18 @@ + }; + }; + ++ mdio: mdio@90000 { ++ compatible = "qcom,ipq4019-mdio"; ++ reg = <0x00090000 0x64>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ clocks = <&gcc GCC_MDIO_AHB_CLK>; ++ clock-names = "gcc_mdio_ahb_clk"; ++ ++ status = "disabled"; ++ }; ++ + prng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; diff --git a/target/linux/ipq807x/patches-5.15/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch b/target/linux/ipq807x/patches-5.15/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch new file mode 100644 index 0000000000..df8edfc8d9 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0008-v5.18-arm64-dts-qcom-ipq8074-add-SMEM-support.patch @@ -0,0 +1,51 @@ +From 29e135cf87900ac1da457bb27e98e30ca7f723ea Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Thu, 6 Jan 2022 22:25:12 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add SMEM support + +IPQ8074 uses SMEM like other modern QCA SoC-s, so since its already +supported by the kernel add the required DT nodes. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220106212512.1970828-1-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -76,6 +76,20 @@ + method = "smc"; + }; + ++ reserved-memory { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ranges; ++ ++ smem@4ab00000 { ++ compatible = "qcom,smem"; ++ reg = <0x0 0x4ab00000 0x0 0x00100000>; ++ no-map; ++ ++ hwlocks = <&tcsr_mutex 0>; ++ }; ++ }; ++ + firmware { + scm { + compatible = "qcom,scm-ipq8074", "qcom,scm"; +@@ -331,6 +345,12 @@ + #reset-cells = <0x1>; + }; + ++ tcsr_mutex: hwlock@1905000 { ++ compatible = "qcom,tcsr-mutex"; ++ reg = <0x01905000 0x20000>; ++ #hwlock-cells = <1>; ++ }; ++ + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, diff --git a/target/linux/ipq807x/patches-5.15/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch b/target/linux/ipq807x/patches-5.15/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch new file mode 100644 index 0000000000..6b0db7092d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0009-v5.18-arm64-dts-qcom-ipq8074-add-the-reserved-memory-node.patch @@ -0,0 +1,30 @@ +From 0f1cdeea7f237de21f244c06f2c102f93dbd9c4e Mon Sep 17 00:00:00 2001 +From: Kathiravan T +Date: Fri, 7 Jan 2022 18:24:38 +0530 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add the reserved-memory node + +On IPQ8074, 4MB of memory is needed for TZ. So mark that region +as reserved. + +Signed-off-by: Kathiravan T +[bjorn: Squash with existing reserved-memory node] +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/1641560078-860-1-git-send-email-quic_kathirav@quicinc.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -88,6 +88,11 @@ + + hwlocks = <&tcsr_mutex 0>; + }; ++ ++ memory@4ac00000 { ++ no-map; ++ reg = <0x0 0x4ac00000 0x0 0x00400000>; ++ }; + }; + + firmware { diff --git a/target/linux/ipq807x/patches-5.15/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch b/target/linux/ipq807x/patches-5.15/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch new file mode 100644 index 0000000000..6c4bf78fab --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0010-v5.18-arm64-dts-qcom-ipq8074-enable-the-GICv2m-support.patch @@ -0,0 +1,36 @@ +From a505f23abf0c31f40a2c3070d82e961b7c045664 Mon Sep 17 00:00:00 2001 +From: Kathiravan T +Date: Tue, 8 Feb 2022 21:05:24 +0530 +Subject: [PATCH] arm64: dts: qcom: ipq8074: enable the GICv2m support + +GIC used in the IPQ8074 SoCs has one instance of the GICv2m extension, +which supports upto 32 MSI interrupts. Lets add support for the same. + +Signed-off-by: Kathiravan T +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/1644334525-11577-2-git-send-email-quic_kathirav@quicinc.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -634,9 +634,18 @@ + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; ++ #address-cells = <1>; ++ #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <0x3>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; ++ ranges = <0 0xb00a000 0xffd>; ++ ++ v2m@0 { ++ compatible = "arm,gic-v2m-frame"; ++ msi-controller; ++ reg = <0x0 0xffd>; ++ }; + }; + + timer { diff --git a/target/linux/ipq807x/patches-5.15/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch b/target/linux/ipq807x/patches-5.15/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch new file mode 100644 index 0000000000..09236e3c8c --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0011-v5.18-arm64-dts-qcom-ipq8074-drop-the-clock-frequency-prop.patch @@ -0,0 +1,25 @@ +From 2a73fa24be1d5a263062696f55dcc90725f9159c Mon Sep 17 00:00:00 2001 +From: Kathiravan T +Date: Wed, 2 Feb 2022 22:05:08 +0530 +Subject: [PATCH] arm64: dts: qcom: ipq8074: drop the clock-frequency property + +Drop the clock-frequency property from the MMIO timer node, since it +is already configured by the bootloader. + +Signed-off-by: Kathiravan T +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/1643819709-5410-2-git-send-email-quic_kathirav@quicinc.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 - + 1 file changed, 1 deletion(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -670,7 +670,6 @@ + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; +- clock-frequency = <19200000>; + + frame@b120000 { + frame-number = <0>; diff --git a/target/linux/ipq807x/patches-5.15/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch b/target/linux/ipq807x/patches-5.15/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch new file mode 100644 index 0000000000..d7d31cae89 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0012-v5.19-arm64-dts-qcom-align-dmas-in-I2C-SPI-UART-with-DT-sc.patch @@ -0,0 +1,61 @@ +From 6f39b05b13e7be39919fd8d235bb0e63ecabf190 Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski +Date: Tue, 5 Apr 2022 08:34:43 +0200 +Subject: [PATCH] arm64: dts: qcom: align dmas in I2C/SPI/UART with DT schema + +The DT schema expects dma channels in tx-rx order. No functional +change. + +Signed-off-by: Krzysztof Kozlowski +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220405063451.12011-2-krzysztof.kozlowski@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -471,8 +471,8 @@ + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; +- dmas = <&blsp_dma 15>, <&blsp_dma 14>; +- dma-names = "rx", "tx"; ++ dmas = <&blsp_dma 14>, <&blsp_dma 15>; ++ dma-names = "tx", "rx"; + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "disabled"; +@@ -488,8 +488,8 @@ + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <100000>; +- dmas = <&blsp_dma 17>, <&blsp_dma 16>; +- dma-names = "rx", "tx"; ++ dmas = <&blsp_dma 16>, <&blsp_dma 17>; ++ dma-names = "tx", "rx"; + status = "disabled"; + }; + +@@ -503,8 +503,8 @@ + <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; +- dmas = <&blsp_dma 21>, <&blsp_dma 20>; +- dma-names = "rx", "tx"; ++ dmas = <&blsp_dma 20>, <&blsp_dma 21>; ++ dma-names = "tx", "rx"; + status = "disabled"; + }; + +@@ -518,8 +518,8 @@ + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <100000>; +- dmas = <&blsp_dma 23>, <&blsp_dma 22>; +- dma-names = "rx", "tx"; ++ dmas = <&blsp_dma 22>, <&blsp_dma 23>; ++ dma-names = "tx", "rx"; + status = "disabled"; + }; + diff --git a/target/linux/ipq807x/patches-5.15/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch b/target/linux/ipq807x/patches-5.15/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch new file mode 100644 index 0000000000..8270120925 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0013-v5.19-arm64-dts-qcom-align-clocks-in-I2C-SPI-with-DT-schem.patch @@ -0,0 +1,68 @@ +From 61d4a1751cfe5a22e5f18478fe16ffb1ee12607d Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski +Date: Tue, 5 Apr 2022 08:34:44 +0200 +Subject: [PATCH] arm64: dts: qcom: align clocks in I2C/SPI with DT schema + +The DT schema expects clocks core-iface order. No functional change. + +Signed-off-by: Krzysztof Kozlowski +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220405063451.12011-3-krzysztof.kozlowski@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 24 ++++++++++++------------ + 1 file changed, 12 insertions(+), 12 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -467,9 +467,9 @@ + #size-cells = <0>; + reg = <0x078b6000 0x600>; + interrupts = ; +- clocks = <&gcc GCC_BLSP1_AHB_CLK>, +- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; +- clock-names = "iface", "core"; ++ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, ++ <&gcc GCC_BLSP1_AHB_CLK>; ++ clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; +@@ -484,9 +484,9 @@ + #size-cells = <0>; + reg = <0x078b7000 0x600>; + interrupts = ; +- clocks = <&gcc GCC_BLSP1_AHB_CLK>, +- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; +- clock-names = "iface", "core"; ++ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, ++ <&gcc GCC_BLSP1_AHB_CLK>; ++ clock-names = "core", "iface"; + clock-frequency = <100000>; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; +@@ -499,9 +499,9 @@ + #size-cells = <0>; + reg = <0x78b9000 0x600>; + interrupts = ; +- clocks = <&gcc GCC_BLSP1_AHB_CLK>, +- <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; +- clock-names = "iface", "core"; ++ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, ++ <&gcc GCC_BLSP1_AHB_CLK>; ++ clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; +@@ -514,9 +514,9 @@ + #size-cells = <0>; + reg = <0x078ba000 0x600>; + interrupts = ; +- clocks = <&gcc GCC_BLSP1_AHB_CLK>, +- <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; +- clock-names = "iface", "core"; ++ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, ++ <&gcc GCC_BLSP1_AHB_CLK>; ++ clock-names = "core", "iface"; + clock-frequency = <100000>; + dmas = <&blsp_dma 22>, <&blsp_dma 23>; + dma-names = "tx", "rx"; diff --git a/target/linux/ipq807x/patches-5.15/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch b/target/linux/ipq807x/patches-5.15/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch new file mode 100644 index 0000000000..923bffadec --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0014-v5.19-arm64-dts-qcom-correct-DWC3-node-names-and-unit-addr.patch @@ -0,0 +1,36 @@ +From ee9002a825695b5dca76f758a9365ca7f7d18265 Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski +Date: Wed, 4 May 2022 15:19:16 +0200 +Subject: [PATCH] arm64: dts: qcom: correct DWC3 node names and unit addresses + +Align DWC3 USB node names with DT schema ("usb" is expected) and correct +the unit addresses to match the "reg" property. This also implies +overriding nodes by label, instead of full path. + +Signed-off-by: Krzysztof Kozlowski +Link: https://lore.kernel.org/r/20220504131923.214367-7-krzysztof.kozlowski@linaro.org +Signed-off-by: Greg Kroah-Hartman +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -578,7 +578,7 @@ + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + +- dwc_0: dwc3@8a00000 { ++ dwc_0: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x8a00000 0xcd00>; + interrupts = ; +@@ -618,7 +618,7 @@ + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + +- dwc_1: dwc3@8c00000 { ++ dwc_1: usb@8c00000 { + compatible = "snps,dwc3"; + reg = <0x8c00000 0xcd00>; + interrupts = ; diff --git a/target/linux/ipq807x/patches-5.15/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch b/target/linux/ipq807x/patches-5.15/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch new file mode 100644 index 0000000000..5ec722cf6c --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0015-v5.19-arm64-dts-qcom-ipq8074-add-dedicated-qcom-ipq8074-dw.patch @@ -0,0 +1,36 @@ +From 71061acf1a9343317e4d34a2c4578ed9301112cc Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski +Date: Wed, 4 May 2022 15:19:17 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add dedicated qcom,ipq8074-dwc3 + compatible + +Add dedicated compatible for DWC3 USB node name to allow more accurate +DT schema matching. + +Signed-off-by: Krzysztof Kozlowski +Link: https://lore.kernel.org/r/20220504131923.214367-8-krzysztof.kozlowski@linaro.org +Signed-off-by: Greg Kroah-Hartman +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -553,7 +553,7 @@ + }; + + usb_0: usb@8af8800 { +- compatible = "qcom,dwc3"; ++ compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; + reg = <0x08af8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; +@@ -593,7 +593,7 @@ + }; + + usb_1: usb@8cf8800 { +- compatible = "qcom,dwc3"; ++ compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; + reg = <0x08cf8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch b/target/linux/ipq807x/patches-5.15/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch new file mode 100644 index 0000000000..cc4c348233 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0016-v5.19-arm64-dts-qcom-align-DWC3-USB-clocks-with-DT-schema.patch @@ -0,0 +1,39 @@ +From 159cbe595c1018a0172c637374ec69af643fa9f5 Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski +Date: Wed, 4 May 2022 15:19:22 +0200 +Subject: [PATCH] arm64: dts: qcom: align DWC3 USB clocks with DT schema + +Align order of clocks and their names with Qualcomm DWC3 USB DT schema. +No functional impact expected. + +Signed-off-by: Krzysztof Kozlowski +Link: https://lore.kernel.org/r/20220504131923.214367-13-krzysztof.kozlowski@linaro.org +Signed-off-by: Greg Kroah-Hartman +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -563,8 +563,8 @@ + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; +- clock-names = "sys_noc_axi", +- "master", ++ clock-names = "cfg_noc", ++ "core", + "sleep", + "mock_utmi"; + +@@ -603,8 +603,8 @@ + <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_SLEEP_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; +- clock-names = "sys_noc_axi", +- "master", ++ clock-names = "cfg_noc", ++ "core", + "sleep", + "mock_utmi"; + diff --git a/target/linux/ipq807x/patches-5.15/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch b/target/linux/ipq807x/patches-5.15/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch new file mode 100644 index 0000000000..515582da5c --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0017-v6.0-arm64-dts-qcom-adjust-whitespace-around.patch @@ -0,0 +1,36 @@ +From a9f7dc27469ca9588d7aa572bdfdfd5f0f1aab6a Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski +Date: Thu, 26 May 2022 22:42:47 +0200 +Subject: [PATCH] arm64: dts: qcom: adjust whitespace around '=' + +Fix whitespace coding style: use single space instead of tabs or +multiple spaces around '=' sign in property assignment. No functional +changes (same DTB). + +Signed-off-by: Krzysztof Kozlowski +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220526204248.832139-1-krzysztof.kozlowski@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -119,7 +119,7 @@ + <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + +- resets = <&gcc GCC_USB1_PHY_BCR>, ++ resets = <&gcc GCC_USB1_PHY_BCR>, + <&gcc GCC_USB3PHY_1_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; +@@ -162,7 +162,7 @@ + <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + +- resets = <&gcc GCC_USB0_PHY_BCR>, ++ resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; diff --git a/target/linux/ipq807x/patches-5.15/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch b/target/linux/ipq807x/patches-5.15/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch new file mode 100644 index 0000000000..529f6715f2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0018-v6.0-arm64-dts-qcom-Fix-sdhci-node-names-use-mmc.patch @@ -0,0 +1,34 @@ +From 2e9703ffe97a1c447c0d00c061526fbeeade6107 Mon Sep 17 00:00:00 2001 +From: Bhupesh Sharma +Date: Sun, 15 May 2022 03:24:19 +0530 +Subject: [PATCH] arm64: dts: qcom: Fix sdhci node names - use 'mmc@' + +Since the Qualcomm sdhci-msm device-tree binding has been converted +to yaml format, 'make dtbs_check' reports issues with +inconsistent 'sdhci@' convention used for specifying the +sdhci nodes. The generic mmc bindings expect 'mmc@' format +instead. + +Fix the same. + +Cc: Bjorn Andersson +Cc: Rob Herring +Signed-off-by: Bhupesh Sharma +[bjorn: Moved non-arm64 changes to separate commit] +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220514215424.1007718-2-bhupesh.sharma@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -375,7 +375,7 @@ + cell-index = <0>; + }; + +- sdhc_1: sdhci@7824900 { ++ sdhc_1: mmc@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x500>, <0x7824000 0x800>; + reg-names = "hc_mem", "core_mem"; diff --git a/target/linux/ipq807x/patches-5.15/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch b/target/linux/ipq807x/patches-5.15/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch new file mode 100644 index 0000000000..0fe6b3ab47 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0019-v6.0-arm64-dts-qcom-Fix-ordering-of-clocks-clock-names-fo.patch @@ -0,0 +1,47 @@ +From 18363f691e931abf0e9bdc9b5169fb15aa10224d Mon Sep 17 00:00:00 2001 +From: Bhupesh Sharma +Date: Sun, 15 May 2022 03:24:22 +0530 +Subject: [PATCH] arm64: dts: qcom: Fix ordering of 'clocks' & 'clock-names' + for sdhci nodes + +Since the Qualcomm sdhci-msm device-tree binding has been converted +to yaml format, 'make dtbs_check' reports a number of issues with +ordering of 'clocks' & 'clock-names' for sdhci nodes: + + arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900: + clock-names:0: 'iface' was expected + + arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900: + clock-names:1: 'core' was expected + + arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900: + clock-names:2: 'xo' was expected + +Fix the same by updating the offending 'dts' files. + +Cc: Bjorn Andersson +Cc: Rob Herring +Signed-off-by: Bhupesh Sharma +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220514215424.1007718-5-bhupesh.sharma@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -384,10 +384,10 @@ + ; + interrupt-names = "hc_irq", "pwr_irq"; + +- clocks = <&xo>, +- <&gcc GCC_SDCC1_AHB_CLK>, +- <&gcc GCC_SDCC1_APPS_CLK>; +- clock-names = "xo", "iface", "core"; ++ clocks = <&gcc GCC_SDCC1_AHB_CLK>, ++ <&gcc GCC_SDCC1_APPS_CLK>, ++ <&xo>; ++ clock-names = "iface", "core", "xo"; + max-frequency = <384000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; diff --git a/target/linux/ipq807x/patches-5.15/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch b/target/linux/ipq807x/patches-5.15/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch new file mode 100644 index 0000000000..f2055d94b1 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0020-v6.0-dt-bindings-clock-qcom-ipq8074-add-PPE-crypto-clock.patch @@ -0,0 +1,25 @@ +From aa14b0c11f6442cd489d33c2855941055a3d4fa6 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sun, 15 May 2022 23:00:41 +0200 +Subject: [PATCH] dt-bindings: clock: qcom: ipq8074: add PPE crypto clock + +Add binding for the PPE crypto clock in IPQ8074. + +Signed-off-by: Robert Marko +Acked-by: Krzysztof Kozlowski +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220515210048.483898-4-robimarko@gmail.com +--- + include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 + + 1 file changed, 1 insertion(+) + +--- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h ++++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h +@@ -233,6 +233,7 @@ + #define GCC_PCIE0_AXI_S_BRIDGE_CLK 224 + #define GCC_PCIE0_RCHNG_CLK_SRC 225 + #define GCC_PCIE0_RCHNG_CLK 226 ++#define GCC_CRYPTO_PPE_CLK 227 + + #define GCC_BLSP1_BCR 0 + #define GCC_BLSP1_QUP1_BCR 1 diff --git a/target/linux/ipq807x/patches-5.15/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch b/target/linux/ipq807x/patches-5.15/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch new file mode 100644 index 0000000000..71fd33331d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0021-v6.0-clk-qcom-ipq8074-add-PPE-crypto-clock.patch @@ -0,0 +1,52 @@ +From f91d0e8bd6c1f812bc2589050c05a90ee886c749 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sun, 15 May 2022 23:00:42 +0200 +Subject: [PATCH] clk: qcom: ipq8074: add PPE crypto clock + +The built-in PPE engine has a dedicated clock for the EIP-197 crypto +engine. + +So, since the required clock currently missing add support for it. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220515210048.483898-5-robimarko@gmail.com +--- + drivers/clk/qcom/gcc-ipq8074.c | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -3183,6 +3183,24 @@ static struct clk_branch gcc_nss_ptp_ref + }, + }; + ++static struct clk_branch gcc_crypto_ppe_clk = { ++ .halt_reg = 0x68310, ++ .halt_bit = 31, ++ .clkr = { ++ .enable_reg = 0x68310, ++ .enable_mask = BIT(0), ++ .hw.init = &(struct clk_init_data){ ++ .name = "gcc_crypto_ppe_clk", ++ .parent_names = (const char *[]){ ++ "nss_ppe_clk_src" ++ }, ++ .num_parents = 1, ++ .flags = CLK_SET_RATE_PARENT, ++ .ops = &clk_branch2_ops, ++ }, ++ }, ++}; ++ + static struct clk_branch gcc_nssnoc_ce_apb_clk = { + .halt_reg = 0x6830c, + .clkr = { +@@ -4655,6 +4673,7 @@ static struct clk_regmap *gcc_ipq8074_cl + [GCC_PCIE0_RCHNG_CLK_SRC] = &pcie0_rchng_clk_src.clkr, + [GCC_PCIE0_RCHNG_CLK] = &gcc_pcie0_rchng_clk.clkr, + [GCC_PCIE0_AXI_S_BRIDGE_CLK] = &gcc_pcie0_axi_s_bridge_clk.clkr, ++ [GCC_CRYPTO_PPE_CLK] = &gcc_crypto_ppe_clk.clkr, + }; + + static const struct qcom_reset_map gcc_ipq8074_resets[] = { diff --git a/target/linux/ipq807x/patches-5.15/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch b/target/linux/ipq807x/patches-5.15/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch new file mode 100644 index 0000000000..908ed233b2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0022-v6.0-dt-bindings-clock-qcom-ipq8074-add-USB-GDSCs.patch @@ -0,0 +1,25 @@ +From f5441c669d5442d247c69bab3eb27c074c0dd19a Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sun, 15 May 2022 23:00:45 +0200 +Subject: [PATCH] dt-bindings: clock: qcom: ipq8074: add USB GDSCs + +Add bindings for the USB GDSCs found in IPQ8074 GCC. + +Signed-off-by: Robert Marko +Acked-by: Krzysztof Kozlowski +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220515210048.483898-8-robimarko@gmail.com +--- + include/dt-bindings/clock/qcom,gcc-ipq8074.h | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h ++++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h +@@ -368,4 +368,7 @@ + #define GCC_PCIE1_AXI_MASTER_STICKY_ARES 130 + #define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 131 + ++#define USB0_GDSC 0 ++#define USB1_GDSC 1 ++ + #endif diff --git a/target/linux/ipq807x/patches-5.15/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch b/target/linux/ipq807x/patches-5.15/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch new file mode 100644 index 0000000000..7fcb190578 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0023-v6.0-clk-qcom-ipq8074-add-USB-GDSCs.patch @@ -0,0 +1,79 @@ +From ff35d239b7b64f71d7dd9d0ce887647de2cacfcc Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sun, 15 May 2022 23:00:46 +0200 +Subject: [PATCH] clk: qcom: ipq8074: add USB GDSCs + +Add GDSC-s for each of the two USB controllers built-in the IPQ8074. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220515210048.483898-9-robimarko@gmail.com +--- + drivers/clk/qcom/Kconfig | 1 + + drivers/clk/qcom/gcc-ipq8074.c | 24 ++++++++++++++++++++++++ + 2 files changed, 25 insertions(+) + +--- a/drivers/clk/qcom/Kconfig ++++ b/drivers/clk/qcom/Kconfig +@@ -166,6 +166,7 @@ config IPQ_LCC_806X + + config IPQ_GCC_8074 + tristate "IPQ8074 Global Clock Controller" ++ select QCOM_GDSC + help + Support for global clock controller on ipq8074 devices. + Say Y if you want to use peripheral devices such as UART, SPI, +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -22,6 +22,7 @@ + #include "clk-alpha-pll.h" + #include "clk-regmap-divider.h" + #include "clk-regmap-mux.h" ++#include "gdsc.h" + #include "reset.h" + + enum { +@@ -4408,6 +4409,22 @@ static struct clk_branch gcc_pcie0_axi_s + }, + }; + ++static struct gdsc usb0_gdsc = { ++ .gdscr = 0x3e078, ++ .pd = { ++ .name = "usb0_gdsc", ++ }, ++ .pwrsts = PWRSTS_OFF_ON, ++}; ++ ++static struct gdsc usb1_gdsc = { ++ .gdscr = 0x3f078, ++ .pd = { ++ .name = "usb1_gdsc", ++ }, ++ .pwrsts = PWRSTS_OFF_ON, ++}; ++ + static const struct alpha_pll_config ubi32_pll_config = { + .l = 0x4e, + .config_ctl_val = 0x200d4aa8, +@@ -4811,6 +4828,11 @@ static const struct qcom_reset_map gcc_i + [GCC_PCIE1_AXI_MASTER_STICKY_ARES] = { 0x76040, 6 }, + }; + ++static struct gdsc *gcc_ipq8074_gdscs[] = { ++ [USB0_GDSC] = &usb0_gdsc, ++ [USB1_GDSC] = &usb1_gdsc, ++}; ++ + static const struct of_device_id gcc_ipq8074_match_table[] = { + { .compatible = "qcom,gcc-ipq8074" }, + { } +@@ -4833,6 +4855,8 @@ static const struct qcom_cc_desc gcc_ipq + .num_resets = ARRAY_SIZE(gcc_ipq8074_resets), + .clk_hws = gcc_ipq8074_hws, + .num_clk_hws = ARRAY_SIZE(gcc_ipq8074_hws), ++ .gdscs = gcc_ipq8074_gdscs, ++ .num_gdscs = ARRAY_SIZE(gcc_ipq8074_gdscs), + }; + + static int gcc_ipq8074_probe(struct platform_device *pdev) diff --git a/target/linux/ipq807x/patches-5.15/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch b/target/linux/ipq807x/patches-5.15/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch new file mode 100644 index 0000000000..99ff26577d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0024-v6.0-arm64-dts-qcom-ipq8074-add-USB-power-domains.patch @@ -0,0 +1,43 @@ +From 53211e85006ebb9bf7fb4482288639612f3146e7 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sun, 15 May 2022 23:00:48 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add USB power domains + +Add USB power domains provided by GCC GDSCs. +Add the required #power-domain-cells to the GCC as well. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220515210048.483898-11-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -347,6 +347,7 @@ + compatible = "qcom,gcc-ipq8074"; + reg = <0x01800000 0x80000>; + #clock-cells = <0x1>; ++ #power-domain-cells = <1>; + #reset-cells = <0x1>; + }; + +@@ -575,6 +576,8 @@ + <133330000>, + <19200000>; + ++ power-domains = <&gcc USB0_GDSC>; ++ + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + +@@ -615,6 +618,8 @@ + <133330000>, + <19200000>; + ++ power-domains = <&gcc USB1_GDSC>; ++ + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + diff --git a/target/linux/ipq807x/patches-5.15/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch b/target/linux/ipq807x/patches-5.15/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch new file mode 100644 index 0000000000..8f3dd35991 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0025-v6.0-arm64-dts-qcom-ipq8074-move-ARMv8-timer-out-of-SoC-n.patch @@ -0,0 +1,50 @@ +From 85a9cab9b9bb471eae016cdbfabd928585c23cce Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Mon, 4 Jul 2022 13:33:18 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: move ARMv8 timer out of SoC node + +The ARM timer is usually considered not part of SoC node, just like +other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning: + +arch/arm64/boot/dts/qcom/ipq8072-ax9000.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'} + From schema: dtschema/schemas/simple-bus.yaml + +Signed-off-by: Robert Marko +Acked-by: Krzysztof Kozlowski +[bjorn: Moved node after "soc" for alphabetical ordering] +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220704113318.623102-1-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -653,14 +653,6 @@ + }; + }; + +- timer { +- compatible = "arm,armv8-timer"; +- interrupts = , +- , +- , +- ; +- }; +- + watchdog: watchdog@b017000 { + compatible = "qcom,kpss-wdt"; + reg = <0xb017000 0x1000>; +@@ -852,4 +844,12 @@ + status = "disabled"; + }; + }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = , ++ , ++ , ++ ; ++ }; + }; diff --git a/target/linux/ipq807x/patches-5.15/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch b/target/linux/ipq807x/patches-5.15/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch new file mode 100644 index 0000000000..b1a3010bf8 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0026-v6.0-arm64-dts-qcom-ipq8074-add-reset-to-SDHCI.patch @@ -0,0 +1,27 @@ +From 8e6af077ced3931ac18e37f0eb3fc6f1a20b0e4a Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Mon, 4 Jul 2022 16:35:54 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add reset to SDHCI + +Add reset to SDHCI controller so it can be reset to avoid timeout issues +after software reset due to bootloader set configuration. + +Signed-off-by: Robert Marko +Reviewed-by: Konrad Dybcio +Acked-by: Krzysztof Kozlowski +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220704143554.1180927-2-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -389,6 +389,7 @@ + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo>; + clock-names = "iface", "core", "xo"; ++ resets = <&gcc GCC_SDCC1_BCR>; + max-frequency = <384000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; diff --git a/target/linux/ipq807x/patches-5.15/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch b/target/linux/ipq807x/patches-5.15/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch new file mode 100644 index 0000000000..f69159a849 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0027-v6.0-arm64-dts-qcom-ipq8074-drop-USB-PHY-clock-index.patch @@ -0,0 +1,36 @@ +From 0171978734227bdd7813bc6d805f609126e3849e Mon Sep 17 00:00:00 2001 +From: Johan Hovold +Date: Tue, 5 Jul 2022 13:40:22 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: drop USB PHY clock index + +The QMP USB PHY provides a single clock so drop the redundant clock +index. + +Signed-off-by: Johan Hovold +Reviewed-by: Dmitry Baryshkov +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220705114032.22787-5-johan+linaro@kernel.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -130,7 +130,7 @@ + <0x00058800 0x1f8>, /* PCS */ + <0x00058600 0x044>; /* PCS misc*/ + #phy-cells = <0>; +- #clock-cells = <1>; ++ #clock-cells = <0>; + clocks = <&gcc GCC_USB1_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb1_pipe_clk_src"; +@@ -173,7 +173,7 @@ + <0x00078800 0x1f8>, /* PCS */ + <0x00078600 0x044>; /* PCS misc*/ + #phy-cells = <0>; +- #clock-cells = <1>; ++ #clock-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb0_pipe_clk_src"; diff --git a/target/linux/ipq807x/patches-5.15/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch b/target/linux/ipq807x/patches-5.15/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch new file mode 100644 index 0000000000..e50c66f531 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0028-v5.16-mailbox-qcom-apcs-ipc-Consolidate-msm8994-type-apcs_.patch @@ -0,0 +1,74 @@ +From a6e1d17fbfd41113bf47345e65953873e717ca63 Mon Sep 17 00:00:00 2001 +From: Shawn Guo +Date: Tue, 14 Sep 2021 09:40:48 +0800 +Subject: [PATCH] mailbox: qcom-apcs-ipc: Consolidate msm8994 type apcs_data + +The msm8994 type of apcs_data is defined multiple times with different +SoC name encoded. Consolidate them on msm8994 and remove the data +duplication. + +Signed-off-by: Shawn Guo +Signed-off-by: Jassi Brar +--- + drivers/mailbox/qcom-apcs-ipc-mailbox.c | 26 +++++-------------------- + 1 file changed, 5 insertions(+), 21 deletions(-) + +--- a/drivers/mailbox/qcom-apcs-ipc-mailbox.c ++++ b/drivers/mailbox/qcom-apcs-ipc-mailbox.c +@@ -33,10 +33,6 @@ static const struct qcom_apcs_ipc_data i + .offset = 8, .clk_name = "qcom,apss-ipq6018-clk" + }; + +-static const struct qcom_apcs_ipc_data ipq8074_apcs_data = { +- .offset = 8, .clk_name = NULL +-}; +- + static const struct qcom_apcs_ipc_data msm8916_apcs_data = { + .offset = 8, .clk_name = "qcom-apcs-msm8916-clk" + }; +@@ -49,18 +45,6 @@ static const struct qcom_apcs_ipc_data m + .offset = 16, .clk_name = NULL + }; + +-static const struct qcom_apcs_ipc_data msm8998_apcs_data = { +- .offset = 8, .clk_name = NULL +-}; +- +-static const struct qcom_apcs_ipc_data sdm660_apcs_data = { +- .offset = 8, .clk_name = NULL +-}; +- +-static const struct qcom_apcs_ipc_data sm6125_apcs_data = { +- .offset = 8, .clk_name = NULL +-}; +- + static const struct qcom_apcs_ipc_data apps_shared_apcs_data = { + .offset = 12, .clk_name = NULL + }; +@@ -160,21 +144,21 @@ static int qcom_apcs_ipc_remove(struct p + /* .data is the offset of the ipc register within the global block */ + static const struct of_device_id qcom_apcs_ipc_of_match[] = { + { .compatible = "qcom,ipq6018-apcs-apps-global", .data = &ipq6018_apcs_data }, +- { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &ipq8074_apcs_data }, ++ { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,msm8916-apcs-kpss-global", .data = &msm8916_apcs_data }, + { .compatible = "qcom,msm8939-apcs-kpss-global", .data = &msm8916_apcs_data }, + { .compatible = "qcom,msm8953-apcs-kpss-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,msm8994-apcs-kpss-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,msm8996-apcs-hmss-global", .data = &msm8996_apcs_data }, +- { .compatible = "qcom,msm8998-apcs-hmss-global", .data = &msm8998_apcs_data }, ++ { .compatible = "qcom,msm8998-apcs-hmss-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,qcs404-apcs-apps-global", .data = &msm8916_apcs_data }, + { .compatible = "qcom,sc7180-apss-shared", .data = &apps_shared_apcs_data }, + { .compatible = "qcom,sc8180x-apss-shared", .data = &apps_shared_apcs_data }, +- { .compatible = "qcom,sdm660-apcs-hmss-global", .data = &sdm660_apcs_data }, ++ { .compatible = "qcom,sdm660-apcs-hmss-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,sdm845-apss-shared", .data = &apps_shared_apcs_data }, +- { .compatible = "qcom,sm6125-apcs-hmss-global", .data = &sm6125_apcs_data }, ++ { .compatible = "qcom,sm6125-apcs-hmss-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,sm8150-apss-shared", .data = &apps_shared_apcs_data }, +- { .compatible = "qcom,sm6115-apcs-hmss-global", .data = &sdm660_apcs_data }, ++ { .compatible = "qcom,sm6115-apcs-hmss-global", .data = &msm8994_apcs_data }, + { .compatible = "qcom,sdx55-apcs-gcc", .data = &sdx55_apcs_data }, + {} + }; diff --git a/target/linux/ipq807x/patches-5.15/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch b/target/linux/ipq807x/patches-5.15/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch new file mode 100644 index 0000000000..cd1dcf2ba2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0029-v6.1-mailbox-qcom-apcs-ipc-add-IPQ8074-APSS-clock-support.patch @@ -0,0 +1,30 @@ +From 28e239ecd69a99748181bfdf5d2238ff1a8d0646 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:08:48 +0200 +Subject: [PATCH] mailbox: qcom-apcs-ipc: add IPQ8074 APSS clock support + +IPQ8074 has the APSS clock controller utilizing the same register space as +the APCS, so provide access to the APSS utilizing a child device like +IPQ6018. + +IPQ6018 and IPQ8074 use the same controller and driver, so just utilize +IPQ6018 match data for IPQ8074. + +Signed-off-by: Robert Marko +Reviewed-by: Dmitry Baryshkov +Signed-off-by: Jassi Brar +--- + drivers/mailbox/qcom-apcs-ipc-mailbox.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mailbox/qcom-apcs-ipc-mailbox.c ++++ b/drivers/mailbox/qcom-apcs-ipc-mailbox.c +@@ -144,7 +144,7 @@ static int qcom_apcs_ipc_remove(struct p + /* .data is the offset of the ipc register within the global block */ + static const struct of_device_id qcom_apcs_ipc_of_match[] = { + { .compatible = "qcom,ipq6018-apcs-apps-global", .data = &ipq6018_apcs_data }, +- { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &msm8994_apcs_data }, ++ { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &ipq6018_apcs_data }, + { .compatible = "qcom,msm8916-apcs-kpss-global", .data = &msm8916_apcs_data }, + { .compatible = "qcom,msm8939-apcs-kpss-global", .data = &msm8916_apcs_data }, + { .compatible = "qcom,msm8953-apcs-kpss-global", .data = &msm8994_apcs_data }, diff --git a/target/linux/ipq807x/patches-5.15/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch b/target/linux/ipq807x/patches-5.15/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch new file mode 100644 index 0000000000..92414d4319 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0030-v6.0-arm64-dts-qcom-ipq8074-add-APCS-node.patch @@ -0,0 +1,37 @@ +From aea90e172420a062197849d7914b2fa032de0228 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Thu, 7 Jul 2022 19:37:33 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add APCS node + +APCS now has support for providing the APSS clocks as the child device +for IPQ8074. + +So, add the required DT node for it as it will later be used as the CPU +clocksource. + +Signed-off-by: Robert Marko +Reviewed-by: Dmitry Baryshkov +[bjorn: Sorted node based on address] +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220707173733.404947-4-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -662,6 +662,14 @@ + timeout-sec = <30>; + }; + ++ apcs_glb: mailbox@b111000 { ++ compatible = "qcom,ipq8074-apcs-apps-global"; ++ reg = <0x0b111000 0x6000>; ++ ++ #clock-cells = <1>; ++ #mbox-cells = <1>; ++ }; ++ + timer@b120000 { + #address-cells = <1>; + #size-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch b/target/linux/ipq807x/patches-5.15/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch new file mode 100644 index 0000000000..8fae8ade75 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0031-v6.0-arm64-dts-qcom-ipq8074-add-size-address-cells-to-DTS.patch @@ -0,0 +1,54 @@ +From a3f36600fd758173c1ec315684e4ae72c6e85654 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 8 Jul 2022 15:38:45 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add #size/address-cells to DTSI + +Add #size-cells and #address-cells to the SoC DTSI to avoid duplicating +the same properties in board DTS files. + +Remove the mentioned properties from current board DTS files. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220708133846.599735-1-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 2 -- + arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 3 --- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 +++ + 3 files changed, 3 insertions(+), 5 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +@@ -5,8 +5,6 @@ + #include "ipq8074.dtsi" + + / { +- #address-cells = <0x2>; +- #size-cells = <0x2>; + model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; + compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; + interrupt-parent = <&intc>; +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +@@ -7,9 +7,6 @@ + #include "ipq8074.dtsi" + + / { +- #address-cells = <0x2>; +- #size-cells = <0x2>; +- + interrupt-parent = <&intc>; + + aliases { +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -7,6 +7,9 @@ + #include + + / { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ + model = "Qualcomm Technologies, Inc. IPQ8074"; + compatible = "qcom,ipq8074"; + diff --git a/target/linux/ipq807x/patches-5.15/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch b/target/linux/ipq807x/patches-5.15/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch new file mode 100644 index 0000000000..27a43c43ea --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0032-v6.0-arm64-dts-qcom-ipq8074-add-interrupt-parent-to-DTSI.patch @@ -0,0 +1,50 @@ +From 7d57ca4d56856b7f7b97adda6e97cf5db4dcce93 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 8 Jul 2022 15:38:46 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add interrupt-parent to DTSI + +Add interrupt-parent to the SoC DTSI to avoid duplicating it in each board +DTS file. + +Remove interrupt-parent from existing board DTS files. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220708133846.599735-2-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 1 - + arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 2 -- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 + + 3 files changed, 1 insertion(+), 3 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +@@ -7,7 +7,6 @@ + / { + model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; + compatible = "qcom,ipq8074-hk01", "qcom,ipq8074"; +- interrupt-parent = <&intc>; + + aliases { + serial0 = &blsp1_uart5; +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +@@ -7,8 +7,6 @@ + #include "ipq8074.dtsi" + + / { +- interrupt-parent = <&intc>; +- + aliases { + serial0 = &blsp1_uart5; + }; +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -12,6 +12,7 @@ + + model = "Qualcomm Technologies, Inc. IPQ8074"; + compatible = "qcom,ipq8074"; ++ interrupt-parent = <&intc>; + + clocks { + sleep_clk: sleep_clk { diff --git a/target/linux/ipq807x/patches-5.15/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch b/target/linux/ipq807x/patches-5.15/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch new file mode 100644 index 0000000000..566c26399e --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0033-v6.1-arm64-dts-qcom-align-SDHCI-reg-names-with-DT-schema.patch @@ -0,0 +1,28 @@ +From a19df563230af392f2e84e57d69367f96b4a8c56 Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski +Date: Tue, 12 Jul 2022 16:42:43 +0200 +Subject: [PATCH] arm64: dts: qcom: align SDHCI reg-names with DT schema + +DT schema requires SDHCI reg names to be hc/core without "_mem" suffix, +just like TXT bindings were expecting before the conversion. + +Signed-off-by: Krzysztof Kozlowski +Reviewed-by: Douglas Anderson +Reviewed-by: Konrad Dybcio +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220712144245.17417-4-krzysztof.kozlowski@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -383,7 +383,7 @@ + sdhc_1: mmc@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x500>, <0x7824000 0x800>; +- reg-names = "hc_mem", "core_mem"; ++ reg-names = "hc", "core"; + + interrupts = , + ; diff --git a/target/linux/ipq807x/patches-5.15/0034-v6.1-arm64-dts-qcom-ipq8074-fix-PCIe-PHY-serdes-size.patch b/target/linux/ipq807x/patches-5.15/0034-v6.1-arm64-dts-qcom-ipq8074-fix-PCIe-PHY-serdes-size.patch new file mode 100644 index 0000000000..c2a9e02927 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0034-v6.1-arm64-dts-qcom-ipq8074-fix-PCIe-PHY-serdes-size.patch @@ -0,0 +1,37 @@ +From 8f63346a74c8b3e37ffab2c7a2ddb3c08793dcc2 Mon Sep 17 00:00:00 2001 +From: Johan Hovold +Date: Thu, 15 Sep 2022 16:34:30 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size + +The size of the PCIe PHY serdes register region is 0x1c4 and the +corresponding 'reg' property should specifically not include the +adjacent regions that are defined in the child node (e.g. tx and rx). + +Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes") +Signed-off-by: Johan Hovold +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220915143431.19842-1-johan+linaro@kernel.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -199,7 +199,7 @@ + + pcie_qmp0: phy@86000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; +- reg = <0x00086000 0x1000>; ++ reg = <0x00086000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; +@@ -227,7 +227,7 @@ + + pcie_qmp1: phy@8e000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; +- reg = <0x0008e000 0x1000>; ++ reg = <0x0008e000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; diff --git a/target/linux/ipq807x/patches-5.15/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch b/target/linux/ipq807x/patches-5.15/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch new file mode 100644 index 0000000000..2faf82baeb --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0035-v6.1-clk-qcom-apss-ipq-pll-use-OF-match-data-for-Alpha-PL.patch @@ -0,0 +1,70 @@ +From 7bd608426c407a79debea54b2b243950f330c5b8 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:06:24 +0200 +Subject: [PATCH] clk: qcom: apss-ipq-pll: use OF match data for Alpha PLL + config + +Convert the driver to use OF match data for providing the Alpha PLL config +per compatible. +This is required for IPQ8074 support since it uses a different Alpha PLL +config. + +While we are here rename "ipq_pll_config" to "ipq6018_pll_config" to make +it clear that it is for IPQ6018 only. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818220628.339366-5-robimarko@gmail.com +--- + drivers/clk/qcom/apss-ipq-pll.c | 12 +++++++++--- + 1 file changed, 9 insertions(+), 3 deletions(-) + +--- a/drivers/clk/qcom/apss-ipq-pll.c ++++ b/drivers/clk/qcom/apss-ipq-pll.c +@@ -2,6 +2,7 @@ + // Copyright (c) 2018, The Linux Foundation. All rights reserved. + #include + #include ++#include + #include + #include + +@@ -36,7 +37,7 @@ static struct clk_alpha_pll ipq_pll = { + }, + }; + +-static const struct alpha_pll_config ipq_pll_config = { ++static const struct alpha_pll_config ipq6018_pll_config = { + .l = 0x37, + .config_ctl_val = 0x04141200, + .config_ctl_hi_val = 0x0, +@@ -54,6 +55,7 @@ static const struct regmap_config ipq_pl + + static int apss_ipq_pll_probe(struct platform_device *pdev) + { ++ const struct alpha_pll_config *ipq_pll_config; + struct device *dev = &pdev->dev; + struct regmap *regmap; + void __iomem *base; +@@ -67,7 +69,11 @@ static int apss_ipq_pll_probe(struct pla + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + +- clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config); ++ ipq_pll_config = of_device_get_match_data(&pdev->dev); ++ if (!ipq_pll_config) ++ return -ENODEV; ++ ++ clk_alpha_pll_configure(&ipq_pll, regmap, ipq_pll_config); + + ret = devm_clk_register_regmap(dev, &ipq_pll.clkr); + if (ret) +@@ -78,7 +84,7 @@ static int apss_ipq_pll_probe(struct pla + } + + static const struct of_device_id apss_ipq_pll_match_table[] = { +- { .compatible = "qcom,ipq6018-a53pll" }, ++ { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config }, + { } + }; + MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table); diff --git a/target/linux/ipq807x/patches-5.15/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch b/target/linux/ipq807x/patches-5.15/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch new file mode 100644 index 0000000000..4e1bb8aff2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0036-v6.1-clk-qcom-apss-ipq-pll-update-IPQ6018-Alpha-PLL-confi.patch @@ -0,0 +1,40 @@ +From d22c8f1bd94602d1bf2b377c3befe54e749b963d Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:06:25 +0200 +Subject: [PATCH] clk: qcom: apss-ipq-pll: update IPQ6018 Alpha PLL config + +Update the IPQ6018 Alpha PLL config to the latest one from the downstream +5.4 kernel[1]. + +This one should match the production SoC-s. + +Tested on IPQ6018 CP01-C1 reference board. + +[1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.1.r4/drivers/clk/qcom/apss-ipq-pll.c#L41 + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818220628.339366-6-robimarko@gmail.com +--- + drivers/clk/qcom/apss-ipq-pll.c | 8 ++++++-- + 1 file changed, 6 insertions(+), 2 deletions(-) + +--- a/drivers/clk/qcom/apss-ipq-pll.c ++++ b/drivers/clk/qcom/apss-ipq-pll.c +@@ -39,10 +39,14 @@ static struct clk_alpha_pll ipq_pll = { + + static const struct alpha_pll_config ipq6018_pll_config = { + .l = 0x37, +- .config_ctl_val = 0x04141200, +- .config_ctl_hi_val = 0x0, ++ .config_ctl_val = 0x240d4828, ++ .config_ctl_hi_val = 0x6, + .early_output_mask = BIT(3), ++ .aux2_output_mask = BIT(2), ++ .aux_output_mask = BIT(1), + .main_output_mask = BIT(0), ++ .test_ctl_val = 0x1c0000C0, ++ .test_ctl_hi_val = 0x4000, + }; + + static const struct regmap_config ipq_pll_regmap_config = { diff --git a/target/linux/ipq807x/patches-5.15/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch b/target/linux/ipq807x/patches-5.15/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch new file mode 100644 index 0000000000..f5f18acb1b --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0037-v6.1-clk-qcom-apss-ipq-pll-add-support-for-IPQ8074.patch @@ -0,0 +1,47 @@ +From e0a711bd88ba98f6ab5118d248ec84fcf495d313 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:06:26 +0200 +Subject: [PATCH] clk: qcom: apss-ipq-pll: add support for IPQ8074 + +Add support for IPQ8074 since it uses the same PLL setup, however it uses +slightly different Alpha PLL config. + +Alpha PLL config was obtained by dumping PLL registers from a running +device. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818220628.339366-7-robimarko@gmail.com +--- + drivers/clk/qcom/apss-ipq-pll.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/drivers/clk/qcom/apss-ipq-pll.c ++++ b/drivers/clk/qcom/apss-ipq-pll.c +@@ -49,6 +49,18 @@ static const struct alpha_pll_config ipq + .test_ctl_hi_val = 0x4000, + }; + ++static const struct alpha_pll_config ipq8074_pll_config = { ++ .l = 0x48, ++ .config_ctl_val = 0x200d4828, ++ .config_ctl_hi_val = 0x6, ++ .early_output_mask = BIT(3), ++ .aux2_output_mask = BIT(2), ++ .aux_output_mask = BIT(1), ++ .main_output_mask = BIT(0), ++ .test_ctl_val = 0x1c000000, ++ .test_ctl_hi_val = 0x4000, ++}; ++ + static const struct regmap_config ipq_pll_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, +@@ -89,6 +101,7 @@ static int apss_ipq_pll_probe(struct pla + + static const struct of_device_id apss_ipq_pll_match_table[] = { + { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config }, ++ { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_config }, + { } + }; + MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table); diff --git a/target/linux/ipq807x/patches-5.15/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch b/target/linux/ipq807x/patches-5.15/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch new file mode 100644 index 0000000000..451066099d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0038-v6.1-clk-qcom-clk-rcg2-add-rcg2-mux-ops.patch @@ -0,0 +1,51 @@ +From f7fb35d540240889a8f45f3fd42363cbc1a448e2 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 19 Aug 2022 00:06:20 +0200 +Subject: [PATCH] clk: qcom: clk-rcg2: add rcg2 mux ops + +An RCG may act as a mux that switch between 2 parents. +This is the case on IPQ6018 and IPQ8074 where the APCS core clk that feeds +the CPU cluster clock just switches between XO and the PLL that feeds it. + +Add the required ops to add support for this special configuration and use +the generic mux function to determine the rate. + +This way we dont have to keep a essentially dummy frequency table to use +RCG2 as a mux. + +Signed-off-by: Christian Marangi +Signed-off-by: Robert Marko +Reviewed-by: Dmitry Baryshkov +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818220628.339366-1-robimarko@gmail.com +--- + drivers/clk/qcom/clk-rcg.h | 1 + + drivers/clk/qcom/clk-rcg2.c | 7 +++++++ + 2 files changed, 8 insertions(+) + +--- a/drivers/clk/qcom/clk-rcg.h ++++ b/drivers/clk/qcom/clk-rcg.h +@@ -164,6 +164,7 @@ struct clk_rcg2_gfx3d { + + extern const struct clk_ops clk_rcg2_ops; + extern const struct clk_ops clk_rcg2_floor_ops; ++extern const struct clk_ops clk_rcg2_mux_closest_ops; + extern const struct clk_ops clk_edp_pixel_ops; + extern const struct clk_ops clk_byte_ops; + extern const struct clk_ops clk_byte2_ops; +--- a/drivers/clk/qcom/clk-rcg2.c ++++ b/drivers/clk/qcom/clk-rcg2.c +@@ -477,6 +477,13 @@ const struct clk_ops clk_rcg2_floor_ops + }; + EXPORT_SYMBOL_GPL(clk_rcg2_floor_ops); + ++const struct clk_ops clk_rcg2_mux_closest_ops = { ++ .determine_rate = __clk_mux_determine_rate_closest, ++ .get_parent = clk_rcg2_get_parent, ++ .set_parent = clk_rcg2_set_parent, ++}; ++EXPORT_SYMBOL_GPL(clk_rcg2_mux_closest_ops); ++ + struct frac_entry { + int num; + int den; diff --git a/target/linux/ipq807x/patches-5.15/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch b/target/linux/ipq807x/patches-5.15/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch new file mode 100644 index 0000000000..c279e2804e --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0039-v6.1-clk-qcom-apss-ipq6018-fix-apcs_alias0_clk_src.patch @@ -0,0 +1,63 @@ +From 6b9d5ecd2913758780a0529f9b95392f330b721b Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:06:21 +0200 +Subject: [PATCH] clk: qcom: apss-ipq6018: fix apcs_alias0_clk_src + +While working on IPQ8074 APSS driver it was discovered that IPQ6018 and +IPQ8074 use almost the same PLL and APSS clocks, however APSS driver is +currently broken. + +More precisely apcs_alias0_clk_src is broken, it was added as regmap_mux +clock. +However after debugging why it was always stuck at 800Mhz, it was figured +out that its not regmap_mux compatible at all. +It is a simple mux but it uses RCG2 register layout and control bits, so +utilize the new clk_rcg2_mux_closest_ops to correctly drive it while not +having to provide a dummy frequency table. + +While we are here, use ARRAY_SIZE for number of parents. + +Tested on IPQ6018-CP01-C1 reference board and multiple IPQ8074 boards. + +Fixes: 5e77b4ef1b19 ("clk: qcom: Add ipq6018 apss clock controller") +Signed-off-by: Robert Marko +Reviewed-by: Dmitry Baryshkov +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818220628.339366-2-robimarko@gmail.com +--- + drivers/clk/qcom/apss-ipq6018.c | 13 ++++++------- + 1 file changed, 6 insertions(+), 7 deletions(-) + +--- a/drivers/clk/qcom/apss-ipq6018.c ++++ b/drivers/clk/qcom/apss-ipq6018.c +@@ -16,7 +16,7 @@ + #include "clk-regmap.h" + #include "clk-branch.h" + #include "clk-alpha-pll.h" +-#include "clk-regmap-mux.h" ++#include "clk-rcg.h" + + enum { + P_XO, +@@ -33,16 +33,15 @@ static const struct parent_map parents_a + { P_APSS_PLL_EARLY, 5 }, + }; + +-static struct clk_regmap_mux apcs_alias0_clk_src = { +- .reg = 0x0050, +- .width = 3, +- .shift = 7, ++static struct clk_rcg2 apcs_alias0_clk_src = { ++ .cmd_rcgr = 0x0050, ++ .hid_width = 5, + .parent_map = parents_apcs_alias0_clk_src_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "apcs_alias0_clk_src", + .parent_data = parents_apcs_alias0_clk_src, +- .num_parents = 2, +- .ops = &clk_regmap_mux_closest_ops, ++ .num_parents = ARRAY_SIZE(parents_apcs_alias0_clk_src), ++ .ops = &clk_rcg2_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, + }; diff --git a/target/linux/ipq807x/patches-5.15/0040-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch b/target/linux/ipq807x/patches-5.15/0040-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch new file mode 100644 index 0000000000..ab9bd5f589 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0040-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch @@ -0,0 +1,32 @@ +From 6463c10bfdbd684ec7ecfd408ea541283215a088 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:06:28 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add A53 PLL node + +Add the required node for A53 PLL which will be used to provide the CPU +clock via APCS for APSS scaling. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818220628.339366-9-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -674,6 +674,14 @@ + #mbox-cells = <1>; + }; + ++ a53pll: clock@b116000 { ++ compatible = "qcom,ipq8074-a53pll"; ++ reg = <0x0b116000 0x40>; ++ #clock-cells = <0>; ++ clocks = <&xo>; ++ clock-names = "xo"; ++ }; ++ + timer@b120000 { + #address-cells = <1>; + #size-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch b/target/linux/ipq807x/patches-5.15/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch new file mode 100644 index 0000000000..f06e456a2c --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0041-v6.1-arm64-dts-qcom-ipq8074-correct-APCS-register-space-s.patch @@ -0,0 +1,32 @@ +From 23c5ff3143ce43a76eebdf60a93436de9db39a7a Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:06:27 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: correct APCS register space size + +APCS DTS addition that was merged, was not supposed to get merged as it +was part of patch series that was superseded by 2 more patch series +that resolved issues with this one and greatly simplified things. + +Since it already got merged, start by correcting the register space +size as APCS will not be providing regmap for PLL and it will conflict +with the standalone A53 PLL node. + +Fixes: 50ed9fffec3a ("arm64: dts: qcom: ipq8074: add APCS node") +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818220628.339366-8-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -668,7 +668,7 @@ + + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq8074-apcs-apps-global"; +- reg = <0x0b111000 0x6000>; ++ reg = <0x0b111000 0x1000>; + + #clock-cells = <1>; + #mbox-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0042-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch b/target/linux/ipq807x/patches-5.15/0042-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch new file mode 100644 index 0000000000..63b4cf176b --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0042-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch @@ -0,0 +1,134 @@ +From e593e834fe8ba9bf314d8215ac05d8787f81efda Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:02:42 +0200 +Subject: [PATCH] thermal/drivers/tsens: Add support for combined interrupt + +Despite using tsens v2.3 IP, IPQ8074 and IPQ6018 only have one IRQ for +signaling both up/low and critical trips. + +Signed-off-by: Robert Marko +Reviewed-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818220245.338396-2-robimarko@gmail.com +Signed-off-by: Daniel Lezcano +--- + drivers/thermal/qcom/tsens-8960.c | 1 + + drivers/thermal/qcom/tsens-v0_1.c | 1 + + drivers/thermal/qcom/tsens-v1.c | 1 + + drivers/thermal/qcom/tsens-v2.c | 1 + + drivers/thermal/qcom/tsens.c | 38 ++++++++++++++++++++++++++----- + drivers/thermal/qcom/tsens.h | 2 ++ + 6 files changed, 38 insertions(+), 6 deletions(-) + +--- a/drivers/thermal/qcom/tsens-8960.c ++++ b/drivers/thermal/qcom/tsens-8960.c +@@ -269,6 +269,7 @@ static const struct tsens_ops ops_8960 = + static struct tsens_features tsens_8960_feat = { + .ver_major = VER_0, + .crit_int = 0, ++ .combo_int = 0, + .adc = 1, + .srot_split = 0, + .max_sensors = 11, +--- a/drivers/thermal/qcom/tsens-v0_1.c ++++ b/drivers/thermal/qcom/tsens-v0_1.c +@@ -539,6 +539,7 @@ static int calibrate_9607(struct tsens_p + static struct tsens_features tsens_v0_1_feat = { + .ver_major = VER_0_1, + .crit_int = 0, ++ .combo_int = 0, + .adc = 1, + .srot_split = 1, + .max_sensors = 11, +--- a/drivers/thermal/qcom/tsens-v1.c ++++ b/drivers/thermal/qcom/tsens-v1.c +@@ -302,6 +302,7 @@ static int calibrate_8976(struct tsens_p + static struct tsens_features tsens_v1_feat = { + .ver_major = VER_1_X, + .crit_int = 0, ++ .combo_int = 0, + .adc = 1, + .srot_split = 1, + .max_sensors = 11, +--- a/drivers/thermal/qcom/tsens-v2.c ++++ b/drivers/thermal/qcom/tsens-v2.c +@@ -31,6 +31,7 @@ + static struct tsens_features tsens_v2_feat = { + .ver_major = VER_2_X, + .crit_int = 1, ++ .combo_int = 0, + .adc = 0, + .srot_split = 1, + .max_sensors = 16, +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -531,6 +531,27 @@ static irqreturn_t tsens_irq_thread(int + return IRQ_HANDLED; + } + ++/** ++ * tsens_combined_irq_thread() - Threaded interrupt handler for combined interrupts ++ * @irq: irq number ++ * @data: tsens controller private data ++ * ++ * Handle the combined interrupt as if it were 2 separate interrupts, so call the ++ * critical handler first and then the up/low one. ++ * ++ * Return: IRQ_HANDLED ++ */ ++static irqreturn_t tsens_combined_irq_thread(int irq, void *data) ++{ ++ irqreturn_t ret; ++ ++ ret = tsens_critical_irq_thread(irq, data); ++ if (ret != IRQ_HANDLED) ++ return ret; ++ ++ return tsens_irq_thread(irq, data); ++} ++ + static int tsens_set_trips(void *_sensor, int low, int high) + { + struct tsens_sensor *s = _sensor; +@@ -1075,13 +1096,18 @@ static int tsens_register(struct tsens_p + tsens_mC_to_hw(priv->sensor, 0)); + } + +- ret = tsens_register_irq(priv, "uplow", tsens_irq_thread); +- if (ret < 0) +- return ret; ++ if (priv->feat->combo_int) { ++ ret = tsens_register_irq(priv, "combined", ++ tsens_combined_irq_thread); ++ } else { ++ ret = tsens_register_irq(priv, "uplow", tsens_irq_thread); ++ if (ret < 0) ++ return ret; + +- if (priv->feat->crit_int) +- ret = tsens_register_irq(priv, "critical", +- tsens_critical_irq_thread); ++ if (priv->feat->crit_int) ++ ret = tsens_register_irq(priv, "critical", ++ tsens_critical_irq_thread); ++ } + + return ret; + } +--- a/drivers/thermal/qcom/tsens.h ++++ b/drivers/thermal/qcom/tsens.h +@@ -495,6 +495,7 @@ enum regfield_ids { + * struct tsens_features - Features supported by the IP + * @ver_major: Major number of IP version + * @crit_int: does the IP support critical interrupts? ++ * @combo_int: does the IP use one IRQ for up, low and critical thresholds? + * @adc: do the sensors only output adc code (instead of temperature)? + * @srot_split: does the IP neatly splits the register space into SROT and TM, + * with SROT only being available to secure boot firmware? +@@ -504,6 +505,7 @@ enum regfield_ids { + struct tsens_features { + unsigned int ver_major; + unsigned int crit_int:1; ++ unsigned int combo_int:1; + unsigned int adc:1; + unsigned int srot_split:1; + unsigned int has_watchdog:1; diff --git a/target/linux/ipq807x/patches-5.15/0043-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch b/target/linux/ipq807x/patches-5.15/0043-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch new file mode 100644 index 0000000000..7354d54464 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0043-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch @@ -0,0 +1,101 @@ +From 7805365fee582056b32c69cf35aafbb94b14a8ca Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:02:43 +0200 +Subject: [PATCH] thermal/drivers/tsens: Allow configuring min and max trips + +IPQ8074 and IPQ6018 dont support negative trip temperatures and support +up to 204 degrees C as the max trip temperature. + +So, instead of always setting the -40 as min and 120 degrees C as max +allow it to be configured as part of the features. + +Signed-off-by: Robert Marko +Reviewed-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818220245.338396-3-robimarko@gmail.com +Signed-off-by: Daniel Lezcano +--- + drivers/thermal/qcom/tsens-8960.c | 2 ++ + drivers/thermal/qcom/tsens-v0_1.c | 2 ++ + drivers/thermal/qcom/tsens-v1.c | 2 ++ + drivers/thermal/qcom/tsens-v2.c | 2 ++ + drivers/thermal/qcom/tsens.c | 4 ++-- + drivers/thermal/qcom/tsens.h | 4 ++++ + 6 files changed, 14 insertions(+), 2 deletions(-) + +--- a/drivers/thermal/qcom/tsens-8960.c ++++ b/drivers/thermal/qcom/tsens-8960.c +@@ -273,6 +273,8 @@ static struct tsens_features tsens_8960_ + .adc = 1, + .srot_split = 0, + .max_sensors = 11, ++ .trip_min_temp = -40000, ++ .trip_max_temp = 120000, + }; + + struct tsens_plat_data data_8960 = { +--- a/drivers/thermal/qcom/tsens-v0_1.c ++++ b/drivers/thermal/qcom/tsens-v0_1.c +@@ -543,6 +543,8 @@ static struct tsens_features tsens_v0_1_ + .adc = 1, + .srot_split = 1, + .max_sensors = 11, ++ .trip_min_temp = -40000, ++ .trip_max_temp = 120000, + }; + + static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = { +--- a/drivers/thermal/qcom/tsens-v1.c ++++ b/drivers/thermal/qcom/tsens-v1.c +@@ -306,6 +306,8 @@ static struct tsens_features tsens_v1_fe + .adc = 1, + .srot_split = 1, + .max_sensors = 11, ++ .trip_min_temp = -40000, ++ .trip_max_temp = 120000, + }; + + static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = { +--- a/drivers/thermal/qcom/tsens-v2.c ++++ b/drivers/thermal/qcom/tsens-v2.c +@@ -35,6 +35,8 @@ static struct tsens_features tsens_v2_fe + .adc = 0, + .srot_split = 1, + .max_sensors = 16, ++ .trip_min_temp = -40000, ++ .trip_max_temp = 120000, + }; + + static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -572,8 +572,8 @@ static int tsens_set_trips(void *_sensor + dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n", + hw_id, __func__, low, high); + +- cl_high = clamp_val(high, -40000, 120000); +- cl_low = clamp_val(low, -40000, 120000); ++ cl_high = clamp_val(high, priv->feat->trip_min_temp, priv->feat->trip_max_temp); ++ cl_low = clamp_val(low, priv->feat->trip_min_temp, priv->feat->trip_max_temp); + + high_val = tsens_mC_to_hw(s, cl_high); + low_val = tsens_mC_to_hw(s, cl_low); +--- a/drivers/thermal/qcom/tsens.h ++++ b/drivers/thermal/qcom/tsens.h +@@ -501,6 +501,8 @@ enum regfield_ids { + * with SROT only being available to secure boot firmware? + * @has_watchdog: does this IP support watchdog functionality? + * @max_sensors: maximum sensors supported by this version of the IP ++ * @trip_min_temp: minimum trip temperature supported by this version of the IP ++ * @trip_max_temp: maximum trip temperature supported by this version of the IP + */ + struct tsens_features { + unsigned int ver_major; +@@ -510,6 +512,8 @@ struct tsens_features { + unsigned int srot_split:1; + unsigned int has_watchdog:1; + unsigned int max_sensors; ++ int trip_min_temp; ++ int trip_max_temp; + }; + + /** diff --git a/target/linux/ipq807x/patches-5.15/0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch b/target/linux/ipq807x/patches-5.15/0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch new file mode 100644 index 0000000000..89e21c0194 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0044-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch @@ -0,0 +1,74 @@ +From 0164d794cbc58488a7321272e95958d10cf103a4 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:02:44 +0200 +Subject: [PATCH] thermal/drivers/tsens: Add IPQ8074 support + +Qualcomm IPQ8074 uses tsens v2.3 IP, however unlike other tsens v2 IP +it only has one IRQ, that is used for up/low as well as critical. +It also does not support negative trip temperatures. + +Signed-off-by: Robert Marko +Reviewed-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818220245.338396-4-robimarko@gmail.com +Signed-off-by: Daniel Lezcano +--- + drivers/thermal/qcom/tsens-v2.c | 17 +++++++++++++++++ + drivers/thermal/qcom/tsens.c | 3 +++ + drivers/thermal/qcom/tsens.h | 2 +- + 3 files changed, 21 insertions(+), 1 deletion(-) + +--- a/drivers/thermal/qcom/tsens-v2.c ++++ b/drivers/thermal/qcom/tsens-v2.c +@@ -39,6 +39,17 @@ static struct tsens_features tsens_v2_fe + .trip_max_temp = 120000, + }; + ++static struct tsens_features ipq8074_feat = { ++ .ver_major = VER_2_X, ++ .crit_int = 1, ++ .combo_int = 1, ++ .adc = 0, ++ .srot_split = 1, ++ .max_sensors = 16, ++ .trip_min_temp = 0, ++ .trip_max_temp = 204000, ++}; ++ + static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { + /* ----- SROT ------ */ + /* VERSION */ +@@ -104,6 +115,12 @@ struct tsens_plat_data data_tsens_v2 = { + .fields = tsens_v2_regfields, + }; + ++struct tsens_plat_data data_ipq8074 = { ++ .ops = &ops_generic_v2, ++ .feat = &ipq8074_feat, ++ .fields = tsens_v2_regfields, ++}; ++ + /* Kept around for backward compatibility with old msm8996.dtsi */ + struct tsens_plat_data data_8996 = { + .num_sensors = 13, +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -991,6 +991,9 @@ static const struct of_device_id tsens_t + .compatible = "qcom,ipq8064-tsens", + .data = &data_8960, + }, { ++ .compatible = "qcom,ipq8074-tsens", ++ .data = &data_ipq8074, ++ }, { + .compatible = "qcom,mdm9607-tsens", + .data = &data_9607, + }, { +--- a/drivers/thermal/qcom/tsens.h ++++ b/drivers/thermal/qcom/tsens.h +@@ -599,6 +599,6 @@ extern struct tsens_plat_data data_8916, + extern struct tsens_plat_data data_tsens_v1, data_8976; + + /* TSENS v2 targets */ +-extern struct tsens_plat_data data_8996, data_tsens_v2; ++extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2; + + #endif /* __QCOM_TSENS_H__ */ diff --git a/target/linux/ipq807x/patches-5.15/0045-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch b/target/linux/ipq807x/patches-5.15/0045-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch new file mode 100644 index 0000000000..c142acf63f --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0045-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch @@ -0,0 +1,130 @@ +From c3cc0c2a17f552be2426200e47a9e2c62cf449ce Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:02:45 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add thermal nodes + +IPQ8074 has a tsens v2.3.0 peripheral which monitors +temperatures around the various subsystems on the +die. + +So lets add the tsens and thermal zone nodes, passive +CPU cooling will come in later patches after CPU frequency +scaling is supported. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818220245.338396-5-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 96 +++++++++++++++++++++++++++ + 1 file changed, 96 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -273,6 +273,16 @@ + status = "disabled"; + }; + ++ tsens: thermal-sensor@4a9000 { ++ compatible = "qcom,ipq8074-tsens"; ++ reg = <0x4a9000 0x1000>, /* TM */ ++ <0x4a8000 0x1000>; /* SROT */ ++ interrupts = ; ++ interrupt-names = "combined"; ++ #qcom,sensors = <16>; ++ #thermal-sensor-cells = <1>; ++ }; ++ + cryptobam: dma-controller@704000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; +@@ -873,4 +883,90 @@ + , + ; + }; ++ ++ thermal-zones { ++ nss-top-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 4>; ++ }; ++ ++ nss0-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 5>; ++ }; ++ ++ nss1-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 6>; ++ }; ++ ++ wcss-phya0-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 7>; ++ }; ++ ++ wcss-phya1-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 8>; ++ }; ++ ++ cpu0_thermal: cpu0-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 9>; ++ }; ++ ++ cpu1_thermal: cpu1-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 10>; ++ }; ++ ++ cpu2_thermal: cpu2-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 11>; ++ }; ++ ++ cpu3_thermal: cpu3-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 12>; ++ }; ++ ++ cluster_thermal: cluster-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 13>; ++ }; ++ ++ wcss-phyb0-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 14>; ++ }; ++ ++ wcss-phyb1-thermal { ++ polling-delay-passive = <250>; ++ polling-delay = <1000>; ++ ++ thermal-sensors = <&tsens 15>; ++ }; ++ }; + }; diff --git a/target/linux/ipq807x/patches-5.15/0046-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch b/target/linux/ipq807x/patches-5.15/0046-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch new file mode 100644 index 0000000000..ff992378a2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0046-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch @@ -0,0 +1,29 @@ +From 0df592a0a1a3fff9133977192677aa915afc174f Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:08:49 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add clocks to APCS + +APCS now has support for providing the APSS clocks as the child device +for IPQ8074. + +So, add the A53 PLL and XO clocks in order to use APCS as the CPU +clocksource for APSS scaling. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818220849.339732-4-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -679,6 +679,8 @@ + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq8074-apcs-apps-global"; + reg = <0x0b111000 0x1000>; ++ clocks = <&a53pll>, <&xo>; ++ clock-names = "pll", "xo"; + + #clock-cells = <1>; + #mbox-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0047-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch b/target/linux/ipq807x/patches-5.15/0047-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch new file mode 100644 index 0000000000..9162ea538d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0047-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch @@ -0,0 +1,3601 @@ +From e6c5115d6845f25eda7e162dcd783a2044215867 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sun, 30 Oct 2022 18:57:01 +0100 +Subject: [PATCH] clk: qcom: ipq8074: convert to parent data + +Convert the IPQ8074 GCC driver to use parent data instead of global +name matching. + +Utilize ARRAY_SIZE for num_parents instead of hardcoding the value. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221030175703.1103224-1-robimarko@gmail.com +--- + drivers/clk/qcom/gcc-ipq8074.c | 1781 +++++++++++++++----------------- + 1 file changed, 813 insertions(+), 968 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -49,349 +49,6 @@ enum { + P_UNIPHY2_TX, + }; + +-static const char * const gcc_xo_gpll0_gpll0_out_main_div2[] = { +- "xo", +- "gpll0", +- "gpll0_out_main_div2", +-}; +- +-static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +- { P_GPLL0_DIV2, 4 }, +-}; +- +-static const struct parent_map gcc_xo_gpll0_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +-}; +- +-static const char * const gcc_xo_gpll0_gpll2_gpll0_out_main_div2[] = { +- "xo", +- "gpll0", +- "gpll2", +- "gpll0_out_main_div2", +-}; +- +-static const struct parent_map gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +- { P_GPLL2, 2 }, +- { P_GPLL0_DIV2, 4 }, +-}; +- +-static const char * const gcc_xo_gpll0_sleep_clk[] = { +- "xo", +- "gpll0", +- "sleep_clk", +-}; +- +-static const struct parent_map gcc_xo_gpll0_sleep_clk_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 2 }, +- { P_SLEEP_CLK, 6 }, +-}; +- +-static const char * const gcc_xo_gpll6_gpll0_gpll0_out_main_div2[] = { +- "xo", +- "gpll6", +- "gpll0", +- "gpll0_out_main_div2", +-}; +- +-static const struct parent_map gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map[] = { +- { P_XO, 0 }, +- { P_GPLL6, 1 }, +- { P_GPLL0, 3 }, +- { P_GPLL0_DIV2, 4 }, +-}; +- +-static const char * const gcc_xo_gpll0_out_main_div2_gpll0[] = { +- "xo", +- "gpll0_out_main_div2", +- "gpll0", +-}; +- +-static const struct parent_map gcc_xo_gpll0_out_main_div2_gpll0_map[] = { +- { P_XO, 0 }, +- { P_GPLL0_DIV2, 2 }, +- { P_GPLL0, 1 }, +-}; +- +-static const char * const gcc_usb3phy_0_cc_pipe_clk_xo[] = { +- "usb3phy_0_cc_pipe_clk", +- "xo", +-}; +- +-static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = { +- { P_USB3PHY_0_PIPE, 0 }, +- { P_XO, 2 }, +-}; +- +-static const char * const gcc_usb3phy_1_cc_pipe_clk_xo[] = { +- "usb3phy_1_cc_pipe_clk", +- "xo", +-}; +- +-static const struct parent_map gcc_usb3phy_1_cc_pipe_clk_xo_map[] = { +- { P_USB3PHY_1_PIPE, 0 }, +- { P_XO, 2 }, +-}; +- +-static const char * const gcc_pcie20_phy0_pipe_clk_xo[] = { +- "pcie20_phy0_pipe_clk", +- "xo", +-}; +- +-static const struct parent_map gcc_pcie20_phy0_pipe_clk_xo_map[] = { +- { P_PCIE20_PHY0_PIPE, 0 }, +- { P_XO, 2 }, +-}; +- +-static const char * const gcc_pcie20_phy1_pipe_clk_xo[] = { +- "pcie20_phy1_pipe_clk", +- "xo", +-}; +- +-static const struct parent_map gcc_pcie20_phy1_pipe_clk_xo_map[] = { +- { P_PCIE20_PHY1_PIPE, 0 }, +- { P_XO, 2 }, +-}; +- +-static const char * const gcc_xo_gpll0_gpll6_gpll0_div2[] = { +- "xo", +- "gpll0", +- "gpll6", +- "gpll0_out_main_div2", +-}; +- +-static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_div2_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +- { P_GPLL6, 2 }, +- { P_GPLL0_DIV2, 4 }, +-}; +- +-static const char * const gcc_xo_gpll0_gpll6_gpll0_out_main_div2[] = { +- "xo", +- "gpll0", +- "gpll6", +- "gpll0_out_main_div2", +-}; +- +-static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_out_main_div2_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +- { P_GPLL6, 2 }, +- { P_GPLL0_DIV2, 3 }, +-}; +- +-static const char * const gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2[] = { +- "xo", +- "bias_pll_nss_noc_clk", +- "gpll0", +- "gpll2", +-}; +- +-static const struct parent_map gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2_map[] = { +- { P_XO, 0 }, +- { P_BIAS_PLL_NSS_NOC, 1 }, +- { P_GPLL0, 2 }, +- { P_GPLL2, 3 }, +-}; +- +-static const char * const gcc_xo_nss_crypto_pll_gpll0[] = { +- "xo", +- "nss_crypto_pll", +- "gpll0", +-}; +- +-static const struct parent_map gcc_xo_nss_crypto_pll_gpll0_map[] = { +- { P_XO, 0 }, +- { P_NSS_CRYPTO_PLL, 1 }, +- { P_GPLL0, 2 }, +-}; +- +-static const char * const gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6[] = { +- "xo", +- "ubi32_pll", +- "gpll0", +- "gpll2", +- "gpll4", +- "gpll6", +-}; +- +-static const struct parent_map gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map[] = { +- { P_XO, 0 }, +- { P_UBI32_PLL, 1 }, +- { P_GPLL0, 2 }, +- { P_GPLL2, 3 }, +- { P_GPLL4, 4 }, +- { P_GPLL6, 5 }, +-}; +- +-static const char * const gcc_xo_gpll0_out_main_div2[] = { +- "xo", +- "gpll0_out_main_div2", +-}; +- +-static const struct parent_map gcc_xo_gpll0_out_main_div2_map[] = { +- { P_XO, 0 }, +- { P_GPLL0_DIV2, 1 }, +-}; +- +-static const char * const gcc_xo_bias_gpll0_gpll4_nss_ubi32[] = { +- "xo", +- "bias_pll_cc_clk", +- "gpll0", +- "gpll4", +- "nss_crypto_pll", +- "ubi32_pll", +-}; +- +-static const struct parent_map gcc_xo_bias_gpll0_gpll4_nss_ubi32_map[] = { +- { P_XO, 0 }, +- { P_BIAS_PLL, 1 }, +- { P_GPLL0, 2 }, +- { P_GPLL4, 3 }, +- { P_NSS_CRYPTO_PLL, 4 }, +- { P_UBI32_PLL, 5 }, +-}; +- +-static const char * const gcc_xo_gpll0_gpll4[] = { +- "xo", +- "gpll0", +- "gpll4", +-}; +- +-static const struct parent_map gcc_xo_gpll0_gpll4_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +- { P_GPLL4, 2 }, +-}; +- +-static const char * const gcc_xo_uniphy0_rx_tx_ubi32_bias[] = { +- "xo", +- "uniphy0_gcc_rx_clk", +- "uniphy0_gcc_tx_clk", +- "ubi32_pll", +- "bias_pll_cc_clk", +-}; +- +-static const struct parent_map gcc_xo_uniphy0_rx_tx_ubi32_bias_map[] = { +- { P_XO, 0 }, +- { P_UNIPHY0_RX, 1 }, +- { P_UNIPHY0_TX, 2 }, +- { P_UBI32_PLL, 5 }, +- { P_BIAS_PLL, 6 }, +-}; +- +-static const char * const gcc_xo_uniphy0_tx_rx_ubi32_bias[] = { +- "xo", +- "uniphy0_gcc_tx_clk", +- "uniphy0_gcc_rx_clk", +- "ubi32_pll", +- "bias_pll_cc_clk", +-}; +- +-static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = { +- { P_XO, 0 }, +- { P_UNIPHY0_TX, 1 }, +- { P_UNIPHY0_RX, 2 }, +- { P_UBI32_PLL, 5 }, +- { P_BIAS_PLL, 6 }, +-}; +- +-static const char * const gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias[] = { +- "xo", +- "uniphy0_gcc_rx_clk", +- "uniphy0_gcc_tx_clk", +- "uniphy1_gcc_rx_clk", +- "uniphy1_gcc_tx_clk", +- "ubi32_pll", +- "bias_pll_cc_clk", +-}; +- +-static const struct parent_map +-gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias_map[] = { +- { P_XO, 0 }, +- { P_UNIPHY0_RX, 1 }, +- { P_UNIPHY0_TX, 2 }, +- { P_UNIPHY1_RX, 3 }, +- { P_UNIPHY1_TX, 4 }, +- { P_UBI32_PLL, 5 }, +- { P_BIAS_PLL, 6 }, +-}; +- +-static const char * const gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias[] = { +- "xo", +- "uniphy0_gcc_tx_clk", +- "uniphy0_gcc_rx_clk", +- "uniphy1_gcc_tx_clk", +- "uniphy1_gcc_rx_clk", +- "ubi32_pll", +- "bias_pll_cc_clk", +-}; +- +-static const struct parent_map +-gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias_map[] = { +- { P_XO, 0 }, +- { P_UNIPHY0_TX, 1 }, +- { P_UNIPHY0_RX, 2 }, +- { P_UNIPHY1_TX, 3 }, +- { P_UNIPHY1_RX, 4 }, +- { P_UBI32_PLL, 5 }, +- { P_BIAS_PLL, 6 }, +-}; +- +-static const char * const gcc_xo_uniphy2_rx_tx_ubi32_bias[] = { +- "xo", +- "uniphy2_gcc_rx_clk", +- "uniphy2_gcc_tx_clk", +- "ubi32_pll", +- "bias_pll_cc_clk", +-}; +- +-static const struct parent_map gcc_xo_uniphy2_rx_tx_ubi32_bias_map[] = { +- { P_XO, 0 }, +- { P_UNIPHY2_RX, 1 }, +- { P_UNIPHY2_TX, 2 }, +- { P_UBI32_PLL, 5 }, +- { P_BIAS_PLL, 6 }, +-}; +- +-static const char * const gcc_xo_uniphy2_tx_rx_ubi32_bias[] = { +- "xo", +- "uniphy2_gcc_tx_clk", +- "uniphy2_gcc_rx_clk", +- "ubi32_pll", +- "bias_pll_cc_clk", +-}; +- +-static const struct parent_map gcc_xo_uniphy2_tx_rx_ubi32_bias_map[] = { +- { P_XO, 0 }, +- { P_UNIPHY2_TX, 1 }, +- { P_UNIPHY2_RX, 2 }, +- { P_UBI32_PLL, 5 }, +- { P_BIAS_PLL, 6 }, +-}; +- +-static const char * const gcc_xo_gpll0_gpll6_gpll0_sleep_clk[] = { +- "xo", +- "gpll0", +- "gpll6", +- "gpll0_out_main_div2", +- "sleep_clk", +-}; +- +-static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map[] = { +- { P_XO, 0 }, +- { P_GPLL0, 1 }, +- { P_GPLL6, 2 }, +- { P_GPLL0_DIV2, 4 }, +- { P_SLEEP_CLK, 6 }, +-}; +- + static struct clk_alpha_pll gpll0_main = { + .offset = 0x21000, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], +@@ -400,8 +57,9 @@ static struct clk_alpha_pll gpll0_main = + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gpll0_main", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_ops, +@@ -414,9 +72,8 @@ static struct clk_fixed_factor gpll0_out + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "gpll0_out_main_div2", +- .parent_names = (const char *[]){ +- "gpll0_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gpll0_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -429,9 +86,8 @@ static struct clk_alpha_pll_postdiv gpll + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll0", +- .parent_names = (const char *[]){ +- "gpll0_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gpll0_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + }, +@@ -445,8 +101,9 @@ static struct clk_alpha_pll gpll2_main = + .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data){ + .name = "gpll2_main", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_ops, +@@ -461,9 +118,8 @@ static struct clk_alpha_pll_postdiv gpll + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll2", +- .parent_names = (const char *[]){ +- "gpll2_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gpll2_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -478,8 +134,9 @@ static struct clk_alpha_pll gpll4_main = + .enable_mask = BIT(5), + .hw.init = &(struct clk_init_data){ + .name = "gpll4_main", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_ops, +@@ -494,9 +151,8 @@ static struct clk_alpha_pll_postdiv gpll + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll4", +- .parent_names = (const char *[]){ +- "gpll4_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gpll4_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -512,8 +168,9 @@ static struct clk_alpha_pll gpll6_main = + .enable_mask = BIT(7), + .hw.init = &(struct clk_init_data){ + .name = "gpll6_main", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_ops, +@@ -528,9 +185,8 @@ static struct clk_alpha_pll_postdiv gpll + .width = 2, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll6", +- .parent_names = (const char *[]){ +- "gpll6_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gpll6_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -542,9 +198,8 @@ static struct clk_fixed_factor gpll6_out + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "gpll6_out_main_div2", +- .parent_names = (const char *[]){ +- "gpll6_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gpll6_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -560,8 +215,9 @@ static struct clk_alpha_pll ubi32_pll_ma + .enable_mask = BIT(6), + .hw.init = &(struct clk_init_data){ + .name = "ubi32_pll_main", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_huayra_ops, +@@ -575,9 +231,8 @@ static struct clk_alpha_pll_postdiv ubi3 + .width = 2, + .clkr.hw.init = &(struct clk_init_data){ + .name = "ubi32_pll", +- .parent_names = (const char *[]){ +- "ubi32_pll_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &ubi32_pll_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -592,8 +247,9 @@ static struct clk_alpha_pll nss_crypto_p + .enable_mask = BIT(4), + .hw.init = &(struct clk_init_data){ + .name = "nss_crypto_pll_main", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_ops, +@@ -607,9 +263,8 @@ static struct clk_alpha_pll_postdiv nss_ + .width = 4, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_crypto_pll", +- .parent_names = (const char *[]){ +- "nss_crypto_pll_main" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_crypto_pll_main.clkr.hw }, + .num_parents = 1, + .ops = &clk_alpha_pll_postdiv_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -623,6 +278,18 @@ static const struct freq_tbl ftbl_pcnoc_ + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw}, ++ { .hw = &gpll0_out_main_div2.hw}, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++ { P_GPLL0_DIV2, 4 }, ++}; ++ + static struct clk_rcg2 pcnoc_bfdcd_clk_src = { + .cmd_rcgr = 0x27000, + .freq_tbl = ftbl_pcnoc_bfdcd_clk_src, +@@ -630,8 +297,8 @@ static struct clk_rcg2 pcnoc_bfdcd_clk_s + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcnoc_bfdcd_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + .flags = CLK_IS_CRITICAL, + }, +@@ -642,9 +309,8 @@ static struct clk_fixed_factor pcnoc_clk + .div = 1, + .hw.init = &(struct clk_init_data){ + .name = "pcnoc_clk_src", +- .parent_names = (const char *[]){ +- "pcnoc_bfdcd_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -658,8 +324,9 @@ static struct clk_branch gcc_sleep_clk_s + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sleep_clk_src", +- .parent_names = (const char *[]){ +- "sleep_clk" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "sleep_clk", ++ .name = "sleep_clk", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, +@@ -682,8 +349,8 @@ static struct clk_rcg2 blsp1_qup1_i2c_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup1_i2c_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -708,8 +375,8 @@ static struct clk_rcg2 blsp1_qup1_spi_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup1_spi_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -721,8 +388,8 @@ static struct clk_rcg2 blsp1_qup2_i2c_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup2_i2c_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -735,8 +402,8 @@ static struct clk_rcg2 blsp1_qup2_spi_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup2_spi_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -748,8 +415,8 @@ static struct clk_rcg2 blsp1_qup3_i2c_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup3_i2c_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -762,8 +429,8 @@ static struct clk_rcg2 blsp1_qup3_spi_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup3_spi_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -775,8 +442,8 @@ static struct clk_rcg2 blsp1_qup4_i2c_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup4_i2c_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -789,8 +456,8 @@ static struct clk_rcg2 blsp1_qup4_spi_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup4_spi_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -802,8 +469,8 @@ static struct clk_rcg2 blsp1_qup5_i2c_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup5_i2c_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -816,8 +483,8 @@ static struct clk_rcg2 blsp1_qup5_spi_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup5_spi_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -829,8 +496,8 @@ static struct clk_rcg2 blsp1_qup6_i2c_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup6_i2c_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -843,8 +510,8 @@ static struct clk_rcg2 blsp1_qup6_spi_ap + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup6_spi_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -877,8 +544,8 @@ static struct clk_rcg2 blsp1_uart1_apps_ + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart1_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -891,8 +558,8 @@ static struct clk_rcg2 blsp1_uart2_apps_ + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart2_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -905,8 +572,8 @@ static struct clk_rcg2 blsp1_uart3_apps_ + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart3_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -919,8 +586,8 @@ static struct clk_rcg2 blsp1_uart4_apps_ + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart4_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -933,8 +600,8 @@ static struct clk_rcg2 blsp1_uart5_apps_ + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart5_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -947,8 +614,8 @@ static struct clk_rcg2 blsp1_uart6_apps_ + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart6_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -958,6 +625,11 @@ static const struct clk_parent_data gcc_ + { .hw = &gpll0.clkr.hw }, + }; + ++static const struct parent_map gcc_xo_gpll0_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++}; ++ + static const struct freq_tbl ftbl_pcie_axi_clk_src[] = { + F(19200000, P_XO, 1, 0, 0), + F(200000000, P_GPLL0, 4, 0, 0), +@@ -972,7 +644,7 @@ static struct clk_rcg2 pcie0_axi_clk_src + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie0_axi_clk_src", + .parent_data = gcc_xo_gpll0, +- .num_parents = 2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, + }; +@@ -981,6 +653,18 @@ static const struct freq_tbl ftbl_pcie_a + F(19200000, P_XO, 1, 0, 0), + }; + ++static const struct clk_parent_data gcc_xo_gpll0_sleep_clk[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .fw_name = "sleep_clk", .name = "sleep_clk" }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_sleep_clk_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 2 }, ++ { P_SLEEP_CLK, 6 }, ++}; ++ + static struct clk_rcg2 pcie0_aux_clk_src = { + .cmd_rcgr = 0x75024, + .freq_tbl = ftbl_pcie_aux_clk_src, +@@ -989,12 +673,22 @@ static struct clk_rcg2 pcie0_aux_clk_src + .parent_map = gcc_xo_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie0_aux_clk_src", +- .parent_names = gcc_xo_gpll0_sleep_clk, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; + ++static const struct clk_parent_data gcc_pcie20_phy0_pipe_clk_xo[] = { ++ { .name = "pcie20_phy0_pipe_clk" }, ++ { .fw_name = "xo", .name = "xo" }, ++}; ++ ++static const struct parent_map gcc_pcie20_phy0_pipe_clk_xo_map[] = { ++ { P_PCIE20_PHY0_PIPE, 0 }, ++ { P_XO, 2 }, ++}; ++ + static struct clk_regmap_mux pcie0_pipe_clk_src = { + .reg = 0x7501c, + .shift = 8, +@@ -1003,8 +697,8 @@ static struct clk_regmap_mux pcie0_pipe_ + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "pcie0_pipe_clk_src", +- .parent_names = gcc_pcie20_phy0_pipe_clk_xo, +- .num_parents = 2, ++ .parent_data = gcc_pcie20_phy0_pipe_clk_xo, ++ .num_parents = ARRAY_SIZE(gcc_pcie20_phy0_pipe_clk_xo), + .ops = &clk_regmap_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, +@@ -1019,7 +713,7 @@ static struct clk_rcg2 pcie1_axi_clk_src + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie1_axi_clk_src", + .parent_data = gcc_xo_gpll0, +- .num_parents = 2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1032,12 +726,22 @@ static struct clk_rcg2 pcie1_aux_clk_src + .parent_map = gcc_xo_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie1_aux_clk_src", +- .parent_names = gcc_xo_gpll0_sleep_clk, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; + ++static const struct clk_parent_data gcc_pcie20_phy1_pipe_clk_xo[] = { ++ { .name = "pcie20_phy1_pipe_clk" }, ++ { .fw_name = "xo", .name = "xo" }, ++}; ++ ++static const struct parent_map gcc_pcie20_phy1_pipe_clk_xo_map[] = { ++ { P_PCIE20_PHY1_PIPE, 0 }, ++ { P_XO, 2 }, ++}; ++ + static struct clk_regmap_mux pcie1_pipe_clk_src = { + .reg = 0x7601c, + .shift = 8, +@@ -1046,8 +750,8 @@ static struct clk_regmap_mux pcie1_pipe_ + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "pcie1_pipe_clk_src", +- .parent_names = gcc_pcie20_phy1_pipe_clk_xo, +- .num_parents = 2, ++ .parent_data = gcc_pcie20_phy1_pipe_clk_xo, ++ .num_parents = ARRAY_SIZE(gcc_pcie20_phy1_pipe_clk_xo), + .ops = &clk_regmap_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, +@@ -1066,6 +770,20 @@ static const struct freq_tbl ftbl_sdcc_a + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_gpll2_gpll0_out_main_div2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll2.clkr.hw }, ++ { .hw = &gpll0_out_main_div2.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++ { P_GPLL2, 2 }, ++ { P_GPLL0_DIV2, 4 }, ++}; ++ + static struct clk_rcg2 sdcc1_apps_clk_src = { + .cmd_rcgr = 0x42004, + .freq_tbl = ftbl_sdcc_apps_clk_src, +@@ -1074,8 +792,8 @@ static struct clk_rcg2 sdcc1_apps_clk_sr + .parent_map = gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "sdcc1_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, +- .num_parents = 4, ++ .parent_data = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll2_gpll0_out_main_div2), + .ops = &clk_rcg2_floor_ops, + }, + }; +@@ -1086,6 +804,20 @@ static const struct freq_tbl ftbl_sdcc_i + F(308570000, P_GPLL6, 3.5, 0, 0), + }; + ++static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_div2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll6.clkr.hw }, ++ { .hw = &gpll0_out_main_div2.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_div2_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++ { P_GPLL6, 2 }, ++ { P_GPLL0_DIV2, 4 }, ++}; ++ + static struct clk_rcg2 sdcc1_ice_core_clk_src = { + .cmd_rcgr = 0x5d000, + .freq_tbl = ftbl_sdcc_ice_core_clk_src, +@@ -1094,8 +826,8 @@ static struct clk_rcg2 sdcc1_ice_core_cl + .parent_map = gcc_xo_gpll0_gpll6_gpll0_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "sdcc1_ice_core_clk_src", +- .parent_names = gcc_xo_gpll0_gpll6_gpll0_div2, +- .num_parents = 4, ++ .parent_data = gcc_xo_gpll0_gpll6_gpll0_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1108,8 +840,8 @@ static struct clk_rcg2 sdcc2_apps_clk_sr + .parent_map = gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "sdcc2_apps_clk_src", +- .parent_names = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, +- .num_parents = 4, ++ .parent_data = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll2_gpll0_out_main_div2), + .ops = &clk_rcg2_floor_ops, + }, + }; +@@ -1121,6 +853,18 @@ static const struct freq_tbl ftbl_usb_ma + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_out_main_div2_gpll0[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0_out_main_div2.hw }, ++ { .hw = &gpll0.clkr.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_out_main_div2_gpll0_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0_DIV2, 2 }, ++ { P_GPLL0, 1 }, ++}; ++ + static struct clk_rcg2 usb0_master_clk_src = { + .cmd_rcgr = 0x3e00c, + .freq_tbl = ftbl_usb_master_clk_src, +@@ -1129,8 +873,8 @@ static struct clk_rcg2 usb0_master_clk_s + .parent_map = gcc_xo_gpll0_out_main_div2_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb0_master_clk_src", +- .parent_names = gcc_xo_gpll0_out_main_div2_gpll0, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_out_main_div2_gpll0, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_out_main_div2_gpll0), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1148,8 +892,8 @@ static struct clk_rcg2 usb0_aux_clk_src + .parent_map = gcc_xo_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb0_aux_clk_src", +- .parent_names = gcc_xo_gpll0_sleep_clk, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1161,6 +905,20 @@ static const struct freq_tbl ftbl_usb_mo + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll6_gpll0_gpll0_out_main_div2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll6.clkr.hw }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll0_out_main_div2.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL6, 1 }, ++ { P_GPLL0, 3 }, ++ { P_GPLL0_DIV2, 4 }, ++}; ++ + static struct clk_rcg2 usb0_mock_utmi_clk_src = { + .cmd_rcgr = 0x3e020, + .freq_tbl = ftbl_usb_mock_utmi_clk_src, +@@ -1169,12 +927,22 @@ static struct clk_rcg2 usb0_mock_utmi_cl + .parent_map = gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb0_mock_utmi_clk_src", +- .parent_names = gcc_xo_gpll6_gpll0_gpll0_out_main_div2, +- .num_parents = 4, ++ .parent_data = gcc_xo_gpll6_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll6_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; + ++static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = { ++ { .name = "usb3phy_0_cc_pipe_clk" }, ++ { .fw_name = "xo", .name = "xo" }, ++}; ++ ++static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = { ++ { P_USB3PHY_0_PIPE, 0 }, ++ { P_XO, 2 }, ++}; ++ + static struct clk_regmap_mux usb0_pipe_clk_src = { + .reg = 0x3e048, + .shift = 8, +@@ -1183,8 +951,8 @@ static struct clk_regmap_mux usb0_pipe_c + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "usb0_pipe_clk_src", +- .parent_names = gcc_usb3phy_0_cc_pipe_clk_xo, +- .num_parents = 2, ++ .parent_data = gcc_usb3phy_0_cc_pipe_clk_xo, ++ .num_parents = ARRAY_SIZE(gcc_usb3phy_0_cc_pipe_clk_xo), + .ops = &clk_regmap_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, +@@ -1199,8 +967,8 @@ static struct clk_rcg2 usb1_master_clk_s + .parent_map = gcc_xo_gpll0_out_main_div2_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb1_master_clk_src", +- .parent_names = gcc_xo_gpll0_out_main_div2_gpll0, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_out_main_div2_gpll0, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_out_main_div2_gpll0), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1213,8 +981,8 @@ static struct clk_rcg2 usb1_aux_clk_src + .parent_map = gcc_xo_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb1_aux_clk_src", +- .parent_names = gcc_xo_gpll0_sleep_clk, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1227,12 +995,22 @@ static struct clk_rcg2 usb1_mock_utmi_cl + .parent_map = gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb1_mock_utmi_clk_src", +- .parent_names = gcc_xo_gpll6_gpll0_gpll0_out_main_div2, +- .num_parents = 4, ++ .parent_data = gcc_xo_gpll6_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll6_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; + ++static const struct clk_parent_data gcc_usb3phy_1_cc_pipe_clk_xo[] = { ++ { .name = "usb3phy_1_cc_pipe_clk" }, ++ { .fw_name = "xo", .name = "xo" }, ++}; ++ ++static const struct parent_map gcc_usb3phy_1_cc_pipe_clk_xo_map[] = { ++ { P_USB3PHY_1_PIPE, 0 }, ++ { P_XO, 2 }, ++}; ++ + static struct clk_regmap_mux usb1_pipe_clk_src = { + .reg = 0x3f048, + .shift = 8, +@@ -1241,8 +1019,8 @@ static struct clk_regmap_mux usb1_pipe_c + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "usb1_pipe_clk_src", +- .parent_names = gcc_usb3phy_1_cc_pipe_clk_xo, +- .num_parents = 2, ++ .parent_data = gcc_usb3phy_1_cc_pipe_clk_xo, ++ .num_parents = ARRAY_SIZE(gcc_usb3phy_1_cc_pipe_clk_xo), + .ops = &clk_regmap_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, +@@ -1256,8 +1034,9 @@ static struct clk_branch gcc_xo_clk_src + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_xo_clk_src", +- .parent_names = (const char *[]){ +- "xo" ++ .parent_data = &(const struct clk_parent_data){ ++ .fw_name = "xo", ++ .name = "xo", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, +@@ -1271,9 +1050,8 @@ static struct clk_fixed_factor gcc_xo_di + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "gcc_xo_div4_clk_src", +- .parent_names = (const char *[]){ +- "gcc_xo_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1291,6 +1069,20 @@ static const struct freq_tbl ftbl_system + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_out_main_div2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll6.clkr.hw }, ++ { .hw = &gpll0_out_main_div2.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_out_main_div2_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++ { P_GPLL6, 2 }, ++ { P_GPLL0_DIV2, 3 }, ++}; ++ + static struct clk_rcg2 system_noc_bfdcd_clk_src = { + .cmd_rcgr = 0x26004, + .freq_tbl = ftbl_system_noc_bfdcd_clk_src, +@@ -1298,8 +1090,8 @@ static struct clk_rcg2 system_noc_bfdcd_ + .parent_map = gcc_xo_gpll0_gpll6_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "system_noc_bfdcd_clk_src", +- .parent_names = gcc_xo_gpll0_gpll6_gpll0_out_main_div2, +- .num_parents = 4, ++ .parent_data = gcc_xo_gpll0_gpll6_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + .flags = CLK_IS_CRITICAL, + }, +@@ -1310,9 +1102,8 @@ static struct clk_fixed_factor system_no + .div = 1, + .hw.init = &(struct clk_init_data){ + .name = "system_noc_clk_src", +- .parent_names = (const char *[]){ +- "system_noc_bfdcd_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &system_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1333,7 +1124,7 @@ static struct clk_rcg2 nss_ce_clk_src = + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_ce_clk_src", + .parent_data = gcc_xo_gpll0, +- .num_parents = 2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1344,6 +1135,20 @@ static const struct freq_tbl ftbl_nss_no + { } + }; + ++static const struct clk_parent_data gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "bias_pll_nss_noc_clk" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll2.clkr.hw }, ++}; ++ ++static const struct parent_map gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2_map[] = { ++ { P_XO, 0 }, ++ { P_BIAS_PLL_NSS_NOC, 1 }, ++ { P_GPLL0, 2 }, ++ { P_GPLL2, 3 }, ++}; ++ + static struct clk_rcg2 nss_noc_bfdcd_clk_src = { + .cmd_rcgr = 0x68088, + .freq_tbl = ftbl_nss_noc_bfdcd_clk_src, +@@ -1351,8 +1156,8 @@ static struct clk_rcg2 nss_noc_bfdcd_clk + .parent_map = gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_noc_bfdcd_clk_src", +- .parent_names = gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2, +- .num_parents = 4, ++ .parent_data = gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2, ++ .num_parents = ARRAY_SIZE(gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1362,9 +1167,8 @@ static struct clk_fixed_factor nss_noc_c + .div = 1, + .hw.init = &(struct clk_init_data){ + .name = "nss_noc_clk_src", +- .parent_names = (const char *[]){ +- "nss_noc_bfdcd_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_bfdcd_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1377,6 +1181,18 @@ static const struct freq_tbl ftbl_nss_cr + { } + }; + ++static const struct clk_parent_data gcc_xo_nss_crypto_pll_gpll0[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &nss_crypto_pll.clkr.hw }, ++ { .hw = &gpll0.clkr.hw }, ++}; ++ ++static const struct parent_map gcc_xo_nss_crypto_pll_gpll0_map[] = { ++ { P_XO, 0 }, ++ { P_NSS_CRYPTO_PLL, 1 }, ++ { P_GPLL0, 2 }, ++}; ++ + static struct clk_rcg2 nss_crypto_clk_src = { + .cmd_rcgr = 0x68144, + .freq_tbl = ftbl_nss_crypto_clk_src, +@@ -1385,8 +1201,8 @@ static struct clk_rcg2 nss_crypto_clk_sr + .parent_map = gcc_xo_nss_crypto_pll_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_crypto_clk_src", +- .parent_names = gcc_xo_nss_crypto_pll_gpll0, +- .num_parents = 3, ++ .parent_data = gcc_xo_nss_crypto_pll_gpll0, ++ .num_parents = ARRAY_SIZE(gcc_xo_nss_crypto_pll_gpll0), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1400,6 +1216,24 @@ static const struct freq_tbl ftbl_nss_ub + { } + }; + ++static const struct clk_parent_data gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll2.clkr.hw }, ++ { .hw = &gpll4.clkr.hw }, ++ { .hw = &gpll6.clkr.hw }, ++}; ++ ++static const struct parent_map gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map[] = { ++ { P_XO, 0 }, ++ { P_UBI32_PLL, 1 }, ++ { P_GPLL0, 2 }, ++ { P_GPLL2, 3 }, ++ { P_GPLL4, 4 }, ++ { P_GPLL6, 5 }, ++}; ++ + static struct clk_rcg2 nss_ubi0_clk_src = { + .cmd_rcgr = 0x68104, + .freq_tbl = ftbl_nss_ubi_clk_src, +@@ -1407,8 +1241,8 @@ static struct clk_rcg2 nss_ubi0_clk_src + .parent_map = gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_ubi0_clk_src", +- .parent_names = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6, +- .num_parents = 6, ++ .parent_data = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6, ++ .num_parents = ARRAY_SIZE(gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6), + .ops = &clk_rcg2_ops, + .flags = CLK_SET_RATE_PARENT, + }, +@@ -1421,9 +1255,8 @@ static struct clk_regmap_div nss_ubi0_di + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_ubi0_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_ubi0_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ubi0_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1438,8 +1271,8 @@ static struct clk_rcg2 nss_ubi1_clk_src + .parent_map = gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_ubi1_clk_src", +- .parent_names = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6, +- .num_parents = 6, ++ .parent_data = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6, ++ .num_parents = ARRAY_SIZE(gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6), + .ops = &clk_rcg2_ops, + .flags = CLK_SET_RATE_PARENT, + }, +@@ -1452,9 +1285,8 @@ static struct clk_regmap_div nss_ubi1_di + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_ubi1_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_ubi1_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ubi1_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ro_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1468,6 +1300,16 @@ static const struct freq_tbl ftbl_ubi_mp + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_out_main_div2[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0_out_main_div2.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_out_main_div2_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0_DIV2, 1 }, ++}; ++ + static struct clk_rcg2 ubi_mpt_clk_src = { + .cmd_rcgr = 0x68090, + .freq_tbl = ftbl_ubi_mpt_clk_src, +@@ -1475,8 +1317,8 @@ static struct clk_rcg2 ubi_mpt_clk_src = + .parent_map = gcc_xo_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "ubi_mpt_clk_src", +- .parent_names = gcc_xo_gpll0_out_main_div2, +- .num_parents = 2, ++ .parent_data = gcc_xo_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1487,6 +1329,18 @@ static const struct freq_tbl ftbl_nss_im + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_gpll4[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll4.clkr.hw }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_gpll4_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++ { P_GPLL4, 2 }, ++}; ++ + static struct clk_rcg2 nss_imem_clk_src = { + .cmd_rcgr = 0x68158, + .freq_tbl = ftbl_nss_imem_clk_src, +@@ -1494,8 +1348,8 @@ static struct clk_rcg2 nss_imem_clk_src + .parent_map = gcc_xo_gpll0_gpll4_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_imem_clk_src", +- .parent_names = gcc_xo_gpll0_gpll4, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll4, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1506,6 +1360,24 @@ static const struct freq_tbl ftbl_nss_pp + { } + }; + ++static const struct clk_parent_data gcc_xo_bias_gpll0_gpll4_nss_ubi32[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "bias_pll_cc_clk" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll4.clkr.hw }, ++ { .hw = &nss_crypto_pll.clkr.hw }, ++ { .hw = &ubi32_pll.clkr.hw }, ++}; ++ ++static const struct parent_map gcc_xo_bias_gpll0_gpll4_nss_ubi32_map[] = { ++ { P_XO, 0 }, ++ { P_BIAS_PLL, 1 }, ++ { P_GPLL0, 2 }, ++ { P_GPLL4, 3 }, ++ { P_NSS_CRYPTO_PLL, 4 }, ++ { P_UBI32_PLL, 5 }, ++}; ++ + static struct clk_rcg2 nss_ppe_clk_src = { + .cmd_rcgr = 0x68080, + .freq_tbl = ftbl_nss_ppe_clk_src, +@@ -1513,8 +1385,8 @@ static struct clk_rcg2 nss_ppe_clk_src = + .parent_map = gcc_xo_bias_gpll0_gpll4_nss_ubi32_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_ppe_clk_src", +- .parent_names = gcc_xo_bias_gpll0_gpll4_nss_ubi32, +- .num_parents = 6, ++ .parent_data = gcc_xo_bias_gpll0_gpll4_nss_ubi32, ++ .num_parents = ARRAY_SIZE(gcc_xo_bias_gpll0_gpll4_nss_ubi32), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1524,9 +1396,8 @@ static struct clk_fixed_factor nss_ppe_c + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "nss_ppe_cdiv_clk_src", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1540,6 +1411,22 @@ static const struct freq_tbl ftbl_nss_po + { } + }; + ++static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_ubi32_bias[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "uniphy0_gcc_rx_clk" }, ++ { .name = "uniphy0_gcc_tx_clk" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .name = "bias_pll_cc_clk" }, ++}; ++ ++static const struct parent_map gcc_xo_uniphy0_rx_tx_ubi32_bias_map[] = { ++ { P_XO, 0 }, ++ { P_UNIPHY0_RX, 1 }, ++ { P_UNIPHY0_TX, 2 }, ++ { P_UBI32_PLL, 5 }, ++ { P_BIAS_PLL, 6 }, ++}; ++ + static struct clk_rcg2 nss_port1_rx_clk_src = { + .cmd_rcgr = 0x68020, + .freq_tbl = ftbl_nss_port1_rx_clk_src, +@@ -1547,8 +1434,8 @@ static struct clk_rcg2 nss_port1_rx_clk_ + .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port1_rx_clk_src", +- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1560,9 +1447,8 @@ static struct clk_regmap_div nss_port1_r + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port1_rx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port1_rx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port1_rx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1577,6 +1463,22 @@ static const struct freq_tbl ftbl_nss_po + { } + }; + ++static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_ubi32_bias[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "uniphy0_gcc_tx_clk" }, ++ { .name = "uniphy0_gcc_rx_clk" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .name = "bias_pll_cc_clk" }, ++}; ++ ++static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = { ++ { P_XO, 0 }, ++ { P_UNIPHY0_TX, 1 }, ++ { P_UNIPHY0_RX, 2 }, ++ { P_UBI32_PLL, 5 }, ++ { P_BIAS_PLL, 6 }, ++}; ++ + static struct clk_rcg2 nss_port1_tx_clk_src = { + .cmd_rcgr = 0x68028, + .freq_tbl = ftbl_nss_port1_tx_clk_src, +@@ -1584,8 +1486,8 @@ static struct clk_rcg2 nss_port1_tx_clk_ + .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port1_tx_clk_src", +- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1597,9 +1499,8 @@ static struct clk_regmap_div nss_port1_t + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port1_tx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port1_tx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port1_tx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1614,8 +1515,8 @@ static struct clk_rcg2 nss_port2_rx_clk_ + .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port2_rx_clk_src", +- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1627,9 +1528,8 @@ static struct clk_regmap_div nss_port2_r + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port2_rx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port2_rx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port2_rx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1644,8 +1544,8 @@ static struct clk_rcg2 nss_port2_tx_clk_ + .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port2_tx_clk_src", +- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1657,9 +1557,8 @@ static struct clk_regmap_div nss_port2_t + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port2_tx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port2_tx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port2_tx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1674,8 +1573,8 @@ static struct clk_rcg2 nss_port3_rx_clk_ + .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port3_rx_clk_src", +- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1687,9 +1586,8 @@ static struct clk_regmap_div nss_port3_r + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port3_rx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port3_rx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port3_rx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1704,8 +1602,8 @@ static struct clk_rcg2 nss_port3_tx_clk_ + .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port3_tx_clk_src", +- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1717,9 +1615,8 @@ static struct clk_regmap_div nss_port3_t + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port3_tx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port3_tx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port3_tx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1734,8 +1631,8 @@ static struct clk_rcg2 nss_port4_rx_clk_ + .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port4_rx_clk_src", +- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1747,9 +1644,8 @@ static struct clk_regmap_div nss_port4_r + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port4_rx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port4_rx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port4_rx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1764,8 +1660,8 @@ static struct clk_rcg2 nss_port4_tx_clk_ + .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port4_tx_clk_src", +- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1777,9 +1673,8 @@ static struct clk_regmap_div nss_port4_t + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port4_tx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port4_tx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port4_tx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1799,6 +1694,27 @@ static const struct freq_tbl ftbl_nss_po + { } + }; + ++static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "uniphy0_gcc_rx_clk" }, ++ { .name = "uniphy0_gcc_tx_clk" }, ++ { .name = "uniphy1_gcc_rx_clk" }, ++ { .name = "uniphy1_gcc_tx_clk" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .name = "bias_pll_cc_clk" }, ++}; ++ ++static const struct parent_map ++gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias_map[] = { ++ { P_XO, 0 }, ++ { P_UNIPHY0_RX, 1 }, ++ { P_UNIPHY0_TX, 2 }, ++ { P_UNIPHY1_RX, 3 }, ++ { P_UNIPHY1_TX, 4 }, ++ { P_UBI32_PLL, 5 }, ++ { P_BIAS_PLL, 6 }, ++}; ++ + static struct clk_rcg2 nss_port5_rx_clk_src = { + .cmd_rcgr = 0x68060, + .freq_tbl = ftbl_nss_port5_rx_clk_src, +@@ -1806,8 +1722,8 @@ static struct clk_rcg2 nss_port5_rx_clk_ + .parent_map = gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port5_rx_clk_src", +- .parent_names = gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias, +- .num_parents = 7, ++ .parent_data = gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1819,9 +1735,8 @@ static struct clk_regmap_div nss_port5_r + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port5_rx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port5_rx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_rx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1841,6 +1756,27 @@ static const struct freq_tbl ftbl_nss_po + { } + }; + ++static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "uniphy0_gcc_tx_clk" }, ++ { .name = "uniphy0_gcc_rx_clk" }, ++ { .name = "uniphy1_gcc_tx_clk" }, ++ { .name = "uniphy1_gcc_rx_clk" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .name = "bias_pll_cc_clk" }, ++}; ++ ++static const struct parent_map ++gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias_map[] = { ++ { P_XO, 0 }, ++ { P_UNIPHY0_TX, 1 }, ++ { P_UNIPHY0_RX, 2 }, ++ { P_UNIPHY1_TX, 3 }, ++ { P_UNIPHY1_RX, 4 }, ++ { P_UBI32_PLL, 5 }, ++ { P_BIAS_PLL, 6 }, ++}; ++ + static struct clk_rcg2 nss_port5_tx_clk_src = { + .cmd_rcgr = 0x68068, + .freq_tbl = ftbl_nss_port5_tx_clk_src, +@@ -1848,8 +1784,8 @@ static struct clk_rcg2 nss_port5_tx_clk_ + .parent_map = gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port5_tx_clk_src", +- .parent_names = gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias, +- .num_parents = 7, ++ .parent_data = gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1861,9 +1797,8 @@ static struct clk_regmap_div nss_port5_t + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port5_tx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port5_tx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_tx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1883,6 +1818,22 @@ static const struct freq_tbl ftbl_nss_po + { } + }; + ++static const struct clk_parent_data gcc_xo_uniphy2_rx_tx_ubi32_bias[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "uniphy2_gcc_rx_clk" }, ++ { .name = "uniphy2_gcc_tx_clk" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .name = "bias_pll_cc_clk" }, ++}; ++ ++static const struct parent_map gcc_xo_uniphy2_rx_tx_ubi32_bias_map[] = { ++ { P_XO, 0 }, ++ { P_UNIPHY2_RX, 1 }, ++ { P_UNIPHY2_TX, 2 }, ++ { P_UBI32_PLL, 5 }, ++ { P_BIAS_PLL, 6 }, ++}; ++ + static struct clk_rcg2 nss_port6_rx_clk_src = { + .cmd_rcgr = 0x68070, + .freq_tbl = ftbl_nss_port6_rx_clk_src, +@@ -1890,8 +1841,8 @@ static struct clk_rcg2 nss_port6_rx_clk_ + .parent_map = gcc_xo_uniphy2_rx_tx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port6_rx_clk_src", +- .parent_names = gcc_xo_uniphy2_rx_tx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy2_rx_tx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy2_rx_tx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1903,9 +1854,8 @@ static struct clk_regmap_div nss_port6_r + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port6_rx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port6_rx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port6_rx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1925,6 +1875,22 @@ static const struct freq_tbl ftbl_nss_po + { } + }; + ++static const struct clk_parent_data gcc_xo_uniphy2_tx_rx_ubi32_bias[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .name = "uniphy2_gcc_tx_clk" }, ++ { .name = "uniphy2_gcc_rx_clk" }, ++ { .hw = &ubi32_pll.clkr.hw }, ++ { .name = "bias_pll_cc_clk" }, ++}; ++ ++static const struct parent_map gcc_xo_uniphy2_tx_rx_ubi32_bias_map[] = { ++ { P_XO, 0 }, ++ { P_UNIPHY2_TX, 1 }, ++ { P_UNIPHY2_RX, 2 }, ++ { P_UBI32_PLL, 5 }, ++ { P_BIAS_PLL, 6 }, ++}; ++ + static struct clk_rcg2 nss_port6_tx_clk_src = { + .cmd_rcgr = 0x68078, + .freq_tbl = ftbl_nss_port6_tx_clk_src, +@@ -1932,8 +1898,8 @@ static struct clk_rcg2 nss_port6_tx_clk_ + .parent_map = gcc_xo_uniphy2_tx_rx_ubi32_bias_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "nss_port6_tx_clk_src", +- .parent_names = gcc_xo_uniphy2_tx_rx_ubi32_bias, +- .num_parents = 5, ++ .parent_data = gcc_xo_uniphy2_tx_rx_ubi32_bias, ++ .num_parents = ARRAY_SIZE(gcc_xo_uniphy2_tx_rx_ubi32_bias), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1945,9 +1911,8 @@ static struct clk_regmap_div nss_port6_t + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "nss_port6_tx_div_clk_src", +- .parent_names = (const char *[]){ +- "nss_port6_tx_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port6_tx_clk_src.clkr.hw }, + .num_parents = 1, + .ops = &clk_regmap_div_ops, + .flags = CLK_SET_RATE_PARENT, +@@ -1970,8 +1935,8 @@ static struct clk_rcg2 crypto_clk_src = + .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "crypto_clk_src", +- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, +- .num_parents = 3, ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), + .ops = &clk_rcg2_ops, + }, + }; +@@ -1981,6 +1946,22 @@ static struct freq_tbl ftbl_gp_clk_src[] + { } + }; + ++static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_sleep_clk[] = { ++ { .fw_name = "xo", .name = "xo" }, ++ { .hw = &gpll0.clkr.hw }, ++ { .hw = &gpll6.clkr.hw }, ++ { .hw = &gpll0_out_main_div2.hw }, ++ { .fw_name = "sleep_clk", .name = "sleep_clk" }, ++}; ++ ++static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map[] = { ++ { P_XO, 0 }, ++ { P_GPLL0, 1 }, ++ { P_GPLL6, 2 }, ++ { P_GPLL0_DIV2, 4 }, ++ { P_SLEEP_CLK, 6 }, ++}; ++ + static struct clk_rcg2 gp1_clk_src = { + .cmd_rcgr = 0x08004, + .freq_tbl = ftbl_gp_clk_src, +@@ -1989,8 +1970,8 @@ static struct clk_rcg2 gp1_clk_src = { + .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gp1_clk_src", +- .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, +- .num_parents = 5, ++ .parent_data = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; +@@ -2003,8 +1984,8 @@ static struct clk_rcg2 gp2_clk_src = { + .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gp2_clk_src", +- .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, +- .num_parents = 5, ++ .parent_data = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; +@@ -2017,8 +1998,8 @@ static struct clk_rcg2 gp3_clk_src = { + .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gp3_clk_src", +- .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, +- .num_parents = 5, ++ .parent_data = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_sleep_clk), + .ops = &clk_rcg2_ops, + }, + }; +@@ -2030,9 +2011,8 @@ static struct clk_branch gcc_blsp1_ahb_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2047,9 +2027,8 @@ static struct clk_branch gcc_blsp1_qup1_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup1_i2c_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup1_i2c_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup1_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2064,9 +2043,8 @@ static struct clk_branch gcc_blsp1_qup1_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup1_spi_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup1_spi_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup1_spi_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2081,9 +2059,8 @@ static struct clk_branch gcc_blsp1_qup2_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup2_i2c_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup2_i2c_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup2_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2098,9 +2075,8 @@ static struct clk_branch gcc_blsp1_qup2_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup2_spi_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup2_spi_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup2_spi_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2115,9 +2091,8 @@ static struct clk_branch gcc_blsp1_qup3_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup3_i2c_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup3_i2c_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup3_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2132,9 +2107,8 @@ static struct clk_branch gcc_blsp1_qup3_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup3_spi_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup3_spi_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup3_spi_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2149,9 +2123,8 @@ static struct clk_branch gcc_blsp1_qup4_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup4_i2c_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup4_i2c_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup4_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2166,9 +2139,8 @@ static struct clk_branch gcc_blsp1_qup4_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup4_spi_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup4_spi_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup4_spi_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2183,9 +2155,8 @@ static struct clk_branch gcc_blsp1_qup5_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup5_i2c_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup5_i2c_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup5_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2200,9 +2171,8 @@ static struct clk_branch gcc_blsp1_qup5_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup5_spi_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup5_spi_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup5_spi_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2217,9 +2187,8 @@ static struct clk_branch gcc_blsp1_qup6_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup6_i2c_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup6_i2c_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup6_i2c_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2234,9 +2203,8 @@ static struct clk_branch gcc_blsp1_qup6_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup6_spi_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_qup6_spi_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_qup6_spi_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2251,9 +2219,8 @@ static struct clk_branch gcc_blsp1_uart1 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart1_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_uart1_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_uart1_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2268,9 +2235,8 @@ static struct clk_branch gcc_blsp1_uart2 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart2_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_uart2_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_uart2_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2285,9 +2251,8 @@ static struct clk_branch gcc_blsp1_uart3 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart3_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_uart3_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_uart3_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2302,9 +2267,8 @@ static struct clk_branch gcc_blsp1_uart4 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart4_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_uart4_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_uart4_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2319,9 +2283,8 @@ static struct clk_branch gcc_blsp1_uart5 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart5_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_uart5_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_uart5_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2336,9 +2299,8 @@ static struct clk_branch gcc_blsp1_uart6 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart6_apps_clk", +- .parent_names = (const char *[]){ +- "blsp1_uart6_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &blsp1_uart6_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2354,9 +2316,8 @@ static struct clk_branch gcc_prng_ahb_cl + .enable_mask = BIT(8), + .hw.init = &(struct clk_init_data){ + .name = "gcc_prng_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2371,9 +2332,8 @@ static struct clk_branch gcc_qpic_ahb_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qpic_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2388,9 +2348,8 @@ static struct clk_branch gcc_qpic_clk = + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_qpic_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2405,9 +2364,8 @@ static struct clk_branch gcc_pcie0_ahb_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2422,9 +2380,8 @@ static struct clk_branch gcc_pcie0_aux_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_aux_clk", +- .parent_names = (const char *[]){ +- "pcie0_aux_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie0_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2439,9 +2396,8 @@ static struct clk_branch gcc_pcie0_axi_m + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_axi_m_clk", +- .parent_names = (const char *[]){ +- "pcie0_axi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie0_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2456,9 +2412,8 @@ static struct clk_branch gcc_pcie0_axi_s + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_axi_s_clk", +- .parent_names = (const char *[]){ +- "pcie0_axi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie0_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2474,9 +2429,8 @@ static struct clk_branch gcc_pcie0_pipe_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_pipe_clk", +- .parent_names = (const char *[]){ +- "pcie0_pipe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie0_pipe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2491,9 +2445,8 @@ static struct clk_branch gcc_sys_noc_pci + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_pcie0_axi_clk", +- .parent_names = (const char *[]){ +- "pcie0_axi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie0_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2508,9 +2461,8 @@ static struct clk_branch gcc_pcie1_ahb_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2525,9 +2477,8 @@ static struct clk_branch gcc_pcie1_aux_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_aux_clk", +- .parent_names = (const char *[]){ +- "pcie1_aux_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie1_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2542,9 +2493,8 @@ static struct clk_branch gcc_pcie1_axi_m + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_axi_m_clk", +- .parent_names = (const char *[]){ +- "pcie1_axi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie1_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2559,9 +2509,8 @@ static struct clk_branch gcc_pcie1_axi_s + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_axi_s_clk", +- .parent_names = (const char *[]){ +- "pcie1_axi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie1_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2577,9 +2526,8 @@ static struct clk_branch gcc_pcie1_pipe_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie1_pipe_clk", +- .parent_names = (const char *[]){ +- "pcie1_pipe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie1_pipe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2594,9 +2542,8 @@ static struct clk_branch gcc_sys_noc_pci + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_pcie1_axi_clk", +- .parent_names = (const char *[]){ +- "pcie1_axi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcie1_axi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2611,9 +2558,8 @@ static struct clk_branch gcc_usb0_aux_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_aux_clk", +- .parent_names = (const char *[]){ +- "usb0_aux_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb0_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2628,9 +2574,8 @@ static struct clk_branch gcc_sys_noc_usb + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_usb0_axi_clk", +- .parent_names = (const char *[]){ +- "usb0_master_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb0_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2645,9 +2590,8 @@ static struct clk_branch gcc_usb0_master + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_master_clk", +- .parent_names = (const char *[]){ +- "usb0_master_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb0_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2662,9 +2606,8 @@ static struct clk_branch gcc_usb0_mock_u + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_mock_utmi_clk", +- .parent_names = (const char *[]){ +- "usb0_mock_utmi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb0_mock_utmi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2679,9 +2622,8 @@ static struct clk_branch gcc_usb0_phy_cf + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_phy_cfg_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2697,9 +2639,8 @@ static struct clk_branch gcc_usb0_pipe_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_pipe_clk", +- .parent_names = (const char *[]){ +- "usb0_pipe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb0_pipe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2714,9 +2655,8 @@ static struct clk_branch gcc_usb0_sleep_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb0_sleep_clk", +- .parent_names = (const char *[]){ +- "gcc_sleep_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_sleep_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2731,9 +2671,8 @@ static struct clk_branch gcc_usb1_aux_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb1_aux_clk", +- .parent_names = (const char *[]){ +- "usb1_aux_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb1_aux_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2748,9 +2687,8 @@ static struct clk_branch gcc_sys_noc_usb + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sys_noc_usb1_axi_clk", +- .parent_names = (const char *[]){ +- "usb1_master_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb1_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2765,9 +2703,8 @@ static struct clk_branch gcc_usb1_master + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb1_master_clk", +- .parent_names = (const char *[]){ +- "usb1_master_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb1_master_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2782,9 +2719,8 @@ static struct clk_branch gcc_usb1_mock_u + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb1_mock_utmi_clk", +- .parent_names = (const char *[]){ +- "usb1_mock_utmi_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb1_mock_utmi_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2799,9 +2735,8 @@ static struct clk_branch gcc_usb1_phy_cf + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb1_phy_cfg_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2817,9 +2752,8 @@ static struct clk_branch gcc_usb1_pipe_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb1_pipe_clk", +- .parent_names = (const char *[]){ +- "usb1_pipe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &usb1_pipe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2834,9 +2768,8 @@ static struct clk_branch gcc_usb1_sleep_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb1_sleep_clk", +- .parent_names = (const char *[]){ +- "gcc_sleep_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_sleep_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2851,9 +2784,8 @@ static struct clk_branch gcc_sdcc1_ahb_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc1_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2868,9 +2800,8 @@ static struct clk_branch gcc_sdcc1_apps_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc1_apps_clk", +- .parent_names = (const char *[]){ +- "sdcc1_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &sdcc1_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2885,9 +2816,8 @@ static struct clk_branch gcc_sdcc1_ice_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc1_ice_core_clk", +- .parent_names = (const char *[]){ +- "sdcc1_ice_core_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &sdcc1_ice_core_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2902,9 +2832,8 @@ static struct clk_branch gcc_sdcc2_ahb_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc2_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2919,9 +2848,8 @@ static struct clk_branch gcc_sdcc2_apps_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc2_apps_clk", +- .parent_names = (const char *[]){ +- "sdcc2_apps_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &sdcc2_apps_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2936,9 +2864,8 @@ static struct clk_branch gcc_mem_noc_nss + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mem_noc_nss_axi_clk", +- .parent_names = (const char *[]){ +- "nss_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2953,9 +2880,8 @@ static struct clk_branch gcc_nss_ce_apb_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ce_apb_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2970,9 +2896,8 @@ static struct clk_branch gcc_nss_ce_axi_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ce_axi_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -2987,9 +2912,8 @@ static struct clk_branch gcc_nss_cfg_clk + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_cfg_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3004,9 +2928,8 @@ static struct clk_branch gcc_nss_crypto_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_crypto_clk", +- .parent_names = (const char *[]){ +- "nss_crypto_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_crypto_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3021,9 +2944,8 @@ static struct clk_branch gcc_nss_csr_clk + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_csr_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3038,9 +2960,8 @@ static struct clk_branch gcc_nss_edma_cf + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_edma_cfg_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3055,9 +2976,8 @@ static struct clk_branch gcc_nss_edma_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_edma_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3072,9 +2992,8 @@ static struct clk_branch gcc_nss_imem_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_imem_clk", +- .parent_names = (const char *[]){ +- "nss_imem_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_imem_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3089,9 +3008,8 @@ static struct clk_branch gcc_nss_noc_clk + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_noc_clk", +- .parent_names = (const char *[]){ +- "nss_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3106,9 +3024,8 @@ static struct clk_branch gcc_nss_ppe_btq + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ppe_btq_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3123,9 +3040,8 @@ static struct clk_branch gcc_nss_ppe_cfg + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ppe_cfg_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3140,9 +3056,8 @@ static struct clk_branch gcc_nss_ppe_clk + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ppe_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3157,9 +3072,8 @@ static struct clk_branch gcc_nss_ppe_ipe + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ppe_ipe_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3174,9 +3088,8 @@ static struct clk_branch gcc_nss_ptp_ref + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_ptp_ref_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_cdiv_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_cdiv_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3192,9 +3105,8 @@ static struct clk_branch gcc_crypto_ppe_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_ppe_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3209,9 +3121,8 @@ static struct clk_branch gcc_nssnoc_ce_a + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_ce_apb_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3226,9 +3137,8 @@ static struct clk_branch gcc_nssnoc_ce_a + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_ce_axi_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3243,9 +3153,8 @@ static struct clk_branch gcc_nssnoc_cryp + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_crypto_clk", +- .parent_names = (const char *[]){ +- "nss_crypto_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_crypto_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3260,9 +3169,8 @@ static struct clk_branch gcc_nssnoc_ppe_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_ppe_cfg_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3277,9 +3185,8 @@ static struct clk_branch gcc_nssnoc_ppe_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_ppe_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3294,9 +3201,8 @@ static struct clk_branch gcc_nssnoc_qosg + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_qosgen_ref_clk", +- .parent_names = (const char *[]){ +- "gcc_xo_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3311,9 +3217,8 @@ static struct clk_branch gcc_nssnoc_snoc + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_snoc_clk", +- .parent_names = (const char *[]){ +- "system_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &system_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3328,9 +3233,8 @@ static struct clk_branch gcc_nssnoc_time + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_timeout_ref_clk", +- .parent_names = (const char *[]){ +- "gcc_xo_div4_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_div4_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3345,9 +3249,8 @@ static struct clk_branch gcc_nssnoc_ubi0 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_ubi0_ahb_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3362,9 +3265,8 @@ static struct clk_branch gcc_nssnoc_ubi1 + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nssnoc_ubi1_ahb_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3380,9 +3282,8 @@ static struct clk_branch gcc_ubi0_ahb_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_ahb_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3398,9 +3299,8 @@ static struct clk_branch gcc_ubi0_axi_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_axi_clk", +- .parent_names = (const char *[]){ +- "nss_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3416,9 +3316,8 @@ static struct clk_branch gcc_ubi0_nc_axi + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_nc_axi_clk", +- .parent_names = (const char *[]){ +- "nss_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3434,9 +3333,8 @@ static struct clk_branch gcc_ubi0_core_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_core_clk", +- .parent_names = (const char *[]){ +- "nss_ubi0_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ubi0_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3452,9 +3350,8 @@ static struct clk_branch gcc_ubi0_mpt_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi0_mpt_clk", +- .parent_names = (const char *[]){ +- "ubi_mpt_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &ubi_mpt_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3470,9 +3367,8 @@ static struct clk_branch gcc_ubi1_ahb_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi1_ahb_clk", +- .parent_names = (const char *[]){ +- "nss_ce_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ce_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3488,9 +3384,8 @@ static struct clk_branch gcc_ubi1_axi_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi1_axi_clk", +- .parent_names = (const char *[]){ +- "nss_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3506,9 +3401,8 @@ static struct clk_branch gcc_ubi1_nc_axi + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi1_nc_axi_clk", +- .parent_names = (const char *[]){ +- "nss_noc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_noc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3524,9 +3418,8 @@ static struct clk_branch gcc_ubi1_core_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi1_core_clk", +- .parent_names = (const char *[]){ +- "nss_ubi1_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ubi1_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3542,9 +3435,8 @@ static struct clk_branch gcc_ubi1_mpt_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_ubi1_mpt_clk", +- .parent_names = (const char *[]){ +- "ubi_mpt_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &ubi_mpt_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3559,9 +3451,8 @@ static struct clk_branch gcc_cmn_12gpll_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cmn_12gpll_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3576,9 +3467,8 @@ static struct clk_branch gcc_cmn_12gpll_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_cmn_12gpll_sys_clk", +- .parent_names = (const char *[]){ +- "gcc_xo_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3593,9 +3483,8 @@ static struct clk_branch gcc_mdio_ahb_cl + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mdio_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3610,9 +3499,8 @@ static struct clk_branch gcc_uniphy0_ahb + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3627,9 +3515,8 @@ static struct clk_branch gcc_uniphy0_sys + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_sys_clk", +- .parent_names = (const char *[]){ +- "gcc_xo_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3644,9 +3531,8 @@ static struct clk_branch gcc_uniphy1_ahb + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy1_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3661,9 +3547,8 @@ static struct clk_branch gcc_uniphy1_sys + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy1_sys_clk", +- .parent_names = (const char *[]){ +- "gcc_xo_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3678,9 +3563,8 @@ static struct clk_branch gcc_uniphy2_ahb + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy2_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3695,9 +3579,8 @@ static struct clk_branch gcc_uniphy2_sys + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy2_sys_clk", +- .parent_names = (const char *[]){ +- "gcc_xo_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gcc_xo_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3712,9 +3595,8 @@ static struct clk_branch gcc_nss_port1_r + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port1_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port1_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port1_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3729,9 +3611,8 @@ static struct clk_branch gcc_nss_port1_t + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port1_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port1_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port1_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3746,9 +3627,8 @@ static struct clk_branch gcc_nss_port2_r + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port2_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port2_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port2_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3763,9 +3643,8 @@ static struct clk_branch gcc_nss_port2_t + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port2_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port2_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port2_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3780,9 +3659,8 @@ static struct clk_branch gcc_nss_port3_r + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port3_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port3_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port3_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3797,9 +3675,8 @@ static struct clk_branch gcc_nss_port3_t + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port3_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port3_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port3_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3814,9 +3691,8 @@ static struct clk_branch gcc_nss_port4_r + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port4_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port4_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port4_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3831,9 +3707,8 @@ static struct clk_branch gcc_nss_port4_t + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port4_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port4_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port4_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3848,9 +3723,8 @@ static struct clk_branch gcc_nss_port5_r + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port5_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port5_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3865,9 +3739,8 @@ static struct clk_branch gcc_nss_port5_t + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port5_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port5_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3882,9 +3755,8 @@ static struct clk_branch gcc_nss_port6_r + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port6_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port6_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port6_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3899,9 +3771,8 @@ static struct clk_branch gcc_nss_port6_t + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_nss_port6_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port6_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port6_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3916,9 +3787,8 @@ static struct clk_branch gcc_port1_mac_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_port1_mac_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3933,9 +3803,8 @@ static struct clk_branch gcc_port2_mac_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_port2_mac_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3950,9 +3819,8 @@ static struct clk_branch gcc_port3_mac_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_port3_mac_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3967,9 +3835,8 @@ static struct clk_branch gcc_port4_mac_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_port4_mac_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -3984,9 +3851,8 @@ static struct clk_branch gcc_port5_mac_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_port5_mac_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4001,9 +3867,8 @@ static struct clk_branch gcc_port6_mac_c + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_port6_mac_clk", +- .parent_names = (const char *[]){ +- "nss_ppe_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_ppe_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4018,9 +3883,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port1_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port1_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port1_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4035,9 +3899,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port1_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port1_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port1_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4052,9 +3915,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port2_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port2_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port2_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4069,9 +3931,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port2_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port2_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port2_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4086,9 +3947,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port3_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port3_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port3_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4103,9 +3963,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port3_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port3_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port3_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4120,9 +3979,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port4_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port4_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port4_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4137,9 +3995,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port4_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port4_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port4_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4154,9 +4011,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port5_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port5_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4171,9 +4027,8 @@ static struct clk_branch gcc_uniphy0_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy0_port5_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port5_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4188,9 +4043,8 @@ static struct clk_branch gcc_uniphy1_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy1_port5_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port5_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4205,9 +4059,8 @@ static struct clk_branch gcc_uniphy1_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy1_port5_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port5_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port5_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4222,9 +4075,8 @@ static struct clk_branch gcc_uniphy2_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy2_port6_rx_clk", +- .parent_names = (const char *[]){ +- "nss_port6_rx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port6_rx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4239,9 +4091,8 @@ static struct clk_branch gcc_uniphy2_por + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_uniphy2_port6_tx_clk", +- .parent_names = (const char *[]){ +- "nss_port6_tx_div_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &nss_port6_tx_div_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4257,9 +4108,8 @@ static struct clk_branch gcc_crypto_ahb_ + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_ahb_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4275,9 +4125,8 @@ static struct clk_branch gcc_crypto_axi_ + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_axi_clk", +- .parent_names = (const char *[]){ +- "pcnoc_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &pcnoc_clk_src.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4293,9 +4142,8 @@ static struct clk_branch gcc_crypto_clk + .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_clk", +- .parent_names = (const char *[]){ +- "crypto_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &crypto_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4310,9 +4158,8 @@ static struct clk_branch gcc_gp1_clk = { + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp1_clk", +- .parent_names = (const char *[]){ +- "gp1_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gp1_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4327,9 +4174,8 @@ static struct clk_branch gcc_gp2_clk = { + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp2_clk", +- .parent_names = (const char *[]){ +- "gp2_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gp2_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4344,9 +4190,8 @@ static struct clk_branch gcc_gp3_clk = { + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp3_clk", +- .parent_names = (const char *[]){ +- "gp3_clk_src" +- }, ++ .parent_hws = (const struct clk_hw *[]){ ++ &gp3_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, +@@ -4368,7 +4213,7 @@ static struct clk_rcg2 pcie0_rchng_clk_s + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie0_rchng_clk_src", + .parent_data = gcc_xo_gpll0, +- .num_parents = 2, ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0), + .ops = &clk_rcg2_ops, + }, + }; diff --git a/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch b/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch new file mode 100644 index 0000000000..6a525f2c3e --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch @@ -0,0 +1,54 @@ +From 72bc31aa621e21a7c36a7da8aa6f6a77bb234e0b Mon Sep 17 00:00:00 2001 +From: Stephan Gerhold +Date: Wed, 6 Jul 2022 15:41:29 +0200 +Subject: [PATCH] clk: qcom: reset: Allow specifying custom reset delay + +The amount of time required between asserting and deasserting the reset +signal can vary depending on the involved hardware component. Sometimes +1 us might not be enough and a larger delay is necessary to conform to +the specifications. + +Usually this is worked around in the consuming drivers, by replacing +reset_control_reset() with a sequence of reset_control_assert(), waiting +for a custom delay, followed by reset_control_deassert(). + +However, in some cases the driver making use of the reset is generic and +can be used with different reset controllers. In this case the reset +time requirement is better handled directly by the reset controller +driver. + +Make this possible by adding an "udelay" field to the qcom_reset_map +that allows setting a different reset delay (in microseconds). + +Signed-off-by: Stephan Gerhold +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220706134132.3623415-4-stephan.gerhold@kernkonzept.com +--- + drivers/clk/qcom/reset.c | 4 +++- + drivers/clk/qcom/reset.h | 1 + + 2 files changed, 4 insertions(+), 1 deletion(-) + +--- a/drivers/clk/qcom/reset.c ++++ b/drivers/clk/qcom/reset.c +@@ -13,8 +13,10 @@ + + static int qcom_reset(struct reset_controller_dev *rcdev, unsigned long id) + { ++ struct qcom_reset_controller *rst = to_qcom_reset_controller(rcdev); ++ + rcdev->ops->assert(rcdev, id); +- udelay(1); ++ udelay(rst->reset_map[id].udelay ?: 1); /* use 1 us as default */ + rcdev->ops->deassert(rcdev, id); + return 0; + } +--- a/drivers/clk/qcom/reset.h ++++ b/drivers/clk/qcom/reset.h +@@ -11,6 +11,7 @@ + struct qcom_reset_map { + unsigned int reg; + u8 bit; ++ u8 udelay; + }; + + struct regmap; diff --git a/target/linux/ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch b/target/linux/ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch new file mode 100644 index 0000000000..e0725a6612 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch @@ -0,0 +1,59 @@ +From 813ba3e427671ba3ff35c825087b03f0ad91cf02 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Mon, 7 Nov 2022 14:28:59 +0100 +Subject: [PATCH] clk: qcom: reset: support resetting multiple bits + +This patch adds the support for giving the complete bitmask +in reset structure and reset operation will use this bitmask +for all reset operations. + +Currently, reset structure only takes a single bit for each reset +and then calculates the bitmask by using the BIT() macro. + +However, this is not sufficient anymore for newer SoC-s like IPQ8074, +IPQ6018 and more, since their networking resets require multiple bits +to be asserted in order to properly reset the HW block completely. + +So, in order to allow asserting multiple bits add "bitmask" field to +qcom_reset_map, and then use that bitmask value if its populated in the +driver, if its not populated, then we just default to existing behaviour +and calculate the bitmask on the fly. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221107132901.489240-1-robimarko@gmail.com +--- + drivers/clk/qcom/reset.c | 4 ++-- + drivers/clk/qcom/reset.h | 1 + + 2 files changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/clk/qcom/reset.c ++++ b/drivers/clk/qcom/reset.c +@@ -30,7 +30,7 @@ qcom_reset_assert(struct reset_controlle + + rst = to_qcom_reset_controller(rcdev); + map = &rst->reset_map[id]; +- mask = BIT(map->bit); ++ mask = map->bitmask ? map->bitmask : BIT(map->bit); + + return regmap_update_bits(rst->regmap, map->reg, mask, mask); + } +@@ -44,7 +44,7 @@ qcom_reset_deassert(struct reset_control + + rst = to_qcom_reset_controller(rcdev); + map = &rst->reset_map[id]; +- mask = BIT(map->bit); ++ mask = map->bitmask ? map->bitmask : BIT(map->bit); + + return regmap_update_bits(rst->regmap, map->reg, mask, 0); + } +--- a/drivers/clk/qcom/reset.h ++++ b/drivers/clk/qcom/reset.h +@@ -12,6 +12,7 @@ struct qcom_reset_map { + unsigned int reg; + u8 bit; + u8 udelay; ++ u32 bitmask; + }; + + struct regmap; diff --git a/target/linux/ipq807x/patches-5.15/0050-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch b/target/linux/ipq807x/patches-5.15/0050-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch new file mode 100644 index 0000000000..75f16a1673 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0050-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch @@ -0,0 +1,39 @@ +From e78a40eb24187a8b4f9b89e2181f674df39c2013 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Mon, 7 Nov 2022 14:29:00 +0100 +Subject: [PATCH] dt-bindings: clock: qcom: ipq8074: add missing networking + resets + +Add bindings for the missing networking resets found in IPQ8074 GCC. + +Signed-off-by: Robert Marko +Acked-by: Krzysztof Kozlowski +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221107132901.489240-2-robimarko@gmail.com +--- + include/dt-bindings/clock/qcom,gcc-ipq8074.h | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +--- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h ++++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h +@@ -367,6 +367,20 @@ + #define GCC_PCIE1_AHB_ARES 129 + #define GCC_PCIE1_AXI_MASTER_STICKY_ARES 130 + #define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 131 ++#define GCC_PPE_FULL_RESET 132 ++#define GCC_UNIPHY0_SOFT_RESET 133 ++#define GCC_UNIPHY0_XPCS_RESET 134 ++#define GCC_UNIPHY1_SOFT_RESET 135 ++#define GCC_UNIPHY1_XPCS_RESET 136 ++#define GCC_UNIPHY2_SOFT_RESET 137 ++#define GCC_UNIPHY2_XPCS_RESET 138 ++#define GCC_EDMA_HW_RESET 139 ++#define GCC_NSSPORT1_RESET 140 ++#define GCC_NSSPORT2_RESET 141 ++#define GCC_NSSPORT3_RESET 142 ++#define GCC_NSSPORT4_RESET 143 ++#define GCC_NSSPORT5_RESET 144 ++#define GCC_NSSPORT6_RESET 145 + + #define USB0_GDSC 0 + #define USB1_GDSC 1 diff --git a/target/linux/ipq807x/patches-5.15/0051-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch b/target/linux/ipq807x/patches-5.15/0051-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch new file mode 100644 index 0000000000..212fc84869 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0051-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch @@ -0,0 +1,41 @@ +From da76cb63d04dc22ed32123b8c1d084c006d67bfb Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Mon, 7 Nov 2022 14:29:01 +0100 +Subject: [PATCH] clk: qcom: ipq8074: add missing networking resets + +Downstream QCA 5.4 kernel defines networking resets which are not present +in the mainline kernel but are required for the networking drivers. + +So, port the downstream resets and avoid using magic values for mask, +construct mask for resets which require multiple bits to be set/cleared. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221107132901.489240-3-robimarko@gmail.com +--- + drivers/clk/qcom/gcc-ipq8074.c | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -4671,6 +4671,20 @@ static const struct qcom_reset_map gcc_i + [GCC_PCIE1_AXI_SLAVE_ARES] = { 0x76040, 4 }, + [GCC_PCIE1_AHB_ARES] = { 0x76040, 5 }, + [GCC_PCIE1_AXI_MASTER_STICKY_ARES] = { 0x76040, 6 }, ++ [GCC_PPE_FULL_RESET] = { .reg = 0x68014, .bitmask = GENMASK(19, 16) }, ++ [GCC_UNIPHY0_SOFT_RESET] = { .reg = 0x56004, .bitmask = GENMASK(13, 4) | BIT(1) }, ++ [GCC_UNIPHY0_XPCS_RESET] = { 0x56004, 2 }, ++ [GCC_UNIPHY1_SOFT_RESET] = { .reg = 0x56104, .bitmask = GENMASK(5, 4) | BIT(1) }, ++ [GCC_UNIPHY1_XPCS_RESET] = { 0x56104, 2 }, ++ [GCC_UNIPHY2_SOFT_RESET] = { .reg = 0x56204, .bitmask = GENMASK(5, 4) | BIT(1) }, ++ [GCC_UNIPHY2_XPCS_RESET] = { 0x56204, 2 }, ++ [GCC_EDMA_HW_RESET] = { .reg = 0x68014, .bitmask = GENMASK(21, 20) }, ++ [GCC_NSSPORT1_RESET] = { .reg = 0x68014, .bitmask = BIT(24) | GENMASK(1, 0) }, ++ [GCC_NSSPORT2_RESET] = { .reg = 0x68014, .bitmask = BIT(25) | GENMASK(3, 2) }, ++ [GCC_NSSPORT3_RESET] = { .reg = 0x68014, .bitmask = BIT(26) | GENMASK(5, 4) }, ++ [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = BIT(27) | GENMASK(9, 8) }, ++ [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = BIT(28) | GENMASK(11, 10) }, ++ [GCC_NSSPORT6_RESET] = { .reg = 0x68014, .bitmask = BIT(29) | GENMASK(13, 12) }, + }; + + static struct gdsc *gcc_ipq8074_gdscs[] = { diff --git a/target/linux/ipq807x/patches-5.15/0052-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch b/target/linux/ipq807x/patches-5.15/0052-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch new file mode 100644 index 0000000000..7372b1da8e --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0052-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch @@ -0,0 +1,152 @@ +From 78936d46470938caa9a7ea529deeb36777b4f98e Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 16 Nov 2022 22:46:55 +0100 +Subject: [PATCH] clk: qcom: ipq8074: populate fw_name for all parents + +It appears that having only .name populated in parent_data for clocks +which are only globally searchable currently will not work as the clk core +won't copy that name if there is no .fw_name present as well. + +So, populate .fw_name for all parent clocks in parent_data. + +Fixes: ae55ad32e273 ("clk: qcom: ipq8074: convert to parent data") + +Co-developed-by: Christian Marangi +Signed-off-by: Christian Marangi +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221116214655.1116467-1-robimarko@gmail.com +--- + drivers/clk/qcom/gcc-ipq8074.c | 52 +++++++++++++++++----------------- + 1 file changed, 26 insertions(+), 26 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -680,7 +680,7 @@ static struct clk_rcg2 pcie0_aux_clk_src + }; + + static const struct clk_parent_data gcc_pcie20_phy0_pipe_clk_xo[] = { +- { .name = "pcie20_phy0_pipe_clk" }, ++ { .fw_name = "pcie0_pipe", .name = "pcie20_phy0_pipe_clk" }, + { .fw_name = "xo", .name = "xo" }, + }; + +@@ -733,7 +733,7 @@ static struct clk_rcg2 pcie1_aux_clk_src + }; + + static const struct clk_parent_data gcc_pcie20_phy1_pipe_clk_xo[] = { +- { .name = "pcie20_phy1_pipe_clk" }, ++ { .fw_name = "pcie1_pipe", .name = "pcie20_phy1_pipe_clk" }, + { .fw_name = "xo", .name = "xo" }, + }; + +@@ -1137,7 +1137,7 @@ static const struct freq_tbl ftbl_nss_no + + static const struct clk_parent_data gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "bias_pll_nss_noc_clk" }, ++ { .fw_name = "bias_pll_nss_noc_clk", .name = "bias_pll_nss_noc_clk" }, + { .hw = &gpll0.clkr.hw }, + { .hw = &gpll2.clkr.hw }, + }; +@@ -1362,7 +1362,7 @@ static const struct freq_tbl ftbl_nss_pp + + static const struct clk_parent_data gcc_xo_bias_gpll0_gpll4_nss_ubi32[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + { .hw = &gpll0.clkr.hw }, + { .hw = &gpll4.clkr.hw }, + { .hw = &nss_crypto_pll.clkr.hw }, +@@ -1413,10 +1413,10 @@ static const struct freq_tbl ftbl_nss_po + + static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_ubi32_bias[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "uniphy0_gcc_rx_clk" }, +- { .name = "uniphy0_gcc_tx_clk" }, ++ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" }, ++ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" }, + { .hw = &ubi32_pll.clkr.hw }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + }; + + static const struct parent_map gcc_xo_uniphy0_rx_tx_ubi32_bias_map[] = { +@@ -1465,10 +1465,10 @@ static const struct freq_tbl ftbl_nss_po + + static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_ubi32_bias[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "uniphy0_gcc_tx_clk" }, +- { .name = "uniphy0_gcc_rx_clk" }, ++ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" }, ++ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" }, + { .hw = &ubi32_pll.clkr.hw }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + }; + + static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = { +@@ -1696,12 +1696,12 @@ static const struct freq_tbl ftbl_nss_po + + static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "uniphy0_gcc_rx_clk" }, +- { .name = "uniphy0_gcc_tx_clk" }, +- { .name = "uniphy1_gcc_rx_clk" }, +- { .name = "uniphy1_gcc_tx_clk" }, ++ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" }, ++ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" }, ++ { .fw_name = "uniphy1_gcc_rx_clk", .name = "uniphy1_gcc_rx_clk" }, ++ { .fw_name = "uniphy1_gcc_tx_clk", .name = "uniphy1_gcc_tx_clk" }, + { .hw = &ubi32_pll.clkr.hw }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + }; + + static const struct parent_map +@@ -1758,12 +1758,12 @@ static const struct freq_tbl ftbl_nss_po + + static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "uniphy0_gcc_tx_clk" }, +- { .name = "uniphy0_gcc_rx_clk" }, +- { .name = "uniphy1_gcc_tx_clk" }, +- { .name = "uniphy1_gcc_rx_clk" }, ++ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" }, ++ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" }, ++ { .fw_name = "uniphy1_gcc_tx_clk", .name = "uniphy1_gcc_tx_clk" }, ++ { .fw_name = "uniphy1_gcc_rx_clk", .name = "uniphy1_gcc_rx_clk" }, + { .hw = &ubi32_pll.clkr.hw }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + }; + + static const struct parent_map +@@ -1820,10 +1820,10 @@ static const struct freq_tbl ftbl_nss_po + + static const struct clk_parent_data gcc_xo_uniphy2_rx_tx_ubi32_bias[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "uniphy2_gcc_rx_clk" }, +- { .name = "uniphy2_gcc_tx_clk" }, ++ { .fw_name = "uniphy2_gcc_rx_clk", .name = "uniphy2_gcc_rx_clk" }, ++ { .fw_name = "uniphy2_gcc_tx_clk", .name = "uniphy2_gcc_tx_clk" }, + { .hw = &ubi32_pll.clkr.hw }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + }; + + static const struct parent_map gcc_xo_uniphy2_rx_tx_ubi32_bias_map[] = { +@@ -1877,10 +1877,10 @@ static const struct freq_tbl ftbl_nss_po + + static const struct clk_parent_data gcc_xo_uniphy2_tx_rx_ubi32_bias[] = { + { .fw_name = "xo", .name = "xo" }, +- { .name = "uniphy2_gcc_tx_clk" }, +- { .name = "uniphy2_gcc_rx_clk" }, ++ { .fw_name = "uniphy2_gcc_tx_clk", .name = "uniphy2_gcc_tx_clk" }, ++ { .fw_name = "uniphy2_gcc_rx_clk", .name = "uniphy2_gcc_rx_clk" }, + { .hw = &ubi32_pll.clkr.hw }, +- { .name = "bias_pll_cc_clk" }, ++ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, + }; + + static const struct parent_map gcc_xo_uniphy2_tx_rx_ubi32_bias_map[] = { diff --git a/target/linux/ipq807x/patches-5.15/0053-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch b/target/linux/ipq807x/patches-5.15/0053-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch new file mode 100644 index 0000000000..2594d26cfe --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0053-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch @@ -0,0 +1,36 @@ +From 9033c3c86ea0dd35bd2ab957317573b755967298 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sun, 30 Oct 2022 18:57:03 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: pass XO and sleep clocks to GCC + +Pass XO and sleep clocks to the GCC controller so it does not have to +find them by matching globaly by name. + +If not passed directly, driver maintains backwards compatibility by then +falling back to global lookup. + +Since we are here, set cell numbers in decimal instead of hex. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221030175703.1103224-3-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 6 ++++-- + 1 file changed, 4 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -360,9 +360,11 @@ + gcc: gcc@1800000 { + compatible = "qcom,gcc-ipq8074"; + reg = <0x01800000 0x80000>; +- #clock-cells = <0x1>; ++ clocks = <&xo>, <&sleep_clk>; ++ clock-names = "xo", "sleep_clk"; ++ #clock-cells = <1>; + #power-domain-cells = <1>; +- #reset-cells = <0x1>; ++ #reset-cells = <1>; + }; + + tcsr_mutex: hwlock@1905000 { diff --git a/target/linux/ipq807x/patches-5.15/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch b/target/linux/ipq807x/patches-5.15/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch new file mode 100644 index 0000000000..b4ecd776a6 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0054-v6.1-arm64-dts-qcom-replace-deprecated-perst-gpio-with-pe.patch @@ -0,0 +1,52 @@ +From 0afa47c1b57ba645225b38654869a6e5d2939da5 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov +Date: Fri, 6 May 2022 18:21:07 +0300 +Subject: [PATCH] arm64: dts: qcom: replace deprecated perst-gpio with + perst-gpios + +Replace deprecated perst-gpio and wake-gpio properties with up-to-date +perst-gpios and wake-gpios in the Qualcomm device trees. + +Acked-by: Krzysztof Kozlowski +Signed-off-by: Dmitry Baryshkov +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220506152107.1527552-9-dmitry.baryshkov@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 4 ++-- + arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 4 ++-- + 2 files changed, 4 insertions(+), 4 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +@@ -49,12 +49,12 @@ + + &pcie0 { + status = "okay"; +- perst-gpio = <&tlmm 61 0x1>; ++ perst-gpios = <&tlmm 61 0x1>; + }; + + &pcie1 { + status = "okay"; +- perst-gpio = <&tlmm 58 0x1>; ++ perst-gpios = <&tlmm 58 0x1>; + }; + + &pcie_phy0 { +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +@@ -39,12 +39,12 @@ + + &pcie0 { + status = "ok"; +- perst-gpio = <&tlmm 58 0x1>; ++ perst-gpios = <&tlmm 58 0x1>; + }; + + &pcie1 { + status = "ok"; +- perst-gpio = <&tlmm 61 0x1>; ++ perst-gpios = <&tlmm 61 0x1>; + }; + + &pcie_phy0 { diff --git a/target/linux/ipq807x/patches-5.15/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch b/target/linux/ipq807x/patches-5.15/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch new file mode 100644 index 0000000000..fd1de69663 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0055-v6.0-spmi-add-a-helper-to-look-up-an-SPMI-device-from-a-d.patch @@ -0,0 +1,57 @@ +From 0eda4c5c7704363f665f4ccf0327349faad245a4 Mon Sep 17 00:00:00 2001 +From: Caleb Connolly +Date: Fri, 29 Apr 2022 23:08:56 +0100 +Subject: [PATCH] spmi: add a helper to look up an SPMI device from a device + node + +The helper function spmi_device_from_of() takes a device node and +returns the SPMI device associated with it. +This is like of_find_device_by_node but for SPMI devices. + +Signed-off-by: Caleb Connolly +Acked-by: Stephen Boyd +Link: https://lore.kernel.org/r/20220429220904.137297-2-caleb.connolly@linaro.org +Signed-off-by: Jonathan Cameron +--- + drivers/spmi/spmi.c | 17 +++++++++++++++++ + include/linux/spmi.h | 3 +++ + 2 files changed, 20 insertions(+) + +--- a/drivers/spmi/spmi.c ++++ b/drivers/spmi/spmi.c +@@ -387,6 +387,23 @@ static struct bus_type spmi_bus_type = { + }; + + /** ++ * spmi_device_from_of() - get the associated SPMI device from a device node ++ * ++ * @np: device node ++ * ++ * Returns the struct spmi_device associated with a device node or NULL. ++ */ ++struct spmi_device *spmi_device_from_of(struct device_node *np) ++{ ++ struct device *dev = bus_find_device_by_of_node(&spmi_bus_type, np); ++ ++ if (dev) ++ return to_spmi_device(dev); ++ return NULL; ++} ++EXPORT_SYMBOL_GPL(spmi_device_from_of); ++ ++/** + * spmi_controller_alloc() - Allocate a new SPMI device + * @ctrl: associated controller + * +--- a/include/linux/spmi.h ++++ b/include/linux/spmi.h +@@ -164,6 +164,9 @@ static inline void spmi_driver_unregiste + module_driver(__spmi_driver, spmi_driver_register, \ + spmi_driver_unregister) + ++struct device_node; ++ ++struct spmi_device *spmi_device_from_of(struct device_node *np); + int spmi_register_read(struct spmi_device *sdev, u8 addr, u8 *buf); + int spmi_ext_register_read(struct spmi_device *sdev, u8 addr, u8 *buf, + size_t len); diff --git a/target/linux/ipq807x/patches-5.15/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch b/target/linux/ipq807x/patches-5.15/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch new file mode 100644 index 0000000000..02a37aa376 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0056-v5.16-mfd-qcom-spmi-pmic-Sort-compatibles-in-the-driver.patch @@ -0,0 +1,60 @@ +From 60df90d6829d16338e2971420220395cfc289247 Mon Sep 17 00:00:00 2001 +From: Bjorn Andersson +Date: Sun, 17 Oct 2021 09:12:16 -0700 +Subject: [PATCH] mfd: qcom-spmi-pmic: Sort compatibles in the driver + +Sort the compatibles in the driver, to make it easier to validate that +the DT binding and driver are in sync. + +Signed-off-by: Bjorn Andersson +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20211017161218.2378176-2-bjorn.andersson@linaro.org +--- + drivers/mfd/qcom-spmi-pmic.c | 30 +++++++++++++++--------------- + 1 file changed, 15 insertions(+), 15 deletions(-) + +--- a/drivers/mfd/qcom-spmi-pmic.c ++++ b/drivers/mfd/qcom-spmi-pmic.c +@@ -40,27 +40,27 @@ + #define PM660_SUBTYPE 0x1B + + static const struct of_device_id pmic_spmi_id_table[] = { +- { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, +- { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, +- { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, ++ { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, ++ { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, ++ { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, ++ { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, + { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE }, +- { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, + { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE }, +- { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE }, +- { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, +- { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE }, +- { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE }, +- { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, +- { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, +- { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, ++ { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, ++ { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, + { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE }, ++ { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, ++ { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, + { .compatible = "qcom,pm8950", .data = (void *)PM8950_SUBTYPE }, +- { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE }, ++ { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE }, + { .compatible = "qcom,pm8998", .data = (void *)PM8998_SUBTYPE }, ++ { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE }, ++ { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE }, ++ { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE }, ++ { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, ++ { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, + { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE }, +- { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, +- { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, +- { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, ++ { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, + { } + }; + diff --git a/target/linux/ipq807x/patches-5.15/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch b/target/linux/ipq807x/patches-5.15/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch new file mode 100644 index 0000000000..c2b3e8304d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0057-v5.16-mfd-qcom-spmi-pmic-Add-missing-PMICs-supported-by-so.patch @@ -0,0 +1,65 @@ +From 18921bfd81c88fb85a19683467f680897672f062 Mon Sep 17 00:00:00 2001 +From: Bjorn Andersson +Date: Sun, 17 Oct 2021 09:12:18 -0700 +Subject: [PATCH] mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo + +The Qualcomm socinfo driver has eight more PMICs described, add these to +the SPMI PMIC driver as well. + +Signed-off-by: Bjorn Andersson +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20211017161218.2378176-4-bjorn.andersson@linaro.org +--- + drivers/mfd/qcom-spmi-pmic.c | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +--- a/drivers/mfd/qcom-spmi-pmic.c ++++ b/drivers/mfd/qcom-spmi-pmic.c +@@ -31,6 +31,8 @@ + #define PM8916_SUBTYPE 0x0b + #define PM8004_SUBTYPE 0x0c + #define PM8909_SUBTYPE 0x0d ++#define PM8028_SUBTYPE 0x0e ++#define PM8901_SUBTYPE 0x0f + #define PM8950_SUBTYPE 0x10 + #define PMI8950_SUBTYPE 0x11 + #define PM8998_SUBTYPE 0x14 +@@ -38,6 +40,13 @@ + #define PM8005_SUBTYPE 0x18 + #define PM660L_SUBTYPE 0x1A + #define PM660_SUBTYPE 0x1B ++#define PM8150_SUBTYPE 0x1E ++#define PM8150L_SUBTYPE 0x1f ++#define PM8150B_SUBTYPE 0x20 ++#define PMK8002_SUBTYPE 0x21 ++#define PM8009_SUBTYPE 0x24 ++#define PM8150C_SUBTYPE 0x26 ++#define SMB2351_SUBTYPE 0x29 + + static const struct of_device_id pmic_spmi_id_table[] = { + { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, +@@ -45,9 +54,15 @@ static const struct of_device_id pmic_sp + { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, + { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, + { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE }, ++ { .compatible = "qcom,pm8028", .data = (void *)PM8028_SUBTYPE }, + { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE }, ++ { .compatible = "qcom,pm8150", .data = (void *)PM8150_SUBTYPE }, ++ { .compatible = "qcom,pm8150b", .data = (void *)PM8150B_SUBTYPE }, ++ { .compatible = "qcom,pm8150c", .data = (void *)PM8150C_SUBTYPE }, ++ { .compatible = "qcom,pm8150l", .data = (void *)PM8150L_SUBTYPE }, + { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, + { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, ++ { .compatible = "qcom,pm8901", .data = (void *)PM8901_SUBTYPE }, + { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE }, + { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, + { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, +@@ -60,6 +75,8 @@ static const struct of_device_id pmic_sp + { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, + { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, + { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE }, ++ { .compatible = "qcom,pmk8002", .data = (void *)PMK8002_SUBTYPE }, ++ { .compatible = "qcom,smb2351", .data = (void *)SMB2351_SUBTYPE }, + { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, + { } + }; diff --git a/target/linux/ipq807x/patches-5.15/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch b/target/linux/ipq807x/patches-5.15/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch new file mode 100644 index 0000000000..35e0cc6725 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0058-v6.0-mfd-qcom-spmi-pmic-expose-the-PMIC-revid-information.patch @@ -0,0 +1,417 @@ +From 231f6a9f24a5e9b6e7af801ca2377970474cdf59 Mon Sep 17 00:00:00 2001 +From: Caleb Connolly +Date: Fri, 29 Apr 2022 23:08:57 +0100 +Subject: [PATCH] mfd: qcom-spmi-pmic: expose the PMIC revid information to + clients + +Some PMIC functions such as the RRADC need to be aware of the PMIC +chip revision information to implement errata or otherwise adjust +behaviour, export the PMIC information to enable this. + +This is specifically required to enable the RRADC to adjust +coefficients based on which chip fab the PMIC was produced in, +this can vary per unique device and therefore has to be read at +runtime. + +Signed-off-by: Caleb Connolly +Reviewed-by: Dmitry Baryshkov +Tested-by: Dmitry Baryshkov +Acked-by: Lee Jones +Link: https://lore.kernel.org/r/20220429220904.137297-3-caleb.connolly@linaro.org +Signed-off-by: Jonathan Cameron +--- + drivers/mfd/qcom-spmi-pmic.c | 265 ++++++++++++++++++++---------- + include/soc/qcom/qcom-spmi-pmic.h | 60 +++++++ + 2 files changed, 235 insertions(+), 90 deletions(-) + create mode 100644 include/soc/qcom/qcom-spmi-pmic.h + +--- a/drivers/mfd/qcom-spmi-pmic.c ++++ b/drivers/mfd/qcom-spmi-pmic.c +@@ -3,11 +3,16 @@ + * Copyright (c) 2014, The Linux Foundation. All rights reserved. + */ + ++#include ++#include ++#include + #include + #include + #include ++#include + #include + #include ++#include + + #define PMIC_REV2 0x101 + #define PMIC_REV3 0x102 +@@ -17,106 +22,140 @@ + + #define PMIC_TYPE_VALUE 0x51 + +-#define COMMON_SUBTYPE 0x00 +-#define PM8941_SUBTYPE 0x01 +-#define PM8841_SUBTYPE 0x02 +-#define PM8019_SUBTYPE 0x03 +-#define PM8226_SUBTYPE 0x04 +-#define PM8110_SUBTYPE 0x05 +-#define PMA8084_SUBTYPE 0x06 +-#define PMI8962_SUBTYPE 0x07 +-#define PMD9635_SUBTYPE 0x08 +-#define PM8994_SUBTYPE 0x09 +-#define PMI8994_SUBTYPE 0x0a +-#define PM8916_SUBTYPE 0x0b +-#define PM8004_SUBTYPE 0x0c +-#define PM8909_SUBTYPE 0x0d +-#define PM8028_SUBTYPE 0x0e +-#define PM8901_SUBTYPE 0x0f +-#define PM8950_SUBTYPE 0x10 +-#define PMI8950_SUBTYPE 0x11 +-#define PM8998_SUBTYPE 0x14 +-#define PMI8998_SUBTYPE 0x15 +-#define PM8005_SUBTYPE 0x18 +-#define PM660L_SUBTYPE 0x1A +-#define PM660_SUBTYPE 0x1B +-#define PM8150_SUBTYPE 0x1E +-#define PM8150L_SUBTYPE 0x1f +-#define PM8150B_SUBTYPE 0x20 +-#define PMK8002_SUBTYPE 0x21 +-#define PM8009_SUBTYPE 0x24 +-#define PM8150C_SUBTYPE 0x26 +-#define SMB2351_SUBTYPE 0x29 ++#define PMIC_REV4_V2 0x02 ++ ++struct qcom_spmi_dev { ++ int num_usids; ++ struct qcom_spmi_pmic pmic; ++}; ++ ++#define N_USIDS(n) ((void *)n) + + static const struct of_device_id pmic_spmi_id_table[] = { +- { .compatible = "qcom,pm660", .data = (void *)PM660_SUBTYPE }, +- { .compatible = "qcom,pm660l", .data = (void *)PM660L_SUBTYPE }, +- { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE }, +- { .compatible = "qcom,pm8005", .data = (void *)PM8005_SUBTYPE }, +- { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE }, +- { .compatible = "qcom,pm8028", .data = (void *)PM8028_SUBTYPE }, +- { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE }, +- { .compatible = "qcom,pm8150", .data = (void *)PM8150_SUBTYPE }, +- { .compatible = "qcom,pm8150b", .data = (void *)PM8150B_SUBTYPE }, +- { .compatible = "qcom,pm8150c", .data = (void *)PM8150C_SUBTYPE }, +- { .compatible = "qcom,pm8150l", .data = (void *)PM8150L_SUBTYPE }, +- { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE }, +- { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE }, +- { .compatible = "qcom,pm8901", .data = (void *)PM8901_SUBTYPE }, +- { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE }, +- { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE }, +- { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE }, +- { .compatible = "qcom,pm8950", .data = (void *)PM8950_SUBTYPE }, +- { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE }, +- { .compatible = "qcom,pm8998", .data = (void *)PM8998_SUBTYPE }, +- { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE }, +- { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE }, +- { .compatible = "qcom,pmi8950", .data = (void *)PMI8950_SUBTYPE }, +- { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE }, +- { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE }, +- { .compatible = "qcom,pmi8998", .data = (void *)PMI8998_SUBTYPE }, +- { .compatible = "qcom,pmk8002", .data = (void *)PMK8002_SUBTYPE }, +- { .compatible = "qcom,smb2351", .data = (void *)SMB2351_SUBTYPE }, +- { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE }, ++ { .compatible = "qcom,pm660", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm660l", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8004", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8005", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8019", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8028", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8110", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8150", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8150b", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8150c", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8150l", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8226", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8841", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8901", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8909", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8916", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8941", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8950", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8994", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pm8998", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pma8084", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmd9635", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmi8950", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmi8962", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmi8994", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmi8998", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmk8002", .data = N_USIDS(2) }, ++ { .compatible = "qcom,smb2351", .data = N_USIDS(2) }, ++ { .compatible = "qcom,spmi-pmic", .data = N_USIDS(1) }, + { } + }; + +-static void pmic_spmi_show_revid(struct regmap *map, struct device *dev) ++/* ++ * A PMIC can be represented by multiple SPMI devices, but ++ * only the base PMIC device will contain a reference to ++ * the revision information. ++ * ++ * This function takes a pointer to a pmic device and ++ * returns a pointer to the base PMIC device. ++ * ++ * This only supports PMICs with 1 or 2 USIDs. ++ */ ++static struct spmi_device *qcom_pmic_get_base_usid(struct device *dev) + { +- unsigned int rev2, minor, major, type, subtype; +- const char *name = "unknown"; +- int ret, i; ++ struct spmi_device *sdev; ++ struct qcom_spmi_dev *ctx; ++ struct device_node *spmi_bus; ++ struct device_node *other_usid = NULL; ++ int function_parent_usid, ret; ++ u32 pmic_addr; + +- ret = regmap_read(map, PMIC_TYPE, &type); +- if (ret < 0) +- return; ++ sdev = to_spmi_device(dev); ++ ctx = dev_get_drvdata(&sdev->dev); + +- if (type != PMIC_TYPE_VALUE) +- return; ++ /* ++ * Quick return if the function device is already in the base ++ * USID. This will always be hit for PMICs with only 1 USID. ++ */ ++ if (sdev->usid % ctx->num_usids == 0) ++ return sdev; + +- ret = regmap_read(map, PMIC_SUBTYPE, &subtype); ++ function_parent_usid = sdev->usid; ++ ++ /* ++ * Walk through the list of PMICs until we find the sibling USID. ++ * The goal is to find the first USID which is less than the ++ * number of USIDs in the PMIC array, e.g. for a PMIC with 2 USIDs ++ * where the function device is under USID 3, we want to find the ++ * device for USID 2. ++ */ ++ spmi_bus = of_get_parent(sdev->dev.of_node); ++ do { ++ other_usid = of_get_next_child(spmi_bus, other_usid); ++ ++ ret = of_property_read_u32_index(other_usid, "reg", 0, &pmic_addr); ++ if (ret) ++ return ERR_PTR(ret); ++ ++ sdev = spmi_device_from_of(other_usid); ++ if (pmic_addr == function_parent_usid - (ctx->num_usids - 1)) { ++ if (!sdev) ++ /* ++ * If the base USID for this PMIC hasn't probed yet ++ * but the secondary USID has, then we need to defer ++ * the function driver so that it will attempt to ++ * probe again when the base USID is ready. ++ */ ++ return ERR_PTR(-EPROBE_DEFER); ++ return sdev; ++ } ++ } while (other_usid->sibling); ++ ++ return ERR_PTR(-ENODATA); ++} ++ ++static int pmic_spmi_load_revid(struct regmap *map, struct device *dev, ++ struct qcom_spmi_pmic *pmic) ++{ ++ int ret; ++ ++ ret = regmap_read(map, PMIC_TYPE, &pmic->type); + if (ret < 0) +- return; ++ return ret; + +- for (i = 0; i < ARRAY_SIZE(pmic_spmi_id_table); i++) { +- if (subtype == (unsigned long)pmic_spmi_id_table[i].data) +- break; +- } ++ if (pmic->type != PMIC_TYPE_VALUE) ++ return ret; + +- if (i != ARRAY_SIZE(pmic_spmi_id_table)) +- name = pmic_spmi_id_table[i].compatible; ++ ret = regmap_read(map, PMIC_SUBTYPE, &pmic->subtype); ++ if (ret < 0) ++ return ret; + +- ret = regmap_read(map, PMIC_REV2, &rev2); ++ pmic->name = of_match_device(pmic_spmi_id_table, dev)->compatible; ++ ++ ret = regmap_read(map, PMIC_REV2, &pmic->rev2); + if (ret < 0) +- return; ++ return ret; + +- ret = regmap_read(map, PMIC_REV3, &minor); ++ ret = regmap_read(map, PMIC_REV3, &pmic->minor); + if (ret < 0) +- return; ++ return ret; + +- ret = regmap_read(map, PMIC_REV4, &major); ++ ret = regmap_read(map, PMIC_REV4, &pmic->major); + if (ret < 0) +- return; ++ return ret; + + /* + * In early versions of PM8941 and PM8226, the major revision number +@@ -124,15 +163,49 @@ static void pmic_spmi_show_revid(struct + * Increment the major revision number here if the chip is an early + * version of PM8941 or PM8226. + */ +- if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) && +- major < 0x02) +- major++; ++ if ((pmic->subtype == PM8941_SUBTYPE || pmic->subtype == PM8226_SUBTYPE) && ++ pmic->major < PMIC_REV4_V2) ++ pmic->major++; ++ ++ if (pmic->subtype == PM8110_SUBTYPE) ++ pmic->minor = pmic->rev2; ++ ++ dev_dbg(dev, "%x: %s v%d.%d\n", ++ pmic->subtype, pmic->name, pmic->major, pmic->minor); ++ ++ return 0; ++} ++ ++/** ++ * qcom_pmic_get() - Get a pointer to the base PMIC device ++ * ++ * This function takes a struct device for a driver which is a child of a PMIC. ++ * And locates the PMIC revision information for it. ++ * ++ * @dev: the pmic function device ++ * @return: the struct qcom_spmi_pmic* pointer associated with the function device ++ */ ++const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev) ++{ ++ struct spmi_device *sdev; ++ struct qcom_spmi_dev *spmi; ++ ++ /* ++ * Make sure the device is actually a child of a PMIC ++ */ ++ if (!of_match_device(pmic_spmi_id_table, dev->parent)) ++ return ERR_PTR(-EINVAL); ++ ++ sdev = qcom_pmic_get_base_usid(dev->parent); + +- if (subtype == PM8110_SUBTYPE) +- minor = rev2; ++ if (IS_ERR(sdev)) ++ return ERR_CAST(sdev); + +- dev_dbg(dev, "%x: %s v%d.%d\n", subtype, name, major, minor); ++ spmi = dev_get_drvdata(&sdev->dev); ++ ++ return &spmi->pmic; + } ++EXPORT_SYMBOL(qcom_pmic_get); + + static const struct regmap_config spmi_regmap_config = { + .reg_bits = 16, +@@ -144,14 +217,26 @@ static const struct regmap_config spmi_r + static int pmic_spmi_probe(struct spmi_device *sdev) + { + struct regmap *regmap; ++ struct qcom_spmi_dev *ctx; ++ int ret; + + regmap = devm_regmap_init_spmi_ext(sdev, &spmi_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + ++ ctx = devm_kzalloc(&sdev->dev, sizeof(*ctx), GFP_KERNEL); ++ if (!ctx) ++ return -ENOMEM; ++ ++ ctx->num_usids = (uintptr_t)of_device_get_match_data(&sdev->dev); ++ + /* Only the first slave id for a PMIC contains this information */ +- if (sdev->usid % 2 == 0) +- pmic_spmi_show_revid(regmap, &sdev->dev); ++ if (sdev->usid % ctx->num_usids == 0) { ++ ret = pmic_spmi_load_revid(regmap, &sdev->dev, &ctx->pmic); ++ if (ret < 0) ++ return ret; ++ } ++ spmi_device_set_drvdata(sdev, ctx); + + return devm_of_platform_populate(&sdev->dev); + } +--- /dev/null ++++ b/include/soc/qcom/qcom-spmi-pmic.h +@@ -0,0 +1,60 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++/* Copyright (c) 2022 Linaro. All rights reserved. ++ * Author: Caleb Connolly ++ */ ++ ++#ifndef __QCOM_SPMI_PMIC_H__ ++#define __QCOM_SPMI_PMIC_H__ ++ ++#include ++ ++#define COMMON_SUBTYPE 0x00 ++#define PM8941_SUBTYPE 0x01 ++#define PM8841_SUBTYPE 0x02 ++#define PM8019_SUBTYPE 0x03 ++#define PM8226_SUBTYPE 0x04 ++#define PM8110_SUBTYPE 0x05 ++#define PMA8084_SUBTYPE 0x06 ++#define PMI8962_SUBTYPE 0x07 ++#define PMD9635_SUBTYPE 0x08 ++#define PM8994_SUBTYPE 0x09 ++#define PMI8994_SUBTYPE 0x0a ++#define PM8916_SUBTYPE 0x0b ++#define PM8004_SUBTYPE 0x0c ++#define PM8909_SUBTYPE 0x0d ++#define PM8028_SUBTYPE 0x0e ++#define PM8901_SUBTYPE 0x0f ++#define PM8950_SUBTYPE 0x10 ++#define PMI8950_SUBTYPE 0x11 ++#define PM8998_SUBTYPE 0x14 ++#define PMI8998_SUBTYPE 0x15 ++#define PM8005_SUBTYPE 0x18 ++#define PM660L_SUBTYPE 0x1A ++#define PM660_SUBTYPE 0x1B ++#define PM8150_SUBTYPE 0x1E ++#define PM8150L_SUBTYPE 0x1f ++#define PM8150B_SUBTYPE 0x20 ++#define PMK8002_SUBTYPE 0x21 ++#define PM8009_SUBTYPE 0x24 ++#define PM8150C_SUBTYPE 0x26 ++#define SMB2351_SUBTYPE 0x29 ++ ++#define PMI8998_FAB_ID_SMIC 0x11 ++#define PMI8998_FAB_ID_GF 0x30 ++ ++#define PM660_FAB_ID_GF 0x0 ++#define PM660_FAB_ID_TSMC 0x2 ++#define PM660_FAB_ID_MX 0x3 ++ ++struct qcom_spmi_pmic { ++ unsigned int type; ++ unsigned int subtype; ++ unsigned int major; ++ unsigned int minor; ++ unsigned int rev2; ++ const char *name; ++}; ++ ++const struct qcom_spmi_pmic *qcom_pmic_get(struct device *dev); ++ ++#endif /* __QCOM_SPMI_PMIC_H__ */ diff --git a/target/linux/ipq807x/patches-5.15/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch b/target/linux/ipq807x/patches-5.15/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch new file mode 100644 index 0000000000..ecf8772bfd --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0059-v6.0-mfd-qcom-spmi-pmic-read-fab-id-on-supported-PMICs.patch @@ -0,0 +1,52 @@ +From 0c309f4e86c827cd5fd2eb0e36d5d1f19927380d Mon Sep 17 00:00:00 2001 +From: Caleb Connolly +Date: Fri, 29 Apr 2022 23:08:58 +0100 +Subject: [PATCH] mfd: qcom-spmi-pmic: read fab id on supported PMICs + +The PMI8998 and PM660 expose the fab_id, this is needed by drivers like +the RRADC to calibrate ADC values. + +Signed-off-by: Caleb Connolly +Reviewed-by: Dmitry Baryshkov +Tested-by: Dmitry Baryshkov +Acked-by: Lee Jones +Link: https://lore.kernel.org/r/20220429220904.137297-4-caleb.connolly@linaro.org +Signed-off-by: Jonathan Cameron +--- + drivers/mfd/qcom-spmi-pmic.c | 7 +++++++ + include/soc/qcom/qcom-spmi-pmic.h | 1 + + 2 files changed, 8 insertions(+) + +--- a/drivers/mfd/qcom-spmi-pmic.c ++++ b/drivers/mfd/qcom-spmi-pmic.c +@@ -19,6 +19,7 @@ + #define PMIC_REV4 0x103 + #define PMIC_TYPE 0x104 + #define PMIC_SUBTYPE 0x105 ++#define PMIC_FAB_ID 0x1f2 + + #define PMIC_TYPE_VALUE 0x51 + +@@ -157,6 +158,12 @@ static int pmic_spmi_load_revid(struct r + if (ret < 0) + return ret; + ++ if (pmic->subtype == PMI8998_SUBTYPE || pmic->subtype == PM660_SUBTYPE) { ++ ret = regmap_read(map, PMIC_FAB_ID, &pmic->fab_id); ++ if (ret < 0) ++ return ret; ++ } ++ + /* + * In early versions of PM8941 and PM8226, the major revision number + * started incrementing from 0 (eg 0 = v1.0, 1 = v2.0). +--- a/include/soc/qcom/qcom-spmi-pmic.h ++++ b/include/soc/qcom/qcom-spmi-pmic.h +@@ -52,6 +52,7 @@ struct qcom_spmi_pmic { + unsigned int major; + unsigned int minor; + unsigned int rev2; ++ unsigned int fab_id; + const char *name; + }; + diff --git a/target/linux/ipq807x/patches-5.15/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch b/target/linux/ipq807x/patches-5.15/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch new file mode 100644 index 0000000000..109a08aea3 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0060-v6.1-mfd-qcom-spmi-pmic-Add-support-for-PMP8074.patch @@ -0,0 +1,27 @@ +From 46878413ba10170aaa9b7c797816e928a11923e3 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:18:12 +0200 +Subject: [PATCH] mfd: qcom-spmi-pmic: Add support for PMP8074 + +Add support for PMP8074 PMIC which is a companion PMIC for the Qualcomm +IPQ8074 SoC-s. + +It shares the same subtype identifier as PM8901. + +Signed-off-by: Robert Marko +Signed-off-by: Lee Jones +Link: https://lore.kernel.org/r/20220818221815.346233-2-robimarko@gmail.com +--- + drivers/mfd/qcom-spmi-pmic.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/mfd/qcom-spmi-pmic.c ++++ b/drivers/mfd/qcom-spmi-pmic.c +@@ -60,6 +60,7 @@ static const struct of_device_id pmic_sp + { .compatible = "qcom,pmi8994", .data = N_USIDS(2) }, + { .compatible = "qcom,pmi8998", .data = N_USIDS(2) }, + { .compatible = "qcom,pmk8002", .data = N_USIDS(2) }, ++ { .compatible = "qcom,pmp8074", .data = N_USIDS(2) }, + { .compatible = "qcom,smb2351", .data = N_USIDS(2) }, + { .compatible = "qcom,spmi-pmic", .data = N_USIDS(1) }, + { } diff --git a/target/linux/ipq807x/patches-5.15/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch b/target/linux/ipq807x/patches-5.15/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch new file mode 100644 index 0000000000..b0dbe7d088 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0061-v6.0-regulator-qcom_spmi-add-support-for-HT_P150.patch @@ -0,0 +1,58 @@ +From dedc087d43013ab6043dd1da4cd585dd4242a6bb Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Mon, 4 Jul 2022 23:23:54 +0200 +Subject: [PATCH] regulator: qcom_spmi: add support for HT_P150 + +HT_P150 is a LDO PMOS regulator based on LV P150 using HFS430 layout +found in PMP8074 and PMS405 PMIC-s. + +Both PMP8074 and PMS405 define the programmable range as 1.616V to 3.304V +but the actual MAX output voltage depends on the exact LDO in each of +the PMIC-s. + +It has a max current of 150mA, voltage step of 8mV. + +Signed-off-by: Robert Marko +Link: https://lore.kernel.org/r/20220704212402.1715182-4-robimarko@gmail.com +Signed-off-by: Mark Brown +--- + drivers/regulator/qcom_spmi-regulator.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/drivers/regulator/qcom_spmi-regulator.c ++++ b/drivers/regulator/qcom_spmi-regulator.c +@@ -164,6 +164,7 @@ enum spmi_regulator_subtype { + SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3 = 0x0f, + SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4 = 0x10, + SPMI_REGULATOR_SUBTYPE_HFS430 = 0x0a, ++ SPMI_REGULATOR_SUBTYPE_HT_P150 = 0x35, + }; + + enum spmi_common_regulator_registers { +@@ -544,6 +545,10 @@ static struct spmi_voltage_range hfs430_ + SPMI_VOLTAGE_RANGE(0, 320000, 320000, 2040000, 2040000, 8000), + }; + ++static struct spmi_voltage_range ht_p150_ranges[] = { ++ SPMI_VOLTAGE_RANGE(0, 1616000, 1616000, 3304000, 3304000, 8000), ++}; ++ + static DEFINE_SPMI_SET_POINTS(pldo); + static DEFINE_SPMI_SET_POINTS(nldo1); + static DEFINE_SPMI_SET_POINTS(nldo2); +@@ -564,6 +569,7 @@ static DEFINE_SPMI_SET_POINTS(nldo660); + static DEFINE_SPMI_SET_POINTS(ht_lvpldo); + static DEFINE_SPMI_SET_POINTS(ht_nldo); + static DEFINE_SPMI_SET_POINTS(hfs430); ++static DEFINE_SPMI_SET_POINTS(ht_p150); + + static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf, + int len) +@@ -1458,6 +1464,7 @@ static const struct regulator_ops spmi_h + + static const struct spmi_regulator_mapping supported_regulators[] = { + /* type subtype dig_min dig_max ltype ops setpoints hpm_min */ ++ SPMI_VREG(LDO, HT_P150, 0, INF, HFS430, hfs430, ht_p150, 10000), + SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000), + SPMI_VREG(BUCK, HFS430, 0, INF, HFS430, hfs430, hfs430, 10000), + SPMI_VREG(LDO, N300, 0, INF, LDO, ldo, nldo1, 10000), diff --git a/target/linux/ipq807x/patches-5.15/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch b/target/linux/ipq807x/patches-5.15/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch new file mode 100644 index 0000000000..6b76f2c3fc --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0062-v6.0-regulator-qcom_spmi-add-support-for-HT_P600.patch @@ -0,0 +1,59 @@ +From 14789f38e03c42857613b69ff0f032e03653b246 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Mon, 4 Jul 2022 23:23:55 +0200 +Subject: [PATCH] regulator: qcom_spmi: add support for HT_P600 + +HT_P600 is a LDO PMOS regulator based on LV P600 using HFS430 layout +found in PMP8074 and PMS405 PMIC-s. + +Both PMP8074 and PMS405 define the programmable range as 1.704 to 1.896V +but the actual MAX output voltage depends on the exact LDO in each of +the PMIC-s. +Their usual voltage that they are used is 1.8V. + +It has a max current of 600mA, voltage step of 8mV. + +Signed-off-by: Robert Marko +Link: https://lore.kernel.org/r/20220704212402.1715182-5-robimarko@gmail.com +Signed-off-by: Mark Brown +--- + drivers/regulator/qcom_spmi-regulator.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/drivers/regulator/qcom_spmi-regulator.c ++++ b/drivers/regulator/qcom_spmi-regulator.c +@@ -165,6 +165,7 @@ enum spmi_regulator_subtype { + SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4 = 0x10, + SPMI_REGULATOR_SUBTYPE_HFS430 = 0x0a, + SPMI_REGULATOR_SUBTYPE_HT_P150 = 0x35, ++ SPMI_REGULATOR_SUBTYPE_HT_P600 = 0x3d, + }; + + enum spmi_common_regulator_registers { +@@ -549,6 +550,10 @@ static struct spmi_voltage_range ht_p150 + SPMI_VOLTAGE_RANGE(0, 1616000, 1616000, 3304000, 3304000, 8000), + }; + ++static struct spmi_voltage_range ht_p600_ranges[] = { ++ SPMI_VOLTAGE_RANGE(0, 1704000, 1704000, 1896000, 1896000, 8000), ++}; ++ + static DEFINE_SPMI_SET_POINTS(pldo); + static DEFINE_SPMI_SET_POINTS(nldo1); + static DEFINE_SPMI_SET_POINTS(nldo2); +@@ -570,6 +575,7 @@ static DEFINE_SPMI_SET_POINTS(ht_lvpldo) + static DEFINE_SPMI_SET_POINTS(ht_nldo); + static DEFINE_SPMI_SET_POINTS(hfs430); + static DEFINE_SPMI_SET_POINTS(ht_p150); ++static DEFINE_SPMI_SET_POINTS(ht_p600); + + static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf, + int len) +@@ -1464,6 +1470,7 @@ static const struct regulator_ops spmi_h + + static const struct spmi_regulator_mapping supported_regulators[] = { + /* type subtype dig_min dig_max ltype ops setpoints hpm_min */ ++ SPMI_VREG(LDO, HT_P600, 0, INF, HFS430, hfs430, ht_p600, 10000), + SPMI_VREG(LDO, HT_P150, 0, INF, HFS430, hfs430, ht_p150, 10000), + SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000), + SPMI_VREG(BUCK, HFS430, 0, INF, HFS430, hfs430, hfs430, 10000), diff --git a/target/linux/ipq807x/patches-5.15/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch b/target/linux/ipq807x/patches-5.15/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch new file mode 100644 index 0000000000..ce6985b13b --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0063-v6.0-regulator-qcom_spmi-add-support-for-PMP8074-regulato.patch @@ -0,0 +1,68 @@ +From 3e3da8da25f81fa3f0f3a37f60d10b17d1166864 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Mon, 4 Jul 2022 23:23:57 +0200 +Subject: [PATCH] regulator: qcom_spmi: add support for PMP8074 regulators + +PMP8074 is a companion PMIC for the Qualcomm IPQ8074 WiSoC-s. + +It features 5 HF-SMPS and 13 LDO regulators. + +HF-SMPS regulators are Buck HFS430 regulators. +L1, L2 and L3 are HT_N1200_ST subtype LDO regulators. +L4 is HT_N300_ST subtype LDO regulator. +L5 and L6 are HT_P600 subtype LDO regulators. +L7, L11, L12 and L13 are HT_P150 subtype LDO regulators. +L10 is HT_P50 subtype LDO regulator. + +This commit adds support for all of the buck regulators and LDO-s except +for L10 as I dont have documentation on its output voltage range. + +S3 is the CPU cluster voltage supply, S4 supplies the UBI32 NPU cores +and L11 is the SDIO/eMMC I/O voltage regulator required for high speeds. + +Signed-off-by: Robert Marko +Link: https://lore.kernel.org/r/20220704212402.1715182-7-robimarko@gmail.com +Signed-off-by: Mark Brown +--- + drivers/regulator/qcom_spmi-regulator.c | 23 +++++++++++++++++++++++ + 1 file changed, 23 insertions(+) + +--- a/drivers/regulator/qcom_spmi-regulator.c ++++ b/drivers/regulator/qcom_spmi-regulator.c +@@ -2101,6 +2101,28 @@ static const struct spmi_regulator_data + { } + }; + ++static const struct spmi_regulator_data pmp8074_regulators[] = { ++ { "s1", 0x1400, "vdd_s1"}, ++ { "s2", 0x1700, "vdd_s2"}, ++ { "s3", 0x1a00, "vdd_s3"}, ++ { "s4", 0x1d00, "vdd_s4"}, ++ { "s5", 0x2000, "vdd_s5"}, ++ { "l1", 0x4000, "vdd_l1_l2"}, ++ { "l2", 0x4100, "vdd_l1_l2"}, ++ { "l3", 0x4200, "vdd_l3_l8"}, ++ { "l4", 0x4300, "vdd_l4"}, ++ { "l5", 0x4400, "vdd_l5_l6_l15"}, ++ { "l6", 0x4500, "vdd_l5_l6_l15"}, ++ { "l7", 0x4600, "vdd_l7"}, ++ { "l8", 0x4700, "vdd_l3_l8"}, ++ { "l9", 0x4800, "vdd_l9"}, ++ /* l10 is currently unsupported HT_P50 */ ++ { "l11", 0x4a00, "vdd_l10_l11_l12_l13"}, ++ { "l12", 0x4b00, "vdd_l10_l11_l12_l13"}, ++ { "l13", 0x4c00, "vdd_l10_l11_l12_l13"}, ++ { } ++}; ++ + static const struct spmi_regulator_data pms405_regulators[] = { + { "s3", 0x1a00, "vdd_s3"}, + { } +@@ -2117,6 +2139,7 @@ static const struct of_device_id qcom_sp + { .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators }, + { .compatible = "qcom,pm660-regulators", .data = &pm660_regulators }, + { .compatible = "qcom,pm660l-regulators", .data = &pm660l_regulators }, ++ { .compatible = "qcom,pmp8074-regulators", .data = &pmp8074_regulators }, + { .compatible = "qcom,pms405-regulators", .data = &pms405_regulators }, + { } + }; diff --git a/target/linux/ipq807x/patches-5.15/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch b/target/linux/ipq807x/patches-5.15/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch new file mode 100644 index 0000000000..ba3d1750e1 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0064-v6.0-pinctrl-qcom-pmic-gpio-add-support-for-PMP8074.patch @@ -0,0 +1,25 @@ +From 204cd3516f59eb7040b814429187e674f49ba065 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Mon, 11 Jul 2022 22:34:05 +0200 +Subject: [PATCH] pinctrl: qcom-pmic-gpio: add support for PMP8074 + +PMP8074 has 12 GPIO-s with holes on GPIO1 and GPIO12. + +Signed-off-by: Robert Marko +Link: https://lore.kernel.org/r/20220711203408.2949888-4-robimarko@gmail.com +Signed-off-by: Linus Walleij +--- + drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c ++++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +@@ -1167,6 +1167,8 @@ static const struct of_device_id pmic_gp + { .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 }, + { .compatible = "qcom,pmk8350-gpio", .data = (void *) 4 }, + { .compatible = "qcom,pmm8155au-gpio", .data = (void *) 10 }, ++ /* pmp8074 has 12 GPIOs with holes on 1 and 12 */ ++ { .compatible = "qcom,pmp8074-gpio", .data = (void *) 12 }, + { .compatible = "qcom,pmr735a-gpio", .data = (void *) 4 }, + { .compatible = "qcom,pmr735b-gpio", .data = (void *) 4 }, + /* pms405 has 12 GPIOs with holes on 1, 9, and 10 */ diff --git a/target/linux/ipq807x/patches-5.15/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch b/target/linux/ipq807x/patches-5.15/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch new file mode 100644 index 0000000000..306f0dd253 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0065-v6.1-iio-adc-qcom-spmi-adc5-add-ADC5_VREF_VADC-to-rev2-AD.patch @@ -0,0 +1,26 @@ +From 41a02abb863edca0de0373bc3deaf0639b18c589 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:18:13 +0200 +Subject: [PATCH] iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5 + +Add support for ADC5_VREF_VADC channel to rev2 ADC5 channel list. +This channel measures the VADC reference LDO output. + +Signed-off-by: Robert Marko +Link: https://lore.kernel.org/r/20220818221815.346233-3-robimarko@gmail.com +Signed-off-by: Jonathan Cameron +--- + drivers/iio/adc/qcom-spmi-adc5.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/iio/adc/qcom-spmi-adc5.c ++++ b/drivers/iio/adc/qcom-spmi-adc5.c +@@ -589,6 +589,8 @@ static const struct adc5_channels adc5_c + SCALE_HW_CALIB_DEFAULT) + [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0, + SCALE_HW_CALIB_DEFAULT) ++ [ADC5_VREF_VADC] = ADC5_CHAN_VOLT("vref_vadc", 0, ++ SCALE_HW_CALIB_DEFAULT) + [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1, + SCALE_HW_CALIB_DEFAULT) + [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1, diff --git a/target/linux/ipq807x/patches-5.15/0066-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch b/target/linux/ipq807x/patches-5.15/0066-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch new file mode 100644 index 0000000000..cd146420cf --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0066-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch @@ -0,0 +1,149 @@ +From fb76b808f8628215afebaf0f8af0bde635302590 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:18:14 +0200 +Subject: [PATCH] arm64: dts: qcom: add PMP8074 DTSI + +PMP8074 is a companion PMIC to the Qualcomm IPQ8074 series that is +controlled via SPMI. + +Add DTSI for it providing GPIO, regulator, RTC and VADC support. + +RTC is disabled by default as there is no built-in battery so it will +loose time unless board vendor added a battery, so make it optional. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818221815.346233-4-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/pmp8074.dtsi | 125 ++++++++++++++++++++++++++ + 1 file changed, 125 insertions(+) + create mode 100644 arch/arm64/boot/dts/qcom/pmp8074.dtsi + +--- /dev/null ++++ b/arch/arm64/boot/dts/qcom/pmp8074.dtsi +@@ -0,0 +1,125 @@ ++// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause ++ ++#include ++#include ++ ++&spmi_bus { ++ pmic@0 { ++ compatible = "qcom,pmp8074", "qcom,spmi-pmic"; ++ reg = <0x0 SPMI_USID>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ pmp8074_adc: adc@3100 { ++ compatible = "qcom,spmi-adc-rev2"; ++ reg = <0x3100>; ++ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #io-channel-cells = <1>; ++ ++ ref-gnd@0 { ++ reg = ; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ vref-1p25@1 { ++ reg = ; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ vref-vadc@2 { ++ reg = ; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ pmic_die: die-temp@6 { ++ reg = ; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ xo_therm: xo-temp@76 { ++ reg = ; ++ qcom,ratiometric; ++ qcom,hw-settle-time = <200>; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ pa_therm1: thermistor1@77 { ++ reg = ; ++ qcom,ratiometric; ++ qcom,hw-settle-time = <200>; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ pa_therm2: thermistor2@78 { ++ reg = ; ++ qcom,ratiometric; ++ qcom,hw-settle-time = <200>; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ pa_therm3: thermistor3@79 { ++ reg = ; ++ qcom,ratiometric; ++ qcom,hw-settle-time = <200>; ++ qcom,pre-scaling = <1 1>; ++ }; ++ ++ vph-pwr@131 { ++ reg = ; ++ qcom,pre-scaling = <1 3>; ++ }; ++ }; ++ ++ pmp8074_rtc: rtc@6000 { ++ compatible = "qcom,pm8941-rtc"; ++ reg = <0x6000>; ++ reg-names = "rtc", "alarm"; ++ interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; ++ allow-set-time; ++ status = "disabled"; ++ }; ++ ++ pmp8074_gpios: gpio@c000 { ++ compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio"; ++ reg = <0xc000>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-ranges = <&pmp8074_gpios 0 0 12>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ }; ++ ++ pmic@1 { ++ compatible = "qcom,pmp8074", "qcom,spmi-pmic"; ++ reg = <0x1 SPMI_USID>; ++ ++ regulators { ++ compatible = "qcom,pmp8074-regulators"; ++ ++ s3: s3 { ++ regulator-name = "vdd_s3"; ++ regulator-min-microvolt = <592000>; ++ regulator-max-microvolt = <1064000>; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ s4: s4 { ++ regulator-name = "vdd_s4"; ++ regulator-min-microvolt = <712000>; ++ regulator-max-microvolt = <992000>; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ l11: l11 { ++ regulator-name = "l11"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ }; ++ }; ++}; diff --git a/target/linux/ipq807x/patches-5.15/0067-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch b/target/linux/ipq807x/patches-5.15/0067-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch new file mode 100644 index 0000000000..af65c0c979 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0067-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch @@ -0,0 +1,37 @@ +From 2c394cfc1779886048feca7dc7f4075da5f6328c Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 19 Aug 2022 00:18:15 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074-hk01: add VQMMC supply + +Since now we have control over the PMP8074 PMIC providing various system +voltages including L11 which provides the SDIO/eMMC I/O voltage set it as +the SDHCI VQMMC supply. + +This allows SDHCI controller to switch to 1.8V I/O mode and support high +speed modes like HS200 and HS400. + +Signed-off-by: Robert Marko +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220818221815.346233-5-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +@@ -3,6 +3,7 @@ + /* Copyright (c) 2017, The Linux Foundation. All rights reserved. + */ + #include "ipq8074.dtsi" ++#include "pmp8074.dtsi" + + / { + model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; +@@ -82,6 +83,7 @@ + + &sdhc_1 { + status = "okay"; ++ vqmmc-supply = <&l11>; + }; + + &qusb_phy_0 { diff --git a/target/linux/ipq807x/patches-5.15/0068-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch b/target/linux/ipq807x/patches-5.15/0068-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch new file mode 100644 index 0000000000..829e2278a0 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0068-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch @@ -0,0 +1,42 @@ +From 82ceb86227b1fc15c76d5fc691b2bf425f1a63b3 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Mon, 7 Nov 2022 10:29:30 +0100 +Subject: [PATCH] arm64: dts: qcom: hk01: use GPIO flags for tlmm + +Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of +harcoding the cell value. + +Signed-off-by: Robert Marko +Reviewed-by: Krzysztof Kozlowski +Reviewed-by: Konrad Dybcio +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221107092930.33325-3-robimarko@gmail.com +--- + arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +@@ -4,6 +4,7 @@ + */ + #include "ipq8074.dtsi" + #include "pmp8074.dtsi" ++#include + + / { + model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; +@@ -50,12 +51,12 @@ + + &pcie0 { + status = "okay"; +- perst-gpios = <&tlmm 61 0x1>; ++ perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; + }; + + &pcie1 { + status = "okay"; +- perst-gpios = <&tlmm 58 0x1>; ++ perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + }; + + &pcie_phy0 { diff --git a/target/linux/ipq807x/patches-5.15/0069-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch b/target/linux/ipq807x/patches-5.15/0069-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch new file mode 100644 index 0000000000..a8bf2492f4 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0069-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch @@ -0,0 +1,82 @@ +From 1b1c1423ca3e740984aa883512a72c4ea08fbe28 Mon Sep 17 00:00:00 2001 +From: Konrad Dybcio +Date: Mon, 7 Nov 2022 15:55:17 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074-*: Fix up comments + +Make sure all multiline C-style commends begin with just '/*' with +the comment text starting on a new line. + +Also, fix up some whitespace within comments. + +Signed-off-by: Konrad Dybcio +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221107145522.6706-8-konrad.dybcio@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 3 ++- + arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts | 3 ++- + arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts | 3 ++- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 12 ++++++------ + 4 files changed, 12 insertions(+), 9 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +@@ -1,6 +1,7 @@ + // SPDX-License-Identifier: GPL-2.0-only + /dts-v1/; +-/* Copyright (c) 2017, The Linux Foundation. All rights reserved. ++/* ++ * Copyright (c) 2017, The Linux Foundation. All rights reserved. + */ + #include "ipq8074.dtsi" + #include "pmp8074.dtsi" +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts +@@ -1,5 +1,6 @@ + // SPDX-License-Identifier: GPL-2.0-only +-/* Copyright (c) 2020 The Linux Foundation. All rights reserved. ++/* ++ * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + /dts-v1/; + +--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts ++++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts +@@ -1,6 +1,7 @@ + // SPDX-License-Identifier: GPL-2.0-only + /dts-v1/; +-/* Copyright (c) 2020 The Linux Foundation. All rights reserved. ++/* ++ * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + #include "ipq8074-hk10.dtsi" + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -129,10 +129,10 @@ + status = "disabled"; + + usb1_ssphy: phy@58200 { +- reg = <0x00058200 0x130>, /* Tx */ ++ reg = <0x00058200 0x130>, /* Tx */ + <0x00058400 0x200>, /* Rx */ +- <0x00058800 0x1f8>, /* PCS */ +- <0x00058600 0x044>; /* PCS misc*/ ++ <0x00058800 0x1f8>, /* PCS */ ++ <0x00058600 0x044>; /* PCS misc */ + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB1_PIPE_CLK>; +@@ -172,10 +172,10 @@ + status = "disabled"; + + usb0_ssphy: phy@78200 { +- reg = <0x00078200 0x130>, /* Tx */ ++ reg = <0x00078200 0x130>, /* Tx */ + <0x00078400 0x200>, /* Rx */ +- <0x00078800 0x1f8>, /* PCS */ +- <0x00078600 0x044>; /* PCS misc*/ ++ <0x00078800 0x1f8>, /* PCS */ ++ <0x00078600 0x044>; /* PCS misc */ + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; diff --git a/target/linux/ipq807x/patches-5.15/0070-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch b/target/linux/ipq807x/patches-5.15/0070-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch new file mode 100644 index 0000000000..81cd035804 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0070-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch @@ -0,0 +1,60 @@ +From 5f20690f77878b1ba24ec88df01b92d5131a6780 Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski +Date: Tue, 8 Nov 2022 15:23:57 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: align TLMM pin configuration with + DT schema + +DT schema expects TLMM pin configuration nodes to be named with +'-state' suffix and their optional children with '-pins' suffix. + +Signed-off-by: Krzysztof Kozlowski +Reviewed-by: Konrad Dybcio +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20221108142357.67202-2-krzysztof.kozlowski@linaro.org +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -317,35 +317,35 @@ + interrupt-controller; + #interrupt-cells = <0x2>; + +- serial_4_pins: serial4-pinmux { ++ serial_4_pins: serial4-state { + pins = "gpio23", "gpio24"; + function = "blsp4_uart1"; + drive-strength = <8>; + bias-disable; + }; + +- i2c_0_pins: i2c-0-pinmux { ++ i2c_0_pins: i2c-0-state { + pins = "gpio42", "gpio43"; + function = "blsp1_i2c"; + drive-strength = <8>; + bias-disable; + }; + +- spi_0_pins: spi-0-pins { ++ spi_0_pins: spi-0-state { + pins = "gpio38", "gpio39", "gpio40", "gpio41"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; + +- hsuart_pins: hsuart-pins { ++ hsuart_pins: hsuart-state { + pins = "gpio46", "gpio47", "gpio48", "gpio49"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + +- qpic_pins: qpic-pins { ++ qpic_pins: qpic-state { + pins = "gpio1", "gpio3", "gpio4", + "gpio5", "gpio6", "gpio7", + "gpio8", "gpio10", "gpio11", diff --git a/target/linux/ipq807x/patches-5.15/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch b/target/linux/ipq807x/patches-5.15/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch new file mode 100644 index 0000000000..ed1b063972 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0071-v5.16-soc-qcom-socinfo-Add-IPQ8074-family-ID-s.patch @@ -0,0 +1,50 @@ +From a212eb94fc9f72a126df651c5d7898feaea29526 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sun, 5 Sep 2021 19:11:31 +0200 +Subject: [PATCH] soc: qcom: socinfo: Add IPQ8074 family ID-s + +IPQ8074 family SoC ID-s are missing, so lets add them based on +the downstream driver. + +Signed-off-by: Robert Marko +Reviewed-by: Kathiravan T +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20210905171131.660885-1-robimarko@gmail.com +--- + drivers/soc/qcom/socinfo.c | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +--- a/drivers/soc/qcom/socinfo.c ++++ b/drivers/soc/qcom/socinfo.c +@@ -281,19 +281,31 @@ static const struct soc_id soc_id[] = { + { 319, "APQ8098" }, + { 321, "SDM845" }, + { 322, "MDM9206" }, ++ { 323, "IPQ8074" }, + { 324, "SDA660" }, + { 325, "SDM658" }, + { 326, "SDA658" }, + { 327, "SDA630" }, + { 338, "SDM450" }, + { 341, "SDA845" }, ++ { 342, "IPQ8072" }, ++ { 343, "IPQ8076" }, ++ { 344, "IPQ8078" }, + { 345, "SDM636" }, + { 346, "SDA636" }, + { 349, "SDM632" }, + { 350, "SDA632" }, + { 351, "SDA450" }, + { 356, "SM8250" }, ++ { 375, "IPQ8070" }, ++ { 376, "IPQ8071" }, ++ { 389, "IPQ8072A" }, ++ { 390, "IPQ8074A" }, ++ { 391, "IPQ8076A" }, ++ { 392, "IPQ8078A" }, + { 394, "SM6125" }, ++ { 395, "IPQ8070A" }, ++ { 396, "IPQ8071A" }, + { 402, "IPQ6018" }, + { 403, "IPQ6028" }, + { 421, "IPQ6000" }, diff --git a/target/linux/ipq807x/patches-5.15/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch b/target/linux/ipq807x/patches-5.15/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch new file mode 100644 index 0000000000..fddc82ed35 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0072-v6.0-phy-qcom-qmp-pcie-make-pipe-clock-rate-configurable.patch @@ -0,0 +1,47 @@ +From 2b0fe9137aa32d7fc367bf3a1cef4fa97ece6d58 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Tue, 23 Aug 2022 22:43:51 +0200 +Subject: [PATCH] phy: qcom-qmp-pcie: make pipe clock rate configurable + +IPQ8074 Gen3 PCIe PHY uses 250MHz as the pipe clock rate instead of 125MHz +like every other PCIe QMP PHY does, so make it configurable as part of the +qmp_phy_cfg. + +Signed-off-by: Robert Marko +Reviewed-by: Dmitry Baryshkov +Link: https://lore.kernel.org/r/20220621195512.1760362-1-robimarko@gmail.com +Signed-off-by: Vinod Koul +--- + drivers/phy/qualcomm/phy-qcom-qmp.c | 14 ++++++++++++-- + 1 file changed, 12 insertions(+), 2 deletions(-) + +--- a/drivers/phy/qualcomm/phy-qcom-qmp.c ++++ b/drivers/phy/qualcomm/phy-qcom-qmp.c +@@ -2842,6 +2842,9 @@ struct qmp_phy_cfg { + /* true, if PHY has secondary tx/rx lanes to be configured */ + bool is_dual_lane_phy; + ++ /* QMP PHY pipe clock interface rate */ ++ unsigned long pipe_clock_rate; ++ + /* true, if PCS block has no separate SW_RESET register */ + bool no_pcs_sw_reset; + }; +@@ -5138,8 +5141,15 @@ static int phy_pipe_clk_register(struct + + init.ops = &clk_fixed_rate_ops; + +- /* controllers using QMP phys use 125MHz pipe clock interface */ +- fixed->fixed_rate = 125000000; ++ /* ++ * Controllers using QMP PHY-s use 125MHz pipe clock interface ++ * unless other frequency is specified in the PHY config. ++ */ ++ if (qmp->phys[0]->cfg->pipe_clock_rate) ++ fixed->fixed_rate = qmp->phys[0]->cfg->pipe_clock_rate; ++ else ++ fixed->fixed_rate = 125000000; ++ + fixed->hw.init = &init; + + ret = devm_clk_hw_register(qmp->dev, &fixed->hw); diff --git a/target/linux/ipq807x/patches-5.15/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch b/target/linux/ipq807x/patches-5.15/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch new file mode 100644 index 0000000000..c915619360 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0073-v6.0-phy-qcom-qmp-pcie-add-IPQ8074-PCIe-Gen3-QMP-PHY-supp.patch @@ -0,0 +1,200 @@ +From 23bd21d8c05109b57aa9508e88fbdbc2b6d33de7 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Tue, 23 Aug 2022 22:47:40 +0200 +Subject: [PATCH] phy: qcom-qmp-pcie: add IPQ8074 PCIe Gen3 QMP PHY support + +IPQ8074 has 2 different single lane PCIe PHY-s, one Gen2 and one Gen3. +Gen2 one is already supported, so add the support for the Gen3 one. +It uses the same register layout as IPQ6018. + +Signed-off-by: Robert Marko +Reviewed-by: Dmitry Baryshkov +Link: https://lore.kernel.org/r/20220621195512.1760362-3-robimarko@gmail.com +Signed-off-by: Vinod Koul +--- + drivers/phy/qualcomm/phy-qcom-qmp.c | 160 ++++++++++++++++++++++++++++ + 1 file changed, 160 insertions(+) + +--- a/drivers/phy/qualcomm/phy-qcom-qmp.c ++++ b/drivers/phy/qualcomm/phy-qcom-qmp.c +@@ -812,6 +812,133 @@ static const struct qmp_phy_init_tbl ipq + QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3), + }; + ++static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_serdes_tbl[] = { ++ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x31), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x01), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_MAP, 0x04), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_TIMER1, 0xff), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_TIMER2, 0x3f), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x30), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x21), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x82), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x03), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0x355), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0x35555), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x1a), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0x1a0a), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0xb), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE0, 0x0), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0x40), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x20), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV, 0xa), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TIMER, 0xa), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x1), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x68), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x2), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x2aa), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x2aaab), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x34), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0x3414), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x0b), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE1, 0x0), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0x40), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x0), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_EP_DIV_MODE0, 0x19), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_EP_DIV_MODE1, 0x28), ++ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90), ++}; ++ ++static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_tx_tbl[] = { ++ QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02), ++ QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12), ++ QMP_PHY_INIT_CFG(QSERDES_TX0_HIGHZ_DRVR_EN, 0x10), ++ QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06), ++}; ++ ++static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_rx_tbl[] = { ++ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0xe), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x4), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1b), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x2), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c), ++ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02), ++}; ++ ++static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_pcs_tbl[] = { ++ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL2, 0x83), ++ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNT_VAL_L, 0x9), ++ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNT_VAL_H_TOL, 0x42), ++ QMP_PHY_INIT_CFG(PCS_COM_FLL_MAN_CODE, 0x40), ++ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01), ++ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_H, 0x0), ++ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x1), ++ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x0), ++ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_H, 0x00), ++ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01), ++ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_H, 0x00), ++ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01), ++ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11), ++ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG2, 0xb), ++ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07), ++ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_CONFIG2, 0x52), ++ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG2, 0x50), ++ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG4, 0x1a), ++ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x6), ++ QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10), ++ QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1), ++ QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01), ++ QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa), ++ QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d), ++}; ++ + static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), +@@ -3167,6 +3294,36 @@ static const struct qmp_phy_cfg ipq8074_ + .pwrdn_delay_max = 1005, /* us */ + }; + ++static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = { ++ .type = PHY_TYPE_PCIE, ++ .nlanes = 1, ++ ++ .serdes_tbl = ipq8074_pcie_gen3_serdes_tbl, ++ .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_serdes_tbl), ++ .tx_tbl = ipq8074_pcie_gen3_tx_tbl, ++ .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_tx_tbl), ++ .rx_tbl = ipq8074_pcie_gen3_rx_tbl, ++ .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_rx_tbl), ++ .pcs_tbl = ipq8074_pcie_gen3_pcs_tbl, ++ .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_pcs_tbl), ++ .clk_list = ipq8074_pciephy_clk_l, ++ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l), ++ .reset_list = ipq8074_pciephy_reset_l, ++ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), ++ .vreg_list = NULL, ++ .num_vregs = 0, ++ .regs = ipq_pciephy_gen3_regs_layout, ++ ++ .start_ctrl = SERDES_START | PCS_START, ++ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, ++ ++ .has_pwrdn_delay = true, ++ .pwrdn_delay_min = 995, /* us */ ++ .pwrdn_delay_max = 1005, /* us */ ++ ++ .pipe_clock_rate = 250000000, ++}; ++ + static const struct qmp_phy_cfg ipq6018_pciephy_cfg = { + .type = PHY_TYPE_PCIE, + .nlanes = 1, +@@ -5543,6 +5700,9 @@ static const struct of_device_id qcom_qm + .compatible = "qcom,ipq8074-qmp-pcie-phy", + .data = &ipq8074_pciephy_cfg, + }, { ++ .compatible = "qcom,ipq8074-qmp-gen3-pcie-phy", ++ .data = &ipq8074_pciephy_gen3_cfg, ++ }, { + .compatible = "qcom,ipq6018-qmp-pcie-phy", + .data = &ipq6018_pciephy_cfg, + }, { diff --git a/target/linux/ipq807x/patches-5.15/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch b/target/linux/ipq807x/patches-5.15/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch new file mode 100644 index 0000000000..626507abb2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0074-v6.0-PCI-dwc-Move-GEN3_RELATED-DBI-definitions-to-common-.patch @@ -0,0 +1,46 @@ +From 8df9fefd1d04f6f97f6015d7347104f69e6ea580 Mon Sep 17 00:00:00 2001 +From: Baruch Siach +Date: Tue, 21 Jun 2022 11:54:52 +0300 +Subject: [PATCH] PCI: dwc: Move GEN3_RELATED DBI definitions to common header + +These are common dwc macros that will be used for other platforms. + +Link: https://lore.kernel.org/r/1c2d5a7a139be81fa15f356b2380163dbdebdc09.1655799816.git.baruch@tkos.co.il +Signed-off-by: Baruch Siach +Signed-off-by: Bjorn Helgaas +Reviewed-by: Rob Herring +--- + drivers/pci/controller/dwc/pcie-designware.h | 6 ++++++ + drivers/pci/controller/dwc/pcie-tegra194.c | 6 ------ + 2 files changed, 6 insertions(+), 6 deletions(-) + +--- a/drivers/pci/controller/dwc/pcie-designware.h ++++ b/drivers/pci/controller/dwc/pcie-designware.h +@@ -74,6 +74,12 @@ + #define PCIE_MSI_INTR0_MASK 0x82C + #define PCIE_MSI_INTR0_STATUS 0x830 + ++#define GEN3_RELATED_OFF 0x890 ++#define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0) ++#define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) ++#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 ++#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) ++ + #define PCIE_PORT_MULTI_LANE_CTRL 0x8C0 + #define PORT_MLTI_UPCFG_SUPPORT BIT(7) + +--- a/drivers/pci/controller/dwc/pcie-tegra194.c ++++ b/drivers/pci/controller/dwc/pcie-tegra194.c +@@ -193,12 +193,6 @@ + #define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_MASK GENMASK(23, 8) + #define GEN3_EQ_CONTROL_OFF_FB_MODE_MASK GENMASK(3, 0) + +-#define GEN3_RELATED_OFF 0x890 +-#define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0) +-#define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) +-#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 +-#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) +- + #define PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT 0x8D0 + #define AMBA_ERROR_RESPONSE_CRS_SHIFT 3 + #define AMBA_ERROR_RESPONSE_CRS_MASK GENMASK(1, 0) diff --git a/target/linux/ipq807x/patches-5.15/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch b/target/linux/ipq807x/patches-5.15/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch new file mode 100644 index 0000000000..bc1464b126 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0075-v6.0-PCI-qcom-Define-slot-capabilities-using-PCI_EXP_SLTC.patch @@ -0,0 +1,51 @@ +From d568739f1c21e1768a887ff85611769f782eb64f Mon Sep 17 00:00:00 2001 +From: Baruch Siach +Date: Tue, 21 Jun 2022 11:54:53 +0300 +Subject: [PATCH] PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_* + +The PCIE_CAP_LINK1_VAL macro actually defines slot capabilities. Use +PCI_EXP_SLTCAP_* macros to spell its value, and rename it to better +describe its meaning. + +Link: https://lore.kernel.org/r/3025d5e1d8da64798db6958f9780c4763fbcac47.1655799816.git.baruch@tkos.co.il +Signed-off-by: Baruch Siach +Signed-off-by: Bjorn Helgaas +Reviewed-by: Rob Herring +Acked-by: Stanimir Varbanov +--- + drivers/pci/controller/dwc/pcie-qcom.c | 17 +++++++++++++++-- + 1 file changed, 15 insertions(+), 2 deletions(-) + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -69,7 +69,20 @@ + #define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c + #define CFG_BRIDGE_SB_INIT BIT(0) + +-#define PCIE_CAP_LINK1_VAL 0x2FD7F ++#define PCIE_CAP_SLOT_POWER_LIMIT_VAL FIELD_PREP(PCI_EXP_SLTCAP_SPLV, \ ++ 250) ++#define PCIE_CAP_SLOT_POWER_LIMIT_SCALE FIELD_PREP(PCI_EXP_SLTCAP_SPLS, \ ++ 1) ++#define PCIE_CAP_SLOT_VAL (PCI_EXP_SLTCAP_ABP | \ ++ PCI_EXP_SLTCAP_PCP | \ ++ PCI_EXP_SLTCAP_MRLSP | \ ++ PCI_EXP_SLTCAP_AIP | \ ++ PCI_EXP_SLTCAP_PIP | \ ++ PCI_EXP_SLTCAP_HPS | \ ++ PCI_EXP_SLTCAP_HPC | \ ++ PCI_EXP_SLTCAP_EIP | \ ++ PCIE_CAP_SLOT_POWER_LIMIT_VAL | \ ++ PCIE_CAP_SLOT_POWER_LIMIT_SCALE) + + #define PCIE20_PARF_Q2A_FLUSH 0x1AC + +@@ -1125,7 +1138,7 @@ static int qcom_pcie_post_init_2_3_3(str + + writel(PCI_COMMAND_MASTER, pci->dbi_base + PCI_COMMAND); + writel(DBI_RO_WR_EN, pci->dbi_base + PCIE20_MISC_CONTROL_1_REG); +- writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); ++ writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); + + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); + val &= ~PCI_EXP_LNKCAP_ASPMS; diff --git a/target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch b/target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch new file mode 100644 index 0000000000..817a3c64c9 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch @@ -0,0 +1,122 @@ +From 180ce25d5c3ccff206f084b7ab350778641d1b1c Mon Sep 17 00:00:00 2001 +From: Prasad Malisetty +Date: Thu, 7 Oct 2021 23:18:42 +0530 +Subject: [PATCH] PCI: qcom: Replace ops with struct pcie_cfg in pcie match + data + +Add struct qcom_pcie_cfg as match data for all platforms. Assign +appropriate platform ops into struct qcom_pcie_cfg and read using +of_device_get_match_data() in qcom_pcie_probe(). + +Link: https://lore.kernel.org/r/1633628923-25047-5-git-send-email-pmaliset@codeaurora.org +Signed-off-by: Prasad Malisetty +Signed-off-by: Lorenzo Pieralisi +Signed-off-by: Bjorn Helgaas +Reviewed-by: Stephen Boyd +--- + drivers/pci/controller/dwc/pcie-qcom.c | 66 +++++++++++++++++++++----- + 1 file changed, 55 insertions(+), 11 deletions(-) + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -202,6 +202,10 @@ struct qcom_pcie_ops { + int (*config_sid)(struct qcom_pcie *pcie); + }; + ++struct qcom_pcie_cfg { ++ const struct qcom_pcie_ops *ops; ++}; ++ + struct qcom_pcie { + struct dw_pcie *pci; + void __iomem *parf; /* DT parf */ +@@ -1469,6 +1473,38 @@ static const struct qcom_pcie_ops ops_1_ + .config_sid = qcom_pcie_config_sid_sm8250, + }; + ++static const struct qcom_pcie_cfg apq8084_cfg = { ++ .ops = &ops_1_0_0, ++}; ++ ++static const struct qcom_pcie_cfg ipq8064_cfg = { ++ .ops = &ops_2_1_0, ++}; ++ ++static const struct qcom_pcie_cfg msm8996_cfg = { ++ .ops = &ops_2_3_2, ++}; ++ ++static const struct qcom_pcie_cfg ipq8074_cfg = { ++ .ops = &ops_2_3_3, ++}; ++ ++static const struct qcom_pcie_cfg ipq4019_cfg = { ++ .ops = &ops_2_4_0, ++}; ++ ++static const struct qcom_pcie_cfg sdm845_cfg = { ++ .ops = &ops_2_7_0, ++}; ++ ++static const struct qcom_pcie_cfg sm8250_cfg = { ++ .ops = &ops_1_9_0, ++}; ++ ++static const struct qcom_pcie_cfg sc7280_cfg = { ++ .ops = &ops_1_9_0, ++}; ++ + static const struct dw_pcie_ops dw_pcie_ops = { + .link_up = qcom_pcie_link_up, + .start_link = qcom_pcie_start_link, +@@ -1480,6 +1516,7 @@ static int qcom_pcie_probe(struct platfo + struct pcie_port *pp; + struct dw_pcie *pci; + struct qcom_pcie *pcie; ++ const struct qcom_pcie_cfg *pcie_cfg; + int ret; + + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); +@@ -1501,7 +1538,13 @@ static int qcom_pcie_probe(struct platfo + + pcie->pci = pci; + +- pcie->ops = of_device_get_match_data(dev); ++ pcie_cfg = of_device_get_match_data(dev); ++ if (!pcie_cfg || !pcie_cfg->ops) { ++ dev_err(dev, "Invalid platform data\n"); ++ return -EINVAL; ++ } ++ ++ pcie->ops = pcie_cfg->ops; + + pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); + if (IS_ERR(pcie->reset)) { +@@ -1557,16 +1600,17 @@ err_pm_runtime_put: + } + + static const struct of_device_id qcom_pcie_match[] = { +- { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, +- { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, +- { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 }, +- { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 }, +- { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 }, +- { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 }, +- { .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 }, +- { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 }, +- { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 }, +- { .compatible = "qcom,pcie-sm8250", .data = &ops_1_9_0 }, ++ { .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg }, ++ { .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg }, ++ { .compatible = "qcom,pcie-ipq8064-v2", .data = &ipq8064_cfg }, ++ { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, ++ { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, ++ { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, ++ { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, ++ { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, ++ { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, ++ { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, ++ { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, + { } + }; + diff --git a/target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch b/target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch new file mode 100644 index 0000000000..6881ed6d25 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch @@ -0,0 +1,220 @@ +From a7d96ca20847ade9f29cff4521f43b8ae968b3df Mon Sep 17 00:00:00 2001 +From: Selvam Sathappan Periakaruppan +Date: Tue, 21 Jun 2022 11:54:54 +0300 +Subject: [PATCH] PCI: qcom: Add IPQ60xx support + +IPQ60xx series of SoCs have one port of PCIe gen 3. Add support for that +platform. + +The code is based on downstream[1] Codeaurora kernel v5.4 (branch +win.linuxopenwrt.2.0). + +Split out the DBI registers access part from .init into .post_init. DBI +registers are only accessible after phy_power_on(). + +[1] https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/ + +Link: https://lore.kernel.org/r/f7f848653c99abbf9a0f877949a44e52329543ae.1655799816.git.baruch@tkos.co.il +Tested-by: Robert Marko +Signed-off-by: Selvam Sathappan Periakaruppan +Signed-off-by: Baruch Siach +Signed-off-by: Bjorn Helgaas +Reviewed-by: Rob Herring +Reviewed-by: Johan Hovold +Acked-by: Stanimir Varbanov +--- + drivers/pci/controller/dwc/pcie-designware.h | 1 + + drivers/pci/controller/dwc/pcie-qcom.c | 130 +++++++++++++++++++ + 2 files changed, 131 insertions(+) + +--- a/drivers/pci/controller/dwc/pcie-designware.h ++++ b/drivers/pci/controller/dwc/pcie-designware.h +@@ -76,6 +76,7 @@ + + #define GEN3_RELATED_OFF 0x890 + #define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0) ++#define GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS BIT(13) + #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16) + #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24 + #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24) +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -52,6 +52,10 @@ + #define PCIE20_PARF_DBI_BASE_ADDR 0x168 + #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C + #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 ++#define AHB_CLK_EN BIT(0) ++#define MSTR_AXI_CLK_EN BIT(1) ++#define BYPASS BIT(4) ++ + #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 + #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8 + #define PCIE20_PARF_LTSSM 0x1B0 +@@ -181,6 +185,11 @@ struct qcom_pcie_resources_2_7_0 { + struct clk *pipe_clk; + }; + ++struct qcom_pcie_resources_2_9_0 { ++ struct clk_bulk_data clks[5]; ++ struct reset_control *rst; ++}; ++ + union qcom_pcie_resources { + struct qcom_pcie_resources_1_0_0 v1_0_0; + struct qcom_pcie_resources_2_1_0 v2_1_0; +@@ -188,6 +197,7 @@ union qcom_pcie_resources { + struct qcom_pcie_resources_2_3_3 v2_3_3; + struct qcom_pcie_resources_2_4_0 v2_4_0; + struct qcom_pcie_resources_2_7_0 v2_7_0; ++ struct qcom_pcie_resources_2_9_0 v2_9_0; + }; + + struct qcom_pcie; +@@ -1282,6 +1292,112 @@ static void qcom_pcie_post_deinit_2_7_0( + clk_disable_unprepare(res->pipe_clk); + } + ++static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; ++ struct dw_pcie *pci = pcie->pci; ++ struct device *dev = pci->dev; ++ int ret; ++ ++ res->clks[0].id = "iface"; ++ res->clks[1].id = "axi_m"; ++ res->clks[2].id = "axi_s"; ++ res->clks[3].id = "axi_bridge"; ++ res->clks[4].id = "rchng"; ++ ++ ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); ++ if (ret < 0) ++ return ret; ++ ++ res->rst = devm_reset_control_array_get_exclusive(dev); ++ if (IS_ERR(res->rst)) ++ return PTR_ERR(res->rst); ++ ++ return 0; ++} ++ ++static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; ++ ++ clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); ++} ++ ++static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie) ++{ ++ struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; ++ struct device *dev = pcie->pci->dev; ++ int ret; ++ ++ ret = reset_control_assert(res->rst); ++ if (ret) { ++ dev_err(dev, "reset assert failed (%d)\n", ret); ++ return ret; ++ } ++ ++ /* ++ * Delay periods before and after reset deassert are working values ++ * from downstream Codeaurora kernel ++ */ ++ usleep_range(2000, 2500); ++ ++ ret = reset_control_deassert(res->rst); ++ if (ret) { ++ dev_err(dev, "reset deassert failed (%d)\n", ret); ++ return ret; ++ } ++ ++ usleep_range(2000, 2500); ++ ++ return clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); ++} ++ ++static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie) ++{ ++ struct dw_pcie *pci = pcie->pci; ++ u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); ++ u32 val; ++ int i; ++ ++ writel(SLV_ADDR_SPACE_SZ, ++ pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE); ++ ++ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); ++ val &= ~BIT(0); ++ writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); ++ ++ writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); ++ ++ writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE); ++ writel(BYPASS | MSTR_AXI_CLK_EN | AHB_CLK_EN, ++ pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); ++ writel(GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS | ++ GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL, ++ pci->dbi_base + GEN3_RELATED_OFF); ++ ++ writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS | ++ SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS | ++ AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS, ++ pcie->parf + PCIE20_PARF_SYS_CTRL); ++ ++ writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH); ++ ++ dw_pcie_dbi_ro_wr_en(pci); ++ writel(PCIE_CAP_SLOT_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP); ++ ++ val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); ++ val &= ~PCI_EXP_LNKCAP_ASPMS; ++ writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP); ++ ++ writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset + ++ PCI_EXP_DEVCTL2); ++ ++ for (i = 0; i < 256; i++) ++ writel(0, pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N + (4 * i)); ++ ++ return 0; ++} ++ + static int qcom_pcie_link_up(struct dw_pcie *pci) + { + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); +@@ -1473,6 +1589,15 @@ static const struct qcom_pcie_ops ops_1_ + .config_sid = qcom_pcie_config_sid_sm8250, + }; + ++/* Qcom IP rev.: 2.9.0 Synopsys IP rev.: 5.00a */ ++static const struct qcom_pcie_ops ops_2_9_0 = { ++ .get_resources = qcom_pcie_get_resources_2_9_0, ++ .init = qcom_pcie_init_2_9_0, ++ .post_init = qcom_pcie_post_init_2_9_0, ++ .deinit = qcom_pcie_deinit_2_9_0, ++ .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, ++}; ++ + static const struct qcom_pcie_cfg apq8084_cfg = { + .ops = &ops_1_0_0, + }; +@@ -1505,6 +1630,10 @@ static const struct qcom_pcie_cfg sc7280 + .ops = &ops_1_9_0, + }; + ++static const struct qcom_pcie_cfg ipq6018_cfg = { ++ .ops = &ops_2_9_0, ++}; ++ + static const struct dw_pcie_ops dw_pcie_ops = { + .link_up = qcom_pcie_link_up, + .start_link = qcom_pcie_start_link, +@@ -1611,6 +1740,7 @@ static const struct of_device_id qcom_pc + { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, + { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, + { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, ++ { .compatible = "qcom,pcie-ipq6018", .data = &ipq6018_cfg }, + { } + }; + diff --git a/target/linux/ipq807x/patches-5.15/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch b/target/linux/ipq807x/patches-5.15/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch new file mode 100644 index 0000000000..5300c36dce --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0078-v5.19-clk-qcom-rcg2-Cache-CFG-register-updates-for-parked-.patch @@ -0,0 +1,288 @@ +From e8e7ce92a49dc87f0d006cfbfe419b8e0b25476d Mon Sep 17 00:00:00 2001 +From: Bjorn Andersson +Date: Tue, 26 Apr 2022 14:21:36 -0700 +Subject: [PATCH] clk: qcom: rcg2: Cache CFG register updates for parked RCGs + +As GDSCs are turned on and off some associated clocks are momentarily +enabled for house keeping purposes. For this, and similar, purposes the +"shared RCGs" will park the RCG on a source clock which is known to be +available. +When the RCG is parked, a safe clock source will be selected and +committed, then the original source would be written back and upon enable +the change back to the unparked source would be committed. + +But starting with SM8350 this fails, as the value in CFG is committed by +the GDSC handshake and without a ticking parent the GDSC enablement will +time out. + +This becomes a concrete problem if the runtime supended state of a +device includes disabling such rcg's parent clock. As the device +attempts to power up the domain again the rcg will fail to enable and +hence the GDSC enablement will fail, preventing the device from +returning from the suspended state. + +This can be seen in e.g. the display stack during probe on SM8350. + +To avoid this problem, the software needs to ensure that the RCG is +configured to a active parent clock while it is disabled. This is done +by caching the CFG register content while the shared RCG is parked on +this safe source. + +Writes to M, N and D registers are committed as they are requested. New +helpers for get_parent() and recalc_rate() are extracted from their +previous implementations and __clk_rcg2_configure() is modified to allow +it to operate on the cached value. + +Fixes: 7ef6f11887bd ("clk: qcom: Configure the RCGs to a safe source as needed") +Signed-off-by: Bjorn Andersson +Reviewed-by: Stephen Boyd +Link: https://lore.kernel.org/r/20220426212136.1543984-1-bjorn.andersson@linaro.org +--- + drivers/clk/qcom/clk-rcg.h | 2 + + drivers/clk/qcom/clk-rcg2.c | 126 ++++++++++++++++++++++++++++-------- + 2 files changed, 101 insertions(+), 27 deletions(-) + +--- a/drivers/clk/qcom/clk-rcg.h ++++ b/drivers/clk/qcom/clk-rcg.h +@@ -139,6 +139,7 @@ extern const struct clk_ops clk_dyn_rcg_ + * @freq_tbl: frequency table + * @clkr: regmap clock handle + * @cfg_off: defines the cfg register offset from the CMD_RCGR + CFG_REG ++ * @parked_cfg: cached value of the CFG register for parked RCGs + */ + struct clk_rcg2 { + u32 cmd_rcgr; +@@ -149,6 +150,7 @@ struct clk_rcg2 { + const struct freq_tbl *freq_tbl; + struct clk_regmap clkr; + u8 cfg_off; ++ u32 parked_cfg; + }; + + #define to_clk_rcg2(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg2, clkr) +--- a/drivers/clk/qcom/clk-rcg2.c ++++ b/drivers/clk/qcom/clk-rcg2.c +@@ -74,16 +74,11 @@ static int clk_rcg2_is_enabled(struct cl + return (cmd & CMD_ROOT_OFF) == 0; + } + +-static u8 clk_rcg2_get_parent(struct clk_hw *hw) ++static u8 __clk_rcg2_get_parent(struct clk_hw *hw, u32 cfg) + { + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + int num_parents = clk_hw_get_num_parents(hw); +- u32 cfg; +- int i, ret; +- +- ret = regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); +- if (ret) +- goto err; ++ int i; + + cfg &= CFG_SRC_SEL_MASK; + cfg >>= CFG_SRC_SEL_SHIFT; +@@ -92,12 +87,27 @@ static u8 clk_rcg2_get_parent(struct clk + if (cfg == rcg->parent_map[i].cfg) + return i; + +-err: + pr_debug("%s: Clock %s has invalid parent, using default.\n", + __func__, clk_hw_get_name(hw)); + return 0; + } + ++static u8 clk_rcg2_get_parent(struct clk_hw *hw) ++{ ++ struct clk_rcg2 *rcg = to_clk_rcg2(hw); ++ u32 cfg; ++ int ret; ++ ++ ret = regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); ++ if (ret) { ++ pr_debug("%s: Unable to read CFG register for %s\n", ++ __func__, clk_hw_get_name(hw)); ++ return 0; ++ } ++ ++ return __clk_rcg2_get_parent(hw, cfg); ++} ++ + static int update_config(struct clk_rcg2 *rcg) + { + int count, ret; +@@ -164,12 +174,10 @@ calc_rate(unsigned long rate, u32 m, u32 + } + + static unsigned long +-clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) ++__clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate, u32 cfg) + { + struct clk_rcg2 *rcg = to_clk_rcg2(hw); +- u32 cfg, hid_div, m = 0, n = 0, mode = 0, mask; +- +- regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); ++ u32 hid_div, m = 0, n = 0, mode = 0, mask; + + if (rcg->mnd_width) { + mask = BIT(rcg->mnd_width) - 1; +@@ -190,6 +198,17 @@ clk_rcg2_recalc_rate(struct clk_hw *hw, + return calc_rate(parent_rate, m, n, mode, hid_div); + } + ++static unsigned long ++clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) ++{ ++ struct clk_rcg2 *rcg = to_clk_rcg2(hw); ++ u32 cfg; ++ ++ regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); ++ ++ return __clk_rcg2_recalc_rate(hw, parent_rate, cfg); ++} ++ + static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f, + struct clk_rate_request *req, + enum freq_policy policy) +@@ -263,7 +282,8 @@ static int clk_rcg2_determine_floor_rate + return _freq_tbl_determine_rate(hw, rcg->freq_tbl, req, FLOOR); + } + +-static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f) ++static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f, ++ u32 *_cfg) + { + u32 cfg, mask, d_val, not2d_val, n_minus_m; + struct clk_hw *hw = &rcg->clkr.hw; +@@ -305,15 +325,27 @@ static int __clk_rcg2_configure(struct c + cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT; + if (rcg->mnd_width && f->n && (f->m != f->n)) + cfg |= CFG_MODE_DUAL_EDGE; +- return regmap_update_bits(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), +- mask, cfg); ++ ++ *_cfg &= ~mask; ++ *_cfg |= cfg; ++ ++ return 0; + } + + static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f) + { ++ u32 cfg; + int ret; + +- ret = __clk_rcg2_configure(rcg, f); ++ ret = regmap_read(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), &cfg); ++ if (ret) ++ return ret; ++ ++ ret = __clk_rcg2_configure(rcg, f, &cfg); ++ if (ret) ++ return ret; ++ ++ ret = regmap_write(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg), cfg); + if (ret) + return ret; + +@@ -994,11 +1026,12 @@ static int clk_rcg2_shared_set_rate(stru + return -EINVAL; + + /* +- * In case clock is disabled, update the CFG, M, N and D registers +- * and don't hit the update bit of CMD register. ++ * In case clock is disabled, update the M, N and D registers, cache ++ * the CFG value in parked_cfg and don't hit the update bit of CMD ++ * register. + */ +- if (!__clk_is_enabled(hw->clk)) +- return __clk_rcg2_configure(rcg, f); ++ if (!clk_hw_is_enabled(hw)) ++ return __clk_rcg2_configure(rcg, f, &rcg->parked_cfg); + + return clk_rcg2_shared_force_enable_clear(hw, f); + } +@@ -1022,6 +1055,11 @@ static int clk_rcg2_shared_enable(struct + if (ret) + return ret; + ++ /* Write back the stored configuration corresponding to current rate */ ++ ret = regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, rcg->parked_cfg); ++ if (ret) ++ return ret; ++ + ret = update_config(rcg); + if (ret) + return ret; +@@ -1032,13 +1070,12 @@ static int clk_rcg2_shared_enable(struct + static void clk_rcg2_shared_disable(struct clk_hw *hw) + { + struct clk_rcg2 *rcg = to_clk_rcg2(hw); +- u32 cfg; + + /* + * Store current configuration as switching to safe source would clear + * the SRC and DIV of CFG register + */ +- regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg); ++ regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &rcg->parked_cfg); + + /* + * Park the RCG at a safe configuration - sourced off of safe source. +@@ -1056,17 +1093,52 @@ static void clk_rcg2_shared_disable(stru + update_config(rcg); + + clk_rcg2_clear_force_enable(hw); ++} + +- /* Write back the stored configuration corresponding to current rate */ +- regmap_write(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, cfg); ++static u8 clk_rcg2_shared_get_parent(struct clk_hw *hw) ++{ ++ struct clk_rcg2 *rcg = to_clk_rcg2(hw); ++ ++ /* If the shared rcg is parked use the cached cfg instead */ ++ if (!clk_hw_is_enabled(hw)) ++ return __clk_rcg2_get_parent(hw, rcg->parked_cfg); ++ ++ return clk_rcg2_get_parent(hw); ++} ++ ++static int clk_rcg2_shared_set_parent(struct clk_hw *hw, u8 index) ++{ ++ struct clk_rcg2 *rcg = to_clk_rcg2(hw); ++ ++ /* If the shared rcg is parked only update the cached cfg */ ++ if (!clk_hw_is_enabled(hw)) { ++ rcg->parked_cfg &= ~CFG_SRC_SEL_MASK; ++ rcg->parked_cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT; ++ ++ return 0; ++ } ++ ++ return clk_rcg2_set_parent(hw, index); ++} ++ ++static unsigned long ++clk_rcg2_shared_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) ++{ ++ struct clk_rcg2 *rcg = to_clk_rcg2(hw); ++ ++ /* If the shared rcg is parked use the cached cfg instead */ ++ if (!clk_hw_is_enabled(hw)) ++ return __clk_rcg2_recalc_rate(hw, parent_rate, rcg->parked_cfg); ++ ++ return clk_rcg2_recalc_rate(hw, parent_rate); + } + + const struct clk_ops clk_rcg2_shared_ops = { + .enable = clk_rcg2_shared_enable, + .disable = clk_rcg2_shared_disable, +- .get_parent = clk_rcg2_get_parent, +- .set_parent = clk_rcg2_set_parent, +- .recalc_rate = clk_rcg2_recalc_rate, ++ .get_parent = clk_rcg2_shared_get_parent, ++ .set_parent = clk_rcg2_shared_set_parent, ++ .recalc_rate = clk_rcg2_shared_recalc_rate, + .determine_rate = clk_rcg2_determine_rate, + .set_rate = clk_rcg2_shared_set_rate, + .set_rate_and_parent = clk_rcg2_shared_set_rate_and_parent, diff --git a/target/linux/ipq807x/patches-5.15/0079-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch b/target/linux/ipq807x/patches-5.15/0079-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch new file mode 100644 index 0000000000..3319f431ba --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0079-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch @@ -0,0 +1,207 @@ +From 77faa07c185c969e742cbb3e6aa487a11b0b616c Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski +Date: Tue, 30 Aug 2022 09:57:42 +0300 +Subject: [PATCH] dt-bindings: arm: qcom: document qcom,msm-id and + qcom,board-id + +The top level qcom,msm-id and qcom,board-id properties are utilized by +bootloaders on Qualcomm MSM platforms to determine which device tree +should be used and passed to the kernel. + +The commit b32e592d3c28 ("devicetree: bindings: Document qcom board +compatible format") from 2015 was a consensus during discussion about +upstreaming qcom,msm-id and qcom,board-id fields. There are however still +problems with that consensus: +1. It was reached 7 years ago but it turned out its implementation did + not reach all possible products. + +2. Initially additional tool (dtbTool) was needed for parsing these + fields to create a QCDT image consisting of multiple DTBs, later the + bootloaders were improved and they use these qcom,msm-id and + qcom,board-id properties directly. + +3. Extracting relevant information from the board compatible requires + this additional tool (dtbTool), which makes the build process more + complicated and not easily reproducible (DTBs are modified after the + kernel build). + +4. Some versions of Qualcomm bootloaders expect these properties even + when booting with a single DTB. The community is stuck with these + bootloaders thus they require properties in the DTBs. + +Since several upstreamed Qualcomm SoC-based boards require these +properties to properly boot and the properties are reportedly used by +bootloaders, document them along with the bindings header with constants +used by: bootloader, some DTS and socinfo driver. + +Link: https://lore.kernel.org/r/a3c932d1-a102-ce18-deea-18cbbd05ecab@linaro.org/ +Co-developed-by: Kumar Gala +Signed-off-by: Kumar Gala +Signed-off-by: Krzysztof Kozlowski +Reviewed-by: Dmitry Baryshkov +Reviewed-by: Rob Herring +Signed-off-by: Bjorn Andersson +Link: https://lore.kernel.org/r/20220830065744.161163-2-krzysztof.kozlowski@linaro.org +--- + include/dt-bindings/arm/qcom,ids.h | 155 +++++++++++++++++++++++++++++ + 1 file changed, 155 insertions(+) + create mode 100644 include/dt-bindings/arm/qcom,ids.h + +--- /dev/null ++++ b/include/dt-bindings/arm/qcom,ids.h +@@ -0,0 +1,155 @@ ++/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * Copyright (c) 2022 Linaro Ltd ++ * Author: Krzysztof Kozlowski based on previous work of Kumar Gala. ++ */ ++#ifndef _DT_BINDINGS_ARM_QCOM_IDS_H ++#define _DT_BINDINGS_ARM_QCOM_IDS_H ++ ++/* ++ * The MSM chipset and hardware revision used by Qualcomm bootloaders, DTS for ++ * older chipsets (qcom,msm-id) and in socinfo driver: ++ */ ++#define QCOM_ID_MSM8960 87 ++#define QCOM_ID_APQ8064 109 ++#define QCOM_ID_MSM8660A 122 ++#define QCOM_ID_MSM8260A 123 ++#define QCOM_ID_APQ8060A 124 ++#define QCOM_ID_MSM8974 126 ++#define QCOM_ID_MPQ8064 130 ++#define QCOM_ID_MSM8960AB 138 ++#define QCOM_ID_APQ8060AB 139 ++#define QCOM_ID_MSM8260AB 140 ++#define QCOM_ID_MSM8660AB 141 ++#define QCOM_ID_MSM8626 145 ++#define QCOM_ID_MSM8610 147 ++#define QCOM_ID_APQ8064AB 153 ++#define QCOM_ID_MSM8226 158 ++#define QCOM_ID_MSM8526 159 ++#define QCOM_ID_MSM8110 161 ++#define QCOM_ID_MSM8210 162 ++#define QCOM_ID_MSM8810 163 ++#define QCOM_ID_MSM8212 164 ++#define QCOM_ID_MSM8612 165 ++#define QCOM_ID_MSM8112 166 ++#define QCOM_ID_MSM8225Q 168 ++#define QCOM_ID_MSM8625Q 169 ++#define QCOM_ID_MSM8125Q 170 ++#define QCOM_ID_APQ8064AA 172 ++#define QCOM_ID_APQ8084 178 ++#define QCOM_ID_APQ8074 184 ++#define QCOM_ID_MSM8274 185 ++#define QCOM_ID_MSM8674 186 ++#define QCOM_ID_MSM8974PRO_AC 194 ++#define QCOM_ID_MSM8126 198 ++#define QCOM_ID_APQ8026 199 ++#define QCOM_ID_MSM8926 200 ++#define QCOM_ID_MSM8326 205 ++#define QCOM_ID_MSM8916 206 ++#define QCOM_ID_MSM8994 207 ++#define QCOM_ID_APQ8074PRO_AA 208 ++#define QCOM_ID_APQ8074PRO_AB 209 ++#define QCOM_ID_APQ8074PRO_AC 210 ++#define QCOM_ID_MSM8274PRO_AA 211 ++#define QCOM_ID_MSM8274PRO_AB 212 ++#define QCOM_ID_MSM8274PRO_AC 213 ++#define QCOM_ID_MSM8674PRO_AA 214 ++#define QCOM_ID_MSM8674PRO_AB 215 ++#define QCOM_ID_MSM8674PRO_AC 216 ++#define QCOM_ID_MSM8974PRO_AA 217 ++#define QCOM_ID_MSM8974PRO_AB 218 ++#define QCOM_ID_APQ8028 219 ++#define QCOM_ID_MSM8128 220 ++#define QCOM_ID_MSM8228 221 ++#define QCOM_ID_MSM8528 222 ++#define QCOM_ID_MSM8628 223 ++#define QCOM_ID_MSM8928 224 ++#define QCOM_ID_MSM8510 225 ++#define QCOM_ID_MSM8512 226 ++#define QCOM_ID_MSM8936 233 ++#define QCOM_ID_MSM8939 239 ++#define QCOM_ID_APQ8036 240 ++#define QCOM_ID_APQ8039 241 ++#define QCOM_ID_MSM8996 246 ++#define QCOM_ID_APQ8016 247 ++#define QCOM_ID_MSM8216 248 ++#define QCOM_ID_MSM8116 249 ++#define QCOM_ID_MSM8616 250 ++#define QCOM_ID_MSM8992 251 ++#define QCOM_ID_APQ8094 253 ++#define QCOM_ID_MDM9607 290 ++#define QCOM_ID_APQ8096 291 ++#define QCOM_ID_MSM8998 292 ++#define QCOM_ID_MSM8953 293 ++#define QCOM_ID_MDM8207 296 ++#define QCOM_ID_MDM9207 297 ++#define QCOM_ID_MDM9307 298 ++#define QCOM_ID_MDM9628 299 ++#define QCOM_ID_APQ8053 304 ++#define QCOM_ID_MSM8996SG 305 ++#define QCOM_ID_MSM8996AU 310 ++#define QCOM_ID_APQ8096AU 311 ++#define QCOM_ID_APQ8096SG 312 ++#define QCOM_ID_SDM660 317 ++#define QCOM_ID_SDM630 318 ++#define QCOM_ID_APQ8098 319 ++#define QCOM_ID_SDM845 321 ++#define QCOM_ID_MDM9206 322 ++#define QCOM_ID_IPQ8074 323 ++#define QCOM_ID_SDA660 324 ++#define QCOM_ID_SDM658 325 ++#define QCOM_ID_SDA658 326 ++#define QCOM_ID_SDA630 327 ++#define QCOM_ID_SDM450 338 ++#define QCOM_ID_SDA845 341 ++#define QCOM_ID_IPQ8072 342 ++#define QCOM_ID_IPQ8076 343 ++#define QCOM_ID_IPQ8078 344 ++#define QCOM_ID_SDM636 345 ++#define QCOM_ID_SDA636 346 ++#define QCOM_ID_SDM632 349 ++#define QCOM_ID_SDA632 350 ++#define QCOM_ID_SDA450 351 ++#define QCOM_ID_SM8250 356 ++#define QCOM_ID_IPQ8070 375 ++#define QCOM_ID_IPQ8071 376 ++#define QCOM_ID_IPQ8072A 389 ++#define QCOM_ID_IPQ8074A 390 ++#define QCOM_ID_IPQ8076A 391 ++#define QCOM_ID_IPQ8078A 392 ++#define QCOM_ID_SM6125 394 ++#define QCOM_ID_IPQ8070A 395 ++#define QCOM_ID_IPQ8071A 396 ++#define QCOM_ID_IPQ6018 402 ++#define QCOM_ID_IPQ6028 403 ++#define QCOM_ID_IPQ6000 421 ++#define QCOM_ID_IPQ6010 422 ++#define QCOM_ID_SC7180 425 ++#define QCOM_ID_SM6350 434 ++#define QCOM_ID_SM8350 439 ++#define QCOM_ID_SC8280XP 449 ++#define QCOM_ID_IPQ6005 453 ++#define QCOM_ID_QRB5165 455 ++#define QCOM_ID_SM8450 457 ++#define QCOM_ID_SM7225 459 ++#define QCOM_ID_SA8295P 460 ++#define QCOM_ID_SA8540P 461 ++#define QCOM_ID_SM8450_2 480 ++#define QCOM_ID_SM8450_3 482 ++#define QCOM_ID_SC7280 487 ++#define QCOM_ID_SC7180P 495 ++#define QCOM_ID_SM6375 507 ++ ++/* ++ * The board type and revision information, used by Qualcomm bootloaders and ++ * DTS for older chipsets (qcom,board-id): ++ */ ++#define QCOM_BOARD_ID(a, major, minor) \ ++ (((major & 0xff) << 16) | ((minor & 0xff) << 8) | QCOM_BOARD_ID_##a) ++ ++#define QCOM_BOARD_ID_MTP 8 ++#define QCOM_BOARD_ID_DRAGONBOARD 10 ++#define QCOM_BOARD_ID_SBC 24 ++ ++#endif /* _DT_BINDINGS_ARM_QCOM_IDS_H */ diff --git a/target/linux/ipq807x/patches-5.15/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch b/target/linux/ipq807x/patches-5.15/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch new file mode 100644 index 0000000000..5713775948 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch @@ -0,0 +1,203 @@ +From 032be4f49dda786fea9e1501212f6cd09a7ded96 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 3 Nov 2022 14:49:43 +0100 +Subject: [PATCH] clk: qcom: clk-rcg2: introduce support for multiple conf for + same freq + +Some RCG frequency can be reached by multiple configuration. + +We currently declare multiple configuration for the same frequency but +that is not supported and always the first configuration will be taken. + +These multiple configuration are needed as based on the current parent +configuration, it may be needed to use a different configuration to +reach the same frequency. + +To handle this introduce 2 new macro, FM and C. + +- FM is used to declare an empty freq_tbl with just the frequency and an + array of confs to insert all the config for the provided frequency. + +- C is used to declare a fre_conf where src, pre_div, m and n are + provided. + +The driver is changed to handle this special freq_tbl and select the +correct config by calculating the final rate and deciding based on the +one that is less different than the requested one. + +Tested-by: Robert Marko +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/clk-rcg.h | 14 ++++++- + drivers/clk/qcom/clk-rcg2.c | 84 +++++++++++++++++++++++++++++++++---- + 2 files changed, 88 insertions(+), 10 deletions(-) + +--- a/drivers/clk/qcom/clk-rcg.h ++++ b/drivers/clk/qcom/clk-rcg.h +@@ -7,7 +7,17 @@ + #include + #include "clk-regmap.h" + +-#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) } ++#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n), 0, NULL } ++ ++#define FM(_f, _confs) { .freq = (_f), .confs_num = ARRAY_SIZE(_confs), .confs = (_confs) } ++#define C(s, h, m, n) { (s), (2 * (h) - 1), (m), (n) } ++ ++struct freq_conf { ++ u8 src; ++ u8 pre_div; ++ u16 m; ++ u16 n; ++}; + + struct freq_tbl { + unsigned long freq; +@@ -15,6 +25,8 @@ struct freq_tbl { + u8 pre_div; + u16 m; + u16 n; ++ int confs_num; ++ const struct freq_conf *confs; + }; + + /** +--- a/drivers/clk/qcom/clk-rcg2.c ++++ b/drivers/clk/qcom/clk-rcg2.c +@@ -209,11 +209,60 @@ clk_rcg2_recalc_rate(struct clk_hw *hw, + return __clk_rcg2_recalc_rate(hw, parent_rate, cfg); + } + ++static void ++clk_rcg2_select_conf(struct clk_hw *hw, struct freq_tbl *f_tbl, ++ const struct freq_tbl *f, unsigned long req_rate) ++{ ++ unsigned long best_rate = 0, parent_rate, rate; ++ const struct freq_conf *conf, *best_conf; ++ struct clk_rcg2 *rcg = to_clk_rcg2(hw); ++ struct clk_hw *p; ++ int index, i; ++ ++ /* Search in each provided config the one that is near the wanted rate */ ++ for (i = 0, conf = f->confs; i < f->confs_num; i++, conf++) { ++ index = qcom_find_src_index(hw, rcg->parent_map, conf->src); ++ if (index < 0) ++ continue; ++ ++ p = clk_hw_get_parent_by_index(hw, index); ++ if (!p) ++ continue; ++ ++ parent_rate = clk_hw_get_rate(p); ++ rate = calc_rate(parent_rate, conf->n, conf->m, conf->n, conf->pre_div); ++ ++ if (rate == req_rate) { ++ best_conf = conf; ++ break; ++ } ++ ++ if (abs(req_rate - rate) < abs(best_rate - rate)) { ++ best_rate = rate; ++ best_conf = conf; ++ } ++ } ++ ++ /* ++ * Very unlikely. ++ * Force the first conf if we can't find a correct config. ++ */ ++ if (unlikely(i == f->confs_num)) ++ best_conf = f->confs; ++ ++ /* Apply the config */ ++ f_tbl->src = best_conf->src; ++ f_tbl->pre_div = best_conf->pre_div; ++ f_tbl->m = best_conf->m; ++ f_tbl->n = best_conf->n; ++} ++ + static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f, + struct clk_rate_request *req, + enum freq_policy policy) + { + unsigned long clk_flags, rate = req->rate; ++ struct freq_tbl f_tbl; + struct clk_hw *p; + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + int index; +@@ -232,7 +281,15 @@ static int _freq_tbl_determine_rate(stru + if (!f) + return -EINVAL; + +- index = qcom_find_src_index(hw, rcg->parent_map, f->src); ++ f_tbl = *f; ++ /* ++ * A single freq may be reached by multiple configuration. ++ * Try to find the bast one if we have this kind of freq_table. ++ */ ++ if (f->confs) ++ clk_rcg2_select_conf(hw, &f_tbl, f, rate); ++ ++ index = qcom_find_src_index(hw, rcg->parent_map, f_tbl.src); + if (index < 0) + return index; + +@@ -242,18 +299,18 @@ static int _freq_tbl_determine_rate(stru + return -EINVAL; + + if (clk_flags & CLK_SET_RATE_PARENT) { +- rate = f->freq; +- if (f->pre_div) { ++ rate = f_tbl.freq; ++ if (f_tbl.pre_div) { + if (!rate) + rate = req->rate; + rate /= 2; +- rate *= f->pre_div + 1; ++ rate *= f_tbl.pre_div + 1; + } + +- if (f->n) { ++ if (f_tbl.n) { + u64 tmp = rate; +- tmp = tmp * f->n; +- do_div(tmp, f->m); ++ tmp = tmp * f_tbl.n; ++ do_div(tmp, f_tbl.m); + rate = tmp; + } + } else { +@@ -261,7 +318,7 @@ static int _freq_tbl_determine_rate(stru + } + req->best_parent_hw = p; + req->best_parent_rate = rate; +- req->rate = f->freq; ++ req->rate = f_tbl.freq; + + return 0; + } +@@ -357,6 +414,7 @@ static int __clk_rcg2_set_rate(struct cl + { + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + const struct freq_tbl *f; ++ struct freq_tbl f_tbl; + + switch (policy) { + case FLOOR: +@@ -372,7 +430,15 @@ static int __clk_rcg2_set_rate(struct cl + if (!f) + return -EINVAL; + +- return clk_rcg2_configure(rcg, f); ++ f_tbl = *f; ++ /* ++ * A single freq may be reached by multiple configuration. ++ * Try to find the best one if we have this kind of freq_table. ++ */ ++ if (f->confs) ++ clk_rcg2_select_conf(hw, &f_tbl, f, rate); ++ ++ return clk_rcg2_configure(rcg, &f_tbl); + } + + static int clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate, diff --git a/target/linux/ipq807x/patches-5.15/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch b/target/linux/ipq807x/patches-5.15/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch new file mode 100644 index 0000000000..32fb2d9d87 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch @@ -0,0 +1,129 @@ +From f778553f296792f4d1e8b3552603ad6116ea3eb3 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 3 Nov 2022 14:49:44 +0100 +Subject: [PATCH] clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple + conf + +Rework nss_port5/6 to use the new multiple configuration implementation +and correctly fix the clocks for these port under some corner case. + +This is particularly relevant for device that have 2.5G or 10G port +connected to port5 or port 6 on ipq8074. As the parent are shared +across multiple port it may be required to select the correct +configuration to accomplish the desired clock. Without this patch such +port doesn't work in some specific ethernet speed as the clock will be +set to the wrong frequency as we just select the first configuration for +the related frequency instead of selecting the best one. + +Tested-by: Robert Marko # ipq8074 Qnap QHora-301W +Signed-off-by: Christian Marangi +--- + drivers/clk/qcom/gcc-ipq8074.c | 64 +++++++++++++++++++++++++--------- + 1 file changed, 48 insertions(+), 16 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -1682,13 +1682,21 @@ static struct clk_regmap_div nss_port4_t + }, + }; + ++static const struct freq_conf ftbl_nss_port5_rx_clk_src_25[] = { ++ C(P_UNIPHY1_RX, 12.5, 0, 0), ++ C(P_UNIPHY0_RX, 5, 0, 0), ++}; ++ ++static const struct freq_conf ftbl_nss_port5_rx_clk_src_125[] = { ++ C(P_UNIPHY1_RX, 2.5, 0, 0), ++ C(P_UNIPHY0_RX, 1, 0, 0), ++}; ++ + static const struct freq_tbl ftbl_nss_port5_rx_clk_src[] = { + F(19200000, P_XO, 1, 0, 0), +- F(25000000, P_UNIPHY1_RX, 12.5, 0, 0), +- F(25000000, P_UNIPHY0_RX, 5, 0, 0), ++ FM(25000000, ftbl_nss_port5_rx_clk_src_25), + F(78125000, P_UNIPHY1_RX, 4, 0, 0), +- F(125000000, P_UNIPHY1_RX, 2.5, 0, 0), +- F(125000000, P_UNIPHY0_RX, 1, 0, 0), ++ FM(125000000, ftbl_nss_port5_rx_clk_src_125), + F(156250000, P_UNIPHY1_RX, 2, 0, 0), + F(312500000, P_UNIPHY1_RX, 1, 0, 0), + { } +@@ -1744,13 +1752,21 @@ static struct clk_regmap_div nss_port5_r + }, + }; + ++static struct freq_conf ftbl_nss_port5_tx_clk_src_25[] = { ++ C(P_UNIPHY1_TX, 12.5, 0, 0), ++ C(P_UNIPHY0_TX, 5, 0, 0), ++}; ++ ++static struct freq_conf ftbl_nss_port5_tx_clk_src_125[] = { ++ C(P_UNIPHY1_TX, 2.5, 0, 0), ++ C(P_UNIPHY0_TX, 1, 0, 0), ++}; ++ + static const struct freq_tbl ftbl_nss_port5_tx_clk_src[] = { + F(19200000, P_XO, 1, 0, 0), +- F(25000000, P_UNIPHY1_TX, 12.5, 0, 0), +- F(25000000, P_UNIPHY0_TX, 5, 0, 0), ++ FM(25000000, ftbl_nss_port5_tx_clk_src_25), + F(78125000, P_UNIPHY1_TX, 4, 0, 0), +- F(125000000, P_UNIPHY1_TX, 2.5, 0, 0), +- F(125000000, P_UNIPHY0_TX, 1, 0, 0), ++ FM(125000000, ftbl_nss_port5_tx_clk_src_125), + F(156250000, P_UNIPHY1_TX, 2, 0, 0), + F(312500000, P_UNIPHY1_TX, 1, 0, 0), + { } +@@ -1806,13 +1822,21 @@ static struct clk_regmap_div nss_port5_t + }, + }; + ++static struct freq_conf ftbl_nss_port6_rx_clk_src_25[] = { ++ C(P_UNIPHY2_RX, 5, 0, 0), ++ C(P_UNIPHY2_RX, 12.5, 0, 0), ++}; ++ ++static struct freq_conf ftbl_nss_port6_rx_clk_src_125[] = { ++ C(P_UNIPHY2_RX, 1, 0, 0), ++ C(P_UNIPHY2_RX, 2.5, 0, 0), ++}; ++ + static const struct freq_tbl ftbl_nss_port6_rx_clk_src[] = { + F(19200000, P_XO, 1, 0, 0), +- F(25000000, P_UNIPHY2_RX, 5, 0, 0), +- F(25000000, P_UNIPHY2_RX, 12.5, 0, 0), ++ FM(25000000, ftbl_nss_port6_rx_clk_src_25), + F(78125000, P_UNIPHY2_RX, 4, 0, 0), +- F(125000000, P_UNIPHY2_RX, 1, 0, 0), +- F(125000000, P_UNIPHY2_RX, 2.5, 0, 0), ++ FM(125000000, ftbl_nss_port6_rx_clk_src_125), + F(156250000, P_UNIPHY2_RX, 2, 0, 0), + F(312500000, P_UNIPHY2_RX, 1, 0, 0), + { } +@@ -1863,13 +1887,21 @@ static struct clk_regmap_div nss_port6_r + }, + }; + ++static struct freq_conf ftbl_nss_port6_tx_clk_src_25[] = { ++ C(P_UNIPHY2_TX, 5, 0, 0), ++ C(P_UNIPHY2_TX, 12.5, 0, 0), ++}; ++ ++static struct freq_conf ftbl_nss_port6_tx_clk_src_125[] = { ++ C(P_UNIPHY2_TX, 1, 0, 0), ++ C(P_UNIPHY2_TX, 2.5, 0, 0), ++}; ++ + static const struct freq_tbl ftbl_nss_port6_tx_clk_src[] = { + F(19200000, P_XO, 1, 0, 0), +- F(25000000, P_UNIPHY2_TX, 5, 0, 0), +- F(25000000, P_UNIPHY2_TX, 12.5, 0, 0), ++ FM(25000000, ftbl_nss_port6_tx_clk_src_25), + F(78125000, P_UNIPHY2_TX, 4, 0, 0), +- F(125000000, P_UNIPHY2_TX, 1, 0, 0), +- F(125000000, P_UNIPHY2_TX, 2.5, 0, 0), ++ FM(125000000, ftbl_nss_port6_tx_clk_src_125), + F(156250000, P_UNIPHY2_TX, 2, 0, 0), + F(312500000, P_UNIPHY2_TX, 1, 0, 0), + { } diff --git a/target/linux/ipq807x/patches-5.15/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch b/target/linux/ipq807x/patches-5.15/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch new file mode 100644 index 0000000000..af53c077ff --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch @@ -0,0 +1,70 @@ +From ad2d07f71739351eeea1d8a120c0918e2c4b265f Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 22 Dec 2021 12:23:34 +0100 +Subject: [PATCH] arm64: dts: ipq8074: add reserved memory nodes + +IPQ8074 has multiple reserved memory ranges, if they are not defined +then weird things tend to happen, board hangs and resets when PCI or +WLAN is used etc. + +So, to avoid all of that add the reserved memory nodes from the downstream +5.4 kernel from QCA. +This is their default layout meant for devices with 1GB of RAM, but +devices with lower ammounts can override the Q6 node. + +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 35 +++++++++++++++++++++++++++ + 1 file changed, 35 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -85,6 +85,26 @@ + #size-cells = <2>; + ranges; + ++ nss@40000000 { ++ no-map; ++ reg = <0x0 0x40000000 0x0 0x01000000>; ++ }; ++ ++ tzapp_region: tzapp@4a400000 { ++ no-map; ++ reg = <0x0 0x4a400000 0x0 0x00200000>; ++ }; ++ ++ uboot@4a600000 { ++ no-map; ++ reg = <0x0 0x4a600000 0x0 0x00400000>; ++ }; ++ ++ sbl@4aa00000 { ++ no-map; ++ reg = <0x0 0x4aa00000 0x0 0x00100000>; ++ }; ++ + smem@4ab00000 { + compatible = "qcom,smem"; + reg = <0x0 0x4ab00000 0x0 0x00100000>; +@@ -97,6 +117,21 @@ + no-map; + reg = <0x0 0x4ac00000 0x0 0x00400000>; + }; ++ ++ q6_region: wcnss@4b000000 { ++ no-map; ++ reg = <0x0 0x4b000000 0x0 0x05f00000>; ++ }; ++ ++ q6_etr_region: q6_etr_dump@50f00000 { ++ no-map; ++ reg = <0x0 0x50f00000 0x0 0x00100000>; ++ }; ++ ++ m3_dump_region: m3_dump@51000000 { ++ no-map; ++ reg = <0x0 0x51000000 0x0 0x100000>; ++ }; + }; + + firmware { diff --git a/target/linux/ipq807x/patches-5.15/0103-arm64-dts-qcom-ipq8074-fix-Gen2-PCIe-QMP-PHY.patch b/target/linux/ipq807x/patches-5.15/0103-arm64-dts-qcom-ipq8074-fix-Gen2-PCIe-QMP-PHY.patch new file mode 100644 index 0000000000..6eb282c7aa --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0103-arm64-dts-qcom-ipq8074-fix-Gen2-PCIe-QMP-PHY.patch @@ -0,0 +1,28 @@ +From 075b3ca8a4223742abc6da2406afe206d97f3d52 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 16 Nov 2022 22:48:33 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: fix Gen2 PCIe QMP PHY + +Serdes register space sizes are incorrect, update them to match the +actual sizes from downstream QCA 5.4 kernel. + +Fixes: 942bcd33ed45 ("arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes") +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -277,9 +277,9 @@ + status = "disabled"; + + pcie_phy1: phy@8e200 { +- reg = <0x8e200 0x16c>, ++ reg = <0x8e200 0x130>, + <0x8e400 0x200>, +- <0x8e800 0x4f4>; ++ <0x8e800 0x1f8>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; diff --git a/target/linux/ipq807x/patches-5.15/0104-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-QMP-PHY.patch b/target/linux/ipq807x/patches-5.15/0104-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-QMP-PHY.patch new file mode 100644 index 0000000000..a44757a2e3 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0104-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-QMP-PHY.patch @@ -0,0 +1,55 @@ +From 6f49bc0ee169c90b5c26a1e3d27a4728142f0ddb Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 16 Nov 2022 22:48:34 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY + +IPQ8074 comes in 2 silicon versions: +* v1 with 2x Gen2 PCIe ports and QMP PHY-s +* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s + +v2 is the final and production version that is actually supported by the +kernel, however it looks like PCIe related nodes were added for the v1 SoC. + +Now that we have Gen3 QMP PHY support, we can start fixing the PCIe support +by fixing the Gen3 QMP PHY node first. + +Change the compatible to the Gen3 QMP PHY, correct the register space start +and size, add the missing misc PCS register space. + +Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes") +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 15 ++++++++------- + 1 file changed, 8 insertions(+), 7 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -232,9 +232,9 @@ + status = "disabled"; + }; + +- pcie_qmp0: phy@86000 { +- compatible = "qcom,ipq8074-qmp-pcie-phy"; +- reg = <0x00086000 0x1c4>; ++ pcie_qmp0: phy@84000 { ++ compatible = "qcom,ipq8074-qmp-gen3-pcie-phy"; ++ reg = <0x00084000 0x1bc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; +@@ -248,10 +248,11 @@ + "common"; + status = "disabled"; + +- pcie_phy0: phy@86200 { +- reg = <0x86200 0x16c>, +- <0x86400 0x200>, +- <0x86800 0x4f4>; ++ pcie_phy0: phy@84200 { ++ reg = <0x84200 0x16c>, ++ <0x84400 0x200>, ++ <0x84800 0x1f0>, ++ <0x84c00 0xf4>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; diff --git a/target/linux/ipq807x/patches-5.15/0105-arm64-dts-qcom-ipq8074-correct-Gen2-PCIe-ranges.patch b/target/linux/ipq807x/patches-5.15/0105-arm64-dts-qcom-ipq8074-correct-Gen2-PCIe-ranges.patch new file mode 100644 index 0000000000..049109015d --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0105-arm64-dts-qcom-ipq8074-correct-Gen2-PCIe-ranges.patch @@ -0,0 +1,29 @@ +From 52a48e8ed546339122983329410be801a2b9adf5 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 16 Nov 2022 22:48:35 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges + +Current ranges property set in Gen2 PCIe node is incorrect, replace it +with the downstream 5.4 QCA kernel value. + +Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes") +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -808,9 +808,9 @@ + phy-names = "pciephy"; + + ranges = <0x81000000 0 0x10200000 0x10200000 +- 0 0x100000 /* downstream I/O */ +- 0x82000000 0 0x10300000 0x10300000 +- 0 0xd00000>; /* non-prefetchable memory */ ++ 0 0x10000>, /* downstream I/O */ ++ <0x82000000 0 0x10220000 0x10220000 ++ 0 0xfde0000>; /* non-prefetchable memory */ + + interrupts = ; + interrupt-names = "msi"; diff --git a/target/linux/ipq807x/patches-5.15/0106-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch b/target/linux/ipq807x/patches-5.15/0106-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch new file mode 100644 index 0000000000..0fa38394b9 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0106-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch @@ -0,0 +1,24 @@ +From a4748d2850783d36f77ccf2b5fcc86ccf1800ef1 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 16 Nov 2022 22:48:36 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed + +Add the generic 'max-link-speed' property to describe the Gen2 PCIe link +generation limit. +This allows the generic DWC code to configure the link speed correctly. + +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -801,6 +801,7 @@ + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; ++ max-link-speed = <2>; + #address-cells = <3>; + #size-cells = <2>; + diff --git a/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch b/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch new file mode 100644 index 0000000000..ae6b148210 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch @@ -0,0 +1,23 @@ +From 76893579a74e7e5c79f0c717d95d13f4cbbb5f4d Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sat, 24 Dec 2022 17:11:16 +0100 +Subject: [PATCH] PCI: qcom: Add support for IPQ8074 Gen3 port + +IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported. +Add compatible for Gen3 port which uses the same controller as IPQ6018. + +Signed-off-by: Robert Marko +--- + drivers/pci/controller/dwc/pcie-qcom.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/pci/controller/dwc/pcie-qcom.c ++++ b/drivers/pci/controller/dwc/pcie-qcom.c +@@ -1735,6 +1735,7 @@ static const struct of_device_id qcom_pc + { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, + { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, ++ { .compatible = "qcom,pcie-ipq8074-gen3", .data = &ipq6018_cfg }, + { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, diff --git a/target/linux/ipq807x/patches-5.15/0108-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-node.patch b/target/linux/ipq807x/patches-5.15/0108-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-node.patch new file mode 100644 index 0000000000..fc4db15ea2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0108-arm64-dts-qcom-ipq8074-fix-Gen3-PCIe-node.patch @@ -0,0 +1,97 @@ +From 625c90a8266e432ea15e109123ca941062b63f76 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 16 Nov 2022 22:48:40 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: fix Gen3 PCIe node + +IPQ8074 comes in 2 silicon versions: +* v1 with 2x Gen2 PCIe ports and QMP PHY-s +* v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s + +v2 is the final and production version that is actually supported by the +kernel, however it looks like PCIe related nodes were added for the v1 SoC. + +Finish the PCIe fixup by using the correct compatible, adding missing ATU +register space, declaring max-link-speed, use correct ranges, add missing +clocks and resets. + +Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes") +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 30 +++++++++++++++------------ + 1 file changed, 17 insertions(+), 13 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -854,16 +854,18 @@ + }; + + pcie0: pci@20000000 { +- compatible = "qcom,pcie-ipq8074"; ++ compatible = "qcom,pcie-ipq8074-gen3"; + reg = <0x20000000 0xf1d>, + <0x20000f20 0xa8>, +- <0x00080000 0x2000>, ++ <0x20001000 0x1000>, ++ <0x00080000 0x4000>, + <0x20100000 0x1000>; +- reg-names = "dbi", "elbi", "parf", "config"; ++ reg-names = "dbi", "elbi", "atu", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; ++ max-link-speed = <3>; + #address-cells = <3>; + #size-cells = <2>; + +@@ -871,9 +873,9 @@ + phy-names = "pciephy"; + + ranges = <0x81000000 0 0x20200000 0x20200000 +- 0 0x100000 /* downstream I/O */ +- 0x82000000 0 0x20300000 0x20300000 +- 0 0xd00000>; /* non-prefetchable memory */ ++ 0 0x10000>, /* downstream I/O */ ++ <0x82000000 0 0x20220000 0x20220000 ++ 0 0xfde0000>; /* non-prefetchable memory */ + + interrupts = ; + interrupt-names = "msi"; +@@ -891,28 +893,30 @@ + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, +- <&gcc GCC_PCIE0_AHB_CLK>, +- <&gcc GCC_PCIE0_AUX_CLK>; +- ++ <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, ++ <&gcc GCC_PCIE0_RCHNG_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", +- "ahb", +- "aux"; ++ "axi_bridge", ++ "rchng"; ++ + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, +- <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>; ++ <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, ++ <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", +- "axi_m_sticky"; ++ "axi_m_sticky", ++ "axi_s_sticky"; + status = "disabled"; + }; + }; diff --git a/target/linux/ipq807x/patches-5.15/0109-arm64-dts-qcom-ipq8074-correct-PCIe-QMP-PHY-output-c.patch b/target/linux/ipq807x/patches-5.15/0109-arm64-dts-qcom-ipq8074-correct-PCIe-QMP-PHY-output-c.patch new file mode 100644 index 0000000000..9bd4a6fa75 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0109-arm64-dts-qcom-ipq8074-correct-PCIe-QMP-PHY-output-c.patch @@ -0,0 +1,40 @@ +From 0311903940046649e20bd23bca837169eb4525dc Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 16 Nov 2022 22:48:41 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock + names + +Current PCIe QMP PHY output name were changed in ("arm64: dts: qcom: Fix +IPQ8074 PCIe PHY nodes") however it did not account for the fact that GCC +driver is relying on the old names to match them as they are being used as +the parent for the gcc_pcie0_pipe_clk and gcc_pcie1_pipe_clk. + +This broke parenting as GCC could not find the parent clock, so fix it by +changing to the names that driver is expecting. + +Fixes: 942bcd33ed45 ("arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodes") +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -257,7 +257,7 @@ + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe0"; +- clock-output-names = "pcie_0_pipe_clk"; ++ clock-output-names = "pcie20_phy0_pipe_clk"; + }; + }; + +@@ -285,7 +285,7 @@ + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "pipe0"; +- clock-output-names = "pcie_1_pipe_clk"; ++ clock-output-names = "pcie20_phy1_pipe_clk"; + }; + }; + diff --git a/target/linux/ipq807x/patches-5.15/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch b/target/linux/ipq807x/patches-5.15/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch new file mode 100644 index 0000000000..69d4126f76 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch @@ -0,0 +1,30 @@ +From 8a576b5bc9f0555d1d970cacabcaa24a3b74fa57 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 16 Nov 2022 22:15:01 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: pass QMP PCI PHY PIPE clocks to + GCC + +Pass QMP PCI PHY PIPE clocks to the GCC controller so it does not have to +find them by matching globaly by name. + +If not passed directly, driver maintains backwards compatibility by then +falling back to global lookup. + +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -396,8 +396,8 @@ + gcc: gcc@1800000 { + compatible = "qcom,gcc-ipq8074"; + reg = <0x01800000 0x80000>; +- clocks = <&xo>, <&sleep_clk>; +- clock-names = "xo", "sleep_clk"; ++ clocks = <&xo>, <&sleep_clk>, <&pcie_phy0>, <&pcie_phy1>; ++ clock-names = "xo", "sleep_clk", "pcie0_pipe", "pcie1_pipe"; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; diff --git a/target/linux/ipq807x/patches-5.15/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch b/target/linux/ipq807x/patches-5.15/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch new file mode 100644 index 0000000000..d38e9dab31 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch @@ -0,0 +1,43 @@ +From fb1f6850be00d8dd8a54017be4c1336e224069ac Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 16 Nov 2022 22:26:25 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: use msi-parent for PCIe + +Instead of hardcoding the IRQ, simply use msi-parent instead. + +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 +++----- + 1 file changed, 3 insertions(+), 5 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -699,7 +699,7 @@ + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + ranges = <0 0xb00a000 0xffd>; + +- v2m@0 { ++ gic_v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0xffd>; +@@ -813,8 +813,7 @@ + <0x82000000 0 0x10220000 0x10220000 + 0 0xfde0000>; /* non-prefetchable memory */ + +- interrupts = ; +- interrupt-names = "msi"; ++ msi-parent = <&gic_v2m0>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 +@@ -877,8 +876,7 @@ + <0x82000000 0 0x20220000 0x20220000 + 0 0xfde0000>; /* non-prefetchable memory */ + +- interrupts = ; +- interrupt-names = "msi"; ++ msi-parent = <&gic_v2m0>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 diff --git a/target/linux/ipq807x/patches-5.15/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch b/target/linux/ipq807x/patches-5.15/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch new file mode 100644 index 0000000000..2124bfa3f1 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch @@ -0,0 +1,155 @@ +From 125681433c8e526356947acf572fe8ca8ad32291 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy +Date: Sat, 30 Jan 2021 10:50:05 +0530 +Subject: [PATCH] remoteproc: qcom: Add PRNG proxy clock + +PRNG clock is needed by the secure PIL, support for the same +is added in subsequent patches. + +Signed-off-by: Gokul Sriram Palanisamy +Signed-off-by: Sricharan R +Signed-off-by: Nikhil Prakash V +--- + drivers/remoteproc/qcom_q6v5_wcss.c | 65 +++++++++++++++++++++-------- + 1 file changed, 47 insertions(+), 18 deletions(-) + +--- a/drivers/remoteproc/qcom_q6v5_wcss.c ++++ b/drivers/remoteproc/qcom_q6v5_wcss.c +@@ -91,19 +91,6 @@ enum { + WCSS_QCS404, + }; + +-struct wcss_data { +- const char *firmware_name; +- unsigned int crash_reason_smem; +- u32 version; +- bool aon_reset_required; +- bool wcss_q6_reset_required; +- const char *ssr_name; +- const char *sysmon_name; +- int ssctl_id; +- const struct rproc_ops *ops; +- bool requires_force_stop; +-}; +- + struct q6v5_wcss { + struct device *dev; + +@@ -128,6 +115,7 @@ struct q6v5_wcss { + struct clk *qdsp6ss_xo_cbcr; + struct clk *qdsp6ss_core_gfmux; + struct clk *lcc_bcr_sleep; ++ struct clk *prng_clk; + struct regulator *cx_supply; + struct qcom_sysmon *sysmon; + +@@ -151,6 +139,21 @@ struct q6v5_wcss { + struct qcom_rproc_ssr ssr_subdev; + }; + ++struct wcss_data { ++ int (*init_clock)(struct q6v5_wcss *wcss); ++ int (*init_regulator)(struct q6v5_wcss *wcss); ++ const char *firmware_name; ++ unsigned int crash_reason_smem; ++ u32 version; ++ bool aon_reset_required; ++ bool wcss_q6_reset_required; ++ const char *ssr_name; ++ const char *sysmon_name; ++ int ssctl_id; ++ const struct rproc_ops *ops; ++ bool requires_force_stop; ++}; ++ + static int q6v5_wcss_reset(struct q6v5_wcss *wcss) + { + int ret; +@@ -240,6 +243,12 @@ static int q6v5_wcss_start(struct rproc + struct q6v5_wcss *wcss = rproc->priv; + int ret; + ++ ret = clk_prepare_enable(wcss->prng_clk); ++ if (ret) { ++ dev_err(wcss->dev, "prng clock enable failed\n"); ++ return ret; ++ } ++ + qcom_q6v5_prepare(&wcss->q6v5); + + /* Release Q6 and WCSS reset */ +@@ -733,6 +742,7 @@ static int q6v5_wcss_stop(struct rproc * + return ret; + } + ++ clk_disable_unprepare(wcss->prng_clk); + qcom_q6v5_unprepare(&wcss->q6v5); + + return 0; +@@ -900,7 +910,21 @@ static int q6v5_alloc_memory_region(stru + return 0; + } + +-static int q6v5_wcss_init_clock(struct q6v5_wcss *wcss) ++static int ipq8074_init_clock(struct q6v5_wcss *wcss) ++{ ++ int ret; ++ ++ wcss->prng_clk = devm_clk_get(wcss->dev, "prng"); ++ if (IS_ERR(wcss->prng_clk)) { ++ ret = PTR_ERR(wcss->prng_clk); ++ if (ret != -EPROBE_DEFER) ++ dev_err(wcss->dev, "Failed to get prng clock\n"); ++ return ret; ++ } ++ return 0; ++} ++ ++static int qcs404_init_clock(struct q6v5_wcss *wcss) + { + int ret; + +@@ -990,7 +1014,7 @@ static int q6v5_wcss_init_clock(struct q + return 0; + } + +-static int q6v5_wcss_init_regulator(struct q6v5_wcss *wcss) ++static int qcs404_init_regulator(struct q6v5_wcss *wcss) + { + wcss->cx_supply = devm_regulator_get(wcss->dev, "cx"); + if (IS_ERR(wcss->cx_supply)) +@@ -1034,12 +1058,14 @@ static int q6v5_wcss_probe(struct platfo + if (ret) + goto free_rproc; + +- if (wcss->version == WCSS_QCS404) { +- ret = q6v5_wcss_init_clock(wcss); ++ if (desc->init_clock) { ++ ret = desc->init_clock(wcss); + if (ret) + goto free_rproc; ++ } + +- ret = q6v5_wcss_init_regulator(wcss); ++ if (desc->init_regulator) { ++ ret = desc->init_regulator(wcss); + if (ret) + goto free_rproc; + } +@@ -1086,6 +1112,7 @@ static int q6v5_wcss_remove(struct platf + } + + static const struct wcss_data wcss_ipq8074_res_init = { ++ .init_clock = ipq8074_init_clock, + .firmware_name = "IPQ8074/q6_fw.mdt", + .crash_reason_smem = WCSS_CRASH_REASON, + .aon_reset_required = true, +@@ -1095,6 +1122,8 @@ static const struct wcss_data wcss_ipq80 + }; + + static const struct wcss_data wcss_qcs404_res_init = { ++ .init_clock = qcs404_init_clock, ++ .init_regulator = qcs404_init_regulator, + .crash_reason_smem = WCSS_CRASH_REASON, + .firmware_name = "wcnss.mdt", + .version = WCSS_QCS404, diff --git a/target/linux/ipq807x/patches-5.15/0113-remoteproc-qcom-Add-secure-PIL-support.patch b/target/linux/ipq807x/patches-5.15/0113-remoteproc-qcom-Add-secure-PIL-support.patch new file mode 100644 index 0000000000..1d415942e0 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0113-remoteproc-qcom-Add-secure-PIL-support.patch @@ -0,0 +1,143 @@ +From 7358d42dfbdfdb5d4f1d0d4c2e5c2bb4143a29b0 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy +Date: Sat, 30 Jan 2021 10:50:06 +0530 +Subject: [PATCH] remoteproc: qcom: Add secure PIL support + +IPQ8074 uses secure PIL. Hence, adding the support for the same. + +Signed-off-by: Gokul Sriram Palanisamy +Signed-off-by: Sricharan R +Signed-off-by: Nikhil Prakash V +--- + drivers/remoteproc/qcom_q6v5_wcss.c | 43 +++++++++++++++++++++++++++-- + 1 file changed, 40 insertions(+), 3 deletions(-) + +--- a/drivers/remoteproc/qcom_q6v5_wcss.c ++++ b/drivers/remoteproc/qcom_q6v5_wcss.c +@@ -18,6 +18,7 @@ + #include + #include + #include ++#include + #include "qcom_common.h" + #include "qcom_pil_info.h" + #include "qcom_q6v5.h" +@@ -86,6 +87,9 @@ + #define TCSR_WCSS_CLK_ENABLE 0x14 + + #define MAX_HALT_REG 3 ++ ++#define WCNSS_PAS_ID 6 ++ + enum { + WCSS_IPQ8074, + WCSS_QCS404, +@@ -134,6 +138,7 @@ struct q6v5_wcss { + unsigned int crash_reason_smem; + u32 version; + bool requires_force_stop; ++ bool need_mem_protection; + + struct qcom_rproc_glink glink_subdev; + struct qcom_rproc_ssr ssr_subdev; +@@ -152,6 +157,7 @@ struct wcss_data { + int ssctl_id; + const struct rproc_ops *ops; + bool requires_force_stop; ++ bool need_mem_protection; + }; + + static int q6v5_wcss_reset(struct q6v5_wcss *wcss) +@@ -251,6 +257,15 @@ static int q6v5_wcss_start(struct rproc + + qcom_q6v5_prepare(&wcss->q6v5); + ++ if (wcss->need_mem_protection) { ++ ret = qcom_scm_pas_auth_and_reset(WCNSS_PAS_ID); ++ if (ret) { ++ dev_err(wcss->dev, "wcss_reset failed\n"); ++ return ret; ++ } ++ goto wait_for_reset; ++ } ++ + /* Release Q6 and WCSS reset */ + ret = reset_control_deassert(wcss->wcss_reset); + if (ret) { +@@ -285,6 +300,7 @@ static int q6v5_wcss_start(struct rproc + if (ret) + goto wcss_q6_reset; + ++wait_for_reset: + ret = qcom_q6v5_wait_for_start(&wcss->q6v5, 5 * HZ); + if (ret == -ETIMEDOUT) + dev_err(wcss->dev, "start timed out\n"); +@@ -718,6 +734,15 @@ static int q6v5_wcss_stop(struct rproc * + struct q6v5_wcss *wcss = rproc->priv; + int ret; + ++ if (wcss->need_mem_protection) { ++ ret = qcom_scm_pas_shutdown(WCNSS_PAS_ID); ++ if (ret) { ++ dev_err(wcss->dev, "not able to shutdown\n"); ++ return ret; ++ } ++ goto pas_done; ++ } ++ + /* WCSS powerdown */ + if (wcss->requires_force_stop) { + ret = qcom_q6v5_request_stop(&wcss->q6v5, NULL); +@@ -742,6 +767,7 @@ static int q6v5_wcss_stop(struct rproc * + return ret; + } + ++pas_done: + clk_disable_unprepare(wcss->prng_clk); + qcom_q6v5_unprepare(&wcss->q6v5); + +@@ -765,9 +791,15 @@ static int q6v5_wcss_load(struct rproc * + struct q6v5_wcss *wcss = rproc->priv; + int ret; + +- ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware, +- 0, wcss->mem_region, wcss->mem_phys, +- wcss->mem_size, &wcss->mem_reloc); ++ if (wcss->need_mem_protection) ++ ret = qcom_mdt_load(wcss->dev, fw, rproc->firmware, ++ WCNSS_PAS_ID, wcss->mem_region, ++ wcss->mem_phys, wcss->mem_size, ++ &wcss->mem_reloc); ++ else ++ ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware, ++ 0, wcss->mem_region, wcss->mem_phys, ++ wcss->mem_size, &wcss->mem_reloc); + if (ret) + return ret; + +@@ -1036,6 +1068,9 @@ static int q6v5_wcss_probe(struct platfo + if (!desc) + return -EINVAL; + ++ if (desc->need_mem_protection && !qcom_scm_is_available()) ++ return -EPROBE_DEFER; ++ + rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops, + desc->firmware_name, sizeof(*wcss)); + if (!rproc) { +@@ -1049,6 +1084,7 @@ static int q6v5_wcss_probe(struct platfo + + wcss->version = desc->version; + wcss->requires_force_stop = desc->requires_force_stop; ++ wcss->need_mem_protection = desc->need_mem_protection; + + ret = q6v5_wcss_init_mmio(wcss, pdev); + if (ret) +@@ -1119,6 +1155,7 @@ static const struct wcss_data wcss_ipq80 + .wcss_q6_reset_required = true, + .ops = &q6v5_wcss_ipq8074_ops, + .requires_force_stop = true, ++ .need_mem_protection = true, + }; + + static const struct wcss_data wcss_qcs404_res_init = { diff --git a/target/linux/ipq807x/patches-5.15/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch b/target/linux/ipq807x/patches-5.15/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch new file mode 100644 index 0000000000..1231824af0 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch @@ -0,0 +1,103 @@ +From b422c9d4f048b086ce83f44a7cfcddcce162897f Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy +Date: Sat, 30 Jan 2021 10:50:07 +0530 +Subject: [PATCH] remoteproc: qcom: Add support for split q6 + m3 wlan firmware + +IPQ8074 supports split firmware for q6 and m3 as well. +So add support for loading the m3 firmware before q6. +Now the drivers works fine for both split and unified +firmwares. + +Signed-off-by: Gokul Sriram Palanisamy +Signed-off-by: Sricharan R +Signed-off-by: Nikhil Prakash V +--- + drivers/remoteproc/qcom_q6v5_wcss.c | 33 +++++++++++++++++++++++++---- + 1 file changed, 29 insertions(+), 4 deletions(-) + +--- a/drivers/remoteproc/qcom_q6v5_wcss.c ++++ b/drivers/remoteproc/qcom_q6v5_wcss.c +@@ -139,6 +139,7 @@ struct q6v5_wcss { + u32 version; + bool requires_force_stop; + bool need_mem_protection; ++ const char *m3_firmware_name; + + struct qcom_rproc_glink glink_subdev; + struct qcom_rproc_ssr ssr_subdev; +@@ -147,7 +148,8 @@ struct q6v5_wcss { + struct wcss_data { + int (*init_clock)(struct q6v5_wcss *wcss); + int (*init_regulator)(struct q6v5_wcss *wcss); +- const char *firmware_name; ++ const char *q6_firmware_name; ++ const char *m3_firmware_name; + unsigned int crash_reason_smem; + u32 version; + bool aon_reset_required; +@@ -789,8 +791,29 @@ static void *q6v5_wcss_da_to_va(struct r + static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw) + { + struct q6v5_wcss *wcss = rproc->priv; ++ const struct firmware *m3_fw; + int ret; + ++ if (wcss->m3_firmware_name) { ++ ret = request_firmware(&m3_fw, wcss->m3_firmware_name, ++ wcss->dev); ++ if (ret) ++ goto skip_m3; ++ ++ ret = qcom_mdt_load_no_init(wcss->dev, m3_fw, ++ wcss->m3_firmware_name, 0, ++ wcss->mem_region, wcss->mem_phys, ++ wcss->mem_size, &wcss->mem_reloc); ++ ++ release_firmware(m3_fw); ++ ++ if (ret) { ++ dev_err(wcss->dev, "can't load m3_fw.bXX\n"); ++ return ret; ++ } ++ } ++ ++skip_m3: + if (wcss->need_mem_protection) + ret = qcom_mdt_load(wcss->dev, fw, rproc->firmware, + WCNSS_PAS_ID, wcss->mem_region, +@@ -1072,7 +1095,7 @@ static int q6v5_wcss_probe(struct platfo + return -EPROBE_DEFER; + + rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops, +- desc->firmware_name, sizeof(*wcss)); ++ desc->q6_firmware_name, sizeof(*wcss)); + if (!rproc) { + dev_err(&pdev->dev, "failed to allocate rproc\n"); + return -ENOMEM; +@@ -1085,6 +1108,7 @@ static int q6v5_wcss_probe(struct platfo + wcss->version = desc->version; + wcss->requires_force_stop = desc->requires_force_stop; + wcss->need_mem_protection = desc->need_mem_protection; ++ wcss->m3_firmware_name = desc->m3_firmware_name; + + ret = q6v5_wcss_init_mmio(wcss, pdev); + if (ret) +@@ -1149,7 +1173,8 @@ static int q6v5_wcss_remove(struct platf + + static const struct wcss_data wcss_ipq8074_res_init = { + .init_clock = ipq8074_init_clock, +- .firmware_name = "IPQ8074/q6_fw.mdt", ++ .q6_firmware_name = "IPQ8074/q6_fw.mdt", ++ .m3_firmware_name = "IPQ8074/m3_fw.mdt", + .crash_reason_smem = WCSS_CRASH_REASON, + .aon_reset_required = true, + .wcss_q6_reset_required = true, +@@ -1162,7 +1187,7 @@ static const struct wcss_data wcss_qcs40 + .init_clock = qcs404_init_clock, + .init_regulator = qcs404_init_regulator, + .crash_reason_smem = WCSS_CRASH_REASON, +- .firmware_name = "wcnss.mdt", ++ .q6_firmware_name = "wcnss.mdt", + .version = WCSS_QCS404, + .aon_reset_required = false, + .wcss_q6_reset_required = false, diff --git a/target/linux/ipq807x/patches-5.15/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch b/target/linux/ipq807x/patches-5.15/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch new file mode 100644 index 0000000000..0ff2d0358b --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch @@ -0,0 +1,24 @@ +From 3a8f67b4770c817b04794c9a02e3f88f85d86280 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy +Date: Sat, 30 Jan 2021 10:50:08 +0530 +Subject: [PATCH] remoteproc: qcom: Add ssr subdevice identifier + +Add name for ssr subdevice on IPQ8074 SoC. + +Signed-off-by: Gokul Sriram Palanisamy +Signed-off-by: Sricharan R +Signed-off-by: Nikhil Prakash V +--- + drivers/remoteproc/qcom_q6v5_wcss.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/remoteproc/qcom_q6v5_wcss.c ++++ b/drivers/remoteproc/qcom_q6v5_wcss.c +@@ -1178,6 +1178,7 @@ static const struct wcss_data wcss_ipq80 + .crash_reason_smem = WCSS_CRASH_REASON, + .aon_reset_required = true, + .wcss_q6_reset_required = true, ++ .ssr_name = "q6wcss", + .ops = &q6v5_wcss_ipq8074_ops, + .requires_force_stop = true, + .need_mem_protection = true, diff --git a/target/linux/ipq807x/patches-5.15/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch b/target/linux/ipq807x/patches-5.15/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch new file mode 100644 index 0000000000..c8e5aceefc --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch @@ -0,0 +1,79 @@ +From 8c73af6e8d78c66cfef0f551b00d375ec0b67ff3 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy +Date: Sat, 30 Jan 2021 10:50:09 +0530 +Subject: [PATCH] remoteproc: qcom: Update regmap offsets for halt register + +Fixed issue in reading halt-regs parameter from device-tree. + +Signed-off-by: Gokul Sriram Palanisamy +Signed-off-by: Sricharan R +--- + drivers/remoteproc/qcom_q6v5_wcss.c | 22 ++++++++++++++-------- + 1 file changed, 14 insertions(+), 8 deletions(-) + +--- a/drivers/remoteproc/qcom_q6v5_wcss.c ++++ b/drivers/remoteproc/qcom_q6v5_wcss.c +@@ -86,7 +86,7 @@ + #define TCSR_WCSS_CLK_MASK 0x1F + #define TCSR_WCSS_CLK_ENABLE 0x14 + +-#define MAX_HALT_REG 3 ++#define MAX_HALT_REG 4 + + #define WCNSS_PAS_ID 6 + +@@ -154,6 +154,7 @@ struct wcss_data { + u32 version; + bool aon_reset_required; + bool wcss_q6_reset_required; ++ bool bcr_reset_required; + const char *ssr_name; + const char *sysmon_name; + int ssctl_id; +@@ -875,10 +876,13 @@ static int q6v5_wcss_init_reset(struct q + } + } + +- wcss->wcss_q6_bcr_reset = devm_reset_control_get_exclusive(dev, "wcss_q6_bcr_reset"); +- if (IS_ERR(wcss->wcss_q6_bcr_reset)) { +- dev_err(wcss->dev, "unable to acquire wcss_q6_bcr_reset\n"); +- return PTR_ERR(wcss->wcss_q6_bcr_reset); ++ if (desc->bcr_reset_required) { ++ wcss->wcss_q6_bcr_reset = devm_reset_control_get_exclusive(dev, ++ "wcss_q6_bcr_reset"); ++ if (IS_ERR(wcss->wcss_q6_bcr_reset)) { ++ dev_err(wcss->dev, "unable to acquire wcss_q6_bcr_reset\n"); ++ return PTR_ERR(wcss->wcss_q6_bcr_reset); ++ } + } + + return 0; +@@ -929,9 +933,9 @@ static int q6v5_wcss_init_mmio(struct q6 + return -EINVAL; + } + +- wcss->halt_q6 = halt_reg[0]; +- wcss->halt_wcss = halt_reg[1]; +- wcss->halt_nc = halt_reg[2]; ++ wcss->halt_q6 = halt_reg[1]; ++ wcss->halt_wcss = halt_reg[2]; ++ wcss->halt_nc = halt_reg[3]; + + return 0; + } +@@ -1178,6 +1182,7 @@ static const struct wcss_data wcss_ipq80 + .crash_reason_smem = WCSS_CRASH_REASON, + .aon_reset_required = true, + .wcss_q6_reset_required = true, ++ .bcr_reset_required = false, + .ssr_name = "q6wcss", + .ops = &q6v5_wcss_ipq8074_ops, + .requires_force_stop = true, +@@ -1192,6 +1197,7 @@ static const struct wcss_data wcss_qcs40 + .version = WCSS_QCS404, + .aon_reset_required = false, + .wcss_q6_reset_required = false, ++ .bcr_reset_required = true, + .ssr_name = "mpss", + .sysmon_name = "wcnss", + .ssctl_id = 0x12, diff --git a/target/linux/ipq807x/patches-5.15/0117-dt-bindings-clock-qcom-Add-reset-for-WCSSAON.patch b/target/linux/ipq807x/patches-5.15/0117-dt-bindings-clock-qcom-Add-reset-for-WCSSAON.patch new file mode 100644 index 0000000000..fe0e0f9e0b --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0117-dt-bindings-clock-qcom-Add-reset-for-WCSSAON.patch @@ -0,0 +1,26 @@ +From ff7c6533ed8c4de58ed6c8aab03ea59c03eb4f31 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy +Date: Sat, 30 Jan 2021 10:50:10 +0530 +Subject: [PATCH] dt-bindings: clock: qcom: Add reset for WCSSAON + +Add binding for WCSSAON reset required for Q6v5 reset on IPQ8074 SoC. + +Signed-off-by: Gokul Sriram Palanisamy +Signed-off-by: Sricharan R +Signed-off-by: Nikhil Prakash V +Acked-by: Rob Herring +Acked-by: Stephen Boyd +--- + include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 + + 1 file changed, 1 insertion(+) + +--- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h ++++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h +@@ -381,6 +381,7 @@ + #define GCC_NSSPORT4_RESET 143 + #define GCC_NSSPORT5_RESET 144 + #define GCC_NSSPORT6_RESET 145 ++#define GCC_WCSSAON_RESET 146 + + #define USB0_GDSC 0 + #define USB1_GDSC 1 diff --git a/target/linux/ipq807x/patches-5.15/0118-clk-qcom-Add-WCSSAON-reset.patch b/target/linux/ipq807x/patches-5.15/0118-clk-qcom-Add-WCSSAON-reset.patch new file mode 100644 index 0000000000..791531775e --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0118-clk-qcom-Add-WCSSAON-reset.patch @@ -0,0 +1,25 @@ +From 43d9788f546d24df22d8ba3fcc2497d7ccc198f3 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy +Date: Sat, 30 Jan 2021 10:50:11 +0530 +Subject: [PATCH] clk: qcom: Add WCSSAON reset + +Add WCSSAON reset required for Q6v5 on IPQ8074 SoC. + +Signed-off-by: Gokul Sriram Palanisamy +Signed-off-by: Sricharan R +Signed-off-by: Nikhil Prakash V +Acked-by: Stephen Boyd +--- + drivers/clk/qcom/gcc-ipq8074.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -4717,6 +4717,7 @@ static const struct qcom_reset_map gcc_i + [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = BIT(27) | GENMASK(9, 8) }, + [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = BIT(28) | GENMASK(11, 10) }, + [GCC_NSSPORT6_RESET] = { .reg = 0x68014, .bitmask = BIT(29) | GENMASK(13, 12) }, ++ [GCC_WCSSAON_RESET] = { 0x59010, 0 }, + }; + + static struct gdsc *gcc_ipq8074_gdscs[] = { diff --git a/target/linux/ipq807x/patches-5.15/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch b/target/linux/ipq807x/patches-5.15/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch new file mode 100644 index 0000000000..a562f7864e --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch @@ -0,0 +1,48 @@ +From 406a332fd1bcc4e18d73cce390f56272fe9111d7 Mon Sep 17 00:00:00 2001 +From: Sivaprakash Murugesan +Date: Fri, 17 Apr 2020 16:37:10 +0530 +Subject: [PATCH] remoteproc: wcss: disable auto boot for IPQ8074 + +There is no need for remoteproc to boot automatically, ath11k will trigger +booting when its probing. + +Signed-off-by: Sivaprakash Murugesan +Signed-off-by: Robert Marko +--- + drivers/remoteproc/qcom_q6v5_wcss.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/remoteproc/qcom_q6v5_wcss.c ++++ b/drivers/remoteproc/qcom_q6v5_wcss.c +@@ -161,6 +161,7 @@ struct wcss_data { + const struct rproc_ops *ops; + bool requires_force_stop; + bool need_mem_protection; ++ bool need_auto_boot; + }; + + static int q6v5_wcss_reset(struct q6v5_wcss *wcss) +@@ -1151,6 +1152,7 @@ static int q6v5_wcss_probe(struct platfo + desc->sysmon_name, + desc->ssctl_id); + ++ rproc->auto_boot = desc->need_auto_boot; + ret = rproc_add(rproc); + if (ret) + goto free_rproc; +@@ -1187,6 +1189,7 @@ static const struct wcss_data wcss_ipq80 + .ops = &q6v5_wcss_ipq8074_ops, + .requires_force_stop = true, + .need_mem_protection = true, ++ .need_auto_boot = false, + }; + + static const struct wcss_data wcss_qcs404_res_init = { +@@ -1203,6 +1206,7 @@ static const struct wcss_data wcss_qcs40 + .ssctl_id = 0x12, + .ops = &q6v5_wcss_qcs404_ops, + .requires_force_stop = false, ++ .need_auto_boot = true, + }; + + static const struct of_device_id q6v5_wcss_of_match[] = { diff --git a/target/linux/ipq807x/patches-5.15/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch b/target/linux/ipq807x/patches-5.15/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch new file mode 100644 index 0000000000..52d9efc5bf --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch @@ -0,0 +1,120 @@ +From 7388400b8bd42f71d040dbf2fdbdcb834fcc0ede Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy +Date: Sat, 30 Jan 2021 10:50:13 +0530 +Subject: [PATCH] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC + +Enable remoteproc WCSS PIL driver with glink and ssr subdevices. +Also enables smp2p and mailboxes required for IPC. + +Signed-off-by: Gokul Sriram Palanisamy +Signed-off-by: Sricharan R +Signed-off-by: Nikhil Prakash V +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 81 +++++++++++++++++++++++++++ + 1 file changed, 81 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -140,6 +140,32 @@ + }; + }; + ++ wcss: smp2p-wcss { ++ compatible = "qcom,smp2p"; ++ qcom,smem = <435>, <428>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <0 322 1>; ++ ++ mboxes = <&apcs_glb 9>; ++ ++ qcom,local-pid = <0>; ++ qcom,remote-pid = <1>; ++ ++ wcss_smp2p_out: master-kernel { ++ qcom,entry-name = "master-kernel"; ++ qcom,smp2p-feature-ssr-ack; ++ #qcom,smem-state-cells = <1>; ++ }; ++ ++ wcss_smp2p_in: slave-kernel { ++ qcom,entry-name = "slave-kernel"; ++ ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ }; ++ + soc: soc { + #address-cells = <0x1>; + #size-cells = <0x1>; +@@ -409,6 +435,11 @@ + #hwlock-cells = <1>; + }; + ++ tcsr_q6: syscon@1945000 { ++ compatible = "syscon"; ++ reg = <0x01945000 0xe000>; ++ }; ++ + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, +@@ -917,6 +948,56 @@ + "axi_s_sticky"; + status = "disabled"; + }; ++ ++ q6v5_wcss: q6v5_wcss@cd00000 { ++ compatible = "qcom,ipq8074-wcss-pil"; ++ reg = <0x0cd00000 0x4040>, ++ <0x004ab000 0x20>; ++ reg-names = "qdsp6", ++ "rmb"; ++ qca,auto-restart; ++ qca,extended-intc; ++ interrupts-extended = <&intc 0 325 1>, ++ <&wcss_smp2p_in 0 0>, ++ <&wcss_smp2p_in 1 0>, ++ <&wcss_smp2p_in 2 0>, ++ <&wcss_smp2p_in 3 0>; ++ interrupt-names = "wdog", ++ "fatal", ++ "ready", ++ "handover", ++ "stop-ack"; ++ ++ resets = <&gcc GCC_WCSSAON_RESET>, ++ <&gcc GCC_WCSS_BCR>, ++ <&gcc GCC_WCSS_Q6_BCR>; ++ ++ reset-names = "wcss_aon_reset", ++ "wcss_reset", ++ "wcss_q6_reset"; ++ ++ clocks = <&gcc GCC_PRNG_AHB_CLK>; ++ clock-names = "prng"; ++ ++ qcom,halt-regs = <&tcsr_q6 0xa000 0xd000 0x0>; ++ ++ qcom,smem-states = <&wcss_smp2p_out 0>, ++ <&wcss_smp2p_out 1>; ++ qcom,smem-state-names = "shutdown", ++ "stop"; ++ ++ memory-region = <&q6_region>; ++ ++ glink-edge { ++ interrupts = ; ++ qcom,remote-pid = <1>; ++ mboxes = <&apcs_glb 8>; ++ ++ rpm_requests { ++ qcom,glink-channels = "IPCRTR"; ++ }; ++ }; ++ }; + }; + + timer { diff --git a/target/linux/ipq807x/patches-5.15/0121-arm64-dts-ipq8074-Add-WLAN-node.patch b/target/linux/ipq807x/patches-5.15/0121-arm64-dts-ipq8074-Add-WLAN-node.patch new file mode 100644 index 0000000000..da64111890 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0121-arm64-dts-ipq8074-Add-WLAN-node.patch @@ -0,0 +1,135 @@ +From a67d1901741c162645eda0dbdc3a2c0c2aff5cf4 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Tue, 21 Dec 2021 14:49:36 +0100 +Subject: [PATCH] arm64: dts: ipq8074: Add WLAN node + +IPQ8074 has a AHB based Q6v5 802.11ax radios that are supported +by the ath11k. + +Add the required DT node to enable the built-in radios. + +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 111 ++++++++++++++++++++++++++ + 1 file changed, 111 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -998,6 +998,117 @@ + }; + }; + }; ++ ++ wifi: wifi@c0000000 { ++ compatible = "qcom,ipq8074-wifi"; ++ reg = <0xc000000 0x2000000>; ++ ++ interrupts = , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ ; ++ ++ interrupt-names = "misc-pulse1", ++ "misc-latch", ++ "sw-exception", ++ "ce0", ++ "ce1", ++ "ce2", ++ "ce3", ++ "ce4", ++ "ce5", ++ "ce6", ++ "ce7", ++ "ce8", ++ "ce9", ++ "ce10", ++ "ce11", ++ "host2wbm-desc-feed", ++ "host2reo-re-injection", ++ "host2reo-command", ++ "host2rxdma-monitor-ring3", ++ "host2rxdma-monitor-ring2", ++ "host2rxdma-monitor-ring1", ++ "reo2ost-exception", ++ "wbm2host-rx-release", ++ "reo2host-status", ++ "reo2host-destination-ring4", ++ "reo2host-destination-ring3", ++ "reo2host-destination-ring2", ++ "reo2host-destination-ring1", ++ "rxdma2host-monitor-destination-mac3", ++ "rxdma2host-monitor-destination-mac2", ++ "rxdma2host-monitor-destination-mac1", ++ "ppdu-end-interrupts-mac3", ++ "ppdu-end-interrupts-mac2", ++ "ppdu-end-interrupts-mac1", ++ "rxdma2host-monitor-status-ring-mac3", ++ "rxdma2host-monitor-status-ring-mac2", ++ "rxdma2host-monitor-status-ring-mac1", ++ "host2rxdma-host-buf-ring-mac3", ++ "host2rxdma-host-buf-ring-mac2", ++ "host2rxdma-host-buf-ring-mac1", ++ "rxdma2host-destination-ring-mac3", ++ "rxdma2host-destination-ring-mac2", ++ "rxdma2host-destination-ring-mac1", ++ "host2tcl-input-ring4", ++ "host2tcl-input-ring3", ++ "host2tcl-input-ring2", ++ "host2tcl-input-ring1", ++ "wbm2host-tx-completions-ring3", ++ "wbm2host-tx-completions-ring2", ++ "wbm2host-tx-completions-ring1", ++ "tcl2host-status-ring"; ++ qcom,rproc = <&q6v5_wcss>; ++ status = "disabled"; ++ }; + }; + + timer { diff --git a/target/linux/ipq807x/patches-5.15/0122-arm64-dts-ipq8074-add-CPU-clock.patch b/target/linux/ipq807x/patches-5.15/0122-arm64-dts-ipq8074-add-CPU-clock.patch new file mode 100644 index 0000000000..a3c5f344ab --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0122-arm64-dts-ipq8074-add-CPU-clock.patch @@ -0,0 +1,59 @@ +From cb3ef99c1553565e1dc0301ccd5c1c0fa2d15c15 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 31 Dec 2021 17:56:14 +0100 +Subject: [PATCH] arm64: dts: ipq8074: add CPU clock + +Now that CPU clock is exposed and can be controlled, add the necessary +properties to the CPU nodes. + +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -5,6 +5,7 @@ + + #include + #include ++#include + + / { + #address-cells = <2>; +@@ -38,6 +39,8 @@ + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; ++ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; ++ clock-names = "cpu"; + }; + + CPU1: cpu@1 { +@@ -46,6 +49,8 @@ + enable-method = "psci"; + reg = <0x1>; + next-level-cache = <&L2_0>; ++ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; ++ clock-names = "cpu"; + }; + + CPU2: cpu@2 { +@@ -54,6 +59,8 @@ + enable-method = "psci"; + reg = <0x2>; + next-level-cache = <&L2_0>; ++ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; ++ clock-names = "cpu"; + }; + + CPU3: cpu@3 { +@@ -62,6 +69,8 @@ + enable-method = "psci"; + reg = <0x3>; + next-level-cache = <&L2_0>; ++ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; ++ clock-names = "cpu"; + }; + + L2_0: l2-cache { diff --git a/target/linux/ipq807x/patches-5.15/0123-arm64-dts-ipq8074-add-cooling-cells-to-CPU-nodes.patch b/target/linux/ipq807x/patches-5.15/0123-arm64-dts-ipq8074-add-cooling-cells-to-CPU-nodes.patch new file mode 100644 index 0000000000..3520b38134 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0123-arm64-dts-ipq8074-add-cooling-cells-to-CPU-nodes.patch @@ -0,0 +1,48 @@ +From 347ca56e86c99021fad059b9a8ef101245b8507e Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 31 Dec 2021 20:38:06 +0100 +Subject: [PATCH] arm64: dts: ipq8074: add cooling cells to CPU nodes + +Since there is CPU Freq support as well as thermal sensor support +now for the IPQ8074, add cooling cells to CPU nodes so that they can +be used as cooling devices using CPU Freq. + +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -41,6 +41,7 @@ + enable-method = "psci"; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; ++ #cooling-cells = <2>; + }; + + CPU1: cpu@1 { +@@ -51,6 +52,7 @@ + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; ++ #cooling-cells = <2>; + }; + + CPU2: cpu@2 { +@@ -61,6 +63,7 @@ + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; ++ #cooling-cells = <2>; + }; + + CPU3: cpu@3 { +@@ -71,6 +74,7 @@ + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; ++ #cooling-cells = <2>; + }; + + L2_0: l2-cache { diff --git a/target/linux/ipq807x/patches-5.15/0124-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch b/target/linux/ipq807x/patches-5.15/0124-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch new file mode 100644 index 0000000000..30f6e988aa --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0124-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch @@ -0,0 +1,168 @@ +From 97505f4c049fa2e8c86a53411a9e599033898533 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sat, 31 Dec 2022 00:27:42 +0100 +Subject: [PATCH] soc: qcom: socinfo: move SMEM item struct and defines to a + header + +Move SMEM item struct and related defines to a header in order to be able +to reuse them in the Qualcomm NVMEM CPUFreq driver instead of duplicating +them. + +Signed-off-by: Robert Marko +--- + drivers/soc/qcom/socinfo.c | 58 +-------------------------- + include/linux/soc/qcom/socinfo.h | 67 ++++++++++++++++++++++++++++++++ + 2 files changed, 68 insertions(+), 57 deletions(-) + create mode 100644 include/linux/soc/qcom/socinfo.h + +--- a/drivers/soc/qcom/socinfo.c ++++ b/drivers/soc/qcom/socinfo.c +@@ -11,6 +11,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -25,15 +26,6 @@ + #define SOCINFO_MINOR(ver) ((ver) & 0xffff) + #define SOCINFO_VERSION(maj, min) ((((maj) & 0xffff) << 16)|((min) & 0xffff)) + +-#define SMEM_SOCINFO_BUILD_ID_LENGTH 32 +-#define SMEM_SOCINFO_CHIP_ID_LENGTH 32 +- +-/* +- * SMEM item id, used to acquire handles to respective +- * SMEM region. +- */ +-#define SMEM_HW_SW_BUILD_ID 137 +- + #ifdef CONFIG_DEBUG_FS + #define SMEM_IMAGE_VERSION_BLOCKS_COUNT 32 + #define SMEM_IMAGE_VERSION_SIZE 4096 +@@ -105,54 +97,6 @@ static const char *const pmic_models[] = + }; + #endif /* CONFIG_DEBUG_FS */ + +-/* Socinfo SMEM item structure */ +-struct socinfo { +- __le32 fmt; +- __le32 id; +- __le32 ver; +- char build_id[SMEM_SOCINFO_BUILD_ID_LENGTH]; +- /* Version 2 */ +- __le32 raw_id; +- __le32 raw_ver; +- /* Version 3 */ +- __le32 hw_plat; +- /* Version 4 */ +- __le32 plat_ver; +- /* Version 5 */ +- __le32 accessory_chip; +- /* Version 6 */ +- __le32 hw_plat_subtype; +- /* Version 7 */ +- __le32 pmic_model; +- __le32 pmic_die_rev; +- /* Version 8 */ +- __le32 pmic_model_1; +- __le32 pmic_die_rev_1; +- __le32 pmic_model_2; +- __le32 pmic_die_rev_2; +- /* Version 9 */ +- __le32 foundry_id; +- /* Version 10 */ +- __le32 serial_num; +- /* Version 11 */ +- __le32 num_pmics; +- __le32 pmic_array_offset; +- /* Version 12 */ +- __le32 chip_family; +- __le32 raw_device_family; +- __le32 raw_device_num; +- /* Version 13 */ +- __le32 nproduct_id; +- char chip_id[SMEM_SOCINFO_CHIP_ID_LENGTH]; +- /* Version 14 */ +- __le32 num_clusters; +- __le32 ncluster_array_offset; +- __le32 num_defective_parts; +- __le32 ndefective_parts_array_offset; +- /* Version 15 */ +- __le32 nmodem_supported; +-}; +- + #ifdef CONFIG_DEBUG_FS + struct socinfo_params { + u32 raw_device_family; +--- /dev/null ++++ b/include/linux/soc/qcom/socinfo.h +@@ -0,0 +1,67 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (c) 2009-2017, The Linux Foundation. All rights reserved. ++ * Copyright (c) 2017-2019, Linaro Ltd. ++ */ ++ ++#ifndef __QCOM_SOCINFO_H__ ++#define __QCOM_SOCINFO_H__ ++ ++/* ++ * SMEM item id, used to acquire handles to respective ++ * SMEM region. ++ */ ++#define SMEM_HW_SW_BUILD_ID 137 ++ ++#define SMEM_SOCINFO_BUILD_ID_LENGTH 32 ++#define SMEM_SOCINFO_CHIP_ID_LENGTH 32 ++ ++/* Socinfo SMEM item structure */ ++struct socinfo { ++ __le32 fmt; ++ __le32 id; ++ __le32 ver; ++ char build_id[SMEM_SOCINFO_BUILD_ID_LENGTH]; ++ /* Version 2 */ ++ __le32 raw_id; ++ __le32 raw_ver; ++ /* Version 3 */ ++ __le32 hw_plat; ++ /* Version 4 */ ++ __le32 plat_ver; ++ /* Version 5 */ ++ __le32 accessory_chip; ++ /* Version 6 */ ++ __le32 hw_plat_subtype; ++ /* Version 7 */ ++ __le32 pmic_model; ++ __le32 pmic_die_rev; ++ /* Version 8 */ ++ __le32 pmic_model_1; ++ __le32 pmic_die_rev_1; ++ __le32 pmic_model_2; ++ __le32 pmic_die_rev_2; ++ /* Version 9 */ ++ __le32 foundry_id; ++ /* Version 10 */ ++ __le32 serial_num; ++ /* Version 11 */ ++ __le32 num_pmics; ++ __le32 pmic_array_offset; ++ /* Version 12 */ ++ __le32 chip_family; ++ __le32 raw_device_family; ++ __le32 raw_device_num; ++ /* Version 13 */ ++ __le32 nproduct_id; ++ char chip_id[SMEM_SOCINFO_CHIP_ID_LENGTH]; ++ /* Version 14 */ ++ __le32 num_clusters; ++ __le32 ncluster_array_offset; ++ __le32 num_defective_parts; ++ __le32 ndefective_parts_array_offset; ++ /* Version 15 */ ++ __le32 nmodem_supported; ++}; ++ ++#endif diff --git a/target/linux/ipq807x/patches-5.15/0125-cpufreq-qcom-nvmem-reuse-socinfo-SMEM-item-struct.patch b/target/linux/ipq807x/patches-5.15/0125-cpufreq-qcom-nvmem-reuse-socinfo-SMEM-item-struct.patch new file mode 100644 index 0000000000..aa7fe5a868 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0125-cpufreq-qcom-nvmem-reuse-socinfo-SMEM-item-struct.patch @@ -0,0 +1,50 @@ +From b7b7ea3a0cab42d4f1d4c9ae9eb7c7a3d03e7982 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 30 Dec 2022 22:51:47 +0100 +Subject: [PATCH] cpufreq: qcom-nvmem: reuse socinfo SMEM item struct + +Now that socinfo SMEM item struct and defines have been moved to a header +so we can utilize that instead. + +Now the SMEM value can be accesed directly, there is no need for defining +the ID for the SMEM request as well. + +Signed-off-by: Robert Marko +--- + drivers/cpufreq/qcom-cpufreq-nvmem.c | 14 +++++--------- + 1 file changed, 5 insertions(+), 9 deletions(-) + +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -28,8 +28,7 @@ + #include + #include + #include +- +-#define MSM_ID_SMEM 137 ++#include + + enum _msm_id { + MSM8996V3 = 0xF6ul, +@@ -145,17 +144,14 @@ static void get_krait_bin_format_b(struc + static enum _msm8996_version qcom_cpufreq_get_msm_id(void) + { + size_t len; +- u32 *msm_id; ++ struct socinfo *info; + enum _msm8996_version version; + +- msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len); +- if (IS_ERR(msm_id)) ++ info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID, &len); ++ if (IS_ERR(info)) + return NUM_OF_MSM8996_VERSIONS; + +- /* The first 4 bytes are format, next to them is the actual msm-id */ +- msm_id++; +- +- switch ((enum _msm_id)*msm_id) { ++ switch (info->id) { + case MSM8996V3: + case APQ8096V3: + version = MSM8996_V3; diff --git a/target/linux/ipq807x/patches-5.15/0126-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch b/target/linux/ipq807x/patches-5.15/0126-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch new file mode 100644 index 0000000000..3303b40277 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0126-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch @@ -0,0 +1,46 @@ +From 132b2f15b8ae3f848b3e6f2962f409cfab0ca759 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 30 Dec 2022 23:33:47 +0100 +Subject: [PATCH] cpufreq: qcom-nvmem: use SoC ID-s from bindings + +SMEM SoC ID-s are now stored in DT bindings so lets use those instead of +defining them in the driver again. + +Signed-off-by: Robert Marko +--- + drivers/cpufreq/qcom-cpufreq-nvmem.c | 15 +++++---------- + 1 file changed, 5 insertions(+), 10 deletions(-) + +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -30,12 +30,7 @@ + #include + #include + +-enum _msm_id { +- MSM8996V3 = 0xF6ul, +- APQ8096V3 = 0x123ul, +- MSM8996SG = 0x131ul, +- APQ8096SG = 0x138ul, +-}; ++#include + + enum _msm8996_version { + MSM8996_V3, +@@ -152,12 +147,12 @@ static enum _msm8996_version qcom_cpufre + return NUM_OF_MSM8996_VERSIONS; + + switch (info->id) { +- case MSM8996V3: +- case APQ8096V3: ++ case QCOM_ID_MSM8996: ++ case QCOM_ID_APQ8096: + version = MSM8996_V3; + break; +- case MSM8996SG: +- case APQ8096SG: ++ case QCOM_ID_MSM8996SG: ++ case QCOM_ID_APQ8096SG: + version = MSM8996_SG; + break; + default: diff --git a/target/linux/ipq807x/patches-5.15/0127-cpufreq-qcom-nvmem-make-qcom_cpufreq_get_msm_id-retu.patch b/target/linux/ipq807x/patches-5.15/0127-cpufreq-qcom-nvmem-make-qcom_cpufreq_get_msm_id-retu.patch new file mode 100644 index 0000000000..768866b1b2 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0127-cpufreq-qcom-nvmem-make-qcom_cpufreq_get_msm_id-retu.patch @@ -0,0 +1,106 @@ +From 85bf71b130ab0e939f53ec9cf1131d67d148bc9a Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sat, 31 Dec 2022 12:45:31 +0100 +Subject: [PATCH] cpufreq: qcom-nvmem: make qcom_cpufreq_get_msm_id() return + the SoC ID + +Currently, qcom_cpufreq_get_msm_id() does not simply return the SoC ID +after getting it via SMEM call but instead uses an enum to encode the +matched SMEM ID to 2 variants of MSM8996 which are then used in +qcom_cpufreq_kryo_name_version() to set the supported version. + +This prevents qcom_cpufreq_get_msm_id() from being universal and its doing +more than its name suggests, so lets make it just return the SoC ID +directly which allows matching directly on the SoC ID and removes the need +for msm8996_version enum which simplifies the driver. +It also allows reusing the qcom_cpufreq_get_msm_id() for new SoC-s. + +Signed-off-by: Robert Marko +--- + drivers/cpufreq/qcom-cpufreq-nvmem.c | 44 ++++++++-------------------- + 1 file changed, 12 insertions(+), 32 deletions(-) + +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -32,12 +32,6 @@ + + #include + +-enum _msm8996_version { +- MSM8996_V3, +- MSM8996_SG, +- NUM_OF_MSM8996_VERSIONS, +-}; +- + struct qcom_cpufreq_drv; + + struct qcom_cpufreq_match_data { +@@ -136,30 +130,16 @@ static void get_krait_bin_format_b(struc + dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver); + } + +-static enum _msm8996_version qcom_cpufreq_get_msm_id(void) ++static int qcom_cpufreq_get_msm_id(void) + { + size_t len; + struct socinfo *info; +- enum _msm8996_version version; + + info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID, &len); + if (IS_ERR(info)) +- return NUM_OF_MSM8996_VERSIONS; +- +- switch (info->id) { +- case QCOM_ID_MSM8996: +- case QCOM_ID_APQ8096: +- version = MSM8996_V3; +- break; +- case QCOM_ID_MSM8996SG: +- case QCOM_ID_APQ8096SG: +- version = MSM8996_SG; +- break; +- default: +- version = NUM_OF_MSM8996_VERSIONS; +- } ++ return PTR_ERR(info); + +- return version; ++ return info->id; + } + + static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev, +@@ -168,25 +148,25 @@ static int qcom_cpufreq_kryo_name_versio + struct qcom_cpufreq_drv *drv) + { + size_t len; ++ int msm_id; + u8 *speedbin; +- enum _msm8996_version msm8996_version; + *pvs_name = NULL; + +- msm8996_version = qcom_cpufreq_get_msm_id(); +- if (NUM_OF_MSM8996_VERSIONS == msm8996_version) { +- dev_err(cpu_dev, "Not Snapdragon 820/821!"); +- return -ENODEV; +- } ++ msm_id = qcom_cpufreq_get_msm_id(); ++ if (msm_id < 0) ++ return msm_id; + + speedbin = nvmem_cell_read(speedbin_nvmem, &len); + if (IS_ERR(speedbin)) + return PTR_ERR(speedbin); + +- switch (msm8996_version) { +- case MSM8996_V3: ++ switch (msm_id) { ++ case QCOM_ID_MSM8996: ++ case QCOM_ID_APQ8096: + drv->versions = 1 << (unsigned int)(*speedbin); + break; +- case MSM8996_SG: ++ case QCOM_ID_MSM8996SG: ++ case QCOM_ID_APQ8096SG: + drv->versions = 1 << ((unsigned int)(*speedbin) + 4); + break; + default: diff --git a/target/linux/ipq807x/patches-5.15/0128-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch b/target/linux/ipq807x/patches-5.15/0128-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch new file mode 100644 index 0000000000..0a784f7393 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0128-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch @@ -0,0 +1,100 @@ +From 813f2b5ad002e691b92154037f154b4444eedd54 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sat, 31 Dec 2022 13:03:41 +0100 +Subject: [PATCH] cpufreq: qcom-nvmem: add support for IPQ8074 + +IPQ8074 comes in 2 families: +* IPQ8070A/IPQ8071A (Acorn) up to 1.4GHz +* IPQ8072A/IPQ8074A/IPQ8076A/IPQ8078A (Hawkeye) up to 2.2GHz + +So, in order to be able to share one OPP table lets add support for IPQ8074 +family based of SMEM SoC ID-s as speedbin fuse is always 0 on IPQ8074. + +IPQ8074 compatible is blacklisted from DT platdev as the cpufreq device +will get created by NVMEM CPUFreq driver. + +Signed-off-by: Robert Marko +--- + drivers/cpufreq/cpufreq-dt-platdev.c | 1 + + drivers/cpufreq/qcom-cpufreq-nvmem.c | 39 ++++++++++++++++++++++++++++ + 2 files changed, 40 insertions(+) + +--- a/drivers/cpufreq/cpufreq-dt-platdev.c ++++ b/drivers/cpufreq/cpufreq-dt-platdev.c +@@ -157,6 +157,7 @@ static const struct of_device_id blockli + { .compatible = "ti,omap3", }, + + { .compatible = "qcom,ipq8064", }, ++ { .compatible = "qcom,ipq8074", }, + { .compatible = "qcom,apq8064", }, + { .compatible = "qcom,msm8974", }, + { .compatible = "qcom,msm8960", }, +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c +@@ -32,6 +32,9 @@ + + #include + ++#define IPQ8074_HAWKEYE_VERSION BIT(0) ++#define IPQ8074_ACORN_VERSION BIT(1) ++ + struct qcom_cpufreq_drv; + + struct qcom_cpufreq_match_data { +@@ -218,6 +221,37 @@ len_error: + return ret; + } + ++static int qcom_cpufreq_ipq8074_name_version(struct device *cpu_dev, ++ struct nvmem_cell *speedbin_nvmem, ++ char **pvs_name, ++ struct qcom_cpufreq_drv *drv) ++{ ++ int msm_id; ++ *pvs_name = NULL; ++ ++ msm_id = qcom_cpufreq_get_msm_id(); ++ if (msm_id < 0) ++ return msm_id; ++ ++ switch (msm_id) { ++ case QCOM_ID_IPQ8070A: ++ case QCOM_ID_IPQ8071A: ++ drv->versions = IPQ8074_ACORN_VERSION; ++ break; ++ case QCOM_ID_IPQ8072A: ++ case QCOM_ID_IPQ8074A: ++ case QCOM_ID_IPQ8076A: ++ case QCOM_ID_IPQ8078A: ++ drv->versions = IPQ8074_HAWKEYE_VERSION; ++ break; ++ default: ++ BUG(); ++ break; ++ } ++ ++ return 0; ++} ++ + static const struct qcom_cpufreq_match_data match_data_kryo = { + .get_version = qcom_cpufreq_kryo_name_version, + }; +@@ -232,6 +266,10 @@ static const struct qcom_cpufreq_match_d + .genpd_names = qcs404_genpd_names, + }; + ++static const struct qcom_cpufreq_match_data match_data_ipq8074 = { ++ .get_version = qcom_cpufreq_ipq8074_name_version, ++}; ++ + static int qcom_cpufreq_probe(struct platform_device *pdev) + { + struct qcom_cpufreq_drv *drv; +@@ -431,6 +469,7 @@ static const struct of_device_id qcom_cp + { .compatible = "qcom,msm8996", .data = &match_data_kryo }, + { .compatible = "qcom,qcs404", .data = &match_data_qcs404 }, + { .compatible = "qcom,ipq8064", .data = &match_data_krait }, ++ { .compatible = "qcom,ipq8074", .data = &match_data_ipq8074 }, + { .compatible = "qcom,apq8064", .data = &match_data_krait }, + { .compatible = "qcom,msm8974", .data = &match_data_krait }, + { .compatible = "qcom,msm8960", .data = &match_data_krait }, diff --git a/target/linux/ipq807x/patches-5.15/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch b/target/linux/ipq807x/patches-5.15/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch new file mode 100644 index 0000000000..3a6f4e9c87 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch @@ -0,0 +1,128 @@ +From 04d2fc6a551bbd972a6428059b45ce79cb9de9d7 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Fri, 6 May 2022 22:38:24 +0200 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add QFPROM fuses + +Add the QFPROM node and CPR fuses. + +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 107 ++++++++++++++++++++++++++ + 1 file changed, 107 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -340,6 +340,113 @@ + status = "disabled"; + }; + ++ qfprom: efuse@a4000 { ++ compatible = "qcom,ipq8074-qfprom", "qcom,qfprom"; ++ reg = <0x000a4000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ cpr_efuse_speedbin: speedbin@125 { ++ reg = <0x125 0x1>; ++ bits = <0 3>; ++ }; ++ ++ cpr_efuse_boost_cfg: boost_cfg@125 { ++ reg = <0x125 0x1>; ++ bits = <3 3>; ++ }; ++ ++ cpr_efuse_misc_volt_adj: misc_volt_adj@125 { ++ reg = <0x125 0x1>; ++ bits = <3 3>; ++ }; ++ ++ cpr_efuse_boost_volt: boost_volt@126 { ++ reg = <0x126 0x1>; ++ bits = <6 1>; ++ }; ++ ++ cpr_efuse_revision: revision@23e { ++ reg = <0x23e 0x1>; ++ bits = <5 3>; ++ }; ++ ++ cpr_efuse_ro_sel0: rosel0@249 { ++ reg = <0x249 0x1>; ++ bits = <0 4>; ++ }; ++ ++ cpr_efuse_ro_sel1: rosel1@248 { ++ reg = <0x248 0x1>; ++ bits = <4 4>; ++ }; ++ ++ cpr_efuse_ro_sel2: rosel2@248 { ++ reg = <0x248 0x2>; ++ bits = <0 4>; ++ }; ++ ++ cpr_efuse_ro_sel3: rosel3@249 { ++ reg = <0x249 0x1>; ++ bits = <4 4>; ++ }; ++ ++ cpr_efuse_init_voltage0: ivoltage0@23a { ++ reg = <0x23a 0x1>; ++ bits = <2 6>; ++ }; ++ ++ cpr_efuse_init_voltage1: ivoltage1@239 { ++ reg = <0x239 0x2>; ++ bits = <4 6>; ++ }; ++ ++ cpr_efuse_init_voltage2: ivoltage2@238 { ++ reg = <0x238 0x2>; ++ bits = <6 6>; ++ }; ++ ++ cpr_efuse_init_voltage3: ivoltage3@238 { ++ reg = <0x238 0x1>; ++ bits = <0 6>; ++ }; ++ ++ cpr_efuse_quot0: quot0@244 { ++ reg = <0x244 0x2>; ++ bits = <0 12>; ++ }; ++ ++ cpr_efuse_quot1: quot1@242 { ++ reg = <0x242 0x2>; ++ bits = <4 12>; ++ }; ++ ++ cpr_efuse_quot2: quot2@241 { ++ reg = <0x241 0x2>; ++ bits = <0 12>; ++ }; ++ ++ cpr_efuse_quot3: quot3@245 { ++ reg = <0x245 0x2>; ++ bits = <4 12>; ++ }; ++ ++ cpr_efuse_quot0_offset: quot0_offset@23d { ++ reg = <0x23d 0x2>; ++ bits = <6 7>; ++ }; ++ ++ cpr_efuse_quot1_offset: quot1_offset@23c { ++ reg = <0x23c 0x2>; ++ bits = <7 7>; ++ }; ++ ++ cpr_efuse_quot2_offset: quot2_offset@23c { ++ reg = <0x23c 0x1>; ++ bits = <0 7>; ++ }; ++ }; ++ + prng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; diff --git a/target/linux/ipq807x/patches-5.15/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch b/target/linux/ipq807x/patches-5.15/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch new file mode 100644 index 0000000000..9c1e7b9d29 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch @@ -0,0 +1,102 @@ +From a20c4e8738a00087aa5d53fe5148ed484e23d229 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sat, 31 Dec 2022 13:56:26 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: add CPU OPP table + +Now that there is NVMEM CPUFreq support for IPQ8074, we can add the OPP +table for SoC. + +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 52 +++++++++++++++++++++++++++ + 1 file changed, 52 insertions(+) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -42,6 +42,7 @@ + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + #cooling-cells = <2>; ++ operating-points-v2 = <&cpu_opp_table>; + }; + + CPU1: cpu@1 { +@@ -53,6 +54,7 @@ + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + #cooling-cells = <2>; ++ operating-points-v2 = <&cpu_opp_table>; + }; + + CPU2: cpu@2 { +@@ -64,6 +66,7 @@ + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + #cooling-cells = <2>; ++ operating-points-v2 = <&cpu_opp_table>; + }; + + CPU3: cpu@3 { +@@ -75,6 +78,7 @@ + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + clock-names = "cpu"; + #cooling-cells = <2>; ++ operating-points-v2 = <&cpu_opp_table>; + }; + + L2_0: l2-cache { +@@ -83,6 +87,54 @@ + }; + }; + ++ cpu_opp_table: opp-table { ++ compatible = "operating-points-v2-kryo-cpu"; ++ nvmem-cells = <&cpr_efuse_speedbin>; ++ opp-shared; ++ ++ opp-1017600000 { ++ opp-hz = /bits/ 64 <1017600000>; ++ opp-microvolt = <1>; ++ opp-supported-hw = <0xf>; ++ clock-latency-ns = <200000>; ++ }; ++ ++ opp-1382400000 { ++ opp-hz = /bits/ 64 <1382400000>; ++ opp-microvolt = <2>; ++ opp-supported-hw = <0xf>; ++ clock-latency-ns = <200000>; ++ }; ++ ++ opp-1651200000 { ++ opp-hz = /bits/ 64 <1651200000>; ++ opp-microvolt = <3>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <200000>; ++ }; ++ ++ opp-1843200000 { ++ opp-hz = /bits/ 64 <1843200000>; ++ opp-microvolt = <4>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <200000>; ++ }; ++ ++ opp-1920000000 { ++ opp-hz = /bits/ 64 <1920000000>; ++ opp-microvolt = <5>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <200000>; ++ }; ++ ++ opp-2208000000 { ++ opp-hz = /bits/ 64 <2208000000>; ++ opp-microvolt = <6>; ++ opp-supported-hw = <0x1>; ++ clock-latency-ns = <200000>; ++ }; ++ }; ++ + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; diff --git a/target/linux/ipq807x/patches-5.15/0131-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch b/target/linux/ipq807x/patches-5.15/0131-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch new file mode 100644 index 0000000000..eb772be4ce --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0131-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch @@ -0,0 +1,38 @@ +From 614d31c231c7707322b643f409eeb7e28adc7f8c Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sun, 8 Jan 2023 13:36:28 +0100 +Subject: [PATCH] clk: qcom: ipq8074: populate fw_name for usb3phy-s + +Having only .name populated in parent_data for clocks which are only +globally searchable currently will not work as the clk core won't copy +that name if there is no .fw_name present as well. + +So, populate .fw_name for usb3phy clocks in parent_data as they were +missed by me in ("clk: qcom: ipq8074: populate fw_name for all parents"). + +Fixes: ae55ad32e273 ("clk: qcom: ipq8074: convert to parent data") +Signed-off-by: Robert Marko +--- + drivers/clk/qcom/gcc-ipq8074.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq8074.c ++++ b/drivers/clk/qcom/gcc-ipq8074.c +@@ -934,7 +934,7 @@ static struct clk_rcg2 usb0_mock_utmi_cl + }; + + static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = { +- { .name = "usb3phy_0_cc_pipe_clk" }, ++ { .fw_name = "usb3phy_0_cc_pipe_clk", .name = "usb3phy_0_cc_pipe_clk" }, + { .fw_name = "xo", .name = "xo" }, + }; + +@@ -1002,7 +1002,7 @@ static struct clk_rcg2 usb1_mock_utmi_cl + }; + + static const struct clk_parent_data gcc_usb3phy_1_cc_pipe_clk_xo[] = { +- { .name = "usb3phy_1_cc_pipe_clk" }, ++ { .fw_name = "usb3phy_1_cc_pipe_clk", .name = "usb3phy_1_cc_pipe_clk" }, + { .fw_name = "xo", .name = "xo" }, + }; + diff --git a/target/linux/ipq807x/patches-5.15/0132-arm64-dts-qcom-ipq8074-correct-USB3-QMP-PHY-s-clock-.patch b/target/linux/ipq807x/patches-5.15/0132-arm64-dts-qcom-ipq8074-correct-USB3-QMP-PHY-s-clock-.patch new file mode 100644 index 0000000000..58dfba6e9c --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0132-arm64-dts-qcom-ipq8074-correct-USB3-QMP-PHY-s-clock-.patch @@ -0,0 +1,52 @@ +From 1bfcec16a591622b4993c043e6cc4d07f3690767 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Sun, 8 Jan 2023 13:39:55 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock + output names + +It seems that clock-output-names for the USB3 QMP PHY-s where set without +actually checking what is the GCC clock driver expecting, so clock core +could never actually find the parents for usb0_pipe_clk_src and +usb1_pipe_clk_src clocks in the GCC driver. + +So, correct the names to be what the driver expects so that parenting +works. + +Before: +gcc_usb0_pipe_clk_src 0 0 0 125000000 0 0 50000 Y +gcc_usb1_pipe_clk_src 0 0 0 125000000 0 0 50000 Y + +After: + usb3phy_0_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y + usb0_pipe_clk_src 1 1 0 125000000 0 0 50000 Y + gcc_usb0_pipe_clk 1 1 0 125000000 0 0 50000 Y + usb3phy_1_cc_pipe_clk 1 1 0 125000000 0 0 50000 Y + usb1_pipe_clk_src 1 1 0 125000000 0 0 50000 Y + gcc_usb1_pipe_clk 1 1 0 125000000 0 0 50000 Y + +Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support") +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -263,7 +263,7 @@ + #clock-cells = <0>; + clocks = <&gcc GCC_USB1_PIPE_CLK>; + clock-names = "pipe0"; +- clock-output-names = "gcc_usb1_pipe_clk_src"; ++ clock-output-names = "usb3phy_1_cc_pipe_clk"; + }; + }; + +@@ -306,7 +306,7 @@ + #clock-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; +- clock-output-names = "gcc_usb0_pipe_clk_src"; ++ clock-output-names = "usb3phy_0_cc_pipe_clk"; + }; + }; + diff --git a/target/linux/ipq807x/patches-5.15/0900-power-Add-Qualcomm-APM.patch b/target/linux/ipq807x/patches-5.15/0900-power-Add-Qualcomm-APM.patch new file mode 100644 index 0000000000..2e5c72b7d1 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0900-power-Add-Qualcomm-APM.patch @@ -0,0 +1,1047 @@ +From 6c98adf98236b8644b8f5e1aa7af9f1a88ea2766 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Mon, 11 Apr 2022 14:38:08 +0200 +Subject: [PATCH] power: Add Qualcomm APM + +Add Qualcomm APM driver, which allows scaling cache and memory fabrics. + +Signed-off-by: Robert Marko +--- + drivers/power/Kconfig | 1 + + drivers/power/Makefile | 1 + + drivers/power/qcom/Kconfig | 7 + + drivers/power/qcom/Makefile | 1 + + drivers/power/qcom/apm.c | 944 +++++++++++++++++++++++++++++++++ + include/linux/power/qcom/apm.h | 48 ++ + 6 files changed, 1002 insertions(+) + create mode 100644 drivers/power/qcom/Kconfig + create mode 100644 drivers/power/qcom/Makefile + create mode 100644 drivers/power/qcom/apm.c + create mode 100644 include/linux/power/qcom/apm.h + +--- a/drivers/power/Kconfig ++++ b/drivers/power/Kconfig +@@ -1,3 +1,4 @@ + # SPDX-License-Identifier: GPL-2.0-only + source "drivers/power/reset/Kconfig" + source "drivers/power/supply/Kconfig" ++source "drivers/power/qcom/Kconfig" +--- a/drivers/power/Makefile ++++ b/drivers/power/Makefile +@@ -1,3 +1,4 @@ + # SPDX-License-Identifier: GPL-2.0-only + obj-$(CONFIG_POWER_RESET) += reset/ + obj-$(CONFIG_POWER_SUPPLY) += supply/ ++obj-$(CONFIG_QCOM_APM) += qcom/ +--- /dev/null ++++ b/drivers/power/qcom/Kconfig +@@ -0,0 +1,7 @@ ++config QCOM_APM ++ bool "Qualcomm Technologies Inc platform specific APM driver" ++ help ++ Platform specific driver to manage the power source of ++ memory arrays. Interfaces with regulator drivers to ensure ++ SRAM Vmin requirements are met across different performance ++ levels. +--- /dev/null ++++ b/drivers/power/qcom/Makefile +@@ -0,0 +1 @@ ++obj-$(CONFIG_QCOM_APM) += apm.o +--- /dev/null ++++ b/drivers/power/qcom/apm.c +@@ -0,0 +1,944 @@ ++/* ++ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#define pr_fmt(fmt) "%s: " fmt, __func__ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* ++ * VDD_APCC ++ * ============================================================= ++ * | VDD_MX | | ++ * | ==========================|============= | ++ * ___|___ ___|___ ___|___ ___|___ ___|___ ___|___ ++ * | | | | | | | | | | | | ++ * | APCC | | MX HS | | MX HS | | APCC | | MX HS | | APCC | ++ * | HS | | | | | | HS | | | | HS | ++ * |_______| |_______| |_______| |_______| |_______| |_______| ++ * |_________| |_________| |__________| ++ * | | | ++ * ______|_____ ______|_____ _______|_____ ++ * | | | | | | ++ * | | | | | | ++ * | CPU MEM | | L2 MEM | | L3 MEM | ++ * | Arrays | | Arrays | | Arrays | ++ * | | | | | | ++ * |____________| |____________| |_____________| ++ * ++ */ ++ ++/* Register value definitions */ ++#define APCS_GFMUXA_SEL_VAL 0x13 ++#define APCS_GFMUXA_DESEL_VAL 0x03 ++#define MSM_APM_MX_MODE_VAL 0x00 ++#define MSM_APM_APCC_MODE_VAL 0x10 ++#define MSM_APM_MX_DONE_VAL 0x00 ++#define MSM_APM_APCC_DONE_VAL 0x03 ++#define MSM_APM_OVERRIDE_SEL_VAL 0xb0 ++#define MSM_APM_SEC_CLK_SEL_VAL 0x30 ++#define SPM_EVENT_SET_VAL 0x01 ++#define SPM_EVENT_CLEAR_VAL 0x00 ++ ++/* Register bit mask definitions */ ++#define MSM_APM_CTL_STS_MASK 0x0f ++ ++/* Register offset definitions */ ++#define APCC_APM_MODE 0x00000098 ++#define APCC_APM_CTL_STS 0x000000a8 ++#define APCS_SPARE 0x00000068 ++#define APCS_VERSION 0x00000fd0 ++ ++#define HMSS_VERSION_1P2 0x10020000 ++ ++#define MSM_APM_SWITCH_TIMEOUT_US 10 ++#define SPM_WAKEUP_DELAY_US 2 ++#define SPM_EVENT_NUM 6 ++ ++#define MSM_APM_DRIVER_NAME "qcom,msm-apm" ++ ++enum { ++ MSM8996_ID, ++ MSM8953_ID, ++ IPQ807x_ID, ++}; ++ ++struct msm_apm_ctrl_dev { ++ struct list_head list; ++ struct device *dev; ++ enum msm_apm_supply supply; ++ spinlock_t lock; ++ void __iomem *reg_base; ++ void __iomem *apcs_csr_base; ++ void __iomem **apcs_spm_events_addr; ++ void __iomem *apc0_pll_ctl_addr; ++ void __iomem *apc1_pll_ctl_addr; ++ u32 version; ++ struct dentry *debugfs; ++ u32 msm_id; ++}; ++ ++#if defined(CONFIG_DEBUG_FS) ++static struct dentry *apm_debugfs_base; ++#endif ++ ++static DEFINE_MUTEX(apm_ctrl_list_mutex); ++static LIST_HEAD(apm_ctrl_list); ++ ++/* ++ * Get the resources associated with the APM controller from device tree ++ * and remap all I/O addresses that are relevant to this HW revision. ++ */ ++static int msm_apm_ctrl_devm_ioremap(struct platform_device *pdev, ++ struct msm_apm_ctrl_dev *ctrl) ++{ ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ static const char *res_name[SPM_EVENT_NUM] = { ++ "apc0-l2-spm", ++ "apc1-l2-spm", ++ "apc0-cpu0-spm", ++ "apc0-cpu1-spm", ++ "apc1-cpu0-spm", ++ "apc1-cpu1-spm" ++ }; ++ int i, ret = 0; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pm-apcc-glb"); ++ if (!res) { ++ dev_err(dev, "Missing PM APCC Global register physical address"); ++ return -EINVAL; ++ } ++ ctrl->reg_base = devm_ioremap(dev, res->start, resource_size(res)); ++ if (!ctrl->reg_base) { ++ dev_err(dev, "Failed to map PM APCC Global registers\n"); ++ return -ENOMEM; ++ } ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apcs-csr"); ++ if (!res) { ++ dev_err(dev, "Missing APCS CSR physical base address"); ++ return -EINVAL; ++ } ++ ctrl->apcs_csr_base = devm_ioremap(dev, res->start, resource_size(res)); ++ if (!ctrl->apcs_csr_base) { ++ dev_err(dev, "Failed to map APCS CSR registers\n"); ++ return -ENOMEM; ++ } ++ ++ ctrl->version = readl_relaxed(ctrl->apcs_csr_base + APCS_VERSION); ++ ++ if (ctrl->version >= HMSS_VERSION_1P2) ++ return ret; ++ ++ ctrl->apcs_spm_events_addr = devm_kzalloc(&pdev->dev, ++ SPM_EVENT_NUM ++ * sizeof(void __iomem *), ++ GFP_KERNEL); ++ if (!ctrl->apcs_spm_events_addr) { ++ dev_err(dev, "Failed to allocate memory for APCS SPM event registers\n"); ++ return -ENOMEM; ++ } ++ ++ for (i = 0; i < SPM_EVENT_NUM; i++) { ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ res_name[i]); ++ if (!res) { ++ dev_err(dev, "Missing address for %s\n", res_name[i]); ++ ret = -EINVAL; ++ goto free_events; ++ } ++ ++ ctrl->apcs_spm_events_addr[i] = devm_ioremap(dev, res->start, ++ resource_size(res)); ++ if (!ctrl->apcs_spm_events_addr[i]) { ++ dev_err(dev, "Failed to map %s\n", res_name[i]); ++ ret = -ENOMEM; ++ goto free_events; ++ } ++ ++ dev_dbg(dev, "%s event phys: %pa virt:0x%p\n", res_name[i], ++ &res->start, ctrl->apcs_spm_events_addr[i]); ++ } ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "apc0-pll-ctl"); ++ if (!res) { ++ dev_err(dev, "Missing APC0 PLL CTL physical address\n"); ++ ret = -EINVAL; ++ goto free_events; ++ } ++ ++ ctrl->apc0_pll_ctl_addr = devm_ioremap(dev, ++ res->start, ++ resource_size(res)); ++ if (!ctrl->apc0_pll_ctl_addr) { ++ dev_err(dev, "Failed to map APC0 PLL CTL register\n"); ++ ret = -ENOMEM; ++ goto free_events; ++ } ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "apc1-pll-ctl"); ++ if (!res) { ++ dev_err(dev, "Missing APC1 PLL CTL physical address\n"); ++ ret = -EINVAL; ++ goto free_events; ++ } ++ ++ ctrl->apc1_pll_ctl_addr = devm_ioremap(dev, ++ res->start, ++ resource_size(res)); ++ if (!ctrl->apc1_pll_ctl_addr) { ++ dev_err(dev, "Failed to map APC1 PLL CTL register\n"); ++ ret = -ENOMEM; ++ goto free_events; ++ } ++ ++ return ret; ++ ++free_events: ++ devm_kfree(dev, ctrl->apcs_spm_events_addr); ++ return ret; ++} ++ ++/* 8953 register offset definition */ ++#define MSM8953_APM_DLY_CNTR 0x2ac ++ ++/* Register field shift definitions */ ++#define APM_CTL_SEL_SWITCH_DLY_SHIFT 0 ++#define APM_CTL_RESUME_CLK_DLY_SHIFT 8 ++#define APM_CTL_HALT_CLK_DLY_SHIFT 16 ++#define APM_CTL_POST_HALT_DLY_SHIFT 24 ++ ++/* Register field mask definitions */ ++#define APM_CTL_SEL_SWITCH_DLY_MASK GENMASK(7, 0) ++#define APM_CTL_RESUME_CLK_DLY_MASK GENMASK(15, 8) ++#define APM_CTL_HALT_CLK_DLY_MASK GENMASK(23, 16) ++#define APM_CTL_POST_HALT_DLY_MASK GENMASK(31, 24) ++ ++/* ++ * Get the resources associated with the msm8953 APM controller from ++ * device tree, remap all I/O addresses, and program the initial ++ * register configuration required for the 8953 APM controller device. ++ */ ++static int msm8953_apm_ctrl_init(struct platform_device *pdev, ++ struct msm_apm_ctrl_dev *ctrl) ++{ ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ u32 delay_counter, val = 0, regval = 0; ++ int rc = 0; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pm-apcc-glb"); ++ if (!res) { ++ dev_err(dev, "Missing PM APCC Global register physical address\n"); ++ return -ENODEV; ++ } ++ ctrl->reg_base = devm_ioremap(dev, res->start, resource_size(res)); ++ if (!ctrl->reg_base) { ++ dev_err(dev, "Failed to map PM APCC Global registers\n"); ++ return -ENOMEM; ++ } ++ ++ /* ++ * Initial APM register configuration required before starting ++ * APM HW controller. ++ */ ++ regval = readl_relaxed(ctrl->reg_base + MSM8953_APM_DLY_CNTR); ++ val = regval; ++ ++ if (of_find_property(dev->of_node, "qcom,apm-post-halt-delay", NULL)) { ++ rc = of_property_read_u32(dev->of_node, ++ "qcom,apm-post-halt-delay", &delay_counter); ++ if (rc < 0) { ++ dev_err(dev, "apm-post-halt-delay read failed, rc = %d", ++ rc); ++ return rc; ++ } ++ ++ val &= ~APM_CTL_POST_HALT_DLY_MASK; ++ val |= (delay_counter << APM_CTL_POST_HALT_DLY_SHIFT) ++ & APM_CTL_POST_HALT_DLY_MASK; ++ } ++ ++ if (of_find_property(dev->of_node, "qcom,apm-halt-clk-delay", NULL)) { ++ rc = of_property_read_u32(dev->of_node, ++ "qcom,apm-halt-clk-delay", &delay_counter); ++ if (rc < 0) { ++ dev_err(dev, "apm-halt-clk-delay read failed, rc = %d", ++ rc); ++ return rc; ++ } ++ ++ val &= ~APM_CTL_HALT_CLK_DLY_MASK; ++ val |= (delay_counter << APM_CTL_HALT_CLK_DLY_SHIFT) ++ & APM_CTL_HALT_CLK_DLY_MASK; ++ } ++ ++ if (of_find_property(dev->of_node, "qcom,apm-resume-clk-delay", NULL)) { ++ rc = of_property_read_u32(dev->of_node, ++ "qcom,apm-resume-clk-delay", &delay_counter); ++ if (rc < 0) { ++ dev_err(dev, "apm-resume-clk-delay read failed, rc = %d", ++ rc); ++ return rc; ++ } ++ ++ val &= ~APM_CTL_RESUME_CLK_DLY_MASK; ++ val |= (delay_counter << APM_CTL_RESUME_CLK_DLY_SHIFT) ++ & APM_CTL_RESUME_CLK_DLY_MASK; ++ } ++ ++ if (of_find_property(dev->of_node, "qcom,apm-sel-switch-delay", NULL)) { ++ rc = of_property_read_u32(dev->of_node, ++ "qcom,apm-sel-switch-delay", &delay_counter); ++ if (rc < 0) { ++ dev_err(dev, "apm-sel-switch-delay read failed, rc = %d", ++ rc); ++ return rc; ++ } ++ ++ val &= ~APM_CTL_SEL_SWITCH_DLY_MASK; ++ val |= (delay_counter << APM_CTL_SEL_SWITCH_DLY_SHIFT) ++ & APM_CTL_SEL_SWITCH_DLY_MASK; ++ } ++ ++ if (val != regval) { ++ writel_relaxed(val, ctrl->reg_base + MSM8953_APM_DLY_CNTR); ++ /* make sure write completes before return */ ++ mb(); ++ } ++ ++ return rc; ++} ++ ++static int msm8996_apm_switch_to_mx(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ int i, timeout = MSM_APM_SWITCH_TIMEOUT_US; ++ u32 regval; ++ int ret = 0; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ctrl_dev->lock, flags); ++ ++ /* Perform revision-specific programming steps */ ++ if (ctrl_dev->version < HMSS_VERSION_1P2) { ++ /* Clear SPM events */ ++ for (i = 0; i < SPM_EVENT_NUM; i++) ++ writel_relaxed(SPM_EVENT_CLEAR_VAL, ++ ctrl_dev->apcs_spm_events_addr[i]); ++ ++ udelay(SPM_WAKEUP_DELAY_US); ++ ++ /* Switch APC/CBF to GPLL0 clock */ ++ writel_relaxed(APCS_GFMUXA_SEL_VAL, ++ ctrl_dev->apcs_csr_base + APCS_SPARE); ++ ndelay(200); ++ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL, ++ ctrl_dev->apc0_pll_ctl_addr); ++ ndelay(200); ++ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL, ++ ctrl_dev->apc1_pll_ctl_addr); ++ ++ /* Ensure writes complete before proceeding */ ++ mb(); ++ } ++ ++ /* Switch arrays to MX supply and wait for its completion */ ++ writel_relaxed(MSM_APM_MX_MODE_VAL, ctrl_dev->reg_base + ++ APCC_APM_MODE); ++ ++ /* Ensure write above completes before delaying */ ++ mb(); ++ ++ while (timeout > 0) { ++ regval = readl_relaxed(ctrl_dev->reg_base + APCC_APM_CTL_STS); ++ if ((regval & MSM_APM_CTL_STS_MASK) == ++ MSM_APM_MX_DONE_VAL) ++ break; ++ ++ udelay(1); ++ timeout--; ++ } ++ ++ if (timeout == 0) { ++ ret = -ETIMEDOUT; ++ dev_err(ctrl_dev->dev, "APCC to MX APM switch timed out. APCC_APM_CTL_STS=0x%x\n", ++ regval); ++ } ++ ++ /* Perform revision-specific programming steps */ ++ if (ctrl_dev->version < HMSS_VERSION_1P2) { ++ /* Switch APC/CBF clocks to original source */ ++ writel_relaxed(APCS_GFMUXA_DESEL_VAL, ++ ctrl_dev->apcs_csr_base + APCS_SPARE); ++ ndelay(200); ++ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL, ++ ctrl_dev->apc0_pll_ctl_addr); ++ ndelay(200); ++ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL, ++ ctrl_dev->apc1_pll_ctl_addr); ++ ++ /* Complete clock source switch before SPM event sequence */ ++ mb(); ++ ++ /* Set SPM events */ ++ for (i = 0; i < SPM_EVENT_NUM; i++) ++ writel_relaxed(SPM_EVENT_SET_VAL, ++ ctrl_dev->apcs_spm_events_addr[i]); ++ } ++ ++ if (!ret) { ++ ctrl_dev->supply = MSM_APM_SUPPLY_MX; ++ dev_dbg(ctrl_dev->dev, "APM supply switched to MX\n"); ++ } ++ ++ spin_unlock_irqrestore(&ctrl_dev->lock, flags); ++ ++ return ret; ++} ++ ++static int msm8996_apm_switch_to_apcc(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ int i, timeout = MSM_APM_SWITCH_TIMEOUT_US; ++ u32 regval; ++ int ret = 0; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ctrl_dev->lock, flags); ++ ++ /* Perform revision-specific programming steps */ ++ if (ctrl_dev->version < HMSS_VERSION_1P2) { ++ /* Clear SPM events */ ++ for (i = 0; i < SPM_EVENT_NUM; i++) ++ writel_relaxed(SPM_EVENT_CLEAR_VAL, ++ ctrl_dev->apcs_spm_events_addr[i]); ++ ++ udelay(SPM_WAKEUP_DELAY_US); ++ ++ /* Switch APC/CBF to GPLL0 clock */ ++ writel_relaxed(APCS_GFMUXA_SEL_VAL, ++ ctrl_dev->apcs_csr_base + APCS_SPARE); ++ ndelay(200); ++ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL, ++ ctrl_dev->apc0_pll_ctl_addr); ++ ndelay(200); ++ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL, ++ ctrl_dev->apc1_pll_ctl_addr); ++ ++ /* Ensure previous writes complete before proceeding */ ++ mb(); ++ } ++ ++ /* Switch arrays to APCC supply and wait for its completion */ ++ writel_relaxed(MSM_APM_APCC_MODE_VAL, ctrl_dev->reg_base + ++ APCC_APM_MODE); ++ ++ /* Ensure write above completes before delaying */ ++ mb(); ++ ++ while (timeout > 0) { ++ regval = readl_relaxed(ctrl_dev->reg_base + APCC_APM_CTL_STS); ++ if ((regval & MSM_APM_CTL_STS_MASK) == ++ MSM_APM_APCC_DONE_VAL) ++ break; ++ ++ udelay(1); ++ timeout--; ++ } ++ ++ if (timeout == 0) { ++ ret = -ETIMEDOUT; ++ dev_err(ctrl_dev->dev, "MX to APCC APM switch timed out. APCC_APM_CTL_STS=0x%x\n", ++ regval); ++ } ++ ++ /* Perform revision-specific programming steps */ ++ if (ctrl_dev->version < HMSS_VERSION_1P2) { ++ /* Set SPM events */ ++ for (i = 0; i < SPM_EVENT_NUM; i++) ++ writel_relaxed(SPM_EVENT_SET_VAL, ++ ctrl_dev->apcs_spm_events_addr[i]); ++ ++ /* Complete SPM event sequence before clock source switch */ ++ mb(); ++ ++ /* Switch APC/CBF clocks to original source */ ++ writel_relaxed(APCS_GFMUXA_DESEL_VAL, ++ ctrl_dev->apcs_csr_base + APCS_SPARE); ++ ndelay(200); ++ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL, ++ ctrl_dev->apc0_pll_ctl_addr); ++ ndelay(200); ++ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL, ++ ctrl_dev->apc1_pll_ctl_addr); ++ } ++ ++ if (!ret) { ++ ctrl_dev->supply = MSM_APM_SUPPLY_APCC; ++ dev_dbg(ctrl_dev->dev, "APM supply switched to APCC\n"); ++ } ++ ++ spin_unlock_irqrestore(&ctrl_dev->lock, flags); ++ ++ return ret; ++} ++ ++/* 8953 register value definitions */ ++#define MSM8953_APM_MX_MODE_VAL 0x00 ++#define MSM8953_APM_APCC_MODE_VAL 0x02 ++#define MSM8953_APM_MX_DONE_VAL 0x00 ++#define MSM8953_APM_APCC_DONE_VAL 0x03 ++ ++/* 8953 register offset definitions */ ++#define MSM8953_APCC_APM_MODE 0x000002a8 ++#define MSM8953_APCC_APM_CTL_STS 0x000002b0 ++ ++/* 8953 constants */ ++#define MSM8953_APM_SWITCH_TIMEOUT_US 500 ++ ++/* Register bit mask definitions */ ++#define MSM8953_APM_CTL_STS_MASK 0x1f ++ ++static int msm8953_apm_switch_to_mx(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ int timeout = MSM8953_APM_SWITCH_TIMEOUT_US; ++ u32 regval; ++ int ret = 0; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ctrl_dev->lock, flags); ++ ++ /* Switch arrays to MX supply and wait for its completion */ ++ writel_relaxed(MSM8953_APM_MX_MODE_VAL, ctrl_dev->reg_base + ++ MSM8953_APCC_APM_MODE); ++ ++ /* Ensure write above completes before delaying */ ++ mb(); ++ ++ while (timeout > 0) { ++ regval = readl_relaxed(ctrl_dev->reg_base + ++ MSM8953_APCC_APM_CTL_STS); ++ if ((regval & MSM8953_APM_CTL_STS_MASK) == ++ MSM8953_APM_MX_DONE_VAL) ++ break; ++ ++ udelay(1); ++ timeout--; ++ } ++ ++ if (timeout == 0) { ++ ret = -ETIMEDOUT; ++ dev_err(ctrl_dev->dev, "APCC to MX APM switch timed out. APCC_APM_CTL_STS=0x%x\n", ++ regval); ++ } else { ++ ctrl_dev->supply = MSM_APM_SUPPLY_MX; ++ dev_dbg(ctrl_dev->dev, "APM supply switched to MX\n"); ++ } ++ ++ spin_unlock_irqrestore(&ctrl_dev->lock, flags); ++ ++ return ret; ++} ++ ++static int msm8953_apm_switch_to_apcc(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ int timeout = MSM8953_APM_SWITCH_TIMEOUT_US; ++ u32 regval; ++ int ret = 0; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ctrl_dev->lock, flags); ++ ++ /* Switch arrays to APCC supply and wait for its completion */ ++ writel_relaxed(MSM8953_APM_APCC_MODE_VAL, ctrl_dev->reg_base + ++ MSM8953_APCC_APM_MODE); ++ ++ /* Ensure write above completes before delaying */ ++ mb(); ++ ++ while (timeout > 0) { ++ regval = readl_relaxed(ctrl_dev->reg_base + ++ MSM8953_APCC_APM_CTL_STS); ++ if ((regval & MSM8953_APM_CTL_STS_MASK) == ++ MSM8953_APM_APCC_DONE_VAL) ++ break; ++ ++ udelay(1); ++ timeout--; ++ } ++ ++ if (timeout == 0) { ++ ret = -ETIMEDOUT; ++ dev_err(ctrl_dev->dev, "MX to APCC APM switch timed out. APCC_APM_CTL_STS=0x%x\n", ++ regval); ++ } else { ++ ctrl_dev->supply = MSM_APM_SUPPLY_APCC; ++ dev_dbg(ctrl_dev->dev, "APM supply switched to APCC\n"); ++ } ++ ++ spin_unlock_irqrestore(&ctrl_dev->lock, flags); ++ ++ return ret; ++} ++ ++static int msm_apm_switch_to_mx(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ int ret = 0; ++ ++ switch (ctrl_dev->msm_id) { ++ case MSM8996_ID: ++ ret = msm8996_apm_switch_to_mx(ctrl_dev); ++ break; ++ case MSM8953_ID: ++ case IPQ807x_ID: ++ ret = msm8953_apm_switch_to_mx(ctrl_dev); ++ break; ++ } ++ ++ return ret; ++} ++ ++static int msm_apm_switch_to_apcc(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ int ret = 0; ++ ++ switch (ctrl_dev->msm_id) { ++ case MSM8996_ID: ++ ret = msm8996_apm_switch_to_apcc(ctrl_dev); ++ break; ++ case MSM8953_ID: ++ case IPQ807x_ID: ++ ret = msm8953_apm_switch_to_apcc(ctrl_dev); ++ break; ++ } ++ ++ return ret; ++} ++ ++/** ++ * msm_apm_get_supply() - Returns the supply that is currently ++ * powering the memory arrays ++ * @ctrl_dev: Pointer to an MSM APM controller device ++ * ++ * Returns the supply currently selected by the APM. ++ */ ++int msm_apm_get_supply(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ return ctrl_dev->supply; ++} ++EXPORT_SYMBOL(msm_apm_get_supply); ++ ++/** ++ * msm_apm_set_supply() - Perform the necessary steps to switch the voltage ++ * source of the memory arrays to a given supply ++ * @ctrl_dev: Pointer to an MSM APM controller device ++ * @supply: Power rail to use as supply for the memory ++ * arrays ++ * ++ * Returns 0 on success, -ETIMEDOUT on APM switch timeout, or -EPERM if ++ * the supply is not supported. ++ */ ++int msm_apm_set_supply(struct msm_apm_ctrl_dev *ctrl_dev, ++ enum msm_apm_supply supply) ++{ ++ int ret; ++ ++ switch (supply) { ++ case MSM_APM_SUPPLY_APCC: ++ ret = msm_apm_switch_to_apcc(ctrl_dev); ++ break; ++ case MSM_APM_SUPPLY_MX: ++ ret = msm_apm_switch_to_mx(ctrl_dev); ++ break; ++ default: ++ ret = -EPERM; ++ break; ++ } ++ ++ return ret; ++} ++EXPORT_SYMBOL(msm_apm_set_supply); ++ ++/** ++ * msm_apm_ctrl_dev_get() - get a handle to the MSM APM controller linked to ++ * the device in device tree ++ * @dev: Pointer to the device ++ * ++ * The device must specify "qcom,apm-ctrl" property in its device tree ++ * node which points to an MSM APM controller device node. ++ * ++ * Returns an MSM APM controller handle if successful or ERR_PTR on any error. ++ * If the APM controller device hasn't probed yet, ERR_PTR(-EPROBE_DEFER) is ++ * returned. ++ */ ++struct msm_apm_ctrl_dev *msm_apm_ctrl_dev_get(struct device *dev) ++{ ++ struct msm_apm_ctrl_dev *ctrl_dev = NULL; ++ struct msm_apm_ctrl_dev *dev_found = ERR_PTR(-EPROBE_DEFER); ++ struct device_node *ctrl_node; ++ ++ if (!dev || !dev->of_node) { ++ pr_err("Invalid device node\n"); ++ return ERR_PTR(-EINVAL); ++ } ++ ++ ctrl_node = of_parse_phandle(dev->of_node, "qcom,apm-ctrl", 0); ++ if (!ctrl_node) { ++ pr_err("Could not find qcom,apm-ctrl property in %s\n", ++ dev->of_node->full_name); ++ return ERR_PTR(-ENXIO); ++ } ++ ++ mutex_lock(&apm_ctrl_list_mutex); ++ list_for_each_entry(ctrl_dev, &apm_ctrl_list, list) { ++ if (ctrl_dev->dev && ctrl_dev->dev->of_node == ctrl_node) { ++ dev_found = ctrl_dev; ++ break; ++ } ++ } ++ mutex_unlock(&apm_ctrl_list_mutex); ++ ++ of_node_put(ctrl_node); ++ return dev_found; ++} ++EXPORT_SYMBOL(msm_apm_ctrl_dev_get); ++ ++#if defined(CONFIG_DEBUG_FS) ++ ++static int apm_supply_dbg_open(struct inode *inode, struct file *filep) ++{ ++ filep->private_data = inode->i_private; ++ ++ return 0; ++} ++ ++static ssize_t apm_supply_dbg_read(struct file *filep, char __user *ubuf, ++ size_t count, loff_t *ppos) ++{ ++ struct msm_apm_ctrl_dev *ctrl_dev = filep->private_data; ++ char buf[10]; ++ int len; ++ ++ if (!ctrl_dev) { ++ pr_err("invalid apm ctrl handle\n"); ++ return -ENODEV; ++ } ++ ++ if (ctrl_dev->supply == MSM_APM_SUPPLY_APCC) ++ len = snprintf(buf, sizeof(buf), "APCC\n"); ++ else if (ctrl_dev->supply == MSM_APM_SUPPLY_MX) ++ len = snprintf(buf, sizeof(buf), "MX\n"); ++ else ++ len = snprintf(buf, sizeof(buf), "ERR\n"); ++ ++ return simple_read_from_buffer(ubuf, count, ppos, buf, len); ++} ++ ++static const struct file_operations apm_supply_fops = { ++ .open = apm_supply_dbg_open, ++ .read = apm_supply_dbg_read, ++}; ++ ++static void apm_debugfs_base_init(void) ++{ ++ apm_debugfs_base = debugfs_create_dir("msm-apm", NULL); ++ ++ if (IS_ERR_OR_NULL(apm_debugfs_base)) ++ pr_err("msm-apm debugfs base directory creation failed\n"); ++} ++ ++static void apm_debugfs_init(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ struct dentry *temp; ++ ++ if (IS_ERR_OR_NULL(apm_debugfs_base)) { ++ pr_err("Base directory missing, cannot create apm debugfs nodes\n"); ++ return; ++ } ++ ++ ctrl_dev->debugfs = debugfs_create_dir(dev_name(ctrl_dev->dev), ++ apm_debugfs_base); ++ if (IS_ERR_OR_NULL(ctrl_dev->debugfs)) { ++ pr_err("%s debugfs directory creation failed\n", ++ dev_name(ctrl_dev->dev)); ++ return; ++ } ++ ++ temp = debugfs_create_file("supply", S_IRUGO, ctrl_dev->debugfs, ++ ctrl_dev, &apm_supply_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ pr_err("supply mode creation failed\n"); ++ return; ++ } ++} ++ ++static void apm_debugfs_deinit(struct msm_apm_ctrl_dev *ctrl_dev) ++{ ++ if (!IS_ERR_OR_NULL(ctrl_dev->debugfs)) ++ debugfs_remove_recursive(ctrl_dev->debugfs); ++} ++ ++static void apm_debugfs_base_remove(void) ++{ ++ debugfs_remove_recursive(apm_debugfs_base); ++} ++#else ++ ++static void apm_debugfs_base_init(void) ++{} ++ ++static void apm_debugfs_init(struct msm_apm_ctrl_dev *ctrl_dev) ++{} ++ ++static void apm_debugfs_deinit(struct msm_apm_ctrl_dev *ctrl_dev) ++{} ++ ++static void apm_debugfs_base_remove(void) ++{} ++ ++#endif ++ ++static struct of_device_id msm_apm_match_table[] = { ++ { ++ .compatible = "qcom,msm-apm", ++ .data = (void *)(uintptr_t)MSM8996_ID, ++ }, ++ { ++ .compatible = "qcom,msm8953-apm", ++ .data = (void *)(uintptr_t)MSM8953_ID, ++ }, ++ { ++ .compatible = "qcom,ipq807x-apm", ++ .data = (void *)(uintptr_t)IPQ807x_ID, ++ }, ++ {} ++}; ++ ++static int msm_apm_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct msm_apm_ctrl_dev *ctrl; ++ const struct of_device_id *match; ++ int ret = 0; ++ ++ dev_dbg(dev, "probing MSM Array Power Mux driver\n"); ++ ++ if (!dev->of_node) { ++ dev_err(dev, "Device tree node is missing\n"); ++ return -ENODEV; ++ } ++ ++ match = of_match_device(msm_apm_match_table, dev); ++ if (!match) ++ return -ENODEV; ++ ++ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); ++ if (!ctrl) { ++ dev_err(dev, "MSM APM controller memory allocation failed\n"); ++ return -ENOMEM; ++ } ++ ++ INIT_LIST_HEAD(&ctrl->list); ++ spin_lock_init(&ctrl->lock); ++ ctrl->dev = dev; ++ ctrl->msm_id = (uintptr_t)match->data; ++ platform_set_drvdata(pdev, ctrl); ++ ++ switch (ctrl->msm_id) { ++ case MSM8996_ID: ++ ret = msm_apm_ctrl_devm_ioremap(pdev, ctrl); ++ if (ret) { ++ dev_err(dev, "Failed to add APM controller device\n"); ++ return ret; ++ } ++ break; ++ case MSM8953_ID: ++ case IPQ807x_ID: ++ ret = msm8953_apm_ctrl_init(pdev, ctrl); ++ if (ret) { ++ dev_err(dev, "Failed to initialize APM controller device: ret=%d\n", ++ ret); ++ return ret; ++ } ++ break; ++ default: ++ dev_err(dev, "unable to add APM controller device for msm_id:%d\n", ++ ctrl->msm_id); ++ return -ENODEV; ++ } ++ ++ apm_debugfs_init(ctrl); ++ mutex_lock(&apm_ctrl_list_mutex); ++ list_add_tail(&ctrl->list, &apm_ctrl_list); ++ mutex_unlock(&apm_ctrl_list_mutex); ++ ++ dev_dbg(dev, "MSM Array Power Mux driver probe successful"); ++ ++ return ret; ++} ++ ++static int msm_apm_remove(struct platform_device *pdev) ++{ ++ struct msm_apm_ctrl_dev *ctrl_dev; ++ ++ ctrl_dev = platform_get_drvdata(pdev); ++ if (ctrl_dev) { ++ mutex_lock(&apm_ctrl_list_mutex); ++ list_del(&ctrl_dev->list); ++ mutex_unlock(&apm_ctrl_list_mutex); ++ apm_debugfs_deinit(ctrl_dev); ++ } ++ ++ return 0; ++} ++ ++static struct platform_driver msm_apm_driver = { ++ .driver = { ++ .name = MSM_APM_DRIVER_NAME, ++ .of_match_table = msm_apm_match_table, ++ .owner = THIS_MODULE, ++ }, ++ .probe = msm_apm_probe, ++ .remove = msm_apm_remove, ++}; ++ ++static int __init msm_apm_init(void) ++{ ++ apm_debugfs_base_init(); ++ return platform_driver_register(&msm_apm_driver); ++} ++ ++static void __exit msm_apm_exit(void) ++{ ++ platform_driver_unregister(&msm_apm_driver); ++ apm_debugfs_base_remove(); ++} ++ ++arch_initcall(msm_apm_init); ++module_exit(msm_apm_exit); ++ ++MODULE_DESCRIPTION("MSM Array Power Mux driver"); ++MODULE_LICENSE("GPL v2"); +--- /dev/null ++++ b/include/linux/power/qcom/apm.h +@@ -0,0 +1,48 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef __LINUX_POWER_QCOM_APM_H__ ++#define __LINUX_POWER_QCOM_APM_H__ ++ ++#include ++#include ++ ++/** ++ * enum msm_apm_supply - supported power rails to supply memory arrays ++ * %MSM_APM_SUPPLY_APCC: to enable selection of VDD_APCC rail as supply ++ * %MSM_APM_SUPPLY_MX: to enable selection of VDD_MX rail as supply ++ */ ++enum msm_apm_supply { ++ MSM_APM_SUPPLY_APCC, ++ MSM_APM_SUPPLY_MX, ++}; ++ ++/* Handle used to identify an APM controller device */ ++struct msm_apm_ctrl_dev; ++ ++#ifdef CONFIG_QCOM_APM ++struct msm_apm_ctrl_dev *msm_apm_ctrl_dev_get(struct device *dev); ++int msm_apm_set_supply(struct msm_apm_ctrl_dev *ctrl_dev, ++ enum msm_apm_supply supply); ++int msm_apm_get_supply(struct msm_apm_ctrl_dev *ctrl_dev); ++ ++#else ++static inline struct msm_apm_ctrl_dev *msm_apm_ctrl_dev_get(struct device *dev) ++{ return ERR_PTR(-EPERM); } ++static inline int msm_apm_set_supply(struct msm_apm_ctrl_dev *ctrl_dev, ++ enum msm_apm_supply supply) ++{ return -EPERM; } ++static inline int msm_apm_get_supply(struct msm_apm_ctrl_dev *ctrl_dev) ++{ return -EPERM; } ++#endif ++#endif diff --git a/target/linux/ipq807x/patches-5.15/0901-regulator-add-Qualcomm-CPR-regulators.patch b/target/linux/ipq807x/patches-5.15/0901-regulator-add-Qualcomm-CPR-regulators.patch new file mode 100644 index 0000000000..3deadea139 --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0901-regulator-add-Qualcomm-CPR-regulators.patch @@ -0,0 +1,12147 @@ +From 303fb163bb86f04432c93325ff8b9638c9e50641 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Mon, 11 Apr 2022 14:35:36 +0200 +Subject: [PATCH] regulator: add Qualcomm CPR regulators + +Add Qualcomm CPR driver, which allows using the CPR HW to calculate the +correct OPP point voltage dynamically based on the system load. + +Signed-off-by: Robert Marko +--- + drivers/regulator/Kconfig | 33 + + drivers/regulator/Makefile | 3 + + drivers/regulator/cpr3-npu-regulator.c | 695 +++ + drivers/regulator/cpr3-regulator.c | 5112 +++++++++++++++++++++++ + drivers/regulator/cpr3-regulator.h | 1211 ++++++ + drivers/regulator/cpr3-util.c | 2750 ++++++++++++ + drivers/regulator/cpr4-apss-regulator.c | 1819 ++++++++ + include/soc/qcom/socinfo.h | 463 ++ + 8 files changed, 12086 insertions(+) + create mode 100644 drivers/regulator/cpr3-npu-regulator.c + create mode 100644 drivers/regulator/cpr3-regulator.c + create mode 100644 drivers/regulator/cpr3-regulator.h + create mode 100644 drivers/regulator/cpr3-util.c + create mode 100644 drivers/regulator/cpr4-apss-regulator.c + create mode 100644 include/soc/qcom/socinfo.h + +--- a/drivers/regulator/Kconfig ++++ b/drivers/regulator/Kconfig +@@ -1423,5 +1423,38 @@ config REGULATOR_QCOM_LABIBB + boost regulator and IBB can be used as a negative boost regulator + for LCD display panel. + ++config REGULATOR_CPR3 ++ bool "QCOM CPR3 regulator core support" ++ help ++ This driver supports Core Power Reduction (CPR) version 3 controllers ++ which are used by some Qualcomm Technologies, Inc. SoCs to ++ manage important voltage regulators. CPR3 controllers are capable of ++ monitoring several ring oscillator sensing loops simultaneously. The ++ CPR3 controller informs software when the silicon conditions require ++ the supply voltage to be increased or decreased. On certain supply ++ rails, the CPR3 controller is able to propagate the voltage increase ++ or decrease requests all the way to the PMIC without software ++ involvement. ++ ++config REGULATOR_CPR3_NPU ++ bool "QCOM CPR3 regulator for NPU" ++ depends on OF && REGULATOR_CPR3 ++ help ++ This driver supports Qualcomm Technologies, Inc. NPU CPR3 ++ regulator Which will always operate in open loop. ++ ++config REGULATOR_CPR4_APSS ++ bool "QCOM CPR4 regulator for APSS" ++ depends on OF && REGULATOR_CPR3 ++ help ++ This driver supports Qualcomm Technologies, Inc. APSS application ++ processor specific features including memory array power mux (APM) ++ switching, one CPR4 thread which monitor the two APSS clusters that ++ are both powered by a shared supply, hardware closed-loop auto ++ voltage stepping, voltage adjustments based on online core count, ++ voltage adjustments based on temperature readings, and voltage ++ adjustments for performance boost mode. This driver reads both initial ++ voltage and CPR target quotient values out of hardware fuses. ++ + endif + +--- a/drivers/regulator/Makefile ++++ b/drivers/regulator/Makefile +@@ -105,6 +105,9 @@ obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qco + obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o + obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o + obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o ++obj-$(CONFIG_REGULATOR_CPR3) += cpr3-regulator.o cpr3-util.o ++obj-$(CONFIG_REGULATOR_CPR3_NPU) += cpr3-npu-regulator.o ++obj-$(CONFIG_REGULATOR_CPR4_APSS) += cpr4-apss-regulator.o + obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o + obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o + obj-$(CONFIG_REGULATOR_PF8X00) += pf8x00-regulator.o +--- /dev/null ++++ b/drivers/regulator/cpr3-npu-regulator.c +@@ -0,0 +1,695 @@ ++/* ++ * Copyright (c) 2017, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF ++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "cpr3-regulator.h" ++ ++#define IPQ807x_NPU_FUSE_CORNERS 2 ++#define IPQ817x_NPU_FUSE_CORNERS 1 ++#define IPQ807x_NPU_FUSE_STEP_VOLT 8000 ++#define IPQ807x_NPU_VOLTAGE_FUSE_SIZE 6 ++#define IPQ807x_NPU_CPR_CLOCK_RATE 19200000 ++ ++#define IPQ807x_NPU_CPR_TCSR_START 6 ++#define IPQ807x_NPU_CPR_TCSR_END 7 ++ ++#define NPU_TSENS 5 ++ ++u32 g_valid_npu_fuse_count = IPQ807x_NPU_FUSE_CORNERS; ++/** ++ * struct cpr3_ipq807x_npu_fuses - NPU specific fuse data for IPQ807x ++ * @init_voltage: Initial (i.e. open-loop) voltage fuse parameter value ++ * for each fuse corner (raw, not converted to a voltage) ++ * This struct holds the values for all of the fuses read from memory. ++ */ ++struct cpr3_ipq807x_npu_fuses { ++ u64 init_voltage[IPQ807x_NPU_FUSE_CORNERS]; ++}; ++ ++/* ++ * Constants which define the name of each fuse corner. ++ */ ++enum cpr3_ipq807x_npu_fuse_corner { ++ CPR3_IPQ807x_NPU_FUSE_CORNER_NOM = 0, ++ CPR3_IPQ807x_NPU_FUSE_CORNER_TURBO = 1, ++}; ++ ++static const char * const cpr3_ipq807x_npu_fuse_corner_name[] = { ++ [CPR3_IPQ807x_NPU_FUSE_CORNER_NOM] = "NOM", ++ [CPR3_IPQ807x_NPU_FUSE_CORNER_TURBO] = "TURBO", ++}; ++ ++/* ++ * IPQ807x NPU fuse parameter locations: ++ * ++ * Structs are organized with the following dimensions: ++ * Outer: 0 to 1 for fuse corners from lowest to highest corner ++ * Inner: large enough to hold the longest set of parameter segments which ++ * fully defines a fuse parameter, +1 (for NULL termination). ++ * Each segment corresponds to a contiguous group of bits from a ++ * single fuse row. These segments are concatentated together in ++ * order to form the full fuse parameter value. The segments for ++ * a given parameter may correspond to different fuse rows. ++ */ ++static struct cpr3_fuse_param ++ipq807x_npu_init_voltage_param[IPQ807x_NPU_FUSE_CORNERS][2] = { ++ {{73, 22, 27}, {} }, ++ {{73, 16, 21}, {} }, ++}; ++ ++/* ++ * Open loop voltage fuse reference voltages in microvolts for IPQ807x ++ */ ++static int ++ipq807x_npu_fuse_ref_volt [IPQ807x_NPU_FUSE_CORNERS] = { ++ 912000, ++ 992000, ++}; ++ ++/* ++ * IPQ9574 (Few parameters are changed, remaining are same as IPQ807x) ++ */ ++#define IPQ9574_NPU_FUSE_CORNERS 2 ++#define IPQ9574_NPU_FUSE_STEP_VOLT 10000 ++#define IPQ9574_NPU_CPR_CLOCK_RATE 24000000 ++ ++/* ++ * fues parameters for IPQ9574 ++ */ ++static struct cpr3_fuse_param ++ipq9574_npu_init_voltage_param[IPQ9574_NPU_FUSE_CORNERS][2] = { ++ {{105, 12, 17}, {} }, ++ {{105, 6, 11}, {} }, ++}; ++ ++/* ++ * Open loop voltage fuse reference voltages in microvolts for IPQ9574 ++ */ ++static int ++ipq9574_npu_fuse_ref_volt [IPQ9574_NPU_FUSE_CORNERS] = { ++ 862500, ++ 987500, ++}; ++ ++struct cpr3_controller *g_ctrl; ++ ++void cpr3_npu_temp_notify(int sensor, int temp, int low_notif) ++{ ++ u32 prev_sensor_state; ++ ++ if (sensor != NPU_TSENS) ++ return; ++ ++ prev_sensor_state = g_ctrl->cur_sensor_state; ++ if (low_notif) ++ g_ctrl->cur_sensor_state |= BIT(sensor); ++ else ++ g_ctrl->cur_sensor_state &= ~BIT(sensor); ++ ++ if (!prev_sensor_state && g_ctrl->cur_sensor_state) ++ cpr3_handle_temp_open_loop_adjustment(g_ctrl, true); ++ else if (prev_sensor_state && !g_ctrl->cur_sensor_state) ++ cpr3_handle_temp_open_loop_adjustment(g_ctrl, false); ++} ++ ++/** ++ * cpr3_ipq807x_npu_read_fuse_data() - load NPU specific fuse parameter values ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function allocates a cpr3_ipq807x_npu_fuses struct, fills it with ++ * values read out of hardware fuses, and finally copies common fuse values ++ * into the CPR3 regulator struct. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_ipq807x_npu_read_fuse_data(struct cpr3_regulator *vreg) ++{ ++ void __iomem *base = vreg->thread->ctrl->fuse_base; ++ struct cpr3_ipq807x_npu_fuses *fuse; ++ int i, rc; ++ ++ fuse = devm_kzalloc(vreg->thread->ctrl->dev, sizeof(*fuse), GFP_KERNEL); ++ if (!fuse) ++ return -ENOMEM; ++ ++ for (i = 0; i < g_valid_npu_fuse_count; i++) { ++ rc = cpr3_read_fuse_param(base, ++ vreg->cpr3_regulator_data->init_voltage_param[i], ++ &fuse->init_voltage[i]); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read fuse-corner %d initial voltage fuse, rc=%d\n", ++ i, rc); ++ return rc; ++ } ++ } ++ ++ vreg->fuse_corner_count = g_valid_npu_fuse_count; ++ vreg->platform_fuses = fuse; ++ ++ return 0; ++} ++ ++/** ++ * cpr3_npu_parse_corner_data() - parse NPU corner data from device tree ++ * properties of the CPR3 regulator's device node ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_npu_parse_corner_data(struct cpr3_regulator *vreg) ++{ ++ int rc; ++ ++ rc = cpr3_parse_common_corner_data(vreg); ++ if (rc) { ++ cpr3_err(vreg, "error reading corner data, rc=%d\n", rc); ++ return rc; ++ } ++ ++ return rc; ++} ++ ++/** ++ * cpr3_ipq807x_npu_calculate_open_loop_voltages() - calculate the open-loop ++ * voltage for each corner of a CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * @temp_correction: Temperature based correction ++ * ++ * If open-loop voltage interpolation is allowed in device tree, then ++ * this function calculates the open-loop voltage for a given corner using ++ * linear interpolation. This interpolation is performed using the processor ++ * frequencies of the lower and higher Fmax corners along with their fused ++ * open-loop voltages. ++ * ++ * If open-loop voltage interpolation is not allowed, then this function uses ++ * the Fmax fused open-loop voltage for all of the corners associated with a ++ * given fuse corner. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_ipq807x_npu_calculate_open_loop_voltages( ++ struct cpr3_regulator *vreg, bool temp_correction) ++{ ++ struct cpr3_ipq807x_npu_fuses *fuse = vreg->platform_fuses; ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ int i, j, rc = 0; ++ u64 freq_low, volt_low, freq_high, volt_high; ++ int *fuse_volt; ++ int *fmax_corner; ++ ++ fuse_volt = kcalloc(vreg->fuse_corner_count, sizeof(*fuse_volt), ++ GFP_KERNEL); ++ fmax_corner = kcalloc(vreg->fuse_corner_count, sizeof(*fmax_corner), ++ GFP_KERNEL); ++ if (!fuse_volt || !fmax_corner) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->fuse_corner_count; i++) { ++ if (ctrl->cpr_global_setting == CPR_DISABLED) ++ fuse_volt[i] = vreg->cpr3_regulator_data->fuse_ref_volt[i]; ++ else ++ fuse_volt[i] = cpr3_convert_open_loop_voltage_fuse( ++ vreg->cpr3_regulator_data->fuse_ref_volt[i], ++ vreg->cpr3_regulator_data->fuse_step_volt, ++ fuse->init_voltage[i], ++ IPQ807x_NPU_VOLTAGE_FUSE_SIZE); ++ ++ /* Log fused open-loop voltage values for debugging purposes. */ ++ cpr3_info(vreg, "fused %8s: open-loop=%7d uV\n", ++ cpr3_ipq807x_npu_fuse_corner_name[i], ++ fuse_volt[i]); ++ } ++ ++ rc = cpr3_determine_part_type(vreg, ++ fuse_volt[CPR3_IPQ807x_NPU_FUSE_CORNER_TURBO]); ++ if (rc) { ++ cpr3_err(vreg, ++ "fused part type detection failed failed, rc=%d\n", rc); ++ goto done; ++ } ++ ++ rc = cpr3_adjust_fused_open_loop_voltages(vreg, fuse_volt); ++ if (rc) { ++ cpr3_err(vreg, ++ "fused open-loop voltage adjustment failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ if (temp_correction) { ++ rc = cpr3_determine_temp_base_open_loop_correction(vreg, ++ fuse_volt); ++ if (rc) { ++ cpr3_err(vreg, ++ "temp open-loop voltage adj. failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ for (i = 1; i < vreg->fuse_corner_count; i++) { ++ if (fuse_volt[i] < fuse_volt[i - 1]) { ++ cpr3_info(vreg, ++ "fuse corner %d voltage=%d uV < fuse corner %d \ ++ voltage=%d uV; overriding: fuse corner %d \ ++ voltage=%d\n", ++ i, fuse_volt[i], i - 1, fuse_volt[i - 1], ++ i, fuse_volt[i - 1]); ++ fuse_volt[i] = fuse_volt[i - 1]; ++ } ++ } ++ ++ /* Determine highest corner mapped to each fuse corner */ ++ j = vreg->fuse_corner_count - 1; ++ for (i = vreg->corner_count - 1; i >= 0; i--) { ++ if (vreg->corner[i].cpr_fuse_corner == j) { ++ fmax_corner[j] = i; ++ j--; ++ } ++ } ++ ++ if (j >= 0) { ++ cpr3_err(vreg, "invalid fuse corner mapping\n"); ++ rc = -EINVAL; ++ goto done; ++ } ++ ++ /* ++ * Interpolation is not possible for corners mapped to the lowest fuse ++ * corner so use the fuse corner value directly. ++ */ ++ for (i = 0; i <= fmax_corner[0]; i++) ++ vreg->corner[i].open_loop_volt = fuse_volt[0]; ++ ++ /* Interpolate voltages for the higher fuse corners. */ ++ for (i = 1; i < vreg->fuse_corner_count; i++) { ++ freq_low = vreg->corner[fmax_corner[i - 1]].proc_freq; ++ volt_low = fuse_volt[i - 1]; ++ freq_high = vreg->corner[fmax_corner[i]].proc_freq; ++ volt_high = fuse_volt[i]; ++ ++ for (j = fmax_corner[i - 1] + 1; j <= fmax_corner[i]; j++) ++ vreg->corner[j].open_loop_volt = cpr3_interpolate( ++ freq_low, volt_low, freq_high, volt_high, ++ vreg->corner[j].proc_freq); ++ } ++ ++done: ++ if (rc == 0) { ++ cpr3_debug(vreg, "unadjusted per-corner open-loop voltages:\n"); ++ for (i = 0; i < vreg->corner_count; i++) ++ cpr3_debug(vreg, "open-loop[%2d] = %d uV\n", i, ++ vreg->corner[i].open_loop_volt); ++ ++ rc = cpr3_adjust_open_loop_voltages(vreg); ++ if (rc) ++ cpr3_err(vreg, ++ "open-loop voltage adjustment failed, rc=%d\n", ++ rc); ++ } ++ ++ kfree(fuse_volt); ++ kfree(fmax_corner); ++ return rc; ++} ++ ++/** ++ * cpr3_npu_print_settings() - print out NPU CPR configuration settings into ++ * the kernel log for debugging purposes ++ * @vreg: Pointer to the CPR3 regulator ++ */ ++static void cpr3_npu_print_settings(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_corner *corner; ++ int i; ++ ++ cpr3_debug(vreg, ++ "Corner: Frequency (Hz), Fuse Corner, Floor (uV), \ ++ Open-Loop (uV), Ceiling (uV)\n"); ++ for (i = 0; i < vreg->corner_count; i++) { ++ corner = &vreg->corner[i]; ++ cpr3_debug(vreg, "%3d: %10u, %2d, %7d, %7d, %7d\n", ++ i, corner->proc_freq, corner->cpr_fuse_corner, ++ corner->floor_volt, corner->open_loop_volt, ++ corner->ceiling_volt); ++ } ++ ++ if (vreg->thread->ctrl->apm) ++ cpr3_debug(vreg, "APM threshold = %d uV, APM adjust = %d uV\n", ++ vreg->thread->ctrl->apm_threshold_volt, ++ vreg->thread->ctrl->apm_adj_volt); ++} ++ ++/** ++ * cpr3_ipq807x_npu_calc_temp_based_ol_voltages() - Calculate the open loop ++ * voltages based on temperature based correction margins ++ * @vreg: Pointer to the CPR3 regulator ++ */ ++ ++static int ++cpr3_ipq807x_npu_calc_temp_based_ol_voltages(struct cpr3_regulator *vreg, ++ bool temp_correction) ++{ ++ int rc, i; ++ ++ rc = cpr3_ipq807x_npu_calculate_open_loop_voltages(vreg, ++ temp_correction); ++ if (rc) { ++ cpr3_err(vreg, ++ "unable to calculate open-loop voltages, rc=%d\n", rc); ++ return rc; ++ } ++ ++ rc = cpr3_limit_open_loop_voltages(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to limit open-loop voltages, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ cpr3_open_loop_voltage_as_ceiling(vreg); ++ ++ rc = cpr3_limit_floor_voltages(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to limit floor voltages, rc=%d\n", rc); ++ return rc; ++ } ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ if (temp_correction) ++ vreg->corner[i].cold_temp_open_loop_volt = ++ vreg->corner[i].open_loop_volt; ++ else ++ vreg->corner[i].normal_temp_open_loop_volt = ++ vreg->corner[i].open_loop_volt; ++ } ++ ++ cpr3_npu_print_settings(vreg); ++ ++ return rc; ++} ++ ++/** ++ * cpr3_npu_init_thread() - perform steps necessary to initialize the ++ * configuration data for a CPR3 thread ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_npu_init_thread(struct cpr3_thread *thread) ++{ ++ int rc; ++ ++ rc = cpr3_parse_common_thread_data(thread); ++ if (rc) { ++ cpr3_err(thread->ctrl, ++ "thread %u CPR thread data from DT- failed, rc=%d\n", ++ thread->thread_id, rc); ++ return rc; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_npu_init_regulator() - perform all steps necessary to initialize the ++ * configuration data for a CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_npu_init_regulator(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_ipq807x_npu_fuses *fuse; ++ int rc, cold_temp = 0; ++ bool can_adj_cold_temp = cpr3_can_adjust_cold_temp(vreg); ++ ++ rc = cpr3_ipq807x_npu_read_fuse_data(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to read CPR fuse data, rc=%d\n", rc); ++ return rc; ++ } ++ ++ fuse = vreg->platform_fuses; ++ ++ rc = cpr3_npu_parse_corner_data(vreg); ++ if (rc) { ++ cpr3_err(vreg, ++ "Cannot read CPR corner data from DT, rc=%d\n", rc); ++ return rc; ++ } ++ ++ rc = cpr3_mem_acc_init(vreg); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(vreg, ++ "Cannot initialize mem-acc regulator settings, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (can_adj_cold_temp) { ++ rc = cpr3_ipq807x_npu_calc_temp_based_ol_voltages(vreg, true); ++ if (rc) { ++ cpr3_err(vreg, ++ "unable to calculate open-loop voltages, rc=%d\n", rc); ++ return rc; ++ } ++ } ++ ++ rc = cpr3_ipq807x_npu_calc_temp_based_ol_voltages(vreg, false); ++ if (rc) { ++ cpr3_err(vreg, ++ "unable to calculate open-loop voltages, rc=%d\n", rc); ++ return rc; ++ } ++ ++ if (can_adj_cold_temp) { ++ cpr3_info(vreg, ++ "Normal and Cold condition init done. Default to normal.\n"); ++ ++ rc = cpr3_get_cold_temp_threshold(vreg, &cold_temp); ++ if (rc) { ++ cpr3_err(vreg, ++ "Get cold temperature threshold failed, rc=%d\n", rc); ++ return rc; ++ } ++ register_low_temp_notif(NPU_TSENS, cold_temp, ++ cpr3_npu_temp_notify); ++ } ++ ++ return rc; ++} ++ ++/** ++ * cpr3_npu_init_controller() - perform NPU CPR3 controller specific ++ * initializations ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_npu_init_controller(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ rc = cpr3_parse_open_loop_common_ctrl_data(ctrl); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable to parse common controller data, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ ctrl->ctrl_type = CPR_CTRL_TYPE_CPR3; ++ ctrl->supports_hw_closed_loop = false; ++ ++ return 0; ++} ++ ++static const struct cpr3_reg_data ipq807x_cpr_npu = { ++ .cpr_valid_fuse_count = IPQ807x_NPU_FUSE_CORNERS, ++ .init_voltage_param = ipq807x_npu_init_voltage_param, ++ .fuse_ref_volt = ipq807x_npu_fuse_ref_volt, ++ .fuse_step_volt = IPQ807x_NPU_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ807x_NPU_CPR_CLOCK_RATE, ++}; ++ ++static const struct cpr3_reg_data ipq817x_cpr_npu = { ++ .cpr_valid_fuse_count = IPQ817x_NPU_FUSE_CORNERS, ++ .init_voltage_param = ipq807x_npu_init_voltage_param, ++ .fuse_ref_volt = ipq807x_npu_fuse_ref_volt, ++ .fuse_step_volt = IPQ807x_NPU_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ807x_NPU_CPR_CLOCK_RATE, ++}; ++ ++static const struct cpr3_reg_data ipq9574_cpr_npu = { ++ .cpr_valid_fuse_count = IPQ9574_NPU_FUSE_CORNERS, ++ .init_voltage_param = ipq9574_npu_init_voltage_param, ++ .fuse_ref_volt = ipq9574_npu_fuse_ref_volt, ++ .fuse_step_volt = IPQ9574_NPU_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ9574_NPU_CPR_CLOCK_RATE, ++}; ++ ++static struct of_device_id cpr3_regulator_match_table[] = { ++ { ++ .compatible = "qcom,cpr3-ipq807x-npu-regulator", ++ .data = &ipq807x_cpr_npu ++ }, ++ { ++ .compatible = "qcom,cpr3-ipq817x-npu-regulator", ++ .data = &ipq817x_cpr_npu ++ }, ++ { ++ .compatible = "qcom,cpr3-ipq9574-npu-regulator", ++ .data = &ipq9574_cpr_npu ++ }, ++ {} ++}; ++ ++static int cpr3_npu_regulator_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct cpr3_controller *ctrl; ++ int i, rc; ++ const struct of_device_id *match; ++ struct cpr3_reg_data *cpr_data; ++ ++ if (!dev->of_node) { ++ dev_err(dev, "Device tree node is missing\n"); ++ return -EINVAL; ++ } ++ ++ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); ++ if (!ctrl) ++ return -ENOMEM; ++ g_ctrl = ctrl; ++ ++ match = of_match_device(cpr3_regulator_match_table, &pdev->dev); ++ if (!match) ++ return -ENODEV; ++ ++ cpr_data = (struct cpr3_reg_data *)match->data; ++ g_valid_npu_fuse_count = cpr_data->cpr_valid_fuse_count; ++ dev_info(dev, "NPU CPR valid fuse count: %d\n", g_valid_npu_fuse_count); ++ ctrl->cpr_clock_rate = cpr_data->cpr_clk_rate; ++ ++ ctrl->dev = dev; ++ /* Set to false later if anything precludes CPR operation. */ ++ ctrl->cpr_allowed_hw = true; ++ ++ rc = of_property_read_string(dev->of_node, "qcom,cpr-ctrl-name", ++ &ctrl->name); ++ if (rc) { ++ cpr3_err(ctrl, "unable to read qcom,cpr-ctrl-name, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr3_map_fuse_base(ctrl, pdev); ++ if (rc) { ++ cpr3_err(ctrl, "could not map fuse base address\n"); ++ return rc; ++ } ++ ++ rc = cpr3_read_tcsr_setting(ctrl, pdev, IPQ807x_NPU_CPR_TCSR_START, ++ IPQ807x_NPU_CPR_TCSR_END); ++ if (rc) { ++ cpr3_err(ctrl, "could not read CPR tcsr rsetting\n"); ++ return rc; ++ } ++ ++ rc = cpr3_allocate_threads(ctrl, 0, 0); ++ if (rc) { ++ cpr3_err(ctrl, "failed to allocate CPR thread array, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (ctrl->thread_count != 1) { ++ cpr3_err(ctrl, "expected 1 thread but found %d\n", ++ ctrl->thread_count); ++ return -EINVAL; ++ } ++ ++ rc = cpr3_npu_init_controller(ctrl); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "failed to initialize CPR controller parameters, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr3_npu_init_thread(&ctrl->thread[0]); ++ if (rc) { ++ cpr3_err(ctrl, "thread initialization failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ for (i = 0; i < ctrl->thread[0].vreg_count; i++) { ++ ctrl->thread[0].vreg[i].cpr3_regulator_data = cpr_data; ++ rc = cpr3_npu_init_regulator(&ctrl->thread[0].vreg[i]); ++ if (rc) { ++ cpr3_err(&ctrl->thread[0].vreg[i], "regulator initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ platform_set_drvdata(pdev, ctrl); ++ ++ return cpr3_open_loop_regulator_register(pdev, ctrl); ++} ++ ++static int cpr3_npu_regulator_remove(struct platform_device *pdev) ++{ ++ struct cpr3_controller *ctrl = platform_get_drvdata(pdev); ++ ++ return cpr3_open_loop_regulator_unregister(ctrl); ++} ++ ++static struct platform_driver cpr3_npu_regulator_driver = { ++ .driver = { ++ .name = "qcom,cpr3-npu-regulator", ++ .of_match_table = cpr3_regulator_match_table, ++ .owner = THIS_MODULE, ++ }, ++ .probe = cpr3_npu_regulator_probe, ++ .remove = cpr3_npu_regulator_remove, ++}; ++ ++static int cpr3_regulator_init(void) ++{ ++ return platform_driver_register(&cpr3_npu_regulator_driver); ++} ++arch_initcall(cpr3_regulator_init); ++ ++static void cpr3_regulator_exit(void) ++{ ++ platform_driver_unregister(&cpr3_npu_regulator_driver); ++} ++module_exit(cpr3_regulator_exit); ++ ++MODULE_DESCRIPTION("QCOM CPR3 NPU regulator driver"); ++MODULE_LICENSE("Dual BSD/GPLv2"); ++MODULE_ALIAS("platform:npu-ipq807x"); +--- /dev/null ++++ b/drivers/regulator/cpr3-regulator.c +@@ -0,0 +1,5112 @@ ++/* ++ * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#define pr_fmt(fmt) "%s: " fmt, __func__ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "cpr3-regulator.h" ++ ++#define CPR3_REGULATOR_CORNER_INVALID (-1) ++#define CPR3_RO_MASK GENMASK(CPR3_RO_COUNT - 1, 0) ++ ++/* CPR3 registers */ ++#define CPR3_REG_CPR_CTL 0x4 ++#define CPR3_CPR_CTL_LOOP_EN_MASK BIT(0) ++#define CPR3_CPR_CTL_LOOP_ENABLE BIT(0) ++#define CPR3_CPR_CTL_LOOP_DISABLE 0 ++#define CPR3_CPR_CTL_IDLE_CLOCKS_MASK GENMASK(5, 1) ++#define CPR3_CPR_CTL_IDLE_CLOCKS_SHIFT 1 ++#define CPR3_CPR_CTL_COUNT_MODE_MASK GENMASK(7, 6) ++#define CPR3_CPR_CTL_COUNT_MODE_SHIFT 6 ++#define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN 0 ++#define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MAX 1 ++#define CPR3_CPR_CTL_COUNT_MODE_STAGGERED 2 ++#define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_AGE 3 ++#define CPR3_CPR_CTL_COUNT_REPEAT_MASK GENMASK(31, 9) ++#define CPR3_CPR_CTL_COUNT_REPEAT_SHIFT 9 ++ ++#define CPR3_REG_CPR_STATUS 0x8 ++#define CPR3_CPR_STATUS_BUSY_MASK BIT(0) ++#define CPR3_CPR_STATUS_AGING_MEASUREMENT_MASK BIT(1) ++ ++/* ++ * This register is not present on controllers that support HW closed-loop ++ * except CPR4 APSS controller. ++ */ ++#define CPR3_REG_CPR_TIMER_AUTO_CONT 0xC ++ ++#define CPR3_REG_CPR_STEP_QUOT 0x14 ++#define CPR3_CPR_STEP_QUOT_MIN_MASK GENMASK(5, 0) ++#define CPR3_CPR_STEP_QUOT_MIN_SHIFT 0 ++#define CPR3_CPR_STEP_QUOT_MAX_MASK GENMASK(11, 6) ++#define CPR3_CPR_STEP_QUOT_MAX_SHIFT 6 ++ ++#define CPR3_REG_GCNT(ro) (0xA0 + 0x4 * (ro)) ++ ++#define CPR3_REG_SENSOR_BYPASS_WRITE(sensor) (0xE0 + 0x4 * ((sensor) / 32)) ++#define CPR3_REG_SENSOR_BYPASS_WRITE_BANK(bank) (0xE0 + 0x4 * (bank)) ++ ++#define CPR3_REG_SENSOR_MASK_WRITE(sensor) (0x120 + 0x4 * ((sensor) / 32)) ++#define CPR3_REG_SENSOR_MASK_WRITE_BANK(bank) (0x120 + 0x4 * (bank)) ++#define CPR3_REG_SENSOR_MASK_READ(sensor) (0x140 + 0x4 * ((sensor) / 32)) ++ ++#define CPR3_REG_SENSOR_OWNER(sensor) (0x200 + 0x4 * (sensor)) ++ ++#define CPR3_REG_CONT_CMD 0x800 ++#define CPR3_CONT_CMD_ACK 0x1 ++#define CPR3_CONT_CMD_NACK 0x0 ++ ++#define CPR3_REG_THRESH(thread) (0x808 + 0x440 * (thread)) ++#define CPR3_THRESH_CONS_DOWN_MASK GENMASK(3, 0) ++#define CPR3_THRESH_CONS_DOWN_SHIFT 0 ++#define CPR3_THRESH_CONS_UP_MASK GENMASK(7, 4) ++#define CPR3_THRESH_CONS_UP_SHIFT 4 ++#define CPR3_THRESH_DOWN_THRESH_MASK GENMASK(12, 8) ++#define CPR3_THRESH_DOWN_THRESH_SHIFT 8 ++#define CPR3_THRESH_UP_THRESH_MASK GENMASK(17, 13) ++#define CPR3_THRESH_UP_THRESH_SHIFT 13 ++ ++#define CPR3_REG_RO_MASK(thread) (0x80C + 0x440 * (thread)) ++ ++#define CPR3_REG_RESULT0(thread) (0x810 + 0x440 * (thread)) ++#define CPR3_RESULT0_BUSY_MASK BIT(0) ++#define CPR3_RESULT0_STEP_DN_MASK BIT(1) ++#define CPR3_RESULT0_STEP_UP_MASK BIT(2) ++#define CPR3_RESULT0_ERROR_STEPS_MASK GENMASK(7, 3) ++#define CPR3_RESULT0_ERROR_STEPS_SHIFT 3 ++#define CPR3_RESULT0_ERROR_MASK GENMASK(19, 8) ++#define CPR3_RESULT0_ERROR_SHIFT 8 ++#define CPR3_RESULT0_NEGATIVE_MASK BIT(20) ++ ++#define CPR3_REG_RESULT1(thread) (0x814 + 0x440 * (thread)) ++#define CPR3_RESULT1_QUOT_MIN_MASK GENMASK(11, 0) ++#define CPR3_RESULT1_QUOT_MIN_SHIFT 0 ++#define CPR3_RESULT1_QUOT_MAX_MASK GENMASK(23, 12) ++#define CPR3_RESULT1_QUOT_MAX_SHIFT 12 ++#define CPR3_RESULT1_RO_MIN_MASK GENMASK(27, 24) ++#define CPR3_RESULT1_RO_MIN_SHIFT 24 ++#define CPR3_RESULT1_RO_MAX_MASK GENMASK(31, 28) ++#define CPR3_RESULT1_RO_MAX_SHIFT 28 ++ ++#define CPR3_REG_RESULT2(thread) (0x818 + 0x440 * (thread)) ++#define CPR3_RESULT2_STEP_QUOT_MIN_MASK GENMASK(5, 0) ++#define CPR3_RESULT2_STEP_QUOT_MIN_SHIFT 0 ++#define CPR3_RESULT2_STEP_QUOT_MAX_MASK GENMASK(11, 6) ++#define CPR3_RESULT2_STEP_QUOT_MAX_SHIFT 6 ++#define CPR3_RESULT2_SENSOR_MIN_MASK GENMASK(23, 16) ++#define CPR3_RESULT2_SENSOR_MIN_SHIFT 16 ++#define CPR3_RESULT2_SENSOR_MAX_MASK GENMASK(31, 24) ++#define CPR3_RESULT2_SENSOR_MAX_SHIFT 24 ++ ++#define CPR3_REG_IRQ_EN 0x81C ++#define CPR3_REG_IRQ_CLEAR 0x820 ++#define CPR3_REG_IRQ_STATUS 0x824 ++#define CPR3_IRQ_UP BIT(3) ++#define CPR3_IRQ_MID BIT(2) ++#define CPR3_IRQ_DOWN BIT(1) ++ ++#define CPR3_REG_TARGET_QUOT(thread, ro) \ ++ (0x840 + 0x440 * (thread) + 0x4 * (ro)) ++ ++/* Registers found only on controllers that support HW closed-loop. */ ++#define CPR3_REG_PD_THROTTLE 0xE8 ++#define CPR3_PD_THROTTLE_DISABLE 0x0 ++ ++#define CPR3_REG_HW_CLOSED_LOOP 0x3000 ++#define CPR3_HW_CLOSED_LOOP_ENABLE 0x0 ++#define CPR3_HW_CLOSED_LOOP_DISABLE 0x1 ++ ++#define CPR3_REG_CPR_TIMER_MID_CONT 0x3004 ++#define CPR3_REG_CPR_TIMER_UP_DN_CONT 0x3008 ++ ++#define CPR3_REG_LAST_MEASUREMENT 0x7F8 ++#define CPR3_LAST_MEASUREMENT_THREAD_DN_SHIFT 0 ++#define CPR3_LAST_MEASUREMENT_THREAD_UP_SHIFT 4 ++#define CPR3_LAST_MEASUREMENT_THREAD_DN(thread) \ ++ (BIT(thread) << CPR3_LAST_MEASUREMENT_THREAD_DN_SHIFT) ++#define CPR3_LAST_MEASUREMENT_THREAD_UP(thread) \ ++ (BIT(thread) << CPR3_LAST_MEASUREMENT_THREAD_UP_SHIFT) ++#define CPR3_LAST_MEASUREMENT_AGGR_DN BIT(8) ++#define CPR3_LAST_MEASUREMENT_AGGR_MID BIT(9) ++#define CPR3_LAST_MEASUREMENT_AGGR_UP BIT(10) ++#define CPR3_LAST_MEASUREMENT_VALID BIT(11) ++#define CPR3_LAST_MEASUREMENT_SAW_ERROR BIT(12) ++#define CPR3_LAST_MEASUREMENT_PD_BYPASS_MASK GENMASK(23, 16) ++#define CPR3_LAST_MEASUREMENT_PD_BYPASS_SHIFT 16 ++ ++/* CPR4 controller specific registers and bit definitions */ ++#define CPR4_REG_CPR_TIMER_CLAMP 0x10 ++#define CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN BIT(27) ++ ++#define CPR4_REG_MISC 0x700 ++#define CPR4_MISC_MARGIN_TABLE_ROW_SELECT_MASK GENMASK(23, 20) ++#define CPR4_MISC_MARGIN_TABLE_ROW_SELECT_SHIFT 20 ++#define CPR4_MISC_TEMP_SENSOR_ID_START_MASK GENMASK(27, 24) ++#define CPR4_MISC_TEMP_SENSOR_ID_START_SHIFT 24 ++#define CPR4_MISC_TEMP_SENSOR_ID_END_MASK GENMASK(31, 28) ++#define CPR4_MISC_TEMP_SENSOR_ID_END_SHIFT 28 ++ ++#define CPR4_REG_SAW_ERROR_STEP_LIMIT 0x7A4 ++#define CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK GENMASK(4, 0) ++#define CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT 0 ++#define CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK GENMASK(9, 5) ++#define CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT 5 ++ ++#define CPR4_REG_MARGIN_TEMP_CORE_TIMERS 0x7A8 ++#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK GENMASK(28, 18) ++#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHIFT 18 ++ ++#define CPR4_REG_MARGIN_TEMP_CORE(core) (0x7AC + 0x4 * (core)) ++#define CPR4_MARGIN_TEMP_CORE_ADJ_MASK GENMASK(7, 0) ++#define CPR4_MARGIN_TEMP_CORE_ADJ_SHIFT 8 ++ ++#define CPR4_REG_MARGIN_TEMP_POINT0N1 0x7F0 ++#define CPR4_MARGIN_TEMP_POINT0_MASK GENMASK(11, 0) ++#define CPR4_MARGIN_TEMP_POINT0_SHIFT 0 ++#define CPR4_MARGIN_TEMP_POINT1_MASK GENMASK(23, 12) ++#define CPR4_MARGIN_TEMP_POINT1_SHIFT 12 ++#define CPR4_REG_MARGIN_TEMP_POINT2 0x7F4 ++#define CPR4_MARGIN_TEMP_POINT2_MASK GENMASK(11, 0) ++#define CPR4_MARGIN_TEMP_POINT2_SHIFT 0 ++ ++#define CPR4_REG_MARGIN_ADJ_CTL 0x7F8 ++#define CPR4_MARGIN_ADJ_CTL_BOOST_EN BIT(0) ++#define CPR4_MARGIN_ADJ_CTL_CORE_ADJ_EN BIT(1) ++#define CPR4_MARGIN_ADJ_CTL_TEMP_ADJ_EN BIT(2) ++#define CPR4_MARGIN_ADJ_CTL_TIMER_SETTLE_VOLTAGE_EN BIT(3) ++#define CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK BIT(4) ++#define CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE BIT(4) ++#define CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE 0 ++#define CPR4_MARGIN_ADJ_CTL_PER_RO_KV_MARGIN_EN BIT(7) ++#define CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_EN BIT(8) ++#define CPR4_MARGIN_ADJ_CTL_PMIC_STEP_SIZE_MASK GENMASK(16, 12) ++#define CPR4_MARGIN_ADJ_CTL_PMIC_STEP_SIZE_SHIFT 12 ++#define CPR4_MARGIN_ADJ_CTL_INITIAL_TEMP_BAND_MASK GENMASK(21, 19) ++#define CPR4_MARGIN_ADJ_CTL_INITIAL_TEMP_BAND_SHIFT 19 ++#define CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_MASK GENMASK(25, 22) ++#define CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_SHIFT 22 ++#define CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_STEP_QUOT_MASK GENMASK(31, 26) ++#define CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_STEP_QUOT_SHIFT 26 ++ ++#define CPR4_REG_CPR_MASK_THREAD(thread) (0x80C + 0x440 * (thread)) ++#define CPR4_CPR_MASK_THREAD_DISABLE_THREAD BIT(31) ++#define CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK GENMASK(15, 0) ++ ++/* ++ * The amount of time to wait for the CPR controller to become idle when ++ * performing an aging measurement. ++ */ ++#define CPR3_AGING_MEASUREMENT_TIMEOUT_NS 5000000 ++ ++/* ++ * The number of individual aging measurements to perform which are then ++ * averaged together in order to determine the final aging adjustment value. ++ */ ++#define CPR3_AGING_MEASUREMENT_ITERATIONS 16 ++ ++/* ++ * Aging measurements for the aged and unaged ring oscillators take place a few ++ * microseconds apart. If the vdd-supply voltage fluctuates between the two ++ * measurements, then the difference between them will be incorrect. The ++ * difference could end up too high or too low. This constant defines the ++ * number of lowest and highest measurements to ignore when averaging. ++ */ ++#define CPR3_AGING_MEASUREMENT_FILTER 3 ++ ++/* ++ * The number of times to attempt the full aging measurement sequence before ++ * declaring a measurement failure. ++ */ ++#define CPR3_AGING_RETRY_COUNT 5 ++ ++/* ++ * The maximum time to wait in microseconds for a CPR register write to ++ * complete. ++ */ ++#define CPR3_REGISTER_WRITE_DELAY_US 200 ++ ++static DEFINE_MUTEX(cpr3_controller_list_mutex); ++static LIST_HEAD(cpr3_controller_list); ++static struct dentry *cpr3_debugfs_base; ++ ++/** ++ * cpr3_read() - read four bytes from the memory address specified ++ * @ctrl: Pointer to the CPR3 controller ++ * @offset: Offset in bytes from the CPR3 controller's base address ++ * ++ * Return: memory address value ++ */ ++static inline u32 cpr3_read(struct cpr3_controller *ctrl, u32 offset) ++{ ++ if (!ctrl->cpr_enabled) { ++ cpr3_err(ctrl, "CPR register reads are not possible when CPR clocks are disabled\n"); ++ return 0; ++ } ++ ++ return readl_relaxed(ctrl->cpr_ctrl_base + offset); ++} ++ ++/** ++ * cpr3_write() - write four bytes to the memory address specified ++ * @ctrl: Pointer to the CPR3 controller ++ * @offset: Offset in bytes from the CPR3 controller's base address ++ * @value: Value to write to the memory address ++ * ++ * Return: none ++ */ ++static inline void cpr3_write(struct cpr3_controller *ctrl, u32 offset, ++ u32 value) ++{ ++ if (!ctrl->cpr_enabled) { ++ cpr3_err(ctrl, "CPR register writes are not possible when CPR clocks are disabled\n"); ++ return; ++ } ++ ++ writel_relaxed(value, ctrl->cpr_ctrl_base + offset); ++} ++ ++/** ++ * cpr3_masked_write() - perform a read-modify-write sequence so that only ++ * masked bits are modified ++ * @ctrl: Pointer to the CPR3 controller ++ * @offset: Offset in bytes from the CPR3 controller's base address ++ * @mask: Mask identifying the bits that should be modified ++ * @value: Value to write to the memory address ++ * ++ * Return: none ++ */ ++static inline void cpr3_masked_write(struct cpr3_controller *ctrl, u32 offset, ++ u32 mask, u32 value) ++{ ++ u32 reg_val, orig_val; ++ ++ if (!ctrl->cpr_enabled) { ++ cpr3_err(ctrl, "CPR register writes are not possible when CPR clocks are disabled\n"); ++ return; ++ } ++ ++ reg_val = orig_val = readl_relaxed(ctrl->cpr_ctrl_base + offset); ++ reg_val &= ~mask; ++ reg_val |= value & mask; ++ ++ if (reg_val != orig_val) ++ writel_relaxed(reg_val, ctrl->cpr_ctrl_base + offset); ++} ++ ++/** ++ * cpr3_ctrl_loop_enable() - enable the CPR sensing loop for a given controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: none ++ */ ++static inline void cpr3_ctrl_loop_enable(struct cpr3_controller *ctrl) ++{ ++ if (ctrl->cpr_enabled && !(ctrl->aggr_corner.sdelta ++ && ctrl->aggr_corner.sdelta->allow_boost)) ++ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL, ++ CPR3_CPR_CTL_LOOP_EN_MASK, CPR3_CPR_CTL_LOOP_ENABLE); ++} ++ ++/** ++ * cpr3_ctrl_loop_disable() - disable the CPR sensing loop for a given ++ * controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: none ++ */ ++static inline void cpr3_ctrl_loop_disable(struct cpr3_controller *ctrl) ++{ ++ if (ctrl->cpr_enabled) ++ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL, ++ CPR3_CPR_CTL_LOOP_EN_MASK, CPR3_CPR_CTL_LOOP_DISABLE); ++} ++ ++/** ++ * cpr3_clock_enable() - prepare and enable all clocks used by this CPR3 ++ * controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_clock_enable(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ rc = clk_prepare_enable(ctrl->bus_clk); ++ if (rc) { ++ cpr3_err(ctrl, "failed to enable bus clock, rc=%d\n", rc); ++ return rc; ++ } ++ ++ rc = clk_prepare_enable(ctrl->iface_clk); ++ if (rc) { ++ cpr3_err(ctrl, "failed to enable interface clock, rc=%d\n", rc); ++ clk_disable_unprepare(ctrl->bus_clk); ++ return rc; ++ } ++ ++ rc = clk_prepare_enable(ctrl->core_clk); ++ if (rc) { ++ cpr3_err(ctrl, "failed to enable core clock, rc=%d\n", rc); ++ clk_disable_unprepare(ctrl->iface_clk); ++ clk_disable_unprepare(ctrl->bus_clk); ++ return rc; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_clock_disable() - disable and unprepare all clocks used by this CPR3 ++ * controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: none ++ */ ++static void cpr3_clock_disable(struct cpr3_controller *ctrl) ++{ ++ clk_disable_unprepare(ctrl->core_clk); ++ clk_disable_unprepare(ctrl->iface_clk); ++ clk_disable_unprepare(ctrl->bus_clk); ++} ++ ++/** ++ * cpr3_ctrl_clear_cpr4_config() - clear the CPR4 register configuration ++ * programmed for current aggregated corner of a given controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static inline int cpr3_ctrl_clear_cpr4_config(struct cpr3_controller *ctrl) ++{ ++ struct cpr4_sdelta *aggr_sdelta = ctrl->aggr_corner.sdelta; ++ bool cpr_enabled = ctrl->cpr_enabled; ++ int i, rc = 0; ++ ++ if (!aggr_sdelta || !(aggr_sdelta->allow_core_count_adj ++ || aggr_sdelta->allow_temp_adj || aggr_sdelta->allow_boost)) ++ /* cpr4 features are not enabled */ ++ return 0; ++ ++ /* Ensure that CPR clocks are enabled before writing to registers. */ ++ if (!cpr_enabled) { ++ rc = cpr3_clock_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "clock enable failed, rc=%d\n", rc); ++ return rc; ++ } ++ ctrl->cpr_enabled = true; ++ } ++ ++ /* ++ * Clear feature enable configuration made for current ++ * aggregated corner. ++ */ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_MASK ++ | CPR4_MARGIN_ADJ_CTL_CORE_ADJ_EN ++ | CPR4_MARGIN_ADJ_CTL_TEMP_ADJ_EN ++ | CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_EN ++ | CPR4_MARGIN_ADJ_CTL_BOOST_EN ++ | CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK, 0); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MISC, ++ CPR4_MISC_MARGIN_TABLE_ROW_SELECT_MASK, ++ 0 << CPR4_MISC_MARGIN_TABLE_ROW_SELECT_SHIFT); ++ ++ for (i = 0; i <= aggr_sdelta->max_core_count; i++) { ++ /* Clear voltage margin adjustments programmed in TEMP_COREi */ ++ cpr3_write(ctrl, CPR4_REG_MARGIN_TEMP_CORE(i), 0); ++ } ++ ++ /* Turn off CPR clocks if they were off before this function call. */ ++ if (!cpr_enabled) { ++ cpr3_clock_disable(ctrl); ++ ctrl->cpr_enabled = false; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_closed_loop_enable() - enable logical CPR closed-loop operation ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_closed_loop_enable(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ if (!ctrl->cpr_allowed_hw || !ctrl->cpr_allowed_sw) { ++ cpr3_err(ctrl, "cannot enable closed-loop CPR operation because it is disallowed\n"); ++ return -EPERM; ++ } else if (ctrl->cpr_enabled) { ++ /* Already enabled */ ++ return 0; ++ } else if (ctrl->cpr_suspended) { ++ /* ++ * CPR must remain disabled as the system is entering suspend. ++ */ ++ return 0; ++ } ++ ++ rc = cpr3_clock_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "unable to enable CPR clocks, rc=%d\n", rc); ++ return rc; ++ } ++ ++ ctrl->cpr_enabled = true; ++ cpr3_debug(ctrl, "CPR closed-loop operation enabled\n"); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_closed_loop_disable() - disable logical CPR closed-loop operation ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static inline int cpr3_closed_loop_disable(struct cpr3_controller *ctrl) ++{ ++ if (!ctrl->cpr_enabled) { ++ /* Already disabled */ ++ return 0; ++ } ++ ++ cpr3_clock_disable(ctrl); ++ ctrl->cpr_enabled = false; ++ cpr3_debug(ctrl, "CPR closed-loop operation disabled\n"); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_get_gcnt() - returns the GCNT register value corresponding ++ * to the clock rate and sensor time of the CPR3 controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: GCNT value ++ */ ++static u32 cpr3_regulator_get_gcnt(struct cpr3_controller *ctrl) ++{ ++ u64 temp; ++ unsigned int remainder; ++ u32 gcnt; ++ ++ temp = (u64)ctrl->cpr_clock_rate * (u64)ctrl->sensor_time; ++ remainder = do_div(temp, 1000000000); ++ if (remainder) ++ temp++; ++ /* ++ * GCNT == 0 corresponds to a single ref clock measurement interval so ++ * offset GCNT values by 1. ++ */ ++ gcnt = temp - 1; ++ ++ return gcnt; ++} ++ ++/** ++ * cpr3_regulator_init_thread() - performs hardware initialization of CPR ++ * thread registers ++ * @thread: Pointer to the CPR3 thread ++ * ++ * CPR interface/bus clocks must be enabled before calling this function. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_init_thread(struct cpr3_thread *thread) ++{ ++ u32 reg; ++ ++ reg = (thread->consecutive_up << CPR3_THRESH_CONS_UP_SHIFT) ++ & CPR3_THRESH_CONS_UP_MASK; ++ reg |= (thread->consecutive_down << CPR3_THRESH_CONS_DOWN_SHIFT) ++ & CPR3_THRESH_CONS_DOWN_MASK; ++ reg |= (thread->up_threshold << CPR3_THRESH_UP_THRESH_SHIFT) ++ & CPR3_THRESH_UP_THRESH_MASK; ++ reg |= (thread->down_threshold << CPR3_THRESH_DOWN_THRESH_SHIFT) ++ & CPR3_THRESH_DOWN_THRESH_MASK; ++ ++ cpr3_write(thread->ctrl, CPR3_REG_THRESH(thread->thread_id), reg); ++ ++ /* ++ * Mask all RO's initially so that unused thread doesn't contribute ++ * to closed-loop voltage. ++ */ ++ cpr3_write(thread->ctrl, CPR3_REG_RO_MASK(thread->thread_id), ++ CPR3_RO_MASK); ++ ++ return 0; ++} ++ ++/** ++ * cpr4_regulator_init_temp_points() - performs hardware initialization of CPR4 ++ * registers to track tsen temperature data and also specify the ++ * temperature band range values to apply different voltage margins ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * CPR interface/bus clocks must be enabled before calling this function. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_regulator_init_temp_points(struct cpr3_controller *ctrl) ++{ ++ if (!ctrl->allow_temp_adj) ++ return 0; ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MISC, ++ CPR4_MISC_TEMP_SENSOR_ID_START_MASK, ++ ctrl->temp_sensor_id_start ++ << CPR4_MISC_TEMP_SENSOR_ID_START_SHIFT); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MISC, ++ CPR4_MISC_TEMP_SENSOR_ID_END_MASK, ++ ctrl->temp_sensor_id_end ++ << CPR4_MISC_TEMP_SENSOR_ID_END_SHIFT); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_TEMP_POINT2, ++ CPR4_MARGIN_TEMP_POINT2_MASK, ++ (ctrl->temp_band_count == 4 ? ctrl->temp_points[2] : 0x7FF) ++ << CPR4_MARGIN_TEMP_POINT2_SHIFT); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_TEMP_POINT0N1, ++ CPR4_MARGIN_TEMP_POINT1_MASK, ++ (ctrl->temp_band_count >= 3 ? ctrl->temp_points[1] : 0x7FF) ++ << CPR4_MARGIN_TEMP_POINT1_SHIFT); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_TEMP_POINT0N1, ++ CPR4_MARGIN_TEMP_POINT0_MASK, ++ (ctrl->temp_band_count >= 2 ? ctrl->temp_points[0] : 0x7FF) ++ << CPR4_MARGIN_TEMP_POINT0_SHIFT); ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_init_cpr4() - performs hardware initialization at the ++ * controller and thread level required for CPR4 operation. ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * CPR interface/bus clocks must be enabled before calling this function. ++ * This function allocates sdelta structures and sdelta tables for aggregated ++ * corners of the controller and its threads. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_init_cpr4(struct cpr3_controller *ctrl) ++{ ++ struct cpr3_thread *thread; ++ struct cpr3_regulator *vreg; ++ struct cpr4_sdelta *sdelta; ++ int i, j, ctrl_max_core_count, thread_max_core_count, rc = 0; ++ bool ctrl_valid_sdelta, thread_valid_sdelta; ++ u32 pmic_step_size = 1; ++ int thread_id = 0; ++ u64 temp; ++ ++ if (ctrl->supports_hw_closed_loop) { ++ if (ctrl->saw_use_unit_mV) ++ pmic_step_size = ctrl->step_volt / 1000; ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_PMIC_STEP_SIZE_MASK, ++ (pmic_step_size ++ << CPR4_MARGIN_ADJ_CTL_PMIC_STEP_SIZE_SHIFT)); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_SAW_ERROR_STEP_LIMIT, ++ CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK, ++ (ctrl->down_error_step_limit ++ << CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT)); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_SAW_ERROR_STEP_LIMIT, ++ CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK, ++ (ctrl->up_error_step_limit ++ << CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT)); ++ ++ /* ++ * Enable thread aggregation regardless of which threads are ++ * enabled or disabled. ++ */ ++ cpr3_masked_write(ctrl, CPR4_REG_CPR_TIMER_CLAMP, ++ CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN, ++ CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN); ++ ++ switch (ctrl->thread_count) { ++ case 0: ++ /* Disable both threads */ ++ cpr3_masked_write(ctrl, CPR4_REG_CPR_MASK_THREAD(0), ++ CPR4_CPR_MASK_THREAD_DISABLE_THREAD ++ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK, ++ CPR4_CPR_MASK_THREAD_DISABLE_THREAD ++ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_CPR_MASK_THREAD(1), ++ CPR4_CPR_MASK_THREAD_DISABLE_THREAD ++ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK, ++ CPR4_CPR_MASK_THREAD_DISABLE_THREAD ++ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK); ++ break; ++ case 1: ++ /* Disable unused thread */ ++ thread_id = ctrl->thread[0].thread_id ? 0 : 1; ++ cpr3_masked_write(ctrl, ++ CPR4_REG_CPR_MASK_THREAD(thread_id), ++ CPR4_CPR_MASK_THREAD_DISABLE_THREAD ++ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK, ++ CPR4_CPR_MASK_THREAD_DISABLE_THREAD ++ | CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK); ++ break; ++ } ++ } ++ ++ if (!ctrl->allow_core_count_adj && !ctrl->allow_temp_adj ++ && !ctrl->allow_boost) { ++ /* ++ * Skip below configuration as none of the features ++ * are enabled. ++ */ ++ return rc; ++ } ++ ++ if (ctrl->supports_hw_closed_loop) ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_TIMER_SETTLE_VOLTAGE_EN, ++ CPR4_MARGIN_ADJ_CTL_TIMER_SETTLE_VOLTAGE_EN); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_STEP_QUOT_MASK, ++ ctrl->step_quot_fixed ++ << CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_STEP_QUOT_SHIFT); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_PER_RO_KV_MARGIN_EN, ++ (ctrl->use_dynamic_step_quot ++ ? CPR4_MARGIN_ADJ_CTL_PER_RO_KV_MARGIN_EN : 0)); ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_INITIAL_TEMP_BAND_MASK, ++ ctrl->initial_temp_band ++ << CPR4_MARGIN_ADJ_CTL_INITIAL_TEMP_BAND_SHIFT); ++ ++ rc = cpr4_regulator_init_temp_points(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "initialize temp points failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ if (ctrl->voltage_settling_time) { ++ /* ++ * Configure the settling timer used to account for ++ * one VDD supply step. ++ */ ++ temp = (u64)ctrl->cpr_clock_rate ++ * (u64)ctrl->voltage_settling_time; ++ do_div(temp, 1000000000); ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_TEMP_CORE_TIMERS, ++ CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK, ++ temp ++ << CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHIFT); ++ } ++ ++ /* ++ * Allocate memory for cpr4_sdelta structure and sdelta table for ++ * controller aggregated corner by finding the maximum core count ++ * used by any cpr3 regulators. ++ */ ++ ctrl_max_core_count = 1; ++ ctrl_valid_sdelta = false; ++ for (i = 0; i < ctrl->thread_count; i++) { ++ thread = &ctrl->thread[i]; ++ ++ /* ++ * Allocate memory for cpr4_sdelta structure and sdelta table ++ * for thread aggregated corner by finding the maximum core ++ * count used by any cpr3 regulators of the thread. ++ */ ++ thread_max_core_count = 1; ++ thread_valid_sdelta = false; ++ for (j = 0; j < thread->vreg_count; j++) { ++ vreg = &thread->vreg[j]; ++ thread_max_core_count = max(thread_max_core_count, ++ vreg->max_core_count); ++ thread_valid_sdelta |= (vreg->allow_core_count_adj ++ | vreg->allow_temp_adj ++ | vreg->allow_boost); ++ } ++ if (thread_valid_sdelta) { ++ sdelta = devm_kzalloc(ctrl->dev, sizeof(*sdelta), ++ GFP_KERNEL); ++ if (!sdelta) ++ return -ENOMEM; ++ ++ sdelta->table = devm_kcalloc(ctrl->dev, ++ thread_max_core_count ++ * ctrl->temp_band_count, ++ sizeof(*sdelta->table), ++ GFP_KERNEL); ++ if (!sdelta->table) ++ return -ENOMEM; ++ ++ sdelta->boost_table = devm_kcalloc(ctrl->dev, ++ ctrl->temp_band_count, ++ sizeof(*sdelta->boost_table), ++ GFP_KERNEL); ++ if (!sdelta->boost_table) ++ return -ENOMEM; ++ ++ thread->aggr_corner.sdelta = sdelta; ++ } ++ ++ ctrl_valid_sdelta |= thread_valid_sdelta; ++ ctrl_max_core_count = max(ctrl_max_core_count, ++ thread_max_core_count); ++ } ++ ++ if (ctrl_valid_sdelta) { ++ sdelta = devm_kzalloc(ctrl->dev, sizeof(*sdelta), GFP_KERNEL); ++ if (!sdelta) ++ return -ENOMEM; ++ ++ sdelta->table = devm_kcalloc(ctrl->dev, ctrl_max_core_count ++ * ctrl->temp_band_count, ++ sizeof(*sdelta->table), GFP_KERNEL); ++ if (!sdelta->table) ++ return -ENOMEM; ++ ++ sdelta->boost_table = devm_kcalloc(ctrl->dev, ++ ctrl->temp_band_count, ++ sizeof(*sdelta->boost_table), ++ GFP_KERNEL); ++ if (!sdelta->boost_table) ++ return -ENOMEM; ++ ++ ctrl->aggr_corner.sdelta = sdelta; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_write_temp_core_margin() - programs hardware SDELTA registers with ++ * the voltage margin adjustments that need to be applied for ++ * different online core-count and temperature bands. ++ * @ctrl: Pointer to the CPR3 controller ++ * @addr: SDELTA register address ++ * @temp_core_adj: Array of voltage margin values for different temperature ++ * bands. ++ * ++ * CPR interface/bus clocks must be enabled before calling this function. ++ * ++ * Return: none ++ */ ++static void cpr3_write_temp_core_margin(struct cpr3_controller *ctrl, ++ int addr, int *temp_core_adj) ++{ ++ int i, margin_steps; ++ u32 reg = 0; ++ ++ for (i = 0; i < ctrl->temp_band_count; i++) { ++ margin_steps = max(min(temp_core_adj[i], 127), -128); ++ reg |= (margin_steps & CPR4_MARGIN_TEMP_CORE_ADJ_MASK) << ++ (i * CPR4_MARGIN_TEMP_CORE_ADJ_SHIFT); ++ } ++ ++ cpr3_write(ctrl, addr, reg); ++ cpr3_debug(ctrl, "sdelta offset=0x%08x, val=0x%08x\n", addr, reg); ++} ++ ++/** ++ * cpr3_controller_program_sdelta() - programs hardware SDELTA registers with ++ * the voltage margin adjustments that need to be applied at ++ * different online core-count and temperature bands. Also, ++ * programs hardware register configuration for per-online-core ++ * and per-temperature based adjustments. ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * CPR interface/bus clocks must be enabled before calling this function. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_controller_program_sdelta(struct cpr3_controller *ctrl) ++{ ++ struct cpr3_corner *corner = &ctrl->aggr_corner; ++ struct cpr4_sdelta *sdelta = corner->sdelta; ++ int i, index, max_core_count, rc = 0; ++ bool cpr_enabled = ctrl->cpr_enabled; ++ ++ if (!sdelta) ++ /* cpr4_sdelta not defined for current aggregated corner */ ++ return 0; ++ ++ if (ctrl->supports_hw_closed_loop && ctrl->cpr_enabled) { ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK, ++ (ctrl->use_hw_closed_loop && !sdelta->allow_boost) ++ ? CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE : 0); ++ } ++ ++ if (!sdelta->allow_core_count_adj && !sdelta->allow_temp_adj ++ && !sdelta->allow_boost) { ++ /* ++ * Per-online-core, per-temperature and voltage boost ++ * adjustments are disabled for this aggregation corner. ++ */ ++ return 0; ++ } ++ ++ /* Ensure that CPR clocks are enabled before writing to registers. */ ++ if (!cpr_enabled) { ++ rc = cpr3_clock_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "clock enable failed, rc=%d\n", rc); ++ return rc; ++ } ++ ctrl->cpr_enabled = true; ++ } ++ ++ max_core_count = sdelta->max_core_count; ++ ++ if (sdelta->allow_core_count_adj || sdelta->allow_temp_adj) { ++ if (sdelta->allow_core_count_adj) { ++ /* Program TEMP_CORE0 to same margins as TEMP_CORE1 */ ++ cpr3_write_temp_core_margin(ctrl, ++ CPR4_REG_MARGIN_TEMP_CORE(0), ++ &sdelta->table[0]); ++ } ++ ++ for (i = 0; i < max_core_count; i++) { ++ index = i * sdelta->temp_band_count; ++ /* ++ * Program TEMP_COREi with voltage margin adjustments ++ * that need to be applied when the number of cores ++ * becomes i. ++ */ ++ cpr3_write_temp_core_margin(ctrl, ++ CPR4_REG_MARGIN_TEMP_CORE( ++ sdelta->allow_core_count_adj ++ ? i + 1 : max_core_count), ++ &sdelta->table[index]); ++ } ++ } ++ ++ if (sdelta->allow_boost) { ++ /* Program only boost_num_cores row of SDELTA */ ++ cpr3_write_temp_core_margin(ctrl, ++ CPR4_REG_MARGIN_TEMP_CORE(sdelta->boost_num_cores), ++ &sdelta->boost_table[0]); ++ } ++ ++ if (!sdelta->allow_core_count_adj && !sdelta->allow_boost) { ++ cpr3_masked_write(ctrl, CPR4_REG_MISC, ++ CPR4_MISC_MARGIN_TABLE_ROW_SELECT_MASK, ++ max_core_count ++ << CPR4_MISC_MARGIN_TABLE_ROW_SELECT_SHIFT); ++ } ++ ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_MASK ++ | CPR4_MARGIN_ADJ_CTL_CORE_ADJ_EN ++ | CPR4_MARGIN_ADJ_CTL_TEMP_ADJ_EN ++ | CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_EN ++ | CPR4_MARGIN_ADJ_CTL_BOOST_EN, ++ max_core_count << CPR4_MARGIN_ADJ_CTL_MAX_NUM_CORES_SHIFT ++ | ((sdelta->allow_core_count_adj || sdelta->allow_boost) ++ ? CPR4_MARGIN_ADJ_CTL_CORE_ADJ_EN : 0) ++ | ((sdelta->allow_temp_adj && ctrl->supports_hw_closed_loop) ++ ? CPR4_MARGIN_ADJ_CTL_TEMP_ADJ_EN : 0) ++ | (((ctrl->use_hw_closed_loop && !sdelta->allow_boost) ++ || !ctrl->supports_hw_closed_loop) ++ ? CPR4_MARGIN_ADJ_CTL_KV_MARGIN_ADJ_EN : 0) ++ | (sdelta->allow_boost ++ ? CPR4_MARGIN_ADJ_CTL_BOOST_EN : 0)); ++ ++ /* ++ * Ensure that all previous CPR register writes have completed before ++ * continuing. ++ */ ++ mb(); ++ ++ /* Turn off CPR clocks if they were off before this function call. */ ++ if (!cpr_enabled) { ++ cpr3_clock_disable(ctrl); ++ ctrl->cpr_enabled = false; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_init_ctrl() - performs hardware initialization of CPR ++ * controller registers ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_init_ctrl(struct cpr3_controller *ctrl) ++{ ++ int i, j, k, m, rc; ++ u32 ro_used = 0; ++ u32 gcnt, cont_dly, up_down_dly, val; ++ u64 temp; ++ char *mode; ++ ++ if (ctrl->core_clk) { ++ rc = clk_set_rate(ctrl->core_clk, ctrl->cpr_clock_rate); ++ if (rc) { ++ cpr3_err(ctrl, "clk_set_rate(core_clk, %u) failed, rc=%d\n", ++ ctrl->cpr_clock_rate, rc); ++ return rc; ++ } ++ } ++ ++ rc = cpr3_clock_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "clock enable failed, rc=%d\n", rc); ++ return rc; ++ } ++ ctrl->cpr_enabled = true; ++ ++ /* Find all RO's used by any corner of any regulator. */ ++ for (i = 0; i < ctrl->thread_count; i++) ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) ++ for (k = 0; k < ctrl->thread[i].vreg[j].corner_count; ++ k++) ++ for (m = 0; m < CPR3_RO_COUNT; m++) ++ if (ctrl->thread[i].vreg[j].corner[k]. ++ target_quot[m]) ++ ro_used |= BIT(m); ++ ++ /* Configure the GCNT of the RO's that will be used */ ++ gcnt = cpr3_regulator_get_gcnt(ctrl); ++ for (i = 0; i < CPR3_RO_COUNT; i++) ++ if (ro_used & BIT(i)) ++ cpr3_write(ctrl, CPR3_REG_GCNT(i), gcnt); ++ ++ /* Configure the loop delay time */ ++ temp = (u64)ctrl->cpr_clock_rate * (u64)ctrl->loop_time; ++ do_div(temp, 1000000000); ++ cont_dly = temp; ++ if (ctrl->supports_hw_closed_loop ++ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_MID_CONT, cont_dly); ++ else ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_AUTO_CONT, cont_dly); ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ temp = (u64)ctrl->cpr_clock_rate * ++ (u64)ctrl->up_down_delay_time; ++ do_div(temp, 1000000000); ++ up_down_dly = temp; ++ if (ctrl->supports_hw_closed_loop) ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_UP_DN_CONT, ++ up_down_dly); ++ cpr3_debug(ctrl, "up_down_dly=%u, up_down_delay_time=%u ns\n", ++ up_down_dly, ctrl->up_down_delay_time); ++ } ++ ++ cpr3_debug(ctrl, "cpr_clock_rate=%u HZ, sensor_time=%u ns, loop_time=%u ns, gcnt=%u, cont_dly=%u\n", ++ ctrl->cpr_clock_rate, ctrl->sensor_time, ctrl->loop_time, ++ gcnt, cont_dly); ++ ++ /* Configure CPR sensor operation */ ++ val = (ctrl->idle_clocks << CPR3_CPR_CTL_IDLE_CLOCKS_SHIFT) ++ & CPR3_CPR_CTL_IDLE_CLOCKS_MASK; ++ val |= (ctrl->count_mode << CPR3_CPR_CTL_COUNT_MODE_SHIFT) ++ & CPR3_CPR_CTL_COUNT_MODE_MASK; ++ val |= (ctrl->count_repeat << CPR3_CPR_CTL_COUNT_REPEAT_SHIFT) ++ & CPR3_CPR_CTL_COUNT_REPEAT_MASK; ++ cpr3_write(ctrl, CPR3_REG_CPR_CTL, val); ++ ++ cpr3_debug(ctrl, "idle_clocks=%u, count_mode=%u, count_repeat=%u; CPR_CTL=0x%08X\n", ++ ctrl->idle_clocks, ctrl->count_mode, ctrl->count_repeat, val); ++ ++ /* Configure CPR default step quotients */ ++ val = (ctrl->step_quot_init_min << CPR3_CPR_STEP_QUOT_MIN_SHIFT) ++ & CPR3_CPR_STEP_QUOT_MIN_MASK; ++ val |= (ctrl->step_quot_init_max << CPR3_CPR_STEP_QUOT_MAX_SHIFT) ++ & CPR3_CPR_STEP_QUOT_MAX_MASK; ++ cpr3_write(ctrl, CPR3_REG_CPR_STEP_QUOT, val); ++ ++ cpr3_debug(ctrl, "step_quot_min=%u, step_quot_max=%u; STEP_QUOT=0x%08X\n", ++ ctrl->step_quot_init_min, ctrl->step_quot_init_max, val); ++ ++ /* Configure the CPR sensor ownership */ ++ for (i = 0; i < ctrl->sensor_count; i++) ++ cpr3_write(ctrl, CPR3_REG_SENSOR_OWNER(i), ++ ctrl->sensor_owner[i]); ++ ++ /* Configure per-thread registers */ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ rc = cpr3_regulator_init_thread(&ctrl->thread[i]); ++ if (rc) { ++ cpr3_err(ctrl, "CPR thread register initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ if (ctrl->supports_hw_closed_loop) { ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK, ++ ctrl->use_hw_closed_loop ++ ? CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE ++ : CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE); ++ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ cpr3_write(ctrl, CPR3_REG_HW_CLOSED_LOOP, ++ ctrl->use_hw_closed_loop ++ ? CPR3_HW_CLOSED_LOOP_ENABLE ++ : CPR3_HW_CLOSED_LOOP_DISABLE); ++ ++ cpr3_debug(ctrl, "PD_THROTTLE=0x%08X\n", ++ ctrl->proc_clock_throttle); ++ } ++ ++ if ((ctrl->use_hw_closed_loop || ++ ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) && ++ ctrl->vdd_limit_regulator) { ++ rc = regulator_enable(ctrl->vdd_limit_regulator); ++ if (rc) { ++ cpr3_err(ctrl, "CPR limit regulator enable failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ } ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_regulator_init_cpr4(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "CPR4-specific controller initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ /* Ensure that all register writes complete before disabling clocks. */ ++ wmb(); ++ ++ cpr3_clock_disable(ctrl); ++ ctrl->cpr_enabled = false; ++ ++ if (!ctrl->cpr_allowed_sw || !ctrl->cpr_allowed_hw) ++ mode = "open-loop"; ++ else if (ctrl->supports_hw_closed_loop) ++ mode = ctrl->use_hw_closed_loop ++ ? "HW closed-loop" : "SW closed-loop"; ++ else ++ mode = "closed-loop"; ++ ++ cpr3_info(ctrl, "Default CPR mode = %s", mode); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_set_target_quot() - configure the target quotient for each ++ * RO of the CPR3 thread and set the RO mask ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_set_target_quot(struct cpr3_thread *thread) ++{ ++ u32 new_quot, last_quot; ++ int i; ++ ++ if (thread->aggr_corner.ro_mask == CPR3_RO_MASK ++ && thread->last_closed_loop_aggr_corner.ro_mask == CPR3_RO_MASK) { ++ /* Avoid writing target quotients since all RO's are masked. */ ++ return; ++ } else if (thread->aggr_corner.ro_mask == CPR3_RO_MASK) { ++ cpr3_write(thread->ctrl, CPR3_REG_RO_MASK(thread->thread_id), ++ CPR3_RO_MASK); ++ thread->last_closed_loop_aggr_corner.ro_mask = CPR3_RO_MASK; ++ /* ++ * Only the RO_MASK register needs to be written since all ++ * RO's are masked. ++ */ ++ return; ++ } else if (thread->aggr_corner.ro_mask ++ != thread->last_closed_loop_aggr_corner.ro_mask) { ++ cpr3_write(thread->ctrl, CPR3_REG_RO_MASK(thread->thread_id), ++ thread->aggr_corner.ro_mask); ++ } ++ ++ for (i = 0; i < CPR3_RO_COUNT; i++) { ++ new_quot = thread->aggr_corner.target_quot[i]; ++ last_quot = thread->last_closed_loop_aggr_corner.target_quot[i]; ++ if (new_quot != last_quot) ++ cpr3_write(thread->ctrl, ++ CPR3_REG_TARGET_QUOT(thread->thread_id, i), ++ new_quot); ++ } ++ ++ thread->last_closed_loop_aggr_corner = thread->aggr_corner; ++ ++ return; ++} ++ ++/** ++ * cpr3_update_vreg_closed_loop_volt() - update the last known settled ++ * closed loop voltage for a CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * @vdd_volt: Last known settled voltage in microvolts for the ++ * VDD supply ++ * @reg_last_measurement: Value read from the LAST_MEASUREMENT register ++ * ++ * Return: none ++ */ ++static void cpr3_update_vreg_closed_loop_volt(struct cpr3_regulator *vreg, ++ int vdd_volt, u32 reg_last_measurement) ++{ ++ bool step_dn, step_up, aggr_step_up, aggr_step_dn, aggr_step_mid; ++ bool valid, pd_valid, saw_error; ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ struct cpr3_corner *corner; ++ u32 id; ++ ++ if (vreg->last_closed_loop_corner == CPR3_REGULATOR_CORNER_INVALID) ++ return; ++ else ++ corner = &vreg->corner[vreg->last_closed_loop_corner]; ++ ++ if (vreg->thread->last_closed_loop_aggr_corner.ro_mask ++ == CPR3_RO_MASK || !vreg->aggregated) { ++ return; ++ } else if (!ctrl->cpr_enabled || !ctrl->last_corner_was_closed_loop) { ++ return; ++ } else if (ctrl->thread_count == 1 ++ && vdd_volt >= corner->floor_volt ++ && vdd_volt <= corner->ceiling_volt) { ++ corner->last_volt = vdd_volt; ++ cpr3_debug(vreg, "last_volt updated: last_volt[%d]=%d, ceiling_volt[%d]=%d, floor_volt[%d]=%d\n", ++ vreg->last_closed_loop_corner, corner->last_volt, ++ vreg->last_closed_loop_corner, ++ corner->ceiling_volt, ++ vreg->last_closed_loop_corner, ++ corner->floor_volt); ++ return; ++ } else if (!ctrl->supports_hw_closed_loop) { ++ return; ++ } else if (ctrl->ctrl_type != CPR_CTRL_TYPE_CPR3) { ++ corner->last_volt = vdd_volt; ++ cpr3_debug(vreg, "last_volt updated: last_volt[%d]=%d, ceiling_volt[%d]=%d, floor_volt[%d]=%d\n", ++ vreg->last_closed_loop_corner, corner->last_volt, ++ vreg->last_closed_loop_corner, ++ corner->ceiling_volt, ++ vreg->last_closed_loop_corner, ++ corner->floor_volt); ++ return; ++ } ++ ++ /* CPR clocks are on and HW closed loop is supported */ ++ valid = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_VALID); ++ if (!valid) { ++ cpr3_debug(vreg, "CPR_LAST_VALID_MEASUREMENT=0x%X valid bit not set\n", ++ reg_last_measurement); ++ return; ++ } ++ ++ id = vreg->thread->thread_id; ++ ++ step_dn ++ = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_THREAD_DN(id)); ++ step_up ++ = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_THREAD_UP(id)); ++ aggr_step_dn = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_AGGR_DN); ++ aggr_step_mid ++ = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_AGGR_MID); ++ aggr_step_up = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_AGGR_UP); ++ saw_error = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_SAW_ERROR); ++ pd_valid ++ = !((((reg_last_measurement & CPR3_LAST_MEASUREMENT_PD_BYPASS_MASK) ++ >> CPR3_LAST_MEASUREMENT_PD_BYPASS_SHIFT) ++ & vreg->pd_bypass_mask) == vreg->pd_bypass_mask); ++ ++ if (!pd_valid) { ++ cpr3_debug(vreg, "CPR_LAST_VALID_MEASUREMENT=0x%X, all power domains bypassed\n", ++ reg_last_measurement); ++ return; ++ } else if (step_dn && step_up) { ++ cpr3_err(vreg, "both up and down status bits set, CPR_LAST_VALID_MEASUREMENT=0x%X\n", ++ reg_last_measurement); ++ return; ++ } else if (aggr_step_dn && step_dn && vdd_volt < corner->last_volt ++ && vdd_volt >= corner->floor_volt) { ++ corner->last_volt = vdd_volt; ++ } else if (aggr_step_up && step_up && vdd_volt > corner->last_volt ++ && vdd_volt <= corner->ceiling_volt) { ++ corner->last_volt = vdd_volt; ++ } else if (aggr_step_mid ++ && vdd_volt >= corner->floor_volt ++ && vdd_volt <= corner->ceiling_volt) { ++ corner->last_volt = vdd_volt; ++ } else if (saw_error && (vdd_volt == corner->ceiling_volt ++ || vdd_volt == corner->floor_volt)) { ++ corner->last_volt = vdd_volt; ++ } else { ++ cpr3_debug(vreg, "last_volt not updated: last_volt[%d]=%d, ceiling_volt[%d]=%d, floor_volt[%d]=%d, vdd_volt=%d, CPR_LAST_VALID_MEASUREMENT=0x%X\n", ++ vreg->last_closed_loop_corner, corner->last_volt, ++ vreg->last_closed_loop_corner, ++ corner->ceiling_volt, ++ vreg->last_closed_loop_corner, corner->floor_volt, ++ vdd_volt, reg_last_measurement); ++ return; ++ } ++ ++ cpr3_debug(vreg, "last_volt updated: last_volt[%d]=%d, ceiling_volt[%d]=%d, floor_volt[%d]=%d, CPR_LAST_VALID_MEASUREMENT=0x%X\n", ++ vreg->last_closed_loop_corner, corner->last_volt, ++ vreg->last_closed_loop_corner, corner->ceiling_volt, ++ vreg->last_closed_loop_corner, corner->floor_volt, ++ reg_last_measurement); ++} ++ ++/** ++ * cpr3_regulator_mem_acc_bhs_used() - determines if mem-acc regulators powered ++ * through a BHS are associated with the CPR3 controller or any of ++ * the CPR3 regulators it controls. ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * This function determines if the CPR3 controller or any of its CPR3 regulators ++ * need to manage mem-acc regulators that are currently powered through a BHS ++ * and whose corner selection is based upon a particular voltage threshold. ++ * ++ * Return: true or false ++ */ ++static bool cpr3_regulator_mem_acc_bhs_used(struct cpr3_controller *ctrl) ++{ ++ struct cpr3_regulator *vreg; ++ int i, j; ++ ++ if (!ctrl->mem_acc_threshold_volt) ++ return false; ++ ++ if (ctrl->mem_acc_regulator) ++ return true; ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ ++ if (vreg->mem_acc_regulator) ++ return true; ++ } ++ } ++ ++ return false; ++} ++ ++/** ++ * cpr3_regulator_config_bhs_mem_acc() - configure the mem-acc regulator ++ * settings for hardware blocks currently powered through the BHS. ++ * @ctrl: Pointer to the CPR3 controller ++ * @new_volt: New voltage in microvolts that VDD supply needs to ++ * end up at ++ * @last_volt: Pointer to the last known voltage in microvolts for the ++ * VDD supply ++ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max ++ * corner aggregated from all CPR3 threads managed by the ++ * CPR3 controller ++ * ++ * This function programs the mem-acc regulator corners for CPR3 regulators ++ * whose LDO regulators are in bypassed state. The function also handles ++ * CPR3 controllers which utilize mem-acc regulators that operate independently ++ * from the LDO hardware and that must be programmed when the VDD supply ++ * crosses a particular voltage threshold. ++ * ++ * Return: 0 on success, errno on failure. If the VDD supply voltage is ++ * modified, last_volt is updated to reflect the new voltage setpoint. ++ */ ++static int cpr3_regulator_config_bhs_mem_acc(struct cpr3_controller *ctrl, ++ int new_volt, int *last_volt, ++ struct cpr3_corner *aggr_corner) ++{ ++ struct cpr3_regulator *vreg; ++ int i, j, rc, mem_acc_corn, safe_volt; ++ int mem_acc_volt = ctrl->mem_acc_threshold_volt; ++ int ref_volt; ++ ++ if (!cpr3_regulator_mem_acc_bhs_used(ctrl)) ++ return 0; ++ ++ ref_volt = ctrl->use_hw_closed_loop ? aggr_corner->floor_volt : ++ new_volt; ++ ++ if (((*last_volt < mem_acc_volt && mem_acc_volt <= ref_volt) || ++ (*last_volt >= mem_acc_volt && mem_acc_volt > ref_volt))) { ++ if (ref_volt < *last_volt) ++ safe_volt = max(mem_acc_volt, aggr_corner->last_volt); ++ else ++ safe_volt = max(mem_acc_volt, *last_volt); ++ ++ rc = regulator_set_voltage(ctrl->vdd_regulator, safe_volt, ++ new_volt < *last_volt ? ++ ctrl->aggr_corner.ceiling_volt : ++ new_volt); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(vdd) == %d failed, rc=%d\n", ++ safe_volt, rc); ++ return rc; ++ } ++ ++ *last_volt = safe_volt; ++ ++ mem_acc_corn = ref_volt < mem_acc_volt ? ++ ctrl->mem_acc_corner_map[CPR3_MEM_ACC_LOW_CORNER] : ++ ctrl->mem_acc_corner_map[CPR3_MEM_ACC_HIGH_CORNER]; ++ ++ if (ctrl->mem_acc_regulator) { ++ rc = regulator_set_voltage(ctrl->mem_acc_regulator, ++ mem_acc_corn, mem_acc_corn); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(mem_acc) == %d failed, rc=%d\n", ++ mem_acc_corn, rc); ++ return rc; ++ } ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ ++ if (!vreg->mem_acc_regulator) ++ continue; ++ ++ rc = regulator_set_voltage( ++ vreg->mem_acc_regulator, mem_acc_corn, ++ mem_acc_corn); ++ if (rc) { ++ cpr3_err(vreg, "regulator_set_voltage(mem_acc) == %d failed, rc=%d\n", ++ mem_acc_corn, rc); ++ return rc; ++ } ++ } ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_switch_apm_mode() - switch the mode of the APM controller ++ * associated with a given CPR3 controller ++ * @ctrl: Pointer to the CPR3 controller ++ * @new_volt: New voltage in microvolts that VDD supply needs to ++ * end up at ++ * @last_volt: Pointer to the last known voltage in microvolts for the ++ * VDD supply ++ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max ++ * corner aggregated from all CPR3 threads managed by the ++ * CPR3 controller ++ * ++ * This function requests a switch of the APM mode while guaranteeing ++ * any LDO regulator hardware requirements are satisfied. The function must ++ * be called once it is known a new VDD supply setpoint crosses the APM ++ * voltage threshold. ++ * ++ * Return: 0 on success, errno on failure. If the VDD supply voltage is ++ * modified, last_volt is updated to reflect the new voltage setpoint. ++ */ ++static int cpr3_regulator_switch_apm_mode(struct cpr3_controller *ctrl, ++ int new_volt, int *last_volt, ++ struct cpr3_corner *aggr_corner) ++{ ++ struct regulator *vdd = ctrl->vdd_regulator; ++ int apm_volt = ctrl->apm_threshold_volt; ++ int orig_last_volt = *last_volt; ++ int rc; ++ ++ rc = regulator_set_voltage(vdd, apm_volt, apm_volt); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(vdd) == %d failed, rc=%d\n", ++ apm_volt, rc); ++ return rc; ++ } ++ ++ *last_volt = apm_volt; ++ ++ rc = msm_apm_set_supply(ctrl->apm, new_volt >= apm_volt ++ ? ctrl->apm_high_supply : ctrl->apm_low_supply); ++ if (rc) { ++ cpr3_err(ctrl, "APM switch failed, rc=%d\n", rc); ++ /* Roll back the voltage. */ ++ regulator_set_voltage(vdd, orig_last_volt, INT_MAX); ++ *last_volt = orig_last_volt; ++ return rc; ++ } ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_config_voltage_crossings() - configure APM and mem-acc ++ * settings depending upon a new VDD supply setpoint ++ * ++ * @ctrl: Pointer to the CPR3 controller ++ * @new_volt: New voltage in microvolts that VDD supply needs to ++ * end up at ++ * @last_volt: Pointer to the last known voltage in microvolts for the ++ * VDD supply ++ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max ++ * corner aggregated from all CPR3 threads managed by the ++ * CPR3 controller ++ * ++ * This function handles the APM and mem-acc regulator reconfiguration if ++ * the new VDD supply voltage will result in crossing their respective voltage ++ * thresholds. ++ * ++ * Return: 0 on success, errno on failure. If the VDD supply voltage is ++ * modified, last_volt is updated to reflect the new voltage setpoint. ++ */ ++static int cpr3_regulator_config_voltage_crossings(struct cpr3_controller *ctrl, ++ int new_volt, int *last_volt, ++ struct cpr3_corner *aggr_corner) ++{ ++ bool apm_crossing = false, mem_acc_crossing = false; ++ bool mem_acc_bhs_used; ++ int apm_volt = ctrl->apm_threshold_volt; ++ int mem_acc_volt = ctrl->mem_acc_threshold_volt; ++ int ref_volt, rc; ++ ++ if (ctrl->apm && apm_volt > 0 ++ && ((*last_volt < apm_volt && apm_volt <= new_volt) ++ || (*last_volt >= apm_volt && apm_volt > new_volt))) ++ apm_crossing = true; ++ ++ mem_acc_bhs_used = cpr3_regulator_mem_acc_bhs_used(ctrl); ++ ++ ref_volt = ctrl->use_hw_closed_loop ? aggr_corner->floor_volt : ++ new_volt; ++ ++ if (mem_acc_bhs_used && ++ (((*last_volt < mem_acc_volt && mem_acc_volt <= ref_volt) || ++ (*last_volt >= mem_acc_volt && mem_acc_volt > ref_volt)))) ++ mem_acc_crossing = true; ++ ++ if (apm_crossing && mem_acc_crossing) { ++ if ((new_volt < *last_volt && apm_volt >= mem_acc_volt) || ++ (new_volt >= *last_volt && apm_volt < mem_acc_volt)) { ++ rc = cpr3_regulator_switch_apm_mode(ctrl, new_volt, ++ last_volt, ++ aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to switch APM mode\n"); ++ return rc; ++ } ++ ++ rc = cpr3_regulator_config_bhs_mem_acc(ctrl, new_volt, ++ last_volt, aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to configure BHS mem-acc settings\n"); ++ return rc; ++ } ++ } else { ++ rc = cpr3_regulator_config_bhs_mem_acc(ctrl, new_volt, ++ last_volt, aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to configure BHS mem-acc settings\n"); ++ return rc; ++ } ++ ++ rc = cpr3_regulator_switch_apm_mode(ctrl, new_volt, ++ last_volt, ++ aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to switch APM mode\n"); ++ return rc; ++ } ++ } ++ } else if (apm_crossing) { ++ rc = cpr3_regulator_switch_apm_mode(ctrl, new_volt, last_volt, ++ aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to switch APM mode\n"); ++ return rc; ++ } ++ } else if (mem_acc_crossing) { ++ rc = cpr3_regulator_config_bhs_mem_acc(ctrl, new_volt, ++ last_volt, aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to configure BHS mem-acc settings\n"); ++ return rc; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_config_mem_acc() - configure the corner of the mem-acc ++ * regulator associated with the CPR3 controller ++ * @ctrl: Pointer to the CPR3 controller ++ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max ++ * corner aggregated from all CPR3 threads managed by the ++ * CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_config_mem_acc(struct cpr3_controller *ctrl, ++ struct cpr3_corner *aggr_corner) ++{ ++ int rc; ++ ++ if (ctrl->mem_acc_regulator && aggr_corner->mem_acc_volt) { ++ rc = regulator_set_voltage(ctrl->mem_acc_regulator, ++ aggr_corner->mem_acc_volt, ++ aggr_corner->mem_acc_volt); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(mem_acc) == %d failed, rc=%d\n", ++ aggr_corner->mem_acc_volt, rc); ++ return rc; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_scale_vdd_voltage() - scale the CPR controlled VDD supply ++ * voltage to the new level while satisfying any other hardware ++ * requirements ++ * @ctrl: Pointer to the CPR3 controller ++ * @new_volt: New voltage in microvolts that VDD supply needs to end ++ * up at ++ * @last_volt: Last known voltage in microvolts for the VDD supply ++ * @aggr_corner: Pointer to the CPR3 corner which corresponds to the max ++ * corner aggregated from all CPR3 threads managed by the ++ * CPR3 controller ++ * ++ * This function scales the CPR controlled VDD supply voltage from its ++ * current level to the new voltage that is specified. If the supply is ++ * configured to use the APM and the APM threshold is crossed as a result of ++ * the voltage scaling, then this function also stops at the APM threshold, ++ * switches the APM source, and finally sets the final new voltage. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_scale_vdd_voltage(struct cpr3_controller *ctrl, ++ int new_volt, int last_volt, ++ struct cpr3_corner *aggr_corner) ++{ ++ struct regulator *vdd = ctrl->vdd_regulator; ++ int rc; ++ ++ if (new_volt < last_volt) { ++ rc = cpr3_regulator_config_mem_acc(ctrl, aggr_corner); ++ if (rc) ++ return rc; ++ } else { ++ /* Increasing VDD voltage */ ++ if (ctrl->system_regulator) { ++ rc = regulator_set_voltage(ctrl->system_regulator, ++ aggr_corner->system_volt, INT_MAX); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(system) == %d failed, rc=%d\n", ++ aggr_corner->system_volt, rc); ++ return rc; ++ } ++ } ++ } ++ ++ rc = cpr3_regulator_config_voltage_crossings(ctrl, new_volt, &last_volt, ++ aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "unable to handle voltage threshold crossing configurations, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ /* ++ * Subtract a small amount from the min_uV parameter so that the ++ * set voltage request is not dropped by the framework due to being ++ * duplicate. This is needed in order to switch from hardware ++ * closed-loop to open-loop successfully. ++ */ ++ rc = regulator_set_voltage(vdd, new_volt - (ctrl->cpr_enabled ? 0 : 1), ++ aggr_corner->ceiling_volt); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(vdd) == %d failed, rc=%d\n", ++ new_volt, rc); ++ return rc; ++ } ++ ++ if (new_volt == last_volt && ctrl->supports_hw_closed_loop ++ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ /* ++ * CPR4 features enforce voltage reprogramming when the last ++ * set voltage and new set voltage are same. This way, we can ++ * ensure that SAW PMIC STATUS register is updated with newly ++ * programmed voltage. ++ */ ++ rc = regulator_sync_voltage(vdd); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_sync_voltage(vdd) == %d failed, rc=%d\n", ++ new_volt, rc); ++ return rc; ++ } ++ } ++ ++ if (new_volt >= last_volt) { ++ rc = cpr3_regulator_config_mem_acc(ctrl, aggr_corner); ++ if (rc) ++ return rc; ++ } else { ++ /* Decreasing VDD voltage */ ++ if (ctrl->system_regulator) { ++ rc = regulator_set_voltage(ctrl->system_regulator, ++ aggr_corner->system_volt, INT_MAX); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_set_voltage(system) == %d failed, rc=%d\n", ++ aggr_corner->system_volt, rc); ++ return rc; ++ } ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_get_dynamic_floor_volt() - returns the current dynamic floor ++ * voltage based upon static configurations and the state of all ++ * power domains during the last CPR measurement ++ * @ctrl: Pointer to the CPR3 controller ++ * @reg_last_measurement: Value read from the LAST_MEASUREMENT register ++ * ++ * When using HW closed-loop, the dynamic floor voltage is always returned ++ * regardless of the current state of the power domains. ++ * ++ * Return: dynamic floor voltage in microvolts or 0 if dynamic floor is not ++ * currently required ++ */ ++static int cpr3_regulator_get_dynamic_floor_volt(struct cpr3_controller *ctrl, ++ u32 reg_last_measurement) ++{ ++ int dynamic_floor_volt = 0; ++ struct cpr3_regulator *vreg; ++ bool valid, pd_valid; ++ u32 bypass_bits; ++ int i, j; ++ ++ if (!ctrl->supports_hw_closed_loop) ++ return 0; ++ ++ if (likely(!ctrl->use_hw_closed_loop)) { ++ valid = !!(reg_last_measurement & CPR3_LAST_MEASUREMENT_VALID); ++ bypass_bits ++ = (reg_last_measurement & CPR3_LAST_MEASUREMENT_PD_BYPASS_MASK) ++ >> CPR3_LAST_MEASUREMENT_PD_BYPASS_SHIFT; ++ } else { ++ /* ++ * Ensure that the dynamic floor voltage is always used for ++ * HW closed-loop since the conditions below cannot be evaluated ++ * after each CPR measurement. ++ */ ++ valid = false; ++ bypass_bits = 0; ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ ++ if (!vreg->uses_dynamic_floor) ++ continue; ++ ++ pd_valid = !((bypass_bits & vreg->pd_bypass_mask) ++ == vreg->pd_bypass_mask); ++ ++ if (!valid || !pd_valid) ++ dynamic_floor_volt = max(dynamic_floor_volt, ++ vreg->corner[ ++ vreg->dynamic_floor_corner].last_volt); ++ } ++ } ++ ++ return dynamic_floor_volt; ++} ++ ++/** ++ * cpr3_regulator_max_sdelta_diff() - returns the maximum voltage difference in ++ * microvolts that can result from different operating conditions ++ * for the specified sdelta struct ++ * @sdelta: Pointer to the sdelta structure ++ * @step_volt: Step size in microvolts between available set ++ * points of the VDD supply. ++ * ++ * Return: voltage difference between the highest and lowest adjustments if ++ * sdelta and sdelta->table are valid, else 0. ++ */ ++static int cpr3_regulator_max_sdelta_diff(const struct cpr4_sdelta *sdelta, ++ int step_volt) ++{ ++ int i, j, index, sdelta_min = INT_MAX, sdelta_max = INT_MIN; ++ ++ if (!sdelta || !sdelta->table) ++ return 0; ++ ++ for (i = 0; i < sdelta->max_core_count; i++) { ++ for (j = 0; j < sdelta->temp_band_count; j++) { ++ index = i * sdelta->temp_band_count + j; ++ sdelta_min = min(sdelta_min, sdelta->table[index]); ++ sdelta_max = max(sdelta_max, sdelta->table[index]); ++ } ++ } ++ ++ return (sdelta_max - sdelta_min) * step_volt; ++} ++ ++/** ++ * cpr3_regulator_aggregate_sdelta() - check open-loop voltages of current ++ * aggregated corner and current corner of a given regulator ++ * and adjust the sdelta strucuture data of aggregate corner. ++ * @aggr_corner: Pointer to accumulated aggregated corner which ++ * is both an input and an output ++ * @corner: Pointer to the corner to be aggregated with ++ * aggr_corner ++ * @step_volt: Step size in microvolts between available set ++ * points of the VDD supply. ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_aggregate_sdelta( ++ struct cpr3_corner *aggr_corner, ++ const struct cpr3_corner *corner, int step_volt) ++{ ++ struct cpr4_sdelta *aggr_sdelta, *sdelta; ++ int aggr_core_count, core_count, temp_band_count; ++ u32 aggr_index, index; ++ int i, j, sdelta_size, cap_steps, adjust_sdelta; ++ ++ aggr_sdelta = aggr_corner->sdelta; ++ sdelta = corner->sdelta; ++ ++ if (aggr_corner->open_loop_volt < corner->open_loop_volt) { ++ /* ++ * Found the new dominant regulator as its open-loop requirement ++ * is higher than previous dominant regulator. Calculate cap ++ * voltage to limit the SDELTA values to make sure the runtime ++ * (Core-count/temp) adjustments do not violate other ++ * regulators' voltage requirements. Use cpr4_sdelta values of ++ * new dominant regulator. ++ */ ++ aggr_sdelta->cap_volt = min(aggr_sdelta->cap_volt, ++ (corner->open_loop_volt - ++ aggr_corner->open_loop_volt)); ++ ++ /* Clear old data in the sdelta table */ ++ sdelta_size = aggr_sdelta->max_core_count ++ * aggr_sdelta->temp_band_count; ++ ++ if (aggr_sdelta->allow_core_count_adj ++ || aggr_sdelta->allow_temp_adj) ++ memset(aggr_sdelta->table, 0, sdelta_size ++ * sizeof(*aggr_sdelta->table)); ++ ++ if (sdelta->allow_temp_adj || sdelta->allow_core_count_adj) { ++ /* Copy new data in sdelta table */ ++ sdelta_size = sdelta->max_core_count ++ * sdelta->temp_band_count; ++ if (sdelta->table) ++ memcpy(aggr_sdelta->table, sdelta->table, ++ sdelta_size * sizeof(*sdelta->table)); ++ } ++ ++ if (sdelta->allow_boost) { ++ memcpy(aggr_sdelta->boost_table, sdelta->boost_table, ++ sdelta->temp_band_count ++ * sizeof(*sdelta->boost_table)); ++ aggr_sdelta->boost_num_cores = sdelta->boost_num_cores; ++ } else if (aggr_sdelta->allow_boost) { ++ for (i = 0; i < aggr_sdelta->temp_band_count; i++) { ++ adjust_sdelta = (corner->open_loop_volt ++ - aggr_corner->open_loop_volt) ++ / step_volt; ++ aggr_sdelta->boost_table[i] += adjust_sdelta; ++ aggr_sdelta->boost_table[i] ++ = min(aggr_sdelta->boost_table[i], 0); ++ } ++ } ++ ++ aggr_corner->open_loop_volt = corner->open_loop_volt; ++ aggr_sdelta->allow_temp_adj = sdelta->allow_temp_adj; ++ aggr_sdelta->allow_core_count_adj ++ = sdelta->allow_core_count_adj; ++ aggr_sdelta->max_core_count = sdelta->max_core_count; ++ aggr_sdelta->temp_band_count = sdelta->temp_band_count; ++ } else if (aggr_corner->open_loop_volt > corner->open_loop_volt) { ++ /* ++ * Adjust the cap voltage if the open-loop requirement of new ++ * regulator is the next highest. ++ */ ++ aggr_sdelta->cap_volt = min(aggr_sdelta->cap_volt, ++ (aggr_corner->open_loop_volt ++ - corner->open_loop_volt)); ++ ++ if (sdelta->allow_boost) { ++ for (i = 0; i < aggr_sdelta->temp_band_count; i++) { ++ adjust_sdelta = (aggr_corner->open_loop_volt ++ - corner->open_loop_volt) ++ / step_volt; ++ aggr_sdelta->boost_table[i] = ++ sdelta->boost_table[i] + adjust_sdelta; ++ aggr_sdelta->boost_table[i] ++ = min(aggr_sdelta->boost_table[i], 0); ++ } ++ aggr_sdelta->boost_num_cores = sdelta->boost_num_cores; ++ } ++ } else { ++ /* ++ * Found another dominant regulator with same open-loop ++ * requirement. Make cap voltage to '0'. Disable core-count ++ * adjustments as we couldn't support for both regulators. ++ * Keep enable temp based adjustments if enabled for both ++ * regulators and choose mininum margin adjustment values ++ * between them. ++ */ ++ aggr_sdelta->cap_volt = 0; ++ aggr_sdelta->allow_core_count_adj = false; ++ ++ if (aggr_sdelta->allow_temp_adj ++ && sdelta->allow_temp_adj) { ++ aggr_core_count = aggr_sdelta->max_core_count - 1; ++ core_count = sdelta->max_core_count - 1; ++ temp_band_count = sdelta->temp_band_count; ++ for (j = 0; j < temp_band_count; j++) { ++ aggr_index = aggr_core_count * temp_band_count ++ + j; ++ index = core_count * temp_band_count + j; ++ aggr_sdelta->table[aggr_index] = ++ min(aggr_sdelta->table[aggr_index], ++ sdelta->table[index]); ++ } ++ } else { ++ aggr_sdelta->allow_temp_adj = false; ++ } ++ ++ if (sdelta->allow_boost) { ++ memcpy(aggr_sdelta->boost_table, sdelta->boost_table, ++ sdelta->temp_band_count ++ * sizeof(*sdelta->boost_table)); ++ aggr_sdelta->boost_num_cores = sdelta->boost_num_cores; ++ } ++ } ++ ++ /* Keep non-dominant clients boost enable state */ ++ aggr_sdelta->allow_boost |= sdelta->allow_boost; ++ if (aggr_sdelta->allow_boost) ++ aggr_sdelta->allow_core_count_adj = false; ++ ++ if (aggr_sdelta->cap_volt && !(aggr_sdelta->cap_volt == INT_MAX)) { ++ core_count = aggr_sdelta->max_core_count; ++ temp_band_count = aggr_sdelta->temp_band_count; ++ /* ++ * Convert cap voltage from uV to PMIC steps and use to limit ++ * sdelta margin adjustments. ++ */ ++ cap_steps = aggr_sdelta->cap_volt / step_volt; ++ for (i = 0; i < core_count; i++) ++ for (j = 0; j < temp_band_count; j++) { ++ index = i * temp_band_count + j; ++ aggr_sdelta->table[index] = ++ min(aggr_sdelta->table[index], ++ cap_steps); ++ } ++ } ++} ++ ++/** ++ * cpr3_regulator_aggregate_corners() - aggregate two corners together ++ * @aggr_corner: Pointer to accumulated aggregated corner which ++ * is both an input and an output ++ * @corner: Pointer to the corner to be aggregated with ++ * aggr_corner ++ * @aggr_quot: Flag indicating that target quotients should be ++ * aggregated as well. ++ * @step_volt: Step size in microvolts between available set ++ * points of the VDD supply. ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_aggregate_corners(struct cpr3_corner *aggr_corner, ++ const struct cpr3_corner *corner, bool aggr_quot, ++ int step_volt) ++{ ++ int i; ++ ++ aggr_corner->ceiling_volt ++ = max(aggr_corner->ceiling_volt, corner->ceiling_volt); ++ aggr_corner->floor_volt ++ = max(aggr_corner->floor_volt, corner->floor_volt); ++ aggr_corner->last_volt ++ = max(aggr_corner->last_volt, corner->last_volt); ++ aggr_corner->system_volt ++ = max(aggr_corner->system_volt, corner->system_volt); ++ aggr_corner->mem_acc_volt ++ = max(aggr_corner->mem_acc_volt, corner->mem_acc_volt); ++ aggr_corner->irq_en |= corner->irq_en; ++ aggr_corner->use_open_loop |= corner->use_open_loop; ++ ++ if (aggr_quot) { ++ aggr_corner->ro_mask &= corner->ro_mask; ++ ++ for (i = 0; i < CPR3_RO_COUNT; i++) ++ aggr_corner->target_quot[i] ++ = max(aggr_corner->target_quot[i], ++ corner->target_quot[i]); ++ } ++ ++ if (aggr_corner->sdelta && corner->sdelta ++ && (aggr_corner->sdelta->table ++ || aggr_corner->sdelta->boost_table)) { ++ cpr3_regulator_aggregate_sdelta(aggr_corner, corner, step_volt); ++ } else { ++ aggr_corner->open_loop_volt ++ = max(aggr_corner->open_loop_volt, ++ corner->open_loop_volt); ++ } ++} ++ ++/** ++ * cpr3_regulator_update_ctrl_state() - update the state of the CPR controller ++ * to reflect the corners used by all CPR3 regulators as well as ++ * the CPR operating mode ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * This function aggregates the CPR parameters for all CPR3 regulators ++ * associated with the VDD supply. Upon success, it sets the aggregated last ++ * known good voltage. ++ * ++ * The VDD supply voltage will not be physically configured unless this ++ * condition is met by at least one of the regulators of the controller: ++ * regulator->vreg_enabled == true && ++ * regulator->current_corner != CPR3_REGULATOR_CORNER_INVALID ++ * ++ * CPR registers for the controller and each thread are updated as long as ++ * ctrl->cpr_enabled == true. ++ * ++ * Note, CPR3 controller lock must be held by the caller. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int _cpr3_regulator_update_ctrl_state(struct cpr3_controller *ctrl) ++{ ++ struct cpr3_corner aggr_corner = {}; ++ struct cpr3_thread *thread; ++ struct cpr3_regulator *vreg; ++ struct cpr4_sdelta *sdelta; ++ bool valid = false; ++ bool thread_valid; ++ int i, j, rc, new_volt, vdd_volt, dynamic_floor_volt, last_corner_volt; ++ u32 reg_last_measurement = 0, sdelta_size; ++ int *sdelta_table, *boost_table; ++ ++ last_corner_volt = 0; ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ vdd_volt = regulator_get_voltage(ctrl->vdd_regulator); ++ if (vdd_volt < 0) { ++ cpr3_err(ctrl, "regulator_get_voltage(vdd) failed, rc=%d\n", ++ vdd_volt); ++ return vdd_volt; ++ } ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ /* ++ * Save aggregated corner open-loop voltage which was programmed ++ * during last corner switch which is used when programming new ++ * aggregated corner open-loop voltage. ++ */ ++ last_corner_volt = ctrl->aggr_corner.open_loop_volt; ++ } ++ ++ if (ctrl->cpr_enabled && ctrl->use_hw_closed_loop && ++ ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) ++ reg_last_measurement ++ = cpr3_read(ctrl, CPR3_REG_LAST_MEASUREMENT); ++ ++ aggr_corner.sdelta = ctrl->aggr_corner.sdelta; ++ if (aggr_corner.sdelta) { ++ sdelta = aggr_corner.sdelta; ++ sdelta_table = sdelta->table; ++ if (sdelta_table) { ++ sdelta_size = sdelta->max_core_count * ++ sdelta->temp_band_count; ++ memset(sdelta_table, 0, sdelta_size ++ * sizeof(*sdelta_table)); ++ } ++ ++ boost_table = sdelta->boost_table; ++ if (boost_table) ++ memset(boost_table, 0, sdelta->temp_band_count ++ * sizeof(*boost_table)); ++ ++ memset(sdelta, 0, sizeof(*sdelta)); ++ sdelta->table = sdelta_table; ++ sdelta->cap_volt = INT_MAX; ++ sdelta->boost_table = boost_table; ++ } ++ ++ /* Aggregate the requests of all threads */ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ thread = &ctrl->thread[i]; ++ thread_valid = false; ++ ++ sdelta = thread->aggr_corner.sdelta; ++ if (sdelta) { ++ sdelta_table = sdelta->table; ++ if (sdelta_table) { ++ sdelta_size = sdelta->max_core_count * ++ sdelta->temp_band_count; ++ memset(sdelta_table, 0, sdelta_size ++ * sizeof(*sdelta_table)); ++ } ++ ++ boost_table = sdelta->boost_table; ++ if (boost_table) ++ memset(boost_table, 0, sdelta->temp_band_count ++ * sizeof(*boost_table)); ++ ++ memset(sdelta, 0, sizeof(*sdelta)); ++ sdelta->table = sdelta_table; ++ sdelta->cap_volt = INT_MAX; ++ sdelta->boost_table = boost_table; ++ } ++ ++ memset(&thread->aggr_corner, 0, sizeof(thread->aggr_corner)); ++ thread->aggr_corner.sdelta = sdelta; ++ thread->aggr_corner.ro_mask = CPR3_RO_MASK; ++ ++ for (j = 0; j < thread->vreg_count; j++) { ++ vreg = &thread->vreg[j]; ++ ++ if (ctrl->cpr_enabled && ctrl->use_hw_closed_loop) ++ cpr3_update_vreg_closed_loop_volt(vreg, ++ vdd_volt, reg_last_measurement); ++ ++ if (!vreg->vreg_enabled ++ || vreg->current_corner ++ == CPR3_REGULATOR_CORNER_INVALID) { ++ /* Cannot participate in aggregation. */ ++ vreg->aggregated = false; ++ continue; ++ } else { ++ vreg->aggregated = true; ++ thread_valid = true; ++ } ++ ++ cpr3_regulator_aggregate_corners(&thread->aggr_corner, ++ &vreg->corner[vreg->current_corner], ++ true, ctrl->step_volt); ++ } ++ ++ valid |= thread_valid; ++ ++ if (thread_valid) ++ cpr3_regulator_aggregate_corners(&aggr_corner, ++ &thread->aggr_corner, ++ false, ctrl->step_volt); ++ } ++ ++ if (valid && ctrl->cpr_allowed_hw && ctrl->cpr_allowed_sw) { ++ rc = cpr3_closed_loop_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not enable CPR, rc=%d\n", rc); ++ return rc; ++ } ++ } else { ++ rc = cpr3_closed_loop_disable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not disable CPR, rc=%d\n", rc); ++ return rc; ++ } ++ } ++ ++ /* No threads are enabled with a valid corner so exit. */ ++ if (!valid) ++ return 0; ++ ++ /* ++ * When using CPR hardware closed-loop, the voltage may vary anywhere ++ * between the floor and ceiling voltage without software notification. ++ * Therefore, it is required that the floor to ceiling range for the ++ * aggregated corner not intersect the APM threshold voltage. Adjust ++ * the floor to ceiling range if this requirement is violated. ++ * ++ * The following algorithm is applied in the case that ++ * floor < threshold <= ceiling: ++ * if open_loop >= threshold - adj, then floor = threshold ++ * else ceiling = threshold - step ++ * where adj = an adjustment factor to ensure sufficient voltage margin ++ * and step = VDD output step size ++ * ++ * The open-loop and last known voltages are also bounded by the new ++ * floor or ceiling value as needed. ++ */ ++ if (ctrl->use_hw_closed_loop ++ && aggr_corner.ceiling_volt >= ctrl->apm_threshold_volt ++ && aggr_corner.floor_volt < ctrl->apm_threshold_volt) { ++ ++ if (aggr_corner.open_loop_volt ++ >= ctrl->apm_threshold_volt - ctrl->apm_adj_volt) ++ aggr_corner.floor_volt = ctrl->apm_threshold_volt; ++ else ++ aggr_corner.ceiling_volt ++ = ctrl->apm_threshold_volt - ctrl->step_volt; ++ ++ aggr_corner.last_volt ++ = max(aggr_corner.last_volt, aggr_corner.floor_volt); ++ aggr_corner.last_volt ++ = min(aggr_corner.last_volt, aggr_corner.ceiling_volt); ++ aggr_corner.open_loop_volt ++ = max(aggr_corner.open_loop_volt, aggr_corner.floor_volt); ++ aggr_corner.open_loop_volt ++ = min(aggr_corner.open_loop_volt, aggr_corner.ceiling_volt); ++ } ++ ++ if (ctrl->use_hw_closed_loop ++ && aggr_corner.ceiling_volt >= ctrl->mem_acc_threshold_volt ++ && aggr_corner.floor_volt < ctrl->mem_acc_threshold_volt) { ++ aggr_corner.floor_volt = ctrl->mem_acc_threshold_volt; ++ aggr_corner.last_volt = max(aggr_corner.last_volt, ++ aggr_corner.floor_volt); ++ aggr_corner.open_loop_volt = max(aggr_corner.open_loop_volt, ++ aggr_corner.floor_volt); ++ } ++ ++ if (ctrl->use_hw_closed_loop) { ++ dynamic_floor_volt ++ = cpr3_regulator_get_dynamic_floor_volt(ctrl, ++ reg_last_measurement); ++ if (aggr_corner.floor_volt < dynamic_floor_volt) { ++ aggr_corner.floor_volt = dynamic_floor_volt; ++ aggr_corner.last_volt = max(aggr_corner.last_volt, ++ aggr_corner.floor_volt); ++ aggr_corner.open_loop_volt ++ = max(aggr_corner.open_loop_volt, ++ aggr_corner.floor_volt); ++ aggr_corner.ceiling_volt = max(aggr_corner.ceiling_volt, ++ aggr_corner.floor_volt); ++ } ++ } ++ ++ if (ctrl->cpr_enabled && ctrl->last_corner_was_closed_loop) { ++ /* ++ * Always program open-loop voltage for CPR4 controllers which ++ * support hardware closed-loop. Storing the last closed loop ++ * voltage in corner structure can still help with debugging. ++ */ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) ++ new_volt = aggr_corner.last_volt; ++ else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4 ++ && ctrl->supports_hw_closed_loop) ++ new_volt = aggr_corner.open_loop_volt; ++ else ++ new_volt = min(aggr_corner.last_volt + ++ cpr3_regulator_max_sdelta_diff(aggr_corner.sdelta, ++ ctrl->step_volt), ++ aggr_corner.ceiling_volt); ++ ++ aggr_corner.last_volt = new_volt; ++ } else { ++ new_volt = aggr_corner.open_loop_volt; ++ aggr_corner.last_volt = aggr_corner.open_loop_volt; ++ } ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4 ++ && ctrl->supports_hw_closed_loop) { ++ /* ++ * Store last aggregated corner open-loop voltage in vdd_volt ++ * which is used when programming current aggregated corner ++ * required voltage. ++ */ ++ vdd_volt = last_corner_volt; ++ } ++ ++ cpr3_debug(ctrl, "setting new voltage=%d uV\n", new_volt); ++ rc = cpr3_regulator_scale_vdd_voltage(ctrl, new_volt, ++ vdd_volt, &aggr_corner); ++ if (rc) { ++ cpr3_err(ctrl, "vdd voltage scaling failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ /* Only update registers if CPR is enabled. */ ++ if (ctrl->cpr_enabled) { ++ if (ctrl->use_hw_closed_loop) { ++ /* Hardware closed-loop */ ++ ++ /* Set ceiling and floor limits in hardware */ ++ rc = regulator_set_voltage(ctrl->vdd_limit_regulator, ++ aggr_corner.floor_volt, ++ aggr_corner.ceiling_volt); ++ if (rc) { ++ cpr3_err(ctrl, "could not configure HW closed-loop voltage limits, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } else { ++ /* Software closed-loop */ ++ ++ /* ++ * Disable UP or DOWN interrupts when at ceiling or ++ * floor respectively. ++ */ ++ if (new_volt == aggr_corner.floor_volt) ++ aggr_corner.irq_en &= ~CPR3_IRQ_DOWN; ++ if (new_volt == aggr_corner.ceiling_volt) ++ aggr_corner.irq_en &= ~CPR3_IRQ_UP; ++ ++ cpr3_write(ctrl, CPR3_REG_IRQ_CLEAR, ++ CPR3_IRQ_UP | CPR3_IRQ_DOWN); ++ cpr3_write(ctrl, CPR3_REG_IRQ_EN, aggr_corner.irq_en); ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ cpr3_regulator_set_target_quot(&ctrl->thread[i]); ++ ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ ++ if (vreg->vreg_enabled) ++ vreg->last_closed_loop_corner ++ = vreg->current_corner; ++ } ++ } ++ ++ if (ctrl->proc_clock_throttle) { ++ if (aggr_corner.ceiling_volt > aggr_corner.floor_volt ++ && (ctrl->use_hw_closed_loop ++ || new_volt < aggr_corner.ceiling_volt)) ++ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE, ++ ctrl->proc_clock_throttle); ++ else ++ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE, ++ CPR3_PD_THROTTLE_DISABLE); ++ } ++ ++ /* ++ * Ensure that all CPR register writes complete before ++ * re-enabling CPR loop operation. ++ */ ++ wmb(); ++ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4 ++ && ctrl->vdd_limit_regulator) { ++ /* Set ceiling and floor limits in hardware */ ++ rc = regulator_set_voltage(ctrl->vdd_limit_regulator, ++ aggr_corner.floor_volt, ++ aggr_corner.ceiling_volt); ++ if (rc) { ++ cpr3_err(ctrl, "could not configure HW closed-loop voltage limits, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ ctrl->aggr_corner = aggr_corner; ++ ++ if (ctrl->allow_core_count_adj || ctrl->allow_temp_adj ++ || ctrl->allow_boost) { ++ rc = cpr3_controller_program_sdelta(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "failed to program sdelta, rc=%d\n", rc); ++ return rc; ++ } ++ } ++ ++ /* ++ * Only enable the CPR controller if it is possible to set more than ++ * one vdd-supply voltage. ++ */ ++ if (aggr_corner.ceiling_volt > aggr_corner.floor_volt && ++ !aggr_corner.use_open_loop) ++ cpr3_ctrl_loop_enable(ctrl); ++ ++ ctrl->last_corner_was_closed_loop = ctrl->cpr_enabled; ++ cpr3_debug(ctrl, "CPR configuration updated\n"); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_wait_for_idle() - wait for the CPR controller to no longer be ++ * busy ++ * @ctrl: Pointer to the CPR3 controller ++ * @max_wait_ns: Max wait time in nanoseconds ++ * ++ * Return: 0 on success or -ETIMEDOUT if the controller was still busy after ++ * the maximum delay time ++ */ ++static int cpr3_regulator_wait_for_idle(struct cpr3_controller *ctrl, ++ s64 max_wait_ns) ++{ ++ ktime_t start, end; ++ s64 time_ns; ++ u32 reg; ++ ++ /* ++ * Ensure that all previous CPR register writes have completed before ++ * checking the status register. ++ */ ++ mb(); ++ ++ start = ktime_get(); ++ do { ++ end = ktime_get(); ++ time_ns = ktime_to_ns(ktime_sub(end, start)); ++ if (time_ns > max_wait_ns) { ++ cpr3_err(ctrl, "CPR controller still busy after %lld us\n", ++ div_s64(time_ns, 1000)); ++ return -ETIMEDOUT; ++ } ++ usleep_range(50, 100); ++ reg = cpr3_read(ctrl, CPR3_REG_CPR_STATUS); ++ } while (reg & CPR3_CPR_STATUS_BUSY_MASK); ++ ++ return 0; ++} ++ ++/** ++ * cmp_int() - int comparison function to be passed into the sort() function ++ * which leads to ascending sorting ++ * @a: First int value ++ * @b: Second int value ++ * ++ * Return: >0 if a > b, 0 if a == b, <0 if a < b ++ */ ++static int cmp_int(const void *a, const void *b) ++{ ++ return *(int *)a - *(int *)b; ++} ++ ++/** ++ * cpr3_regulator_measure_aging() - measure the quotient difference for the ++ * specified CPR aging sensor ++ * @ctrl: Pointer to the CPR3 controller ++ * @aging_sensor: Aging sensor to measure ++ * ++ * Note that vdd-supply must be configured to the aging reference voltage before ++ * calling this function. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_measure_aging(struct cpr3_controller *ctrl, ++ struct cpr3_aging_sensor_info *aging_sensor) ++{ ++ u32 mask, reg, result, quot_min, quot_max, sel_min, sel_max; ++ u32 quot_min_scaled, quot_max_scaled; ++ u32 gcnt, gcnt_ref, gcnt0_restore, gcnt1_restore, irq_restore; ++ u32 ro_mask_restore, cont_dly_restore, up_down_dly_restore = 0; ++ int quot_delta, quot_delta_scaled, quot_delta_scaled_sum; ++ int *quot_delta_results; ++ int rc, rc2, i, aging_measurement_count, filtered_count; ++ bool is_aging_measurement; ++ ++ quot_delta_results = kcalloc(CPR3_AGING_MEASUREMENT_ITERATIONS, ++ sizeof(*quot_delta_results), GFP_KERNEL); ++ if (!quot_delta_results) ++ return -ENOMEM; ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc); ++ kfree(quot_delta_results); ++ return rc; ++ } ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ /* Enable up, down, and mid CPR interrupts */ ++ irq_restore = cpr3_read(ctrl, CPR3_REG_IRQ_EN); ++ cpr3_write(ctrl, CPR3_REG_IRQ_EN, ++ CPR3_IRQ_UP | CPR3_IRQ_DOWN | CPR3_IRQ_MID); ++ ++ /* Ensure that the aging sensor is assigned to CPR thread 0 */ ++ cpr3_write(ctrl, CPR3_REG_SENSOR_OWNER(aging_sensor->sensor_id), 0); ++ ++ /* Switch from HW to SW closed-loop if necessary */ ++ if (ctrl->supports_hw_closed_loop) { ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK, ++ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE); ++ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ cpr3_write(ctrl, CPR3_REG_HW_CLOSED_LOOP, ++ CPR3_HW_CLOSED_LOOP_DISABLE); ++ } ++ } ++ ++ /* Configure the GCNT for RO0 and RO1 that are used for aging */ ++ gcnt0_restore = cpr3_read(ctrl, CPR3_REG_GCNT(0)); ++ gcnt1_restore = cpr3_read(ctrl, CPR3_REG_GCNT(1)); ++ gcnt_ref = cpr3_regulator_get_gcnt(ctrl); ++ gcnt = gcnt_ref * 3 / 2; ++ cpr3_write(ctrl, CPR3_REG_GCNT(0), gcnt); ++ cpr3_write(ctrl, CPR3_REG_GCNT(1), gcnt); ++ ++ /* Unmask all RO's */ ++ ro_mask_restore = cpr3_read(ctrl, CPR3_REG_RO_MASK(0)); ++ cpr3_write(ctrl, CPR3_REG_RO_MASK(0), 0); ++ ++ /* ++ * Mask all sensors except for the one to measure and bypass all ++ * sensors in collapsible domains. ++ */ ++ for (i = 0; i <= ctrl->sensor_count / 32; i++) { ++ mask = GENMASK(min(31, ctrl->sensor_count - i * 32), 0); ++ if (aging_sensor->sensor_id / 32 >= i ++ && aging_sensor->sensor_id / 32 < (i + 1)) ++ mask &= ~BIT(aging_sensor->sensor_id % 32); ++ cpr3_write(ctrl, CPR3_REG_SENSOR_MASK_WRITE_BANK(i), mask); ++ cpr3_write(ctrl, CPR3_REG_SENSOR_BYPASS_WRITE_BANK(i), ++ aging_sensor->bypass_mask[i]); ++ } ++ ++ /* Set CPR loop delays to 0 us */ ++ if (ctrl->supports_hw_closed_loop ++ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ cont_dly_restore = cpr3_read(ctrl, CPR3_REG_CPR_TIMER_MID_CONT); ++ up_down_dly_restore = cpr3_read(ctrl, ++ CPR3_REG_CPR_TIMER_UP_DN_CONT); ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_MID_CONT, 0); ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_UP_DN_CONT, 0); ++ } else { ++ cont_dly_restore = cpr3_read(ctrl, ++ CPR3_REG_CPR_TIMER_AUTO_CONT); ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_AUTO_CONT, 0); ++ } ++ ++ /* Set count mode to all-at-once min with no repeat */ ++ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL, ++ CPR3_CPR_CTL_COUNT_MODE_MASK | CPR3_CPR_CTL_COUNT_REPEAT_MASK, ++ CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN ++ << CPR3_CPR_CTL_COUNT_MODE_SHIFT); ++ ++ cpr3_ctrl_loop_enable(ctrl); ++ ++ rc = cpr3_regulator_wait_for_idle(ctrl, ++ CPR3_AGING_MEASUREMENT_TIMEOUT_NS); ++ if (rc) ++ goto cleanup; ++ ++ /* Set count mode to all-at-once aging */ ++ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL, CPR3_CPR_CTL_COUNT_MODE_MASK, ++ CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_AGE ++ << CPR3_CPR_CTL_COUNT_MODE_SHIFT); ++ ++ aging_measurement_count = 0; ++ for (i = 0; i < CPR3_AGING_MEASUREMENT_ITERATIONS; i++) { ++ /* Send CONT_NACK */ ++ cpr3_write(ctrl, CPR3_REG_CONT_CMD, CPR3_CONT_CMD_NACK); ++ ++ rc = cpr3_regulator_wait_for_idle(ctrl, ++ CPR3_AGING_MEASUREMENT_TIMEOUT_NS); ++ if (rc) ++ goto cleanup; ++ ++ /* Check for PAGE_IS_AGE flag in status register */ ++ reg = cpr3_read(ctrl, CPR3_REG_CPR_STATUS); ++ is_aging_measurement ++ = reg & CPR3_CPR_STATUS_AGING_MEASUREMENT_MASK; ++ ++ /* Read CPR measurement results */ ++ result = cpr3_read(ctrl, CPR3_REG_RESULT1(0)); ++ quot_min = (result & CPR3_RESULT1_QUOT_MIN_MASK) ++ >> CPR3_RESULT1_QUOT_MIN_SHIFT; ++ quot_max = (result & CPR3_RESULT1_QUOT_MAX_MASK) ++ >> CPR3_RESULT1_QUOT_MAX_SHIFT; ++ sel_min = (result & CPR3_RESULT1_RO_MIN_MASK) ++ >> CPR3_RESULT1_RO_MIN_SHIFT; ++ sel_max = (result & CPR3_RESULT1_RO_MAX_MASK) ++ >> CPR3_RESULT1_RO_MAX_SHIFT; ++ ++ /* ++ * Scale the quotients so that they are equivalent to the fused ++ * values. This accounts for the difference in measurement ++ * interval times. ++ */ ++ quot_min_scaled = quot_min * (gcnt_ref + 1) / (gcnt + 1); ++ quot_max_scaled = quot_max * (gcnt_ref + 1) / (gcnt + 1); ++ ++ if (sel_max == 1) { ++ quot_delta = quot_max - quot_min; ++ quot_delta_scaled = quot_max_scaled - quot_min_scaled; ++ } else { ++ quot_delta = quot_min - quot_max; ++ quot_delta_scaled = quot_min_scaled - quot_max_scaled; ++ } ++ ++ if (is_aging_measurement) ++ quot_delta_results[aging_measurement_count++] ++ = quot_delta_scaled; ++ ++ cpr3_debug(ctrl, "aging results: page_is_age=%u, sel_min=%u, sel_max=%u, quot_min=%u, quot_max=%u, quot_delta=%d, quot_min_scaled=%u, quot_max_scaled=%u, quot_delta_scaled=%d\n", ++ is_aging_measurement, sel_min, sel_max, quot_min, ++ quot_max, quot_delta, quot_min_scaled, quot_max_scaled, ++ quot_delta_scaled); ++ } ++ ++ filtered_count ++ = aging_measurement_count - CPR3_AGING_MEASUREMENT_FILTER * 2; ++ if (filtered_count > 0) { ++ sort(quot_delta_results, aging_measurement_count, ++ sizeof(*quot_delta_results), cmp_int, NULL); ++ ++ quot_delta_scaled_sum = 0; ++ for (i = 0; i < filtered_count; i++) ++ quot_delta_scaled_sum ++ += quot_delta_results[i ++ + CPR3_AGING_MEASUREMENT_FILTER]; ++ ++ aging_sensor->measured_quot_diff ++ = quot_delta_scaled_sum / filtered_count; ++ cpr3_info(ctrl, "average quotient delta=%d (count=%d)\n", ++ aging_sensor->measured_quot_diff, ++ filtered_count); ++ } else { ++ cpr3_err(ctrl, "%d aging measurements completed after %d iterations\n", ++ aging_measurement_count, ++ CPR3_AGING_MEASUREMENT_ITERATIONS); ++ rc = -EBUSY; ++ } ++ ++cleanup: ++ kfree(quot_delta_results); ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc2 = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc2) { ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc2); ++ rc = rc2; ++ } ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ cpr3_write(ctrl, CPR3_REG_IRQ_EN, irq_restore); ++ ++ cpr3_write(ctrl, CPR3_REG_RO_MASK(0), ro_mask_restore); ++ ++ cpr3_write(ctrl, CPR3_REG_GCNT(0), gcnt0_restore); ++ cpr3_write(ctrl, CPR3_REG_GCNT(1), gcnt1_restore); ++ ++ if (ctrl->supports_hw_closed_loop ++ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_MID_CONT, cont_dly_restore); ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_UP_DN_CONT, ++ up_down_dly_restore); ++ } else { ++ cpr3_write(ctrl, CPR3_REG_CPR_TIMER_AUTO_CONT, ++ cont_dly_restore); ++ } ++ ++ for (i = 0; i <= ctrl->sensor_count / 32; i++) { ++ cpr3_write(ctrl, CPR3_REG_SENSOR_MASK_WRITE_BANK(i), 0); ++ cpr3_write(ctrl, CPR3_REG_SENSOR_BYPASS_WRITE_BANK(i), 0); ++ } ++ ++ cpr3_masked_write(ctrl, CPR3_REG_CPR_CTL, ++ CPR3_CPR_CTL_COUNT_MODE_MASK | CPR3_CPR_CTL_COUNT_REPEAT_MASK, ++ (ctrl->count_mode << CPR3_CPR_CTL_COUNT_MODE_SHIFT) ++ | (ctrl->count_repeat << CPR3_CPR_CTL_COUNT_REPEAT_SHIFT)); ++ ++ cpr3_write(ctrl, CPR3_REG_SENSOR_OWNER(aging_sensor->sensor_id), ++ ctrl->sensor_owner[aging_sensor->sensor_id]); ++ ++ cpr3_write(ctrl, CPR3_REG_IRQ_CLEAR, ++ CPR3_IRQ_UP | CPR3_IRQ_DOWN | CPR3_IRQ_MID); ++ ++ if (ctrl->supports_hw_closed_loop) { ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK, ++ ctrl->use_hw_closed_loop ++ ? CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE ++ : CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE); ++ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ cpr3_write(ctrl, CPR3_REG_HW_CLOSED_LOOP, ++ ctrl->use_hw_closed_loop ++ ? CPR3_HW_CLOSED_LOOP_ENABLE ++ : CPR3_HW_CLOSED_LOOP_DISABLE); ++ } ++ } ++ ++ return rc; ++} ++ ++/** ++ * cpr3_regulator_readjust_volt_and_quot() - readjust the target quotients as ++ * well as the floor, ceiling, and open-loop voltages for the ++ * regulator by removing the old adjustment and adding the new one ++ * @vreg: Pointer to the CPR3 regulator ++ * @old_adjust_volt: Old aging adjustment voltage in microvolts ++ * @new_adjust_volt: New aging adjustment voltage in microvolts ++ * ++ * Also reset the cached closed loop voltage (last_volt) to equal the open-loop ++ * voltage for each corner. ++ * ++ * Return: None ++ */ ++static void cpr3_regulator_readjust_volt_and_quot(struct cpr3_regulator *vreg, ++ int old_adjust_volt, int new_adjust_volt) ++{ ++ unsigned long long temp; ++ int i, j, old_volt, new_volt, rounded_volt; ++ ++ if (!vreg->aging_allowed) ++ return; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ temp = (unsigned long long)old_adjust_volt ++ * (unsigned long long)vreg->corner[i].aging_derate; ++ do_div(temp, 1000); ++ old_volt = temp; ++ ++ temp = (unsigned long long)new_adjust_volt ++ * (unsigned long long)vreg->corner[i].aging_derate; ++ do_div(temp, 1000); ++ new_volt = temp; ++ ++ old_volt = min(vreg->aging_max_adjust_volt, old_volt); ++ new_volt = min(vreg->aging_max_adjust_volt, new_volt); ++ ++ for (j = 0; j < CPR3_RO_COUNT; j++) { ++ if (vreg->corner[i].target_quot[j] != 0) { ++ vreg->corner[i].target_quot[j] ++ += cpr3_quot_adjustment( ++ vreg->corner[i].ro_scale[j], ++ new_volt) ++ - cpr3_quot_adjustment( ++ vreg->corner[i].ro_scale[j], ++ old_volt); ++ } ++ } ++ ++ rounded_volt = CPR3_ROUND(new_volt, ++ vreg->thread->ctrl->step_volt); ++ ++ if (!vreg->aging_allow_open_loop_adj) ++ rounded_volt = 0; ++ ++ vreg->corner[i].ceiling_volt ++ = vreg->corner[i].unaged_ceiling_volt + rounded_volt; ++ vreg->corner[i].ceiling_volt = min(vreg->corner[i].ceiling_volt, ++ vreg->corner[i].abs_ceiling_volt); ++ vreg->corner[i].floor_volt ++ = vreg->corner[i].unaged_floor_volt + rounded_volt; ++ vreg->corner[i].floor_volt = min(vreg->corner[i].floor_volt, ++ vreg->corner[i].ceiling_volt); ++ vreg->corner[i].open_loop_volt ++ = vreg->corner[i].unaged_open_loop_volt + rounded_volt; ++ vreg->corner[i].open_loop_volt ++ = min(vreg->corner[i].open_loop_volt, ++ vreg->corner[i].ceiling_volt); ++ ++ vreg->corner[i].last_volt = vreg->corner[i].open_loop_volt; ++ ++ cpr3_debug(vreg, "corner %d: applying %d uV closed-loop and %d uV open-loop voltage margin adjustment\n", ++ i, new_volt, rounded_volt); ++ } ++} ++ ++/** ++ * cpr3_regulator_set_aging_ref_adjustment() - adjust target quotients for the ++ * regulators managed by this CPR controller to account for aging ++ * @ctrl: Pointer to the CPR3 controller ++ * @ref_adjust_volt: New aging reference adjustment voltage in microvolts to ++ * apply to all regulators managed by this CPR controller ++ * ++ * The existing aging adjustment as defined by ctrl->aging_ref_adjust_volt is ++ * first removed and then the adjustment is applied. Lastly, the value of ++ * ctrl->aging_ref_adjust_volt is updated to ref_adjust_volt. ++ */ ++static void cpr3_regulator_set_aging_ref_adjustment( ++ struct cpr3_controller *ctrl, int ref_adjust_volt) ++{ ++ struct cpr3_regulator *vreg; ++ int i, j; ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ cpr3_regulator_readjust_volt_and_quot(vreg, ++ ctrl->aging_ref_adjust_volt, ref_adjust_volt); ++ } ++ } ++ ++ ctrl->aging_ref_adjust_volt = ref_adjust_volt; ++} ++ ++/** ++ * cpr3_regulator_aging_adjust() - adjust the target quotients for regulators ++ * based on the output of CPR aging sensors ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_aging_adjust(struct cpr3_controller *ctrl) ++{ ++ struct cpr3_regulator *vreg; ++ struct cpr3_corner restore_aging_corner; ++ struct cpr3_corner *corner; ++ int *restore_current_corner; ++ bool *restore_vreg_enabled; ++ int i, j, id, rc, rc2, vreg_count, aging_volt, max_aging_volt = 0; ++ u32 reg; ++ ++ if (!ctrl->aging_required || !ctrl->cpr_enabled ++ || ctrl->aggr_corner.ceiling_volt == 0 ++ || ctrl->aggr_corner.ceiling_volt > ctrl->aging_ref_volt) ++ return 0; ++ ++ for (i = 0, vreg_count = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ vreg_count++; ++ ++ if (vreg->aging_allowed && vreg->vreg_enabled ++ && vreg->current_corner > vreg->aging_corner) ++ return 0; ++ } ++ } ++ ++ /* Verify that none of the aging sensors are currently masked. */ ++ for (i = 0; i < ctrl->aging_sensor_count; i++) { ++ id = ctrl->aging_sensor[i].sensor_id; ++ reg = cpr3_read(ctrl, CPR3_REG_SENSOR_MASK_READ(id)); ++ if (reg & BIT(id % 32)) ++ return 0; ++ } ++ ++ /* ++ * Verify that the aging possible register (if specified) has an ++ * acceptable value. ++ */ ++ if (ctrl->aging_possible_reg) { ++ reg = readl_relaxed(ctrl->aging_possible_reg); ++ reg &= ctrl->aging_possible_mask; ++ if (reg != ctrl->aging_possible_val) ++ return 0; ++ } ++ ++ restore_current_corner = kcalloc(vreg_count, ++ sizeof(*restore_current_corner), GFP_KERNEL); ++ restore_vreg_enabled = kcalloc(vreg_count, ++ sizeof(*restore_vreg_enabled), GFP_KERNEL); ++ if (!restore_current_corner || !restore_vreg_enabled) { ++ kfree(restore_current_corner); ++ kfree(restore_vreg_enabled); ++ return -ENOMEM; ++ } ++ ++ /* Force all regulators to the aging corner */ ++ for (i = 0, vreg_count = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++, vreg_count++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ ++ restore_current_corner[vreg_count] ++ = vreg->current_corner; ++ restore_vreg_enabled[vreg_count] ++ = vreg->vreg_enabled; ++ ++ vreg->current_corner = vreg->aging_corner; ++ vreg->vreg_enabled = true; ++ } ++ } ++ ++ /* Force one of the regulators to require the aging reference voltage */ ++ vreg = &ctrl->thread[0].vreg[0]; ++ corner = &vreg->corner[vreg->current_corner]; ++ restore_aging_corner = *corner; ++ corner->ceiling_volt = ctrl->aging_ref_volt; ++ corner->floor_volt = ctrl->aging_ref_volt; ++ corner->open_loop_volt = ctrl->aging_ref_volt; ++ corner->last_volt = ctrl->aging_ref_volt; ++ ++ /* Skip last_volt caching */ ++ ctrl->last_corner_was_closed_loop = false; ++ ++ /* Set the vdd supply voltage to the aging reference voltage */ ++ rc = _cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "unable to force vdd-supply to the aging reference voltage=%d uV, rc=%d\n", ++ ctrl->aging_ref_volt, rc); ++ goto cleanup; ++ } ++ ++ if (ctrl->aging_vdd_mode) { ++ rc = regulator_set_mode(ctrl->vdd_regulator, ++ ctrl->aging_vdd_mode); ++ if (rc) { ++ cpr3_err(ctrl, "unable to configure vdd-supply for mode=%u, rc=%d\n", ++ ctrl->aging_vdd_mode, rc); ++ goto cleanup; ++ } ++ } ++ ++ /* Perform aging measurement on all aging sensors */ ++ for (i = 0; i < ctrl->aging_sensor_count; i++) { ++ for (j = 0; j < CPR3_AGING_RETRY_COUNT; j++) { ++ rc = cpr3_regulator_measure_aging(ctrl, ++ &ctrl->aging_sensor[i]); ++ if (!rc) ++ break; ++ } ++ ++ if (!rc) { ++ aging_volt = ++ cpr3_voltage_adjustment( ++ ctrl->aging_sensor[i].ro_scale, ++ ctrl->aging_sensor[i].measured_quot_diff ++ - ctrl->aging_sensor[i].init_quot_diff); ++ max_aging_volt = max(max_aging_volt, aging_volt); ++ } else { ++ cpr3_err(ctrl, "CPR aging measurement failed after %d tries, rc=%d\n", ++ j, rc); ++ ctrl->aging_failed = true; ++ ctrl->aging_required = false; ++ goto cleanup; ++ } ++ } ++ ++cleanup: ++ vreg = &ctrl->thread[0].vreg[0]; ++ vreg->corner[vreg->current_corner] = restore_aging_corner; ++ ++ for (i = 0, vreg_count = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++, vreg_count++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ vreg->current_corner ++ = restore_current_corner[vreg_count]; ++ vreg->vreg_enabled = restore_vreg_enabled[vreg_count]; ++ } ++ } ++ ++ kfree(restore_current_corner); ++ kfree(restore_vreg_enabled); ++ ++ /* Adjust the CPR target quotients according to the aging measurement */ ++ if (!rc) { ++ cpr3_regulator_set_aging_ref_adjustment(ctrl, max_aging_volt); ++ ++ cpr3_info(ctrl, "aging measurement successful; aging reference adjustment voltage=%d uV\n", ++ ctrl->aging_ref_adjust_volt); ++ ctrl->aging_succeeded = true; ++ ctrl->aging_required = false; ++ } ++ ++ if (ctrl->aging_complete_vdd_mode) { ++ rc = regulator_set_mode(ctrl->vdd_regulator, ++ ctrl->aging_complete_vdd_mode); ++ if (rc) ++ cpr3_err(ctrl, "unable to configure vdd-supply for mode=%u, rc=%d\n", ++ ctrl->aging_complete_vdd_mode, rc); ++ } ++ ++ /* Skip last_volt caching */ ++ ctrl->last_corner_was_closed_loop = false; ++ ++ /* ++ * Restore vdd-supply to the voltage before the aging measurement and ++ * restore the CPR3 controller hardware state. ++ */ ++ rc2 = _cpr3_regulator_update_ctrl_state(ctrl); ++ ++ /* Stop last_volt caching on for the next request */ ++ ctrl->last_corner_was_closed_loop = false; ++ ++ return rc ? rc : rc2; ++} ++ ++/** ++ * cpr3_regulator_update_ctrl_state() - update the state of the CPR controller ++ * to reflect the corners used by all CPR3 regulators as well as ++ * the CPR operating mode and perform aging adjustments if needed ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Note, CPR3 controller lock must be held by the caller. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_update_ctrl_state(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ rc = _cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) ++ return rc; ++ ++ return cpr3_regulator_aging_adjust(ctrl); ++} ++ ++/** ++ * cpr3_regulator_set_voltage() - set the voltage corner for the CPR3 regulator ++ * associated with the regulator device ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * @corner: New voltage corner to set (offset by CPR3_CORNER_OFFSET) ++ * @corner_max: Maximum voltage corner allowed (offset by ++ * CPR3_CORNER_OFFSET) ++ * @selector: Pointer which is filled with the selector value for the ++ * corner ++ * ++ * This function is passed as a callback function into the regulator ops that ++ * are registered for each cpr3-regulator device. The VDD voltage will not be ++ * physically configured until both this function and cpr3_regulator_enable() ++ * are called. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_set_voltage(struct regulator_dev *rdev, ++ int corner, int corner_max, unsigned *selector) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ int rc = 0; ++ int last_corner; ++ ++ corner -= CPR3_CORNER_OFFSET; ++ corner_max -= CPR3_CORNER_OFFSET; ++ *selector = corner; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (!vreg->vreg_enabled) { ++ vreg->current_corner = corner; ++ cpr3_debug(vreg, "stored corner=%d\n", corner); ++ goto done; ++ } else if (vreg->current_corner == corner) { ++ goto done; ++ } ++ ++ last_corner = vreg->current_corner; ++ vreg->current_corner = corner; ++ ++ if (vreg->cpr4_regulator_data != NULL) ++ if (vreg->cpr4_regulator_data->mem_acc_funcs != NULL) ++ vreg->cpr4_regulator_data->mem_acc_funcs->set_mem_acc(rdev); ++ ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(vreg, "could not update CPR state, rc=%d\n", rc); ++ vreg->current_corner = last_corner; ++ } ++ ++ if (vreg->cpr4_regulator_data != NULL) ++ if (vreg->cpr4_regulator_data->mem_acc_funcs != NULL) ++ vreg->cpr4_regulator_data->mem_acc_funcs->clear_mem_acc(rdev); ++ ++ cpr3_debug(vreg, "set corner=%d\n", corner); ++done: ++ mutex_unlock(&ctrl->lock); ++ ++ return rc; ++} ++ ++/** ++ * cpr3_handle_temp_open_loop_adjustment() - voltage based cold temperature ++ * ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * @is_cold: Flag to denote enter/exit cold condition ++ * ++ * This function is adjusts voltage margin based on cold condition ++ * ++ * Return: 0 = success ++ */ ++ ++int cpr3_handle_temp_open_loop_adjustment(struct cpr3_controller *ctrl, ++ bool is_cold) ++{ ++ int i ,j, k, rc; ++ struct cpr3_regulator *vreg; ++ ++ mutex_lock(&ctrl->lock); ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ for (k = 0; k < vreg->corner_count; k++) { ++ vreg->corner[k].open_loop_volt = is_cold ? ++ vreg->corner[k].cold_temp_open_loop_volt : ++ vreg->corner[k].normal_temp_open_loop_volt; ++ } ++ } ++ } ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ mutex_unlock(&ctrl->lock); ++ ++ return rc; ++} ++ ++/** ++ * cpr3_regulator_get_voltage() - get the voltage corner for the CPR3 regulator ++ * associated with the regulator device ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * ++ * This function is passed as a callback function into the regulator ops that ++ * are registered for each cpr3-regulator device. ++ * ++ * Return: voltage corner value offset by CPR3_CORNER_OFFSET ++ */ ++static int cpr3_regulator_get_voltage(struct regulator_dev *rdev) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ ++ if (vreg->current_corner == CPR3_REGULATOR_CORNER_INVALID) ++ return CPR3_CORNER_OFFSET; ++ else ++ return vreg->current_corner + CPR3_CORNER_OFFSET; ++} ++ ++/** ++ * cpr3_regulator_list_voltage() - return the voltage corner mapped to the ++ * specified selector ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * @selector: Regulator selector ++ * ++ * This function is passed as a callback function into the regulator ops that ++ * are registered for each cpr3-regulator device. ++ * ++ * Return: voltage corner value offset by CPR3_CORNER_OFFSET ++ */ ++static int cpr3_regulator_list_voltage(struct regulator_dev *rdev, ++ unsigned selector) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ ++ if (selector < vreg->corner_count) ++ return selector + CPR3_CORNER_OFFSET; ++ else ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_is_enabled() - return the enable state of the CPR3 regulator ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * ++ * This function is passed as a callback function into the regulator ops that ++ * are registered for each cpr3-regulator device. ++ * ++ * Return: true if regulator is enabled, false if regulator is disabled ++ */ ++static int cpr3_regulator_is_enabled(struct regulator_dev *rdev) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ ++ return vreg->vreg_enabled; ++} ++ ++/** ++ * cpr3_regulator_enable() - enable the CPR3 regulator ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * ++ * This function is passed as a callback function into the regulator ops that ++ * are registered for each cpr3-regulator device. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_enable(struct regulator_dev *rdev) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ int rc = 0; ++ ++ if (vreg->vreg_enabled == true) ++ return 0; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (ctrl->system_regulator) { ++ rc = regulator_enable(ctrl->system_regulator); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_enable(system) failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ rc = regulator_enable(ctrl->vdd_regulator); ++ if (rc) { ++ cpr3_err(vreg, "regulator_enable(vdd) failed, rc=%d\n", rc); ++ goto done; ++ } ++ ++ vreg->vreg_enabled = true; ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(vreg, "could not update CPR state, rc=%d\n", rc); ++ regulator_disable(ctrl->vdd_regulator); ++ vreg->vreg_enabled = false; ++ goto done; ++ } ++ ++ cpr3_debug(vreg, "Enabled\n"); ++done: ++ mutex_unlock(&ctrl->lock); ++ ++ return rc; ++} ++ ++/** ++ * cpr3_regulator_disable() - disable the CPR3 regulator ++ * @rdev: Regulator device pointer for the cpr3-regulator ++ * ++ * This function is passed as a callback function into the regulator ops that ++ * are registered for each cpr3-regulator device. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_disable(struct regulator_dev *rdev) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ int rc, rc2; ++ ++ if (vreg->vreg_enabled == false) ++ return 0; ++ ++ mutex_lock(&ctrl->lock); ++ rc = regulator_disable(ctrl->vdd_regulator); ++ if (rc) { ++ cpr3_err(vreg, "regulator_disable(vdd) failed, rc=%d\n", rc); ++ goto done; ++ } ++ ++ vreg->vreg_enabled = false; ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(vreg, "could not update CPR state, rc=%d\n", rc); ++ rc2 = regulator_enable(ctrl->vdd_regulator); ++ vreg->vreg_enabled = true; ++ goto done; ++ } ++ ++ if (ctrl->system_regulator) { ++ rc = regulator_disable(ctrl->system_regulator); ++ if (rc) { ++ cpr3_err(ctrl, "regulator_disable(system) failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ cpr3_debug(vreg, "Disabled\n"); ++done: ++ mutex_unlock(&ctrl->lock); ++ ++ return rc; ++} ++ ++static struct regulator_ops cpr3_regulator_ops = { ++ .enable = cpr3_regulator_enable, ++ .disable = cpr3_regulator_disable, ++ .is_enabled = cpr3_regulator_is_enabled, ++ .set_voltage = cpr3_regulator_set_voltage, ++ .get_voltage = cpr3_regulator_get_voltage, ++ .list_voltage = cpr3_regulator_list_voltage, ++}; ++ ++/** ++ * cpr3_print_result() - print CPR measurement results to the kernel log for ++ * debugging purposes ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: None ++ */ ++static void cpr3_print_result(struct cpr3_thread *thread) ++{ ++ struct cpr3_controller *ctrl = thread->ctrl; ++ u32 result[3], busy, step_dn, step_up, error_steps, error, negative; ++ u32 quot_min, quot_max, ro_min, ro_max, step_quot_min, step_quot_max; ++ u32 sensor_min, sensor_max; ++ char *sign; ++ ++ result[0] = cpr3_read(ctrl, CPR3_REG_RESULT0(thread->thread_id)); ++ result[1] = cpr3_read(ctrl, CPR3_REG_RESULT1(thread->thread_id)); ++ result[2] = cpr3_read(ctrl, CPR3_REG_RESULT2(thread->thread_id)); ++ ++ busy = !!(result[0] & CPR3_RESULT0_BUSY_MASK); ++ step_dn = !!(result[0] & CPR3_RESULT0_STEP_DN_MASK); ++ step_up = !!(result[0] & CPR3_RESULT0_STEP_UP_MASK); ++ error_steps = (result[0] & CPR3_RESULT0_ERROR_STEPS_MASK) ++ >> CPR3_RESULT0_ERROR_STEPS_SHIFT; ++ error = (result[0] & CPR3_RESULT0_ERROR_MASK) ++ >> CPR3_RESULT0_ERROR_SHIFT; ++ negative = !!(result[0] & CPR3_RESULT0_NEGATIVE_MASK); ++ ++ quot_min = (result[1] & CPR3_RESULT1_QUOT_MIN_MASK) ++ >> CPR3_RESULT1_QUOT_MIN_SHIFT; ++ quot_max = (result[1] & CPR3_RESULT1_QUOT_MAX_MASK) ++ >> CPR3_RESULT1_QUOT_MAX_SHIFT; ++ ro_min = (result[1] & CPR3_RESULT1_RO_MIN_MASK) ++ >> CPR3_RESULT1_RO_MIN_SHIFT; ++ ro_max = (result[1] & CPR3_RESULT1_RO_MAX_MASK) ++ >> CPR3_RESULT1_RO_MAX_SHIFT; ++ ++ step_quot_min = (result[2] & CPR3_RESULT2_STEP_QUOT_MIN_MASK) ++ >> CPR3_RESULT2_STEP_QUOT_MIN_SHIFT; ++ step_quot_max = (result[2] & CPR3_RESULT2_STEP_QUOT_MAX_MASK) ++ >> CPR3_RESULT2_STEP_QUOT_MAX_SHIFT; ++ sensor_min = (result[2] & CPR3_RESULT2_SENSOR_MIN_MASK) ++ >> CPR3_RESULT2_SENSOR_MIN_SHIFT; ++ sensor_max = (result[2] & CPR3_RESULT2_SENSOR_MAX_MASK) ++ >> CPR3_RESULT2_SENSOR_MAX_SHIFT; ++ ++ sign = negative ? "-" : ""; ++ cpr3_debug(ctrl, "thread %u: busy=%u, step_dn=%u, step_up=%u, error_steps=%s%u, error=%s%u\n", ++ thread->thread_id, busy, step_dn, step_up, sign, error_steps, ++ sign, error); ++ cpr3_debug(ctrl, "thread %u: quot_min=%u, quot_max=%u, ro_min=%u, ro_max=%u\n", ++ thread->thread_id, quot_min, quot_max, ro_min, ro_max); ++ cpr3_debug(ctrl, "thread %u: step_quot_min=%u, step_quot_max=%u, sensor_min=%u, sensor_max=%u\n", ++ thread->thread_id, step_quot_min, step_quot_max, sensor_min, ++ sensor_max); ++} ++ ++/** ++ * cpr3_thread_busy() - returns if the specified CPR3 thread is busy taking ++ * a measurement ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: CPR3 busy status ++ */ ++static bool cpr3_thread_busy(struct cpr3_thread *thread) ++{ ++ u32 result; ++ ++ result = cpr3_read(thread->ctrl, CPR3_REG_RESULT0(thread->thread_id)); ++ ++ return !!(result & CPR3_RESULT0_BUSY_MASK); ++} ++ ++/** ++ * cpr3_irq_handler() - CPR interrupt handler callback function used for ++ * software closed-loop operation ++ * @irq: CPR interrupt number ++ * @data: Private data corresponding to the CPR3 controller ++ * pointer ++ * ++ * This function increases or decreases the vdd supply voltage based upon the ++ * CPR controller recommendation. ++ * ++ * Return: IRQ_HANDLED ++ */ ++static irqreturn_t cpr3_irq_handler(int irq, void *data) ++{ ++ struct cpr3_controller *ctrl = data; ++ struct cpr3_corner *aggr = &ctrl->aggr_corner; ++ u32 cont = CPR3_CONT_CMD_NACK; ++ u32 reg_last_measurement = 0; ++ struct cpr3_regulator *vreg; ++ struct cpr3_corner *corner; ++ unsigned long flags; ++ int i, j, new_volt, last_volt, dynamic_floor_volt, rc; ++ u32 irq_en, status, cpr_status, ctl; ++ bool up, down; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (!ctrl->cpr_enabled) { ++ cpr3_debug(ctrl, "CPR interrupt received but CPR is disabled\n"); ++ mutex_unlock(&ctrl->lock); ++ return IRQ_HANDLED; ++ } else if (ctrl->use_hw_closed_loop) { ++ cpr3_debug(ctrl, "CPR interrupt received but CPR is using HW closed-loop\n"); ++ goto done; ++ } ++ ++ /* ++ * CPR IRQ status checking and CPR controller disabling must happen ++ * atomically and without invening delay in order to avoid an interrupt ++ * storm caused by the handler racing with the CPR controller. ++ */ ++ local_irq_save(flags); ++ preempt_disable(); ++ ++ status = cpr3_read(ctrl, CPR3_REG_IRQ_STATUS); ++ up = status & CPR3_IRQ_UP; ++ down = status & CPR3_IRQ_DOWN; ++ ++ if (!up && !down) { ++ /* ++ * Toggle the CPR controller off and then back on since the ++ * hardware and software states are out of sync. This condition ++ * occurs after an aging measurement completes as the CPR IRQ ++ * physically triggers during the aging measurement but the ++ * handler is stuck waiting on the mutex lock. ++ */ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ local_irq_restore(flags); ++ preempt_enable(); ++ ++ /* Wait for the loop disable write to complete */ ++ mb(); ++ ++ /* Wait for BUSY=1 and LOOP_EN=0 in CPR controller registers. */ ++ for (i = 0; i < CPR3_REGISTER_WRITE_DELAY_US / 10; i++) { ++ cpr_status = cpr3_read(ctrl, CPR3_REG_CPR_STATUS); ++ ctl = cpr3_read(ctrl, CPR3_REG_CPR_CTL); ++ if (cpr_status & CPR3_CPR_STATUS_BUSY_MASK ++ && (ctl & CPR3_CPR_CTL_LOOP_EN_MASK) ++ == CPR3_CPR_CTL_LOOP_DISABLE) ++ break; ++ udelay(10); ++ } ++ if (i == CPR3_REGISTER_WRITE_DELAY_US / 10) ++ cpr3_debug(ctrl, "CPR controller not disabled after %d us\n", ++ CPR3_REGISTER_WRITE_DELAY_US); ++ ++ /* Clear interrupt status */ ++ cpr3_write(ctrl, CPR3_REG_IRQ_CLEAR, ++ CPR3_IRQ_UP | CPR3_IRQ_DOWN); ++ ++ /* Wait for the interrupt clearing write to complete */ ++ mb(); ++ ++ /* Wait for IRQ_STATUS register to be cleared. */ ++ for (i = 0; i < CPR3_REGISTER_WRITE_DELAY_US / 10; i++) { ++ status = cpr3_read(ctrl, CPR3_REG_IRQ_STATUS); ++ if (!(status & (CPR3_IRQ_UP | CPR3_IRQ_DOWN))) ++ break; ++ udelay(10); ++ } ++ if (i == CPR3_REGISTER_WRITE_DELAY_US / 10) ++ cpr3_debug(ctrl, "CPR interrupts not cleared after %d us\n", ++ CPR3_REGISTER_WRITE_DELAY_US); ++ ++ cpr3_ctrl_loop_enable(ctrl); ++ ++ cpr3_debug(ctrl, "CPR interrupt received but no up or down status bit is set\n"); ++ ++ mutex_unlock(&ctrl->lock); ++ return IRQ_HANDLED; ++ } else if (up && down) { ++ cpr3_debug(ctrl, "both up and down status bits set\n"); ++ /* The up flag takes precedence over the down flag. */ ++ down = false; ++ } ++ ++ if (ctrl->supports_hw_closed_loop) ++ reg_last_measurement ++ = cpr3_read(ctrl, CPR3_REG_LAST_MEASUREMENT); ++ dynamic_floor_volt = cpr3_regulator_get_dynamic_floor_volt(ctrl, ++ reg_last_measurement); ++ ++ local_irq_restore(flags); ++ preempt_enable(); ++ ++ irq_en = aggr->irq_en; ++ last_volt = aggr->last_volt; ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ if (cpr3_thread_busy(&ctrl->thread[i])) { ++ cpr3_debug(ctrl, "CPR thread %u busy when it should be waiting for SW cont\n", ++ ctrl->thread[i].thread_id); ++ goto done; ++ } ++ } ++ ++ new_volt = up ? last_volt + ctrl->step_volt ++ : last_volt - ctrl->step_volt; ++ ++ /* Re-enable UP/DOWN interrupt when its opposite is received. */ ++ irq_en |= up ? CPR3_IRQ_DOWN : CPR3_IRQ_UP; ++ ++ if (new_volt > aggr->ceiling_volt) { ++ new_volt = aggr->ceiling_volt; ++ irq_en &= ~CPR3_IRQ_UP; ++ cpr3_debug(ctrl, "limiting to ceiling=%d uV\n", ++ aggr->ceiling_volt); ++ } else if (new_volt < aggr->floor_volt) { ++ new_volt = aggr->floor_volt; ++ irq_en &= ~CPR3_IRQ_DOWN; ++ cpr3_debug(ctrl, "limiting to floor=%d uV\n", aggr->floor_volt); ++ } ++ ++ if (down && new_volt < dynamic_floor_volt) { ++ /* ++ * The vdd-supply voltage should not be decreased below the ++ * dynamic floor voltage. However, it is not necessary (and ++ * counter productive) to force the voltage up to this level ++ * if it happened to be below it since the closed-loop voltage ++ * must have gotten there in a safe manner while the power ++ * domains for the CPR3 regulator imposing the dynamic floor ++ * were not bypassed. ++ */ ++ new_volt = last_volt; ++ irq_en &= ~CPR3_IRQ_DOWN; ++ cpr3_debug(ctrl, "limiting to dynamic floor=%d uV\n", ++ dynamic_floor_volt); ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) ++ cpr3_print_result(&ctrl->thread[i]); ++ ++ cpr3_debug(ctrl, "%s: new_volt=%d uV, last_volt=%d uV\n", ++ up ? "UP" : "DN", new_volt, last_volt); ++ ++ if (ctrl->proc_clock_throttle && last_volt == aggr->ceiling_volt ++ && new_volt < last_volt) ++ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE, ++ ctrl->proc_clock_throttle); ++ ++ if (new_volt != last_volt) { ++ rc = cpr3_regulator_scale_vdd_voltage(ctrl, new_volt, ++ last_volt, ++ aggr); ++ if (rc) { ++ cpr3_err(ctrl, "scale_vdd() failed to set vdd=%d uV, rc=%d\n", ++ new_volt, rc); ++ goto done; ++ } ++ cont = CPR3_CONT_CMD_ACK; ++ ++ /* ++ * Update the closed-loop voltage for all regulators managed ++ * by this CPR controller. ++ */ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ cpr3_update_vreg_closed_loop_volt(vreg, ++ new_volt, reg_last_measurement); ++ } ++ } ++ } ++ ++ if (ctrl->proc_clock_throttle && new_volt == aggr->ceiling_volt) ++ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE, ++ CPR3_PD_THROTTLE_DISABLE); ++ ++ corner = &ctrl->thread[0].vreg[0].corner[ ++ ctrl->thread[0].vreg[0].current_corner]; ++ ++ if (irq_en != aggr->irq_en) { ++ aggr->irq_en = irq_en; ++ cpr3_write(ctrl, CPR3_REG_IRQ_EN, irq_en); ++ } ++ ++ aggr->last_volt = new_volt; ++ ++done: ++ /* Clear interrupt status */ ++ cpr3_write(ctrl, CPR3_REG_IRQ_CLEAR, CPR3_IRQ_UP | CPR3_IRQ_DOWN); ++ ++ /* ACK or NACK the CPR controller */ ++ cpr3_write(ctrl, CPR3_REG_CONT_CMD, cont); ++ ++ mutex_unlock(&ctrl->lock); ++ return IRQ_HANDLED; ++} ++ ++/** ++ * cpr3_ceiling_irq_handler() - CPR ceiling reached interrupt handler callback ++ * function used for hardware closed-loop operation ++ * @irq: CPR ceiling interrupt number ++ * @data: Private data corresponding to the CPR3 controller ++ * pointer ++ * ++ * This function disables processor clock throttling and closed-loop operation ++ * when the ceiling voltage is reached. ++ * ++ * Return: IRQ_HANDLED ++ */ ++static irqreturn_t cpr3_ceiling_irq_handler(int irq, void *data) ++{ ++ struct cpr3_controller *ctrl = data; ++ int volt; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (!ctrl->cpr_enabled) { ++ cpr3_debug(ctrl, "CPR ceiling interrupt received but CPR is disabled\n"); ++ goto done; ++ } else if (!ctrl->use_hw_closed_loop) { ++ cpr3_debug(ctrl, "CPR ceiling interrupt received but CPR is using SW closed-loop\n"); ++ goto done; ++ } ++ ++ volt = regulator_get_voltage(ctrl->vdd_regulator); ++ if (volt < 0) { ++ cpr3_err(ctrl, "could not get vdd voltage, rc=%d\n", volt); ++ goto done; ++ } else if (volt != ctrl->aggr_corner.ceiling_volt) { ++ cpr3_debug(ctrl, "CPR ceiling interrupt received but vdd voltage: %d uV != ceiling voltage: %d uV\n", ++ volt, ctrl->aggr_corner.ceiling_volt); ++ goto done; ++ } ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ /* ++ * Since the ceiling voltage has been reached, disable processor ++ * clock throttling as well as CPR closed-loop operation. ++ */ ++ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE, ++ CPR3_PD_THROTTLE_DISABLE); ++ cpr3_ctrl_loop_disable(ctrl); ++ cpr3_debug(ctrl, "CPR closed-loop and throttling disabled\n"); ++ } ++ ++done: ++ mutex_unlock(&ctrl->lock); ++ return IRQ_HANDLED; ++} ++ ++/** ++ * cpr3_regulator_vreg_register() - register a regulator device for a CPR3 ++ * regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function initializes all regulator framework related structures and then ++ * calls regulator_register() for the CPR3 regulator. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_vreg_register(struct cpr3_regulator *vreg) ++{ ++ struct regulator_config config = {}; ++ struct regulator_desc *rdesc; ++ struct regulator_init_data *init_data; ++ int rc; ++ ++ init_data = of_get_regulator_init_data(vreg->thread->ctrl->dev, ++ vreg->of_node, &vreg->rdesc); ++ if (!init_data) { ++ cpr3_err(vreg, "regulator init data is missing\n"); ++ return -EINVAL; ++ } ++ ++ init_data->constraints.input_uV = init_data->constraints.max_uV; ++ rdesc = &vreg->rdesc; ++ init_data->constraints.valid_ops_mask |= ++ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS; ++ rdesc->ops = &cpr3_regulator_ops; ++ ++ rdesc->n_voltages = vreg->corner_count; ++ rdesc->name = init_data->constraints.name; ++ rdesc->owner = THIS_MODULE; ++ rdesc->type = REGULATOR_VOLTAGE; ++ ++ config.dev = vreg->thread->ctrl->dev; ++ config.driver_data = vreg; ++ config.init_data = init_data; ++ config.of_node = vreg->of_node; ++ ++ vreg->rdev = regulator_register(rdesc, &config); ++ if (IS_ERR(vreg->rdev)) { ++ rc = PTR_ERR(vreg->rdev); ++ cpr3_err(vreg, "regulator_register failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ return 0; ++} ++ ++static int debugfs_int_set(void *data, u64 val) ++{ ++ *(int *)data = val; ++ return 0; ++} ++ ++static int debugfs_int_get(void *data, u64 *val) ++{ ++ *val = *(int *)data; ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(fops_int, debugfs_int_get, debugfs_int_set, "%lld\n"); ++DEFINE_SIMPLE_ATTRIBUTE(fops_int_ro, debugfs_int_get, NULL, "%lld\n"); ++DEFINE_SIMPLE_ATTRIBUTE(fops_int_wo, NULL, debugfs_int_set, "%lld\n"); ++ ++/** ++ * debugfs_create_int - create a debugfs file that is used to read and write a ++ * signed int value ++ * @name: Pointer to a string containing the name of the file to ++ * create ++ * @mode: The permissions that the file should have ++ * @parent: Pointer to the parent dentry for this file. This should ++ * be a directory dentry if set. If this parameter is ++ * %NULL, then the file will be created in the root of the ++ * debugfs filesystem. ++ * @value: Pointer to the variable that the file should read to and ++ * write from ++ * ++ * This function creates a file in debugfs with the given name that ++ * contains the value of the variable @value. If the @mode variable is so ++ * set, it can be read from, and written to. ++ * ++ * This function will return a pointer to a dentry if it succeeds. This ++ * pointer must be passed to the debugfs_remove() function when the file is ++ * to be removed. If an error occurs, %NULL will be returned. ++ */ ++static struct dentry *debugfs_create_int(const char *name, umode_t mode, ++ struct dentry *parent, int *value) ++{ ++ /* if there are no write bits set, make read only */ ++ if (!(mode & S_IWUGO)) ++ return debugfs_create_file(name, mode, parent, value, ++ &fops_int_ro); ++ /* if there are no read bits set, make write only */ ++ if (!(mode & S_IRUGO)) ++ return debugfs_create_file(name, mode, parent, value, ++ &fops_int_wo); ++ ++ return debugfs_create_file(name, mode, parent, value, &fops_int); ++} ++ ++static int debugfs_bool_get(void *data, u64 *val) ++{ ++ *val = *(bool *)data; ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(fops_bool_ro, debugfs_bool_get, NULL, "%lld\n"); ++ ++/** ++ * struct cpr3_debug_corner_info - data structure used by the ++ * cpr3_debugfs_create_corner_int function ++ * @vreg: Pointer to the CPR3 regulator ++ * @index: Pointer to the corner array index ++ * @member_offset: Offset in bytes from the beginning of struct cpr3_corner ++ * to the beginning of the value to be read from ++ * @corner: Pointer to the CPR3 corner array ++ */ ++struct cpr3_debug_corner_info { ++ struct cpr3_regulator *vreg; ++ int *index; ++ size_t member_offset; ++ struct cpr3_corner *corner; ++}; ++ ++static int cpr3_debug_corner_int_get(void *data, u64 *val) ++{ ++ struct cpr3_debug_corner_info *info = data; ++ struct cpr3_controller *ctrl = info->vreg->thread->ctrl; ++ int i; ++ ++ mutex_lock(&ctrl->lock); ++ ++ i = *info->index; ++ if (i < 0) ++ i = 0; ++ ++ *val = *(int *)((char *)&info->vreg->corner[i] + info->member_offset); ++ ++ mutex_unlock(&ctrl->lock); ++ ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_corner_int_fops, cpr3_debug_corner_int_get, ++ NULL, "%lld\n"); ++ ++/** ++ * cpr3_debugfs_create_corner_int - create a debugfs file that is used to read ++ * a signed int value out of a CPR3 regulator's corner array ++ * @vreg: Pointer to the CPR3 regulator ++ * @name: Pointer to a string containing the name of the file to ++ * create ++ * @mode: The permissions that the file should have ++ * @parent: Pointer to the parent dentry for this file. This should ++ * be a directory dentry if set. If this parameter is ++ * %NULL, then the file will be created in the root of the ++ * debugfs filesystem. ++ * @index: Pointer to the corner array index ++ * @member_offset: Offset in bytes from the beginning of struct cpr3_corner ++ * to the beginning of the value to be read from ++ * ++ * This function creates a file in debugfs with the given name that ++ * contains the value of the int type variable vreg->corner[index].member ++ * where member_offset == offsetof(struct cpr3_corner, member). ++ */ ++static struct dentry *cpr3_debugfs_create_corner_int( ++ struct cpr3_regulator *vreg, const char *name, umode_t mode, ++ struct dentry *parent, int *index, size_t member_offset) ++{ ++ struct cpr3_debug_corner_info *info; ++ ++ info = devm_kzalloc(vreg->thread->ctrl->dev, sizeof(*info), GFP_KERNEL); ++ if (!info) ++ return NULL; ++ ++ info->vreg = vreg; ++ info->index = index; ++ info->member_offset = member_offset; ++ ++ return debugfs_create_file(name, mode, parent, info, ++ &cpr3_debug_corner_int_fops); ++} ++ ++static int cpr3_debug_quot_open(struct inode *inode, struct file *file) ++{ ++ struct cpr3_debug_corner_info *info = inode->i_private; ++ struct cpr3_thread *thread = info->vreg->thread; ++ int size, i, pos; ++ u32 *quot; ++ char *buf; ++ ++ /* ++ * Max size: ++ * - 10 digits + ' ' or '\n' = 11 bytes per number ++ * - terminating '\0' ++ */ ++ size = CPR3_RO_COUNT * 11; ++ buf = kzalloc(size + 1, GFP_KERNEL); ++ if (!buf) ++ return -ENOMEM; ++ ++ file->private_data = buf; ++ ++ mutex_lock(&thread->ctrl->lock); ++ ++ quot = info->corner[*info->index].target_quot; ++ ++ for (i = 0, pos = 0; i < CPR3_RO_COUNT; i++) ++ pos += scnprintf(buf + pos, size - pos, "%u%c", ++ quot[i], i < CPR3_RO_COUNT - 1 ? ' ' : '\n'); ++ ++ mutex_unlock(&thread->ctrl->lock); ++ ++ return nonseekable_open(inode, file); ++} ++ ++static ssize_t cpr3_debug_quot_read(struct file *file, char __user *buf, ++ size_t len, loff_t *ppos) ++{ ++ return simple_read_from_buffer(buf, len, ppos, file->private_data, ++ strlen(file->private_data)); ++} ++ ++static int cpr3_debug_quot_release(struct inode *inode, struct file *file) ++{ ++ kfree(file->private_data); ++ ++ return 0; ++} ++ ++static const struct file_operations cpr3_debug_quot_fops = { ++ .owner = THIS_MODULE, ++ .open = cpr3_debug_quot_open, ++ .release = cpr3_debug_quot_release, ++ .read = cpr3_debug_quot_read, ++ .llseek = no_llseek, ++}; ++ ++/** ++ * cpr3_regulator_debugfs_corner_add() - add debugfs files to expose ++ * configuration data for the CPR corner ++ * @vreg: Pointer to the CPR3 regulator ++ * @corner_dir: Pointer to the parent corner dentry for the new files ++ * @index: Pointer to the corner array index ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_debugfs_corner_add(struct cpr3_regulator *vreg, ++ struct dentry *corner_dir, int *index) ++{ ++ struct cpr3_debug_corner_info *info; ++ struct dentry *temp; ++ ++ temp = cpr3_debugfs_create_corner_int(vreg, "floor_volt", S_IRUGO, ++ corner_dir, index, offsetof(struct cpr3_corner, floor_volt)); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "floor_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = cpr3_debugfs_create_corner_int(vreg, "ceiling_volt", S_IRUGO, ++ corner_dir, index, offsetof(struct cpr3_corner, ceiling_volt)); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "ceiling_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = cpr3_debugfs_create_corner_int(vreg, "open_loop_volt", S_IRUGO, ++ corner_dir, index, ++ offsetof(struct cpr3_corner, open_loop_volt)); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "open_loop_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = cpr3_debugfs_create_corner_int(vreg, "last_volt", S_IRUGO, ++ corner_dir, index, offsetof(struct cpr3_corner, last_volt)); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "last_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ info = devm_kzalloc(vreg->thread->ctrl->dev, sizeof(*info), GFP_KERNEL); ++ if (!info) ++ return; ++ ++ info->vreg = vreg; ++ info->index = index; ++ info->corner = vreg->corner; ++ ++ temp = debugfs_create_file("target_quots", S_IRUGO, corner_dir, ++ info, &cpr3_debug_quot_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "target_quots debugfs file creation failed\n"); ++ return; ++ } ++} ++ ++/** ++ * cpr3_debug_corner_index_set() - debugfs callback used to change the ++ * value of the CPR3 regulator debug_corner index ++ * @data: Pointer to private data which is equal to the CPR3 ++ * regulator pointer ++ * @val: New value for debug_corner ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_corner_index_set(void *data, u64 val) ++{ ++ struct cpr3_regulator *vreg = data; ++ ++ if (val < CPR3_CORNER_OFFSET || val > vreg->corner_count) { ++ cpr3_err(vreg, "invalid corner index %llu; allowed values: %d-%d\n", ++ val, CPR3_CORNER_OFFSET, vreg->corner_count); ++ return -EINVAL; ++ } ++ ++ mutex_lock(&vreg->thread->ctrl->lock); ++ vreg->debug_corner = val - CPR3_CORNER_OFFSET; ++ mutex_unlock(&vreg->thread->ctrl->lock); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_debug_corner_index_get() - debugfs callback used to retrieve ++ * the value of the CPR3 regulator debug_corner index ++ * @data: Pointer to private data which is equal to the CPR3 ++ * regulator pointer ++ * @val: Output parameter written with the value of ++ * debug_corner ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_corner_index_get(void *data, u64 *val) ++{ ++ struct cpr3_regulator *vreg = data; ++ ++ *val = vreg->debug_corner + CPR3_CORNER_OFFSET; ++ ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_corner_index_fops, ++ cpr3_debug_corner_index_get, ++ cpr3_debug_corner_index_set, ++ "%llu\n"); ++ ++/** ++ * cpr3_debug_current_corner_index_get() - debugfs callback used to retrieve ++ * the value of the CPR3 regulator current_corner index ++ * @data: Pointer to private data which is equal to the CPR3 ++ * regulator pointer ++ * @val: Output parameter written with the value of ++ * current_corner ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_current_corner_index_get(void *data, u64 *val) ++{ ++ struct cpr3_regulator *vreg = data; ++ ++ *val = vreg->current_corner + CPR3_CORNER_OFFSET; ++ ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_current_corner_index_fops, ++ cpr3_debug_current_corner_index_get, ++ NULL, "%llu\n"); ++ ++/** ++ * cpr3_regulator_debugfs_vreg_add() - add debugfs files to expose configuration ++ * data for the CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * @thread_dir CPR3 thread debugfs directory handle ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_debugfs_vreg_add(struct cpr3_regulator *vreg, ++ struct dentry *thread_dir) ++{ ++ struct dentry *temp, *corner_dir, *vreg_dir; ++ ++ vreg_dir = debugfs_create_dir(vreg->name, thread_dir); ++ if (IS_ERR_OR_NULL(vreg_dir)) { ++ cpr3_err(vreg, "%s debugfs directory creation failed\n", ++ vreg->name); ++ return; ++ } ++ ++ temp = debugfs_create_int("speed_bin_fuse", S_IRUGO, vreg_dir, ++ &vreg->speed_bin_fuse); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "speed_bin_fuse debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("cpr_rev_fuse", S_IRUGO, vreg_dir, ++ &vreg->cpr_rev_fuse); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "cpr_rev_fuse debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("fuse_combo", S_IRUGO, vreg_dir, ++ &vreg->fuse_combo); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "fuse_combo debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("corner_count", S_IRUGO, vreg_dir, ++ &vreg->corner_count); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "corner_count debugfs file creation failed\n"); ++ return; ++ } ++ ++ corner_dir = debugfs_create_dir("corner", vreg_dir); ++ if (IS_ERR_OR_NULL(corner_dir)) { ++ cpr3_err(vreg, "corner debugfs directory creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_file("index", S_IRUGO | S_IWUSR, corner_dir, ++ vreg, &cpr3_debug_corner_index_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "index debugfs file creation failed\n"); ++ return; ++ } ++ ++ cpr3_regulator_debugfs_corner_add(vreg, corner_dir, ++ &vreg->debug_corner); ++ ++ corner_dir = debugfs_create_dir("current_corner", vreg_dir); ++ if (IS_ERR_OR_NULL(corner_dir)) { ++ cpr3_err(vreg, "current_corner debugfs directory creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_file("index", S_IRUGO, corner_dir, ++ vreg, &cpr3_debug_current_corner_index_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(vreg, "index debugfs file creation failed\n"); ++ return; ++ } ++ ++ cpr3_regulator_debugfs_corner_add(vreg, corner_dir, ++ &vreg->current_corner); ++} ++ ++/** ++ * cpr3_regulator_debugfs_thread_add() - add debugfs files to expose ++ * configuration data for the CPR thread ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_debugfs_thread_add(struct cpr3_thread *thread) ++{ ++ struct cpr3_controller *ctrl = thread->ctrl; ++ struct dentry *aggr_dir, *temp, *thread_dir; ++ struct cpr3_debug_corner_info *info; ++ char buf[20]; ++ int *index; ++ int i; ++ ++ scnprintf(buf, sizeof(buf), "thread%u", thread->thread_id); ++ thread_dir = debugfs_create_dir(buf, thread->ctrl->debugfs); ++ if (IS_ERR_OR_NULL(thread_dir)) { ++ cpr3_err(ctrl, "thread %u %s debugfs directory creation failed\n", ++ thread->thread_id, buf); ++ return; ++ } ++ ++ aggr_dir = debugfs_create_dir("max_aggregated_params", thread_dir); ++ if (IS_ERR_OR_NULL(aggr_dir)) { ++ cpr3_err(ctrl, "thread %u max_aggregated_params debugfs directory creation failed\n", ++ thread->thread_id); ++ return; ++ } ++ ++ temp = debugfs_create_int("floor_volt", S_IRUGO, aggr_dir, ++ &thread->aggr_corner.floor_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "thread %u aggr floor_volt debugfs file creation failed\n", ++ thread->thread_id); ++ return; ++ } ++ ++ temp = debugfs_create_int("ceiling_volt", S_IRUGO, aggr_dir, ++ &thread->aggr_corner.ceiling_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "thread %u aggr ceiling_volt debugfs file creation failed\n", ++ thread->thread_id); ++ return; ++ } ++ ++ temp = debugfs_create_int("open_loop_volt", S_IRUGO, aggr_dir, ++ &thread->aggr_corner.open_loop_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "thread %u aggr open_loop_volt debugfs file creation failed\n", ++ thread->thread_id); ++ return; ++ } ++ ++ temp = debugfs_create_int("last_volt", S_IRUGO, aggr_dir, ++ &thread->aggr_corner.last_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "thread %u aggr last_volt debugfs file creation failed\n", ++ thread->thread_id); ++ return; ++ } ++ ++ info = devm_kzalloc(thread->ctrl->dev, sizeof(*info), GFP_KERNEL); ++ index = devm_kzalloc(thread->ctrl->dev, sizeof(*index), GFP_KERNEL); ++ if (!info || !index) ++ return; ++ *index = 0; ++ info->vreg = &thread->vreg[0]; ++ info->index = index; ++ info->corner = &thread->aggr_corner; ++ ++ temp = debugfs_create_file("target_quots", S_IRUGO, aggr_dir, ++ info, &cpr3_debug_quot_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "thread %u target_quots debugfs file creation failed\n", ++ thread->thread_id); ++ return; ++ } ++ ++ for (i = 0; i < thread->vreg_count; i++) ++ cpr3_regulator_debugfs_vreg_add(&thread->vreg[i], thread_dir); ++} ++ ++/** ++ * cpr3_debug_closed_loop_enable_set() - debugfs callback used to change the ++ * value of the CPR controller cpr_allowed_sw flag which enables or ++ * disables closed-loop operation ++ * @data: Pointer to private data which is equal to the CPR ++ * controller pointer ++ * @val: New value for cpr_allowed_sw ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_closed_loop_enable_set(void *data, u64 val) ++{ ++ struct cpr3_controller *ctrl = data; ++ bool enable = !!val; ++ int rc; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (ctrl->cpr_allowed_sw == enable) ++ goto done; ++ ++ if (enable && !ctrl->cpr_allowed_hw) { ++ cpr3_err(ctrl, "CPR closed-loop operation is not allowed\n"); ++ goto done; ++ } ++ ++ ctrl->cpr_allowed_sw = enable; ++ ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not change CPR enable state=%u, rc=%d\n", ++ enable, rc); ++ goto done; ++ } ++ ++ if (ctrl->proc_clock_throttle && !ctrl->cpr_enabled) { ++ rc = cpr3_clock_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "clock enable failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ctrl->cpr_enabled = true; ++ ++ cpr3_write(ctrl, CPR3_REG_PD_THROTTLE, ++ CPR3_PD_THROTTLE_DISABLE); ++ ++ cpr3_clock_disable(ctrl); ++ ctrl->cpr_enabled = false; ++ } ++ ++ cpr3_debug(ctrl, "closed-loop=%s\n", enable ? "enabled" : "disabled"); ++done: ++ mutex_unlock(&ctrl->lock); ++ return 0; ++} ++ ++/** ++ * cpr3_debug_closed_loop_enable_get() - debugfs callback used to retrieve ++ * the value of the CPR controller cpr_allowed_sw flag which ++ * indicates if closed-loop operation is enabled ++ * @data: Pointer to private data which is equal to the CPR ++ * controller pointer ++ * @val: Output parameter written with the value of ++ * cpr_allowed_sw ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_closed_loop_enable_get(void *data, u64 *val) ++{ ++ struct cpr3_controller *ctrl = data; ++ ++ *val = ctrl->cpr_allowed_sw; ++ ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_closed_loop_enable_fops, ++ cpr3_debug_closed_loop_enable_get, ++ cpr3_debug_closed_loop_enable_set, ++ "%llu\n"); ++ ++/** ++ * cpr3_debug_hw_closed_loop_enable_set() - debugfs callback used to change the ++ * value of the CPR controller use_hw_closed_loop flag which ++ * switches between software closed-loop and hardware closed-loop ++ * operation for CPR3 and CPR4 controllers and between open-loop ++ * and full hardware closed-loop operation for CPRh controllers. ++ * @data: Pointer to private data which is equal to the CPR ++ * controller pointer ++ * @val: New value for use_hw_closed_loop ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_hw_closed_loop_enable_set(void *data, u64 val) ++{ ++ struct cpr3_controller *ctrl = data; ++ bool use_hw_closed_loop = !!val; ++ struct cpr3_regulator *vreg; ++ bool cpr_enabled; ++ int i, j, k, rc; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (ctrl->use_hw_closed_loop == use_hw_closed_loop) ++ goto done; ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ ctrl->use_hw_closed_loop = use_hw_closed_loop; ++ ++ cpr_enabled = ctrl->cpr_enabled; ++ ++ /* Ensure that CPR clocks are enabled before writing to registers. */ ++ if (!cpr_enabled) { ++ rc = cpr3_clock_enable(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "clock enable failed, rc=%d\n", rc); ++ goto done; ++ } ++ ctrl->cpr_enabled = true; ++ } ++ ++ if (ctrl->use_hw_closed_loop) ++ cpr3_write(ctrl, CPR3_REG_IRQ_EN, 0); ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ cpr3_masked_write(ctrl, CPR4_REG_MARGIN_ADJ_CTL, ++ CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_EN_MASK, ++ ctrl->use_hw_closed_loop ++ ? CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_ENABLE ++ : CPR4_MARGIN_ADJ_CTL_HW_CLOSED_LOOP_DISABLE); ++ } else if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ cpr3_write(ctrl, CPR3_REG_HW_CLOSED_LOOP, ++ ctrl->use_hw_closed_loop ++ ? CPR3_HW_CLOSED_LOOP_ENABLE ++ : CPR3_HW_CLOSED_LOOP_DISABLE); ++ } ++ ++ /* Turn off CPR clocks if they were off before this function call. */ ++ if (!cpr_enabled) { ++ cpr3_clock_disable(ctrl); ++ ctrl->cpr_enabled = false; ++ } ++ ++ if (ctrl->use_hw_closed_loop && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ rc = regulator_enable(ctrl->vdd_limit_regulator); ++ if (rc) { ++ cpr3_err(ctrl, "CPR limit regulator enable failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } else if (!ctrl->use_hw_closed_loop ++ && ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ rc = regulator_disable(ctrl->vdd_limit_regulator); ++ if (rc) { ++ cpr3_err(ctrl, "CPR limit regulator disable failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ /* ++ * Due to APM and mem-acc floor restriction constraints, ++ * the closed-loop voltage may be different when using ++ * software closed-loop vs hardware closed-loop. Therefore, ++ * reset the cached closed-loop voltage for all corners to the ++ * corresponding open-loop voltage when switching between ++ * SW and HW closed-loop mode. ++ */ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ for (k = 0; k < vreg->corner_count; k++) ++ vreg->corner[k].last_volt ++ = vreg->corner[k].open_loop_volt; ++ } ++ } ++ ++ /* Skip last_volt caching */ ++ ctrl->last_corner_was_closed_loop = false; ++ ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not change CPR HW closed-loop enable state=%u, rc=%d\n", ++ use_hw_closed_loop, rc); ++ goto done; ++ } ++ ++ cpr3_debug(ctrl, "CPR mode=%s\n", ++ use_hw_closed_loop ? ++ "HW closed-loop" : "SW closed-loop"); ++done: ++ mutex_unlock(&ctrl->lock); ++ return 0; ++} ++ ++/** ++ * cpr3_debug_hw_closed_loop_enable_get() - debugfs callback used to retrieve ++ * the value of the CPR controller use_hw_closed_loop flag which ++ * indicates if hardware closed-loop operation is being used in ++ * place of software closed-loop operation ++ * @data: Pointer to private data which is equal to the CPR ++ * controller pointer ++ * @val: Output parameter written with the value of ++ * use_hw_closed_loop ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_hw_closed_loop_enable_get(void *data, u64 *val) ++{ ++ struct cpr3_controller *ctrl = data; ++ ++ *val = ctrl->use_hw_closed_loop; ++ ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_hw_closed_loop_enable_fops, ++ cpr3_debug_hw_closed_loop_enable_get, ++ cpr3_debug_hw_closed_loop_enable_set, ++ "%llu\n"); ++ ++/** ++ * cpr3_debug_trigger_aging_measurement_set() - debugfs callback used to trigger ++ * another CPR measurement ++ * @data: Pointer to private data which is equal to the CPR ++ * controller pointer ++ * @val: Unused ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_debug_trigger_aging_measurement_set(void *data, u64 val) ++{ ++ struct cpr3_controller *ctrl = data; ++ int rc; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ cpr3_regulator_set_aging_ref_adjustment(ctrl, INT_MAX); ++ ctrl->aging_required = true; ++ ctrl->aging_succeeded = false; ++ ctrl->aging_failed = false; ++ ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not update the CPR controller state, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++done: ++ mutex_unlock(&ctrl->lock); ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(cpr3_debug_trigger_aging_measurement_fops, ++ NULL, ++ cpr3_debug_trigger_aging_measurement_set, ++ "%llu\n"); ++ ++/** ++ * cpr3_regulator_debugfs_ctrl_add() - add debugfs files to expose configuration ++ * data for the CPR controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_debugfs_ctrl_add(struct cpr3_controller *ctrl) ++{ ++ struct dentry *temp, *aggr_dir; ++ int i; ++ ++ /* Add cpr3-regulator base directory if it isn't present already. */ ++ if (cpr3_debugfs_base == NULL) { ++ cpr3_debugfs_base = debugfs_create_dir("cpr3-regulator", NULL); ++ if (IS_ERR_OR_NULL(cpr3_debugfs_base)) { ++ cpr3_err(ctrl, "cpr3-regulator debugfs base directory creation failed\n"); ++ cpr3_debugfs_base = NULL; ++ return; ++ } ++ } ++ ++ ctrl->debugfs = debugfs_create_dir(ctrl->name, cpr3_debugfs_base); ++ if (IS_ERR_OR_NULL(ctrl->debugfs)) { ++ cpr3_err(ctrl, "cpr3-regulator controller debugfs directory creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_file("cpr_closed_loop_enable", S_IRUGO | S_IWUSR, ++ ctrl->debugfs, ctrl, ++ &cpr3_debug_closed_loop_enable_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "cpr_closed_loop_enable debugfs file creation failed\n"); ++ return; ++ } ++ ++ if (ctrl->supports_hw_closed_loop) { ++ temp = debugfs_create_file("use_hw_closed_loop", ++ S_IRUGO | S_IWUSR, ctrl->debugfs, ctrl, ++ &cpr3_debug_hw_closed_loop_enable_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "use_hw_closed_loop debugfs file creation failed\n"); ++ return; ++ } ++ } ++ ++ temp = debugfs_create_int("thread_count", S_IRUGO, ctrl->debugfs, ++ &ctrl->thread_count); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "thread_count debugfs file creation failed\n"); ++ return; ++ } ++ ++ if (ctrl->apm) { ++ temp = debugfs_create_int("apm_threshold_volt", S_IRUGO, ++ ctrl->debugfs, &ctrl->apm_threshold_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "apm_threshold_volt debugfs file creation failed\n"); ++ return; ++ } ++ } ++ ++ if (ctrl->aging_required || ctrl->aging_succeeded ++ || ctrl->aging_failed) { ++ temp = debugfs_create_int("aging_adj_volt", S_IRUGO, ++ ctrl->debugfs, &ctrl->aging_ref_adjust_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aging_adj_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_file("aging_succeeded", S_IRUGO, ++ ctrl->debugfs, &ctrl->aging_succeeded, &fops_bool_ro); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aging_succeeded debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_file("aging_failed", S_IRUGO, ++ ctrl->debugfs, &ctrl->aging_failed, &fops_bool_ro); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aging_failed debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_file("aging_trigger", S_IWUSR, ++ ctrl->debugfs, ctrl, ++ &cpr3_debug_trigger_aging_measurement_fops); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aging_trigger debugfs file creation failed\n"); ++ return; ++ } ++ } ++ ++ aggr_dir = debugfs_create_dir("max_aggregated_voltages", ctrl->debugfs); ++ if (IS_ERR_OR_NULL(aggr_dir)) { ++ cpr3_err(ctrl, "max_aggregated_voltages debugfs directory creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("floor_volt", S_IRUGO, aggr_dir, ++ &ctrl->aggr_corner.floor_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aggr floor_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("ceiling_volt", S_IRUGO, aggr_dir, ++ &ctrl->aggr_corner.ceiling_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aggr ceiling_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("open_loop_volt", S_IRUGO, aggr_dir, ++ &ctrl->aggr_corner.open_loop_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aggr open_loop_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ temp = debugfs_create_int("last_volt", S_IRUGO, aggr_dir, ++ &ctrl->aggr_corner.last_volt); ++ if (IS_ERR_OR_NULL(temp)) { ++ cpr3_err(ctrl, "aggr last_volt debugfs file creation failed\n"); ++ return; ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) ++ cpr3_regulator_debugfs_thread_add(&ctrl->thread[i]); ++} ++ ++/** ++ * cpr3_regulator_debugfs_ctrl_remove() - remove debugfs files for the CPR ++ * controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Note, this function must be called after the controller has been removed from ++ * cpr3_controller_list and while the cpr3_controller_list_mutex lock is held. ++ * ++ * Return: none ++ */ ++static void cpr3_regulator_debugfs_ctrl_remove(struct cpr3_controller *ctrl) ++{ ++ if (list_empty(&cpr3_controller_list)) { ++ debugfs_remove_recursive(cpr3_debugfs_base); ++ cpr3_debugfs_base = NULL; ++ } else { ++ debugfs_remove_recursive(ctrl->debugfs); ++ } ++} ++ ++/** ++ * cpr3_regulator_init_ctrl_data() - performs initialization of CPR controller ++ * elements ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_init_ctrl_data(struct cpr3_controller *ctrl) ++{ ++ /* Read the initial vdd voltage from hardware. */ ++ ctrl->aggr_corner.last_volt ++ = regulator_get_voltage(ctrl->vdd_regulator); ++ if (ctrl->aggr_corner.last_volt < 0) { ++ cpr3_err(ctrl, "regulator_get_voltage(vdd) failed, rc=%d\n", ++ ctrl->aggr_corner.last_volt); ++ return ctrl->aggr_corner.last_volt; ++ } ++ ctrl->aggr_corner.open_loop_volt = ctrl->aggr_corner.last_volt; ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_init_vreg_data() - performs initialization of common CPR3 ++ * regulator elements and validate aging configurations ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_init_vreg_data(struct cpr3_regulator *vreg) ++{ ++ int i, j; ++ bool init_aging; ++ ++ vreg->current_corner = CPR3_REGULATOR_CORNER_INVALID; ++ vreg->last_closed_loop_corner = CPR3_REGULATOR_CORNER_INVALID; ++ ++ init_aging = vreg->aging_allowed && vreg->thread->ctrl->aging_required; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ vreg->corner[i].last_volt = vreg->corner[i].open_loop_volt; ++ vreg->corner[i].irq_en = CPR3_IRQ_UP | CPR3_IRQ_DOWN; ++ ++ vreg->corner[i].ro_mask = 0; ++ for (j = 0; j < CPR3_RO_COUNT; j++) { ++ if (vreg->corner[i].target_quot[j] == 0) ++ vreg->corner[i].ro_mask |= BIT(j); ++ } ++ ++ if (init_aging) { ++ vreg->corner[i].unaged_floor_volt ++ = vreg->corner[i].floor_volt; ++ vreg->corner[i].unaged_ceiling_volt ++ = vreg->corner[i].ceiling_volt; ++ vreg->corner[i].unaged_open_loop_volt ++ = vreg->corner[i].open_loop_volt; ++ } ++ ++ if (vreg->aging_allowed) { ++ if (vreg->corner[i].unaged_floor_volt <= 0) { ++ cpr3_err(vreg, "invalid unaged_floor_volt[%d] = %d\n", ++ i, vreg->corner[i].unaged_floor_volt); ++ return -EINVAL; ++ } ++ if (vreg->corner[i].unaged_ceiling_volt <= 0) { ++ cpr3_err(vreg, "invalid unaged_ceiling_volt[%d] = %d\n", ++ i, vreg->corner[i].unaged_ceiling_volt); ++ return -EINVAL; ++ } ++ if (vreg->corner[i].unaged_open_loop_volt <= 0) { ++ cpr3_err(vreg, "invalid unaged_open_loop_volt[%d] = %d\n", ++ i, vreg->corner[i].unaged_open_loop_volt); ++ return -EINVAL; ++ } ++ } ++ } ++ ++ if (vreg->aging_allowed && vreg->corner[vreg->aging_corner].ceiling_volt ++ > vreg->thread->ctrl->aging_ref_volt) { ++ cpr3_err(vreg, "aging corner %d ceiling voltage = %d > aging ref voltage = %d uV\n", ++ vreg->aging_corner, ++ vreg->corner[vreg->aging_corner].ceiling_volt, ++ vreg->thread->ctrl->aging_ref_volt); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_suspend() - perform common required CPR3 power down steps ++ * before the system enters suspend ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_regulator_suspend(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ mutex_lock(&ctrl->lock); ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc); ++ mutex_unlock(&ctrl->lock); ++ return rc; ++ } ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ rc = cpr3_closed_loop_disable(ctrl); ++ if (rc) ++ cpr3_err(ctrl, "could not disable CPR, rc=%d\n", rc); ++ ++ ctrl->cpr_suspended = true; ++ ++ mutex_unlock(&ctrl->lock); ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_resume() - perform common required CPR3 power up steps after ++ * the system resumes from suspend ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_regulator_resume(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ mutex_lock(&ctrl->lock); ++ ++ ctrl->cpr_suspended = false; ++ rc = cpr3_regulator_update_ctrl_state(ctrl); ++ if (rc) ++ cpr3_err(ctrl, "could not enable CPR, rc=%d\n", rc); ++ ++ mutex_unlock(&ctrl->lock); ++ return 0; ++} ++ ++/** ++ * cpr3_regulator_validate_controller() - verify the data passed in via the ++ * cpr3_controller data structure ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_regulator_validate_controller(struct cpr3_controller *ctrl) ++{ ++ struct cpr3_thread *thread; ++ struct cpr3_regulator *vreg; ++ int i, j, allow_boost_vreg_count = 0; ++ ++ if (!ctrl->vdd_regulator) { ++ cpr3_err(ctrl, "vdd regulator missing\n"); ++ return -EINVAL; ++ } else if (ctrl->sensor_count <= 0 ++ || ctrl->sensor_count > CPR3_MAX_SENSOR_COUNT) { ++ cpr3_err(ctrl, "invalid CPR sensor count=%d\n", ++ ctrl->sensor_count); ++ return -EINVAL; ++ } else if (!ctrl->sensor_owner) { ++ cpr3_err(ctrl, "CPR sensor ownership table missing\n"); ++ return -EINVAL; ++ } ++ ++ if (ctrl->aging_required) { ++ for (i = 0; i < ctrl->aging_sensor_count; i++) { ++ if (ctrl->aging_sensor[i].sensor_id ++ >= ctrl->sensor_count) { ++ cpr3_err(ctrl, "aging_sensor[%d] id=%u is not in the value range 0-%d", ++ i, ctrl->aging_sensor[i].sensor_id, ++ ctrl->sensor_count - 1); ++ return -EINVAL; ++ } ++ } ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ thread = &ctrl->thread[i]; ++ for (j = 0; j < thread->vreg_count; j++) { ++ vreg = &thread->vreg[j]; ++ if (vreg->allow_boost) ++ allow_boost_vreg_count++; ++ } ++ } ++ ++ if (allow_boost_vreg_count > 1) { ++ /* ++ * Boost feature is not allowed to be used for more ++ * than one CPR3 regulator of a CPR3 controller. ++ */ ++ cpr3_err(ctrl, "Boost feature is enabled for more than one regulator\n"); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_panic_callback() - panic notification callback function. This function ++ * is invoked when a kernel panic occurs. ++ * @nfb: Notifier block pointer of CPR3 controller ++ * @event: Value passed unmodified to notifier function ++ * @data: Pointer passed unmodified to notifier function ++ * ++ * Return: NOTIFY_OK ++ */ ++static int cpr3_panic_callback(struct notifier_block *nfb, ++ unsigned long event, void *data) ++{ ++ struct cpr3_controller *ctrl = container_of(nfb, ++ struct cpr3_controller, panic_notifier); ++ struct cpr3_panic_regs_info *regs_info = ctrl->panic_regs_info; ++ struct cpr3_reg_info *reg; ++ int i = 0; ++ ++ for (i = 0; i < regs_info->reg_count; i++) { ++ reg = &(regs_info->regs[i]); ++ reg->value = readl_relaxed(reg->virt_addr); ++ pr_err("%s[0x%08x] = 0x%08x\n", reg->name, reg->addr, ++ reg->value); ++ } ++ /* ++ * Barrier to ensure that the information has been updated in the ++ * structure. ++ */ ++ mb(); ++ ++ return NOTIFY_OK; ++} ++ ++/** ++ * cpr3_regulator_register() - register the regulators for a CPR3 controller and ++ * perform CPR hardware initialization ++ * @pdev: Platform device pointer for the CPR3 controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_regulator_register(struct platform_device *pdev, ++ struct cpr3_controller *ctrl) ++{ ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ int i, j, rc; ++ ++ if (!dev->of_node) { ++ dev_err(dev, "%s: Device tree node is missing\n", __func__); ++ return -EINVAL; ++ } ++ ++ if (!ctrl || !ctrl->name) { ++ dev_err(dev, "%s: CPR controller data is missing\n", __func__); ++ return -EINVAL; ++ } ++ ++ rc = cpr3_regulator_validate_controller(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "controller validation failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ mutex_init(&ctrl->lock); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cpr_ctrl"); ++ if (!res || !res->start) { ++ cpr3_err(ctrl, "CPR controller address is missing\n"); ++ return -ENXIO; ++ } ++ ctrl->cpr_ctrl_base = devm_ioremap(dev, res->start, resource_size(res)); ++ ++ if (ctrl->aging_possible_mask) { ++ /* ++ * Aging possible register address is required if an aging ++ * possible mask has been specified. ++ */ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "aging_allowed"); ++ if (!res || !res->start) { ++ cpr3_err(ctrl, "CPR aging allowed address is missing\n"); ++ return -ENXIO; ++ } ++ ctrl->aging_possible_reg = devm_ioremap(dev, res->start, ++ resource_size(res)); ++ } ++ ++ ctrl->irq = platform_get_irq_byname(pdev, "cpr"); ++ if (ctrl->irq < 0) { ++ cpr3_err(ctrl, "missing CPR interrupt\n"); ++ return ctrl->irq; ++ } ++ ++ if (ctrl->supports_hw_closed_loop) { ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ ctrl->ceiling_irq = platform_get_irq_byname(pdev, ++ "ceiling"); ++ if (ctrl->ceiling_irq < 0) { ++ cpr3_err(ctrl, "missing ceiling interrupt\n"); ++ return ctrl->ceiling_irq; ++ } ++ } ++ } ++ ++ rc = cpr3_regulator_init_ctrl_data(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "CPR controller data initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ rc = cpr3_regulator_init_vreg_data( ++ &ctrl->thread[i].vreg[j]); ++ if (rc) ++ return rc; ++ cpr3_print_quots(&ctrl->thread[i].vreg[j]); ++ } ++ } ++ ++ /* ++ * Add the maximum possible aging voltage margin until it is possible ++ * to perform an aging measurement. ++ */ ++ if (ctrl->aging_required) ++ cpr3_regulator_set_aging_ref_adjustment(ctrl, INT_MAX); ++ ++ rc = cpr3_regulator_init_ctrl(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "CPR controller initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ /* Register regulator devices for all threads. */ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ rc = cpr3_regulator_vreg_register( ++ &ctrl->thread[i].vreg[j]); ++ if (rc) { ++ cpr3_err(&ctrl->thread[i].vreg[j], "failed to register regulator, rc=%d\n", ++ rc); ++ goto free_regulators; ++ } ++ } ++ } ++ ++ rc = devm_request_threaded_irq(dev, ctrl->irq, NULL, ++ cpr3_irq_handler, ++ IRQF_ONESHOT | ++ IRQF_TRIGGER_RISING, ++ "cpr3", ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not request IRQ %d, rc=%d\n", ++ ctrl->irq, rc); ++ goto free_regulators; ++ } ++ ++ if (ctrl->supports_hw_closed_loop && ++ ctrl->ctrl_type == CPR_CTRL_TYPE_CPR3) { ++ rc = devm_request_threaded_irq(dev, ctrl->ceiling_irq, NULL, ++ cpr3_ceiling_irq_handler, ++ IRQF_ONESHOT | IRQF_TRIGGER_RISING, ++ "cpr3_ceiling", ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "could not request ceiling IRQ %d, rc=%d\n", ++ ctrl->ceiling_irq, rc); ++ goto free_regulators; ++ } ++ } ++ ++ mutex_lock(&cpr3_controller_list_mutex); ++ cpr3_regulator_debugfs_ctrl_add(ctrl); ++ list_add(&ctrl->list, &cpr3_controller_list); ++ mutex_unlock(&cpr3_controller_list_mutex); ++ ++ if (ctrl->panic_regs_info) { ++ /* Register panic notification call back */ ++ ctrl->panic_notifier.notifier_call = cpr3_panic_callback; ++ atomic_notifier_chain_register(&panic_notifier_list, ++ &ctrl->panic_notifier); ++ } ++ ++ return 0; ++ ++free_regulators: ++ for (i = 0; i < ctrl->thread_count; i++) ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) ++ if (!IS_ERR_OR_NULL(ctrl->thread[i].vreg[j].rdev)) ++ regulator_unregister( ++ ctrl->thread[i].vreg[j].rdev); ++ return rc; ++} ++ ++/** ++ * cpr3_open_loop_regulator_register() - register the regulators for a CPR3 ++ * controller which will always work in Open loop and ++ * won't support close loop. ++ * @pdev: Platform device pointer for the CPR3 controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_open_loop_regulator_register(struct platform_device *pdev, ++ struct cpr3_controller *ctrl) ++{ ++ struct device *dev = &pdev->dev; ++ struct cpr3_regulator *vreg; ++ int i, j, rc; ++ ++ if (!dev->of_node) { ++ dev_err(dev, "%s: Device tree node is missing\n", __func__); ++ return -EINVAL; ++ } ++ ++ if (!ctrl || !ctrl->name) { ++ dev_err(dev, "%s: CPR controller data is missing\n", __func__); ++ return -EINVAL; ++ } ++ ++ if (!ctrl->vdd_regulator) { ++ cpr3_err(ctrl, "vdd regulator missing\n"); ++ return -EINVAL; ++ } ++ ++ mutex_init(&ctrl->lock); ++ ++ rc = cpr3_regulator_init_ctrl_data(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "CPR controller data initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ vreg = &ctrl->thread[i].vreg[j]; ++ vreg->corner[i].last_volt = ++ vreg->corner[i].open_loop_volt; ++ } ++ } ++ ++ /* Register regulator devices for all threads. */ ++ for (i = 0; i < ctrl->thread_count; i++) { ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) { ++ rc = cpr3_regulator_vreg_register( ++ &ctrl->thread[i].vreg[j]); ++ if (rc) { ++ cpr3_err(&ctrl->thread[i].vreg[j], "failed to register regulator, rc=%d\n", ++ rc); ++ goto free_regulators; ++ } ++ } ++ } ++ ++ mutex_lock(&cpr3_controller_list_mutex); ++ list_add(&ctrl->list, &cpr3_controller_list); ++ mutex_unlock(&cpr3_controller_list_mutex); ++ ++ return 0; ++ ++free_regulators: ++ for (i = 0; i < ctrl->thread_count; i++) ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) ++ if (!IS_ERR_OR_NULL(ctrl->thread[i].vreg[j].rdev)) ++ regulator_unregister( ++ ctrl->thread[i].vreg[j].rdev); ++ return rc; ++} ++ ++/** ++ * cpr3_regulator_unregister() - unregister the regulators for a CPR3 controller ++ * and perform CPR hardware shutdown ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_regulator_unregister(struct cpr3_controller *ctrl) ++{ ++ int i, j, rc = 0; ++ ++ mutex_lock(&cpr3_controller_list_mutex); ++ list_del(&ctrl->list); ++ cpr3_regulator_debugfs_ctrl_remove(ctrl); ++ mutex_unlock(&cpr3_controller_list_mutex); ++ ++ if (ctrl->ctrl_type == CPR_CTRL_TYPE_CPR4) { ++ rc = cpr3_ctrl_clear_cpr4_config(ctrl); ++ if (rc) ++ cpr3_err(ctrl, "failed to clear CPR4 configuration,rc=%d\n", ++ rc); ++ } ++ ++ cpr3_ctrl_loop_disable(ctrl); ++ ++ cpr3_closed_loop_disable(ctrl); ++ ++ if (ctrl->vdd_limit_regulator) { ++ regulator_disable(ctrl->vdd_limit_regulator); ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) ++ regulator_unregister(ctrl->thread[i].vreg[j].rdev); ++ ++ if (ctrl->panic_notifier.notifier_call) ++ atomic_notifier_chain_unregister(&panic_notifier_list, ++ &ctrl->panic_notifier); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_open_loop_regulator_unregister() - unregister the regulators for a CPR3 ++ * open loop controller and perform CPR hardware shutdown ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_open_loop_regulator_unregister(struct cpr3_controller *ctrl) ++{ ++ int i, j; ++ ++ mutex_lock(&cpr3_controller_list_mutex); ++ list_del(&ctrl->list); ++ mutex_unlock(&cpr3_controller_list_mutex); ++ ++ if (ctrl->vdd_limit_regulator) { ++ regulator_disable(ctrl->vdd_limit_regulator); ++ } ++ ++ for (i = 0; i < ctrl->thread_count; i++) ++ for (j = 0; j < ctrl->thread[i].vreg_count; j++) ++ regulator_unregister(ctrl->thread[i].vreg[j].rdev); ++ ++ if (ctrl->panic_notifier.notifier_call) ++ atomic_notifier_chain_unregister(&panic_notifier_list, ++ &ctrl->panic_notifier); ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/regulator/cpr3-regulator.h +@@ -0,0 +1,1211 @@ ++/* ++ * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef __REGULATOR_CPR3_REGULATOR_H__ ++#define __REGULATOR_CPR3_REGULATOR_H__ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct cpr3_controller; ++struct cpr3_thread; ++ ++/** ++ * struct cpr3_fuse_param - defines one contiguous segment of a fuse parameter ++ * that is contained within a given row. ++ * @row: Fuse row number ++ * @bit_start: The first bit within the row of the fuse parameter segment ++ * @bit_end: The last bit within the row of the fuse parameter segment ++ * ++ * Each fuse row is 64 bits in length. bit_start and bit_end may take values ++ * from 0 to 63. bit_start must be less than or equal to bit_end. ++ */ ++struct cpr3_fuse_param { ++ unsigned row; ++ unsigned bit_start; ++ unsigned bit_end; ++}; ++ ++/* Each CPR3 sensor has 16 ring oscillators */ ++#define CPR3_RO_COUNT 16 ++ ++/* The maximum number of sensors that can be present on a single CPR loop. */ ++#define CPR3_MAX_SENSOR_COUNT 256 ++ ++/* This constant is used when allocating array printing buffers. */ ++#define MAX_CHARS_PER_INT 10 ++ ++/** ++ * struct cpr4_sdelta - CPR4 controller specific data structure for the sdelta ++ * adjustment table which is used to adjust the VDD supply ++ * voltage automatically based upon the temperature and/or ++ * the number of online CPU cores. ++ * @allow_core_count_adj: Core count adjustments are allowed. ++ * @allow_temp_adj: Temperature based adjustments are allowed. ++ * @max_core_count: Maximum number of cores considered for core count ++ * adjustment logic. ++ * @temp_band_count: Number of temperature bands considered for temperature ++ * based adjustment logic. ++ * @cap_volt: CAP in uV to apply to SDELTA margins with multiple ++ * cpr3-regulators defined for single controller. ++ * @table: SDELTA table with per-online-core and temperature based ++ * adjustments of size (max_core_count * temp_band_count) ++ * Outer: core count ++ * Inner: temperature band ++ * Each element has units of VDD supply steps. Positive ++ * values correspond to a reduction in voltage and negative ++ * value correspond to an increase (this follows the SDELTA ++ * register semantics). ++ * @allow_boost: Voltage boost allowed. ++ * @boost_num_cores: The number of online cores at which the boost voltage ++ * adjustments will be applied ++ * @boost_table: SDELTA table with boost voltage adjustments of size ++ * temp_band_count. Each element has units of VDD supply ++ * steps. Positive values correspond to a reduction in ++ * voltage and negative value correspond to an increase ++ * (this follows the SDELTA register semantics). ++ */ ++struct cpr4_sdelta { ++ bool allow_core_count_adj; ++ bool allow_temp_adj; ++ int max_core_count; ++ int temp_band_count; ++ int cap_volt; ++ int *table; ++ bool allow_boost; ++ int boost_num_cores; ++ int *boost_table; ++}; ++ ++/** ++ * struct cpr3_corner - CPR3 virtual voltage corner data structure ++ * @floor_volt: CPR closed-loop floor voltage in microvolts ++ * @ceiling_volt: CPR closed-loop ceiling voltage in microvolts ++ * @open_loop_volt: CPR open-loop voltage (i.e. initial voltage) in ++ * microvolts ++ * @last_volt: Last known settled CPR closed-loop voltage which is used ++ * when switching to a new corner ++ * @abs_ceiling_volt: The absolute CPR closed-loop ceiling voltage in ++ * microvolts. This is used to limit the ceiling_volt ++ * value when it is increased as a result of aging ++ * adjustment. ++ * @unaged_floor_volt: The CPR closed-loop floor voltage in microvolts before ++ * any aging adjustment is performed ++ * @unaged_ceiling_volt: The CPR closed-loop ceiling voltage in microvolts ++ * before any aging adjustment is performed ++ * @unaged_open_loop_volt: The CPR open-loop voltage (i.e. initial voltage) in ++ * microvolts before any aging adjusment is performed ++ * @system_volt: The system-supply voltage in microvolts or corners or ++ * levels ++ * @mem_acc_volt: The mem-acc-supply voltage in corners ++ * @proc_freq: Processor frequency in Hertz. For CPR rev. 3 and 4 ++ * conrollers, this field is only used by platform specific ++ * CPR3 driver for interpolation. For CPRh-compliant ++ * controllers, this frequency is also utilized by the ++ * clock driver to determine the corner to CPU clock ++ * frequency mappings. ++ * @cpr_fuse_corner: Fused corner index associated with this virtual corner ++ * (only used by platform specific CPR3 driver for ++ * mapping purposes) ++ * @target_quot: Array of target quotient values to use for each ring ++ * oscillator (RO) for this corner. A value of 0 should be ++ * specified as the target quotient for each RO that is ++ * unused by this corner. ++ * @ro_scale: Array of CPR ring oscillator (RO) scaling factors. The ++ * scaling factor for each RO is defined from RO0 to RO15 ++ * with units of QUOT/V. A value of 0 may be specified for ++ * an RO that is unused. ++ * @ro_mask: Bitmap where each of the 16 LSBs indicate if the ++ * corresponding ROs should be masked for this corner ++ * @irq_en: Bitmap of the CPR interrupts to enable for this corner ++ * @aging_derate: The amount to derate the aging voltage adjustment ++ * determined for the reference corner in units of uV/mV. ++ * E.g. a value of 900 would imply that the adjustment for ++ * this corner should be 90% (900/1000) of that for the ++ * reference corner. ++ * @use_open_loop: Boolean indicating that open-loop (i.e CPR disabled) as ++ * opposed to closed-loop operation must be used for this ++ * corner on CPRh controllers. ++ * @sdelta: The CPR4 controller specific data for this corner. This ++ * field is applicable for CPR4 controllers. ++ * ++ * The value of last_volt is initialized inside of the cpr3_regulator_register() ++ * call with the open_loop_volt value. It can later be updated to the settled ++ * VDD supply voltage. The values for unaged_floor_volt, unaged_ceiling_volt, ++ * and unaged_open_loop_volt are initialized inside of cpr3_regulator_register() ++ * if ctrl->aging_required == true. These three values must be pre-initialized ++ * if cpr3_regulator_register() is called with ctrl->aging_required == false and ++ * ctrl->aging_succeeded == true. ++ * ++ * The values of ro_mask and irq_en are initialized inside of the ++ * cpr3_regulator_register() call. ++ */ ++struct cpr3_corner { ++ int floor_volt; ++ int ceiling_volt; ++ int cold_temp_open_loop_volt; ++ int normal_temp_open_loop_volt; ++ int open_loop_volt; ++ int last_volt; ++ int abs_ceiling_volt; ++ int unaged_floor_volt; ++ int unaged_ceiling_volt; ++ int unaged_open_loop_volt; ++ int system_volt; ++ int mem_acc_volt; ++ u32 proc_freq; ++ int cpr_fuse_corner; ++ u32 target_quot[CPR3_RO_COUNT]; ++ u32 ro_scale[CPR3_RO_COUNT]; ++ u32 ro_mask; ++ u32 irq_en; ++ int aging_derate; ++ bool use_open_loop; ++ struct cpr4_sdelta *sdelta; ++}; ++ ++/** ++ * struct cprh_corner_band - CPRh controller specific data structure which ++ * encapsulates the range of corners and the SDELTA ++ * adjustment table to be applied to the corners within ++ * the min and max bounds of the corner band. ++ * @corner: Corner number which defines the corner band boundary ++ * @sdelta: The SDELTA adjustment table which contains core-count ++ * and temp based margin adjustments that are applicable ++ * to the corner band. ++ */ ++struct cprh_corner_band { ++ int corner; ++ struct cpr4_sdelta *sdelta; ++}; ++ ++/** ++ * struct cpr3_fuse_parameters - CPR4 fuse specific data structure which has ++ * the required fuse parameters need for Close Loop CPR ++ * @(*apss_ro_sel_param)[2]: Pointer to RO select fuse details ++ * @(*apss_init_voltage_param)[2]: Pointer to Target voltage fuse details ++ * @(*apss_target_quot_param)[2]: Pointer to Target quot fuse details ++ * @(*apss_quot_offset_param)[2]: Pointer to quot offset fuse details ++ * @cpr_fusing_rev_param: Pointer to CPR revision fuse details ++ * @apss_speed_bin_param: Pointer to Speed bin fuse details ++ * @cpr_boost_fuse_cfg_param: Pointer to Boost fuse cfg details ++ * @apss_boost_fuse_volt_param: Pointer to Boost fuse volt details ++ * @misc_fuse_volt_adj_param: Pointer to Misc fuse volt fuse details ++ */ ++struct cpr3_fuse_parameters { ++ struct cpr3_fuse_param (*apss_ro_sel_param)[2]; ++ struct cpr3_fuse_param (*apss_init_voltage_param)[2]; ++ struct cpr3_fuse_param (*apss_target_quot_param)[2]; ++ struct cpr3_fuse_param (*apss_quot_offset_param)[2]; ++ struct cpr3_fuse_param *cpr_fusing_rev_param; ++ struct cpr3_fuse_param *apss_speed_bin_param; ++ struct cpr3_fuse_param *cpr_boost_fuse_cfg_param; ++ struct cpr3_fuse_param *apss_boost_fuse_volt_param; ++ struct cpr3_fuse_param *misc_fuse_volt_adj_param; ++}; ++ ++struct cpr4_mem_acc_func { ++ void (*set_mem_acc)(struct regulator_dev *); ++ void (*clear_mem_acc)(struct regulator_dev *); ++}; ++ ++/** ++ * struct cpr4_reg_data - CPR4 regulator specific data structure which is ++ * target specific ++ * @cpr_valid_fuse_count: Number of valid fuse corners ++ * @fuse_ref_volt: Pointer to fuse reference voltage ++ * @fuse_step_volt: CPR step voltage available in fuse ++ * @cpr_clk_rate: CPR clock rate ++ * @boost_fuse_ref_volt: Boost fuse reference voltage ++ * @boost_ceiling_volt: Boost ceiling voltage ++ * @boost_floor_volt: Boost floor voltage ++ * @cpr3_fuse_params: Pointer to CPR fuse parameters ++ * @mem_acc_funcs: Pointer to MEM ACC set/clear functions ++ **/ ++struct cpr4_reg_data { ++ u32 cpr_valid_fuse_count; ++ int *fuse_ref_volt; ++ u32 fuse_step_volt; ++ u32 cpr_clk_rate; ++ int boost_fuse_ref_volt; ++ int boost_ceiling_volt; ++ int boost_floor_volt; ++ struct cpr3_fuse_parameters *cpr3_fuse_params; ++ struct cpr4_mem_acc_func *mem_acc_funcs; ++}; ++/** ++ * struct cpr3_reg_data - CPR3 regulator specific data structure which is ++ * target specific ++ * @cpr_valid_fuse_count: Number of valid fuse corners ++ * @(*init_voltage_param)[2]: Pointer to Target voltage fuse details ++ * @fuse_ref_volt: Pointer to fuse reference voltage ++ * @fuse_step_volt: CPR step voltage available in fuse ++ * @cpr_clk_rate: CPR clock rate ++ * @cpr3_fuse_params: Pointer to CPR fuse parameters ++ **/ ++struct cpr3_reg_data { ++ u32 cpr_valid_fuse_count; ++ struct cpr3_fuse_param (*init_voltage_param)[2]; ++ int *fuse_ref_volt; ++ u32 fuse_step_volt; ++ u32 cpr_clk_rate; ++}; ++ ++/** ++ * struct cpr3_regulator - CPR3 logical regulator instance associated with a ++ * given CPR3 hardware thread ++ * @of_node: Device node associated with the device tree child node ++ * of this CPR3 regulator ++ * @thread: Pointer to the CPR3 thread which manages this CPR3 ++ * regulator ++ * @name: Unique name for this CPR3 regulator which is filled ++ * using the device tree regulator-name property ++ * @rdesc: Regulator description for this CPR3 regulator ++ * @rdev: Regulator device pointer for the regulator registered ++ * for this CPR3 regulator ++ * @mem_acc_regulator: Pointer to the optional mem-acc supply regulator used ++ * to manage memory circuitry settings based upon CPR3 ++ * regulator output voltage. ++ * @corner: Array of all corners supported by this CPR3 regulator ++ * @corner_count: The number of elements in the corner array ++ * @corner_band: Array of all corner bands supported by CPRh compatible ++ * controllers ++ * @cpr4_regulator_data Target specific cpr4 regulator data ++ * @cpr3_regulator_data Target specific cpr3 regulator data ++ * @corner_band_count: The number of elements in the corner band array ++ * @platform_fuses: Pointer to platform specific CPR fuse data (only used by ++ * platform specific CPR3 driver) ++ * @speed_bin_fuse: Value read from the speed bin fuse parameter ++ * @speed_bins_supported: The number of speed bins supported by the device tree ++ * configuration for this CPR3 regulator ++ * @cpr_rev_fuse: Value read from the CPR fusing revision fuse parameter ++ * @fuse_combo: Platform specific enum value identifying the specific ++ * combination of fuse values found on a given chip ++ * @fuse_combos_supported: The number of fuse combinations supported by the ++ * device tree configuration for this CPR3 regulator ++ * @fuse_corner_count: Number of corners defined by fuse parameters ++ * @fuse_corner_map: Array of length fuse_corner_count which specifies the ++ * highest corner associated with each fuse corner. Note ++ * that each element must correspond to a valid corner ++ * and that element values must be strictly increasing. ++ * Also, it is acceptable for the lowest fuse corner to map ++ * to a corner other than the lowest. Likewise, it is ++ * acceptable for the highest fuse corner to map to a ++ * corner other than the highest. ++ * @fuse_combo_corner_sum: The sum of the corner counts across all fuse combos ++ * @fuse_combo_offset: The device tree property array offset for the selected ++ * fuse combo ++ * @speed_bin_corner_sum: The sum of the corner counts across all speed bins ++ * This may be specified as 0 if per speed bin parsing ++ * support is not required. ++ * @speed_bin_offset: The device tree property array offset for the selected ++ * speed bin ++ * @fuse_combo_corner_band_sum: The sum of the corner band counts across all ++ * fuse combos ++ * @fuse_combo_corner_band_offset: The device tree property array offset for ++ * the corner band count corresponding to the selected ++ * fuse combo ++ * @speed_bin_corner_band_sum: The sum of the corner band counts across all ++ * speed bins. This may be specified as 0 if per speed bin ++ * parsing support is not required ++ * @speed_bin_corner_band_offset: The device tree property array offset for the ++ * corner band count corresponding to the selected speed ++ * bin ++ * @pd_bypass_mask: Bit mask of power domains associated with this CPR3 ++ * regulator ++ * @dynamic_floor_corner: Index identifying the voltage corner for the CPR3 ++ * regulator whose last_volt value should be used as the ++ * global CPR floor voltage if all of the power domains ++ * associated with this CPR3 regulator are bypassed ++ * @uses_dynamic_floor: Boolean flag indicating that dynamic_floor_corner should ++ * be utilized for the CPR3 regulator ++ * @current_corner: Index identifying the currently selected voltage corner ++ * for the CPR3 regulator or less than 0 if no corner has ++ * been requested ++ * @last_closed_loop_corner: Index identifying the last voltage corner for the ++ * CPR3 regulator which was configured when operating in ++ * CPR closed-loop mode or less than 0 if no corner has ++ * been requested. CPR registers are only written to when ++ * using closed-loop mode. ++ * @aggregated: Boolean flag indicating that this CPR3 regulator ++ * participated in the last aggregation event ++ * @debug_corner: Index identifying voltage corner used for displaying ++ * corner configuration values in debugfs ++ * @vreg_enabled: Boolean defining the enable state of the CPR3 ++ * regulator's regulator within the regulator framework. ++ * @aging_allowed: Boolean defining if CPR aging adjustments are allowed ++ * for this CPR3 regulator given the fuse combo of the ++ * device ++ * @aging_allow_open_loop_adj: Boolean defining if the open-loop voltage of each ++ * corner of this regulator should be adjusted as a result ++ * of an aging measurement. This flag can be set to false ++ * when the open-loop voltage adjustments have been ++ * specified such that they include the maximum possible ++ * aging adjustment. This flag is only used if ++ * aging_allowed == true. ++ * @aging_corner: The corner that should be configured for this regulator ++ * when an aging measurement is performed. ++ * @aging_max_adjust_volt: The maximum aging voltage margin in microvolts that ++ * may be added to the target quotients of this regulator. ++ * A value of 0 may be specified if this regulator does not ++ * require any aging adjustment. ++ * @allow_core_count_adj: Core count adjustments are allowed for this regulator. ++ * @allow_temp_adj: Temperature based adjustments are allowed for this ++ * regulator. ++ * @max_core_count: Maximum number of cores considered for core count ++ * adjustment logic. ++ * @allow_boost: Voltage boost allowed for this regulator. ++ * ++ * This structure contains both configuration and runtime state data. The ++ * elements current_corner, last_closed_loop_corner, aggregated, debug_corner, ++ * and vreg_enabled are state variables. ++ */ ++struct cpr3_regulator { ++ struct device_node *of_node; ++ struct cpr3_thread *thread; ++ const char *name; ++ struct regulator_desc rdesc; ++ struct regulator_dev *rdev; ++ struct regulator *mem_acc_regulator; ++ struct cpr3_corner *corner; ++ int corner_count; ++ struct cprh_corner_band *corner_band; ++ struct cpr4_reg_data *cpr4_regulator_data; ++ struct cpr3_reg_data *cpr3_regulator_data; ++ u32 corner_band_count; ++ ++ void *platform_fuses; ++ int speed_bin_fuse; ++ int speed_bins_supported; ++ int cpr_rev_fuse; ++ int part_type; ++ int part_type_supported; ++ int fuse_combo; ++ int fuse_combos_supported; ++ int fuse_corner_count; ++ int *fuse_corner_map; ++ int fuse_combo_corner_sum; ++ int fuse_combo_offset; ++ int speed_bin_corner_sum; ++ int speed_bin_offset; ++ int fuse_combo_corner_band_sum; ++ int fuse_combo_corner_band_offset; ++ int speed_bin_corner_band_sum; ++ int speed_bin_corner_band_offset; ++ u32 pd_bypass_mask; ++ int dynamic_floor_corner; ++ bool uses_dynamic_floor; ++ ++ int current_corner; ++ int last_closed_loop_corner; ++ bool aggregated; ++ int debug_corner; ++ bool vreg_enabled; ++ ++ bool aging_allowed; ++ bool aging_allow_open_loop_adj; ++ int aging_corner; ++ int aging_max_adjust_volt; ++ ++ bool allow_core_count_adj; ++ bool allow_temp_adj; ++ int max_core_count; ++ bool allow_boost; ++}; ++ ++/** ++ * struct cpr3_thread - CPR3 hardware thread data structure ++ * @thread_id: Hardware thread ID ++ * @of_node: Device node associated with the device tree child node ++ * of this CPR3 thread ++ * @ctrl: Pointer to the CPR3 controller which manages this thread ++ * @vreg: Array of CPR3 regulators handled by the CPR3 thread ++ * @vreg_count: Number of elements in the vreg array ++ * @aggr_corner: CPR corner containing the in process aggregated voltage ++ * and target quotient configurations which will be applied ++ * @last_closed_loop_aggr_corner: CPR corner containing the most recent ++ * configurations which were written into hardware ++ * registers when operating in closed loop mode (i.e. with ++ * CPR enabled) ++ * @consecutive_up: The number of consecutive CPR step up events needed to ++ * to trigger an up interrupt ++ * @consecutive_down: The number of consecutive CPR step down events needed to ++ * to trigger a down interrupt ++ * @up_threshold: The number CPR error steps required to generate an up ++ * event ++ * @down_threshold: The number CPR error steps required to generate a down ++ * event ++ * ++ * This structure contains both configuration and runtime state data. The ++ * elements aggr_corner and last_closed_loop_aggr_corner are state variables. ++ */ ++struct cpr3_thread { ++ u32 thread_id; ++ struct device_node *of_node; ++ struct cpr3_controller *ctrl; ++ struct cpr3_regulator *vreg; ++ int vreg_count; ++ struct cpr3_corner aggr_corner; ++ struct cpr3_corner last_closed_loop_aggr_corner; ++ ++ u32 consecutive_up; ++ u32 consecutive_down; ++ u32 up_threshold; ++ u32 down_threshold; ++}; ++ ++/* Per CPR controller data */ ++/** ++ * enum cpr3_mem_acc_corners - Constants which define the number of mem-acc ++ * regulator corners available in the mem-acc corner map array. ++ * %CPR3_MEM_ACC_LOW_CORNER: Index in mem-acc corner map array mapping to the ++ * mem-acc regulator corner ++ * to be used for low voltage vdd supply ++ * %CPR3_MEM_ACC_HIGH_CORNER: Index in mem-acc corner map array mapping to the ++ * mem-acc regulator corner to be used for high ++ * voltage vdd supply ++ * %CPR3_MEM_ACC_CORNERS: Number of elements in the mem-acc corner map ++ * array ++ */ ++enum cpr3_mem_acc_corners { ++ CPR3_MEM_ACC_LOW_CORNER = 0, ++ CPR3_MEM_ACC_HIGH_CORNER = 1, ++ CPR3_MEM_ACC_CORNERS = 2, ++}; ++ ++/** ++ * enum cpr3_count_mode - CPR3 controller count mode which defines the ++ * method that CPR sensor data is acquired ++ * %CPR3_COUNT_MODE_ALL_AT_ONCE_MIN: Capture all CPR sensor readings ++ * simultaneously and report the minimum ++ * value seen in successive measurements ++ * %CPR3_COUNT_MODE_ALL_AT_ONCE_MAX: Capture all CPR sensor readings ++ * simultaneously and report the maximum ++ * value seen in successive measurements ++ * %CPR3_COUNT_MODE_STAGGERED: Read one sensor at a time in a ++ * sequential fashion ++ * %CPR3_COUNT_MODE_ALL_AT_ONCE_AGE: Capture all CPR aging sensor readings ++ * simultaneously. ++ */ ++enum cpr3_count_mode { ++ CPR3_COUNT_MODE_ALL_AT_ONCE_MIN = 0, ++ CPR3_COUNT_MODE_ALL_AT_ONCE_MAX = 1, ++ CPR3_COUNT_MODE_STAGGERED = 2, ++ CPR3_COUNT_MODE_ALL_AT_ONCE_AGE = 3, ++}; ++ ++/** ++ * enum cpr_controller_type - supported CPR controller hardware types ++ * %CPR_CTRL_TYPE_CPR3: HW has CPR3 controller ++ * %CPR_CTRL_TYPE_CPR4: HW has CPR4 controller ++ */ ++enum cpr_controller_type { ++ CPR_CTRL_TYPE_CPR3, ++ CPR_CTRL_TYPE_CPR4, ++}; ++ ++/** ++ * cpr_setting - supported CPR global settings ++ * %CPR_DEFAULT: default mode from dts will be used ++ * %CPR_DISABLED: ceiling voltage will be used for all the corners ++ * %CPR_OPEN_LOOP_EN: CPR will work in OL ++ * %CPR_CLOSED_LOOP_EN: CPR will work in CL, if supported ++ */ ++enum cpr_setting { ++ CPR_DEFAULT = 0, ++ CPR_DISABLED = 1, ++ CPR_OPEN_LOOP_EN = 2, ++ CPR_CLOSED_LOOP_EN = 3, ++}; ++ ++/** ++ * struct cpr3_aging_sensor_info - CPR3 aging sensor information ++ * @sensor_id The index of the CPR3 sensor to be used in the aging ++ * measurement. ++ * @ro_scale The CPR ring oscillator (RO) scaling factor for the ++ * aging sensor with units of QUOT/V. ++ * @init_quot_diff: The fused quotient difference between aged and un-aged ++ * paths that was measured at manufacturing time. ++ * @measured_quot_diff: The quotient difference measured at runtime. ++ * @bypass_mask: Bit mask of the CPR sensors that must be bypassed during ++ * the aging measurement for this sensor ++ * ++ * This structure contains both configuration and runtime state data. The ++ * element measured_quot_diff is a state variable. ++ */ ++struct cpr3_aging_sensor_info { ++ u32 sensor_id; ++ u32 ro_scale; ++ int init_quot_diff; ++ int measured_quot_diff; ++ u32 bypass_mask[CPR3_MAX_SENSOR_COUNT / 32]; ++}; ++ ++/** ++ * struct cpr3_reg_info - Register information data structure ++ * @name: Register name ++ * @addr: Register physical address ++ * @value: Register content ++ * @virt_addr: Register virtual address ++ * ++ * This data structure is used to dump some critical register contents ++ * when the device crashes due to a kernel panic. ++ */ ++struct cpr3_reg_info { ++ const char *name; ++ u32 addr; ++ u32 value; ++ void __iomem *virt_addr; ++}; ++ ++/** ++ * struct cpr3_panic_regs_info - Data structure to dump critical register ++ * contents. ++ * @reg_count: Number of elements in the regs array ++ * @regs: Array of critical registers information ++ * ++ * This data structure is used to dump critical register contents when ++ * the device crashes due to a kernel panic. ++ */ ++struct cpr3_panic_regs_info { ++ int reg_count; ++ struct cpr3_reg_info *regs; ++}; ++ ++/** ++ * struct cpr3_controller - CPR3 controller data structure ++ * @dev: Device pointer for the CPR3 controller device ++ * @name: Unique name for the CPR3 controller ++ * @ctrl_id: Controller ID corresponding to the VDD supply number ++ * that this CPR3 controller manages. ++ * @cpr_ctrl_base: Virtual address of the CPR3 controller base register ++ * @fuse_base: Virtual address of fuse row 0 ++ * @aging_possible_reg: Virtual address of an optional platform-specific ++ * register that must be ready to determine if it is ++ * possible to perform an aging measurement. ++ * @list: list head used in a global cpr3-regulator list so that ++ * cpr3-regulator structs can be found easily in RAM dumps ++ * @thread: Array of CPR3 threads managed by the CPR3 controller ++ * @thread_count: Number of elements in the thread array ++ * @sensor_owner: Array of thread IDs indicating which thread owns a given ++ * CPR sensor ++ * @sensor_count: The number of CPR sensors found on the CPR loop managed ++ * by this CPR controller. Must be equal to the number of ++ * elements in the sensor_owner array ++ * @soc_revision: Revision number of the SoC. This may be unused by ++ * platforms that do not have different behavior for ++ * different SoC revisions. ++ * @lock: Mutex lock used to ensure mutual exclusion between ++ * all of the threads associated with the controller ++ * @vdd_regulator: Pointer to the VDD supply regulator which this CPR3 ++ * controller manages ++ * @system_regulator: Pointer to the optional system-supply regulator upon ++ * which the VDD supply regulator depends. ++ * @mem_acc_regulator: Pointer to the optional mem-acc supply regulator used ++ * to manage memory circuitry settings based upon the ++ * VDD supply output voltage. ++ * @vdd_limit_regulator: Pointer to the VDD supply limit regulator which is used ++ * for hardware closed-loop in order specify ceiling and ++ * floor voltage limits (platform specific) ++ * @system_supply_max_volt: Voltage in microvolts which corresponds to the ++ * absolute ceiling voltage of the system-supply ++ * @mem_acc_threshold_volt: mem-acc threshold voltage in microvolts ++ * @mem_acc_corner_map: mem-acc regulator corners mapping to low and high ++ * voltage mem-acc settings for the memories powered by ++ * this CPR3 controller and its associated CPR3 regulators ++ * @mem_acc_crossover_volt: Voltage in microvolts corresponding to the voltage ++ * that the VDD supply must be set to while a MEM ACC ++ * switch is in progress. This element must be initialized ++ * for CPRh controllers when a MEM ACC threshold voltage is ++ * defined. ++ * @core_clk: Pointer to the CPR3 controller core clock ++ * @iface_clk: Pointer to the CPR3 interface clock (platform specific) ++ * @bus_clk: Pointer to the CPR3 bus clock (platform specific) ++ * @irq: CPR interrupt number ++ * @irq_affinity_mask: The cpumask for the CPUs which the CPR interrupt should ++ * have affinity for ++ * @cpu_hotplug_notifier: CPU hotplug notifier used to reset IRQ affinity when a ++ * CPU is brought back online ++ * @ceiling_irq: Interrupt number for the interrupt that is triggered ++ * when hardware closed-loop attempts to exceed the ceiling ++ * voltage ++ * @apm: Handle to the array power mux (APM) ++ * @apm_threshold_volt: Voltage in microvolts which defines the threshold ++ * voltage to determine the APM supply selection for ++ * each corner ++ * @apm_crossover_volt: Voltage in microvolts corresponding to the voltage that ++ * the VDD supply must be set to while an APM switch is in ++ * progress. This element must be initialized for CPRh ++ * controllers when an APM threshold voltage is defined ++ * @apm_adj_volt: Minimum difference between APM threshold voltage and ++ * open-loop voltage which allows the APM threshold voltage ++ * to be used as a ceiling ++ * @apm_high_supply: APM supply to configure if VDD voltage is greater than ++ * or equal to the APM threshold voltage ++ * @apm_low_supply: APM supply to configure if the VDD voltage is less than ++ * the APM threshold voltage ++ * @base_volt: Minimum voltage in microvolts supported by the VDD ++ * supply managed by this CPR controller ++ * @corner_switch_delay_time: The delay time in nanoseconds used by the CPR ++ * controller to wait for voltage settling before ++ * acknowledging the OSM block after corner changes ++ * @cpr_clock_rate: CPR reference clock frequency in Hz. ++ * @sensor_time: The time in nanoseconds that each sensor takes to ++ * perform a measurement. ++ * @loop_time: The time in nanoseconds between consecutive CPR ++ * measurements. ++ * @up_down_delay_time: The time to delay in nanoseconds between consecutive CPR ++ * measurements when the last measurement recommended ++ * increasing or decreasing the vdd-supply voltage. ++ * (platform specific) ++ * @idle_clocks: Number of CPR reference clock ticks that the CPR ++ * controller waits in transitional states. ++ * @step_quot_init_min: The default minimum CPR step quotient value. The step ++ * quotient is the number of additional ring oscillator ++ * ticks observed when increasing one step in vdd-supply ++ * output voltage. ++ * @step_quot_init_max: The default maximum CPR step quotient value. ++ * @step_volt: Step size in microvolts between available set points ++ * of the VDD supply ++ * @down_error_step_limit: CPR4 hardware closed-loop down error step limit which ++ * defines the maximum number of VDD supply regulator steps ++ * that the voltage may be reduced as the result of a ++ * single CPR measurement. ++ * @up_error_step_limit: CPR4 hardware closed-loop up error step limit which ++ * defines the maximum number of VDD supply regulator steps ++ * that the voltage may be increased as the result of a ++ * single CPR measurement. ++ * @count_mode: CPR controller count mode ++ * @count_repeat: Number of times to perform consecutive sensor ++ * measurements when using all-at-once count modes. ++ * @proc_clock_throttle: Defines the processor clock frequency throttling ++ * register value to use. This can be used to reduce the ++ * clock frequency when a power domain exits a low power ++ * mode until CPR settles at a new voltage. ++ * (platform specific) ++ * @cpr_allowed_hw: Boolean which indicates if closed-loop CPR operation is ++ * permitted for a given chip based upon hardware fuse ++ * values ++ * @cpr_allowed_sw: Boolean which indicates if closed-loop CPR operation is ++ * permitted based upon software policies ++ * @supports_hw_closed_loop: Boolean which indicates if this CPR3/4 controller ++ * physically supports hardware closed-loop CPR operation ++ * @use_hw_closed_loop: Boolean which indicates that this controller will be ++ * using hardware closed-loop operation in place of ++ * software closed-loop operation. ++ * @ctrl_type: CPR controller type ++ * @saw_use_unit_mV: Boolean which indicates the unit used in SAW PVC ++ * interface is mV. ++ * @aggr_corner: CPR corner containing the most recently aggregated ++ * voltage configurations which are being used currently ++ * @cpr_enabled: Boolean which indicates that the CPR controller is ++ * enabled and operating in closed-loop mode. CPR clocks ++ * have been prepared and enabled whenever this flag is ++ * true. ++ * @last_corner_was_closed_loop: Boolean indicating if the last known corners ++ * were updated during closed loop operation. ++ * @cpr_suspended: Boolean which indicates that CPR has been temporarily ++ * disabled while enterring system suspend. ++ * @debugfs: Pointer to the debugfs directory of this CPR3 controller ++ * @aging_ref_volt: Reference voltage in microvolts to configure when ++ * performing CPR aging measurements. ++ * @aging_vdd_mode: vdd-supply regulator mode to configure before performing ++ * a CPR aging measurement. It should be one of ++ * REGULATOR_MODE_*. ++ * @aging_complete_vdd_mode: vdd-supply regulator mode to configure after ++ * performing a CPR aging measurement. It should be one of ++ * REGULATOR_MODE_*. ++ * @aging_ref_adjust_volt: The reference aging voltage margin in microvolts that ++ * should be added to the target quotients of the ++ * regulators managed by this controller after derating. ++ * @aging_required: Flag which indicates that a CPR aging measurement still ++ * needs to be performed for this CPR3 controller. ++ * @aging_succeeded: Flag which indicates that a CPR aging measurement has ++ * completed successfully. ++ * @aging_failed: Flag which indicates that a CPR aging measurement has ++ * failed to complete successfully. ++ * @aging_sensor: Array of CPR3 aging sensors which are used to perform ++ * aging measurements at a runtime. ++ * @aging_sensor_count: Number of elements in the aging_sensor array ++ * @aging_possible_mask: Optional bitmask used to mask off the ++ * aging_possible_reg register. ++ * @aging_possible_val: Optional value that the masked aging_possible_reg ++ * register must have in order for a CPR aging measurement ++ * to be possible. ++ * @step_quot_fixed: Fixed step quotient value used for target quotient ++ * adjustment if use_dynamic_step_quot is not set. ++ * This parameter is only relevant for CPR4 controllers ++ * when using the per-online-core or per-temperature ++ * adjustments. ++ * @initial_temp_band: Temperature band used for calculation of base-line ++ * target quotients (fused). ++ * @use_dynamic_step_quot: Boolean value which indicates that margin adjustment ++ * of target quotient will be based on the step quotient ++ * calculated dynamically in hardware for each RO. ++ * @allow_core_count_adj: Core count adjustments are allowed for this controller ++ * @allow_temp_adj: Temperature based adjustments are allowed for ++ * this controller ++ * @allow_boost: Voltage boost allowed for this controller. ++ * @temp_band_count: Number of temperature bands used for temperature based ++ * adjustment logic ++ * @temp_points: Array of temperature points in decidegrees Celsius used ++ * to specify the ranges for selected temperature bands. ++ * The array must have (temp_band_count - 1) elements ++ * allocated. ++ * @temp_sensor_id_start: Start ID of temperature sensors used for temperature ++ * based adjustments. ++ * @temp_sensor_id_end: End ID of temperature sensors used for temperature ++ * based adjustments. ++ * @voltage_settling_time: The time in nanoseconds that it takes for the ++ * VDD supply voltage to settle after being increased or ++ * decreased by step_volt microvolts which is used when ++ * SDELTA voltage margin adjustments are applied. ++ * @cpr_global_setting: Global setting for this CPR controller ++ * @panic_regs_info: Array of panic registers information which provides the ++ * list of registers to dump when the device crashes. ++ * @panic_notifier: Notifier block registered to global panic notifier list. ++ * ++ * This structure contains both configuration and runtime state data. The ++ * elements cpr_allowed_sw, use_hw_closed_loop, aggr_corner, cpr_enabled, ++ * last_corner_was_closed_loop, cpr_suspended, aging_ref_adjust_volt, ++ * aging_required, aging_succeeded, and aging_failed are state variables. ++ * ++ * The apm* elements do not need to be initialized if the VDD supply managed by ++ * the CPR3 controller does not utilize an APM. ++ * ++ * The elements step_quot_fixed, initial_temp_band, allow_core_count_adj, ++ * allow_temp_adj and temp* need to be initialized for CPR4 controllers which ++ * are using per-online-core or per-temperature adjustments. ++ */ ++struct cpr3_controller { ++ struct device *dev; ++ const char *name; ++ int ctrl_id; ++ void __iomem *cpr_ctrl_base; ++ void __iomem *fuse_base; ++ void __iomem *aging_possible_reg; ++ struct list_head list; ++ struct cpr3_thread *thread; ++ int thread_count; ++ u8 *sensor_owner; ++ int sensor_count; ++ int soc_revision; ++ struct mutex lock; ++ struct regulator *vdd_regulator; ++ struct regulator *system_regulator; ++ struct regulator *mem_acc_regulator; ++ struct regulator *vdd_limit_regulator; ++ int system_supply_max_volt; ++ int mem_acc_threshold_volt; ++ int mem_acc_corner_map[CPR3_MEM_ACC_CORNERS]; ++ int mem_acc_crossover_volt; ++ struct clk *core_clk; ++ struct clk *iface_clk; ++ struct clk *bus_clk; ++ int irq; ++ struct cpumask irq_affinity_mask; ++ struct notifier_block cpu_hotplug_notifier; ++ int ceiling_irq; ++ struct msm_apm_ctrl_dev *apm; ++ int apm_threshold_volt; ++ int apm_crossover_volt; ++ int apm_adj_volt; ++ enum msm_apm_supply apm_high_supply; ++ enum msm_apm_supply apm_low_supply; ++ int base_volt; ++ u32 corner_switch_delay_time; ++ u32 cpr_clock_rate; ++ u32 sensor_time; ++ u32 loop_time; ++ u32 up_down_delay_time; ++ u32 idle_clocks; ++ u32 step_quot_init_min; ++ u32 step_quot_init_max; ++ int step_volt; ++ u32 down_error_step_limit; ++ u32 up_error_step_limit; ++ enum cpr3_count_mode count_mode; ++ u32 count_repeat; ++ u32 proc_clock_throttle; ++ bool cpr_allowed_hw; ++ bool cpr_allowed_sw; ++ bool supports_hw_closed_loop; ++ bool use_hw_closed_loop; ++ enum cpr_controller_type ctrl_type; ++ bool saw_use_unit_mV; ++ struct cpr3_corner aggr_corner; ++ bool cpr_enabled; ++ bool last_corner_was_closed_loop; ++ bool cpr_suspended; ++ struct dentry *debugfs; ++ ++ int aging_ref_volt; ++ unsigned int aging_vdd_mode; ++ unsigned int aging_complete_vdd_mode; ++ int aging_ref_adjust_volt; ++ bool aging_required; ++ bool aging_succeeded; ++ bool aging_failed; ++ struct cpr3_aging_sensor_info *aging_sensor; ++ int aging_sensor_count; ++ u32 cur_sensor_state; ++ u32 aging_possible_mask; ++ u32 aging_possible_val; ++ ++ u32 step_quot_fixed; ++ u32 initial_temp_band; ++ bool use_dynamic_step_quot; ++ bool allow_core_count_adj; ++ bool allow_temp_adj; ++ bool allow_boost; ++ int temp_band_count; ++ int *temp_points; ++ u32 temp_sensor_id_start; ++ u32 temp_sensor_id_end; ++ u32 voltage_settling_time; ++ enum cpr_setting cpr_global_setting; ++ struct cpr3_panic_regs_info *panic_regs_info; ++ struct notifier_block panic_notifier; ++}; ++ ++/* Used for rounding voltages to the closest physically available set point. */ ++#define CPR3_ROUND(n, d) (DIV_ROUND_UP(n, d) * (d)) ++ ++#define cpr3_err(cpr3_thread, message, ...) \ ++ pr_err("%s: " message, (cpr3_thread)->name, ##__VA_ARGS__) ++#define cpr3_info(cpr3_thread, message, ...) \ ++ pr_info("%s: " message, (cpr3_thread)->name, ##__VA_ARGS__) ++#define cpr3_debug(cpr3_thread, message, ...) \ ++ pr_debug("%s: " message, (cpr3_thread)->name, ##__VA_ARGS__) ++ ++/* ++ * Offset subtracted from voltage corner values passed in from the regulator ++ * framework in order to get internal voltage corner values. This is needed ++ * since the regulator framework treats 0 as an error value at regulator ++ * registration time. ++ */ ++#define CPR3_CORNER_OFFSET 1 ++ ++#ifdef CONFIG_REGULATOR_CPR3 ++ ++int cpr3_regulator_register(struct platform_device *pdev, ++ struct cpr3_controller *ctrl); ++int cpr3_open_loop_regulator_register(struct platform_device *pdev, ++ struct cpr3_controller *ctrl); ++int cpr3_regulator_unregister(struct cpr3_controller *ctrl); ++int cpr3_open_loop_regulator_unregister(struct cpr3_controller *ctrl); ++int cpr3_regulator_suspend(struct cpr3_controller *ctrl); ++int cpr3_regulator_resume(struct cpr3_controller *ctrl); ++ ++int cpr3_allocate_threads(struct cpr3_controller *ctrl, u32 min_thread_id, ++ u32 max_thread_id); ++int cpr3_map_fuse_base(struct cpr3_controller *ctrl, ++ struct platform_device *pdev); ++int cpr3_read_tcsr_setting(struct cpr3_controller *ctrl, ++ struct platform_device *pdev, u8 start, u8 end); ++int cpr3_read_fuse_param(void __iomem *fuse_base_addr, ++ const struct cpr3_fuse_param *param, u64 *param_value); ++int cpr3_convert_open_loop_voltage_fuse(int ref_volt, int step_volt, u32 fuse, ++ int fuse_len); ++u64 cpr3_interpolate(u64 x1, u64 y1, u64 x2, u64 y2, u64 x); ++int cpr3_parse_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out); ++int cpr3_parse_corner_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out); ++int cpr3_parse_corner_band_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out); ++int cpr3_parse_common_corner_data(struct cpr3_regulator *vreg); ++int cpr3_parse_thread_u32(struct cpr3_thread *thread, const char *propname, ++ u32 *out_value, u32 value_min, u32 value_max); ++int cpr3_parse_ctrl_u32(struct cpr3_controller *ctrl, const char *propname, ++ u32 *out_value, u32 value_min, u32 value_max); ++int cpr3_parse_common_thread_data(struct cpr3_thread *thread); ++int cpr3_parse_common_ctrl_data(struct cpr3_controller *ctrl); ++int cpr3_parse_open_loop_common_ctrl_data(struct cpr3_controller *ctrl); ++int cpr3_limit_open_loop_voltages(struct cpr3_regulator *vreg); ++void cpr3_open_loop_voltage_as_ceiling(struct cpr3_regulator *vreg); ++int cpr3_limit_floor_voltages(struct cpr3_regulator *vreg); ++void cpr3_print_quots(struct cpr3_regulator *vreg); ++int cpr3_determine_part_type(struct cpr3_regulator *vreg, int fuse_volt); ++int cpr3_determine_temp_base_open_loop_correction(struct cpr3_regulator *vreg, ++ int *fuse_volt); ++int cpr3_adjust_fused_open_loop_voltages(struct cpr3_regulator *vreg, ++ int *fuse_volt); ++int cpr3_adjust_open_loop_voltages(struct cpr3_regulator *vreg); ++int cpr3_quot_adjustment(int ro_scale, int volt_adjust); ++int cpr3_voltage_adjustment(int ro_scale, int quot_adjust); ++int cpr3_parse_closed_loop_voltage_adjustments(struct cpr3_regulator *vreg, ++ u64 *ro_sel, int *volt_adjust, ++ int *volt_adjust_fuse, int *ro_scale); ++int cpr4_parse_core_count_temp_voltage_adj(struct cpr3_regulator *vreg, ++ bool use_corner_band); ++int cpr3_apm_init(struct cpr3_controller *ctrl); ++int cpr3_mem_acc_init(struct cpr3_regulator *vreg); ++void cprh_adjust_voltages_for_apm(struct cpr3_regulator *vreg); ++void cprh_adjust_voltages_for_mem_acc(struct cpr3_regulator *vreg); ++int cpr3_adjust_target_quotients(struct cpr3_regulator *vreg, ++ int *fuse_volt_adjust); ++int cpr3_handle_temp_open_loop_adjustment(struct cpr3_controller *ctrl, ++ bool is_cold); ++int cpr3_get_cold_temp_threshold(struct cpr3_regulator *vreg, int *cold_temp); ++bool cpr3_can_adjust_cold_temp(struct cpr3_regulator *vreg); ++ ++#else ++ ++static inline int cpr3_regulator_register(struct platform_device *pdev, ++ struct cpr3_controller *ctrl) ++{ ++ return -ENXIO; ++} ++ ++static inline int ++cpr3_open_loop_regulator_register(struct platform_device *pdev, ++ struct cpr3_controller *ctrl); ++{ ++ return -ENXIO; ++} ++ ++static inline int cpr3_regulator_unregister(struct cpr3_controller *ctrl) ++{ ++ return -ENXIO; ++} ++ ++static inline int ++cpr3_open_loop_regulator_unregister(struct cpr3_controller *ctrl) ++{ ++ return -ENXIO; ++} ++ ++static inline int cpr3_regulator_suspend(struct cpr3_controller *ctrl) ++{ ++ return -ENXIO; ++} ++ ++static inline int cpr3_regulator_resume(struct cpr3_controller *ctrl) ++{ ++ return -ENXIO; ++} ++ ++static inline int cpr3_get_thread_name(struct cpr3_thread *thread, ++ struct device_node *thread_node) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_allocate_threads(struct cpr3_controller *ctrl, ++ u32 min_thread_id, u32 max_thread_id) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_map_fuse_base(struct cpr3_controller *ctrl, ++ struct platform_device *pdev) ++{ ++ return -ENXIO; ++} ++ ++static inline int cpr3_read_tcsr_setting(struct cpr3_controller *ctrl, ++ struct platform_device *pdev, u8 start, u8 end) ++{ ++ return 0; ++} ++ ++static inline int cpr3_read_fuse_param(void __iomem *fuse_base_addr, ++ const struct cpr3_fuse_param *param, u64 *param_value) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_convert_open_loop_voltage_fuse(int ref_volt, ++ int step_volt, u32 fuse, int fuse_len) ++{ ++ return -EPERM; ++} ++ ++static inline u64 cpr3_interpolate(u64 x1, u64 y1, u64 x2, u64 y2, u64 x) ++{ ++ return 0; ++} ++ ++static inline int cpr3_parse_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_corner_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_corner_band_array_property( ++ struct cpr3_regulator *vreg, const char *prop_name, ++ int tuple_size, u32 *out) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_common_corner_data(struct cpr3_regulator *vreg) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_thread_u32(struct cpr3_thread *thread, ++ const char *propname, u32 *out_value, u32 value_min, ++ u32 value_max) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_ctrl_u32(struct cpr3_controller *ctrl, ++ const char *propname, u32 *out_value, u32 value_min, ++ u32 value_max) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_common_thread_data(struct cpr3_thread *thread) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_parse_common_ctrl_data(struct cpr3_controller *ctrl) ++{ ++ return -EPERM; ++} ++ ++static inline int ++cpr3_parse_open_loop_common_ctrl_data(struct cpr3_controller *ctrl) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_limit_open_loop_voltages(struct cpr3_regulator *vreg) ++{ ++ return -EPERM; ++} ++ ++static inline void cpr3_open_loop_voltage_as_ceiling( ++ struct cpr3_regulator *vreg) ++{ ++ return; ++} ++ ++static inline int cpr3_limit_floor_voltages(struct cpr3_regulator *vreg) ++{ ++ return -EPERM; ++} ++ ++static inline void cpr3_print_quots(struct cpr3_regulator *vreg) ++{ ++ return; ++} ++ ++static inline int ++cpr3_determine_part_type(struct cpr3_regulator *vreg, int fuse_volt) ++{ ++ return -EPERM; ++} ++ ++static inline int ++cpr3_determine_temp_base_open_loop_correction(struct cpr3_regulator *vreg, ++ int *fuse_volt) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_adjust_fused_open_loop_voltages( ++ struct cpr3_regulator *vreg, int *fuse_volt) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_adjust_open_loop_voltages(struct cpr3_regulator *vreg) ++{ ++ return -EPERM; ++} ++ ++static inline int cpr3_quot_adjustment(int ro_scale, int volt_adjust) ++{ ++ return 0; ++} ++ ++static inline int cpr3_voltage_adjustment(int ro_scale, int quot_adjust) ++{ ++ return 0; ++} ++ ++static inline int cpr3_parse_closed_loop_voltage_adjustments( ++ struct cpr3_regulator *vreg, u64 *ro_sel, ++ int *volt_adjust, int *volt_adjust_fuse, int *ro_scale) ++{ ++ return 0; ++} ++ ++static inline int cpr4_parse_core_count_temp_voltage_adj( ++ struct cpr3_regulator *vreg, bool use_corner_band) ++{ ++ return 0; ++} ++ ++static inline int cpr3_apm_init(struct cpr3_controller *ctrl) ++{ ++ return 0; ++} ++ ++static inline int cpr3_mem_acc_init(struct cpr3_regulator *vreg) ++{ ++ return 0; ++} ++ ++static inline void cprh_adjust_voltages_for_apm(struct cpr3_regulator *vreg) ++{ ++} ++ ++static inline void cprh_adjust_voltages_for_mem_acc(struct cpr3_regulator *vreg) ++{ ++} ++ ++static inline int cpr3_adjust_target_quotients(struct cpr3_regulator *vreg, ++ int *fuse_volt_adjust) ++{ ++ return 0; ++} ++ ++static inline int ++cpr3_handle_temp_open_loop_adjustment(struct cpr3_controller *ctrl, ++ bool is_cold) ++{ ++ return 0; ++} ++ ++static inline bool ++cpr3_can_adjust_cold_temp(struct cpr3_regulator *vreg) ++{ ++ return false; ++} ++ ++static inline int ++cpr3_get_cold_temp_threshold(struct cpr3_regulator *vreg, int *cold_temp) ++{ ++ return 0; ++} ++#endif /* CONFIG_REGULATOR_CPR3 */ ++ ++#endif /* __REGULATOR_CPR_REGULATOR_H__ */ +--- /dev/null ++++ b/drivers/regulator/cpr3-util.c +@@ -0,0 +1,2750 @@ ++/* ++ * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++/* ++ * This file contains utility functions to be used by platform specific CPR3 ++ * regulator drivers. ++ */ ++ ++#define pr_fmt(fmt) "%s: " fmt, __func__ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include "cpr3-regulator.h" ++ ++#define BYTES_PER_FUSE_ROW 8 ++#define MAX_FUSE_ROW_BIT 63 ++ ++#define CPR3_CONSECUTIVE_UP_DOWN_MIN 0 ++#define CPR3_CONSECUTIVE_UP_DOWN_MAX 15 ++#define CPR3_UP_DOWN_THRESHOLD_MIN 0 ++#define CPR3_UP_DOWN_THRESHOLD_MAX 31 ++#define CPR3_STEP_QUOT_MIN 0 ++#define CPR3_STEP_QUOT_MAX 63 ++#define CPR3_IDLE_CLOCKS_MIN 0 ++#define CPR3_IDLE_CLOCKS_MAX 31 ++ ++/* This constant has units of uV/mV so 1000 corresponds to 100%. */ ++#define CPR3_AGING_DERATE_UNITY 1000 ++ ++/** ++ * cpr3_allocate_regulators() - allocate and initialize CPR3 regulators for a ++ * given thread based upon device tree data ++ * @thread: Pointer to the CPR3 thread ++ * ++ * This function allocates the thread->vreg array based upon the number of ++ * device tree regulator subnodes. It also initializes generic elements of each ++ * regulator struct such as name, of_node, and thread. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_allocate_regulators(struct cpr3_thread *thread) ++{ ++ struct device_node *node; ++ int i, rc; ++ ++ thread->vreg_count = 0; ++ ++ for_each_available_child_of_node(thread->of_node, node) { ++ thread->vreg_count++; ++ } ++ ++ thread->vreg = devm_kcalloc(thread->ctrl->dev, thread->vreg_count, ++ sizeof(*thread->vreg), GFP_KERNEL); ++ if (!thread->vreg) ++ return -ENOMEM; ++ ++ i = 0; ++ for_each_available_child_of_node(thread->of_node, node) { ++ thread->vreg[i].of_node = node; ++ thread->vreg[i].thread = thread; ++ ++ rc = of_property_read_string(node, "regulator-name", ++ &thread->vreg[i].name); ++ if (rc) { ++ dev_err(thread->ctrl->dev, "could not find regulator name, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ i++; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_allocate_threads() - allocate and initialize CPR3 threads for a given ++ * controller based upon device tree data ++ * @ctrl: Pointer to the CPR3 controller ++ * @min_thread_id: Minimum allowed hardware thread ID for this controller ++ * @max_thread_id: Maximum allowed hardware thread ID for this controller ++ * ++ * This function allocates the ctrl->thread array based upon the number of ++ * device tree thread subnodes. It also initializes generic elements of each ++ * thread struct such as thread_id, of_node, ctrl, and vreg array. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_allocate_threads(struct cpr3_controller *ctrl, u32 min_thread_id, ++ u32 max_thread_id) ++{ ++ struct device *dev = ctrl->dev; ++ struct device_node *thread_node; ++ int i, j, rc; ++ ++ ctrl->thread_count = 0; ++ ++ for_each_available_child_of_node(dev->of_node, thread_node) { ++ ctrl->thread_count++; ++ } ++ ++ ctrl->thread = devm_kcalloc(dev, ctrl->thread_count, ++ sizeof(*ctrl->thread), GFP_KERNEL); ++ if (!ctrl->thread) ++ return -ENOMEM; ++ ++ i = 0; ++ for_each_available_child_of_node(dev->of_node, thread_node) { ++ ctrl->thread[i].of_node = thread_node; ++ ctrl->thread[i].ctrl = ctrl; ++ ++ rc = of_property_read_u32(thread_node, "qcom,cpr-thread-id", ++ &ctrl->thread[i].thread_id); ++ if (rc) { ++ dev_err(dev, "could not read DT property qcom,cpr-thread-id, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (ctrl->thread[i].thread_id < min_thread_id || ++ ctrl->thread[i].thread_id > max_thread_id) { ++ dev_err(dev, "invalid thread id = %u; not within [%u, %u]\n", ++ ctrl->thread[i].thread_id, min_thread_id, ++ max_thread_id); ++ return -EINVAL; ++ } ++ ++ /* Verify that the thread ID is unique for all child nodes. */ ++ for (j = 0; j < i; j++) { ++ if (ctrl->thread[j].thread_id ++ == ctrl->thread[i].thread_id) { ++ dev_err(dev, "duplicate thread id = %u found\n", ++ ctrl->thread[i].thread_id); ++ return -EINVAL; ++ } ++ } ++ ++ rc = cpr3_allocate_regulators(&ctrl->thread[i]); ++ if (rc) ++ return rc; ++ ++ i++; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_map_fuse_base() - ioremap the base address of the fuse region ++ * @ctrl: Pointer to the CPR3 controller ++ * @pdev: Platform device pointer for the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_map_fuse_base(struct cpr3_controller *ctrl, ++ struct platform_device *pdev) ++{ ++ struct resource *res; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fuse_base"); ++ if (!res || !res->start) { ++ dev_err(&pdev->dev, "fuse base address is missing\n"); ++ return -ENXIO; ++ } ++ ++ ctrl->fuse_base = devm_ioremap(&pdev->dev, res->start, ++ resource_size(res)); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_read_tcsr_setting - reads the CPR setting bits from TCSR register ++ * @ctrl: Pointer to the CPR3 controller ++ * @pdev: Platform device pointer for the CPR3 controller ++ * @start: start bit in TCSR register ++ * @end: end bit in TCSR register ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_read_tcsr_setting(struct cpr3_controller *ctrl, ++ struct platform_device *pdev, u8 start, u8 end) ++{ ++ struct resource *res; ++ void __iomem *tcsr_reg; ++ u32 val; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, ++ "cpr_tcsr_reg"); ++ if (!res || !res->start) ++ return 0; ++ ++ tcsr_reg = ioremap(res->start, resource_size(res)); ++ if (!tcsr_reg) { ++ dev_err(&pdev->dev, "tcsr ioremap failed\n"); ++ return 0; ++ } ++ ++ val = readl_relaxed(tcsr_reg); ++ val &= GENMASK(end, start); ++ val >>= start; ++ ++ switch (val) { ++ case 1: ++ ctrl->cpr_global_setting = CPR_DISABLED; ++ break; ++ case 2: ++ ctrl->cpr_global_setting = CPR_OPEN_LOOP_EN; ++ break; ++ case 3: ++ ctrl->cpr_global_setting = CPR_CLOSED_LOOP_EN; ++ break; ++ default: ++ ctrl->cpr_global_setting = CPR_DEFAULT; ++ } ++ ++ iounmap(tcsr_reg); ++ ++ return 0; ++} ++ ++/** ++ * cpr3_read_fuse_param() - reads a CPR3 fuse parameter out of eFuses ++ * @fuse_base_addr: Virtual memory address of the eFuse base address ++ * @param: Null terminated array of fuse param segments to read ++ * from ++ * @param_value: Output with value read from the eFuses ++ * ++ * This function reads from each of the parameter segments listed in the param ++ * array and concatenates their values together. Reading stops when an element ++ * is reached which has all 0 struct values. The total number of bits specified ++ * for the fuse parameter across all segments must be less than or equal to 64. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_read_fuse_param(void __iomem *fuse_base_addr, ++ const struct cpr3_fuse_param *param, u64 *param_value) ++{ ++ u64 fuse_val, val; ++ int bits; ++ int bits_total = 0; ++ ++ *param_value = 0; ++ ++ while (param->row || param->bit_start || param->bit_end) { ++ if (param->bit_start > param->bit_end ++ || param->bit_end > MAX_FUSE_ROW_BIT) { ++ pr_err("Invalid fuse parameter segment: row=%u, start=%u, end=%u\n", ++ param->row, param->bit_start, param->bit_end); ++ return -EINVAL; ++ } ++ ++ bits = param->bit_end - param->bit_start + 1; ++ if (bits_total + bits > 64) { ++ pr_err("Invalid fuse parameter segments; total bits = %d\n", ++ bits_total + bits); ++ return -EINVAL; ++ } ++ ++ fuse_val = readq_relaxed(fuse_base_addr ++ + param->row * BYTES_PER_FUSE_ROW); ++ val = (fuse_val >> param->bit_start) & ((1ULL << bits) - 1); ++ *param_value |= val << bits_total; ++ bits_total += bits; ++ ++ param++; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_convert_open_loop_voltage_fuse() - converts an open loop voltage fuse ++ * value into an absolute voltage with units of microvolts ++ * @ref_volt: Reference voltage in microvolts ++ * @step_volt: The step size in microvolts of the fuse LSB ++ * @fuse: Open loop voltage fuse value ++ * @fuse_len: The bit length of the fuse value ++ * ++ * The MSB of the fuse parameter corresponds to a sign bit. If it is set, then ++ * the lower bits correspond to the number of steps to go down from the ++ * reference voltage. If it is not set, then the lower bits correspond to the ++ * number of steps to go up from the reference voltage. ++ */ ++int cpr3_convert_open_loop_voltage_fuse(int ref_volt, int step_volt, u32 fuse, ++ int fuse_len) ++{ ++ int sign, steps; ++ ++ sign = (fuse & (1 << (fuse_len - 1))) ? -1 : 1; ++ steps = fuse & ((1 << (fuse_len - 1)) - 1); ++ ++ return ref_volt + sign * steps * step_volt; ++} ++ ++/** ++ * cpr3_interpolate() - performs linear interpolation ++ * @x1 Lower known x value ++ * @y1 Lower known y value ++ * @x2 Upper known x value ++ * @y2 Upper known y value ++ * @x Intermediate x value ++ * ++ * Returns y where (x, y) falls on the line between (x1, y1) and (x2, y2). ++ * It is required that x1 < x2, y1 <= y2, and x1 <= x <= x2. If these ++ * conditions are not met, then y2 will be returned. ++ */ ++u64 cpr3_interpolate(u64 x1, u64 y1, u64 x2, u64 y2, u64 x) ++{ ++ u64 temp; ++ ++ if (x1 >= x2 || y1 > y2 || x1 > x || x > x2) ++ return y2; ++ ++ temp = (x2 - x) * (y2 - y1); ++ do_div(temp, (u32)(x2 - x1)); ++ ++ return y2 - temp; ++} ++ ++/** ++ * cpr3_parse_array_property() - fill an array from a portion of the values ++ * specified for a device tree property ++ * @vreg: Pointer to the CPR3 regulator ++ * @prop_name: The name of the device tree property to read from ++ * @tuple_size: The number of elements in each tuple ++ * @out: Output data array which must be of size tuple_size ++ * ++ * cpr3_parse_common_corner_data() must be called for vreg before this function ++ * is called so that fuse combo and speed bin size elements are initialized. ++ * ++ * Three formats are supported for the device tree property: ++ * 1. Length == tuple_size ++ * (reading begins at index 0) ++ * 2. Length == tuple_size * vreg->fuse_combos_supported ++ * (reading begins at index tuple_size * vreg->fuse_combo) ++ * 3. Length == tuple_size * vreg->speed_bins_supported ++ * (reading begins at index tuple_size * vreg->speed_bin_fuse) ++ * ++ * All other property lengths are treated as errors. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out) ++{ ++ struct device_node *node = vreg->of_node; ++ int len = 0; ++ int i, offset, rc; ++ ++ if (!of_find_property(node, prop_name, &len)) { ++ cpr3_err(vreg, "property %s is missing\n", prop_name); ++ return -EINVAL; ++ } ++ ++ if (len == tuple_size * sizeof(u32)) { ++ offset = 0; ++ } else if (len == tuple_size * vreg->fuse_combos_supported ++ * sizeof(u32)) { ++ offset = tuple_size * vreg->fuse_combo; ++ } else if (vreg->speed_bins_supported > 0 && ++ len == tuple_size * vreg->speed_bins_supported * sizeof(u32)) { ++ offset = tuple_size * vreg->speed_bin_fuse; ++ } else { ++ if (vreg->speed_bins_supported > 0) ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu, %zu, or %zu\n", ++ prop_name, len, ++ tuple_size * sizeof(u32), ++ tuple_size * vreg->speed_bins_supported ++ * sizeof(u32), ++ tuple_size * vreg->fuse_combos_supported ++ * sizeof(u32)); ++ else ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu or %zu\n", ++ prop_name, len, ++ tuple_size * sizeof(u32), ++ tuple_size * vreg->fuse_combos_supported ++ * sizeof(u32)); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < tuple_size; i++) { ++ rc = of_property_read_u32_index(node, prop_name, offset + i, ++ &out[i]); ++ if (rc) { ++ cpr3_err(vreg, "error reading property %s, rc=%d\n", ++ prop_name, rc); ++ return rc; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_parse_corner_array_property() - fill a per-corner array from a portion ++ * of the values specified for a device tree property ++ * @vreg: Pointer to the CPR3 regulator ++ * @prop_name: The name of the device tree property to read from ++ * @tuple_size: The number of elements in each per-corner tuple ++ * @out: Output data array which must be of size: ++ * tuple_size * vreg->corner_count ++ * ++ * cpr3_parse_common_corner_data() must be called for vreg before this function ++ * is called so that fuse combo and speed bin size elements are initialized. ++ * ++ * Three formats are supported for the device tree property: ++ * 1. Length == tuple_size * vreg->corner_count ++ * (reading begins at index 0) ++ * 2. Length == tuple_size * vreg->fuse_combo_corner_sum ++ * (reading begins at index tuple_size * vreg->fuse_combo_offset) ++ * 3. Length == tuple_size * vreg->speed_bin_corner_sum ++ * (reading begins at index tuple_size * vreg->speed_bin_offset) ++ * ++ * All other property lengths are treated as errors. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_corner_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out) ++{ ++ struct device_node *node = vreg->of_node; ++ int len = 0; ++ int i, offset, rc; ++ ++ if (!of_find_property(node, prop_name, &len)) { ++ cpr3_err(vreg, "property %s is missing\n", prop_name); ++ return -EINVAL; ++ } ++ ++ if (len == tuple_size * vreg->corner_count * sizeof(u32)) { ++ offset = 0; ++ } else if (len == tuple_size * vreg->fuse_combo_corner_sum ++ * sizeof(u32)) { ++ offset = tuple_size * vreg->fuse_combo_offset; ++ } else if (vreg->speed_bin_corner_sum > 0 && ++ len == tuple_size * vreg->speed_bin_corner_sum * sizeof(u32)) { ++ offset = tuple_size * vreg->speed_bin_offset; ++ } else { ++ if (vreg->speed_bin_corner_sum > 0) ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu, %zu, or %zu\n", ++ prop_name, len, ++ tuple_size * vreg->corner_count * sizeof(u32), ++ tuple_size * vreg->speed_bin_corner_sum ++ * sizeof(u32), ++ tuple_size * vreg->fuse_combo_corner_sum ++ * sizeof(u32)); ++ else ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu or %zu\n", ++ prop_name, len, ++ tuple_size * vreg->corner_count * sizeof(u32), ++ tuple_size * vreg->fuse_combo_corner_sum ++ * sizeof(u32)); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < tuple_size * vreg->corner_count; i++) { ++ rc = of_property_read_u32_index(node, prop_name, offset + i, ++ &out[i]); ++ if (rc) { ++ cpr3_err(vreg, "error reading property %s, rc=%d\n", ++ prop_name, rc); ++ return rc; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_parse_corner_band_array_property() - fill a per-corner band array ++ * from a portion of the values specified for a device tree ++ * property ++ * @vreg: Pointer to the CPR3 regulator ++ * @prop_name: The name of the device tree property to read from ++ * @tuple_size: The number of elements in each per-corner band tuple ++ * @out: Output data array which must be of size: ++ * tuple_size * vreg->corner_band_count ++ * ++ * cpr3_parse_common_corner_data() must be called for vreg before this function ++ * is called so that fuse combo and speed bin size elements are initialized. ++ * In addition, corner band fuse combo and speed bin sum and offset elements ++ * must be initialized prior to executing this function. ++ * ++ * Three formats are supported for the device tree property: ++ * 1. Length == tuple_size * vreg->corner_band_count ++ * (reading begins at index 0) ++ * 2. Length == tuple_size * vreg->fuse_combo_corner_band_sum ++ * (reading begins at index tuple_size * ++ * vreg->fuse_combo_corner_band_offset) ++ * 3. Length == tuple_size * vreg->speed_bin_corner_band_sum ++ * (reading begins at index tuple_size * ++ * vreg->speed_bin_corner_band_offset) ++ * ++ * All other property lengths are treated as errors. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_corner_band_array_property(struct cpr3_regulator *vreg, ++ const char *prop_name, int tuple_size, u32 *out) ++{ ++ struct device_node *node = vreg->of_node; ++ int len = 0; ++ int i, offset, rc; ++ ++ if (!of_find_property(node, prop_name, &len)) { ++ cpr3_err(vreg, "property %s is missing\n", prop_name); ++ return -EINVAL; ++ } ++ ++ if (len == tuple_size * vreg->corner_band_count * sizeof(u32)) { ++ offset = 0; ++ } else if (len == tuple_size * vreg->fuse_combo_corner_band_sum ++ * sizeof(u32)) { ++ offset = tuple_size * vreg->fuse_combo_corner_band_offset; ++ } else if (vreg->speed_bin_corner_band_sum > 0 && ++ len == tuple_size * vreg->speed_bin_corner_band_sum * ++ sizeof(u32)) { ++ offset = tuple_size * vreg->speed_bin_corner_band_offset; ++ } else { ++ if (vreg->speed_bin_corner_band_sum > 0) ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu, %zu, or %zu\n", ++ prop_name, len, ++ tuple_size * vreg->corner_band_count * ++ sizeof(u32), ++ tuple_size * vreg->speed_bin_corner_band_sum ++ * sizeof(u32), ++ tuple_size * vreg->fuse_combo_corner_band_sum ++ * sizeof(u32)); ++ else ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu or %zu\n", ++ prop_name, len, ++ tuple_size * vreg->corner_band_count * ++ sizeof(u32), ++ tuple_size * vreg->fuse_combo_corner_band_sum ++ * sizeof(u32)); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < tuple_size * vreg->corner_band_count; i++) { ++ rc = of_property_read_u32_index(node, prop_name, offset + i, ++ &out[i]); ++ if (rc) { ++ cpr3_err(vreg, "error reading property %s, rc=%d\n", ++ prop_name, rc); ++ return rc; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_parse_common_corner_data() - parse common CPR3 properties relating to ++ * the corners supported by a CPR3 regulator from device tree ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function reads, validates, and utilizes the following device tree ++ * properties: qcom,cpr-fuse-corners, qcom,cpr-fuse-combos, qcom,cpr-speed-bins, ++ * qcom,cpr-speed-bin-corners, qcom,cpr-corners, qcom,cpr-voltage-ceiling, ++ * qcom,cpr-voltage-floor, qcom,corner-frequencies, ++ * and qcom,cpr-corner-fmax-map. ++ * ++ * It initializes these CPR3 regulator elements: corner, corner_count, ++ * fuse_combos_supported, fuse_corner_map, and speed_bins_supported. It ++ * initializes these elements for each corner: ceiling_volt, floor_volt, ++ * proc_freq, and cpr_fuse_corner. ++ * ++ * It requires that the following CPR3 regulator elements be initialized before ++ * being called: fuse_corner_count, fuse_combo, and speed_bin_fuse. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_common_corner_data(struct cpr3_regulator *vreg) ++{ ++ struct device_node *node = vreg->of_node; ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ u32 max_fuse_combos, fuse_corners, aging_allowed = 0; ++ u32 max_speed_bins = 0; ++ u32 *combo_corners; ++ u32 *speed_bin_corners; ++ u32 *temp; ++ int i, j, rc; ++ ++ rc = of_property_read_u32(node, "qcom,cpr-fuse-corners", &fuse_corners); ++ if (rc) { ++ cpr3_err(vreg, "error reading property qcom,cpr-fuse-corners, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (vreg->fuse_corner_count != fuse_corners) { ++ cpr3_err(vreg, "device tree config supports %d fuse corners but the hardware has %d fuse corners\n", ++ fuse_corners, vreg->fuse_corner_count); ++ return -EINVAL; ++ } ++ ++ rc = of_property_read_u32(node, "qcom,cpr-fuse-combos", ++ &max_fuse_combos); ++ if (rc) { ++ cpr3_err(vreg, "error reading property qcom,cpr-fuse-combos, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ /* ++ * Sanity check against arbitrarily large value to avoid excessive ++ * memory allocation. ++ */ ++ if (max_fuse_combos > 100 || max_fuse_combos == 0) { ++ cpr3_err(vreg, "qcom,cpr-fuse-combos is invalid: %u\n", ++ max_fuse_combos); ++ return -EINVAL; ++ } ++ ++ if (vreg->fuse_combo >= max_fuse_combos) { ++ cpr3_err(vreg, "device tree config supports fuse combos 0-%u but the hardware has combo %d\n", ++ max_fuse_combos - 1, vreg->fuse_combo); ++ BUG_ON(1); ++ return -EINVAL; ++ } ++ ++ vreg->fuse_combos_supported = max_fuse_combos; ++ ++ of_property_read_u32(node, "qcom,cpr-speed-bins", &max_speed_bins); ++ ++ /* ++ * Sanity check against arbitrarily large value to avoid excessive ++ * memory allocation. ++ */ ++ if (max_speed_bins > 100) { ++ cpr3_err(vreg, "qcom,cpr-speed-bins is invalid: %u\n", ++ max_speed_bins); ++ return -EINVAL; ++ } ++ ++ if (max_speed_bins && vreg->speed_bin_fuse >= max_speed_bins) { ++ cpr3_err(vreg, "device tree config supports speed bins 0-%u but the hardware has speed bin %d\n", ++ max_speed_bins - 1, vreg->speed_bin_fuse); ++ BUG(); ++ return -EINVAL; ++ } ++ ++ vreg->speed_bins_supported = max_speed_bins; ++ ++ combo_corners = kcalloc(vreg->fuse_combos_supported, ++ sizeof(*combo_corners), GFP_KERNEL); ++ if (!combo_corners) ++ return -ENOMEM; ++ ++ rc = of_property_read_u32_array(node, "qcom,cpr-corners", combo_corners, ++ vreg->fuse_combos_supported); ++ if (rc == -EOVERFLOW) { ++ /* Single value case */ ++ rc = of_property_read_u32(node, "qcom,cpr-corners", ++ combo_corners); ++ for (i = 1; i < vreg->fuse_combos_supported; i++) ++ combo_corners[i] = combo_corners[0]; ++ } ++ if (rc) { ++ cpr3_err(vreg, "error reading property qcom,cpr-corners, rc=%d\n", ++ rc); ++ kfree(combo_corners); ++ return rc; ++ } ++ ++ vreg->fuse_combo_offset = 0; ++ vreg->fuse_combo_corner_sum = 0; ++ for (i = 0; i < vreg->fuse_combos_supported; i++) { ++ vreg->fuse_combo_corner_sum += combo_corners[i]; ++ if (i < vreg->fuse_combo) ++ vreg->fuse_combo_offset += combo_corners[i]; ++ } ++ ++ vreg->corner_count = combo_corners[vreg->fuse_combo]; ++ ++ kfree(combo_corners); ++ ++ vreg->speed_bin_offset = 0; ++ vreg->speed_bin_corner_sum = 0; ++ if (vreg->speed_bins_supported > 0) { ++ speed_bin_corners = kcalloc(vreg->speed_bins_supported, ++ sizeof(*speed_bin_corners), GFP_KERNEL); ++ if (!speed_bin_corners) ++ return -ENOMEM; ++ ++ rc = of_property_read_u32_array(node, ++ "qcom,cpr-speed-bin-corners", speed_bin_corners, ++ vreg->speed_bins_supported); ++ if (rc) { ++ cpr3_err(vreg, "error reading property qcom,cpr-speed-bin-corners, rc=%d\n", ++ rc); ++ kfree(speed_bin_corners); ++ return rc; ++ } ++ ++ for (i = 0; i < vreg->speed_bins_supported; i++) { ++ vreg->speed_bin_corner_sum += speed_bin_corners[i]; ++ if (i < vreg->speed_bin_fuse) ++ vreg->speed_bin_offset += speed_bin_corners[i]; ++ } ++ ++ if (speed_bin_corners[vreg->speed_bin_fuse] ++ != vreg->corner_count) { ++ cpr3_err(vreg, "qcom,cpr-corners and qcom,cpr-speed-bin-corners conflict on number of corners: %d vs %u\n", ++ vreg->corner_count, ++ speed_bin_corners[vreg->speed_bin_fuse]); ++ kfree(speed_bin_corners); ++ return -EINVAL; ++ } ++ ++ kfree(speed_bin_corners); ++ } ++ ++ vreg->corner = devm_kcalloc(ctrl->dev, vreg->corner_count, ++ sizeof(*vreg->corner), GFP_KERNEL); ++ temp = kcalloc(vreg->corner_count, sizeof(*temp), GFP_KERNEL); ++ if (!vreg->corner || !temp) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_corner_array_property(vreg, "qcom,cpr-voltage-ceiling", ++ 1, temp); ++ if (rc) ++ goto free_temp; ++ for (i = 0; i < vreg->corner_count; i++) { ++ vreg->corner[i].ceiling_volt ++ = CPR3_ROUND(temp[i], ctrl->step_volt); ++ vreg->corner[i].abs_ceiling_volt = vreg->corner[i].ceiling_volt; ++ } ++ ++ rc = cpr3_parse_corner_array_property(vreg, "qcom,cpr-voltage-floor", ++ 1, temp); ++ if (rc) ++ goto free_temp; ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].floor_volt ++ = CPR3_ROUND(temp[i], ctrl->step_volt); ++ ++ /* Validate ceiling and floor values */ ++ for (i = 0; i < vreg->corner_count; i++) { ++ if (vreg->corner[i].floor_volt ++ > vreg->corner[i].ceiling_volt) { ++ cpr3_err(vreg, "CPR floor[%d]=%d > ceiling[%d]=%d uV\n", ++ i, vreg->corner[i].floor_volt, ++ i, vreg->corner[i].ceiling_volt); ++ rc = -EINVAL; ++ goto free_temp; ++ } ++ } ++ ++ /* Load optional system-supply voltages */ ++ if (of_find_property(vreg->of_node, "qcom,system-voltage", NULL)) { ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,system-voltage", 1, temp); ++ if (rc) ++ goto free_temp; ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].system_volt = temp[i]; ++ } ++ ++ rc = cpr3_parse_corner_array_property(vreg, "qcom,corner-frequencies", ++ 1, temp); ++ if (rc) ++ goto free_temp; ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].proc_freq = temp[i]; ++ ++ /* Validate frequencies */ ++ for (i = 1; i < vreg->corner_count; i++) { ++ if (vreg->corner[i].proc_freq ++ < vreg->corner[i - 1].proc_freq) { ++ cpr3_err(vreg, "invalid frequency: freq[%d]=%u < freq[%d]=%u\n", ++ i, vreg->corner[i].proc_freq, i - 1, ++ vreg->corner[i - 1].proc_freq); ++ rc = -EINVAL; ++ goto free_temp; ++ } ++ } ++ ++ vreg->fuse_corner_map = devm_kcalloc(ctrl->dev, vreg->fuse_corner_count, ++ sizeof(*vreg->fuse_corner_map), GFP_KERNEL); ++ if (!vreg->fuse_corner_map) { ++ rc = -ENOMEM; ++ goto free_temp; ++ } ++ ++ rc = cpr3_parse_array_property(vreg, "qcom,cpr-corner-fmax-map", ++ vreg->fuse_corner_count, temp); ++ if (rc) ++ goto free_temp; ++ for (i = 0; i < vreg->fuse_corner_count; i++) { ++ vreg->fuse_corner_map[i] = temp[i] - CPR3_CORNER_OFFSET; ++ if (temp[i] < CPR3_CORNER_OFFSET ++ || temp[i] > vreg->corner_count + CPR3_CORNER_OFFSET) { ++ cpr3_err(vreg, "invalid corner value specified in qcom,cpr-corner-fmax-map: %u\n", ++ temp[i]); ++ rc = -EINVAL; ++ goto free_temp; ++ } else if (i > 0 && temp[i - 1] >= temp[i]) { ++ cpr3_err(vreg, "invalid corner %u less than or equal to previous corner %u\n", ++ temp[i], temp[i - 1]); ++ rc = -EINVAL; ++ goto free_temp; ++ } ++ } ++ if (temp[vreg->fuse_corner_count - 1] != vreg->corner_count) ++ cpr3_debug(vreg, "Note: highest Fmax corner %u in qcom,cpr-corner-fmax-map does not match highest supported corner %d\n", ++ temp[vreg->fuse_corner_count - 1], ++ vreg->corner_count); ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ for (j = 0; j < vreg->fuse_corner_count; j++) { ++ if (i + CPR3_CORNER_OFFSET <= temp[j]) { ++ vreg->corner[i].cpr_fuse_corner = j; ++ break; ++ } ++ } ++ if (j == vreg->fuse_corner_count) { ++ /* ++ * Handle the case where the highest fuse corner maps ++ * to a corner below the highest corner. ++ */ ++ vreg->corner[i].cpr_fuse_corner ++ = vreg->fuse_corner_count - 1; ++ } ++ } ++ ++ if (of_find_property(vreg->of_node, ++ "qcom,allow-aging-voltage-adjustment", NULL)) { ++ rc = cpr3_parse_array_property(vreg, ++ "qcom,allow-aging-voltage-adjustment", ++ 1, &aging_allowed); ++ if (rc) ++ goto free_temp; ++ ++ vreg->aging_allowed = aging_allowed; ++ } ++ ++ if (of_find_property(vreg->of_node, ++ "qcom,allow-aging-open-loop-voltage-adjustment", NULL)) { ++ rc = cpr3_parse_array_property(vreg, ++ "qcom,allow-aging-open-loop-voltage-adjustment", ++ 1, &aging_allowed); ++ if (rc) ++ goto free_temp; ++ ++ vreg->aging_allow_open_loop_adj = aging_allowed; ++ } ++ ++ if (vreg->aging_allowed) { ++ if (ctrl->aging_ref_volt <= 0) { ++ cpr3_err(ctrl, "qcom,cpr-aging-ref-voltage must be specified\n"); ++ rc = -EINVAL; ++ goto free_temp; ++ } ++ ++ rc = cpr3_parse_array_property(vreg, ++ "qcom,cpr-aging-max-voltage-adjustment", ++ 1, &vreg->aging_max_adjust_volt); ++ if (rc) ++ goto free_temp; ++ ++ rc = cpr3_parse_array_property(vreg, ++ "qcom,cpr-aging-ref-corner", 1, &vreg->aging_corner); ++ if (rc) { ++ goto free_temp; ++ } else if (vreg->aging_corner < CPR3_CORNER_OFFSET ++ || vreg->aging_corner > vreg->corner_count - 1 ++ + CPR3_CORNER_OFFSET) { ++ cpr3_err(vreg, "aging reference corner=%d not in range [%d, %d]\n", ++ vreg->aging_corner, CPR3_CORNER_OFFSET, ++ vreg->corner_count - 1 + CPR3_CORNER_OFFSET); ++ rc = -EINVAL; ++ goto free_temp; ++ } ++ vreg->aging_corner -= CPR3_CORNER_OFFSET; ++ ++ if (of_find_property(vreg->of_node, "qcom,cpr-aging-derate", ++ NULL)) { ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,cpr-aging-derate", 1, temp); ++ if (rc) ++ goto free_temp; ++ ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].aging_derate = temp[i]; ++ } else { ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].aging_derate ++ = CPR3_AGING_DERATE_UNITY; ++ } ++ } ++ ++free_temp: ++ kfree(temp); ++ return rc; ++} ++ ++/** ++ * cpr3_parse_thread_u32() - parse the specified property from the CPR3 thread's ++ * device tree node and verify that it is within the allowed limits ++ * @thread: Pointer to the CPR3 thread ++ * @propname: The name of the device tree property to read ++ * @out_value: The output pointer to fill with the value read ++ * @value_min: The minimum allowed property value ++ * @value_max: The maximum allowed property value ++ * ++ * This function prints a verbose error message if the property is missing or ++ * has a value which is not within the specified range. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_thread_u32(struct cpr3_thread *thread, const char *propname, ++ u32 *out_value, u32 value_min, u32 value_max) ++{ ++ int rc; ++ ++ rc = of_property_read_u32(thread->of_node, propname, out_value); ++ if (rc) { ++ cpr3_err(thread->ctrl, "thread %u error reading property %s, rc=%d\n", ++ thread->thread_id, propname, rc); ++ return rc; ++ } ++ ++ if (*out_value < value_min || *out_value > value_max) { ++ cpr3_err(thread->ctrl, "thread %u %s=%u is invalid; allowed range: [%u, %u]\n", ++ thread->thread_id, propname, *out_value, value_min, ++ value_max); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_parse_ctrl_u32() - parse the specified property from the CPR3 ++ * controller's device tree node and verify that it is within the ++ * allowed limits ++ * @ctrl: Pointer to the CPR3 controller ++ * @propname: The name of the device tree property to read ++ * @out_value: The output pointer to fill with the value read ++ * @value_min: The minimum allowed property value ++ * @value_max: The maximum allowed property value ++ * ++ * This function prints a verbose error message if the property is missing or ++ * has a value which is not within the specified range. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_ctrl_u32(struct cpr3_controller *ctrl, const char *propname, ++ u32 *out_value, u32 value_min, u32 value_max) ++{ ++ int rc; ++ ++ rc = of_property_read_u32(ctrl->dev->of_node, propname, out_value); ++ if (rc) { ++ cpr3_err(ctrl, "error reading property %s, rc=%d\n", ++ propname, rc); ++ return rc; ++ } ++ ++ if (*out_value < value_min || *out_value > value_max) { ++ cpr3_err(ctrl, "%s=%u is invalid; allowed range: [%u, %u]\n", ++ propname, *out_value, value_min, value_max); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_parse_common_thread_data() - parse common CPR3 thread properties from ++ * device tree ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_common_thread_data(struct cpr3_thread *thread) ++{ ++ int rc; ++ ++ rc = cpr3_parse_thread_u32(thread, "qcom,cpr-consecutive-up", ++ &thread->consecutive_up, CPR3_CONSECUTIVE_UP_DOWN_MIN, ++ CPR3_CONSECUTIVE_UP_DOWN_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_thread_u32(thread, "qcom,cpr-consecutive-down", ++ &thread->consecutive_down, CPR3_CONSECUTIVE_UP_DOWN_MIN, ++ CPR3_CONSECUTIVE_UP_DOWN_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_thread_u32(thread, "qcom,cpr-up-threshold", ++ &thread->up_threshold, CPR3_UP_DOWN_THRESHOLD_MIN, ++ CPR3_UP_DOWN_THRESHOLD_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_thread_u32(thread, "qcom,cpr-down-threshold", ++ &thread->down_threshold, CPR3_UP_DOWN_THRESHOLD_MIN, ++ CPR3_UP_DOWN_THRESHOLD_MAX); ++ if (rc) ++ return rc; ++ ++ return rc; ++} ++ ++/** ++ * cpr3_parse_irq_affinity() - parse CPR IRQ affinity information ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_parse_irq_affinity(struct cpr3_controller *ctrl) ++{ ++ struct device_node *cpu_node; ++ int i, cpu; ++ int len = 0; ++ ++ if (!of_find_property(ctrl->dev->of_node, "qcom,cpr-interrupt-affinity", ++ &len)) { ++ /* No IRQ affinity required */ ++ return 0; ++ } ++ ++ len /= sizeof(u32); ++ ++ for (i = 0; i < len; i++) { ++ cpu_node = of_parse_phandle(ctrl->dev->of_node, ++ "qcom,cpr-interrupt-affinity", i); ++ if (!cpu_node) { ++ cpr3_err(ctrl, "could not find CPU node %d\n", i); ++ return -EINVAL; ++ } ++ ++ for_each_possible_cpu(cpu) { ++ if (of_get_cpu_node(cpu, NULL) == cpu_node) { ++ cpumask_set_cpu(cpu, &ctrl->irq_affinity_mask); ++ break; ++ } ++ } ++ of_node_put(cpu_node); ++ } ++ ++ return 0; ++} ++ ++static int cpr3_panic_notifier_init(struct cpr3_controller *ctrl) ++{ ++ struct device_node *node = ctrl->dev->of_node; ++ struct cpr3_panic_regs_info *panic_regs_info; ++ struct cpr3_reg_info *regs; ++ int i, reg_count, len, rc = 0; ++ ++ if (!of_find_property(node, "qcom,cpr-panic-reg-addr-list", &len)) { ++ /* panic register address list not specified */ ++ return rc; ++ } ++ ++ reg_count = len / sizeof(u32); ++ if (!reg_count) { ++ cpr3_err(ctrl, "qcom,cpr-panic-reg-addr-list has invalid len = %d\n", ++ len); ++ return -EINVAL; ++ } ++ ++ if (!of_find_property(node, "qcom,cpr-panic-reg-name-list", NULL)) { ++ cpr3_err(ctrl, "property qcom,cpr-panic-reg-name-list not specified\n"); ++ return -EINVAL; ++ } ++ ++ len = of_property_count_strings(node, "qcom,cpr-panic-reg-name-list"); ++ if (reg_count != len) { ++ cpr3_err(ctrl, "qcom,cpr-panic-reg-name-list should have %d strings\n", ++ reg_count); ++ return -EINVAL; ++ } ++ ++ panic_regs_info = devm_kzalloc(ctrl->dev, sizeof(*panic_regs_info), ++ GFP_KERNEL); ++ if (!panic_regs_info) ++ return -ENOMEM; ++ ++ regs = devm_kcalloc(ctrl->dev, reg_count, sizeof(*regs), GFP_KERNEL); ++ if (!regs) ++ return -ENOMEM; ++ ++ for (i = 0; i < reg_count; i++) { ++ rc = of_property_read_string_index(node, ++ "qcom,cpr-panic-reg-name-list", i, ++ &(regs[i].name)); ++ if (rc) { ++ cpr3_err(ctrl, "error reading property qcom,cpr-panic-reg-name-list, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = of_property_read_u32_index(node, ++ "qcom,cpr-panic-reg-addr-list", i, ++ &(regs[i].addr)); ++ if (rc) { ++ cpr3_err(ctrl, "error reading property qcom,cpr-panic-reg-addr-list, rc=%d\n", ++ rc); ++ return rc; ++ } ++ regs[i].virt_addr = devm_ioremap(ctrl->dev, regs[i].addr, 0x4); ++ if (!regs[i].virt_addr) { ++ pr_err("Unable to map panic register addr 0x%08x\n", ++ regs[i].addr); ++ return -EINVAL; ++ } ++ regs[i].value = 0xFFFFFFFF; ++ } ++ ++ panic_regs_info->reg_count = reg_count; ++ panic_regs_info->regs = regs; ++ ctrl->panic_regs_info = panic_regs_info; ++ ++ return rc; ++} ++ ++/** ++ * cpr3_parse_common_ctrl_data() - parse common CPR3 controller properties from ++ * device tree ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_common_ctrl_data(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-sensor-time", ++ &ctrl->sensor_time, 0, UINT_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-loop-time", ++ &ctrl->loop_time, 0, UINT_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-idle-cycles", ++ &ctrl->idle_clocks, CPR3_IDLE_CLOCKS_MIN, ++ CPR3_IDLE_CLOCKS_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-step-quot-init-min", ++ &ctrl->step_quot_init_min, CPR3_STEP_QUOT_MIN, ++ CPR3_STEP_QUOT_MAX); ++ if (rc) ++ return rc; ++ ++ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-step-quot-init-max", ++ &ctrl->step_quot_init_max, CPR3_STEP_QUOT_MIN, ++ CPR3_STEP_QUOT_MAX); ++ if (rc) ++ return rc; ++ ++ rc = of_property_read_u32(ctrl->dev->of_node, "qcom,voltage-step", ++ &ctrl->step_volt); ++ if (rc) { ++ cpr3_err(ctrl, "error reading property qcom,voltage-step, rc=%d\n", ++ rc); ++ return rc; ++ } ++ if (ctrl->step_volt <= 0) { ++ cpr3_err(ctrl, "qcom,voltage-step=%d is invalid\n", ++ ctrl->step_volt); ++ return -EINVAL; ++ } ++ ++ rc = cpr3_parse_ctrl_u32(ctrl, "qcom,cpr-count-mode", ++ &ctrl->count_mode, CPR3_COUNT_MODE_ALL_AT_ONCE_MIN, ++ CPR3_COUNT_MODE_STAGGERED); ++ if (rc) ++ return rc; ++ ++ /* Count repeat is optional */ ++ ctrl->count_repeat = 0; ++ of_property_read_u32(ctrl->dev->of_node, "qcom,cpr-count-repeat", ++ &ctrl->count_repeat); ++ ++ ctrl->cpr_allowed_sw = ++ of_property_read_bool(ctrl->dev->of_node, "qcom,cpr-enable") || ++ ctrl->cpr_global_setting == CPR_CLOSED_LOOP_EN; ++ ++ rc = cpr3_parse_irq_affinity(ctrl); ++ if (rc) ++ return rc; ++ ++ /* Aging reference voltage is optional */ ++ ctrl->aging_ref_volt = 0; ++ of_property_read_u32(ctrl->dev->of_node, "qcom,cpr-aging-ref-voltage", ++ &ctrl->aging_ref_volt); ++ ++ /* Aging possible bitmask is optional */ ++ ctrl->aging_possible_mask = 0; ++ of_property_read_u32(ctrl->dev->of_node, ++ "qcom,cpr-aging-allowed-reg-mask", ++ &ctrl->aging_possible_mask); ++ ++ if (ctrl->aging_possible_mask) { ++ /* ++ * Aging possible register value required if bitmask is ++ * specified ++ */ ++ rc = cpr3_parse_ctrl_u32(ctrl, ++ "qcom,cpr-aging-allowed-reg-value", ++ &ctrl->aging_possible_val, 0, UINT_MAX); ++ if (rc) ++ return rc; ++ } ++ ++ if (of_find_property(ctrl->dev->of_node, "clock-names", NULL)) { ++ ctrl->core_clk = devm_clk_get(ctrl->dev, "core_clk"); ++ if (IS_ERR(ctrl->core_clk)) { ++ rc = PTR_ERR(ctrl->core_clk); ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable request core clock, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ rc = cpr3_panic_notifier_init(ctrl); ++ if (rc) ++ return rc; ++ ++ if (of_find_property(ctrl->dev->of_node, "vdd-supply", NULL)) { ++ ctrl->vdd_regulator = devm_regulator_get(ctrl->dev, "vdd"); ++ if (IS_ERR(ctrl->vdd_regulator)) { ++ rc = PTR_ERR(ctrl->vdd_regulator); ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable to request vdd regulator, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } else { ++ cpr3_err(ctrl, "vdd supply is not defined\n"); ++ return -ENODEV; ++ } ++ ++ ctrl->system_regulator = devm_regulator_get_optional(ctrl->dev, ++ "system"); ++ if (IS_ERR(ctrl->system_regulator)) { ++ rc = PTR_ERR(ctrl->system_regulator); ++ if (rc != -EPROBE_DEFER) { ++ rc = 0; ++ ctrl->system_regulator = NULL; ++ } else { ++ return rc; ++ } ++ } ++ ++ ctrl->mem_acc_regulator = devm_regulator_get_optional(ctrl->dev, ++ "mem-acc"); ++ if (IS_ERR(ctrl->mem_acc_regulator)) { ++ rc = PTR_ERR(ctrl->mem_acc_regulator); ++ if (rc != -EPROBE_DEFER) { ++ rc = 0; ++ ctrl->mem_acc_regulator = NULL; ++ } else { ++ return rc; ++ } ++ } ++ ++ return rc; ++} ++ ++/** ++ * cpr3_parse_open_loop_common_ctrl_data() - parse common open loop CPR3 ++ * controller properties from device tree ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_open_loop_common_ctrl_data(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ rc = of_property_read_u32(ctrl->dev->of_node, "qcom,voltage-step", ++ &ctrl->step_volt); ++ if (rc) { ++ cpr3_err(ctrl, "error reading property qcom,voltage-step, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (ctrl->step_volt <= 0) { ++ cpr3_err(ctrl, "qcom,voltage-step=%d is invalid\n", ++ ctrl->step_volt); ++ return -EINVAL; ++ } ++ ++ if (of_find_property(ctrl->dev->of_node, "vdd-supply", NULL)) { ++ ctrl->vdd_regulator = devm_regulator_get(ctrl->dev, "vdd"); ++ if (IS_ERR(ctrl->vdd_regulator)) { ++ rc = PTR_ERR(ctrl->vdd_regulator); ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable to request vdd regulator, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } else { ++ cpr3_err(ctrl, "vdd supply is not defined\n"); ++ return -ENODEV; ++ } ++ ++ ctrl->system_regulator = devm_regulator_get_optional(ctrl->dev, ++ "system"); ++ if (IS_ERR(ctrl->system_regulator)) { ++ rc = PTR_ERR(ctrl->system_regulator); ++ if (rc != -EPROBE_DEFER) { ++ rc = 0; ++ ctrl->system_regulator = NULL; ++ } else { ++ return rc; ++ } ++ } else { ++ rc = regulator_enable(ctrl->system_regulator); ++ } ++ ++ ctrl->mem_acc_regulator = devm_regulator_get_optional(ctrl->dev, ++ "mem-acc"); ++ if (IS_ERR(ctrl->mem_acc_regulator)) { ++ rc = PTR_ERR(ctrl->mem_acc_regulator); ++ if (rc != -EPROBE_DEFER) { ++ rc = 0; ++ ctrl->mem_acc_regulator = NULL; ++ } else { ++ return rc; ++ } ++ } ++ ++ return rc; ++} ++ ++/** ++ * cpr3_limit_open_loop_voltages() - modify the open-loop voltage of each corner ++ * so that it fits within the floor to ceiling ++ * voltage range of the corner ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function clips the open-loop voltage for each corner so that it is ++ * limited to the floor to ceiling range. It also rounds each open-loop voltage ++ * so that it corresponds to a set point available to the underlying regulator. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_limit_open_loop_voltages(struct cpr3_regulator *vreg) ++{ ++ int i, volt; ++ ++ cpr3_debug(vreg, "open-loop voltages after trimming and rounding:\n"); ++ for (i = 0; i < vreg->corner_count; i++) { ++ volt = CPR3_ROUND(vreg->corner[i].open_loop_volt, ++ vreg->thread->ctrl->step_volt); ++ if (volt < vreg->corner[i].floor_volt) ++ volt = vreg->corner[i].floor_volt; ++ else if (volt > vreg->corner[i].ceiling_volt) ++ volt = vreg->corner[i].ceiling_volt; ++ vreg->corner[i].open_loop_volt = volt; ++ cpr3_debug(vreg, "corner[%2d]: open-loop=%d uV\n", i, volt); ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr3_open_loop_voltage_as_ceiling() - configures the ceiling voltage for each ++ * corner to equal the open-loop voltage if the relevant device ++ * tree property is found for the CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function assumes that the the open-loop voltage for each corner has ++ * already been rounded to the nearest allowed set point and that it falls ++ * within the floor to ceiling range. ++ * ++ * Return: none ++ */ ++void cpr3_open_loop_voltage_as_ceiling(struct cpr3_regulator *vreg) ++{ ++ int i; ++ ++ if (!of_property_read_bool(vreg->of_node, ++ "qcom,cpr-scaled-open-loop-voltage-as-ceiling")) ++ return; ++ ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].ceiling_volt ++ = vreg->corner[i].open_loop_volt; ++} ++ ++/** ++ * cpr3_limit_floor_voltages() - raise the floor voltage of each corner so that ++ * the optional maximum floor to ceiling voltage range specified in ++ * device tree is satisfied ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function also ensures that the open-loop voltage for each corner falls ++ * within the final floor to ceiling voltage range and that floor voltages ++ * increase monotonically. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_limit_floor_voltages(struct cpr3_regulator *vreg) ++{ ++ char *prop = "qcom,cpr-floor-to-ceiling-max-range"; ++ int i, floor_new; ++ u32 *floor_range; ++ int rc = 0; ++ ++ if (!of_find_property(vreg->of_node, prop, NULL)) ++ goto enforce_monotonicity; ++ ++ floor_range = kcalloc(vreg->corner_count, sizeof(*floor_range), ++ GFP_KERNEL); ++ if (!floor_range) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_corner_array_property(vreg, prop, 1, floor_range); ++ if (rc) ++ goto free_floor_adjust; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ if ((s32)floor_range[i] >= 0) { ++ floor_new = CPR3_ROUND(vreg->corner[i].ceiling_volt ++ - floor_range[i], ++ vreg->thread->ctrl->step_volt); ++ ++ vreg->corner[i].floor_volt = max(floor_new, ++ vreg->corner[i].floor_volt); ++ if (vreg->corner[i].open_loop_volt ++ < vreg->corner[i].floor_volt) ++ vreg->corner[i].open_loop_volt ++ = vreg->corner[i].floor_volt; ++ } ++ } ++ ++free_floor_adjust: ++ kfree(floor_range); ++ ++enforce_monotonicity: ++ /* Ensure that floor voltages increase monotonically. */ ++ for (i = 1; i < vreg->corner_count; i++) { ++ if (vreg->corner[i].floor_volt ++ < vreg->corner[i - 1].floor_volt) { ++ cpr3_debug(vreg, "corner %d floor voltage=%d uV < corner %d voltage=%d uV; overriding: corner %d voltage=%d\n", ++ i, vreg->corner[i].floor_volt, ++ i - 1, vreg->corner[i - 1].floor_volt, ++ i, vreg->corner[i - 1].floor_volt); ++ vreg->corner[i].floor_volt ++ = vreg->corner[i - 1].floor_volt; ++ ++ if (vreg->corner[i].open_loop_volt ++ < vreg->corner[i].floor_volt) ++ vreg->corner[i].open_loop_volt ++ = vreg->corner[i].floor_volt; ++ if (vreg->corner[i].ceiling_volt ++ < vreg->corner[i].floor_volt) ++ vreg->corner[i].ceiling_volt ++ = vreg->corner[i].floor_volt; ++ } ++ } ++ ++ return rc; ++} ++ ++/** ++ * cpr3_print_quots() - print CPR target quotients into the kernel log for ++ * debugging purposes ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: none ++ */ ++void cpr3_print_quots(struct cpr3_regulator *vreg) ++{ ++ int i, j, pos; ++ size_t buflen; ++ char *buf; ++ ++ buflen = sizeof(*buf) * CPR3_RO_COUNT * (MAX_CHARS_PER_INT + 2); ++ buf = kzalloc(buflen, GFP_KERNEL); ++ if (!buf) ++ return; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ for (j = 0, pos = 0; j < CPR3_RO_COUNT; j++) ++ pos += scnprintf(buf + pos, buflen - pos, " %u", ++ vreg->corner[i].target_quot[j]); ++ cpr3_debug(vreg, "target quots[%2d]:%s\n", i, buf); ++ } ++ ++ kfree(buf); ++} ++ ++/** ++ * cpr3_determine_part_type() - determine the part type (SS/TT/FF). ++ * ++ * qcom,cpr-part-types prop tells the number of part types for which correction ++ * voltages are different. Another prop qcom,cpr-parts-voltage will contain the ++ * open loop fuse voltage which will be compared with this part voltage ++ * and accordingly part type will de determined. ++ * ++ * if qcom,cpr-part-types has value n, then qcom,cpr-parts-voltage will be ++ * array of n - 1 elements which will contain the voltage in increasing order. ++ * This function compares the fused volatge with all these voltage and returns ++ * the first index for which the fused volatge is greater. ++ * ++ * @vreg: Pointer to the CPR3 regulator ++ * @fuse_volt: fused open loop voltage which will be compared with ++ * qcom,cpr-parts-voltage array ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_determine_part_type(struct cpr3_regulator *vreg, int fuse_volt) ++{ ++ int i, rc, len; ++ u32 volt; ++ int soc_version_major; ++ char prop_name[100]; ++ const char prop_name_def[] = "qcom,cpr-parts-voltage"; ++ const char prop_name_v2[] = "qcom,cpr-parts-voltage-v2"; ++ ++ soc_version_major = read_ipq_soc_version_major(); ++ BUG_ON(soc_version_major <= 0); ++ ++ if (of_property_read_u32(vreg->of_node, "qcom,cpr-part-types", ++ &vreg->part_type_supported)) ++ return 0; ++ ++ if (soc_version_major > 1) ++ strlcpy(prop_name, prop_name_v2, sizeof(prop_name_v2)); ++ else ++ strlcpy(prop_name, prop_name_def, sizeof(prop_name_def)); ++ ++ if (!of_find_property(vreg->of_node, prop_name, &len)) { ++ cpr3_err(vreg, "property %s is missing\n", prop_name); ++ return -EINVAL; ++ } ++ ++ if (len != (vreg->part_type_supported - 1) * sizeof(u32)) { ++ cpr3_err(vreg, "wrong len in qcom,cpr-parts-voltage\n"); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < vreg->part_type_supported - 1; i++) { ++ rc = of_property_read_u32_index(vreg->of_node, ++ prop_name, i, &volt); ++ if (rc) { ++ cpr3_err(vreg, "error reading property %s, rc=%d\n", ++ prop_name, rc); ++ return rc; ++ } ++ ++ if (fuse_volt < volt) ++ break; ++ } ++ ++ vreg->part_type = i; ++ return 0; ++} ++ ++int cpr3_determine_temp_base_open_loop_correction(struct cpr3_regulator *vreg, ++ int *fuse_volt) ++{ ++ int i, rc, prev_volt; ++ int *volt_adjust; ++ char prop_str[75]; ++ int soc_version_major = read_ipq_soc_version_major(); ++ ++ BUG_ON(soc_version_major <= 0); ++ ++ if (vreg->part_type_supported) { ++ if (soc_version_major > 1) ++ snprintf(prop_str, sizeof(prop_str), ++ "qcom,cpr-cold-temp-voltage-adjustment-v2-%d", ++ vreg->part_type); ++ else ++ snprintf(prop_str, sizeof(prop_str), ++ "qcom,cpr-cold-temp-voltage-adjustment-%d", ++ vreg->part_type); ++ } else { ++ strlcpy(prop_str, "qcom,cpr-cold-temp-voltage-adjustment", ++ sizeof(prop_str)); ++ } ++ ++ if (!of_find_property(vreg->of_node, prop_str, NULL)) { ++ /* No adjustment required. */ ++ cpr3_info(vreg, "No cold temperature adjustment required.\n"); ++ return 0; ++ } ++ ++ volt_adjust = kcalloc(vreg->fuse_corner_count, sizeof(*volt_adjust), ++ GFP_KERNEL); ++ if (!volt_adjust) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_array_property(vreg, prop_str, ++ vreg->fuse_corner_count, volt_adjust); ++ if (rc) { ++ cpr3_err(vreg, "could not load cold temp voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->fuse_corner_count; i++) { ++ if (volt_adjust[i]) { ++ prev_volt = fuse_volt[i]; ++ fuse_volt[i] += volt_adjust[i]; ++ cpr3_debug(vreg, ++ "adjusted fuse corner %d open-loop voltage: %d -> %d uV\n", ++ i, prev_volt, fuse_volt[i]); ++ } ++ } ++ ++done: ++ kfree(volt_adjust); ++ return rc; ++} ++ ++/** ++ * cpr3_can_adjust_cold_temp() - Is cold temperature adjustment available ++ * ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function checks the cold temperature threshold is available ++ * ++ * Return: true on cold temperature threshold is available, else false ++ */ ++bool cpr3_can_adjust_cold_temp(struct cpr3_regulator *vreg) ++{ ++ char prop_str[75]; ++ int soc_version_major = read_ipq_soc_version_major(); ++ ++ BUG_ON(soc_version_major <= 0); ++ ++ if (soc_version_major > 1) ++ strlcpy(prop_str, "qcom,cpr-cold-temp-threshold-v2", ++ sizeof(prop_str)); ++ else ++ strlcpy(prop_str, "qcom,cpr-cold-temp-threshold", ++ sizeof(prop_str)); ++ ++ if (!of_find_property(vreg->of_node, prop_str, NULL)) { ++ /* No adjustment required. */ ++ return false; ++ } else ++ return true; ++} ++ ++/** ++ * cpr3_get_cold_temp_threshold() - get cold temperature threshold ++ * ++ * @vreg: Pointer to the CPR3 regulator ++ * @cold_temp: cold temperature read. ++ * ++ * This function reads the cold temperature threshold below which ++ * cold temperature adjustment margins will be applied. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_get_cold_temp_threshold(struct cpr3_regulator *vreg, int *cold_temp) ++{ ++ int rc; ++ u32 temp; ++ char req_prop_str[75], prop_str[75]; ++ int soc_version_major = read_ipq_soc_version_major(); ++ ++ BUG_ON(soc_version_major <= 0); ++ ++ if (vreg->part_type_supported) { ++ if (soc_version_major > 1) ++ snprintf(req_prop_str, sizeof(req_prop_str), ++ "qcom,cpr-cold-temp-voltage-adjustment-v2-%d", ++ vreg->part_type); ++ else ++ snprintf(req_prop_str, sizeof(req_prop_str), ++ "qcom,cpr-cold-temp-voltage-adjustment-%d", ++ vreg->part_type); ++ } else { ++ strlcpy(req_prop_str, "qcom,cpr-cold-temp-voltage-adjustment", ++ sizeof(req_prop_str)); ++ } ++ ++ if (soc_version_major > 1) ++ strlcpy(prop_str, "qcom,cpr-cold-temp-threshold-v2", ++ sizeof(prop_str)); ++ else ++ strlcpy(prop_str, "qcom,cpr-cold-temp-threshold", ++ sizeof(prop_str)); ++ ++ if (!of_find_property(vreg->of_node, req_prop_str, NULL)) { ++ /* No adjustment required. */ ++ cpr3_info(vreg, "Cold temperature adjustment not required.\n"); ++ return 0; ++ } ++ ++ if (!of_find_property(vreg->of_node, prop_str, NULL)) { ++ /* No adjustment required. */ ++ cpr3_err(vreg, "Missing %s required for %s\n", ++ prop_str, req_prop_str); ++ return -EINVAL; ++ } ++ ++ rc = of_property_read_u32(vreg->of_node, prop_str, &temp); ++ if (rc) { ++ cpr3_err(vreg, "error reading property %s, rc=%d\n", ++ prop_str, rc); ++ return rc; ++ } ++ ++ *cold_temp = temp; ++ return 0; ++} ++ ++/** ++ * cpr3_adjust_fused_open_loop_voltages() - adjust the fused open-loop voltages ++ * for each fuse corner according to device tree values ++ * @vreg: Pointer to the CPR3 regulator ++ * @fuse_volt: Pointer to an array of the fused open-loop voltage ++ * values ++ * ++ * Voltage values in fuse_volt are modified in place. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_adjust_fused_open_loop_voltages(struct cpr3_regulator *vreg, ++ int *fuse_volt) ++{ ++ int i, rc, prev_volt; ++ int *volt_adjust; ++ char prop_str[75]; ++ int soc_version_major = read_ipq_soc_version_major(); ++ ++ BUG_ON(soc_version_major <= 0); ++ ++ if (vreg->part_type_supported) { ++ if (soc_version_major > 1) ++ snprintf(prop_str, sizeof(prop_str), ++ "qcom,cpr-open-loop-voltage-fuse-adjustment-v2-%d", ++ vreg->part_type); ++ else ++ snprintf(prop_str, sizeof(prop_str), ++ "qcom,cpr-open-loop-voltage-fuse-adjustment-%d", ++ vreg->part_type); ++ } else { ++ strlcpy(prop_str, "qcom,cpr-open-loop-voltage-fuse-adjustment", ++ sizeof(prop_str)); ++ } ++ ++ if (!of_find_property(vreg->of_node, prop_str, NULL)) { ++ /* No adjustment required. */ ++ return 0; ++ } ++ ++ volt_adjust = kcalloc(vreg->fuse_corner_count, sizeof(*volt_adjust), ++ GFP_KERNEL); ++ if (!volt_adjust) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_array_property(vreg, ++ prop_str, vreg->fuse_corner_count, volt_adjust); ++ if (rc) { ++ cpr3_err(vreg, "could not load open-loop fused voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->fuse_corner_count; i++) { ++ if (volt_adjust[i]) { ++ prev_volt = fuse_volt[i]; ++ fuse_volt[i] += volt_adjust[i]; ++ cpr3_debug(vreg, "adjusted fuse corner %d open-loop voltage: %d --> %d uV\n", ++ i, prev_volt, fuse_volt[i]); ++ } ++ } ++ ++done: ++ kfree(volt_adjust); ++ return rc; ++} ++ ++/** ++ * cpr3_adjust_open_loop_voltages() - adjust the open-loop voltages for each ++ * corner according to device tree values ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_adjust_open_loop_voltages(struct cpr3_regulator *vreg) ++{ ++ int i, rc, prev_volt, min_volt; ++ int *volt_adjust, *volt_diff; ++ ++ if (!of_find_property(vreg->of_node, ++ "qcom,cpr-open-loop-voltage-adjustment", NULL)) { ++ /* No adjustment required. */ ++ return 0; ++ } ++ ++ volt_adjust = kcalloc(vreg->corner_count, sizeof(*volt_adjust), ++ GFP_KERNEL); ++ volt_diff = kcalloc(vreg->corner_count, sizeof(*volt_diff), GFP_KERNEL); ++ if (!volt_adjust || !volt_diff) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,cpr-open-loop-voltage-adjustment", 1, volt_adjust); ++ if (rc) { ++ cpr3_err(vreg, "could not load open-loop voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ if (volt_adjust[i]) { ++ prev_volt = vreg->corner[i].open_loop_volt; ++ vreg->corner[i].open_loop_volt += volt_adjust[i]; ++ cpr3_debug(vreg, "adjusted corner %d open-loop voltage: %d --> %d uV\n", ++ i, prev_volt, vreg->corner[i].open_loop_volt); ++ } ++ } ++ ++ if (of_find_property(vreg->of_node, ++ "qcom,cpr-open-loop-voltage-min-diff", NULL)) { ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,cpr-open-loop-voltage-min-diff", 1, volt_diff); ++ if (rc) { ++ cpr3_err(vreg, "could not load minimum open-loop voltage differences, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ /* ++ * Ensure that open-loop voltages increase monotonically with respect ++ * to configurable minimum allowed differences. ++ */ ++ for (i = 1; i < vreg->corner_count; i++) { ++ min_volt = vreg->corner[i - 1].open_loop_volt + volt_diff[i]; ++ if (vreg->corner[i].open_loop_volt < min_volt) { ++ cpr3_debug(vreg, "adjusted corner %d open-loop voltage=%d uV < corner %d voltage=%d uV + min diff=%d uV; overriding: corner %d voltage=%d\n", ++ i, vreg->corner[i].open_loop_volt, ++ i - 1, vreg->corner[i - 1].open_loop_volt, ++ volt_diff[i], i, min_volt); ++ vreg->corner[i].open_loop_volt = min_volt; ++ } ++ } ++ ++done: ++ kfree(volt_diff); ++ kfree(volt_adjust); ++ return rc; ++} ++ ++/** ++ * cpr3_quot_adjustment() - returns the quotient adjustment value resulting from ++ * the specified voltage adjustment and RO scaling factor ++ * @ro_scale: The CPR ring oscillator (RO) scaling factor with units ++ * of QUOT/V ++ * @volt_adjust: The amount to adjust the voltage by in units of ++ * microvolts. This value may be positive or negative. ++ */ ++int cpr3_quot_adjustment(int ro_scale, int volt_adjust) ++{ ++ unsigned long long temp; ++ int quot_adjust; ++ int sign = 1; ++ ++ if (ro_scale < 0) { ++ sign = -sign; ++ ro_scale = -ro_scale; ++ } ++ ++ if (volt_adjust < 0) { ++ sign = -sign; ++ volt_adjust = -volt_adjust; ++ } ++ ++ temp = (unsigned long long)ro_scale * (unsigned long long)volt_adjust; ++ do_div(temp, 1000000); ++ ++ quot_adjust = temp; ++ quot_adjust *= sign; ++ ++ return quot_adjust; ++} ++ ++/** ++ * cpr3_voltage_adjustment() - returns the voltage adjustment value resulting ++ * from the specified quotient adjustment and RO scaling factor ++ * @ro_scale: The CPR ring oscillator (RO) scaling factor with units ++ * of QUOT/V ++ * @quot_adjust: The amount to adjust the quotient by in units of ++ * QUOT. This value may be positive or negative. ++ */ ++int cpr3_voltage_adjustment(int ro_scale, int quot_adjust) ++{ ++ unsigned long long temp; ++ int volt_adjust; ++ int sign = 1; ++ ++ if (ro_scale < 0) { ++ sign = -sign; ++ ro_scale = -ro_scale; ++ } ++ ++ if (quot_adjust < 0) { ++ sign = -sign; ++ quot_adjust = -quot_adjust; ++ } ++ ++ if (ro_scale == 0) ++ return 0; ++ ++ temp = (unsigned long long)quot_adjust * 1000000; ++ do_div(temp, ro_scale); ++ ++ volt_adjust = temp; ++ volt_adjust *= sign; ++ ++ return volt_adjust; ++} ++ ++/** ++ * cpr3_parse_closed_loop_voltage_adjustments() - load per-fuse-corner and ++ * per-corner closed-loop adjustment values from device tree ++ * @vreg: Pointer to the CPR3 regulator ++ * @ro_sel: Array of ring oscillator values selected for each ++ * fuse corner ++ * @volt_adjust: Pointer to array which will be filled with the ++ * per-corner closed-loop adjustment voltages ++ * @volt_adjust_fuse: Pointer to array which will be filled with the ++ * per-fuse-corner closed-loop adjustment voltages ++ * @ro_scale: Pointer to array which will be filled with the ++ * per-fuse-corner RO scaling factor values with units of ++ * QUOT/V ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_parse_closed_loop_voltage_adjustments( ++ struct cpr3_regulator *vreg, u64 *ro_sel, ++ int *volt_adjust, int *volt_adjust_fuse, int *ro_scale) ++{ ++ int i, rc; ++ u32 *ro_all_scale; ++ ++ char volt_adj[] = "qcom,cpr-closed-loop-voltage-adjustment"; ++ char volt_fuse_adj[] = "qcom,cpr-closed-loop-voltage-fuse-adjustment"; ++ char ro_scaling[] = "qcom,cpr-ro-scaling-factor"; ++ ++ if (!of_find_property(vreg->of_node, volt_adj, NULL) ++ && !of_find_property(vreg->of_node, volt_fuse_adj, NULL) ++ && !vreg->aging_allowed) { ++ /* No adjustment required. */ ++ return 0; ++ } else if (!of_find_property(vreg->of_node, ro_scaling, NULL)) { ++ cpr3_err(vreg, "Missing %s required for closed-loop voltage adjustment.\n", ++ ro_scaling); ++ return -EINVAL; ++ } ++ ++ ro_all_scale = kcalloc(vreg->fuse_corner_count * CPR3_RO_COUNT, ++ sizeof(*ro_all_scale), GFP_KERNEL); ++ if (!ro_all_scale) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_array_property(vreg, ro_scaling, ++ vreg->fuse_corner_count * CPR3_RO_COUNT, ro_all_scale); ++ if (rc) { ++ cpr3_err(vreg, "could not load RO scaling factors, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->fuse_corner_count; i++) ++ ro_scale[i] = ro_all_scale[i * CPR3_RO_COUNT + ro_sel[i]]; ++ ++ for (i = 0; i < vreg->corner_count; i++) ++ memcpy(vreg->corner[i].ro_scale, ++ &ro_all_scale[vreg->corner[i].cpr_fuse_corner * CPR3_RO_COUNT], ++ sizeof(*ro_all_scale) * CPR3_RO_COUNT); ++ ++ if (of_find_property(vreg->of_node, volt_fuse_adj, NULL)) { ++ rc = cpr3_parse_array_property(vreg, volt_fuse_adj, ++ vreg->fuse_corner_count, volt_adjust_fuse); ++ if (rc) { ++ cpr3_err(vreg, "could not load closed-loop fused voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ if (of_find_property(vreg->of_node, volt_adj, NULL)) { ++ rc = cpr3_parse_corner_array_property(vreg, volt_adj, ++ 1, volt_adjust); ++ if (rc) { ++ cpr3_err(vreg, "could not load closed-loop voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++done: ++ kfree(ro_all_scale); ++ return rc; ++} ++ ++/** ++ * cpr3_apm_init() - initialize APM data for a CPR3 controller ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * This function loads memory array power mux (APM) data from device tree ++ * if it is present and requests a handle to the appropriate APM controller ++ * device. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_apm_init(struct cpr3_controller *ctrl) ++{ ++ struct device_node *node = ctrl->dev->of_node; ++ int rc; ++ ++ if (!of_find_property(node, "qcom,apm-ctrl", NULL)) { ++ /* No APM used */ ++ return 0; ++ } ++ ++ ctrl->apm = msm_apm_ctrl_dev_get(ctrl->dev); ++ if (IS_ERR(ctrl->apm)) { ++ rc = PTR_ERR(ctrl->apm); ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "APM get failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ rc = of_property_read_u32(node, "qcom,apm-threshold-voltage", ++ &ctrl->apm_threshold_volt); ++ if (rc) { ++ cpr3_err(ctrl, "error reading qcom,apm-threshold-voltage, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ctrl->apm_threshold_volt ++ = CPR3_ROUND(ctrl->apm_threshold_volt, ctrl->step_volt); ++ ++ /* No error check since this is an optional property. */ ++ of_property_read_u32(node, "qcom,apm-hysteresis-voltage", ++ &ctrl->apm_adj_volt); ++ ctrl->apm_adj_volt = CPR3_ROUND(ctrl->apm_adj_volt, ctrl->step_volt); ++ ++ ctrl->apm_high_supply = MSM_APM_SUPPLY_APCC; ++ ctrl->apm_low_supply = MSM_APM_SUPPLY_MX; ++ ++ return 0; ++} ++ ++/** ++ * cpr3_mem_acc_init() - initialize mem-acc regulator data for ++ * a CPR3 regulator ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_mem_acc_init(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ u32 *temp; ++ int i, rc; ++ ++ if (!ctrl->mem_acc_regulator) { ++ cpr3_info(ctrl, "not using memory accelerator regulator\n"); ++ return 0; ++ } ++ ++ temp = kcalloc(vreg->corner_count, sizeof(*temp), GFP_KERNEL); ++ if (!temp) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_corner_array_property(vreg, "qcom,mem-acc-voltage", ++ 1, temp); ++ if (rc) { ++ cpr3_err(ctrl, "could not load mem-acc corners, rc=%d\n", rc); ++ } else { ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].mem_acc_volt = temp[i]; ++ } ++ ++ kfree(temp); ++ return rc; ++} ++ ++/** ++ * cpr4_load_core_and_temp_adj() - parse amount of voltage adjustment for ++ * per-online-core and per-temperature voltage adjustment for a ++ * given corner or corner band from device tree. ++ * @vreg: Pointer to the CPR3 regulator ++ * @num: Corner number or corner band number ++ * @use_corner_band: Boolean indicating if the CPR3 regulator supports ++ * adjustments per corner band ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_load_core_and_temp_adj(struct cpr3_regulator *vreg, ++ int num, bool use_corner_band) ++{ ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ struct cpr4_sdelta *sdelta; ++ int sdelta_size, i, j, pos, rc = 0; ++ char str[75]; ++ size_t buflen; ++ char *buf; ++ ++ sdelta = use_corner_band ? vreg->corner_band[num].sdelta : ++ vreg->corner[num].sdelta; ++ ++ if (!sdelta->allow_core_count_adj && !sdelta->allow_temp_adj) { ++ /* corner doesn't need sdelta table */ ++ sdelta->max_core_count = 0; ++ sdelta->temp_band_count = 0; ++ return rc; ++ } ++ ++ sdelta_size = sdelta->max_core_count * sdelta->temp_band_count; ++ if (use_corner_band) ++ snprintf(str, sizeof(str), ++ "corner_band=%d core_config_count=%d temp_band_count=%d sdelta_size=%d\n", ++ num, sdelta->max_core_count, ++ sdelta->temp_band_count, sdelta_size); ++ else ++ snprintf(str, sizeof(str), ++ "corner=%d core_config_count=%d temp_band_count=%d sdelta_size=%d\n", ++ num, sdelta->max_core_count, ++ sdelta->temp_band_count, sdelta_size); ++ ++ cpr3_debug(vreg, "%s", str); ++ ++ sdelta->table = devm_kcalloc(ctrl->dev, sdelta_size, ++ sizeof(*sdelta->table), GFP_KERNEL); ++ if (!sdelta->table) ++ return -ENOMEM; ++ ++ if (use_corner_band) ++ snprintf(str, sizeof(str), ++ "qcom,cpr-corner-band%d-temp-core-voltage-adjustment", ++ num + CPR3_CORNER_OFFSET); ++ else ++ snprintf(str, sizeof(str), ++ "qcom,cpr-corner%d-temp-core-voltage-adjustment", ++ num + CPR3_CORNER_OFFSET); ++ ++ rc = cpr3_parse_array_property(vreg, str, sdelta_size, ++ sdelta->table); ++ if (rc) { ++ cpr3_err(vreg, "could not load %s, rc=%d\n", str, rc); ++ return rc; ++ } ++ ++ /* ++ * Convert sdelta margins from uV to PMIC steps and apply negation to ++ * follow the SDELTA register semantics. ++ */ ++ for (i = 0; i < sdelta_size; i++) ++ sdelta->table[i] = -(sdelta->table[i] / ctrl->step_volt); ++ ++ buflen = sizeof(*buf) * sdelta_size * (MAX_CHARS_PER_INT + 2); ++ buf = kzalloc(buflen, GFP_KERNEL); ++ if (!buf) ++ return rc; ++ ++ for (i = 0; i < sdelta->max_core_count; i++) { ++ for (j = 0, pos = 0; j < sdelta->temp_band_count; j++) ++ pos += scnprintf(buf + pos, buflen - pos, " %u", ++ sdelta->table[i * sdelta->temp_band_count + j]); ++ cpr3_debug(vreg, "sdelta[%d]:%s\n", i, buf); ++ } ++ ++ kfree(buf); ++ return rc; ++} ++ ++/** ++ * cpr4_parse_core_count_temp_voltage_adj() - parse configuration data for ++ * per-online-core and per-temperature voltage adjustment for ++ * a CPR3 regulator from device tree. ++ * @vreg: Pointer to the CPR3 regulator ++ * @use_corner_band: Boolean indicating if the CPR3 regulator supports ++ * adjustments per corner band ++ * ++ * This function supports parsing of per-online-core and per-temperature ++ * adjustments per corner or per corner band. CPR controllers which support ++ * corner bands apply the same adjustments to all corners within a corner band. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr4_parse_core_count_temp_voltage_adj( ++ struct cpr3_regulator *vreg, bool use_corner_band) ++{ ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ struct device_node *node = vreg->of_node; ++ struct cpr3_corner *corner; ++ struct cpr4_sdelta *sdelta; ++ int i, sdelta_table_count, rc = 0; ++ int *allow_core_count_adj = NULL, *allow_temp_adj = NULL; ++ char prop_str[75]; ++ ++ if (of_find_property(node, use_corner_band ? ++ "qcom,corner-band-allow-temp-adjustment" ++ : "qcom,corner-allow-temp-adjustment", NULL)) { ++ if (!ctrl->allow_temp_adj) { ++ cpr3_err(ctrl, "Temperature adjustment configurations missing\n"); ++ return -EINVAL; ++ } ++ ++ vreg->allow_temp_adj = true; ++ } ++ ++ if (of_find_property(node, use_corner_band ? ++ "qcom,corner-band-allow-core-count-adjustment" ++ : "qcom,corner-allow-core-count-adjustment", ++ NULL)) { ++ rc = of_property_read_u32(node, "qcom,max-core-count", ++ &vreg->max_core_count); ++ if (rc) { ++ cpr3_err(vreg, "error reading qcom,max-core-count, rc=%d\n", ++ rc); ++ return -EINVAL; ++ } ++ ++ vreg->allow_core_count_adj = true; ++ ctrl->allow_core_count_adj = true; ++ } ++ ++ if (!vreg->allow_temp_adj && !vreg->allow_core_count_adj) { ++ /* ++ * Both per-online-core and temperature based adjustments are ++ * disabled for this regulator. ++ */ ++ return 0; ++ } else if (!vreg->allow_core_count_adj) { ++ /* ++ * Only per-temperature voltage adjusments are allowed. ++ * Keep max core count value as 1 to allocate SDELTA. ++ */ ++ vreg->max_core_count = 1; ++ } ++ ++ if (vreg->allow_core_count_adj) { ++ allow_core_count_adj = kcalloc(vreg->corner_count, ++ sizeof(*allow_core_count_adj), ++ GFP_KERNEL); ++ if (!allow_core_count_adj) ++ return -ENOMEM; ++ ++ snprintf(prop_str, sizeof(prop_str), "%s", use_corner_band ? ++ "qcom,corner-band-allow-core-count-adjustment" : ++ "qcom,corner-allow-core-count-adjustment"); ++ ++ rc = use_corner_band ? ++ cpr3_parse_corner_band_array_property(vreg, prop_str, ++ 1, allow_core_count_adj) : ++ cpr3_parse_corner_array_property(vreg, prop_str, ++ 1, allow_core_count_adj); ++ if (rc) { ++ cpr3_err(vreg, "error reading %s, rc=%d\n", prop_str, ++ rc); ++ goto done; ++ } ++ } ++ ++ if (vreg->allow_temp_adj) { ++ allow_temp_adj = kcalloc(vreg->corner_count, ++ sizeof(*allow_temp_adj), GFP_KERNEL); ++ if (!allow_temp_adj) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ snprintf(prop_str, sizeof(prop_str), "%s", use_corner_band ? ++ "qcom,corner-band-allow-temp-adjustment" : ++ "qcom,corner-allow-temp-adjustment"); ++ ++ rc = use_corner_band ? ++ cpr3_parse_corner_band_array_property(vreg, prop_str, ++ 1, allow_temp_adj) : ++ cpr3_parse_corner_array_property(vreg, prop_str, ++ 1, allow_temp_adj); ++ if (rc) { ++ cpr3_err(vreg, "error reading %s, rc=%d\n", prop_str, ++ rc); ++ goto done; ++ } ++ } ++ ++ sdelta_table_count = use_corner_band ? vreg->corner_band_count : ++ vreg->corner_count; ++ ++ for (i = 0; i < sdelta_table_count; i++) { ++ sdelta = devm_kzalloc(ctrl->dev, sizeof(*corner->sdelta), ++ GFP_KERNEL); ++ if (!sdelta) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ if (allow_core_count_adj) ++ sdelta->allow_core_count_adj = allow_core_count_adj[i]; ++ if (allow_temp_adj) ++ sdelta->allow_temp_adj = allow_temp_adj[i]; ++ sdelta->max_core_count = vreg->max_core_count; ++ sdelta->temp_band_count = ctrl->temp_band_count; ++ ++ if (use_corner_band) ++ vreg->corner_band[i].sdelta = sdelta; ++ else ++ vreg->corner[i].sdelta = sdelta; ++ ++ rc = cpr4_load_core_and_temp_adj(vreg, i, use_corner_band); ++ if (rc) { ++ cpr3_err(vreg, "corner/band %d core and temp adjustment loading failed, rc=%d\n", ++ i, rc); ++ goto done; ++ } ++ } ++ ++done: ++ kfree(allow_core_count_adj); ++ kfree(allow_temp_adj); ++ ++ return rc; ++} ++ ++/** ++ * cprh_adjust_voltages_for_apm() - adjust per-corner floor and ceiling voltages ++ * so that they do not overlap the APM threshold voltage. ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * The memory array power mux (APM) must be configured for a specific supply ++ * based upon where the VDD voltage lies with respect to the APM threshold ++ * voltage. When using CPR hardware closed-loop, the voltage may vary anywhere ++ * between the floor and ceiling voltage without software notification. ++ * Therefore, it is required that the floor to ceiling range for every corner ++ * not intersect the APM threshold voltage. This function adjusts the floor to ++ * ceiling range for each corner which violates this requirement. ++ * ++ * The following algorithm is applied: ++ * if floor < threshold <= ceiling: ++ * if open_loop >= threshold, then floor = threshold - adj ++ * else ceiling = threshold - step ++ * where: ++ * adj = APM hysteresis voltage established to minimize the number of ++ * corners with artificially increased floor voltages ++ * step = voltage in microvolts of a single step of the VDD supply ++ * ++ * The open-loop voltage is also bounded by the new floor or ceiling value as ++ * needed. ++ * ++ * Return: none ++ */ ++void cprh_adjust_voltages_for_apm(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ struct cpr3_corner *corner; ++ int i, adj, threshold, prev_ceiling, prev_floor, prev_open_loop; ++ ++ if (!ctrl->apm_threshold_volt) { ++ /* APM not being used. */ ++ return; ++ } ++ ++ ctrl->apm_threshold_volt = CPR3_ROUND(ctrl->apm_threshold_volt, ++ ctrl->step_volt); ++ ctrl->apm_adj_volt = CPR3_ROUND(ctrl->apm_adj_volt, ctrl->step_volt); ++ ++ threshold = ctrl->apm_threshold_volt; ++ adj = ctrl->apm_adj_volt; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ corner = &vreg->corner[i]; ++ ++ if (threshold <= corner->floor_volt ++ || threshold > corner->ceiling_volt) ++ continue; ++ ++ prev_floor = corner->floor_volt; ++ prev_ceiling = corner->ceiling_volt; ++ prev_open_loop = corner->open_loop_volt; ++ ++ if (corner->open_loop_volt >= threshold) { ++ corner->floor_volt = max(corner->floor_volt, ++ threshold - adj); ++ if (corner->open_loop_volt < corner->floor_volt) ++ corner->open_loop_volt = corner->floor_volt; ++ } else { ++ corner->ceiling_volt = threshold - ctrl->step_volt; ++ } ++ ++ if (corner->floor_volt != prev_floor ++ || corner->ceiling_volt != prev_ceiling ++ || corner->open_loop_volt != prev_open_loop) ++ cpr3_debug(vreg, "APM threshold=%d, APM adj=%d changed corner %d voltages; prev: floor=%d, ceiling=%d, open-loop=%d; new: floor=%d, ceiling=%d, open-loop=%d\n", ++ threshold, adj, i, prev_floor, prev_ceiling, ++ prev_open_loop, corner->floor_volt, ++ corner->ceiling_volt, corner->open_loop_volt); ++ } ++} ++ ++/** ++ * cprh_adjust_voltages_for_mem_acc() - adjust per-corner floor and ceiling ++ * voltages so that they do not intersect the MEM ACC threshold ++ * voltage ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * The following algorithm is applied: ++ * if floor < threshold <= ceiling: ++ * if open_loop >= threshold, then floor = threshold ++ * else ceiling = threshold - step ++ * where: ++ * step = voltage in microvolts of a single step of the VDD supply ++ * ++ * The open-loop voltage is also bounded by the new floor or ceiling value as ++ * needed. ++ * ++ * Return: none ++ */ ++void cprh_adjust_voltages_for_mem_acc(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ struct cpr3_corner *corner; ++ int i, threshold, prev_ceiling, prev_floor, prev_open_loop; ++ ++ if (!ctrl->mem_acc_threshold_volt) { ++ /* MEM ACC not being used. */ ++ return; ++ } ++ ++ ctrl->mem_acc_threshold_volt = CPR3_ROUND(ctrl->mem_acc_threshold_volt, ++ ctrl->step_volt); ++ ++ threshold = ctrl->mem_acc_threshold_volt; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ corner = &vreg->corner[i]; ++ ++ if (threshold <= corner->floor_volt ++ || threshold > corner->ceiling_volt) ++ continue; ++ ++ prev_floor = corner->floor_volt; ++ prev_ceiling = corner->ceiling_volt; ++ prev_open_loop = corner->open_loop_volt; ++ ++ if (corner->open_loop_volt >= threshold) { ++ corner->floor_volt = max(corner->floor_volt, threshold); ++ if (corner->open_loop_volt < corner->floor_volt) ++ corner->open_loop_volt = corner->floor_volt; ++ } else { ++ corner->ceiling_volt = threshold - ctrl->step_volt; ++ } ++ ++ if (corner->floor_volt != prev_floor ++ || corner->ceiling_volt != prev_ceiling ++ || corner->open_loop_volt != prev_open_loop) ++ cpr3_debug(vreg, "MEM ACC threshold=%d changed corner %d voltages; prev: floor=%d, ceiling=%d, open-loop=%d; new: floor=%d, ceiling=%d, open-loop=%d\n", ++ threshold, i, prev_floor, prev_ceiling, ++ prev_open_loop, corner->floor_volt, ++ corner->ceiling_volt, corner->open_loop_volt); ++ } ++} ++ ++/** ++ * cpr3_apply_closed_loop_offset_voltages() - modify the closed-loop voltage ++ * adjustments by the amounts that are needed for this ++ * fuse combo ++ * @vreg: Pointer to the CPR3 regulator ++ * @volt_adjust: Array of closed-loop voltage adjustment values of length ++ * vreg->corner_count which is further adjusted based upon ++ * offset voltage fuse values. ++ * @fuse_volt_adjust: Fused closed-loop voltage adjustment values of length ++ * vreg->fuse_corner_count. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr3_apply_closed_loop_offset_voltages(struct cpr3_regulator *vreg, ++ int *volt_adjust, int *fuse_volt_adjust) ++{ ++ u32 *corner_map; ++ int rc = 0, i; ++ ++ if (!of_find_property(vreg->of_node, ++ "qcom,cpr-fused-closed-loop-voltage-adjustment-map", NULL)) { ++ /* No closed-loop offset required. */ ++ return 0; ++ } ++ ++ corner_map = kcalloc(vreg->corner_count, sizeof(*corner_map), ++ GFP_KERNEL); ++ if (!corner_map) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,cpr-fused-closed-loop-voltage-adjustment-map", ++ 1, corner_map); ++ if (rc) ++ goto done; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ if (corner_map[i] == 0) { ++ continue; ++ } else if (corner_map[i] > vreg->fuse_corner_count) { ++ cpr3_err(vreg, "corner %d mapped to invalid fuse corner: %u\n", ++ i, corner_map[i]); ++ rc = -EINVAL; ++ goto done; ++ } ++ ++ volt_adjust[i] += fuse_volt_adjust[corner_map[i] - 1]; ++ } ++ ++done: ++ kfree(corner_map); ++ return rc; ++} ++ ++/** ++ * cpr3_enforce_inc_quotient_monotonicity() - Ensure that target quotients ++ * increase monotonically from lower to higher corners ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static void cpr3_enforce_inc_quotient_monotonicity(struct cpr3_regulator *vreg) ++{ ++ int i, j; ++ ++ for (i = 1; i < vreg->corner_count; i++) { ++ for (j = 0; j < CPR3_RO_COUNT; j++) { ++ if (vreg->corner[i].target_quot[j] ++ && vreg->corner[i].target_quot[j] ++ < vreg->corner[i - 1].target_quot[j]) { ++ cpr3_debug(vreg, "corner %d RO%u target quot=%u < corner %d RO%u target quot=%u; overriding: corner %d RO%u target quot=%u\n", ++ i, j, ++ vreg->corner[i].target_quot[j], ++ i - 1, j, ++ vreg->corner[i - 1].target_quot[j], ++ i, j, ++ vreg->corner[i - 1].target_quot[j]); ++ vreg->corner[i].target_quot[j] ++ = vreg->corner[i - 1].target_quot[j]; ++ } ++ } ++ } ++} ++ ++/** ++ * cpr3_enforce_dec_quotient_monotonicity() - Ensure that target quotients ++ * decrease monotonically from higher to lower corners ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static void cpr3_enforce_dec_quotient_monotonicity(struct cpr3_regulator *vreg) ++{ ++ int i, j; ++ ++ for (i = vreg->corner_count - 2; i >= 0; i--) { ++ for (j = 0; j < CPR3_RO_COUNT; j++) { ++ if (vreg->corner[i + 1].target_quot[j] ++ && vreg->corner[i].target_quot[j] ++ > vreg->corner[i + 1].target_quot[j]) { ++ cpr3_debug(vreg, "corner %d RO%u target quot=%u > corner %d RO%u target quot=%u; overriding: corner %d RO%u target quot=%u\n", ++ i, j, ++ vreg->corner[i].target_quot[j], ++ i + 1, j, ++ vreg->corner[i + 1].target_quot[j], ++ i, j, ++ vreg->corner[i + 1].target_quot[j]); ++ vreg->corner[i].target_quot[j] ++ = vreg->corner[i + 1].target_quot[j]; ++ } ++ } ++ } ++} ++ ++/** ++ * _cpr3_adjust_target_quotients() - adjust the target quotients for each ++ * corner of the regulator according to input adjustment and ++ * scaling arrays ++ * @vreg: Pointer to the CPR3 regulator ++ * @volt_adjust: Pointer to an array of closed-loop voltage adjustments ++ * with units of microvolts. The array must have ++ * vreg->corner_count number of elements. ++ * @ro_scale: Pointer to a flattened 2D array of RO scaling factors. ++ * The array must have an inner dimension of CPR3_RO_COUNT ++ * and an outer dimension of vreg->corner_count ++ * @label: Null terminated string providing a label for the type ++ * of adjustment. ++ * ++ * Return: true if any corners received a positive voltage adjustment (> 0), ++ * else false ++ */ ++static bool _cpr3_adjust_target_quotients(struct cpr3_regulator *vreg, ++ const int *volt_adjust, const int *ro_scale, const char *label) ++{ ++ int i, j, quot_adjust; ++ bool is_increasing = false; ++ u32 prev_quot; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ for (j = 0; j < CPR3_RO_COUNT; j++) { ++ if (vreg->corner[i].target_quot[j]) { ++ quot_adjust = cpr3_quot_adjustment( ++ ro_scale[i * CPR3_RO_COUNT + j], ++ volt_adjust[i]); ++ if (quot_adjust) { ++ prev_quot = vreg->corner[i]. ++ target_quot[j]; ++ vreg->corner[i].target_quot[j] ++ += quot_adjust; ++ cpr3_debug(vreg, "adjusted corner %d RO%d target quot %s: %u --> %u (%d uV)\n", ++ i, j, label, prev_quot, ++ vreg->corner[i].target_quot[j], ++ volt_adjust[i]); ++ } ++ } ++ } ++ if (volt_adjust[i] > 0) ++ is_increasing = true; ++ } ++ ++ return is_increasing; ++} ++ ++/** ++ * cpr3_adjust_target_quotients() - adjust the target quotients for each ++ * corner according to device tree values and fuse values ++ * @vreg: Pointer to the CPR3 regulator ++ * @fuse_volt_adjust: Fused closed-loop voltage adjustment values of length ++ * vreg->fuse_corner_count. This parameter could be null ++ * pointer when no fused adjustments are needed. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++int cpr3_adjust_target_quotients(struct cpr3_regulator *vreg, ++ int *fuse_volt_adjust) ++{ ++ int i, rc; ++ int *volt_adjust, *ro_scale; ++ bool explicit_adjustment, fused_adjustment, is_increasing; ++ ++ explicit_adjustment = of_find_property(vreg->of_node, ++ "qcom,cpr-closed-loop-voltage-adjustment", NULL); ++ fused_adjustment = of_find_property(vreg->of_node, ++ "qcom,cpr-fused-closed-loop-voltage-adjustment-map", NULL); ++ ++ if (!explicit_adjustment && !fused_adjustment && !vreg->aging_allowed) { ++ /* No adjustment required. */ ++ return 0; ++ } else if (!of_find_property(vreg->of_node, ++ "qcom,cpr-ro-scaling-factor", NULL)) { ++ cpr3_err(vreg, "qcom,cpr-ro-scaling-factor is required for closed-loop voltage adjustment, but is missing\n"); ++ return -EINVAL; ++ } ++ ++ volt_adjust = kcalloc(vreg->corner_count, sizeof(*volt_adjust), ++ GFP_KERNEL); ++ ro_scale = kcalloc(vreg->corner_count * CPR3_RO_COUNT, ++ sizeof(*ro_scale), GFP_KERNEL); ++ if (!volt_adjust || !ro_scale) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,cpr-ro-scaling-factor", CPR3_RO_COUNT, ro_scale); ++ if (rc) { ++ cpr3_err(vreg, "could not load RO scaling factors, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->corner_count; i++) ++ memcpy(vreg->corner[i].ro_scale, &ro_scale[i * CPR3_RO_COUNT], ++ sizeof(*ro_scale) * CPR3_RO_COUNT); ++ ++ if (explicit_adjustment) { ++ rc = cpr3_parse_corner_array_property(vreg, ++ "qcom,cpr-closed-loop-voltage-adjustment", ++ 1, volt_adjust); ++ if (rc) { ++ cpr3_err(vreg, "could not load closed-loop voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ _cpr3_adjust_target_quotients(vreg, volt_adjust, ro_scale, ++ "from DT"); ++ cpr3_enforce_inc_quotient_monotonicity(vreg); ++ } ++ ++ if (fused_adjustment && fuse_volt_adjust) { ++ memset(volt_adjust, 0, ++ sizeof(*volt_adjust) * vreg->corner_count); ++ ++ rc = cpr3_apply_closed_loop_offset_voltages(vreg, volt_adjust, ++ fuse_volt_adjust); ++ if (rc) { ++ cpr3_err(vreg, "could not apply fused closed-loop voltage reductions, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ is_increasing = _cpr3_adjust_target_quotients(vreg, volt_adjust, ++ ro_scale, "from fuse"); ++ if (is_increasing) ++ cpr3_enforce_inc_quotient_monotonicity(vreg); ++ else ++ cpr3_enforce_dec_quotient_monotonicity(vreg); ++ } ++ ++done: ++ kfree(volt_adjust); ++ kfree(ro_scale); ++ return rc; ++} +--- /dev/null ++++ b/drivers/regulator/cpr4-apss-regulator.c +@@ -0,0 +1,1819 @@ ++/* ++ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#define pr_fmt(fmt) "%s: " fmt, __func__ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "cpr3-regulator.h" ++ ++#define IPQ807x_APSS_FUSE_CORNERS 4 ++#define IPQ817x_APPS_FUSE_CORNERS 2 ++#define IPQ6018_APSS_FUSE_CORNERS 4 ++#define IPQ9574_APSS_FUSE_CORNERS 4 ++ ++u32 g_valid_fuse_count = IPQ807x_APSS_FUSE_CORNERS; ++ ++/** ++ * struct cpr4_ipq807x_apss_fuses - APSS specific fuse data for IPQ807x ++ * @ro_sel: Ring oscillator select fuse parameter value for each ++ * fuse corner ++ * @init_voltage: Initial (i.e. open-loop) voltage fuse parameter value ++ * for each fuse corner (raw, not converted to a voltage) ++ * @target_quot: CPR target quotient fuse parameter value for each fuse ++ * corner ++ * @quot_offset: CPR target quotient offset fuse parameter value for each ++ * fuse corner (raw, not unpacked) used for target quotient ++ * interpolation ++ * @speed_bin: Application processor speed bin fuse parameter value for ++ * the given chip ++ * @cpr_fusing_rev: CPR fusing revision fuse parameter value ++ * @boost_cfg: CPR boost configuration fuse parameter value ++ * @boost_voltage: CPR boost voltage fuse parameter value (raw, not ++ * converted to a voltage) ++ * ++ * This struct holds the values for all of the fuses read from memory. ++ */ ++struct cpr4_ipq807x_apss_fuses { ++ u64 ro_sel[IPQ807x_APSS_FUSE_CORNERS]; ++ u64 init_voltage[IPQ807x_APSS_FUSE_CORNERS]; ++ u64 target_quot[IPQ807x_APSS_FUSE_CORNERS]; ++ u64 quot_offset[IPQ807x_APSS_FUSE_CORNERS]; ++ u64 speed_bin; ++ u64 cpr_fusing_rev; ++ u64 boost_cfg; ++ u64 boost_voltage; ++ u64 misc; ++}; ++ ++/* ++ * fuse combo = fusing revision + 8 * (speed bin) ++ * where: fusing revision = 0 - 7 and speed bin = 0 - 7 ++ */ ++#define CPR4_IPQ807x_APSS_FUSE_COMBO_COUNT 64 ++ ++/* ++ * Constants which define the name of each fuse corner. ++ */ ++enum cpr4_ipq807x_apss_fuse_corner { ++ CPR4_IPQ807x_APSS_FUSE_CORNER_SVS = 0, ++ CPR4_IPQ807x_APSS_FUSE_CORNER_NOM = 1, ++ CPR4_IPQ807x_APSS_FUSE_CORNER_TURBO = 2, ++ CPR4_IPQ807x_APSS_FUSE_CORNER_STURBO = 3, ++}; ++ ++static const char * const cpr4_ipq807x_apss_fuse_corner_name[] = { ++ [CPR4_IPQ807x_APSS_FUSE_CORNER_SVS] = "SVS", ++ [CPR4_IPQ807x_APSS_FUSE_CORNER_NOM] = "NOM", ++ [CPR4_IPQ807x_APSS_FUSE_CORNER_TURBO] = "TURBO", ++ [CPR4_IPQ807x_APSS_FUSE_CORNER_STURBO] = "STURBO", ++}; ++ ++/* ++ * IPQ807x APSS fuse parameter locations: ++ * ++ * Structs are organized with the following dimensions: ++ * Outer: 0 to 3 for fuse corners from lowest to highest corner ++ * Inner: large enough to hold the longest set of parameter segments which ++ * fully defines a fuse parameter, +1 (for NULL termination). ++ * Each segment corresponds to a contiguous group of bits from a ++ * single fuse row. These segments are concatentated together in ++ * order to form the full fuse parameter value. The segments for ++ * a given parameter may correspond to different fuse rows. ++ */ ++static struct cpr3_fuse_param ++ipq807x_apss_ro_sel_param[IPQ807x_APSS_FUSE_CORNERS][2] = { ++ {{73, 8, 11}, {} }, ++ {{73, 4, 7}, {} }, ++ {{73, 0, 3}, {} }, ++ {{73, 12, 15}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq807x_apss_init_voltage_param[IPQ807x_APSS_FUSE_CORNERS][2] = { ++ {{71, 18, 23}, {} }, ++ {{71, 12, 17}, {} }, ++ {{71, 6, 11}, {} }, ++ {{71, 0, 5}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq807x_apss_target_quot_param[IPQ807x_APSS_FUSE_CORNERS][2] = { ++ {{72, 32, 43}, {} }, ++ {{72, 20, 31}, {} }, ++ {{72, 8, 19}, {} }, ++ {{72, 44, 55}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq807x_apss_quot_offset_param[IPQ807x_APSS_FUSE_CORNERS][2] = { ++ {{} }, ++ {{71, 46, 52}, {} }, ++ {{71, 39, 45}, {} }, ++ {{71, 32, 38}, {} }, ++}; ++ ++static struct cpr3_fuse_param ipq807x_cpr_fusing_rev_param[] = { ++ {71, 53, 55}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq807x_apss_speed_bin_param[] = { ++ {36, 40, 42}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq807x_cpr_boost_fuse_cfg_param[] = { ++ {36, 43, 45}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq807x_apss_boost_fuse_volt_param[] = { ++ {71, 0, 5}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq807x_misc_fuse_volt_adj_param[] = { ++ {36, 54, 54}, ++ {}, ++}; ++ ++static struct cpr3_fuse_parameters ipq807x_fuse_params = { ++ .apss_ro_sel_param = ipq807x_apss_ro_sel_param, ++ .apss_init_voltage_param = ipq807x_apss_init_voltage_param, ++ .apss_target_quot_param = ipq807x_apss_target_quot_param, ++ .apss_quot_offset_param = ipq807x_apss_quot_offset_param, ++ .cpr_fusing_rev_param = ipq807x_cpr_fusing_rev_param, ++ .apss_speed_bin_param = ipq807x_apss_speed_bin_param, ++ .cpr_boost_fuse_cfg_param = ipq807x_cpr_boost_fuse_cfg_param, ++ .apss_boost_fuse_volt_param = ipq807x_apss_boost_fuse_volt_param, ++ .misc_fuse_volt_adj_param = ipq807x_misc_fuse_volt_adj_param ++}; ++ ++/* ++ * The number of possible values for misc fuse is ++ * 2^(#bits defined for misc fuse) ++ */ ++#define IPQ807x_MISC_FUSE_VAL_COUNT BIT(1) ++ ++/* ++ * Open loop voltage fuse reference voltages in microvolts for IPQ807x ++ */ ++static int ipq807x_apss_fuse_ref_volt ++ [IPQ807x_APSS_FUSE_CORNERS] = { ++ 720000, ++ 864000, ++ 992000, ++ 1064000, ++}; ++ ++#define IPQ807x_APSS_FUSE_STEP_VOLT 8000 ++#define IPQ807x_APSS_VOLTAGE_FUSE_SIZE 6 ++#define IPQ807x_APSS_QUOT_OFFSET_SCALE 5 ++ ++#define IPQ807x_APSS_CPR_SENSOR_COUNT 6 ++ ++#define IPQ807x_APSS_CPR_CLOCK_RATE 19200000 ++ ++#define IPQ807x_APSS_MAX_TEMP_POINTS 3 ++#define IPQ807x_APSS_TEMP_SENSOR_ID_START 4 ++#define IPQ807x_APSS_TEMP_SENSOR_ID_END 13 ++/* ++ * Boost voltage fuse reference and ceiling voltages in microvolts for ++ * IPQ807x. ++ */ ++#define IPQ807x_APSS_BOOST_FUSE_REF_VOLT 1140000 ++#define IPQ807x_APSS_BOOST_CEILING_VOLT 1140000 ++#define IPQ807x_APSS_BOOST_FLOOR_VOLT 900000 ++#define MAX_BOOST_CONFIG_FUSE_VALUE 8 ++ ++#define IPQ807x_APSS_CPR_SDELTA_CORE_COUNT 15 ++ ++#define IPQ807x_APSS_CPR_TCSR_START 8 ++#define IPQ807x_APSS_CPR_TCSR_END 9 ++ ++/* ++ * Array of integer values mapped to each of the boost config fuse values to ++ * indicate boost enable/disable status. ++ */ ++static bool boost_fuse[MAX_BOOST_CONFIG_FUSE_VALUE] = {0, 1, 1, 1, 1, 1, 1, 1}; ++ ++/* ++ * IPQ6018 (Few parameters are changed, remaining are same as IPQ807x) ++ */ ++#define IPQ6018_APSS_FUSE_STEP_VOLT 12500 ++#define IPQ6018_APSS_CPR_CLOCK_RATE 24000000 ++ ++static struct cpr3_fuse_param ++ipq6018_apss_ro_sel_param[IPQ6018_APSS_FUSE_CORNERS][2] = { ++ {{75, 8, 11}, {} }, ++ {{75, 4, 7}, {} }, ++ {{75, 0, 3}, {} }, ++ {{75, 12, 15}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq6018_apss_init_voltage_param[IPQ6018_APSS_FUSE_CORNERS][2] = { ++ {{73, 18, 23}, {} }, ++ {{73, 12, 17}, {} }, ++ {{73, 6, 11}, {} }, ++ {{73, 0, 5}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq6018_apss_target_quot_param[IPQ6018_APSS_FUSE_CORNERS][2] = { ++ {{74, 32, 43}, {} }, ++ {{74, 20, 31}, {} }, ++ {{74, 8, 19}, {} }, ++ {{74, 44, 55}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq6018_apss_quot_offset_param[IPQ6018_APSS_FUSE_CORNERS][2] = { ++ {{} }, ++ {{73, 48, 55}, {} }, ++ {{73, 40, 47}, {} }, ++ {{73, 32, 39}, {} }, ++}; ++ ++static struct cpr3_fuse_param ipq6018_cpr_fusing_rev_param[] = { ++ {75, 16, 18}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq6018_apss_speed_bin_param[] = { ++ {36, 40, 42}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq6018_cpr_boost_fuse_cfg_param[] = { ++ {36, 43, 45}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq6018_apss_boost_fuse_volt_param[] = { ++ {73, 0, 5}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq6018_misc_fuse_volt_adj_param[] = { ++ {36, 54, 54}, ++ {}, ++}; ++ ++static struct cpr3_fuse_parameters ipq6018_fuse_params = { ++ .apss_ro_sel_param = ipq6018_apss_ro_sel_param, ++ .apss_init_voltage_param = ipq6018_apss_init_voltage_param, ++ .apss_target_quot_param = ipq6018_apss_target_quot_param, ++ .apss_quot_offset_param = ipq6018_apss_quot_offset_param, ++ .cpr_fusing_rev_param = ipq6018_cpr_fusing_rev_param, ++ .apss_speed_bin_param = ipq6018_apss_speed_bin_param, ++ .cpr_boost_fuse_cfg_param = ipq6018_cpr_boost_fuse_cfg_param, ++ .apss_boost_fuse_volt_param = ipq6018_apss_boost_fuse_volt_param, ++ .misc_fuse_volt_adj_param = ipq6018_misc_fuse_volt_adj_param ++}; ++ ++ ++/* ++ * Boost voltage fuse reference and ceiling voltages in microvolts for ++ * IPQ6018. ++ */ ++#define IPQ6018_APSS_BOOST_FUSE_REF_VOLT 1140000 ++#define IPQ6018_APSS_BOOST_CEILING_VOLT 1140000 ++#define IPQ6018_APSS_BOOST_FLOOR_VOLT 900000 ++ ++/* ++ * Open loop voltage fuse reference voltages in microvolts for IPQ807x ++ */ ++static int ipq6018_apss_fuse_ref_volt ++ [IPQ6018_APSS_FUSE_CORNERS] = { ++ 725000, ++ 862500, ++ 987500, ++ 1062500, ++}; ++ ++/* ++ * IPQ6018 Memory ACC settings on TCSR ++ * ++ * Turbo_L1: write TCSR_MEM_ACC_SW_OVERRIDE_LEGACY_APC0 0x10 ++ * write TCSR_CUSTOM_VDDAPC0_ACC_1 0x1 ++ * Other modes: write TCSR_MEM_ACC_SW_OVERRIDE_LEGACY_APC0 0x0 ++ * write TCSR_CUSTOM_VDDAPC0_ACC_1 0x0 ++ * ++ */ ++#define IPQ6018_APSS_MEM_ACC_TCSR_COUNT 2 ++#define TCSR_MEM_ACC_SW_OVERRIDE_LEGACY_APC0 0x1946178 ++#define TCSR_CUSTOM_VDDAPC0_ACC_1 0x1946124 ++ ++struct mem_acc_tcsr { ++ u32 phy_addr; ++ void __iomem *ioremap_addr; ++ u32 value; ++}; ++ ++static struct mem_acc_tcsr ipq6018_mem_acc_tcsr[IPQ6018_APSS_MEM_ACC_TCSR_COUNT] = { ++ {TCSR_MEM_ACC_SW_OVERRIDE_LEGACY_APC0, NULL, 0x10}, ++ {TCSR_CUSTOM_VDDAPC0_ACC_1, NULL, 0x1}, ++}; ++ ++/* ++ * IPQ9574 (Few parameters are changed, remaining are same as IPQ6018) ++ */ ++#define IPQ9574_APSS_FUSE_STEP_VOLT 10000 ++ ++static struct cpr3_fuse_param ++ipq9574_apss_ro_sel_param[IPQ9574_APSS_FUSE_CORNERS][2] = { ++ {{107, 4, 7}, {} }, ++ {{107, 0, 3}, {} }, ++ {{106, 4, 7}, {} }, ++ {{106, 0, 3}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq9574_apss_init_voltage_param[IPQ9574_APSS_FUSE_CORNERS][2] = { ++ {{104, 24, 29}, {} }, ++ {{104, 18, 23}, {} }, ++ {{104, 12, 17}, {} }, ++ {{104, 6, 11}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq9574_apss_target_quot_param[IPQ9574_APSS_FUSE_CORNERS][2] = { ++ {{106, 32, 43}, {} }, ++ {{106, 20, 31}, {} }, ++ {{106, 8, 19}, {} }, ++ {{106, 44, 55}, {} }, ++}; ++ ++static struct cpr3_fuse_param ++ipq9574_apss_quot_offset_param[IPQ9574_APSS_FUSE_CORNERS][2] = { ++ {{} }, ++ {{105, 48, 55}, {} }, ++ {{105, 40, 47}, {} }, ++ {{105, 32, 39}, {} }, ++}; ++ ++static struct cpr3_fuse_param ipq9574_cpr_fusing_rev_param[] = { ++ {107, 8, 10}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq9574_apss_speed_bin_param[] = { ++ {0, 40, 42}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq9574_cpr_boost_fuse_cfg_param[] = { ++ {0, 43, 45}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq9574_apss_boost_fuse_volt_param[] = { ++ {104, 0, 5}, ++ {}, ++}; ++ ++static struct cpr3_fuse_param ipq9574_misc_fuse_volt_adj_param[] = { ++ {0, 54, 54}, ++ {}, ++}; ++ ++static struct cpr3_fuse_parameters ipq9574_fuse_params = { ++ .apss_ro_sel_param = ipq9574_apss_ro_sel_param, ++ .apss_init_voltage_param = ipq9574_apss_init_voltage_param, ++ .apss_target_quot_param = ipq9574_apss_target_quot_param, ++ .apss_quot_offset_param = ipq9574_apss_quot_offset_param, ++ .cpr_fusing_rev_param = ipq9574_cpr_fusing_rev_param, ++ .apss_speed_bin_param = ipq9574_apss_speed_bin_param, ++ .cpr_boost_fuse_cfg_param = ipq9574_cpr_boost_fuse_cfg_param, ++ .apss_boost_fuse_volt_param = ipq9574_apss_boost_fuse_volt_param, ++ .misc_fuse_volt_adj_param = ipq9574_misc_fuse_volt_adj_param ++}; ++ ++/* ++ * Open loop voltage fuse reference voltages in microvolts for IPQ9574 ++ */ ++static int ipq9574_apss_fuse_ref_volt ++ [IPQ9574_APSS_FUSE_CORNERS] = { ++ 725000, ++ 862500, ++ 987500, ++ 1062500, ++}; ++ ++/** ++ * cpr4_ipq807x_apss_read_fuse_data() - load APSS specific fuse parameter values ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * This function allocates a cpr4_ipq807x_apss_fuses struct, fills it with ++ * values read out of hardware fuses, and finally copies common fuse values ++ * into the CPR3 regulator struct. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_ipq807x_apss_read_fuse_data(struct cpr3_regulator *vreg) ++{ ++ void __iomem *base = vreg->thread->ctrl->fuse_base; ++ struct cpr4_ipq807x_apss_fuses *fuse; ++ int i, rc; ++ ++ fuse = devm_kzalloc(vreg->thread->ctrl->dev, sizeof(*fuse), GFP_KERNEL); ++ if (!fuse) ++ return -ENOMEM; ++ ++ rc = cpr3_read_fuse_param(base, vreg->cpr4_regulator_data->cpr3_fuse_params->apss_speed_bin_param, ++ &fuse->speed_bin); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read speed bin fuse, rc=%d\n", rc); ++ return rc; ++ } ++ cpr3_info(vreg, "speed bin = %llu\n", fuse->speed_bin); ++ ++ rc = cpr3_read_fuse_param(base, vreg->cpr4_regulator_data->cpr3_fuse_params->cpr_fusing_rev_param, ++ &fuse->cpr_fusing_rev); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read CPR fusing revision fuse, rc=%d\n", ++ rc); ++ return rc; ++ } ++ cpr3_info(vreg, "CPR fusing revision = %llu\n", fuse->cpr_fusing_rev); ++ ++ rc = cpr3_read_fuse_param(base, vreg->cpr4_regulator_data->cpr3_fuse_params->misc_fuse_volt_adj_param, ++ &fuse->misc); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read misc voltage adjustment fuse, rc=%d\n", ++ rc); ++ return rc; ++ } ++ cpr3_info(vreg, "CPR misc fuse value = %llu\n", fuse->misc); ++ if (fuse->misc >= IPQ807x_MISC_FUSE_VAL_COUNT) { ++ cpr3_err(vreg, "CPR misc fuse value = %llu, should be < %lu\n", ++ fuse->misc, IPQ807x_MISC_FUSE_VAL_COUNT); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < g_valid_fuse_count; i++) { ++ rc = cpr3_read_fuse_param(base, ++ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_init_voltage_param[i], ++ &fuse->init_voltage[i]); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read fuse-corner %d initial voltage fuse, rc=%d\n", ++ i, rc); ++ return rc; ++ } ++ ++ rc = cpr3_read_fuse_param(base, ++ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_target_quot_param[i], ++ &fuse->target_quot[i]); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read fuse-corner %d target quotient fuse, rc=%d\n", ++ i, rc); ++ return rc; ++ } ++ ++ rc = cpr3_read_fuse_param(base, ++ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_ro_sel_param[i], ++ &fuse->ro_sel[i]); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read fuse-corner %d RO select fuse, rc=%d\n", ++ i, rc); ++ return rc; ++ } ++ ++ rc = cpr3_read_fuse_param(base, ++ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_quot_offset_param[i], ++ &fuse->quot_offset[i]); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read fuse-corner %d quotient offset fuse, rc=%d\n", ++ i, rc); ++ return rc; ++ } ++ } ++ ++ rc = cpr3_read_fuse_param(base, vreg->cpr4_regulator_data->cpr3_fuse_params->cpr_boost_fuse_cfg_param, ++ &fuse->boost_cfg); ++ if (rc) { ++ cpr3_err(vreg, "Unable to read CPR boost config fuse, rc=%d\n", ++ rc); ++ return rc; ++ } ++ cpr3_info(vreg, "Voltage boost fuse config = %llu boost = %s\n", ++ fuse->boost_cfg, boost_fuse[fuse->boost_cfg] ++ ? "enable" : "disable"); ++ ++ rc = cpr3_read_fuse_param(base, ++ vreg->cpr4_regulator_data->cpr3_fuse_params->apss_boost_fuse_volt_param, ++ &fuse->boost_voltage); ++ if (rc) { ++ cpr3_err(vreg, "failed to read boost fuse voltage, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ vreg->fuse_combo = fuse->cpr_fusing_rev + 8 * fuse->speed_bin; ++ if (vreg->fuse_combo >= CPR4_IPQ807x_APSS_FUSE_COMBO_COUNT) { ++ cpr3_err(vreg, "invalid CPR fuse combo = %d found\n", ++ vreg->fuse_combo); ++ return -EINVAL; ++ } ++ ++ vreg->speed_bin_fuse = fuse->speed_bin; ++ vreg->cpr_rev_fuse = fuse->cpr_fusing_rev; ++ vreg->fuse_corner_count = g_valid_fuse_count; ++ vreg->platform_fuses = fuse; ++ ++ return 0; ++} ++ ++/** ++ * cpr4_apss_parse_corner_data() - parse APSS corner data from device tree ++ * properties of the CPR3 regulator's device node ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_parse_corner_data(struct cpr3_regulator *vreg) ++{ ++ struct device_node *node = vreg->of_node; ++ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses; ++ u32 *temp = NULL; ++ int i, rc; ++ ++ rc = cpr3_parse_common_corner_data(vreg); ++ if (rc) { ++ cpr3_err(vreg, "error reading corner data, rc=%d\n", rc); ++ return rc; ++ } ++ ++ /* If fuse has incorrect RO Select values and dtsi has "qcom,cpr-ro-sel" ++ * entry with RO select values other than zero, then dtsi values will ++ * be used. ++ */ ++ if (of_find_property(node, "qcom,cpr-ro-sel", NULL)) { ++ temp = kcalloc(vreg->fuse_corner_count, sizeof(*temp), ++ GFP_KERNEL); ++ if (!temp) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_array_property(vreg, "qcom,cpr-ro-sel", ++ vreg->fuse_corner_count, temp); ++ if (rc) ++ goto done; ++ ++ for (i = 0; i < vreg->fuse_corner_count; i++) { ++ if (temp[i] != 0) ++ fuse->ro_sel[i] = temp[i]; ++ } ++ } ++done: ++ kfree(temp); ++ return rc; ++} ++ ++/** ++ * cpr4_apss_parse_misc_fuse_voltage_adjustments() - fill an array from a ++ * portion of the voltage adjustments specified based on ++ * miscellaneous fuse bits. ++ * @vreg: Pointer to the CPR3 regulator ++ * @volt_adjust: Voltage adjustment output data array which must be ++ * of size vreg->corner_count ++ * ++ * cpr3_parse_common_corner_data() must be called for vreg before this function ++ * is called so that speed bin size elements are initialized. ++ * ++ * Two formats are supported for the device tree property: ++ * 1. Length == tuple_list_size * vreg->corner_count ++ * (reading begins at index 0) ++ * 2. Length == tuple_list_size * vreg->speed_bin_corner_sum ++ * (reading begins at index tuple_list_size * vreg->speed_bin_offset) ++ * ++ * Here, tuple_list_size is the number of possible values for misc fuse. ++ * All other property lengths are treated as errors. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_parse_misc_fuse_voltage_adjustments( ++ struct cpr3_regulator *vreg, u32 *volt_adjust) ++{ ++ struct device_node *node = vreg->of_node; ++ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses; ++ int tuple_list_size = IPQ807x_MISC_FUSE_VAL_COUNT; ++ int i, offset, rc, len = 0; ++ const char *prop_name = "qcom,cpr-misc-fuse-voltage-adjustment"; ++ ++ if (!of_find_property(node, prop_name, &len)) { ++ cpr3_err(vreg, "property %s is missing\n", prop_name); ++ return -EINVAL; ++ } ++ ++ if (len == tuple_list_size * vreg->corner_count * sizeof(u32)) { ++ offset = 0; ++ } else if (vreg->speed_bin_corner_sum > 0 && ++ len == tuple_list_size * vreg->speed_bin_corner_sum ++ * sizeof(u32)) { ++ offset = tuple_list_size * vreg->speed_bin_offset ++ + fuse->misc * vreg->corner_count; ++ } else { ++ if (vreg->speed_bin_corner_sum > 0) ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu or %zu\n", ++ prop_name, len, ++ tuple_list_size * vreg->corner_count ++ * sizeof(u32), ++ tuple_list_size * vreg->speed_bin_corner_sum ++ * sizeof(u32)); ++ else ++ cpr3_err(vreg, "property %s has invalid length=%d, should be %zu\n", ++ prop_name, len, ++ tuple_list_size * vreg->corner_count ++ * sizeof(u32)); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ rc = of_property_read_u32_index(node, prop_name, offset + i, ++ &volt_adjust[i]); ++ if (rc) { ++ cpr3_err(vreg, "error reading property %s, rc=%d\n", ++ prop_name, rc); ++ return rc; ++ } ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr4_ipq807x_apss_calculate_open_loop_voltages() - calculate the open-loop ++ * voltage for each corner of a CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * If open-loop voltage interpolation is allowed in device tree, then ++ * this function calculates the open-loop voltage for a given corner using ++ * linear interpolation. This interpolation is performed using the processor ++ * frequencies of the lower and higher Fmax corners along with their fused ++ * open-loop voltages. ++ * ++ * If open-loop voltage interpolation is not allowed, then this function uses ++ * the Fmax fused open-loop voltage for all of the corners associated with a ++ * given fuse corner. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_ipq807x_apss_calculate_open_loop_voltages( ++ struct cpr3_regulator *vreg) ++{ ++ struct device_node *node = vreg->of_node; ++ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses; ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ int i, j, rc = 0; ++ bool allow_interpolation; ++ u64 freq_low, volt_low, freq_high, volt_high; ++ int *fuse_volt, *misc_adj_volt; ++ int *fmax_corner; ++ ++ fuse_volt = kcalloc(vreg->fuse_corner_count, sizeof(*fuse_volt), ++ GFP_KERNEL); ++ fmax_corner = kcalloc(vreg->fuse_corner_count, sizeof(*fmax_corner), ++ GFP_KERNEL); ++ if (!fuse_volt || !fmax_corner) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->fuse_corner_count; i++) { ++ if (ctrl->cpr_global_setting == CPR_DISABLED) ++ fuse_volt[i] = vreg->cpr4_regulator_data->fuse_ref_volt[i]; ++ else ++ fuse_volt[i] = cpr3_convert_open_loop_voltage_fuse( ++ vreg->cpr4_regulator_data->fuse_ref_volt[i], ++ vreg->cpr4_regulator_data->fuse_step_volt, ++ fuse->init_voltage[i], ++ IPQ807x_APSS_VOLTAGE_FUSE_SIZE); ++ ++ /* Log fused open-loop voltage values for debugging purposes. */ ++ cpr3_info(vreg, "fused %8s: open-loop=%7d uV\n", ++ cpr4_ipq807x_apss_fuse_corner_name[i], ++ fuse_volt[i]); ++ } ++ ++ rc = cpr3_determine_part_type(vreg, ++ fuse_volt[vreg->fuse_corner_count - 1]); ++ if (rc) { ++ cpr3_err(vreg, "fused part type detection failed failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ rc = cpr3_adjust_fused_open_loop_voltages(vreg, fuse_volt); ++ if (rc) { ++ cpr3_err(vreg, "fused open-loop voltage adjustment failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ allow_interpolation = of_property_read_bool(node, ++ "qcom,allow-voltage-interpolation"); ++ ++ for (i = 1; i < vreg->fuse_corner_count; i++) { ++ if (fuse_volt[i] < fuse_volt[i - 1]) { ++ cpr3_info(vreg, "fuse corner %d voltage=%d uV < fuse corner %d voltage=%d uV; overriding: fuse corner %d voltage=%d\n", ++ i, fuse_volt[i], i - 1, fuse_volt[i - 1], ++ i, fuse_volt[i - 1]); ++ fuse_volt[i] = fuse_volt[i - 1]; ++ } ++ } ++ ++ if (!allow_interpolation) { ++ /* Use fused open-loop voltage for lower frequencies. */ ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].open_loop_volt ++ = fuse_volt[vreg->corner[i].cpr_fuse_corner]; ++ goto done; ++ } ++ ++ /* Determine highest corner mapped to each fuse corner */ ++ j = vreg->fuse_corner_count - 1; ++ for (i = vreg->corner_count - 1; i >= 0; i--) { ++ if (vreg->corner[i].cpr_fuse_corner == j) { ++ fmax_corner[j] = i; ++ j--; ++ } ++ } ++ if (j >= 0) { ++ cpr3_err(vreg, "invalid fuse corner mapping\n"); ++ rc = -EINVAL; ++ goto done; ++ } ++ ++ /* ++ * Interpolation is not possible for corners mapped to the lowest fuse ++ * corner so use the fuse corner value directly. ++ */ ++ for (i = 0; i <= fmax_corner[0]; i++) ++ vreg->corner[i].open_loop_volt = fuse_volt[0]; ++ ++ /* Interpolate voltages for the higher fuse corners. */ ++ for (i = 1; i < vreg->fuse_corner_count; i++) { ++ freq_low = vreg->corner[fmax_corner[i - 1]].proc_freq; ++ volt_low = fuse_volt[i - 1]; ++ freq_high = vreg->corner[fmax_corner[i]].proc_freq; ++ volt_high = fuse_volt[i]; ++ ++ for (j = fmax_corner[i - 1] + 1; j <= fmax_corner[i]; j++) ++ vreg->corner[j].open_loop_volt = cpr3_interpolate( ++ freq_low, volt_low, freq_high, volt_high, ++ vreg->corner[j].proc_freq); ++ } ++ ++done: ++ if (rc == 0) { ++ cpr3_debug(vreg, "unadjusted per-corner open-loop voltages:\n"); ++ for (i = 0; i < vreg->corner_count; i++) ++ cpr3_debug(vreg, "open-loop[%2d] = %d uV\n", i, ++ vreg->corner[i].open_loop_volt); ++ ++ rc = cpr3_adjust_open_loop_voltages(vreg); ++ if (rc) ++ cpr3_err(vreg, "open-loop voltage adjustment failed, rc=%d\n", ++ rc); ++ ++ if (of_find_property(node, ++ "qcom,cpr-misc-fuse-voltage-adjustment", ++ NULL)) { ++ misc_adj_volt = kcalloc(vreg->corner_count, ++ sizeof(*misc_adj_volt), GFP_KERNEL); ++ if (!misc_adj_volt) { ++ rc = -ENOMEM; ++ goto _exit; ++ } ++ ++ rc = cpr4_apss_parse_misc_fuse_voltage_adjustments(vreg, ++ misc_adj_volt); ++ if (rc) { ++ cpr3_err(vreg, "qcom,cpr-misc-fuse-voltage-adjustment reading failed, rc=%d\n", ++ rc); ++ kfree(misc_adj_volt); ++ goto _exit; ++ } ++ ++ for (i = 0; i < vreg->corner_count; i++) ++ vreg->corner[i].open_loop_volt ++ += misc_adj_volt[i]; ++ kfree(misc_adj_volt); ++ } ++ } ++ ++_exit: ++ kfree(fuse_volt); ++ kfree(fmax_corner); ++ return rc; ++} ++ ++/** ++ * cpr4_ipq807x_apss_set_no_interpolation_quotients() - use the fused target ++ * quotient values for lower frequencies. ++ * @vreg: Pointer to the CPR3 regulator ++ * @volt_adjust: Pointer to array of per-corner closed-loop adjustment ++ * voltages ++ * @volt_adjust_fuse: Pointer to array of per-fuse-corner closed-loop ++ * adjustment voltages ++ * @ro_scale: Pointer to array of per-fuse-corner RO scaling factor ++ * values with units of QUOT/V ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_ipq807x_apss_set_no_interpolation_quotients( ++ struct cpr3_regulator *vreg, int *volt_adjust, ++ int *volt_adjust_fuse, int *ro_scale) ++{ ++ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses; ++ u32 quot, ro; ++ int quot_adjust; ++ int i, fuse_corner; ++ ++ for (i = 0; i < vreg->corner_count; i++) { ++ fuse_corner = vreg->corner[i].cpr_fuse_corner; ++ quot = fuse->target_quot[fuse_corner]; ++ quot_adjust = cpr3_quot_adjustment(ro_scale[fuse_corner], ++ volt_adjust_fuse[fuse_corner] + ++ volt_adjust[i]); ++ ro = fuse->ro_sel[fuse_corner]; ++ vreg->corner[i].target_quot[ro] = quot + quot_adjust; ++ cpr3_debug(vreg, "corner=%d RO=%u target quot=%u\n", ++ i, ro, quot); ++ ++ if (quot_adjust) ++ cpr3_debug(vreg, "adjusted corner %d RO%u target quot: %u --> %u (%d uV)\n", ++ i, ro, quot, vreg->corner[i].target_quot[ro], ++ volt_adjust_fuse[fuse_corner] + ++ volt_adjust[i]); ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr4_ipq807x_apss_calculate_target_quotients() - calculate the CPR target ++ * quotient for each corner of a CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * If target quotient interpolation is allowed in device tree, then this ++ * function calculates the target quotient for a given corner using linear ++ * interpolation. This interpolation is performed using the processor ++ * frequencies of the lower and higher Fmax corners along with the fused ++ * target quotient and quotient offset of the higher Fmax corner. ++ * ++ * If target quotient interpolation is not allowed, then this function uses ++ * the Fmax fused target quotient for all of the corners associated with a ++ * given fuse corner. ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_ipq807x_apss_calculate_target_quotients( ++ struct cpr3_regulator *vreg) ++{ ++ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses; ++ int rc; ++ bool allow_interpolation; ++ u64 freq_low, freq_high, prev_quot; ++ u64 *quot_low; ++ u64 *quot_high; ++ u32 quot, ro; ++ int i, j, fuse_corner, quot_adjust; ++ int *fmax_corner; ++ int *volt_adjust, *volt_adjust_fuse, *ro_scale; ++ int *voltage_adj_misc; ++ ++ /* Log fused quotient values for debugging purposes. */ ++ for (i = CPR4_IPQ807x_APSS_FUSE_CORNER_SVS; ++ i < vreg->fuse_corner_count; i++) ++ cpr3_info(vreg, "fused %8s: quot[%2llu]=%4llu, quot_offset[%2llu]=%4llu\n", ++ cpr4_ipq807x_apss_fuse_corner_name[i], ++ fuse->ro_sel[i], fuse->target_quot[i], ++ fuse->ro_sel[i], fuse->quot_offset[i] * ++ IPQ807x_APSS_QUOT_OFFSET_SCALE); ++ ++ allow_interpolation = of_property_read_bool(vreg->of_node, ++ "qcom,allow-quotient-interpolation"); ++ ++ volt_adjust = kcalloc(vreg->corner_count, sizeof(*volt_adjust), ++ GFP_KERNEL); ++ volt_adjust_fuse = kcalloc(vreg->fuse_corner_count, ++ sizeof(*volt_adjust_fuse), GFP_KERNEL); ++ ro_scale = kcalloc(vreg->fuse_corner_count, sizeof(*ro_scale), ++ GFP_KERNEL); ++ fmax_corner = kcalloc(vreg->fuse_corner_count, sizeof(*fmax_corner), ++ GFP_KERNEL); ++ quot_low = kcalloc(vreg->fuse_corner_count, sizeof(*quot_low), ++ GFP_KERNEL); ++ quot_high = kcalloc(vreg->fuse_corner_count, sizeof(*quot_high), ++ GFP_KERNEL); ++ if (!volt_adjust || !volt_adjust_fuse || !ro_scale || ++ !fmax_corner || !quot_low || !quot_high) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ rc = cpr3_parse_closed_loop_voltage_adjustments(vreg, &fuse->ro_sel[0], ++ volt_adjust, volt_adjust_fuse, ro_scale); ++ if (rc) { ++ cpr3_err(vreg, "could not load closed-loop voltage adjustments, rc=%d\n", ++ rc); ++ goto done; ++ } ++ ++ if (of_find_property(vreg->of_node, ++ "qcom,cpr-misc-fuse-voltage-adjustment", NULL)) { ++ voltage_adj_misc = kcalloc(vreg->corner_count, ++ sizeof(*voltage_adj_misc), GFP_KERNEL); ++ if (!voltage_adj_misc) { ++ rc = -ENOMEM; ++ goto done; ++ } ++ ++ rc = cpr4_apss_parse_misc_fuse_voltage_adjustments(vreg, ++ voltage_adj_misc); ++ if (rc) { ++ cpr3_err(vreg, "qcom,cpr-misc-fuse-voltage-adjustment reading failed, rc=%d\n", ++ rc); ++ kfree(voltage_adj_misc); ++ goto done; ++ } ++ ++ for (i = 0; i < vreg->corner_count; i++) ++ volt_adjust[i] += voltage_adj_misc[i]; ++ ++ kfree(voltage_adj_misc); ++ } ++ ++ if (!allow_interpolation) { ++ /* Use fused target quotients for lower frequencies. */ ++ return cpr4_ipq807x_apss_set_no_interpolation_quotients( ++ vreg, volt_adjust, volt_adjust_fuse, ro_scale); ++ } ++ ++ /* Determine highest corner mapped to each fuse corner */ ++ j = vreg->fuse_corner_count - 1; ++ for (i = vreg->corner_count - 1; i >= 0; i--) { ++ if (vreg->corner[i].cpr_fuse_corner == j) { ++ fmax_corner[j] = i; ++ j--; ++ } ++ } ++ if (j >= 0) { ++ cpr3_err(vreg, "invalid fuse corner mapping\n"); ++ rc = -EINVAL; ++ goto done; ++ } ++ ++ /* ++ * Interpolation is not possible for corners mapped to the lowest fuse ++ * corner so use the fuse corner value directly. ++ */ ++ i = CPR4_IPQ807x_APSS_FUSE_CORNER_SVS; ++ quot_adjust = cpr3_quot_adjustment(ro_scale[i], volt_adjust_fuse[i]); ++ quot = fuse->target_quot[i] + quot_adjust; ++ quot_high[i] = quot_low[i] = quot; ++ ro = fuse->ro_sel[i]; ++ if (quot_adjust) ++ cpr3_debug(vreg, "adjusted fuse corner %d RO%u target quot: %llu --> %u (%d uV)\n", ++ i, ro, fuse->target_quot[i], quot, volt_adjust_fuse[i]); ++ ++ for (i = 0; i <= fmax_corner[CPR4_IPQ807x_APSS_FUSE_CORNER_SVS]; ++ i++) ++ vreg->corner[i].target_quot[ro] = quot; ++ ++ for (i = CPR4_IPQ807x_APSS_FUSE_CORNER_NOM; ++ i < vreg->fuse_corner_count; i++) { ++ quot_high[i] = fuse->target_quot[i]; ++ if (fuse->ro_sel[i] == fuse->ro_sel[i - 1]) ++ quot_low[i] = quot_high[i - 1]; ++ else ++ quot_low[i] = quot_high[i] ++ - fuse->quot_offset[i] ++ * IPQ807x_APSS_QUOT_OFFSET_SCALE; ++ if (quot_high[i] < quot_low[i]) { ++ cpr3_debug(vreg, "quot_high[%d]=%llu < quot_low[%d]=%llu; overriding: quot_high[%d]=%llu\n", ++ i, quot_high[i], i, quot_low[i], ++ i, quot_low[i]); ++ quot_high[i] = quot_low[i]; ++ } ++ } ++ ++ /* Perform per-fuse-corner target quotient adjustment */ ++ for (i = 1; i < vreg->fuse_corner_count; i++) { ++ quot_adjust = cpr3_quot_adjustment(ro_scale[i], ++ volt_adjust_fuse[i]); ++ if (quot_adjust) { ++ prev_quot = quot_high[i]; ++ quot_high[i] += quot_adjust; ++ cpr3_debug(vreg, "adjusted fuse corner %d RO%llu target quot: %llu --> %llu (%d uV)\n", ++ i, fuse->ro_sel[i], prev_quot, quot_high[i], ++ volt_adjust_fuse[i]); ++ } ++ ++ if (fuse->ro_sel[i] == fuse->ro_sel[i - 1]) ++ quot_low[i] = quot_high[i - 1]; ++ else ++ quot_low[i] += cpr3_quot_adjustment(ro_scale[i], ++ volt_adjust_fuse[i - 1]); ++ ++ if (quot_high[i] < quot_low[i]) { ++ cpr3_debug(vreg, "quot_high[%d]=%llu < quot_low[%d]=%llu after adjustment; overriding: quot_high[%d]=%llu\n", ++ i, quot_high[i], i, quot_low[i], ++ i, quot_low[i]); ++ quot_high[i] = quot_low[i]; ++ } ++ } ++ ++ /* Interpolate voltages for the higher fuse corners. */ ++ for (i = 1; i < vreg->fuse_corner_count; i++) { ++ freq_low = vreg->corner[fmax_corner[i - 1]].proc_freq; ++ freq_high = vreg->corner[fmax_corner[i]].proc_freq; ++ ++ ro = fuse->ro_sel[i]; ++ for (j = fmax_corner[i - 1] + 1; j <= fmax_corner[i]; j++) ++ vreg->corner[j].target_quot[ro] = cpr3_interpolate( ++ freq_low, quot_low[i], freq_high, quot_high[i], ++ vreg->corner[j].proc_freq); ++ } ++ ++ /* Perform per-corner target quotient adjustment */ ++ for (i = 0; i < vreg->corner_count; i++) { ++ fuse_corner = vreg->corner[i].cpr_fuse_corner; ++ ro = fuse->ro_sel[fuse_corner]; ++ quot_adjust = cpr3_quot_adjustment(ro_scale[fuse_corner], ++ volt_adjust[i]); ++ if (quot_adjust) { ++ prev_quot = vreg->corner[i].target_quot[ro]; ++ vreg->corner[i].target_quot[ro] += quot_adjust; ++ cpr3_debug(vreg, "adjusted corner %d RO%u target quot: %llu --> %u (%d uV)\n", ++ i, ro, prev_quot, ++ vreg->corner[i].target_quot[ro], ++ volt_adjust[i]); ++ } ++ } ++ ++ /* Ensure that target quotients increase monotonically */ ++ for (i = 1; i < vreg->corner_count; i++) { ++ ro = fuse->ro_sel[vreg->corner[i].cpr_fuse_corner]; ++ if (fuse->ro_sel[vreg->corner[i - 1].cpr_fuse_corner] == ro ++ && vreg->corner[i].target_quot[ro] ++ < vreg->corner[i - 1].target_quot[ro]) { ++ cpr3_debug(vreg, "adjusted corner %d RO%u target quot=%u < adjusted corner %d RO%u target quot=%u; overriding: corner %d RO%u target quot=%u\n", ++ i, ro, vreg->corner[i].target_quot[ro], ++ i - 1, ro, vreg->corner[i - 1].target_quot[ro], ++ i, ro, vreg->corner[i - 1].target_quot[ro]); ++ vreg->corner[i].target_quot[ro] ++ = vreg->corner[i - 1].target_quot[ro]; ++ } ++ } ++ ++done: ++ kfree(volt_adjust); ++ kfree(volt_adjust_fuse); ++ kfree(ro_scale); ++ kfree(fmax_corner); ++ kfree(quot_low); ++ kfree(quot_high); ++ return rc; ++} ++ ++/** ++ * cpr4_apss_print_settings() - print out APSS CPR configuration settings into ++ * the kernel log for debugging purposes ++ * @vreg: Pointer to the CPR3 regulator ++ */ ++static void cpr4_apss_print_settings(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_corner *corner; ++ int i; ++ ++ cpr3_debug(vreg, "Corner: Frequency (Hz), Fuse Corner, Floor (uV), Open-Loop (uV), Ceiling (uV)\n"); ++ for (i = 0; i < vreg->corner_count; i++) { ++ corner = &vreg->corner[i]; ++ cpr3_debug(vreg, "%3d: %10u, %2d, %7d, %7d, %7d\n", ++ i, corner->proc_freq, corner->cpr_fuse_corner, ++ corner->floor_volt, corner->open_loop_volt, ++ corner->ceiling_volt); ++ } ++ ++ if (vreg->thread->ctrl->apm) ++ cpr3_debug(vreg, "APM threshold = %d uV, APM adjust = %d uV\n", ++ vreg->thread->ctrl->apm_threshold_volt, ++ vreg->thread->ctrl->apm_adj_volt); ++} ++ ++/** ++ * cpr4_apss_init_thread() - perform steps necessary to initialize the ++ * configuration data for a CPR3 thread ++ * @thread: Pointer to the CPR3 thread ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_init_thread(struct cpr3_thread *thread) ++{ ++ int rc; ++ ++ rc = cpr3_parse_common_thread_data(thread); ++ if (rc) { ++ cpr3_err(thread->ctrl, "thread %u unable to read CPR thread data from device tree, rc=%d\n", ++ thread->thread_id, rc); ++ return rc; ++ } ++ ++ return 0; ++} ++ ++/** ++ * cpr4_apss_parse_temp_adj_properties() - parse temperature based ++ * adjustment properties from device tree. ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_parse_temp_adj_properties(struct cpr3_controller *ctrl) ++{ ++ struct device_node *of_node = ctrl->dev->of_node; ++ int rc, i, len, temp_point_count; ++ ++ if (!of_find_property(of_node, "qcom,cpr-temp-point-map", &len)) { ++ /* ++ * Temperature based adjustments are not defined. Single ++ * temperature band is still valid for per-online-core ++ * adjustments. ++ */ ++ ctrl->temp_band_count = 1; ++ return 0; ++ } ++ ++ temp_point_count = len / sizeof(u32); ++ if (temp_point_count <= 0 || ++ temp_point_count > IPQ807x_APSS_MAX_TEMP_POINTS) { ++ cpr3_err(ctrl, "invalid number of temperature points %d > %d (max)\n", ++ temp_point_count, IPQ807x_APSS_MAX_TEMP_POINTS); ++ return -EINVAL; ++ } ++ ++ ctrl->temp_points = devm_kcalloc(ctrl->dev, temp_point_count, ++ sizeof(*ctrl->temp_points), GFP_KERNEL); ++ if (!ctrl->temp_points) ++ return -ENOMEM; ++ ++ rc = of_property_read_u32_array(of_node, "qcom,cpr-temp-point-map", ++ ctrl->temp_points, temp_point_count); ++ if (rc) { ++ cpr3_err(ctrl, "error reading property qcom,cpr-temp-point-map, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ for (i = 0; i < temp_point_count; i++) ++ cpr3_debug(ctrl, "Temperature Point %d=%d\n", i, ++ ctrl->temp_points[i]); ++ ++ /* ++ * If t1, t2, and t3 are the temperature points, then the temperature ++ * bands are: (-inf, t1], (t1, t2], (t2, t3], and (t3, inf). ++ */ ++ ctrl->temp_band_count = temp_point_count + 1; ++ cpr3_debug(ctrl, "Number of temp bands =%d\n", ctrl->temp_band_count); ++ ++ rc = of_property_read_u32(of_node, "qcom,cpr-initial-temp-band", ++ &ctrl->initial_temp_band); ++ if (rc) { ++ cpr3_err(ctrl, "error reading qcom,cpr-initial-temp-band, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (ctrl->initial_temp_band >= ctrl->temp_band_count) { ++ cpr3_err(ctrl, "Initial temperature band value %d should be in range [0 - %d]\n", ++ ctrl->initial_temp_band, ctrl->temp_band_count - 1); ++ return -EINVAL; ++ } ++ ++ ctrl->temp_sensor_id_start = IPQ807x_APSS_TEMP_SENSOR_ID_START; ++ ctrl->temp_sensor_id_end = IPQ807x_APSS_TEMP_SENSOR_ID_END; ++ ctrl->allow_temp_adj = true; ++ return rc; ++} ++ ++/** ++ * cpr4_apss_parse_boost_properties() - parse configuration data for boost ++ * voltage adjustment for CPR3 regulator from device tree. ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_parse_boost_properties(struct cpr3_regulator *vreg) ++{ ++ struct cpr3_controller *ctrl = vreg->thread->ctrl; ++ struct cpr4_ipq807x_apss_fuses *fuse = vreg->platform_fuses; ++ struct cpr3_corner *corner; ++ int i, boost_voltage, final_boost_volt, rc = 0; ++ int *boost_table = NULL, *boost_temp_adj = NULL; ++ int boost_voltage_adjust = 0, boost_num_cores = 0; ++ u32 boost_allowed = 0; ++ ++ if (!boost_fuse[fuse->boost_cfg]) ++ /* Voltage boost is disabled in fuse */ ++ return 0; ++ ++ if (of_find_property(vreg->of_node, "qcom,allow-boost", NULL)) { ++ rc = cpr3_parse_array_property(vreg, "qcom,allow-boost", 1, ++ &boost_allowed); ++ if (rc) ++ return rc; ++ } ++ ++ if (!boost_allowed) { ++ /* Voltage boost is not enabled for this regulator */ ++ return 0; ++ } ++ ++ boost_voltage = cpr3_convert_open_loop_voltage_fuse( ++ vreg->cpr4_regulator_data->boost_fuse_ref_volt, ++ vreg->cpr4_regulator_data->fuse_step_volt, ++ fuse->boost_voltage, ++ IPQ807x_APSS_VOLTAGE_FUSE_SIZE); ++ ++ /* Log boost voltage value for debugging purposes. */ ++ cpr3_info(vreg, "Boost open-loop=%7d uV\n", boost_voltage); ++ ++ if (of_find_property(vreg->of_node, ++ "qcom,cpr-boost-voltage-fuse-adjustment", NULL)) { ++ rc = cpr3_parse_array_property(vreg, ++ "qcom,cpr-boost-voltage-fuse-adjustment", ++ 1, &boost_voltage_adjust); ++ if (rc) { ++ cpr3_err(vreg, "qcom,cpr-boost-voltage-fuse-adjustment reading failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ boost_voltage += boost_voltage_adjust; ++ /* Log boost voltage value for debugging purposes. */ ++ cpr3_info(vreg, "Adjusted boost open-loop=%7d uV\n", ++ boost_voltage); ++ } ++ ++ /* Limit boost voltage value between ceiling and floor voltage limits */ ++ boost_voltage = min(boost_voltage, vreg->cpr4_regulator_data->boost_ceiling_volt); ++ boost_voltage = max(boost_voltage, vreg->cpr4_regulator_data->boost_floor_volt); ++ ++ /* ++ * The boost feature can only be used for the highest voltage corner. ++ * Also, keep core-count adjustments disabled when the boost feature ++ * is enabled. ++ */ ++ corner = &vreg->corner[vreg->corner_count - 1]; ++ if (!corner->sdelta) { ++ /* ++ * If core-count/temp adjustments are not defined, the cpr4 ++ * sdelta for this corner will not be allocated. Allocate it ++ * here for boost configuration. ++ */ ++ corner->sdelta = devm_kzalloc(ctrl->dev, ++ sizeof(*corner->sdelta), GFP_KERNEL); ++ if (!corner->sdelta) ++ return -ENOMEM; ++ } ++ corner->sdelta->temp_band_count = ctrl->temp_band_count; ++ ++ rc = of_property_read_u32(vreg->of_node, "qcom,cpr-num-boost-cores", ++ &boost_num_cores); ++ if (rc) { ++ cpr3_err(vreg, "qcom,cpr-num-boost-cores reading failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (boost_num_cores <= 0 || ++ boost_num_cores > IPQ807x_APSS_CPR_SDELTA_CORE_COUNT) { ++ cpr3_err(vreg, "Invalid boost number of cores = %d\n", ++ boost_num_cores); ++ return -EINVAL; ++ } ++ corner->sdelta->boost_num_cores = boost_num_cores; ++ ++ boost_table = devm_kcalloc(ctrl->dev, corner->sdelta->temp_band_count, ++ sizeof(*boost_table), GFP_KERNEL); ++ if (!boost_table) ++ return -ENOMEM; ++ ++ if (of_find_property(vreg->of_node, ++ "qcom,cpr-boost-temp-adjustment", NULL)) { ++ boost_temp_adj = kcalloc(corner->sdelta->temp_band_count, ++ sizeof(*boost_temp_adj), GFP_KERNEL); ++ if (!boost_temp_adj) ++ return -ENOMEM; ++ ++ rc = cpr3_parse_array_property(vreg, ++ "qcom,cpr-boost-temp-adjustment", ++ corner->sdelta->temp_band_count, ++ boost_temp_adj); ++ if (rc) { ++ cpr3_err(vreg, "qcom,cpr-boost-temp-adjustment reading failed, rc=%d\n", ++ rc); ++ goto done; ++ } ++ } ++ ++ for (i = 0; i < corner->sdelta->temp_band_count; i++) { ++ /* Apply static adjustments to boost voltage */ ++ final_boost_volt = boost_voltage + (boost_temp_adj == NULL ++ ? 0 : boost_temp_adj[i]); ++ /* ++ * Limit final adjusted boost voltage value between ceiling ++ * and floor voltage limits ++ */ ++ final_boost_volt = min(final_boost_volt, ++ vreg->cpr4_regulator_data->boost_ceiling_volt); ++ final_boost_volt = max(final_boost_volt, ++ vreg->cpr4_regulator_data->boost_floor_volt); ++ ++ boost_table[i] = (corner->open_loop_volt - final_boost_volt) ++ / ctrl->step_volt; ++ cpr3_debug(vreg, "Adjusted boost voltage margin for temp band %d = %d steps\n", ++ i, boost_table[i]); ++ } ++ ++ corner->ceiling_volt = vreg->cpr4_regulator_data->boost_ceiling_volt; ++ corner->sdelta->boost_table = boost_table; ++ corner->sdelta->allow_boost = true; ++ corner->sdelta->allow_core_count_adj = false; ++ vreg->allow_boost = true; ++ ctrl->allow_boost = true; ++done: ++ kfree(boost_temp_adj); ++ return rc; ++} ++ ++/** ++ * cpr4_apss_init_regulator() - perform all steps necessary to initialize the ++ * configuration data for a CPR3 regulator ++ * @vreg: Pointer to the CPR3 regulator ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_init_regulator(struct cpr3_regulator *vreg) ++{ ++ struct cpr4_ipq807x_apss_fuses *fuse; ++ int rc; ++ ++ rc = cpr4_ipq807x_apss_read_fuse_data(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to read CPR fuse data, rc=%d\n", rc); ++ return rc; ++ } ++ ++ fuse = vreg->platform_fuses; ++ ++ rc = cpr4_apss_parse_corner_data(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to read CPR corner data from device tree, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr3_mem_acc_init(vreg); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(vreg, "unable to initialize mem-acc regulator settings, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr4_ipq807x_apss_calculate_open_loop_voltages(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to calculate open-loop voltages, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr3_limit_open_loop_voltages(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to limit open-loop voltages, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ cpr3_open_loop_voltage_as_ceiling(vreg); ++ ++ rc = cpr3_limit_floor_voltages(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to limit floor voltages, rc=%d\n", rc); ++ return rc; ++ } ++ ++ rc = cpr4_ipq807x_apss_calculate_target_quotients(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to calculate target quotients, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr4_parse_core_count_temp_voltage_adj(vreg, false); ++ if (rc) { ++ cpr3_err(vreg, "unable to parse temperature and core count voltage adjustments, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (vreg->allow_core_count_adj && (vreg->max_core_count <= 0 ++ || vreg->max_core_count > ++ IPQ807x_APSS_CPR_SDELTA_CORE_COUNT)) { ++ cpr3_err(vreg, "qcom,max-core-count has invalid value = %d\n", ++ vreg->max_core_count); ++ return -EINVAL; ++ } ++ ++ rc = cpr4_apss_parse_boost_properties(vreg); ++ if (rc) { ++ cpr3_err(vreg, "unable to parse boost adjustments, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ cpr4_apss_print_settings(vreg); ++ ++ return rc; ++} ++ ++/** ++ * cpr4_apss_init_controller() - perform APSS CPR4 controller specific ++ * initializations ++ * @ctrl: Pointer to the CPR3 controller ++ * ++ * Return: 0 on success, errno on failure ++ */ ++static int cpr4_apss_init_controller(struct cpr3_controller *ctrl) ++{ ++ int rc; ++ ++ rc = cpr3_parse_common_ctrl_data(ctrl); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable to parse common controller data, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = of_property_read_u32(ctrl->dev->of_node, ++ "qcom,cpr-down-error-step-limit", ++ &ctrl->down_error_step_limit); ++ if (rc) { ++ cpr3_err(ctrl, "error reading qcom,cpr-down-error-step-limit, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = of_property_read_u32(ctrl->dev->of_node, ++ "qcom,cpr-up-error-step-limit", ++ &ctrl->up_error_step_limit); ++ if (rc) { ++ cpr3_err(ctrl, "error reading qcom,cpr-up-error-step-limit, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ /* ++ * Use fixed step quotient if specified otherwise use dynamic ++ * calculated per RO step quotient ++ */ ++ of_property_read_u32(ctrl->dev->of_node, "qcom,cpr-step-quot-fixed", ++ &ctrl->step_quot_fixed); ++ ctrl->use_dynamic_step_quot = ctrl->step_quot_fixed ? false : true; ++ ++ ctrl->saw_use_unit_mV = of_property_read_bool(ctrl->dev->of_node, ++ "qcom,cpr-saw-use-unit-mV"); ++ ++ of_property_read_u32(ctrl->dev->of_node, ++ "qcom,cpr-voltage-settling-time", ++ &ctrl->voltage_settling_time); ++ ++ if (of_find_property(ctrl->dev->of_node, "vdd-limit-supply", NULL)) { ++ ctrl->vdd_limit_regulator = ++ devm_regulator_get(ctrl->dev, "vdd-limit"); ++ if (IS_ERR(ctrl->vdd_limit_regulator)) { ++ rc = PTR_ERR(ctrl->vdd_limit_regulator); ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable to request vdd-limit regulator, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ rc = cpr3_apm_init(ctrl); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "unable to initialize APM settings, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr4_apss_parse_temp_adj_properties(ctrl); ++ if (rc) { ++ cpr3_err(ctrl, "unable to parse temperature adjustment properties, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ ctrl->sensor_count = IPQ807x_APSS_CPR_SENSOR_COUNT; ++ ++ /* ++ * APSS only has one thread (0) per controller so the zeroed ++ * array does not need further modification. ++ */ ++ ctrl->sensor_owner = devm_kcalloc(ctrl->dev, ctrl->sensor_count, ++ sizeof(*ctrl->sensor_owner), GFP_KERNEL); ++ if (!ctrl->sensor_owner) ++ return -ENOMEM; ++ ++ ctrl->ctrl_type = CPR_CTRL_TYPE_CPR4; ++ ctrl->supports_hw_closed_loop = false; ++ ctrl->use_hw_closed_loop = of_property_read_bool(ctrl->dev->of_node, ++ "qcom,cpr-hw-closed-loop"); ++ return 0; ++} ++ ++static int cpr4_apss_regulator_suspend(struct platform_device *pdev, ++ pm_message_t state) ++{ ++ struct cpr3_controller *ctrl = platform_get_drvdata(pdev); ++ ++ return cpr3_regulator_suspend(ctrl); ++} ++ ++static int cpr4_apss_regulator_resume(struct platform_device *pdev) ++{ ++ struct cpr3_controller *ctrl = platform_get_drvdata(pdev); ++ ++ return cpr3_regulator_resume(ctrl); ++} ++ ++static void ipq6018_set_mem_acc(struct regulator_dev *rdev) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ ++ ipq6018_mem_acc_tcsr[0].ioremap_addr = ++ ioremap(ipq6018_mem_acc_tcsr[0].phy_addr, 0x4); ++ ipq6018_mem_acc_tcsr[1].ioremap_addr = ++ ioremap(ipq6018_mem_acc_tcsr[1].phy_addr, 0x4); ++ ++ if ((ipq6018_mem_acc_tcsr[0].ioremap_addr != NULL) && ++ (ipq6018_mem_acc_tcsr[1].ioremap_addr != NULL) && ++ (vreg->current_corner == (vreg->corner_count - CPR3_CORNER_OFFSET))) { ++ ++ writel_relaxed(ipq6018_mem_acc_tcsr[0].value, ++ ipq6018_mem_acc_tcsr[0].ioremap_addr); ++ writel_relaxed(ipq6018_mem_acc_tcsr[1].value, ++ ipq6018_mem_acc_tcsr[1].ioremap_addr); ++ } ++} ++ ++static void ipq6018_clr_mem_acc(struct regulator_dev *rdev) ++{ ++ struct cpr3_regulator *vreg = rdev_get_drvdata(rdev); ++ ++ if ((ipq6018_mem_acc_tcsr[0].ioremap_addr != NULL) && ++ (ipq6018_mem_acc_tcsr[1].ioremap_addr != NULL) && ++ (vreg->current_corner != vreg->corner_count - CPR3_CORNER_OFFSET)) { ++ writel_relaxed(0x0, ipq6018_mem_acc_tcsr[0].ioremap_addr); ++ writel_relaxed(0x0, ipq6018_mem_acc_tcsr[1].ioremap_addr); ++ } ++ ++ iounmap(ipq6018_mem_acc_tcsr[0].ioremap_addr); ++ iounmap(ipq6018_mem_acc_tcsr[1].ioremap_addr); ++} ++ ++static struct cpr4_mem_acc_func ipq6018_mem_acc_funcs = { ++ .set_mem_acc = ipq6018_set_mem_acc, ++ .clear_mem_acc = ipq6018_clr_mem_acc ++}; ++ ++static const struct cpr4_reg_data ipq807x_cpr_apss = { ++ .cpr_valid_fuse_count = IPQ807x_APSS_FUSE_CORNERS, ++ .fuse_ref_volt = ipq807x_apss_fuse_ref_volt, ++ .fuse_step_volt = IPQ807x_APSS_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ807x_APSS_CPR_CLOCK_RATE, ++ .boost_fuse_ref_volt= IPQ807x_APSS_BOOST_FUSE_REF_VOLT, ++ .boost_ceiling_volt= IPQ807x_APSS_BOOST_CEILING_VOLT, ++ .boost_floor_volt= IPQ807x_APSS_BOOST_FLOOR_VOLT, ++ .cpr3_fuse_params = &ipq807x_fuse_params, ++ .mem_acc_funcs = NULL, ++}; ++ ++static const struct cpr4_reg_data ipq817x_cpr_apss = { ++ .cpr_valid_fuse_count = IPQ817x_APPS_FUSE_CORNERS, ++ .fuse_ref_volt = ipq807x_apss_fuse_ref_volt, ++ .fuse_step_volt = IPQ807x_APSS_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ807x_APSS_CPR_CLOCK_RATE, ++ .boost_fuse_ref_volt= IPQ807x_APSS_BOOST_FUSE_REF_VOLT, ++ .boost_ceiling_volt= IPQ807x_APSS_BOOST_CEILING_VOLT, ++ .boost_floor_volt= IPQ807x_APSS_BOOST_FLOOR_VOLT, ++ .cpr3_fuse_params = &ipq807x_fuse_params, ++ .mem_acc_funcs = NULL, ++}; ++ ++static const struct cpr4_reg_data ipq6018_cpr_apss = { ++ .cpr_valid_fuse_count = IPQ6018_APSS_FUSE_CORNERS, ++ .fuse_ref_volt = ipq6018_apss_fuse_ref_volt, ++ .fuse_step_volt = IPQ6018_APSS_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ6018_APSS_CPR_CLOCK_RATE, ++ .boost_fuse_ref_volt = IPQ6018_APSS_BOOST_FUSE_REF_VOLT, ++ .boost_ceiling_volt = IPQ6018_APSS_BOOST_CEILING_VOLT, ++ .boost_floor_volt = IPQ6018_APSS_BOOST_FLOOR_VOLT, ++ .cpr3_fuse_params = &ipq6018_fuse_params, ++ .mem_acc_funcs = &ipq6018_mem_acc_funcs, ++}; ++ ++static const struct cpr4_reg_data ipq9574_cpr_apss = { ++ .cpr_valid_fuse_count = IPQ9574_APSS_FUSE_CORNERS, ++ .fuse_ref_volt = ipq9574_apss_fuse_ref_volt, ++ .fuse_step_volt = IPQ9574_APSS_FUSE_STEP_VOLT, ++ .cpr_clk_rate = IPQ6018_APSS_CPR_CLOCK_RATE, ++ .boost_fuse_ref_volt = IPQ6018_APSS_BOOST_FUSE_REF_VOLT, ++ .boost_ceiling_volt = IPQ6018_APSS_BOOST_CEILING_VOLT, ++ .boost_floor_volt = IPQ6018_APSS_BOOST_FLOOR_VOLT, ++ .cpr3_fuse_params = &ipq9574_fuse_params, ++ .mem_acc_funcs = NULL, ++}; ++ ++static struct of_device_id cpr4_regulator_match_table[] = { ++ { ++ .compatible = "qcom,cpr4-ipq807x-apss-regulator", ++ .data = &ipq807x_cpr_apss ++ }, ++ { ++ .compatible = "qcom,cpr4-ipq817x-apss-regulator", ++ .data = &ipq817x_cpr_apss ++ }, ++ { ++ .compatible = "qcom,cpr4-ipq6018-apss-regulator", ++ .data = &ipq6018_cpr_apss ++ }, ++ { ++ .compatible = "qcom,cpr4-ipq9574-apss-regulator", ++ .data = &ipq9574_cpr_apss ++ }, ++ {} ++}; ++ ++static int cpr4_apss_regulator_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct cpr3_controller *ctrl; ++ const struct of_device_id *match; ++ struct cpr4_reg_data *cpr_data; ++ int i, rc; ++ ++ if (!dev->of_node) { ++ dev_err(dev, "Device tree node is missing\n"); ++ return -EINVAL; ++ } ++ ++ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); ++ if (!ctrl) ++ return -ENOMEM; ++ ++ match = of_match_device(cpr4_regulator_match_table, &pdev->dev); ++ if (!match) ++ return -ENODEV; ++ ++ cpr_data = (struct cpr4_reg_data *)match->data; ++ g_valid_fuse_count = cpr_data->cpr_valid_fuse_count; ++ dev_info(dev, "CPR valid fuse count: %d\n", g_valid_fuse_count); ++ ctrl->cpr_clock_rate = cpr_data->cpr_clk_rate; ++ ++ ctrl->dev = dev; ++ /* Set to false later if anything precludes CPR operation. */ ++ ctrl->cpr_allowed_hw = true; ++ ++ rc = of_property_read_string(dev->of_node, "qcom,cpr-ctrl-name", ++ &ctrl->name); ++ if (rc) { ++ cpr3_err(ctrl, "unable to read qcom,cpr-ctrl-name, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr3_map_fuse_base(ctrl, pdev); ++ if (rc) { ++ cpr3_err(ctrl, "could not map fuse base address\n"); ++ return rc; ++ } ++ ++ rc = cpr3_read_tcsr_setting(ctrl, pdev, IPQ807x_APSS_CPR_TCSR_START, ++ IPQ807x_APSS_CPR_TCSR_END); ++ if (rc) { ++ cpr3_err(ctrl, "could not read CPR tcsr setting\n"); ++ return rc; ++ } ++ ++ rc = cpr3_allocate_threads(ctrl, 0, 0); ++ if (rc) { ++ cpr3_err(ctrl, "failed to allocate CPR thread array, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ if (ctrl->thread_count != 1) { ++ cpr3_err(ctrl, "expected 1 thread but found %d\n", ++ ctrl->thread_count); ++ return -EINVAL; ++ } ++ ++ rc = cpr4_apss_init_controller(ctrl); ++ if (rc) { ++ if (rc != -EPROBE_DEFER) ++ cpr3_err(ctrl, "failed to initialize CPR controller parameters, rc=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = cpr4_apss_init_thread(&ctrl->thread[0]); ++ if (rc) { ++ cpr3_err(ctrl, "thread initialization failed, rc=%d\n", rc); ++ return rc; ++ } ++ ++ for (i = 0; i < ctrl->thread[0].vreg_count; i++) { ++ ctrl->thread[0].vreg[i].cpr4_regulator_data = cpr_data; ++ rc = cpr4_apss_init_regulator(&ctrl->thread[0].vreg[i]); ++ if (rc) { ++ cpr3_err(&ctrl->thread[0].vreg[i], "regulator initialization failed, rc=%d\n", ++ rc); ++ return rc; ++ } ++ } ++ ++ platform_set_drvdata(pdev, ctrl); ++ ++ return cpr3_regulator_register(pdev, ctrl); ++} ++ ++static int cpr4_apss_regulator_remove(struct platform_device *pdev) ++{ ++ struct cpr3_controller *ctrl = platform_get_drvdata(pdev); ++ ++ return cpr3_regulator_unregister(ctrl); ++} ++ ++static struct platform_driver cpr4_apss_regulator_driver = { ++ .driver = { ++ .name = "qcom,cpr4-apss-regulator", ++ .of_match_table = cpr4_regulator_match_table, ++ .owner = THIS_MODULE, ++ }, ++ .probe = cpr4_apss_regulator_probe, ++ .remove = cpr4_apss_regulator_remove, ++ .suspend = cpr4_apss_regulator_suspend, ++ .resume = cpr4_apss_regulator_resume, ++}; ++ ++static int cpr4_regulator_init(void) ++{ ++ return platform_driver_register(&cpr4_apss_regulator_driver); ++} ++ ++static void cpr4_regulator_exit(void) ++{ ++ platform_driver_unregister(&cpr4_apss_regulator_driver); ++} ++ ++MODULE_DESCRIPTION("CPR4 APSS regulator driver"); ++MODULE_LICENSE("GPL v2"); ++ ++arch_initcall(cpr4_regulator_init); ++module_exit(cpr4_regulator_exit); +--- /dev/null ++++ b/include/soc/qcom/socinfo.h +@@ -0,0 +1,463 @@ ++/* Copyright (c) 2009-2014, 2016, 2020, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++ ++#ifndef _ARCH_ARM_MACH_MSM_SOCINFO_H_ ++#define _ARCH_ARM_MACH_MSM_SOCINFO_H_ ++ ++#include ++ ++#define CPU_IPQ8074 323 ++#define CPU_IPQ8072 342 ++#define CPU_IPQ8076 343 ++#define CPU_IPQ8078 344 ++#define CPU_IPQ8070 375 ++#define CPU_IPQ8071 376 ++ ++#define CPU_IPQ8072A 389 ++#define CPU_IPQ8074A 390 ++#define CPU_IPQ8076A 391 ++#define CPU_IPQ8078A 392 ++#define CPU_IPQ8070A 395 ++#define CPU_IPQ8071A 396 ++ ++#define CPU_IPQ8172 397 ++#define CPU_IPQ8173 398 ++#define CPU_IPQ8174 399 ++ ++#define CPU_IPQ6018 402 ++#define CPU_IPQ6028 403 ++#define CPU_IPQ6000 421 ++#define CPU_IPQ6010 422 ++#define CPU_IPQ6005 453 ++ ++#define CPU_IPQ5010 446 ++#define CPU_IPQ5018 447 ++#define CPU_IPQ5028 448 ++#define CPU_IPQ5000 503 ++#define CPU_IPQ0509 504 ++#define CPU_IPQ0518 505 ++ ++#define CPU_IPQ9514 510 ++#define CPU_IPQ9554 512 ++#define CPU_IPQ9570 513 ++#define CPU_IPQ9574 514 ++#define CPU_IPQ9550 511 ++#define CPU_IPQ9510 521 ++ ++static inline int read_ipq_soc_version_major(void) ++{ ++ const int *prop; ++ prop = of_get_property(of_find_node_by_path("/"), "soc_version_major", ++ NULL); ++ ++ if (!prop) ++ return -EINVAL; ++ ++ return le32_to_cpu(*prop); ++} ++ ++static inline int read_ipq_cpu_type(void) ++{ ++ const int *prop; ++ prop = of_get_property(of_find_node_by_path("/"), "cpu_type", NULL); ++ /* ++ * Return Default CPU type if "cpu_type" property is not found in DTSI ++ */ ++ if (!prop) ++ return CPU_IPQ8074; ++ ++ return le32_to_cpu(*prop); ++} ++ ++static inline int cpu_is_ipq8070(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8070; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8071(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8071; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8072(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8072; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8074(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8074; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8076(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8076; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8078(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8078; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8072a(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8072A; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8074a(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8074A; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8076a(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8076A; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8078a(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8078A; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8070a(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8070A; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8071a(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8071A; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8172(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8172; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8173(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8173; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq8174(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ8174; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq6018(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ6018; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq6028(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ6028; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq6000(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ6000; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq6010(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ6010; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq6005(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ6005; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq5010(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ5010; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq5018(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ5018; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq5028(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ5028; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq5000(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ5000; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq0509(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ0509; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq0518(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ0518; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq9514(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ9514; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq9554(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ9554; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq9570(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ9570; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq9574(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ9574; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq9550(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ9550; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq9510(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return read_ipq_cpu_type() == CPU_IPQ9510; ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq807x(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq8072() || cpu_is_ipq8074() || ++ cpu_is_ipq8076() || cpu_is_ipq8078() || ++ cpu_is_ipq8070() || cpu_is_ipq8071() || ++ cpu_is_ipq8072a() || cpu_is_ipq8074a() || ++ cpu_is_ipq8076a() || cpu_is_ipq8078a() || ++ cpu_is_ipq8070a() || cpu_is_ipq8071a() || ++ cpu_is_ipq8172() || cpu_is_ipq8173() || ++ cpu_is_ipq8174(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq60xx(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq6018() || cpu_is_ipq6028() || ++ cpu_is_ipq6000() || cpu_is_ipq6010() || ++ cpu_is_ipq6005(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq50xx(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq5010() || cpu_is_ipq5018() || ++ cpu_is_ipq5028() || cpu_is_ipq5000() || ++ cpu_is_ipq0509() || cpu_is_ipq0518(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_ipq95xx(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq9514() || cpu_is_ipq9554() || ++ cpu_is_ipq9570() || cpu_is_ipq9574() || ++ cpu_is_ipq9550() || cpu_is_ipq9510(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_nss_crypto_enabled(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq807x() || cpu_is_ipq60xx() || ++ cpu_is_ipq50xx() || cpu_is_ipq9570() || ++ cpu_is_ipq9550() || cpu_is_ipq9574() || ++ cpu_is_ipq9554(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_internal_wifi_enabled(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq807x() || cpu_is_ipq60xx() || ++ cpu_is_ipq50xx() || cpu_is_ipq9514() || ++ cpu_is_ipq9554() || cpu_is_ipq9574(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_uniphy1_enabled(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq807x() || cpu_is_ipq60xx() || ++ cpu_is_ipq9554() || cpu_is_ipq9570() || ++ cpu_is_ipq9574() || cpu_is_ipq9550(); ++#else ++ return 0; ++#endif ++} ++ ++static inline int cpu_is_uniphy2_enabled(void) ++{ ++#ifdef CONFIG_ARCH_QCOM ++ return cpu_is_ipq807x() || cpu_is_ipq9570() || ++ cpu_is_ipq9574(); ++#else ++ return 0; ++#endif ++} ++ ++#endif /* _ARCH_ARM_MACH_MSM_SOCINFO_H_ */ diff --git a/target/linux/ipq807x/patches-5.15/0902-arm64-dts-ipq8074-add-label-to-clocks.patch b/target/linux/ipq807x/patches-5.15/0902-arm64-dts-ipq8074-add-label-to-clocks.patch new file mode 100644 index 0000000000..9b8b4df12b --- /dev/null +++ b/target/linux/ipq807x/patches-5.15/0902-arm64-dts-ipq8074-add-label-to-clocks.patch @@ -0,0 +1,24 @@ +From 6baf7e4abcea6f7ac21eccf072a20078b39d064c Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 9 Feb 2022 23:13:26 +0100 +Subject: [PATCH] arm64: dts: ipq8074: add label to clocks + +Add label to clocks node as that makes it easy to add the NSS fixed +clocks that are required in their DTSI. + +Signed-off-by: Robert Marko +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -15,7 +15,7 @@ + compatible = "qcom,ipq8074"; + interrupt-parent = <&intc>; + +- clocks { ++ clocks: clocks { + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32768>;