From: Rafal Boni <rafal.boni@gmail.com>
Date: Thu, 24 Oct 2024 07:06:22 +0000 (-0400)
Subject: ipq806x: Revert "ipq806x: swap lan leds for Meraki MR52"
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b5e1544f4d45795ab8750b1054c54c8880b7b96b;p=openwrt%2Fstaging%2Fblocktrron.git

ipq806x: Revert "ipq806x: swap lan leds for Meraki MR52"

This reverts commit ec8f647d168fa8f3b1eedd9b5fe665f793f3a659, as with the
current kernel version, the change actually causes the same bug it once
may have fixed -- that is, the leds are now again reversed.

I suspect this was due to a switch to a newer kernel version between when
the patch was submitted and now reversing the order of the interfaces, so
that eth0 / the LAN interface is also the interface used for PoE, and eth1
/ the WAN interface is the non-PoE interface.

Signed-off-by: Rafal Boni <rafal.boni@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16779
Signed-off-by: Robert Marko <robimarko@gmail.com>
---

diff --git a/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts
index 0d3230e6de..97b280e201 100644
--- a/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts
+++ b/target/linux/ipq806x/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq8068-mr52.dts
@@ -48,12 +48,12 @@
 
 		lan1_green {
 			label = "green:lan1";
-			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 		};
 
 		lan2_green {
 			label = "green:lan2";
-			gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_active: active {
@@ -63,12 +63,12 @@
 
 		lan1_orange {
 			label = "orange:lan1";
-			gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
 		};
 
 		lan2_orange {
 			label = "orange:lan2";
-			gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };