From: Alan Cox Date: Tue, 3 Feb 2015 13:18:03 +0000 (+0000) Subject: staging: cptm1217: blow it all away X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b5d78b7f816ecfdf274e7673e79ce165d3f052cb;p=openwrt%2Fstaging%2Fblogic.git staging: cptm1217: blow it all away We have a drivers/input layer for Synaptics products and nothing should now be using the staging driver. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 9e52bcd5356d..1a2c281ea206 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -68,8 +68,6 @@ source "drivers/staging/ft1000/Kconfig" source "drivers/staging/speakup/Kconfig" -source "drivers/staging/cptm1217/Kconfig" - source "drivers/staging/ste_rmi4/Kconfig" source "drivers/staging/nvec/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 6e0ac524c84d..bd02e9b970de 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -28,7 +28,6 @@ obj-$(CONFIG_FB_XGI) += xgifb/ obj-$(CONFIG_USB_EMXX) += emxx_udc/ obj-$(CONFIG_FT1000) += ft1000/ obj-$(CONFIG_SPEAKUP) += speakup/ -obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217) += cptm1217/ obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += ste_rmi4/ obj-$(CONFIG_MFD_NVEC) += nvec/ obj-$(CONFIG_ANDROID) += android/ diff --git a/drivers/staging/cptm1217/Kconfig b/drivers/staging/cptm1217/Kconfig deleted file mode 100644 index 43b1cc0a50a5..000000000000 --- a/drivers/staging/cptm1217/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -config TOUCHSCREEN_CLEARPAD_TM1217 - tristate "Synaptics Clearpad TM1217" - depends on I2C - depends on GPIOLIB - depends on INPUT - help - Say Y here if you have a Synaptics Clearpad TM1217 Controller - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called clearpad_tm1217. diff --git a/drivers/staging/cptm1217/Makefile b/drivers/staging/cptm1217/Makefile deleted file mode 100644 index 8961fafa80e7..000000000000 --- a/drivers/staging/cptm1217/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217) += clearpad_tm1217.o - diff --git a/drivers/staging/cptm1217/TODO b/drivers/staging/cptm1217/TODO deleted file mode 100644 index 303922465e4d..000000000000 --- a/drivers/staging/cptm1217/TODO +++ /dev/null @@ -1,5 +0,0 @@ -- Wait for the official upstream general clearpad drivers as promised over - the past few months -- Merge any device support needed from this driver into it -- Delete this driver - diff --git a/drivers/staging/cptm1217/clearpad_tm1217.c b/drivers/staging/cptm1217/clearpad_tm1217.c deleted file mode 100644 index 43046049830c..000000000000 --- a/drivers/staging/cptm1217/clearpad_tm1217.c +++ /dev/null @@ -1,671 +0,0 @@ -/* - * clearpad_tm1217.c - Touch Screen driver for Synaptics Clearpad - * TM1217 controller - * - * Copyright (C) 2008 Intel Corp - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; ifnot, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * Questions/Comments/Bug fixes to Ramesh Agarwal (ramesh.agarwal@intel.com) - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "cp_tm1217.h" - -#define CPTM1217_DEVICE_NAME "cptm1217" -#define CPTM1217_DRIVER_NAME CPTM1217_DEVICE_NAME - -#define MAX_TOUCH_SUPPORTED 2 -#define TOUCH_SUPPORTED 1 -#define SAMPLING_FREQ 80 /* Frequency in HZ */ -#define DELAY_BTWIN_SAMPLE (1000 / SAMPLING_FREQ) -#define WAIT_FOR_RESPONSE 5 /* 5msec just works */ -#define MAX_RETRIES 5 /* As above */ -#define INCREMENTAL_DELAY 5 /* As above */ - -/* Regster Definitions */ -#define TMA1217_DEV_STATUS 0x13 /* Device Status */ -#define TMA1217_INT_STATUS 0x14 /* Interrupt Status */ - -/* Controller can detect up to 2 possible finger touches. - * Each finger touch provides 12 bit X Y co-ordinates, the values are split - * across 2 registers, and an 8 bit Z value */ -#define TMA1217_FINGER_STATE 0x18 /* Finger State */ -#define TMA1217_FINGER1_X_HIGHER8 0x19 /* Higher 8 bit of X coordinate */ -#define TMA1217_FINGER1_Y_HIGHER8 0x1A /* Higher 8 bit of Y coordinate */ -#define TMA1217_FINGER1_XY_LOWER4 0x1B /* Lower 4 bits of X and Y */ -#define TMA1217_FINGER1_Z_VALUE 0x1D /* 8 bit Z value for finger 1 */ -#define TMA1217_FINGER2_X_HIGHER8 0x1E /* Higher 8 bit of X coordinate */ -#define TMA1217_FINGER2_Y_HIGHER8 0x1F /* Higher 8 bit of Y coordinate */ -#define TMA1217_FINGER2_XY_LOWER4 0x20 /* Lower 4 bits of X and Y */ -#define TMA1217_FINGER2_Z_VALUE 0x22 /* 8 bit Z value for finger 2 */ -#define TMA1217_DEVICE_CTRL 0x23 /* Device Control */ -#define TMA1217_INTERRUPT_ENABLE 0x24 /* Interrupt Enable */ -#define TMA1217_REPORT_MODE 0x2B /* Reporting Mode */ -#define TMA1217_MAX_X_LOWER8 0x31 /* Bit 0-7 for Max X */ -#define TMA1217_MAX_X_HIGHER4 0x32 /* Bit 8-11 for Max X */ -#define TMA1217_MAX_Y_LOWER8 0x33 /* Bit 0-7 for Max Y */ -#define TMA1217_MAX_Y_HIGHER4 0x34 /* Bit 8-11 for Max Y */ -#define TMA1217_DEVICE_CMD_RESET 0x67 /* Device CMD reg for reset */ -#define TMA1217_DEVICE_CMD_REZERO 0x69 /* Device CMD reg for rezero */ - -#define TMA1217_MANUFACTURER_ID 0x73 /* Manufacturer Id */ -#define TMA1217_PRODUCT_FAMILY 0x75 /* Product Family */ -#define TMA1217_FIRMWARE_REVISION 0x76 /* Firmware Revision */ -#define TMA1217_SERIAL_NO_HIGH 0x7C /* Bit 8-15 of device serial no. */ -#define TMA1217_SERIAL_NO_LOW 0x7D /* Bit 0-7 of device serial no. */ -#define TMA1217_PRODUCT_ID_START 0x7E /* Start address for 10 byte ID */ -#define TMA1217_DEVICE_CAPABILITY 0x8B /* Reporting capability */ - - -/* - * The touch position structure. - */ -struct touch_state { - int x; - int y; - bool button; -}; - -/* Device Specific info given by the controller */ -struct cp_dev_info { - u16 maxX; - u16 maxY; -}; - -/* Vendor related info given by the controller */ -struct cp_vendor_info { - u8 vendor_id; - u8 product_family; - u8 firmware_rev; - u16 serial_no; -}; - -/* - * Private structure to store the device details - */ -struct cp_tm1217_device { - struct i2c_client *client; - struct device *dev; - struct cp_vendor_info vinfo; - struct cp_dev_info dinfo; - struct input_dev_info { - char phys[32]; - char name[128]; - struct input_dev *input; - struct touch_state touch; - } cp_input_info[MAX_TOUCH_SUPPORTED]; - - int thread_running; - struct mutex thread_mutex; - - int gpio; -}; - - -/* The following functions are used to read/write registers on the device - * as per the RMI prorocol. Technically, a page select should be written - * before doing read/write but since the register offsets are below 0xFF - * we can use the default value of page which is 0x00 - */ -static int cp_tm1217_read(struct cp_tm1217_device *ts, - u8 *req, int size) -{ - int i, retval; - - /* Send the address */ - retval = i2c_master_send(ts->client, &req[0], 1); - if (retval != 1) { - dev_err(ts->dev, "cp_tm1217: I2C send failed\n"); - return retval; - } - msleep(WAIT_FOR_RESPONSE); - for (i = 0; i < MAX_RETRIES; i++) { - retval = i2c_master_recv(ts->client, &req[1], size); - if (retval == size) - break; - - msleep(INCREMENTAL_DELAY); - dev_dbg(ts->dev, "cp_tm1217: Retry count is %d\n", i); - } - if (retval != size) - dev_err(ts->dev, "cp_tm1217: Read from device failed\n"); - - return retval; -} - -static int cp_tm1217_write(struct cp_tm1217_device *ts, - u8 *req, int size) -{ - int retval; - - /* Send the address and the data to be written */ - retval = i2c_master_send(ts->client, &req[0], size + 1); - if (retval != size + 1) { - dev_err(ts->dev, "cp_tm1217: I2C write failed: %d\n", retval); - return retval; - } - /* Wait for the write to complete. TBD why this is required */ - msleep(WAIT_FOR_RESPONSE); - - return size; -} - -static int cp_tm1217_mask_interrupt(struct cp_tm1217_device *ts) -{ - u8 req[2]; - int retval; - - req[0] = TMA1217_INTERRUPT_ENABLE; - req[1] = 0x0; - retval = cp_tm1217_write(ts, req, 1); - if (retval != 1) - return -EIO; - - return 0; -} - -static int cp_tm1217_unmask_interrupt(struct cp_tm1217_device *ts) -{ - u8 req[2]; - int retval; - - req[0] = TMA1217_INTERRUPT_ENABLE; - req[1] = 0xa; - retval = cp_tm1217_write(ts, req, 1); - if (retval != 1) - return -EIO; - - return 0; -} - -static void process_touch(struct cp_tm1217_device *ts, int index) -{ - int retval; - struct input_dev_info *input_info = - (struct input_dev_info *)&ts->cp_input_info[index]; - u8 xy_data[6]; - - if (index == 0) - xy_data[0] = TMA1217_FINGER1_X_HIGHER8; - else - xy_data[0] = TMA1217_FINGER2_X_HIGHER8; - - retval = cp_tm1217_read(ts, xy_data, 5); - if (retval < 5) { - dev_err(ts->dev, "cp_tm1217: XY read from device failed\n"); - return; - } - - /* Note: Currently not using the Z values but may be requried in - the future. */ - input_info->touch.x = (xy_data[1] << 4) - | (xy_data[3] & 0x0F); - input_info->touch.y = (xy_data[2] << 4) - | ((xy_data[3] & 0xF0) >> 4); - input_report_abs(input_info->input, ABS_X, input_info->touch.x); - input_report_abs(input_info->input, ABS_Y, input_info->touch.y); - input_sync(input_info->input); -} - -static void cp_tm1217_get_data(struct cp_tm1217_device *ts) -{ - u8 req[2]; - int retval, i, finger_touched = 0; - - do { - req[0] = TMA1217_FINGER_STATE; - retval = cp_tm1217_read(ts, req, 1); - if (retval != 1) { - dev_err(ts->dev, - "cp_tm1217: Read from device failed\n"); - continue; - } - finger_touched = 0; - /* Start sampling until the pressure is below - threshold */ - for (i = 0; i < TOUCH_SUPPORTED; i++) { - if (req[1] & 0x3) { - finger_touched++; - if (ts->cp_input_info[i].touch.button == 0) { - /* send the button touch event */ - input_report_key( - ts->cp_input_info[i].input, - BTN_TOUCH, 1); - ts->cp_input_info[i].touch.button = 1; - } - process_touch(ts, i); - } else { - if (ts->cp_input_info[i].touch.button == 1) { - /* send the button release event */ - input_report_key( - ts->cp_input_info[i].input, - BTN_TOUCH, 0); - input_sync(ts->cp_input_info[i].input); - ts->cp_input_info[i].touch.button = 0; - } - } - req[1] = req[1] >> 2; - } - msleep(DELAY_BTWIN_SAMPLE); - } while (finger_touched > 0); -} - -static irqreturn_t cp_tm1217_sample_thread(int irq, void *handle) -{ - struct cp_tm1217_device *ts = handle; - u8 req[2]; - int retval; - - /* Chedk if another thread is already running */ - mutex_lock(&ts->thread_mutex); - if (ts->thread_running == 1) { - mutex_unlock(&ts->thread_mutex); - return IRQ_HANDLED; - } - - ts->thread_running = 1; - mutex_unlock(&ts->thread_mutex); - - /* Mask the interrupts */ - retval = cp_tm1217_mask_interrupt(ts); - - /* Read the Interrupt Status register to find the cause of the - Interrupt */ - req[0] = TMA1217_INT_STATUS; - retval = cp_tm1217_read(ts, req, 1); - if (retval != 1) - goto exit_thread; - - if (!(req[1] & 0x8)) - goto exit_thread; - - cp_tm1217_get_data(ts); - -exit_thread: - /* Unmask the interrupts before going to sleep */ - retval = cp_tm1217_unmask_interrupt(ts); - - mutex_lock(&ts->thread_mutex); - ts->thread_running = 0; - mutex_unlock(&ts->thread_mutex); - - return IRQ_HANDLED; -} - -static int cp_tm1217_init_data(struct cp_tm1217_device *ts) -{ - int retval; - u8 req[2]; - - /* Read the vendor id/ fw revision etc. Ignoring return check as this - is non critical info */ - req[0] = TMA1217_MANUFACTURER_ID; - retval = cp_tm1217_read(ts, req, 1); - ts->vinfo.vendor_id = req[1]; - - req[0] = TMA1217_PRODUCT_FAMILY; - retval = cp_tm1217_read(ts, req, 1); - ts->vinfo.product_family = req[1]; - - req[0] = TMA1217_FIRMWARE_REVISION; - retval = cp_tm1217_read(ts, req, 1); - ts->vinfo.firmware_rev = req[1]; - - req[0] = TMA1217_SERIAL_NO_HIGH; - retval = cp_tm1217_read(ts, req, 1); - ts->vinfo.serial_no = (req[1] << 8); - - req[0] = TMA1217_SERIAL_NO_LOW; - retval = cp_tm1217_read(ts, req, 1); - ts->vinfo.serial_no = ts->vinfo.serial_no | req[1]; - - req[0] = TMA1217_MAX_X_HIGHER4; - retval = cp_tm1217_read(ts, req, 1); - ts->dinfo.maxX = (req[1] & 0xF) << 8; - - req[0] = TMA1217_MAX_X_LOWER8; - retval = cp_tm1217_read(ts, req, 1); - ts->dinfo.maxX = ts->dinfo.maxX | req[1]; - - req[0] = TMA1217_MAX_Y_HIGHER4; - retval = cp_tm1217_read(ts, req, 1); - ts->dinfo.maxY = (req[1] & 0xF) << 8; - - req[0] = TMA1217_MAX_Y_LOWER8; - retval = cp_tm1217_read(ts, req, 1); - ts->dinfo.maxY = ts->dinfo.maxY | req[1]; - - return 0; - -} - -/* - * Set up a GPIO for use as the interrupt. We can't simply do this at - * boot time because the GPIO drivers themselves may not be around at - * boot/firmware set up time to do the work. Instead defer it to driver - * detection. - */ - -static int cp_tm1217_setup_gpio_irq(struct cp_tm1217_device *ts) -{ - int retval; - - /* Hook up the irq handler */ - retval = gpio_request(ts->gpio, "cp_tm1217_touch"); - if (retval < 0) { - dev_err(ts->dev, "cp_tm1217: GPIO request failed error %d\n", - retval); - return retval; - } - - retval = gpio_direction_input(ts->gpio); - if (retval < 0) { - dev_err(ts->dev, - "cp_tm1217: GPIO direction configuration failed, error %d\n", - retval); - gpio_free(ts->gpio); - return retval; - } - - retval = gpio_to_irq(ts->gpio); - if (retval < 0) { - dev_err(ts->dev, - "cp_tm1217: GPIO to IRQ failed, error %d\n", retval); - gpio_free(ts->gpio); - } - dev_dbg(ts->dev, - "cp_tm1217: Got IRQ number is %d for GPIO %d\n", - retval, ts->gpio); - return retval; -} - -static int cp_tm1217_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct cp_tm1217_device *ts; - struct input_dev *input_dev; - struct input_dev_info *input_info; - struct cp_tm1217_platform_data *pdata; - u8 req[2]; - int i, retval; - - /* No pdata is fine - we then use "normal" IRQ mode */ - - pdata = client->dev.platform_data; - - ts = kzalloc(sizeof(struct cp_tm1217_device), GFP_KERNEL); - if (!ts) - return -ENOMEM; - - ts->client = client; - ts->dev = &client->dev; - i2c_set_clientdata(client, ts); - - ts->thread_running = 0; - mutex_init(&ts->thread_mutex); - - /* Reset the Controller */ - req[0] = TMA1217_DEVICE_CMD_RESET; - req[1] = 0x1; - retval = cp_tm1217_write(ts, req, 1); - if (retval != 1) { - dev_err(ts->dev, "cp_tm1217: Controller reset failed\n"); - kfree(ts); - return -EIO; - } - - /* Clear up the interrupt status from reset. */ - req[0] = TMA1217_INT_STATUS; - retval = cp_tm1217_read(ts, req, 1); - - /* Mask all the interrupts */ - retval = cp_tm1217_mask_interrupt(ts); - if (retval) { - dev_err(ts->dev, "failed to mask interrupts, error: %d\n", - retval); - kfree(ts); - return retval; - } - - /* Read the controller information */ - cp_tm1217_init_data(ts); - - /* The following code will register multiple event devices when - multi-pointer is enabled, the code has not been tested - with MPX */ - for (i = 0; i < TOUCH_SUPPORTED; i++) { - input_dev = input_allocate_device(); - if (input_dev == NULL) { - retval = -ENOMEM; - goto fail; - } - input_info = &ts->cp_input_info[i]; - snprintf(input_info->name, sizeof(input_info->name), - "cp_tm1217_touchscreen_%d", i); - input_dev->name = input_info->name; - snprintf(input_info->phys, sizeof(input_info->phys), - "%s/input%d", dev_name(&client->dev), i); - - input_dev->phys = input_info->phys; - input_dev->id.bustype = BUS_I2C; - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - - input_set_abs_params(input_dev, ABS_X, 0, ts->dinfo.maxX, 0, 0); - input_set_abs_params(input_dev, ABS_Y, 0, ts->dinfo.maxY, 0, 0); - - retval = input_register_device(input_dev); - if (retval) { - dev_err(ts->dev, - "Input dev registration failed for %s\n", - input_dev->name); - input_free_device(input_dev); - goto fail; - } - input_info->input = input_dev; - } - - /* Setup the reporting mode to send an interrupt only when - finger arrives or departs. */ - req[0] = TMA1217_REPORT_MODE; - req[1] = 0x02; - retval = cp_tm1217_write(ts, req, 1); - - /* Setup the device to no sleep mode for now and make it configured */ - req[0] = TMA1217_DEVICE_CTRL; - req[1] = 0x84; - retval = cp_tm1217_write(ts, req, 1); - - /* Check for the status of the device */ - req[0] = TMA1217_DEV_STATUS; - retval = cp_tm1217_read(ts, req, 1); - if (req[1] != 0) { - dev_err(ts->dev, - "cp_tm1217: Device Status 0x%x != 0: config failed\n", - req[1]); - - retval = -EIO; - goto fail; - } - - if (pdata && pdata->gpio) { - ts->gpio = pdata->gpio; - retval = cp_tm1217_setup_gpio_irq(ts); - } else - retval = client->irq; - - if (retval < 0) { - dev_err(ts->dev, "cp_tm1217: GPIO request failed error %d\n", - retval); - goto fail; - } - - client->irq = retval; - - - retval = request_threaded_irq(client->irq, - NULL, cp_tm1217_sample_thread, - IRQF_TRIGGER_FALLING, "cp_tm1217_touch", ts); - if (retval < 0) { - dev_err(ts->dev, "cp_tm1217: Request IRQ error %d\n", retval); - goto fail_gpio; - } - - /* Unmask the interrupts */ - retval = cp_tm1217_unmask_interrupt(ts); - if (retval == 0) - return 0; - - free_irq(client->irq, ts); -fail_gpio: - if (ts->gpio) - gpio_free(ts->gpio); -fail: - /* Clean up before returning failure */ - for (i = 0; i < TOUCH_SUPPORTED; i++) { - if (ts->cp_input_info[i].input) - input_unregister_device(ts->cp_input_info[i].input); - } - kfree(ts); - return retval; - -} - -#ifdef CONFIG_PM_SLEEP - -/* - * cp_tm1217 suspend - * - */ -static int cp_tm1217_suspend(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct cp_tm1217_device *ts = i2c_get_clientdata(client); - u8 req[2]; - int retval; - - /* Put the controller to sleep */ - req[0] = TMA1217_DEVICE_CTRL; - retval = cp_tm1217_read(ts, req, 1); - req[1] = (req[1] & 0xF8) | 0x1; - retval = cp_tm1217_write(ts, req, 1); - - if (device_may_wakeup(&client->dev)) - enable_irq_wake(client->irq); - - return 0; -} - -/* - * cp_tm1217_resume - * - */ -static int cp_tm1217_resume(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct cp_tm1217_device *ts = i2c_get_clientdata(client); - u8 req[2]; - int retval; - - /* Take the controller out of sleep */ - req[0] = TMA1217_DEVICE_CTRL; - retval = cp_tm1217_read(ts, req, 1); - req[1] = (req[1] & 0xF8) | 0x4; - retval = cp_tm1217_write(ts, req, 1); - - /* Restore the register settings sinc the power to the - could have been cut off */ - - /* Setup the reporting mode to send an interrupt only when - finger arrives or departs. */ - req[0] = TMA1217_REPORT_MODE; - req[1] = 0x02; - retval = cp_tm1217_write(ts, req, 1); - - /* Setup the device to no sleep mode for now and make it configured */ - req[0] = TMA1217_DEVICE_CTRL; - req[1] = 0x84; - retval = cp_tm1217_write(ts, req, 1); - - /* Setup the interrupt mask */ - retval = cp_tm1217_unmask_interrupt(ts); - - if (device_may_wakeup(&client->dev)) - disable_irq_wake(client->irq); - - return 0; -} - -#endif - -static SIMPLE_DEV_PM_OPS(cp_tm1217_pm_ops, cp_tm1217_suspend, - cp_tm1217_resume); - -/* - * cp_tm1217_remove - * - */ -static int cp_tm1217_remove(struct i2c_client *client) -{ - struct cp_tm1217_device *ts = i2c_get_clientdata(client); - int i; - - free_irq(client->irq, ts); - if (ts->gpio) - gpio_free(ts->gpio); - for (i = 0; i < TOUCH_SUPPORTED; i++) - input_unregister_device(ts->cp_input_info[i].input); - kfree(ts); - return 0; -} - -static struct i2c_device_id cp_tm1217_idtable[] = { - { CPTM1217_DEVICE_NAME, 0 }, - { } -}; - -MODULE_DEVICE_TABLE(i2c, cp_tm1217_idtable); - -static struct i2c_driver cp_tm1217_driver = { - .driver = { - .owner = THIS_MODULE, - .name = CPTM1217_DRIVER_NAME, - .pm = &cp_tm1217_pm_ops, - }, - .id_table = cp_tm1217_idtable, - .probe = cp_tm1217_probe, - .remove = cp_tm1217_remove, -}; - -module_i2c_driver(cp_tm1217_driver); - -MODULE_AUTHOR("Ramesh Agarwal "); -MODULE_DESCRIPTION("Synaptics TM1217 TouchScreen Driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/cptm1217/cp_tm1217.h b/drivers/staging/cptm1217/cp_tm1217.h deleted file mode 100644 index 30bad357a055..000000000000 --- a/drivers/staging/cptm1217/cp_tm1217.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __LINUX_I2C_CP_TM1217_H -#define __LINUX_I2C_CP_TM1217_H - -struct cp_tm1217_platform_data { - int gpio; /* If not set uses the IRQ resource 0 */ -}; - -#endif