From: Hauke Mehrtens Date: Thu, 23 Nov 2017 18:17:11 +0000 (+0100) Subject: sunxi: remove support for kernel 4.4 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b5d52b205285df826dea709933b4a20cd192242f;p=openwrt%2Fstaging%2Fynezz.git sunxi: remove support for kernel 4.4 Kernel 4.9 is working good on this target, remove support for kernel 4.4 now. Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/sunxi/config-4.4 b/target/linux/sunxi/config-4.4 deleted file mode 100644 index 907fc50969..0000000000 --- a/target/linux/sunxi/config-4.4 +++ /dev/null @@ -1,549 +0,0 @@ -CONFIG_ADVISE_SYSCALLS=y -# CONFIG_AHCI_SUNXI is not set -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_APM_EMULATION is not set -# CONFIG_ARCH_AXXIA is not set -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=416 -CONFIG_ARCH_PHYS_ADDR_T_64BIT=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUNXI=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_ARM=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARM_ERRATA_643719=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_LPAE=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_PMU=y -CONFIG_ARM_PSCI=y -CONFIG_ARM_PSCI_FW=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATA=y -CONFIG_ATAGS=y -# CONFIG_ATA_SFF is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_AUDIT_GENERIC=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_AXP20X_POWER=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_PWM=y -CONFIG_BINFMT_MISC=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BOUNCE=y -# CONFIG_BPF_SYSCALL is not set -CONFIG_CACHE_L2X0=y -CONFIG_CAN=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLKSRC_OF=y -CONFIG_CLKSRC_PROBE=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMPACTION=y -CONFIG_CONFIGFS_FS=y -CONFIG_CONNECTOR=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_COREDUMP=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_SUN4I_SS=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_UART_8250 is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_SUN4I=y -CONFIG_DMA_SUN6I=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DNOTIFY=y -CONFIG_DTC=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_DWMAC_GENERIC=y -CONFIG_DWMAC_SUNXI=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_ELF_CORE=y -# CONFIG_EMBEDDED is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -CONFIG_EXT4_FS=y -CONFIG_EXTCON=y -# CONFIG_F2FS_CHECK_FS is not set -CONFIG_F2FS_FS=y -# CONFIG_F2FS_FS_SECURITY is not set -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_STAT_FS=y -CONFIG_FAT_FS=y -CONFIG_FB=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_CMDLINE=y -CONFIG_FB_FOREIGN_ENDIAN=y -CONFIG_FB_LITTLE_ENDIAN=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_SIMPLE=y -CONFIG_FB_TILEBLITTING=y -CONFIG_FIX_EARLYCON_MEM=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x16=y -CONFIG_FONT_8x8=y -CONFIG_FONT_SUPPORT=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FRAME_WARN=2048 -CONFIG_FREEZER=y -CONFIG_FS_MBCACHE=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GLOB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_GPIO_SYSFS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_RCU_GUP=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y -CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y -CONFIG_HAVE_KVM_EVENTFD=y -CONFIG_HAVE_KVM_IRQFD=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_RCU_TABLE_FREE=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_HOTPLUG_CPU=y -# CONFIG_HUGETLBFS is not set -CONFIG_HWMON=y -CONFIG_HW_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_TIMERIOMEM=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_MV64XXX=y -CONFIG_I2C_SUN6I_P2WI=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -CONFIG_INPUT_AXP20X_PEK=y -CONFIG_INPUT_KEYBOARD=y -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_IOMMU_HELPER=y -CONFIG_IOSCHED_CFQ=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -CONFIG_KALLSYMS=y -# CONFIG_KERNEL_MODE_NEON is not set -CONFIG_KEYBOARD_SUN4I_LRADC=y -CONFIG_KSM=y -CONFIG_KVM=y -CONFIG_KVM_ARM_HOST=y -CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y -CONFIG_KVM_MMIO=y -CONFIG_KVM_VFIO=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_PLATFORM=y -CONFIG_LEDS_GPIO=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_LIBFDT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_SUN4I=y -CONFIG_MACH_SUN5I=y -CONFIG_MACH_SUN6I=y -CONFIG_MACH_SUN7I=y -CONFIG_MACH_SUN8I=y -CONFIG_MACH_SUN9I=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MDIO_SUN4I=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_MFD_AXP20X=y -CONFIG_MFD_CORE=y -CONFIG_MFD_SUN6I_PRCM=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_SUNXI=y -CONFIG_MMU_NOTIFIER=y -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MTD is not set -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_VENDOR_ALLWINNER=y -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NO_BOOTMEM=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=8 -CONFIG_NVMEM=y -CONFIG_NVMEM_SUNXI_SID=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_PARTITION_ADVANCED is not set -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS_GENERIC is not set -# CONFIG_PCI_SYSCALL is not set -CONFIG_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=3 -CONFIG_PHYLIB=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_PHY_SUN4I_USB=y -CONFIG_PHY_SUN9I_USB=y -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PINCTRL_SUN4I_A10=y -CONFIG_PINCTRL_SUN5I_A10S=y -CONFIG_PINCTRL_SUN5I_A13=y -CONFIG_PINCTRL_SUN6I_A31=y -CONFIG_PINCTRL_SUN6I_A31S=y -CONFIG_PINCTRL_SUN6I_A31_R=y -CONFIG_PINCTRL_SUN7I_A20=y -CONFIG_PINCTRL_SUN8I_A23=y -CONFIG_PINCTRL_SUN8I_A23_R=y -CONFIG_PINCTRL_SUN8I_A33=y -CONFIG_PINCTRL_SUN8I_A83T=y -CONFIG_PINCTRL_SUN8I_H3=y -CONFIG_PINCTRL_SUN9I_A80=y -CONFIG_PINCTRL_SUNXI_COMMON=y -# CONFIG_PL310_ERRATA_588369 is not set -# CONFIG_PL310_ERRATA_727915 is not set -# CONFIG_PL310_ERRATA_753970 is not set -# CONFIG_PL310_ERRATA_769419 is not set -CONFIG_PM=y -CONFIG_PM_CLK=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_OPP=y -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -CONFIG_PREEMPT=y -CONFIG_PREEMPT_COUNT=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_PREEMPT_RCU=y -CONFIG_PRINTK_TIME=y -CONFIG_PROC_EVENTS=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_PWM=y -CONFIG_PWM_SUN4I=y -CONFIG_PWM_SYSFS=y -CONFIG_RATIONAL=y -# CONFIG_RCU_BOOST is not set -CONFIG_RCU_STALL_COMMON=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_IRQ=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_AXP20X=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_GPIO=y -CONFIG_RELAY=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_SUNXI is not set -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SATA_PMP=y -# CONFIG_SCHED_INFO is not set -CONFIG_SCSI=y -CONFIG_SDIO_UART=y -CONFIG_SECURITYFS=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -CONFIG_SERIAL_8250_DW=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_NR_UARTS=8 -CONFIG_SERIAL_8250_RUNTIME_UARTS=8 -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SND=y -CONFIG_SND_COMPRESS_OFFLOAD=y -CONFIG_SND_JACK=y -CONFIG_SND_PCM=y -CONFIG_SND_SOC=y -CONFIG_SND_SOC_I2C_AND_SPI=y -# CONFIG_SND_USB is not set -CONFIG_SOUND=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_SUN4I=y -CONFIG_SPI_SUN6I=y -CONFIG_SRCU=y -# CONFIG_STAGING is not set -CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y -CONFIG_STRICT_DEVMEM=y -# CONFIG_SUN4I_EMAC is not set -CONFIG_SUN4I_TIMER=y -CONFIG_SUN5I_HSTIMER=y -CONFIG_SUNXI_RSB=y -CONFIG_SUNXI_SRAM=y -CONFIG_SUNXI_WATCHDOG=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_B53=y -# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set -CONFIG_SWCONFIG_B53_PHY_DRIVER=y -CONFIG_SWCONFIG_B53_PHY_FIXUP=y -# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set -CONFIG_SWIOTLB=y -CONFIG_SWP_EMULATE=y -CONFIG_SYSFS_SYSCALL=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_SYS_SUPPORTS_HUGETLBFS=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TOUCHSCREEN_PROPERTIES=y -CONFIG_TOUCHSCREEN_SUN4I=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -# CONFIG_USB_AUDIO is not set -CONFIG_USB_COMMON=y -CONFIG_USB_DWC2=y -CONFIG_USB_DWC2_HOST=y -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -# CONFIG_USB_ETH is not set -CONFIG_USB_GADGET=y -CONFIG_USB_NET_DRIVERS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SUPPORT=y -CONFIG_USERIO=y -CONFIG_USE_OF=y -CONFIG_VDSO=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFAT_FS=y -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_VHOST=y -CONFIG_VHOST_NET=y -CONFIG_VHOST_RING=y -CONFIG_VIRTUALIZATION=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/sunxi/patches-4.4/100-clk-sunxi-add-dram-gates-support.patch b/target/linux/sunxi/patches-4.4/100-clk-sunxi-add-dram-gates-support.patch deleted file mode 100644 index a94e9b8778..0000000000 --- a/target/linux/sunxi/patches-4.4/100-clk-sunxi-add-dram-gates-support.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 6d3a47c29186aa8d26ff05a6209c94291ace0696 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Sat, 5 Dec 2015 21:16:42 +0800 -Subject: [PATCH] clk: sunxi: Add DRAM gates support for sun4i-a10 - -The A10/A20 share the same set of DRAM clock gates, which controls -direct memory access for some peripherals. - -On the A10, bit 15 controls the system's DRAM clock output (possibly -to the DRAM chips), which we need to keep on. - -On the A20 this has been moved to the DRAM controller, becoming a no-op. -However it is still listed in the user manual, so add it anyway. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Maxime Ripard ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 1 + - drivers/clk/sunxi/clk-simple-gates.c | 12 ++++++++++++ - 2 files changed, 13 insertions(+) - ---- a/drivers/clk/sunxi/clk-simple-gates.c -+++ b/drivers/clk/sunxi/clk-simple-gates.c -@@ -160,3 +160,15 @@ CLK_OF_DECLARE(sun5i_a13_ahb, "allwinner - sun4i_a10_ahb_init); - CLK_OF_DECLARE(sun7i_a20_ahb, "allwinner,sun7i-a20-ahb-gates-clk", - sun4i_a10_ahb_init); -+ -+static const int sun4i_a10_dram_critical_clocks[] __initconst = { -+ 15, /* dram_output */ -+}; -+ -+static void __init sun4i_a10_dram_init(struct device_node *node) -+{ -+ sunxi_simple_gates_setup(node, sun4i_a10_dram_critical_clocks, -+ ARRAY_SIZE(sun4i_a10_dram_critical_clocks)); -+} -+CLK_OF_DECLARE(sun4i_a10_dram, "allwinner,sun4i-a10-dram-gates-clk", -+ sun4i_a10_dram_init); diff --git a/target/linux/sunxi/patches-4.4/101-dt-sun4i-add-dram-gates.patch b/target/linux/sunxi/patches-4.4/101-dt-sun4i-add-dram-gates.patch deleted file mode 100644 index e21eca4e1f..0000000000 --- a/target/linux/sunxi/patches-4.4/101-dt-sun4i-add-dram-gates.patch +++ /dev/null @@ -1,88 +0,0 @@ -From 82f8582feef4c048ee7ef0155a71c23614a7856d Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Sat, 5 Dec 2015 21:16:44 +0800 -Subject: [PATCH] ARM: dts: sun4i: Add DRAM gates - -The DRAM gates controls direct memory access for some peripherals. -These peripherals include the display pipeline, so add the required -gates to the simplefb nodes as well. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 36 ++++++++++++++++++++++++++++++++---- - 1 file changed, 32 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -66,7 +66,7 @@ - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, -- <&ahb_gates 44>; -+ <&ahb_gates 44>, <&dram_gates 26>; - status = "disabled"; - }; - -@@ -75,7 +75,8 @@ - "simple-framebuffer"; - allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, -- <&ahb_gates 44>, <&ahb_gates 46>; -+ <&ahb_gates 44>, <&ahb_gates 46>, -+ <&dram_gates 25>, <&dram_gates 26>; - status = "disabled"; - }; - -@@ -84,7 +85,8 @@ - "simple-framebuffer"; - allwinner,pipeline = "de_fe0-de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>, -- <&ahb_gates 46>; -+ <&ahb_gates 46>, <&dram_gates 25>, -+ <&dram_gates 26>; - status = "disabled"; - }; - -@@ -93,7 +95,8 @@ - "simple-framebuffer"; - allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, -- <&ahb_gates 44>, <&ahb_gates 46>; -+ <&ahb_gates 44>, <&ahb_gates 46>, -+ <&dram_gates 25>, <&dram_gates 26>; - status = "disabled"; - }; - }; -@@ -492,6 +495,31 @@ - clock-output-names = "spi3"; - }; - -+ dram_gates: clk@01c20100 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-a10-dram-gates-clk"; -+ reg = <0x01c20100 0x4>; -+ clocks = <&pll5 0>; -+ clock-indices = <0>, -+ <1>, <2>, -+ <3>, -+ <4>, -+ <5>, <6>, -+ <15>, -+ <24>, <25>, -+ <26>, <27>, -+ <28>, <29>; -+ clock-output-names = "dram_ve", -+ "dram_csi0", "dram_csi1", -+ "dram_ts", -+ "dram_tvd", -+ "dram_tve0", "dram_tve1", -+ "dram_output", -+ "dram_de_fe1", "dram_de_fe0", -+ "dram_de_be0", "dram_de_be1", -+ "dram_de_mp", "dram_ace"; -+ }; -+ - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; diff --git a/target/linux/sunxi/patches-4.4/102-dt-sun7i-add-dram-gates.patch b/target/linux/sunxi/patches-4.4/102-dt-sun7i-add-dram-gates.patch deleted file mode 100644 index 397269076c..0000000000 --- a/target/linux/sunxi/patches-4.4/102-dt-sun7i-add-dram-gates.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 0b4bf5a5200b9ac5ddf545665f171feb5594677d Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Sat, 5 Dec 2015 21:16:46 +0800 -Subject: [PATCH] ARM: dts: sun7i: Add DRAM gates - -The DRAM gates controls direct memory access for some peripherals. -These peripherals include the display pipeline, so add the required -gates to the simplefb nodes as well. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 32 +++++++++++++++++++++++++++++--- - 1 file changed, 29 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -68,7 +68,7 @@ - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, -- <&ahb_gates 44>; -+ <&ahb_gates 44>, <&dram_gates 26>; - status = "disabled"; - }; - -@@ -76,7 +76,8 @@ - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0"; -- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; -+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>, -+ <&dram_gates 26>; - status = "disabled"; - }; - -@@ -85,7 +86,7 @@ - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, -- <&ahb_gates 44>; -+ <&ahb_gates 44>, <&dram_gates 26>; - status = "disabled"; - }; - }; -@@ -501,6 +502,31 @@ - clock-output-names = "spi3"; - }; - -+ dram_gates: clk@01c20100 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-a10-dram-gates-clk"; -+ reg = <0x01c20100 0x4>; -+ clocks = <&pll5 0>; -+ clock-indices = <0>, -+ <1>, <2>, -+ <3>, -+ <4>, -+ <5>, <6>, -+ <15>, -+ <24>, <25>, -+ <26>, <27>, -+ <28>, <29>; -+ clock-output-names = "dram_ve", -+ "dram_csi0", "dram_csi1", -+ "dram_ts", -+ "dram_tvd", -+ "dram_tve0", "dram_tve1", -+ "dram_output", -+ "dram_de_fe1", "dram_de_fe0", -+ "dram_de_be0", "dram_de_be1", -+ "dram_de_mp", "dram_ace"; -+ }; -+ - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; diff --git a/target/linux/sunxi/patches-4.4/103-clk-sunxi-add-h3-clksupport.patch b/target/linux/sunxi/patches-4.4/103-clk-sunxi-add-h3-clksupport.patch deleted file mode 100644 index 8bc66274c3..0000000000 --- a/target/linux/sunxi/patches-4.4/103-clk-sunxi-add-h3-clksupport.patch +++ /dev/null @@ -1,180 +0,0 @@ -From ab6e23a4e388f5f2696b8e92c350f845142da118 Mon Sep 17 00:00:00 2001 -From: Jens Kuske -Date: Fri, 4 Dec 2015 22:24:40 +0100 -Subject: [PATCH] clk: sunxi: Add H3 clocks support - -The H3 clock control unit is similar to the those of other sun8i family -members like the A23. - -It adds a new bus gates clock similar to the simple gates, but with a -different parent clock for each single gate. -Some of the gates use the new AHB2 clock as parent, whose clock source -is muxable between AHB1 and PLL6/2. The documentation isn't totally clear -about which devices belong to AHB2 now, especially USB EHIC/OHIC, so it -is mostly based on Allwinner kernel source code. - -Signed-off-by: Jens Kuske -Acked-by: Rob Herring -Signed-off-by: Maxime Ripard ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 2 + - drivers/clk/sunxi/Makefile | 1 + - drivers/clk/sunxi/clk-sun8i-bus-gates.c | 112 ++++++++++++++++++++++ - drivers/clk/sunxi/clk-sunxi.c | 6 ++ - 4 files changed, 121 insertions(+) - create mode 100644 drivers/clk/sunxi/clk-sun8i-bus-gates.c - ---- a/drivers/clk/sunxi/Makefile -+++ b/drivers/clk/sunxi/Makefile -@@ -10,6 +10,7 @@ obj-y += clk-a10-pll2.o - obj-y += clk-a20-gmac.o - obj-y += clk-mod0.o - obj-y += clk-simple-gates.o -+obj-y += clk-sun8i-bus-gates.o - obj-y += clk-sun8i-mbus.o - obj-y += clk-sun9i-core.o - obj-y += clk-sun9i-mmc.o ---- /dev/null -+++ b/drivers/clk/sunxi/clk-sun8i-bus-gates.c -@@ -0,0 +1,112 @@ -+/* -+ * Copyright (C) 2015 Jens Kuske -+ * -+ * Based on clk-simple-gates.c, which is: -+ * Copyright 2015 Maxime Ripard -+ * -+ * Maxime Ripard -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static DEFINE_SPINLOCK(gates_lock); -+ -+static void __init sun8i_h3_bus_gates_init(struct device_node *node) -+{ -+ static const char * const names[] = { "ahb1", "ahb2", "apb1", "apb2" }; -+ enum { AHB1, AHB2, APB1, APB2, PARENT_MAX } clk_parent; -+ const char *parents[PARENT_MAX]; -+ struct clk_onecell_data *clk_data; -+ const char *clk_name; -+ struct property *prop; -+ struct resource res; -+ void __iomem *clk_reg; -+ void __iomem *reg; -+ const __be32 *p; -+ int number, i; -+ u8 clk_bit; -+ u32 index; -+ -+ reg = of_io_request_and_map(node, 0, of_node_full_name(node)); -+ if (IS_ERR(reg)) -+ return; -+ -+ for (i = 0; i < ARRAY_SIZE(names); i++) { -+ index = of_property_match_string(node, "clock-names", -+ names[i]); -+ if (index < 0) -+ return; -+ -+ parents[i] = of_clk_get_parent_name(node, index); -+ } -+ -+ clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); -+ if (!clk_data) -+ goto err_unmap; -+ -+ number = of_property_count_u32_elems(node, "clock-indices"); -+ of_property_read_u32_index(node, "clock-indices", number - 1, &number); -+ -+ clk_data->clks = kcalloc(number + 1, sizeof(struct clk *), GFP_KERNEL); -+ if (!clk_data->clks) -+ goto err_free_data; -+ -+ i = 0; -+ of_property_for_each_u32(node, "clock-indices", prop, p, index) { -+ of_property_read_string_index(node, "clock-output-names", -+ i, &clk_name); -+ -+ if (index == 17 || (index >= 29 && index <= 31)) -+ clk_parent = AHB2; -+ else if (index <= 63 || index >= 128) -+ clk_parent = AHB1; -+ else if (index >= 64 && index <= 95) -+ clk_parent = APB1; -+ else if (index >= 96 && index <= 127) -+ clk_parent = APB2; -+ -+ clk_reg = reg + 4 * (index / 32); -+ clk_bit = index % 32; -+ -+ clk_data->clks[index] = clk_register_gate(NULL, clk_name, -+ parents[clk_parent], -+ 0, clk_reg, clk_bit, -+ 0, &gates_lock); -+ i++; -+ -+ if (IS_ERR(clk_data->clks[index])) { -+ WARN_ON(true); -+ continue; -+ } -+ } -+ -+ clk_data->clk_num = number + 1; -+ of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); -+ -+ return; -+ -+err_free_data: -+ kfree(clk_data); -+err_unmap: -+ iounmap(reg); -+ of_address_to_resource(node, 0, &res); -+ release_mem_region(res.start, resource_size(&res)); -+} -+ -+CLK_OF_DECLARE(sun8i_h3_bus_gates, "allwinner,sun8i-h3-bus-gates-clk", -+ sun8i_h3_bus_gates_init); ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -778,6 +778,10 @@ static const struct mux_data sun6i_a31_a - .shift = 12, - }; - -+static const struct mux_data sun8i_h3_ahb2_mux_data __initconst = { -+ .shift = 0, -+}; -+ - static void __init sunxi_mux_clk_setup(struct device_node *node, - struct mux_data *data) - { -@@ -1130,6 +1134,7 @@ static const struct of_device_id clk_div - static const struct of_device_id clk_mux_match[] __initconst = { - {.compatible = "allwinner,sun4i-a10-cpu-clk", .data = &sun4i_cpu_mux_data,}, - {.compatible = "allwinner,sun6i-a31-ahb1-mux-clk", .data = &sun6i_a31_ahb1_mux_data,}, -+ {.compatible = "allwinner,sun8i-h3-ahb2-clk", .data = &sun8i_h3_ahb2_mux_data,}, - {} - }; - -@@ -1212,6 +1217,7 @@ CLK_OF_DECLARE(sun6i_a31_clk_init, "allw - CLK_OF_DECLARE(sun6i_a31s_clk_init, "allwinner,sun6i-a31s", sun6i_init_clocks); - CLK_OF_DECLARE(sun8i_a23_clk_init, "allwinner,sun8i-a23", sun6i_init_clocks); - CLK_OF_DECLARE(sun8i_a33_clk_init, "allwinner,sun8i-a33", sun6i_init_clocks); -+CLK_OF_DECLARE(sun8i_h3_clk_init, "allwinner,sun8i-h3", sun6i_init_clocks); - - static void __init sun9i_init_clocks(struct device_node *node) - { diff --git a/target/linux/sunxi/patches-4.4/104-1-dt-sunxi-add-h3-dtsi.patch b/target/linux/sunxi/patches-4.4/104-1-dt-sunxi-add-h3-dtsi.patch deleted file mode 100644 index 35a653c5fe..0000000000 --- a/target/linux/sunxi/patches-4.4/104-1-dt-sunxi-add-h3-dtsi.patch +++ /dev/null @@ -1,515 +0,0 @@ -From 318d93bc41823e86967c8251eef0444a72e4d687 Mon Sep 17 00:00:00 2001 -From: Jens Kuske -Date: Fri, 4 Dec 2015 22:24:42 +0100 -Subject: [PATCH] ARM: dts: sunxi: Add Allwinner H3 DTSI - -The Allwinner H3 is a home entertainment system oriented SoC with -four Cortex-A7 cores and a Mali-400MP2 GPU. - -Signed-off-by: Jens Kuske -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun8i-h3.dtsi | 497 ++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 497 insertions(+) - create mode 100644 arch/arm/boot/dts/sun8i-h3.dtsi - ---- /dev/null -+++ b/arch/arm/boot/dts/sun8i-h3.dtsi -@@ -0,0 +1,497 @@ -+/* -+ * Copyright (C) 2015 Jens Kuske -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+#include "skeleton.dtsi" -+ -+#include -+#include -+ -+/ { -+ interrupt-parent = <&gic>; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu@0 { -+ compatible = "arm,cortex-a7"; -+ device_type = "cpu"; -+ reg = <0>; -+ }; -+ -+ cpu@1 { -+ compatible = "arm,cortex-a7"; -+ device_type = "cpu"; -+ reg = <1>; -+ }; -+ -+ cpu@2 { -+ compatible = "arm,cortex-a7"; -+ device_type = "cpu"; -+ reg = <2>; -+ }; -+ -+ cpu@3 { -+ compatible = "arm,cortex-a7"; -+ device_type = "cpu"; -+ reg = <3>; -+ }; -+ }; -+ -+ timer { -+ compatible = "arm,armv7-timer"; -+ interrupts = , -+ , -+ , -+ ; -+ }; -+ -+ clocks { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ osc24M: osc24M_clk { -+ #clock-cells = <0>; -+ compatible = "fixed-clock"; -+ clock-frequency = <24000000>; -+ clock-output-names = "osc24M"; -+ }; -+ -+ osc32k: osc32k_clk { -+ #clock-cells = <0>; -+ compatible = "fixed-clock"; -+ clock-frequency = <32768>; -+ clock-output-names = "osc32k"; -+ }; -+ -+ pll1: clk@01c20000 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun8i-a23-pll1-clk"; -+ reg = <0x01c20000 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll1"; -+ }; -+ -+ /* dummy clock until actually implemented */ -+ pll5: pll5_clk { -+ #clock-cells = <0>; -+ compatible = "fixed-clock"; -+ clock-frequency = <0>; -+ clock-output-names = "pll5"; -+ }; -+ -+ pll6: clk@01c20028 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun6i-a31-pll6-clk"; -+ reg = <0x01c20028 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll6", "pll6x2"; -+ }; -+ -+ pll6d2: pll6d2_clk { -+ #clock-cells = <0>; -+ compatible = "fixed-factor-clock"; -+ clock-div = <2>; -+ clock-mult = <1>; -+ clocks = <&pll6 0>; -+ clock-output-names = "pll6d2"; -+ }; -+ -+ /* dummy clock until pll6 can be reused */ -+ pll8: pll8_clk { -+ #clock-cells = <0>; -+ compatible = "fixed-clock"; -+ clock-frequency = <1>; -+ clock-output-names = "pll8"; -+ }; -+ -+ cpu: cpu_clk@01c20050 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-cpu-clk"; -+ reg = <0x01c20050 0x4>; -+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; -+ clock-output-names = "cpu"; -+ }; -+ -+ axi: axi_clk@01c20050 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-axi-clk"; -+ reg = <0x01c20050 0x4>; -+ clocks = <&cpu>; -+ clock-output-names = "axi"; -+ }; -+ -+ ahb1: ahb1_clk@01c20054 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun6i-a31-ahb1-clk"; -+ reg = <0x01c20054 0x4>; -+ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; -+ clock-output-names = "ahb1"; -+ }; -+ -+ ahb2: ahb2_clk@01c2005c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun8i-h3-ahb2-clk"; -+ reg = <0x01c2005c 0x4>; -+ clocks = <&ahb1>, <&pll6d2>; -+ clock-output-names = "ahb2"; -+ }; -+ -+ apb1: apb1_clk@01c20054 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-apb0-clk"; -+ reg = <0x01c20054 0x4>; -+ clocks = <&ahb1>; -+ clock-output-names = "apb1"; -+ }; -+ -+ apb2: apb2_clk@01c20058 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-apb1-clk"; -+ reg = <0x01c20058 0x4>; -+ clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; -+ clock-output-names = "apb2"; -+ }; -+ -+ bus_gates: clk@01c20060 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun8i-h3-bus-gates-clk"; -+ reg = <0x01c20060 0x14>; -+ clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; -+ clock-names = "ahb1", "ahb2", "apb1", "apb2"; -+ clock-indices = <5>, <6>, <8>, -+ <9>, <10>, <13>, -+ <14>, <17>, <18>, -+ <19>, <20>, -+ <21>, <23>, -+ <24>, <25>, -+ <26>, <27>, -+ <28>, <29>, -+ <30>, <31>, <32>, -+ <35>, <36>, <37>, -+ <40>, <41>, <43>, -+ <44>, <52>, <53>, -+ <54>, <64>, -+ <65>, <69>, <72>, -+ <76>, <77>, <78>, -+ <96>, <97>, <98>, -+ <112>, <113>, -+ <114>, <115>, -+ <116>, <128>, <135>; -+ clock-output-names = "bus_ce", "bus_dma", "bus_mmc0", -+ "bus_mmc1", "bus_mmc2", "bus_nand", -+ "bus_sdram", "bus_gmac", "bus_ts", -+ "bus_hstimer", "bus_spi0", -+ "bus_spi1", "bus_otg", -+ "bus_otg_ehci0", "bus_ehci1", -+ "bus_ehci2", "bus_ehci3", -+ "bus_otg_ohci0", "bus_ohci1", -+ "bus_ohci2", "bus_ohci3", "bus_ve", -+ "bus_lcd0", "bus_lcd1", "bus_deint", -+ "bus_csi", "bus_tve", "bus_hdmi", -+ "bus_de", "bus_gpu", "bus_msgbox", -+ "bus_spinlock", "bus_codec", -+ "bus_spdif", "bus_pio", "bus_ths", -+ "bus_i2s0", "bus_i2s1", "bus_i2s2", -+ "bus_i2c0", "bus_i2c1", "bus_i2c2", -+ "bus_uart0", "bus_uart1", -+ "bus_uart2", "bus_uart3", -+ "bus_scr", "bus_ephy", "bus_dbg"; -+ }; -+ -+ mmc0_clk: clk@01c20088 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-a10-mmc-clk"; -+ reg = <0x01c20088 0x4>; -+ clocks = <&osc24M>, <&pll6 0>, <&pll8>; -+ clock-output-names = "mmc0", -+ "mmc0_output", -+ "mmc0_sample"; -+ }; -+ -+ mmc1_clk: clk@01c2008c { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-a10-mmc-clk"; -+ reg = <0x01c2008c 0x4>; -+ clocks = <&osc24M>, <&pll6 0>, <&pll8>; -+ clock-output-names = "mmc1", -+ "mmc1_output", -+ "mmc1_sample"; -+ }; -+ -+ mmc2_clk: clk@01c20090 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-a10-mmc-clk"; -+ reg = <0x01c20090 0x4>; -+ clocks = <&osc24M>, <&pll6 0>, <&pll8>; -+ clock-output-names = "mmc2", -+ "mmc2_output", -+ "mmc2_sample"; -+ }; -+ -+ mbus_clk: clk@01c2015c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun8i-a23-mbus-clk"; -+ reg = <0x01c2015c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5>; -+ clock-output-names = "mbus"; -+ }; -+ }; -+ -+ soc { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ dma: dma-controller@01c02000 { -+ compatible = "allwinner,sun8i-h3-dma"; -+ reg = <0x01c02000 0x1000>; -+ interrupts = ; -+ clocks = <&bus_gates 6>; -+ resets = <&ahb_rst 6>; -+ #dma-cells = <1>; -+ }; -+ -+ mmc0: mmc@01c0f000 { -+ compatible = "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c0f000 0x1000>; -+ clocks = <&bus_gates 8>, -+ <&mmc0_clk 0>, -+ <&mmc0_clk 1>, -+ <&mmc0_clk 2>; -+ clock-names = "ahb", -+ "mmc", -+ "output", -+ "sample"; -+ resets = <&ahb_rst 8>; -+ reset-names = "ahb"; -+ interrupts = ; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ mmc1: mmc@01c10000 { -+ compatible = "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c10000 0x1000>; -+ clocks = <&bus_gates 9>, -+ <&mmc1_clk 0>, -+ <&mmc1_clk 1>, -+ <&mmc1_clk 2>; -+ clock-names = "ahb", -+ "mmc", -+ "output", -+ "sample"; -+ resets = <&ahb_rst 9>; -+ reset-names = "ahb"; -+ interrupts = ; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ mmc2: mmc@01c11000 { -+ compatible = "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c11000 0x1000>; -+ clocks = <&bus_gates 10>, -+ <&mmc2_clk 0>, -+ <&mmc2_clk 1>, -+ <&mmc2_clk 2>; -+ clock-names = "ahb", -+ "mmc", -+ "output", -+ "sample"; -+ resets = <&ahb_rst 10>; -+ reset-names = "ahb"; -+ interrupts = ; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ pio: pinctrl@01c20800 { -+ compatible = "allwinner,sun8i-h3-pinctrl"; -+ reg = <0x01c20800 0x400>; -+ interrupts = , -+ ; -+ clocks = <&bus_gates 69>; -+ gpio-controller; -+ #gpio-cells = <3>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ -+ uart0_pins_a: uart0@0 { -+ allwinner,pins = "PA4", "PA5"; -+ allwinner,function = "uart0"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ mmc0_pins_a: mmc0@0 { -+ allwinner,pins = "PF0", "PF1", "PF2", "PF3", -+ "PF4", "PF5"; -+ allwinner,function = "mmc0"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ mmc0_cd_pin: mmc0_cd_pin@0 { -+ allwinner,pins = "PF6"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ mmc1_pins_a: mmc1@0 { -+ allwinner,pins = "PG0", "PG1", "PG2", "PG3", -+ "PG4", "PG5"; -+ allwinner,function = "mmc1"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ }; -+ -+ ahb_rst: reset@01c202c0 { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun6i-a31-ahb1-reset"; -+ reg = <0x01c202c0 0xc>; -+ }; -+ -+ apb1_rst: reset@01c202d0 { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun6i-a31-clock-reset"; -+ reg = <0x01c202d0 0x4>; -+ }; -+ -+ apb2_rst: reset@01c202d8 { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun6i-a31-clock-reset"; -+ reg = <0x01c202d8 0x4>; -+ }; -+ -+ timer@01c20c00 { -+ compatible = "allwinner,sun4i-a10-timer"; -+ reg = <0x01c20c00 0xa0>; -+ interrupts = , -+ ; -+ clocks = <&osc24M>; -+ }; -+ -+ wdt0: watchdog@01c20ca0 { -+ compatible = "allwinner,sun6i-a31-wdt"; -+ reg = <0x01c20ca0 0x20>; -+ interrupts = ; -+ }; -+ -+ uart0: serial@01c28000 { -+ compatible = "snps,dw-apb-uart"; -+ reg = <0x01c28000 0x400>; -+ interrupts = ; -+ reg-shift = <2>; -+ reg-io-width = <4>; -+ clocks = <&bus_gates 112>; -+ resets = <&apb2_rst 16>; -+ dmas = <&dma 6>, <&dma 6>; -+ dma-names = "rx", "tx"; -+ status = "disabled"; -+ }; -+ -+ uart1: serial@01c28400 { -+ compatible = "snps,dw-apb-uart"; -+ reg = <0x01c28400 0x400>; -+ interrupts = ; -+ reg-shift = <2>; -+ reg-io-width = <4>; -+ clocks = <&bus_gates 113>; -+ resets = <&apb2_rst 17>; -+ dmas = <&dma 7>, <&dma 7>; -+ dma-names = "rx", "tx"; -+ status = "disabled"; -+ }; -+ -+ uart2: serial@01c28800 { -+ compatible = "snps,dw-apb-uart"; -+ reg = <0x01c28800 0x400>; -+ interrupts = ; -+ reg-shift = <2>; -+ reg-io-width = <4>; -+ clocks = <&bus_gates 114>; -+ resets = <&apb2_rst 18>; -+ dmas = <&dma 8>, <&dma 8>; -+ dma-names = "rx", "tx"; -+ status = "disabled"; -+ }; -+ -+ uart3: serial@01c28c00 { -+ compatible = "snps,dw-apb-uart"; -+ reg = <0x01c28c00 0x400>; -+ interrupts = ; -+ reg-shift = <2>; -+ reg-io-width = <4>; -+ clocks = <&bus_gates 115>; -+ resets = <&apb2_rst 19>; -+ dmas = <&dma 9>, <&dma 9>; -+ dma-names = "rx", "tx"; -+ status = "disabled"; -+ }; -+ -+ gic: interrupt-controller@01c81000 { -+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; -+ reg = <0x01c81000 0x1000>, -+ <0x01c82000 0x1000>, -+ <0x01c84000 0x2000>, -+ <0x01c86000 0x2000>; -+ interrupt-controller; -+ #interrupt-cells = <3>; -+ interrupts = ; -+ }; -+ -+ rtc: rtc@01f00000 { -+ compatible = "allwinner,sun6i-a31-rtc"; -+ reg = <0x01f00000 0x54>; -+ interrupts = , -+ ; -+ }; -+ }; -+}; diff --git a/target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch b/target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch deleted file mode 100644 index 67094a4beb..0000000000 --- a/target/linux/sunxi/patches-4.4/104-2-dt-sun8i-add-orangepi-plus.patch +++ /dev/null @@ -1,111 +0,0 @@ -From dfcf8196de7411a5e7fd49795938b1bc8c56859c Mon Sep 17 00:00:00 2001 -From: Jens Kuske -Date: Fri, 4 Dec 2015 22:24:43 +0100 -Subject: [PATCH] ARM: dts: sun8i: Add Orange Pi Plus support - -The Orange Pi Plus is a SBC based on the Allwinner H3 SoC -with 8GB eMMC, multiple USB ports through a USB hub chip, SATA through -a USB-SATA bridge, one uSD slot, a 10/100/1000M ethernet port, -WiFi, HDMI, headphone jack, IR receiver, a microphone, a CSI connector -and a 40-pin GPIO header. - -Signed-off-by: Jens Kuske -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/Makefile | 3 +- - arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 77 ++++++++++++++++++++++++++++ - 2 files changed, 79 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -660,7 +660,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ - sun8i-a33-ga10h-v1.1.dtb \ - sun8i-a33-ippo-q8h-v1.2.dtb \ - sun8i-a33-q8-tablet.dtb \ -- sun8i-a33-sinlinx-sina33.dtb -+ sun8i-a33-sinlinx-sina33.dtb \ -+ sun8i-h3-orangepi-plus.dtb - dtb-$(CONFIG_MACH_SUN9I) += \ - sun9i-a80-optimus.dtb \ - sun9i-a80-cubieboard4.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts -@@ -0,0 +1,77 @@ -+/* -+ * Copyright (C) 2015 Jens Kuske -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include "sun8i-h3.dtsi" -+#include "sunxi-common-regulators.dtsi" -+ -+#include -+#include -+ -+/ { -+ model = "Xunlong Orange Pi Plus"; -+ compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; -+ -+ aliases { -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+}; -+ -+&mmc0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ -+ cd-inverted; -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+}; diff --git a/target/linux/sunxi/patches-4.4/105-phy-use_of_match_node.patch b/target/linux/sunxi/patches-4.4/105-phy-use_of_match_node.patch deleted file mode 100644 index 7715b585d0..0000000000 --- a/target/linux/sunxi/patches-4.4/105-phy-use_of_match_node.patch +++ /dev/null @@ -1,218 +0,0 @@ -From 5c627d8e7660c170c591ef281184fd11d0493440 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Fri, 11 Dec 2015 16:32:17 +0100 -Subject: [PATCH] phy-sun4i-usb: Use of_match_node to get model specific config - data - -Use of_match_node instead of calling of_device_is_compatible a ton of -times to get model specific config data. - -Signed-off-by: Hans de Goede -Signed-off-by: Kishon Vijay Abraham I ---- - drivers/phy/phy-sun4i-usb.c | 121 +++++++++++++++++++++++++++++--------------- - 1 file changed, 79 insertions(+), 42 deletions(-) - ---- a/drivers/phy/phy-sun4i-usb.c -+++ b/drivers/phy/phy-sun4i-usb.c -@@ -32,6 +32,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -88,12 +89,23 @@ - #define DEBOUNCE_TIME msecs_to_jiffies(50) - #define POLL_TIME msecs_to_jiffies(250) - -+enum sun4i_usb_phy_type { -+ sun4i_a10_phy, -+ sun8i_a33_phy, -+}; -+ -+struct sun4i_usb_phy_cfg { -+ int num_phys; -+ enum sun4i_usb_phy_type type; -+ u32 disc_thresh; -+ u8 phyctl_offset; -+ bool dedicated_clocks; -+}; -+ - struct sun4i_usb_phy_data { - void __iomem *base; -+ const struct sun4i_usb_phy_cfg *cfg; - struct mutex mutex; -- int num_phys; -- u32 disc_thresh; -- bool has_a33_phyctl; - struct sun4i_usb_phy { - struct phy *phy; - void __iomem *pmu; -@@ -159,17 +171,14 @@ static void sun4i_usb_phy_write(struct s - { - struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy); - u32 temp, usbc_bit = BIT(phy->index * 2); -- void *phyctl; -+ void *phyctl = phy_data->base + phy_data->cfg->phyctl_offset; - int i; - - mutex_lock(&phy_data->mutex); - -- if (phy_data->has_a33_phyctl) { -- phyctl = phy_data->base + REG_PHYCTL_A33; -+ if (phy_data->cfg->type == sun8i_a33_phy) { - /* A33 needs us to set phyctl to 0 explicitly */ - writel(0, phyctl); -- } else { -- phyctl = phy_data->base + REG_PHYCTL_A10; - } - - for (i = 0; i < len; i++) { -@@ -249,7 +258,8 @@ static int sun4i_usb_phy_init(struct phy - sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5); - - /* Disconnect threshold adjustment */ -- sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, data->disc_thresh, 2); -+ sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, -+ data->cfg->disc_thresh, 2); - - sun4i_usb_phy_passby(phy, 1); - -@@ -476,7 +486,7 @@ static struct phy *sun4i_usb_phy_xlate(s - { - struct sun4i_usb_phy_data *data = dev_get_drvdata(dev); - -- if (args->args[0] >= data->num_phys) -+ if (args->args[0] >= data->cfg->num_phys) - return ERR_PTR(-ENODEV); - - return data->phys[args->args[0]].phy; -@@ -511,7 +521,6 @@ static int sun4i_usb_phy_probe(struct pl - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - struct phy_provider *phy_provider; -- bool dedicated_clocks; - struct resource *res; - int i, ret; - -@@ -522,29 +531,9 @@ static int sun4i_usb_phy_probe(struct pl - mutex_init(&data->mutex); - INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan); - dev_set_drvdata(dev, data); -- -- if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy") || -- of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy") || -- of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy")) -- data->num_phys = 2; -- else -- data->num_phys = 3; -- -- if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy") || -- of_device_is_compatible(np, "allwinner,sun7i-a20-usb-phy")) -- data->disc_thresh = 2; -- else -- data->disc_thresh = 3; -- -- if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy") || -- of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy") || -- of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy")) -- dedicated_clocks = true; -- else -- dedicated_clocks = false; -- -- if (of_device_is_compatible(np, "allwinner,sun8i-a33-usb-phy")) -- data->has_a33_phyctl = true; -+ data->cfg = of_device_get_match_data(dev); -+ if (!data->cfg) -+ return -EINVAL; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl"); - data->base = devm_ioremap_resource(dev, res); -@@ -590,7 +579,7 @@ static int sun4i_usb_phy_probe(struct pl - } - } - -- for (i = 0; i < data->num_phys; i++) { -+ for (i = 0; i < data->cfg->num_phys; i++) { - struct sun4i_usb_phy *phy = data->phys + i; - char name[16]; - -@@ -602,7 +591,7 @@ static int sun4i_usb_phy_probe(struct pl - phy->vbus = NULL; - } - -- if (dedicated_clocks) -+ if (data->cfg->dedicated_clocks) - snprintf(name, sizeof(name), "usb%d_phy", i); - else - strlcpy(name, "usb_phy", sizeof(name)); -@@ -689,13 +678,61 @@ static int sun4i_usb_phy_probe(struct pl - return 0; - } - -+static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { -+ .num_phys = 3, -+ .type = sun4i_a10_phy, -+ .disc_thresh = 3, -+ .phyctl_offset = REG_PHYCTL_A10, -+ .dedicated_clocks = false, -+}; -+ -+static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { -+ .num_phys = 2, -+ .type = sun4i_a10_phy, -+ .disc_thresh = 2, -+ .phyctl_offset = REG_PHYCTL_A10, -+ .dedicated_clocks = false, -+}; -+ -+static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = { -+ .num_phys = 3, -+ .type = sun4i_a10_phy, -+ .disc_thresh = 3, -+ .phyctl_offset = REG_PHYCTL_A10, -+ .dedicated_clocks = true, -+}; -+ -+static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { -+ .num_phys = 3, -+ .type = sun4i_a10_phy, -+ .disc_thresh = 2, -+ .phyctl_offset = REG_PHYCTL_A10, -+ .dedicated_clocks = false, -+}; -+ -+static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = { -+ .num_phys = 2, -+ .type = sun4i_a10_phy, -+ .disc_thresh = 3, -+ .phyctl_offset = REG_PHYCTL_A10, -+ .dedicated_clocks = true, -+}; -+ -+static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = { -+ .num_phys = 2, -+ .type = sun8i_a33_phy, -+ .disc_thresh = 3, -+ .phyctl_offset = REG_PHYCTL_A33, -+ .dedicated_clocks = true, -+}; -+ - static const struct of_device_id sun4i_usb_phy_of_match[] = { -- { .compatible = "allwinner,sun4i-a10-usb-phy" }, -- { .compatible = "allwinner,sun5i-a13-usb-phy" }, -- { .compatible = "allwinner,sun6i-a31-usb-phy" }, -- { .compatible = "allwinner,sun7i-a20-usb-phy" }, -- { .compatible = "allwinner,sun8i-a23-usb-phy" }, -- { .compatible = "allwinner,sun8i-a33-usb-phy" }, -+ { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg }, -+ { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg }, -+ { .compatible = "allwinner,sun6i-a31-usb-phy", .data = &sun6i_a31_cfg }, -+ { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg }, -+ { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg }, -+ { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg }, - { }, - }; - MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); diff --git a/target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch b/target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch deleted file mode 100644 index 33943230e8..0000000000 --- a/target/linux/sunxi/patches-4.4/106-phy-add-h3-usbphys.patch +++ /dev/null @@ -1,124 +0,0 @@ -From 317c5224795b41a08ba8c08573d74ba95096faa5 Mon Sep 17 00:00:00 2001 -From: Reinder de Haan -Date: Fri, 11 Dec 2015 16:32:18 +0100 -Subject: [PATCH] phy-sun4i-usb: Add support for the host usb-phys found on the - H3 SoC - -Note this commit only adds support for phys 1-3, phy 0, the otg phy, is -not yet (fully) supported after this commit. - -Signed-off-by: Reinder de Haan -Signed-off-by: Hans de Goede -Acked-by: Rob Herring -Signed-off-by: Kishon Vijay Abraham I ---- - .../devicetree/bindings/phy/sun4i-usb-phy.txt | 1 + - drivers/phy/phy-sun4i-usb.c | 41 +++++++++++++++++----- - 2 files changed, 33 insertions(+), 9 deletions(-) - ---- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt -+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt -@@ -9,6 +9,7 @@ Required properties: - * allwinner,sun7i-a20-usb-phy - * allwinner,sun8i-a23-usb-phy - * allwinner,sun8i-a33-usb-phy -+ * allwinner,sun8i-h3-usb-phy - - reg : a list of offset + length pairs - - reg-names : - * "phy_ctrl" ---- a/drivers/phy/phy-sun4i-usb.c -+++ b/drivers/phy/phy-sun4i-usb.c -@@ -47,6 +47,9 @@ - #define REG_PHYBIST 0x08 - #define REG_PHYTUNE 0x0c - #define REG_PHYCTL_A33 0x10 -+#define REG_PHY_UNK_H3 0x20 -+ -+#define REG_PMU_UNK_H3 0x10 - - #define PHYCTL_DATA BIT(7) - -@@ -80,7 +83,7 @@ - #define PHY_DISCON_TH_SEL 0x2a - #define PHY_SQUELCH_DETECT 0x3c - --#define MAX_PHYS 3 -+#define MAX_PHYS 4 - - /* - * Note do not raise the debounce time, we must report Vusb high within 100ms -@@ -92,6 +95,7 @@ - enum sun4i_usb_phy_type { - sun4i_a10_phy, - sun8i_a33_phy, -+ sun8i_h3_phy, - }; - - struct sun4i_usb_phy_cfg { -@@ -239,6 +243,7 @@ static int sun4i_usb_phy_init(struct phy - struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); - struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); - int ret; -+ u32 val; - - ret = clk_prepare_enable(phy->clk); - if (ret) -@@ -250,16 +255,26 @@ static int sun4i_usb_phy_init(struct phy - return ret; - } - -- /* Enable USB 45 Ohm resistor calibration */ -- if (phy->index == 0) -- sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1); -- -- /* Adjust PHY's magnitude and rate */ -- sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5); -- -- /* Disconnect threshold adjustment */ -- sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, -- data->cfg->disc_thresh, 2); -+ if (data->cfg->type == sun8i_h3_phy) { -+ if (phy->index == 0) { -+ val = readl(data->base + REG_PHY_UNK_H3); -+ writel(val & ~1, data->base + REG_PHY_UNK_H3); -+ } -+ -+ val = readl(phy->pmu + REG_PMU_UNK_H3); -+ writel(val & ~2, phy->pmu + REG_PMU_UNK_H3); -+ } else { -+ /* Enable USB 45 Ohm resistor calibration */ -+ if (phy->index == 0) -+ sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1); -+ -+ /* Adjust PHY's magnitude and rate */ -+ sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5); -+ -+ /* Disconnect threshold adjustment */ -+ sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, -+ data->cfg->disc_thresh, 2); -+ } - - sun4i_usb_phy_passby(phy, 1); - -@@ -726,6 +741,13 @@ static const struct sun4i_usb_phy_cfg su - .dedicated_clocks = true, - }; - -+static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { -+ .num_phys = 4, -+ .type = sun8i_h3_phy, -+ .disc_thresh = 3, -+ .dedicated_clocks = true, -+}; -+ - static const struct of_device_id sun4i_usb_phy_of_match[] = { - { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg }, - { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg }, -@@ -733,6 +755,7 @@ static const struct of_device_id sun4i_u - { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg }, - { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg }, - { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg }, -+ { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg }, - { }, - }; - MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); diff --git a/target/linux/sunxi/patches-4.4/107-clk-sunxi-add-h3-usbphy-clocks.patch b/target/linux/sunxi/patches-4.4/107-clk-sunxi-add-h3-usbphy-clocks.patch deleted file mode 100644 index c845d512e4..0000000000 --- a/target/linux/sunxi/patches-4.4/107-clk-sunxi-add-h3-usbphy-clocks.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 7bec0200ac214b5cba44e2c2c4385815be4b9f00 Mon Sep 17 00:00:00 2001 -From: Reinder de Haan -Date: Sun, 15 Nov 2015 20:46:13 +0100 -Subject: [PATCH] clk: sunxi: Add support for the H3 usb phy clocks - -The H3 has a usb-phy clk register which is similar to that of earlier -SoCs, but with support for a larger number of phys. So we can simply add -a new set of clk-data and a new compatible and be done with it. - -Acked-by: Chen-Yu Tsai -Acked-by: Rob Herring -Signed-off-by: Reinder de Haan -Signed-off-by: Hans de Goede -Signed-off-by: Maxime Ripard ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 1 + - drivers/clk/sunxi/clk-usb.c | 12 ++++++++++++ - 2 files changed, 13 insertions(+) - ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -70,6 +70,7 @@ Required properties: - "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13 - "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31 - "allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23 -+ "allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3 - "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80 - "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80 - ---- a/drivers/clk/sunxi/clk-usb.c -+++ b/drivers/clk/sunxi/clk-usb.c -@@ -243,3 +243,15 @@ static void __init sun9i_a80_usb_phy_set - sunxi_usb_clk_setup(node, &sun9i_a80_usb_phy_data, &a80_usb_phy_lock); - } - CLK_OF_DECLARE(sun9i_a80_usb_phy, "allwinner,sun9i-a80-usb-phy-clk", sun9i_a80_usb_phy_setup); -+ -+static const struct usb_clk_data sun8i_h3_usb_clk_data __initconst = { -+ .clk_mask = BIT(19) | BIT(18) | BIT(17) | BIT(16) | -+ BIT(11) | BIT(10) | BIT(9) | BIT(8), -+ .reset_mask = BIT(3) | BIT(2) | BIT(1) | BIT(0), -+}; -+ -+static void __init sun8i_h3_usb_setup(struct device_node *node) -+{ -+ sunxi_usb_clk_setup(node, &sun8i_h3_usb_clk_data, &sun4i_a10_usb_lock); -+} -+CLK_OF_DECLARE(sun8i_h3_usb, "allwinner,sun8i-h3-usb-clk", sun8i_h3_usb_setup); diff --git a/target/linux/sunxi/patches-4.4/110-clk-sunxi-add-ve-for-sun457i.patch b/target/linux/sunxi/patches-4.4/110-clk-sunxi-add-ve-for-sun457i.patch deleted file mode 100644 index f929753d77..0000000000 --- a/target/linux/sunxi/patches-4.4/110-clk-sunxi-add-ve-for-sun457i.patch +++ /dev/null @@ -1,226 +0,0 @@ -From 3cdd9f5c4953465abb87ec757159cc0576ae6b0a Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Sat, 5 Dec 2015 21:16:43 +0800 -Subject: [PATCH] clk: sunxi: Add VE (Video Engine) module clock driver for - sun[457]i - -The video engine has its own special module clock, consisting of a clock -gate, configurable dividers, and a reset control. - -On later (sun[68]i) families, the reset control is moved out of this -piece of hardware and grouped with reset controls of other peripherals. - -Signed-off-by: Chen-Yu Tsai -Tested-by: Jens Kuske -Signed-off-by: Maxime Ripard ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 4 + - drivers/clk/sunxi/Makefile | 1 + - drivers/clk/sunxi/clk-a10-ve.c | 171 ++++++++++++++++++++++ - 3 files changed, 176 insertions(+) - create mode 100644 drivers/clk/sunxi/clk-a10-ve.c - ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -73,6 +73,7 @@ Required properties: - "allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3 - "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80 - "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80 -+ "allwinner,sun4i-a10-ve-clk" - for the Video Engine clock - - Required properties for all clocks: - - reg : shall be the control register address for the clock. -@@ -92,6 +93,9 @@ Required properties for all clocks: - And "allwinner,*-usb-clk" clocks also require: - - reset-cells : shall be set to 1 - -+The "allwinner,sun4i-a10-ve-clk" clock also requires: -+- reset-cells : shall be set to 0 -+ - The "allwinner,sun9i-a80-mmc-config-clk" clock also requires: - - #reset-cells : shall be set to 1 - - resets : shall be the reset control phandle for the mmc block. ---- a/drivers/clk/sunxi/Makefile -+++ b/drivers/clk/sunxi/Makefile -@@ -7,6 +7,7 @@ obj-y += clk-a10-codec.o - obj-y += clk-a10-hosc.o - obj-y += clk-a10-mod1.o - obj-y += clk-a10-pll2.o -+obj-y += clk-a10-ve.o - obj-y += clk-a20-gmac.o - obj-y += clk-mod0.o - obj-y += clk-simple-gates.o ---- /dev/null -+++ b/drivers/clk/sunxi/clk-a10-ve.c -@@ -0,0 +1,171 @@ -+/* -+ * Copyright 2015 Chen-Yu Tsai -+ * -+ * Chen-Yu Tsai -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static DEFINE_SPINLOCK(ve_lock); -+ -+#define SUN4I_VE_ENABLE 31 -+#define SUN4I_VE_DIVIDER_SHIFT 16 -+#define SUN4I_VE_DIVIDER_WIDTH 3 -+#define SUN4I_VE_RESET 0 -+ -+/** -+ * sunxi_ve_reset... - reset bit in ve clk registers handling -+ */ -+ -+struct ve_reset_data { -+ void __iomem *reg; -+ spinlock_t *lock; -+ struct reset_controller_dev rcdev; -+}; -+ -+static int sunxi_ve_reset_assert(struct reset_controller_dev *rcdev, -+ unsigned long id) -+{ -+ struct ve_reset_data *data = container_of(rcdev, -+ struct ve_reset_data, -+ rcdev); -+ unsigned long flags; -+ u32 reg; -+ -+ spin_lock_irqsave(data->lock, flags); -+ -+ reg = readl(data->reg); -+ writel(reg & ~BIT(SUN4I_VE_RESET), data->reg); -+ -+ spin_unlock_irqrestore(data->lock, flags); -+ -+ return 0; -+} -+ -+static int sunxi_ve_reset_deassert(struct reset_controller_dev *rcdev, -+ unsigned long id) -+{ -+ struct ve_reset_data *data = container_of(rcdev, -+ struct ve_reset_data, -+ rcdev); -+ unsigned long flags; -+ u32 reg; -+ -+ spin_lock_irqsave(data->lock, flags); -+ -+ reg = readl(data->reg); -+ writel(reg | BIT(SUN4I_VE_RESET), data->reg); -+ -+ spin_unlock_irqrestore(data->lock, flags); -+ -+ return 0; -+} -+ -+static int sunxi_ve_of_xlate(struct reset_controller_dev *rcdev, -+ const struct of_phandle_args *reset_spec) -+{ -+ if (WARN_ON(reset_spec->args_count != 0)) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+static struct reset_control_ops sunxi_ve_reset_ops = { -+ .assert = sunxi_ve_reset_assert, -+ .deassert = sunxi_ve_reset_deassert, -+}; -+ -+static void __init sun4i_ve_clk_setup(struct device_node *node) -+{ -+ struct clk *clk; -+ struct clk_divider *div; -+ struct clk_gate *gate; -+ struct ve_reset_data *reset_data; -+ const char *parent; -+ const char *clk_name = node->name; -+ void __iomem *reg; -+ int err; -+ -+ reg = of_io_request_and_map(node, 0, of_node_full_name(node)); -+ if (IS_ERR(reg)) -+ return; -+ -+ div = kzalloc(sizeof(*div), GFP_KERNEL); -+ if (!div) -+ goto err_unmap; -+ -+ gate = kzalloc(sizeof(*gate), GFP_KERNEL); -+ if (!gate) -+ goto err_free_div; -+ -+ of_property_read_string(node, "clock-output-names", &clk_name); -+ parent = of_clk_get_parent_name(node, 0); -+ -+ gate->reg = reg; -+ gate->bit_idx = SUN4I_VE_ENABLE; -+ gate->lock = &ve_lock; -+ -+ div->reg = reg; -+ div->shift = SUN4I_VE_DIVIDER_SHIFT; -+ div->width = SUN4I_VE_DIVIDER_WIDTH; -+ div->lock = &ve_lock; -+ -+ clk = clk_register_composite(NULL, clk_name, &parent, 1, -+ NULL, NULL, -+ &div->hw, &clk_divider_ops, -+ &gate->hw, &clk_gate_ops, -+ CLK_SET_RATE_PARENT); -+ if (IS_ERR(clk)) -+ goto err_free_gate; -+ -+ err = of_clk_add_provider(node, of_clk_src_simple_get, clk); -+ if (err) -+ goto err_unregister_clk; -+ -+ reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL); -+ if (!reset_data) -+ goto err_del_provider; -+ -+ reset_data->reg = reg; -+ reset_data->lock = &ve_lock; -+ reset_data->rcdev.nr_resets = 1; -+ reset_data->rcdev.ops = &sunxi_ve_reset_ops; -+ reset_data->rcdev.of_node = node; -+ reset_data->rcdev.of_xlate = sunxi_ve_of_xlate; -+ reset_data->rcdev.of_reset_n_cells = 0; -+ err = reset_controller_register(&reset_data->rcdev); -+ if (err) -+ goto err_free_reset; -+ -+ return; -+ -+err_free_reset: -+ kfree(reset_data); -+err_del_provider: -+ of_clk_del_provider(node); -+err_unregister_clk: -+ clk_unregister(clk); -+err_free_gate: -+ kfree(gate); -+err_free_div: -+ kfree(div); -+err_unmap: -+ iounmap(reg); -+} -+CLK_OF_DECLARE(sun4i_ve, "allwinner,sun4i-a10-ve-clk", -+ sun4i_ve_clk_setup); diff --git a/target/linux/sunxi/patches-4.4/111-1-dt-sun4i-add-ve-clock-module.patch b/target/linux/sunxi/patches-4.4/111-1-dt-sun4i-add-ve-clock-module.patch deleted file mode 100644 index cfcf9bfb40..0000000000 --- a/target/linux/sunxi/patches-4.4/111-1-dt-sun4i-add-ve-clock-module.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 1ccc4939220cf815c309feddcf82dba260499194 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Sat, 5 Dec 2015 21:16:45 +0800 -Subject: [PATCH] ARM: dts: sun4i: Add VE (Video Engine) module clock node - -The video engine has its own module clock, which also includes a -reset control for it. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -520,6 +520,15 @@ - "dram_de_mp", "dram_ace"; - }; - -+ ve_clk: clk@01c2013c { -+ #clock-cells = <0>; -+ #reset-cells = <0>; -+ compatible = "allwinner,sun4i-a10-ve-clk"; -+ reg = <0x01c2013c 0x4>; -+ clocks = <&pll4>; -+ clock-output-names = "ve"; -+ }; -+ - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; diff --git a/target/linux/sunxi/patches-4.4/111-2-dt-sun7i-add-ve-clock-module.patch b/target/linux/sunxi/patches-4.4/111-2-dt-sun7i-add-ve-clock-module.patch deleted file mode 100644 index 85d2d31615..0000000000 --- a/target/linux/sunxi/patches-4.4/111-2-dt-sun7i-add-ve-clock-module.patch +++ /dev/null @@ -1,32 +0,0 @@ -From f0571ab140723f9a898d4a404118580534dcc468 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Sat, 5 Dec 2015 21:16:47 +0800 -Subject: [PATCH] ARM: dts: sun7i: Add VE (Video Engine) module clock node - -The video engine has its own module clock, which also includes a -reset control for it. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -527,6 +527,15 @@ - "dram_de_mp", "dram_ace"; - }; - -+ ve_clk: clk@01c2013c { -+ #clock-cells = <0>; -+ #reset-cells = <0>; -+ compatible = "allwinner,sun4i-a10-ve-clk"; -+ reg = <0x01c2013c 0x4>; -+ clocks = <&pll4>; -+ clock-output-names = "ve"; -+ }; -+ - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; diff --git a/target/linux/sunxi/patches-4.4/115-musb-ignore-vbus-errors.patch b/target/linux/sunxi/patches-4.4/115-musb-ignore-vbus-errors.patch deleted file mode 100644 index 49c7162a6a..0000000000 --- a/target/linux/sunxi/patches-4.4/115-musb-ignore-vbus-errors.patch +++ /dev/null @@ -1,26 +0,0 @@ -From fce20ac5d8c98f1a8ea5298051d9fa669e455f04 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Tue, 4 Aug 2015 23:22:45 +0200 -Subject: [PATCH] musb: sunxi: Ignore VBus errors in host-only mode - -For some unclear reason sometimes we get VBus errors in host-only mode, -even though we do not have any vbus-detection then. Ignore these. - -Signed-off-by: Hans de Goede ---- - drivers/usb/musb/sunxi.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/usb/musb/sunxi.c -+++ b/drivers/usb/musb/sunxi.c -@@ -194,6 +194,10 @@ static irqreturn_t sunxi_musb_interrupt( - musb_writeb(musb->mregs, MUSB_FADDR, 0); - } - -+ /* Ignore Vbus errors when in host only mode */ -+ if (musb->port_mode == MUSB_PORT_MODE_HOST) -+ musb->int_usb &= ~MUSB_INTR_VBUSERROR; -+ - musb->int_tx = readw(musb->mregs + SUNXI_MUSB_INTRTX); - if (musb->int_tx) - writew(musb->int_tx, musb->mregs + SUNXI_MUSB_INTRTX); diff --git a/target/linux/sunxi/patches-4.4/130-pinctrl-sunxi-add-h3-pio.patch b/target/linux/sunxi/patches-4.4/130-pinctrl-sunxi-add-h3-pio.patch deleted file mode 100644 index 47dce12a9d..0000000000 --- a/target/linux/sunxi/patches-4.4/130-pinctrl-sunxi-add-h3-pio.patch +++ /dev/null @@ -1,568 +0,0 @@ -From 03b83828e452418c18ba506e3e02b5deadbb53fa Mon Sep 17 00:00:00 2001 -From: Jens Kuske -Date: Tue, 27 Oct 2015 17:50:23 +0100 -Subject: [PATCH] pinctrl: sunxi: Add H3 PIO controller support - -The H3 uses the same pin controller as previous SoC's from Allwinner. -Add support for the pins controlled by the main PIO controller. - -Signed-off-by: Jens Kuske -Acked-by: Maxime Ripard ---- - .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 + - drivers/pinctrl/sunxi/Kconfig | 4 + - drivers/pinctrl/sunxi/Makefile | 1 + - drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c | 516 +++++++++++++++++++++ - 4 files changed, 522 insertions(+) - create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c - ---- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt -+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt -@@ -18,6 +18,7 @@ Required properties: - "allwinner,sun8i-a23-r-pinctrl" - "allwinner,sun8i-a33-pinctrl" - "allwinner,sun8i-a83t-pinctrl" -+ "allwinner,sun8i-h3-pinctrl" - - - reg: Should contain the register physical address and length for the - pin controller. ---- a/drivers/pinctrl/sunxi/Kconfig -+++ b/drivers/pinctrl/sunxi/Kconfig -@@ -51,6 +51,10 @@ config PINCTRL_SUN8I_A23_R - depends on RESET_CONTROLLER - select PINCTRL_SUNXI_COMMON - -+config PINCTRL_SUN8I_H3 -+ def_bool MACH_SUN8I -+ select PINCTRL_SUNXI_COMMON -+ - config PINCTRL_SUN9I_A80 - def_bool MACH_SUN9I - select PINCTRL_SUNXI_COMMON ---- a/drivers/pinctrl/sunxi/Makefile -+++ b/drivers/pinctrl/sunxi/Makefile -@@ -13,4 +13,5 @@ obj-$(CONFIG_PINCTRL_SUN8I_A23) += pinc - obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o - obj-$(CONFIG_PINCTRL_SUN8I_A33) += pinctrl-sun8i-a33.o - obj-$(CONFIG_PINCTRL_SUN8I_A83T) += pinctrl-sun8i-a83t.o -+obj-$(CONFIG_PINCTRL_SUN8I_H3) += pinctrl-sun8i-h3.o - obj-$(CONFIG_PINCTRL_SUN9I_A80) += pinctrl-sun9i-a80.o ---- /dev/null -+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c -@@ -0,0 +1,516 @@ -+/* -+ * Allwinner H3 SoCs pinctrl driver. -+ * -+ * Copyright (C) 2015 Jens Kuske -+ * -+ * Based on pinctrl-sun8i-a23.c, which is: -+ * Copyright (C) 2014 Chen-Yu Tsai -+ * Copyright (C) 2014 Maxime Ripard -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "pinctrl-sunxi.h" -+ -+static const struct sunxi_desc_pin sun8i_h3_pins[] = { -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 0), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "uart2"), /* TX */ -+ SUNXI_FUNCTION(0x3, "jtag"), /* MS */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PA_EINT0 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 1), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "uart2"), /* RX */ -+ SUNXI_FUNCTION(0x3, "jtag"), /* CK */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)), /* PA_EINT1 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 2), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "uart2"), /* RTS */ -+ SUNXI_FUNCTION(0x3, "jtag"), /* DO */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)), /* PA_EINT2 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 3), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "uart2"), /* CTS */ -+ SUNXI_FUNCTION(0x3, "jtag"), /* DI */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)), /* PA_EINT3 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 4), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "uart0"), /* TX */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)), /* PA_EINT4 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 5), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "uart0"), /* RX */ -+ SUNXI_FUNCTION(0x3, "pwm0"), -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)), /* PA_EINT5 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 6), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "sim"), /* PWREN */ -+ SUNXI_FUNCTION(0x3, "pwm1"), -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)), /* PA_EINT6 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 7), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "sim"), /* CLK */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)), /* PA_EINT7 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 8), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "sim"), /* DATA */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)), /* PA_EINT8 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 9), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "sim"), /* RST */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)), /* PA_EINT9 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 10), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "sim"), /* DET */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 10)), /* PA_EINT10 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 11), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "i2c0"), /* SCK */ -+ SUNXI_FUNCTION(0x3, "di"), /* TX */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 11)), /* PA_EINT11 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 12), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "i2c0"), /* SDA */ -+ SUNXI_FUNCTION(0x3, "di"), /* RX */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 12)), /* PA_EINT12 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 13), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "spi1"), /* CS */ -+ SUNXI_FUNCTION(0x3, "uart3"), /* TX */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 13)), /* PA_EINT13 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 14), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "spi1"), /* CLK */ -+ SUNXI_FUNCTION(0x3, "uart3"), /* RX */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 14)), /* PA_EINT14 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 15), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "spi1"), /* MOSI */ -+ SUNXI_FUNCTION(0x3, "uart3"), /* RTS */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 15)), /* PA_EINT15 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 16), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "spi1"), /* MISO */ -+ SUNXI_FUNCTION(0x3, "uart3"), /* CTS */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 16)), /* PA_EINT16 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 17), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "spdif"), /* OUT */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 17)), /* PA_EINT17 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 18), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "i2s0"), /* SYNC */ -+ SUNXI_FUNCTION(0x3, "i2c1"), /* SCK */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 18)), /* PA_EINT18 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 19), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "i2s0"), /* CLK */ -+ SUNXI_FUNCTION(0x3, "i2c1"), /* SDA */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 19)), /* PA_EINT19 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 20), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "i2s0"), /* DOUT */ -+ SUNXI_FUNCTION(0x3, "sim"), /* VPPEN */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 20)), /* PA_EINT20 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 21), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "i2s0"), /* DIN */ -+ SUNXI_FUNCTION(0x3, "sim"), /* VPPPP */ -+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 21)), /* PA_EINT21 */ -+ /* Hole */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 0), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0"), /* WE */ -+ SUNXI_FUNCTION(0x3, "spi0")), /* MOSI */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 1), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0"), /* ALE */ -+ SUNXI_FUNCTION(0x3, "spi0")), /* MISO */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 2), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0"), /* CLE */ -+ SUNXI_FUNCTION(0x3, "spi0")), /* CLK */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 3), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0"), /* CE1 */ -+ SUNXI_FUNCTION(0x3, "spi0")), /* CS */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 4), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0")), /* CE0 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 5), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0"), /* RE */ -+ SUNXI_FUNCTION(0x3, "mmc2")), /* CLK */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 6), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0"), /* RB0 */ -+ SUNXI_FUNCTION(0x3, "mmc2")), /* CMD */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 7), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0")), /* RB1 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 8), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ0 */ -+ SUNXI_FUNCTION(0x3, "mmc2")), /* D0 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 9), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ1 */ -+ SUNXI_FUNCTION(0x3, "mmc2")), /* D1 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 10), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ2 */ -+ SUNXI_FUNCTION(0x3, "mmc2")), /* D2 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 11), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ3 */ -+ SUNXI_FUNCTION(0x3, "mmc2")), /* D3 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 12), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ4 */ -+ SUNXI_FUNCTION(0x3, "mmc2")), /* D4 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 13), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand0"), /* DQ5 */ -+ SUNXI_FUNCTION(0x3, "mmc2")), /* D5 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 14), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand"), /* DQ6 */ -+ SUNXI_FUNCTION(0x3, "mmc2")), /* D6 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 15), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand"), /* DQ7 */ -+ SUNXI_FUNCTION(0x3, "mmc2")), /* D7 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 16), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "nand"), /* DQS */ -+ SUNXI_FUNCTION(0x3, "mmc2")), /* RST */ -+ /* Hole */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 0), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* RXD3 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 1), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* RXD2 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 2), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* RXD1 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 3), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* RXD0 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 4), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* RXCK */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 5), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* RXCTL/RCDV */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 6), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* RXERR */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 7), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* TXD3 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 8), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* TXD2L */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 9), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* TXD1 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 10), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* TXD0 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 11), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* CRS */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 12), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* TXCK */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 13), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* TXCTL/TXEN */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 14), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* TXERR */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 15), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* CLKIN/COL */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 16), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* MDC */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(D, 17), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "emac")), /* MDIO */ -+ /* Hole */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 0), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* PCLK */ -+ SUNXI_FUNCTION(0x3, "ts")), /* CLK */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 1), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* MCLK */ -+ SUNXI_FUNCTION(0x3, "ts")), /* ERR */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 2), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* HSYNC */ -+ SUNXI_FUNCTION(0x3, "ts")), /* SYNC */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 3), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* VSYNC */ -+ SUNXI_FUNCTION(0x3, "ts")), /* DVLD */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 4), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* D0 */ -+ SUNXI_FUNCTION(0x3, "ts")), /* D0 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 5), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* D1 */ -+ SUNXI_FUNCTION(0x3, "ts")), /* D1 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 6), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* D2 */ -+ SUNXI_FUNCTION(0x3, "ts")), /* D2 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 7), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* D3 */ -+ SUNXI_FUNCTION(0x3, "ts")), /* D3 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 8), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* D4 */ -+ SUNXI_FUNCTION(0x3, "ts")), /* D4 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 9), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* D5 */ -+ SUNXI_FUNCTION(0x3, "ts")), /* D5 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 10), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* D6 */ -+ SUNXI_FUNCTION(0x3, "ts")), /* D6 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 11), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* D7 */ -+ SUNXI_FUNCTION(0x3, "ts")), /* D7 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 12), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* SCK */ -+ SUNXI_FUNCTION(0x3, "i2c2")), /* SCK */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 13), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "csi"), /* SDA */ -+ SUNXI_FUNCTION(0x3, "i2c2")), /* SDA */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 14), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out")), -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 15), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out")), -+ /* Hole */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 0), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "mmc0"), /* D1 */ -+ SUNXI_FUNCTION(0x3, "jtag")), /* MS */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 1), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "mmc0"), /* D0 */ -+ SUNXI_FUNCTION(0x3, "jtag")), /* DI */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 2), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "mmc0"), /* CLK */ -+ SUNXI_FUNCTION(0x3, "uart0")), /* TX */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 3), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "mmc0"), /* CMD */ -+ SUNXI_FUNCTION(0x3, "jtag")), /* DO */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 4), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "mmc0"), /* D3 */ -+ SUNXI_FUNCTION(0x3, "uart0")), /* RX */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 5), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "mmc0"), /* D2 */ -+ SUNXI_FUNCTION(0x3, "jtag")), /* CK */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 6), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "mmc0")), /* DET */ -+ /* Hole */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 0), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "mmc1"), /* CLK */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 0)), /* PG_EINT0 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 1), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "mmc1"), /* CMD */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 1)), /* PG_EINT1 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 2), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "mmc1"), /* D0 */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 2)), /* PG_EINT2 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 3), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "mmc1"), /* D1 */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 3)), /* PG_EINT3 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 4), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "mmc1"), /* D2 */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 4)), /* PG_EINT4 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 5), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "mmc1"), /* D3 */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 5)), /* PG_EINT5 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 6), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "uart1"), /* TX */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 6)), /* PG_EINT6 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 7), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "uart1"), /* RX */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 7)), /* PG_EINT7 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 8), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "uart1"), /* RTS */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 8)), /* PG_EINT8 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 9), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "uart1"), /* CTS */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 9)), /* PG_EINT9 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 10), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "i2s1"), /* SYNC */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 10)), /* PG_EINT10 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 11), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "i2s1"), /* CLK */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 11)), /* PG_EINT11 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 12), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "i2s1"), /* DOUT */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 12)), /* PG_EINT12 */ -+ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 13), -+ SUNXI_FUNCTION(0x0, "gpio_in"), -+ SUNXI_FUNCTION(0x1, "gpio_out"), -+ SUNXI_FUNCTION(0x2, "i2s1"), /* DIN */ -+ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 13)), /* PG_EINT13 */ -+}; -+ -+static const struct sunxi_pinctrl_desc sun8i_h3_pinctrl_data = { -+ .pins = sun8i_h3_pins, -+ .npins = ARRAY_SIZE(sun8i_h3_pins), -+ .irq_banks = 2, -+}; -+ -+static int sun8i_h3_pinctrl_probe(struct platform_device *pdev) -+{ -+ return sunxi_pinctrl_init(pdev, -+ &sun8i_h3_pinctrl_data); -+} -+ -+static const struct of_device_id sun8i_h3_pinctrl_match[] = { -+ { .compatible = "allwinner,sun8i-h3-pinctrl", }, -+ {} -+}; -+ -+static struct platform_driver sun8i_h3_pinctrl_driver = { -+ .probe = sun8i_h3_pinctrl_probe, -+ .driver = { -+ .name = "sun8i-h3-pinctrl", -+ .of_match_table = sun8i_h3_pinctrl_match, -+ }, -+}; -+builtin_platform_driver(sun8i_h3_pinctrl_driver); diff --git a/target/linux/sunxi/patches-4.4/131-reset-add-h3-resets.patch b/target/linux/sunxi/patches-4.4/131-reset-add-h3-resets.patch deleted file mode 100644 index f8e599fbe3..0000000000 --- a/target/linux/sunxi/patches-4.4/131-reset-add-h3-resets.patch +++ /dev/null @@ -1,92 +0,0 @@ -From 5f0bb9d0bc545ef53a83f7bd176fdc0736eed8e5 Mon Sep 17 00:00:00 2001 -From: Jens Kuske -Date: Tue, 27 Oct 2015 17:50:24 +0100 -Subject: [PATCH] reset: sunxi: Add Allwinner H3 bus resets - -The H3 bus resets have some holes between the registers, so we add -an of_xlate() function to skip them according to the datasheet. - -Signed-off-by: Jens Kuske ---- - .../bindings/reset/allwinner,sunxi-clock-reset.txt | 1 + - drivers/reset/reset-sunxi.c | 30 +++++++++++++++++++--- - 2 files changed, 28 insertions(+), 3 deletions(-) - ---- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt -+++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt -@@ -8,6 +8,7 @@ Required properties: - - compatible: Should be one of the following: - "allwinner,sun6i-a31-ahb1-reset" - "allwinner,sun6i-a31-clock-reset" -+ "allwinner,sun8i-h3-bus-reset" - - reg: should be register base and length as documented in the - datasheet - - #reset-cells: 1, see below ---- a/drivers/reset/reset-sunxi.c -+++ b/drivers/reset/reset-sunxi.c -@@ -75,7 +75,9 @@ static struct reset_control_ops sunxi_re - .deassert = sunxi_reset_deassert, - }; - --static int sunxi_reset_init(struct device_node *np) -+static int sunxi_reset_init(struct device_node *np, -+ int (*of_xlate)(struct reset_controller_dev *rcdev, -+ const struct of_phandle_args *reset_spec)) - { - struct sunxi_reset_data *data; - struct resource res; -@@ -108,6 +110,7 @@ static int sunxi_reset_init(struct devic - data->rcdev.nr_resets = size * 32; - data->rcdev.ops = &sunxi_reset_ops; - data->rcdev.of_node = np; -+ data->rcdev.of_xlate = of_xlate; - reset_controller_register(&data->rcdev); - - return 0; -@@ -117,6 +120,21 @@ err_alloc: - return ret; - }; - -+static int sun8i_h3_bus_reset_xlate(struct reset_controller_dev *rcdev, -+ const struct of_phandle_args *reset_spec) -+{ -+ unsigned int index = reset_spec->args[0]; -+ -+ if (index < 96) -+ return index; -+ else if (index < 128) -+ return index + 32; -+ else if (index < 160) -+ return index + 64; -+ else -+ return -EINVAL; -+} -+ - /* - * These are the reset controller we need to initialize early on in - * our system, before we can even think of using a regular device -@@ -124,15 +142,21 @@ err_alloc: - */ - static const struct of_device_id sunxi_early_reset_dt_ids[] __initdata = { - { .compatible = "allwinner,sun6i-a31-ahb1-reset", }, -+ { .compatible = "allwinner,sun8i-h3-bus-reset", .data = sun8i_h3_bus_reset_xlate, }, - { /* sentinel */ }, - }; - - void __init sun6i_reset_init(void) - { - struct device_node *np; -- -- for_each_matching_node(np, sunxi_early_reset_dt_ids) -- sunxi_reset_init(np); -+ const struct of_device_id *match; -+ int (*of_xlate)(struct reset_controller_dev *rcdev, -+ const struct of_phandle_args *reset_spec); -+ -+ for_each_matching_node_and_match(np, sunxi_early_reset_dt_ids, &match) { -+ of_xlate = match->data; -+ sunxi_reset_init(np, of_xlate); -+ } - } - - /* diff --git a/target/linux/sunxi/patches-4.4/132-dt-sun8i-add-h3-usbclocks.patch b/target/linux/sunxi/patches-4.4/132-dt-sun8i-add-h3-usbclocks.patch deleted file mode 100644 index 13d44e4468..0000000000 --- a/target/linux/sunxi/patches-4.4/132-dt-sun8i-add-h3-usbclocks.patch +++ /dev/null @@ -1,34 +0,0 @@ -From d6a71e3caae07fb2d98e93ee62477273abaceb27 Mon Sep 17 00:00:00 2001 -From: Reinder de Haan -Date: Tue, 3 Nov 2015 15:13:00 +0100 -Subject: [PATCH] ARM: dts: sun8i: Add support for H3 usb clocks - -Add a node describing the usb-clks found on the H3. - -Signed-off-by: Reinder de Haan -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun8i-h3.dtsi | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/arch/arm/boot/dts/sun8i-h3.dtsi -+++ b/arch/arm/boot/dts/sun8i-h3.dtsi -@@ -269,6 +269,18 @@ - "mmc2_sample"; - }; - -+ usb_clk: clk@01c200cc { -+ #clock-cells = <1>; -+ #reset-cells = <1>; -+ compatible = "allwinner,sun8i-h3-usb-clk"; -+ reg = <0x01c200cc 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "usb_phy0", "usb_phy1", -+ "usb_phy2", "usb_phy3", -+ "usb_ohci0", "usb_ohci1", -+ "usb_ohci2", "usb_ohci3"; -+ }; -+ - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-mbus-clk"; diff --git a/target/linux/sunxi/patches-4.4/133-dt-sun8i-add-usbphy-usbhost-ctrl-nodes.patch b/target/linux/sunxi/patches-4.4/133-dt-sun8i-add-usbphy-usbhost-ctrl-nodes.patch deleted file mode 100644 index 78dcaa9fec..0000000000 --- a/target/linux/sunxi/patches-4.4/133-dt-sun8i-add-usbphy-usbhost-ctrl-nodes.patch +++ /dev/null @@ -1,123 +0,0 @@ -From 5971a2f283d21eab36d7de24d35301f081f83418 Mon Sep 17 00:00:00 2001 -From: Reinder de Haan -Date: Tue, 3 Nov 2015 15:14:20 +0100 -Subject: [PATCH] ARM: dts: sun8i: Add usbphy and usb host controller nodes - -Add nodes describing the H3's usbphy and usb host controller nodes. - -Signed-off-by: Reinder de Haan -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun8i-h3.dtsi | 101 ++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 101 insertions(+) - ---- a/arch/arm/boot/dts/sun8i-h3.dtsi -+++ b/arch/arm/boot/dts/sun8i-h3.dtsi -@@ -362,6 +362,107 @@ - #size-cells = <0>; - }; - -+ usbphy: phy@01c19400 { -+ compatible = "allwinner,sun8i-h3-usb-phy"; -+ reg = <0x01c19400 0x2c>, -+ <0x01c1a800 0x4>, -+ <0x01c1b800 0x4>, -+ <0x01c1c800 0x4>, -+ <0x01c1d800 0x4>; -+ reg-names = "phy_ctrl", -+ "pmu0", -+ "pmu1", -+ "pmu2", -+ "pmu3"; -+ clocks = <&usb_clk 8>, -+ <&usb_clk 9>, -+ <&usb_clk 10>, -+ <&usb_clk 11>; -+ clock-names = "usb0_phy", -+ "usb1_phy", -+ "usb2_phy", -+ "usb3_phy"; -+ resets = <&usb_clk 0>, -+ <&usb_clk 1>, -+ <&usb_clk 2>, -+ <&usb_clk 3>; -+ reset-names = "usb0_reset", -+ "usb1_reset", -+ "usb2_reset", -+ "usb3_reset"; -+ status = "disabled"; -+ #phy-cells = <1>; -+ }; -+ -+ ehci1: usb@01c1b000 { -+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; -+ reg = <0x01c1b000 0x100>; -+ interrupts = ; -+ clocks = <&bus_gates 25>, <&bus_gates 29>; -+ resets = <&ahb_rst 25>, <&ahb_rst 29>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ohci1: usb@01c1b400 { -+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; -+ reg = <0x01c1b400 0x100>; -+ interrupts = ; -+ clocks = <&bus_gates 29>, <&bus_gates 25>, -+ <&usb_clk 17>; -+ resets = <&ahb_rst 29>, <&ahb_rst 25>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ehci2: usb@01c1c000 { -+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; -+ reg = <0x01c1c000 0x100>; -+ interrupts = ; -+ clocks = <&bus_gates 26>, <&bus_gates 30>; -+ resets = <&ahb_rst 26>, <&ahb_rst 30>; -+ phys = <&usbphy 2>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ohci2: usb@01c1c400 { -+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; -+ reg = <0x01c1c400 0x100>; -+ interrupts = ; -+ clocks = <&bus_gates 30>, <&bus_gates 26>, -+ <&usb_clk 18>; -+ resets = <&ahb_rst 30>, <&ahb_rst 26>; -+ phys = <&usbphy 2>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ehci3: usb@01c1d000 { -+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; -+ reg = <0x01c1d000 0x100>; -+ interrupts = ; -+ clocks = <&bus_gates 27>, <&bus_gates 31>; -+ resets = <&ahb_rst 27>, <&ahb_rst 31>; -+ phys = <&usbphy 3>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ohci3: usb@01c1d400 { -+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; -+ reg = <0x01c1d400 0x100>; -+ interrupts = ; -+ clocks = <&bus_gates 31>, <&bus_gates 27>, -+ <&usb_clk 19>; -+ resets = <&ahb_rst 31>, <&ahb_rst 27>; -+ phys = <&usbphy 3>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ - pio: pinctrl@01c20800 { - compatible = "allwinner,sun8i-h3-pinctrl"; - reg = <0x01c20800 0x400>; diff --git a/target/linux/sunxi/patches-4.4/134-dt-sun8i-orangepiplus-enable-usbhost.patch b/target/linux/sunxi/patches-4.4/134-dt-sun8i-orangepiplus-enable-usbhost.patch deleted file mode 100644 index 733639225c..0000000000 --- a/target/linux/sunxi/patches-4.4/134-dt-sun8i-orangepiplus-enable-usbhost.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 37e04fd781d3fc6d08116d38d34ec8124d916441 Mon Sep 17 00:00:00 2001 -From: Jens Kuske -Date: Tue, 17 Nov 2015 17:12:07 +0100 -Subject: [PATCH] ARM: dts: sun8i-h3-orangepi-plus: Enable USB host controllers - -Enable the 2 USB host controllers used on the Orange Pi Plus -and add the necessary regulators. - -Signed-off-by: Reinder de Haan -Signed-off-by: Hans de Goede -Signed-off-by: Jens Kuske ---- - arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 44 ++++++++++++++++++++++++++++ - 1 file changed, 44 insertions(+) - ---- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts -+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts -@@ -58,6 +58,35 @@ - chosen { - stdout-path = "serial0:115200n8"; - }; -+ -+ reg_usb3_vbus: usb3-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb3_vbus_pin_a>; -+ regulator-name = "usb3-vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-boot-on; -+ enable-active-high; -+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; -+ }; -+}; -+ -+&ehci1 { -+ status = "okay"; -+}; -+ -+&ehci3 { -+ status = "okay"; -+}; -+ -+&pio { -+ usb3_vbus_pin_a: usb3_vbus_pin@0 { -+ allwinner,pins = "PG11"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; - }; - - &mmc0 { -@@ -70,8 +99,23 @@ - status = "okay"; - }; - -+®_usb1_vbus { -+ gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; -+ status = "okay"; -+}; -+ - &uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; -+ -+&usb1_vbus_pin_a { -+ allwinner,pins = "PG13"; -+}; -+ -+&usbphy { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb3_vbus-supply = <®_usb3_vbus>; -+ status = "okay"; -+}; diff --git a/target/linux/sunxi/patches-4.4/135-clk-sunxi-fix-signedness-bug.patch b/target/linux/sunxi/patches-4.4/135-clk-sunxi-fix-signedness-bug.patch deleted file mode 100644 index a4b2af9e5a..0000000000 --- a/target/linux/sunxi/patches-4.4/135-clk-sunxi-fix-signedness-bug.patch +++ /dev/null @@ -1,25 +0,0 @@ -From b1558f168f4ef5956913d73fe330c4da85c74349 Mon Sep 17 00:00:00 2001 -From: Dan Carpenter -Date: Sat, 12 Dec 2015 15:43:46 +0300 -Subject: [PATCH] clk: sunxi: signedness bug in sun8i_h3_bus_gates_init() - -"index" needs to be signed for the error handling to work. - -Fixes: ab6e23a4e388 ('clk: sunxi: Add H3 clocks support') -Signed-off-by: Dan Carpenter -Signed-off-by: Maxime Ripard ---- - drivers/clk/sunxi/clk-sun8i-bus-gates.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clk/sunxi/clk-sun8i-bus-gates.c -+++ b/drivers/clk/sunxi/clk-sun8i-bus-gates.c -@@ -40,7 +40,7 @@ static void __init sun8i_h3_bus_gates_in - const __be32 *p; - int number, i; - u8 clk_bit; -- u32 index; -+ int index; - - reg = of_io_request_and_map(node, 0, of_node_full_name(node)); - if (IS_ERR(reg)) diff --git a/target/linux/sunxi/patches-4.4/140-reset-add-of_reset_control_get_by_index.patch b/target/linux/sunxi/patches-4.4/140-reset-add-of_reset_control_get_by_index.patch deleted file mode 100644 index c7e0e2bf64..0000000000 --- a/target/linux/sunxi/patches-4.4/140-reset-add-of_reset_control_get_by_index.patch +++ /dev/null @@ -1,109 +0,0 @@ -From b4faa163a7ebae9faab5d0aefe70143e3379178b Mon Sep 17 00:00:00 2001 -From: Vince Hsu -Date: Mon, 13 Jul 2015 13:39:39 +0100 -Subject: [PATCH] reset: add of_reset_control_get_by_index() - -Add of_reset_control_get_by_index() to allow the drivers to get reset -device without knowing its name. - -Signed-off-by: Vince Hsu -[jonathanh@nvidia.com: Updated stub function to return -ENOTSUPP instead - of -ENOSYS which should only be used for system calls.] -Signed-off-by: Jon Hunter -Signed-off-by: Philipp Zabel ---- - drivers/reset/core.c | 40 +++++++++++++++++++++++++++++----------- - include/linux/reset.h | 9 +++++++++ - 2 files changed, 38 insertions(+), 11 deletions(-) - ---- a/drivers/reset/core.c -+++ b/drivers/reset/core.c -@@ -141,27 +141,24 @@ int reset_control_status(struct reset_co - EXPORT_SYMBOL_GPL(reset_control_status); - - /** -- * of_reset_control_get - Lookup and obtain a reference to a reset controller. -+ * of_reset_control_get_by_index - Lookup and obtain a reference to a reset -+ * controller by index. - * @node: device to be reset by the controller -- * @id: reset line name -- * -- * Returns a struct reset_control or IS_ERR() condition containing errno. -+ * @index: index of the reset controller - * -- * Use of id names is optional. -+ * This is to be used to perform a list of resets for a device or power domain -+ * in whatever order. Returns a struct reset_control or IS_ERR() condition -+ * containing errno. - */ --struct reset_control *of_reset_control_get(struct device_node *node, -- const char *id) -+struct reset_control *of_reset_control_get_by_index(struct device_node *node, -+ int index) - { - struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER); - struct reset_controller_dev *r, *rcdev; - struct of_phandle_args args; -- int index = 0; - int rstc_id; - int ret; - -- if (id) -- index = of_property_match_string(node, -- "reset-names", id); - ret = of_parse_phandle_with_args(node, "resets", "#reset-cells", - index, &args); - if (ret) -@@ -202,6 +199,27 @@ struct reset_control *of_reset_control_g - - return rstc; - } -+EXPORT_SYMBOL_GPL(of_reset_control_get_by_index); -+ -+/** -+ * of_reset_control_get - Lookup and obtain a reference to a reset controller. -+ * @node: device to be reset by the controller -+ * @id: reset line name -+ * -+ * Returns a struct reset_control or IS_ERR() condition containing errno. -+ * -+ * Use of id names is optional. -+ */ -+struct reset_control *of_reset_control_get(struct device_node *node, -+ const char *id) -+{ -+ int index = 0; -+ -+ if (id) -+ index = of_property_match_string(node, -+ "reset-names", id); -+ return of_reset_control_get_by_index(node, index); -+} - EXPORT_SYMBOL_GPL(of_reset_control_get); - - /** ---- a/include/linux/reset.h -+++ b/include/linux/reset.h -@@ -38,6 +38,9 @@ static inline struct reset_control *devm - struct reset_control *of_reset_control_get(struct device_node *node, - const char *id); - -+struct reset_control *of_reset_control_get_by_index( -+ struct device_node *node, int index); -+ - #else - - static inline int reset_control_reset(struct reset_control *rstc) -@@ -106,6 +109,12 @@ static inline struct reset_control *of_r - return ERR_PTR(-ENOSYS); - } - -+static inline struct reset_control *of_reset_control_get_by_index( -+ struct device_node *node, int index) -+{ -+ return ERR_PTR(-ENOTSUPP); -+} -+ - #endif /* CONFIG_RESET_CONTROLLER */ - - #endif diff --git a/target/linux/sunxi/patches-4.4/141-reset-fix-of_reset_control_get.patch b/target/linux/sunxi/patches-4.4/141-reset-fix-of_reset_control_get.patch deleted file mode 100644 index eeab4972ba..0000000000 --- a/target/linux/sunxi/patches-4.4/141-reset-fix-of_reset_control_get.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 7fd7a26b60090a7df15f30ba10b0d39cbbd6a94e Mon Sep 17 00:00:00 2001 -From: Alban Bedel -Date: Tue, 1 Sep 2015 17:28:31 +0200 -Subject: [PATCH] reset: Fix of_reset_control_get() for consistent return - values - -When of_reset_control_get() is called without connection ID it returns --ENOENT when the 'resets' property doesn't exists or is an empty entry. -However when a connection ID is given it returns -EINVAL when the 'resets' -property doesn't exists or the requested name can't be found. This is -because the error code returned by of_property_match_string() is just -passed down as an index to of_parse_phandle_with_args(), which then -returns -EINVAL. - -To get a consistent return value with both code paths we must return --ENOENT when of_property_match_string() fails. - -Signed-off-by: Alban Bedel -Signed-off-by: Philipp Zabel ---- - drivers/reset/core.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/reset/core.c -+++ b/drivers/reset/core.c -@@ -215,9 +215,12 @@ struct reset_control *of_reset_control_g - { - int index = 0; - -- if (id) -+ if (id) { - index = of_property_match_string(node, - "reset-names", id); -+ if (index < 0) -+ return ERR_PTR(-ENOENT); -+ } - return of_reset_control_get_by_index(node, index); - } - EXPORT_SYMBOL_GPL(of_reset_control_get); diff --git a/target/linux/sunxi/patches-4.4/142-reset-use-ENOTSUPP-instead-of-ENOSYS.patch b/target/linux/sunxi/patches-4.4/142-reset-use-ENOTSUPP-instead-of-ENOSYS.patch deleted file mode 100644 index 665b15b00a..0000000000 --- a/target/linux/sunxi/patches-4.4/142-reset-use-ENOTSUPP-instead-of-ENOSYS.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 5a819175b911ce33f3337e1e069d4bcea1ec4788 Mon Sep 17 00:00:00 2001 -From: Philipp Zabel -Date: Thu, 29 Oct 2015 09:55:00 +0100 -Subject: [PATCH] reset: use ENOTSUPP instead of ENOSYS - -ENOSYS is reserved to report invalid syscalls to userspace. -Consistently return ENOTSUPP to indicate that the driver doesn't support -the functionality or the reset framework is not enabled at all. - -Signed-off-by: Philipp Zabel ---- - drivers/reset/core.c | 8 ++++---- - include/linux/reset.h | 8 ++++---- - 2 files changed, 8 insertions(+), 8 deletions(-) - ---- a/drivers/reset/core.c -+++ b/drivers/reset/core.c -@@ -95,7 +95,7 @@ int reset_control_reset(struct reset_con - if (rstc->rcdev->ops->reset) - return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id); - -- return -ENOSYS; -+ return -ENOTSUPP; - } - EXPORT_SYMBOL_GPL(reset_control_reset); - -@@ -108,7 +108,7 @@ int reset_control_assert(struct reset_co - if (rstc->rcdev->ops->assert) - return rstc->rcdev->ops->assert(rstc->rcdev, rstc->id); - -- return -ENOSYS; -+ return -ENOTSUPP; - } - EXPORT_SYMBOL_GPL(reset_control_assert); - -@@ -121,7 +121,7 @@ int reset_control_deassert(struct reset_ - if (rstc->rcdev->ops->deassert) - return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->id); - -- return -ENOSYS; -+ return -ENOTSUPP; - } - EXPORT_SYMBOL_GPL(reset_control_deassert); - -@@ -136,7 +136,7 @@ int reset_control_status(struct reset_co - if (rstc->rcdev->ops->status) - return rstc->rcdev->ops->status(rstc->rcdev, rstc->id); - -- return -ENOSYS; -+ return -ENOTSUPP; - } - EXPORT_SYMBOL_GPL(reset_control_status); - ---- a/include/linux/reset.h -+++ b/include/linux/reset.h -@@ -74,7 +74,7 @@ static inline void reset_control_put(str - - static inline int device_reset_optional(struct device *dev) - { -- return -ENOSYS; -+ return -ENOTSUPP; - } - - static inline struct reset_control *__must_check reset_control_get( -@@ -94,19 +94,19 @@ static inline struct reset_control *__mu - static inline struct reset_control *reset_control_get_optional( - struct device *dev, const char *id) - { -- return ERR_PTR(-ENOSYS); -+ return ERR_PTR(-ENOTSUPP); - } - - static inline struct reset_control *devm_reset_control_get_optional( - struct device *dev, const char *id) - { -- return ERR_PTR(-ENOSYS); -+ return ERR_PTR(-ENOTSUPP); - } - - static inline struct reset_control *of_reset_control_get( - struct device_node *node, const char *id) - { -- return ERR_PTR(-ENOSYS); -+ return ERR_PTR(-ENOTSUPP); - } - - static inline struct reset_control *of_reset_control_get_by_index( diff --git a/target/linux/sunxi/patches-4.4/143-reset-add-shared-resetcontrol-asserts.patch b/target/linux/sunxi/patches-4.4/143-reset-add-shared-resetcontrol-asserts.patch deleted file mode 100644 index e1078e9696..0000000000 --- a/target/linux/sunxi/patches-4.4/143-reset-add-shared-resetcontrol-asserts.patch +++ /dev/null @@ -1,265 +0,0 @@ -From d25cfe9b4f9663216ce4e011e3f1e7fa669ab58a Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Fri, 27 Nov 2015 21:09:05 +0100 -Subject: [PATCH] reset: Add shared reset_control_[de]assert variants - -Add reset_control_deassert_shared / reset_control_assert_shared -functions which are intended for use by drivers for hw blocks which -(may) share a reset line with another driver / hw block. - -Unlike the regular reset_control_[de]assert functions these functions -keep track of how often deassert_shared / assert_shared have been called -and keep the line deasserted as long as deassert has been called more -times than assert. - -Signed-off-by: Hans de Goede ---- -Changes in v2: --This is a new patch in v2 of this patch-set ---- - drivers/reset/core.c | 121 ++++++++++++++++++++++++++++++++++++--- - include/linux/reset-controller.h | 2 + - include/linux/reset.h | 2 + - 3 files changed, 116 insertions(+), 9 deletions(-) - ---- a/drivers/reset/core.c -+++ b/drivers/reset/core.c -@@ -22,16 +22,29 @@ static DEFINE_MUTEX(reset_controller_lis - static LIST_HEAD(reset_controller_list); - - /** -+ * struct reset_line - a reset line -+ * @list: list entry for the reset controllers reset line list -+ * @id: ID of the reset line in the reset controller device -+ * @refcnt: Number of reset_control structs referencing this device -+ * @deassert_cnt: Number of times this reset line has been deasserted -+ */ -+struct reset_line { -+ struct list_head list; -+ unsigned int id; -+ unsigned int refcnt; -+ unsigned int deassert_cnt; -+}; -+ -+/** - * struct reset_control - a reset control - * @rcdev: a pointer to the reset controller device - * this reset control belongs to -- * @id: ID of the reset controller in the reset -- * controller device -+ * @line: reset line for this reset control - */ - struct reset_control { - struct reset_controller_dev *rcdev; -+ struct reset_line *line; - struct device *dev; -- unsigned int id; - }; - - /** -@@ -66,6 +79,8 @@ int reset_controller_register(struct res - rcdev->of_xlate = of_reset_simple_xlate; - } - -+ INIT_LIST_HEAD(&rcdev->reset_line_head); -+ - mutex_lock(&reset_controller_list_mutex); - list_add(&rcdev->list, &reset_controller_list); - mutex_unlock(&reset_controller_list_mutex); -@@ -93,7 +108,7 @@ EXPORT_SYMBOL_GPL(reset_controller_unreg - int reset_control_reset(struct reset_control *rstc) - { - if (rstc->rcdev->ops->reset) -- return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id); -+ return rstc->rcdev->ops->reset(rstc->rcdev, rstc->line->id); - - return -ENOTSUPP; - } -@@ -106,7 +121,7 @@ EXPORT_SYMBOL_GPL(reset_control_reset); - int reset_control_assert(struct reset_control *rstc) - { - if (rstc->rcdev->ops->assert) -- return rstc->rcdev->ops->assert(rstc->rcdev, rstc->id); -+ return rstc->rcdev->ops->assert(rstc->rcdev, rstc->line->id); - - return -ENOTSUPP; - } -@@ -119,13 +134,55 @@ EXPORT_SYMBOL_GPL(reset_control_assert); - int reset_control_deassert(struct reset_control *rstc) - { - if (rstc->rcdev->ops->deassert) -- return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->id); -+ return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->line->id); - - return -ENOTSUPP; - } - EXPORT_SYMBOL_GPL(reset_control_deassert); - - /** -+ * reset_control_assert_shared - asserts a shared reset line -+ * @rstc: reset controller -+ * -+ * Assert a shared reset line, this functions decreases the deassert count -+ * of the line by one and asserts it if, and only if, the deassert count -+ * reaches 0. -+ */ -+int reset_control_assert_shared(struct reset_control *rstc) -+{ -+ if (!rstc->rcdev->ops->assert) -+ return -ENOTSUPP; -+ -+ rstc->line->deassert_cnt--; -+ if (rstc->line->deassert_cnt) -+ return 0; -+ -+ return rstc->rcdev->ops->assert(rstc->rcdev, rstc->line->id); -+} -+EXPORT_SYMBOL_GPL(reset_control_assert_shared); -+ -+/** -+ * reset_control_deassert_shared - deasserts a shared reset line -+ * @rstc: reset controller -+ * -+ * Assert a shared reset line, this functions increases the deassert count -+ * of the line by one and deasserts the reset line (if it was not already -+ * deasserted). -+ */ -+int reset_control_deassert_shared(struct reset_control *rstc) -+{ -+ if (!rstc->rcdev->ops->deassert) -+ return -ENOTSUPP; -+ -+ rstc->line->deassert_cnt++; -+ if (rstc->line->deassert_cnt != 1) -+ return 0; -+ -+ return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->line->id); -+} -+EXPORT_SYMBOL_GPL(reset_control_deassert_shared); -+ -+/** - * reset_control_status - returns a negative errno if not supported, a - * positive value if the reset line is asserted, or zero if the reset - * line is not asserted. -@@ -134,12 +191,47 @@ EXPORT_SYMBOL_GPL(reset_control_deassert - int reset_control_status(struct reset_control *rstc) - { - if (rstc->rcdev->ops->status) -- return rstc->rcdev->ops->status(rstc->rcdev, rstc->id); -+ return rstc->rcdev->ops->status(rstc->rcdev, rstc->line->id); - - return -ENOTSUPP; - } - EXPORT_SYMBOL_GPL(reset_control_status); - -+static struct reset_line *reset_line_get(struct reset_controller_dev *rcdev, -+ unsigned int index) -+{ -+ struct reset_line *line; -+ -+ list_for_each_entry(line, &rcdev->reset_line_head, list) { -+ if (line->id == index) { -+ line->refcnt++; -+ return line; -+ } -+ } -+ -+ line = kzalloc(sizeof(*line), GFP_KERNEL); -+ if (!line) -+ return NULL; -+ -+ list_add(&line->list, &rcdev->reset_line_head); -+ line->id = index; -+ line->refcnt = 1; -+ -+ return line; -+} -+ -+static void reset_line_put(struct reset_line *line) -+{ -+ if (!line) -+ return; -+ -+ if (--line->refcnt) -+ return; -+ -+ list_del(&line->list); -+ kfree(line); -+} -+ - /** - * of_reset_control_get_by_index - Lookup and obtain a reference to a reset - * controller by index. -@@ -155,6 +247,7 @@ struct reset_control *of_reset_control_g - { - struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER); - struct reset_controller_dev *r, *rcdev; -+ struct reset_line *line; - struct of_phandle_args args; - int rstc_id; - int ret; -@@ -186,16 +279,22 @@ struct reset_control *of_reset_control_g - } - - try_module_get(rcdev->owner); -+ -+ /* reset_controller_list_mutex also protects the reset_line list */ -+ line = reset_line_get(rcdev, rstc_id); -+ - mutex_unlock(&reset_controller_list_mutex); - - rstc = kzalloc(sizeof(*rstc), GFP_KERNEL); -- if (!rstc) { -+ if (!line || !rstc) { -+ kfree(rstc); -+ reset_line_put(line); - module_put(rcdev->owner); - return ERR_PTR(-ENOMEM); - } - - rstc->rcdev = rcdev; -- rstc->id = rstc_id; -+ rstc->line = line; - - return rstc; - } -@@ -259,6 +358,10 @@ void reset_control_put(struct reset_cont - if (IS_ERR(rstc)) - return; - -+ mutex_lock(&reset_controller_list_mutex); -+ reset_line_put(rstc->line); -+ mutex_unlock(&reset_controller_list_mutex); -+ - module_put(rstc->rcdev->owner); - kfree(rstc); - } ---- a/include/linux/reset-controller.h -+++ b/include/linux/reset-controller.h -@@ -31,6 +31,7 @@ struct of_phandle_args; - * @ops: a pointer to device specific struct reset_control_ops - * @owner: kernel module of the reset controller driver - * @list: internal list of reset controller devices -+ * @reset_line_head: head of internal list of reset lines - * @of_node: corresponding device tree node as phandle target - * @of_reset_n_cells: number of cells in reset line specifiers - * @of_xlate: translation function to translate from specifier as found in the -@@ -41,6 +42,7 @@ struct reset_controller_dev { - struct reset_control_ops *ops; - struct module *owner; - struct list_head list; -+ struct list_head reset_line_head; - struct device_node *of_node; - int of_reset_n_cells; - int (*of_xlate)(struct reset_controller_dev *rcdev, ---- a/include/linux/reset.h -+++ b/include/linux/reset.h -@@ -11,6 +11,8 @@ int reset_control_reset(struct reset_con - int reset_control_assert(struct reset_control *rstc); - int reset_control_deassert(struct reset_control *rstc); - int reset_control_status(struct reset_control *rstc); -+int reset_control_assert_shared(struct reset_control *rstc); -+int reset_control_deassert_shared(struct reset_control *rstc); - - struct reset_control *reset_control_get(struct device *dev, const char *id); - void reset_control_put(struct reset_control *rstc); diff --git a/target/linux/sunxi/patches-4.4/144-usb-ehci-plat-support-multiple-reset-ctrllines.patch b/target/linux/sunxi/patches-4.4/144-usb-ehci-plat-support-multiple-reset-ctrllines.patch deleted file mode 100644 index 73cd3027bf..0000000000 --- a/target/linux/sunxi/patches-4.4/144-usb-ehci-plat-support-multiple-reset-ctrllines.patch +++ /dev/null @@ -1,127 +0,0 @@ -From 957e8f96c67052ca843ea9ffc5223662b973e5de Mon Sep 17 00:00:00 2001 -From: Reinder de Haan -Date: Sun, 15 Nov 2015 14:24:46 +0100 -Subject: [PATCH] ehci-platform: Add support for controllers with multiple - reset lines - -At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple -reset lines, the controller will not initialize while the reset for -its companion is still asserted, which means we need to de-assert -2 resets for the controller to work. - -Signed-off-by: Reinder de Haan -Signed-off-by: Hans de Goede ---- -Changes in v2: --Use the new reset_control_[de]assert_shared reset-controller functions ---- - Documentation/devicetree/bindings/usb/usb-ehci.txt | 2 +- - drivers/usb/host/ehci-platform.c | 47 +++++++++++++--------- - 2 files changed, 30 insertions(+), 19 deletions(-) - ---- a/Documentation/devicetree/bindings/usb/usb-ehci.txt -+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt -@@ -18,7 +18,7 @@ Optional properties: - - clocks : a list of phandle + clock specifier pairs - - phys : phandle + phy specifier pair - - phy-names : "usb" -- - resets : phandle + reset specifier pair -+ - resets : a list of phandle + reset specifier pairs - - Example (Sequoia 440EPx): - ehci@e0000300 { ---- a/drivers/usb/host/ehci-platform.c -+++ b/drivers/usb/host/ehci-platform.c -@@ -39,11 +39,12 @@ - - #define DRIVER_DESC "EHCI generic platform driver" - #define EHCI_MAX_CLKS 3 -+#define EHCI_MAX_RESETS 2 - #define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv) - - struct ehci_platform_priv { - struct clk *clks[EHCI_MAX_CLKS]; -- struct reset_control *rst; -+ struct reset_control *resets[EHCI_MAX_RESETS]; - struct phy **phys; - int num_phys; - bool reset_on_resume; -@@ -149,7 +150,7 @@ static int ehci_platform_probe(struct pl - struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); - struct ehci_platform_priv *priv; - struct ehci_hcd *ehci; -- int err, irq, phy_num, clk = 0; -+ int err, irq, phy_num, clk = 0, rst = 0; - - if (usb_disabled()) - return -ENODEV; -@@ -232,18 +233,24 @@ static int ehci_platform_probe(struct pl - break; - } - } -- } - -- priv->rst = devm_reset_control_get_optional(&dev->dev, NULL); -- if (IS_ERR(priv->rst)) { -- err = PTR_ERR(priv->rst); -- if (err == -EPROBE_DEFER) -- goto err_put_clks; -- priv->rst = NULL; -- } else { -- err = reset_control_deassert(priv->rst); -- if (err) -- goto err_put_clks; -+ for (rst = 0; rst < EHCI_MAX_RESETS; rst++) { -+ priv->resets[rst] = -+ of_reset_control_get_by_index(dev->dev.of_node, -+ rst); -+ if (IS_ERR(priv->resets[rst])) { -+ err = PTR_ERR(priv->resets[rst]); -+ if (err == -EPROBE_DEFER) -+ goto err_reset; -+ priv->resets[rst] = NULL; -+ break; -+ } -+ err = reset_control_deassert_shared(priv->resets[rst]); -+ if (err) { -+ reset_control_put(priv->resets[rst]); -+ goto err_reset; -+ } -+ } - } - - if (pdata->big_endian_desc) -@@ -302,8 +309,10 @@ err_power: - if (pdata->power_off) - pdata->power_off(dev); - err_reset: -- if (priv->rst) -- reset_control_assert(priv->rst); -+ while (--rst >= 0) { -+ reset_control_assert_shared(priv->resets[rst]); -+ reset_control_put(priv->resets[rst]); -+ } - err_put_clks: - while (--clk >= 0) - clk_put(priv->clks[clk]); -@@ -321,15 +330,17 @@ static int ehci_platform_remove(struct p - struct usb_hcd *hcd = platform_get_drvdata(dev); - struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); - struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); -- int clk; -+ int clk, rst; - - usb_remove_hcd(hcd); - - if (pdata->power_off) - pdata->power_off(dev); - -- if (priv->rst) -- reset_control_assert(priv->rst); -+ for (rst = 0; rst < EHCI_MAX_RESETS && priv->resets[rst]; rst++) { -+ reset_control_assert_shared(priv->resets[rst]); -+ reset_control_put(priv->resets[rst]); -+ } - - for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) - clk_put(priv->clks[clk]); diff --git a/target/linux/sunxi/patches-4.4/145-usb-ohci-plat-support-multiple-reset-ctrllines.patch b/target/linux/sunxi/patches-4.4/145-usb-ohci-plat-support-multiple-reset-ctrllines.patch deleted file mode 100644 index a25d487aad..0000000000 --- a/target/linux/sunxi/patches-4.4/145-usb-ohci-plat-support-multiple-reset-ctrllines.patch +++ /dev/null @@ -1,128 +0,0 @@ -From 5f0c864c1f207dba1db587747a58ec6b362dadf8 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sun, 29 Nov 2015 18:44:14 +0100 -Subject: [PATCH] ohci-platform: Add support for controllers with multiple - reset lines - -At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple -reset lines, the controller will not initialize while the reset for -its companion is still asserted, which means we need to de-assert -2 resets for the controller to work. - -Signed-off-by: Hans de Goede ---- -Changes in v2: --New patch in v2 of this patch-set, to complement the identical patch for - the ehci-platform code ---- - Documentation/devicetree/bindings/usb/usb-ohci.txt | 2 +- - drivers/usb/host/ohci-platform.c | 49 +++++++++++++--------- - 2 files changed, 30 insertions(+), 21 deletions(-) - ---- a/Documentation/devicetree/bindings/usb/usb-ohci.txt -+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt -@@ -14,7 +14,7 @@ Optional properties: - - clocks : a list of phandle + clock specifier pairs - - phys : phandle + phy specifier pair - - phy-names : "usb" --- resets : phandle + reset specifier pair -+- resets : a list of phandle + reset specifier pairs - - Example: - ---- a/drivers/usb/host/ohci-platform.c -+++ b/drivers/usb/host/ohci-platform.c -@@ -33,11 +33,12 @@ - - #define DRIVER_DESC "OHCI generic platform driver" - #define OHCI_MAX_CLKS 3 -+#define OHCI_MAX_RESETS 2 - #define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv) - - struct ohci_platform_priv { - struct clk *clks[OHCI_MAX_CLKS]; -- struct reset_control *rst; -+ struct reset_control *resets[OHCI_MAX_RESETS]; - struct phy **phys; - int num_phys; - }; -@@ -117,7 +118,7 @@ static int ohci_platform_probe(struct pl - struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); - struct ohci_platform_priv *priv; - struct ohci_hcd *ohci; -- int err, irq, phy_num, clk = 0; -+ int err, irq, phy_num, clk = 0, rst = 0; - - if (usb_disabled()) - return -ENODEV; -@@ -195,19 +196,23 @@ static int ohci_platform_probe(struct pl - break; - } - } -- -- } -- -- priv->rst = devm_reset_control_get_optional(&dev->dev, NULL); -- if (IS_ERR(priv->rst)) { -- err = PTR_ERR(priv->rst); -- if (err == -EPROBE_DEFER) -- goto err_put_clks; -- priv->rst = NULL; -- } else { -- err = reset_control_deassert(priv->rst); -- if (err) -- goto err_put_clks; -+ for (rst = 0; rst < OHCI_MAX_RESETS; rst++) { -+ priv->resets[rst] = -+ of_reset_control_get_by_index(dev->dev.of_node, -+ rst); -+ if (IS_ERR(priv->resets[rst])) { -+ err = PTR_ERR(priv->resets[rst]); -+ if (err == -EPROBE_DEFER) -+ goto err_reset; -+ priv->resets[rst] = NULL; -+ break; -+ } -+ err = reset_control_deassert_shared(priv->resets[rst]); -+ if (err) { -+ reset_control_put(priv->resets[rst]); -+ goto err_reset; -+ } -+ } - } - - if (pdata->big_endian_desc) -@@ -265,8 +270,10 @@ err_power: - if (pdata->power_off) - pdata->power_off(dev); - err_reset: -- if (priv->rst) -- reset_control_assert(priv->rst); -+ while (--rst >= 0) { -+ reset_control_assert_shared(priv->resets[rst]); -+ reset_control_put(priv->resets[rst]); -+ } - err_put_clks: - while (--clk >= 0) - clk_put(priv->clks[clk]); -@@ -284,15 +291,17 @@ static int ohci_platform_remove(struct p - struct usb_hcd *hcd = platform_get_drvdata(dev); - struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); - struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); -- int clk; -+ int clk, rst; - - usb_remove_hcd(hcd); - - if (pdata->power_off) - pdata->power_off(dev); - -- if (priv->rst) -- reset_control_assert(priv->rst); -+ for (rst = 0; rst < OHCI_MAX_RESETS && priv->resets[rst]; rst++) { -+ reset_control_assert_shared(priv->resets[rst]); -+ reset_control_put(priv->resets[rst]); -+ } - - for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) - clk_put(priv->clks[clk]); diff --git a/target/linux/sunxi/patches-4.4/150-dt-sun7i-enable-codec-on-pcduino3.patch b/target/linux/sunxi/patches-4.4/150-dt-sun7i-enable-codec-on-pcduino3.patch deleted file mode 100644 index c967ca91a7..0000000000 --- a/target/linux/sunxi/patches-4.4/150-dt-sun7i-enable-codec-on-pcduino3.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 5296d8ff65298091758aa8d50d00539cd3781042 Mon Sep 17 00:00:00 2001 -From: Jelle van der Waa -Date: Sun, 9 Aug 2015 18:51:22 +0200 -Subject: [PATCH] ARM: dts: sun7i: Enable audio codec on pcDuino - -Enable the on-chip audio codec - -Signed-off-by: Jelle van der Waa -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts -+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts -@@ -111,6 +111,11 @@ - allwinner,pins = "PH2"; - }; - -+ -+&codec { -+ status = "okay"; -+}; -+ - &cpu0 { - cpu-supply = <®_dcdc2>; - }; diff --git a/target/linux/sunxi/patches-4.4/200-dt-sun7i-add-lamobo-r1.patch b/target/linux/sunxi/patches-4.4/200-dt-sun7i-add-lamobo-r1.patch deleted file mode 100644 index b1e00b45ab..0000000000 --- a/target/linux/sunxi/patches-4.4/200-dt-sun7i-add-lamobo-r1.patch +++ /dev/null @@ -1,330 +0,0 @@ -From 46662c86b453d7098ff22d6112d0481f07d523a1 Mon Sep 17 00:00:00 2001 -From: Jelle de Jong -Date: Sun, 18 Oct 2015 16:34:39 +0200 -Subject: [PATCH] ARM: dts: sun7i: Add dts file for the lamobo-r1 board - -The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such -on the PCB, is meant as a A20 based router board. As such the board comes -with a built-in switch chip giving it 5 gigabit ethernet boards, and it -has a large empty area on the pcb with mounting holes which will fit a -2.5 inch harddisk. To complete its networking features it has a -Realtek RTL8192CU for WiFi 802.11 b/g/n. - -Signed-off-by: Jelle de Jong -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 297 ++++++++++++++++++++++++++++++ - 2 files changed, 298 insertions(+) - create mode 100644 arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -638,6 +638,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ - sun7i-a20-cubietruck.dtb \ - sun7i-a20-hummingbird.dtb \ - sun7i-a20-i12-tvbox.dtb \ -+ sun7i-a20-lamobo-r1.dtb \ - sun7i-a20-m3.dtb \ - sun7i-a20-mk808c.dtb \ - sun7i-a20-olimex-som-evb.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts -@@ -0,0 +1,297 @@ -+/* -+ * Copyright 2015 Jelle de Jong -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include "sun7i-a20.dtsi" -+#include "sunxi-common-regulators.dtsi" -+ -+#include -+#include -+#include -+ -+/ { -+ model = "Lamobo R1"; -+ compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20"; -+ -+ aliases { -+ serial0 = &uart0; -+ serial1 = &uart3; -+ serial2 = &uart7; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&led_pins_lamobo_r1>; -+ -+ green { -+ label = "lamobo_r1:green:usr"; -+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_power_pin_lamobo_r1>; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ -+ }; -+}; -+ -+&ahci_pwr_pin_a { -+ allwinner,pins = "PB3"; -+}; -+ -+&ahci { -+ target-supply = <®_ahci_5v>; -+ status = "okay"; -+}; -+ -+&cpu0 { -+ cpu-supply = <®_dcdc2>; -+ operating-points = < -+ /* kHz uV */ -+ 960000 1400000 -+ 912000 1400000 -+ 864000 1350000 -+ 720000 1250000 -+ 528000 1150000 -+ 312000 1100000 -+ 144000 1050000 -+ >; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ehci1 { -+ status = "okay"; -+}; -+ -+&gmac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_pins_rgmii_a>; -+ phy = <&phy1>; -+ phy-mode = "rgmii"; -+ phy-supply = <®_gmac_3v3>; -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+ -+ axp209: pmic@34 { -+ reg = <0x34>; -+ interrupt-parent = <&nmi_intc>; -+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>; -+ }; -+}; -+ -+&i2c2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c2_pins_a>; -+ status = "okay"; -+}; -+ -+&ir0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ir0_rx_pins_a>; -+ status = "okay"; -+}; -+ -+&mmc0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>; -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ -+ cd-inverted; -+ status = "okay"; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&ohci1 { -+ status = "okay"; -+}; -+ -+&otg_sram { -+ status = "okay"; -+}; -+ -+&pio { -+ usb0_id_detect_pin: usb0_id_detect_pin@0 { -+ allwinner,pins = "PH4"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { -+ allwinner,pins = "PH10"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ gmac_power_pin_lamobo_r1: gmac_power_pin@0 { -+ allwinner,pins = "PH23"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ led_pins_lamobo_r1: led_pins@0 { -+ allwinner,pins = "PH24"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+}; -+ -+#include "axp209.dtsi" -+ -+®_ahci_5v { -+ gpio = <&pio 1 3 0>; /* PB3 */ -+ status = "okay"; -+}; -+ -+®_dcdc2 { -+ regulator-always-on; -+ regulator-min-microvolt = <1000000>; -+ regulator-max-microvolt = <1400000>; -+ regulator-name = "vdd-cpu"; -+}; -+ -+®_dcdc3 { -+ regulator-always-on; -+ regulator-min-microvolt = <1000000>; -+ regulator-max-microvolt = <1400000>; -+ regulator-name = "vdd-int-dll"; -+}; -+ -+®_ldo1 { -+ regulator-name = "vdd-rtc"; -+}; -+ -+®_ldo2 { -+ regulator-always-on; -+ regulator-min-microvolt = <3000000>; -+ regulator-max-microvolt = <3000000>; -+ regulator-name = "avcc"; -+}; -+ -+®_usb0_vbus { -+ status = "okay"; -+}; -+ -+®_usb1_vbus { -+ status = "okay"; -+}; -+ -+®_usb2_vbus { -+ status = "okay"; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins_a>, -+ <&spi0_cs0_pins_a>, -+ <&spi0_cs1_pins_a>; -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+}; -+ -+&uart3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart3_pins_b>; -+ status = "okay"; -+}; -+ -+&uart7 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart7_pins_a>; -+ status = "okay"; -+}; -+ -+&usb_otg { -+ dr_mode = "otg"; -+ status = "okay"; -+}; -+ -+&usb_power_supply { -+ status = "okay"; -+}; -+ -+&usbphy { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb0_id_detect_pin>; -+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ -+ usb0_vbus_power-supply = <&usb_power_supply>; -+ usb0_vbus-supply = <®_usb0_vbus>; -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+};