From: John Crispin Date: Tue, 18 Feb 2014 13:33:25 +0000 (+0000) Subject: ralink: add support for na930 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b56bef28d79c2cb3ffdc86d9b84b5aa16c649547;p=openwrt%2Fsvn-archive%2Fopenwrt.git ralink: add support for na930 Signed-off-by: John Crispin SVN-Revision: 39611 --- diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index d57cc7ac22..4168d0a2bd 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -160,7 +160,10 @@ get_status_led() { ;; f7c027) status_led="belkin:orange:status" - ;; + ;; + na930) + status_led="na930:blue:power" + ;; esac } diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds index ca4c131781..567835e6b1 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds @@ -115,6 +115,9 @@ case $board in mzk-w300nh2) set_wifi_led "mzkw300nh2:amber:wlan" ;; + na930) + set_usb_led "na930:blue:status" + ;; nw718) set_usb_led "nw718:amber:usb" ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index 65c05899c3..703471838d 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -146,6 +146,7 @@ ramips_setup_interfaces() ;; d105 | \ + na930 | \ omni-emb-hpm|\ wli-tx4-ag300n) ucidef_set_interface_lan "eth0" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 7aa331334e..5a686e6719 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -280,6 +280,9 @@ ramips_board_detect() { *"V22SG") name="v22sg" ;; + *"Sercomm NA930") + name="na930" + ;; *) name="generic" ;; diff --git a/target/linux/ramips/dts/NA930.dts b/target/linux/ramips/dts/NA930.dts new file mode 100644 index 0000000000..6fe9964da9 --- /dev/null +++ b/target/linux/ramips/dts/NA930.dts @@ -0,0 +1,164 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc"; + model = "Sercomm NA930"; + + chosen { + bootargs = "console=ttyS1,57600"; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "rgmii2", "spi", "ephy"; + ralink,function = "gpio"; + }; + uartf_gpio { + ralink,group = "uartf"; + ralink,function = "gpio uartf"; + }; + }; + }; + + palmbus@10000000 { + uart@500 { + status = "okay"; + }; + + gpio@638 { + status = "okay"; + }; + + gpio@660 { + status = "okay"; + }; + }; + + nand { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mtk,mt7620-nand"; + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + partition@200000 { + label = "factory"; + reg = <0x200000 0x40000>; + read-only; + }; + partition@240000 { + label = "Config"; + reg = <0x240000 0x400000>; + read-only; + }; + partition@640000 { + label = "firmware"; + reg = <0x640000 0x1400000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &mdio_pins>; + + ralink,port-map = "llllw"; + + port@4 { + status = "okay"; + phy-handle = <&phy4>; + phy-mode = "rgmii"; + }; + + port@5 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii"; + }; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 11 1>; + linux,code = <0x198>; + }; + zwave { + label = "zwave"; + gpios = <&gpio0 12 1>; + linux,code = <0x100>; + }; + wps { + label = "wps"; + gpios = <&gpio0 14 1>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + zwave { + label = "na930:blue:zwave"; + gpios = <&gpio2 0 1>; + }; + status { + label = "na930:blue:status"; + gpios = <&gpio2 26 1>; + }; + service { + label = "na930:blue:service"; + gpios = <&gpio2 28 1>; + }; + power { + label = "na930:blue:power"; + gpios = <&gpio2 29 1>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + telit { + gpio-export,name = "telit"; + gpio-export,output = <1>; + gpios = <&gpio0 13 0>; + }; + }; + + gsw@10110000 { + ralink,port4 = "gmac"; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 8fb0107ebd..ae95b68655 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -666,6 +666,8 @@ Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300 Image/Build/Profile/WHR600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,WHR-600D,$(whr_300hp2_mtd_size)) dlink810l_mtd_size=6881280 Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size)) +na930_mtd_size=20971520 +Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size)) ifeq ($(SUBTARGET),mt7620a) define Image/Build/Profile/Default @@ -677,6 +679,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/DIR-810L,$(1)) $(call Image/Build/Profile/WHR300HP2,$(1)) $(call Image/Build/Profile/WHR600D,$(1)) + $(call Image/Build/Profile/NA930,$(1)) endef endif diff --git a/target/linux/ramips/mt7620a/config-3.10 b/target/linux/ramips/mt7620a/config-3.10 index 1320574b97..6805dd9efa 100644 --- a/target/linux/ramips/mt7620a/config-3.10 +++ b/target/linux/ramips/mt7620a/config-3.10 @@ -6,6 +6,7 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_AT803X_PHY=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_CEVT_R4K=y CONFIG_CLKDEV_LOOKUP=y @@ -78,11 +79,13 @@ CONFIG_HW_HAS_PCI=y CONFIG_HW_RANDOM=m CONFIG_HZ_PERIODIC=y CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INET_LRO=y CONFIG_INITRAMFS_SOURCE="" CONFIG_IRQCHIP=y CONFIG_IRQ_CPU=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_INTC=y CONFIG_IRQ_WORK=y CONFIG_M25PXX_USE_FAST_READ=y CONFIG_MDIO_BOARDINFO=y