From: Tomasz Maciej Nowak Date: Tue, 7 Jun 2022 13:58:29 +0000 (+0200) Subject: ath79: ja76pf2: use nvmem cells to specify MAC addresses X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b52719b71a3337e5ae840c7a50fe41ebdc070f4e;p=openwrt%2Fstaging%2Fjow.git ath79: ja76pf2: use nvmem cells to specify MAC addresses The bootloader on this board hid the partition containig MAC addresses and prevented adding this space to FIS directory, therefore those had to be stored in RedBoot configuration as aliases to be able to assigne them to proper interfaces. Now that fixed partition size are used instead of redboot-fis parser, the partition containig MAC addresses could be specified, and with marking it as nvmem cell, we can assign them without userspace involvement. Signed-off-by: Tomasz Maciej Nowak --- diff --git a/target/linux/ath79/dts/ar7161_jjplus_ja76pf2.dts b/target/linux/ath79/dts/ar7161_jjplus_ja76pf2.dts index b528c1b69e..dca226d262 100644 --- a/target/linux/ath79/dts/ar7161_jjplus_ja76pf2.dts +++ b/target/linux/ath79/dts/ar7161_jjplus_ja76pf2.dts @@ -101,12 +101,16 @@ ð0 { status = "okay"; + nvmem-cells = <&macaddr_lan>; + nvmem-cell-names = "mac-address"; phy-handle = <&phy0>; }; ð1 { status = "okay"; + nvmem-cells = <&macaddr_wan>; + nvmem-cell-names = "mac-address"; phy-handle = <&phy4>; }; @@ -161,6 +165,17 @@ label = "Atheros Board Data"; reg = <0xff0000 0x10000>; read-only; + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_wan: macaddr@1000 { + reg = <0x1000 0x6>; + }; + + macaddr_lan: macaddr@1006 { + reg = <0x1006 0x6>; + }; }; }; }; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 209395f024..42ab19b47a 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -652,10 +652,6 @@ ath79_setup_macs() wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) label_mac=$wan_mac ;; - jjplus,ja76pf2) - wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n alias/ethaddr) - lan_mac=$(macaddr_add "$wan_mac" 1) - ;; mercury,mw4530r-v1|\ tplink,tl-wdr3600-v1|\ tplink,tl-wdr4300-v1|\