From: Rui Salvaterra Date: Mon, 22 Feb 2021 17:37:11 +0000 (+0000) Subject: mvebu: refresh 5.10 kconfigs/patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b43f5a935922fbcbd19e62fd6ad3299a19a0375a;p=openwrt%2Fstaging%2Fjow.git mvebu: refresh 5.10 kconfigs/patches Also delete already upstreamed patches/changes. Reviewed-by: Tomasz Maciej Nowak Tested-by: Tomasz Maciej Nowak Signed-off-by: Rui Salvaterra --- diff --git a/target/linux/mvebu/config-5.10 b/target/linux/mvebu/config-5.10 index beeecd138e..4b0e9b16ab 100644 --- a/target/linux/mvebu/config-5.10 +++ b/target/linux/mvebu/config-5.10 @@ -1,7 +1,6 @@ CONFIG_AHCI_MVEBU=y CONFIG_ALIGNMENT_TRAP=y CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_KEEP_MEMBLOCK=y CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y @@ -12,6 +11,8 @@ CONFIG_ARCH_MVEBU=y CONFIG_ARCH_NR_GPIO=0 CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARM=y CONFIG_ARMADA_370_CLK=y @@ -22,6 +23,8 @@ CONFIG_ARMADA_38X_CLK=y CONFIG_ARMADA_THERMAL=y CONFIG_ARMADA_XP_CLK=y CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y # CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set # CONFIG_ARM_ARMADA_8K_CPUFREQ is not set CONFIG_ARM_ATAG_DTB_COMPAT=y @@ -107,6 +110,7 @@ CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRYPTD=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_DEV_MARVELL=y CONFIG_CRYPTO_DEV_MARVELL_CESA=y CONFIG_CRYPTO_ESSIV=y CONFIG_CRYPTO_HASH=y @@ -135,9 +139,7 @@ CONFIG_DEBUG_MVEBU_UART0=y # CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set # CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set CONFIG_DEBUG_UART_8250=y -# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set CONFIG_DEBUG_UART_8250_SHIFT=2 -# CONFIG_DEBUG_UART_8250_WORD is not set CONFIG_DEBUG_UART_PHYS=0xd0012000 CONFIG_DEBUG_UART_VIRT=0xfec12000 CONFIG_DEBUG_UNCOMPRESS=y @@ -146,6 +148,7 @@ CONFIG_DMADEVICES=y CONFIG_DMA_ENGINE=y CONFIG_DMA_ENGINE_RAID=y CONFIG_DMA_OF=y +CONFIG_DMA_OPS=y CONFIG_DMA_REMAP=y CONFIG_DTC=y CONFIG_EARLY_PRINTK=y @@ -166,6 +169,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_GETTIMEOFDAY=y CONFIG_GENERIC_IDLE_POLL_SETUP=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y @@ -182,6 +186,7 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_VDSO_32=y CONFIG_GLOB=y CONFIG_GPIOLIB=y CONFIG_GPIOLIB_IRQCHIP=y @@ -226,6 +231,7 @@ CONFIG_LEDS_PCA963X=y CONFIG_LEDS_TLC591XX=y CONFIG_LEDS_TRIGGER_DISK=y CONFIG_LIBFDT=y +CONFIG_LLD_VERSION=0 CONFIG_LOCK_DEBUGGING_SUPPORT=y CONFIG_LOCK_SPIN_ON_OWNER=y CONFIG_LZO_COMPRESS=y @@ -259,6 +265,7 @@ CONFIG_MMC_SDHCI_PXAV3=y CONFIG_MODULES_USE_ELF_REL=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_NAND_CORE=y +CONFIG_MTD_NAND_ECC=y CONFIG_MTD_NAND_ECC_SW_HAMMING=y CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_RAW_NAND=y @@ -286,7 +293,6 @@ CONFIG_NET_DEVLINK=y CONFIG_NET_DSA=y CONFIG_NET_DSA_MV88E6XXX=y CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y -# CONFIG_NET_DSA_MV88E6XXX_PTP is not set CONFIG_NET_DSA_TAG_DSA=y CONFIG_NET_DSA_TAG_EDSA=y CONFIG_NET_FLOW_LIMIT=y @@ -343,7 +349,6 @@ CONFIG_PWM_SYSFS=y CONFIG_RATIONAL=y CONFIG_RCU_NEED_SEGCBLIST=y CONFIG_RCU_STALL_COMMON=y -CONFIG_REFCOUNT_FULL=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_MMIO=y @@ -358,10 +363,10 @@ CONFIG_RTC_I2C_AND_SPI=y CONFIG_RTC_MC146818_LIB=y CONFIG_RWSEM_SPIN_ON_OWNER=y CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_SATA_HOST=y CONFIG_SATA_MV=y CONFIG_SATA_PMP=y CONFIG_SCSI=y -# CONFIG_SENSORS_DRIVETEMP is not set CONFIG_SENSORS_PWM_FAN=y CONFIG_SENSORS_TMP421=y CONFIG_SERIAL_8250_DW=y diff --git a/target/linux/mvebu/cortexa53/config-5.10 b/target/linux/mvebu/cortexa53/config-5.10 index 79d53932d0..a3de912b99 100644 --- a/target/linux/mvebu/cortexa53/config-5.10 +++ b/target/linux/mvebu/cortexa53/config-5.10 @@ -5,19 +5,16 @@ CONFIG_ARCH_MMAP_RND_BITS_MAX=24 CONFIG_ARCH_MMAP_RND_BITS_MIN=18 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_STACKWALK=y CONFIG_ARM64=y CONFIG_ARM64_4K_PAGES=y -CONFIG_ARM64_CONT_SHIFT=4 # CONFIG_ARM64_ERRATUM_1165522 is not set # CONFIG_ARM64_ERRATUM_1286807 is not set CONFIG_ARM64_PAGE_SHIFT=12 CONFIG_ARM64_PA_BITS=48 CONFIG_ARM64_PA_BITS_48=y CONFIG_ARM64_PTR_AUTH=y -CONFIG_ARM64_SSBD=y CONFIG_ARM64_SVE=y CONFIG_ARM64_TAGGED_ADDR_ABI=y CONFIG_ARM64_VA_BITS=39 @@ -27,8 +24,6 @@ CONFIG_ARMADA_AP806_SYSCON=y CONFIG_ARMADA_AP_CP_HELPER=y CONFIG_ARMADA_CP110_SYSCON=y CONFIG_ARM_AMBA=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y CONFIG_ARM_ARMADA_37XX_CPUFREQ=y CONFIG_ARM_GIC_V2M=y CONFIG_ARM_GIC_V3=y @@ -40,16 +35,13 @@ CONFIG_ARM_PSCI_FW=y CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y # CONFIG_CAVIUM_TX2_ERRATUM_219 is not set CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y -# CONFIG_DEBUG_ALIGN_RODATA is not set CONFIG_DMA_DIRECT_REMAP=y -CONFIG_DRM_RCAR_WRITEBACK=y # CONFIG_FLATMEM_MANUAL is not set CONFIG_FRAME_POINTER=y # CONFIG_FUJITSU_ERRATUM_010001 is not set CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_CPU_VULNERABILITIES=y CONFIG_GENERIC_CSUM=y -CONFIG_GENERIC_GETTIMEOFDAY=y CONFIG_GENERIC_PINCONF=y CONFIG_HOLES_IN_ZONE=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 diff --git a/target/linux/mvebu/cortexa72/config-5.10 b/target/linux/mvebu/cortexa72/config-5.10 index db50baf1a9..6ffe6c9f13 100644 --- a/target/linux/mvebu/cortexa72/config-5.10 +++ b/target/linux/mvebu/cortexa72/config-5.10 @@ -5,19 +5,16 @@ CONFIG_ARCH_MMAP_RND_BITS_MAX=24 CONFIG_ARCH_MMAP_RND_BITS_MIN=18 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_STACKWALK=y CONFIG_ARM64=y CONFIG_ARM64_4K_PAGES=y -CONFIG_ARM64_CONT_SHIFT=4 # CONFIG_ARM64_ERRATUM_1165522 is not set # CONFIG_ARM64_ERRATUM_1286807 is not set CONFIG_ARM64_PAGE_SHIFT=12 CONFIG_ARM64_PA_BITS=48 CONFIG_ARM64_PA_BITS_48=y # CONFIG_ARM64_PTR_AUTH is not set -CONFIG_ARM64_SSBD=y CONFIG_ARM64_SVE=y # CONFIG_ARM64_TAGGED_ADDR_ABI is not set CONFIG_ARM64_VA_BITS=39 @@ -27,8 +24,6 @@ CONFIG_ARMADA_AP806_SYSCON=y CONFIG_ARMADA_AP_CP_HELPER=y CONFIG_ARMADA_CP110_SYSCON=y CONFIG_ARM_AMBA=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y CONFIG_ARM_GIC_V2M=y CONFIG_ARM_GIC_V3=y CONFIG_ARM_GIC_V3_ITS=y @@ -39,16 +34,13 @@ CONFIG_ARM_PSCI_FW=y CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y # CONFIG_CAVIUM_TX2_ERRATUM_219 is not set CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y -# CONFIG_DEBUG_ALIGN_RODATA is not set CONFIG_DMA_DIRECT_REMAP=y -CONFIG_DRM_RCAR_WRITEBACK=y # CONFIG_FLATMEM_MANUAL is not set CONFIG_FRAME_POINTER=y # CONFIG_FUJITSU_ERRATUM_010001 is not set CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_CPU_VULNERABILITIES=y CONFIG_GENERIC_CSUM=y -CONFIG_GENERIC_GETTIMEOFDAY=y CONFIG_GENERIC_PINCONF=y CONFIG_HOLES_IN_ZONE=y CONFIG_HW_RANDOM_OMAP=y diff --git a/target/linux/mvebu/patches-5.10/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch b/target/linux/mvebu/patches-5.10/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch deleted file mode 100644 index 95abbce002..0000000000 --- a/target/linux/mvebu/patches-5.10/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch +++ /dev/null @@ -1,50 +0,0 @@ -From f4c7d053d7f77cd5c1a1ba7c7ce085ddba13d1d7 Mon Sep 17 00:00:00 2001 -From: Remi Pommarel -Date: Wed, 22 May 2019 23:33:50 +0200 -Subject: [PATCH] PCI: aardvark: Wait for endpoint to be ready before training - link - -When configuring pcie reset pin from gpio (e.g. initially set by -u-boot) to pcie function this pin goes low for a brief moment -asserting the PERST# signal. Thus connected device enters fundamental -reset process and link configuration can only begin after a minimal -100ms delay (see [1]). - -Because the pin configuration comes from the "default" pinctrl it is -implicitly configured before the probe callback is called: - -driver_probe_device() - really_probe() - ... - pinctrl_bind_pins() /* Here pin goes from gpio to PCIE reset - function and PERST# is asserted */ - ... - drv->probe() - -[1] "PCI Express Base Specification", REV. 4.0 - PCI Express, February 19 2014, 6.6.1 Conventional Reset - -Signed-off-by: Remi Pommarel -Signed-off-by: Lorenzo Pieralisi -Acked-by: Thomas Petazzoni ---- - drivers/pci/controller/pci-aardvark.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/drivers/pci/controller/pci-aardvark.c -+++ b/drivers/pci/controller/pci-aardvark.c -@@ -337,6 +337,14 @@ static void advk_pcie_setup_hw(struct ad - reg |= PIO_CTRL_ADDR_WIN_DISABLE; - advk_writel(pcie, reg, PIO_CTRL); - -+ /* -+ * PERST# signal could have been asserted by pinctrl subsystem before -+ * probe() callback has been called, making the endpoint going into -+ * fundamental reset. As required by PCI Express spec a delay for at -+ * least 100ms after such a reset before link training is needed. -+ */ -+ msleep(PCI_PM_D3COLD_WAIT); -+ - /* Start link training */ - reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG); - reg |= PCIE_CORE_LINK_TRAINING; diff --git a/target/linux/mvebu/patches-5.10/002-PCI-aardvark-Don-t-rely-on-jiffies-while-holding-spi.patch b/target/linux/mvebu/patches-5.10/002-PCI-aardvark-Don-t-rely-on-jiffies-while-holding-spi.patch deleted file mode 100644 index db4afd22a2..0000000000 --- a/target/linux/mvebu/patches-5.10/002-PCI-aardvark-Don-t-rely-on-jiffies-while-holding-spi.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 7fbcb5da811be7d47468417c7795405058abb3da Mon Sep 17 00:00:00 2001 -From: Remi Pommarel -Date: Fri, 27 Sep 2019 10:55:02 +0200 -Subject: [PATCH] PCI: aardvark: Don't rely on jiffies while holding spinlock - -advk_pcie_wait_pio() can be called while holding a spinlock (from -pci_bus_read_config_dword()), then depends on jiffies in order to -timeout while polling on PIO state registers. In the case the PIO -transaction failed, the timeout will never happen and will also cause -the cpu to stall. - -This decrements a variable and wait instead of using jiffies. - -Signed-off-by: Remi Pommarel -Signed-off-by: Lorenzo Pieralisi -Reviewed-by: Andrew Murray -Acked-by: Thomas Petazzoni ---- - drivers/pci/controller/pci-aardvark.c | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - ---- a/drivers/pci/controller/pci-aardvark.c -+++ b/drivers/pci/controller/pci-aardvark.c -@@ -175,7 +175,8 @@ - (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \ - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where)) - --#define PIO_TIMEOUT_MS 1 -+#define PIO_RETRY_CNT 500 -+#define PIO_RETRY_DELAY 2 /* 2 us*/ - - #define LINK_WAIT_MAX_RETRIES 10 - #define LINK_WAIT_USLEEP_MIN 90000 -@@ -400,17 +401,16 @@ static void advk_pcie_check_pio_status(s - static int advk_pcie_wait_pio(struct advk_pcie *pcie) - { - struct device *dev = &pcie->pdev->dev; -- unsigned long timeout; -+ int i; - -- timeout = jiffies + msecs_to_jiffies(PIO_TIMEOUT_MS); -- -- while (time_before(jiffies, timeout)) { -+ for (i = 0; i < PIO_RETRY_CNT; i++) { - u32 start, isr; - - start = advk_readl(pcie, PIO_START); - isr = advk_readl(pcie, PIO_ISR); - if (!start && isr) - return 0; -+ udelay(PIO_RETRY_DELAY); - } - - dev_err(dev, "config read/write timed out\n"); diff --git a/target/linux/mvebu/patches-5.10/003-net-mvneta-introduce-mvneta_update_stats-routine.patch b/target/linux/mvebu/patches-5.10/003-net-mvneta-introduce-mvneta_update_stats-routine.patch deleted file mode 100644 index f6ce6163cf..0000000000 --- a/target/linux/mvebu/patches-5.10/003-net-mvneta-introduce-mvneta_update_stats-routine.patch +++ /dev/null @@ -1,95 +0,0 @@ -From ff519e2acd463bff6c5bb4e8d7ed350c9bae885b Mon Sep 17 00:00:00 2001 -From: Lorenzo Bianconi -Date: Sat, 19 Oct 2019 10:13:21 +0200 -Subject: [PATCH 1/7] net: mvneta: introduce mvneta_update_stats routine - -Introduce mvneta_update_stats routine to collect {rx/tx} statistics -(packets and bytes). This is a preliminary patch to add XDP support to -mvneta driver - -Signed-off-by: Lorenzo Bianconi -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 43 ++++++++++++++------------- - 1 file changed, 22 insertions(+), 21 deletions(-) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -1913,6 +1913,23 @@ static void mvneta_rxq_drop_pkts(struct - } - } - -+static void -+mvneta_update_stats(struct mvneta_port *pp, u32 pkts, -+ u32 len, bool tx) -+{ -+ struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats); -+ -+ u64_stats_update_begin(&stats->syncp); -+ if (tx) { -+ stats->tx_packets += pkts; -+ stats->tx_bytes += len; -+ } else { -+ stats->rx_packets += pkts; -+ stats->rx_bytes += len; -+ } -+ u64_stats_update_end(&stats->syncp); -+} -+ - static inline - int mvneta_rx_refill_queue(struct mvneta_port *pp, struct mvneta_rx_queue *rxq) - { -@@ -2093,14 +2110,8 @@ static int mvneta_rx_swbm(struct napi_st - rxq->left_size = 0; - } - -- if (rcvd_pkts) { -- struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats); -- -- u64_stats_update_begin(&stats->syncp); -- stats->rx_packets += rcvd_pkts; -- stats->rx_bytes += rcvd_bytes; -- u64_stats_update_end(&stats->syncp); -- } -+ if (rcvd_pkts) -+ mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false); - - /* return some buffers to hardware queue, one at a time is too slow */ - refill = mvneta_rx_refill_queue(pp, rxq); -@@ -2223,14 +2234,8 @@ err_drop_frame: - napi_gro_receive(napi, skb); - } - -- if (rcvd_pkts) { -- struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats); -- -- u64_stats_update_begin(&stats->syncp); -- stats->rx_packets += rcvd_pkts; -- stats->rx_bytes += rcvd_bytes; -- u64_stats_update_end(&stats->syncp); -- } -+ if (rcvd_pkts) -+ mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false); - - /* Update rxq management counters */ - mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done); -@@ -2476,7 +2481,6 @@ static netdev_tx_t mvneta_tx(struct sk_b - - out: - if (frags > 0) { -- struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats); - struct netdev_queue *nq = netdev_get_tx_queue(dev, txq_id); - - netdev_tx_sent_queue(nq, len); -@@ -2491,10 +2495,7 @@ out: - else - txq->pending += frags; - -- u64_stats_update_begin(&stats->syncp); -- stats->tx_packets++; -- stats->tx_bytes += len; -- u64_stats_update_end(&stats->syncp); -+ mvneta_update_stats(pp, 1, len, true); - } else { - dev->stats.tx_dropped++; - dev_kfree_skb_any(skb); diff --git a/target/linux/mvebu/patches-5.10/004-net-mvneta-introduce-page-pool-API-for-sw-buffer-man.patch b/target/linux/mvebu/patches-5.10/004-net-mvneta-introduce-page-pool-API-for-sw-buffer-man.patch deleted file mode 100644 index fbcae20f74..0000000000 --- a/target/linux/mvebu/patches-5.10/004-net-mvneta-introduce-page-pool-API-for-sw-buffer-man.patch +++ /dev/null @@ -1,181 +0,0 @@ -From 568a3fa24a95476d40afe3f8616bafb543bc4182 Mon Sep 17 00:00:00 2001 -From: Lorenzo Bianconi -Date: Sat, 19 Oct 2019 10:13:22 +0200 -Subject: [PATCH 2/7] net: mvneta: introduce page pool API for sw buffer - manager - -Use the page_pool api for allocations and DMA handling instead of -__dev_alloc_page()/dma_map_page() and free_page()/dma_unmap_page(). -Pages are unmapped using page_pool_release_page before packets -go into the network stack. - -The page_pool API offers buffer recycling capabilities for XDP but -allocates one page per packet, unless the driver splits and manages -the allocated page. -This is a preliminary patch to add XDP support to mvneta driver - -Signed-off-by: Ilias Apalodimas -Signed-off-by: Jesper Dangaard Brouer -Signed-off-by: Lorenzo Bianconi -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/Kconfig | 1 + - drivers/net/ethernet/marvell/mvneta.c | 83 +++++++++++++++++++++------ - 2 files changed, 65 insertions(+), 19 deletions(-) - ---- a/drivers/net/ethernet/marvell/Kconfig -+++ b/drivers/net/ethernet/marvell/Kconfig -@@ -61,6 +61,7 @@ config MVNETA - depends on ARCH_MVEBU || COMPILE_TEST - select MVMDIO - select PHYLINK -+ select PAGE_POOL - ---help--- - This driver supports the network interface units in the - Marvell ARMADA XP, ARMADA 370, ARMADA 38x and ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -37,6 +37,7 @@ - #include - #include - #include -+#include - - /* Registers */ - #define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2)) -@@ -607,6 +608,10 @@ struct mvneta_rx_queue { - u32 pkts_coal; - u32 time_coal; - -+ /* page_pool */ -+ struct page_pool *page_pool; -+ struct xdp_rxq_info xdp_rxq; -+ - /* Virtual address of the RX buffer */ - void **buf_virt_addr; - -@@ -1825,23 +1830,21 @@ static int mvneta_rx_refill(struct mvnet - struct mvneta_rx_queue *rxq, - gfp_t gfp_mask) - { -+ enum dma_data_direction dma_dir; - dma_addr_t phys_addr; - struct page *page; - -- page = __dev_alloc_page(gfp_mask); -+ page = page_pool_alloc_pages(rxq->page_pool, -+ gfp_mask | __GFP_NOWARN); - if (!page) - return -ENOMEM; - -- /* map page for use */ -- phys_addr = dma_map_page(pp->dev->dev.parent, page, 0, PAGE_SIZE, -- DMA_FROM_DEVICE); -- if (unlikely(dma_mapping_error(pp->dev->dev.parent, phys_addr))) { -- __free_page(page); -- return -ENOMEM; -- } -- -- phys_addr += pp->rx_offset_correction; -+ phys_addr = page_pool_get_dma_addr(page) + pp->rx_offset_correction; -+ dma_dir = page_pool_get_dma_dir(rxq->page_pool); -+ dma_sync_single_for_device(pp->dev->dev.parent, phys_addr, -+ PAGE_SIZE, dma_dir); - mvneta_rx_desc_fill(rx_desc, phys_addr, page, rxq); -+ - return 0; - } - -@@ -1907,10 +1910,12 @@ static void mvneta_rxq_drop_pkts(struct - if (!data || !(rx_desc->buf_phys_addr)) - continue; - -- dma_unmap_page(pp->dev->dev.parent, rx_desc->buf_phys_addr, -- PAGE_SIZE, DMA_FROM_DEVICE); -- __free_page(data); -+ page_pool_put_page(rxq->page_pool, data, false); - } -+ if (xdp_rxq_info_is_reg(&rxq->xdp_rxq)) -+ xdp_rxq_info_unreg(&rxq->xdp_rxq); -+ page_pool_destroy(rxq->page_pool); -+ rxq->page_pool = NULL; - } - - static void -@@ -2047,8 +2052,7 @@ static int mvneta_rx_swbm(struct napi_st - skb_add_rx_frag(rxq->skb, frag_num, page, - frag_offset, frag_size, - PAGE_SIZE); -- dma_unmap_page(dev->dev.parent, phys_addr, -- PAGE_SIZE, DMA_FROM_DEVICE); -+ page_pool_release_page(rxq->page_pool, page); - rxq->left_size -= frag_size; - } - } else { -@@ -2078,9 +2082,7 @@ static int mvneta_rx_swbm(struct napi_st - frag_offset, frag_size, - PAGE_SIZE); - -- dma_unmap_page(dev->dev.parent, phys_addr, -- PAGE_SIZE, DMA_FROM_DEVICE); -- -+ page_pool_release_page(rxq->page_pool, page); - rxq->left_size -= frag_size; - } - } /* Middle or Last descriptor */ -@@ -2847,11 +2849,54 @@ static int mvneta_poll(struct napi_struc - return rx_done; - } - -+static int mvneta_create_page_pool(struct mvneta_port *pp, -+ struct mvneta_rx_queue *rxq, int size) -+{ -+ struct page_pool_params pp_params = { -+ .order = 0, -+ .flags = PP_FLAG_DMA_MAP, -+ .pool_size = size, -+ .nid = cpu_to_node(0), -+ .dev = pp->dev->dev.parent, -+ .dma_dir = DMA_FROM_DEVICE, -+ }; -+ int err; -+ -+ rxq->page_pool = page_pool_create(&pp_params); -+ if (IS_ERR(rxq->page_pool)) { -+ err = PTR_ERR(rxq->page_pool); -+ rxq->page_pool = NULL; -+ return err; -+ } -+ -+ err = xdp_rxq_info_reg(&rxq->xdp_rxq, pp->dev, rxq->id); -+ if (err < 0) -+ goto err_free_pp; -+ -+ err = xdp_rxq_info_reg_mem_model(&rxq->xdp_rxq, MEM_TYPE_PAGE_POOL, -+ rxq->page_pool); -+ if (err) -+ goto err_unregister_rxq; -+ -+ return 0; -+ -+err_unregister_rxq: -+ xdp_rxq_info_unreg(&rxq->xdp_rxq); -+err_free_pp: -+ page_pool_destroy(rxq->page_pool); -+ rxq->page_pool = NULL; -+ return err; -+} -+ - /* Handle rxq fill: allocates rxq skbs; called when initializing a port */ - static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq, - int num) - { -- int i; -+ int i, err; -+ -+ err = mvneta_create_page_pool(pp, rxq, num); -+ if (err < 0) -+ return err; - - for (i = 0; i < num; i++) { - memset(rxq->descs + i, 0, sizeof(struct mvneta_rx_desc)); diff --git a/target/linux/mvebu/patches-5.10/005-net-mvneta-rely-on-build_skb-in-mvneta_rx_swbm-poll-.patch b/target/linux/mvebu/patches-5.10/005-net-mvneta-rely-on-build_skb-in-mvneta_rx_swbm-poll-.patch deleted file mode 100644 index 9038ca8ca8..0000000000 --- a/target/linux/mvebu/patches-5.10/005-net-mvneta-rely-on-build_skb-in-mvneta_rx_swbm-poll-.patch +++ /dev/null @@ -1,303 +0,0 @@ -From 8dc9a0888f4c8e27b25e48ff1b4bc2b3a845cc2d Mon Sep 17 00:00:00 2001 -From: Lorenzo Bianconi -Date: Sat, 19 Oct 2019 10:13:23 +0200 -Subject: [PATCH 3/7] net: mvneta: rely on build_skb in mvneta_rx_swbm poll - routine - -Refactor mvneta_rx_swbm code introducing mvneta_swbm_rx_frame and -mvneta_swbm_add_rx_fragment routines. Rely on build_skb in oreder to -allocate skb since the previous patch introduced buffer recycling using -the page_pool API. -This patch fixes even an issue in the original driver where dma buffers -are accessed before dma sync. -mvneta driver can run on not cache coherent devices so it is -necessary to sync DMA buffers before sending them to the device -in order to avoid memory corruptions. Running perf analysis we can -see a performance cost associated with this DMA-sync (anyway it is -already there in the original driver code). In follow up patches we -will add more logic to reduce DMA-sync as much as possible. - -Signed-off-by: Ilias Apalodimas -Signed-off-by: Jesper Dangaard Brouer -Signed-off-by: Lorenzo Bianconi -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 185 +++++++++++++------------- - 1 file changed, 95 insertions(+), 90 deletions(-) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -325,6 +325,11 @@ - ETH_HLEN + ETH_FCS_LEN, \ - cache_line_size()) - -+#define MVNETA_SKB_PAD (SKB_DATA_ALIGN(sizeof(struct skb_shared_info) + \ -+ NET_SKB_PAD)) -+#define MVNETA_SKB_SIZE(len) (SKB_DATA_ALIGN(len) + MVNETA_SKB_PAD) -+#define MVNETA_MAX_RX_BUF_SIZE (PAGE_SIZE - MVNETA_SKB_PAD) -+ - #define IS_TSO_HEADER(txq, addr) \ - ((addr >= txq->tso_hdrs_phys) && \ - (addr < txq->tso_hdrs_phys + txq->size * TSO_HEADER_SIZE)) -@@ -650,7 +655,6 @@ static int txq_number = 8; - static int rxq_def; - - static int rx_copybreak __read_mostly = 256; --static int rx_header_size __read_mostly = 128; - - /* HW BM need that each port be identify by a unique ID */ - static int global_port_id; -@@ -1842,7 +1846,7 @@ static int mvneta_rx_refill(struct mvnet - phys_addr = page_pool_get_dma_addr(page) + pp->rx_offset_correction; - dma_dir = page_pool_get_dma_dir(rxq->page_pool); - dma_sync_single_for_device(pp->dev->dev.parent, phys_addr, -- PAGE_SIZE, dma_dir); -+ MVNETA_MAX_RX_BUF_SIZE, dma_dir); - mvneta_rx_desc_fill(rx_desc, phys_addr, page, rxq); - - return 0; -@@ -1960,30 +1964,102 @@ int mvneta_rx_refill_queue(struct mvneta - return i; - } - -+static int -+mvneta_swbm_rx_frame(struct mvneta_port *pp, -+ struct mvneta_rx_desc *rx_desc, -+ struct mvneta_rx_queue *rxq, -+ struct page *page) -+{ -+ unsigned char *data = page_address(page); -+ int data_len = -MVNETA_MH_SIZE, len; -+ struct net_device *dev = pp->dev; -+ enum dma_data_direction dma_dir; -+ -+ if (MVNETA_SKB_SIZE(rx_desc->data_size) > PAGE_SIZE) { -+ len = MVNETA_MAX_RX_BUF_SIZE; -+ data_len += len; -+ } else { -+ len = rx_desc->data_size; -+ data_len += len - ETH_FCS_LEN; -+ } -+ -+ dma_dir = page_pool_get_dma_dir(rxq->page_pool); -+ dma_sync_single_for_cpu(dev->dev.parent, -+ rx_desc->buf_phys_addr, -+ len, dma_dir); -+ -+ rxq->skb = build_skb(data, PAGE_SIZE); -+ if (unlikely(!rxq->skb)) { -+ netdev_err(dev, -+ "Can't allocate skb on queue %d\n", -+ rxq->id); -+ dev->stats.rx_dropped++; -+ rxq->skb_alloc_err++; -+ return -ENOMEM; -+ } -+ page_pool_release_page(rxq->page_pool, page); -+ -+ skb_reserve(rxq->skb, MVNETA_MH_SIZE + NET_SKB_PAD); -+ skb_put(rxq->skb, data_len); -+ mvneta_rx_csum(pp, rx_desc->status, rxq->skb); -+ -+ rxq->left_size = rx_desc->data_size - len; -+ rx_desc->buf_phys_addr = 0; -+ -+ return 0; -+} -+ -+static void -+mvneta_swbm_add_rx_fragment(struct mvneta_port *pp, -+ struct mvneta_rx_desc *rx_desc, -+ struct mvneta_rx_queue *rxq, -+ struct page *page) -+{ -+ struct net_device *dev = pp->dev; -+ enum dma_data_direction dma_dir; -+ int data_len, len; -+ -+ if (rxq->left_size > MVNETA_MAX_RX_BUF_SIZE) { -+ len = MVNETA_MAX_RX_BUF_SIZE; -+ data_len = len; -+ } else { -+ len = rxq->left_size; -+ data_len = len - ETH_FCS_LEN; -+ } -+ dma_dir = page_pool_get_dma_dir(rxq->page_pool); -+ dma_sync_single_for_cpu(dev->dev.parent, -+ rx_desc->buf_phys_addr, -+ len, dma_dir); -+ if (data_len > 0) { -+ /* refill descriptor with new buffer later */ -+ skb_add_rx_frag(rxq->skb, -+ skb_shinfo(rxq->skb)->nr_frags, -+ page, NET_SKB_PAD, data_len, -+ PAGE_SIZE); -+ } -+ page_pool_release_page(rxq->page_pool, page); -+ rx_desc->buf_phys_addr = 0; -+ rxq->left_size -= len; -+} -+ - /* Main rx processing when using software buffer management */ - static int mvneta_rx_swbm(struct napi_struct *napi, - struct mvneta_port *pp, int budget, - struct mvneta_rx_queue *rxq) - { -+ int rcvd_pkts = 0, rcvd_bytes = 0, rx_proc = 0; - struct net_device *dev = pp->dev; -- int rx_todo, rx_proc; -- int refill = 0; -- u32 rcvd_pkts = 0; -- u32 rcvd_bytes = 0; -+ int rx_todo, refill; - - /* Get number of received packets */ - rx_todo = mvneta_rxq_busy_desc_num_get(pp, rxq); -- rx_proc = 0; - - /* Fairness NAPI loop */ -- while ((rcvd_pkts < budget) && (rx_proc < rx_todo)) { -+ while (rx_proc < budget && rx_proc < rx_todo) { - struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq); -+ u32 rx_status, index; - unsigned char *data; - struct page *page; -- dma_addr_t phys_addr; -- u32 rx_status, index; -- int rx_bytes, skb_size, copy_size; -- int frag_num, frag_size, frag_offset; - - index = rx_desc - rxq->descs; - page = (struct page *)rxq->buf_virt_addr[index]; -@@ -1991,100 +2067,30 @@ static int mvneta_rx_swbm(struct napi_st - /* Prefetch header */ - prefetch(data); - -- phys_addr = rx_desc->buf_phys_addr; - rx_status = rx_desc->status; - rx_proc++; - rxq->refill_num++; - - if (rx_status & MVNETA_RXD_FIRST_DESC) { -+ int err; -+ - /* Check errors only for FIRST descriptor */ - if (rx_status & MVNETA_RXD_ERR_SUMMARY) { - mvneta_rx_error(pp, rx_desc); - /* leave the descriptor untouched */ - continue; - } -- rx_bytes = rx_desc->data_size - -- (ETH_FCS_LEN + MVNETA_MH_SIZE); -- -- /* Allocate small skb for each new packet */ -- skb_size = max(rx_copybreak, rx_header_size); -- rxq->skb = netdev_alloc_skb_ip_align(dev, skb_size); -- if (unlikely(!rxq->skb)) { -- struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats); -- -- netdev_err(dev, -- "Can't allocate skb on queue %d\n", -- rxq->id); -- -- rxq->skb_alloc_err++; - -- u64_stats_update_begin(&stats->syncp); -- stats->rx_dropped++; -- u64_stats_update_end(&stats->syncp); -+ err = mvneta_swbm_rx_frame(pp, rx_desc, rxq, page); -+ if (err) - continue; -- } -- copy_size = min(skb_size, rx_bytes); -- -- /* Copy data from buffer to SKB, skip Marvell header */ -- memcpy(rxq->skb->data, data + MVNETA_MH_SIZE, -- copy_size); -- skb_put(rxq->skb, copy_size); -- rxq->left_size = rx_bytes - copy_size; -- -- mvneta_rx_csum(pp, rx_status, rxq->skb); -- if (rxq->left_size == 0) { -- int size = copy_size + MVNETA_MH_SIZE; -- -- dma_sync_single_range_for_cpu(dev->dev.parent, -- phys_addr, 0, -- size, -- DMA_FROM_DEVICE); -- -- /* leave the descriptor and buffer untouched */ -- } else { -- /* refill descriptor with new buffer later */ -- rx_desc->buf_phys_addr = 0; -- -- frag_num = 0; -- frag_offset = copy_size + MVNETA_MH_SIZE; -- frag_size = min(rxq->left_size, -- (int)(PAGE_SIZE - frag_offset)); -- skb_add_rx_frag(rxq->skb, frag_num, page, -- frag_offset, frag_size, -- PAGE_SIZE); -- page_pool_release_page(rxq->page_pool, page); -- rxq->left_size -= frag_size; -- } - } else { -- /* Middle or Last descriptor */ - if (unlikely(!rxq->skb)) { - pr_debug("no skb for rx_status 0x%x\n", - rx_status); - continue; - } -- if (!rxq->left_size) { -- /* last descriptor has only FCS */ -- /* and can be discarded */ -- dma_sync_single_range_for_cpu(dev->dev.parent, -- phys_addr, 0, -- ETH_FCS_LEN, -- DMA_FROM_DEVICE); -- /* leave the descriptor and buffer untouched */ -- } else { -- /* refill descriptor with new buffer later */ -- rx_desc->buf_phys_addr = 0; -- -- frag_num = skb_shinfo(rxq->skb)->nr_frags; -- frag_offset = 0; -- frag_size = min(rxq->left_size, -- (int)(PAGE_SIZE - frag_offset)); -- skb_add_rx_frag(rxq->skb, frag_num, page, -- frag_offset, frag_size, -- PAGE_SIZE); -- -- page_pool_release_page(rxq->page_pool, page); -- rxq->left_size -= frag_size; -- } -+ mvneta_swbm_add_rx_fragment(pp, rx_desc, rxq, page); - } /* Middle or Last descriptor */ - - if (!(rx_status & MVNETA_RXD_LAST_DESC)) -@@ -2109,7 +2115,6 @@ static int mvneta_rx_swbm(struct napi_st - - /* clean uncomplete skb pointer in queue */ - rxq->skb = NULL; -- rxq->left_size = 0; - } - - if (rcvd_pkts) -@@ -2970,7 +2975,7 @@ static void mvneta_rxq_hw_init(struct mv - /* Set Offset */ - mvneta_rxq_offset_set(pp, rxq, 0); - mvneta_rxq_buf_size_set(pp, rxq, PAGE_SIZE < SZ_64K ? -- PAGE_SIZE : -+ MVNETA_MAX_RX_BUF_SIZE : - MVNETA_RX_BUF_SIZE(pp->pkt_size)); - mvneta_rxq_bm_disable(pp, rxq); - mvneta_rxq_fill(pp, rxq, rxq->size); -@@ -4708,7 +4713,7 @@ static int mvneta_probe(struct platform_ - SET_NETDEV_DEV(dev, &pdev->dev); - - pp->id = global_port_id++; -- pp->rx_offset_correction = 0; /* not relevant for SW BM */ -+ pp->rx_offset_correction = NET_SKB_PAD; - - /* Obtain access to BM resources if enabled and already initialized */ - bm_node = of_parse_phandle(dn, "buffer-manager", 0); diff --git a/target/linux/mvebu/patches-5.10/006-net-mvneta-add-basic-XDP-support.patch b/target/linux/mvebu/patches-5.10/006-net-mvneta-add-basic-XDP-support.patch deleted file mode 100644 index 163632df51..0000000000 --- a/target/linux/mvebu/patches-5.10/006-net-mvneta-add-basic-XDP-support.patch +++ /dev/null @@ -1,311 +0,0 @@ -From 0db51da7a8e99f0803ec3a8e25c1a66234a219cb Mon Sep 17 00:00:00 2001 -From: Lorenzo Bianconi -Date: Sat, 19 Oct 2019 10:13:24 +0200 -Subject: [PATCH 4/7] net: mvneta: add basic XDP support - -Add basic XDP support to mvneta driver for devices that rely on software -buffer management. Currently supported verdicts are: -- XDP_DROP -- XDP_PASS -- XDP_REDIRECT -- XDP_ABORTED - -- iptables drop: -$iptables -t raw -I PREROUTING -p udp --dport 9 -j DROP -$nstat -n && sleep 1 && nstat -IpInReceives 151169 0.0 -IpExtInOctets 6953544 0.0 -IpExtInNoECTPkts 151165 0.0 - -- XDP_DROP via xdp1 -$./samples/bpf/xdp1 3 -proto 0: 421419 pkt/s -proto 0: 421444 pkt/s -proto 0: 421393 pkt/s -proto 0: 421440 pkt/s -proto 0: 421184 pkt/s - -Tested-by: Matteo Croce -Signed-off-by: Lorenzo Bianconi -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 148 ++++++++++++++++++++++++-- - 1 file changed, 139 insertions(+), 9 deletions(-) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -38,6 +38,7 @@ - #include - #include - #include -+#include - - /* Registers */ - #define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2)) -@@ -325,8 +326,10 @@ - ETH_HLEN + ETH_FCS_LEN, \ - cache_line_size()) - -+#define MVNETA_SKB_HEADROOM (max(XDP_PACKET_HEADROOM, NET_SKB_PAD) + \ -+ NET_IP_ALIGN) - #define MVNETA_SKB_PAD (SKB_DATA_ALIGN(sizeof(struct skb_shared_info) + \ -- NET_SKB_PAD)) -+ MVNETA_SKB_HEADROOM)) - #define MVNETA_SKB_SIZE(len) (SKB_DATA_ALIGN(len) + MVNETA_SKB_PAD) - #define MVNETA_MAX_RX_BUF_SIZE (PAGE_SIZE - MVNETA_SKB_PAD) - -@@ -354,6 +357,11 @@ struct mvneta_statistic { - #define T_REG_64 64 - #define T_SW 1 - -+#define MVNETA_XDP_PASS BIT(0) -+#define MVNETA_XDP_DROPPED BIT(1) -+#define MVNETA_XDP_TX BIT(2) -+#define MVNETA_XDP_REDIR BIT(3) -+ - static const struct mvneta_statistic mvneta_statistics[] = { - { 0x3000, T_REG_64, "good_octets_received", }, - { 0x3010, T_REG_32, "good_frames_received", }, -@@ -435,6 +443,8 @@ struct mvneta_port { - u32 cause_rx_tx; - struct napi_struct napi; - -+ struct bpf_prog *xdp_prog; -+ - /* Core clock */ - struct clk *clk; - /* AXI clock */ -@@ -1965,10 +1975,50 @@ int mvneta_rx_refill_queue(struct mvneta - } - - static int -+mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq, -+ struct bpf_prog *prog, struct xdp_buff *xdp) -+{ -+ u32 ret, act = bpf_prog_run_xdp(prog, xdp); -+ -+ switch (act) { -+ case XDP_PASS: -+ ret = MVNETA_XDP_PASS; -+ break; -+ case XDP_REDIRECT: { -+ int err; -+ -+ err = xdp_do_redirect(pp->dev, xdp, prog); -+ if (err) { -+ ret = MVNETA_XDP_DROPPED; -+ xdp_return_buff(xdp); -+ } else { -+ ret = MVNETA_XDP_REDIR; -+ } -+ break; -+ } -+ default: -+ bpf_warn_invalid_xdp_action(act); -+ /* fall through */ -+ case XDP_ABORTED: -+ trace_xdp_exception(pp->dev, prog, act); -+ /* fall through */ -+ case XDP_DROP: -+ page_pool_recycle_direct(rxq->page_pool, -+ virt_to_head_page(xdp->data)); -+ ret = MVNETA_XDP_DROPPED; -+ break; -+ } -+ -+ return ret; -+} -+ -+static int - mvneta_swbm_rx_frame(struct mvneta_port *pp, - struct mvneta_rx_desc *rx_desc, - struct mvneta_rx_queue *rxq, -- struct page *page) -+ struct xdp_buff *xdp, -+ struct bpf_prog *xdp_prog, -+ struct page *page, u32 *xdp_ret) - { - unsigned char *data = page_address(page); - int data_len = -MVNETA_MH_SIZE, len; -@@ -1988,7 +2038,26 @@ mvneta_swbm_rx_frame(struct mvneta_port - rx_desc->buf_phys_addr, - len, dma_dir); - -- rxq->skb = build_skb(data, PAGE_SIZE); -+ xdp->data_hard_start = data; -+ xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE; -+ xdp->data_end = xdp->data + data_len; -+ xdp_set_data_meta_invalid(xdp); -+ -+ if (xdp_prog) { -+ u32 ret; -+ -+ ret = mvneta_run_xdp(pp, rxq, xdp_prog, xdp); -+ if (ret != MVNETA_XDP_PASS) { -+ mvneta_update_stats(pp, 1, -+ xdp->data_end - xdp->data, -+ false); -+ rx_desc->buf_phys_addr = 0; -+ *xdp_ret |= ret; -+ return ret; -+ } -+ } -+ -+ rxq->skb = build_skb(xdp->data_hard_start, PAGE_SIZE); - if (unlikely(!rxq->skb)) { - netdev_err(dev, - "Can't allocate skb on queue %d\n", -@@ -1999,8 +2068,9 @@ mvneta_swbm_rx_frame(struct mvneta_port - } - page_pool_release_page(rxq->page_pool, page); - -- skb_reserve(rxq->skb, MVNETA_MH_SIZE + NET_SKB_PAD); -- skb_put(rxq->skb, data_len); -+ skb_reserve(rxq->skb, -+ xdp->data - xdp->data_hard_start); -+ skb_put(rxq->skb, xdp->data_end - xdp->data); - mvneta_rx_csum(pp, rx_desc->status, rxq->skb); - - rxq->left_size = rx_desc->data_size - len; -@@ -2034,7 +2104,7 @@ mvneta_swbm_add_rx_fragment(struct mvnet - /* refill descriptor with new buffer later */ - skb_add_rx_frag(rxq->skb, - skb_shinfo(rxq->skb)->nr_frags, -- page, NET_SKB_PAD, data_len, -+ page, MVNETA_SKB_HEADROOM, data_len, - PAGE_SIZE); - } - page_pool_release_page(rxq->page_pool, page); -@@ -2049,11 +2119,18 @@ static int mvneta_rx_swbm(struct napi_st - { - int rcvd_pkts = 0, rcvd_bytes = 0, rx_proc = 0; - struct net_device *dev = pp->dev; -+ struct bpf_prog *xdp_prog; -+ struct xdp_buff xdp_buf; - int rx_todo, refill; -+ u32 xdp_ret = 0; - - /* Get number of received packets */ - rx_todo = mvneta_rxq_busy_desc_num_get(pp, rxq); - -+ rcu_read_lock(); -+ xdp_prog = READ_ONCE(pp->xdp_prog); -+ xdp_buf.rxq = &rxq->xdp_rxq; -+ - /* Fairness NAPI loop */ - while (rx_proc < budget && rx_proc < rx_todo) { - struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq); -@@ -2081,7 +2158,8 @@ static int mvneta_rx_swbm(struct napi_st - continue; - } - -- err = mvneta_swbm_rx_frame(pp, rx_desc, rxq, page); -+ err = mvneta_swbm_rx_frame(pp, rx_desc, rxq, &xdp_buf, -+ xdp_prog, page, &xdp_ret); - if (err) - continue; - } else { -@@ -2116,6 +2194,10 @@ static int mvneta_rx_swbm(struct napi_st - /* clean uncomplete skb pointer in queue */ - rxq->skb = NULL; - } -+ rcu_read_unlock(); -+ -+ if (xdp_ret & MVNETA_XDP_REDIR) -+ xdp_do_flush_map(); - - if (rcvd_pkts) - mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false); -@@ -2857,13 +2939,14 @@ static int mvneta_poll(struct napi_struc - static int mvneta_create_page_pool(struct mvneta_port *pp, - struct mvneta_rx_queue *rxq, int size) - { -+ struct bpf_prog *xdp_prog = READ_ONCE(pp->xdp_prog); - struct page_pool_params pp_params = { - .order = 0, - .flags = PP_FLAG_DMA_MAP, - .pool_size = size, - .nid = cpu_to_node(0), - .dev = pp->dev->dev.parent, -- .dma_dir = DMA_FROM_DEVICE, -+ .dma_dir = xdp_prog ? DMA_BIDIRECTIONAL : DMA_FROM_DEVICE, - }; - int err; - -@@ -3364,6 +3447,11 @@ static int mvneta_change_mtu(struct net_ - mtu = ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8); - } - -+ if (pp->xdp_prog && mtu > MVNETA_MAX_RX_BUF_SIZE) { -+ netdev_info(dev, "Illegal MTU value %d for XDP mode\n", mtu); -+ return -EINVAL; -+ } -+ - dev->mtu = mtu; - - if (!netif_running(dev)) { -@@ -4029,6 +4117,47 @@ static int mvneta_ioctl(struct net_devic - return phylink_mii_ioctl(pp->phylink, ifr, cmd); - } - -+static int mvneta_xdp_setup(struct net_device *dev, struct bpf_prog *prog, -+ struct netlink_ext_ack *extack) -+{ -+ bool need_update, running = netif_running(dev); -+ struct mvneta_port *pp = netdev_priv(dev); -+ struct bpf_prog *old_prog; -+ -+ if (prog && dev->mtu > MVNETA_MAX_RX_BUF_SIZE) { -+ NL_SET_ERR_MSG_MOD(extack, "Jumbo frames not supported on XDP"); -+ return -EOPNOTSUPP; -+ } -+ -+ need_update = !!pp->xdp_prog != !!prog; -+ if (running && need_update) -+ mvneta_stop(dev); -+ -+ old_prog = xchg(&pp->xdp_prog, prog); -+ if (old_prog) -+ bpf_prog_put(old_prog); -+ -+ if (running && need_update) -+ return mvneta_open(dev); -+ -+ return 0; -+} -+ -+static int mvneta_xdp(struct net_device *dev, struct netdev_bpf *xdp) -+{ -+ struct mvneta_port *pp = netdev_priv(dev); -+ -+ switch (xdp->command) { -+ case XDP_SETUP_PROG: -+ return mvneta_xdp_setup(dev, xdp->prog, xdp->extack); -+ case XDP_QUERY_PROG: -+ xdp->prog_id = pp->xdp_prog ? pp->xdp_prog->aux->id : 0; -+ return 0; -+ default: -+ return -EINVAL; -+ } -+} -+ - /* Ethtool methods */ - - /* Set link ksettings (phy address, speed) for ethtools */ -@@ -4425,6 +4554,7 @@ static const struct net_device_ops mvnet - .ndo_fix_features = mvneta_fix_features, - .ndo_get_stats64 = mvneta_get_stats64, - .ndo_do_ioctl = mvneta_ioctl, -+ .ndo_bpf = mvneta_xdp, - }; - - static const struct ethtool_ops mvneta_eth_tool_ops = { -@@ -4713,7 +4843,7 @@ static int mvneta_probe(struct platform_ - SET_NETDEV_DEV(dev, &pdev->dev); - - pp->id = global_port_id++; -- pp->rx_offset_correction = NET_SKB_PAD; -+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM; - - /* Obtain access to BM resources if enabled and already initialized */ - bm_node = of_parse_phandle(dn, "buffer-manager", 0); diff --git a/target/linux/mvebu/patches-5.10/007-gpio-mvebu-avoid_error_message_for_optional_IRQ.patch b/target/linux/mvebu/patches-5.10/007-gpio-mvebu-avoid_error_message_for_optional_IRQ.patch deleted file mode 100644 index 00d2b30d58..0000000000 --- a/target/linux/mvebu/patches-5.10/007-gpio-mvebu-avoid_error_message_for_optional_IRQ.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 525b0858ff2fdb78defec2d4d6d63baaa423d5fd Mon Sep 17 00:00:00 2001 -From: Chris Packham -Date: Fri, 13 Mar 2020 16:42:44 +1300 -Subject: [PATCH] gpio: mvebu: avoid error message for optional IRQ - -platform_get_irq() will generate an error message if the requested irq -is not present - - mvebu-gpio f1010140.gpio: IRQ index 3 not found - -use platform_get_irq_optional() to avoid the error message being -generated. - -Signed-off-by: Chris Packham -Acked-by: Uwe Kleine-König -Signed-off-by: Bartosz Golaszewski ---- - drivers/gpio/gpio-mvebu.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/gpio/gpio-mvebu.c -+++ b/drivers/gpio/gpio-mvebu.c -@@ -1248,7 +1248,7 @@ static int mvebu_gpio_probe(struct platf - * pins. - */ - for (i = 0; i < 4; i++) { -- int irq = platform_get_irq(pdev, i); -+ int irq = platform_get_irq_optional(pdev, i); - - if (irq < 0) - continue; diff --git a/target/linux/mvebu/patches-5.10/007-net-mvneta-move-header-prefetch-in-mvneta_swbm_rx_fr.patch b/target/linux/mvebu/patches-5.10/007-net-mvneta-move-header-prefetch-in-mvneta_swbm_rx_fr.patch deleted file mode 100644 index e075796e41..0000000000 --- a/target/linux/mvebu/patches-5.10/007-net-mvneta-move-header-prefetch-in-mvneta_swbm_rx_fr.patch +++ /dev/null @@ -1,43 +0,0 @@ -From fa383f6b77a2ed788266fa8fbfb659aa284d2f58 Mon Sep 17 00:00:00 2001 -From: Lorenzo Bianconi -Date: Sat, 19 Oct 2019 10:13:25 +0200 -Subject: [PATCH 5/7] net: mvneta: move header prefetch in mvneta_swbm_rx_frame - -Move data buffer prefetch in mvneta_swbm_rx_frame after -dma_sync_single_range_for_cpu - -Signed-off-by: Ilias Apalodimas -Signed-off-by: Jesper Dangaard Brouer -Signed-off-by: Lorenzo Bianconi -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 7 +++---- - 1 file changed, 3 insertions(+), 4 deletions(-) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -2038,6 +2038,9 @@ mvneta_swbm_rx_frame(struct mvneta_port - rx_desc->buf_phys_addr, - len, dma_dir); - -+ /* Prefetch header */ -+ prefetch(data); -+ - xdp->data_hard_start = data; - xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE; - xdp->data_end = xdp->data + data_len; -@@ -2135,14 +2138,10 @@ static int mvneta_rx_swbm(struct napi_st - while (rx_proc < budget && rx_proc < rx_todo) { - struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq); - u32 rx_status, index; -- unsigned char *data; - struct page *page; - - index = rx_desc - rxq->descs; - page = (struct page *)rxq->buf_virt_addr[index]; -- data = page_address(page); -- /* Prefetch header */ -- prefetch(data); - - rx_status = rx_desc->status; - rx_proc++; diff --git a/target/linux/mvebu/patches-5.10/008-net-mvneta-make-tx-buffer-array-agnostic.patch b/target/linux/mvebu/patches-5.10/008-net-mvneta-make-tx-buffer-array-agnostic.patch deleted file mode 100644 index e79aa816b8..0000000000 --- a/target/linux/mvebu/patches-5.10/008-net-mvneta-make-tx-buffer-array-agnostic.patch +++ /dev/null @@ -1,210 +0,0 @@ -From 9e58c8b410650b5a6eb5b8fad8474bd8425a4023 Mon Sep 17 00:00:00 2001 -From: Lorenzo Bianconi -Date: Sat, 19 Oct 2019 10:13:26 +0200 -Subject: [PATCH 6/7] net: mvneta: make tx buffer array agnostic - -Allow tx buffer array to contain both skb and xdp buffers in order to -enable xdp frame recycling adding XDP_TX verdict support - -Signed-off-by: Lorenzo Bianconi -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 66 +++++++++++++++++---------- - 1 file changed, 43 insertions(+), 23 deletions(-) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -565,6 +565,20 @@ struct mvneta_rx_desc { - }; - #endif - -+enum mvneta_tx_buf_type { -+ MVNETA_TYPE_SKB, -+ MVNETA_TYPE_XDP_TX, -+ MVNETA_TYPE_XDP_NDO, -+}; -+ -+struct mvneta_tx_buf { -+ enum mvneta_tx_buf_type type; -+ union { -+ struct xdp_frame *xdpf; -+ struct sk_buff *skb; -+ }; -+}; -+ - struct mvneta_tx_queue { - /* Number of this TX queue, in the range 0-7 */ - u8 id; -@@ -580,8 +594,8 @@ struct mvneta_tx_queue { - int tx_stop_threshold; - int tx_wake_threshold; - -- /* Array of transmitted skb */ -- struct sk_buff **tx_skb; -+ /* Array of transmitted buffers */ -+ struct mvneta_tx_buf *buf; - - /* Index of last TX DMA descriptor that was inserted */ - int txq_put_index; -@@ -1793,14 +1807,9 @@ static void mvneta_txq_bufs_free(struct - int i; - - for (i = 0; i < num; i++) { -+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_get_index]; - struct mvneta_tx_desc *tx_desc = txq->descs + - txq->txq_get_index; -- struct sk_buff *skb = txq->tx_skb[txq->txq_get_index]; -- -- if (skb) { -- bytes_compl += skb->len; -- pkts_compl++; -- } - - mvneta_txq_inc_get(txq); - -@@ -1808,9 +1817,12 @@ static void mvneta_txq_bufs_free(struct - dma_unmap_single(pp->dev->dev.parent, - tx_desc->buf_phys_addr, - tx_desc->data_size, DMA_TO_DEVICE); -- if (!skb) -+ if (!buf->skb) - continue; -- dev_kfree_skb_any(skb); -+ -+ bytes_compl += buf->skb->len; -+ pkts_compl++; -+ dev_kfree_skb_any(buf->skb); - } - - netdev_tx_completed_queue(nq, pkts_compl, bytes_compl); -@@ -2335,16 +2347,19 @@ static inline void - mvneta_tso_put_hdr(struct sk_buff *skb, - struct mvneta_port *pp, struct mvneta_tx_queue *txq) - { -- struct mvneta_tx_desc *tx_desc; - int hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); -+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index]; -+ struct mvneta_tx_desc *tx_desc; - -- txq->tx_skb[txq->txq_put_index] = NULL; - tx_desc = mvneta_txq_next_desc_get(txq); - tx_desc->data_size = hdr_len; - tx_desc->command = mvneta_skb_tx_csum(pp, skb); - tx_desc->command |= MVNETA_TXD_F_DESC; - tx_desc->buf_phys_addr = txq->tso_hdrs_phys + - txq->txq_put_index * TSO_HEADER_SIZE; -+ buf->type = MVNETA_TYPE_SKB; -+ buf->skb = NULL; -+ - mvneta_txq_inc_put(txq); - } - -@@ -2353,6 +2368,7 @@ mvneta_tso_put_data(struct net_device *d - struct sk_buff *skb, char *data, int size, - bool last_tcp, bool is_last) - { -+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index]; - struct mvneta_tx_desc *tx_desc; - - tx_desc = mvneta_txq_next_desc_get(txq); -@@ -2366,7 +2382,8 @@ mvneta_tso_put_data(struct net_device *d - } - - tx_desc->command = 0; -- txq->tx_skb[txq->txq_put_index] = NULL; -+ buf->type = MVNETA_TYPE_SKB; -+ buf->skb = NULL; - - if (last_tcp) { - /* last descriptor in the TCP packet */ -@@ -2374,7 +2391,7 @@ mvneta_tso_put_data(struct net_device *d - - /* last descriptor in SKB */ - if (is_last) -- txq->tx_skb[txq->txq_put_index] = skb; -+ buf->skb = skb; - } - mvneta_txq_inc_put(txq); - return 0; -@@ -2459,6 +2476,7 @@ static int mvneta_tx_frag_process(struct - int i, nr_frags = skb_shinfo(skb)->nr_frags; - - for (i = 0; i < nr_frags; i++) { -+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index]; - skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - void *addr = skb_frag_address(frag); - -@@ -2478,12 +2496,13 @@ static int mvneta_tx_frag_process(struct - if (i == nr_frags - 1) { - /* Last descriptor */ - tx_desc->command = MVNETA_TXD_L_DESC | MVNETA_TXD_Z_PAD; -- txq->tx_skb[txq->txq_put_index] = skb; -+ buf->skb = skb; - } else { - /* Descriptor in the middle: Not First, Not Last */ - tx_desc->command = 0; -- txq->tx_skb[txq->txq_put_index] = NULL; -+ buf->skb = NULL; - } -+ buf->type = MVNETA_TYPE_SKB; - mvneta_txq_inc_put(txq); - } - -@@ -2511,6 +2530,7 @@ static netdev_tx_t mvneta_tx(struct sk_b - struct mvneta_port *pp = netdev_priv(dev); - u16 txq_id = skb_get_queue_mapping(skb); - struct mvneta_tx_queue *txq = &pp->txqs[txq_id]; -+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index]; - struct mvneta_tx_desc *tx_desc; - int len = skb->len; - int frags = 0; -@@ -2543,16 +2563,17 @@ static netdev_tx_t mvneta_tx(struct sk_b - goto out; - } - -+ buf->type = MVNETA_TYPE_SKB; - if (frags == 1) { - /* First and Last descriptor */ - tx_cmd |= MVNETA_TXD_FLZ_DESC; - tx_desc->command = tx_cmd; -- txq->tx_skb[txq->txq_put_index] = skb; -+ buf->skb = skb; - mvneta_txq_inc_put(txq); - } else { - /* First but not Last */ - tx_cmd |= MVNETA_TXD_F_DESC; -- txq->tx_skb[txq->txq_put_index] = NULL; -+ buf->skb = NULL; - mvneta_txq_inc_put(txq); - tx_desc->command = tx_cmd; - /* Continue with other skb fragments */ -@@ -3138,9 +3159,8 @@ static int mvneta_txq_sw_init(struct mvn - - txq->last_desc = txq->size - 1; - -- txq->tx_skb = kmalloc_array(txq->size, sizeof(*txq->tx_skb), -- GFP_KERNEL); -- if (!txq->tx_skb) { -+ txq->buf = kmalloc_array(txq->size, sizeof(*txq->buf), GFP_KERNEL); -+ if (!txq->buf) { - dma_free_coherent(pp->dev->dev.parent, - txq->size * MVNETA_DESC_ALIGNED_SIZE, - txq->descs, txq->descs_phys); -@@ -3152,7 +3172,7 @@ static int mvneta_txq_sw_init(struct mvn - txq->size * TSO_HEADER_SIZE, - &txq->tso_hdrs_phys, GFP_KERNEL); - if (!txq->tso_hdrs) { -- kfree(txq->tx_skb); -+ kfree(txq->buf); - dma_free_coherent(pp->dev->dev.parent, - txq->size * MVNETA_DESC_ALIGNED_SIZE, - txq->descs, txq->descs_phys); -@@ -3205,7 +3225,7 @@ static void mvneta_txq_sw_deinit(struct - { - struct netdev_queue *nq = netdev_get_tx_queue(pp->dev, txq->id); - -- kfree(txq->tx_skb); -+ kfree(txq->buf); - - if (txq->tso_hdrs) - dma_free_coherent(pp->dev->dev.parent, diff --git a/target/linux/mvebu/patches-5.10/009-net-mvneta-add-XDP_TX-support.patch b/target/linux/mvebu/patches-5.10/009-net-mvneta-add-XDP_TX-support.patch deleted file mode 100644 index c971030a1e..0000000000 --- a/target/linux/mvebu/patches-5.10/009-net-mvneta-add-XDP_TX-support.patch +++ /dev/null @@ -1,175 +0,0 @@ -From b0a43db9087a21d96e1a0b716b8d9963064b2d58 Mon Sep 17 00:00:00 2001 -From: Lorenzo Bianconi -Date: Sat, 19 Oct 2019 10:13:27 +0200 -Subject: [PATCH 7/7] net: mvneta: add XDP_TX support - -Implement XDP_TX verdict and ndo_xdp_xmit net_device_ops function -pointer - -Signed-off-by: Lorenzo Bianconi -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 128 ++++++++++++++++++++++++-- - 1 file changed, 121 insertions(+), 7 deletions(-) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -1813,16 +1813,19 @@ static void mvneta_txq_bufs_free(struct - - mvneta_txq_inc_get(txq); - -- if (!IS_TSO_HEADER(txq, tx_desc->buf_phys_addr)) -+ if (!IS_TSO_HEADER(txq, tx_desc->buf_phys_addr) && -+ buf->type != MVNETA_TYPE_XDP_TX) - dma_unmap_single(pp->dev->dev.parent, - tx_desc->buf_phys_addr, - tx_desc->data_size, DMA_TO_DEVICE); -- if (!buf->skb) -- continue; -- -- bytes_compl += buf->skb->len; -- pkts_compl++; -- dev_kfree_skb_any(buf->skb); -+ if (buf->type == MVNETA_TYPE_SKB && buf->skb) { -+ bytes_compl += buf->skb->len; -+ pkts_compl++; -+ dev_kfree_skb_any(buf->skb); -+ } else if (buf->type == MVNETA_TYPE_XDP_TX || -+ buf->type == MVNETA_TYPE_XDP_NDO) { -+ xdp_return_frame(buf->xdpf); -+ } - } - - netdev_tx_completed_queue(nq, pkts_compl, bytes_compl); -@@ -1987,6 +1990,111 @@ int mvneta_rx_refill_queue(struct mvneta - } - - static int -+mvneta_xdp_submit_frame(struct mvneta_port *pp, struct mvneta_tx_queue *txq, -+ struct xdp_frame *xdpf, bool dma_map) -+{ -+ struct mvneta_tx_desc *tx_desc; -+ struct mvneta_tx_buf *buf; -+ dma_addr_t dma_addr; -+ -+ if (txq->count >= txq->tx_stop_threshold) -+ return MVNETA_XDP_DROPPED; -+ -+ tx_desc = mvneta_txq_next_desc_get(txq); -+ -+ buf = &txq->buf[txq->txq_put_index]; -+ if (dma_map) { -+ /* ndo_xdp_xmit */ -+ dma_addr = dma_map_single(pp->dev->dev.parent, xdpf->data, -+ xdpf->len, DMA_TO_DEVICE); -+ if (dma_mapping_error(pp->dev->dev.parent, dma_addr)) { -+ mvneta_txq_desc_put(txq); -+ return MVNETA_XDP_DROPPED; -+ } -+ buf->type = MVNETA_TYPE_XDP_NDO; -+ } else { -+ struct page *page = virt_to_page(xdpf->data); -+ -+ dma_addr = page_pool_get_dma_addr(page) + -+ sizeof(*xdpf) + xdpf->headroom; -+ dma_sync_single_for_device(pp->dev->dev.parent, dma_addr, -+ xdpf->len, DMA_BIDIRECTIONAL); -+ buf->type = MVNETA_TYPE_XDP_TX; -+ } -+ buf->xdpf = xdpf; -+ -+ tx_desc->command = MVNETA_TXD_FLZ_DESC; -+ tx_desc->buf_phys_addr = dma_addr; -+ tx_desc->data_size = xdpf->len; -+ -+ mvneta_update_stats(pp, 1, xdpf->len, true); -+ mvneta_txq_inc_put(txq); -+ txq->pending++; -+ txq->count++; -+ -+ return MVNETA_XDP_TX; -+} -+ -+static int -+mvneta_xdp_xmit_back(struct mvneta_port *pp, struct xdp_buff *xdp) -+{ -+ struct mvneta_tx_queue *txq; -+ struct netdev_queue *nq; -+ struct xdp_frame *xdpf; -+ int cpu; -+ u32 ret; -+ -+ xdpf = convert_to_xdp_frame(xdp); -+ if (unlikely(!xdpf)) -+ return MVNETA_XDP_DROPPED; -+ -+ cpu = smp_processor_id(); -+ txq = &pp->txqs[cpu % txq_number]; -+ nq = netdev_get_tx_queue(pp->dev, txq->id); -+ -+ __netif_tx_lock(nq, cpu); -+ ret = mvneta_xdp_submit_frame(pp, txq, xdpf, false); -+ if (ret == MVNETA_XDP_TX) -+ mvneta_txq_pend_desc_add(pp, txq, 0); -+ __netif_tx_unlock(nq); -+ -+ return ret; -+} -+ -+static int -+mvneta_xdp_xmit(struct net_device *dev, int num_frame, -+ struct xdp_frame **frames, u32 flags) -+{ -+ struct mvneta_port *pp = netdev_priv(dev); -+ int cpu = smp_processor_id(); -+ struct mvneta_tx_queue *txq; -+ struct netdev_queue *nq; -+ int i, drops = 0; -+ u32 ret; -+ -+ if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK)) -+ return -EINVAL; -+ -+ txq = &pp->txqs[cpu % txq_number]; -+ nq = netdev_get_tx_queue(pp->dev, txq->id); -+ -+ __netif_tx_lock(nq, cpu); -+ for (i = 0; i < num_frame; i++) { -+ ret = mvneta_xdp_submit_frame(pp, txq, frames[i], true); -+ if (ret != MVNETA_XDP_TX) { -+ xdp_return_frame_rx_napi(frames[i]); -+ drops++; -+ } -+ } -+ -+ if (unlikely(flags & XDP_XMIT_FLUSH)) -+ mvneta_txq_pend_desc_add(pp, txq, 0); -+ __netif_tx_unlock(nq); -+ -+ return num_frame - drops; -+} -+ -+static int - mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq, - struct bpf_prog *prog, struct xdp_buff *xdp) - { -@@ -2008,6 +2116,11 @@ mvneta_run_xdp(struct mvneta_port *pp, s - } - break; - } -+ case XDP_TX: -+ ret = mvneta_xdp_xmit_back(pp, xdp); -+ if (ret != MVNETA_XDP_TX) -+ xdp_return_buff(xdp); -+ break; - default: - bpf_warn_invalid_xdp_action(act); - /* fall through */ -@@ -4574,6 +4687,7 @@ static const struct net_device_ops mvnet - .ndo_get_stats64 = mvneta_get_stats64, - .ndo_do_ioctl = mvneta_ioctl, - .ndo_bpf = mvneta_xdp, -+ .ndo_xdp_xmit = mvneta_xdp_xmit, - }; - - static const struct ethtool_ops mvneta_eth_tool_ops = { diff --git a/target/linux/mvebu/patches-5.10/010-net-mvneta-fix-build-skb-for-bm-capable-devices.patch b/target/linux/mvebu/patches-5.10/010-net-mvneta-fix-build-skb-for-bm-capable-devices.patch deleted file mode 100644 index adfa51e4e8..0000000000 --- a/target/linux/mvebu/patches-5.10/010-net-mvneta-fix-build-skb-for-bm-capable-devices.patch +++ /dev/null @@ -1,41 +0,0 @@ -From b37fa92e20ef28aada852cbf03b368d29a20478c Mon Sep 17 00:00:00 2001 -From: Lorenzo Bianconi -Date: Thu, 14 Nov 2019 01:25:55 +0200 -Subject: [PATCH] net: mvneta: fix build skb for bm capable devices - -Fix build_skb for bm capable devices when they fall-back using swbm path -(e.g. when bm properties are configured in device tree but -CONFIG_MVNETA_BM_ENABLE is not set). In this case rx_offset_correction is -overwritten so we need to use it building skb instead of -MVNETA_SKB_HEADROOM directly - -Fixes: 8dc9a0888f4c ("net: mvneta: rely on build_skb in mvneta_rx_swbm poll routine") -Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support") -Signed-off-by: Lorenzo Bianconi -Reported-by: Andrew Lunn -Tested-by: Andrew Lunn -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -2167,7 +2167,7 @@ mvneta_swbm_rx_frame(struct mvneta_port - prefetch(data); - - xdp->data_hard_start = data; -- xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE; -+ xdp->data = data + pp->rx_offset_correction + MVNETA_MH_SIZE; - xdp->data_end = xdp->data + data_len; - xdp_set_data_meta_invalid(xdp); - -@@ -2232,7 +2232,7 @@ mvneta_swbm_add_rx_fragment(struct mvnet - /* refill descriptor with new buffer later */ - skb_add_rx_frag(rxq->skb, - skb_shinfo(rxq->skb)->nr_frags, -- page, MVNETA_SKB_HEADROOM, data_len, -+ page, pp->rx_offset_correction, data_len, - PAGE_SIZE); - } - page_pool_release_page(rxq->page_pool, page); diff --git a/target/linux/mvebu/patches-5.10/011-arm64-dts-uDPU-remove-i2c-fast-mode.patch b/target/linux/mvebu/patches-5.10/011-arm64-dts-uDPU-remove-i2c-fast-mode.patch deleted file mode 100644 index 2922d49f44..0000000000 --- a/target/linux/mvebu/patches-5.10/011-arm64-dts-uDPU-remove-i2c-fast-mode.patch +++ /dev/null @@ -1,31 +0,0 @@ -From fe3ec631a77ded87817f449691710a436a80caa7 Mon Sep 17 00:00:00 2001 -From: Russell King -Date: Sat, 16 Nov 2019 11:07:01 +0000 -Subject: [PATCH] arm64: dts: uDPU: remove i2c-fast-mode - -The I2C bus violates the timing specifications when run in fast mode -on the uDPU, so switch to 100kHz mode. - -Signed-off-by: Russell King -Signed-off-by: Gregory CLEMENT ---- - arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts -@@ -119,12 +119,14 @@ - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; -+ /delete-property/mrvl,i2c-fast-mode; - }; - - &i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; -+ /delete-property/mrvl,i2c-fast-mode; - - lm75@48 { - status = "okay"; diff --git a/target/linux/mvebu/patches-5.10/012-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch b/target/linux/mvebu/patches-5.10/012-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch deleted file mode 100644 index 1884def2c6..0000000000 --- a/target/linux/mvebu/patches-5.10/012-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch +++ /dev/null @@ -1,34 +0,0 @@ -From cd592187f9de3c6305d6c1c66f7fac084cb5b846 Mon Sep 17 00:00:00 2001 -From: Russell King -Date: Tue, 19 Nov 2019 22:53:04 +0000 -Subject: [PATCH] arm64: dts: uDPU: SFP cages support 3W modules - -The SFP cages are designed to support up to 3W modules, such as G.hn, -G.fast and MoCA modules. Although there is no way for such modules to -declare to software that they consume 3W, we document in DT that this -is the designed power level for these cages. - -Signed-off-by: Russell King -Signed-off-by: Gregory CLEMENT ---- - arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts -@@ -69,6 +69,7 @@ - mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; -+ maximum-power-milliwatt = <3000>; - }; - - sfp_eth1: sfp-eth1 { -@@ -78,6 +79,7 @@ - mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; -+ maximum-power-milliwatt = <3000>; - }; - }; - diff --git a/target/linux/mvebu/patches-5.10/013-net-mvneta-rely-on-page_pool_recycle_direct-in-mvnet.patch b/target/linux/mvebu/patches-5.10/013-net-mvneta-rely-on-page_pool_recycle_direct-in-mvnet.patch deleted file mode 100644 index 6e79aeb358..0000000000 --- a/target/linux/mvebu/patches-5.10/013-net-mvneta-rely-on-page_pool_recycle_direct-in-mvnet.patch +++ /dev/null @@ -1,39 +0,0 @@ -From f383b2950070ce4f34e74db94f70bb565b746e97 Mon Sep 17 00:00:00 2001 -From: Lorenzo Bianconi -Date: Wed, 20 Nov 2019 16:54:17 +0200 -Subject: [PATCH] net: mvneta: rely on page_pool_recycle_direct in - mvneta_run_xdp - -Rely on page_pool_recycle_direct and not on xdp_return_buff in -mvneta_run_xdp. This is a preliminary patch to limit the dma sync len -to the one strictly necessary - -Signed-off-by: Lorenzo Bianconi -Acked-by: Jesper Dangaard Brouer -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -2110,7 +2110,8 @@ mvneta_run_xdp(struct mvneta_port *pp, s - err = xdp_do_redirect(pp->dev, xdp, prog); - if (err) { - ret = MVNETA_XDP_DROPPED; -- xdp_return_buff(xdp); -+ page_pool_recycle_direct(rxq->page_pool, -+ virt_to_head_page(xdp->data)); - } else { - ret = MVNETA_XDP_REDIR; - } -@@ -2119,7 +2120,8 @@ mvneta_run_xdp(struct mvneta_port *pp, s - case XDP_TX: - ret = mvneta_xdp_xmit_back(pp, xdp); - if (ret != MVNETA_XDP_TX) -- xdp_return_buff(xdp); -+ page_pool_recycle_direct(rxq->page_pool, -+ virt_to_head_page(xdp->data)); - break; - default: - bpf_warn_invalid_xdp_action(act); diff --git a/target/linux/mvebu/patches-5.10/014-mvneta-driver-disallow-XDP-program-on-hardware-buffe.patch b/target/linux/mvebu/patches-5.10/014-mvneta-driver-disallow-XDP-program-on-hardware-buffe.patch deleted file mode 100644 index e8a41d9eb2..0000000000 --- a/target/linux/mvebu/patches-5.10/014-mvneta-driver-disallow-XDP-program-on-hardware-buffe.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 79572c98c554dcdb080bca547c871a51716dcdf8 Mon Sep 17 00:00:00 2001 -From: Sven Auhagen -Date: Sat, 25 Jan 2020 08:07:03 +0000 -Subject: [PATCH] mvneta driver disallow XDP program on hardware buffer - management - -Recently XDP Support was added to the mvneta driver -for software buffer management only. -It is still possible to attach an XDP program if -hardware buffer management is used. -It is not doing anything at that point. - -The patch disallows attaching XDP programs to mvneta -if hardware buffer management is used. - -I am sorry about that. It is my first submission and I am having -some troubles with the format of my emails. - -v4 -> v5: -- Remove extra tabs - -v3 -> v4: -- Please ignore v3 I accidentally submitted - my other patch with git-send-mail and v4 is correct - -v2 -> v3: -- My mailserver corrupted the patch - resubmission with git-send-email - -v1 -> v2: -- Fixing the patches indentation - -Signed-off-by: Sven Auhagen -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -4263,6 +4263,12 @@ static int mvneta_xdp_setup(struct net_d - return -EOPNOTSUPP; - } - -+ if (pp->bm_priv) { -+ NL_SET_ERR_MSG_MOD(extack, -+ "Hardware Buffer Management not supported on XDP"); -+ return -EOPNOTSUPP; -+ } -+ - need_update = !!pp->xdp_prog != !!prog; - if (running && need_update) - mvneta_stop(dev); diff --git a/target/linux/mvebu/patches-5.10/015-net-mvneta-fix-XDP-support-if-sw-bm-is-used-as-fallb.patch b/target/linux/mvebu/patches-5.10/015-net-mvneta-fix-XDP-support-if-sw-bm-is-used-as-fallb.patch deleted file mode 100644 index 86bffa538a..0000000000 --- a/target/linux/mvebu/patches-5.10/015-net-mvneta-fix-XDP-support-if-sw-bm-is-used-as-fallb.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 44efc78d0e464ce70b45b165c005f8bedc17952e Mon Sep 17 00:00:00 2001 -From: Lorenzo Bianconi -Date: Wed, 29 Jan 2020 12:50:53 +0100 -Subject: [PATCH] net: mvneta: fix XDP support if sw bm is used as fallback - -In order to fix XDP support if sw buffer management is used as fallback -for hw bm devices, define MVNETA_SKB_HEADROOM as maximum between -XDP_PACKET_HEADROOM and NET_SKB_PAD and let the hw aligns the IP header -to 4-byte boundary. -Fix rx_offset_correction initialization if mvneta_bm_port_init fails in -mvneta_resume routine - -Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support") -Tested-by: Sven Auhagen -Signed-off-by: Lorenzo Bianconi -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 10 +++++++--- - 1 file changed, 7 insertions(+), 3 deletions(-) - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -326,8 +326,7 @@ - ETH_HLEN + ETH_FCS_LEN, \ - cache_line_size()) - --#define MVNETA_SKB_HEADROOM (max(XDP_PACKET_HEADROOM, NET_SKB_PAD) + \ -- NET_IP_ALIGN) -+#define MVNETA_SKB_HEADROOM max(XDP_PACKET_HEADROOM, NET_SKB_PAD) - #define MVNETA_SKB_PAD (SKB_DATA_ALIGN(sizeof(struct skb_shared_info) + \ - MVNETA_SKB_HEADROOM)) - #define MVNETA_SKB_SIZE(len) (SKB_DATA_ALIGN(len) + MVNETA_SKB_PAD) -@@ -1174,6 +1173,7 @@ bm_mtu_err: - mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short, 1 << pp->id); - - pp->bm_priv = NULL; -+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM; - mvreg_write(pp, MVNETA_ACC_MODE, MVNETA_ACC_MODE_EXT1); - netdev_info(pp->dev, "fail to update MTU, fall back to software BM\n"); - } -@@ -4984,7 +4984,6 @@ static int mvneta_probe(struct platform_ - SET_NETDEV_DEV(dev, &pdev->dev); - - pp->id = global_port_id++; -- pp->rx_offset_correction = MVNETA_SKB_HEADROOM; - - /* Obtain access to BM resources if enabled and already initialized */ - bm_node = of_parse_phandle(dn, "buffer-manager", 0); -@@ -5009,6 +5008,10 @@ static int mvneta_probe(struct platform_ - } - of_node_put(bm_node); - -+ /* sw buffer management */ -+ if (!pp->bm_priv) -+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM; -+ - err = mvneta_init(&pdev->dev, pp); - if (err < 0) - goto err_netdev; -@@ -5166,6 +5169,7 @@ static int mvneta_resume(struct device * - err = mvneta_bm_port_init(pdev, pp); - if (err < 0) { - dev_info(&pdev->dev, "use SW buffer management\n"); -+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM; - pp->bm_priv = NULL; - } - } diff --git a/target/linux/mvebu/patches-5.10/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch b/target/linux/mvebu/patches-5.10/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch deleted file mode 100644 index c9e49ac2f1..0000000000 --- a/target/linux/mvebu/patches-5.10/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 6964494582f56a3882c2c53b0edbfe99eb32b2e1 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Thu, 30 Apr 2020 10:06:14 +0200 -Subject: [PATCH] PCI: aardvark: Train link immediately after enabling training -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link -training and starting link training causes detection issues with some -buggy cards (such as Compex WLE900VX). - -Move the code which enables link training immediately before the one -which starts link traning. - -This fixes detection issues of Compex WLE900VX card on Turris MOX after -cold boot. - -Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@kernel.org -Fixes: f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready...") -Tested-by: Tomasz Maciej Nowak -Signed-off-by: Pali Rohár -Signed-off-by: Lorenzo Pieralisi -Acked-by: Rob Herring -Acked-by: Thomas Petazzoni ---- - drivers/pci/controller/pci-aardvark.c | 15 +++++++++------ - 1 file changed, 9 insertions(+), 6 deletions(-) - ---- a/drivers/pci/controller/pci-aardvark.c -+++ b/drivers/pci/controller/pci-aardvark.c -@@ -300,11 +300,6 @@ static void advk_pcie_setup_hw(struct ad - reg |= LANE_COUNT_1; - advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); - -- /* Enable link training */ -- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); -- reg |= LINK_TRAINING_EN; -- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); -- - /* Enable MSI */ - reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG); - reg |= PCIE_CORE_CTRL2_MSI_ENABLE; -@@ -346,7 +341,15 @@ static void advk_pcie_setup_hw(struct ad - */ - msleep(PCI_PM_D3COLD_WAIT); - -- /* Start link training */ -+ /* Enable link training */ -+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); -+ reg |= LINK_TRAINING_EN; -+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); -+ -+ /* -+ * Start link training immediately after enabling it. -+ * This solves problems for some buggy cards. -+ */ - reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG); - reg |= PCIE_CORE_LINK_TRAINING; - advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG); diff --git a/target/linux/mvebu/patches-5.10/017-PCI-aardvark-Improve-link-training.patch b/target/linux/mvebu/patches-5.10/017-PCI-aardvark-Improve-link-training.patch deleted file mode 100644 index 2bf838432f..0000000000 --- a/target/linux/mvebu/patches-5.10/017-PCI-aardvark-Improve-link-training.patch +++ /dev/null @@ -1,208 +0,0 @@ -From 43fc679ced18006b12d918d7a8a4af392b7fbfe7 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= -Date: Thu, 30 Apr 2020 10:06:17 +0200 -Subject: [PATCH] PCI: aardvark: Improve link training -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Currently the aardvark driver trains link in PCIe gen2 mode. This may -cause some buggy gen1 cards (such as Compex WLE900VX) to be unstable or -even not detected. Moreover when ASPM code tries to retrain link second -time, these cards may stop responding and link goes down. If gen1 is -used this does not happen. - -Unconditionally forcing gen1 is not a good solution since it may have -performance impact on gen2 cards. - -To overcome this, read 'max-link-speed' property (as defined in PCI -device tree bindings) and use this as max gen mode. Then iteratively try -link training at this mode or lower until successful. After successful -link training choose final controller gen based on Negotiated Link Speed -from Link Status register, which should match card speed. - -Link: https://lore.kernel.org/r/20200430080625.26070-5-pali@kernel.org -Tested-by: Tomasz Maciej Nowak -Signed-off-by: Pali Rohár -Signed-off-by: Marek Behún -Signed-off-by: Lorenzo Pieralisi -Reviewed-by: Rob Herring -Acked-by: Thomas Petazzoni ---- - drivers/pci/controller/pci-aardvark.c | 114 ++++++++++++++++++++------ - 1 file changed, 89 insertions(+), 25 deletions(-) - ---- a/drivers/pci/controller/pci-aardvark.c -+++ b/drivers/pci/controller/pci-aardvark.c -@@ -39,6 +39,7 @@ - #define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0 - #define PCIE_CORE_LINK_L0S_ENTRY BIT(0) - #define PCIE_CORE_LINK_TRAINING BIT(5) -+#define PCIE_CORE_LINK_SPEED_SHIFT 16 - #define PCIE_CORE_LINK_WIDTH_SHIFT 20 - #define PCIE_CORE_ERR_CAPCTL_REG 0x118 - #define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5) -@@ -201,6 +202,7 @@ struct advk_pcie { - struct mutex msi_used_lock; - u16 msi_msg; - int root_bus_nr; -+ int link_gen; - struct pci_bridge_emul bridge; - }; - -@@ -225,20 +227,16 @@ static int advk_pcie_link_up(struct advk - - static int advk_pcie_wait_for_link(struct advk_pcie *pcie) - { -- struct device *dev = &pcie->pdev->dev; - int retries; - - /* check if the link is up or not */ - for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) { -- if (advk_pcie_link_up(pcie)) { -- dev_info(dev, "link up\n"); -+ if (advk_pcie_link_up(pcie)) - return 0; -- } - - usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX); - } - -- dev_err(dev, "link never came up\n"); - return -ETIMEDOUT; - } - -@@ -253,6 +251,85 @@ static void advk_pcie_wait_for_retrain(s - } - } - -+static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen) -+{ -+ int ret, neg_gen; -+ u32 reg; -+ -+ /* Setup link speed */ -+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); -+ reg &= ~PCIE_GEN_SEL_MSK; -+ if (gen == 3) -+ reg |= SPEED_GEN_3; -+ else if (gen == 2) -+ reg |= SPEED_GEN_2; -+ else -+ reg |= SPEED_GEN_1; -+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); -+ -+ /* -+ * Enable link training. This is not needed in every call to this -+ * function, just once suffices, but it does not break anything either. -+ */ -+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); -+ reg |= LINK_TRAINING_EN; -+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); -+ -+ /* -+ * Start link training immediately after enabling it. -+ * This solves problems for some buggy cards. -+ */ -+ reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG); -+ reg |= PCIE_CORE_LINK_TRAINING; -+ advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG); -+ -+ ret = advk_pcie_wait_for_link(pcie); -+ if (ret) -+ return ret; -+ -+ reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG); -+ neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf; -+ -+ return neg_gen; -+} -+ -+static void advk_pcie_train_link(struct advk_pcie *pcie) -+{ -+ struct device *dev = &pcie->pdev->dev; -+ int neg_gen = -1, gen; -+ -+ /* -+ * Try link training at link gen specified by device tree property -+ * 'max-link-speed'. If this fails, iteratively train at lower gen. -+ */ -+ for (gen = pcie->link_gen; gen > 0; --gen) { -+ neg_gen = advk_pcie_train_at_gen(pcie, gen); -+ if (neg_gen > 0) -+ break; -+ } -+ -+ if (neg_gen < 0) -+ goto err; -+ -+ /* -+ * After successful training if negotiated gen is lower than requested, -+ * train again on negotiated gen. This solves some stability issues for -+ * some buggy gen1 cards. -+ */ -+ if (neg_gen < gen) { -+ gen = neg_gen; -+ neg_gen = advk_pcie_train_at_gen(pcie, gen); -+ } -+ -+ if (neg_gen == gen) { -+ dev_info(dev, "link up at gen %i\n", gen); -+ return; -+ } -+ -+err: -+ dev_err(dev, "link never came up\n"); -+} -+ - static void advk_pcie_setup_hw(struct advk_pcie *pcie) - { - u32 reg; -@@ -288,12 +365,6 @@ static void advk_pcie_setup_hw(struct ad - PCIE_CORE_CTRL2_TD_ENABLE; - advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG); - -- /* Set GEN2 */ -- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); -- reg &= ~PCIE_GEN_SEL_MSK; -- reg |= SPEED_GEN_2; -- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); -- - /* Set lane X1 */ - reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); - reg &= ~LANE_CNT_MSK; -@@ -341,20 +412,7 @@ static void advk_pcie_setup_hw(struct ad - */ - msleep(PCI_PM_D3COLD_WAIT); - -- /* Enable link training */ -- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); -- reg |= LINK_TRAINING_EN; -- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); -- -- /* -- * Start link training immediately after enabling it. -- * This solves problems for some buggy cards. -- */ -- reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG); -- reg |= PCIE_CORE_LINK_TRAINING; -- advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG); -- -- advk_pcie_wait_for_link(pcie); -+ advk_pcie_train_link(pcie); - - reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG); - reg |= PCIE_CORE_CMD_MEM_ACCESS_EN | -@@ -1035,6 +1093,12 @@ static int advk_pcie_probe(struct platfo - return ret; - } - -+ ret = of_pci_get_max_link_speed(dev->of_node); -+ if (ret <= 0 || ret > 3) -+ pcie->link_gen = 3; -+ else -+ pcie->link_gen = ret; -+ - advk_pcie_setup_hw(pcie); - - ret = advk_sw_pci_bridge_init(pcie); diff --git a/target/linux/mvebu/patches-5.10/018-PCI-aardvark-Issue-PERST-via-GPIO.patch b/target/linux/mvebu/patches-5.10/018-PCI-aardvark-Issue-PERST-via-GPIO.patch deleted file mode 100644 index 83212ec475..0000000000 --- a/target/linux/mvebu/patches-5.10/018-PCI-aardvark-Issue-PERST-via-GPIO.patch +++ /dev/null @@ -1,123 +0,0 @@ -From 5169a9851daaa2782a7bd2bb83d5b1bd224b2879 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Thu, 30 Apr 2020 10:06:18 +0200 -Subject: [PATCH] PCI: aardvark: Issue PERST via GPIO -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add support for issuing PERST via GPIO specified in 'reset-gpios' -property (as described in PCI device tree bindings). - -Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected -after reboot when PERST is not issued during driver initialization. - -If bootloader already enabled link training then issuing PERST has no -effect for some buggy cards (e.g. Compex WLE900VX) and these cards are -not detected. We therefore clear the LINK_TRAINING_EN register before. - -It was observed that Compex WLE900VX card needs to be in PERST reset -for at least 10ms if bootloader enabled link training. - -Tested on Turris MOX. - -Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org -Tested-by: Tomasz Maciej Nowak -Signed-off-by: Pali Rohár -Signed-off-by: Lorenzo Pieralisi -Acked-by: Thomas Petazzoni ---- - drivers/pci/controller/pci-aardvark.c | 43 ++++++++++++++++++++++++++- - 1 file changed, 42 insertions(+), 1 deletion(-) - ---- a/drivers/pci/controller/pci-aardvark.c -+++ b/drivers/pci/controller/pci-aardvark.c -@@ -9,6 +9,7 @@ - */ - - #include -+#include - #include - #include - #include -@@ -17,6 +18,7 @@ - #include - #include - #include -+#include - #include - - #include "../pci.h" -@@ -204,6 +206,7 @@ struct advk_pcie { - int root_bus_nr; - int link_gen; - struct pci_bridge_emul bridge; -+ struct gpio_desc *reset_gpio; - }; - - static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg) -@@ -330,10 +333,31 @@ err: - dev_err(dev, "link never came up\n"); - } - -+static void advk_pcie_issue_perst(struct advk_pcie *pcie) -+{ -+ u32 reg; -+ -+ if (!pcie->reset_gpio) -+ return; -+ -+ /* PERST does not work for some cards when link training is enabled */ -+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); -+ reg &= ~LINK_TRAINING_EN; -+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); -+ -+ /* 10ms delay is needed for some cards */ -+ dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n"); -+ gpiod_set_value_cansleep(pcie->reset_gpio, 1); -+ usleep_range(10000, 11000); -+ gpiod_set_value_cansleep(pcie->reset_gpio, 0); -+} -+ - static void advk_pcie_setup_hw(struct advk_pcie *pcie) - { - u32 reg; - -+ advk_pcie_issue_perst(pcie); -+ - /* Set to Direct mode */ - reg = advk_readl(pcie, CTRL_CONFIG_REG); - reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT); -@@ -406,7 +430,8 @@ static void advk_pcie_setup_hw(struct ad - - /* - * PERST# signal could have been asserted by pinctrl subsystem before -- * probe() callback has been called, making the endpoint going into -+ * probe() callback has been called or issued explicitly by reset gpio -+ * function advk_pcie_issue_perst(), making the endpoint going into - * fundamental reset. As required by PCI Express spec a delay for at - * least 100ms after such a reset before link training is needed. - */ -@@ -1093,6 +1118,22 @@ static int advk_pcie_probe(struct platfo - return ret; - } - -+ pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node, -+ "reset-gpios", 0, -+ GPIOD_OUT_LOW, -+ "pcie1-reset"); -+ ret = PTR_ERR_OR_ZERO(pcie->reset_gpio); -+ if (ret) { -+ if (ret == -ENOENT) { -+ pcie->reset_gpio = NULL; -+ } else { -+ if (ret != -EPROBE_DEFER) -+ dev_err(dev, "Failed to get reset-gpio: %i\n", -+ ret); -+ return ret; -+ } -+ } -+ - ret = of_pci_get_max_link_speed(dev->of_node); - if (ret <= 0 || ret > 3) - pcie->link_gen = 3; diff --git a/target/linux/mvebu/patches-5.10/019-PCI-aardvark-Add-PHY-support.patch b/target/linux/mvebu/patches-5.10/019-PCI-aardvark-Add-PHY-support.patch deleted file mode 100644 index fa04861e80..0000000000 --- a/target/linux/mvebu/patches-5.10/019-PCI-aardvark-Add-PHY-support.patch +++ /dev/null @@ -1,152 +0,0 @@ -From 366697018c9a2aa67d457bfdc495115cface6ae8 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= -Date: Thu, 30 Apr 2020 10:06:20 +0200 -Subject: [PATCH] PCI: aardvark: Add PHY support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -With recent proposed changes for U-Boot it is possible that bootloader -won't initialize the PHY for this controller (currently the PHY is -initialized regardless whether PCI is used in U-Boot, but with these -proposed changes the PHY is initialized only on request). - -Since the mvebu-a3700-comphy driver by Miquèl Raynal supports enabling -PCIe PHY, and since Linux' functionality should be independent on what -bootloader did, add code for enabling generic PHY if found in device OF -node. - -The mvebu-a3700-comphy driver does PHY powering via SMC calls to ARM -Trusted Firmware. The corresponding code in ARM Trusted Firmware skips -one register write which U-Boot does not: step 7 ("Enable TX"), see [1]. -Instead ARM Trusted Firmware expects PCIe driver to do this step, -probably because the register is in PCIe controller address space, -instead of PHY address space. We therefore add this step into the -advk_pcie_setup_hw function. - -[1] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/drivers/marvell/comphy/phy-comphy-3700.c?h=v2.3-rc2#n836 - -Link: https://lore.kernel.org/r/20200430080625.26070-8-pali@kernel.org -Tested-by: Tomasz Maciej Nowak -Signed-off-by: Marek Behún -Signed-off-by: Lorenzo Pieralisi -Reviewed-by: Rob Herring -Acked-by: Thomas Petazzoni -Cc: Miquèl Raynal ---- - drivers/pci/controller/pci-aardvark.c | 69 +++++++++++++++++++++++++++ - 1 file changed, 69 insertions(+) - ---- a/drivers/pci/controller/pci-aardvark.c -+++ b/drivers/pci/controller/pci-aardvark.c -@@ -16,6 +16,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -103,6 +104,8 @@ - #define PCIE_CORE_CTRL2_STRICT_ORDER_ENABLE BIT(5) - #define PCIE_CORE_CTRL2_OB_WIN_ENABLE BIT(6) - #define PCIE_CORE_CTRL2_MSI_ENABLE BIT(10) -+#define PCIE_CORE_REF_CLK_REG (CONTROL_BASE_ADDR + 0x14) -+#define PCIE_CORE_REF_CLK_TX_ENABLE BIT(1) - #define PCIE_MSG_LOG_REG (CONTROL_BASE_ADDR + 0x30) - #define PCIE_ISR0_REG (CONTROL_BASE_ADDR + 0x40) - #define PCIE_MSG_PM_PME_MASK BIT(7) -@@ -207,6 +210,7 @@ struct advk_pcie { - int link_gen; - struct pci_bridge_emul bridge; - struct gpio_desc *reset_gpio; -+ struct phy *phy; - }; - - static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg) -@@ -358,6 +362,11 @@ static void advk_pcie_setup_hw(struct ad - - advk_pcie_issue_perst(pcie); - -+ /* Enable TX */ -+ reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG); -+ reg |= PCIE_CORE_REF_CLK_TX_ENABLE; -+ advk_writel(pcie, reg, PCIE_CORE_REF_CLK_REG); -+ - /* Set to Direct mode */ - reg = advk_readl(pcie, CTRL_CONFIG_REG); - reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT); -@@ -1083,6 +1092,62 @@ out_release_res: - return err; - } - -+static void __maybe_unused advk_pcie_disable_phy(struct advk_pcie *pcie) -+{ -+ phy_power_off(pcie->phy); -+ phy_exit(pcie->phy); -+} -+ -+static int advk_pcie_enable_phy(struct advk_pcie *pcie) -+{ -+ int ret; -+ -+ if (!pcie->phy) -+ return 0; -+ -+ ret = phy_init(pcie->phy); -+ if (ret) -+ return ret; -+ -+ ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE); -+ if (ret) { -+ phy_exit(pcie->phy); -+ return ret; -+ } -+ -+ ret = phy_power_on(pcie->phy); -+ if (ret) { -+ phy_exit(pcie->phy); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int advk_pcie_setup_phy(struct advk_pcie *pcie) -+{ -+ struct device *dev = &pcie->pdev->dev; -+ struct device_node *node = dev->of_node; -+ int ret = 0; -+ -+ pcie->phy = devm_of_phy_get(dev, node, NULL); -+ if (IS_ERR(pcie->phy) && (PTR_ERR(pcie->phy) == -EPROBE_DEFER)) -+ return PTR_ERR(pcie->phy); -+ -+ /* Old bindings miss the PHY handle */ -+ if (IS_ERR(pcie->phy)) { -+ dev_warn(dev, "PHY unavailable (%ld)\n", PTR_ERR(pcie->phy)); -+ pcie->phy = NULL; -+ return 0; -+ } -+ -+ ret = advk_pcie_enable_phy(pcie); -+ if (ret) -+ dev_err(dev, "Failed to initialize PHY (%d)\n", ret); -+ -+ return ret; -+} -+ - static int advk_pcie_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -@@ -1140,6 +1205,10 @@ static int advk_pcie_probe(struct platfo - else - pcie->link_gen = ret; - -+ ret = advk_pcie_setup_phy(pcie); -+ if (ret) -+ return ret; -+ - advk_pcie_setup_hw(pcie); - - ret = advk_sw_pci_bridge_init(pcie); diff --git a/target/linux/mvebu/patches-5.10/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch b/target/linux/mvebu/patches-5.10/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch deleted file mode 100644 index 87247b63ad..0000000000 --- a/target/linux/mvebu/patches-5.10/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch +++ /dev/null @@ -1,93 +0,0 @@ -From 715878016984b2617f6c1f177c50039e12e7bd5b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= -Date: Thu, 30 Apr 2020 10:06:23 +0200 -Subject: [PATCH] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio - function -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -We found out that we are unable to control the PERST# signal via the -default pin dedicated to be PERST# pin (GPIO2[3] pin) on A3700 SOC when -this pin is in EP_PCIE1_Resetn mode. There is a register in the PCIe -register space called PERSTN_GPIO_EN (D0088004[3]), but changing the -value of this register does not change the pin output when measuring -with voltmeter. - -We do not know if this is a bug in the SOC, or if it works only when -PCIe controller is in a certain state. - -Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready -before training link") says that when this pin changes pinctrl mode -from EP_PCIE1_Resetn to GPIO, the PERST# signal is asserted for a brief -moment. - -So currently the situation is that on A3700 boards the PERST# signal is -asserted in U-Boot (because the code in U-Boot issues reset via this pin -via GPIO mode), and then in Linux by the obscure and undocumented -mechanism described by the above mentioned commit. - -We want to issue PERST# signal in a known way, therefore this patch -changes the pcie_reset_pin function from "pcie" to "gpio" and adds the -reset-gpios property to the PCIe node in device tree files of -EspressoBin and Armada 3720 Dev Board (Turris Mox device tree already -has this property and uDPU does not have a PCIe port). - -Signed-off-by: Marek Behún -Cc: Remi Pommarel -Tested-by: Tomasz Maciej Nowak -Acked-by: Thomas Petazzoni -Signed-off-by: Gregory CLEMENT ---- - arch/arm64/boot/dts/marvell/armada-3720-db.dts | 3 +++ - arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 + - arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 4 ---- - arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +- - 4 files changed, 5 insertions(+), 5 deletions(-) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts -@@ -128,6 +128,9 @@ - - /* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */ - &pcie0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; -+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; - status = "okay"; - }; - ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -59,6 +59,7 @@ - phys = <&comphy1 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; -+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; - }; - - /* J6 */ ---- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts -@@ -120,10 +120,6 @@ - }; - }; - --&pcie_reset_pins { -- function = "gpio"; --}; -- - &pcie0 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; ---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -@@ -317,7 +317,7 @@ - - pcie_reset_pins: pcie-reset-pins { - groups = "pcie1"; -- function = "pcie"; -+ function = "gpio"; - }; - - pcie_clkreq_pins: pcie-clkreq-pins { diff --git a/target/linux/mvebu/patches-5.10/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch b/target/linux/mvebu/patches-5.10/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch deleted file mode 100644 index e92393ff6f..0000000000 --- a/target/linux/mvebu/patches-5.10/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch +++ /dev/null @@ -1,57 +0,0 @@ -From df749cdb015011e9ed8b60ebb84b4e76a9f35735 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= -Date: Thu, 30 Apr 2020 10:06:24 +0200 -Subject: [PATCH] arm64: dts: marvell: armada-37xx: Move PCIe comphy handle - property -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Move the comphy handle property of the PCIe node from board specific -device tree files (EspressoBin and Turris Mox) to the generic -armada-37xx.dtsi. - -This is correct since this is the only possible PCIe PHY configuration -on Armada 37xx, so when PCIe is enabled on any board, this handle is -correct. - -Signed-off-by: Marek Behún -Tested-by: Tomasz Maciej Nowak -Acked-by: Thomas Petazzoni -Signed-off-by: Gregory CLEMENT ---- - arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 - - arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 - - arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 + - 3 files changed, 1 insertion(+), 2 deletions(-) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -56,7 +56,6 @@ - /* J9 */ - &pcie0 { - status = "okay"; -- phys = <&comphy1 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; - reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; ---- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts -@@ -126,7 +126,6 @@ - status = "okay"; - max-link-speed = <2>; - reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; -- phys = <&comphy1 0>; - - /* enabled by U-Boot if PCIe module is present */ - status = "disabled"; ---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -@@ -493,6 +493,7 @@ - <0 0 0 2 &pcie_intc 1>, - <0 0 0 3 &pcie_intc 2>, - <0 0 0 4 &pcie_intc 3>; -+ phys = <&comphy1 0>; - pcie_intc: interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; diff --git a/target/linux/mvebu/patches-5.10/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch b/target/linux/mvebu/patches-5.10/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch deleted file mode 100644 index ad918bef88..0000000000 --- a/target/linux/mvebu/patches-5.10/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 1b5a2dd9e266d78d5fddd7e6b116e47ba9577b5e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Thu, 30 Apr 2020 10:06:25 +0200 -Subject: [PATCH] arm64: dts: marvell: armada-37xx: Move PCIe max-link-speed - property -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Move the max-link-speed property of the PCIe node from board specific -device tree files to the generic armada-37xx.dtsi. - -Armada 37xx supports only PCIe gen2 speed so max-link-speed property -should be in the generic armada-37xx.dtsi file. - -Signed-off-by: Pali Rohár -Tested-by: Tomasz Maciej Nowak -Acked-by: Thomas Petazzoni -Signed-off-by: Gregory CLEMENT ---- - arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 - - arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 + - 2 files changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts -@@ -124,7 +124,6 @@ - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; - status = "okay"; -- max-link-speed = <2>; - reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; - - /* enabled by U-Boot if PCIe module is present */ ---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi -@@ -493,6 +493,7 @@ - <0 0 0 2 &pcie_intc 1>, - <0 0 0 3 &pcie_intc 2>, - <0 0 0 4 &pcie_intc 3>; -+ max-link-speed = <2>; - phys = <&comphy1 0>; - pcie_intc: interrupt-controller { - interrupt-controller; diff --git a/target/linux/mvebu/patches-5.10/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch b/target/linux/mvebu/patches-5.10/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch deleted file mode 100644 index 818fce85a8..0000000000 --- a/target/linux/mvebu/patches-5.10/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 11b2af36cc874027ce701c5784cb957c99c7de3d Mon Sep 17 00:00:00 2001 -From: Russell King -Date: Wed, 6 May 2020 10:40:37 +0100 -Subject: [PATCH] arm64: dts: add uDPU i2c bus recovery - -Signed-off-by: Russell King -Reviewed-by: Andrew Lunn -Signed-off-by: Gregory CLEMENT ---- - .../boot/dts/marvell/armada-3720-uDPU.dts | 22 +++++++++++++++++-- - 1 file changed, 20 insertions(+), 2 deletions(-) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts -@@ -117,18 +117,36 @@ - }; - }; - -+&pinctrl_nb { -+ i2c1_recovery_pins: i2c1-recovery-pins { -+ groups = "i2c1"; -+ function = "gpio"; -+ }; -+ -+ i2c2_recovery_pins: i2c2-recovery-pins { -+ groups = "i2c2"; -+ function = "gpio"; -+ }; -+}; -+ - &i2c0 { - status = "okay"; -- pinctrl-names = "default"; -+ pinctrl-names = "default", "recovery"; - pinctrl-0 = <&i2c1_pins>; -+ pinctrl-1 = <&i2c1_recovery_pins>; - /delete-property/mrvl,i2c-fast-mode; -+ scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -+ sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - }; - - &i2c1 { - status = "okay"; -- pinctrl-names = "default"; -+ pinctrl-names = "default", "recovery"; - pinctrl-0 = <&i2c2_pins>; -+ pinctrl-1 = <&i2c2_recovery_pins>; - /delete-property/mrvl,i2c-fast-mode; -+ scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -+ sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - lm75@48 { - status = "okay"; diff --git a/target/linux/mvebu/patches-5.10/024-PCI-aardvark-Don-t-touch-PCIe-registers-if-no-card-c.patch b/target/linux/mvebu/patches-5.10/024-PCI-aardvark-Don-t-touch-PCIe-registers-if-no-card-c.patch deleted file mode 100644 index dfc068c8cb..0000000000 --- a/target/linux/mvebu/patches-5.10/024-PCI-aardvark-Don-t-touch-PCIe-registers-if-no-card-c.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 70e380250c3621c55ff218cbaf2272830d9dbb1d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Thu, 2 Jul 2020 10:30:36 +0200 -Subject: [PATCH] PCI: aardvark: Don't touch PCIe registers if no card - connected -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -When there is no PCIe card connected and advk_pcie_rd_conf() or -advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated -root bridge, the aardvark driver throws the following error message: - - advk-pcie d0070000.pcie: config read/write timed out - -Obviously accessing PCIe registers of disconnected card is not possible. - -Extend check in advk_pcie_valid_device() function for validating -availability of PCIe bus. If PCIe link is down, then the device is marked -as Not Found and the driver does not try to access these registers. - -This is just an optimization to prevent accessing PCIe registers when card -is disconnected. Trying to access PCIe registers of disconnected card does -not cause any crash, kernel just needs to wait for a timeout. So if card -disappear immediately after checking for PCIe link (before accessing PCIe -registers), it does not cause any problems. - -Link: https://lore.kernel.org/r/20200702083036.12230-1-pali@kernel.org -Signed-off-by: Pali Rohár -Signed-off-by: Lorenzo Pieralisi ---- - drivers/pci/controller/pci-aardvark.c | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/drivers/pci/controller/pci-aardvark.c -+++ b/drivers/pci/controller/pci-aardvark.c -@@ -639,6 +639,13 @@ static bool advk_pcie_valid_device(struc - if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0) - return false; - -+ /* -+ * If the link goes down after we check for link-up, nothing bad -+ * happens but the config access times out. -+ */ -+ if (bus->number != pcie->root_bus_nr && !advk_pcie_link_up(pcie)) -+ return false; -+ - return true; - } - diff --git a/target/linux/mvebu/patches-5.10/025-power-reset-add-driver-for-LinkStation-power-off.patch b/target/linux/mvebu/patches-5.10/025-power-reset-add-driver-for-LinkStation-power-off.patch deleted file mode 100644 index 64ea26559e..0000000000 --- a/target/linux/mvebu/patches-5.10/025-power-reset-add-driver-for-LinkStation-power-off.patch +++ /dev/null @@ -1,207 +0,0 @@ -From a7f79f99541eff4e6bcae0014eb08d3019337565 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?= -Date: Wed, 15 Jul 2020 15:35:14 +0200 -Subject: [PATCH] power: reset: add driver for LinkStation power off -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Some Buffalo LinkStations perform the power off operation, at restart -time, depending on the state of an output pin (LED2/INTn) at the ethernet -PHY. This pin is also used to wake the machine when a WoL packet is -received by the PHY. - -The driver is required by the Buffalo LinkStation LS421DE (ARM MVEBU), -and other models. Without it, the board remains forever halted if a -power off command is executed, unless the PSU is disconnected and -connected again. - -Add the driver to provide the power off function and also make the WoL -feature to be available. - -Signed-off-by: Daniel González Cabanelas -Signed-off-by: Sebastian Reichel ---- - drivers/power/reset/Kconfig | 11 ++ - drivers/power/reset/Makefile | 1 + - drivers/power/reset/linkstation-poweroff.c | 136 +++++++++++++++++++++ - 3 files changed, 148 insertions(+) - create mode 100644 drivers/power/reset/linkstation-poweroff.c - ---- a/drivers/power/reset/Kconfig -+++ b/drivers/power/reset/Kconfig -@@ -99,6 +99,17 @@ config POWER_RESET_HISI - help - Reboot support for Hisilicon boards. - -+config POWER_RESET_LINKSTATION -+ tristate "Buffalo LinkStation power-off driver" -+ depends on ARCH_MVEBU || COMPILE_TEST -+ depends on OF_MDIO && PHYLIB -+ help -+ This driver supports turning off some Buffalo LinkStations by -+ setting an output pin at the ethernet PHY to the correct state. -+ It also makes the device compatible with the WoL function. -+ -+ Say Y here if you have a Buffalo LinkStation LS421D/E. -+ - config POWER_RESET_MSM - bool "Qualcomm MSM power-off driver" - depends on ARCH_QCOM ---- a/drivers/power/reset/Makefile -+++ b/drivers/power/reset/Makefile -@@ -10,6 +10,7 @@ obj-$(CONFIG_POWER_RESET_GEMINI_POWEROFF - obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o - obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o - obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o -+obj-${CONFIG_POWER_RESET_LINKSTATION} += linkstation-poweroff.o - obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o - obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o - obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o ---- /dev/null -+++ b/drivers/power/reset/linkstation-poweroff.c -@@ -0,0 +1,144 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * LinkStation power off restart driver -+ * Copyright (C) 2020 Daniel González Cabanelas -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* Defines from the eth phy Marvell driver */ -+#define MII_MARVELL_COPPER_PAGE 0 -+#define MII_MARVELL_LED_PAGE 3 -+#define MII_MARVELL_WOL_PAGE 17 -+#define MII_MARVELL_PHY_PAGE 22 -+ -+#define MII_PHY_LED_CTRL 16 -+#define MII_88E1318S_PHY_LED_TCR 18 -+#define MII_88E1318S_PHY_WOL_CTRL 16 -+#define MII_M1011_IEVENT 19 -+ -+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) -+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) -+#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12) -+#define LED2_FORCE_ON (0x8 << 8) -+#define LEDMASK GENMASK(11,8) -+ -+static struct phy_device *phydev; -+ -+static void mvphy_reg_intn(u16 data) -+{ -+ int rc = 0, saved_page; -+ -+ saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE); -+ if (saved_page < 0) -+ goto err; -+ -+ /* Force manual LED2 control to let INTn work */ -+ __phy_modify(phydev, MII_PHY_LED_CTRL, LEDMASK, LED2_FORCE_ON); -+ -+ /* Set the LED[2]/INTn pin to the required state */ -+ __phy_modify(phydev, MII_88E1318S_PHY_LED_TCR, -+ MII_88E1318S_PHY_LED_TCR_FORCE_INT, -+ MII_88E1318S_PHY_LED_TCR_INTn_ENABLE | data); -+ -+ if (!data) { -+ /* Clear interrupts to ensure INTn won't be holded in high state */ -+ __phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_COPPER_PAGE); -+ __phy_read(phydev, MII_M1011_IEVENT); -+ -+ /* If WOL was enabled and a magic packet was received before powering -+ * off, we won't be able to wake up by sending another magic packet. -+ * Clear WOL status. -+ */ -+ __phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE); -+ __phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL, -+ MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS); -+ } -+err: -+ rc = phy_restore_page(phydev, saved_page, rc); -+ if (rc < 0) -+ dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc); -+ -+ if (!data) { -+ /* Slow down the PHY to save energy */ -+ rc= phy_speed_down(phydev, false); -+ if (rc < 0) -+ dev_err(&phydev->mdio.dev, "PHY speed down failed, %d\n", rc); -+ } -+} -+ -+static int linkstation_reboot_notifier(struct notifier_block *nb, -+ unsigned long action, void *unused) -+{ -+ if (action == SYS_RESTART) -+ mvphy_reg_intn(MII_88E1318S_PHY_LED_TCR_FORCE_INT); -+ -+ return NOTIFY_DONE; -+} -+ -+static struct notifier_block linkstation_reboot_nb = { -+ .notifier_call = linkstation_reboot_notifier, -+}; -+ -+static void linkstation_poweroff(void) -+{ -+ unregister_reboot_notifier(&linkstation_reboot_nb); -+ mvphy_reg_intn(0); -+ -+ kernel_restart("Power off"); -+} -+ -+static const struct of_device_id ls_poweroff_of_match[] = { -+ { .compatible = "buffalo,ls421d" }, -+ { .compatible = "buffalo,ls421de" }, -+ { }, -+}; -+ -+static int __init linkstation_poweroff_init(void) -+{ -+ struct mii_bus *bus; -+ struct device_node *dn; -+ -+ dn = of_find_matching_node(NULL, ls_poweroff_of_match); -+ if (!dn) -+ return -ENODEV; -+ of_node_put(dn); -+ -+ dn = of_find_node_by_name(NULL, "mdio"); -+ if (!dn) -+ return -ENODEV; -+ -+ bus = of_mdio_find_bus(dn); -+ of_node_put(dn); -+ if (!bus) -+ return -EPROBE_DEFER; -+ -+ phydev = phy_find_first(bus); -+ if (!phydev) -+ return -EPROBE_DEFER; -+ -+ register_reboot_notifier(&linkstation_reboot_nb); -+ pm_power_off = linkstation_poweroff; -+ -+ pr_info("LinkStation power off driver registered\n"); -+ return 0; -+} -+ -+static void __exit linkstation_poweroff_exit(void) -+{ -+ pm_power_off = NULL; -+ unregister_reboot_notifier(&linkstation_reboot_nb); -+} -+ -+module_init(linkstation_poweroff_init); -+module_exit(linkstation_poweroff_exit); -+ -+MODULE_AUTHOR("Daniel González Cabanelas "); -+MODULE_DESCRIPTION("LinkStation power off driver"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/mvebu/patches-5.10/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch b/target/linux/mvebu/patches-5.10/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch deleted file mode 100644 index bb9d7b7849..0000000000 --- a/target/linux/mvebu/patches-5.10/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch +++ /dev/null @@ -1,44 +0,0 @@ -From b0c6ae0f8948a2be6bf4e8b4bbab9ca1343289b6 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Wed, 2 Sep 2020 16:43:44 +0200 -Subject: [PATCH] PCI: aardvark: Fix initialization with old Marvell's Arm - Trusted Firmware -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Old ATF automatically power on pcie phy and does not provide SMC call for -phy power on functionality which leads to aardvark initialization failure: - -[ 0.330134] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware -[ 0.338846] phy phy-d0018300.phy.1: phy poweron failed --> -95 -[ 0.344753] advk-pcie d0070000.pcie: Failed to initialize PHY (-95) -[ 0.351160] advk-pcie: probe of d0070000.pcie failed with error -95 - -This patch fixes above failure by ignoring 'not supported' error in -aardvark driver. In this case it is expected that phy is already power on. - -Tested-by: Tomasz Maciej Nowak -Link: https://lore.kernel.org/r/20200902144344.16684-3-pali@kernel.org -Fixes: 366697018c9a ("PCI: aardvark: Add PHY support") -Signed-off-by: Pali Rohár -Signed-off-by: Lorenzo Pieralisi -Reviewed-by: Rob Herring -Cc: # 5.8+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno ---- - drivers/pci/controller/pci-aardvark.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - ---- a/drivers/pci/controller/pci-aardvark.c -+++ b/drivers/pci/controller/pci-aardvark.c -@@ -1123,7 +1123,9 @@ static int advk_pcie_enable_phy(struct a - } - - ret = phy_power_on(pcie->phy); -- if (ret) { -+ if (ret == -EOPNOTSUPP) { -+ dev_warn(&pcie->pdev->dev, "PHY unsupported by firmware\n"); -+ } else if (ret) { - phy_exit(pcie->phy); - return ret; - } diff --git a/target/linux/mvebu/patches-5.10/027-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch b/target/linux/mvebu/patches-5.10/027-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch deleted file mode 100644 index 927670d8b3..0000000000 --- a/target/linux/mvebu/patches-5.10/027-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch +++ /dev/null @@ -1,88 +0,0 @@ -From b64d814257b027e29a474bcd660f6372490138c7 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Mon, 7 Sep 2020 13:27:17 +0200 -Subject: [PATCH] arm64: dts: marvell: espressobin: Add ethernet switch aliases -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Espressobin boards have 3 ethernet ports and some of them got assigned more -then one MAC address. MAC addresses are stored in U-Boot environment. - -Since commit a2c7023f7075c ("net: dsa: read mac address from DT for slave -device") kernel can use MAC addresses from DT for particular DSA port. - -Currently Espressobin DTS file contains alias just for ethernet0. - -This patch defines additional ethernet aliases in Espressobin DTS files, so -bootloader can fill correct MAC address for DSA switch ports if more MAC -addresses were specified. - -DT alias ethernet1 is used for wan port, DT aliases ethernet2 and ethernet3 -are used for lan ports for both Espressobin revisions (V5 and V7). - -Fixes: 5253cb8c00a6f ("arm64: dts: marvell: espressobin: add ethernet alias") -Cc: # a2c7023f7075c: dsa: read mac address -Signed-off-by: Pali Rohár -Reviewed-by: Andrew Lunn -Reviewed-by: Andre Heider -Signed-off-by: Gregory CLEMENT ---- - .../dts/marvell/armada-3720-espressobin-v7-emmc.dts | 10 ++++++++-- - .../boot/dts/marvell/armada-3720-espressobin-v7.dts | 10 ++++++++-- - 3 files changed, 24 insertions(+), 8 deletions(-) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts -@@ -15,16 +15,22 @@ - compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", - "globalscale,espressobin", "marvell,armada3720", - "marvell,armada3710"; -+ -+ aliases { -+ /* ethernet1 is wan port */ -+ ethernet1 = &switch0port3; -+ ethernet3 = &switch0port1; -+ }; - }; - - &ports { -- port@1 { -+ switch0port1: port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&switch0phy0>; - }; - -- port@3 { -+ switch0port3: port@3 { - reg = <3>; - label = "wan"; - phy-handle = <&switch0phy2>; ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts -@@ -14,16 +14,22 @@ - model = "Globalscale Marvell ESPRESSOBin Board V7"; - compatible = "globalscale,espressobin-v7", "globalscale,espressobin", - "marvell,armada3720", "marvell,armada3710"; -+ -+ aliases { -+ /* ethernet1 is wan port */ -+ ethernet1 = &switch0port3; -+ ethernet3 = &switch0port1; -+ }; - }; - - &ports { -- port@1 { -+ switch0port1: port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&switch0phy0>; - }; - -- port@3 { -+ switch0port3: port@3 { - reg = <3>; - label = "wan"; - phy-handle = <&switch0phy2>; diff --git a/target/linux/mvebu/patches-5.10/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/mvebu/patches-5.10/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch index fd60cdb322..f2a0478693 100644 --- a/target/linux/mvebu/patches-5.10/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch +++ b/target/linux/mvebu/patches-5.10/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch @@ -28,7 +28,7 @@ Signed-off-by: Michael Gray --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -1827,6 +1827,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN +@@ -1780,6 +1780,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN The command-line arguments provided by the boot loader will be appended to the the device tree bootargs property. @@ -48,7 +48,7 @@ Signed-off-by: Michael Gray config CMDLINE --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c -@@ -4,6 +4,8 @@ +@@ -5,6 +5,8 @@ #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) #define do_extend_cmdline 1 @@ -57,7 +57,7 @@ Signed-off-by: Michael Gray #else #define do_extend_cmdline 0 #endif -@@ -67,6 +69,72 @@ static uint32_t get_cell_size(const void +@@ -69,6 +71,72 @@ static uint32_t get_cell_size(const void return cell_size; } @@ -130,7 +130,7 @@ Signed-off-by: Michael Gray static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) { char cmdline[COMMAND_LINE_SIZE]; -@@ -86,12 +154,21 @@ static void merge_fdt_bootargs(void *fdt +@@ -88,12 +156,21 @@ static void merge_fdt_bootargs(void *fdt /* and append the ATAG_CMDLINE */ if (fdt_cmdline) { @@ -152,7 +152,7 @@ Signed-off-by: Michael Gray } *ptr = '\0'; -@@ -166,7 +243,9 @@ int atags_to_fdt(void *atag_list, void * +@@ -168,7 +245,9 @@ int atags_to_fdt(void *atag_list, void * else setprop_string(fdt, "/chosen", "bootargs", atag->u.cmdline.cmdline); @@ -163,7 +163,7 @@ Signed-off-by: Michael Gray if (memcount >= sizeof(mem_reg_property)/4) continue; if (!atag->u.mem.size) -@@ -210,6 +289,10 @@ int atags_to_fdt(void *atag_list, void * +@@ -212,6 +291,10 @@ int atags_to_fdt(void *atag_list, void * setprop(fdt, "/memory", "reg", mem_reg_property, 4 * memcount * memsize); } @@ -176,9 +176,9 @@ Signed-off-by: Michael Gray } --- a/init/main.c +++ b/init/main.c -@@ -104,6 +104,10 @@ - #define CREATE_TRACE_POINTS - #include +@@ -110,6 +110,10 @@ + + #include +#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) +#include @@ -187,10 +187,10 @@ Signed-off-by: Michael Gray static int kernel_init(void *); extern void init_IRQ(void); -@@ -631,6 +635,18 @@ asmlinkage __visible void __init start_k +@@ -903,6 +907,18 @@ asmlinkage __visible void __init __no_sa page_alloc_init(); - pr_notice("Kernel command line: %s\n", boot_command_line); + pr_notice("Kernel command line: %s\n", saved_command_line); + +#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) + //Show bootloader's original command line for reference diff --git a/target/linux/mvebu/patches-5.10/301-mvebu-armada-38x-enable-libata-leds.patch b/target/linux/mvebu/patches-5.10/301-mvebu-armada-38x-enable-libata-leds.patch index b8ab700c97..615caac24f 100644 --- a/target/linux/mvebu/patches-5.10/301-mvebu-armada-38x-enable-libata-leds.patch +++ b/target/linux/mvebu/patches-5.10/301-mvebu-armada-38x-enable-libata-leds.patch @@ -1,7 +1,7 @@ --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig -@@ -69,6 +69,7 @@ config MACH_ARMADA_38X - select HAVE_SMP +@@ -67,6 +67,7 @@ config MACH_ARMADA_38X + select HAVE_ARM_TWD if SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_38X + select ARCH_WANT_LIBATA_LEDS diff --git a/target/linux/mvebu/patches-5.10/315-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch b/target/linux/mvebu/patches-5.10/315-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch deleted file mode 100644 index a741e378d9..0000000000 --- a/target/linux/mvebu/patches-5.10/315-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 6ea9a1ee9367fb35acff1c08a0dc4213ff4687a0 Mon Sep 17 00:00:00 2001 -From: Tomasz Maciej Nowak -Date: Tue, 9 Apr 2019 15:53:42 +0200 -Subject: [PATCH] arm64: dts: marvell: armada-3720-espressobin: add ports - phandle - -Instead of referencing the whole mdio node, add ports phandle to adjust -port labels in dts for different hardware iterations of ESPRESSObin -boards. - -Signed-off-by: Tomasz Maciej Nowak ---- - arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -147,7 +147,7 @@ - - dsa,member = <0 0>; - -- ports { -+ ports: ports { - #address-cells = <1>; - #size-cells = <0>; - diff --git a/target/linux/mvebu/patches-5.10/400-find_active_root.patch b/target/linux/mvebu/patches-5.10/400-find_active_root.patch index 854031b0d5..f61d85bc05 100644 --- a/target/linux/mvebu/patches-5.10/400-find_active_root.patch +++ b/target/linux/mvebu/patches-5.10/400-find_active_root.patch @@ -39,7 +39,7 @@ Signed-off-by: Imre Kaloz parts[i].name = partname; if (of_get_property(pp, "read-only", &len)) -@@ -215,6 +222,18 @@ static int __init ofpart_parser_init(voi +@@ -218,6 +225,18 @@ static int __init ofpart_parser_init(voi return 0; } diff --git a/target/linux/mvebu/patches-5.10/700-mvneta-tx-queue-workaround.patch b/target/linux/mvebu/patches-5.10/700-mvneta-tx-queue-workaround.patch index a82a4c0d62..2e840fd787 100644 --- a/target/linux/mvebu/patches-5.10/700-mvneta-tx-queue-workaround.patch +++ b/target/linux/mvebu/patches-5.10/700-mvneta-tx-queue-workaround.patch @@ -9,7 +9,7 @@ Signed-off-by: Felix Fietkau --- --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -4684,6 +4684,14 @@ static int mvneta_ethtool_set_eee(struct +@@ -4896,6 +4896,14 @@ static int mvneta_ethtool_set_eee(struct return phylink_ethtool_set_eee(pp->phylink, eee); } @@ -24,11 +24,11 @@ Signed-off-by: Felix Fietkau static const struct net_device_ops mvneta_netdev_ops = { .ndo_open = mvneta_open, .ndo_stop = mvneta_stop, -@@ -4694,6 +4702,7 @@ static const struct net_device_ops mvnet +@@ -4906,6 +4914,7 @@ static const struct net_device_ops mvnet .ndo_fix_features = mvneta_fix_features, .ndo_get_stats64 = mvneta_get_stats64, .ndo_do_ioctl = mvneta_ioctl, + .ndo_select_queue = mvneta_select_queue, - .ndo_bpf = mvneta_xdp, + .ndo_bpf = mvneta_xdp, .ndo_xdp_xmit = mvneta_xdp_xmit, }; diff --git a/target/linux/mvebu/patches-5.10/801-pci-mvebu-time-out-reset-on-link-up.patch b/target/linux/mvebu/patches-5.10/801-pci-mvebu-time-out-reset-on-link-up.patch index 4058dc8ed5..42f890e48c 100644 --- a/target/linux/mvebu/patches-5.10/801-pci-mvebu-time-out-reset-on-link-up.patch +++ b/target/linux/mvebu/patches-5.10/801-pci-mvebu-time-out-reset-on-link-up.patch @@ -13,7 +13,7 @@ Signed-off-by: Russell King --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c -@@ -928,6 +928,7 @@ static int mvebu_pcie_powerup(struct mve +@@ -933,6 +933,7 @@ static int mvebu_pcie_powerup(struct mve if (port->reset_gpio) { u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000; @@ -21,7 +21,7 @@ Signed-off-by: Russell King of_property_read_u32(port->dn, "reset-delay-us", &reset_udelay); -@@ -935,7 +936,13 @@ static int mvebu_pcie_powerup(struct mve +@@ -940,7 +941,13 @@ static int mvebu_pcie_powerup(struct mve udelay(100); gpiod_set_value_cansleep(port->reset_gpio, 0); @@ -36,7 +36,7 @@ Signed-off-by: Russell King } return 0; -@@ -1099,15 +1106,16 @@ static int mvebu_pcie_probe(struct platf +@@ -1100,15 +1107,16 @@ static int mvebu_pcie_probe(struct platf if (!child) continue;