From: John Crispin <john@openwrt.org>
Date: Thu, 25 Apr 2013 19:03:41 +0000 (+0000)
Subject: lantiq: make leds and network work on VG3503J
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b42a17366485e434bbd0182ed2054951b17edd98;p=openwrt%2Fstaging%2Fneocturne.git

lantiq: make leds and network work on VG3503J

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36445
---

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
index 3f87fe0758..bdf1311705 100755
--- a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
@@ -19,6 +19,13 @@ done
 board=$(lantiq_board_id)
 
 case "$board" in
+VG3503J)
+	ucidef_set_led_netdev "lan1" "lan1" "bt:green:lan1" "eth0"
+	ucidef_set_led_netdev "lan2" "lan2" "bt:green:lan2" "eth1"
+	ucidef_set_led_netdev "port1" "port1" "bt:green:port1" "eth0"
+	ucidef_set_led_netdev "port2" "port2" "bt:green:port2" "eth1"
+	ucidef_set_led_netdev "vdsl" "vdsl" "bt:green:dsl" "ptm0"
+	;;
 *)
 	;;
 esac
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index 006f1bcc45..06390a73d9 100755
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -69,6 +69,9 @@ WBMR)
 	ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5"
 	;;
 
+VG3503J)
+	ucidef_set_interface_lan 'eth0 eth1'
+	;;
 esac
 
 [ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
diff --git a/target/linux/lantiq/dts/VG3503J.dts b/target/linux/lantiq/dts/VG3503J.dts
index 0aea8d80c7..340bfaae45 100644
--- a/target/linux/lantiq/dts/VG3503J.dts
+++ b/target/linux/lantiq/dts/VG3503J.dts
@@ -89,12 +89,27 @@
 			interrupt-parent = <&icu0>;
 			interrupts = <73 72>;
 
-			lan: interface@0 {
+			lan1: interface@0 {
 				compatible = "lantiq,xrx200-pdi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0>;
 				mac-address = [ 00 11 22 33 44 55 ];
+				lantiq,wan;
+				ethernet@4 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <4>;
+					phy-mode = "mii";
+					phy-handle = <&phy13>;
+				};
+			};
+
+			lan2: interface@1 {
+				compatible = "lantiq,xrx200-pdi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+				mac-address = [ 00 11 22 33 44 56 ];
 
 				ethernet@2 {
 					compatible = "lantiq,xrx200-pdi-port";
@@ -102,12 +117,6 @@
 					phy-mode = "mii";
 					phy-handle = <&phy11>;
 				};
-				ethernet@4 {
-					compatible = "lantiq,xrx200-pdi-port";
-					reg = <4>;
-					phy-mode = "mii";
-					phy-handle = <&phy13>;
-				};
 			};
 
 			mdio@0 {
@@ -149,16 +158,16 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		port2green {
-			label = "bt:green:port2";
+		port2orange {
+			label = "bt:orange:port2";
 			gpios = <&gpio 2 0>;
 		};
 		lan2 {
 			label = "bt:green:lan2";
 			gpios = <&gpio 5 0>;
 		};
-		port2orange {
-			label = "bt:orange:port2";
+		port2green {
+			label = "bt:green:port2";
 			gpios = <&gpio 7 0>;
 		};
 		power2 {
@@ -166,7 +175,7 @@
 			gpios = <&gpio 14 1>;
 		};
 		dsl {
-			label = "dsl";
+			label = "bt:green:dsl";
 			gpios = <&gpio 19 1>;
 		};
 		power {