From: Matthew Hagan Date: Sat, 16 Oct 2021 19:54:25 +0000 (+0100) Subject: kernel: 5.10: qca8k: backport qca8k_setup tidy-up X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b428f187f0db70a0a7166895ac9d159104ae5708;p=openwrt%2Fstaging%2Fjow.git kernel: 5.10: qca8k: backport qca8k_setup tidy-up Tidy qca8k_setup for loops relating to port handling. No functional changes. Signed-off-by: Ansuel Smith Signed-off-by: Matthew Hagan --- diff --git a/target/linux/generic/backport-5.10/799-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch b/target/linux/generic/backport-5.10/799-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch new file mode 100644 index 0000000000..71fa3022d5 --- /dev/null +++ b/target/linux/generic/backport-5.10/799-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch @@ -0,0 +1,151 @@ +From 040e926f5813a5f4cc18dbff7c942d1e52f368f2 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Tue, 19 Oct 2021 02:08:50 +0200 +Subject: net: dsa: qca8k: tidy for loop in setup and add cpu port check + +Tidy and organize qca8k setup function from multiple for loop. +Change for loop in bridge leave/join to scan all port and skip cpu port. +No functional change intended. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 74 +++++++++++++++++++++++++++++-------------------- + 1 file changed, 44 insertions(+), 30 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1122,28 +1122,34 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + dev_warn(priv->dev, "mib init failed"); + +- /* Enable QCA header mode on the cpu port */ +- ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(cpu_port), +- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | +- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); +- if (ret) { +- dev_err(priv->dev, "failed enabling QCA header mode"); +- return ret; +- } +- +- /* Disable forwarding by default on all ports */ ++ /* Initial setup of all ports */ + for (i = 0; i < QCA8K_NUM_PORTS; i++) { ++ /* Disable forwarding by default on all ports */ + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_MEMBER, 0); + if (ret) + return ret; +- } + +- /* Disable MAC by default on all ports */ +- for (i = 1; i < QCA8K_NUM_PORTS; i++) +- qca8k_port_set_status(priv, i, 0); ++ /* Enable QCA header mode on all cpu ports */ ++ if (dsa_is_cpu_port(ds, i)) { ++ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i), ++ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | ++ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); ++ if (ret) { ++ dev_err(priv->dev, "failed enabling QCA header mode"); ++ return ret; ++ } ++ } ++ ++ /* Disable MAC by default on all user ports */ ++ if (dsa_is_user_port(ds, i)) ++ qca8k_port_set_status(priv, i, 0); ++ } + +- /* Forward all unknown frames to CPU port for Linux processing */ ++ /* Forward all unknown frames to CPU port for Linux processing ++ * Notice that in multi-cpu config only one port should be set ++ * for igmp, unknown, multicast and broadcast packet ++ */ + ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, + BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S | + BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S | +@@ -1152,11 +1158,13 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + +- /* Setup connection between CPU port & user ports */ ++ /* Setup connection between CPU port & user ports ++ * Configure specific switch configuration for ports ++ */ + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + /* CPU port gets connected to all user ports of the switch */ + if (dsa_is_cpu_port(ds, i)) { +- ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port), ++ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); + if (ret) + return ret; +@@ -1193,16 +1201,14 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + } +- } + +- /* The port 5 of the qca8337 have some problem in flood condition. The +- * original legacy driver had some specific buffer and priority settings +- * for the different port suggested by the QCA switch team. Add this +- * missing settings to improve switch stability under load condition. +- * This problem is limited to qca8337 and other qca8k switch are not affected. +- */ +- if (priv->switch_id == QCA8K_ID_QCA8337) { +- for (i = 0; i < QCA8K_NUM_PORTS; i++) { ++ /* The port 5 of the qca8337 have some problem in flood condition. The ++ * original legacy driver had some specific buffer and priority settings ++ * for the different port suggested by the QCA switch team. Add this ++ * missing settings to improve switch stability under load condition. ++ * This problem is limited to qca8337 and other qca8k switch are not affected. ++ */ ++ if (priv->switch_id == QCA8K_ID_QCA8337) { + switch (i) { + /* The 2 CPU port and port 5 requires some different + * priority than any other ports. +@@ -1238,6 +1244,12 @@ qca8k_setup(struct dsa_switch *ds) + QCA8K_PORT_HOL_CTRL1_WRED_EN, + mask); + } ++ ++ /* Set initial MTU for every port. ++ * We have only have a general MTU setting. So track ++ * every port and set the max across all port. ++ */ ++ priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN; + } + + /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */ +@@ -1251,8 +1263,6 @@ qca8k_setup(struct dsa_switch *ds) + } + + /* Setup our port MTUs to match power on defaults */ +- for (i = 0; i < QCA8K_NUM_PORTS; i++) +- priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN; + ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN); + if (ret) + dev_warn(priv->dev, "failed setting MTU settings"); +@@ -1728,7 +1738,9 @@ qca8k_port_bridge_join(struct dsa_switch + cpu_port = dsa_to_port(ds, port)->cpu_dp->index; + port_mask = BIT(cpu_port); + +- for (i = 1; i < QCA8K_NUM_PORTS; i++) { ++ for (i = 0; i < QCA8K_NUM_PORTS; i++) { ++ if (dsa_is_cpu_port(ds, i)) ++ continue; + if (dsa_to_port(ds, i)->bridge_dev != br) + continue; + /* Add this port to the portvlan mask of the other ports +@@ -1758,7 +1770,9 @@ qca8k_port_bridge_leave(struct dsa_switc + + cpu_port = dsa_to_port(ds, port)->cpu_dp->index; + +- for (i = 1; i < QCA8K_NUM_PORTS; i++) { ++ for (i = 0; i < QCA8K_NUM_PORTS; i++) { ++ if (dsa_is_cpu_port(ds, i)) ++ continue; + if (dsa_to_port(ds, i)->bridge_dev != br) + continue; + /* Remove this port to the portvlan mask of the other ports