From: David Bauer <mail@david-bauer.net>
Date: Sat, 14 Sep 2024 17:10:10 +0000 (+0200)
Subject: ipq40xx: add PoE passthrough GPIO
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b40cc46cc882ff97f2752e7837173ffc9f884eb9;p=openwrt%2Fstaging%2Fthess.git

ipq40xx: add PoE passthrough GPIO

Add the GPIO pin of the PoE passthrough switch on the Aruba AP-303H.
Power is activated when the pin is low. It enables a PSE chip, so power
is only supplied to downstream devices when they are 802.3af/at
compliant devices.

Ensure you use a sufficient power supply when chaining a consuming
device after the AP.

Signed-off-by: David Bauer <mail@david-bauer.net>
---

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches b/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
index 226785d46c..43ed32fc2b 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
@@ -6,6 +6,9 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+aruba,ap-303h)
+	ucidef_add_gpio_switch "poe_passtrough" "POE passtrough disable" "546" "1"
+	;;
 cellc,rtl30vw)
 	ucidef_add_gpio_switch "w_disable" "W_DISABLE mPCIE pin" "398" "1"
 	ucidef_add_gpio_switch "pmd_resin_n" "PMD_RESIN_N pin" "399" "1"