From: Leon M. Busch-George Date: Fri, 13 Oct 2023 10:44:11 +0000 (+0200) Subject: mediatek: add support for YunCore AX835 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b4086f44cd8a739458a0fd12cfaf684515507614;p=openwrt%2Fstaging%2Frmilecki.git mediatek: add support for YunCore AX835 Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 16MB NOR RAM: 256MB Ethernet: 2x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset Power: DC 12V 1A, PoE 802.3af 48V Flash instructions: Option #1 - SSH I was able to SSH into the stock firmware of my device. 1. Attach the router to the network 2. Use scp (-O) to copy the sysupgrade image 3. Connect using SSH and run `sysupgrade -n` Option #2 - U-Boot One way to use the bootloader for flashing is using TFTP: 1. Connect to the router using an ethernet cable 2 Spin up a TFTP server serving the sysupgrade file 3. Open the case and attach a UART 4. Attach power to the router and interrupt the countdown by pressing any key 5. Select option #2 (Upgrade firmware) 6. Enter IP address information and image name 7. Wait patiently Co-Authored-By: Enrique Rodríguez Valencia Co-Authored-By: Hauke Mehrtens Signed-off-by: Leon M. Busch-George --- diff --git a/target/linux/mediatek/dts/mt7981b-yuncore-ax835.dts b/target/linux/mediatek/dts/mt7981b-yuncore-ax835.dts new file mode 100644 index 00000000000..b3ca5bfa2cf --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-yuncore-ax835.dts @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "mt7981.dtsi" + +/ { + compatible = "yuncore,ax835", "mediatek,mt7981"; + model = "YunCore AX835"; + + aliases { + ethernet0 = &gmac0; + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + }; + + reg_led_vbus { + compatible = "regulator-fixed"; + regulator-name = "led_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&pio 5 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + + led_system: led_system { + label = "red:system"; + gpios = <&pio 4 GPIO_ACTIVE_LOW>; + }; + + led_wifi24 { + label = "green:wifi2"; + gpios = <&pio 34 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led_wifi5 { + label = "blue:wifi5"; + gpios = <&pio 35 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + led_hwwatchdog { + // a gpio-wdt watchdog couldn't be made to work. + // the device rebooted after 5 minutes. + label = "hwwatchdog"; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + led-pattern = <1000>, <1000>; + }; + + // there's another "syswatchdog" on gpio2 + }; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + }; + + spi2_flash_pins: spi2-pins { + mux { + function = "spi"; + groups = "spi2", "spi2_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <8>; + bias-pull-up = <103>; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <8>; + bias-pull-down = <103>; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "disabled"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_flash_pins>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@00000 { + label = "BL2"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + read-only; + }; + + factory: partition@50000 { + label = "Factory"; + reg = <0x50000 0x10000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_4: macaddr@4 { + reg = <0x4 0x6>; + }; + + macaddr_factory_24: macaddr@24 { + reg = <0x24 0x6>; + }; + + macaddr_factory_2a: macaddr@2a { + reg = <0x2a 0x6>; + }; + }; + + partition@100000 { + label = "FIP"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x180000 0xe00000>; + }; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + lan: port@3 { + reg = <3>; + label = "lan"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_2a 0>; + }; + + port@4 { + reg = <4>; + label = "wan"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_2a 0>; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + nvmem-cells = <&eeprom_factory 0>; + nvmem-cell-names = "eeprom"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index dd3464b72cc..2a6a97919df 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -66,7 +66,8 @@ mediatek_setup_interfaces() ucidef_set_interface_lan "eth0" ;; smartrg,sdg-8622|\ - smartrg,sdg-8632) + smartrg,sdg-8632|\ + yuncore,ax835) ucidef_set_interfaces_lan_wan lan wan ;; tplink,tl-xdr6086) @@ -170,6 +171,9 @@ mediatek_setup_macs() wan_mac=$(mtd_get_mac_ascii Bdata ethaddr_wan) label_mac=$wan_mac ;; + yuncore,ax835) + label_mac=$(mtd_get_mac_binary "Factory" 0x4) + ;; esac [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 65ec5d8271e..517f4520e14 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -111,7 +111,8 @@ platform_do_upgrade() { ;; esac ;; - cudy,wr3000-v1) + cudy,wr3000-v1|\ + yuncore,ax835) default_do_upgrade "$1" ;; glinet,gl-mt2500|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index c079fae0b00..d0c9907635f 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -880,6 +880,25 @@ endif endef TARGET_DEVICES += xiaomi_redmi-router-ax6000-ubootmod +define Device/yuncore_ax835 + DEVICE_VENDOR := YunCore + DEVICE_MODEL := AX835 + DEVICE_DTS := mt7981b-yuncore-ax835 + DEVICE_DTS_DIR := ../dts + DEVICE_DTS_LOADADDR := 0x47000000 + IMAGES := sysupgrade.bin + IMAGE_SIZE := 14336k + SUPPORTED_DEVICES += mediatek,mt7981-spim-nor-rfb + KERNEL := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata + DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware +endef +TARGET_DEVICES += yuncore_ax835 + + define Device/zbtlink_zbt-z8102ax DEVICE_VENDOR := Zbtlink DEVICE_MODEL := ZBT-Z8102AX