From: Felix Fietkau Date: Thu, 12 Apr 2012 20:35:58 +0000 (+0200) Subject: ath9k: optimize the hardware hang check X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b381fa3229a30f6d7b0e6053314c4a5378c9389d;p=openwrt%2Fstaging%2Fblogic.git ath9k: optimize the hardware hang check Since it's only called when beacons are stuck, move it to the SWBA handler tasklet, to avoid doing redundant checks on every single interrupt. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 626418222c85..df5b6acd805f 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -369,6 +369,9 @@ void ath_beacon_tasklet(unsigned long data) if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) { sc->beacon.bmisscnt++; + if (!ath9k_hw_check_alive(ah)) + ieee80211_queue_work(sc->hw, &sc->hw_check_work); + if (sc->beacon.bmisscnt < BSTUCK_THRESH * sc->nbcnvifs) { ath_dbg(common, BSTUCK, "missed %u consecutive beacons\n", diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index c8d123957188..384e5c498440 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -692,17 +692,6 @@ void ath9k_tasklet(unsigned long data) goto out; } - /* - * Only run the baseband hang check if beacons stop working in AP or - * IBSS mode, because it has a high false positive rate. For station - * mode it should not be necessary, since the upper layers will detect - * this through a beacon miss automatically and the following channel - * change will trigger a hardware reset anyway - */ - if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0 && - !ath9k_hw_check_alive(ah)) - ieee80211_queue_work(sc->hw, &sc->hw_check_work); - if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) { /* * TSF sync does not look correct; remain awake to sync with