From: Paweł Owoc Date: Wed, 13 Mar 2024 11:22:30 +0000 (+0100) Subject: qualcommax: ipq807x: Remove unused gpio from QPIC pins X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b32a17e82df32b197fb64e2588262e2ddb8dccd6;p=openwrt%2Fstaging%2Fwigyori.git qualcommax: ipq807x: Remove unused gpio from QPIC pins Remove gpio16 from the default NAND pinctrl configuration as its unused and only needed for LCD. Signed-off-by: Paweł Owoc Link: https://github.com/openwrt/openwrt/pull/14883 Signed-off-by: Robert Marko --- diff --git a/target/linux/qualcommax/patches-6.6/0063-v6.9-arm64-dts-qcom-ipq8074-Remove-unused-gpio-from-QPIC-.patch b/target/linux/qualcommax/patches-6.6/0063-v6.9-arm64-dts-qcom-ipq8074-Remove-unused-gpio-from-QPIC-.patch new file mode 100644 index 0000000000..e075c590fb --- /dev/null +++ b/target/linux/qualcommax/patches-6.6/0063-v6.9-arm64-dts-qcom-ipq8074-Remove-unused-gpio-from-QPIC-.patch @@ -0,0 +1,32 @@ +From 5f78d9213ae753e2242b0f6a5d4a5e98e55ddc76 Mon Sep 17 00:00:00 2001 +From: Paweł Owoc +Date: Wed, 13 Mar 2024 11:27:06 +0100 +Subject: [PATCH] arm64: dts: qcom: ipq8074: Remove unused gpio from QPIC pins + +gpio16 will only be used for LCD support, as its NAND/LCDC data[8] +so its bit 9 of the parallel QPIC interface, and ONFI NAND is only 8 +or 16-bit with only 8-bit one being supported in our case so that pin +is unused. + +It should be dropped from the default NAND pinctrl configuration +as its unused and only needed for LCD. + +Signed-off-by: Paweł Owoc +Reviewed-by: Kathiravan Thirumoorthy +Link: https://lore.kernel.org/r/20240313102713.1727458-1-frut3k7@gmail.com +Signed-off-by: Bjorn Andersson +--- + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi +@@ -372,7 +372,7 @@ + "gpio5", "gpio6", "gpio7", + "gpio8", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", +- "gpio15", "gpio16", "gpio17"; ++ "gpio15", "gpio17"; + function = "qpic"; + drive-strength = <8>; + bias-disable;