From: Jens Muecke Date: Sun, 28 Oct 2007 21:20:48 +0000 (+0000) Subject: Initial OLPC target X-Git-Tag: reboot~27715 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b314ffdd3abe3babc3ab9d4caea87e2d5da3d8ef;p=openwrt%2Fstaging%2Fnoltari.git Initial OLPC target SVN-Revision: 9457 --- diff --git a/target/linux/olpc/Makefile b/target/linux/olpc/Makefile new file mode 100644 index 0000000000..4ab3375373 --- /dev/null +++ b/target/linux/olpc/Makefile @@ -0,0 +1,23 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH=i386 +BOARD:=olpc +BOARDNAME:=olpc +FEATURES:=squashfs ext2 + +LINUX_VERSION:=2.6.23 + +include $(INCLUDE_DIR)/target.mk +DEFAULT_PACKAGES += kmod-natsemi kmod-ne2k-pci + +$(eval $(call Target,generic)) +$(eval $(call BuildTarget)) +$(eval $(call $(if $(CONFIG_TARGET_ROOTFS_ISO),RequireCommand,Ignore),mkisofs, \ + Please install mkisofs. \ +)) diff --git a/target/linux/olpc/base-files/etc/preinit.arch b/target/linux/olpc/base-files/etc/preinit.arch new file mode 100644 index 0000000000..f29f0d448b --- /dev/null +++ b/target/linux/olpc/base-files/etc/preinit.arch @@ -0,0 +1,2 @@ +mount -t proc none /proc +grep 'failsafe=' /proc/cmdline && export FAILSAFE=true diff --git a/target/linux/olpc/base-files/lib/upgrade/platform.sh b/target/linux/olpc/base-files/lib/upgrade/platform.sh new file mode 100644 index 0000000000..ffd0b93ab4 --- /dev/null +++ b/target/linux/olpc/base-files/lib/upgrade/platform.sh @@ -0,0 +1,27 @@ +platform_check_image() { + [ "$ARGC" -gt 1 ] && return 1 + + case "$(get_magic_word "$1")" in + 48eb) return 0;; + *) + echo "Invalid image type" + return 1 + ;; + esac +} + +platform_do_upgrade() { + get_image "$1" > /dev/hda + sync +} + +x86_prepare_ext2() { + # if we're running from ext2, we need to make sure that we have a mtd + # partition that points to the active rootfs partition. + # however this only matters if we actually need to preserve the config files + [ "$SAVE_CONFIG" -eq 1 ] && return 0 + grep rootfs /proc/mtd >/dev/null || { + echo /dev/hda2,65536,rootfs > /sys/module/block2mtd/parameters/block2mtd + } +} +append sysupgrade_pre_upgrade x86_prepare_ext2 diff --git a/target/linux/olpc/config-2.6.23 b/target/linux/olpc/config-2.6.23 new file mode 100644 index 0000000000..4597d43985 --- /dev/null +++ b/target/linux/olpc/config-2.6.23 @@ -0,0 +1,632 @@ +# CONFIG_3C515 is not set +# CONFIG_60XX_WDT is not set +# CONFIG_8139TOO is not set +# CONFIG_AC3200 is not set +# CONFIG_ACPI is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_AGP is not set +# CONFIG_AIRO is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_APM is not set +# CONFIG_APRICOT is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_AT1700 is not set +# CONFIG_ATM is not set +# CONFIG_AX25 is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_BACKLIGHT_PROGEAR is not set +CONFIG_BASE_SMALL=0 +# CONFIG_BATTERY_DS2760 is not set +CONFIG_BATTERY_OLPC=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y +CONFIG_BITREVERSE=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_HD is not set +# CONFIG_BLK_DEV_HD_IDE is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +CONFIG_BLK_DEV_IDE=y +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_SC1200=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_BLK_DEV_XD is not set +# CONFIG_BONDING is not set +CONFIG_BOUNCE=y +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_BT is not set +CONFIG_CFG80211=m +CONFIG_CHR_DEV_SG=y +# CONFIG_CIFS is not set +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_COMPAT_VDSO=y +# CONFIG_CPU5_WDT is not set +# CONFIG_CPUSETS is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_AES_586 is not set +CONFIG_CRYPTO_ALGAPI=y +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_CRYPTO_KHAZAD is not set +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CS5535_GPIO is not set +# CONFIG_CS89x0 is not set +# CONFIG_DCDBAS is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DELL_RBU is not set +# CONFIG_DEPCA is not set +CONFIG_DEVPORT=y +# CONFIG_DISABLE_CONSOLE_SUSPEND is not set +CONFIG_DISPLAY_SUPPORT=y +CONFIG_DMI=y +CONFIG_DMIID=y +CONFIG_DNOTIFY=y +CONFIG_DOUBLEFAULT=y +CONFIG_DUMMY_CONSOLE=y +# CONFIG_E100 is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_EDAC is not set +# CONFIG_EDD is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_EISA is not set +# CONFIG_EL1 is not set +# CONFIG_EL16 is not set +# CONFIG_EL2 is not set +# CONFIG_EL3 is not set +CONFIG_ELF_CORE=y +# CONFIG_ELPLUS is not set +# CONFIG_EUROTECH_WDT is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT3_FS is not set +CONFIG_FB=y +# CONFIG_FB_3DFX is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_DEFERRED_IO=y +CONFIG_FB_GEODE=y +CONFIG_FB_GEODE_GX=y +# CONFIG_FB_GEODE_GX1 is not set +# CONFIG_FB_GEODE_GX_SET_FBSIZE is not set +CONFIG_FB_GEODE_LX=y +# CONFIG_FB_HECUBA is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_I810 is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_NVIDIA is not set +CONFIG_FB_OLPC_DCON=y +# CONFIG_FB_PM2 is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_VESA is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FIX_EARLYCON_MEM=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x16=y +CONFIG_FONT_8x8=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_GEODE_MFGPT_TIMER=y +# CONFIG_HANGCHECK_TIMER is not set +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HERMES is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_HFS_FS is not set +CONFIG_HIBERNATION=y +CONFIG_HIBERNATION_SMP_POSSIBLE=y +CONFIG_HID=y +CONFIG_HID_SUPPORT=y +# CONFIG_HIGHMEM4G is not set +# CONFIG_HIGHMEM64G is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_HOSTAP is not set +CONFIG_HOTPLUG_CPU=y +# CONFIG_HPET_TIMER is not set +CONFIG_HT_IRQ=y +# CONFIG_HUGETLBFS is not set +CONFIG_HW_CONSOLE=y +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_AMD is not set +CONFIG_HW_RANDOM_GEODE=y +# CONFIG_HW_RANDOM_INTEL is not set +CONFIG_HW_RANDOM_VIA=y +CONFIG_I2C=y +# CONFIG_I2C_ALGOBIT is not set +CONFIG_I2C_BOARDINFO=y +# CONFIG_I6300ESB_WDT is not set +# CONFIG_I8K is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_IBM_ASM is not set +CONFIG_IDE=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_ONLYDISK is not set +CONFIG_IDEPCI_PCIBUS_ORDER=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_IDE_ARM is not set +# CONFIG_IDE_CHIPSETS is not set +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_PROC_FS is not set +# CONFIG_IEEE80211 is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INPUT=y +# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_INPUT_MOUSE=y +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INSTRUMENTATION=y +# CONFIG_IPV6 is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_IPP2P is not set +# CONFIG_IP_NF_MATCH_LAYER7 is not set +# CONFIG_IP_NF_MATCH_OWNER is not set +# CONFIG_IP_NF_MATCH_RECENT is not set +# CONFIG_IP_NF_MATCH_TIME is not set +# CONFIG_IP_NF_MATCH_TOS is not set +# CONFIG_IP_NF_MATCH_TTL is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_SET is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_IMQ is not set +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_IP_NF_TARGET_TOS is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_IRQBALANCE=y +CONFIG_ISA=y +CONFIG_ISAPNP=y +CONFIG_ISA_DMA_API=y +# CONFIG_ISDN is not set +# CONFIG_ISO9660_FS is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_KALLSYMS=y +CONFIG_KEXEC=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KMOD=y +# CONFIG_KPROBES is not set +CONFIG_KTIME_SCALAR=y +# CONFIG_KVM is not set +# CONFIG_LANCE is not set +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LOCALVERSION_AUTO=y +CONFIG_LOCK_KERNEL=y +# CONFIG_LOGO is not set +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586MMX is not set +# CONFIG_M586TSC is not set +# CONFIG_M686 is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_MATH_EMULATION=y +# CONFIG_MCA is not set +# CONFIG_MCORE2 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MDA_CONSOLE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MGEODEGX1 is not set +CONFIG_MGEODE_LX=y +CONFIG_MICROCODE=y +CONFIG_MICROCODE_OLD_INTERFACE=y +# CONFIG_MINIX_FS is not set +# CONFIG_MIXCOMWD is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_SDHCI=y +# CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_UNSAFE_RESUME is not set +# CONFIG_MMC_WBSD is not set +CONFIG_MODVERSIONS=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_OLPC=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MSDOS_FS is not set +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_BLOCK2MTD=y +# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CHAR=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_CS553X is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_OOPS=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_PCI=y +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_TS5500 is not set +CONFIG_MTRR=y +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +CONFIG_NETDEV_1000=y +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_PORTSCAN is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_CHAOS is not set +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DELUDE is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_KEY is not set +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_ESFQ is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_INGRESS is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_TEQL is not set +CONFIG_NET_VENDOR_3COM=y +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_NFSD is not set +# CONFIG_NFS_FS is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +# CONFIG_NF_CONNTRACK_H323 is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_RTSP is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_H323 is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_RTSP is not set +# CONFIG_NF_NAT_SIP is not set +# CONFIG_NF_NAT_SNMP_BASIC is not set +# CONFIG_NLS is not set +CONFIG_NOHIGHMEM=y +# CONFIG_NO_HZ is not set +CONFIG_NR_CPUS=8 +CONFIG_NR_QUICK=1 +CONFIG_NSC_GPIO=m +CONFIG_NVRAM=y +CONFIG_OLPC=y +CONFIG_OLPC_PM=y +CONFIG_OPEN_FIRMWARE=y +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PARAVIRT is not set +CONFIG_PC8736x_GPIO=m +# CONFIG_PC87413_WDT is not set +CONFIG_PCCARD=m +CONFIG_PCCARD_NONSTATIC=m +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCIPCWATCHDOG is not set +CONFIG_PCI_DIRECT=y +# CONFIG_PCI_GOANY is not set +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GODIRECT is not set +# CONFIG_PCI_GOMMCONFIG is not set +CONFIG_PCI_GOOLPC=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_OLPC=y +CONFIG_PCMCIA_PROBE=y +# CONFIG_PCWATCHDOG is not set +# CONFIG_PDA_POWER is not set +CONFIG_PHYSICAL_ALIGN=0x100000 +CONFIG_PHYSICAL_START=0x100000 +CONFIG_PM=y +CONFIG_PM_DEBUG=y +CONFIG_PM_LEGACY=y +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_STD_PARTITION="" +# CONFIG_PM_TRACE is not set +# CONFIG_PM_VERBOSE is not set +CONFIG_PNP=y +# CONFIG_PNPACPI is not set +# CONFIG_PNPBIOS is not set +# CONFIG_PNP_DEBUG is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PREEMPT_BKL=y +# CONFIG_PRISM54 is not set +# CONFIG_PROMFS_FS is not set +CONFIG_QUICKLIST=y +CONFIG_RELAY=y +# CONFIG_RELOCATABLE is not set +CONFIG_RTC=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_SBC8360_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_SC520_WDT is not set +CONFIG_SCHED_MC=y +CONFIG_SCHED_SMT=y +CONFIG_SCSI=y +CONFIG_SCSI_WAIT_SCAN=m +CONFIG_SCx200=y +CONFIG_SCx200HR_TIMER=y +# CONFIG_SCx200_ACB is not set +# CONFIG_SCx200_GPIO is not set +CONFIG_SCx200_WDT=m +CONFIG_SEMAPHORE_SLEEPERS=y +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_PNP=y +CONFIG_SERIO=y +# CONFIG_SERIO_CT82C710 is not set +CONFIG_SERIO_I8042=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_SERPORT=y +CONFIG_SMP=y +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SONYPI is not set +# CONFIG_SOUND is not set +CONFIG_SPARSEMEM_STATIC=y +CONFIG_STOP_MACHINE=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_SMP_POSSIBLE=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_TELCLOCK is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_TOSHIBA is not set +# CONFIG_TUN is not set +# CONFIG_TYPHOON is not set +# CONFIG_UDF_FS is not set +CONFIG_UID16=y +# CONFIG_USB is not set +# CONFIG_USER_NS is not set +# CONFIG_VFAT_FS is not set +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +# CONFIG_VGASTATE is not set +CONFIG_VGA_CONSOLE=y +# CONFIG_VGA_NOPROBE is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_SELECT=y +CONFIG_VIRTUALIZATION=y +CONFIG_VM86=y +# CONFIG_VMSPLIT_1G is not set +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_2G_OPT is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_3G_OPT is not set +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_VORTEX is not set +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_WDT is not set +CONFIG_X86=y +CONFIG_X86_32=y +# CONFIG_X86_BIGSMP is not set +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_BSWAP=y +CONFIG_X86_CMPXCHG=y +# CONFIG_X86_CPUID is not set +# CONFIG_X86_ELAN is not set +# CONFIG_X86_ES7000 is not set +CONFIG_X86_FIND_SMP_CONFIG=y +CONFIG_X86_GENERIC=y +# CONFIG_X86_GENERICARCH is not set +CONFIG_X86_HT=y +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_INVLPG=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_MCE=y +# CONFIG_X86_MCE_NONFATAL is not set +# CONFIG_X86_MCE_P4THERMAL is not set +CONFIG_X86_MINIMUM_CPU_FAMILY=4 +CONFIG_X86_MPPARSE=y +# CONFIG_X86_MSR is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_PAE is not set +CONFIG_X86_PC=y +CONFIG_X86_POPAD_OK=y +# CONFIG_X86_REBOOTFIXUPS is not set +CONFIG_X86_SMP=y +# CONFIG_X86_SUMMIT is not set +CONFIG_X86_TRAMPOLINE=y +CONFIG_X86_TSC=y +CONFIG_X86_USE_3DNOW=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +# CONFIG_X86_VISWS is not set +# CONFIG_X86_VOYAGER is not set +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_XADD=y +# CONFIG_XFS_FS is not set +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_TOSHIBA=y diff --git a/target/linux/olpc/generic/profiles/000-Generic.mk b/target/linux/olpc/generic/profiles/000-Generic.mk new file mode 100644 index 0000000000..d7e6b7eb1e --- /dev/null +++ b/target/linux/olpc/generic/profiles/000-Generic.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Generic + NAME:=Generic + PACKAGES:= +endef + +define Profile/Generic/Description + Generic Profile +endef +$(eval $(call Profile,Generic)) diff --git a/target/linux/olpc/generic/target.mk b/target/linux/olpc/generic/target.mk new file mode 100644 index 0000000000..ea16d63797 --- /dev/null +++ b/target/linux/olpc/generic/target.mk @@ -0,0 +1,6 @@ +SUBTARGET:=generic + +define Target/Description + Build firmware images for OLPC +endef + diff --git a/target/linux/olpc/image/Config.in b/target/linux/olpc/image/Config.in new file mode 100644 index 0000000000..6252ae6d1f --- /dev/null +++ b/target/linux/olpc/image/Config.in @@ -0,0 +1,35 @@ +config OLPC_GRUB_IMAGES + bool "Build GRUB images" + depends TARGET_olpc + depends TARGET_ROOTFS_EXT2FS || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS || TARGET_ROOTFS_ISO + select PACKAGE_grub + default y + +config OLPC_GRUB_IMAGES_PAD + bool "Pad GRUB images to filesystem size (for JFFS2)" + depends OLPC_GRUB_IMAGES + +config OLPC_GRUB_BAUDRATE + int "Serial port baud rate" + depends OLPC_GRUB_IMAGES + default 38400 + +config OLPC_GRUB_KERNELPART + int "Kernel partition size (in MB)" + depends OLPC_GRUB_IMAGES + default 4 + +config OLPC_GRUB_ROOTPART + string + prompt "Root partition on target device" if OLPC_GRUB_IMAGES + default "/dev/hda2" + help + The root partition on the final device. If you don't know, + you probably want the default (/dev/hda2). + +config OLPC_GRUB_BOOTOPTS + string + prompt "Extra kernel boot options" if OLPC_GRUB_IMAGES + default "" + help + If you don't know, just leave it blank. diff --git a/target/linux/olpc/image/Makefile b/target/linux/olpc/image/Makefile new file mode 100644 index 0000000000..14050bb7f6 --- /dev/null +++ b/target/linux/olpc/image/Makefile @@ -0,0 +1,82 @@ +# +# Copyright (C) 2007 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +export PATH=$(TARGET_PATH):/sbin +BOOTOPTS=$(strip $(subst ",, $(CONFIG_OLPC_GRUB_BOOTOPTS))) +ROOTPART=$(strip $(subst ",, $(CONFIG_OLPC_GRUB_ROOTPART))) +#"))")) # fix vim's broken syntax highlighting + + +ifeq ($(CONFIG_OLPC_GRUB_IMAGES),y) + define Image/cmdline/squashfs + block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs init=/etc/preinit + endef + + define Image/cmdline/jffs2-64k + block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit + endef + + define Image/cmdline/jffs2-128k + block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit + endef + + define Image/cmdline/ext2 + root=$(ROOTPART) rootfstype=ext2 init=/etc/preinit + endef + + define Image/Build/grub + # left here because the image builder doesnt need these + $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub + $(CP) \ + $(KDIR)/*stage* \ + $(KDIR)/root.grub/boot/grub/ + $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz + $(CP) ./olpc.fth $(KDIR)/root.grub/boot/olpc.fth + sed \ + -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \ + -e 's#@BAUDRATE@#$(CONFIG_OLPC_GRUB_BAUDRATE)#g' \ + ./menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst + PADDING="$(CONFIG_OLPC_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image $(CONFIG_OLPC_GRUB_KERNELPART) $(KDIR)/root.grub $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1) + $(call Image/Build/grub/$(1)) + endef +endif + +ifeq ($(CONFIG_OLPC_GRUB_IMAGES),y) + define Image/Prepare/grub + # for the image builder + $(CP) \ + $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/stage1 \ + $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/stage2 \ + $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/e2fs_stage1_5 \ + $(KDIR)/ + endef +endif + +define Image/Prepare + $(CP) $(LINUX_DIR)/arch/i386/boot/bzImage $(KDIR)/bzImage + $(call Image/Prepare/grub) +endef + +define Image/Build/squashfs + $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) +endef + +define Image/BuildKernel + $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz +endef + +define Image/Build + $(call Image/Build/$(1)) + $(call Image/Build/grub,$(1)) + $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).fs + $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz +endef + +$(eval $(call BuildImage)) + diff --git a/target/linux/olpc/image/gen_image.sh b/target/linux/olpc/image/gen_image.sh new file mode 100755 index 0000000000..d48e3720dc --- /dev/null +++ b/target/linux/olpc/image/gen_image.sh @@ -0,0 +1,45 @@ +#!/usr/bin/env bash +# Copyright (C) 2006 OpenWrt.org +set -x +[ $# == 5 ] || { + echo "SYNTAX: $0 " + exit 1 +} + +OUTPUT="$1" +KERNELSIZE="$2" +KERNELDIR="$3" +ROOTFSSIZE="$4" +ROOTFSIMAGE="$5" + +rm -f "$OUTPUT" + +head=16 +sect=63 +cyl=$(( ($KERNELSIZE + $ROOTFSSIZE) * 1024 * 1024 / ($head * $sect * 512))) + +# create partition table +set `ptgen -o "$OUTPUT" -h $head -s $sect -p ${KERNELSIZE}m -p ${ROOTFSSIZE}m` + +KERNELOFFSET="$(($1 / 512))" +KERNELSIZE="$(($2 / 512))" +ROOTFSOFFSET="$(($3 / 512))" +ROOTFSSIZE="$(($4 / 512))" + +BLOCKS="$((($KERNELSIZE / 2) - 1))" + +genext2fs -d "$KERNELDIR" -b "$BLOCKS" "$OUTPUT.kernel" +dd if="$OUTPUT.kernel" of="$OUTPUT" bs=512 seek="$KERNELOFFSET" conv=notrunc +[ -n "$PADDING" ] && dd if=/dev/zero of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc count="$ROOTFSSIZE" +dd if="$ROOTFSIMAGE" of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc +#rm -f "$OUTPUT.kernel" + +which chpax >/dev/null && chpax -zp $(which grub) +grub --batch --no-curses --no-floppy --device-map=/dev/null <, ++ * ++ * Video handling moved to video.S by Martin Mares, March 1996 ++ * ++ * ++ * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david ++ * parsons) to avoid loadlin confusion, July 1997 ++ * ++ * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999. ++ * ++ * ++ * Fix to work around buggy BIOSes which don't use carry bit correctly ++ * and/or report extended memory in CX/DX for e801h memory size detection ++ * call. As a result the kernel got wrong figures. The int15/e801h docs ++ * from Ralf Brown interrupt list seem to indicate AX/BX should be used ++ * anyway. So to avoid breaking many machines (presumably there was a reason ++ * to orginally use CX/DX instead of AX/BX), we do a kludge to see ++ * if CX/DX have been changed in the e801 call and if so use AX/BX . ++ * Michael Miller, April 2001 ++ * ++ * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes ++ * by Robert Schwebel, December 2001 ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* Signature words to ensure LILO loaded us right */ ++#define SIG1 0xAA55 ++#define SIG2 0x5A5A ++ ++INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way ++SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536). ++SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment ++ # ... and the former contents of CS ++ ++DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020 ++ ++.code16 ++.globl begtext, begdata, begbss, endtext, enddata, endbss ++ ++.text ++begtext: ++.data ++begdata: ++.bss ++begbss: ++.text ++ ++start: ++ jmp trampoline ++ ++# This is the setup header, and it must start at %cs:2 (old 0x9020:2) ++ ++ .ascii "HdrS" # header signature ++ .word 0x0206 # header version number (>= 0x0105) ++ # or else old loadlin-1.5 will fail) ++realmode_swtch: .word 0, 0 # default_switch, SETUPSEG ++start_sys_seg: .word SYSSEG ++ .word kernel_version # pointing to kernel version string ++ # above section of header is compatible ++ # with loadlin-1.5 (header v1.5). Don't ++ # change it. ++ ++type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin, ++ # Bootlin, SYSLX, bootsect...) ++ # See Documentation/i386/boot.txt for ++ # assigned ids ++ ++# flags, unused bits must be zero (RFU) bit within loadflags ++loadflags: ++LOADED_HIGH = 1 # If set, the kernel is loaded high ++CAN_USE_HEAP = 0x80 # If set, the loader also has set ++ # heap_end_ptr to tell how much ++ # space behind setup.S can be used for ++ # heap purposes. ++ # Only the loader knows what is free ++#ifndef __BIG_KERNEL__ ++ .byte 0 ++#else ++ .byte LOADED_HIGH ++#endif ++ ++setup_move_size: .word 0x8000 # size to move, when setup is not ++ # loaded at 0x90000. We will move setup ++ # to 0x90000 then just before jumping ++ # into the kernel. However, only the ++ # loader knows how much data behind ++ # us also needs to be loaded. ++ ++code32_start: # here loaders can put a different ++ # start address for 32-bit code. ++#ifndef __BIG_KERNEL__ ++ .long 0x1000 # 0x1000 = default for zImage ++#else ++ .long 0x100000 # 0x100000 = default for big kernel ++#endif ++ ++ramdisk_image: .long 0 # address of loaded ramdisk image ++ # Here the loader puts the 32-bit ++ # address where it loaded the image. ++ # This only will be read by the kernel. ++ ++ramdisk_size: .long 0 # its size in bytes ++ ++bootsect_kludge: ++ .long 0 # obsolete ++ ++heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later) ++ # space from here (exclusive) down to ++ # end of setup code can be used by setup ++ # for local heap purposes. ++ ++pad1: .word 0 ++cmd_line_ptr: .long 0 # (Header version 0x0202 or later) ++ # If nonzero, a 32-bit pointer ++ # to the kernel command line. ++ # The command line should be ++ # located between the start of ++ # setup and the end of low ++ # memory (0xa0000), or it may ++ # get overwritten before it ++ # gets read. If this field is ++ # used, there is no longer ++ # anything magical about the ++ # 0x90000 segment; the setup ++ # can be located anywhere in ++ # low memory 0x10000 or higher. ++ ++ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff ++ # (Header version 0x0203 or later) ++ # The highest safe address for ++ # the contents of an initrd ++ ++kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment ++ #required for protected mode ++ #kernel ++#ifdef CONFIG_RELOCATABLE ++relocatable_kernel: .byte 1 ++#else ++relocatable_kernel: .byte 0 ++#endif ++pad2: .byte 0 ++pad3: .word 0 ++ ++cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, ++ #added with boot protocol ++ #version 2.06 ++ ++trampoline: call start_of_setup ++ .align 16 ++ # The offset at this point is 0x240 ++ .space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff) ++# End of setup header ##################################################### ++ ++start_of_setup: ++# Bootlin depends on this being done early ++ movw $0x01500, %ax ++ movb $0x81, %dl ++ int $0x13 ++ ++#ifdef SAFE_RESET_DISK_CONTROLLER ++# Reset the disk controller. ++ movw $0x0000, %ax ++ movb $0x80, %dl ++ int $0x13 ++#endif ++ ++# Set %ds = %cs, we know that SETUPSEG = %cs at this point ++ movw %cs, %ax # aka SETUPSEG ++ movw %ax, %ds ++# Check signature at end of setup ++ cmpw $SIG1, setup_sig1 ++ jne bad_sig ++ ++ cmpw $SIG2, setup_sig2 ++ jne bad_sig ++ ++ jmp good_sig1 ++ ++# Routine to print asciiz string at ds:si ++prtstr: ++ lodsb ++ andb %al, %al ++ jz fin ++ ++ call prtchr ++ jmp prtstr ++ ++fin: ret ++ ++# Space printing ++prtsp2: call prtspc # Print double space ++prtspc: movb $0x20, %al # Print single space (note: fall-thru) ++ ++# Part of above routine, this one just prints ascii al ++prtchr: pushw %ax ++ pushw %cx ++ movw $7,%bx ++ movw $0x01, %cx ++ movb $0x0e, %ah ++ int $0x10 ++ popw %cx ++ popw %ax ++ ret ++ ++beep: movb $0x07, %al ++ jmp prtchr ++ ++no_sig_mess: .string "No setup signature found ..." ++ ++good_sig1: ++ jmp good_sig ++ ++# We now have to find the rest of the setup code/data ++bad_sig: ++ movw %cs, %ax # SETUPSEG ++ subw $DELTA_INITSEG, %ax # INITSEG ++ movw %ax, %ds ++ xorb %bh, %bh ++ movb (497), %bl # get setup sect from bootsect ++ subw $4, %bx # LILO loads 4 sectors of setup ++ shlw $8, %bx # convert to words (1sect=2^8 words) ++ movw %bx, %cx ++ shrw $3, %bx # convert to segment ++ addw $SYSSEG, %bx ++ movw %bx, %cs:start_sys_seg ++# Move rest of setup code/data to here ++ movw $2048, %di # four sectors loaded by LILO ++ subw %si, %si ++ pushw %cs ++ popw %es ++ movw $SYSSEG, %ax ++ movw %ax, %ds ++ rep ++ movsw ++ movw %cs, %ax # aka SETUPSEG ++ movw %ax, %ds ++ cmpw $SIG1, setup_sig1 ++ jne no_sig ++ ++ cmpw $SIG2, setup_sig2 ++ jne no_sig ++ ++ jmp good_sig ++ ++no_sig: ++ lea no_sig_mess, %si ++ call prtstr ++ ++no_sig_loop: ++ hlt ++ jmp no_sig_loop ++ ++good_sig: ++ movw %cs, %ax # aka SETUPSEG ++ subw $DELTA_INITSEG, %ax # aka INITSEG ++ movw %ax, %ds ++# Check if an old loader tries to load a big-kernel ++ testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel? ++ jz loader_ok # No, no danger for old loaders. ++ ++ cmpb $0, %cs:type_of_loader # Do we have a loader that ++ # can deal with us? ++ jnz loader_ok # Yes, continue. ++ ++ pushw %cs # No, we have an old loader, ++ popw %ds # die. ++ lea loader_panic_mess, %si ++ call prtstr ++ ++ jmp no_sig_loop ++ ++loader_panic_mess: .string "Wrong loader, giving up..." ++ ++# check minimum cpuid ++# we do this here because it is the last place we can actually ++# show a user visible error message. Later the video modus ++# might be already messed up. ++loader_ok: ++ call verify_cpu ++ testl %eax,%eax ++ jz cpu_ok ++ movw %cs,%ax # aka SETUPSEG ++ movw %ax,%ds ++ lea cpu_panic_mess,%si ++ call prtstr ++1: jmp 1b ++ ++cpu_panic_mess: ++ .asciz "PANIC: CPU too old for this kernel." ++ ++#include "../kernel/verify_cpu.S" ++ ++cpu_ok: ++# Get memory size (extended mem, kB) ++ ++ xorl %eax, %eax ++ movl %eax, (0x1e0) ++#ifndef STANDARD_MEMORY_BIOS_CALL ++ movb %al, (E820NR) ++# Try three different memory detection schemes. First, try ++# e820h, which lets us assemble a memory map, then try e801h, ++# which returns a 32-bit memory size, and finally 88h, which ++# returns 0-64m ++ ++# method E820H: ++# the memory map from hell. e820h returns memory classified into ++# a whole bunch of different types, and allows memory holes and ++# everything. We scan through this memory map and build a list ++# of the first 32 memory areas, which we return at [E820MAP]. ++# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification. ++ ++#define SMAP 0x534d4150 ++ ++meme820: ++ xorl %ebx, %ebx # continuation counter ++ movw $E820MAP, %di # point into the whitelist ++ # so we can have the bios ++ # directly write into it. ++ ++jmpe820: ++ movl $0x0000e820, %eax # e820, upper word zeroed ++ movl $SMAP, %edx # ascii 'SMAP' ++ movl $20, %ecx # size of the e820rec ++ pushw %ds # data record. ++ popw %es ++ int $0x15 # make the call ++ jc bail820 # fall to e801 if it fails ++ ++ cmpl $SMAP, %eax # check the return is `SMAP' ++ jne bail820 # fall to e801 if it fails ++ ++# cmpl $1, 16(%di) # is this usable memory? ++# jne again820 ++ ++ # If this is usable memory, we save it by simply advancing %di by ++ # sizeof(e820rec). ++ # ++good820: ++ movb (E820NR), %al # up to 128 entries ++ cmpb $E820MAX, %al ++ jae bail820 ++ ++ incb (E820NR) ++ movw %di, %ax ++ addw $20, %ax ++ movw %ax, %di ++again820: ++ cmpl $0, %ebx # check to see if ++ jne jmpe820 # %ebx is set to EOF ++bail820: ++ ++ ++# method E801H: ++# memory size is in 1k chunksizes, to avoid confusing loadlin. ++# we store the 0xe801 memory size in a completely different place, ++# because it will most likely be longer than 16 bits. ++# (use 1e0 because that's what Larry Augustine uses in his ++# alternative new memory detection scheme, and it's sensible ++# to write everything into the same place.) ++ ++meme801: ++ stc # fix to work around buggy ++ xorw %cx,%cx # BIOSes which don't clear/set ++ xorw %dx,%dx # carry on pass/error of ++ # e801h memory size call ++ # or merely pass cx,dx though ++ # without changing them. ++ movw $0xe801, %ax ++ int $0x15 ++ jc mem88 ++ ++ cmpw $0x0, %cx # Kludge to handle BIOSes ++ jne e801usecxdx # which report their extended ++ cmpw $0x0, %dx # memory in AX/BX rather than ++ jne e801usecxdx # CX/DX. The spec I have read ++ movw %ax, %cx # seems to indicate AX/BX ++ movw %bx, %dx # are more reasonable anyway... ++ ++e801usecxdx: ++ andl $0xffff, %edx # clear sign extend ++ shll $6, %edx # and go from 64k to 1k chunks ++ movl %edx, (0x1e0) # store extended memory size ++ andl $0xffff, %ecx # clear sign extend ++ addl %ecx, (0x1e0) # and add lower memory into ++ # total size. ++ ++# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or ++# 64mb, depending on the bios) in ax. ++mem88: ++ ++#endif ++ movb $0x88, %ah ++ int $0x15 ++ movw %ax, (2) ++ ++# Set the keyboard repeat rate to the max ++ movw $0x0305, %ax ++ xorw %bx, %bx ++ int $0x16 ++ ++#ifndef CONFIG_VGA_NOPROBE ++ ++# Check for video adapter and its parameters and allow the ++# user to browse video modes. ++ call video # NOTE: we need %ds pointing ++ # to bootsector ++#endif ++ ++# Get hd0 data... ++ xorw %ax, %ax ++ movw %ax, %ds ++ ldsw (4 * 0x41), %si ++ movw %cs, %ax # aka SETUPSEG ++ subw $DELTA_INITSEG, %ax # aka INITSEG ++ pushw %ax ++ movw %ax, %es ++ movw $0x0080, %di ++ movw $0x10, %cx ++ pushw %cx ++ cld ++ rep ++ movsb ++# Get hd1 data... ++ xorw %ax, %ax ++ movw %ax, %ds ++ ldsw (4 * 0x46), %si ++ popw %cx ++ popw %es ++ movw $0x0090, %di ++ rep ++ movsb ++# Check that there IS a hd1 :-) ++ movw $0x01500, %ax ++ movb $0x81, %dl ++ int $0x13 ++ jc no_disk1 ++ ++ cmpb $3, %ah ++ je is_disk1 ++ ++no_disk1: ++ movw %cs, %ax # aka SETUPSEG ++ subw $DELTA_INITSEG, %ax # aka INITSEG ++ movw %ax, %es ++ movw $0x0090, %di ++ movw $0x10, %cx ++ xorw %ax, %ax ++ cld ++ rep ++ stosb ++is_disk1: ++# check for Micro Channel (MCA) bus ++ movw %cs, %ax # aka SETUPSEG ++ subw $DELTA_INITSEG, %ax # aka INITSEG ++ movw %ax, %ds ++ xorw %ax, %ax ++ movw %ax, (0xa0) # set table length to 0 ++ movb $0xc0, %ah ++ stc ++ int $0x15 # moves feature table to es:bx ++ jc no_mca ++ ++ pushw %ds ++ movw %es, %ax ++ movw %ax, %ds ++ movw %cs, %ax # aka SETUPSEG ++ subw $DELTA_INITSEG, %ax # aka INITSEG ++ movw %ax, %es ++ movw %bx, %si ++ movw $0xa0, %di ++ movw (%si), %cx ++ addw $2, %cx # table length is a short ++ cmpw $0x10, %cx ++ jc sysdesc_ok ++ ++ movw $0x10, %cx # we keep only first 16 bytes ++sysdesc_ok: ++ rep ++ movsb ++ popw %ds ++no_mca: ++#ifdef CONFIG_X86_VOYAGER ++ movb $0xff, 0x40 # flag on config found ++ movb $0xc0, %al ++ mov $0xff, %ah ++ int $0x15 # put voyager config info at es:di ++ jc no_voyager ++ movw $0x40, %si # place voyager info in apm table ++ cld ++ movw $7, %cx ++voyager_rep: ++ movb %es:(%di), %al ++ movb %al,(%si) ++ incw %di ++ incw %si ++ decw %cx ++ jnz voyager_rep ++no_voyager: ++#endif ++# Check for PS/2 pointing device ++ movw %cs, %ax # aka SETUPSEG ++ subw $DELTA_INITSEG, %ax # aka INITSEG ++ movw %ax, %ds ++ movb $0, (0x1ff) # default is no pointing device ++ int $0x11 # int 0x11: equipment list ++ testb $0x04, %al # check if mouse installed ++ jz no_psmouse ++ ++ movb $0xAA, (0x1ff) # device present ++no_psmouse: ++ ++#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) ++ movl $0x0000E980, %eax # IST Support ++ movl $0x47534943, %edx # Request value ++ int $0x15 ++ ++ movl %eax, (96) ++ movl %ebx, (100) ++ movl %ecx, (104) ++ movl %edx, (108) ++#endif ++ ++#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE) ++# Then check for an APM BIOS... ++ # %ds points to the bootsector ++ movw $0, 0x40 # version = 0 means no APM BIOS ++ movw $0x05300, %ax # APM BIOS installation check ++ xorw %bx, %bx ++ int $0x15 ++ jc done_apm_bios # Nope, no APM BIOS ++ ++ cmpw $0x0504d, %bx # Check for "PM" signature ++ jne done_apm_bios # No signature, no APM BIOS ++ ++ andw $0x02, %cx # Is 32 bit supported? ++ je done_apm_bios # No 32-bit, no (good) APM BIOS ++ ++ movw $0x05304, %ax # Disconnect first just in case ++ xorw %bx, %bx ++ int $0x15 # ignore return code ++ movw $0x05303, %ax # 32 bit connect ++ xorl %ebx, %ebx ++ xorw %cx, %cx # paranoia :-) ++ xorw %dx, %dx # ... ++ xorl %esi, %esi # ... ++ xorw %di, %di # ... ++ int $0x15 ++ jc no_32_apm_bios # Ack, error. ++ ++ movw %ax, (66) # BIOS code segment ++ movl %ebx, (68) # BIOS entry point offset ++ movw %cx, (72) # BIOS 16 bit code segment ++ movw %dx, (74) # BIOS data segment ++ movl %esi, (78) # BIOS code segment lengths ++ movw %di, (82) # BIOS data segment length ++# Redo the installation check as the 32 bit connect ++# modifies the flags returned on some BIOSs ++ movw $0x05300, %ax # APM BIOS installation check ++ xorw %bx, %bx ++ xorw %cx, %cx # paranoia ++ int $0x15 ++ jc apm_disconnect # error -> shouldn't happen ++ ++ cmpw $0x0504d, %bx # check for "PM" signature ++ jne apm_disconnect # no sig -> shouldn't happen ++ ++ movw %ax, (64) # record the APM BIOS version ++ movw %cx, (76) # and flags ++ jmp done_apm_bios ++ ++apm_disconnect: # Tidy up ++ movw $0x05304, %ax # Disconnect ++ xorw %bx, %bx ++ int $0x15 # ignore return code ++ ++ jmp done_apm_bios ++ ++no_32_apm_bios: ++ andw $0xfffd, (76) # remove 32 bit support bit ++done_apm_bios: ++#endif ++ ++#include "edd.S" ++ ++# Now we want to move to protected mode ... ++ cmpw $0, %cs:realmode_swtch ++ jz rmodeswtch_normal ++ ++ lcall *%cs:realmode_swtch ++ ++ jmp rmodeswtch_end ++ ++rmodeswtch_normal: ++ pushw %cs ++ call default_switch ++ ++rmodeswtch_end: ++# Now we move the system to its rightful place ... but we check if we have a ++# big-kernel. In that case we *must* not move it ... ++ testb $LOADED_HIGH, %cs:loadflags ++ jz do_move0 # .. then we have a normal low ++ # loaded zImage ++ # .. or else we have a high ++ # loaded bzImage ++ jmp end_move # ... and we skip moving ++ ++do_move0: ++ movw $0x100, %ax # start of destination segment ++ movw %cs, %bp # aka SETUPSEG ++ subw $DELTA_INITSEG, %bp # aka INITSEG ++ movw %cs:start_sys_seg, %bx # start of source segment ++ cld ++do_move: ++ movw %ax, %es # destination segment ++ incb %ah # instead of add ax,#0x100 ++ movw %bx, %ds # source segment ++ addw $0x100, %bx ++ subw %di, %di ++ subw %si, %si ++ movw $0x800, %cx ++ rep ++ movsw ++ cmpw %bp, %bx # assume start_sys_seg > 0x200, ++ # so we will perhaps read one ++ # page more than needed, but ++ # never overwrite INITSEG ++ # because destination is a ++ # minimum one page below source ++ jb do_move ++ ++end_move: ++# then we load the segment descriptors ++ movw %cs, %ax # aka SETUPSEG ++ movw %ax, %ds ++ ++# Check whether we need to be downward compatible with version <=201 ++ cmpl $0, cmd_line_ptr ++ jne end_move_self # loader uses version >=202 features ++ cmpb $0x20, type_of_loader ++ je end_move_self # bootsect loader, we know of it ++ ++# Boot loader doesnt support boot protocol version 2.02. ++# If we have our code not at 0x90000, we need to move it there now. ++# We also then need to move the params behind it (commandline) ++# Because we would overwrite the code on the current IP, we move ++# it in two steps, jumping high after the first one. ++ movw %cs, %ax ++ cmpw $SETUPSEG, %ax ++ je end_move_self ++ ++ cli # make sure we really have ++ # interrupts disabled ! ++ # because after this the stack ++ # should not be used ++ subw $DELTA_INITSEG, %ax # aka INITSEG ++ movw %ss, %dx ++ cmpw %ax, %dx ++ jb move_self_1 ++ ++ addw $INITSEG, %dx ++ subw %ax, %dx # this will go into %ss after ++ # the move ++move_self_1: ++ movw %ax, %ds ++ movw $INITSEG, %ax # real INITSEG ++ movw %ax, %es ++ movw %cs:setup_move_size, %cx ++ std # we have to move up, so we use ++ # direction down because the ++ # areas may overlap ++ movw %cx, %di ++ decw %di ++ movw %di, %si ++ subw $move_self_here+0x200, %cx ++ rep ++ movsb ++ ljmp $SETUPSEG, $move_self_here ++ ++move_self_here: ++ movw $move_self_here+0x200, %cx ++ rep ++ movsb ++ movw $SETUPSEG, %ax ++ movw %ax, %ds ++ movw %dx, %ss ++end_move_self: # now we are at the right place ++ ++# ++# Enable A20. This is at the very best an annoying procedure. ++# A20 code ported from SYSLINUX 1.52-1.63 by H. Peter Anvin. ++# AMD Elan bug fix by Robert Schwebel. ++# ++ ++#if defined(CONFIG_X86_ELAN) ++ movb $0x02, %al # alternate A20 gate ++ outb %al, $0x92 # this works on SC410/SC520 ++a20_elan_wait: ++ call a20_test ++ jz a20_elan_wait ++ jmp a20_done ++#endif ++ ++ ++A20_TEST_LOOPS = 32 # Iterations per wait ++A20_ENABLE_LOOPS = 255 # Total loops to try ++ ++ ++#ifndef CONFIG_X86_VOYAGER ++a20_try_loop: ++ ++ # First, see if we are on a system with no A20 gate. ++a20_none: ++ call a20_test ++ jnz a20_done ++ ++ # Next, try the BIOS (INT 0x15, AX=0x2401) ++a20_bios: ++ movw $0x2401, %ax ++ pushfl # Be paranoid about flags ++ int $0x15 ++ popfl ++ ++ call a20_test ++ jnz a20_done ++ ++ # Try enabling A20 through the keyboard controller ++#endif /* CONFIG_X86_VOYAGER */ ++a20_kbc: ++ call empty_8042 ++ ++#ifndef CONFIG_X86_VOYAGER ++ call a20_test # Just in case the BIOS worked ++ jnz a20_done # but had a delayed reaction. ++#endif ++ ++ movb $0xD1, %al # command write ++ outb %al, $0x64 ++ call empty_8042 ++ ++ movb $0xDF, %al # A20 on ++ outb %al, $0x60 ++ call empty_8042 ++ ++#ifndef CONFIG_X86_VOYAGER ++ # Wait until a20 really *is* enabled; it can take a fair amount of ++ # time on certain systems; Toshiba Tecras are known to have this ++ # problem. ++a20_kbc_wait: ++ xorw %cx, %cx ++a20_kbc_wait_loop: ++ call a20_test ++ jnz a20_done ++ loop a20_kbc_wait_loop ++ ++ # Final attempt: use "configuration port A" ++a20_fast: ++ inb $0x92, %al # Configuration Port A ++ orb $0x02, %al # "fast A20" version ++ andb $0xFE, %al # don't accidentally reset ++ outb %al, $0x92 ++ ++ # Wait for configuration port A to take effect ++a20_fast_wait: ++ xorw %cx, %cx ++a20_fast_wait_loop: ++ call a20_test ++ jnz a20_done ++ loop a20_fast_wait_loop ++ ++ # A20 is still not responding. Try frobbing it again. ++ # ++ decb (a20_tries) ++ jnz a20_try_loop ++ ++ movw $a20_err_msg, %si ++ call prtstr ++ ++a20_die: ++ hlt ++ jmp a20_die ++ ++a20_tries: ++ .byte A20_ENABLE_LOOPS ++ ++a20_err_msg: ++ .ascii "linux: fatal error: A20 gate not responding!" ++ .byte 13, 10, 0 ++ ++ # If we get here, all is good ++a20_done: ++ ++#endif /* CONFIG_X86_VOYAGER */ ++# set up gdt and idt and 32bit start address ++ lidt idt_48 # load idt with 0,0 ++ xorl %eax, %eax # Compute gdt_base ++ movw %ds, %ax # (Convert %ds:gdt to a linear ptr) ++ shll $4, %eax ++ addl %eax, code32 ++ addl $gdt, %eax ++ movl %eax, (gdt_48+2) ++ lgdt gdt_48 # load gdt with whatever is ++ # appropriate ++ ++# make sure any possible coprocessor is properly reset.. ++ xorw %ax, %ax ++ outb %al, $0xf0 ++ call delay ++ ++ outb %al, $0xf1 ++ call delay ++ ++# well, that went ok, I hope. Now we mask all interrupts - the rest ++# is done in init_IRQ(). ++ movb $0xFF, %al # mask all interrupts for now ++ outb %al, $0xA1 ++ call delay ++ ++ movb $0xFB, %al # mask all irq's but irq2 which ++ outb %al, $0x21 # is cascaded ++ ++# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't ++# need no steenking BIOS anyway (except for the initial loading :-). ++# The BIOS-routine wants lots of unnecessary data, and it's less ++# "interesting" anyway. This is how REAL programmers do it. ++# ++# Well, now's the time to actually move into protected mode. To make ++# things as simple as possible, we do no register set-up or anything, ++# we let the gnu-compiled 32-bit programs do that. We just jump to ++# absolute address 0x1000 (or the loader supplied one), ++# in 32-bit protected mode. ++# ++# Note that the short jump isn't strictly needed, although there are ++# reasons why it might be a good idea. It won't hurt in any case. ++ movw $1, %ax # protected mode (PE) bit ++ lmsw %ax # This is it! ++ jmp flush_instr ++ ++flush_instr: ++ xorw %bx, %bx # Flag to indicate a boot ++ xorl %esi, %esi # Pointer to real-mode code ++ movw %cs, %si ++ subw $DELTA_INITSEG, %si ++ shll $4, %esi # Convert to 32-bit pointer ++ ++# jump to startup_32 in arch/i386/boot/compressed/head.S ++# ++# NOTE: For high loaded big kernels we need a ++# jmpi 0x100000,__BOOT_CS ++# ++# but we yet haven't reloaded the CS register, so the default size ++# of the target offset still is 16 bit. ++# However, using an operand prefix (0x66), the CPU will properly ++# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference ++# Manual, Mixing 16-bit and 32-bit code, page 16-6) ++ ++ .byte 0x66, 0xea # prefix + jmpi-opcode ++code32: .long startup_32 # will be set to %cs+startup_32 ++ .word __BOOT_CS ++.code32 ++startup_32: ++ movl $(__BOOT_DS), %eax ++ movl %eax, %ds ++ movl %eax, %es ++ movl %eax, %fs ++ movl %eax, %gs ++ movl %eax, %ss ++ ++ xorl %eax, %eax ++1: incl %eax # check that A20 really IS enabled ++ movl %eax, 0x00000000 # loop forever if it isn't ++ cmpl %eax, 0x00100000 ++ je 1b ++ ++ # Jump to the 32bit entry point ++ jmpl *(code32_start - start + (DELTA_INITSEG << 4))(%esi) ++.code16 ++ ++# Here's a bunch of information about your current kernel.. ++kernel_version: .ascii UTS_RELEASE ++ .ascii " (" ++ .ascii LINUX_COMPILE_BY ++ .ascii "@" ++ .ascii LINUX_COMPILE_HOST ++ .ascii ") " ++ .ascii UTS_VERSION ++ .byte 0 ++ ++# This is the default real mode switch routine. ++# to be called just before protected mode transition ++default_switch: ++ cli # no interrupts allowed ! ++ movb $0x80, %al # disable NMI for bootup ++ # sequence ++ outb %al, $0x70 ++ lret ++ ++ ++#ifndef CONFIG_X86_VOYAGER ++# This routine tests whether or not A20 is enabled. If so, it ++# exits with zf = 0. ++# ++# The memory address used, 0x200, is the int $0x80 vector, which ++# should be safe. ++ ++A20_TEST_ADDR = 4*0x80 ++ ++a20_test: ++ pushw %cx ++ pushw %ax ++ xorw %cx, %cx ++ movw %cx, %fs # Low memory ++ decw %cx ++ movw %cx, %gs # High memory area ++ movw $A20_TEST_LOOPS, %cx ++ movw %fs:(A20_TEST_ADDR), %ax ++ pushw %ax ++a20_test_wait: ++ incw %ax ++ movw %ax, %fs:(A20_TEST_ADDR) ++ call delay # Serialize and make delay constant ++ cmpw %gs:(A20_TEST_ADDR+0x10), %ax ++ loope a20_test_wait ++ ++ popw %fs:(A20_TEST_ADDR) ++ popw %ax ++ popw %cx ++ ret ++ ++#endif /* CONFIG_X86_VOYAGER */ ++ ++# This routine checks that the keyboard command queue is empty ++# (after emptying the output buffers) ++# ++# Some machines have delusions that the keyboard buffer is always full ++# with no keyboard attached... ++# ++# If there is no keyboard controller, we will usually get 0xff ++# to all the reads. With each IO taking a microsecond and ++# a timeout of 100,000 iterations, this can take about half a ++# second ("delay" == outb to port 0x80). That should be ok, ++# and should also be plenty of time for a real keyboard controller ++# to empty. ++# ++ ++empty_8042: ++ pushl %ecx ++ movl $100000, %ecx ++ ++empty_8042_loop: ++ decl %ecx ++ jz empty_8042_end_loop ++ ++ call delay ++ ++ inb $0x64, %al # 8042 status port ++ testb $1, %al # output buffer? ++ jz no_output ++ ++ call delay ++ inb $0x60, %al # read it ++ jmp empty_8042_loop ++ ++no_output: ++ testb $2, %al # is input buffer full? ++ jnz empty_8042_loop # yes - loop ++empty_8042_end_loop: ++ popl %ecx ++ ret ++ ++# Read the cmos clock. Return the seconds in al ++gettime: ++ pushw %cx ++ movb $0x02, %ah ++ int $0x1a ++ movb %dh, %al # %dh contains the seconds ++ andb $0x0f, %al ++ movb %dh, %ah ++ movb $0x04, %cl ++ shrb %cl, %ah ++ aad ++ popw %cx ++ ret ++ ++# Delay is needed after doing I/O ++delay: ++ outb %al,$0x80 ++ ret ++ ++# Descriptor tables ++# ++# NOTE: The intel manual says gdt should be sixteen bytes aligned for ++# efficiency reasons. However, there are machines which are known not ++# to boot with misaligned GDTs, so alter this at your peril! If you alter ++# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two ++# empty GDT entries (one for NULL and one reserved). ++# ++# NOTE: On some CPUs, the GDT must be 8 byte aligned. This is ++# true for the Voyager Quad CPU card which will not boot without ++# This directive. 16 byte aligment is recommended by intel. ++# ++ .align 16 ++gdt: ++ .fill GDT_ENTRY_BOOT_CS,8,0 ++ ++ .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) ++ .word 0 # base address = 0 ++ .word 0x9A00 # code read/exec ++ .word 0x00CF # granularity = 4096, 386 ++ # (+5th nibble of limit) ++ ++ .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) ++ .word 0 # base address = 0 ++ .word 0x9200 # data read/write ++ .word 0x00CF # granularity = 4096, 386 ++ # (+5th nibble of limit) ++gdt_end: ++ .align 4 ++ ++ .word 0 # alignment byte ++idt_48: ++ .word 0 # idt limit = 0 ++ .word 0, 0 # idt base = 0L ++ ++ .word 0 # alignment byte ++gdt_48: ++ .word gdt_end - gdt - 1 # gdt limit ++ .word 0, 0 # gdt base (filled in later) ++ ++#ifndef CONFIG_VGA_NOPROBE ++# Include video setup & detection code ++ ++#include "video.S" ++#endif ++ ++# Setup signature -- must be last ++setup_sig1: .word SIG1 ++setup_sig2: .word SIG2 ++ ++# After this point, there is some free space which is used by the video mode ++# handling code to store the temporary mode table (not used by the kernel). ++ ++modelist: ++ ++.text ++endtext: ++.data ++enddata: ++.bss ++endbss: +diff --git a/arch/i386/configs/olpc_defconfig b/arch/i386/configs/olpc_defconfig +new file mode 100644 +index 0000000..f1675e8 +--- /dev/null ++++ b/arch/i386/configs/olpc_defconfig +@@ -0,0 +1,2183 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.22-rc5 ++# Wed Jun 20 08:26:53 2007 ++# ++CONFIG_X86_32=y ++CONFIG_GENERIC_TIME=y ++CONFIG_CLOCKSOURCE_WATCHDOG=y ++CONFIG_GENERIC_CLOCKEVENTS=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_SEMAPHORE_SLEEPERS=y ++CONFIG_X86=y ++CONFIG_MMU=y ++CONFIG_ZONE_DMA=y ++CONFIG_QUICKLIST=y ++CONFIG_GENERIC_ISA_DMA=y ++CONFIG_GENERIC_IOMAP=y ++CONFIG_GENERIC_BUG=y ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_ARCH_MAY_HAVE_PC_FDC=y ++CONFIG_DMI=y ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# Code maturity level options ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_LOCK_KERNEL=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++ ++# ++# General setup ++# ++CONFIG_LOCALVERSION="" ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++# CONFIG_IPC_NS is not set ++CONFIG_SYSVIPC_SYSCTL=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_BSD_PROCESS_ACCT=y ++# CONFIG_BSD_PROCESS_ACCT_V3 is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_UTS_NS is not set ++CONFIG_AUDIT=y ++CONFIG_AUDITSYSCALL=y ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_SYSFS_DEPRECATED is not set ++CONFIG_RELAY=y ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++CONFIG_EMBEDDED=y ++CONFIG_UID16=y ++# CONFIG_SYSCTL_SYSCALL is not set ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++CONFIG_KALLSYMS_EXTRA_PASS=y ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++# CONFIG_BASE_FULL is not set ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLAB=y ++# CONFIG_SLUB is not set ++# CONFIG_SLOB is not set ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=1 ++ ++# ++# Loadable module support ++# ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++CONFIG_KMOD=y ++ ++# ++# Block layer ++# ++CONFIG_BLOCK=y ++# CONFIG_LBD is not set ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++# CONFIG_IOSCHED_AS is not set ++# CONFIG_IOSCHED_DEADLINE is not set ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++ ++# ++# Processor type and features ++# ++CONFIG_TICK_ONESHOT=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++# CONFIG_SMP is not set ++CONFIG_X86_PC=y ++# CONFIG_X86_ELAN is not set ++# CONFIG_X86_VOYAGER is not set ++# CONFIG_X86_NUMAQ is not set ++# CONFIG_X86_SUMMIT is not set ++# CONFIG_X86_BIGSMP is not set ++# CONFIG_X86_VISWS is not set ++# CONFIG_X86_GENERICARCH is not set ++# CONFIG_X86_ES7000 is not set ++# CONFIG_PARAVIRT is not set ++# CONFIG_M386 is not set ++# CONFIG_M486 is not set ++# CONFIG_M586 is not set ++# CONFIG_M586TSC is not set ++# CONFIG_M586MMX is not set ++# CONFIG_M686 is not set ++# CONFIG_MPENTIUMII is not set ++# CONFIG_MPENTIUMIII is not set ++# CONFIG_MPENTIUMM is not set ++# CONFIG_MCORE2 is not set ++# CONFIG_MPENTIUM4 is not set ++# CONFIG_MK6 is not set ++# CONFIG_MK7 is not set ++# CONFIG_MK8 is not set ++# CONFIG_MCRUSOE is not set ++# CONFIG_MEFFICEON is not set ++# CONFIG_MWINCHIPC6 is not set ++# CONFIG_MWINCHIP2 is not set ++# CONFIG_MWINCHIP3D is not set ++# CONFIG_MGEODEGX1 is not set ++CONFIG_MGEODE_LX=y ++# CONFIG_MCYRIXIII is not set ++# CONFIG_MVIAC3_2 is not set ++# CONFIG_MVIAC7 is not set ++# CONFIG_X86_GENERIC is not set ++CONFIG_X86_CMPXCHG=y ++CONFIG_X86_L1_CACHE_SHIFT=5 ++CONFIG_X86_XADD=y ++CONFIG_RWSEM_XCHGADD_ALGORITHM=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_X86_WP_WORKS_OK=y ++CONFIG_X86_INVLPG=y ++CONFIG_X86_BSWAP=y ++CONFIG_X86_POPAD_OK=y ++CONFIG_X86_USE_PPRO_CHECKSUM=y ++CONFIG_X86_USE_3DNOW=y ++CONFIG_X86_TSC=y ++CONFIG_X86_MINIMUM_CPU_MODEL=4 ++# CONFIG_HPET_TIMER is not set ++# CONFIG_PREEMPT_NONE is not set ++# CONFIG_PREEMPT_VOLUNTARY is not set ++CONFIG_PREEMPT=y ++CONFIG_PREEMPT_BKL=y ++# CONFIG_X86_UP_APIC is not set ++# CONFIG_X86_MCE is not set ++# CONFIG_VM86 is not set ++# CONFIG_TOSHIBA is not set ++# CONFIG_I8K is not set ++CONFIG_X86_REBOOTFIXUPS=y ++# CONFIG_MICROCODE is not set ++CONFIG_X86_MSR=y ++CONFIG_X86_CPUID=m ++ ++# ++# Firmware Drivers ++# ++# CONFIG_EDD is not set ++# CONFIG_DELL_RBU is not set ++# CONFIG_DCDBAS is not set ++CONFIG_NOHIGHMEM=y ++# CONFIG_HIGHMEM4G is not set ++# CONFIG_HIGHMEM64G is not set ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_3G_OPT is not set ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_2G_OPT is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++CONFIG_ARCH_FLATMEM_ENABLE=y ++CONFIG_ARCH_SPARSEMEM_ENABLE=y ++CONFIG_ARCH_SELECT_MEMORY_MODEL=y ++CONFIG_ARCH_POPULATES_NODE_MAP=y ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_SPARSEMEM_STATIC=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 ++CONFIG_NR_QUICK=1 ++# CONFIG_MATH_EMULATION is not set ++# CONFIG_MTRR is not set ++# CONFIG_SECCOMP is not set ++# CONFIG_VGA_NOPROBE is not set ++CONFIG_HZ_100=y ++# CONFIG_HZ_250 is not set ++# CONFIG_HZ_300 is not set ++# CONFIG_HZ_1000 is not set ++CONFIG_HZ=100 ++CONFIG_KEXEC=y ++CONFIG_PHYSICAL_START=0x400000 ++# CONFIG_RELOCATABLE is not set ++CONFIG_PHYSICAL_ALIGN=0x100000 ++# CONFIG_COMPAT_VDSO is not set ++ ++# ++# Power management options (ACPI, APM) ++# ++CONFIG_PM=y ++CONFIG_PM_LEGACY=y ++CONFIG_PM_DEBUG=y ++CONFIG_DISABLE_SUSPEND_VT_SWITCH=y ++# CONFIG_PM_TRACE is not set ++# CONFIG_PM_SYSFS_DEPRECATED is not set ++CONFIG_SOFTWARE_SUSPEND=y ++CONFIG_PM_STD_PARTITION="" ++ ++# ++# ACPI (Advanced Configuration and Power Interface) Support ++# ++# CONFIG_ACPI is not set ++# CONFIG_APM is not set ++ ++# ++# CPU Frequency scaling ++# ++# CONFIG_CPU_FREQ is not set ++ ++# ++# Bus options (PCI, PCMCIA, EISA, MCA, ISA) ++# ++CONFIG_PCI=y ++# CONFIG_PCI_GOBIOS is not set ++# CONFIG_PCI_GOMMCONFIG is not set ++# CONFIG_PCI_GODIRECT is not set ++# CONFIG_PCI_GOANY is not set ++CONFIG_PCI_GOOLPC=y ++CONFIG_PCI_DIRECT=y ++CONFIG_PCI_OLPC=y ++# CONFIG_PCIEPORTBUS is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCI_DEBUG is not set ++CONFIG_ISA_DMA_API=y ++# CONFIG_ISA is not set ++# CONFIG_MCA is not set ++# CONFIG_SCx200 is not set ++CONFIG_GEODE_MFGPT_TIMER=y ++CONFIG_OLPC=y ++CONFIG_OLPC_PM=y ++CONFIG_OPEN_FIRMWARE=y ++ ++# ++# PCCARD (PCMCIA/CardBus) support ++# ++# CONFIG_PCCARD is not set ++# CONFIG_HOTPLUG_PCI is not set ++ ++# ++# Executable file formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++CONFIG_BINFMT_MISC=y ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_PACKET=y ++CONFIG_PACKET_MMAP=y ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++CONFIG_XFRM_USER=y ++# CONFIG_XFRM_SUB_POLICY is not set ++CONFIG_XFRM_MIGRATE=y ++CONFIG_NET_KEY=m ++CONFIG_NET_KEY_MIGRATE=y ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_ASK_IP_FIB_HASH=y ++# CONFIG_IP_FIB_TRIE is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_MULTIPLE_TABLES=y ++CONFIG_IP_ROUTE_MULTIPATH=y ++# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set ++CONFIG_IP_ROUTE_VERBOSE=y ++# CONFIG_IP_PNP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_IP_MROUTE is not set ++# CONFIG_ARPD is not set ++CONFIG_SYN_COOKIES=y ++CONFIG_INET_AH=m ++CONFIG_INET_ESP=m ++CONFIG_INET_IPCOMP=m ++CONFIG_INET_XFRM_TUNNEL=m ++CONFIG_INET_TUNNEL=m ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_DIAG is not set ++CONFIG_TCP_CONG_ADVANCED=y ++CONFIG_TCP_CONG_BIC=y ++CONFIG_TCP_CONG_CUBIC=m ++CONFIG_TCP_CONG_WESTWOOD=m ++CONFIG_TCP_CONG_HTCP=m ++CONFIG_TCP_CONG_HSTCP=m ++CONFIG_TCP_CONG_HYBLA=m ++CONFIG_TCP_CONG_VEGAS=m ++CONFIG_TCP_CONG_SCALABLE=m ++CONFIG_TCP_CONG_LP=m ++CONFIG_TCP_CONG_VENO=m ++CONFIG_TCP_CONG_YEAH=m ++CONFIG_TCP_CONG_ILLINOIS=m ++CONFIG_DEFAULT_BIC=y ++# CONFIG_DEFAULT_CUBIC is not set ++# CONFIG_DEFAULT_HTCP is not set ++# CONFIG_DEFAULT_VEGAS is not set ++# CONFIG_DEFAULT_WESTWOOD is not set ++# CONFIG_DEFAULT_RENO is not set ++CONFIG_DEFAULT_TCP_CONG="bic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IP_VS is not set ++CONFIG_IPV6=y ++CONFIG_IPV6_PRIVACY=y ++CONFIG_IPV6_ROUTER_PREF=y ++CONFIG_IPV6_ROUTE_INFO=y ++CONFIG_IPV6_OPTIMISTIC_DAD=y ++CONFIG_INET6_AH=m ++CONFIG_INET6_ESP=m ++CONFIG_INET6_IPCOMP=m ++CONFIG_IPV6_MIP6=y ++CONFIG_INET6_XFRM_TUNNEL=m ++CONFIG_INET6_TUNNEL=m ++CONFIG_INET6_XFRM_MODE_TRANSPORT=m ++CONFIG_INET6_XFRM_MODE_TUNNEL=m ++CONFIG_INET6_XFRM_MODE_BEET=m ++CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m ++CONFIG_IPV6_SIT=m ++CONFIG_IPV6_TUNNEL=m ++CONFIG_IPV6_MULTIPLE_TABLES=y ++CONFIG_IPV6_SUBTREES=y ++# CONFIG_NETLABEL is not set ++CONFIG_NETWORK_SECMARK=y ++CONFIG_NETFILTER=y ++# CONFIG_NETFILTER_DEBUG is not set ++ ++# ++# Core Netfilter Configuration ++# ++CONFIG_NETFILTER_NETLINK=m ++# CONFIG_NETFILTER_NETLINK_QUEUE is not set ++# CONFIG_NETFILTER_NETLINK_LOG is not set ++CONFIG_NF_CONNTRACK_ENABLED=m ++CONFIG_NF_CONNTRACK=m ++# CONFIG_NF_CT_ACCT is not set ++# CONFIG_NF_CONNTRACK_MARK is not set ++# CONFIG_NF_CONNTRACK_SECMARK is not set ++# CONFIG_NF_CONNTRACK_EVENTS is not set ++# CONFIG_NF_CT_PROTO_SCTP is not set ++# CONFIG_NF_CONNTRACK_AMANDA is not set ++CONFIG_NF_CONNTRACK_FTP=m ++# CONFIG_NF_CONNTRACK_H323 is not set ++CONFIG_NF_CONNTRACK_IRC=m ++# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set ++# CONFIG_NF_CONNTRACK_PPTP is not set ++# CONFIG_NF_CONNTRACK_SANE is not set ++# CONFIG_NF_CONNTRACK_SIP is not set ++# CONFIG_NF_CONNTRACK_TFTP is not set ++# CONFIG_NF_CT_NETLINK is not set ++CONFIG_NETFILTER_XTABLES=m ++# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set ++# CONFIG_NETFILTER_XT_TARGET_MARK is not set ++# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set ++CONFIG_NETFILTER_XT_TARGET_NFLOG=m ++# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set ++# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set ++# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set ++# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set ++# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set ++# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set ++# CONFIG_NETFILTER_XT_MATCH_DCCP is not set ++# CONFIG_NETFILTER_XT_MATCH_DSCP is not set ++# CONFIG_NETFILTER_XT_MATCH_ESP is not set ++# CONFIG_NETFILTER_XT_MATCH_HELPER is not set ++# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set ++# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set ++# CONFIG_NETFILTER_XT_MATCH_MAC is not set ++# CONFIG_NETFILTER_XT_MATCH_MARK is not set ++# CONFIG_NETFILTER_XT_MATCH_POLICY is not set ++# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set ++# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set ++# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set ++# CONFIG_NETFILTER_XT_MATCH_REALM is not set ++# CONFIG_NETFILTER_XT_MATCH_SCTP is not set ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set ++# CONFIG_NETFILTER_XT_MATCH_STRING is not set ++# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set ++# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set ++ ++# ++# IP: Netfilter Configuration ++# ++CONFIG_NF_CONNTRACK_IPV4=m ++CONFIG_NF_CONNTRACK_PROC_COMPAT=y ++# CONFIG_IP_NF_QUEUE is not set ++CONFIG_IP_NF_IPTABLES=m ++# CONFIG_IP_NF_MATCH_IPRANGE is not set ++# CONFIG_IP_NF_MATCH_TOS is not set ++# CONFIG_IP_NF_MATCH_RECENT is not set ++# CONFIG_IP_NF_MATCH_ECN is not set ++# CONFIG_IP_NF_MATCH_AH is not set ++# CONFIG_IP_NF_MATCH_TTL is not set ++# CONFIG_IP_NF_MATCH_OWNER is not set ++# CONFIG_IP_NF_MATCH_ADDRTYPE is not set ++CONFIG_IP_NF_FILTER=m ++# CONFIG_IP_NF_TARGET_REJECT is not set ++CONFIG_IP_NF_TARGET_LOG=m ++# CONFIG_IP_NF_TARGET_ULOG is not set ++CONFIG_NF_NAT=m ++CONFIG_NF_NAT_NEEDED=y ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++# CONFIG_IP_NF_TARGET_REDIRECT is not set ++# CONFIG_IP_NF_TARGET_NETMAP is not set ++# CONFIG_IP_NF_TARGET_SAME is not set ++# CONFIG_NF_NAT_SNMP_BASIC is not set ++CONFIG_NF_NAT_FTP=m ++CONFIG_NF_NAT_IRC=m ++# CONFIG_NF_NAT_TFTP is not set ++# CONFIG_NF_NAT_AMANDA is not set ++# CONFIG_NF_NAT_PPTP is not set ++# CONFIG_NF_NAT_H323 is not set ++# CONFIG_NF_NAT_SIP is not set ++# CONFIG_IP_NF_MANGLE is not set ++# CONFIG_IP_NF_RAW is not set ++# CONFIG_IP_NF_ARPTABLES is not set ++ ++# ++# IPv6: Netfilter Configuration (EXPERIMENTAL) ++# ++# CONFIG_NF_CONNTRACK_IPV6 is not set ++# CONFIG_IP6_NF_QUEUE is not set ++# CONFIG_IP6_NF_IPTABLES is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++ ++# ++# QoS and/or fair queueing ++# ++CONFIG_NET_SCHED=y ++CONFIG_NET_SCH_FIFO=y ++ ++# ++# Queueing/Scheduling ++# ++CONFIG_NET_SCH_CBQ=m ++CONFIG_NET_SCH_HTB=m ++CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_PRIO=m ++CONFIG_NET_SCH_RED=m ++CONFIG_NET_SCH_SFQ=m ++CONFIG_NET_SCH_TEQL=m ++CONFIG_NET_SCH_TBF=m ++CONFIG_NET_SCH_GRED=m ++CONFIG_NET_SCH_DSMARK=m ++CONFIG_NET_SCH_NETEM=m ++CONFIG_NET_SCH_INGRESS=m ++ ++# ++# Classification ++# ++CONFIG_NET_CLS=y ++CONFIG_NET_CLS_BASIC=m ++CONFIG_NET_CLS_TCINDEX=m ++CONFIG_NET_CLS_ROUTE4=m ++CONFIG_NET_CLS_ROUTE=y ++CONFIG_NET_CLS_FW=m ++CONFIG_NET_CLS_U32=m ++CONFIG_CLS_U32_PERF=y ++CONFIG_CLS_U32_MARK=y ++CONFIG_NET_CLS_RSVP=m ++CONFIG_NET_CLS_RSVP6=m ++CONFIG_NET_EMATCH=y ++CONFIG_NET_EMATCH_STACK=32 ++CONFIG_NET_EMATCH_CMP=m ++CONFIG_NET_EMATCH_NBYTE=m ++CONFIG_NET_EMATCH_U32=m ++CONFIG_NET_EMATCH_META=m ++CONFIG_NET_EMATCH_TEXT=m ++CONFIG_NET_CLS_ACT=y ++CONFIG_NET_ACT_POLICE=m ++CONFIG_NET_ACT_GACT=m ++CONFIG_GACT_PROB=y ++CONFIG_NET_ACT_MIRRED=m ++# CONFIG_NET_ACT_IPT is not set ++CONFIG_NET_ACT_PEDIT=m ++CONFIG_NET_ACT_SIMP=m ++CONFIG_NET_CLS_IND=y ++CONFIG_NET_ESTIMATOR=y ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_NET_TCPPROBE is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++CONFIG_FIB_RULES=y ++ ++# ++# Wireless ++# ++# CONFIG_CFG80211 is not set ++CONFIG_WIRELESS_EXT=y ++# CONFIG_MAC80211 is not set ++CONFIG_IEEE80211=m ++# CONFIG_IEEE80211_DEBUG is not set ++CONFIG_IEEE80211_CRYPT_WEP=m ++CONFIG_IEEE80211_CRYPT_CCMP=m ++CONFIG_IEEE80211_CRYPT_TKIP=m ++CONFIG_IEEE80211_SOFTMAC=m ++CONFIG_IEEE80211_SOFTMAC_DEBUG=y ++# CONFIG_RFKILL is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++ ++# ++# Connector - unified userspace <-> kernelspace linker ++# ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=m ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++# CONFIG_MTD_CMDLINE_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=m ++CONFIG_MTD_BLKDEVS=m ++CONFIG_MTD_BLOCK=m ++CONFIG_MTD_BLOCK_RO=m ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_TS5500 is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_PMC551 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++CONFIG_MTD_NAND_IDS=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++CONFIG_MTD_NAND_CAFE=y ++# CONFIG_MTD_NAND_CS553X is not set ++# CONFIG_MTD_NAND_NANDSIM is not set ++# CONFIG_MTD_NAND_PLATFORM is not set ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++ ++# ++# Parallel port support ++# ++# CONFIG_PARPORT is not set ++ ++# ++# Plug and Play support ++# ++# CONFIG_PNPACPI is not set ++ ++# ++# Block devices ++# ++# CONFIG_BLK_DEV_FD is not set ++# CONFIG_BLK_CPQ_DA is not set ++# CONFIG_BLK_CPQ_CISS_DA is not set ++# CONFIG_BLK_DEV_DAC960 is not set ++# CONFIG_BLK_DEV_UMEM is not set ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=m ++CONFIG_BLK_DEV_CRYPTOLOOP=m ++CONFIG_BLK_DEV_NBD=m ++# CONFIG_BLK_DEV_SX8 is not set ++CONFIG_BLK_DEV_UB=m ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=16384 ++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++ ++# ++# Misc devices ++# ++# CONFIG_IBM_ASM is not set ++# CONFIG_PHANTOM is not set ++# CONFIG_SGI_IOC4 is not set ++# CONFIG_TIFM_CORE is not set ++# CONFIG_EEPROM_93CX6 is not set ++CONFIG_IDE=m ++CONFIG_IDE_MAX_HWIFS=4 ++CONFIG_BLK_DEV_IDE=m ++ ++# ++# Please see Documentation/ide.txt for help/info on IDE drives ++# ++# CONFIG_BLK_DEV_IDE_SATA is not set ++# CONFIG_BLK_DEV_HD_IDE is not set ++CONFIG_BLK_DEV_IDEDISK=m ++CONFIG_IDEDISK_MULTI_MODE=y ++# CONFIG_BLK_DEV_IDECD is not set ++# CONFIG_BLK_DEV_IDETAPE is not set ++# CONFIG_BLK_DEV_IDEFLOPPY is not set ++# CONFIG_BLK_DEV_IDESCSI is not set ++CONFIG_IDE_TASK_IOCTL=y ++# CONFIG_IDE_PROC_FS is not set ++ ++# ++# IDE chipset support/bugfixes ++# ++CONFIG_IDE_GENERIC=m ++# CONFIG_BLK_DEV_CMD640 is not set ++CONFIG_BLK_DEV_IDEPCI=y ++CONFIG_IDEPCI_SHARE_IRQ=y ++# CONFIG_IDEPCI_PCIBUS_ORDER is not set ++# CONFIG_BLK_DEV_OFFBOARD is not set ++# CONFIG_BLK_DEV_GENERIC is not set ++# CONFIG_BLK_DEV_OPTI621 is not set ++# CONFIG_BLK_DEV_RZ1000 is not set ++CONFIG_BLK_DEV_IDEDMA_PCI=y ++# CONFIG_BLK_DEV_IDEDMA_FORCED is not set ++CONFIG_IDEDMA_ONLYDISK=y ++# CONFIG_BLK_DEV_AEC62XX is not set ++# CONFIG_BLK_DEV_ALI15X3 is not set ++# CONFIG_BLK_DEV_AMD74XX is not set ++# CONFIG_BLK_DEV_ATIIXP is not set ++# CONFIG_BLK_DEV_CMD64X is not set ++# CONFIG_BLK_DEV_TRIFLEX is not set ++# CONFIG_BLK_DEV_CY82C693 is not set ++# CONFIG_BLK_DEV_CS5520 is not set ++# CONFIG_BLK_DEV_CS5530 is not set ++# CONFIG_BLK_DEV_CS5535 is not set ++# CONFIG_BLK_DEV_HPT34X is not set ++# CONFIG_BLK_DEV_HPT366 is not set ++# CONFIG_BLK_DEV_JMICRON is not set ++# CONFIG_BLK_DEV_SC1200 is not set ++CONFIG_BLK_DEV_PIIX=m ++# CONFIG_BLK_DEV_IT8213 is not set ++# CONFIG_BLK_DEV_IT821X is not set ++# CONFIG_BLK_DEV_NS87415 is not set ++# CONFIG_BLK_DEV_PDC202XX_OLD is not set ++# CONFIG_BLK_DEV_PDC202XX_NEW is not set ++# CONFIG_BLK_DEV_SVWKS is not set ++# CONFIG_BLK_DEV_SIIMAGE is not set ++# CONFIG_BLK_DEV_SIS5513 is not set ++# CONFIG_BLK_DEV_SLC90E66 is not set ++# CONFIG_BLK_DEV_TRM290 is not set ++# CONFIG_BLK_DEV_VIA82CXXX is not set ++# CONFIG_BLK_DEV_TC86C001 is not set ++# CONFIG_IDE_ARM is not set ++CONFIG_BLK_DEV_IDEDMA=y ++# CONFIG_IDEDMA_IVB is not set ++# CONFIG_BLK_DEV_HD is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++CONFIG_BLK_DEV_SR=m ++CONFIG_BLK_DEV_SR_VENDOR=y ++CONFIG_CHR_DEV_SG=m ++CONFIG_CHR_DEV_SCH=m ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++CONFIG_SCSI_MULTI_LUN=y ++CONFIG_SCSI_CONSTANTS=y ++CONFIG_SCSI_LOGGING=y ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++ ++# ++# SCSI low-level drivers ++# ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set ++# CONFIG_SCSI_3W_9XXX is not set ++# CONFIG_SCSI_ACARD is not set ++# CONFIG_SCSI_AACRAID is not set ++# CONFIG_SCSI_AIC7XXX is not set ++# CONFIG_SCSI_AIC7XXX_OLD is not set ++# CONFIG_SCSI_AIC79XX is not set ++# CONFIG_SCSI_AIC94XX is not set ++# CONFIG_SCSI_DPT_I2O is not set ++# CONFIG_SCSI_ADVANSYS is not set ++# CONFIG_SCSI_ARCMSR is not set ++# CONFIG_MEGARAID_NEWGEN is not set ++# CONFIG_MEGARAID_LEGACY is not set ++# CONFIG_MEGARAID_SAS is not set ++# CONFIG_SCSI_HPTIOP is not set ++# CONFIG_SCSI_BUSLOGIC is not set ++# CONFIG_SCSI_DMX3191D is not set ++# CONFIG_SCSI_EATA is not set ++# CONFIG_SCSI_FUTURE_DOMAIN is not set ++# CONFIG_SCSI_GDTH is not set ++# CONFIG_SCSI_IPS is not set ++# CONFIG_SCSI_INITIO is not set ++# CONFIG_SCSI_INIA100 is not set ++# CONFIG_SCSI_STEX is not set ++# CONFIG_SCSI_SYM53C8XX_2 is not set ++# CONFIG_SCSI_QLOGIC_1280 is not set ++# CONFIG_SCSI_QLA_FC is not set ++# CONFIG_SCSI_QLA_ISCSI is not set ++# CONFIG_SCSI_LPFC is not set ++# CONFIG_SCSI_DC395x is not set ++# CONFIG_SCSI_DC390T is not set ++# CONFIG_SCSI_NSP32 is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_SRP is not set ++# CONFIG_ATA is not set ++ ++# ++# Multi-device support (RAID and LVM) ++# ++# CONFIG_MD is not set ++ ++# ++# Fusion MPT device support ++# ++# CONFIG_FUSION is not set ++# CONFIG_FUSION_SPI is not set ++# CONFIG_FUSION_FC is not set ++# CONFIG_FUSION_SAS is not set ++ ++# ++# IEEE 1394 (FireWire) support ++# ++# CONFIG_FIREWIRE is not set ++# CONFIG_IEEE1394 is not set ++ ++# ++# I2O device support ++# ++# CONFIG_I2O is not set ++# CONFIG_MACINTOSH_DRIVERS is not set ++ ++# ++# Network device support ++# ++CONFIG_NETDEVICES=y ++CONFIG_IFB=m ++CONFIG_DUMMY=m ++# CONFIG_BONDING is not set ++# CONFIG_EQUALIZER is not set ++CONFIG_TUN=m ++# CONFIG_ARCNET is not set ++# CONFIG_PHYLIB is not set ++ ++# ++# Ethernet (10 or 100Mbit) ++# ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=m ++# CONFIG_HAPPYMEAL is not set ++# CONFIG_SUNGEM is not set ++# CONFIG_CASSINI is not set ++# CONFIG_NET_VENDOR_3COM is not set ++ ++# ++# Tulip family network device support ++# ++# CONFIG_NET_TULIP is not set ++# CONFIG_HP100 is not set ++CONFIG_NET_PCI=y ++CONFIG_PCNET32=m ++# CONFIG_PCNET32_NAPI is not set ++# CONFIG_AMD8111_ETH is not set ++# CONFIG_ADAPTEC_STARFIRE is not set ++# CONFIG_B44 is not set ++# CONFIG_FORCEDETH is not set ++# CONFIG_DGRS is not set ++# CONFIG_EEPRO100 is not set ++# CONFIG_E100 is not set ++# CONFIG_FEALNX is not set ++# CONFIG_NATSEMI is not set ++CONFIG_NE2K_PCI=m ++CONFIG_8139CP=m ++# CONFIG_8139TOO is not set ++# CONFIG_SIS900 is not set ++# CONFIG_EPIC100 is not set ++# CONFIG_SUNDANCE is not set ++# CONFIG_TLAN is not set ++# CONFIG_VIA_RHINE is not set ++# CONFIG_SC92031 is not set ++CONFIG_NETDEV_1000=y ++# CONFIG_ACENIC is not set ++# CONFIG_DL2K is not set ++# CONFIG_E1000 is not set ++# CONFIG_NS83820 is not set ++# CONFIG_HAMACHI is not set ++# CONFIG_YELLOWFIN is not set ++# CONFIG_R8169 is not set ++# CONFIG_SIS190 is not set ++# CONFIG_SKGE is not set ++# CONFIG_SKY2 is not set ++# CONFIG_SK98LIN is not set ++# CONFIG_VIA_VELOCITY is not set ++# CONFIG_TIGON3 is not set ++# CONFIG_BNX2 is not set ++# CONFIG_QLA3XXX is not set ++# CONFIG_ATL1 is not set ++CONFIG_NETDEV_10000=y ++# CONFIG_CHELSIO_T1 is not set ++# CONFIG_CHELSIO_T3 is not set ++# CONFIG_IXGB is not set ++# CONFIG_S2IO is not set ++# CONFIG_MYRI10GE is not set ++# CONFIG_NETXEN_NIC is not set ++# CONFIG_MLX4_CORE is not set ++# CONFIG_TR is not set ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++CONFIG_WLAN_80211=y ++# CONFIG_IPW2100 is not set ++# CONFIG_IPW2200 is not set ++CONFIG_LIBERTAS=m ++CONFIG_LIBERTAS_USB=m ++CONFIG_LIBERTAS_DEBUG=y ++# CONFIG_AIRO is not set ++# CONFIG_HERMES is not set ++# CONFIG_ATMEL is not set ++# CONFIG_PRISM54 is not set ++# CONFIG_USB_ZD1201 is not set ++# CONFIG_PRISM54_USB is not set ++# CONFIG_HOSTAP is not set ++# CONFIG_BCM43XX is not set ++# CONFIG_ZD1211RW is not set ++# CONFIG_ADM8211 is not set ++# CONFIG_ACX_PCI is not set ++# CONFIG_ACX_USB is not set ++ ++# ++# USB Network Adapters ++# ++CONFIG_USB_CATC=m ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_USBNET_MII=m ++CONFIG_USB_USBNET=m ++CONFIG_USB_NET_AX8817X=m ++CONFIG_USB_NET_CDCETHER=m ++CONFIG_USB_NET_DM9601=m ++CONFIG_USB_NET_GL620A=m ++CONFIG_USB_NET_NET1080=m ++CONFIG_USB_NET_PLUSB=m ++CONFIG_USB_NET_MCS7830=m ++CONFIG_USB_NET_RNDIS_HOST=m ++CONFIG_USB_NET_CDC_SUBSET=m ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_BELKIN=y ++CONFIG_USB_ARMLINUX=y ++CONFIG_USB_EPSON2888=y ++# CONFIG_USB_KC2190 is not set ++CONFIG_USB_NET_ZAURUS=m ++# CONFIG_WAN is not set ++# CONFIG_FDDI is not set ++# CONFIG_HIPPI is not set ++CONFIG_PPP=m ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_PPP_DEFLATE=m ++# CONFIG_PPP_BSDCOMP is not set ++CONFIG_PPP_MPPE=m ++CONFIG_PPPOE=m ++CONFIG_SLIP=m ++CONFIG_SLIP_COMPRESSED=y ++CONFIG_SLHC=m ++CONFIG_SLIP_SMART=y ++# CONFIG_SLIP_MODE_SLIP6 is not set ++# CONFIG_NET_FC is not set ++# CONFIG_SHAPER is not set ++CONFIG_NETCONSOLE=m ++CONFIG_NETPOLL=y ++CONFIG_NETPOLL_TRAP=y ++CONFIG_NET_POLL_CONTROLLER=y ++ ++# ++# ISDN subsystem ++# ++# CONFIG_ISDN is not set ++ ++# ++# Telephony Support ++# ++# CONFIG_PHONE is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=m ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++CONFIG_INPUT_JOYDEV=m ++# CONFIG_INPUT_TSDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=m ++# CONFIG_MOUSE_PS2_ALPS is not set ++# CONFIG_MOUSE_PS2_LOGIPS2PP is not set ++# CONFIG_MOUSE_PS2_SYNAPTICS is not set ++# CONFIG_MOUSE_PS2_LIFEBOOK is not set ++# CONFIG_MOUSE_PS2_TRACKPOINT is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++CONFIG_MOUSE_PS2_OLPC=y ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++CONFIG_INPUT_MISC=y ++CONFIG_INPUT_PCSPKR=m ++# CONFIG_INPUT_WISTRON_BTNS is not set ++# CONFIG_INPUT_ATI_REMOTE is not set ++# CONFIG_INPUT_ATI_REMOTE2 is not set ++# CONFIG_INPUT_KEYSPAN_REMOTE is not set ++# CONFIG_INPUT_POWERMATE is not set ++# CONFIG_INPUT_YEALINK is not set ++CONFIG_INPUT_UINPUT=m ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_I8042=y ++CONFIG_SERIO_SERPORT=y ++# CONFIG_SERIO_CT82C710 is not set ++# CONFIG_SERIO_PCIPS2 is not set ++CONFIG_SERIO_LIBPS2=y ++CONFIG_SERIO_RAW=m ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++CONFIG_SERIAL_8250_CONSOLE=y ++CONFIG_SERIAL_8250_PCI=y ++CONFIG_SERIAL_8250_NR_UARTS=1 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=1 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_MANY_PORTS=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_DETECT_IRQ=y ++CONFIG_SERIAL_8250_RSA=y ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++# CONFIG_SERIAL_JSM is not set ++CONFIG_UNIX98_PTYS=y ++# CONFIG_LEGACY_PTYS is not set ++ ++# ++# IPMI ++# ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# ++# Watchdog Device Drivers ++# ++CONFIG_SOFT_WATCHDOG=m ++# CONFIG_ACQUIRE_WDT is not set ++# CONFIG_ADVANTECH_WDT is not set ++# CONFIG_ALIM1535_WDT is not set ++# CONFIG_ALIM7101_WDT is not set ++# CONFIG_SC520_WDT is not set ++# CONFIG_EUROTECH_WDT is not set ++# CONFIG_IB700_WDT is not set ++# CONFIG_IBMASR is not set ++# CONFIG_WAFER_WDT is not set ++# CONFIG_I6300ESB_WDT is not set ++# CONFIG_ITCO_WDT is not set ++# CONFIG_SC1200_WDT is not set ++# CONFIG_PC87413_WDT is not set ++# CONFIG_60XX_WDT is not set ++# CONFIG_SBC8360_WDT is not set ++# CONFIG_CPU5_WDT is not set ++# CONFIG_SMSC37B787_WDT is not set ++# CONFIG_W83627HF_WDT is not set ++# CONFIG_W83697HF_WDT is not set ++# CONFIG_W83877F_WDT is not set ++# CONFIG_W83977F_WDT is not set ++# CONFIG_MACHZ_WDT is not set ++# CONFIG_SBC_EPX_C3_WATCHDOG is not set ++ ++# ++# PCI-based Watchdog Cards ++# ++# CONFIG_PCIPCWATCHDOG is not set ++# CONFIG_WDTPCI is not set ++ ++# ++# USB-based Watchdog Cards ++# ++# CONFIG_USBPCWATCHDOG is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_HW_RANDOM_INTEL is not set ++# CONFIG_HW_RANDOM_AMD is not set ++CONFIG_HW_RANDOM_GEODE=y ++# CONFIG_HW_RANDOM_VIA is not set ++CONFIG_NVRAM=y ++# CONFIG_RTC is not set ++# CONFIG_GEN_RTC is not set ++# CONFIG_R3964 is not set ++# CONFIG_APPLICOM is not set ++# CONFIG_SONYPI is not set ++# CONFIG_AGP is not set ++# CONFIG_DRM is not set ++# CONFIG_MWAVE is not set ++# CONFIG_PC8736x_GPIO is not set ++# CONFIG_NSC_GPIO is not set ++CONFIG_CS5535_GPIO=m ++# CONFIG_RAW_DRIVER is not set ++CONFIG_HANGCHECK_TIMER=m ++ ++# ++# TPM devices ++# ++# CONFIG_TCG_TPM is not set ++# CONFIG_TELCLOCK is not set ++CONFIG_DEVPORT=y ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=m ++ ++# ++# I2C Algorithms ++# ++# CONFIG_I2C_ALGOBIT is not set ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++# CONFIG_I2C_ALI1535 is not set ++# CONFIG_I2C_ALI1563 is not set ++# CONFIG_I2C_ALI15X3 is not set ++# CONFIG_I2C_AMD756 is not set ++# CONFIG_I2C_AMD8111 is not set ++# CONFIG_I2C_I801 is not set ++# CONFIG_I2C_I810 is not set ++# CONFIG_I2C_PIIX4 is not set ++# CONFIG_I2C_NFORCE2 is not set ++# CONFIG_I2C_OCORES is not set ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_PROSAVAGE is not set ++# CONFIG_I2C_SAVAGE4 is not set ++# CONFIG_I2C_SIMTEC is not set ++CONFIG_SCx200_ACB=y ++# CONFIG_I2C_SIS5595 is not set ++# CONFIG_I2C_SIS630 is not set ++# CONFIG_I2C_SIS96X is not set ++# CONFIG_I2C_STUB is not set ++# CONFIG_I2C_TINY_USB is not set ++# CONFIG_I2C_VIA is not set ++# CONFIG_I2C_VIAPRO is not set ++# CONFIG_I2C_VOODOO3 is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_SENSORS_DS1337 is not set ++# CONFIG_SENSORS_DS1374 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++ ++# ++# SPI support ++# ++# CONFIG_SPI is not set ++# CONFIG_SPI_MASTER is not set ++ ++# ++# Dallas's 1-wire bus ++# ++# CONFIG_W1 is not set ++CONFIG_POWER_SUPPLY=y ++# CONFIG_POWER_SUPPLY_DEBUG is not set ++# CONFIG_PDA_POWER is not set ++# CONFIG_BATTERY_DS2760 is not set ++CONFIG_BATTERY_OLPC=y ++# CONFIG_HWMON is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set ++ ++# ++# Multimedia devices ++# ++CONFIG_VIDEO_DEV=y ++# CONFIG_VIDEO_V4L1 is not set ++CONFIG_VIDEO_V4L1_COMPAT=y ++CONFIG_VIDEO_V4L2=y ++CONFIG_VIDEO_CAPTURE_DRIVERS=y ++# CONFIG_VIDEO_ADV_DEBUG is not set ++# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set ++ ++# ++# Encoders/decoders and other helper chips ++# ++ ++# ++# Audio decoders ++# ++# CONFIG_VIDEO_TDA9840 is not set ++# CONFIG_VIDEO_TEA6415C is not set ++# CONFIG_VIDEO_TEA6420 is not set ++# CONFIG_VIDEO_MSP3400 is not set ++# CONFIG_VIDEO_CS53L32A is not set ++# CONFIG_VIDEO_TLV320AIC23B is not set ++# CONFIG_VIDEO_WM8775 is not set ++# CONFIG_VIDEO_WM8739 is not set ++ ++# ++# Video decoders ++# ++CONFIG_VIDEO_OV7670=y ++# CONFIG_VIDEO_SAA711X is not set ++# CONFIG_VIDEO_TVP5150 is not set ++ ++# ++# Video and audio decoders ++# ++# CONFIG_VIDEO_CX25840 is not set ++ ++# ++# MPEG video encoders ++# ++# CONFIG_VIDEO_CX2341X is not set ++ ++# ++# Video encoders ++# ++# CONFIG_VIDEO_SAA7127 is not set ++ ++# ++# Video improvement chips ++# ++# CONFIG_VIDEO_UPD64031A is not set ++# CONFIG_VIDEO_UPD64083 is not set ++# CONFIG_VIDEO_VIVI is not set ++# CONFIG_VIDEO_SAA5246A is not set ++# CONFIG_VIDEO_SAA5249 is not set ++# CONFIG_VIDEO_SAA7134 is not set ++# CONFIG_VIDEO_HEXIUM_ORION is not set ++# CONFIG_VIDEO_HEXIUM_GEMINI is not set ++# CONFIG_VIDEO_CX88 is not set ++CONFIG_VIDEO_CAFE_CCIC=y ++CONFIG_V4L_USB_DRIVERS=y ++# CONFIG_VIDEO_PVRUSB2 is not set ++# CONFIG_VIDEO_USBVISION is not set ++# CONFIG_USB_SN9C102 is not set ++# CONFIG_USB_ZR364XX is not set ++CONFIG_RADIO_ADAPTERS=y ++# CONFIG_RADIO_GEMTEK_PCI is not set ++# CONFIG_RADIO_MAXIRADIO is not set ++# CONFIG_RADIO_MAESTRO is not set ++# CONFIG_USB_DSBR is not set ++# CONFIG_DVB_CORE is not set ++CONFIG_DAB=y ++# CONFIG_USB_DABUSB is not set ++ ++# ++# Graphics support ++# ++CONFIG_BACKLIGHT_LCD_SUPPORT=y ++CONFIG_BACKLIGHT_CLASS_DEVICE=y ++CONFIG_LCD_CLASS_DEVICE=y ++# CONFIG_BACKLIGHT_PROGEAR is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++CONFIG_VGASTATE=m ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_SYS_FOPS is not set ++CONFIG_FB_DEFERRED_IO=y ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++CONFIG_FB_MODE_HELPERS=y ++CONFIG_FB_TILEBLITTING=y ++ ++# ++# Frame buffer hardware drivers ++# ++# CONFIG_FB_CIRRUS is not set ++# CONFIG_FB_PM2 is not set ++# CONFIG_FB_CYBER2000 is not set ++# CONFIG_FB_ARC is not set ++# CONFIG_FB_ASILIANT is not set ++# CONFIG_FB_IMSTT is not set ++CONFIG_FB_VGA16=m ++CONFIG_FB_VESA=y ++# CONFIG_FB_HECUBA is not set ++# CONFIG_FB_HGA is not set ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_NVIDIA is not set ++# CONFIG_FB_RIVA is not set ++# CONFIG_FB_I810 is not set ++# CONFIG_FB_LE80578 is not set ++# CONFIG_FB_INTEL is not set ++# CONFIG_FB_MATROX is not set ++# CONFIG_FB_RADEON is not set ++# CONFIG_FB_ATY128 is not set ++# CONFIG_FB_ATY is not set ++# CONFIG_FB_S3 is not set ++# CONFIG_FB_SAVAGE is not set ++# CONFIG_FB_SIS is not set ++# CONFIG_FB_NEOMAGIC is not set ++# CONFIG_FB_KYRO is not set ++# CONFIG_FB_3DFX is not set ++# CONFIG_FB_VOODOO1 is not set ++# CONFIG_FB_VT8623 is not set ++# CONFIG_FB_CYBLA is not set ++# CONFIG_FB_TRIDENT is not set ++# CONFIG_FB_ARK is not set ++# CONFIG_FB_PM3 is not set ++CONFIG_FB_GEODE=y ++CONFIG_FB_GEODE_LX=y ++CONFIG_FB_GEODE_GX=y ++# CONFIG_FB_GEODE_GX1 is not set ++CONFIG_FB_OLPC_DCON=y ++# CONFIG_FB_VIRTUAL is not set ++ ++# ++# Console display driver support ++# ++CONFIG_VGA_CONSOLE=y ++CONFIG_VGACON_SOFT_SCROLLBACK=y ++CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 ++CONFIG_VIDEO_SELECT=y ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y ++CONFIG_FONTS=y ++# CONFIG_FONT_8x8 is not set ++CONFIG_FONT_8x16=y ++# CONFIG_FONT_6x11 is not set ++# CONFIG_FONT_7x14 is not set ++# CONFIG_FONT_PEARL_8x8 is not set ++# CONFIG_FONT_ACORN_8x8 is not set ++# CONFIG_FONT_MINI_4x6 is not set ++# CONFIG_FONT_SUN8x16 is not set ++CONFIG_FONT_SUN12x22=y ++# CONFIG_FONT_10x18 is not set ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++CONFIG_LOGO_LINUX_CLUT224=y ++ ++# ++# Sound ++# ++CONFIG_SOUND=y ++ ++# ++# Advanced Linux Sound Architecture ++# ++CONFIG_SND=y ++CONFIG_SND_TIMER=y ++CONFIG_SND_PCM=y ++CONFIG_SND_HWDEP=m ++CONFIG_SND_RAWMIDI=m ++CONFIG_SND_SEQUENCER=m ++CONFIG_SND_SEQ_DUMMY=m ++CONFIG_SND_OSSEMUL=y ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_PCM_OSS_PLUGINS=y ++CONFIG_SND_SEQUENCER_OSS=y ++CONFIG_SND_DYNAMIC_MINORS=y ++# CONFIG_SND_SUPPORT_OLD_API is not set ++CONFIG_SND_VERBOSE_PROCFS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++ ++# ++# Generic devices ++# ++CONFIG_SND_MPU401_UART=m ++CONFIG_SND_AC97_CODEC=y ++CONFIG_SND_DUMMY=m ++CONFIG_SND_VIRMIDI=m ++CONFIG_SND_MTPAV=m ++# CONFIG_SND_SERIAL_U16550 is not set ++CONFIG_SND_MPU401=m ++ ++# ++# PCI devices ++# ++# CONFIG_SND_AD1889 is not set ++# CONFIG_SND_ALS300 is not set ++# CONFIG_SND_ALS4000 is not set ++# CONFIG_SND_ALI5451 is not set ++# CONFIG_SND_ATIIXP is not set ++# CONFIG_SND_ATIIXP_MODEM is not set ++# CONFIG_SND_AU8810 is not set ++# CONFIG_SND_AU8820 is not set ++# CONFIG_SND_AU8830 is not set ++# CONFIG_SND_AZT3328 is not set ++# CONFIG_SND_BT87X is not set ++# CONFIG_SND_CA0106 is not set ++# CONFIG_SND_CMIPCI is not set ++# CONFIG_SND_CS4281 is not set ++# CONFIG_SND_CS46XX is not set ++CONFIG_SND_CS5535AUDIO=y ++# CONFIG_SND_DARLA20 is not set ++# CONFIG_SND_GINA20 is not set ++# CONFIG_SND_LAYLA20 is not set ++# CONFIG_SND_DARLA24 is not set ++# CONFIG_SND_GINA24 is not set ++# CONFIG_SND_LAYLA24 is not set ++# CONFIG_SND_MONA is not set ++# CONFIG_SND_MIA is not set ++# CONFIG_SND_ECHO3G is not set ++# CONFIG_SND_INDIGO is not set ++# CONFIG_SND_INDIGOIO is not set ++# CONFIG_SND_INDIGODJ is not set ++# CONFIG_SND_EMU10K1 is not set ++# CONFIG_SND_EMU10K1X is not set ++CONFIG_SND_ENS1370=m ++CONFIG_SND_ENS1371=m ++# CONFIG_SND_ES1938 is not set ++# CONFIG_SND_ES1968 is not set ++# CONFIG_SND_FM801 is not set ++# CONFIG_SND_HDA_INTEL is not set ++# CONFIG_SND_HDSP is not set ++# CONFIG_SND_HDSPM is not set ++# CONFIG_SND_ICE1712 is not set ++# CONFIG_SND_ICE1724 is not set ++CONFIG_SND_INTEL8X0=m ++# CONFIG_SND_INTEL8X0M is not set ++# CONFIG_SND_KORG1212 is not set ++# CONFIG_SND_MAESTRO3 is not set ++# CONFIG_SND_MIXART is not set ++# CONFIG_SND_NM256 is not set ++# CONFIG_SND_PCXHR is not set ++# CONFIG_SND_RIPTIDE is not set ++# CONFIG_SND_RME32 is not set ++# CONFIG_SND_RME96 is not set ++# CONFIG_SND_RME9652 is not set ++# CONFIG_SND_SONICVIBES is not set ++# CONFIG_SND_TRIDENT is not set ++# CONFIG_SND_VIA82XX is not set ++# CONFIG_SND_VIA82XX_MODEM is not set ++# CONFIG_SND_VX222 is not set ++# CONFIG_SND_YMFPCI is not set ++CONFIG_SND_AC97_POWER_SAVE=y ++ ++# ++# USB devices ++# ++CONFIG_SND_USB_AUDIO=m ++CONFIG_SND_USB_USX2Y=m ++# CONFIG_SND_USB_CAIAQ is not set ++ ++# ++# System on Chip audio support ++# ++# CONFIG_SND_SOC is not set ++ ++# ++# Open Sound System ++# ++# CONFIG_SOUND_PRIME is not set ++CONFIG_AC97_BUS=y ++ ++# ++# HID Devices ++# ++CONFIG_HID=y ++# CONFIG_HID_DEBUG is not set ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=y ++# CONFIG_USB_HIDINPUT_POWERBOOK is not set ++# CONFIG_HID_FF is not set ++CONFIG_USB_HIDDEV=y ++ ++# ++# USB support ++# ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++CONFIG_USB_ARCH_HAS_EHCI=y ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++# CONFIG_USB_DEVICE_CLASS is not set ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_SUSPEND is not set ++CONFIG_USB_PERSIST=y ++# CONFIG_USB_OTG is not set ++ ++# ++# USB Host Controller Drivers ++# ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_SPLIT_ISO=y ++CONFIG_USB_EHCI_ROOT_HUB_TT=y ++# CONFIG_USB_EHCI_TT_NEWSCHED is not set ++# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_UHCI_HCD is not set ++# CONFIG_USB_SL811_HCD is not set ++ ++# ++# USB Device Class drivers ++# ++CONFIG_USB_ACM=m ++CONFIG_USB_PRINTER=m ++ ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++ ++# ++# may also be needed; see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++CONFIG_USB_STORAGE_DATAFAB=y ++CONFIG_USB_STORAGE_FREECOM=y ++CONFIG_USB_STORAGE_DPCM=y ++CONFIG_USB_STORAGE_USBAT=y ++CONFIG_USB_STORAGE_SDDR09=y ++CONFIG_USB_STORAGE_SDDR55=y ++CONFIG_USB_STORAGE_JUMPSHOT=y ++CONFIG_USB_STORAGE_ALAUDA=y ++# CONFIG_USB_STORAGE_KARMA is not set ++CONFIG_USB_LIBUSUAL=y ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++CONFIG_USB_MON=y ++ ++# ++# USB port drivers ++# ++ ++# ++# USB Serial Converter support ++# ++CONFIG_USB_SERIAL=m ++CONFIG_USB_SERIAL_GENERIC=y ++# CONFIG_USB_SERIAL_AIRCABLE is not set ++# CONFIG_USB_SERIAL_AIRPRIME is not set ++# CONFIG_USB_SERIAL_ARK3116 is not set ++# CONFIG_USB_SERIAL_BELKIN is not set ++# CONFIG_USB_SERIAL_WHITEHEAT is not set ++# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set ++CONFIG_USB_SERIAL_CP2101=m ++# CONFIG_USB_SERIAL_CYPRESS_M8 is not set ++# CONFIG_USB_SERIAL_EMPEG is not set ++CONFIG_USB_SERIAL_FTDI_SIO=m ++# CONFIG_USB_SERIAL_FUNSOFT is not set ++# CONFIG_USB_SERIAL_VISOR is not set ++# CONFIG_USB_SERIAL_IPAQ is not set ++# CONFIG_USB_SERIAL_IR is not set ++# CONFIG_USB_SERIAL_EDGEPORT is not set ++# CONFIG_USB_SERIAL_EDGEPORT_TI is not set ++# CONFIG_USB_SERIAL_GARMIN is not set ++# CONFIG_USB_SERIAL_IPW is not set ++# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set ++# CONFIG_USB_SERIAL_KEYSPAN is not set ++# CONFIG_USB_SERIAL_KLSI is not set ++# CONFIG_USB_SERIAL_KOBIL_SCT is not set ++# CONFIG_USB_SERIAL_MCT_U232 is not set ++# CONFIG_USB_SERIAL_MOS7720 is not set ++# CONFIG_USB_SERIAL_MOS7840 is not set ++# CONFIG_USB_SERIAL_NAVMAN is not set ++CONFIG_USB_SERIAL_PL2303=m ++# CONFIG_USB_SERIAL_HP4X is not set ++# CONFIG_USB_SERIAL_SAFE is not set ++# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set ++# CONFIG_USB_SERIAL_TI is not set ++# CONFIG_USB_SERIAL_CYBERJACK is not set ++# CONFIG_USB_SERIAL_XIRCOM is not set ++# CONFIG_USB_SERIAL_OPTION is not set ++# CONFIG_USB_SERIAL_OMNINET is not set ++# CONFIG_USB_SERIAL_DEBUG is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_AUERSWALD is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_SISUSBVGA is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set ++ ++# ++# USB DSL modem support ++# ++ ++# ++# USB Gadget Support ++# ++# CONFIG_USB_GADGET is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++ ++# ++# MMC/SD Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++# CONFIG_MMC_WBSD is not set ++# CONFIG_MMC_TIFM_SD is not set ++ ++# ++# LED devices ++# ++CONFIG_NEW_LEDS=y ++CONFIG_LEDS_CLASS=y ++ ++# ++# LED drivers ++# ++ ++# ++# LED Triggers ++# ++CONFIG_LEDS_TRIGGERS=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++# CONFIG_LEDS_TRIGGER_IDE_DISK is not set ++CONFIG_LEDS_TRIGGER_HEARTBEAT=y ++ ++# ++# InfiniBand support ++# ++# CONFIG_INFINIBAND is not set ++ ++# ++# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) ++# ++# CONFIG_EDAC is not set ++ ++# ++# Real Time Clock ++# ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++# CONFIG_RTC_HCTOSYS is not set ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set ++ ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++ ++# ++# SPI RTC drivers ++# ++ ++# ++# Platform RTC drivers ++# ++CONFIG_RTC_DRV_CMOS=y ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++ ++# ++# DMA Engine support ++# ++# CONFIG_DMA_ENGINE is not set ++ ++# ++# DMA Clients ++# ++ ++# ++# DMA Devices ++# ++ ++# ++# Virtualization ++# ++# CONFIG_KVM is not set ++ ++# ++# Sysprof ++# ++CONFIG_SYSPROF=m ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++CONFIG_EXT2_FS_XATTR=y ++# CONFIG_EXT2_FS_POSIX_ACL is not set ++CONFIG_EXT2_FS_SECURITY=y ++CONFIG_EXT2_FS_XIP=y ++CONFIG_FS_XIP=y ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++# CONFIG_EXT3_FS_POSIX_ACL is not set ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4DEV_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_ROMFS_FS is not set ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++CONFIG_QUOTA=y ++# CONFIG_QFMT_V1 is not set ++CONFIG_QFMT_V2=y ++CONFIG_QUOTACTL=y ++CONFIG_DNOTIFY=y ++CONFIG_AUTOFS_FS=m ++CONFIG_AUTOFS4_FS=m ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_UDF_FS=m ++CONFIG_UDF_NLS=y ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=m ++CONFIG_MSDOS_FS=m ++CONFIG_VFAT_FS=m ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="ascii" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_KCORE=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++CONFIG_HUGETLBFS=y ++CONFIG_HUGETLB_PAGE=y ++CONFIG_PROMFS_FS=y ++CONFIG_RAMFS=y ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_ECRYPT_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++CONFIG_JFFS2_FS_WBUF_VERIFY=y ++CONFIG_JFFS2_SUMMARY=y ++CONFIG_JFFS2_FS_XATTR=y ++# CONFIG_JFFS2_FS_POSIX_ACL is not set ++CONFIG_JFFS2_FS_SECURITY=y ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++CONFIG_CRAMFS=m ++# CONFIG_VXFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Network File Systems ++# ++CONFIG_NFS_FS=m ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set ++CONFIG_NFS_V4=y ++CONFIG_NFS_DIRECTIO=y ++# CONFIG_NFSD is not set ++CONFIG_LOCKD=m ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=m ++CONFIG_SUNRPC_GSS=m ++# CONFIG_SUNRPC_BIND34 is not set ++CONFIG_RPCSEC_GSS_KRB5=m ++CONFIG_RPCSEC_GSS_SPKM3=m ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++# CONFIG_9P_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++# CONFIG_BSD_DISKLABEL is not set ++# CONFIG_MINIX_SUBPARTITION is not set ++# CONFIG_SOLARIS_X86_PARTITION is not set ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++ ++# ++# Native Language Support ++# ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="utf8" ++CONFIG_NLS_CODEPAGE_437=y ++CONFIG_NLS_CODEPAGE_737=m ++CONFIG_NLS_CODEPAGE_775=m ++CONFIG_NLS_CODEPAGE_850=m ++CONFIG_NLS_CODEPAGE_852=m ++CONFIG_NLS_CODEPAGE_855=m ++CONFIG_NLS_CODEPAGE_857=m ++CONFIG_NLS_CODEPAGE_860=m ++CONFIG_NLS_CODEPAGE_861=m ++CONFIG_NLS_CODEPAGE_862=m ++CONFIG_NLS_CODEPAGE_863=m ++CONFIG_NLS_CODEPAGE_864=m ++CONFIG_NLS_CODEPAGE_865=m ++CONFIG_NLS_CODEPAGE_866=m ++CONFIG_NLS_CODEPAGE_869=m ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++CONFIG_NLS_CODEPAGE_932=m ++CONFIG_NLS_CODEPAGE_949=m ++CONFIG_NLS_CODEPAGE_874=m ++CONFIG_NLS_ISO8859_8=m ++CONFIG_NLS_CODEPAGE_1250=m ++CONFIG_NLS_CODEPAGE_1251=m ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=m ++CONFIG_NLS_ISO8859_2=m ++CONFIG_NLS_ISO8859_3=m ++CONFIG_NLS_ISO8859_4=m ++CONFIG_NLS_ISO8859_5=m ++CONFIG_NLS_ISO8859_6=m ++CONFIG_NLS_ISO8859_7=m ++CONFIG_NLS_ISO8859_9=m ++CONFIG_NLS_ISO8859_13=m ++CONFIG_NLS_ISO8859_14=m ++CONFIG_NLS_ISO8859_15=m ++CONFIG_NLS_KOI8_R=m ++CONFIG_NLS_KOI8_U=m ++CONFIG_NLS_UTF8=m ++ ++# ++# Distributed Lock Manager ++# ++# CONFIG_DLM is not set ++ ++# ++# Instrumentation Support ++# ++CONFIG_PROFILING=y ++CONFIG_OPROFILE=m ++CONFIG_KPROBES=y ++ ++# ++# Kernel hacking ++# ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_PRINTK_TIME=y ++# CONFIG_ENABLE_MUST_CHECK is not set ++CONFIG_MAGIC_SYSRQ=y ++CONFIG_UNUSED_SYMBOLS=y ++CONFIG_DEBUG_FS=y ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++CONFIG_SCHEDSTATS=y ++CONFIG_TIMER_STATS=y ++# CONFIG_DEBUG_SLAB is not set ++CONFIG_DEBUG_PREEMPT=y ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++# CONFIG_DEBUG_BUGVERBOSE is not set ++CONFIG_DEBUG_INFO=y ++CONFIG_DEBUG_VM=y ++CONFIG_DEBUG_LIST=y ++# CONFIG_FRAME_POINTER is not set ++# CONFIG_FORCED_INLINING is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_LKDTM is not set ++# CONFIG_FAULT_INJECTION is not set ++CONFIG_EARLY_PRINTK=y ++CONFIG_DEBUG_STACKOVERFLOW=y ++CONFIG_DEBUG_STACK_USAGE=y ++ ++# ++# Page alloc debug is incompatible with Software Suspend on i386 ++# ++CONFIG_DEBUG_RODATA=y ++CONFIG_4KSTACKS=y ++CONFIG_DOUBLEFAULT=y ++ ++# ++# Security options ++# ++CONFIG_KEYS=y ++CONFIG_KEYS_DEBUG_PROC_KEYS=y ++CONFIG_SECURITY=y ++CONFIG_SECURITY_NETWORK=y ++CONFIG_SECURITY_NETWORK_XFRM=y ++CONFIG_SECURITY_CAPABILITIES=y ++# CONFIG_SECURITY_ROOTPLUG is not set ++CONFIG_SECURITY_SELINUX=y ++CONFIG_SECURITY_SELINUX_BOOTPARAM=y ++CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 ++# CONFIG_SECURITY_SELINUX_DISABLE is not set ++CONFIG_SECURITY_SELINUX_DEVELOP=y ++CONFIG_SECURITY_SELINUX_AVC_STATS=y ++CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 ++# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set ++# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set ++ ++# ++# Cryptographic options ++# ++CONFIG_CRYPTO=y ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_BLKCIPHER=y ++CONFIG_CRYPTO_HASH=y ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_HMAC=y ++CONFIG_CRYPTO_XCBC=m ++CONFIG_CRYPTO_NULL=m ++CONFIG_CRYPTO_MD4=m ++CONFIG_CRYPTO_MD5=y ++CONFIG_CRYPTO_SHA1=y ++CONFIG_CRYPTO_SHA256=m ++CONFIG_CRYPTO_SHA512=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_GF128MUL=m ++CONFIG_CRYPTO_ECB=m ++CONFIG_CRYPTO_CBC=m ++CONFIG_CRYPTO_PCBC=m ++CONFIG_CRYPTO_LRW=m ++# CONFIG_CRYPTO_CRYPTD is not set ++CONFIG_CRYPTO_DES=m ++CONFIG_CRYPTO_FCRYPT=m ++CONFIG_CRYPTO_BLOWFISH=m ++CONFIG_CRYPTO_TWOFISH=m ++CONFIG_CRYPTO_TWOFISH_COMMON=m ++# CONFIG_CRYPTO_TWOFISH_586 is not set ++CONFIG_CRYPTO_SERPENT=m ++CONFIG_CRYPTO_AES=m ++CONFIG_CRYPTO_AES_586=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_CAST6=m ++CONFIG_CRYPTO_TEA=m ++CONFIG_CRYPTO_ARC4=m ++CONFIG_CRYPTO_KHAZAD=m ++CONFIG_CRYPTO_ANUBIS=m ++CONFIG_CRYPTO_DEFLATE=m ++CONFIG_CRYPTO_MICHAEL_MIC=m ++CONFIG_CRYPTO_CRC32C=m ++CONFIG_CRYPTO_CAMELLIA=m ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Hardware crypto devices ++# ++# CONFIG_CRYPTO_DEV_PADLOCK is not set ++CONFIG_CRYPTO_DEV_GEODE=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=m ++CONFIG_CRC16=m ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++CONFIG_LIBCRC32C=m ++CONFIG_AUDIT_GENERIC=y ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_REED_SOLOMON=y ++CONFIG_REED_SOLOMON_DEC16=y ++CONFIG_TEXTSEARCH=y ++CONFIG_TEXTSEARCH_KMP=m ++CONFIG_TEXTSEARCH_BM=m ++CONFIG_TEXTSEARCH_FSM=m ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y ++CONFIG_HAS_DMA=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_X86_BIOS_REBOOT=y ++CONFIG_KTIME_SCALAR=y +diff --git a/arch/i386/configs/xs_defconfig b/arch/i386/configs/xs_defconfig +new file mode 100644 +index 0000000..b937de5 +--- /dev/null ++++ b/arch/i386/configs/xs_defconfig +@@ -0,0 +1,2221 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.22-rc5 ++# Wed Jun 20 08:26:53 2007 ++# ++CONFIG_X86_32=y ++CONFIG_GENERIC_TIME=y ++CONFIG_CLOCKSOURCE_WATCHDOG=y ++CONFIG_GENERIC_CLOCKEVENTS=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_SEMAPHORE_SLEEPERS=y ++CONFIG_X86=y ++CONFIG_MMU=y ++CONFIG_ZONE_DMA=y ++CONFIG_QUICKLIST=y ++CONFIG_GENERIC_ISA_DMA=y ++CONFIG_GENERIC_IOMAP=y ++CONFIG_GENERIC_BUG=y ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_ARCH_MAY_HAVE_PC_FDC=y ++CONFIG_DMI=y ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# Code maturity level options ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_LOCK_KERNEL=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++ ++# ++# General setup ++# ++CONFIG_LOCALVERSION="" ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++# CONFIG_IPC_NS is not set ++CONFIG_SYSVIPC_SYSCTL=y ++CONFIG_POSIX_MQUEUE=y ++CONFIG_BSD_PROCESS_ACCT=y ++# CONFIG_BSD_PROCESS_ACCT_V3 is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_UTS_NS is not set ++CONFIG_AUDIT=y ++CONFIG_AUDITSYSCALL=y ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=17 ++# CONFIG_SYSFS_DEPRECATED is not set ++CONFIG_RELAY=y ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++CONFIG_EMBEDDED=y ++CONFIG_UID16=y ++# CONFIG_SYSCTL_SYSCALL is not set ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++CONFIG_KALLSYMS_EXTRA_PASS=y ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++# CONFIG_BASE_FULL is not set ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLAB=y ++# CONFIG_SLUB is not set ++# CONFIG_SLOB is not set ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=1 ++ ++# ++# Loadable module support ++# ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++CONFIG_KMOD=y ++ ++# ++# Block layer ++# ++CONFIG_BLOCK=y ++# CONFIG_LBD is not set ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++# CONFIG_IOSCHED_AS is not set ++# CONFIG_IOSCHED_DEADLINE is not set ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++ ++# ++# Processor type and features ++# ++CONFIG_TICK_ONESHOT=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++# CONFIG_SMP is not set ++CONFIG_X86_PC=y ++# CONFIG_X86_ELAN is not set ++# CONFIG_X86_VOYAGER is not set ++# CONFIG_X86_NUMAQ is not set ++# CONFIG_X86_SUMMIT is not set ++# CONFIG_X86_BIGSMP is not set ++# CONFIG_X86_VISWS is not set ++# CONFIG_X86_GENERICARCH is not set ++# CONFIG_X86_ES7000 is not set ++# CONFIG_PARAVIRT is not set ++# CONFIG_M386 is not set ++# CONFIG_M486 is not set ++# CONFIG_M586 is not set ++# CONFIG_M586TSC is not set ++# CONFIG_M586MMX is not set ++# CONFIG_M686 is not set ++# CONFIG_MPENTIUMII is not set ++# CONFIG_MPENTIUMIII is not set ++# CONFIG_MPENTIUMM is not set ++# CONFIG_MCORE2 is not set ++# CONFIG_MPENTIUM4 is not set ++# CONFIG_MK6 is not set ++# CONFIG_MK7 is not set ++# CONFIG_MK8 is not set ++# CONFIG_MCRUSOE is not set ++# CONFIG_MEFFICEON is not set ++# CONFIG_MWINCHIPC6 is not set ++# CONFIG_MWINCHIP2 is not set ++# CONFIG_MWINCHIP3D is not set ++# CONFIG_MGEODEGX1 is not set ++CONFIG_MGEODE_LX=y ++# CONFIG_MCYRIXIII is not set ++# CONFIG_MVIAC3_2 is not set ++# CONFIG_MVIAC7 is not set ++# CONFIG_X86_GENERIC is not set ++CONFIG_X86_CMPXCHG=y ++CONFIG_X86_L1_CACHE_SHIFT=5 ++CONFIG_X86_XADD=y ++CONFIG_RWSEM_XCHGADD_ALGORITHM=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_X86_WP_WORKS_OK=y ++CONFIG_X86_INVLPG=y ++CONFIG_X86_BSWAP=y ++CONFIG_X86_POPAD_OK=y ++CONFIG_X86_CMPXCHG64=y ++CONFIG_X86_USE_PPRO_CHECKSUM=y ++CONFIG_X86_USE_3DNOW=y ++CONFIG_X86_TSC=y ++CONFIG_X86_MINIMUM_CPU_MODEL=4 ++# CONFIG_HPET_TIMER is not set ++# CONFIG_PREEMPT_NONE is not set ++# CONFIG_PREEMPT_VOLUNTARY is not set ++CONFIG_PREEMPT=y ++CONFIG_PREEMPT_BKL=y ++# CONFIG_X86_UP_APIC is not set ++# CONFIG_X86_MCE is not set ++# CONFIG_VM86 is not set ++# CONFIG_TOSHIBA is not set ++# CONFIG_I8K is not set ++CONFIG_X86_REBOOTFIXUPS=y ++# CONFIG_MICROCODE is not set ++CONFIG_X86_MSR=y ++CONFIG_X86_CPUID=m ++ ++# ++# Firmware Drivers ++# ++# CONFIG_EDD is not set ++# CONFIG_DELL_RBU is not set ++# CONFIG_DCDBAS is not set ++CONFIG_NOHIGHMEM=y ++# CONFIG_HIGHMEM4G is not set ++# CONFIG_HIGHMEM64G is not set ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_3G_OPT is not set ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_2G_OPT is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++CONFIG_ARCH_FLATMEM_ENABLE=y ++CONFIG_ARCH_SPARSEMEM_ENABLE=y ++CONFIG_ARCH_SELECT_MEMORY_MODEL=y ++CONFIG_ARCH_POPULATES_NODE_MAP=y ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_SPARSEMEM_STATIC=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 ++CONFIG_NR_QUICK=1 ++# CONFIG_MATH_EMULATION is not set ++# CONFIG_MTRR is not set ++# CONFIG_SECCOMP is not set ++# CONFIG_VGA_NOPROBE is not set ++CONFIG_HZ_100=y ++# CONFIG_HZ_250 is not set ++# CONFIG_HZ_300 is not set ++# CONFIG_HZ_1000 is not set ++CONFIG_HZ=100 ++CONFIG_KEXEC=y ++CONFIG_PHYSICAL_START=0x400000 ++# CONFIG_RELOCATABLE is not set ++CONFIG_PHYSICAL_ALIGN=0x100000 ++# CONFIG_COMPAT_VDSO is not set ++ ++# ++# Power management options (ACPI, APM) ++# ++CONFIG_PM=y ++CONFIG_PM_LEGACY=y ++CONFIG_PM_DEBUG=y ++# CONFIG_DISABLE_CONSOLE_SUSPEND is not set ++CONFIG_DISABLE_SUSPEND_VT_SWITCH=y ++# CONFIG_PM_TRACE is not set ++# CONFIG_PM_SYSFS_DEPRECATED is not set ++CONFIG_SOFTWARE_SUSPEND=y ++CONFIG_PM_STD_PARTITION="" ++ ++# ++# ACPI (Advanced Configuration and Power Interface) Support ++# ++# CONFIG_ACPI is not set ++# CONFIG_APM is not set ++ ++# ++# CPU Frequency scaling ++# ++# CONFIG_CPU_FREQ is not set ++ ++# ++# Bus options (PCI, PCMCIA, EISA, MCA, ISA) ++# ++CONFIG_PCI=y ++# CONFIG_PCI_GOBIOS is not set ++# CONFIG_PCI_GOMMCONFIG is not set ++# CONFIG_PCI_GODIRECT is not set ++# CONFIG_PCI_GOANY is not set ++CONFIG_PCI_GOOLPC=y ++CONFIG_PCI_DIRECT=y ++CONFIG_PCI_OLPC=y ++# CONFIG_PCIEPORTBUS is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCI_DEBUG is not set ++CONFIG_ISA_DMA_API=y ++# CONFIG_ISA is not set ++# CONFIG_MCA is not set ++# CONFIG_SCx200 is not set ++CONFIG_GEODE_MFGPT_TIMER=y ++CONFIG_OLPC=y ++CONFIG_OLPC_PM=y ++CONFIG_OPEN_FIRMWARE=y ++ ++# ++# PCCARD (PCMCIA/CardBus) support ++# ++# CONFIG_PCCARD is not set ++# CONFIG_HOTPLUG_PCI is not set ++ ++# ++# Executable file formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++CONFIG_BINFMT_MISC=y ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_PACKET=y ++CONFIG_PACKET_MMAP=y ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++CONFIG_XFRM_USER=y ++# CONFIG_XFRM_SUB_POLICY is not set ++CONFIG_XFRM_MIGRATE=y ++CONFIG_NET_KEY=m ++CONFIG_NET_KEY_MIGRATE=y ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_ASK_IP_FIB_HASH=y ++# CONFIG_IP_FIB_TRIE is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_MULTIPLE_TABLES=y ++CONFIG_IP_ROUTE_MULTIPATH=y ++# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set ++CONFIG_IP_ROUTE_VERBOSE=y ++# CONFIG_IP_PNP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_IP_MROUTE is not set ++# CONFIG_ARPD is not set ++CONFIG_SYN_COOKIES=y ++CONFIG_INET_AH=m ++CONFIG_INET_ESP=m ++CONFIG_INET_IPCOMP=m ++CONFIG_INET_XFRM_TUNNEL=m ++CONFIG_INET_TUNNEL=m ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_DIAG is not set ++CONFIG_TCP_CONG_ADVANCED=y ++CONFIG_TCP_CONG_BIC=y ++CONFIG_TCP_CONG_CUBIC=m ++CONFIG_TCP_CONG_WESTWOOD=m ++CONFIG_TCP_CONG_HTCP=m ++CONFIG_TCP_CONG_HSTCP=m ++CONFIG_TCP_CONG_HYBLA=m ++CONFIG_TCP_CONG_VEGAS=m ++CONFIG_TCP_CONG_SCALABLE=m ++CONFIG_TCP_CONG_LP=m ++CONFIG_TCP_CONG_VENO=m ++CONFIG_TCP_CONG_YEAH=m ++CONFIG_TCP_CONG_ILLINOIS=m ++CONFIG_DEFAULT_BIC=y ++# CONFIG_DEFAULT_CUBIC is not set ++# CONFIG_DEFAULT_HTCP is not set ++# CONFIG_DEFAULT_VEGAS is not set ++# CONFIG_DEFAULT_WESTWOOD is not set ++# CONFIG_DEFAULT_RENO is not set ++CONFIG_DEFAULT_TCP_CONG="bic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IP_VS is not set ++CONFIG_IPV6=m ++CONFIG_IPV6_PRIVACY=y ++CONFIG_IPV6_ROUTER_PREF=y ++CONFIG_IPV6_ROUTE_INFO=y ++CONFIG_IPV6_OPTIMISTIC_DAD=y ++CONFIG_INET6_AH=m ++CONFIG_INET6_ESP=m ++CONFIG_INET6_IPCOMP=m ++CONFIG_IPV6_MIP6=y ++CONFIG_INET6_XFRM_TUNNEL=m ++CONFIG_INET6_TUNNEL=m ++CONFIG_INET6_XFRM_MODE_TRANSPORT=m ++CONFIG_INET6_XFRM_MODE_TUNNEL=m ++CONFIG_INET6_XFRM_MODE_BEET=m ++CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m ++CONFIG_IPV6_SIT=m ++CONFIG_IPV6_TUNNEL=m ++CONFIG_IPV6_MULTIPLE_TABLES=y ++CONFIG_IPV6_SUBTREES=y ++# CONFIG_NETLABEL is not set ++CONFIG_NETWORK_SECMARK=y ++CONFIG_NETFILTER=y ++# CONFIG_NETFILTER_DEBUG is not set ++ ++# ++# Core Netfilter Configuration ++# ++CONFIG_NETFILTER_NETLINK=m ++# CONFIG_NETFILTER_NETLINK_QUEUE is not set ++# CONFIG_NETFILTER_NETLINK_LOG is not set ++CONFIG_NF_CONNTRACK_ENABLED=m ++CONFIG_NF_CONNTRACK=m ++# CONFIG_NF_CT_ACCT is not set ++# CONFIG_NF_CONNTRACK_MARK is not set ++# CONFIG_NF_CONNTRACK_SECMARK is not set ++# CONFIG_NF_CONNTRACK_EVENTS is not set ++# CONFIG_NF_CT_PROTO_SCTP is not set ++# CONFIG_NF_CONNTRACK_AMANDA is not set ++CONFIG_NF_CONNTRACK_FTP=m ++# CONFIG_NF_CONNTRACK_H323 is not set ++CONFIG_NF_CONNTRACK_IRC=m ++# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set ++# CONFIG_NF_CONNTRACK_PPTP is not set ++# CONFIG_NF_CONNTRACK_SANE is not set ++# CONFIG_NF_CONNTRACK_SIP is not set ++# CONFIG_NF_CONNTRACK_TFTP is not set ++# CONFIG_NF_CT_NETLINK is not set ++CONFIG_NETFILTER_XTABLES=m ++# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set ++# CONFIG_NETFILTER_XT_TARGET_MARK is not set ++# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set ++CONFIG_NETFILTER_XT_TARGET_NFLOG=m ++# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set ++# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set ++# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set ++# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set ++# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set ++# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set ++# CONFIG_NETFILTER_XT_MATCH_DCCP is not set ++# CONFIG_NETFILTER_XT_MATCH_DSCP is not set ++# CONFIG_NETFILTER_XT_MATCH_ESP is not set ++# CONFIG_NETFILTER_XT_MATCH_HELPER is not set ++# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set ++# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set ++# CONFIG_NETFILTER_XT_MATCH_MAC is not set ++# CONFIG_NETFILTER_XT_MATCH_MARK is not set ++# CONFIG_NETFILTER_XT_MATCH_POLICY is not set ++# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set ++# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set ++# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set ++# CONFIG_NETFILTER_XT_MATCH_REALM is not set ++# CONFIG_NETFILTER_XT_MATCH_SCTP is not set ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set ++# CONFIG_NETFILTER_XT_MATCH_STRING is not set ++# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set ++# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set ++ ++# ++# IP: Netfilter Configuration ++# ++CONFIG_NF_CONNTRACK_IPV4=m ++CONFIG_NF_CONNTRACK_PROC_COMPAT=y ++# CONFIG_IP_NF_QUEUE is not set ++CONFIG_IP_NF_IPTABLES=m ++# CONFIG_IP_NF_MATCH_IPRANGE is not set ++# CONFIG_IP_NF_MATCH_TOS is not set ++# CONFIG_IP_NF_MATCH_RECENT is not set ++# CONFIG_IP_NF_MATCH_ECN is not set ++# CONFIG_IP_NF_MATCH_AH is not set ++# CONFIG_IP_NF_MATCH_TTL is not set ++# CONFIG_IP_NF_MATCH_OWNER is not set ++# CONFIG_IP_NF_MATCH_ADDRTYPE is not set ++CONFIG_IP_NF_FILTER=m ++# CONFIG_IP_NF_TARGET_REJECT is not set ++CONFIG_IP_NF_TARGET_LOG=m ++# CONFIG_IP_NF_TARGET_ULOG is not set ++CONFIG_NF_NAT=m ++CONFIG_NF_NAT_NEEDED=y ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++# CONFIG_IP_NF_TARGET_REDIRECT is not set ++# CONFIG_IP_NF_TARGET_NETMAP is not set ++# CONFIG_IP_NF_TARGET_SAME is not set ++# CONFIG_NF_NAT_SNMP_BASIC is not set ++CONFIG_NF_NAT_FTP=m ++CONFIG_NF_NAT_IRC=m ++# CONFIG_NF_NAT_TFTP is not set ++# CONFIG_NF_NAT_AMANDA is not set ++# CONFIG_NF_NAT_PPTP is not set ++# CONFIG_NF_NAT_H323 is not set ++# CONFIG_NF_NAT_SIP is not set ++# CONFIG_IP_NF_MANGLE is not set ++# CONFIG_IP_NF_RAW is not set ++# CONFIG_IP_NF_ARPTABLES is not set ++ ++# ++# IPv6: Netfilter Configuration (EXPERIMENTAL) ++# ++# CONFIG_NF_CONNTRACK_IPV6 is not set ++# CONFIG_IP6_NF_QUEUE is not set ++# CONFIG_IP6_NF_IPTABLES is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++ ++# ++# QoS and/or fair queueing ++# ++CONFIG_NET_SCHED=y ++CONFIG_NET_SCH_FIFO=y ++ ++# ++# Queueing/Scheduling ++# ++CONFIG_NET_SCH_CBQ=m ++CONFIG_NET_SCH_HTB=m ++CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_PRIO=m ++CONFIG_NET_SCH_RED=m ++CONFIG_NET_SCH_SFQ=m ++CONFIG_NET_SCH_TEQL=m ++CONFIG_NET_SCH_TBF=m ++CONFIG_NET_SCH_GRED=m ++CONFIG_NET_SCH_DSMARK=m ++CONFIG_NET_SCH_NETEM=m ++CONFIG_NET_SCH_INGRESS=m ++ ++# ++# Classification ++# ++CONFIG_NET_CLS=y ++CONFIG_NET_CLS_BASIC=m ++CONFIG_NET_CLS_TCINDEX=m ++CONFIG_NET_CLS_ROUTE4=m ++CONFIG_NET_CLS_ROUTE=y ++CONFIG_NET_CLS_FW=m ++CONFIG_NET_CLS_U32=m ++CONFIG_CLS_U32_PERF=y ++CONFIG_CLS_U32_MARK=y ++CONFIG_NET_CLS_RSVP=m ++CONFIG_NET_CLS_RSVP6=m ++CONFIG_NET_EMATCH=y ++CONFIG_NET_EMATCH_STACK=32 ++CONFIG_NET_EMATCH_CMP=m ++CONFIG_NET_EMATCH_NBYTE=m ++CONFIG_NET_EMATCH_U32=m ++CONFIG_NET_EMATCH_META=m ++CONFIG_NET_EMATCH_TEXT=m ++CONFIG_NET_CLS_ACT=y ++CONFIG_NET_ACT_POLICE=m ++CONFIG_NET_ACT_GACT=m ++CONFIG_GACT_PROB=y ++CONFIG_NET_ACT_MIRRED=m ++# CONFIG_NET_ACT_IPT is not set ++CONFIG_NET_ACT_PEDIT=m ++CONFIG_NET_ACT_SIMP=m ++CONFIG_NET_CLS_IND=y ++CONFIG_NET_ESTIMATOR=y ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_NET_TCPPROBE is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++CONFIG_FIB_RULES=y ++ ++# ++# Wireless ++# ++# CONFIG_CFG80211 is not set ++CONFIG_WIRELESS_EXT=y ++# CONFIG_MAC80211 is not set ++CONFIG_IEEE80211=m ++# CONFIG_IEEE80211_DEBUG is not set ++CONFIG_IEEE80211_CRYPT_WEP=m ++CONFIG_IEEE80211_CRYPT_CCMP=m ++CONFIG_IEEE80211_CRYPT_TKIP=m ++CONFIG_IEEE80211_SOFTMAC=m ++CONFIG_IEEE80211_SOFTMAC_DEBUG=y ++# CONFIG_RFKILL is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++ ++# ++# Connector - unified userspace <-> kernelspace linker ++# ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=m ++CONFIG_MTD_PARTITIONS=y ++CONFIG_MTD_REDBOOT_PARTS=m ++CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 ++# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set ++# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=m ++CONFIG_MTD_BLKDEVS=m ++CONFIG_MTD_BLOCK=m ++CONFIG_MTD_BLOCK_RO=m ++CONFIG_FTL=m ++CONFIG_NFTL=m ++CONFIG_NFTL_RW=y ++CONFIG_INFTL=m ++CONFIG_RFD_FTL=m ++# CONFIG_SSFDC is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++CONFIG_MTD_CFI=m ++CONFIG_MTD_JEDECPROBE=m ++CONFIG_MTD_GEN_PROBE=m ++# CONFIG_MTD_CFI_ADV_OPTIONS is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++CONFIG_MTD_CFI_INTELEXT=m ++CONFIG_MTD_CFI_AMDSTD=m ++CONFIG_MTD_CFI_STAA=m ++CONFIG_MTD_CFI_UTIL=m ++CONFIG_MTD_RAM=m ++CONFIG_MTD_ROM=m ++CONFIG_MTD_ABSENT=m ++ ++# ++# Mapping drivers for chip access ++# ++CONFIG_MTD_COMPLEX_MAPPINGS=y ++# CONFIG_MTD_PHYSMAP is not set ++# CONFIG_MTD_PNC2000 is not set ++CONFIG_MTD_SC520CDP=m ++CONFIG_MTD_NETSC520=m ++CONFIG_MTD_TS5500=m ++# CONFIG_MTD_SBC_GXX is not set ++# CONFIG_MTD_AMD76XROM is not set ++# CONFIG_MTD_ICHXROM is not set ++# CONFIG_MTD_ESB2ROM is not set ++# CONFIG_MTD_CK804XROM is not set ++CONFIG_MTD_SCB2_FLASH=m ++# CONFIG_MTD_NETtel is not set ++# CONFIG_MTD_DILNETPC is not set ++# CONFIG_MTD_L440GX is not set ++CONFIG_MTD_PCI=m ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++CONFIG_MTD_PMC551=m ++# CONFIG_MTD_PMC551_BUGFIX is not set ++# CONFIG_MTD_PMC551_DEBUG is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++CONFIG_MTD_MTDRAM=m ++CONFIG_MTDRAM_TOTAL_SIZE=4096 ++CONFIG_MTDRAM_ERASE_SIZE=128 ++CONFIG_MTD_BLOCK2MTD=m ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++CONFIG_MTD_NAND_IDS=y ++CONFIG_MTD_NAND_DISKONCHIP=m ++# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set ++CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 ++# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set ++CONFIG_MTD_NAND_CAFE=y ++CONFIG_MTD_NAND_CS553X=y ++CONFIG_MTD_NAND_NANDSIM=m ++# CONFIG_MTD_NAND_PLATFORM is not set ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++ ++# ++# Parallel port support ++# ++# CONFIG_PARPORT is not set ++ ++# ++# Plug and Play support ++# ++# CONFIG_PNPACPI is not set ++ ++# ++# Block devices ++# ++# CONFIG_BLK_DEV_FD is not set ++# CONFIG_BLK_CPQ_DA is not set ++# CONFIG_BLK_CPQ_CISS_DA is not set ++# CONFIG_BLK_DEV_DAC960 is not set ++# CONFIG_BLK_DEV_UMEM is not set ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=m ++CONFIG_BLK_DEV_CRYPTOLOOP=m ++CONFIG_BLK_DEV_NBD=m ++# CONFIG_BLK_DEV_SX8 is not set ++CONFIG_BLK_DEV_UB=m ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=16384 ++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++ ++# ++# Misc devices ++# ++# CONFIG_IBM_ASM is not set ++# CONFIG_PHANTOM is not set ++# CONFIG_SGI_IOC4 is not set ++# CONFIG_TIFM_CORE is not set ++# CONFIG_BLINK is not set ++# CONFIG_EEPROM_93CX6 is not set ++CONFIG_IDE=m ++CONFIG_IDE_MAX_HWIFS=4 ++CONFIG_BLK_DEV_IDE=m ++ ++# ++# Please see Documentation/ide.txt for help/info on IDE drives ++# ++# CONFIG_BLK_DEV_IDE_SATA is not set ++# CONFIG_BLK_DEV_HD_IDE is not set ++CONFIG_BLK_DEV_IDEDISK=m ++CONFIG_IDEDISK_MULTI_MODE=y ++# CONFIG_BLK_DEV_IDECD is not set ++# CONFIG_BLK_DEV_IDETAPE is not set ++# CONFIG_BLK_DEV_IDEFLOPPY is not set ++# CONFIG_BLK_DEV_IDESCSI is not set ++CONFIG_IDE_TASK_IOCTL=y ++# CONFIG_IDE_PROC_FS is not set ++ ++# ++# IDE chipset support/bugfixes ++# ++CONFIG_IDE_GENERIC=m ++# CONFIG_BLK_DEV_CMD640 is not set ++CONFIG_BLK_DEV_IDEPCI=y ++CONFIG_IDEPCI_SHARE_IRQ=y ++# CONFIG_IDEPCI_PCIBUS_ORDER is not set ++# CONFIG_BLK_DEV_OFFBOARD is not set ++# CONFIG_BLK_DEV_GENERIC is not set ++# CONFIG_BLK_DEV_OPTI621 is not set ++# CONFIG_BLK_DEV_RZ1000 is not set ++CONFIG_BLK_DEV_IDEDMA_PCI=y ++# CONFIG_BLK_DEV_IDEDMA_FORCED is not set ++CONFIG_IDEDMA_ONLYDISK=y ++# CONFIG_BLK_DEV_AEC62XX is not set ++# CONFIG_BLK_DEV_ALI15X3 is not set ++# CONFIG_BLK_DEV_AMD74XX is not set ++# CONFIG_BLK_DEV_ATIIXP is not set ++# CONFIG_BLK_DEV_CMD64X is not set ++# CONFIG_BLK_DEV_TRIFLEX is not set ++# CONFIG_BLK_DEV_CY82C693 is not set ++# CONFIG_BLK_DEV_CS5520 is not set ++# CONFIG_BLK_DEV_CS5530 is not set ++# CONFIG_BLK_DEV_CS5535 is not set ++# CONFIG_BLK_DEV_HPT34X is not set ++# CONFIG_BLK_DEV_HPT366 is not set ++# CONFIG_BLK_DEV_JMICRON is not set ++# CONFIG_BLK_DEV_SC1200 is not set ++CONFIG_BLK_DEV_PIIX=m ++# CONFIG_BLK_DEV_IT8213 is not set ++# CONFIG_BLK_DEV_IT821X is not set ++# CONFIG_BLK_DEV_NS87415 is not set ++# CONFIG_BLK_DEV_PDC202XX_OLD is not set ++# CONFIG_BLK_DEV_PDC202XX_NEW is not set ++# CONFIG_BLK_DEV_SVWKS is not set ++# CONFIG_BLK_DEV_SIIMAGE is not set ++# CONFIG_BLK_DEV_SIS5513 is not set ++# CONFIG_BLK_DEV_SLC90E66 is not set ++# CONFIG_BLK_DEV_TRM290 is not set ++# CONFIG_BLK_DEV_VIA82CXXX is not set ++# CONFIG_BLK_DEV_TC86C001 is not set ++# CONFIG_IDE_ARM is not set ++CONFIG_BLK_DEV_IDEDMA=y ++# CONFIG_IDEDMA_IVB is not set ++# CONFIG_BLK_DEV_HD is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++CONFIG_BLK_DEV_SR=m ++CONFIG_BLK_DEV_SR_VENDOR=y ++CONFIG_CHR_DEV_SG=m ++CONFIG_CHR_DEV_SCH=m ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++CONFIG_SCSI_MULTI_LUN=y ++CONFIG_SCSI_CONSTANTS=y ++CONFIG_SCSI_LOGGING=y ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++ ++# ++# SCSI low-level drivers ++# ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set ++# CONFIG_SCSI_3W_9XXX is not set ++# CONFIG_SCSI_ACARD is not set ++# CONFIG_SCSI_AACRAID is not set ++# CONFIG_SCSI_AIC7XXX is not set ++# CONFIG_SCSI_AIC7XXX_OLD is not set ++# CONFIG_SCSI_AIC79XX is not set ++# CONFIG_SCSI_AIC94XX is not set ++# CONFIG_SCSI_DPT_I2O is not set ++# CONFIG_SCSI_ADVANSYS is not set ++# CONFIG_SCSI_ARCMSR is not set ++# CONFIG_MEGARAID_NEWGEN is not set ++# CONFIG_MEGARAID_LEGACY is not set ++# CONFIG_MEGARAID_SAS is not set ++# CONFIG_SCSI_HPTIOP is not set ++# CONFIG_SCSI_BUSLOGIC is not set ++# CONFIG_SCSI_DMX3191D is not set ++# CONFIG_SCSI_EATA is not set ++# CONFIG_SCSI_FUTURE_DOMAIN is not set ++# CONFIG_SCSI_GDTH is not set ++# CONFIG_SCSI_IPS is not set ++# CONFIG_SCSI_INITIO is not set ++# CONFIG_SCSI_INIA100 is not set ++# CONFIG_SCSI_STEX is not set ++# CONFIG_SCSI_SYM53C8XX_2 is not set ++# CONFIG_SCSI_QLOGIC_1280 is not set ++# CONFIG_SCSI_QLA_FC is not set ++# CONFIG_SCSI_QLA_ISCSI is not set ++# CONFIG_SCSI_LPFC is not set ++# CONFIG_SCSI_DC395x is not set ++# CONFIG_SCSI_DC390T is not set ++# CONFIG_SCSI_NSP32 is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_SRP is not set ++# CONFIG_ATA is not set ++ ++# ++# Multi-device support (RAID and LVM) ++# ++# CONFIG_MD is not set ++ ++# ++# Fusion MPT device support ++# ++# CONFIG_FUSION is not set ++# CONFIG_FUSION_SPI is not set ++# CONFIG_FUSION_FC is not set ++# CONFIG_FUSION_SAS is not set ++ ++# ++# IEEE 1394 (FireWire) support ++# ++# CONFIG_FIREWIRE is not set ++# CONFIG_IEEE1394 is not set ++ ++# ++# I2O device support ++# ++# CONFIG_I2O is not set ++ ++# ++# Battery support ++# ++# CONFIG_BATTERY_CLASS is not set ++# CONFIG_MACINTOSH_DRIVERS is not set ++ ++# ++# Network device support ++# ++CONFIG_NETDEVICES=y ++CONFIG_IFB=m ++CONFIG_DUMMY=m ++# CONFIG_BONDING is not set ++# CONFIG_EQUALIZER is not set ++CONFIG_TUN=m ++# CONFIG_ARCNET is not set ++# CONFIG_PHYLIB is not set ++ ++# ++# Ethernet (10 or 100Mbit) ++# ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=m ++# CONFIG_HAPPYMEAL is not set ++# CONFIG_SUNGEM is not set ++# CONFIG_CASSINI is not set ++# CONFIG_NET_VENDOR_3COM is not set ++ ++# ++# Tulip family network device support ++# ++# CONFIG_NET_TULIP is not set ++# CONFIG_HP100 is not set ++CONFIG_NET_PCI=y ++# CONFIG_PCNET32 is not set ++# CONFIG_AMD8111_ETH is not set ++# CONFIG_ADAPTEC_STARFIRE is not set ++# CONFIG_B44 is not set ++# CONFIG_FORCEDETH is not set ++# CONFIG_DGRS is not set ++# CONFIG_EEPRO100 is not set ++# CONFIG_E100 is not set ++# CONFIG_FEALNX is not set ++# CONFIG_NATSEMI is not set ++CONFIG_NE2K_PCI=m ++# CONFIG_8139CP is not set ++# CONFIG_8139TOO is not set ++# CONFIG_SIS900 is not set ++# CONFIG_EPIC100 is not set ++# CONFIG_SUNDANCE is not set ++# CONFIG_TLAN is not set ++# CONFIG_VIA_RHINE is not set ++# CONFIG_SC92031 is not set ++CONFIG_NETDEV_1000=y ++# CONFIG_ACENIC is not set ++# CONFIG_DL2K is not set ++# CONFIG_E1000 is not set ++# CONFIG_NS83820 is not set ++# CONFIG_HAMACHI is not set ++# CONFIG_YELLOWFIN is not set ++# CONFIG_R8169 is not set ++# CONFIG_SIS190 is not set ++# CONFIG_SKGE is not set ++# CONFIG_SKY2 is not set ++# CONFIG_SK98LIN is not set ++# CONFIG_VIA_VELOCITY is not set ++# CONFIG_TIGON3 is not set ++# CONFIG_BNX2 is not set ++# CONFIG_QLA3XXX is not set ++# CONFIG_ATL1 is not set ++CONFIG_NETDEV_10000=y ++# CONFIG_CHELSIO_T1 is not set ++# CONFIG_CHELSIO_T3 is not set ++# CONFIG_IXGB is not set ++# CONFIG_S2IO is not set ++# CONFIG_MYRI10GE is not set ++# CONFIG_NETXEN_NIC is not set ++# CONFIG_MLX4_CORE is not set ++# CONFIG_TR is not set ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++CONFIG_WLAN_80211=y ++# CONFIG_IPW2100 is not set ++# CONFIG_IPW2200 is not set ++CONFIG_LIBERTAS=m ++CONFIG_LIBERTAS_USB=m ++CONFIG_LIBERTAS_DEBUG=y ++# CONFIG_AIRO is not set ++# CONFIG_HERMES is not set ++# CONFIG_ATMEL is not set ++# CONFIG_PRISM54 is not set ++# CONFIG_USB_ZD1201 is not set ++# CONFIG_PRISM54_USB is not set ++# CONFIG_HOSTAP is not set ++# CONFIG_BCM43XX is not set ++# CONFIG_ZD1211RW is not set ++# CONFIG_ADM8211 is not set ++# CONFIG_ACX_PCI is not set ++# CONFIG_ACX_USB is not set ++ ++# ++# USB Network Adapters ++# ++CONFIG_USB_CATC=m ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_USBNET_MII=m ++CONFIG_USB_USBNET=m ++CONFIG_USB_NET_AX8817X=m ++CONFIG_USB_NET_CDCETHER=m ++CONFIG_USB_NET_DM9601=m ++CONFIG_USB_NET_GL620A=m ++CONFIG_USB_NET_NET1080=m ++CONFIG_USB_NET_PLUSB=m ++CONFIG_USB_NET_MCS7830=m ++CONFIG_USB_NET_RNDIS_HOST=m ++CONFIG_USB_NET_CDC_SUBSET=m ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_BELKIN=y ++CONFIG_USB_ARMLINUX=y ++CONFIG_USB_EPSON2888=y ++# CONFIG_USB_KC2190 is not set ++CONFIG_USB_NET_ZAURUS=m ++# CONFIG_WAN is not set ++# CONFIG_FDDI is not set ++# CONFIG_HIPPI is not set ++CONFIG_PPP=m ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_PPP_DEFLATE=m ++# CONFIG_PPP_BSDCOMP is not set ++CONFIG_PPP_MPPE=m ++CONFIG_PPPOE=m ++CONFIG_SLIP=m ++CONFIG_SLIP_COMPRESSED=y ++CONFIG_SLHC=m ++CONFIG_SLIP_SMART=y ++# CONFIG_SLIP_MODE_SLIP6 is not set ++# CONFIG_NET_FC is not set ++# CONFIG_SHAPER is not set ++CONFIG_NETCONSOLE=m ++CONFIG_NETPOLL=y ++CONFIG_NETPOLL_TRAP=y ++CONFIG_NET_POLL_CONTROLLER=y ++ ++# ++# ISDN subsystem ++# ++# CONFIG_ISDN is not set ++ ++# ++# Telephony Support ++# ++# CONFIG_PHONE is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=m ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++CONFIG_INPUT_JOYDEV=m ++# CONFIG_INPUT_TSDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++CONFIG_KEYBOARD_ATKBD=y ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=m ++# CONFIG_MOUSE_PS2_ALPS is not set ++# CONFIG_MOUSE_PS2_LOGIPS2PP is not set ++# CONFIG_MOUSE_PS2_SYNAPTICS is not set ++# CONFIG_MOUSE_PS2_LIFEBOOK is not set ++# CONFIG_MOUSE_PS2_TRACKPOINT is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++CONFIG_MOUSE_PS2_OLPC=y ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++CONFIG_INPUT_MISC=y ++CONFIG_INPUT_PCSPKR=m ++# CONFIG_INPUT_WISTRON_BTNS is not set ++# CONFIG_INPUT_ATI_REMOTE is not set ++# CONFIG_INPUT_ATI_REMOTE2 is not set ++# CONFIG_INPUT_KEYSPAN_REMOTE is not set ++# CONFIG_INPUT_POWERMATE is not set ++# CONFIG_INPUT_YEALINK is not set ++CONFIG_INPUT_UINPUT=m ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_I8042=y ++CONFIG_SERIO_SERPORT=y ++# CONFIG_SERIO_CT82C710 is not set ++# CONFIG_SERIO_PCIPS2 is not set ++CONFIG_SERIO_LIBPS2=y ++CONFIG_SERIO_RAW=m ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++CONFIG_SERIAL_8250_CONSOLE=y ++CONFIG_SERIAL_8250_PCI=y ++CONFIG_SERIAL_8250_NR_UARTS=1 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=1 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_MANY_PORTS=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_DETECT_IRQ=y ++CONFIG_SERIAL_8250_RSA=y ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++# CONFIG_SERIAL_JSM is not set ++CONFIG_UNIX98_PTYS=y ++# CONFIG_LEGACY_PTYS is not set ++ ++# ++# IPMI ++# ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# ++# Watchdog Device Drivers ++# ++CONFIG_SOFT_WATCHDOG=m ++# CONFIG_ACQUIRE_WDT is not set ++# CONFIG_ADVANTECH_WDT is not set ++# CONFIG_ALIM1535_WDT is not set ++# CONFIG_ALIM7101_WDT is not set ++# CONFIG_SC520_WDT is not set ++# CONFIG_EUROTECH_WDT is not set ++# CONFIG_IB700_WDT is not set ++# CONFIG_IBMASR is not set ++# CONFIG_WAFER_WDT is not set ++# CONFIG_I6300ESB_WDT is not set ++# CONFIG_ITCO_WDT is not set ++# CONFIG_SC1200_WDT is not set ++# CONFIG_PC87413_WDT is not set ++# CONFIG_60XX_WDT is not set ++# CONFIG_SBC8360_WDT is not set ++# CONFIG_CPU5_WDT is not set ++# CONFIG_SMSC37B787_WDT is not set ++# CONFIG_W83627HF_WDT is not set ++# CONFIG_W83697HF_WDT is not set ++# CONFIG_W83877F_WDT is not set ++# CONFIG_W83977F_WDT is not set ++# CONFIG_MACHZ_WDT is not set ++# CONFIG_SBC_EPX_C3_WATCHDOG is not set ++ ++# ++# PCI-based Watchdog Cards ++# ++# CONFIG_PCIPCWATCHDOG is not set ++# CONFIG_WDTPCI is not set ++ ++# ++# USB-based Watchdog Cards ++# ++# CONFIG_USBPCWATCHDOG is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_HW_RANDOM_INTEL is not set ++# CONFIG_HW_RANDOM_AMD is not set ++CONFIG_HW_RANDOM_GEODE=y ++# CONFIG_HW_RANDOM_VIA is not set ++CONFIG_NVRAM=y ++# CONFIG_RTC is not set ++# CONFIG_GEN_RTC is not set ++# CONFIG_R3964 is not set ++# CONFIG_APPLICOM is not set ++# CONFIG_SONYPI is not set ++# CONFIG_AGP is not set ++# CONFIG_DRM is not set ++# CONFIG_MWAVE is not set ++# CONFIG_PC8736x_GPIO is not set ++# CONFIG_NSC_GPIO is not set ++CONFIG_CS5535_GPIO=m ++# CONFIG_RAW_DRIVER is not set ++CONFIG_HANGCHECK_TIMER=m ++ ++# ++# TPM devices ++# ++# CONFIG_TCG_TPM is not set ++# CONFIG_TELCLOCK is not set ++CONFIG_DEVPORT=y ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=m ++ ++# ++# I2C Algorithms ++# ++# CONFIG_I2C_ALGOBIT is not set ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++# CONFIG_I2C_ALI1535 is not set ++# CONFIG_I2C_ALI1563 is not set ++# CONFIG_I2C_ALI15X3 is not set ++# CONFIG_I2C_AMD756 is not set ++# CONFIG_I2C_AMD8111 is not set ++# CONFIG_I2C_I801 is not set ++# CONFIG_I2C_I810 is not set ++# CONFIG_I2C_PIIX4 is not set ++# CONFIG_I2C_NFORCE2 is not set ++# CONFIG_I2C_OCORES is not set ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_PROSAVAGE is not set ++# CONFIG_I2C_SAVAGE4 is not set ++# CONFIG_I2C_SIMTEC is not set ++CONFIG_SCx200_ACB=y ++# CONFIG_I2C_SIS5595 is not set ++# CONFIG_I2C_SIS630 is not set ++# CONFIG_I2C_SIS96X is not set ++# CONFIG_I2C_STUB is not set ++# CONFIG_I2C_TINY_USB is not set ++# CONFIG_I2C_VIA is not set ++# CONFIG_I2C_VIAPRO is not set ++# CONFIG_I2C_VOODOO3 is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_SENSORS_DS1337 is not set ++# CONFIG_SENSORS_DS1374 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++ ++# ++# SPI support ++# ++# CONFIG_SPI is not set ++# CONFIG_SPI_MASTER is not set ++ ++# ++# Dallas's 1-wire bus ++# ++# CONFIG_W1 is not set ++CONFIG_POWER_SUPPLY=m ++# CONFIG_POWER_SUPPLY_DEBUG is not set ++# CONFIG_PDA_POWER is not set ++# CONFIG_BATTERY_DS2760 is not set ++CONFIG_BATTERY_OLPC=m ++# CONFIG_HWMON is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set ++ ++# ++# Multimedia devices ++# ++CONFIG_VIDEO_DEV=m ++# CONFIG_VIDEO_V4L1 is not set ++CONFIG_VIDEO_V4L1_COMPAT=y ++CONFIG_VIDEO_V4L2=y ++CONFIG_VIDEO_CAPTURE_DRIVERS=y ++# CONFIG_VIDEO_ADV_DEBUG is not set ++# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set ++ ++# ++# Encoders/decoders and other helper chips ++# ++ ++# ++# Audio decoders ++# ++# CONFIG_VIDEO_TDA9840 is not set ++# CONFIG_VIDEO_TEA6415C is not set ++# CONFIG_VIDEO_TEA6420 is not set ++# CONFIG_VIDEO_MSP3400 is not set ++# CONFIG_VIDEO_CS53L32A is not set ++# CONFIG_VIDEO_TLV320AIC23B is not set ++# CONFIG_VIDEO_WM8775 is not set ++# CONFIG_VIDEO_WM8739 is not set ++ ++# ++# Video decoders ++# ++CONFIG_VIDEO_OV7670=m ++# CONFIG_VIDEO_SAA711X is not set ++# CONFIG_VIDEO_TVP5150 is not set ++ ++# ++# Video and audio decoders ++# ++# CONFIG_VIDEO_CX25840 is not set ++ ++# ++# MPEG video encoders ++# ++# CONFIG_VIDEO_CX2341X is not set ++ ++# ++# Video encoders ++# ++# CONFIG_VIDEO_SAA7127 is not set ++ ++# ++# Video improvement chips ++# ++# CONFIG_VIDEO_UPD64031A is not set ++# CONFIG_VIDEO_UPD64083 is not set ++# CONFIG_VIDEO_VIVI is not set ++# CONFIG_VIDEO_SAA5246A is not set ++# CONFIG_VIDEO_SAA5249 is not set ++# CONFIG_VIDEO_SAA7134 is not set ++# CONFIG_VIDEO_HEXIUM_ORION is not set ++# CONFIG_VIDEO_HEXIUM_GEMINI is not set ++# CONFIG_VIDEO_CX88 is not set ++CONFIG_VIDEO_CAFE_CCIC=m ++CONFIG_V4L_USB_DRIVERS=y ++# CONFIG_VIDEO_PVRUSB2 is not set ++# CONFIG_VIDEO_USBVISION is not set ++# CONFIG_USB_SN9C102 is not set ++# CONFIG_USB_ZR364XX is not set ++CONFIG_RADIO_ADAPTERS=y ++# CONFIG_RADIO_GEMTEK_PCI is not set ++# CONFIG_RADIO_MAXIRADIO is not set ++# CONFIG_RADIO_MAESTRO is not set ++# CONFIG_USB_DSBR is not set ++# CONFIG_DVB_CORE is not set ++CONFIG_DAB=y ++# CONFIG_USB_DABUSB is not set ++ ++# ++# Graphics support ++# ++CONFIG_BACKLIGHT_LCD_SUPPORT=y ++CONFIG_BACKLIGHT_CLASS_DEVICE=y ++CONFIG_LCD_CLASS_DEVICE=y ++# CONFIG_BACKLIGHT_PROGEAR is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++CONFIG_VGASTATE=m ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_SYS_FOPS is not set ++CONFIG_FB_DEFERRED_IO=y ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++CONFIG_FB_MODE_HELPERS=y ++CONFIG_FB_TILEBLITTING=y ++ ++# ++# Frame buffer hardware drivers ++# ++# CONFIG_FB_CIRRUS is not set ++# CONFIG_FB_PM2 is not set ++# CONFIG_FB_CYBER2000 is not set ++# CONFIG_FB_ARC is not set ++# CONFIG_FB_ASILIANT is not set ++# CONFIG_FB_IMSTT is not set ++CONFIG_FB_VGA16=m ++CONFIG_FB_VESA=y ++# CONFIG_FB_HECUBA is not set ++# CONFIG_FB_HGA is not set ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_NVIDIA is not set ++# CONFIG_FB_RIVA is not set ++# CONFIG_FB_I810 is not set ++# CONFIG_FB_LE80578 is not set ++# CONFIG_FB_INTEL is not set ++# CONFIG_FB_MATROX is not set ++# CONFIG_FB_RADEON is not set ++# CONFIG_FB_ATY128 is not set ++# CONFIG_FB_ATY is not set ++# CONFIG_FB_S3 is not set ++# CONFIG_FB_SAVAGE is not set ++# CONFIG_FB_SIS is not set ++# CONFIG_FB_NEOMAGIC is not set ++# CONFIG_FB_KYRO is not set ++# CONFIG_FB_3DFX is not set ++# CONFIG_FB_VOODOO1 is not set ++# CONFIG_FB_VT8623 is not set ++# CONFIG_FB_CYBLA is not set ++# CONFIG_FB_TRIDENT is not set ++# CONFIG_FB_ARK is not set ++# CONFIG_FB_PM3 is not set ++CONFIG_FB_GEODE=y ++CONFIG_FB_GEODE_LX=y ++CONFIG_FB_GEODE_GX=y ++# CONFIG_FB_GEODE_GX1 is not set ++CONFIG_FB_OLPC_DCON=y ++# CONFIG_FB_VIRTUAL is not set ++ ++# ++# Console display driver support ++# ++CONFIG_VGA_CONSOLE=y ++CONFIG_VGACON_SOFT_SCROLLBACK=y ++CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 ++CONFIG_VIDEO_SELECT=y ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y ++CONFIG_FONTS=y ++# CONFIG_FONT_8x8 is not set ++CONFIG_FONT_8x16=y ++# CONFIG_FONT_6x11 is not set ++# CONFIG_FONT_7x14 is not set ++# CONFIG_FONT_PEARL_8x8 is not set ++# CONFIG_FONT_ACORN_8x8 is not set ++# CONFIG_FONT_MINI_4x6 is not set ++# CONFIG_FONT_SUN8x16 is not set ++CONFIG_FONT_SUN12x22=y ++# CONFIG_FONT_10x18 is not set ++CONFIG_LOGO=y ++# CONFIG_LOGO_LINUX_MONO is not set ++# CONFIG_LOGO_LINUX_VGA16 is not set ++CONFIG_LOGO_LINUX_CLUT224=y ++ ++# ++# Sound ++# ++CONFIG_SOUND=m ++ ++# ++# Advanced Linux Sound Architecture ++# ++CONFIG_SND=m ++CONFIG_SND_TIMER=m ++CONFIG_SND_PCM=m ++CONFIG_SND_HWDEP=m ++CONFIG_SND_RAWMIDI=m ++CONFIG_SND_SEQUENCER=m ++CONFIG_SND_SEQ_DUMMY=m ++CONFIG_SND_OSSEMUL=y ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_PCM_OSS_PLUGINS=y ++CONFIG_SND_SEQUENCER_OSS=y ++CONFIG_SND_DYNAMIC_MINORS=y ++# CONFIG_SND_SUPPORT_OLD_API is not set ++CONFIG_SND_VERBOSE_PROCFS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++ ++# ++# Generic devices ++# ++CONFIG_SND_MPU401_UART=m ++CONFIG_SND_AC97_CODEC=m ++CONFIG_SND_DUMMY=m ++CONFIG_SND_VIRMIDI=m ++CONFIG_SND_MTPAV=m ++# CONFIG_SND_SERIAL_U16550 is not set ++CONFIG_SND_MPU401=m ++ ++# ++# PCI devices ++# ++# CONFIG_SND_AD1889 is not set ++# CONFIG_SND_ALS300 is not set ++# CONFIG_SND_ALS4000 is not set ++# CONFIG_SND_ALI5451 is not set ++# CONFIG_SND_ATIIXP is not set ++# CONFIG_SND_ATIIXP_MODEM is not set ++# CONFIG_SND_AU8810 is not set ++# CONFIG_SND_AU8820 is not set ++# CONFIG_SND_AU8830 is not set ++# CONFIG_SND_AZT3328 is not set ++# CONFIG_SND_BT87X is not set ++# CONFIG_SND_CA0106 is not set ++# CONFIG_SND_CMIPCI is not set ++# CONFIG_SND_CS4281 is not set ++# CONFIG_SND_CS46XX is not set ++CONFIG_SND_CS5535AUDIO=m ++# CONFIG_SND_DARLA20 is not set ++# CONFIG_SND_GINA20 is not set ++# CONFIG_SND_LAYLA20 is not set ++# CONFIG_SND_DARLA24 is not set ++# CONFIG_SND_GINA24 is not set ++# CONFIG_SND_LAYLA24 is not set ++# CONFIG_SND_MONA is not set ++# CONFIG_SND_MIA is not set ++# CONFIG_SND_ECHO3G is not set ++# CONFIG_SND_INDIGO is not set ++# CONFIG_SND_INDIGOIO is not set ++# CONFIG_SND_INDIGODJ is not set ++# CONFIG_SND_EMU10K1 is not set ++# CONFIG_SND_EMU10K1X is not set ++CONFIG_SND_ENS1370=m ++# CONFIG_SND_ENS1371 is not set ++# CONFIG_SND_ES1938 is not set ++# CONFIG_SND_ES1968 is not set ++# CONFIG_SND_FM801 is not set ++# CONFIG_SND_HDA_INTEL is not set ++# CONFIG_SND_HDSP is not set ++# CONFIG_SND_HDSPM is not set ++# CONFIG_SND_ICE1712 is not set ++# CONFIG_SND_ICE1724 is not set ++# CONFIG_SND_INTEL8X0 is not set ++# CONFIG_SND_INTEL8X0M is not set ++# CONFIG_SND_KORG1212 is not set ++# CONFIG_SND_MAESTRO3 is not set ++# CONFIG_SND_MIXART is not set ++# CONFIG_SND_NM256 is not set ++# CONFIG_SND_PCXHR is not set ++# CONFIG_SND_RIPTIDE is not set ++# CONFIG_SND_RME32 is not set ++# CONFIG_SND_RME96 is not set ++# CONFIG_SND_RME9652 is not set ++# CONFIG_SND_SONICVIBES is not set ++# CONFIG_SND_TRIDENT is not set ++# CONFIG_SND_VIA82XX is not set ++# CONFIG_SND_VIA82XX_MODEM is not set ++# CONFIG_SND_VX222 is not set ++# CONFIG_SND_YMFPCI is not set ++CONFIG_SND_AC97_POWER_SAVE=y ++ ++# ++# USB devices ++# ++CONFIG_SND_USB_AUDIO=m ++CONFIG_SND_USB_USX2Y=m ++# CONFIG_SND_USB_CAIAQ is not set ++ ++# ++# System on Chip audio support ++# ++# CONFIG_SND_SOC is not set ++ ++# ++# Open Sound System ++# ++# CONFIG_SOUND_PRIME is not set ++CONFIG_AC97_BUS=m ++ ++# ++# HID Devices ++# ++CONFIG_HID=y ++# CONFIG_HID_DEBUG is not set ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=y ++# CONFIG_USB_HIDINPUT_POWERBOOK is not set ++# CONFIG_HID_FF is not set ++CONFIG_USB_HIDDEV=y ++ ++# ++# USB support ++# ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++CONFIG_USB_ARCH_HAS_EHCI=y ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++# CONFIG_USB_DEVICE_CLASS is not set ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_SUSPEND is not set ++CONFIG_USB_PERSIST=y ++# CONFIG_USB_OTG is not set ++ ++# ++# USB Host Controller Drivers ++# ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_SPLIT_ISO=y ++CONFIG_USB_EHCI_ROOT_HUB_TT=y ++# CONFIG_USB_EHCI_TT_NEWSCHED is not set ++# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_UHCI_HCD is not set ++# CONFIG_USB_SL811_HCD is not set ++ ++# ++# USB Device Class drivers ++# ++CONFIG_USB_ACM=m ++CONFIG_USB_PRINTER=m ++ ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++ ++# ++# may also be needed; see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++# CONFIG_USB_STORAGE_DEBUG is not set ++CONFIG_USB_STORAGE_DATAFAB=y ++CONFIG_USB_STORAGE_FREECOM=y ++CONFIG_USB_STORAGE_DPCM=y ++CONFIG_USB_STORAGE_USBAT=y ++CONFIG_USB_STORAGE_SDDR09=y ++CONFIG_USB_STORAGE_SDDR55=y ++CONFIG_USB_STORAGE_JUMPSHOT=y ++CONFIG_USB_STORAGE_ALAUDA=y ++# CONFIG_USB_STORAGE_KARMA is not set ++CONFIG_USB_LIBUSUAL=y ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++CONFIG_USB_MON=y ++ ++# ++# USB port drivers ++# ++ ++# ++# USB Serial Converter support ++# ++CONFIG_USB_SERIAL=m ++CONFIG_USB_SERIAL_GENERIC=y ++# CONFIG_USB_SERIAL_AIRCABLE is not set ++# CONFIG_USB_SERIAL_AIRPRIME is not set ++# CONFIG_USB_SERIAL_ARK3116 is not set ++# CONFIG_USB_SERIAL_BELKIN is not set ++# CONFIG_USB_SERIAL_WHITEHEAT is not set ++# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set ++CONFIG_USB_SERIAL_CP2101=m ++# CONFIG_USB_SERIAL_CYPRESS_M8 is not set ++# CONFIG_USB_SERIAL_EMPEG is not set ++# CONFIG_USB_SERIAL_FTDI_SIO is not set ++# CONFIG_USB_SERIAL_FUNSOFT is not set ++# CONFIG_USB_SERIAL_VISOR is not set ++# CONFIG_USB_SERIAL_IPAQ is not set ++# CONFIG_USB_SERIAL_IR is not set ++# CONFIG_USB_SERIAL_EDGEPORT is not set ++# CONFIG_USB_SERIAL_EDGEPORT_TI is not set ++# CONFIG_USB_SERIAL_GARMIN is not set ++# CONFIG_USB_SERIAL_IPW is not set ++# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set ++# CONFIG_USB_SERIAL_KEYSPAN is not set ++# CONFIG_USB_SERIAL_KLSI is not set ++# CONFIG_USB_SERIAL_KOBIL_SCT is not set ++# CONFIG_USB_SERIAL_MCT_U232 is not set ++# CONFIG_USB_SERIAL_MOS7720 is not set ++# CONFIG_USB_SERIAL_MOS7840 is not set ++# CONFIG_USB_SERIAL_NAVMAN is not set ++CONFIG_USB_SERIAL_PL2303=m ++# CONFIG_USB_SERIAL_HP4X is not set ++# CONFIG_USB_SERIAL_SAFE is not set ++# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set ++# CONFIG_USB_SERIAL_TI is not set ++# CONFIG_USB_SERIAL_CYBERJACK is not set ++# CONFIG_USB_SERIAL_XIRCOM is not set ++# CONFIG_USB_SERIAL_OPTION is not set ++# CONFIG_USB_SERIAL_OMNINET is not set ++# CONFIG_USB_SERIAL_DEBUG is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_AUERSWALD is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_SISUSBVGA is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set ++ ++# ++# USB DSL modem support ++# ++ ++# ++# USB Gadget Support ++# ++# CONFIG_USB_GADGET is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++ ++# ++# MMC/SD Host Controller Drivers ++# ++CONFIG_MMC_SDHCI=y ++# CONFIG_MMC_WBSD is not set ++# CONFIG_MMC_TIFM_SD is not set ++ ++# ++# LED devices ++# ++CONFIG_NEW_LEDS=y ++CONFIG_LEDS_CLASS=y ++ ++# ++# LED drivers ++# ++CONFIG_LEDS_OLPC=y ++ ++# ++# LED Triggers ++# ++CONFIG_LEDS_TRIGGERS=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++# CONFIG_LEDS_TRIGGER_IDE_DISK is not set ++CONFIG_LEDS_TRIGGER_HEARTBEAT=y ++ ++# ++# InfiniBand support ++# ++# CONFIG_INFINIBAND is not set ++ ++# ++# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) ++# ++# CONFIG_EDAC is not set ++ ++# ++# Real Time Clock ++# ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++# CONFIG_RTC_HCTOSYS is not set ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set ++ ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++ ++# ++# SPI RTC drivers ++# ++ ++# ++# Platform RTC drivers ++# ++CONFIG_RTC_DRV_CMOS=y ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++ ++# ++# DMA Engine support ++# ++# CONFIG_DMA_ENGINE is not set ++ ++# ++# DMA Clients ++# ++ ++# ++# DMA Devices ++# ++ ++# ++# Virtualization ++# ++# CONFIG_KVM is not set ++ ++# ++# Sysprof ++# ++CONFIG_SYSPROF=m ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++CONFIG_EXT2_FS_XATTR=y ++CONFIG_EXT2_FS_POSIX_ACL=y ++CONFIG_EXT2_FS_SECURITY=y ++CONFIG_EXT2_FS_XIP=y ++CONFIG_FS_XIP=y ++CONFIG_EXT3_FS=y ++CONFIG_EXT3_FS_XATTR=y ++CONFIG_EXT3_FS_POSIX_ACL=y ++CONFIG_EXT3_FS_SECURITY=y ++# CONFIG_EXT4DEV_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++CONFIG_FS_MBCACHE=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_ROMFS_FS is not set ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++CONFIG_QUOTA=y ++# CONFIG_QFMT_V1 is not set ++CONFIG_QFMT_V2=y ++CONFIG_QUOTACTL=y ++CONFIG_DNOTIFY=y ++CONFIG_AUTOFS_FS=m ++CONFIG_AUTOFS4_FS=m ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++CONFIG_ISO9660_FS=y ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_UDF_FS=m ++CONFIG_UDF_NLS=y ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=m ++CONFIG_MSDOS_FS=m ++CONFIG_VFAT_FS=m ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="ascii" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_KCORE=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++CONFIG_HUGETLBFS=y ++CONFIG_HUGETLB_PAGE=y ++CONFIG_PROMFS_FS=y ++CONFIG_RAMFS=y ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_ECRYPT_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++CONFIG_JFFS2_SUMMARY=y ++CONFIG_JFFS2_FS_XATTR=y ++CONFIG_JFFS2_FS_POSIX_ACL=y ++CONFIG_JFFS2_FS_SECURITY=y ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++CONFIG_CRAMFS=m ++# CONFIG_VXFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Network File Systems ++# ++CONFIG_NFS_FS=m ++CONFIG_NFS_V3=y ++CONFIG_NFS_V3_ACL=y ++CONFIG_NFS_V4=y ++CONFIG_NFS_DIRECTIO=y ++# CONFIG_NFSD is not set ++CONFIG_LOCKD=m ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_ACL_SUPPORT=m ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=m ++CONFIG_SUNRPC_GSS=m ++# CONFIG_SUNRPC_BIND34 is not set ++CONFIG_RPCSEC_GSS_KRB5=m ++CONFIG_RPCSEC_GSS_SPKM3=m ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++# CONFIG_9P_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++# CONFIG_BSD_DISKLABEL is not set ++# CONFIG_MINIX_SUBPARTITION is not set ++# CONFIG_SOLARIS_X86_PARTITION is not set ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++ ++# ++# Native Language Support ++# ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="utf8" ++CONFIG_NLS_CODEPAGE_437=y ++CONFIG_NLS_CODEPAGE_737=m ++CONFIG_NLS_CODEPAGE_775=m ++CONFIG_NLS_CODEPAGE_850=m ++CONFIG_NLS_CODEPAGE_852=m ++CONFIG_NLS_CODEPAGE_855=m ++CONFIG_NLS_CODEPAGE_857=m ++CONFIG_NLS_CODEPAGE_860=m ++CONFIG_NLS_CODEPAGE_861=m ++CONFIG_NLS_CODEPAGE_862=m ++CONFIG_NLS_CODEPAGE_863=m ++CONFIG_NLS_CODEPAGE_864=m ++CONFIG_NLS_CODEPAGE_865=m ++CONFIG_NLS_CODEPAGE_866=m ++CONFIG_NLS_CODEPAGE_869=m ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++CONFIG_NLS_CODEPAGE_932=m ++CONFIG_NLS_CODEPAGE_949=m ++CONFIG_NLS_CODEPAGE_874=m ++CONFIG_NLS_ISO8859_8=m ++CONFIG_NLS_CODEPAGE_1250=m ++CONFIG_NLS_CODEPAGE_1251=m ++CONFIG_NLS_ASCII=y ++CONFIG_NLS_ISO8859_1=m ++CONFIG_NLS_ISO8859_2=m ++CONFIG_NLS_ISO8859_3=m ++CONFIG_NLS_ISO8859_4=m ++CONFIG_NLS_ISO8859_5=m ++CONFIG_NLS_ISO8859_6=m ++CONFIG_NLS_ISO8859_7=m ++CONFIG_NLS_ISO8859_9=m ++CONFIG_NLS_ISO8859_13=m ++CONFIG_NLS_ISO8859_14=m ++CONFIG_NLS_ISO8859_15=m ++CONFIG_NLS_KOI8_R=m ++CONFIG_NLS_KOI8_U=m ++CONFIG_NLS_UTF8=m ++ ++# ++# Distributed Lock Manager ++# ++# CONFIG_DLM is not set ++ ++# ++# Instrumentation Support ++# ++CONFIG_PROFILING=y ++CONFIG_OPROFILE=m ++CONFIG_KPROBES=y ++ ++# ++# Kernel hacking ++# ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_PRINTK_TIME=y ++# CONFIG_ENABLE_MUST_CHECK is not set ++CONFIG_MAGIC_SYSRQ=y ++CONFIG_UNUSED_SYMBOLS=y ++CONFIG_DEBUG_FS=y ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++CONFIG_SCHEDSTATS=y ++CONFIG_TIMER_STATS=y ++# CONFIG_DEBUG_SLAB is not set ++CONFIG_DEBUG_PREEMPT=y ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++CONFIG_DEBUG_SPINLOCK=y ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++CONFIG_DEBUG_SPINLOCK_SLEEP=y ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++# CONFIG_DEBUG_BUGVERBOSE is not set ++CONFIG_DEBUG_INFO=y ++CONFIG_DEBUG_VM=y ++CONFIG_DEBUG_LIST=y ++# CONFIG_FRAME_POINTER is not set ++# CONFIG_FORCED_INLINING is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_LKDTM is not set ++# CONFIG_FAULT_INJECTION is not set ++CONFIG_EARLY_PRINTK=y ++CONFIG_DEBUG_STACKOVERFLOW=y ++CONFIG_DEBUG_STACK_USAGE=y ++ ++# ++# Page alloc debug is incompatible with Software Suspend on i386 ++# ++CONFIG_DEBUG_RODATA=y ++CONFIG_4KSTACKS=y ++CONFIG_DOUBLEFAULT=y ++ ++# ++# Security options ++# ++CONFIG_KEYS=y ++CONFIG_KEYS_DEBUG_PROC_KEYS=y ++CONFIG_SECURITY=y ++CONFIG_SECURITY_NETWORK=y ++CONFIG_SECURITY_NETWORK_XFRM=y ++CONFIG_SECURITY_CAPABILITIES=y ++# CONFIG_SECURITY_ROOTPLUG is not set ++CONFIG_SECURITY_SELINUX=y ++CONFIG_SECURITY_SELINUX_BOOTPARAM=y ++CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 ++# CONFIG_SECURITY_SELINUX_DISABLE is not set ++CONFIG_SECURITY_SELINUX_DEVELOP=y ++CONFIG_SECURITY_SELINUX_AVC_STATS=y ++CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 ++# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set ++# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set ++ ++# ++# Cryptographic options ++# ++CONFIG_CRYPTO=y ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_BLKCIPHER=y ++CONFIG_CRYPTO_HASH=y ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_HMAC=y ++CONFIG_CRYPTO_XCBC=m ++CONFIG_CRYPTO_NULL=m ++CONFIG_CRYPTO_MD4=m ++CONFIG_CRYPTO_MD5=y ++CONFIG_CRYPTO_SHA1=y ++CONFIG_CRYPTO_SHA256=m ++CONFIG_CRYPTO_SHA512=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_GF128MUL=m ++CONFIG_CRYPTO_ECB=m ++CONFIG_CRYPTO_CBC=m ++CONFIG_CRYPTO_PCBC=m ++CONFIG_CRYPTO_LRW=m ++# CONFIG_CRYPTO_CRYPTD is not set ++CONFIG_CRYPTO_DES=m ++CONFIG_CRYPTO_FCRYPT=m ++CONFIG_CRYPTO_BLOWFISH=m ++CONFIG_CRYPTO_TWOFISH=m ++CONFIG_CRYPTO_TWOFISH_COMMON=m ++# CONFIG_CRYPTO_TWOFISH_586 is not set ++CONFIG_CRYPTO_SERPENT=m ++CONFIG_CRYPTO_AES=m ++CONFIG_CRYPTO_AES_586=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_CAST6=m ++CONFIG_CRYPTO_TEA=m ++CONFIG_CRYPTO_ARC4=m ++CONFIG_CRYPTO_KHAZAD=m ++CONFIG_CRYPTO_ANUBIS=m ++CONFIG_CRYPTO_DEFLATE=m ++CONFIG_CRYPTO_MICHAEL_MIC=m ++CONFIG_CRYPTO_CRC32C=m ++CONFIG_CRYPTO_CAMELLIA=m ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Hardware crypto devices ++# ++# CONFIG_CRYPTO_DEV_PADLOCK is not set ++CONFIG_CRYPTO_DEV_GEODE=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=m ++CONFIG_CRC16=m ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++CONFIG_LIBCRC32C=m ++CONFIG_AUDIT_GENERIC=y ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_REED_SOLOMON=y ++CONFIG_REED_SOLOMON_DEC16=y ++CONFIG_TEXTSEARCH=y ++CONFIG_TEXTSEARCH_KMP=m ++CONFIG_TEXTSEARCH_BM=m ++CONFIG_TEXTSEARCH_FSM=m ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y ++CONFIG_HAS_DMA=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_X86_BIOS_REBOOT=y ++CONFIG_KTIME_SCALAR=y +diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile +index 9d33b00..2e2cf42 100644 +--- a/arch/i386/kernel/Makefile ++++ b/arch/i386/kernel/Makefile +@@ -39,13 +39,17 @@ obj-$(CONFIG_VM86) += vm86.o + obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + obj-$(CONFIG_HPET_TIMER) += hpet.o + obj-$(CONFIG_K8_NB) += k8.o +-obj-$(CONFIG_MGEODE_LX) += geode.o ++obj-$(CONFIG_MGEODE_LX) += geode.o mfgpt.o + + obj-$(CONFIG_VMI) += vmi.o vmiclock.o + obj-$(CONFIG_PARAVIRT) += paravirt.o + obj-y += pcspeaker.o + + obj-$(CONFIG_SCx200) += scx200.o ++obj-$(CONFIG_OLPC) += olpc.o ++obj-$(CONFIG_OLPC_PM) += olpc-pm.o olpc-wakeup.o ++obj-$(CONFIG_OPEN_FIRMWARE) += ofw.o ++obj-$(CONFIG_PROMFS_FS) += prom.o + + # vsyscall.o contains the vsyscall DSO images as __initdata. + # We must build both images before we can assemble it. +diff --git a/arch/i386/kernel/geode.c b/arch/i386/kernel/geode.c +index 41e8aec..637e301 100644 +--- a/arch/i386/kernel/geode.c ++++ b/arch/i386/kernel/geode.c +@@ -145,10 +145,14 @@ EXPORT_SYMBOL_GPL(geode_gpio_setup_event); + + static int __init geode_southbridge_init(void) + { ++ int timers; ++ + if (!is_geode()) + return -ENODEV; + + init_lbars(); ++ timers = geode_mfgpt_detect(); ++ printk(KERN_INFO "geode-mfgpt: %d timers available.\n", timers); + return 0; + } + +diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S +index 8f03821..3176280 100644 +--- a/arch/i386/kernel/head.S ++++ b/arch/i386/kernel/head.S +@@ -117,8 +117,34 @@ ENTRY(startup_32) + movl $(COMMAND_LINE_SIZE/4),%ecx + rep + movsl ++ ++#ifdef CONFIG_OPEN_FIRMWARE ++/* ++ * If Open Firmware booted us, save the OFW client interface callback address ++ * and preserve the OFW page mappings by priming the kernel's new page ++ * directory area with a copy of the OFW page directory. That lets OFW stay ++ * resident in high memory (high in both the virtual and physical spaces) ++ * for at least long enough to copy out the device tree. ++ */ + 1: ++ movl $(boot_params - __PAGE_OFFSET + OFW_INFO_OFFSET), %ebp ++ cmpl $0x2057464F, (%ebp) /* Magic number "OFW " */ ++ jne 1f ++ ++ mov 0x8(%ebp), %eax /* Save callback address */ ++ mov %eax, call_firmware - __PAGE_OFFSET + ++ /* Copy the OFW pdir into swapper_pg_dir */ ++ movl %esi, %edx /* save %esi */ ++ movl $(swapper_pg_dir - __PAGE_OFFSET), %edi ++ movl %cr3, %esi /* Source is current pg_dir base address */ ++ movl $1024, %ecx /* Number of page directory entries */ ++ rep ++ movsl ++ movl %edx, %esi /* restore %esi */ ++#endif ++ ++1: + /* + * Initialize page tables. This creates a PDE and a set of page + * tables, which are located immediately beyond _end. The variable +@@ -129,6 +155,7 @@ ENTRY(startup_32) + * Warning: don't use %esi or the stack in this code. However, %esp + * can be used as a GPR if you really need it... + */ ++ + page_pde_offset = (__PAGE_OFFSET >> 20); + + movl $(pg0 - __PAGE_OFFSET), %edi +diff --git a/arch/i386/kernel/mfgpt.c b/arch/i386/kernel/mfgpt.c +new file mode 100644 +index 0000000..2e62a41 +--- /dev/null ++++ b/arch/i386/kernel/mfgpt.c +@@ -0,0 +1,354 @@ ++/* Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT) ++ * ++ * Copyright (C) 2006, Advanced Micro Devices, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++ ++/* The MFPGT timers on the CS5536 provide us with suitable timers to use ++ * as clock event sources - not as good as a HPET or APIC, but certainly ++ * better then the PIT. This isn't a general purpose MFGPT driver, but ++ * a simplified one designed specifically to act as a clock event source. ++ * For full details about the MFGPT, please consult the CS5536 data sheet. ++*/ ++ ++/* We are using the 32Khz input clock - its the only one that has the ++ * ranges we find desirable. The following table lists the suitable ++ * divisors and the associated hz, minimum interval ++ * and the maximum interval: ++ ++ Divisor Hz Min Delta (S) Max Delta (S) ++ 1 32000 .0005 2.048 ++ 2 16000 .001 4.096 ++ 4 8000 .002 8.192 ++ 8 4000 .004 16.384 ++ 16 2000 .008 32.768 ++ 32 1000 .016 65.536 ++ 64 500 .032 131.072 ++ 128 250 .064 262.144 ++ 256 125 .128 524.288 ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "do_timer.h" ++ ++#define MFGPT_MAX_TIMERS 8 ++ ++#define F_AVAIL 0x01 ++ ++static struct mfgpt_timer_t { ++ int flags; ++ struct module *owner; ++} mfgpt_timers[MFGPT_MAX_TIMERS]; ++ ++/* Selected from the table above */ ++ ++#define MFGPT_DIVISOR 16 ++#define MFGPT_SCALE 4 /* divisor = 2^(scale) */ ++#define MFGPT_HZ (32000 / MFGPT_DIVISOR) ++#define MFGPT_PERIODIC (MFGPT_HZ / HZ) ++ ++#ifdef CONFIG_GEODE_MFGPT_TIMER ++static int __init mfgpt_timer_setup(void); ++#else ++#define mfgpt_timer_setup() (0) ++#endif ++ ++/* Allow for disabling of MFGPTs */ ++static int disable = 0; ++static int __init mfgpt_disable(char *s) ++{ ++ disable = 1; ++ return 1; ++} ++__setup("nomfgpt", mfgpt_disable); ++ ++/* ++ * Check whether any MFGPTs are available for the kernel to use. In most ++ * cases, firmware that uses AMD's VSA code will claim all timers during ++ * bootup; we certainly don't want to take them if they're already in use. ++ * In other cases (such as with VSAless OpenFirmware), the system firmware ++ * leaves timers available for us to use. ++ */ ++int __init geode_mfgpt_detect(void) ++{ ++ int count = 0, i; ++ u16 val; ++ ++ if (disable) { ++ printk(KERN_INFO "geode-mfgpt: Skipping MFGPT setup\n"); ++ return 0; ++ } ++ ++ for (i = 0; i < MFGPT_MAX_TIMERS; i++) { ++ val = geode_mfgpt_read(i, MFGPT_REG_SETUP); ++ if (!(val & MFGPT_SETUP_SETUP)) { ++ mfgpt_timers[i].flags = F_AVAIL; ++ count++; ++ } ++ } ++ ++ /* set up clock event device, if desired */ ++ i = mfgpt_timer_setup(); ++ ++ return count; ++} ++ ++int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable) ++{ ++ u32 msr, mask, value, dummy; ++ int shift = (cmp == MFGPT_CMP1) ? 0 : 8; ++ ++ if (timer < 0 || timer >= MFGPT_MAX_TIMERS) ++ return -EIO; ++ ++ /* ++ * The register maps for these are described in sections 6.17.1.x of ++ * the AMD Geode CS5536 Companion Device Data Book. ++ */ ++ switch(event) { ++ case MFGPT_EVENT_RESET: ++ /* XXX: According to the docs, we cannot reset timers above ++ * 6; that is, resets for 7 and 8 will be ignored. Is this ++ * a problem? */ ++ msr = MFGPT_NR_MSR; ++ mask = 1 << (timer + 24); ++ break; ++ ++ case MFGPT_EVENT_NMI: ++ msr = MFGPT_NR_MSR; ++ mask = 1 << (timer + shift); ++ break; ++ ++ case MFGPT_EVENT_IRQ: ++ msr = MFGPT_IRQ_MSR; ++ mask = 1 << (timer + shift); ++ break; ++ ++ default: ++ return -EIO; ++ } ++ ++ rdmsr(msr, value, dummy); ++ ++ if (enable) ++ value |= mask; ++ else ++ value &= ~mask; ++ ++ wrmsr(msr, value, dummy); ++ return 0; ++} ++EXPORT_SYMBOL(geode_mfgpt_toggle_event); ++ ++int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable) ++{ ++ u32 val, dummy; ++ int offset; ++ ++ if (timer < 0 || timer >= MFGPT_MAX_TIMERS) ++ return -EIO; ++ ++ if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable)) ++ return -EIO; ++ ++ rdmsr(0x51400022, val, dummy); ++ ++ offset = (timer % 4) * 4; ++ ++ val &= ~((0xF << offset) | (0xF << (offset + 16))); ++ ++ if (enable) { ++ val |= (irq & 0x0F) << (offset); ++ val |= (irq & 0x0F) << (offset + 16); ++ } ++ ++ wrmsr(0x51400022, val, dummy); ++ return 0; ++} ++EXPORT_SYMBOL(geode_mfgpt_set_irq); ++ ++static int mfgpt_get(int timer, struct module *owner) ++{ ++ mfgpt_timers[timer].flags &= ~F_AVAIL; ++ mfgpt_timers[timer].owner = owner; ++ printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer); ++ return timer; ++} ++ ++int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner) ++{ ++ int i; ++ ++ if (!geode_get_dev_base(GEODE_DEV_MFGPT)) ++ return -ENODEV; ++ if (timer >= MFGPT_MAX_TIMERS) ++ return -EIO; ++ ++ if (timer < 0) { ++ /* Try to find an available timer */ ++ for (i = 0; i < MFGPT_MAX_TIMERS; i++) { ++ if (mfgpt_timers[i].flags & F_AVAIL) ++ return mfgpt_get(i, owner); ++ ++ if (i == 5 && domain == MFGPT_DOMAIN_WORKING) ++ break; ++ } ++ } ++ else { ++ /* If they requested a specific timer, try to honor that */ ++ if (mfgpt_timers[timer].flags & F_AVAIL) ++ return mfgpt_get(timer, owner); ++ } ++ ++ /* No timers available - too bad */ ++ return -1; ++} ++EXPORT_SYMBOL(geode_mfgpt_alloc_timer); ++ ++#ifdef CONFIG_GEODE_MFGPT_TIMER ++ ++static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN; ++static u16 mfgpt_event_clock; ++ ++static int irq = 7; ++static int __init mfgpt_setup(char *str) ++{ ++ get_option(&str, &irq); ++ return 1; ++} ++__setup("mfgpt_irq=", mfgpt_setup); ++ ++static inline void mfgpt_disable_timer(u16 clock) ++{ ++ u16 val = geode_mfgpt_read(clock, MFGPT_REG_SETUP); ++ geode_mfgpt_write(clock, MFGPT_REG_SETUP, val & ~MFGPT_SETUP_CNTEN); ++} ++ ++static int mfgpt_next_event(unsigned long, struct clock_event_device *); ++static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *); ++ ++static struct clock_event_device mfgpt_clockevent = { ++ .name = "mfgpt-timer", ++ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, ++ .set_mode = mfgpt_set_mode, ++ .set_next_event = mfgpt_next_event, ++ .rating = 250, ++ .cpumask = CPU_MASK_ALL, ++ .shift = 32 ++}; ++ ++static inline void mfgpt_start_timer(u16 clock, u16 delta) ++{ ++ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta); ++ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0); ++ ++ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, ++ MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2); ++} ++ ++static void mfgpt_set_mode(enum clock_event_mode mode, ++ struct clock_event_device *evt) ++{ ++ mfgpt_disable_timer(mfgpt_event_clock); ++ ++ if (mode == CLOCK_EVT_MODE_PERIODIC) ++ mfgpt_start_timer(mfgpt_event_clock, MFGPT_PERIODIC); ++ ++ mfgpt_tick_mode = mode; ++} ++ ++static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt) ++{ ++ mfgpt_start_timer(mfgpt_event_clock, delta); ++ return 0; ++} ++ ++/* Assume (foolishly?), that this interrupt was due to our tick */ ++ ++static irqreturn_t mfgpt_tick(int irq, void *dev_id) ++{ ++ if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN) ++ return IRQ_HANDLED; ++ ++ /* Turn off the clock */ ++ mfgpt_disable_timer(mfgpt_event_clock); ++ ++ /* Clear the counter */ ++ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0); ++ ++ /* Restart the clock in periodic mode */ ++ ++ if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) { ++ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, ++ MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2); ++ } ++ ++ mfgpt_clockevent.event_handler(&mfgpt_clockevent); ++ return IRQ_HANDLED; ++} ++ ++static struct irqaction mfgptirq = { ++ .handler = mfgpt_tick, ++ .flags = IRQF_DISABLED | IRQF_NOBALANCING, ++ .mask = CPU_MASK_NONE, ++ .name = "mfgpt-timer" ++}; ++ ++static int __init mfgpt_timer_setup(void) ++{ ++ int timer, ret; ++ u16 val; ++ ++ timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING, THIS_MODULE); ++ if (timer < 0) { ++ printk(KERN_ERR "mfgpt-timer: Could not allocate a MFPGT timer\n"); ++ return -ENODEV; ++ } ++ ++ mfgpt_event_clock = timer; ++ /* Set the clock scale and enable the event mode for CMP2 */ ++ val = MFGPT_SCALE | (3 << 8); ++ ++ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val); ++ ++ /* Set up the IRQ on the MFGPT side */ ++ if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) { ++ printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq); ++ return -EIO; ++ } ++ ++ /* And register it with the kernel */ ++ ret = setup_irq(irq, &mfgptirq); ++ ++ if (ret) { ++ printk(KERN_ERR "mfgpt-timer: Unable to set up the interrupt.\n"); ++ goto err; ++ } ++ ++ /* Set up the clock event */ ++ mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, 32); ++ mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &mfgpt_clockevent); ++ mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE, &mfgpt_clockevent); ++ ++ printk("mfgpt-timer: registering the MFGT timer as a clock event.\n"); ++ clockevents_register_device(&mfgpt_clockevent); ++ ++ return 0; ++ ++err: ++ geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq); ++ printk(KERN_ERR "mfgpt-timer: Unable to set up the MFGPT clock source\n"); ++ return -EIO; ++} ++ ++#endif +diff --git a/arch/i386/kernel/ofw.c b/arch/i386/kernel/ofw.c +new file mode 100644 +index 0000000..fdcd936 +--- /dev/null ++++ b/arch/i386/kernel/ofw.c +@@ -0,0 +1,100 @@ ++/* ++ * ofw.c - Open Firmware client interface for 32-bit systems. ++ * This code is intended to be portable to any 32-bit Open Firmware ++ * implementation with a standard client interface that can be ++ * called when Linux is running. ++ * ++ * Copyright (C) 2007 Mitch Bradley ++ * Copyright (C) 2007 Andres Salomon ++ */ ++ ++#include ++#include ++#include ++#include ++ ++ ++int (*call_firmware)(int *); ++ ++static DEFINE_SPINLOCK(prom_lock); ++ ++#define MAXARGS 20 ++ ++/* ++ * The return value from ofw() in all cases is 0 if the attempt to call the ++ * function succeeded, <0 otherwise. That return value is from the ++ * gateway function only. Any results from the called function are returned ++ * via output argument pointers. ++ * ++ * Here are call templates for all the standard OFW client services: ++ * ++ * ofw("test", 1, 1, namestr, &missing); ++ * ofw("peer", 1, 1, phandle, &sibling_phandle); ++ * ofw("child", 1, 1, phandle, &child_phandle); ++ * ofw("parent", 1, 1, phandle, &parent_phandle); ++ * ofw("instance_to_package", 1, 1, ihandle, &phandle); ++ * ofw("getproplen", 2, 1, phandle, namestr, &proplen); ++ * ofw("getprop", 4, 1, phandle, namestr, bufaddr, buflen, &size); ++ * ofw("nextprop", 3, 1, phandle, previousstr, bufaddr, &flag); ++ * ofw("setprop", 4, 1, phandle, namestr, bufaddr, len, &size); ++ * ofw("canon", 3, 1, devspecstr, bufaddr, buflen, &length); ++ * ofw("finddevice", 1, 1, devspecstr, &phandle); ++ * ofw("instance-to-path", 3, 1, ihandle, bufaddr, buflen, &length); ++ * ofw("package-to-path", 3, 1, phandle, bufaddr, buflen, &length); ++ * ofw("call_method", numin, numout, in0, in1, ..., &out0, &out1, ...); ++ * ofw("open", 1, 1, devspecstr, &ihandle); ++ * ofw("close", 1, 0, ihandle); ++ * ofw("read", 3, 1, ihandle, addr, len, &actual); ++ * ofw("write", 3, 1, ihandle, addr, len, &actual); ++ * ofw("seek", 3, 1, ihandle, pos_hi, pos_lo, &status); ++ * ofw("claim", 3, 1, virtaddr, size, align, &baseaddr); ++ * ofw("release", 2, 0, virtaddr, size); ++ * ofw("boot", 1, 0, bootspecstr); ++ * ofw("enter", 0, 0); ++ * ofw("exit", 0, 0); ++ * ofw("chain", 5, 0, virtaddr, size, entryaddr, argsaddr, len); ++ * ofw("interpret", numin+1, numout+1, cmdstr, in0, ..., &catchres, &out0, ...); ++ * ofw("set-callback", 1, 1, newfuncaddr, &oldfuncaddr); ++ * ofw("set-symbol-lookup", 2, 0, symtovaladdr, valtosymaddr); ++ * ofw("milliseconds", 0, 1, &ms); ++ */ ++ ++int ofw(char *name, int numargs, int numres, ...) ++{ ++ va_list ap; ++ int argarray[MAXARGS+3]; ++ int argnum = 3; ++ int retval; ++ int *intp; ++ unsigned long flags; ++ ++ if (!call_firmware) ++ return -1; ++ if ((numargs + numres) > MAXARGS) ++ return -1; /* spit out an error? */ ++ ++ argarray[0] = (int) name; ++ argarray[1] = numargs; ++ argarray[2] = numres; ++ ++ va_start(ap, numres); ++ while (numargs) { ++ argarray[argnum++] = va_arg(ap, int); ++ numargs--; ++ } ++ ++ spin_lock_irqsave(&prom_lock, flags); ++ retval = call_firmware(argarray); ++ spin_unlock_irqrestore(&prom_lock, flags); ++ ++ if (retval == 0) { ++ while (numres) { ++ intp = va_arg(ap, int *); ++ *intp = argarray[argnum++]; ++ numres--; ++ } ++ } ++ va_end(ap); ++ return retval; ++} ++EXPORT_SYMBOL(ofw); +diff --git a/arch/i386/kernel/olpc-pm.c b/arch/i386/kernel/olpc-pm.c +new file mode 100644 +index 0000000..93149f1 +--- /dev/null ++++ b/arch/i386/kernel/olpc-pm.c +@@ -0,0 +1,785 @@ ++/* olpc-pm.c ++ * © 2006 Red Hat, Inc. ++ * Portions also copyright 2006 Advanced Micro Devices, Inc. ++ * GPLv2 ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++/* A few words about accessing the ACPI and PM registers. Long story short, ++ byte and word accesses of the ACPI and PM registers is broken. The only ++ way to do it really correctly is to use dword accesses, which we do ++ throughout this code. For more details, please consult Eratta 17 and 18 ++ here: ++ ++ http://www.amd.com/files/connectivitysolutions/geode/geode_gx/34472D_CS5536_B1_specupdate.pdf ++*/ ++ ++#define PM_IRQ 3 ++ ++#define CS5536_PM_PWRBTN (1 << 8) ++#define CS5536_PM_RTC (1 << 10) ++ ++#define GPIO_WAKEUP_EC (1 << 31) ++#define GPIO_WAKEUP_LID (1 << 30) ++ ++#define PM_MODE_NORMAL 0 ++#define PM_MODE_TEST 1 ++#define PM_MODE_MAX 2 ++ ++/* These, and the battery EC commands, should be in an olpc.h. */ ++#define EC_WRITE_SCI_MASK 0x1b ++#define EC_READ_SCI_MASK 0x1c ++ ++extern void do_olpc_suspend_lowlevel(void); ++ ++static struct { ++ unsigned long address; ++ unsigned short segment; ++} ofw_bios_entry = { 0, __KERNEL_CS }; ++ ++static int olpc_pm_mode = PM_MODE_NORMAL; ++static unsigned long acpi_base; ++static unsigned long pms_base; ++static int sci_irq; ++static int olpc_lid_flag; ++ ++static struct input_dev *pm_inputdev; ++static struct input_dev *lid_inputdev; ++static struct input_dev *ebook_inputdev; ++static struct pm_ops olpc_pm_ops; ++ ++static int gpio_wake_events = 0; ++static int ebook_state = -1; ++static u16 olpc_wakeup_mask = 0; ++ ++struct platform_device olpc_powerbutton_dev = { ++ .name = "powerbutton", ++ .id = -1, ++}; ++ ++struct platform_device olpc_lid_dev = { ++ .name = "lid", ++ .id = -1, ++}; ++ ++static void __init init_ebook_state(void) ++{ ++ if (olpc_ec_cmd(0x2a, NULL, 0, (unsigned char *) &ebook_state, 1)) { ++ printk(KERN_WARNING "olpc-pm: failed to get EBOOK state!\n"); ++ ebook_state = 0; ++ } ++ ebook_state &= 1; ++ ++ /* the input layer needs to know what value to default to as well */ ++ input_report_switch(ebook_inputdev, SW_TABLET_MODE, ebook_state); ++ input_sync(ebook_inputdev); ++} ++ ++static void (*battery_callback)(unsigned long); ++static DEFINE_SPINLOCK(battery_callback_lock); ++ ++/* propagate_events is non-NULL if run from workqueue, ++ NULL when called at init time to flush SCI queue */ ++static void process_sci_queue(struct work_struct *propagate_events) ++{ ++ unsigned char data = 0; ++ unsigned char battery_events = 0; ++ int ret; ++ ++ do { ++ ret = olpc_ec_cmd(0x84, NULL, 0, &data, 1); ++ if (!ret) { ++ printk(KERN_DEBUG "olpc-pm: SCI 0x%x received\n", ++ data); ++ ++ switch (data) { ++ case EC_SCI_SRC_EMPTY: ++ case EC_SCI_SRC_GAME: ++ case EC_SCI_SRC_WLAN: ++ /* we ignore these for now */ ++ break; ++ case EC_SCI_SRC_BATERR: ++ printk(KERN_ERR "olpc-pm: Battery Management System detected an error! Remove turnip from battery slot.\n"); ++ case EC_SCI_SRC_BATSOC: ++ case EC_SCI_SRC_BATTERY: ++ case EC_SCI_SRC_ACPWR: ++ battery_events |= data; ++ break; ++ case EC_SCI_SRC_EBOOK: ++ ebook_state = !ebook_state; ++ if (propagate_events) { ++ input_report_switch(ebook_inputdev, ++ SW_TABLET_MODE, ebook_state); ++ input_sync(ebook_inputdev); ++ } ++ break; ++ default: ++ printk(KERN_ERR "olpc-pm: Unknown SCI event 0x%x occurred!\n", data); ++ } ++ } ++ } while (data && !ret); ++ ++ if (battery_events && battery_callback && propagate_events) { ++ void (*cbk)(unsigned long); ++ ++ /* Older EC versions didn't distinguish between AC and battery ++ events */ ++ if (olpc_platform_info.ecver < 0x45) ++ battery_events = EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR; ++ ++ spin_lock(&battery_callback_lock); ++ cbk = battery_callback; ++ spin_unlock(&battery_callback_lock); ++ ++ cbk(battery_events); ++ } ++ ++ if (ret) ++ printk(KERN_WARNING "Failed to clear SCI queue!\n"); ++} ++ ++static DECLARE_WORK(sci_work, process_sci_queue); ++ ++void olpc_register_battery_callback(void (*f)(unsigned long)) ++{ ++ spin_lock(&battery_callback_lock); ++ battery_callback = f; ++ spin_unlock(&battery_callback_lock); ++} ++EXPORT_SYMBOL_GPL(olpc_register_battery_callback); ++ ++void olpc_deregister_battery_callback(void) ++{ ++ spin_lock(&battery_callback_lock); ++ battery_callback = NULL; ++ spin_unlock(&battery_callback_lock); ++ cancel_work_sync(&sci_work); ++} ++EXPORT_SYMBOL_GPL(olpc_deregister_battery_callback); ++ ++ ++static int olpc_pm_interrupt(int irq, void *id) ++{ ++ uint32_t sts, gpe = 0; ++ ++ sts = inl(acpi_base + PM1_STS); ++ outl(sts | 0xFFFF, acpi_base + PM1_STS); ++ ++ if (olpc_get_rev() >= OLPC_REV_B2) { ++ gpe = inl(acpi_base + PM_GPE0_STS); ++ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS); ++ } ++ ++ if (sts & CS5536_PM_PWRBTN) { ++ input_report_key(pm_inputdev, KEY_POWER, 1); ++ input_sync(pm_inputdev); ++ printk(KERN_DEBUG "olpm-pm: PM_PWRBTN event received\n"); ++ /* Do we need to delay this (and hence schedule_work)? */ ++ input_report_key(pm_inputdev, KEY_POWER, 0); ++ input_sync(pm_inputdev); ++ } ++ ++ if (gpe & GPIO_WAKEUP_EC) { ++ geode_gpio_clear(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS); ++ schedule_work(&sci_work); ++ } ++ ++ if (gpe & GPIO_WAKEUP_LID) { ++ /* Disable events */ ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); ++ ++ /* Clear the edge */ ++ ++ if (olpc_lid_flag) ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); ++ else ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); ++ ++ /* Clear the status too */ ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); ++ ++ /* The line is high when the LID is open, but SW_LID ++ * should be high when the LID is closed, so we pass the old ++ * value of olpc_lid_flag ++ */ ++ ++ input_report_switch(lid_inputdev, SW_LID, olpc_lid_flag); ++ input_sync(lid_inputdev); ++ ++ /* Swap the status */ ++ olpc_lid_flag = !olpc_lid_flag; ++ ++ if (olpc_lid_flag) ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); ++ else ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); ++ ++ /* re-enable the event */ ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++/* ++ * For now, only support STR. We also don't support suspending on ++ * B1s, due to difficulties with the cafe FPGA. ++ */ ++static int olpc_pm_state_valid(suspend_state_t pm_state) ++{ ++ if (pm_state == PM_SUSPEND_MEM && olpc_rev_after(OLPC_REV_B1)) ++ return 1; ++ ++ return 0; ++} ++ ++/* This is a catchall function for operations that just don't belong ++ * anywhere else. Later we will evaluate if these belong in the ++ * individual device drivers or the firmware. ++ * If you add something to this function, please explain yourself with ++ * a comment. ++ */ ++ ++extern void gxfb_flatpanel_control(int state); ++ ++static u32 gpio_wakeup[2]; ++static u64 irq_sources[4]; ++static u64 mfgpt_irq_msr, mfgpt_nr_msr; ++ ++void olpc_fixup_wakeup(void) ++{ ++ u32 base = geode_gpio_base(); ++ int i; ++ ++ /* This clears any pending events from the status register - ++ * the firmware also does this, but its possible that it tries ++ * it too early before the key has a chance to debounce ++ */ ++ ++ outl((CS5536_PM_PWRBTN << 16) | 0xFFFF, acpi_base + PM1_STS); ++ ++ /* Enable the flatpanel sequencing as early as possible, because ++ it takes ~64ms to resume. This probably belongs in the firmware */ ++ ++ //gxfb_flatpanel_control(1); ++ ++ /* Restore the interrupt sources */ ++ wrmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]); ++ wrmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]); ++ wrmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]); ++ wrmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]); ++ ++ /* Restore the X and Y sources for GPIO */ ++ outl(gpio_wakeup[0], base + GPIO_MAP_X); ++ outl(gpio_wakeup[1], base + GPIO_MAP_Y); ++ ++ /* Resture the MFGPT MSRs */ ++ wrmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr); ++ wrmsrl(MFGPT_NR_MSR, mfgpt_nr_msr); ++ ++ for (i=0;i<2;i++) { ++ /* tell the wireless module to restart USB communication */ ++ olpc_ec_cmd(0x24, NULL, 0, NULL, 0); ++ } ++} ++ ++void olpc_fixup_sleep(void) ++{ ++ u32 base = geode_gpio_base(); ++ int i; ++ ++ /* Save the X and Y sources for GPIO */ ++ gpio_wakeup[0] = inl(base + GPIO_MAP_X); ++ gpio_wakeup[1] = inl(base + GPIO_MAP_Y); ++ ++ /* Save the Y and Z unrestricted sources */ ++ ++ rdmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]); ++ rdmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]); ++ rdmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]); ++ rdmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]); ++ ++ /* Turn off the MFGPT timers on the way down */ ++ ++ for(i = 0; i < 8; i++) { ++ u32 val = geode_mfgpt_read(i, MFGPT_REG_SETUP); ++ ++ if (val & MFGPT_SETUP_SETUP) { ++ val &= ~MFGPT_SETUP_CNTEN; ++ geode_mfgpt_write(i, MFGPT_REG_SETUP, val); ++ } ++ } ++ ++ /* Save the MFGPT MSRs */ ++ rdmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr); ++ rdmsrl(MFGPT_NR_MSR, mfgpt_nr_msr); ++ ++ if (device_may_wakeup(&olpc_powerbutton_dev.dev)) ++ olpc_wakeup_mask |= CS5536_PM_PWRBTN; ++ else ++ olpc_wakeup_mask &= ~(CS5536_PM_PWRBTN); ++ ++ if (device_may_wakeup(&olpc_lid_dev.dev)) { ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); ++ gpio_wake_events |= GPIO_WAKEUP_LID; ++ } else { ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); ++ gpio_wake_events &= ~(GPIO_WAKEUP_LID); ++ } ++} ++ ++static int olpc_pm_enter(suspend_state_t pm_state) ++{ ++ /* Only STR is supported */ ++ if (pm_state != PM_SUSPEND_MEM) ++ return -EINVAL; ++ ++ olpc_fixup_sleep(); ++ ++ /* Set the GPIO wakeup bits */ ++ outl(gpio_wake_events, acpi_base + PM_GPE0_EN); ++ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS); ++ ++ /* Save CPU state */ ++ do_olpc_suspend_lowlevel(); ++ ++ olpc_fixup_wakeup(); ++ ++ /* Restore the SCI wakeup events */ ++ outl(gpio_wake_events, acpi_base + PM_GPE0_EN); ++ ++ return 0; ++} ++ ++int asmlinkage olpc_do_sleep(u8 sleep_state) ++{ ++ void *pgd_addr = __va(read_cr3()); ++ printk(KERN_ERR "olpc_do_sleep!\n"); /* this needs to remain here so ++ * that gcc doesn't optimize ++ * away our __va! */ ++ /* FIXME: Set the SCI bits we want to wake up on here */ ++ ++ /* FIXME: Set any other SCI events that we might want here */ ++ ++ outl((olpc_wakeup_mask << 16) | 0xFFFF, acpi_base + PM1_STS); ++ ++ /* If we are in test mode, then just return (simulate a successful ++ suspend/resume). Otherwise, if we are doing the real thing, ++ then go for the gusto */ ++ ++ if (olpc_pm_mode != PM_MODE_TEST) { ++ __asm__ __volatile__("movl %0,%%eax" : : "r" (pgd_addr)); ++ __asm__("call *(%%edi); cld" ++ : : "D" (&ofw_bios_entry)); ++ } ++ ++ return 0; ++} ++ ++/* This code will slowly disappear as we fixup the issues in the BIOS */ ++ ++static void __init olpc_fixup_bios(void) ++{ ++ unsigned long hi, lo; ++ ++ if (olpc_has_vsa()) { ++ /* The VSA aggressively sets up the ACPI and PM register for ++ * trapping - its not enough to force these values in the BIOS - ++ * they seem to be changed during PCI init as well. ++ */ ++ ++ /* Change the PM registers to decode to the DD */ ++ ++ rdmsr(0x510100e2, lo, hi); ++ hi |= 0x80000000; ++ wrmsr(0x510100e2, lo, hi); ++ ++ /* Change the ACPI registers to decode to the DD */ ++ ++ rdmsr(0x510100e3, lo, hi); ++ hi |= 0x80000000; ++ wrmsr(0x510100e3, lo, hi); ++ } ++ ++ /* GPIO24 controls WORK_AUX */ ++ ++ geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_ENABLE); ++ geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_AUX1); ++ ++ if (olpc_get_rev() >= OLPC_REV_B2) { ++ /* GPIO10 is connected to the thermal alarm */ ++ geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_ENABLE); ++ geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_AUX1); ++ ++ /* Set up to get LID events */ ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_ENABLE); ++ ++ /* Clear edge detection and event enable for now */ ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); ++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); ++ ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); ++ ++ /* Set the LID to cause an PME event on group 6 */ ++ geode_gpio_event_pme(OLPC_GPIO_LID, 6); ++ ++ /* Set PME group 6 to fire the SCI interrupt */ ++ geode_gpio_set_irq(6, sci_irq); ++ } ++ ++ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_INPUT_ENABLE); ++ ++ /* Clear pending events */ ++ ++ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS); ++ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS); ++ ++ //geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_EN); ++ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE); ++ ++ /* Set the SCI to cause a PME event on group 7 */ ++ geode_gpio_event_pme(OLPC_GPIO_ECSCI, 7); ++ ++ /* And have group 6 also fire the SCI interrupt */ ++ geode_gpio_set_irq(7, sci_irq); ++} ++ ++/* This provides a control file for setting up testing of the ++ power management system. For now, there is just one setting: ++ "test" which means that we don't actually enter the power ++ off routine. ++*/ ++ ++static const char * const pm_states[] = { ++ [PM_MODE_NORMAL] = "normal", ++ [PM_MODE_TEST] = "test", ++}; ++ ++extern struct mutex pm_mutex; ++extern struct kset power_subsys; ++ ++static ssize_t control_show(struct kset *s, char *buf) ++{ ++ return sprintf(buf, "%s\n", pm_states[olpc_pm_mode]); ++} ++ ++static ssize_t control_store(struct kset *s, const char *buf, size_t n) ++{ ++ int i, len; ++ char *p; ++ ++ p = memchr(buf, '\n', n); ++ len = p ? p - buf : n; ++ ++ /* Grab the mutex */ ++ mutex_lock(&pm_mutex); ++ ++ for(i = 0; i < PM_MODE_MAX; i++) { ++ if (!strncmp(buf, pm_states[i], len)) { ++ olpc_pm_mode = i; ++ break; ++ } ++ } ++ ++ mutex_unlock(&pm_mutex); ++ ++ return (i == PM_MODE_MAX) ? -EINVAL : n; ++} ++ ++static struct subsys_attribute control_attr = { ++ .attr = { ++ .name = "olpc-pm", ++ .mode = 0644, ++ }, ++ .show = control_show, ++ .store = control_store, ++}; ++ ++static struct attribute * olpc_attributes[] = { ++ &control_attr.attr, ++ NULL ++}; ++ ++static struct attribute_group olpc_attrs = { ++ .attrs = olpc_attributes, ++}; ++ ++static int __init alloc_inputdevs(void) ++{ ++ int ret = -ENOMEM; ++ ++ pm_inputdev = input_allocate_device(); ++ if (!pm_inputdev) ++ goto err; ++ ++ pm_inputdev->name = "OLPC PM"; ++ pm_inputdev->phys = "olpc_pm/input0"; ++ set_bit(EV_KEY, pm_inputdev->evbit); ++ set_bit(KEY_POWER, pm_inputdev->keybit); ++ ++ ret = input_register_device(pm_inputdev); ++ if (ret) { ++ printk(KERN_ERR "olpc-pm: failed to register PM input device: %d\n", ret); ++ goto err; ++ } ++ ++ lid_inputdev = input_allocate_device(); ++ if (!lid_inputdev) ++ goto err; ++ ++ lid_inputdev->name = "OLPC lid switch"; ++ lid_inputdev->phys = "olpc_pm/input1"; ++ set_bit(EV_SW, lid_inputdev->evbit); ++ set_bit(SW_LID, lid_inputdev->swbit); ++ ++ ret = input_register_device(lid_inputdev); ++ if (ret) { ++ printk(KERN_ERR "olpc-pm: failed to register lid input device: %d\n", ret); ++ goto err; ++ } ++ ++ ebook_inputdev = input_allocate_device(); ++ if (!ebook_inputdev) ++ goto err; ++ ++ ebook_inputdev->name = "OLPC ebook switch"; ++ ebook_inputdev->phys = "olpc_pm/input2"; ++ set_bit(EV_SW, ebook_inputdev->evbit); ++ set_bit(SW_TABLET_MODE, ebook_inputdev->swbit); ++ ++ ret = input_register_device(ebook_inputdev); ++ if (ret) { ++ printk(KERN_ERR "olpc-pm: failed to register ebook input device: %d\n", ret); ++ goto err; ++ } ++ ++ return ret; ++err: ++ if (ebook_inputdev) { ++ input_unregister_device(ebook_inputdev); ++ ebook_inputdev = NULL; ++ } ++ if (lid_inputdev) { ++ input_unregister_device(lid_inputdev); ++ lid_inputdev = NULL; ++ } ++ if (pm_inputdev) { ++ input_unregister_device(pm_inputdev); ++ pm_inputdev = NULL; ++ } ++ ++ return ret; ++} ++ ++static int __init olpc_pm_init(void) ++{ ++ uint32_t lo, hi; ++ int ret; ++ uint8_t ec_byte; ++ ++ if (!machine_is_olpc()) ++ return -ENODEV; ++ ++ acpi_base = geode_acpi_base(); ++ pms_base = geode_pms_base(); ++ ++ if (!acpi_base || !pms_base) ++ return -ENODEV; ++ ++ ret = alloc_inputdevs(); ++ if (ret) ++ return ret; ++ ++ rdmsr(0x51400020, lo, hi); ++ sci_irq = (lo >> 20) & 15; ++ ++ if (sci_irq) { ++ printk(KERN_INFO "SCI is mapped to IRQ %d\n", sci_irq); ++ } else { ++ /* Zero doesn't mean zero -- it means masked */ ++ printk(KERN_INFO "SCI unmapped. Mapping to IRQ 3\n"); ++ sci_irq = 3; ++ lo |= 0x00300000; ++ wrmsrl(0x51400020, lo); ++ } ++ ++ olpc_fixup_bios(); ++ ++ lo = inl(pms_base + PM_FSD); ++ ++ /* Lock, enable failsafe, 4 seconds */ ++ outl(0xc001f400, pms_base + PM_FSD); ++ ++ /* Here we set up the SCI events we're interested in during ++ * real-time. We have no sleep button, and the RTC doesn't make ++ * sense, so set up the power button ++ */ ++ ++ outl(inl(acpi_base) | ((CS5536_PM_PWRBTN) << 16), acpi_base); ++ ++ if (olpc_get_rev() >= OLPC_REV_B2) { ++ gpio_wake_events |= GPIO_WAKEUP_LID; ++ ++ /* Get the current value of the GPIO, and set up the edges */ ++ olpc_lid_flag = geode_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK); ++ ++ /* Watch for the opposite edge */ ++ ++ if (olpc_lid_flag) ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); ++ else ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); ++ ++ /* Enable the event */ ++ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); ++ } ++ ++ /* Set up the mask for wakeups the EC will generate SCIs on */ ++ ++ ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &ec_byte, 1); ++ if (ret) ++ printk(KERN_ERR "Error getting the EC SCI mask: %d\n", ret); ++ ++ /* Disable battery 1% charge wakeups */ ++ ec_byte &= ~EC_SCI_SRC_BATSOC; ++ ++ ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &ec_byte, 1, NULL, 0); ++ if (ret) ++ printk(KERN_ERR "Error setting the EC SCI mask: %d\n", ret); ++ ++ /* Set up the EC SCI */ ++ ++ gpio_wake_events |= GPIO_WAKEUP_EC; ++ ++ outl(gpio_wake_events, acpi_base + PM_GPE0_EN); ++ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS); ++ ++ /* Select level triggered in PIC */ ++ ++ if (sci_irq < 8) { ++ lo = inb(0x4d0); ++ lo |= 1 << sci_irq; ++ outb(lo, 0x4d0); ++ } else { ++ lo = inb(0x4d1); ++ lo |= 1 << (sci_irq - 8); ++ outb(lo, 0x4d1); ++ } ++ /* Clear pending interrupt */ ++ outl(inl(acpi_base) | 0xFFFF, acpi_base); ++ process_sci_queue(0); /* we just want to flush the queue here */ ++ init_ebook_state(); ++ ++ /* Enable the interrupt */ ++ ++ ret = request_irq(sci_irq, &olpc_pm_interrupt, 0, "SCI", &acpi_base); ++ ++ if (ret) { ++ printk(KERN_ERR "Error registering SCI: %d\n", ret); ++ return ret; ++ } ++ ++ ofw_bios_entry.address = 0xF0000 + PAGE_OFFSET; ++ pm_set_ops(&olpc_pm_ops); ++ ++ sysfs_create_group(&power_subsys.kobj, &olpc_attrs); ++ ++ return 0; ++} ++ ++ ++#if defined (CONFIG_RTC_DRV_CMOS) || defined (CONFIG_RTC_DRV_CMOS_MODULE) ++struct resource rtc_platform_resource[2] = { ++ { ++ .flags = IORESOURCE_IO, ++ .start = RTC_PORT(0), ++ .end = RTC_PORT(0) + RTC_IO_EXTENT ++ }, ++ { ++ .flags = IORESOURCE_IRQ, ++ .start = 8, ++ .end = 8, ++ }, ++}; ++ ++ ++static void rtc_wake_on(struct device *dev) ++{ ++ olpc_wakeup_mask |= CS5536_PM_RTC; ++} ++ ++static void rtc_wake_off(struct device *dev) ++{ ++ olpc_wakeup_mask &= ~(CS5536_PM_RTC); ++} ++ ++static struct cmos_rtc_board_info rtc_info = { ++ .rtc_day_alarm = 0, ++ .rtc_mon_alarm = 0, ++ .rtc_century = 0, ++ .wake_on = rtc_wake_on, ++ .wake_off = rtc_wake_off, ++}; ++ ++struct platform_device olpc_rtc_device = { ++ .name = "rtc_cmos", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(rtc_platform_resource), ++ .dev.platform_data = &rtc_info, ++ .resource = rtc_platform_resource, ++}; ++ ++static int __init olpc_platform_init(void) ++{ ++ (void)platform_device_register(&olpc_rtc_device); ++ device_init_wakeup(&olpc_rtc_device.dev, 1); ++ ++ (void)platform_device_register(&olpc_powerbutton_dev); ++ device_init_wakeup(&olpc_powerbutton_dev.dev, 1); ++ ++ (void)platform_device_register(&olpc_lid_dev); ++ device_init_wakeup(&olpc_lid_dev.dev, 1); ++ ++ return 0; ++} ++arch_initcall(olpc_platform_init); ++#endif /* CONFIG_RTC_DRV_CMOS */ ++ ++static void olpc_pm_exit(void) ++{ ++ /* Clear any pending events, and disable them */ ++ outl(0xFFFF, acpi_base+2); ++ ++ free_irq(sci_irq, &acpi_base); ++ input_unregister_device(pm_inputdev); ++ input_unregister_device(lid_inputdev); ++ input_unregister_device(ebook_inputdev); ++} ++ ++static struct pm_ops olpc_pm_ops = { ++ .valid = olpc_pm_state_valid, ++ .enter = olpc_pm_enter, ++}; ++ ++module_init(olpc_pm_init); ++module_exit(olpc_pm_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("David Woodhouse "); ++MODULE_DESCRIPTION("AMD Geode power management for OLPC CL1"); +diff --git a/arch/i386/kernel/olpc-sleep.S b/arch/i386/kernel/olpc-sleep.S +new file mode 100644 +index 0000000..9535c9a +--- /dev/null ++++ b/arch/i386/kernel/olpc-sleep.S +@@ -0,0 +1,39 @@ ++.text ++ ++ENTRY(olpc_sleep_asm) ++olpc_sleep: ++ ;; Get the value of PM1_CNT and store it off ++ ++ add 08h, ax ++ mov bx,dx ++ in dx,eax ++ or 2000h, ax ++ mov ax,di ++ ++ ;; flush the cache ++ wbinvd ++ ++ ;; GX2 must disable refresh before going into self-refresh ++ mov 2000000180xh, ecx ++ rdmsr ++ mov eax, esi ++ and 0FF0000FFh, eax ++ wrmsr ++ ++ ;; Now, put the memory into self refresh ++ mov 2004, cx ++ xor edx, edx ++ xor eax, eax ++ mov 04h, al ++ wrmsr ++ ++ ;; Thats all she wrote - time to go to sleep ++ ++ mov bx, dx ++ movzx di, eax ++ out eax, dx ++ ++ ;; ++ ++ ++ +diff --git a/arch/i386/kernel/olpc-wakeup.S b/arch/i386/kernel/olpc-wakeup.S +new file mode 100644 +index 0000000..a92cc61 +--- /dev/null ++++ b/arch/i386/kernel/olpc-wakeup.S +@@ -0,0 +1,122 @@ ++.text ++#include ++#include ++#include ++ ++ALIGN ++ .align 4096 ++ ++wakeup_start: ++# jmp wakeup_start ++ ++ cli ++ cld ++ ++ # Clear any dangerous flags ++ ++ pushl $0 ++ popfl ++ ++ # Set up %cr3 ++ movl $swsusp_pg_dir - __PAGE_OFFSET, %eax ++ movl %eax, %cr3 ++ ++ movl saved_cr4, %eax ++ movl %eax, %cr4 ++ ++ movl saved_cr0, %eax ++ movl %eax, %cr0 ++ ++ jmp 1f ++1: ++ ljmpl $__KERNEL_CS,$wakeup_return ++ ++ ++.org 0x1000 ++ ++wakeup_return: ++ movw $__KERNEL_DS, %ax ++ movw %ax, %ss ++ movw %ax, %ds ++ movw %ax, %es ++ movw %ax, %fs ++ movw %ax, %gs ++ ++ lgdt saved_gdt ++ lidt saved_idt ++ lldt saved_ldt ++ ljmp $(__KERNEL_CS),$1f ++1: ++ movl %cr3, %eax ++ movl %eax, %cr3 ++ wbinvd ++ ++ # Go back to the return point ++ jmp ret_point ++ ++save_registers: ++ sgdt saved_gdt ++ sidt saved_idt ++ sldt saved_ldt ++ ++ pushl %edx ++ movl %cr4, %edx ++ movl %edx, saved_cr4 ++ ++ movl %cr0, %edx ++ movl %edx, saved_cr0 ++ ++ popl %edx ++ ++ ++ movl %ebx, saved_context_ebx ++ movl %ebp, saved_context_ebp ++ movl %esi, saved_context_esi ++ movl %edi, saved_context_edi ++ ++ pushfl ++ popl saved_context_eflags ++ ++ ret ++ ++ ++restore_registers: ++ movl saved_context_ebp, %ebp ++ movl saved_context_ebx, %ebx ++ movl saved_context_esi, %esi ++ movl saved_context_edi, %edi ++ ++ pushl saved_context_eflags ++ popfl ++ ++ ret ++ ++ ++ENTRY(do_olpc_suspend_lowlevel) ++ call save_processor_state ++ call save_registers ++ ++ # This is the stack context we want to remember ++ movl %esp, saved_context_esp ++ ++ pushl $3 ++ call olpc_do_sleep ++ ++ jmp wakeup_start ++ .p2align 4,,7 ++ret_point: ++ movl saved_context_esp, %esp ++ ++ call restore_registers ++ call restore_processor_state ++ ret ++ ++.data ++ALIGN ++ ++saved_gdt: .long 0,0 ++saved_idt: .long 0,0 ++saved_ldt: .long 0 ++saved_cr4: .long 0 ++saved_cr0: .long 0 ++ +diff --git a/arch/i386/kernel/olpc.c b/arch/i386/kernel/olpc.c +new file mode 100644 +index 0000000..d540cb0 +--- /dev/null ++++ b/arch/i386/kernel/olpc.c +@@ -0,0 +1,320 @@ ++/* Support for the OLPC DCON and OLPC EC access ++ * Copyright (C) 2006, Advanced Micro Devices, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++/* This is our new multi-purpose structure used to contain the ++ * information about the platform that we detect ++ */ ++ ++struct olpc_platform_t olpc_platform_info; ++EXPORT_SYMBOL_GPL(olpc_platform_info); ++ ++/********************************************************************* ++ * EC locking and access ++ *********************************************************************/ ++ ++static DEFINE_SPINLOCK(ec_lock); ++ ++/* what the timeout *should* be (in ms) */ ++#define EC_BASE_TIMEOUT 20 ++ ++/* the timeout that bugs in the EC might force us to actually use */ ++static int ec_timeout = EC_BASE_TIMEOUT; ++ ++static int __init olpc_ec_timeout_set(char *str) ++{ ++ if (get_option(&str, &ec_timeout) != 1) { ++ ec_timeout = EC_BASE_TIMEOUT; ++ printk(KERN_ERR "olpc-ec: invalid argument to " ++ "'olpc_ec_timeout=', ignoring!\n"); ++ } ++ printk(KERN_DEBUG "olpc-ec: using %d ms delay for EC commands.\n", ++ ec_timeout); ++ return 1; ++} ++__setup("olpc_ec_timeout=", olpc_ec_timeout_set); ++ ++/* ++ * These *bf_status functions return whether the buffers are full or not. ++ */ ++ ++static inline unsigned int ibf_status(unsigned int port) ++{ ++ return inb(port) & 0x02; ++} ++ ++static inline unsigned int obf_status(unsigned int port) ++{ ++ return inb(port) & 0x01; ++} ++ ++#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d)) ++static int __wait_on_ibf(unsigned int line, unsigned int port, int desired) ++{ ++ unsigned int timeo; ++ int state = ibf_status(port); ++ ++ for (timeo = ec_timeout; state != desired && timeo; timeo--) { ++ mdelay(1); ++ state = ibf_status(port); ++ } ++ ++ if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) && ++ timeo < (ec_timeout - EC_BASE_TIMEOUT)) { ++ printk(KERN_WARNING "olpc-ec: waited %u ms for IBF (%d)!\n", ++ EC_BASE_TIMEOUT-timeo, line); ++ } ++ ++ return !(state == desired); ++} ++ ++#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d)) ++static int __wait_on_obf(unsigned int line, unsigned int port, int desired) ++{ ++ unsigned int timeo; ++ int state = obf_status(port); ++ ++ for (timeo = ec_timeout; state != desired && timeo; timeo--) { ++ mdelay(1); ++ state = obf_status(port); ++ } ++ ++ if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) && ++ timeo < (ec_timeout - EC_BASE_TIMEOUT)) { ++ printk(KERN_WARNING "olpc-ec: waited %u ms for OBF (%d)!\n", ++ EC_BASE_TIMEOUT-timeo, line); ++ } ++ ++ return !(state == desired); ++} ++ ++int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, ++ unsigned char *outbuf, size_t outlen) ++{ ++ unsigned long flags; ++ int ret = -EIO; ++ int i; ++ ++ spin_lock_irqsave(&ec_lock, flags); ++ ++ if (wait_on_ibf(0x6c, 0)) { ++ printk(KERN_ERR "olpc-ec: timeout waiting for EC to " ++ "quiesce!\n"); ++ goto err; ++ } ++ ++restart: ++ /* ++ * Note that if we time out during any IBF checks, that's a failure; ++ * we have to return. There's no way for the kernel to clear that. ++ * ++ * If we time out during an OBF check, we can restart the command; ++ * reissuing it will clear the OBF flag, and we should be alright. ++ * The OBF flag will sometimes misbehave due to what we believe ++ * is a hardware quirk.. ++ */ ++ printk(KERN_DEBUG "olpc-ec: running cmd 0x%x\n", cmd); ++ outb(cmd, 0x6c); ++ ++ if (wait_on_ibf(0x6c, 0)) { ++ printk(KERN_ERR "olpc-ec: timeout waiting for EC to read " ++ "command!\n"); ++ goto err; ++ } ++ ++ if (inbuf && inlen) { ++ /* write data to EC */ ++ for (i = 0; i < inlen; i++) { ++ if (wait_on_ibf(0x6c, 0)) { ++ printk(KERN_ERR "olpc-ec: timeout waiting for" ++ " EC accept data!\n"); ++ goto err; ++ } ++ printk(KERN_DEBUG "olpc-ec: sending cmd arg 0x%x\n", ++ inbuf[i]); ++ outb(inbuf[i], 0x68); ++ } ++ } ++ if (outbuf && outlen) { ++ /* read data from EC */ ++ for (i = 0; i < outlen; i++) { ++ if (wait_on_obf(0x6c, 1)) { ++ printk(KERN_ERR "olpc-ec: timeout waiting for" ++ " EC to provide data!\n"); ++ goto restart; ++ } ++ outbuf[i] = inb(0x68); ++ printk(KERN_DEBUG "olpc-ec: received 0x%x\n", ++ outbuf[i]); ++ } ++ } ++ ++ ret = 0; ++err: ++ spin_unlock_irqrestore(&ec_lock, flags); ++ return ret; ++} ++EXPORT_SYMBOL_GPL(olpc_ec_cmd); ++ ++/********************************************************************* ++ * DCON stuff ++ *********************************************************************/ ++ ++static void olpc_power_off(void) ++{ ++ printk(KERN_INFO "OLPC power off sequence...\n"); ++ outb(0xff, 0x381); ++ outb(0x14, 0x382); ++ outb(0x01, 0x383); ++ outb(0xff, 0x381); ++ outb(0x14, 0x382); ++ outb(0x00, 0x383); ++} ++ ++static void __init ++ec_detect(void) ++{ ++ olpc_ec_cmd(0x08, NULL, 0, (unsigned char *) &olpc_platform_info.ecver, 1); ++} ++ ++/* Check to see if this version of the OLPC board has VSA built ++ * in, and set a flag ++ */ ++ ++static void __init vsa_detect(void) ++{ ++ u16 rev; ++ ++ outw(0xFC53, 0xAC1C); ++ outw(0x0003, 0xAC1C); ++ ++ rev = inw(0xAC1E); ++ ++ if (rev == 0x4132) ++ olpc_platform_info.flags |= OLPC_F_VSA; ++} ++ ++/* Map OFW revisions to what OLPC_REV_* */ ++static const char __initdata *olpc_boardrev_str[] = { ++ "A1", ++ "preB1", ++ "B1", ++ "preB2", ++ "B2", ++ "preB3", ++ "B3", ++ "B4", ++ "C1", ++ "R1", ++}; ++ ++static void __init platform_detect(char *revision, size_t len) ++{ ++ size_t propsize; ++ int i; ++ ++ BUG_ON(ARRAY_SIZE(olpc_boardrev_str) != OLPC_REV_UNKNOWN); ++ ++ if (ofw("getprop", 4, 1, NULL, "model", revision, len, &propsize)) { ++ printk(KERN_ERR "ofw: getprop call failed!\n"); ++ goto failed; ++ } ++ if (len < propsize) { ++ printk(KERN_ERR "ofw: revision string is too long!\n"); ++ goto failed; ++ } ++ ++ for (i=0; i < ARRAY_SIZE(olpc_boardrev_str); i++) { ++ if (strcmp(revision, olpc_boardrev_str[i]) == 0) { ++ olpc_platform_info.boardrev = i; ++ return; ++ } ++ } ++ ++failed: ++ strncpy(revision, "Unknown", len); ++ olpc_platform_info.boardrev = OLPC_REV_UNKNOWN; ++} ++ ++static int olpc_dcon_present = -1; ++module_param(olpc_dcon_present, int, 0444); ++ ++/* REV_A CMOS map: ++ * bit 440; DCON present bit ++ */ ++ ++#define OLPC_CMOS_DCON_OFFSET (440 / 8) ++#define OLPC_CMOS_DCON_MASK 0x01 ++ ++static int __init olpc_init(void) ++{ ++ unsigned char *romsig; ++ char revision[10]; ++ ++ spin_lock_init(&ec_lock); ++ ++ romsig = ioremap(0xffffffc0, 16); ++ ++ if (!romsig) ++ return 0; ++ ++ if (strncmp(romsig, "CL1 Q", 7)) ++ goto unmap; ++ if (strncmp(romsig+6, romsig+13, 3)) { ++ printk(KERN_INFO "OLPC BIOS signature looks invalid. Assuming not OLPC\n"); ++ goto unmap; ++ } ++ printk(KERN_INFO "OLPC board with OpenFirmware: %.16s\n", romsig); ++ ++ olpc_platform_info.flags |= OLPC_F_PRESENT; ++ ++ pm_power_off = olpc_power_off; ++ ++ /* Get the platform revision */ ++ platform_detect(revision, sizeof(revision)); ++ ++ /* If olpc_dcon_present isn't set by the command line, then ++ * "detect" it ++ */ ++ ++ if (olpc_dcon_present == -1) { ++ /* B1 and greater always has a DCON */ ++ if (olpc_platform_info.boardrev >= OLPC_REV_B1 && ++ olpc_platform_info.boardrev < OLPC_REV_UNKNOWN) ++ olpc_dcon_present = 1; ++ } ++ ++ if (olpc_dcon_present) ++ olpc_platform_info.flags |= OLPC_F_DCON; ++ ++ /* Get the EC revision */ ++ ec_detect(); ++ ++ /* Check to see if the VSA exists */ ++ vsa_detect(); ++ ++ printk(KERN_INFO "OLPC board revision: %s (EC=%x)\n", revision, ++ olpc_platform_info.ecver); ++ ++ unmap: ++ iounmap(romsig); ++ ++ return 0; ++} ++ ++postcore_initcall(olpc_init); +diff --git a/arch/i386/kernel/prom.c b/arch/i386/kernel/prom.c +new file mode 100644 +index 0000000..d64bb27 +--- /dev/null ++++ b/arch/i386/kernel/prom.c +@@ -0,0 +1,478 @@ ++/* ++ * Procedures for creating, accessing and interpreting the device tree. ++ * ++ * Paul Mackerras August 1996. ++ * Copyright (C) 1996-2005 Paul Mackerras. ++ * ++ * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. ++ * {engebret|bergner}@us.ibm.com ++ * ++ * Adapted for sparc64 by David S. Miller davem@davemloft.net ++ * ++ * Adapter for i386/OLPC by Andres Salomon ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* ++ * XXX: This is very much a stub; right now we're keeping 2 device trees ++ * in memory (one for promfs, and one here). That will not remain ++ * for long! ++ */ ++ ++static struct device_node *allnodes; ++ ++/* use when traversing tree through the allnext, child, sibling, ++ * or parent members of struct device_node. ++ */ ++static DEFINE_RWLOCK(devtree_lock); ++ ++int of_device_is_compatible(const struct device_node *device, ++ const char *compat) ++{ ++ const char* cp; ++ int cplen, l; ++ ++ cp = of_get_property(device, "compatible", &cplen); ++ if (cp == NULL) ++ return 0; ++ while (cplen > 0) { ++ if (strncmp(cp, compat, strlen(compat)) == 0) ++ return 1; ++ l = strlen(cp) + 1; ++ cp += l; ++ cplen -= l; ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(of_device_is_compatible); ++ ++struct device_node *of_get_parent(const struct device_node *node) ++{ ++ struct device_node *np; ++ ++ if (!node) ++ return NULL; ++ ++ np = node->parent; ++ ++ return np; ++} ++EXPORT_SYMBOL(of_get_parent); ++ ++struct device_node *of_get_next_child(const struct device_node *node, ++ struct device_node *prev) ++{ ++ struct device_node *next; ++ ++ next = prev ? prev->sibling : node->child; ++ for (; next != 0; next = next->sibling) { ++ break; ++ } ++ ++ return next; ++} ++EXPORT_SYMBOL(of_get_next_child); ++ ++struct device_node *of_find_node_by_path(const char *path) ++{ ++ struct device_node *np = allnodes; ++ ++ for (; np != 0; np = np->allnext) { ++ if (np->full_name != 0 && strcmp(np->full_name, path) == 0) ++ break; ++ } ++ ++ return np; ++} ++EXPORT_SYMBOL(of_find_node_by_path); ++ ++struct device_node *of_find_node_by_phandle(phandle handle) ++{ ++ struct device_node *np; ++ ++ for (np = allnodes; np != 0; np = np->allnext) ++ if (np->node == handle) ++ break; ++ ++ return np; ++} ++EXPORT_SYMBOL(of_find_node_by_phandle); ++ ++struct device_node *of_find_node_by_name(struct device_node *from, ++ const char *name) ++{ ++ struct device_node *np; ++ ++ np = from ? from->allnext : allnodes; ++ for (; np != NULL; np = np->allnext) ++ if (np->name != NULL && strcmp(np->name, name) == 0) ++ break; ++ ++ return np; ++} ++EXPORT_SYMBOL(of_find_node_by_name); ++ ++struct device_node *of_find_node_by_type(struct device_node *from, ++ const char *type) ++{ ++ struct device_node *np; ++ ++ np = from ? from->allnext : allnodes; ++ for (; np != 0; np = np->allnext) ++ if (np->type != 0 && strcmp(np->type, type) == 0) ++ break; ++ ++ return np; ++} ++EXPORT_SYMBOL(of_find_node_by_type); ++ ++struct device_node *of_find_compatible_node(struct device_node *from, ++ const char *type, const char *compatible) ++{ ++ struct device_node *np; ++ ++ np = from ? from->allnext : allnodes; ++ for (; np != 0; np = np->allnext) { ++ if (type != NULL ++ && !(np->type != 0 && strcmp(np->type, type) == 0)) ++ continue; ++ if (of_device_is_compatible(np, compatible)) ++ break; ++ } ++ ++ return np; ++} ++EXPORT_SYMBOL(of_find_compatible_node); ++ ++struct property *of_find_property(const struct device_node *np, ++ const char *name, ++ int *lenp) ++{ ++ struct property *pp; ++ ++ for (pp = np->properties; pp != 0; pp = pp->next) { ++ if (strcasecmp(pp->name, name) == 0) { ++ if (lenp != 0) ++ *lenp = pp->length; ++ break; ++ } ++ } ++ return pp; ++} ++EXPORT_SYMBOL(of_find_property); ++ ++/* ++ * Find a property with a given name for a given node ++ * and return the value. ++ */ ++const void *of_get_property(const struct device_node *np, const char *name, ++ int *lenp) ++{ ++ struct property *pp = of_find_property(np,name,lenp); ++ return pp ? pp->value : NULL; ++} ++EXPORT_SYMBOL(of_get_property); ++ ++int of_getintprop_default(struct device_node *np, const char *name, int def) ++{ ++ struct property *prop; ++ int len; ++ ++ prop = of_find_property(np, name, &len); ++ if (!prop || len != 4) ++ return def; ++ ++ return *(int *) prop->value; ++} ++EXPORT_SYMBOL(of_getintprop_default); ++ ++int of_n_addr_cells(struct device_node *np) ++{ ++ const int* ip; ++ do { ++ if (np->parent) ++ np = np->parent; ++ ip = of_get_property(np, "#address-cells", NULL); ++ if (ip != NULL) ++ return *ip; ++ } while (np->parent); ++ /* No #address-cells property for the root node, default to 2 */ ++ return 2; ++} ++EXPORT_SYMBOL(of_n_addr_cells); ++ ++int of_n_size_cells(struct device_node *np) ++{ ++ const int* ip; ++ do { ++ if (np->parent) ++ np = np->parent; ++ ip = of_get_property(np, "#size-cells", NULL); ++ if (ip != NULL) ++ return *ip; ++ } while (np->parent); ++ /* No #size-cells property for the root node, default to 1 */ ++ return 1; ++} ++EXPORT_SYMBOL(of_n_size_cells); ++ ++int of_set_property(struct device_node *dp, const char *name, void *val, int len) ++{ ++ return -EIO; ++} ++EXPORT_SYMBOL(of_set_property); ++ ++static unsigned int prom_early_allocated; ++ ++static void * __init prom_early_alloc(unsigned long size) ++{ ++ void *ret; ++ ++ ret = kmalloc(size, GFP_KERNEL); ++ if (ret != NULL) ++ memset(ret, 0, size); ++ else ++ printk(KERN_ERR "ACK! couldn't allocate prom memory!\n"); ++ ++ prom_early_allocated += size; ++ ++ return ret; ++} ++ ++static int is_root_node(const struct device_node *dp) ++{ ++ if (!dp) ++ return 0; ++ ++ return (dp->parent == NULL); ++} ++ ++static char * __init build_path_component(struct device_node *dp) ++{ ++ int pathlen; ++ char *n, *i; ++ ++ if (ofw("package-to-path", 3, 1, dp->node, NULL, 0, &pathlen)) { ++ printk(KERN_ERR "PROM: unable to get path name from OFW!\n"); ++ return "ERROR"; ++ } ++ n = prom_early_alloc(pathlen + 1); ++ if (ofw("package-to-path", 3, 1, dp->node, n, pathlen+1, &pathlen)) ++ printk(KERN_ERR "PROM: unable to get path name from OFW\n"); ++ ++ if ((i = strrchr(n, '/'))) ++ n = ++i; /* we only want the file name */ ++ return n; ++} ++ ++static char * __init build_full_name(struct device_node *dp) ++{ ++ int len, ourlen, plen; ++ char *n; ++ ++ plen = strlen(dp->parent->full_name); ++ ourlen = strlen(dp->path_component_name); ++ len = ourlen + plen + 2; ++ ++ n = prom_early_alloc(len); ++ strcpy(n, dp->parent->full_name); ++ if (!is_root_node(dp->parent)) { ++ strcpy(n + plen, "/"); ++ plen++; ++ } ++ strcpy(n + plen, dp->path_component_name); ++ ++ return n; ++} ++ ++static struct property * __init build_one_prop(phandle node, char *prev, char *special_name, void *special_val, int special_len) ++{ ++ static struct property *tmp = NULL; ++ struct property *p; ++ ++ if (tmp) { ++ p = tmp; ++ memset(p, 0, sizeof(*p) + 32); ++ tmp = NULL; ++ } else { ++ p = prom_early_alloc(sizeof(struct property) + 32); ++ } ++ ++ p->name = (char *) (p + 1); ++ if (special_name) { ++ strcpy(p->name, special_name); ++ p->length = special_len; ++ p->value = prom_early_alloc(special_len); ++ memcpy(p->value, special_val, special_len); ++ } else { ++ int fl; ++ if (prev == NULL) { ++ if (ofw("nextprop", 3, 1, node, "", p->name, &fl)) { ++ printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__); ++ return NULL; ++ } ++ } else { ++ if (ofw("nextprop", 3, 1, node, prev, p->name, &fl)) { ++ printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__); ++ return NULL; ++ } ++ } ++ if (strlen(p->name) == 0 || fl != 1) { ++ tmp = p; ++ return NULL; ++ } ++ if (ofw("getproplen", 2, 1, node, p->name, &p->length)) { ++ printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__); ++ return NULL; ++ } ++ if (p->length <= 0) { ++ p->length = 0; ++ } else { ++ p->value = prom_early_alloc(p->length + 1); ++ if (ofw("getprop", 4, 1, node, p->name, p->value, p->length, &p->length)) { ++ printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__); ++ return NULL; ++ } ++ ((unsigned char *)p->value)[p->length] = '\0'; ++ } ++ } ++ return p; ++} ++ ++static struct property * __init build_prop_list(phandle node) ++{ ++ struct property *head, *tail; ++ ++ head = tail = build_one_prop(node, NULL, ++ ".node", &node, sizeof(node)); ++ ++ tail->next = build_one_prop(node, NULL, NULL, NULL, 0); ++ tail = tail->next; ++ while(tail) { ++ tail->next = build_one_prop(node, tail->name, ++ NULL, NULL, 0); ++ tail = tail->next; ++ } ++ ++ return head; ++} ++ ++static char * __init get_one_property(phandle node, const char *name) ++{ ++ char *buf = ""; ++ int len; ++ ++ if (ofw("getproplen", 2, 1, node, name, &len)) { ++ printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__); ++ return NULL; ++ } ++ if (len > 0) { ++ buf = prom_early_alloc(len); ++ if (ofw("getprop", 4, 1, node, name, buf, len, &len)) { ++ printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__); ++ return NULL; ++ } ++ } ++ ++ return buf; ++} ++ ++static struct device_node * __init create_node(phandle node, struct device_node *parent) ++{ ++ struct device_node *dp; ++ ++ if (!node) ++ return NULL; ++ ++ dp = prom_early_alloc(sizeof(*dp)); ++ dp->parent = parent; ++ ++ kref_init(&dp->kref); ++ ++ dp->name = get_one_property(node, "name"); ++ dp->type = get_one_property(node, "device_type"); ++ dp->node = node; ++ ++ dp->properties = build_prop_list(node); ++ ++ return dp; ++} ++ ++static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp) ++{ ++ struct device_node *ret = NULL, *prev_sibling = NULL; ++ struct device_node *dp; ++ u32 child; ++ ++ while (1) { ++ dp = create_node(node, parent); ++ if (!dp) ++ break; ++ ++ if (prev_sibling) ++ prev_sibling->sibling = dp; ++ ++ if (!ret) ++ ret = dp; ++ prev_sibling = dp; ++ ++ *(*nextp) = dp; ++ *nextp = &dp->allnext; ++ ++ dp->path_component_name = build_path_component(dp); ++ dp->full_name = build_full_name(dp); ++ ++ if (ofw("child", 1, 1, node, &child)) { ++ printk(KERN_ERR "PROM: %s: fetching child failed!\n", __func__); ++ return NULL; ++ } ++ dp->child = build_tree(dp, child, nextp); ++ ++ if (ofw("peer", 1, 1, node, &node)) { ++ printk(KERN_ERR "PROM: %s: fetching peer failed!\n", __func__); ++ return NULL; ++ } ++ } ++ ++ return ret; ++} ++ ++static phandle root_node; ++ ++void __init prom_build_devicetree(void) ++{ ++ struct device_node **nextp; ++ u32 child; ++ ++ if (ofw("peer", 1, 1, 0, &root_node)) { ++ printk(KERN_ERR "PROM: unable to get root node from OFW!\n"); ++ return; ++ } ++ ++ allnodes = create_node(root_node, NULL); ++ allnodes->path_component_name = ""; ++ allnodes->full_name = "/"; ++ ++ nextp = &allnodes->allnext; ++ if (ofw("child", 1, 1, allnodes->node, &child)) { ++ printk(KERN_ERR "PROM: unable to get child node from OFW!\n"); ++ return; ++ } ++ allnodes->child = build_tree(allnodes, child, &nextp); ++ printk("PROM: Built device tree with %u bytes of memory.\n", ++ prom_early_allocated); ++} +diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c +index d474cd6..c4b26ba 100644 +--- a/arch/i386/kernel/setup.c ++++ b/arch/i386/kernel/setup.c +@@ -362,8 +362,10 @@ void __init zone_sizes_init(void) + { + unsigned long max_zone_pfns[MAX_NR_ZONES]; + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); ++#ifdef CONFIG_ZONE_DMA + max_zone_pfns[ZONE_DMA] = + virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; ++#endif + max_zone_pfns[ZONE_NORMAL] = max_low_pfn; + #ifdef CONFIG_HIGHMEM + max_zone_pfns[ZONE_HIGHMEM] = highend_pfn; +@@ -428,6 +430,9 @@ void __init setup_bootmem_allocator(void) + */ + acpi_reserve_bootmem(); + #endif ++#ifdef CONFIG_OLPC_PM ++ reserve_bootmem(0xf0000, PAGE_SIZE); ++#endif + #ifdef CONFIG_X86_FIND_SMP_CONFIG + /* + * Find and reserve possible boot-time SMP configuration: +diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile +index 44650e0..1250a7b 100644 +--- a/arch/i386/pci/Makefile ++++ b/arch/i386/pci/Makefile +@@ -3,6 +3,7 @@ obj-y := i386.o init.o + obj-$(CONFIG_PCI_BIOS) += pcbios.o + obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o + obj-$(CONFIG_PCI_DIRECT) += direct.o ++obj-$(CONFIG_PCI_OLPC) += olpc.o + + pci-y := fixup.o + pci-$(CONFIG_ACPI) += acpi.o +diff --git a/arch/i386/pci/init.c b/arch/i386/pci/init.c +index 3de9f9b..0f5f7dd 100644 +--- a/arch/i386/pci/init.c ++++ b/arch/i386/pci/init.c +@@ -14,6 +14,9 @@ static __init int pci_access_init(void) + #ifdef CONFIG_PCI_MMCONFIG + pci_mmcfg_init(type); + #endif ++#ifdef CONFIG_PCI_OLPC ++ pci_olpc_init(); ++#endif + if (raw_pci_ops) + return 0; + #ifdef CONFIG_PCI_BIOS +diff --git a/arch/i386/pci/olpc.c b/arch/i386/pci/olpc.c +new file mode 100644 +index 0000000..1518d25 +--- /dev/null ++++ b/arch/i386/pci/olpc.c +@@ -0,0 +1,298 @@ ++/* ++ * olpcpci.c - Low-level PCI config space access for OLPC systems ++ * without the VSA PCI virtualization software. ++ * ++ * The AMD Geode chipset (GX2 processor, cs5536 I/O companion device) ++ * has some I/O functions (display, southbridge, sound, USB HCIs, etc) ++ * that more or less behave like PCI devices, but the hardware doesn't ++ * directly implement the PCI configuration space headers. AMD provides ++ * "VSA" (Virtual System Architecture) software that emulates PCI config ++ * space for these devices, by trapping I/O accesses to PCI config register ++ * (CF8/CFC) and running some code in System Management Mode interrupt state. ++ * On the OLPC platform, we don't want to use that VSA code because ++ * (a) it slows down suspend/resume, and (b) recompiling it requires special ++ * compilers that are hard to get. So instead of letting the complex VSA ++ * code simulate the PCI config registers for the on-chip devices, we ++ * just simulate them the easy way, by inserting the code into the ++ * pci_write_config and pci_read_config path. Most of the config registers ++ * are read-only anyway, so the bulk of the simulation is just table lookup. ++ */ ++ ++#include ++#include ++#include ++#include ++#include "pci.h" ++ ++static int is_lx; ++ ++/* ++ * In the tables below, the first two line (8 longwords) are the ++ * size masks that are used when the higher level PCI code determines ++ * the size of the region by writing ~0 to a base address register ++ * and reading back the result. ++ * ++ * The following lines are the values that are read during normal ++ * PCI config access cycles, i.e. not after just having written ++ * ~0 to a base address register. ++ */ ++ ++static const u32 lxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x281022 , 0x2200005 , 0x6000021 , 0x80f808 , /* AMD Vendor ID */ ++ 0x0 , 0x0 , 0x0 , 0x0 , /* No virtual registers, hence no BAR for them */ ++ 0x0 , 0x0 , 0x0 , 0x28100b , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 gxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */ ++ 0xfffffffd , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x28100b , 0x2200005 , 0x6000021 , 0x80f808 , /* NSC Vendor ID */ ++ 0xac1d , 0x0 , 0x0 , 0x0 , /* I/O BAR - base of virtual registers */ ++ 0x0 , 0x0 , 0x0 , 0x28100b , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 lxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ ++ 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x20811022 , 0x2200003 , 0x3000000 , 0x0 , /* AMD Vendor ID */ ++ 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */ ++ 0xfe00c000 , 0x0 , 0x0 , 0x30100b , /* VIP */ ++ 0x0 , 0x0 , 0x0 , 0x10e , /* INTA, IRQ14 for graphics accel */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 gxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */ ++ 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x30100b , 0x2200003 , 0x3000000 , 0x0 , /* NSC Vendor ID */ ++ 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */ ++ 0x0 , 0x0 , 0x0 , 0x30100b , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 aes_hdr[] = { /* dev 1 function 2 - devfn = 0xa */ ++ 0xffffc000 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x20821022 , 0x2a00006 , 0x10100000 , 0x8 , /* NSC Vendor ID */ ++ 0xfe010000 , 0x0 , 0x0 , 0x0 , /* AES registers */ ++ 0x0 , 0x0 , 0x0 , 0x20821022 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++ ++static const u32 isa_hdr[] = { /* dev f function 0 - devfn = 78 */ ++ 0xfffffff9 , 0xffffff01 , 0xffffffc1 , 0xffffffe1 , ++ 0xffffff81 , 0xffffffc1 , 0x0 , 0x0 , ++ ++ 0x20901022 , 0x2a00049 , 0x6010003 , 0x802000 , ++ 0x18b1 , 0x1001 , 0x1801 , 0x1881 , /* SMB-8 GPIO-256 MFGPT-64 IRQ-32 */ ++ 0x1401 , 0x1841 , 0x0 , 0x20901022 , /* PMS-128 ACPI-64 */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0xaa5b , /* interrupt steering */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 ac97_hdr[] = { /* dev f function 3 - devfn = 7b */ ++ 0xffffff81 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x20931022 , 0x2a00041 , 0x4010001 , 0x0 , ++ 0x1481 , 0x0 , 0x0 , 0x0 , /* I/O BAR-128 */ ++ 0x0 , 0x0 , 0x0 , 0x20931022 , ++ 0x0 , 0x0 , 0x0 , 0x205 , /* IntB , IRQ5 */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 ohci_hdr[] = { /* dev f function 4 - devfn = 7c */ ++ 0xfffff000 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x20941022 , 0x2300006 , 0xc031002 , 0x0 , ++ 0xfe01a000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */ ++ 0x0 , 0x0 , 0x0 , 0x20941022 , ++ 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */ ++ 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */ ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++}; ++ ++static const u32 ehci_hdr[] = { /* dev f function 4 - devfn = 7d */ ++ 0xfffff000 , 0x0 , 0x0 , 0x0 , ++ 0x0 , 0x0 , 0x0 , 0x0 , ++ ++ 0x20951022 , 0x2300006 , 0xc032002 , 0x0 , ++ 0xfe01b000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */ ++ 0x0 , 0x0 , 0x0 , 0x20951022 , ++ 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */ ++ 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */ ++#if 0 ++ 0x1 , 0x40080000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */ ++#endif ++ 0x01000001 , 0x00000000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */ ++ 0x2020 , 0x0 , 0x0 , 0x0 , /* (EHCI page 8) 60 SBRN (R/O), 61 FLADJ (R/W), PORTWAKECAP */ ++}; ++ ++static u32 ff_loc = ~0; ++static u32 zero_loc = 0; ++ ++static int bar_probing = 0; /* Set after a write of ~0 to a BAR */ ++ ++#define NB_SLOT 0x1 /* Northbridge - GX chip - Device 1 */ ++#define SB_SLOT 0xf /* Southbridge - CS5536 chip - Device F */ ++#define SIMULATED(bus, devfn) (((bus) == 0) && ((PCI_SLOT(devfn) == NB_SLOT) || (PCI_SLOT(devfn) == SB_SLOT))) ++ ++static u32 *hdr_addr(const u32 *hdr, int reg) ++{ ++ u32 addr; ++ ++ /* ++ * This is a little bit tricky. The header maps consist of ++ * 0x20 bytes of size masks, followed by 0x70 bytes of header data. ++ * In the normal case, when not probing a BAR's size, we want ++ * to access the header data, so we add 0x20 to the reg offset, ++ * thus skipping the size mask area. ++ * In the BAR probing case, we want to access the size mask for ++ * the BAR, so we subtract 0x10 (the config header offset for ++ * BAR0), and don't skip the size mask area. ++ */ ++ ++ addr = (u32)hdr + reg + (bar_probing ? -0x10 : 0x20); ++ ++ bar_probing = 0; ++ return (u32 *)addr; ++} ++ ++static int pci_olpc_read(unsigned int seg, unsigned int bus, ++ unsigned int devfn, int reg, int len, u32 *value) ++{ ++ u32 *addr; ++ ++ /* Use the hardware mechanism for non-simulated devices */ ++ if (!SIMULATED(bus, devfn)) ++ return pci_conf1_read(seg, bus, devfn, reg, len, value); ++ ++ /* ++ * No device has config registers past 0x70, so we save table space ++ * by not storing entries for the nonexistent registers ++ */ ++ if (reg >= 0x70) ++ addr = &zero_loc; ++ else { ++ switch (devfn) { ++ case 0x8: ++ addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg); ++ break; ++ case 0x9: ++ addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg); ++ break; ++ case 0xa: ++ addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc; ++ break; ++ case 0x78: ++ addr = hdr_addr(isa_hdr, reg); ++ break; ++ case 0x7b: ++ addr = hdr_addr(ac97_hdr, reg); ++ break; ++ case 0x7c: ++ addr = hdr_addr(ohci_hdr, reg); ++ break; ++ case 0x7d: ++ addr = hdr_addr(ehci_hdr, reg); ++ break; ++ default: ++ addr = &ff_loc; ++ break; ++ } ++ } ++ switch (len) { ++ case 1: ++ *value = *(u8 *) addr; ++ break; ++ case 2: ++ *value = *(u16 *) addr; ++ break; ++ case 4: ++ *value = *addr; ++ break; ++ default: ++ BUG(); ++ } ++ ++ return 0; ++} ++ ++static int pci_olpc_write(unsigned int seg, unsigned int bus, ++ unsigned int devfn, int reg, int len, u32 value) ++{ ++ /* Use the hardware mechanism for non-simulated devices */ ++ if (!SIMULATED(bus, devfn)) ++ return pci_conf1_write(seg, bus, devfn, reg, len, value); ++ ++ /* XXX we may want to extend this to simulate EHCI power management */ ++ ++ /* ++ * Mostly we just discard writes, but if the write is a size probe ++ * (i.e. writing ~0 to a BAR), we remember it and arrange to return ++ * the appropriate size mask on the next read. This is cheating ++ * to some extent, because it depends on the fact that the next ++ * access after such a write will always be a read to the same BAR. ++ */ ++ ++ if ((reg >= 0x10) && (reg < 0x2c)) { ++ /* Write is to a BAR */ ++ if (value == ~0) ++ bar_probing = 1; ++ } else { ++ /* ++ * No warning on writes to ROM BAR, CMD, LATENCY_TIMER, ++ * CACHE_LINE_SIZE, or PM registers. ++ */ ++ if ((reg != 0x30) && (reg != 0x04) && (reg != 0x0d) && ++ (reg != 0x0c) && (reg != 0x44)) ++ printk(KERN_WARNING "OLPC PCI: Config write to devfn %x reg %x value %x\n", devfn, reg, value); ++ } ++ ++ return 0; ++} ++ ++static struct pci_raw_ops pci_olpc_conf = { ++ .read = pci_olpc_read, ++ .write = pci_olpc_write, ++}; ++ ++void __init pci_olpc_init(void) ++{ ++ if (!machine_is_olpc() || olpc_has_vsa()) ++ return; ++ ++ printk(KERN_INFO "PCI: Using configuration type OLPC\n"); ++ raw_pci_ops = &pci_olpc_conf; ++ is_lx = is_geode_lx(); ++} +diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h +index 8c66f27..a67e617 100644 +--- a/arch/i386/pci/pci.h ++++ b/arch/i386/pci/pci.h +@@ -93,6 +93,7 @@ extern void pci_direct_init(int type); + extern void pci_pcbios_init(void); + extern void pci_mmcfg_init(int type); + extern void pcibios_sort(void); ++extern void pci_olpc_init(void); + + /* pci-mmconfig.c */ + +diff --git a/drivers/Makefile b/drivers/Makefile +index f0878b2..c033d30 100644 +--- a/drivers/Makefile ++++ b/drivers/Makefile +@@ -23,6 +23,8 @@ obj-y += char/ + + obj-$(CONFIG_CONNECTOR) += connector/ + ++obj-$(CONFIG_SYSPROF) += sysprof/ ++ + # i810fb and intelfb depend on char/agp/ + obj-$(CONFIG_FB_I810) += video/i810/ + obj-$(CONFIG_FB_INTEL) += video/intelfb/ +diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c +index c6f6f42..55ae42c 100644 +--- a/drivers/char/vt_ioctl.c ++++ b/drivers/char/vt_ioctl.c +@@ -37,6 +37,9 @@ + char vt_dont_switch; + extern struct tty_driver *console_driver; + ++/* Add a notifier chain to inform drivers of a VT_TEXT/VT_GRAPHICS switch */ ++RAW_NOTIFIER_HEAD(console_notifier_list); ++ + #define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count) + #define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons) + +@@ -491,6 +494,14 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, + vc->vc_mode = (unsigned char) arg; + if (console != fg_console) + return 0; ++ ++ /* Notify listeners if the current fg_console has switched */ ++ ++ raw_notifier_call_chain(&console_notifier_list, ++ (arg == KD_TEXT) ? ++ CONSOLE_EVENT_SWITCH_TEXT : ++ CONSOLE_EVENT_SWITCH_GRAPHICS, 0); ++ + /* + * explicitly blank/unblank the screen if switching modes + */ +diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c +index e6c4a2b..874d623 100644 +--- a/drivers/i2c/busses/scx200_acb.c ++++ b/drivers/i2c/busses/scx200_acb.c +@@ -46,6 +46,10 @@ static int base[MAX_DEVICES] = { 0x820, 0x840 }; + module_param_array(base, int, NULL, 0); + MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers"); + ++static unsigned int smbclk = 0x70; ++module_param(smbclk, uint, 0); ++MODULE_PARM_DESC(smbclk, "Specify the SMB_CLK value"); ++ + #define POLL_TIMEOUT (HZ/5) + + enum scx200_acb_state { +@@ -108,6 +112,7 @@ struct scx200_acb_iface { + #define ACBADDR (iface->base + 4) + #define ACBCTL2 (iface->base + 5) + #define ACBCTL2_ENABLE 0x01 ++#define ACBCTL3 (iface->base + 6) + + /************************************************************************/ + +@@ -392,11 +397,13 @@ static __init int scx200_acb_probe(struct scx200_acb_iface *iface) + { + u8 val; + +- /* Disable the ACCESS.bus device and Configure the SCL +- frequency: 16 clock cycles */ +- outb(0x70, ACBCTL2); ++ /* Disable the ACCESS.bus device and Configure the SCL */ ++ ++ outb((smbclk & 0x7F) << 1, ACBCTL2); ++ ++ outb((smbclk >> 7) & 0xFF, ACBCTL3); + +- if (inb(ACBCTL2) != 0x70) { ++ if (inb(ACBCTL2) != ((smbclk & 0x7F) << 1)) { + pr_debug(NAME ": ACBCTL2 readback failed\n"); + return -ENXIO; + } +diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c +index 41fc3d0..a15e7a9 100644 +--- a/drivers/input/keyboard/atkbd.c ++++ b/drivers/input/keyboard/atkbd.c +@@ -63,12 +63,25 @@ static int atkbd_extra; + module_param_named(extra, atkbd_extra, bool, 0); + MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards"); + ++#define ATKBD_KEY_UNKNOWN 0 ++#define ATKBD_KEY_NULL 0xFF0000FF ++ ++#define ATKBD_SCR_1 0xFF0000FE ++#define ATKBD_SCR_2 0xFF0000FD ++#define ATKBD_SCR_4 0xFF0000FC ++#define ATKBD_SCR_8 0xFF0000FB ++#define ATKBD_SCR_CLICK 0xFF0000FA ++#define ATKBD_SCR_LEFT 0xFF0000F9 ++#define ATKBD_SCR_RIGHT 0xFF0000F8 ++ ++#define ATKBD_SPECIAL 0xFF0000F8 ++ + /* + * Scancode to keycode tables. These are just the default setting, and + * are loadable via an userland utility. + */ + +-static unsigned char atkbd_set2_keycode[512] = { ++static unsigned int atkbd_set2_keycode[512] = { + + #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES + +@@ -87,11 +100,17 @@ static unsigned char atkbd_set2_keycode[512] = { + 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99, + + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, +- 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125, ++ ++ 217,100,ATKBD_KEY_NULL, 0, 97,165, 0, 0, ++ 156, 0, 0, 0, 0, 0, 0,125, ++ + 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127, + 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142, + 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0, +- 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0, ++ ++ 226, 0, 0, 0, 0, 0, 0, 0, ++ 0,ATKBD_KEY_NULL, 96, 0, 0, 0,143, 0, ++ + 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112, + 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0, + +@@ -150,19 +169,6 @@ static unsigned char atkbd_unxlate_table[128] = { + #define ATKBD_RET_HANGEUL 0xf2 + #define ATKBD_RET_ERR 0xff + +-#define ATKBD_KEY_UNKNOWN 0 +-#define ATKBD_KEY_NULL 255 +- +-#define ATKBD_SCR_1 254 +-#define ATKBD_SCR_2 253 +-#define ATKBD_SCR_4 252 +-#define ATKBD_SCR_8 251 +-#define ATKBD_SCR_CLICK 250 +-#define ATKBD_SCR_LEFT 249 +-#define ATKBD_SCR_RIGHT 248 +- +-#define ATKBD_SPECIAL 248 +- + #define ATKBD_LED_EVENT_BIT 0 + #define ATKBD_REP_EVENT_BIT 1 + +@@ -174,7 +180,7 @@ static unsigned char atkbd_unxlate_table[128] = { + #define ATKBD_XL_HANJA 0x20 + + static struct { +- unsigned char keycode; ++ unsigned int keycode; + unsigned char set2; + } atkbd_scroll_keys[] = { + { ATKBD_SCR_1, 0xc5 }, +@@ -200,7 +206,7 @@ struct atkbd { + char phys[32]; + + unsigned short id; +- unsigned char keycode[512]; ++ unsigned int keycode[512]; + unsigned char set; + unsigned char translated; + unsigned char extra; +@@ -351,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, + unsigned int code = data; + int scroll = 0, hscroll = 0, click = -1, add_release_event = 0; + int value; +- unsigned char keycode; ++ unsigned int keycode; + + #ifdef ATKBD_DEBUG + printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags); +@@ -856,9 +862,11 @@ static void atkbd_set_keycode_table(struct atkbd *atkbd) + atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode; + } + } else if (atkbd->set == 3) { +- memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode)); ++ for (i = 0; i < ARRAY_SIZE(atkbd_set3_keycode); i++) ++ atkbd->keycode[i] = atkbd_set3_keycode[i]; + } else { +- memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode)); ++ for (i = 0; i < ARRAY_SIZE(atkbd_set2_keycode); i++) ++ atkbd->keycode[i] = atkbd_set2_keycode[i]; + + if (atkbd->scroll) + for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) +@@ -925,8 +933,8 @@ static void atkbd_set_device_attrs(struct atkbd *atkbd) + } + + input_dev->keycode = atkbd->keycode; +- input_dev->keycodesize = sizeof(unsigned char); +- input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode); ++ input_dev->keycodesize = sizeof(unsigned int); ++ input_dev->keycodemax = ARRAY_SIZE(atkbd->keycode); + + for (i = 0; i < 512; i++) + if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL) +@@ -1017,6 +1025,10 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) + return err; + } + ++#ifdef CONFIG_OLPC ++#include ++#endif ++ + /* + * atkbd_reconnect() tries to restore keyboard into a sane state and is + * most likely called on resume. +@@ -1027,6 +1039,12 @@ static int atkbd_reconnect(struct serio *serio) + struct atkbd *atkbd = serio_get_drvdata(serio); + struct serio_driver *drv = serio->drv; + ++#ifdef CONFIG_OLPC ++ if (olpc_rev_after(OLPC_REV_B2)) ++ if (serio->dev.power.power_state.event != PM_EVENT_ON) ++ return 0; ++#endif ++ + if (!atkbd || !drv) { + printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n"); + return -1; +diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig +index 7bbea09..6febbc5 100644 +--- a/drivers/input/mouse/Kconfig ++++ b/drivers/input/mouse/Kconfig +@@ -96,6 +96,16 @@ config MOUSE_PS2_TOUCHKIT + + If unsure, say N. + ++config MOUSE_PS2_OLPC ++ bool "OLPC PS/2 mouse protocol extension" if EMBEDDED ++ default n ++ depends on MOUSE_PS2 && OLPC ++ ---help--- ++ Say Y here if you have an OLPC PS/2 touchpad connected to ++ your system. ++ ++ If unsure, say N. ++ + config MOUSE_SERIAL + tristate "Serial mouse" + select SERIO +diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile +index 9e6e363..f4654ce 100644 +--- a/drivers/input/mouse/Makefile ++++ b/drivers/input/mouse/Makefile +@@ -24,3 +24,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) += logips2pp.o + psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o + psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o + psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o ++psmouse-$(CONFIG_MOUSE_PS2_OLPC) += olpc.o +diff --git a/drivers/input/mouse/olpc.c b/drivers/input/mouse/olpc.c +new file mode 100644 +index 0000000..dc575ac +--- /dev/null ++++ b/drivers/input/mouse/olpc.c +@@ -0,0 +1,554 @@ ++/* ++ * OLPC touchpad PS/2 mouse driver ++ * ++ * Copyright (c) 2006 One Laptop Per Child, inc. ++ * Authors Zephaniah E. Hull and Andres Salomon ++ * ++ * This driver is partly based on the ALPS driver, which is: ++ * ++ * Copyright (c) 2003 Neil Brown ++ * Copyright (c) 2003-2005 Peter Osterlund ++ * Copyright (c) 2004 Dmitry Torokhov ++ * Copyright (c) 2005 Vojtech Pavlik ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++/* ++ * The touchpad on the OLPC is fairly wide, with the entire area usable ++ * as a tablet ("PT mode"), and the center 1/3rd also usable as a touchpad ++ * ("GS mode"). ++ * ++ * Earlier version of the device had simultaneous reporting; however, that ++ * was removed. Instead, the device now reports packets in one mode, and ++ * tells the driver when a mode switch needs to happen. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "psmouse.h" ++#include "olpc.h" ++ ++static int tpdebug; ++module_param(tpdebug, int, 0644); ++ ++#define OLPC_GS 1 /* The GS sensor. */ ++#define OLPC_PT 2 /* The PT sensor. */ ++ ++static struct olpc_model_info olpc_model_data[] = { ++ { { 0x67, 0x00, 0x00 }, OLPC_GS | OLPC_PT }, /* unknown ID */ ++ { { 0x67, 0x00, 0x0a }, OLPC_GS | OLPC_PT }, /* pre-B1 */ ++ { { 0x67, 0x00, 0x14 }, OLPC_GS }, /* B1.*/ ++ { { 0x67, 0x00, 0x28 }, OLPC_GS | OLPC_PT }, /* B2 */ ++ { { 0x67, 0x00, 0x3c }, OLPC_GS | OLPC_PT }, /* B2-2 */ ++ { { 0x67, 0x00, 0x50 }, OLPC_GS | OLPC_PT }, /* C1 */ ++}; ++ ++#define OLPC_PKT_PT 0xcf ++#define OLPC_PKT_GS 0xff ++ ++static int olpc_absolute_mode(struct psmouse *psmouse, int mode); ++ ++/* ++ * OLPC absolute Mode - single-mode format ++ * ++ * byte 0: 1 1 0 0 1 1 1 1 ++ * byte 1: 0 x6 x5 x4 x3 x2 x1 x0 ++ * byte 2(PT): 0 0 x9 x8 x7 ? pt-dsw gs-dsw ++ * byte 2(GS): 0 x10 x9 x8 x7 ? gs-dsw pt-dsw ++ * byte 3: 0 y9 y8 y7 1 0 swr swl ++ * byte 4: 0 y6 y5 y4 y3 y2 y1 y0 ++ * byte 5: 0 z6 z5 z4 z3 z2 z1 z0 ++ * ++ * ?'s are not defined in the protocol spec, may vary between models. ++ * ++ * swr/swl are the left/right buttons. ++ * ++ * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a ++ * pen/finger ++ */ ++ ++static void olpc_process_packet_gspt(struct psmouse *psmouse) ++{ ++ struct olpc_data *priv = psmouse->private; ++ unsigned char *packet = psmouse->packet; ++ struct input_dev *dev = psmouse->dev; ++ struct input_dev *dev2 = priv->dev2; ++ int x, y, z, gs_down = 0, pt_down = 0, left, right; ++ struct timeval now_tv; ++ s64 now_ns; ++ ++ left = packet[3] & 1; ++ right = packet[3] & 2; ++ x = packet[1] | ((packet[2] & 0x78) << 4); ++ y = packet[4] | ((packet[3] & 0x70) << 3); ++ z = packet[5]; ++ ++ if (psmouse->packet[0] == OLPC_PKT_GS) { ++ pt_down = !!(packet[2] & 1); ++ gs_down = !!(packet[2] & 2); ++ } else if (psmouse->packet[0] == OLPC_PKT_PT) { ++ gs_down = !!(packet[2] & 1); ++ pt_down = !!(packet[2] & 2); ++ } ++ ++ /* ++ * XXX: Kludge. ++ * If it's been more than 30ms since the last packet, ++ * assume that there was a lift we were never told about. ++ */ ++ do_gettimeofday(&now_tv); ++ now_ns = timeval_to_ns (&now_tv); ++ if (now_ns >= priv->late) { ++ input_report_key(dev, BTN_TOUCH, 0); ++ input_report_key(dev, BTN_TOOL_PEN, 0); ++ input_report_key(dev2, BTN_TOUCH, 0); ++ input_report_key(dev2, BTN_TOOL_FINGER, 0); ++ ++ input_sync(dev); ++ input_sync(dev2); ++ } ++ ++ priv->late = now_ns + (30 * NSEC_PER_MSEC); ++ ++ ++ if (tpdebug) { ++ printk(KERN_DEBUG "%s %02x %02x %02x %02x %02x %02x\n", ++ __FUNCTION__, psmouse->packet[0], psmouse->packet[1], ++ psmouse->packet[2], psmouse->packet[3], psmouse->packet[4], ++ psmouse->packet[5]); ++ printk(KERN_DEBUG "l=%d r=%d p=%d g=%d x=%d y=%d z=%d\n", ++ left, right, pt_down, gs_down, x, y, z); ++ } ++ ++ if (psmouse->packet[0] == OLPC_PKT_PT) { ++ input_report_key(dev, BTN_LEFT, left); ++ input_report_key(dev, BTN_RIGHT, right); ++ } else if (psmouse->packet[0] == OLPC_PKT_GS) { ++ input_report_key(dev, BTN_LEFT, left); ++ input_report_key(dev, BTN_RIGHT, right); ++ input_report_key(dev2, BTN_LEFT, left); ++ input_report_key(dev2, BTN_RIGHT, right); ++ } ++ ++ input_report_key(dev, BTN_TOUCH, pt_down); ++ input_report_key(dev, BTN_TOOL_PEN, pt_down); ++ input_report_key(dev2, BTN_TOUCH, gs_down); ++ input_report_key(dev2, BTN_TOOL_FINGER, gs_down); ++ ++ input_report_abs(dev2, ABS_PRESSURE, z); ++ ++ if (psmouse->packet[0] == OLPC_PKT_PT && pt_down) { ++ input_report_abs(dev, ABS_X, x); ++ input_report_abs(dev, ABS_Y, y); ++ } else if (psmouse->packet[0] == OLPC_PKT_GS && gs_down) { ++ input_report_abs(dev2, ABS_X, x); ++ input_report_abs(dev2, ABS_Y, y); ++ } ++ ++ input_sync(dev); ++ input_sync(dev2); ++ ++ if (priv->pending_mode == OLPC_GS && ++ psmouse->packet[0] == OLPC_PKT_PT && pt_down) { ++ priv->pending_mode = 0; ++ cancel_delayed_work(&priv->mode_switch); ++ } ++ ++ if (priv->i->flags & (OLPC_PT|OLPC_GS)) { ++ int pending = 0; ++ if (psmouse->packet[0] == OLPC_PKT_PT && !pt_down) ++ pending = OLPC_GS; ++ else if (psmouse->packet[0] == OLPC_PKT_GS && pt_down) ++ pending = OLPC_PT; ++ ++ if (priv->current_mode == pending) { ++ priv->pending_mode = 0; ++ pending = priv->current_mode; ++ } ++ else if (priv->pending_mode != pending) { ++ priv->pending_mode = pending; ++ if (tpdebug) ++ printk(KERN_WARNING "Scheduling mode switch to %s.\n", ++ pending == OLPC_GS ? "GS" : "PT"); ++ ++ /* ++ * Apply a de-bounce when switching from PT to GS, to allow for ++ * spurious PT-up packets. ++ */ ++ if (priv->pending_mode == OLPC_GS) ++ queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50)); ++ else ++ queue_delayed_work(kpsmoused_wq, &priv->mode_switch, 0); ++ } ++ } ++} ++ ++static psmouse_ret_t olpc_process_byte(struct psmouse *psmouse) ++{ ++ psmouse_ret_t ret = PSMOUSE_BAD_DATA; ++ ++ if (psmouse->packet[0] != OLPC_PKT_PT && ++ psmouse->packet[0] != OLPC_PKT_GS) ++ goto out; ++ ++ /* Bytes 2 - 6 should have 0 in the highest bit */ ++ if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 && ++ (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) ++ goto out; ++ ++ if (psmouse->pktcnt == 6) { ++ olpc_process_packet_gspt(psmouse); ++ ret = PSMOUSE_FULL_PACKET; ++ goto out; ++ } ++ ++ ret = PSMOUSE_GOOD_DATA; ++out: ++ if (ret != PSMOUSE_GOOD_DATA && ret != PSMOUSE_FULL_PACKET) ++ printk(KERN_DEBUG "%s: (%d) %02x %02x %02x %02x %02x %02x\n", ++ __FUNCTION__, psmouse->pktcnt, psmouse->packet[0], ++ psmouse->packet[1], psmouse->packet[2], ++ psmouse->packet[3], psmouse->packet[4], ++ psmouse->packet[5]); ++ return ret; ++} ++ ++static struct olpc_model_info *olpc_get_model(struct psmouse *psmouse) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ unsigned char param[4]; ++ int i; ++ ++ /* ++ * Now try "E7 report". Allowed responses are in ++ * olpc_model_data[].signature ++ */ ++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21)) ++ return NULL; ++ ++ param[0] = param[1] = param[2] = 0xff; ++ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) ++ return NULL; ++ ++ pr_debug("olpc.c(%d): E7 report: %2.2x %2.2x %2.2x", ++ __LINE__, param[0], param[1], param[2]); ++ ++ for (i = 0; i < ARRAY_SIZE(olpc_model_data); i++) { ++ if (!memcmp(param, olpc_model_data[i].signature, ++ sizeof(olpc_model_data[i].signature))) { ++ printk(KERN_INFO __FILE__ ": OLPC touchpad revision 0x%x.\n", param[2]); ++ return olpc_model_data + i; ++ } ++ } ++ ++ /* ++ * ALPS creates new IDs pretty frequently; rather than listing them ++ * all, just assume they support the defaults. We've set aside the ++ * first entry of olpc_model_data as the catch-all. ++ */ ++ if (!memcmp(param, olpc_model_data[0].signature, 2)) { ++ printk(KERN_INFO __FILE__ ": unknown ALPS revision %x, assuming default flags.\n", param[2]); ++ return &olpc_model_data[0]; ++ } ++ ++ return NULL; ++} ++ ++static int olpc_find_mode(struct psmouse *psmouse) ++{ ++ struct olpc_data *priv = psmouse->private; ++ int mode = priv->i->flags; ++ ++ if (mode & OLPC_GS) ++ mode = OLPC_GS; ++ else if (mode & OLPC_PT) ++ mode = OLPC_PT; ++ else ++ mode = -1; ++ ++ return mode; ++} ++ ++/* ++ * Touchpad should be disabled before calling this! ++ */ ++static int olpc_new_mode(struct psmouse *psmouse, int mode) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ struct olpc_data *priv = psmouse->private; ++ unsigned char param; ++ int ret; ++ ++ if (tpdebug) ++ printk(KERN_WARNING __FILE__ ": Switching to %d. [%lu]\n", mode, jiffies); ++ ++ if ((ret = ps2_command(ps2dev, ¶m, 0x01F2))) ++ goto failed; ++ if ((ret = ps2_command(ps2dev, ¶m, 0x01F2))) ++ goto failed; ++ if ((ret = ps2_command(ps2dev, ¶m, 0x01F2))) ++ goto failed; ++ ++ switch (mode) { ++ default: ++ printk(KERN_WARNING __FILE__ ": Invalid mode %d. Defaulting to OLPC_GS.\n", mode); ++ case OLPC_GS: ++ ret = ps2_command(ps2dev, NULL, 0xE6); ++ break; ++ case OLPC_PT: ++ ret = ps2_command(ps2dev, NULL, 0xE7); ++ break; ++ } ++ if (ret) ++ goto failed; ++ ++ /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */ ++ psmouse->pktcnt = psmouse->out_of_sync = 0; ++ psmouse->last = jiffies; ++ psmouse->state = PSMOUSE_ACTIVATED; ++ ++ if ((ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE))) ++ goto failed; ++ ++ priv->current_mode = mode; ++ priv->pending_mode = 0; ++ if (tpdebug) ++ printk(KERN_WARNING __FILE__ ": Switched to mode %d successful.\n", mode); ++ ++failed: ++ if (ret) ++ printk(KERN_WARNING __FILE__ ": Mode switch to %d failed! (%d) [%lu]\n", mode, ret, jiffies); ++ return ret; ++} ++ ++static int olpc_absolute_mode(struct psmouse *psmouse, int mode) ++{ ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ ++ /* Switch to 'Advanced mode.', four disables in a row. */ ++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || ++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE)) ++ return -1; ++ ++ return olpc_new_mode(psmouse, mode); ++} ++ ++/* ++ * olpc_poll() - poll the touchpad for current motion packet. ++ * Used in resync. ++ * Note: We can't poll, so always return failure. ++ */ ++static int olpc_poll(struct psmouse *psmouse) ++{ ++ return -1; ++} ++ ++static int olpc_reconnect(struct psmouse *psmouse) ++{ ++ struct olpc_data *priv = psmouse->private; ++ int mode; ++ ++ if (olpc_rev_after(OLPC_REV_B2)) ++ if (psmouse->ps2dev.serio->dev.power.power_state.event != PM_EVENT_ON) ++ return 0; ++ ++ psmouse_reset(psmouse); ++ ++ if (!(priv->i = olpc_get_model(psmouse))) ++ return -1; ++ ++ mode = olpc_find_mode(psmouse); ++ if (mode < 0) ++ return -1; ++ ++ if (olpc_absolute_mode(psmouse, mode)) { ++ printk(KERN_ERR __FILE__ ": Failed to reenable absolute mode.\n"); ++ return -1; ++ } ++ ++ return 0; ++} ++ ++static void olpc_disconnect(struct psmouse *psmouse) ++{ ++ struct olpc_data *priv = psmouse->private; ++ ++ psmouse_reset(psmouse); ++ input_unregister_device(priv->dev2); ++ kfree(priv); ++} ++ ++static void olpc_mode_switch(struct work_struct *w) ++{ ++ struct delayed_work *work = container_of(w, struct delayed_work, work); ++ struct olpc_data *priv = container_of(work, struct olpc_data, mode_switch); ++ struct psmouse *psmouse = priv->psmouse; ++ struct ps2dev *ps2dev = &psmouse->ps2dev; ++ int pending_mode, ret; ++ ++ if (priv->pending_mode == priv->current_mode) { ++ priv->pending_mode = 0; ++ printk (KERN_DEBUG __FILE__ ": In switch_mode, no target mode.\n"); ++ return; ++ } ++ ++ if (tpdebug) ++ printk(KERN_WARNING __FILE__ ": Disable for switch to %d. [%lu]\n", priv->pending_mode, jiffies); ++ ++ /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */ ++ psmouse->state = PSMOUSE_INITIALIZING; ++ ++ ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); ++ if (ret) { ++ /* XXX: if this ever fails, we need to do a full reset! */ ++ printk(KERN_WARNING __FILE__ ": Disable failed for switch to %d. (%d) [%lu]\n", priv->pending_mode, ret, jiffies); ++ return; ++ } ++ ++ /* ++ * ALPS tells us that it may take up to 20msec for the disable to ++ * take effect; however, ps2_command() will wait up to 200msec for ++ * the ACK to come back (and I'm assuming that by the time the ++ * hardware sends back its ACK, it has stopped sending bytes). ++ */ ++ pending_mode = priv->pending_mode; ++ ++ if (olpc_new_mode(psmouse, priv->pending_mode)) ++ goto bad; ++ ++ /* ++ * Deal with a potential race condition. ++ * ++ * If there is a brief tap of a stylus or a fingernail that ++ * triggers a mode switch to PT mode, and the stylus/fingernail is ++ * lifted after the DISABLE above, but before we reenable in the new mode, ++ * then we can get stuck in PT mode. ++ */ ++ if (pending_mode == OLPC_PT) { ++ priv->pending_mode = OLPC_GS; ++ queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50)); ++ } ++ ++ return; ++ ++bad: ++ printk(KERN_WARNING __FILE__ ": Failure to switch modes, resetting device...\n"); ++ olpc_reconnect(psmouse); ++} ++ ++int olpc_init(struct psmouse *psmouse) ++{ ++ struct olpc_data *priv; ++ struct input_dev *dev = psmouse->dev; ++ struct input_dev *dev2; ++ int mode; ++ ++ priv = kzalloc(sizeof(struct olpc_data), GFP_KERNEL); ++ dev2 = input_allocate_device(); ++ if (!priv || !dev2) ++ goto init_fail; ++ ++ psmouse->private = priv; ++ priv->dev2 = dev2; ++ priv->psmouse = psmouse; ++ ++ psmouse_reset(psmouse); ++ if (!(priv->i = olpc_get_model(psmouse))) ++ goto init_fail; ++ ++ mode = olpc_find_mode(psmouse); ++ if (mode < 0) { ++ printk(KERN_ERR __FILE__ ": Failed to identify proper mode\n"); ++ goto init_fail; ++ } ++ ++ if (olpc_absolute_mode(psmouse, mode)) { ++ printk(KERN_ERR __FILE__ ": Failed to enable absolute mode\n"); ++ goto init_fail; ++ } ++ ++ /* ++ * Unset some of the default bits for things we don't have. ++ */ ++ dev->evbit[LONG(EV_REL)] &= ~BIT(EV_REL); ++ dev->relbit[LONG(REL_X)] &= ~(BIT(REL_X) | BIT(REL_Y)); ++ dev->keybit[LONG(BTN_MIDDLE)] &= ~BIT(BTN_MIDDLE); ++ ++ dev->evbit[LONG(EV_KEY)] |= BIT(EV_KEY); ++ dev->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); ++ dev->keybit[LONG(BTN_TOOL_PEN)] |= BIT(BTN_TOOL_PEN); ++ dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT); ++ ++ dev->evbit[LONG(EV_ABS)] |= BIT(EV_ABS); ++ input_set_abs_params(dev, ABS_X, 2, 1000, 0, 0); ++ input_set_abs_params(dev, ABS_Y, 0, 717, 0, 0); ++ ++ snprintf(priv->phys, sizeof(priv->phys), ++ "%s/input1", psmouse->ps2dev.serio->phys); ++ dev2->phys = priv->phys; ++ dev2->name = "OLPC ALPS GlideSensor"; ++ dev2->id.bustype = BUS_I8042; ++ dev2->id.vendor = 0x0002; ++ dev2->id.product = PSMOUSE_OLPC; ++ dev2->id.version = 0x0000; ++ ++ dev2->evbit[LONG(EV_KEY)] |= BIT(EV_KEY); ++ dev2->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH); ++ dev2->keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER); ++ dev2->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT); ++ ++ dev2->evbit[LONG(EV_ABS)] |= BIT(EV_ABS); ++ input_set_abs_params(dev2, ABS_X, 350, 512, 0, 0); ++ input_set_abs_params(dev2, ABS_Y, 70, 325, 0, 0); ++ input_set_abs_params(dev2, ABS_PRESSURE, 0, 63, 0, 0); ++ ++ if (input_register_device(dev2)) { ++ printk(KERN_ERR __FILE__ ": Failed to register GlideSensor\n"); ++ goto init_fail; ++ } ++ ++ psmouse->protocol_handler = olpc_process_byte; ++ psmouse->poll = olpc_poll; ++ psmouse->disconnect = olpc_disconnect; ++ psmouse->reconnect = olpc_reconnect; ++ psmouse->pktsize = 6; ++ ++ /* Disable the idle resync. */ ++ psmouse->resync_time = 0; ++ /* Reset after a lot of bad bytes. */ ++ psmouse->resetafter = 1024; ++ ++ INIT_DELAYED_WORK(&priv->mode_switch, olpc_mode_switch); ++ ++ return 0; ++ ++init_fail: ++ input_free_device(dev2); ++ kfree(priv); ++ return -1; ++} ++ ++int olpc_detect(struct psmouse *psmouse, int set_properties) ++{ ++ if (!olpc_get_model(psmouse)) ++ return -1; ++ ++ if (set_properties) { ++ psmouse->vendor = "ALPS"; ++ psmouse->name = "PenTablet"; ++ psmouse->model = 0; ++ } ++ return 0; ++} ++ +diff --git a/drivers/input/mouse/olpc.h b/drivers/input/mouse/olpc.h +new file mode 100644 +index 0000000..426f8b4 +--- /dev/null ++++ b/drivers/input/mouse/olpc.h +@@ -0,0 +1,49 @@ ++/* ++ * OLPC touchpad PS/2 mouse driver ++ * ++ * Copyright (c) 2006 One Laptop Per Child, inc. ++ * ++ * This driver is partly based on the ALPS driver. ++ * Copyright (c) 2003 Peter Osterlund ++ * Copyright (c) 2005 Vojtech Pavlik ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ */ ++ ++#ifndef _OLPC_H ++#define _OLPC_H ++ ++struct olpc_model_info { ++ unsigned char signature[3]; ++ unsigned char flags; ++}; ++ ++struct olpc_data { ++ struct input_dev *dev2; /* Relative device */ ++ struct psmouse *psmouse; ++ char name[32]; /* Name */ ++ char phys[32]; /* Phys */ ++ struct olpc_model_info *i; /* Info */ ++ int pending_mode; ++ int current_mode; ++ s64 late; ++ struct delayed_work mode_switch; ++}; ++ ++#ifdef CONFIG_MOUSE_PS2_OLPC ++int olpc_detect(struct psmouse *psmouse, int set_properties); ++int olpc_init(struct psmouse *psmouse); ++#else ++inline int olpc_detect(struct psmouse *psmouse, int set_properties) ++{ ++ return -ENOSYS; ++} ++inline int olpc_init(struct psmouse *psmouse) ++{ ++ return -ENOSYS; ++} ++#endif ++ ++#endif +diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c +index b9f0fb2..edcdb68 100644 +--- a/drivers/input/mouse/psmouse-base.c ++++ b/drivers/input/mouse/psmouse-base.c +@@ -26,6 +26,7 @@ + #include "synaptics.h" + #include "logips2pp.h" + #include "alps.h" ++#include "olpc.h" + #include "lifebook.h" + #include "trackpoint.h" + #include "touchkit_ps2.h" +@@ -103,7 +104,7 @@ static struct attribute_group psmouse_attribute_group = { + */ + static DEFINE_MUTEX(psmouse_mutex); + +-static struct workqueue_struct *kpsmoused_wq; ++struct workqueue_struct *kpsmoused_wq; + + struct psmouse_protocol { + enum psmouse_type type; +@@ -320,7 +321,7 @@ static irqreturn_t psmouse_interrupt(struct serio *serio, + goto out; + } + +- if (psmouse->packet[1] == PSMOUSE_RET_ID) { ++ if (psmouse->packet[1] == PSMOUSE_RET_ID || psmouse->packet[1] == PSMOUSE_RET_BAT) { + __psmouse_set_state(psmouse, PSMOUSE_IGNORE); + serio_reconnect(serio); + goto out; +@@ -631,8 +632,21 @@ static int psmouse_extensions(struct psmouse *psmouse, + } + } + ++/* ++ * Try OLPC touchpad. ++ */ + if (max_proto > PSMOUSE_IMEX) { ++ if (olpc_detect(psmouse, set_properties) == 0) { ++ if (!set_properties || olpc_init(psmouse) == 0) ++ return PSMOUSE_OLPC; ++/* ++ * Init failed, try basic relative protocols ++ */ ++ max_proto = PSMOUSE_IMEX; ++ } ++ } + ++ if (max_proto > PSMOUSE_IMEX) { + if (genius_detect(psmouse, set_properties) == 0) + return PSMOUSE_GENPS; + +@@ -762,6 +776,14 @@ static const struct psmouse_protocol psmouse_protocols[] = { + .detect = touchkit_ps2_detect, + }, + #endif ++#ifdef CONFIG_MOUSE_PS2_OLPC ++ { ++ .type = PSMOUSE_OLPC, ++ .name = "OLPC", ++ .alias = "olpc", ++ .detect = olpc_detect, ++ }, ++#endif + { + .type = PSMOUSE_CORTRON, + .name = "CortronPS/2", +diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h +index 1317bdd..c4857df 100644 +--- a/drivers/input/mouse/psmouse.h ++++ b/drivers/input/mouse/psmouse.h +@@ -89,6 +89,7 @@ enum psmouse_type { + PSMOUSE_TRACKPOINT, + PSMOUSE_TOUCHKIT_PS2, + PSMOUSE_CORTRON, ++ PSMOUSE_OLPC, + PSMOUSE_AUTO /* This one should always be last */ + }; + +@@ -96,6 +97,7 @@ int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command); + int psmouse_reset(struct psmouse *psmouse); + void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution); + ++extern struct workqueue_struct *kpsmoused_wq; + + struct psmouse_attribute { + struct device_attribute dattr; +diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c +index c2eea27..3510726 100644 +--- a/drivers/input/serio/i8042.c ++++ b/drivers/input/serio/i8042.c +@@ -868,6 +868,11 @@ static long i8042_panic_blink(long count) + #undef DELAY + + #ifdef CONFIG_PM ++ ++#ifdef CONFIG_OLPC ++#include ++#endif ++ + /* + * Here we try to restore the original BIOS settings. We only want to + * do that once, when we really suspend, not when we taking memory +@@ -878,8 +883,15 @@ static long i8042_panic_blink(long count) + static int i8042_suspend(struct platform_device *dev, pm_message_t state) + { + if (dev->dev.power.power_state.event != state.event) { ++#ifdef CONFIG_OLPC ++ /* Anything newer than B2 remains powered; no reset needed */ ++ if (olpc_rev_before(OLPC_REV_PRE_B3)) { ++#endif + if (state.event == PM_EVENT_SUSPEND) + i8042_controller_reset(); ++#ifdef CONFIG_OLPC ++ } ++#endif + + dev->dev.power.power_state = state; + } +@@ -902,9 +914,15 @@ static int i8042_resume(struct platform_device *dev) + if (dev->dev.power.power_state.event == PM_EVENT_ON) + return 0; + ++#ifdef CONFIG_OLPC ++ if (olpc_rev_before(OLPC_REV_PRE_B3)) { ++#endif + error = i8042_controller_check(); + if (error) + return error; ++#ifdef CONFIG_OLPC ++ } ++#endif + + error = i8042_controller_selftest(); + if (error) +diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c +index 372ca49..c9e5308 100644 +--- a/drivers/input/serio/serio.c ++++ b/drivers/input/serio/serio.c +@@ -916,11 +916,22 @@ static int serio_uevent(struct device *dev, char **envp, int num_envp, char *buf + #endif /* CONFIG_HOTPLUG */ + + #ifdef CONFIG_PM ++ ++#ifdef CONFIG_OLPC ++#include ++#endif ++ + static int serio_suspend(struct device *dev, pm_message_t state) + { + if (dev->power.power_state.event != state.event) { ++#ifdef CONFIG_OLPC ++ if (olpc_rev_before(OLPC_REV_PRE_B3)) { ++#endif + if (state.event == PM_EVENT_SUSPEND) + serio_cleanup(to_serio_port(dev)); ++#ifdef CONFIG_OLPC ++ } ++#endif + + dev->power.power_state = state; + } +diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c +index ef53618..47881d2 100644 +--- a/drivers/media/video/cafe_ccic.c ++++ b/drivers/media/video/cafe_ccic.c +@@ -63,13 +63,13 @@ MODULE_SUPPORTED_DEVICE("Video"); + */ + + #define MAX_DMA_BUFS 3 +-static int alloc_bufs_at_load = 0; +-module_param(alloc_bufs_at_load, bool, 0444); +-MODULE_PARM_DESC(alloc_bufs_at_load, +- "Non-zero value causes DMA buffers to be allocated at module " +- "load time. This increases the chances of successfully getting " +- "those buffers, but at the cost of nailing down the memory from " +- "the outset."); ++static int alloc_bufs_at_read = 0; ++module_param(alloc_bufs_at_read, bool, 0444); ++MODULE_PARM_DESC(alloc_bufs_at_read, ++ "Non-zero value causes DMA buffers to be allocated when the " ++ "video capture device is read, rather than at module load " ++ "time. This saves memory, but decreases the chances of " ++ "successfully getting those buffers."); + + static int n_dma_bufs = 3; + module_param(n_dma_bufs, uint, 0644); +@@ -370,6 +370,10 @@ static int cafe_smbus_write_data(struct cafe_camera *cam, + rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); + cafe_reg_write(cam, REG_TWSIC1, rval); + spin_unlock_irqrestore(&cam->dev_lock, flags); ++ mdelay(2); /* It'll probably take about 900µs anyway, and the ++ CAFÉ is apparently quite sensitive to being poked ++ at this point. If we can work out precisely what's ++ going on and reduce this delay, it would be nice. */ + + /* + * Time to wait for the write to complete. THIS IS A RACY +@@ -1503,7 +1507,7 @@ static int cafe_v4l_release(struct inode *inode, struct file *filp) + } + if (cam->users == 0) { + cafe_ctlr_power_down(cam); +- if (! alloc_bufs_at_load) ++ if (alloc_bufs_at_read) + cafe_free_dma_bufs(cam); + } + mutex_unlock(&cam->s_mutex); +@@ -2162,7 +2166,7 @@ static int cafe_pci_probe(struct pci_dev *pdev, + /* + * If so requested, try to get our DMA buffers now. + */ +- if (alloc_bufs_at_load) { ++ if (!alloc_bufs_at_read) { + if (cafe_alloc_dma_bufs(cam, 1)) + cam_warn(cam, "Unable to alloc DMA buffers at load" + " will try again later."); +diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig +index 73e248f..f7afde3 100644 +--- a/drivers/misc/Kconfig ++++ b/drivers/misc/Kconfig +@@ -202,5 +202,10 @@ config THINKPAD_ACPI_BAY + + If you are not sure, say Y here. + ++config EEPROM_93CX6 ++ tristate "EEPROM 93CX6 support" ++ ---help--- ++ This is a driver for the EEPROM chipsets 93c46 and 93c66. ++ The driver supports both read as well as write commands. + + endif # MISC_DEVICES +diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c +index 93fe2e5..e17eb8e 100644 +--- a/drivers/mmc/card/block.c ++++ b/drivers/mmc/card/block.c +@@ -229,6 +229,11 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) + if (brq.data.blocks > card->host->max_blk_count) + brq.data.blocks = card->host->max_blk_count; + ++ if (mmc_card_sd(card) && !card->host->ios.clock) { ++ printk(KERN_ERR "%s: I/O to stopped card\n", ++ req->rq_disk->disk_name); ++ goto cmd_err; ++ } + mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ); + + /* +diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c +index 20a7d89..9abbb58 100644 +--- a/drivers/mmc/host/sdhci.c ++++ b/drivers/mmc/host/sdhci.c +@@ -411,6 +411,12 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) + break; + } + ++ /* ++ * There's an off-by-one error in the hw that we need to ++ * compensate for. ++ */ ++ count++; ++ + if (count >= 0xF) { + printk(KERN_WARNING "%s: Too large timeout requested!\n", + mmc_hostname(host->mmc)); +@@ -676,19 +682,17 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) + if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) + writeb(0, host->ioaddr + SDHCI_POWER_CONTROL); + +- pwr = SDHCI_POWER_ON; +- + switch (1 << power) { + case MMC_VDD_165_195: +- pwr |= SDHCI_POWER_180; ++ pwr = SDHCI_POWER_180; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: +- pwr |= SDHCI_POWER_300; ++ pwr = SDHCI_POWER_300; + break; + case MMC_VDD_32_33: + case MMC_VDD_33_34: +- pwr |= SDHCI_POWER_330; ++ pwr = SDHCI_POWER_330; + break; + default: + BUG(); +@@ -696,6 +700,10 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) + + writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL); + ++ pwr |= SDHCI_POWER_ON; ++ ++ writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL); ++ + out: + host->power = power; + } +diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig +index fbec8cd..8848e8a 100644 +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -278,6 +278,14 @@ config SSFDC + This enables read only access to SmartMedia formatted NAND + flash. You can mount it with FAT file system. + ++config MTD_OOPS ++ tristate "Log panic/oops to an MTD buffer" ++ depends on MTD ++ help ++ This enables panic and oops messages to be logged to a circular ++ buffer in a flash partition where it can be read back at some ++ later point. ++ + source "drivers/mtd/chips/Kconfig" + + source "drivers/mtd/maps/Kconfig" +diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile +index 6d958a4..7f0b04b 100644 +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -22,6 +22,7 @@ obj-$(CONFIG_NFTL) += nftl.o + obj-$(CONFIG_INFTL) += inftl.o + obj-$(CONFIG_RFD_FTL) += rfd_ftl.o + obj-$(CONFIG_SSFDC) += ssfdc.o ++obj-$(CONFIG_MTD_OOPS) += mtdoops.o + + nftl-objs := nftlcore.o nftlmount.o + inftl-objs := inftlcore.o inftlmount.o +diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c +index 2f19fa7..39eff9f 100644 +--- a/drivers/mtd/chips/cfi_cmdset_0001.c ++++ b/drivers/mtd/chips/cfi_cmdset_0001.c +@@ -526,7 +526,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd, + struct cfi_pri_intelext *extp = cfi->cmdset_priv; + + /* +- * Probing of multi-partition flash ships. ++ * Probing of multi-partition flash chips. + * + * To support multiple partitions when available, we simply arrange + * for each of them to have their own flchip structure even if they +@@ -1780,7 +1780,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, + return ret; + } + +-int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) ++static int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) + { + unsigned long ofs, len; + int ret; +@@ -1930,7 +1930,7 @@ static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len) + printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n", + __FUNCTION__, ofs, len); + cfi_varsize_frob(mtd, do_printlockstatus_oneblock, +- ofs, len, 0); ++ ofs, len, NULL); + #endif + + ret = cfi_varsize_frob(mtd, do_xxlock_oneblock, +@@ -1940,7 +1940,7 @@ static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len) + printk(KERN_DEBUG "%s: lock status after, ret=%d\n", + __FUNCTION__, ret); + cfi_varsize_frob(mtd, do_printlockstatus_oneblock, +- ofs, len, 0); ++ ofs, len, NULL); + #endif + + return ret; +@@ -1954,7 +1954,7 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len) + printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n", + __FUNCTION__, ofs, len); + cfi_varsize_frob(mtd, do_printlockstatus_oneblock, +- ofs, len, 0); ++ ofs, len, NULL); + #endif + + ret = cfi_varsize_frob(mtd, do_xxlock_oneblock, +@@ -1964,7 +1964,7 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len) + printk(KERN_DEBUG "%s: lock status after, ret=%d\n", + __FUNCTION__, ret); + cfi_varsize_frob(mtd, do_printlockstatus_oneblock, +- ofs, len, 0); ++ ofs, len, NULL); + #endif + + return ret; +@@ -2255,7 +2255,7 @@ static void cfi_intelext_save_locks(struct mtd_info *mtd) + adr = region->offset + block * len; + + status = cfi_varsize_frob(mtd, +- do_getlockstatus_oneblock, adr, len, 0); ++ do_getlockstatus_oneblock, adr, len, NULL); + if (status) + set_bit(block, region->lockmap); + else +diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c +index 1f64458..389acc6 100644 +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -1609,7 +1609,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, + } + + +-int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) ++static int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) + { + unsigned long ofs, len; + int ret; +diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c +index 58e561e..593e9d6 100644 +--- a/drivers/mtd/chips/jedec_probe.c ++++ b/drivers/mtd/chips/jedec_probe.c +@@ -70,6 +70,7 @@ + + /* Fujitsu */ + #define MBM29F040C 0x00A4 ++#define MBM29F800BA 0x2258 + #define MBM29LV650UE 0x22D7 + #define MBM29LV320TE 0x22F6 + #define MBM29LV320BE 0x22F9 +@@ -129,6 +130,7 @@ + #define LH28F640BF 0x00b0 + + /* ST - www.st.com */ ++#define M29F800AB 0x0058 + #define M29W800DT 0x00D7 + #define M29W800DB 0x005B + #define M29W160DT 0x22C4 +@@ -646,6 +648,23 @@ static const struct amd_flash_info jedec_table[] = { + } + }, { + .mfr_id = MANUFACTURER_FUJITSU, ++ .dev_id = MBM29F800BA, ++ .name = "Fujitsu MBM29F800BA", ++ .uaddr = { ++ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */ ++ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */ ++ }, ++ .DevSize = SIZE_1MiB, ++ .CmdSet = P_ID_AMD_STD, ++ .NumEraseRegions= 4, ++ .regions = { ++ ERASEINFO(0x04000,1), ++ ERASEINFO(0x02000,2), ++ ERASEINFO(0x08000,1), ++ ERASEINFO(0x10000,15), ++ } ++ }, { ++ .mfr_id = MANUFACTURER_FUJITSU, + .dev_id = MBM29LV650UE, + .name = "Fujitsu MBM29LV650UE", + .uaddr = { +@@ -1510,6 +1529,23 @@ static const struct amd_flash_info jedec_table[] = { + ERASEINFO(0x1000,256) + } + ++ }, { ++ .mfr_id = MANUFACTURER_ST, ++ .dev_id = M29F800AB, ++ .name = "ST M29F800AB", ++ .uaddr = { ++ [0] = MTD_UADDR_0x0AAA_0x0555, /* x8 */ ++ [1] = MTD_UADDR_0x0555_0x02AA, /* x16 */ ++ }, ++ .DevSize = SIZE_1MiB, ++ .CmdSet = P_ID_AMD_STD, ++ .NumEraseRegions= 4, ++ .regions = { ++ ERASEINFO(0x04000,1), ++ ERASEINFO(0x02000,2), ++ ERASEINFO(0x08000,1), ++ ERASEINFO(0x10000,15), ++ } + }, { + .mfr_id = MANUFACTURER_ST, /* FIXME - CFI device? */ + .dev_id = M29W800DT, +diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig +index ff642f8..b4ea64d 100644 +--- a/drivers/mtd/devices/Kconfig ++++ b/drivers/mtd/devices/Kconfig +@@ -69,12 +69,21 @@ config MTD_DATAFLASH26 + If you have such a board and such a DataFlash, say 'Y'. + + config MTD_M25P80 +- tristate "Support for M25 SPI Flash" ++ tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)" + depends on SPI_MASTER && EXPERIMENTAL + help +- This enables access to ST M25P80 and similar SPI flash chips, +- used for program and data storage. Set up your spi devices +- with the right board-specific platform data. ++ This enables access to most modern SPI flash chips, used for ++ program and data storage. Series supported include Atmel AT26DF, ++ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips ++ are supported as well. See the driver source for the current list, ++ or to add other chips. ++ ++ Note that the original DataFlash chips (AT45 series, not AT26DF), ++ need an entirely different driver. ++ ++ Set up your spi devices with the right board-specific platform data, ++ if you want to specify device partitioning or to use a device which ++ doesn't support the JEDEC ID instruction. + + config MTD_SLRAM + tristate "Uncached system RAM" +diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c +index 78c2511..98df5bc 100644 +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -1,5 +1,5 @@ + /* +- * MTD SPI driver for ST M25Pxx flash chips ++ * MTD SPI driver for ST M25Pxx (and similar) serial flash chips + * + * Author: Mike Lavender, mike@steroidmicros.com + * +@@ -19,33 +19,32 @@ + #include + #include + #include +-#include ++#include ++ + #include + #include ++ + #include + #include + +-#include +- +- +-/* NOTE: AT 25F and SST 25LF series are very similar, +- * but commands for sector erase and chip id differ... +- */ + + #define FLASH_PAGESIZE 256 + + /* Flash opcodes. */ +-#define OPCODE_WREN 6 /* Write enable */ +-#define OPCODE_RDSR 5 /* Read status register */ +-#define OPCODE_READ 3 /* Read data bytes */ +-#define OPCODE_PP 2 /* Page program */ +-#define OPCODE_SE 0xd8 /* Sector erase */ +-#define OPCODE_RES 0xab /* Read Electronic Signature */ ++#define OPCODE_WREN 0x06 /* Write enable */ ++#define OPCODE_RDSR 0x05 /* Read status register */ ++#define OPCODE_READ 0x03 /* Read data bytes (low frequency) */ ++#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ ++#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ ++#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ ++#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ ++#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ + #define OPCODE_RDID 0x9f /* Read JEDEC ID */ + + /* Status Register bits. */ + #define SR_WIP 1 /* Write in progress */ + #define SR_WEL 2 /* Write enable latch */ ++/* meaning of other SR_* bits may differ between vendors */ + #define SR_BP0 4 /* Block protect 0 */ + #define SR_BP1 8 /* Block protect 1 */ + #define SR_BP2 0x10 /* Block protect 2 */ +@@ -65,9 +64,10 @@ + + struct m25p { + struct spi_device *spi; +- struct semaphore lock; ++ struct mutex lock; + struct mtd_info mtd; +- unsigned partitioned; ++ unsigned partitioned:1; ++ u8 erase_opcode; + u8 command[4]; + }; + +@@ -150,8 +150,9 @@ static int wait_till_ready(struct m25p *flash) + */ + static int erase_sector(struct m25p *flash, u32 offset) + { +- DEBUG(MTD_DEBUG_LEVEL3, "%s: %s at 0x%08x\n", flash->spi->dev.bus_id, +- __FUNCTION__, offset); ++ DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB at 0x%08x\n", ++ flash->spi->dev.bus_id, __FUNCTION__, ++ flash->mtd.erasesize / 1024, offset); + + /* Wait until finished previous write command. */ + if (wait_till_ready(flash)) +@@ -161,7 +162,7 @@ static int erase_sector(struct m25p *flash, u32 offset) + write_enable(flash); + + /* Set up command buffer. */ +- flash->command[0] = OPCODE_SE; ++ flash->command[0] = flash->erase_opcode; + flash->command[1] = offset >> 16; + flash->command[2] = offset >> 8; + flash->command[3] = offset; +@@ -201,13 +202,17 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) + addr = instr->addr; + len = instr->len; + +- down(&flash->lock); ++ mutex_lock(&flash->lock); ++ ++ /* REVISIT in some cases we could speed up erasing large regions ++ * by using OPCODE_SE instead of OPCODE_BE_4K ++ */ + + /* now erase those sectors */ + while (len) { + if (erase_sector(flash, addr)) { + instr->state = MTD_ERASE_FAILED; +- up(&flash->lock); ++ mutex_unlock(&flash->lock); + return -EIO; + } + +@@ -215,7 +220,7 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) + len -= mtd->erasesize; + } + +- up(&flash->lock); ++ mutex_unlock(&flash->lock); + + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); +@@ -260,16 +265,19 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, + if (retlen) + *retlen = 0; + +- down(&flash->lock); ++ mutex_lock(&flash->lock); + + /* Wait till previous write/erase is done. */ + if (wait_till_ready(flash)) { + /* REVISIT status return?? */ +- up(&flash->lock); ++ mutex_unlock(&flash->lock); + return 1; + } + +- /* NOTE: OPCODE_FAST_READ (if available) is faster... */ ++ /* FIXME switch to OPCODE_FAST_READ. It's required for higher ++ * clocks; and at this writing, every chip this driver handles ++ * supports that opcode. ++ */ + + /* Set up the write data buffer. */ + flash->command[0] = OPCODE_READ; +@@ -281,7 +289,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, + + *retlen = m.actual_length - sizeof(flash->command); + +- up(&flash->lock); ++ mutex_unlock(&flash->lock); + + return 0; + } +@@ -323,7 +331,7 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, + t[1].tx_buf = buf; + spi_message_add_tail(&t[1], &m); + +- down(&flash->lock); ++ mutex_lock(&flash->lock); + + /* Wait until finished previous write command. */ + if (wait_till_ready(flash)) +@@ -381,10 +389,10 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, + if (retlen) + *retlen += m.actual_length + - sizeof(flash->command); +- } +- } ++ } ++ } + +- up(&flash->lock); ++ mutex_unlock(&flash->lock); + + return 0; + } +@@ -398,24 +406,118 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, + + struct flash_info { + char *name; +- u8 id; +- u16 jedec_id; ++ ++ /* JEDEC id zero means "no ID" (most older chips); otherwise it has ++ * a high byte of zero plus three data bytes: the manufacturer id, ++ * then a two byte device id. ++ */ ++ u32 jedec_id; ++ ++ /* The size listed here is what works with OPCODE_SE, which isn't ++ * necessarily called a "sector" by the vendor. ++ */ + unsigned sector_size; +- unsigned n_sectors; ++ u16 n_sectors; ++ ++ u16 flags; ++#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */ + }; + ++ ++/* NOTE: double check command sets and memory organization when you add ++ * more flash chips. This current list focusses on newer chips, which ++ * have been converging on command sets which including JEDEC ID. ++ */ + static struct flash_info __devinitdata m25p_data [] = { +- /* REVISIT: fill in JEDEC ids, for parts that have them */ +- { "m25p05", 0x05, 0x2010, 32 * 1024, 2 }, +- { "m25p10", 0x10, 0x2011, 32 * 1024, 4 }, +- { "m25p20", 0x11, 0x2012, 64 * 1024, 4 }, +- { "m25p40", 0x12, 0x2013, 64 * 1024, 8 }, +- { "m25p80", 0x13, 0x0000, 64 * 1024, 16 }, +- { "m25p16", 0x14, 0x2015, 64 * 1024, 32 }, +- { "m25p32", 0x15, 0x2016, 64 * 1024, 64 }, +- { "m25p64", 0x16, 0x2017, 64 * 1024, 128 }, ++ ++ /* Atmel -- some are (confusingly) marketed as "DataFlash" */ ++ { "at25fs010", 0x1f6601, 32 * 1024, 4, SECT_4K, }, ++ { "at25fs040", 0x1f6604, 64 * 1024, 8, SECT_4K, }, ++ ++ { "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, }, ++ ++ { "at26f004", 0x1f0400, 64 * 1024, 8, SECT_4K, }, ++ { "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, }, ++ { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, }, ++ { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, }, ++ ++ /* Spansion -- single (large) sector size only, at least ++ * for the chips listed here (without boot sectors). ++ */ ++ { "s25sl004a", 0x010212, 64 * 1024, 8, }, ++ { "s25sl008a", 0x010213, 64 * 1024, 16, }, ++ { "s25sl016a", 0x010214, 64 * 1024, 32, }, ++ { "s25sl032a", 0x010215, 64 * 1024, 64, }, ++ { "s25sl064a", 0x010216, 64 * 1024, 128, }, ++ ++ /* SST -- large erase sizes are "overlays", "sectors" are 4K */ ++ { "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, }, ++ { "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, }, ++ { "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, }, ++ { "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, }, ++ ++ /* ST Microelectronics -- newer production may have feature updates */ ++ { "m25p05", 0x202010, 32 * 1024, 2, }, ++ { "m25p10", 0x202011, 32 * 1024, 4, }, ++ { "m25p20", 0x202012, 64 * 1024, 4, }, ++ { "m25p40", 0x202013, 64 * 1024, 8, }, ++ { "m25p80", 0, 64 * 1024, 16, }, ++ { "m25p16", 0x202015, 64 * 1024, 32, }, ++ { "m25p32", 0x202016, 64 * 1024, 64, }, ++ { "m25p64", 0x202017, 64 * 1024, 128, }, ++ { "m25p128", 0x202018, 256 * 1024, 64, }, ++ ++ { "m45pe80", 0x204014, 64 * 1024, 16, }, ++ { "m45pe16", 0x204015, 64 * 1024, 32, }, ++ ++ { "m25pe80", 0x208014, 64 * 1024, 16, }, ++ { "m25pe16", 0x208015, 64 * 1024, 32, SECT_4K, }, ++ ++ /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */ ++ { "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, }, ++ { "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, }, ++ { "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, }, ++ { "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, }, ++ { "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, }, ++ { "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, }, ++ { "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, }, + }; + ++static struct flash_info *__devinit jedec_probe(struct spi_device *spi) ++{ ++ int tmp; ++ u8 code = OPCODE_RDID; ++ u8 id[3]; ++ u32 jedec; ++ struct flash_info *info; ++ ++ /* JEDEC also defines an optional "extended device information" ++ * string for after vendor-specific data, after the three bytes ++ * we use here. Supporting some chips might require using it. ++ */ ++ tmp = spi_write_then_read(spi, &code, 1, id, 3); ++ if (tmp < 0) { ++ DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n", ++ spi->dev.bus_id, tmp); ++ return NULL; ++ } ++ jedec = id[0]; ++ jedec = jedec << 8; ++ jedec |= id[1]; ++ jedec = jedec << 8; ++ jedec |= id[2]; ++ ++ for (tmp = 0, info = m25p_data; ++ tmp < ARRAY_SIZE(m25p_data); ++ tmp++, info++) { ++ if (info->jedec_id == jedec) ++ return info; ++ } ++ dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); ++ return NULL; ++} ++ ++ + /* + * board specific setup should have ensured the SPI clock used here + * matches what the READ command supports, at least until this driver +@@ -429,37 +531,51 @@ static int __devinit m25p_probe(struct spi_device *spi) + unsigned i; + + /* Platform data helps sort out which chip type we have, as +- * well as how this board partitions it. ++ * well as how this board partitions it. If we don't have ++ * a chip ID, try the JEDEC id commands; they'll work for most ++ * newer chips, even if we don't recognize the particular chip. + */ + data = spi->dev.platform_data; +- if (!data || !data->type) { +- /* FIXME some chips can identify themselves with RES +- * or JEDEC get-id commands. Try them ... +- */ +- DEBUG(MTD_DEBUG_LEVEL1, "%s: no chip id\n", +- spi->dev.bus_id); +- return -ENODEV; +- } ++ if (data && data->type) { ++ for (i = 0, info = m25p_data; ++ i < ARRAY_SIZE(m25p_data); ++ i++, info++) { ++ if (strcmp(data->type, info->name) == 0) ++ break; ++ } + +- for (i = 0, info = m25p_data; i < ARRAY_SIZE(m25p_data); i++, info++) { +- if (strcmp(data->type, info->name) == 0) +- break; +- } +- if (i == ARRAY_SIZE(m25p_data)) { +- DEBUG(MTD_DEBUG_LEVEL1, "%s: unrecognized id %s\n", +- spi->dev.bus_id, data->type); ++ /* unrecognized chip? */ ++ if (i == ARRAY_SIZE(m25p_data)) { ++ DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n", ++ spi->dev.bus_id, data->type); ++ info = NULL; ++ ++ /* recognized; is that chip really what's there? */ ++ } else if (info->jedec_id) { ++ struct flash_info *chip = jedec_probe(spi); ++ ++ if (!chip || chip != info) { ++ dev_warn(&spi->dev, "found %s, expected %s\n", ++ chip ? chip->name : "UNKNOWN", ++ info->name); ++ info = NULL; ++ } ++ } ++ } else ++ info = jedec_probe(spi); ++ ++ if (!info) + return -ENODEV; +- } + + flash = kzalloc(sizeof *flash, GFP_KERNEL); + if (!flash) + return -ENOMEM; + + flash->spi = spi; +- init_MUTEX(&flash->lock); ++ mutex_init(&flash->lock); + dev_set_drvdata(&spi->dev, flash); + +- if (data->name) ++ if (data && data->name) + flash->mtd.name = data->name; + else + flash->mtd.name = spi->dev.bus_id; +@@ -468,17 +584,25 @@ static int __devinit m25p_probe(struct spi_device *spi) + flash->mtd.writesize = 1; + flash->mtd.flags = MTD_CAP_NORFLASH; + flash->mtd.size = info->sector_size * info->n_sectors; +- flash->mtd.erasesize = info->sector_size; + flash->mtd.erase = m25p80_erase; + flash->mtd.read = m25p80_read; + flash->mtd.write = m25p80_write; + ++ /* prefer "small sector" erase if possible */ ++ if (info->flags & SECT_4K) { ++ flash->erase_opcode = OPCODE_BE_4K; ++ flash->mtd.erasesize = 4096; ++ } else { ++ flash->erase_opcode = OPCODE_SE; ++ flash->mtd.erasesize = info->sector_size; ++ } ++ + dev_info(&spi->dev, "%s (%d Kbytes)\n", info->name, + flash->mtd.size / 1024); + + DEBUG(MTD_DEBUG_LEVEL2, +- "mtd .name = %s, .size = 0x%.8x (%uM) " +- ".erasesize = 0x%.8x (%uK) .numeraseregions = %d\n", ++ "mtd .name = %s, .size = 0x%.8x (%uMiB) " ++ ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", + flash->mtd.name, + flash->mtd.size, flash->mtd.size / (1024*1024), + flash->mtd.erasesize, flash->mtd.erasesize / 1024, +@@ -488,7 +612,7 @@ static int __devinit m25p_probe(struct spi_device *spi) + for (i = 0; i < flash->mtd.numeraseregions; i++) + DEBUG(MTD_DEBUG_LEVEL2, + "mtd.eraseregions[%d] = { .offset = 0x%.8x, " +- ".erasesize = 0x%.8x (%uK), " ++ ".erasesize = 0x%.8x (%uKiB), " + ".numblocks = %d }\n", + i, flash->mtd.eraseregions[i].offset, + flash->mtd.eraseregions[i].erasesize, +@@ -516,14 +640,14 @@ static int __devinit m25p_probe(struct spi_device *spi) + } + + if (nr_parts > 0) { +- for (i = 0; i < data->nr_parts; i++) { ++ for (i = 0; i < nr_parts; i++) { + DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " + "{.name = %s, .offset = 0x%.8x, " +- ".size = 0x%.8x (%uK) }\n", +- i, data->parts[i].name, +- data->parts[i].offset, +- data->parts[i].size, +- data->parts[i].size / 1024); ++ ".size = 0x%.8x (%uKiB) }\n", ++ i, parts[i].name, ++ parts[i].offset, ++ parts[i].size, ++ parts[i].size / 1024); + } + flash->partitioned = 1; + return add_mtd_partitions(&flash->mtd, parts, nr_parts); +@@ -560,6 +684,11 @@ static struct spi_driver m25p80_driver = { + }, + .probe = m25p_probe, + .remove = __devexit_p(m25p_remove), ++ ++ /* REVISIT: many of these chips have deep power-down modes, which ++ * should clearly be entered on suspend() to minimize power use. ++ * And also when they're otherwise idle... ++ */ + }; + + +diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c +index a987e91..a5ed6d2 100644 +--- a/drivers/mtd/devices/mtd_dataflash.c ++++ b/drivers/mtd/devices/mtd_dataflash.c +@@ -14,6 +14,7 @@ + #include + #include + #include ++#include + #include + #include + +@@ -89,7 +90,7 @@ struct dataflash { + unsigned short page_offset; /* offset in flash address */ + unsigned int page_size; /* of bytes per page */ + +- struct semaphore lock; ++ struct mutex lock; + struct spi_device *spi; + + struct mtd_info mtd; +@@ -167,7 +168,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) + x.len = 4; + spi_message_add_tail(&x, &msg); + +- down(&priv->lock); ++ mutex_lock(&priv->lock); + while (instr->len > 0) { + unsigned int pageaddr; + int status; +@@ -210,7 +211,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) + instr->len -= priv->page_size; + } + } +- up(&priv->lock); ++ mutex_unlock(&priv->lock); + + /* Inform MTD subsystem that erase is complete */ + instr->state = MTD_ERASE_DONE; +@@ -266,7 +267,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, + x[1].len = len; + spi_message_add_tail(&x[1], &msg); + +- down(&priv->lock); ++ mutex_lock(&priv->lock); + + /* Continuous read, max clock = f(car) which may be less than + * the peak rate available. Some chips support commands with +@@ -279,7 +280,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, + /* plus 4 "don't care" bytes */ + + status = spi_sync(priv->spi, &msg); +- up(&priv->lock); ++ mutex_unlock(&priv->lock); + + if (status >= 0) { + *retlen = msg.actual_length - 8; +@@ -336,7 +337,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, + else + writelen = len; + +- down(&priv->lock); ++ mutex_lock(&priv->lock); + while (remaining > 0) { + DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n", + pageaddr, offset, writelen); +@@ -441,7 +442,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, + else + writelen = remaining; + } +- up(&priv->lock); ++ mutex_unlock(&priv->lock); + + return status; + } +@@ -463,7 +464,7 @@ add_dataflash(struct spi_device *spi, char *name, + if (!priv) + return -ENOMEM; + +- init_MUTEX(&priv->lock); ++ mutex_init(&priv->lock); + priv->spi = spi; + priv->page_size = pagesize; + priv->page_offset = pageoffset; +diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c +index e8f686f..7060a08 100644 +--- a/drivers/mtd/devices/pmc551.c ++++ b/drivers/mtd/devices/pmc551.c +@@ -30,8 +30,8 @@ + * + * Notes: + * Due to what I assume is more buggy SROM, the 64M PMC551 I +- * have available claims that all 4 of it's DRAM banks have 64M +- * of ram configured (making a grand total of 256M onboard). ++ * have available claims that all 4 of its DRAM banks have 64MiB ++ * of ram configured (making a grand total of 256MiB onboard). + * This is slightly annoying since the BAR0 size reflects the + * aperture size, not the dram size, and the V370PDC supplies no + * other method for memory size discovery. This problem is +@@ -70,7 +70,7 @@ + * made the memory unusable, added a fix to code to touch up + * the DRAM some. + * +- * Bugs/FIXME's: ++ * Bugs/FIXMEs: + * * MUST fix the init function to not spin on a register + * waiting for it to set .. this does not safely handle busted + * devices that never reset the register correctly which will +@@ -562,10 +562,10 @@ static u32 fixup_pmc551(struct pci_dev *dev) + /* + * Some screen fun + */ +- printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at " ++ printk(KERN_DEBUG "pmc551: %d%sB (0x%x) of %sprefetchable memory at " + "0x%llx\n", (size < 1024) ? size : (size < 1048576) ? + size >> 10 : size >> 20, +- (size < 1024) ? 'B' : (size < 1048576) ? 'K' : 'M', size, ++ (size < 1024) ? "" : (size < 1048576) ? "Ki" : "Mi", size, + ((dcmd & (0x1 << 3)) == 0) ? "non-" : "", + (unsigned long long)pci_resource_start(dev, 0)); + +@@ -649,14 +649,10 @@ MODULE_DESCRIPTION(PMC551_VERSION); + * Stuff these outside the ifdef so as to not bust compiled in driver support + */ + static int msize = 0; +-#if defined(CONFIG_MTD_PMC551_APERTURE_SIZE) +-static int asize = CONFIG_MTD_PMC551_APERTURE_SIZE; +-#else + static int asize = 0; +-#endif + + module_param(msize, int, 0); +-MODULE_PARM_DESC(msize, "memory size in Megabytes [1 - 1024]"); ++MODULE_PARM_DESC(msize, "memory size in MiB [1 - 1024]"); + module_param(asize, int, 0); + MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]"); + +@@ -799,8 +795,7 @@ static int __init init_pmc551(void) + mtd->owner = THIS_MODULE; + + if (add_mtd_device(mtd)) { +- printk(KERN_NOTICE "pmc551: Failed to register new " +- "device\n"); ++ printk(KERN_NOTICE "pmc551: Failed to register new device\n"); + pci_iounmap(PCI_Device, priv->start); + kfree(mtd->priv); + kfree(mtd); +@@ -811,13 +806,13 @@ static int __init init_pmc551(void) + pci_dev_get(PCI_Device); + + printk(KERN_NOTICE "Registered pmc551 memory device.\n"); +- printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n", ++ printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n", + priv->asize >> 20, + priv->start, priv->start + priv->asize); +- printk(KERN_NOTICE "Total memory is %d%c\n", ++ printk(KERN_NOTICE "Total memory is %d%sB\n", + (length < 1024) ? length : + (length < 1048576) ? length >> 10 : length >> 20, +- (length < 1024) ? 'B' : (length < 1048576) ? 'K' : 'M'); ++ (length < 1024) ? "" : (length < 1048576) ? "Ki" : "Mi"); + priv->nextpmc551 = pmc551list; + pmc551list = mtd; + found++; +@@ -850,7 +845,7 @@ static void __exit cleanup_pmc551(void) + pmc551list = priv->nextpmc551; + + if (priv->start) { +- printk(KERN_DEBUG "pmc551: unmapping %dM starting at " ++ printk(KERN_DEBUG "pmc551: unmapping %dMiB starting at " + "0x%p\n", priv->asize >> 20, priv->start); + pci_iounmap(priv->dev, priv->start); + } +diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c +index 7b96cd0..0c9b305 100644 +--- a/drivers/mtd/maps/nettel.c ++++ b/drivers/mtd/maps/nettel.c +@@ -158,68 +158,11 @@ static struct notifier_block nettel_notifier_block = { + nettel_reboot_notifier, NULL, 0 + }; + +-/* +- * Erase the configuration file system. +- * Used to support the software reset button. +- */ +-static void nettel_erasecallback(struct erase_info *done) +-{ +- wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv; +- wake_up(wait_q); +-} +- +-static struct erase_info nettel_erase; +- +-int nettel_eraseconfig(void) +-{ +- struct mtd_info *mtd; +- DECLARE_WAITQUEUE(wait, current); +- wait_queue_head_t wait_q; +- int ret; +- +- init_waitqueue_head(&wait_q); +- mtd = get_mtd_device(NULL, 2); +- if (!IS_ERR(mtd)) { +- nettel_erase.mtd = mtd; +- nettel_erase.callback = nettel_erasecallback; +- nettel_erase.callback = NULL; +- nettel_erase.addr = 0; +- nettel_erase.len = mtd->size; +- nettel_erase.priv = (u_long) &wait_q; +- nettel_erase.priv = 0; +- +- set_current_state(TASK_INTERRUPTIBLE); +- add_wait_queue(&wait_q, &wait); +- +- ret = mtd->erase(mtd, &nettel_erase); +- if (ret) { +- set_current_state(TASK_RUNNING); +- remove_wait_queue(&wait_q, &wait); +- put_mtd_device(mtd); +- return(ret); +- } +- +- schedule(); /* Wait for erase to finish. */ +- remove_wait_queue(&wait_q, &wait); +- +- put_mtd_device(mtd); +- } +- +- return(0); +-} +- +-#else +- +-int nettel_eraseconfig(void) +-{ +- return(0); +-} +- + #endif + + /****************************************************************************/ + +-int __init nettel_init(void) ++static int __init nettel_init(void) + { + volatile unsigned long *amdpar; + unsigned long amdaddr, maxsize; +@@ -421,10 +364,6 @@ int __init nettel_init(void) + + intel_mtd->owner = THIS_MODULE; + +-#ifndef CONFIG_BLK_DEV_INITRD +- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, 1); +-#endif +- + num_intel_partitions = sizeof(nettel_intel_partitions) / + sizeof(nettel_intel_partitions[0]); + +@@ -477,7 +416,7 @@ out_unmap2: + + /****************************************************************************/ + +-void __exit nettel_cleanup(void) ++static void __exit nettel_cleanup(void) + { + #ifdef CONFIG_MTD_CFI_INTELEXT + unregister_reboot_notifier(&nettel_notifier_block); +diff --git a/drivers/mtd/maps/pmcmsp-ramroot.c b/drivers/mtd/maps/pmcmsp-ramroot.c +index 18049bc..30de5c0 100644 +--- a/drivers/mtd/maps/pmcmsp-ramroot.c ++++ b/drivers/mtd/maps/pmcmsp-ramroot.c +@@ -79,7 +79,6 @@ static int __init init_rrmap(void) + rr_mtd->owner = THIS_MODULE; + + add_mtd_device(rr_mtd); +- ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, rr_mtd->index); + + return 0; + } +diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c +index ef89780..74d9d30 100644 +--- a/drivers/mtd/mtd_blkdevs.c ++++ b/drivers/mtd/mtd_blkdevs.c +@@ -24,10 +24,9 @@ + #include + #include + +-static LIST_HEAD(blktrans_majors); ++#include "mtdcore.h" + +-extern struct mutex mtd_table_mutex; +-extern struct mtd_info *mtd_table[]; ++static LIST_HEAD(blktrans_majors); + + struct mtd_blkcore_priv { + struct task_struct *thread; +@@ -202,7 +201,7 @@ static int blktrans_ioctl(struct inode *inode, struct file *file, + } + } + +-struct block_device_operations mtd_blktrans_ops = { ++static struct block_device_operations mtd_blktrans_ops = { + .owner = THIS_MODULE, + .open = blktrans_open, + .release = blktrans_release, +diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c +index d091b24..22ed96c 100644 +--- a/drivers/mtd/mtdchar.c ++++ b/drivers/mtd/mtdchar.c +@@ -136,7 +136,8 @@ static int mtd_close(struct inode *inode, struct file *file) + + DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n"); + +- if (mtd->sync) ++ /* Only sync if opened RW */ ++ if ((file->f_mode & 2) && mtd->sync) + mtd->sync(mtd); + + put_mtd_device(mtd); +diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c +index c153b64..6c2645e 100644 +--- a/drivers/mtd/mtdcore.c ++++ b/drivers/mtd/mtdcore.c +@@ -22,6 +22,8 @@ + + #include + ++#include "mtdcore.h" ++ + /* These are exported solely for the purpose of mtd_blkdevs.c. You + should not use them for _anything_ else */ + DEFINE_MUTEX(mtd_table_mutex); +diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h +new file mode 100644 +index 0000000..a33251f +--- /dev/null ++++ b/drivers/mtd/mtdcore.h +@@ -0,0 +1,11 @@ ++/* linux/drivers/mtd/mtdcore.h ++ * ++ * Header file for driver private mtdcore exports ++ * ++ */ ++ ++/* These are exported solely for the purpose of mtd_blkdevs.c. You ++ should not use them for _anything_ else */ ++ ++extern struct mutex mtd_table_mutex; ++extern struct mtd_info *mtd_table[MAX_MTD_DEVICES]; +diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c +new file mode 100644 +index 0000000..cfc28ab +--- /dev/null ++++ b/drivers/mtd/mtdoops.c +@@ -0,0 +1,365 @@ ++/* ++ * MTD Oops/Panic logger ++ * ++ * Copyright (C) 2007 Nokia Corporation. All rights reserved. ++ * ++ * Author: Richard Purdie ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA ++ * 02110-1301 USA ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define OOPS_PAGE_SIZE 4096 ++ ++static struct mtdoops_context { ++ int mtd_index; ++ struct work_struct work; ++ struct mtd_info *mtd; ++ int oops_pages; ++ int nextpage; ++ int nextcount; ++ ++ void *oops_buf; ++ int ready; ++ int writecount; ++} oops_cxt; ++ ++static void mtdoops_erase_callback(struct erase_info *done) ++{ ++ wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv; ++ wake_up(wait_q); ++} ++ ++static int mtdoops_erase_block(struct mtd_info *mtd, int offset) ++{ ++ struct erase_info erase; ++ DECLARE_WAITQUEUE(wait, current); ++ wait_queue_head_t wait_q; ++ int ret; ++ ++ init_waitqueue_head(&wait_q); ++ erase.mtd = mtd; ++ erase.callback = mtdoops_erase_callback; ++ erase.addr = offset; ++ if (mtd->erasesize < OOPS_PAGE_SIZE) ++ erase.len = OOPS_PAGE_SIZE; ++ else ++ erase.len = mtd->erasesize; ++ erase.priv = (u_long)&wait_q; ++ ++ set_current_state(TASK_INTERRUPTIBLE); ++ add_wait_queue(&wait_q, &wait); ++ ++ ret = mtd->erase(mtd, &erase); ++ if (ret) { ++ set_current_state(TASK_RUNNING); ++ remove_wait_queue(&wait_q, &wait); ++ printk (KERN_WARNING "mtdoops: erase of region [0x%x, 0x%x] " ++ "on \"%s\" failed\n", ++ erase.addr, erase.len, mtd->name); ++ return ret; ++ } ++ ++ schedule(); /* Wait for erase to finish. */ ++ remove_wait_queue(&wait_q, &wait); ++ ++ return 0; ++} ++ ++static int mtdoops_inc_counter(struct mtdoops_context *cxt) ++{ ++ struct mtd_info *mtd = cxt->mtd; ++ size_t retlen; ++ u32 count; ++ int ret; ++ ++ cxt->nextpage++; ++ if (cxt->nextpage > cxt->oops_pages) ++ cxt->nextpage = 0; ++ cxt->nextcount++; ++ if (cxt->nextcount == 0xffffffff) ++ cxt->nextcount = 0; ++ ++ ret = mtd->read(mtd, cxt->nextpage * OOPS_PAGE_SIZE, 4, ++ &retlen, (u_char *) &count); ++ if ((retlen != 4) || (ret < 0)) { ++ printk(KERN_ERR "mtdoops: Read failure at %d (%d of 4 read)" ++ ", err %d.\n", cxt->nextpage * OOPS_PAGE_SIZE, ++ retlen, ret); ++ return 1; ++ } ++ ++ /* See if we need to erase the next block */ ++ if (count != 0xffffffff) ++ return 1; ++ ++ printk(KERN_DEBUG "mtdoops: Ready %d, %d (no erase)\n", ++ cxt->nextpage, cxt->nextcount); ++ cxt->ready = 1; ++ return 0; ++} ++ ++static void mtdoops_prepare(struct mtdoops_context *cxt) ++{ ++ struct mtd_info *mtd = cxt->mtd; ++ int i = 0, j, ret, mod; ++ ++ /* We were unregistered */ ++ if (!mtd) ++ return; ++ ++ mod = (cxt->nextpage * OOPS_PAGE_SIZE) % mtd->erasesize; ++ if (mod != 0) { ++ cxt->nextpage = cxt->nextpage + ((mtd->erasesize - mod) / OOPS_PAGE_SIZE); ++ if (cxt->nextpage > cxt->oops_pages) ++ cxt->nextpage = 0; ++ } ++ ++ while (mtd->block_isbad && ++ mtd->block_isbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE)) { ++badblock: ++ printk(KERN_WARNING "mtdoops: Bad block at %08x\n", ++ cxt->nextpage * OOPS_PAGE_SIZE); ++ i++; ++ cxt->nextpage = cxt->nextpage + (mtd->erasesize / OOPS_PAGE_SIZE); ++ if (cxt->nextpage > cxt->oops_pages) ++ cxt->nextpage = 0; ++ if (i == (cxt->oops_pages / (mtd->erasesize / OOPS_PAGE_SIZE))) { ++ printk(KERN_ERR "mtdoops: All blocks bad!\n"); ++ return; ++ } ++ } ++ ++ for (j = 0, ret = -1; (j < 3) && (ret < 0); j++) ++ ret = mtdoops_erase_block(mtd, cxt->nextpage * OOPS_PAGE_SIZE); ++ ++ if (ret < 0) { ++ if (mtd->block_markbad) ++ mtd->block_markbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE); ++ goto badblock; ++ } ++ ++ printk(KERN_DEBUG "mtdoops: Ready %d, %d \n", cxt->nextpage, cxt->nextcount); ++ ++ cxt->ready = 1; ++} ++ ++static void mtdoops_workfunc(struct work_struct *work) ++{ ++ struct mtdoops_context *cxt = ++ container_of(work, struct mtdoops_context, work); ++ ++ mtdoops_prepare(cxt); ++} ++ ++static int find_next_position(struct mtdoops_context *cxt) ++{ ++ struct mtd_info *mtd = cxt->mtd; ++ int page, maxpos = 0; ++ u32 count, maxcount = 0xffffffff; ++ size_t retlen; ++ ++ for (page = 0; page < cxt->oops_pages; page++) { ++ mtd->read(mtd, page * OOPS_PAGE_SIZE, 4, &retlen, (u_char *) &count); ++ if (count == 0xffffffff) ++ continue; ++ if (maxcount == 0xffffffff) { ++ maxcount = count; ++ maxpos = page; ++ } else if ((count < 0x40000000) && (maxcount > 0xc0000000)) { ++ maxcount = count; ++ maxpos = page; ++ } else if ((count > maxcount) && (count < 0xc0000000)) { ++ maxcount = count; ++ maxpos = page; ++ } else if ((count > maxcount) && (count > 0xc0000000) ++ && (maxcount > 0x80000000)) { ++ maxcount = count; ++ maxpos = page; ++ } ++ } ++ if (maxcount == 0xffffffff) { ++ cxt->nextpage = 0; ++ cxt->nextcount = 1; ++ cxt->ready = 1; ++ printk(KERN_DEBUG "mtdoops: Ready %d, %d (first init)\n", ++ cxt->nextpage, cxt->nextcount); ++ return 0; ++ } ++ ++ cxt->nextpage = maxpos; ++ cxt->nextcount = maxcount; ++ ++ return mtdoops_inc_counter(cxt); ++} ++ ++ ++static void mtdoops_notify_add(struct mtd_info *mtd) ++{ ++ struct mtdoops_context *cxt = &oops_cxt; ++ int ret; ++ ++ if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0) ++ return; ++ ++ if (mtd->size < (mtd->erasesize * 2)) { ++ printk(KERN_ERR "MTD partition %d not big enough for mtdoops\n", ++ mtd->index); ++ return; ++ } ++ ++ cxt->mtd = mtd; ++ cxt->oops_pages = mtd->size / OOPS_PAGE_SIZE; ++ ++ ret = find_next_position(cxt); ++ if (ret == 1) ++ mtdoops_prepare(cxt); ++ ++ printk(KERN_DEBUG "mtdoops: Attached to MTD device %d\n", mtd->index); ++} ++ ++static void mtdoops_notify_remove(struct mtd_info *mtd) ++{ ++ struct mtdoops_context *cxt = &oops_cxt; ++ ++ if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0) ++ return; ++ ++ cxt->mtd = NULL; ++ flush_scheduled_work(); ++} ++ ++ ++static void ++mtdoops_console_write(struct console *co, const char *s, unsigned int count) ++{ ++ struct mtdoops_context *cxt = co->data; ++ struct mtd_info *mtd = cxt->mtd; ++ int i, ret; ++ ++ if (!cxt->ready || !mtd) ++ return; ++ ++ if (!oops_in_progress && cxt->writecount != 0) { ++ size_t retlen; ++ if (cxt->writecount < OOPS_PAGE_SIZE) ++ memset(cxt->oops_buf + cxt->writecount, 0xff, ++ OOPS_PAGE_SIZE - cxt->writecount); ++ ++ ret = mtd->write(mtd, cxt->nextpage * OOPS_PAGE_SIZE, ++ OOPS_PAGE_SIZE, &retlen, cxt->oops_buf); ++ cxt->ready = 0; ++ cxt->writecount = 0; ++ ++ if ((retlen != OOPS_PAGE_SIZE) || (ret < 0)) ++ printk(KERN_ERR "mtdoops: Write failure at %d (%d of %d" ++ " written), err %d.\n", ++ cxt->nextpage * OOPS_PAGE_SIZE, retlen, ++ OOPS_PAGE_SIZE, ret); ++ ++ ret = mtdoops_inc_counter(cxt); ++ if (ret == 1) ++ schedule_work(&cxt->work); ++ } ++ ++ if (!oops_in_progress) ++ return; ++ ++ if (cxt->writecount == 0) { ++ u32 *stamp = cxt->oops_buf; ++ *stamp = cxt->nextcount; ++ cxt->writecount = 4; ++ } ++ ++ if ((count + cxt->writecount) > OOPS_PAGE_SIZE) ++ count = OOPS_PAGE_SIZE - cxt->writecount; ++ ++ for (i = 0; i < count; i++, s++) ++ *((char *)(cxt->oops_buf) + cxt->writecount + i) = *s; ++ ++ cxt->writecount = cxt->writecount + count; ++} ++ ++static int __init mtdoops_console_setup(struct console *co, char *options) ++{ ++ struct mtdoops_context *cxt = co->data; ++ ++ if (cxt->mtd_index != -1) ++ return -EBUSY; ++ if (co->index == -1) ++ return -EINVAL; ++ ++ cxt->mtd_index = co->index; ++ return 0; ++} ++ ++static struct mtd_notifier mtdoops_notifier = { ++ .add = mtdoops_notify_add, ++ .remove = mtdoops_notify_remove, ++}; ++ ++static struct console mtdoops_console = { ++ .name = "ttyMTD", ++ .write = mtdoops_console_write, ++ .setup = mtdoops_console_setup, ++ .flags = CON_PRINTBUFFER, ++ .index = -1, ++ .data = &oops_cxt, ++}; ++ ++static int __init mtdoops_console_init(void) ++{ ++ struct mtdoops_context *cxt = &oops_cxt; ++ ++ cxt->mtd_index = -1; ++ cxt->oops_buf = vmalloc(OOPS_PAGE_SIZE); ++ ++ if (!cxt->oops_buf) { ++ printk(KERN_ERR "Failed to allocate oops buffer workspace\n"); ++ return -ENOMEM; ++ } ++ ++ INIT_WORK(&cxt->work, mtdoops_workfunc); ++ ++ register_console(&mtdoops_console); ++ register_mtd_user(&mtdoops_notifier); ++ return 0; ++} ++ ++static void __exit mtdoops_console_exit(void) ++{ ++ struct mtdoops_context *cxt = &oops_cxt; ++ ++ unregister_mtd_user(&mtdoops_notifier); ++ unregister_console(&mtdoops_console); ++ vfree(cxt->oops_buf); ++} ++ ++ ++subsys_initcall(mtdoops_console_init); ++module_exit(mtdoops_console_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Richard Purdie "); ++MODULE_DESCRIPTION("MTD Oops/Panic console logger/driver"); +diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig +index f1d60b6..df25cab 100644 +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -134,10 +134,10 @@ config MTD_NAND_S3C2410_HWECC + + config MTD_NAND_NDFC + tristate "NDFC NanD Flash Controller" +- depends on 44x ++ depends on 4xx + select MTD_NAND_ECC_SMC + help +- NDFC Nand Flash Controllers are integrated in EP44x SoCs ++ NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs + + config MTD_NAND_S3C2410_CLKSTOP + bool "S3C2410 NAND IDLE clock stop" +@@ -237,7 +237,7 @@ config MTD_NAND_CAFE + select REED_SOLOMON + select REED_SOLOMON_DEC16 + help +- Use NAND flash attached to the CAFÉ chip designed for the $100 ++ Use NAND flash attached to the CAFÉ chip designed for the OLPC + laptop. + + config MTD_NAND_CS553X +diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c +index cff969d..cca69b3 100644 +--- a/drivers/mtd/nand/cafe_nand.c ++++ b/drivers/mtd/nand/cafe_nand.c +@@ -821,14 +821,53 @@ static struct pci_device_id cafe_nand_tbl[] = { + + MODULE_DEVICE_TABLE(pci, cafe_nand_tbl); + ++static int cafe_nand_resume(struct pci_dev *pdev) ++{ ++ uint32_t timing1, timing2, timing3; ++ uint32_t ctrl; ++ struct mtd_info *mtd = pci_get_drvdata(pdev); ++ struct cafe_priv *cafe = mtd->priv; ++ ++ timing1 = timing2 = timing3 = 0xffffffff; ++ /* Start off by resetting the NAND controller completely */ ++ cafe_writel(cafe, 1, NAND_RESET); ++ cafe_writel(cafe, 0, NAND_RESET); ++ cafe_writel(cafe, timing1, NAND_TIMING1); ++ cafe_writel(cafe, timing2, NAND_TIMING2); ++ cafe_writel(cafe, timing3, NAND_TIMING3); ++ cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK); ++ ++ /* Disable master reset, enable NAND clock */ ++ ctrl = cafe_readl(cafe, GLOBAL_CTRL); ++ ctrl &= 0xffffeff0; ++ ctrl |= 0x00007000; ++ cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL); ++ cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL); ++ cafe_writel(cafe, 0, NAND_DMA_CTRL); ++ cafe_writel(cafe, 0x7006, GLOBAL_CTRL); ++ cafe_writel(cafe, 0x700a, GLOBAL_CTRL); ++ ++ /* Set up DMA address */ ++ cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0); ++ if (sizeof(cafe->dmaaddr) > 4) ++ /* Shift in two parts to shut the compiler up */ ++ cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1); ++ else ++ cafe_writel(cafe, 0, NAND_DMA_ADDR1); ++ ++ /* Enable NAND IRQ in global IRQ mask register */ ++ cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK); ++ return 0; ++} ++ + static struct pci_driver cafe_nand_pci_driver = { + .name = "CAFÉ NAND", + .id_table = cafe_nand_tbl, + .probe = cafe_nand_probe, + .remove = __devexit_p(cafe_nand_remove), ++ .resume = cafe_nand_resume, + #ifdef CONFIG_PMx + .suspend = cafe_nand_suspend, +- .resume = cafe_nand_resume, + #endif + }; + +diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c +index fd7a8d5..1c0e89f 100644 +--- a/drivers/mtd/nand/ndfc.c ++++ b/drivers/mtd/nand/ndfc.c +@@ -24,7 +24,11 @@ + #include + + #include ++#ifdef CONFIG_40x ++#include ++#else + #include ++#endif + + struct ndfc_nand_mtd { + struct mtd_info mtd; +@@ -230,7 +234,11 @@ static int ndfc_nand_probe(struct platform_device *pdev) + struct ndfc_controller *ndfc = &ndfc_ctrl; + unsigned long long phys = settings->ndfc_erpn | res->start; + ++#ifndef CONFIG_PHYS_64BIT ++ ndfc->ndfcbase = ioremap((phys_addr_t)phys, res->end - res->start + 1); ++#else + ndfc->ndfcbase = ioremap64(phys, res->end - res->start + 1); ++#endif + if (!ndfc->ndfcbase) { + printk(KERN_ERR "NDFC: ioremap failed\n"); + return -EIO; +diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig +index c257d39..cb41cbc 100644 +--- a/drivers/mtd/onenand/Kconfig ++++ b/drivers/mtd/onenand/Kconfig +@@ -40,4 +40,27 @@ config MTD_ONENAND_OTP + + OTP block is fully-guaranteed to be a valid block. + ++config MTD_ONENAND_2X_PROGRAM ++ bool "OneNAND 2X program support" ++ help ++ The 2X Program is an extension of Program Operation. ++ Since the device is equipped with two DataRAMs, and two-plane NAND ++ Flash memory array, these two component enables simultaneous program ++ of 4KiB. Plane1 has only even blocks such as block0, block2, block4 ++ while Plane2 has only odd blocks such as block1, block3, block5. ++ So MTD regards it as 4KiB page size and 256KiB block size ++ ++ Now the following chips support it. (KFXXX16Q2M) ++ Demux: KFG2G16Q2M, KFH4G16Q2M, KFW8G16Q2M, ++ Mux: KFM2G16Q2M, KFN4G16Q2M, ++ ++ And more recent chips ++ ++config MTD_ONENAND_SIM ++ tristate "OneNAND simulator support" ++ depends on MTD_PARTITIONS ++ help ++ The simulator may simulate various OneNAND flash chips for the ++ OneNAND MTD layer. ++ + endif # MTD_ONENAND +diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile +index 269cfe4..4d2eacf 100644 +--- a/drivers/mtd/onenand/Makefile ++++ b/drivers/mtd/onenand/Makefile +@@ -8,4 +8,7 @@ obj-$(CONFIG_MTD_ONENAND) += onenand.o + # Board specific. + obj-$(CONFIG_MTD_ONENAND_GENERIC) += generic.o + ++# Simulator ++obj-$(CONFIG_MTD_ONENAND_SIM) += onenand_sim.o ++ + onenand-objs = onenand_base.o onenand_bbt.o +diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c +index 0537fac..7d194cf 100644 +--- a/drivers/mtd/onenand/onenand_base.c ++++ b/drivers/mtd/onenand/onenand_base.c +@@ -206,6 +206,15 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le + default: + block = (int) (addr >> this->erase_shift); + page = (int) (addr >> this->page_shift); ++ ++ if (ONENAND_IS_2PLANE(this)) { ++ /* Make the even block number */ ++ block &= ~1; ++ /* Is it the odd plane? */ ++ if (addr & this->writesize) ++ block++; ++ page >>= 1; ++ } + page &= this->page_mask; + break; + } +@@ -216,8 +225,12 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le + value = onenand_bufferram_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); + +- /* Switch to the next data buffer */ +- ONENAND_SET_NEXT_BUFFERRAM(this); ++ if (ONENAND_IS_2PLANE(this)) ++ /* It is always BufferRAM0 */ ++ ONENAND_SET_BUFFERRAM0(this); ++ else ++ /* Switch to the next data buffer */ ++ ONENAND_SET_NEXT_BUFFERRAM(this); + + return 0; + } +@@ -247,6 +260,8 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le + break; + + default: ++ if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG) ++ cmd = ONENAND_CMD_2X_PROG; + dataram = ONENAND_CURRENT_BUFFERRAM(this); + break; + } +@@ -445,8 +460,9 @@ static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area) + struct onenand_chip *this = mtd->priv; + + if (ONENAND_CURRENT_BUFFERRAM(this)) { ++ /* Note: the 'this->writesize' is a real page size */ + if (area == ONENAND_DATARAM) +- return mtd->writesize; ++ return this->writesize; + if (area == ONENAND_SPARERAM) + return mtd->oobsize; + } +@@ -572,6 +588,30 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area, + } + + /** ++ * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode ++ * @param mtd MTD data structure ++ * @param addr address to check ++ * @return blockpage address ++ * ++ * Get blockpage address at 2x program mode ++ */ ++static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr) ++{ ++ struct onenand_chip *this = mtd->priv; ++ int blockpage, block, page; ++ ++ /* Calculate the even block number */ ++ block = (int) (addr >> this->erase_shift) & ~1; ++ /* Is it the odd plane? */ ++ if (addr & this->writesize) ++ block++; ++ page = (int) (addr >> (this->page_shift + 1)) & this->page_mask; ++ blockpage = (block << 7) | page; ++ ++ return blockpage; ++} ++ ++/** + * onenand_check_bufferram - [GENERIC] Check BufferRAM information + * @param mtd MTD data structure + * @param addr address to check +@@ -585,7 +625,10 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr) + int blockpage, found = 0; + unsigned int i; + +- blockpage = (int) (addr >> this->page_shift); ++ if (ONENAND_IS_2PLANE(this)) ++ blockpage = onenand_get_2x_blockpage(mtd, addr); ++ else ++ blockpage = (int) (addr >> this->page_shift); + + /* Is there valid data? */ + i = ONENAND_CURRENT_BUFFERRAM(this); +@@ -625,7 +668,10 @@ static void onenand_update_bufferram(struct mtd_info *mtd, loff_t addr, + int blockpage; + unsigned int i; + +- blockpage = (int) (addr >> this->page_shift); ++ if (ONENAND_IS_2PLANE(this)) ++ blockpage = onenand_get_2x_blockpage(mtd, addr); ++ else ++ blockpage = (int) (addr >> this->page_shift); + + /* Invalidate another BufferRAM */ + i = ONENAND_NEXT_BUFFERRAM(this); +@@ -734,6 +780,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, + int read = 0, column; + int thislen; + int ret = 0, boundary = 0; ++ int writesize = this->writesize; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); + +@@ -754,22 +801,22 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, + /* Do first load to bufferRAM */ + if (read < len) { + if (!onenand_check_bufferram(mtd, from)) { +- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize); ++ this->command(mtd, ONENAND_CMD_READ, from, writesize); + ret = this->wait(mtd, FL_READING); + onenand_update_bufferram(mtd, from, !ret); + } + } + +- thislen = min_t(int, mtd->writesize, len - read); +- column = from & (mtd->writesize - 1); +- if (column + thislen > mtd->writesize) +- thislen = mtd->writesize - column; ++ thislen = min_t(int, writesize, len - read); ++ column = from & (writesize - 1); ++ if (column + thislen > writesize) ++ thislen = writesize - column; + + while (!ret) { + /* If there is more to load then start next load */ + from += thislen; + if (read + thislen < len) { +- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize); ++ this->command(mtd, ONENAND_CMD_READ, from, writesize); + /* + * Chip boundary handling in DDP + * Now we issued chip 1 read and pointed chip 1 +@@ -794,7 +841,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, + this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2); + ONENAND_SET_NEXT_BUFFERRAM(this); + buf += thislen; +- thislen = min_t(int, mtd->writesize, len - read); ++ thislen = min_t(int, writesize, len - read); + column = 0; + cond_resched(); + /* Now wait for load */ +@@ -1079,7 +1126,7 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, + /* Read more? */ + if (read < len) { + /* Update Page size */ +- from += mtd->writesize; ++ from += this->writesize; + column = 0; + } + } +@@ -1135,12 +1182,12 @@ static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, + int thislen, column; + + while (len != 0) { +- thislen = min_t(int, mtd->writesize, len); +- column = addr & (mtd->writesize - 1); +- if (column + thislen > mtd->writesize) +- thislen = mtd->writesize - column; ++ thislen = min_t(int, this->writesize, len); ++ column = addr & (this->writesize - 1); ++ if (column + thislen > this->writesize) ++ thislen = this->writesize - column; + +- this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize); ++ this->command(mtd, ONENAND_CMD_READ, addr, this->writesize); + + onenand_update_bufferram(mtd, addr, 0); + +@@ -1236,6 +1283,10 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, + + /* In partial page write we don't update bufferram */ + onenand_update_bufferram(mtd, to, !ret && !subpage); ++ if (ONENAND_IS_2PLANE(this)) { ++ ONENAND_SET_BUFFERRAM1(this); ++ onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage); ++ } + + if (ret) { + printk(KERN_ERR "onenand_write: write filaed %d\n", ret); +@@ -1384,6 +1435,10 @@ static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len, + this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize); + + onenand_update_bufferram(mtd, to, 0); ++ if (ONENAND_IS_2PLANE(this)) { ++ ONENAND_SET_BUFFERRAM1(this); ++ onenand_update_bufferram(mtd, to + this->writesize, 0); ++ } + + ret = this->wait(mtd, FL_WRITING); + if (ret) { +@@ -2107,6 +2162,7 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, + * + * Check and set OneNAND features + * - lock scheme ++ * - two plane + */ + static void onenand_check_features(struct mtd_info *mtd) + { +@@ -2118,19 +2174,35 @@ static void onenand_check_features(struct mtd_info *mtd) + process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT; + + /* Lock scheme */ +- if (density >= ONENAND_DEVICE_DENSITY_1Gb) { ++ switch (density) { ++ case ONENAND_DEVICE_DENSITY_4Gb: ++ this->options |= ONENAND_HAS_2PLANE; ++ ++ case ONENAND_DEVICE_DENSITY_2Gb: ++ /* 2Gb DDP don't have 2 plane */ ++ if (!ONENAND_IS_DDP(this)) ++ this->options |= ONENAND_HAS_2PLANE; ++ this->options |= ONENAND_HAS_UNLOCK_ALL; ++ ++ case ONENAND_DEVICE_DENSITY_1Gb: + /* A-Die has all block unlock */ +- if (process) { +- printk(KERN_DEBUG "Chip support all block unlock\n"); ++ if (process) + this->options |= ONENAND_HAS_UNLOCK_ALL; +- } +- } else { +- /* Some OneNAND has continues lock scheme */ +- if (!process) { +- printk(KERN_DEBUG "Lock scheme is Continues Lock\n"); ++ break; ++ ++ default: ++ /* Some OneNAND has continuous lock scheme */ ++ if (!process) + this->options |= ONENAND_HAS_CONT_LOCK; +- } ++ break; + } ++ ++ if (this->options & ONENAND_HAS_CONT_LOCK) ++ printk(KERN_DEBUG "Lock scheme is Continuous Lock\n"); ++ if (this->options & ONENAND_HAS_UNLOCK_ALL) ++ printk(KERN_DEBUG "Chip support all block unlock\n"); ++ if (this->options & ONENAND_HAS_2PLANE) ++ printk(KERN_DEBUG "Chip has 2 plane\n"); + } + + /** +@@ -2257,6 +2329,8 @@ static int onenand_probe(struct mtd_info *mtd) + this->erase_shift = ffs(mtd->erasesize) - 1; + this->page_shift = ffs(mtd->writesize) - 1; + this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1; ++ /* It's real page size */ ++ this->writesize = mtd->writesize; + + /* REVIST: Multichip handling */ + +@@ -2265,6 +2339,17 @@ static int onenand_probe(struct mtd_info *mtd) + /* Check OneNAND features */ + onenand_check_features(mtd); + ++ /* ++ * We emulate the 4KiB page and 256KiB erase block size ++ * But oobsize is still 64 bytes. ++ * It is only valid if you turn on 2X program support, ++ * Otherwise it will be ignored by compiler. ++ */ ++ if (ONENAND_IS_2PLANE(this)) { ++ mtd->writesize <<= 1; ++ mtd->erasesize <<= 1; ++ } ++ + return 0; + } + +diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c +new file mode 100644 +index 0000000..b806673 +--- /dev/null ++++ b/drivers/mtd/onenand/onenand_sim.c +@@ -0,0 +1,495 @@ ++/* ++ * linux/drivers/mtd/onenand/onenand_sim.c ++ * ++ * The OneNAND simulator ++ * ++ * Copyright © 2005-2007 Samsung Electronics ++ * Kyungmin Park ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#ifndef CONFIG_ONENAND_SIM_MANUFACTURER ++#define CONFIG_ONENAND_SIM_MANUFACTURER 0xec ++#endif ++#ifndef CONFIG_ONENAND_SIM_DEVICE_ID ++#define CONFIG_ONENAND_SIM_DEVICE_ID 0x04 ++#endif ++#ifndef CONFIG_ONENAND_SIM_VERSION_ID ++#define CONFIG_ONENAND_SIM_VERSION_ID 0x1e ++#endif ++ ++static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER; ++static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID; ++static int version_id = CONFIG_ONENAND_SIM_VERSION_ID; ++ ++struct onenand_flash { ++ void __iomem *base; ++ void __iomem *data; ++}; ++ ++#define ONENAND_CORE(flash) (flash->data) ++#define ONENAND_CORE_SPARE(flash, this, offset) \ ++ ((flash->data) + (this->chipsize) + (offset >> 5)) ++ ++#define ONENAND_MAIN_AREA(this, offset) \ ++ (this->base + ONENAND_DATARAM + offset) ++ ++#define ONENAND_SPARE_AREA(this, offset) \ ++ (this->base + ONENAND_SPARERAM + offset) ++ ++#define ONENAND_GET_WP_STATUS(this) \ ++ (readw(this->base + ONENAND_REG_WP_STATUS)) ++ ++#define ONENAND_SET_WP_STATUS(v, this) \ ++ (writew(v, this->base + ONENAND_REG_WP_STATUS)) ++ ++/* It has all 0xff chars */ ++#define MAX_ONENAND_PAGESIZE (2048 + 64) ++static unsigned char *ffchars; ++ ++static struct mtd_partition os_partitions[] = { ++ { ++ .name = "OneNAND simulator partition", ++ .offset = 0, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++/* ++ * OneNAND simulator mtd ++ */ ++struct onenand_info { ++ struct mtd_info mtd; ++ struct mtd_partition *parts; ++ struct onenand_chip onenand; ++ struct onenand_flash flash; ++}; ++ ++struct onenand_info *info; ++ ++#define DPRINTK(format, args...) \ ++do { \ ++ printk(KERN_DEBUG "%s[%d]: " format "\n", __func__, \ ++ __LINE__, ##args); \ ++} while (0) ++ ++/** ++ * onenand_lock_handle - Handle Lock scheme ++ * @param this OneNAND device structure ++ * @param cmd The command to be sent ++ * ++ * Send lock command to OneNAND device. ++ * The lock scheme is depends on chip type. ++ */ ++static void onenand_lock_handle(struct onenand_chip *this, int cmd) ++{ ++ int block_lock_scheme; ++ int status; ++ ++ status = ONENAND_GET_WP_STATUS(this); ++ block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK); ++ ++ switch (cmd) { ++ case ONENAND_CMD_UNLOCK: ++ if (block_lock_scheme) ++ ONENAND_SET_WP_STATUS(ONENAND_WP_US, this); ++ else ++ ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this); ++ break; ++ ++ case ONENAND_CMD_LOCK: ++ if (block_lock_scheme) ++ ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this); ++ else ++ ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this); ++ break; ++ ++ case ONENAND_CMD_LOCK_TIGHT: ++ if (block_lock_scheme) ++ ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this); ++ else ++ ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this); ++ break; ++ ++ default: ++ break; ++ } ++} ++ ++/** ++ * onenand_bootram_handle - Handle BootRAM area ++ * @param this OneNAND device structure ++ * @param cmd The command to be sent ++ * ++ * Emulate BootRAM area. It is possible to do basic operation using BootRAM. ++ */ ++static void onenand_bootram_handle(struct onenand_chip *this, int cmd) ++{ ++ switch (cmd) { ++ case ONENAND_CMD_READID: ++ writew(manuf_id, this->base); ++ writew(device_id, this->base + 2); ++ writew(version_id, this->base + 4); ++ break; ++ ++ default: ++ /* REVIST: Handle other commands */ ++ break; ++ } ++} ++ ++/** ++ * onenand_update_interrupt - Set interrupt register ++ * @param this OneNAND device structure ++ * @param cmd The command to be sent ++ * ++ * Update interrupt register. The status is depends on command. ++ */ ++static void onenand_update_interrupt(struct onenand_chip *this, int cmd) ++{ ++ int interrupt = ONENAND_INT_MASTER; ++ ++ switch (cmd) { ++ case ONENAND_CMD_READ: ++ case ONENAND_CMD_READOOB: ++ interrupt |= ONENAND_INT_READ; ++ break; ++ ++ case ONENAND_CMD_PROG: ++ case ONENAND_CMD_PROGOOB: ++ interrupt |= ONENAND_INT_WRITE; ++ break; ++ ++ case ONENAND_CMD_ERASE: ++ interrupt |= ONENAND_INT_ERASE; ++ break; ++ ++ case ONENAND_CMD_RESET: ++ interrupt |= ONENAND_INT_RESET; ++ break; ++ ++ default: ++ break; ++ } ++ ++ writew(interrupt, this->base + ONENAND_REG_INTERRUPT); ++} ++ ++/** ++ * onenand_check_overwrite - Check over-write if happend ++ * @param dest The destination pointer ++ * @param src The source pointer ++ * @param count The length to be check ++ * @return 0 on same, otherwise 1 ++ * ++ * Compare the source with destination ++ */ ++static int onenand_check_overwrite(void *dest, void *src, size_t count) ++{ ++ unsigned int *s = (unsigned int *) src; ++ unsigned int *d = (unsigned int *) dest; ++ int i; ++ ++ count >>= 2; ++ for (i = 0; i < count; i++) ++ if ((*s++ ^ *d++) != 0) ++ return 1; ++ ++ return 0; ++} ++ ++/** ++ * onenand_data_handle - Handle OneNAND Core and DataRAM ++ * @param this OneNAND device structure ++ * @param cmd The command to be sent ++ * @param dataram Which dataram used ++ * @param offset The offset to OneNAND Core ++ * ++ * Copy data from OneNAND Core to DataRAM (read) ++ * Copy data from DataRAM to OneNAND Core (write) ++ * Erase the OneNAND Core (erase) ++ */ ++static void onenand_data_handle(struct onenand_chip *this, int cmd, ++ int dataram, unsigned int offset) ++{ ++ struct mtd_info *mtd = &info->mtd; ++ struct onenand_flash *flash = this->priv; ++ int main_offset, spare_offset; ++ void __iomem *src; ++ void __iomem *dest; ++ unsigned int i; ++ ++ if (dataram) { ++ main_offset = mtd->writesize; ++ spare_offset = mtd->oobsize; ++ } else { ++ main_offset = 0; ++ spare_offset = 0; ++ } ++ ++ switch (cmd) { ++ case ONENAND_CMD_READ: ++ src = ONENAND_CORE(flash) + offset; ++ dest = ONENAND_MAIN_AREA(this, main_offset); ++ memcpy(dest, src, mtd->writesize); ++ /* Fall through */ ++ ++ case ONENAND_CMD_READOOB: ++ src = ONENAND_CORE_SPARE(flash, this, offset); ++ dest = ONENAND_SPARE_AREA(this, spare_offset); ++ memcpy(dest, src, mtd->oobsize); ++ break; ++ ++ case ONENAND_CMD_PROG: ++ src = ONENAND_MAIN_AREA(this, main_offset); ++ dest = ONENAND_CORE(flash) + offset; ++ /* To handle partial write */ ++ for (i = 0; i < (1 << mtd->subpage_sft); i++) { ++ int off = i * this->subpagesize; ++ if (!memcmp(src + off, ffchars, this->subpagesize)) ++ continue; ++ if (memcmp(dest + off, ffchars, this->subpagesize) && ++ onenand_check_overwrite(dest + off, src + off, this->subpagesize)) ++ printk(KERN_ERR "over-write happend at 0x%08x\n", offset); ++ memcpy(dest + off, src + off, this->subpagesize); ++ } ++ /* Fall through */ ++ ++ case ONENAND_CMD_PROGOOB: ++ src = ONENAND_SPARE_AREA(this, spare_offset); ++ /* Check all data is 0xff chars */ ++ if (!memcmp(src, ffchars, mtd->oobsize)) ++ break; ++ ++ dest = ONENAND_CORE_SPARE(flash, this, offset); ++ if (memcmp(dest, ffchars, mtd->oobsize) && ++ onenand_check_overwrite(dest, src, mtd->oobsize)) ++ printk(KERN_ERR "OOB: over-write happend at 0x%08x\n", ++ offset); ++ memcpy(dest, src, mtd->oobsize); ++ break; ++ ++ case ONENAND_CMD_ERASE: ++ memset(ONENAND_CORE(flash) + offset, 0xff, mtd->erasesize); ++ memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff, ++ (mtd->erasesize >> 5)); ++ break; ++ ++ default: ++ break; ++ } ++} ++ ++/** ++ * onenand_command_handle - Handle command ++ * @param this OneNAND device structure ++ * @param cmd The command to be sent ++ * ++ * Emulate OneNAND command. ++ */ ++static void onenand_command_handle(struct onenand_chip *this, int cmd) ++{ ++ unsigned long offset = 0; ++ int block = -1, page = -1, bufferram = -1; ++ int dataram = 0; ++ ++ switch (cmd) { ++ case ONENAND_CMD_UNLOCK: ++ case ONENAND_CMD_LOCK: ++ case ONENAND_CMD_LOCK_TIGHT: ++ case ONENAND_CMD_UNLOCK_ALL: ++ onenand_lock_handle(this, cmd); ++ break; ++ ++ case ONENAND_CMD_BUFFERRAM: ++ /* Do nothing */ ++ return; ++ ++ default: ++ block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1); ++ if (block & (1 << ONENAND_DDP_SHIFT)) { ++ block &= ~(1 << ONENAND_DDP_SHIFT); ++ /* The half of chip block */ ++ block += this->chipsize >> (this->erase_shift + 1); ++ } ++ if (cmd == ONENAND_CMD_ERASE) ++ break; ++ ++ page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8); ++ page = (page >> ONENAND_FPA_SHIFT); ++ bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER); ++ bufferram >>= ONENAND_BSA_SHIFT; ++ bufferram &= ONENAND_BSA_DATARAM1; ++ dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0; ++ break; ++ } ++ ++ if (block != -1) ++ offset += block << this->erase_shift; ++ ++ if (page != -1) ++ offset += page << this->page_shift; ++ ++ onenand_data_handle(this, cmd, dataram, offset); ++ ++ onenand_update_interrupt(this, cmd); ++} ++ ++/** ++ * onenand_writew - [OneNAND Interface] Emulate write operation ++ * @param value value to write ++ * @param addr address to write ++ * ++ * Write OneNAND register with value ++ */ ++static void onenand_writew(unsigned short value, void __iomem * addr) ++{ ++ struct onenand_chip *this = info->mtd.priv; ++ ++ /* BootRAM handling */ ++ if (addr < this->base + ONENAND_DATARAM) { ++ onenand_bootram_handle(this, value); ++ return; ++ } ++ /* Command handling */ ++ if (addr == this->base + ONENAND_REG_COMMAND) ++ onenand_command_handle(this, value); ++ ++ writew(value, addr); ++} ++ ++/** ++ * flash_init - Initialize OneNAND simulator ++ * @param flash OneNAND simulaotr data strucutres ++ * ++ * Initialize OneNAND simulator. ++ */ ++static int __init flash_init(struct onenand_flash *flash) ++{ ++ int density, size; ++ int buffer_size; ++ ++ flash->base = kzalloc(131072, GFP_KERNEL); ++ if (!flash->base) { ++ printk(KERN_ERR "Unable to allocate base address.\n"); ++ return -ENOMEM; ++ } ++ ++ density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT; ++ size = ((16 << 20) << density); ++ ++ ONENAND_CORE(flash) = vmalloc(size + (size >> 5)); ++ if (!ONENAND_CORE(flash)) { ++ printk(KERN_ERR "Unable to allocate nand core address.\n"); ++ kfree(flash->base); ++ return -ENOMEM; ++ } ++ ++ memset(ONENAND_CORE(flash), 0xff, size + (size >> 5)); ++ ++ /* Setup registers */ ++ writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID); ++ writew(device_id, flash->base + ONENAND_REG_DEVICE_ID); ++ writew(version_id, flash->base + ONENAND_REG_VERSION_ID); ++ ++ if (density < 2) ++ buffer_size = 0x0400; /* 1KiB page */ ++ else ++ buffer_size = 0x0800; /* 2KiB page */ ++ writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE); ++ ++ return 0; ++} ++ ++/** ++ * flash_exit - Clean up OneNAND simulator ++ * @param flash OneNAND simulaotr data strucutres ++ * ++ * Clean up OneNAND simulator. ++ */ ++static void flash_exit(struct onenand_flash *flash) ++{ ++ vfree(ONENAND_CORE(flash)); ++ kfree(flash->base); ++ kfree(flash); ++} ++ ++static int __init onenand_sim_init(void) ++{ ++ /* Allocate all 0xff chars pointer */ ++ ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL); ++ if (!ffchars) { ++ printk(KERN_ERR "Unable to allocate ff chars.\n"); ++ return -ENOMEM; ++ } ++ memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE); ++ ++ /* Allocate OneNAND simulator mtd pointer */ ++ info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL); ++ if (!info) { ++ printk(KERN_ERR "Unable to allocate core structures.\n"); ++ kfree(ffchars); ++ return -ENOMEM; ++ } ++ ++ /* Override write_word function */ ++ info->onenand.write_word = onenand_writew; ++ ++ if (flash_init(&info->flash)) { ++ printk(KERN_ERR "Unable to allocat flash.\n"); ++ kfree(ffchars); ++ kfree(info); ++ return -ENOMEM; ++ } ++ ++ info->parts = os_partitions; ++ ++ info->onenand.base = info->flash.base; ++ info->onenand.priv = &info->flash; ++ ++ info->mtd.name = "OneNAND simulator"; ++ info->mtd.priv = &info->onenand; ++ info->mtd.owner = THIS_MODULE; ++ ++ if (onenand_scan(&info->mtd, 1)) { ++ flash_exit(&info->flash); ++ kfree(ffchars); ++ kfree(info); ++ return -ENXIO; ++ } ++ ++ add_mtd_partitions(&info->mtd, info->parts, ARRAY_SIZE(os_partitions)); ++ ++ return 0; ++} ++ ++static void __exit onenand_sim_exit(void) ++{ ++ struct onenand_chip *this = info->mtd.priv; ++ struct onenand_flash *flash = this->priv; ++ ++ onenand_release(&info->mtd); ++ flash_exit(flash); ++ kfree(ffchars); ++ kfree(info); ++} ++ ++module_init(onenand_sim_init); ++module_exit(onenand_sim_exit); ++ ++MODULE_AUTHOR("Kyungmin Park "); ++MODULE_DESCRIPTION("The OneNAND flash simulator"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c +index 1938d6d..cc01dbd 100644 +--- a/drivers/net/forcedeth.c ++++ b/drivers/net/forcedeth.c +@@ -3556,10 +3556,12 @@ static int nv_request_irq(struct net_device *dev, int intr_test) + } + if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) { + if ((ret = pci_enable_msi(np->pci_dev)) == 0) { ++ pci_intx(np->pci_dev, 0); + np->msi_flags |= NV_MSI_ENABLED; + if (request_irq(np->pci_dev->irq, handler, IRQF_SHARED, dev->name, dev) != 0) { + printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret); + pci_disable_msi(np->pci_dev); ++ pci_intx(np->pci_dev, 1); + np->msi_flags &= ~NV_MSI_ENABLED; + goto out_err; + } +@@ -3601,6 +3603,7 @@ static void nv_free_irq(struct net_device *dev) + free_irq(np->pci_dev->irq, dev); + if (np->msi_flags & NV_MSI_ENABLED) { + pci_disable_msi(np->pci_dev); ++ pci_intx(np->pci_dev, 1); + np->msi_flags &= ~NV_MSI_ENABLED; + } + } +diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c +index 7dcaa09..eb69d4d 100644 +--- a/drivers/pci/quirks.c ++++ b/drivers/pci/quirks.c +@@ -1390,6 +1390,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); + DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); + + /* ++ * According to Tom Sylla, the Geode does not support PCI power management ++ * transition, so we shouldn't need the D3hot delay. ++ */ ++static void __init quirk_geode_pci_pm(struct pci_dev *dev) ++{ ++ pci_pm_d3_delay = 0; ++} ++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, quirk_geode_pci_pm); ++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_geode_pci_pm); ++ ++/* + * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size + * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. + * Re-allocate the region if needed... +diff --git a/drivers/sysprof/Kconfig b/drivers/sysprof/Kconfig +new file mode 100644 +index 0000000..b99c13a +--- /dev/null ++++ b/drivers/sysprof/Kconfig +@@ -0,0 +1,12 @@ ++ ++menu "Sysprof" ++ ++config SYSPROF ++ tristate "Sysprof support" ++ help ++ Say M here to include the sysprof-module. ++ ++ Sysprof is a sampling profiler that uses a kernel module, ++ sysprof-module, to generate stacktraces which are then interpreted by ++ the userspace program "sysprof". ++endmenu +diff --git a/drivers/sysprof/Makefile b/drivers/sysprof/Makefile +new file mode 100644 +index 0000000..cd465e9 +--- /dev/null ++++ b/drivers/sysprof/Makefile +@@ -0,0 +1 @@ ++obj-$(CONFIG_SYSPROF) += sysprof-module.o +diff --git a/drivers/sysprof/config.h b/drivers/sysprof/config.h +new file mode 100644 +index 0000000..bb62689 +--- /dev/null ++++ b/drivers/sysprof/config.h +@@ -0,0 +1,23 @@ ++/* config.h. Generated by configure. */ ++/* config.h.in. Generated from configure.ac by autoheader. */ ++ ++/* Look for global separate debug info in this path */ ++#define DEBUGDIR "/usr/local/lib/debug" ++ ++/* Define to 1 if you have the `iberty' library (-liberty). */ ++/* #undef HAVE_LIBIBERTY */ ++ ++/* Define to the address where bug reports for this package should be sent. */ ++#define PACKAGE_BUGREPORT "" ++ ++/* Define to the full name of this package. */ ++#define PACKAGE_NAME "sysprof" ++ ++/* Define to the full name and version of this package. */ ++#define PACKAGE_STRING "sysprof 1.0.8" ++ ++/* Define to the one symbol short name of this package. */ ++#define PACKAGE_TARNAME "sysprof" ++ ++/* Define to the version of this package. */ ++#define PACKAGE_VERSION "1.0.8" +diff --git a/drivers/sysprof/sysprof-module.c b/drivers/sysprof/sysprof-module.c +new file mode 100644 +index 0000000..36e0b51 +--- /dev/null ++++ b/drivers/sysprof/sysprof-module.c +@@ -0,0 +1,271 @@ ++/* -*- c-basic-offset: 8 -*- */ ++ ++/* Sysprof -- Sampling, systemwide CPU profiler ++ * Copyright 2004, Red Hat, Inc. ++ * Copyright 2004, 2005, Soeren Sandmann ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#ifdef CONFIG_SMP ++# define __SMP__ ++#endif ++#include ++#include /* Needed for KERN_ALERT */ ++#include /* Needed by all modules */ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "sysprof-module.h" ++ ++#include "config.h" ++ ++#include ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ++#include ++#endif ++ ++#if !CONFIG_PROFILING ++# error Sysprof needs a kernel with profiling support compiled in. ++#endif ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) ++# error Sysprof needs a Linux 2.6.11 kernel or later ++#endif ++#include ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Soeren Sandmann (sandmann@daimi.au.dk)"); ++ ++#define SAMPLES_PER_SECOND (200) ++#define INTERVAL ((HZ <= SAMPLES_PER_SECOND)? 1 : (HZ / SAMPLES_PER_SECOND)) ++#define N_TRACES 256 ++ ++static SysprofStackTrace stack_traces[N_TRACES]; ++static SysprofStackTrace * head = &stack_traces[0]; ++static SysprofStackTrace * tail = &stack_traces[0]; ++DECLARE_WAIT_QUEUE_HEAD (wait_for_trace); ++DECLARE_WAIT_QUEUE_HEAD (wait_for_exit); ++ ++/* Macro the names of the registers that are used on each architecture */ ++#if defined(CONFIG_X86_64) ++# define REG_FRAME_PTR rbp ++# define REG_INS_PTR rip ++# define REG_STACK_PTR rsp ++#elif defined(CONFIG_X86) ++# define REG_FRAME_PTR ebp ++# define REG_INS_PTR eip ++# define REG_STACK_PTR esp ++#else ++# error Sysprof only supports the i386 and x86-64 architectures ++#endif ++ ++typedef struct userspace_reader userspace_reader; ++struct userspace_reader ++{ ++ struct task_struct *task; ++ unsigned long cache_address; ++ unsigned long *cache; ++}; ++ ++typedef struct StackFrame StackFrame; ++struct StackFrame { ++ unsigned long next; ++ unsigned long return_address; ++}; ++ ++struct work_struct work; ++ ++static int ++read_frame (void *frame_pointer, StackFrame *frame) ++{ ++#if 0 ++ /* This is commented out because we seem to be called with ++ * (current_thread_info()->addr_limit.seg)) == 0 ++ * which means access_ok() _always_ fails. ++ * ++ * Not sure why (or if) this isn't the case for oprofile ++ */ ++ if (!access_ok(VERIFY_READ, frame_pointer, sizeof(StackFrame))) ++ return 1; ++#endif ++ ++ if (__copy_from_user_inatomic ( ++ frame, frame_pointer, sizeof (StackFrame))) ++ return 1; ++ ++ return 0; ++} ++ ++DEFINE_PER_CPU(int, n_samples); ++ ++static int ++timer_notify (struct pt_regs *regs) ++{ ++ SysprofStackTrace *trace = head; ++ int i; ++ int is_user; ++ static atomic_t in_timer_notify = ATOMIC_INIT(1); ++ int n; ++ ++ n = ++get_cpu_var(n_samples); ++ put_cpu_var(n_samples); ++ ++ if (n % INTERVAL != 0) ++ return 0; ++ ++ /* 0: locked, 1: unlocked */ ++ ++ if (!atomic_dec_and_test(&in_timer_notify)) ++ goto out; ++ ++ is_user = user_mode(regs); ++ ++ if (!current || current->pid == 0) ++ goto out; ++ ++ if (is_user && current->state != TASK_RUNNING) ++ goto out; ++ ++ if (!is_user) ++ { ++ /* kernel */ ++ ++ trace->pid = current->pid; ++ trace->truncated = 0; ++ trace->n_addresses = 1; ++ ++ /* 0x1 is taken by sysprof to mean "in kernel" */ ++ trace->addresses[0] = (void *)0x1; ++ } ++ else ++ { ++ StackFrame *frame_pointer; ++ StackFrame frame; ++ memset(trace, 0, sizeof (SysprofStackTrace)); ++ ++ trace->pid = current->pid; ++ trace->truncated = 0; ++ ++ i = 0; ++ ++ trace->addresses[i++] = (void *)regs->REG_INS_PTR; ++ ++ frame_pointer = (void *)regs->REG_FRAME_PTR; ++ ++ while (read_frame (frame_pointer, &frame) == 0 && ++ i < SYSPROF_MAX_ADDRESSES && ++ (unsigned long)frame_pointer >= regs->REG_STACK_PTR) ++ { ++ trace->addresses[i++] = (void *)frame.return_address; ++ frame_pointer = (StackFrame *)frame.next; ++ } ++ ++ trace->n_addresses = i; ++ ++ if (i == SYSPROF_MAX_ADDRESSES) ++ trace->truncated = 1; ++ else ++ trace->truncated = 0; ++ } ++ ++ if (head++ == &stack_traces[N_TRACES - 1]) ++ head = &stack_traces[0]; ++ ++ wake_up (&wait_for_trace); ++ ++out: ++ atomic_inc(&in_timer_notify); ++ return 0; ++} ++ ++static int ++procfile_read(char *buffer, ++ char **buffer_location, ++ off_t offset, ++ int buffer_len, ++ int *eof, ++ void *data) ++{ ++ if (head == tail) ++ return -EWOULDBLOCK; ++ ++ *buffer_location = (char *)tail; ++ ++ BUG_ON(tail->pid == 0); ++ ++ if (tail++ == &stack_traces[N_TRACES - 1]) ++ tail = &stack_traces[0]; ++ ++ return sizeof (SysprofStackTrace); ++} ++ ++struct proc_dir_entry *trace_proc_file; ++static unsigned int ++procfile_poll(struct file *filp, poll_table *poll_table) ++{ ++ if (head != tail) ++ return POLLIN | POLLRDNORM; ++ ++ poll_wait(filp, &wait_for_trace, poll_table); ++ ++ if (head != tail) ++ return POLLIN | POLLRDNORM; ++ ++ return 0; ++} ++ ++int ++init_module(void) ++{ ++ static struct file_operations fops; ++ ++ trace_proc_file = ++ create_proc_entry ("sysprof-trace", S_IFREG | S_IRUGO, &proc_root); ++ ++ if (!trace_proc_file) ++ return 1; ++ ++ fops = *trace_proc_file->proc_fops; ++ fops.poll = procfile_poll; ++ ++ trace_proc_file->read_proc = procfile_read; ++ trace_proc_file->proc_fops = &fops; ++ trace_proc_file->size = sizeof (SysprofStackTrace); ++ ++ register_timer_hook (timer_notify); ++ ++ printk(KERN_ALERT "sysprof: loaded (%s)\n", PACKAGE_VERSION); ++ ++ return 0; ++} ++ ++void ++cleanup_module(void) ++{ ++ unregister_timer_hook (timer_notify); ++ ++ remove_proc_entry("sysprof-trace", &proc_root); ++ ++ printk(KERN_ALERT "sysprof: unloaded\n"); ++} ++ +diff --git a/drivers/sysprof/sysprof-module.h b/drivers/sysprof/sysprof-module.h +new file mode 100644 +index 0000000..66a11ae +--- /dev/null ++++ b/drivers/sysprof/sysprof-module.h +@@ -0,0 +1,37 @@ ++/* Sysprof -- Sampling, systemwide CPU profiler ++ * Copyright 2004, Red Hat, Inc. ++ * Copyright 2004, 2005, Soeren Sandmann ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#ifndef SYSPROF_MODULE_H ++#define SYSPROF_MODULE_H ++ ++typedef struct SysprofStackTrace SysprofStackTrace; ++ ++#define SYSPROF_MAX_ADDRESSES 512 ++ ++struct SysprofStackTrace ++{ ++ int pid; /* -1 if in kernel */ ++ int truncated; ++ int n_addresses; /* note: this can be 1 if the process was compiled ++ * with -fomit-frame-pointer or is otherwise weird ++ */ ++ void *addresses[SYSPROF_MAX_ADDRESSES]; ++}; ++ ++#endif +diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig +index 5216c11..3e3df7e 100644 +--- a/drivers/video/Kconfig ++++ b/drivers/video/Kconfig +@@ -594,7 +594,7 @@ config FB_TGA + + config FB_VESA + bool "VESA VGA graphics support" +- depends on (FB = y) && X86 ++ depends on (FB = y) && X86 && !VGA_NOPROBE + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT +@@ -1028,7 +1028,7 @@ config FB_CARILLO_RANCH + + config FB_INTEL + tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" +- depends on FB && EXPERIMENTAL && PCI && X86 ++ depends on FB && EXPERIMENTAL && PCI && X86 && !VGA_NOPROBE + select AGP + select AGP_INTEL + select FB_MODE_HELPERS +@@ -1383,7 +1383,7 @@ config FB_SAVAGE_ACCEL + + config FB_SIS + tristate "SiS/XGI display support" +- depends on FB && PCI ++ depends on FB && PCI && !VGA_NOPROBE + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT +@@ -1822,6 +1822,15 @@ config FB_PS3_DEFAULT_SIZE_M + The default value can be overridden on the kernel command line + using the "ps3fb" option (e.g. "ps3fb=9M"); + ++config FB_OLPC_DCON ++ tristate "One Laptop Per Child Display CONtroller support" ++ depends on OLPC ++ select I2C ++ ---help--- ++ Add support for the OLPC DCON controller. This controller is only ++ available on OLPC platforms. Unless you have one of these ++ platforms, you will want to say 'N'. ++ + config FB_XILINX + tristate "Xilinx frame buffer support" + depends on FB && XILINX_VIRTEX +diff --git a/drivers/video/Makefile b/drivers/video/Makefile +index 06eec7b..fc535fb 100644 +--- a/drivers/video/Makefile ++++ b/drivers/video/Makefile +@@ -111,6 +111,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx4008/ + obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o + obj-$(CONFIG_FB_PS3) += ps3fb.o + obj-$(CONFIG_FB_SM501) += sm501fb.o ++obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon.o + obj-$(CONFIG_FB_XILINX) += xilinxfb.o + obj-$(CONFIG_FB_OMAP) += omap/ + +diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c +index 0740272..4ac6a95 100644 +--- a/drivers/video/fbmem.c ++++ b/drivers/video/fbmem.c +@@ -820,6 +820,53 @@ static void try_to_load(int fb) + #endif /* CONFIG_KMOD */ + + int ++fb_powerup(struct fb_info *info) ++{ ++ int ret = 0; ++ ++ if (!info || info->state == FBINFO_STATE_RUNNING) ++ return 0; ++ ++ if (info->fbops->fb_powerup) ++ ret = info->fbops->fb_powerup(info); ++ ++ if (!ret) { ++ acquire_console_sem(); ++ fb_set_suspend(info, 0); ++ release_console_sem(); ++ } ++ ++ return ret; ++} ++ ++int ++fb_powerdown(struct fb_info *info) ++{ ++ int ret = 0; ++ ++ if (!info || info->state == FBINFO_STATE_SUSPENDED) ++ return 0; ++ ++ /* Tell everybody that the fbdev is going down */ ++ acquire_console_sem(); ++ fb_set_suspend(info, 1); ++ release_console_sem(); ++ ++ if (info->fbops->fb_powerdown) ++ ret = info->fbops->fb_powerdown(info); ++ ++ /* If the power down failed, then un-notify */ ++ ++ if (ret) { ++ acquire_console_sem(); ++ fb_set_suspend(info, 0); ++ release_console_sem(); ++ } ++ ++ return ret; ++} ++ ++int + fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var) + { + struct fb_fix_screeninfo *fix = &info->fix; +diff --git a/drivers/video/geode/Makefile b/drivers/video/geode/Makefile +index 957304b..5c98da1 100644 +--- a/drivers/video/geode/Makefile ++++ b/drivers/video/geode/Makefile +@@ -5,5 +5,5 @@ obj-$(CONFIG_FB_GEODE_GX) += gxfb.o + obj-$(CONFIG_FB_GEODE_LX) += lxfb.o + + gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o +-gxfb-objs := gxfb_core.o display_gx.o video_gx.o ++gxfb-objs := gxfb_core.o display_gx.o video_gx.o suspend_gx.o + lxfb-objs := lxfb_core.o lxfb_ops.o +diff --git a/drivers/video/geode/display_gx.c b/drivers/video/geode/display_gx.c +index 0f16e4b..a432b99 100644 +--- a/drivers/video/geode/display_gx.c ++++ b/drivers/video/geode/display_gx.c +@@ -11,26 +11,44 @@ + * Free Software Foundation; either version 2 of the License, or * (at your + * option) any later version. + */ ++ ++#include + #include + #include + #include + #include + #include + #include ++#include + + #include "geodefb.h" + #include "display_gx.h" + +-#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE +-unsigned int gx_frame_buffer_size(void) ++static inline void rmwl(u32 val, u32 *reg) + { +- return CONFIG_FB_GEODE_GX_FBSIZE; ++ u32 in = readl(reg); ++ if (in != val) ++ writel(val, reg); + } +-#else ++ + unsigned int gx_frame_buffer_size(void) + { + unsigned int val; + ++#ifdef CONFIG_OLPC ++ if (machine_is_olpc() && !olpc_has_vsa()) { ++ u32 hi,lo; ++ rdmsr(GLIU0_P2D_RO0, lo, hi); ++ ++ /* Top page number */ ++ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20); ++ ++ val -= (lo & 0x000fffff); /* Subtract bottom page number */ ++ val += 1; /* Adjust page count */ ++ return (val << 12); ++ } ++#endif ++ + /* FB size is reported by a virtual register */ + /* Virtual register class = 0x02 */ + /* VG_MEM_SIZE(512Kb units) = 0x00 */ +@@ -41,7 +59,6 @@ unsigned int gx_frame_buffer_size(void) + val = (unsigned int)(inw(0xAC1E)) & 0xFFl; + return (val << 19); + } +-#endif + + int gx_line_delta(int xres, int bpp) + { +@@ -63,23 +80,23 @@ static void gx_set_mode(struct fb_info *info) + gcfg = readl(par->dc_regs + DC_GENERAL_CFG); + dcfg = readl(par->dc_regs + DC_DISPLAY_CFG); + +- /* Disable the timing generator. */ +- dcfg &= ~(DC_DCFG_TGEN); +- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); ++ /* Programming the clock is costly and ugly, so avoid if if we can */ + +- /* Wait for pending memory requests before disabling the FIFO load. */ +- udelay(100); ++ if (par->curdclk != info->var.pixclock) { ++ /* Disable the timing generator. */ ++ dcfg &= ~(DC_DCFG_TGEN); ++ writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); + +- /* Disable FIFO load and compression. */ +- gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE); +- writel(gcfg, par->dc_regs + DC_GENERAL_CFG); ++ /* Wait for pending memory requests before disabling the FIFO load. */ ++ udelay(100); + +- /* Setup DCLK and its divisor. */ +- par->vid_ops->set_dclk(info); ++ /* Disable FIFO load and compression. */ ++ gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE); ++ writel(gcfg, par->dc_regs + DC_GENERAL_CFG); + +- /* +- * Setup new mode. +- */ ++ /* Setup DCLK and its divisor. */ ++ par->vid_ops->set_dclk(info); ++ } + + /* Clear all unused feature bits. */ + gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE; +@@ -90,12 +107,13 @@ static void gx_set_mode(struct fb_info *info) + gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE; + + /* Framebuffer start offset. */ +- writel(0, par->dc_regs + DC_FB_ST_OFFSET); ++ rmwl(0, par->dc_regs + DC_FB_ST_OFFSET); + + /* Line delta and line buffer length. */ +- writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH); +- writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2, +- par->dc_regs + DC_LINE_SIZE); ++ rmwl(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH); ++ ++ rmwl(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2, ++ par->dc_regs + DC_LINE_SIZE); + + + /* Enable graphics and video data and unmask address lines. */ +@@ -134,17 +152,16 @@ static void gx_set_mode(struct fb_info *info) + vblankend = vsyncend + info->var.upper_margin; + vtotal = vblankend; + +- writel((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING); +- writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING); +- writel((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING); +- +- writel((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING); +- writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING); +- writel((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING); ++ rmwl((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING); ++ rmwl((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING); ++ rmwl((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING); ++ rmwl((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING); ++ rmwl((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING); ++ rmwl((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING); + + /* Write final register values. */ +- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); +- writel(gcfg, par->dc_regs + DC_GENERAL_CFG); ++ rmwl(dcfg, par->dc_regs + DC_DISPLAY_CFG); ++ rmwl(gcfg, par->dc_regs + DC_GENERAL_CFG); + + par->vid_ops->configure_display(info); + +diff --git a/drivers/video/geode/display_gx.h b/drivers/video/geode/display_gx.h +index 0af33f3..d20b877 100644 +--- a/drivers/video/geode/display_gx.h ++++ b/drivers/video/geode/display_gx.h +@@ -20,6 +20,9 @@ extern struct geode_dc_ops gx_dc_ops; + #define GLD_MSR_CONFIG 0xC0002001 + #define GLD_MSR_CONFIG_DM_FP 0x40 + ++/* Used for memory dection on the OLPC */ ++#define GLIU0_P2D_RO0 0x10000029 ++ + /* Display controller registers */ + + #define DC_UNLOCK 0x00 +diff --git a/drivers/video/geode/geode_regs.h b/drivers/video/geode/geode_regs.h +new file mode 100644 +index 0000000..9e75505 +--- /dev/null ++++ b/drivers/video/geode/geode_regs.h +@@ -0,0 +1,242 @@ ++/* This header file defines the registers and suspend/resume ++ structures for the Geode GX and LX. The lxfb driver defines ++ _GEODELX_ before including this file, which will unlock the ++ extra registers that are only valid for LX. ++*/ ++ ++#ifndef _GEODE_REGS_H_ ++#define _GEODE_REGS_H_ ++ ++/* MSRs */ ++ ++#define GX_VP_MSR_PAD_SELECT 0xC0002011 ++#define LX_VP_MSR_PAD_SELECT 0x48000011 ++ ++#define GEODE_MSR_GLCP_DOTPLL 0x4c000015 ++ ++#define GLCP_DOTPLL_RESET (1 << 0) ++#define GLCP_DOTPLL_BYPASS (1 << 15) ++#define GLCP_DOTPLL_HALFPIX (1 << 24) ++#define GLCP_DOTPLL_LOCK (1 << 25) ++ ++/* Registers */ ++#define VP_FP_START 0x400 ++ ++ ++#ifdef _GEODELX_ ++ ++#define GP_REG_SIZE 0x7C ++#define DC_REG_SIZE 0xF0 ++#define VP_REG_SIZE 0x158 ++#define FP_REG_SIZE 0x70 ++ ++#else ++ ++#define GP_REG_SIZE 0x50 ++#define DC_REG_SIZE 0x90 ++#define VP_REG_SIZE 0x138 ++#define FP_REG_SIZE 0x70 ++ ++#endif ++ ++#define DC_PAL_SIZE 0x105 ++ ++struct geoderegs { ++ ++ struct { ++ u64 padsel; ++ u64 dotpll; ++ ++#ifdef _GEODELX_ ++ u64 dfglcfg; ++ u64 dcspare; ++#else ++ u64 rstpll; ++#endif ++ } msr; ++ ++ union { ++ unsigned char b[GP_REG_SIZE]; ++ struct { ++ u32 dst_offset; /* 0x00 */ ++ u32 src_offset; /* 0x04 */ ++ u32 stride; /* 0x08 */ ++ u32 wid_height; /* 0x0C */ ++ u32 src_color_fg; /* 0x10 */ ++ u32 src_color_bg; /* 0x14 */ ++ u32 pat_color_0; /* 0x18 */ ++ u32 pat_color_1; /* 0x1C */ ++ u32 pat_color_2; /* 0x20 */ ++ u32 pat_color_3; /* 0x24 */ ++ u32 pat_color_4; /* 0x28 */ ++ u32 pat_color_5; /* 0x2C */ ++ u32 pat_data_0; /* 0x30 */ ++ u32 pat_data_1; /* 0x34 */ ++ u32 raster_mode; /* 0x38 */ ++ u32 vector_mode; /* 0x3C */ ++ u32 blt_mode; /* 0x40 */ ++ u32 blit_status; /* 0x4C */ ++ u32 hst_src; /* 0x48 */ ++ u32 base_offset; /* 0x4C */ ++ ++#ifdef _GEODELX_ ++ u32 cmd_top; /* 0x50 */ ++ u32 cmd_bot; /* 0x54 */ ++ u32 cmd_read; /* 0x58 */ ++ u32 cmd_write; /* 0x5C */ ++ u32 ch3_offset; /* 0x60 */ ++ u32 ch3_mode_str; /* 0x64 */ ++ u32 ch3_width; /* 0x68 */ ++ u32 ch3_hsrc; /* 0x6C */ ++ u32 lut_index; /* 0x70 */ ++ u32 lut_data; /* 0x74 */ ++ u32 int_cntrl; /* 0x78 */ ++#endif ++ } r; ++ } gp; ++ ++ union { ++ unsigned char b[DC_REG_SIZE]; ++ ++ struct { ++ u32 unlock; /* 0x00 */ ++ u32 gcfg; /* 0x04 */ ++ u32 dcfg; /* 0x08 */ ++ u32 arb; /* 0x0C */ ++ u32 fb_st_offset; /* 0x10 */ ++ u32 cb_st_offset; /* 0x14 */ ++ u32 curs_st_offset; /* 0x18 */ ++ u32 icon_st_offset; /* 0x1C */ ++ u32 vid_y_st_offset; /* 0x20 */ ++ u32 vid_u_st_offset; /* 0x24 */ ++ u32 vid_v_st_offset; /* 0x28 */ ++ u32 dctop; /* 0x2c */ ++ u32 line_size; /* 0x30 */ ++ u32 gfx_pitch; /* 0x34 */ ++ u32 vid_yuv_pitch; /* 0x38 */ ++ u32 rsvd2; /* 0x3C */ ++ u32 h_active_timing; /* 0x40 */ ++ u32 h_blank_timing; /* 0x44 */ ++ u32 h_sync_timing; /* 0x48 */ ++ u32 rsvd3; /* 0x4C */ ++ u32 v_active_timing; /* 0x50 */ ++ u32 v_blank_timing; /* 0x54 */ ++ u32 v_sync_timing; /* 0x58 */ ++ u32 fbactive; /* 0x5C */ ++ u32 dc_cursor_x; /* 0x60 */ ++ u32 dc_cursor_y; /* 0x64 */ ++ u32 dc_icon_x; /* 0x68 */ ++ u32 dc_line_cnt; /* 0x6C */ ++ u32 rsvd5; /* 0x70 - palette address */ ++ u32 rsvd6; /* 0x74 - palette data */ ++ u32 dfifo_diag; /* 0x78 */ ++ u32 cfifo_diag; /* 0x7C */ ++ u32 dc_vid_ds_delta; /* 0x80 */ ++ u32 gliu0_mem_offset; /* 0x84 */ ++ u32 dv_ctl; /* 0x88 - added by LX */ ++ u32 dv_acc; /* 0x8C */ ++ ++#ifdef _GEODELX_ ++ u32 gfx_scale; ++ u32 irq_filt_ctl; ++ u32 filt_coeff1; ++ u32 filt_coeff2; ++ u32 vbi_event_ctl; ++ u32 vbi_odd_ctl; ++ u32 vbi_hor; ++ u32 vbi_ln_odd; ++ u32 vbi_ln_event; ++ u32 vbi_pitch; ++ u32 clr_key; ++ u32 clr_key_mask; ++ u32 clr_key_x; ++ u32 clr_key_y; ++ u32 irq; ++ u32 rsvd8; ++ u32 genlk_ctrl; ++ u32 vid_even_y_st_offset; /* 0xD8 */ ++ u32 vid_even_u_st_offset; /* 0xDC */ ++ u32 vid_even_v_st_offset; /* 0xE0 */ ++ u32 v_active_even_timing; /* 0xE4 */ ++ u32 v_blank_even_timing; /* 0xE8 */ ++ u32 v_sync_even_timing; /* 0xEC */ ++#endif ++ } r; ++ } dc; ++ ++ union { ++ unsigned char b[VP_REG_SIZE]; ++ ++ struct { ++ u64 vcfg; /* 0x00 */ ++ u64 dcfg; /* 0x08 */ ++ u64 vx; /* 0x10 */ ++ u64 vy; /* 0x18 */ ++ u64 vs; /* 0x20 */ ++ u64 vck; /* 0x28 */ ++ u64 vcm; /* 0x30 */ ++ u64 rsvd1; /* 0x38 - Gamma address*/ ++ u64 rsvd2; /* 0x40 - Gamma data*/ ++ u64 rsvd3; /* 0x48 */ ++ u64 misc; /* 0x50 */ ++ u64 ccs; /* 0x58 */ ++ u64 rsvd4[3]; /* 0x60-0x70 */ ++ u64 vdc; /* 0x78 */ ++ u64 vco; /* 0x80 */ ++ u64 crc; /* 0x88 */ ++ u64 crc32; /* 0x90 */ ++ u64 vde; /* 0x98 */ ++ u64 cck; /* 0xA0 */ ++ u64 ccm; /* 0xA8 */ ++ u64 cc1; /* 0xB0 */ ++ u64 cc2; /* 0xB8 */ ++ u64 a1x; /* 0xC0 */ ++ u64 a1y; /* 0xC8 */ ++ u64 a1c; /* 0xD0 */ ++ u64 a1t; /* 0xD8 */ ++ u64 a2x; /* 0xE0 */ ++ u64 a2y; /* 0xE8 */ ++ u64 a2c; /* 0xF0 */ ++ u64 a2t; /* 0xF8 */ ++ u64 a3x; /* 0x100 */ ++ u64 a3y; /* 0x108 */ ++ u64 a3c; /* 0x110 */ ++ u64 a3t; /* 0x118 */ ++ u64 vrr; /* 0x120 */ ++ u64 awt; /* 0x128 */ ++ u64 vtm; /* 0x130 */ ++#ifdef _GEODELX_ ++ u64 vye; /* 0x138 */ ++ u64 a1ye; /* 0x140 */ ++ u32 a2ye; /* 0x148 */ ++ u32 a3ye; /* 0x150 */ ++#endif ++ } r; ++ } vp; ++ ++ union { ++ unsigned char b[FP_REG_SIZE]; ++ ++ struct { ++ u64 pt1; /* 0x400 */ ++ u64 pt2; /* 0x408 */ ++ u64 pm; /* 0x410 */ ++ u64 dfc; /* 0x418 */ ++ u64 blfsr; /* 0x420 */ ++ u64 rlfsr; /* 0x428 */ ++ u64 fmi; /* 0x430 */ ++ u64 fmd; /* 0x438 */ ++ u64 rsvd; /* 0x440 */ ++ u64 dca; /* 0x448 */ ++ u64 dmd; /* 0x450 */ ++ u64 crc; /* 0x458 */ ++ u64 fbb; /* 0x460 */ ++ u64 crc32; /* 0x468 */ ++ } r; ++ } fp; ++ ++ u32 pal[DC_PAL_SIZE]; ++ u32 gamma[256]; ++}; ++ ++#endif +diff --git a/drivers/video/geode/geodefb.h b/drivers/video/geode/geodefb.h +index ae04820..0214d11 100644 +--- a/drivers/video/geode/geodefb.h ++++ b/drivers/video/geode/geodefb.h +@@ -12,6 +12,10 @@ + #ifndef __GEODEFB_H__ + #define __GEODEFB_H__ + ++#define FB_POWER_STATE_OFF 0 ++#define FB_POWER_STATE_SUSPEND 1 ++#define FB_POWER_STATE_ON 2 ++ + struct geodefb_info; + + struct geode_dc_ops { +@@ -21,18 +25,24 @@ struct geode_dc_ops { + + struct geode_vid_ops { + void (*set_dclk)(struct fb_info *); ++ unsigned int (*get_dclk)(struct fb_info *); + void (*configure_display)(struct fb_info *); + int (*blank_display)(struct fb_info *, int blank_mode); + }; + + struct geodefb_par { + int enable_crt; ++ int fbactive; /* True if the current console is in KD_GRAPHICS mode */ + int panel_x; /* dimensions of an attached flat panel, non-zero => enable panel */ + int panel_y; ++ unsigned int curdclk; /* Used by GX to avoid unnessesary clock switching */ + void __iomem *dc_regs; + void __iomem *vid_regs; ++ void __iomem *gp_regs; + struct geode_dc_ops *dc_ops; + struct geode_vid_ops *vid_ops; ++ ++ int state; + }; + + #endif /* !__GEODEFB_H__ */ +diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c +index cf841ef..3eabc53 100644 +--- a/drivers/video/geode/gxfb_core.c ++++ b/drivers/video/geode/gxfb_core.c +@@ -30,12 +30,31 @@ + #include + #include + #include ++#include ++#include ++#include ++#include ++#include + + #include "geodefb.h" + #include "display_gx.h" + #include "video_gx.h" + ++#define FBIOSGAMMA _IOW('F', 0x20, void *) ++#define FBIOGGAMMA _IOW('F', 0x21, void *) ++ ++#ifdef DEBUG ++ ++#define FBIODUMPGP _IOW('F', 0x22, void *) ++#define FBIODUMPDC _IOW('F', 0x23, void *) ++#define FBIODUMPVP _IOW('F', 0x24, void *) ++#define FBIODUMPFP _IOW('F', 0x25, void *) ++ ++#endif ++ + static char *mode_option; ++static int noclear; ++struct fb_info *gxfb_info; + + /* Modes relevant to the GX (taken from modedb.c) */ + static const struct fb_videomode gx_modedb[] __initdata = { +@@ -103,8 +122,20 @@ static const struct fb_videomode gx_modedb[] __initdata = { + { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1200x900-75 - CRT timings for the OLPC mode */ ++ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3, ++ 0, FB_VMODE_NONINTERLACED, 0 } + }; + ++#ifdef CONFIG_OLPC ++static const struct fb_videomode gx_dcon_modedb[] __initdata = { ++ /* The only mode the DCON has is 1200x900 */ ++ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3, ++ 0, FB_VMODE_NONINTERLACED, 0 } ++}; ++#endif ++ ++ + static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) + { + if (var->xres > 1600 || var->yres > 1200) +@@ -137,7 +168,7 @@ static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) + return 0; + } + +-static int gxfb_set_par(struct fb_info *info) ++int gxfb_set_par(struct fb_info *info) + { + struct geodefb_par *par = info->par; + +@@ -204,16 +235,26 @@ static int gxfb_blank(int blank_mode, struct fb_info *info) + return par->vid_ops->blank_display(info, blank_mode); + } + ++static int fbsize; ++ + static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev) + { + struct geodefb_par *par = info->par; +- int fb_len; + int ret; + + ret = pci_enable_device(dev); + if (ret < 0) + return ret; + ++ ret = pci_request_region(dev, 1, "gxfb (graphics processor)"); ++ if (ret < 0) ++ return ret; ++ ++ par->gp_regs = ioremap(pci_resource_start(dev, 1), ++ pci_resource_len(dev, 1)); ++ if (!par->gp_regs) ++ return -ENOMEM; ++ + ret = pci_request_region(dev, 3, "gxfb (video processor)"); + if (ret < 0) + return ret; +@@ -232,36 +273,118 @@ static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *de + ret = pci_request_region(dev, 0, "gxfb (framebuffer)"); + if (ret < 0) + return ret; +- if ((fb_len = gx_frame_buffer_size()) < 0) +- return -ENOMEM; ++ ++ /* If the fbsize wasn't specified then try to probe it */ ++ ++ if (!fbsize) { ++ fbsize = gx_frame_buffer_size(); ++ if (fbsize == 0) ++ return -ENOMEM; ++ } ++ + info->fix.smem_start = pci_resource_start(dev, 0); +- info->fix.smem_len = fb_len; ++ info->fix.smem_len = fbsize; + info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len); + if (!info->screen_base) + return -ENOMEM; + +- /* Set the 16MB aligned base address of the graphics memory region ++ /* Set the 16MiB aligned base address of the graphics memory region + * in the display controller */ + + writel(info->fix.smem_start & 0xFF000000, + par->dc_regs + DC_GLIU0_MEM_OFFSET); + +- dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n", ++ dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n", + info->fix.smem_len / 1024, info->fix.smem_start); + + return 0; + } + ++static int gxfb_ioctl( struct fb_info *info, unsigned int cmd, ++ unsigned long arg) ++{ ++ unsigned int gamma[GXFB_GAMMA_DWORDS]; ++ int ret = -EINVAL; ++ struct geodefb_par *par = info->par; ++ int i; ++ ++ switch(cmd) { ++ case FBIOSGAMMA: ++ /* Read the gamma information from the user - 256 dwords */ ++ ++ if (copy_from_user(gamma, (void * __user) arg, GXFB_GAMMA_SIZE)) ++ return -EFAULT; ++ ++ writel(0, par->vid_regs + GX_GAR); ++ ++ /* Sequential writes to the data register will increment the ++ address automatically */ ++ ++ for(i = 0; i < GXFB_GAMMA_DWORDS; i++) ++ writel(gamma[i] & 0xFFFFFF, par->vid_regs + GX_GDR); ++ ++ writel(readl(par->vid_regs + GX_MISC) & ~GX_MISC_GAM_EN, ++ par->vid_regs + GX_MISC); ++ ++ ret = 0; ++ break; ++ ++ case FBIOGGAMMA: ++ if (readl(par->vid_regs + GX_MISC) & GX_MISC_GAM_EN) ++ return -EINVAL; ++ ++ memset(gamma, 0, GXFB_GAMMA_SIZE); ++ writel(0, par->vid_regs + GX_GAR); ++ ++ for(i = 0; i < GXFB_GAMMA_DWORDS;i++) ++ gamma[i] = readl(par->vid_regs + GX_GDR); ++ ++ if (copy_to_user((void * __user) arg, gamma, GXFB_GAMMA_SIZE)) ++ ret = -EFAULT; ++ else ++ ret = 0; ++ ++ break; ++ ++#ifdef DEBUG ++ case FBIODUMPGP: ++ ret = 0; ++ dump_regs(info, 0); ++ break; ++ ++ case FBIODUMPDC: ++ ret = 0; ++ dump_regs(info, 1); ++ break; ++ ++ case FBIODUMPVP: ++ ret = 0; ++ dump_regs(info, 2); ++ break; ++ ++ case FBIODUMPFP: ++ ret = 0; ++ dump_regs(info, 3); ++ break; ++#endif ++ } ++ ++ return ret; ++} ++ + static struct fb_ops gxfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = gxfb_check_var, + .fb_set_par = gxfb_set_par, + .fb_setcolreg = gxfb_setcolreg, + .fb_blank = gxfb_blank, ++ .fb_ioctl = gxfb_ioctl, + /* No HW acceleration for now. */ + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, ++ .fb_powerdown = gxfb_powerdown, ++ .fb_powerup = gxfb_powerup, + }; + + static struct fb_info * __init gxfb_init_fbinfo(struct device *dev) +@@ -303,23 +426,86 @@ static struct fb_info * __init gxfb_init_fbinfo(struct device *dev) + return info; + } + +-static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id) ++static int gxfb_console_notify(struct notifier_block *self, ++ unsigned long action, void *data) ++{ ++ if (gxfb_info != NULL) { ++ struct geodefb_par *par = gxfb_info->par; ++ par->fbactive = (action == CONSOLE_EVENT_SWITCH_TEXT) ? 0 : 1; ++ } ++ ++ return NOTIFY_OK; ++} ++ ++static struct notifier_block gxfb_console_notifier = { ++ .notifier_call = gxfb_console_notify ++}; ++ ++#ifdef CONFIG_PM ++ ++static int gxfb_suspend(struct pci_dev *pdev, pm_message_t state) ++{ ++ struct fb_info *info = pci_get_drvdata(pdev); ++ struct geodefb_par *par = info->par; ++ ++ if (pdev->dev.power.power_state.event == state.event) ++ return 0; ++ ++ if (state.event == PM_EVENT_SUSPEND) { ++ ++ acquire_console_sem(); ++ gxfb_powerdown(info); ++ ++ par->state = FB_POWER_STATE_OFF; ++ fb_set_suspend(info, 1); ++ ++ release_console_sem(); ++ } ++ ++ pdev->dev.power.power_state = state; ++ return 0; ++} ++ ++static int gxfb_resume(struct pci_dev *pdev) ++{ ++ struct fb_info *info = pci_get_drvdata(pdev); ++ ++ acquire_console_sem(); ++ ++ /* Turn the engine completely on */ ++ ++ if (gxfb_powerup(info)) ++ printk(KERN_ERR "gxfb: Powerup failed\n"); ++ ++ fb_set_suspend(info, 0); ++ release_console_sem(); ++ ++ pdev->dev.power.power_state = PMSG_ON; ++ return 0; ++} ++#endif ++ ++static int __init gxfb_probe(struct pci_dev *pdev, ++ const struct pci_device_id *id) + { + struct geodefb_par *par; +- struct fb_info *info; + int ret; + unsigned long val; + +- info = gxfb_init_fbinfo(&pdev->dev); +- if (!info) ++ struct fb_videomode *modedb_ptr; ++ int modedb_size; ++ ++ gxfb_info = gxfb_init_fbinfo(&pdev->dev); ++ if (gxfb_info == NULL) + return -ENOMEM; +- par = info->par; ++ ++ par = gxfb_info->par; + + /* GX display controller and GX video device. */ + par->dc_ops = &gx_dc_ops; + par->vid_ops = &gx_vid_ops; + +- if ((ret = gxfb_map_video_memory(info, pdev)) < 0) { ++ if ((ret = gxfb_map_video_memory(gxfb_info, pdev)) < 0) { + dev_err(&pdev->dev, "failed to map frame buffer or controller registers\n"); + goto err; + } +@@ -333,32 +519,60 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i + else + par->enable_crt = 1; + +- ret = fb_find_mode(&info->var, info, mode_option, +- gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16); ++ /* Get the current dotclock */ ++ ++ par->curdclk = (par->vid_ops->get_dclk) ? par->vid_ops->get_dclk(gxfb_info) : 0; ++ ++ /* We need to determine a display mode right now, so we will ++ * check to see if the DCON was previously detected by the BIOS ++ * and use that to make our mode database decision. ++ */ ++ ++ modedb_ptr = (struct fb_videomode *) gx_modedb; ++ modedb_size = ARRAY_SIZE(gx_modedb); ++ ++#ifdef CONFIG_OLPC ++ if (olpc_has_dcon()) { ++ modedb_ptr = (struct fb_videomode *) gx_dcon_modedb; ++ modedb_size = ARRAY_SIZE(gx_dcon_modedb); ++ } ++#endif ++ ++ ret = fb_find_mode(&gxfb_info->var, gxfb_info, mode_option, ++ modedb_ptr, modedb_size, NULL, 16); ++ + if (ret == 0 || ret == 4) { + dev_err(&pdev->dev, "could not find valid video mode\n"); + ret = -EINVAL; + goto err; + } + ++ /* Clear the screen of garbage, unless noclear was specified, ++ * in which case we assume the user knows what he is doing */ ++ ++ if (!noclear) ++ memset_io(gxfb_info->screen_base, 0, gxfb_info->fix.smem_len); ++ ++ gxfb_check_var(&gxfb_info->var, gxfb_info); ++ gxfb_set_par(gxfb_info); ++ ++ /* We are powered up */ ++ par->state = FB_POWER_STATE_ON; + +- /* Clear the frame buffer of garbage. */ +- memset_io(info->screen_base, 0, info->fix.smem_len); + +- gxfb_check_var(&info->var, info); +- gxfb_set_par(info); ++ console_event_register(&gxfb_console_notifier); + +- if (register_framebuffer(info) < 0) { ++ if (register_framebuffer(gxfb_info) < 0) { + ret = -EINVAL; + goto err; + } +- pci_set_drvdata(pdev, info); +- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id); ++ pci_set_drvdata(pdev, gxfb_info); ++ printk(KERN_INFO "fb%d: %s frame buffer device\n", gxfb_info->node, gxfb_info->fix.id); + return 0; + + err: +- if (info->screen_base) { +- iounmap(info->screen_base); ++ if (gxfb_info->screen_base) { ++ iounmap(gxfb_info->screen_base); + pci_release_region(pdev, 0); + } + if (par->vid_regs) { +@@ -370,8 +584,9 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i + pci_release_region(pdev, 2); + } + +- if (info) +- framebuffer_release(info); ++ if (gxfb_info) ++ framebuffer_release(gxfb_info); ++ + return ret; + } + +@@ -397,9 +612,7 @@ static void gxfb_remove(struct pci_dev *pdev) + } + + static struct pci_device_id gxfb_id_table[] = { +- { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO, +- PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16, +- 0xff0000, 0 }, ++ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO) }, + { 0, } + }; + +@@ -410,22 +623,30 @@ static struct pci_driver gxfb_driver = { + .id_table = gxfb_id_table, + .probe = gxfb_probe, + .remove = gxfb_remove, ++#ifdef CONFIG_PM ++ .suspend = gxfb_suspend, ++ .resume = gxfb_resume ++#endif + }; + + #ifndef MODULE +-static int __init gxfb_setup(char *options) +-{ ++static int __init gxfb_setup(char *options) { + + char *opt; + + if (!options || !*options) + return 0; + +- while ((opt = strsep(&options, ",")) != NULL) { ++ while((opt = strsep(&options, ",")) != NULL) { + if (!*opt) + continue; + +- mode_option = opt; ++ if (!strncmp(opt, "fbsize:", 7)) ++ fbsize = simple_strtoul(opt+7, NULL, 0); ++ else if (!strcmp(opt, "noclear")) ++ noclear = 1; ++ else ++ mode_option = opt; + } + + return 0; +@@ -444,7 +665,6 @@ static int __init gxfb_init(void) + #endif + return pci_register_driver(&gxfb_driver); + } +- + static void __exit gxfb_cleanup(void) + { + pci_unregister_driver(&gxfb_driver); +@@ -456,5 +676,8 @@ module_exit(gxfb_cleanup); + module_param(mode_option, charp, 0); + MODULE_PARM_DESC(mode_option, "video mode (x[-][@])"); + ++module_param(fbsize, int, 0); ++MODULE_PARM_DESC(fbsize, "video memory size"); ++ + MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX"); + MODULE_LICENSE("GPL"); +diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h +index 6c227f9..5be8a4d 100644 +--- a/drivers/video/geode/lxfb.h ++++ b/drivers/video/geode/lxfb.h +@@ -25,10 +25,23 @@ void lx_set_mode(struct fb_info *); + void lx_get_gamma(struct fb_info *, unsigned int *, int); + void lx_set_gamma(struct fb_info *, unsigned int *, int); + unsigned int lx_framebuffer_size(void); ++int lx_shutdown(struct fb_info *); ++int lx_powerup(struct fb_info *); + int lx_blank_display(struct fb_info *, int); + void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int, + unsigned int, unsigned int); + ++ ++ ++/* ioctl() defines */ ++ ++#define FBIOSGAMMA _IOW('F', 0x20, void *) ++#define FBIOGGAMMA _IOW('F', 0x21, void *) ++ ++/* General definitions */ ++#define LXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */ ++#define LXFB_GAMMA_SIZE (LXFB_GAMMA_DWORDS * sizeof(unsigned int)) ++ + /* MSRS */ + + #define MSR_LX_GLD_CONFIG 0x48002001 +diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/geode/lxfb_core.c +index 5e30b40..c9060ed 100644 +--- a/drivers/video/geode/lxfb_core.c ++++ b/drivers/video/geode/lxfb_core.c +@@ -22,6 +22,7 @@ + #include + #include + #include ++#include + + #include "lxfb.h" + +@@ -35,186 +36,84 @@ static int fbsize; + */ + + const struct fb_videomode geode_modedb[] __initdata = { +- /* 640x480-60 */ +- { NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2, ++ /* 640x480-60 VESA */ ++ { NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2, ++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 640x480-75 VESA */ ++ { NULL, 75, 640, 480, 31746, 120, 16, 16, 01, 64, 3, ++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 640x480-85 VESA */ ++ { NULL, 85, 640, 480, 27777, 80, 56, 25, 01, 56, 3, ++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 800x600-60 VESA */ ++ { NULL, 60, 800, 600, 25000, 88, 40, 23, 01, 128, 4, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x400-70 */ +- { NULL, 70, 640, 400, 39770, 40, 8, 28, 5, 96, 2, +- FB_SYNC_HOR_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-70 */ +- { NULL, 70, 640, 480, 35014, 88, 24, 15, 2, 64, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-72 */ +- { NULL, 72, 640, 480, 32102, 120, 16, 20, 1, 40, 3, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 800x600-75 VESA */ ++ { NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-75 */ +- { NULL, 75, 640, 480, 31746, 120, 16, 16, 1, 64, 3, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 800x600-85 VESA */ ++ { NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-85 */ +- { NULL, 85, 640, 480, 27780, 80, 56, 25, 1, 56, 3, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1024x768-60 VESA */ ++ { NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6, ++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1024x768-75 VESA */ ++ { NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-90 */ +- { NULL, 90, 640, 480, 26392, 96, 32, 22, 1, 64, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-100 */ +- { NULL, 100, 640, 480, 23167, 104, 40, 25, 1, 64, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 640x480-60 */ +- { NULL, 60, 640, 480, 39682, 48, 16, 25, 10, 88, 2, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1024x768-85 VESA */ ++ { NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-56 */ +- { NULL, 56, 800, 600, 27901, 128, 24, 22, 1, 72, 2, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-60 */ +- { NULL, 60, 800, 600, 25131, 72, 32, 23, 1, 136, 4, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-70 */ +- { NULL, 70, 800, 600, 21873, 120, 40, 21, 4, 80, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-72 */ +- { NULL, 72, 800, 600, 20052, 64, 56, 23, 37, 120, 6, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-75 */ +- { NULL, 75, 800, 600, 20202, 160, 16, 21, 1, 80, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-85 */ +- { NULL, 85, 800, 600, 17790, 152, 32, 27, 1, 64, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-90 */ +- { NULL, 90, 800, 600, 16648, 128, 40, 28, 1, 88, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-100 */ +- { NULL, 100, 800, 600, 14667, 136, 48, 27, 1, 88, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 800x600-60 */ +- { NULL, 60, 800, 600, 25131, 88, 40, 23, 1, 128, 4, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x960-60 VESA */ ++ { NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-60 */ +- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x960-85 VESA */ ++ { NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-70 */ +- { NULL, 70, 1024, 768, 13346, 144, 24, 29, 3, 136, 6, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x1024-60 VESA */ ++ { NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-72 */ +- { NULL, 72, 1024, 768, 12702, 168, 56, 29, 4, 112, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-75 */ +- { NULL, 75, 1024, 768, 12703, 176, 16, 28, 1, 96, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-85 */ +- { NULL, 85, 1024, 768, 10581, 208, 48, 36, 1, 96, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-90 */ +- { NULL, 90, 1024, 768, 9981, 176, 64, 37, 1, 112, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-100 */ +- { NULL, 100, 1024, 768, 8825, 184, 72, 42, 1, 112, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1024x768-60 */ +- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x1024-75 VESA */ ++ { NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-60 */ +- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-70 */ +- { NULL, 70, 1152, 864, 10254, 192, 72, 32, 8, 120, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-72 */ +- { NULL, 72, 1152, 864, 9866, 200, 72, 33, 7, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-75 */ +- { NULL, 75, 1152, 864, 9259, 256, 64, 32, 1, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-85 */ +- { NULL, 85, 1152, 864, 8357, 200, 72, 37, 3, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-90 */ +- { NULL, 90, 1152, 864, 7719, 208, 80, 42, 9, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-100 */ +- { NULL, 100, 1152, 864, 6947, 208, 80, 48, 3, 128, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1152x864-60 */ +- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1280x1024-85 VESA */ ++ { NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-60 */ +- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-70 */ +- { NULL, 70, 1280, 1024, 7719, 224, 88, 38, 6, 136, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-72 */ +- { NULL, 72, 1280, 1024, 7490, 224, 88, 39, 7, 136, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-75 */ +- { NULL, 75, 1280, 1024, 7409, 248, 16, 38, 1, 144, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-85 */ +- { NULL, 85, 1280, 1024, 6351, 224, 64, 44, 1, 160, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-90 */ +- { NULL, 90, 1280, 1024, 5791, 240, 96, 51, 12, 144, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-100 */ +- { NULL, 100, 1280, 1024, 5212, 240, 96, 57, 6, 144, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1280x1024-60 */ +- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3, +- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-60 */ ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1600x1200-60 VESA */ + { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-70 */ +- { NULL, 70, 1600, 1200, 5291, 304, 64, 46, 1, 192, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-72 */ +- { NULL, 72, 1600, 1200, 5053, 288, 112, 47, 13, 176, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-75 */ ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1600x1200-75 VESA */ + { NULL, 75, 1600, 1200, 4938, 304, 64, 46, 1, 192, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-85 */ ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1600x1200-85 VESA */ + { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-90 */ +- { NULL, 90, 1600, 1200, 3981, 304, 128, 60, 1, 176, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-100 */ +- { NULL, 100, 1600, 1200, 3563, 304, 128, 67, 1, 176, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1600x1200-60 */ +- { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3, + FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +- FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-60 */ +- { NULL, 60, 1920, 1440, 4273, 344, 128, 56, 1, 208, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-70 */ +- { NULL, 70, 1920, 1440, 3593, 360, 152, 55, 8, 208, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-72 */ +- { NULL, 72, 1920, 1440, 3472, 360, 152, 68, 4, 208, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-75 */ +- { NULL, 75, 1920, 1440, 3367, 352, 144, 56, 1, 224, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, +- /* 1920x1440-85 */ +- { NULL, 85, 1920, 1440, 2929, 368, 152, 68, 1, 216, 3, +- 0, FB_VMODE_NONINTERLACED, 0 }, ++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, ++ /* 1200x900-75 - CRT timings for the OLPC mode */ ++ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3, ++ 0, FB_VMODE_NONINTERLACED, 0 } + }; + ++#ifdef CONFIG_OLPC ++const struct fb_videomode olpc_dcon_modedb[] __initdata = { ++ /* The only mode the DCON has is 1200x900 */ ++ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3, ++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ FB_VMODE_NONINTERLACED, 0 } ++}; ++#endif ++ + static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) + { + if (var->xres > 1920 || var->yres > 1440) +@@ -379,16 +278,55 @@ static int __init lxfb_map_video_memory(struct fb_info *info, + return 0; + } + ++static int lxfb_set_gamma(struct fb_info *info, void * __user data) ++{ ++ unsigned int gamma[LXFB_GAMMA_DWORDS]; ++ ++ if (copy_from_user(gamma, data, LXFB_GAMMA_SIZE)) ++ return -EFAULT; ++ ++ lx_set_gamma(info, gamma, LXFB_GAMMA_SIZE); ++ return 0; ++} ++ ++static int lxfb_get_gamma(struct fb_info *info, void * __user data) ++{ ++ unsigned int gamma[LXFB_GAMMA_DWORDS]; ++ memset(gamma, 0, sizeof(gamma)); ++ ++ lx_get_gamma(info, gamma, LXFB_GAMMA_DWORDS); ++ ++ return copy_to_user(data, gamma, LXFB_GAMMA_SIZE) ? ++ -EFAULT : 0; ++} ++ ++static int lxfb_ioctl( struct fb_info *info, unsigned int cmd, ++ unsigned long arg) ++{ ++ switch(cmd) { ++ case FBIOSGAMMA: ++ return lxfb_set_gamma(info, (void * __user) arg); ++ ++ case FBIOGGAMMA: ++ return lxfb_get_gamma(info, (void * __user) arg); ++ } ++ ++ return -ENOTTY; ++} ++ + static struct fb_ops lxfb_ops = { + .owner = THIS_MODULE, + .fb_check_var = lxfb_check_var, + .fb_set_par = lxfb_set_par, + .fb_setcolreg = lxfb_setcolreg, + .fb_blank = lxfb_blank, ++ .fb_ioctl = lxfb_ioctl, + /* No HW acceleration for now. */ + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, ++ .fb_powerdown = lx_shutdown, ++ .fb_powerup = lx_powerup, + }; + + static struct fb_info * __init lxfb_init_fbinfo(struct device *dev) +@@ -431,6 +369,45 @@ static struct fb_info * __init lxfb_init_fbinfo(struct device *dev) + return info; + } + ++#ifdef CONFIG_PM ++ ++static int lxfb_suspend(struct pci_dev *pdev, pm_message_t state) ++{ ++ struct fb_info *info = pci_get_drvdata(pdev); ++ ++ if (pdev->dev.power.power_state.event == state.event) ++ return 0; ++ ++ if (state.event == PM_EVENT_SUSPEND) { ++ ++ acquire_console_sem(); ++ lx_shutdown(info); ++ fb_set_suspend(info, 1); ++ release_console_sem(); ++ } ++ ++ pdev->dev.power.power_state = state; ++ return 0; ++} ++ ++static int lxfb_resume(struct pci_dev *pdev) ++{ ++ struct fb_info *info = pci_get_drvdata(pdev); ++ ++ acquire_console_sem(); ++ ++ /* Turn the engine completely on */ ++ ++ lx_powerup(info); ++ fb_set_suspend(info, 0); ++ release_console_sem(); ++ ++ pdev->dev.power.power_state = PMSG_ON; ++ return 0; ++} ++ ++#endif ++ + static int __init lxfb_probe(struct pci_dev *pdev, + const struct pci_device_id *id) + { +@@ -467,6 +444,13 @@ static int __init lxfb_probe(struct pci_dev *pdev, + modedb_ptr = (struct fb_videomode *) geode_modedb; + modedb_size = ARRAY_SIZE(geode_modedb); + ++#ifdef CONFIG_OLPC ++ if (olpc_has_dcon()) { ++ modedb_ptr = (struct fb_videomode *) olpc_dcon_modedb; ++ modedb_size = ARRAY_SIZE(olpc_dcon_modedb); ++ } ++#endif ++ + ret = fb_find_mode(&info->var, info, mode_option, + modedb_ptr, modedb_size, NULL, 16); + +@@ -556,6 +540,10 @@ static struct pci_driver lxfb_driver = { + .id_table = lxfb_id_table, + .probe = lxfb_probe, + .remove = lxfb_remove, ++#ifdef CONFIG_PM ++ .suspend = lxfb_suspend, ++ .resume = lxfb_resume ++#endif + }; + + #ifndef MODULE +diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c +index 4fbc99b..47ed9de 100644 +--- a/drivers/video/geode/lxfb_ops.c ++++ b/drivers/video/geode/lxfb_ops.c +@@ -13,9 +13,13 @@ + #include + #include + #include ++#include + + #include "lxfb.h" + ++#define _GEODELX_ ++#include "geode_regs.h" ++ + /* TODO + * Support panel scaling + * Add acceleration +@@ -290,6 +294,19 @@ unsigned int lx_framebuffer_size(void) + { + unsigned int val; + ++#ifdef CONFIG_OLPC ++ if (machine_is_olpc() && !olpc_has_vsa()) { ++ u32 hi,lo; ++ rdmsr(MSR_LX_GLIU0_P2D_RO0, lo, hi); ++ ++ /* Top page number */ ++ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20); ++ val -= (lo & 0x000fffff); /* Subtract bottom page number */ ++ val += 1; /* Adjust page count */ ++ return (val << 12); ++ } ++#endif ++ + /* The frame buffer size is reported by a VSM in VSA II */ + /* Virtual Register Class = 0x02 */ + /* VG_MEM_SIZE (1MB units) = 0x00 */ +@@ -301,6 +318,34 @@ unsigned int lx_framebuffer_size(void) + return (val << 20); + } + ++void lx_set_gamma(struct fb_info *info, unsigned int *gamma, int len) ++{ ++ int i; ++ struct lxfb_par *par = info->par; ++ ++ writel(0, par->df_regs + DF_PAR); ++ ++ /* Sequential writes to the data register will increment the ++ address automatically */ ++ ++ for(i = 0; i < len; i++) ++ writel(gamma[i] & 0xFFFFFF, par->df_regs + DF_PDR); ++ ++ writel(readl(par->df_regs + DF_MISC) & ~DF_MISC_GAM_BYPASS, ++ par->df_regs + DF_MISC); ++} ++ ++void lx_get_gamma(struct fb_info *info, unsigned int *gamma, int len) ++{ ++ int i; ++ struct lxfb_par *par = info->par; ++ ++ writel(0, par->df_regs + DF_PAR); ++ ++ for(i = 0; i < len;i++) ++ gamma[i] = readl(par->df_regs + DF_PDR); ++} ++ + void lx_set_mode(struct fb_info *info) + { + struct lxfb_par *par = info->par; +@@ -313,6 +358,7 @@ void lx_set_mode(struct fb_info *info) + int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal; + + /* Unlock the DC registers */ ++ readl(par->dc_regs + DC_UNLOCK); + writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK); + + lx_graphics_disable(info); +@@ -534,3 +580,285 @@ int lx_blank_display(struct fb_info *info, int blank_mode) + + return 0; + } ++ ++static struct geoderegs saved_regs; ++ ++static void lx_save_regs(struct fb_info *info, struct geoderegs *regs) ++{ ++ struct lxfb_par *par = info->par; ++ int i; ++ ++ /* Wait for the command buffer to empty */ ++ while(!(readl(par->gp_regs + 0x44) & (1 << 4))); ++ ++ rdmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel); ++ rdmsrl(MSR_LX_GLCP_DOTPLL, regs->msr.dotpll); ++ rdmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg); ++ rdmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare); ++ ++ writel(0x4758, par->dc_regs + 0x00); ++ ++ memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE); ++ memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE); ++ memcpy(regs->vp.b, par->df_regs, VP_REG_SIZE); ++ memcpy(regs->fp.b, par->df_regs + VP_FP_START, FP_REG_SIZE); ++ ++ /* Save the palettes */ ++ writel(0, par->dc_regs + 0x70); ++ ++ for(i = 0; i < DC_PAL_SIZE; i++) ++ regs->pal[i] = readl(par->dc_regs + 0x74); ++ ++ writel(0, par->df_regs + 0x38); ++ ++ for(i = 0; i <= 0xFF; i++) ++ regs->gamma[i] = readl(par->df_regs + 0x40); ++} ++ ++static void lx_restore_regs(struct fb_info *info, struct geoderegs *regs) ++{ ++ struct lxfb_par *par = info->par; ++ u32 val, i; ++ ++ /* == DOTPLL == */ ++ ++ lx_set_dotpll((u32) (regs->msr.dotpll >> 32)); ++ ++ /* MSRs */ ++ ++ wrmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg); ++ ++ /* == GP == */ ++ ++ writel(regs->gp.r.dst_offset, par->gp_regs + 0x00); ++ writel(regs->gp.r.src_offset, par->gp_regs + 0x04); ++ writel(regs->gp.r.stride, par->gp_regs + 0x08); ++ writel(regs->gp.r.wid_height, par->gp_regs + 0x0C); ++ writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10); ++ writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14); ++ writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18); ++ writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C); ++ writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20); ++ writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24); ++ writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28); ++ writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C); ++ writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30); ++ writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34); ++ ++ /* Writing to these registers would cause a blt to happen */ ++ /* 0x38, 0x3c, 0x40 */ ++ ++ /* Status register (0x44) is read only */ ++ ++ writel(regs->gp.r.hst_src, par->gp_regs + 0x48); ++ writel(regs->gp.r.base_offset, par->gp_regs + 0x4c); ++ writel(regs->gp.r.cmd_top, par->gp_regs + 0x50); ++ writel(regs->gp.r.cmd_bot, par->gp_regs + 0x54); ++ writel(regs->gp.r.cmd_read, par->gp_regs + 0x58); ++ writel(regs->gp.r.cmd_write, par->gp_regs + 0x5C); ++ writel(regs->gp.r.ch3_offset, par->gp_regs + 0x60); ++ writel(regs->gp.r.ch3_mode_str, par->gp_regs + 0x64); ++ writel(regs->gp.r.ch3_width, par->gp_regs + 0x6C); ++ writel(regs->gp.r.ch3_hsrc, par->gp_regs + 0x70); ++ ++ /* FIXME: Restore the LUT data here */ ++ ++ writel(regs->gp.r.int_cntrl, par->gp_regs + 0x70); ++ ++ /* == DC == */ ++ ++ /* Write the unlock value */ ++ writel(0x4758, par->dc_regs + 0x00); ++ ++ /* Write the palette data first */ ++ ++ writel(0, par->dc_regs + 0x70); ++ ++ for(i = 0; i < DC_PAL_SIZE; i++) ++ writel(regs->pal[i], par->dc_regs + 0x74); ++ ++ /* MSRs */ ++ wrmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare); ++ ++ /* Write the gcfg register without the enables */ ++ writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04); ++ ++ /* Write the vcfg register without the enables */ ++ writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08); ++ ++ /* Write the rest of the active registers */ ++ writel(regs->dc.r.arb, par->dc_regs + 0x0C); ++ writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10); ++ writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14); ++ writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18); ++ writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C); ++ writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20); ++ writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24); ++ writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28); ++ writel(regs->dc.r.dctop, par->dc_regs + 0x2c); ++ writel(regs->dc.r.line_size, par->dc_regs + 0x30); ++ writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34); ++ writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38); ++ writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40); ++ writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44); ++ writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48); ++ writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50); ++ writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54); ++ writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58); ++ writel(regs->dc.r.fbactive, par->dc_regs + 0x5c); ++ writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60); ++ writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64); ++ writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68); ++ ++ /* Skip register 0x6C (line_cnt), 0x70/0x74 (palette), ++ 0x78 (diagnostic), and 0x7c (diagnostic) ++ */ ++ ++ writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80); ++ writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84); ++ writel(regs->dc.r.dv_ctl, par->dc_regs + 0x88); ++ writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C); ++ ++ writel(regs->dc.r.gfx_scale, par->dc_regs + 0x90); ++ writel(regs->dc.r.irq_filt_ctl, par->dc_regs + 0x94); ++ writel(regs->dc.r.filt_coeff1, par->dc_regs + 0x98); ++ writel(regs->dc.r.filt_coeff2, par->dc_regs + 0x9C); ++ writel(regs->dc.r.vbi_event_ctl, par->dc_regs + 0xA0); ++ ++ writel(regs->dc.r.vbi_odd_ctl, par->dc_regs + 0xA4); ++ writel(regs->dc.r.vbi_hor, par->dc_regs + 0xA8); ++ writel(regs->dc.r.vbi_ln_odd, par->dc_regs + 0xAC); ++ writel(regs->dc.r.vbi_ln_event, par->dc_regs + 0xB0); ++ writel(regs->dc.r.vbi_pitch, par->dc_regs + 0xB4); ++ writel(regs->dc.r.clr_key, par->dc_regs + 0xB8); ++ writel(regs->dc.r.clr_key_mask, par->dc_regs + 0xBC); ++ ++ writel(regs->dc.r.clr_key_x, par->dc_regs + 0xC0); ++ writel(regs->dc.r.clr_key_y, par->dc_regs + 0xC4); ++ writel(regs->dc.r.irq, par->dc_regs + 0xC8); ++ writel(regs->dc.r.genlk_ctrl, par->dc_regs + 0xD4); ++ ++ writel(regs->dc.r.vid_even_y_st_offset, par->dc_regs + 0xD8); ++ writel(regs->dc.r.vid_even_u_st_offset, par->dc_regs + 0xDC); ++ writel(regs->dc.r.vid_even_v_st_offset, par->dc_regs + 0xE0); ++ ++ writel(regs->dc.r.v_active_even_timing, par->dc_regs + 0xE4); ++ writel(regs->dc.r.v_blank_even_timing, par->dc_regs + 0xE8); ++ writel(regs->dc.r.v_sync_even_timing, par->dc_regs + 0xEC); ++ ++ /* == VP == */ ++ ++ /* MSR */ ++ wrmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel); ++ ++ /* Write gamma information first */ ++ ++ writel(0, par->df_regs + 0x38); ++ ++ for(i = 0; i <= 0xFF; i++) ++ writel((u32) regs->gamma[i], par->df_regs + 0x40); ++ ++ /* Don't enable video yet */ ++ writel((u32) regs->vp.r.vcfg & ~0x01, par->df_regs + 0x00); ++ ++ /* Don't enable the CRT yet */ ++ writel((u32) regs->vp.r.dcfg & ~0x0F, par->df_regs + 0x08); ++ ++ /* Write the rest of the VP registers */ ++ ++ writel((u32) regs->vp.r.vx, par->df_regs + 0x10); ++ writel((u32) regs->vp.r.vy, par->df_regs + 0x18); ++ writel((u32) regs->vp.r.vs, par->df_regs + 0x20); ++ writel((u32) regs->vp.r.vck, par->df_regs + 0x28); ++ writel((u32) regs->vp.r.vcm, par->df_regs + 0x30); ++ writel((u32) regs->vp.r.misc, par->df_regs + 0x50); ++ writel((u32) regs->vp.r.ccs, par->df_regs + 0x58); ++ writel((u32) regs->vp.r.vdc, par->df_regs + 0x78); ++ writel((u32) regs->vp.r.vco, par->df_regs + 0x80); ++ writel((u32) regs->vp.r.crc, par->df_regs + 0x88); ++ writel((u32) regs->vp.r.vde, par->df_regs + 0x98); ++ writel((u32) regs->vp.r.cck, par->df_regs + 0xA0); ++ writel((u32) regs->vp.r.ccm, par->df_regs + 0xA8); ++ writel((u32) regs->vp.r.cc1, par->df_regs + 0xB0); ++ writel((u32) regs->vp.r.cc2, par->df_regs + 0xB8); ++ writel((u32) regs->vp.r.a1x, par->df_regs + 0xC0); ++ writel((u32) regs->vp.r.a1y, par->df_regs + 0xC8); ++ writel((u32) regs->vp.r.a1c, par->df_regs + 0xD0); ++ writel((u32) regs->vp.r.a1t, par->df_regs + 0xD8); ++ writel((u32) regs->vp.r.a2x, par->df_regs + 0xE0); ++ writel((u32) regs->vp.r.a2y, par->df_regs + 0xE8); ++ writel((u32) regs->vp.r.a2c, par->df_regs + 0xF0); ++ writel((u32) regs->vp.r.a2t, par->df_regs + 0xF8); ++ writel((u32) regs->vp.r.a3x, par->df_regs + 0x100); ++ writel((u32) regs->vp.r.a3y, par->df_regs + 0x108); ++ writel((u32) regs->vp.r.a3c, par->df_regs + 0x110); ++ writel((u32) regs->vp.r.a3t, par->df_regs + 0x118); ++ writel((u32) regs->vp.r.vrr, par->df_regs + 0x120); ++ ++ writel((u32) regs->vp.r.vye, par->df_regs + 0x138); ++ writel((u32) regs->vp.r.a1ye, par->df_regs + 0x140); ++ writel((u32) regs->vp.r.a2ye, par->df_regs + 0x148); ++ writel((u32) regs->vp.r.a3ye, par->df_regs + 0x150); ++ ++ /* == FP == */ ++ ++ writel((u32) regs->fp.r.pt1, par->df_regs + 0x400); ++ writel((u32) regs->fp.r.pt2, par->df_regs + 0x408); ++ writel((u32) regs->fp.r.dfc, par->df_regs + 0x418); ++ writel(regs->fp.r.dca, par->df_regs + 0x448); ++ writel(regs->fp.r.dmd, par->df_regs + 0x450); ++ writel(regs->fp.r.crc, par->df_regs + 0x458); ++ ++ /* Final enables */ ++ ++ val = readl(par->df_regs + 0x410); ++ ++ /* Control the panel */ ++ if (regs->fp.r.pm & (1 << 24)) { ++ ++ if (!(val & 0x09)) ++ writel(regs->fp.r.pm, par->df_regs + 0x410); ++ } ++ else { ++ if (!(val & 0x05)) ++ writel(regs->fp.r.pm, par->df_regs + 0x410); ++ } ++ ++ /* Turn everything on */ ++ ++ writel(regs->dc.r.gcfg, par->dc_regs + 0x04); ++ writel((u32) regs->vp.r.vcfg, par->df_regs + 0x00); ++ writel((u32) regs->vp.r.dcfg, par->df_regs + 0x08); ++ writel(regs->dc.r.dcfg, par->dc_regs + 0x08); ++} ++ ++static int lx_power_on = 1; ++ ++int lx_shutdown(struct fb_info *info) ++{ ++ struct lxfb_par *par = info->par; ++ ++ if (lx_power_on == 0) ++ return 0; ++ ++ writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK); ++ lx_save_regs(info, &saved_regs); ++ lx_graphics_disable(info); ++ ++ lx_power_on = 0; ++ return 0; ++} ++ ++int lx_powerup(struct fb_info *info) ++{ ++ struct lxfb_par *par = info->par; ++ ++ if (lx_power_on == 1) ++ return 0; ++ ++ lx_restore_regs(info, &saved_regs); ++ writel(0, par->dc_regs + DC_UNLOCK); ++ ++ lx_power_on = 1; ++ return 0; ++} +diff --git a/drivers/video/geode/suspend_gx.c b/drivers/video/geode/suspend_gx.c +new file mode 100644 +index 0000000..43c25be +--- /dev/null ++++ b/drivers/video/geode/suspend_gx.c +@@ -0,0 +1,272 @@ ++#include ++#include ++#include ++ ++#include "geodefb.h" ++#include "video_gx.h" ++ ++void gx_set_dotpll(struct fb_info *info, struct geoderegs *regs) ++{ ++ int timeout = 1000; ++ ++ u64 rstpll, dotpll; ++ ++ rdmsrl(MSR_GLCP_SYS_RSTPLL, rstpll); ++ rdmsrl(MSR_GLCP_DOTPLL, dotpll); ++ ++ dotpll &= 0x00000000ffffffffull; ++ dotpll |= regs->msr.dotpll & 0xffffffff00000000ull; ++ ++ dotpll |= MSR_GLCP_DOTPLL_DOTRESET; ++ dotpll &= ~MSR_GLCP_DOTPLL_BYPASS; ++ ++ wrmsrl(MSR_GLCP_DOTPLL, dotpll); ++ ++ rstpll |= (regs->msr.rstpll & ++ ( MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 | ++ MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 | ++ MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3)); ++ ++ wrmsrl(MSR_GLCP_SYS_RSTPLL, rstpll); ++ dotpll &= ~(MSR_GLCP_DOTPLL_DOTRESET); ++ wrmsrl(MSR_GLCP_DOTPLL, dotpll); ++ ++ do { ++ rdmsrl(MSR_GLCP_DOTPLL, dotpll); ++ } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK)); ++} ++ ++/* FIXME: Make sure nothing is read to clear */ ++ ++void gx_save_regs(struct fb_info *info, struct geoderegs *regs) ++{ ++ struct geodefb_par *par = info->par; ++ int i; ++ ++ /* Wait for the BLT engine to stop being busy */ ++ while(readl(par->gp_regs + 0x44) & 0x05); ++ ++ rdmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel); ++ rdmsrl(MSR_GLCP_DOTPLL, regs->msr.dotpll); ++ rdmsrl(MSR_GLCP_SYS_RSTPLL, regs->msr.rstpll); ++ ++ writel(0x4758, par->dc_regs + 0x00); ++ ++ memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE); ++ memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE); ++ memcpy(regs->vp.b, par->vid_regs, VP_REG_SIZE); ++ memcpy(regs->fp.b, par->vid_regs + 0x400, FP_REG_SIZE); ++ ++ /* Save the palettes */ ++ writel(0, par->dc_regs + 0x70); ++ ++ for(i = 0; i < DC_PAL_SIZE; i++) ++ regs->pal[i] = readl(par->dc_regs + 0x74); ++ ++ writel(0, par->vid_regs + 0x38); ++ ++ for(i = 0; i < 0xFF; i++) ++ regs->gamma[i] = readl(par->vid_regs + 0x40); ++} ++ ++void gx_restore_regs(struct fb_info *info, struct geoderegs *regs) ++{ ++ struct geodefb_par *par = info->par; ++ u32 val, i; ++ ++ /* DOTPLL */ ++ gx_set_dotpll(info, regs); ++ ++ /* GP */ ++ ++ writel(regs->gp.r.dst_offset, par->gp_regs + 0x00); ++ writel(regs->gp.r.src_offset, par->gp_regs + 0x04); ++ writel(regs->gp.r.stride, par->gp_regs + 0x08); ++ writel(regs->gp.r.wid_height, par->gp_regs + 0x0C); ++ writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10); ++ writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14); ++ writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18); ++ writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C); ++ writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20); ++ writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24); ++ writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28); ++ writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C); ++ writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30); ++ writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34); ++ ++ /* Don't write the raster / vector / blt mode regs */ ++ /* status register is read only */ ++ ++ writel(regs->gp.r.hst_src, par->gp_regs + 0x48); ++ writel(regs->gp.r.base_offset, par->gp_regs + 0x4c); ++ ++ /* DC */ ++ ++ /* Write the unlock value */ ++ writel(0x4758, par->dc_regs + 0x00); ++ ++ writel(0, par->dc_regs + 0x70); ++ ++ for(i = 0; i < DC_PAL_SIZE; i++) ++ writel(regs->pal[i], par->dc_regs + 0x74); ++ ++ /* Write the gcfg register without the enables */ ++ writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04); ++ ++ /* Write the vcfg register without the enables */ ++ writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08); ++ ++ /* Write the rest of the active registers */ ++ ++ writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10); ++ writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14); ++ writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18); ++ writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C); ++ writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20); ++ writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24); ++ writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28); ++ writel(regs->dc.r.line_size, par->dc_regs + 0x30); ++ writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34); ++ writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38); ++ writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40); ++ writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44); ++ writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48); ++ writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50); ++ writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54); ++ writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58); ++ writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60); ++ writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64); ++ writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68); ++ ++ /* Don't write the line_cnt or diag registers */ ++ ++ writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80); ++ writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84); ++ writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C); ++ ++ /* VP */ ++ ++ /* MSR */ ++ wrmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel); ++ ++ writel(0, par->vid_regs + 0x38); ++ ++ for(i = 0; i < 0xFF; i++) ++ writel((u32) regs->gamma[i], par->vid_regs + 0x40); ++ ++ /* Don't enable video yet */ ++ writel((u32) regs->vp.r.vcfg & ~0x01, par->vid_regs + 0x00); ++ ++ /* Don't enable the CRT yet */ ++ writel((u32) regs->vp.r.dcfg & ~0x0F, par->vid_regs + 0x08); ++ ++ /* Write the rest of the VP registers */ ++ ++ writel((u32) regs->vp.r.vx, par->vid_regs + 0x10); ++ writel((u32) regs->vp.r.vy, par->vid_regs + 0x18); ++ writel((u32) regs->vp.r.vs, par->vid_regs + 0x20); ++ writel((u32) regs->vp.r.vck, par->vid_regs + 0x28); ++ writel((u32) regs->vp.r.vcm, par->vid_regs + 0x30); ++ writel((u32) regs->vp.r.misc, par->vid_regs + 0x50); ++ writel((u32) regs->vp.r.ccs, par->vid_regs + 0x58); ++ writel((u32) regs->vp.r.vdc, par->vid_regs + 0x78); ++ writel((u32) regs->vp.r.vco, par->vid_regs + 0x80); ++ writel((u32) regs->vp.r.crc, par->vid_regs + 0x88); ++ writel((u32) regs->vp.r.vde, par->vid_regs + 0x98); ++ writel((u32) regs->vp.r.cck, par->vid_regs + 0xA0); ++ writel((u32) regs->vp.r.ccm, par->vid_regs + 0xA8); ++ writel((u32) regs->vp.r.cc1, par->vid_regs + 0xB0); ++ writel((u32) regs->vp.r.cc2, par->vid_regs + 0xB8); ++ writel((u32) regs->vp.r.a1x, par->vid_regs + 0xC0); ++ writel((u32) regs->vp.r.a1y, par->vid_regs + 0xC8); ++ writel((u32) regs->vp.r.a1c, par->vid_regs + 0xD0); ++ writel((u32) regs->vp.r.a1t, par->vid_regs + 0xD8); ++ writel((u32) regs->vp.r.a2x, par->vid_regs + 0xE0); ++ writel((u32) regs->vp.r.a2y, par->vid_regs + 0xE8); ++ writel((u32) regs->vp.r.a2c, par->vid_regs + 0xF0); ++ writel((u32) regs->vp.r.a2t, par->vid_regs + 0xF8); ++ writel((u32) regs->vp.r.a3x, par->vid_regs + 0x100); ++ writel((u32) regs->vp.r.a3y, par->vid_regs + 0x108); ++ writel((u32) regs->vp.r.a3c, par->vid_regs + 0x110); ++ writel((u32) regs->vp.r.a3t, par->vid_regs + 0x118); ++ writel((u32) regs->vp.r.vrr, par->vid_regs + 0x120); ++ ++ ++ /* FP registers */ ++ ++ writel((u32) regs->fp.r.pt1, par->vid_regs + 0x400); ++ writel((u32) regs->fp.r.pt2, par->vid_regs + 0x408); ++ ++ writel((u32) regs->fp.r.dfc, par->vid_regs + 0x418); ++ writel(regs->fp.r.blfsr, par->vid_regs + 0x420); ++ writel(regs->fp.r.rlfsr, par->vid_regs + 0x428); ++ writel(regs->fp.r.fmi, par->vid_regs + 0x430); ++ writel(regs->fp.r.fmd, par->vid_regs + 0x438); ++ writel(regs->fp.r.dca, par->vid_regs + 0x448); ++ writel(regs->fp.r.dmd, par->vid_regs + 0x450); ++ writel(regs->fp.r.crc, par->vid_regs + 0x458); ++ writel(regs->fp.r.fbb, par->vid_regs + 0x460); ++ ++ /* Final enables */ ++ ++ val = readl(par->vid_regs + 0x410); ++ ++ /* Control the panel */ ++ if (regs->fp.r.pm & (1 << 24)) { ++ ++ if (!(val & 0x09)) ++ writel(regs->fp.r.pm, par->vid_regs + 0x410); ++ } ++ else { ++ if (!(val & 0x05)) ++ writel(regs->fp.r.pm, par->vid_regs + 0x410); ++ } ++ ++ /* Turn everything on */ ++ ++ writel(regs->dc.r.gcfg, par->dc_regs + 0x04); ++ writel((u32) regs->vp.r.vcfg, par->vid_regs + 0x00); ++ writel((u32) regs->vp.r.dcfg, par->vid_regs + 0x08); ++ writel(regs->dc.r.dcfg, par->dc_regs + 0x08); ++} ++ ++ ++#ifdef DEBUG ++ ++void dump_regs(struct fb_info *info, int mode) { ++ ++ struct geodefb_par *par = info->par; ++ u32 val; ++ int i; ++ ++ if (mode == 0) { ++ for(i = 0; i < GP_REG_SIZE; i += 4) { ++ val = readl(par->gp_regs + i); ++ } ++ } ++ ++ if (mode == 1) { ++ writel(0x4758, par->dc_regs + 0x00); ++ ++ for(i = 0; i < DC_REG_SIZE; i += 4) { ++ val = readl(par->dc_regs + i); ++ printk("DC%x: %x\n", i, val); ++ } ++ } ++ ++ if (mode == 2) { ++ for(i = 0; i < VP_REG_SIZE; i += 8) { ++ val = readl(par->vid_regs + i); ++ printk("VP%x: %x\n", i, val); ++ } ++ } ++ ++ if (mode == 3) { ++ for(i = 0; i < FP_REG_SIZE; i += 8) { ++ val = readl(par->vid_regs + 0x400 + i); ++ printk("FP%x: %x\n", i, val); ++ } ++ } ++} ++ ++#endif +diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c +index 7f3f18d..e282e74 100644 +--- a/drivers/video/geode/video_gx.c ++++ b/drivers/video/geode/video_gx.c +@@ -16,10 +16,14 @@ + #include + #include + #include ++#include + + #include "geodefb.h" + #include "video_gx.h" ++#include "display_gx.h" + ++/* This structure is used to store the saved registers during suspend */ ++static struct geoderegs gx_saved_regs; + + /* + * Tables of register settings for various DOTCLKs. +@@ -58,7 +62,7 @@ static const struct gx_pll_entry gx_pll_table_48MHz[] = { + { 13888, POSTDIV3, 0x000007E1 }, /* 72.0000 */ + { 13426, PREMULT2, 0x00000F4A }, /* 74.4810 */ + { 13333, 0, 0x00000052 }, /* 75.0000 */ +- { 12698, 0, 0x00000056 }, /* 78.7500 */ ++ { 12698, 0, 0x00000056 }, /* 78.7500 */ + { 12500, POSTDIV3|PREMULT2, 0x00000709 }, /* 80.0000 */ + { 11135, PREMULT2, 0x00000262 }, /* 89.8000 */ + { 10582, 0, 0x000002D2 }, /* 94.5000 */ +@@ -117,8 +121,9 @@ static const struct gx_pll_entry gx_pll_table_14MHz[] = { + { 4357, 0, 0x0000057D }, /* 229.5000 */ + }; + +-static void gx_set_dclk_frequency(struct fb_info *info) ++void gx_set_dclk_frequency(struct fb_info *info) + { ++ struct geodefb_par *par = info->par; + const struct gx_pll_entry *pll_table; + int pll_table_len; + int i, best_i; +@@ -173,115 +178,169 @@ static void gx_set_dclk_frequency(struct fb_info *info) + do { + rdmsrl(MSR_GLCP_DOTPLL, dotpll); + } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK)); ++ ++ par->curdclk = pll_table[best_i].dotpll_value; + } + +-static void +-gx_configure_tft(struct fb_info *info) ++/* Find out the current clock - we will use this information to avoid ++ re-programming it if we don't need to */ ++ ++unsigned int gx_get_dclk(struct fb_info *info) + { +- struct geodefb_par *par = info->par; +- unsigned long val; +- unsigned long fp; ++ const struct gx_pll_entry *pll_table; ++ int pll_table_len; ++ u64 dotpll; ++ int i; + +- /* Set up the DF pad select MSR */ ++ if (cpu_data->x86_mask == 1) { ++ pll_table = gx_pll_table_14MHz; ++ pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz); ++ } else { ++ pll_table = gx_pll_table_48MHz; ++ pll_table_len = ARRAY_SIZE(gx_pll_table_48MHz); ++ } + +- rdmsrl(GX_VP_MSR_PAD_SELECT, val); +- val &= ~GX_VP_PAD_SELECT_MASK; +- val |= GX_VP_PAD_SELECT_TFT; +- wrmsrl(GX_VP_MSR_PAD_SELECT, val); ++ rdmsrl(MSR_GLCP_DOTPLL, dotpll); + +- /* Turn off the panel */ ++ for(i = 0; i < pll_table_len; i++) { ++ if (pll_table[i].dotpll_value == (u32) (dotpll >> 32)) ++ break; ++ } + +- fp = readl(par->vid_regs + GX_FP_PM); +- fp &= ~GX_FP_PM_P; +- writel(fp, par->vid_regs + GX_FP_PM); ++ return (i == pll_table_len) ? 0 : pll_table[i].pixclock; ++} ++ ++ ++#define CMP(val, mask, res) (((val) & (mask)) == (res)) + +- /* Set timing 1 */ ++static void ++gx_configure_tft(struct fb_info *info) { + +- fp = readl(par->vid_regs + GX_FP_PT1); +- fp &= GX_FP_PT1_VSIZE_MASK; +- fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT; +- writel(fp, par->vid_regs + GX_FP_PT1); ++ struct geodefb_par *par = info->par; ++ u32 val, fp = 0, fp1, fp2, sync = 0; + +- /* Timing 2 */ +- /* Set bits that are always on for TFT */ ++ /* Set up the DF pad select MSR */ + +- fp = 0x0F100000; ++ rdmsrl(GX_VP_MSR_PAD_SELECT, val); + +- /* Add sync polarity */ ++ if ((val & GX_VP_PAD_SELECT_MASK) != GX_VP_PAD_SELECT_TFT) { ++ val &= ~GX_VP_PAD_SELECT_MASK; ++ val |= GX_VP_PAD_SELECT_TFT; ++ wrmsrl(GX_VP_MSR_PAD_SELECT, val); ++ } + + if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) +- fp |= GX_FP_PT2_VSP; ++ sync |= GX_FP_PT2_VSP; + + if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) +- fp |= GX_FP_PT2_HSP; ++ sync |= GX_FP_PT2_HSP; + +- writel(fp, par->vid_regs + GX_FP_PT2); ++ /* We only need to turn off the panel if something changed */ + +- /* Set the dither control */ +- writel(0x70, par->vid_regs + GX_FP_DFC); ++ fp1 = readl(par->vid_regs + GX_FP_PT1); ++ fp2 = readl(par->vid_regs + GX_FP_PT2); ++ ++ if (!CMP(fp1, GX_FP_PT1_VSIZE_MASK, info->var.yres << GX_FP_PT1_VSIZE_SHIFT) || ++ (fp2 != (0x0F100000 | sync))) { + +- /* Enable the FP data and power (in case the BIOS didn't) */ ++ /* Turn off the panel */ + +- fp = readl(par->vid_regs + GX_DCFG); +- fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN; +- writel(fp, par->vid_regs + GX_DCFG); ++#ifdef NOTUSED ++ /* Do we really need to turn off the panel? */ ++ /* Possibly - we have a glitch somewhere */ + +- /* Unblank the panel */ ++ fp = readl(par->vid_regs + GX_FP_PM); ++ fp &= ~GX_FP_PM_P; ++ writel(fp, par->vid_regs + GX_FP_PM); ++#endif ++ ++ /* Timing 1 */ ++ fp1 &= GX_FP_PT1_VSIZE_MASK; ++ fp1 |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT; ++ writel(fp, par->vid_regs + GX_FP_PT1); ++ ++ /* Timing 2 */ ++ writel(0x0F100000 | sync, par->vid_regs + GX_FP_PT2); ++ } ++ ++ /* Set the dither control */ ++ if (readl(par->vid_regs + GX_FP_DFC) != 0x70) { ++ writel(0x70, par->vid_regs + GX_FP_DFC); ++ } ++ ++ /* Turn on the panel */ + + fp = readl(par->vid_regs + GX_FP_PM); +- fp |= GX_FP_PM_P; +- writel(fp, par->vid_regs + GX_FP_PM); ++ ++ if (!(fp & 0x09)) ++ writel(fp | GX_FP_PM_P, par->vid_regs + GX_FP_PM); + } + ++#define DCFG_DEFAULT_VAL GX_DCFG_CRT_SYNC_SKW_DFLT | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN | \ ++GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN ++ + static void gx_configure_display(struct fb_info *info) + { + struct geodefb_par *par = info->par; +- u32 dcfg, misc; ++ u32 dcfg, misc, sync = 0; + + /* Set up the MISC register */ +- + misc = readl(par->vid_regs + GX_MISC); + +- /* Power up the DAC */ +- misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); ++ /* We leave gamma enabled if it was already enabled. ++ Although the hardware enables it without setting ++ up the gamma table, the BIOS or bootloader ought ++ to have either disabled it or loaded a table by now */ + +- /* Disable gamma correction */ +- misc |= GX_MISC_GAM_EN; + +- writel(misc, par->vid_regs + GX_MISC); + +- /* Write the display configuration */ +- dcfg = readl(par->vid_regs + GX_DCFG); ++ if (par->enable_crt) { ++ /* Power up the CRT DACs */ ++ if (misc & ( GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN)) { ++ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); ++ writel(misc, par->vid_regs + GX_MISC); ++ } + +- /* Disable hsync and vsync */ +- dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); +- writel(dcfg, par->vid_regs + GX_DCFG); ++ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) ++ sync |= GX_DCFG_CRT_HSYNC_POL; + +- /* Clear bits from existing mode. */ +- dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK +- | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL +- | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); ++ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) ++ sync |= GX_DCFG_CRT_VSYNC_POL; ++ } ++ else { ++ /* Turn off the CRT DACs in FP mode - we don't need them */ ++ if ((misc & (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN))) { ++ misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN); ++ writel(misc, par->vid_regs + GX_MISC); ++ } ++ } + +- /* Set default sync skew. */ +- dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT; ++ /* Write the display configuration */ ++ dcfg = readl(par->vid_regs + GX_DCFG); + +- /* Enable hsync and vsync. */ +- dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN; ++ if (!CMP(dcfg, DCFG_DEFAULT_VAL | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL, ++ DCFG_DEFAULT_VAL | sync)) { + +- /* Sync polarities. */ +- if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) +- dcfg |= GX_DCFG_CRT_HSYNC_POL; +- if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) +- dcfg |= GX_DCFG_CRT_VSYNC_POL; ++ /* Disable hsync and vsync */ ++ dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); ++ writel(dcfg, par->vid_regs + GX_DCFG); + +- /* Enable the display logic */ +- /* Set up the DACS to blank normally */ ++ /* Clear bits from existing mode. */ ++ dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK ++ | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL ++ | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN); + +- dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN; ++ /* Set default sync skew. */ ++ dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT; + +- /* Enable the external DAC VREF? */ ++ /* Enable hsync and vsync. */ ++ dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN; + +- writel(dcfg, par->vid_regs + GX_DCFG); ++ /* Enable the display logic */ ++ dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN; ++ ++ writel(dcfg, par->vid_regs + GX_DCFG); ++ } + + /* Set up the flat panel (if it is enabled) */ + +@@ -289,6 +348,100 @@ static void gx_configure_display(struct fb_info *info) + gx_configure_tft(info); + } + ++int gxfb_powerdown(struct fb_info *info) ++{ ++ struct geodefb_par *par = info->par; ++ ++ /* We're already suspended */ ++ ++ if (par->state != FB_POWER_STATE_ON) ++ return 0; ++ ++ /* Save the registers */ ++ gx_save_regs(info, &gx_saved_regs); ++ ++ /* Shut down the engine */ ++ ++ writel(gx_saved_regs.vp.r.vcfg & ~0x01, par->vid_regs + GX_VCFG); ++ writel(gx_saved_regs.vp.r.dcfg & ~0x0F, par->vid_regs + GX_DCFG); ++ ++ /* Turn off the flat panel unless we are attached to a DCON */ ++ if (!olpc_has_dcon()) ++ writel(gx_saved_regs.fp.r.pm & ~GX_FP_PM_P, par->vid_regs + GX_FP_PM); ++ ++ writel(0x4758, par->dc_regs + DC_UNLOCK); ++ ++ writel(gx_saved_regs.dc.r.gcfg & ~0x0F, ++ par->dc_regs + DC_GENERAL_CFG); ++ ++ writel(gx_saved_regs.dc.r.dcfg & ~0x19, ++ par->dc_regs + DC_DISPLAY_CFG); ++ ++ par->state = FB_POWER_STATE_SUSPEND; ++ ++ return 0; ++} ++ ++int gxfb_powerup(struct fb_info *info) ++{ ++ struct geodefb_par *par = info->par; ++ u32 val; ++ ++ if (par->state == FB_POWER_STATE_SUSPEND) { ++ ++ writel(gx_saved_regs.dc.r.dcfg, ++ par->dc_regs + DC_DISPLAY_CFG); ++ ++ writel(gx_saved_regs.vp.r.vcfg, par->vid_regs + GX_VCFG); ++ writel(gx_saved_regs.vp.r.dcfg, par->vid_regs + GX_DCFG); ++ ++ val = readl(par->vid_regs + GX_FP_PM); ++ ++ /* power up the panel if it needs it; we don't always power it down */ ++ if (!(val & 0x09)) { ++ writel(gx_saved_regs.fp.r.pm, par->vid_regs + GX_FP_PM); ++ mdelay(64); ++ } ++ } ++ ++ /* If the panel is currently on its way up, then wait up to 100ms ++ for it */ ++ ++ if (readl(par->vid_regs + GX_FP_PM) & 0x08) { ++ int i; ++ ++ for(i = 0; i < 10; i++) { ++ if (readl(par->vid_regs + GX_FP_PM) & 0x01) ++ break; ++ ++ mdelay(10); ++ } ++ ++ if (i == 10) ++ printk(KERN_ERR "gxfb: Panel power up timed out\n"); ++ } ++ ++ if (par->state == FB_POWER_STATE_ON) ++ return 0; ++ ++ switch(par->state) { ++ case FB_POWER_STATE_OFF: ++ gx_restore_regs(info, &gx_saved_regs); ++ break; ++ ++ case FB_POWER_STATE_SUSPEND: ++ /* Do this because it will turn on the FIFO which will ++ start the line count */ ++ writel(gx_saved_regs.dc.r.gcfg, ++ par->dc_regs + DC_GENERAL_CFG); ++ writel(0x0, par->dc_regs + DC_UNLOCK); ++ break; ++ } ++ ++ par->state = FB_POWER_STATE_ON; ++ return 0; ++} ++ + static int gx_blank_display(struct fb_info *info, int blank_mode) + { + struct geodefb_par *par = info->par; +@@ -315,6 +468,7 @@ static int gx_blank_display(struct fb_info *info, int blank_mode) + default: + return -EINVAL; + } ++ + dcfg = readl(par->vid_regs + GX_DCFG); + dcfg &= ~(GX_DCFG_DAC_BL_EN + | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN); +@@ -326,7 +480,7 @@ static int gx_blank_display(struct fb_info *info, int blank_mode) + dcfg |= GX_DCFG_VSYNC_EN; + writel(dcfg, par->vid_regs + GX_DCFG); + +- /* Power on/off flat panel. */ ++ /* Power on/off flat panel */ + + if (par->enable_crt == 0) { + fp_pm = readl(par->vid_regs + GX_FP_PM); +@@ -340,8 +494,37 @@ static int gx_blank_display(struct fb_info *info, int blank_mode) + return 0; + } + ++extern struct fb_info *gxfb_info; ++ ++/* This function controls the flatpanel power sequencing - this is used ++ by the OLPC power management engine to enable the FP sequencing much ++ earlier in the resume process ++*/ ++ ++void gxfb_flatpanel_control(int state) ++{ ++ struct geodefb_par *par = gxfb_info->par; ++ u32 val, fp = readl(par->vid_regs + GX_FP_PM); ++ val = fp; ++ ++ /* Turn on the panel if it isn't aleady */ ++ ++ if (state) { ++ if (!(val & 0x01)) ++ val |= GX_FP_PM_P; ++ } ++ else { ++ if (!(val & 0x02)) ++ val &= ~GX_FP_PM_P; ++ } ++ ++ if (val != fp) ++ writel(val, par->vid_regs + GX_FP_PM); ++} ++ + struct geode_vid_ops gx_vid_ops = { + .set_dclk = gx_set_dclk_frequency, ++ .get_dclk = gx_get_dclk, + .configure_display = gx_configure_display, + .blank_display = gx_blank_display, + }; +diff --git a/drivers/video/geode/video_gx.h b/drivers/video/geode/video_gx.h +index ce28d8f..c57b36b 100644 +--- a/drivers/video/geode/video_gx.h ++++ b/drivers/video/geode/video_gx.h +@@ -11,6 +11,8 @@ + #ifndef __VIDEO_GX_H__ + #define __VIDEO_GX_H__ + ++#include "geode_regs.h" ++ + extern struct geode_vid_ops gx_vid_ops; + + /* GX Flatpanel control MSR */ +@@ -20,6 +22,8 @@ extern struct geode_vid_ops gx_vid_ops; + + /* Geode GX video processor registers */ + ++#define GX_VCFG 0x0000 ++ + #define GX_DCFG 0x0008 + # define GX_DCFG_CRT_EN 0x00000001 + # define GX_DCFG_HSYNC_EN 0x00000002 +@@ -42,6 +46,14 @@ extern struct geode_vid_ops gx_vid_ops; + #define GX_MISC_DAC_PWRDN 0x00000400 + #define GX_MISC_A_PWRDN 0x00000800 + ++/* Gamma correction RAM - address and data registers */ ++ ++#define GX_GAR 0x038 ++#define GX_GDR 0x040 ++ ++#define GXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */ ++#define GXFB_GAMMA_SIZE (GXFB_GAMMA_DWORDS * sizeof(unsigned int)) ++ + /* Geode GX flat panel display control registers */ + + #define GX_FP_PT1 0x0400 +@@ -69,4 +81,13 @@ extern struct geode_vid_ops gx_vid_ops; + # define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull) + # define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull) + ++int gxfb_powerdown(struct fb_info *info); ++int gxfb_powerup(struct fb_info *info); ++ ++void gx_set_dclk_frequency(struct fb_info *info); ++unsigned int gx_get_dclk(struct fb_info *info); ++ ++void gx_save_regs(struct fb_info *info, struct geoderegs *regs); ++void gx_restore_regs(struct fb_info *info, struct geoderegs *regs); ++ + #endif /* !__VIDEO_GX_H__ */ +diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c +index 3741ad7..49f6db5 100644 +--- a/drivers/video/modedb.c ++++ b/drivers/video/modedb.c +@@ -33,6 +33,8 @@ const char *global_mode_option; + * Standard video mode definitions (taken from XFree86) + */ + ++#define DEFAULT_MODEDB_INDEX 0 ++ + static const struct fb_videomode modedb[] = { + { + /* 640x400 @ 70 Hz, 31.5 kHz hsync */ +@@ -504,7 +506,8 @@ int fb_find_mode(struct fb_var_screeninfo *var, + } + + if (!default_mode) +- default_mode = &db[0]; ++ default_mode = (db == modedb) ? ++ &modedb[DEFAULT_MODEDB_INDEX] : &db[0]; + + if (!default_bpp) + default_bpp = 8; +diff --git a/drivers/video/olpc_dcon.c b/drivers/video/olpc_dcon.c +new file mode 100644 +index 0000000..d4ef138 +--- /dev/null ++++ b/drivers/video/olpc_dcon.c +@@ -0,0 +1,824 @@ ++/* ++ * Mainly by David Woodhouse, somewhat modified by Jordan Crouse ++ * ++ * Copyright © 2006-2007 Red Hat, Inc. ++ * Copyright © 2006-2007 Advanced Micro Devices, Inc. ++ * ++ * This program is free software. You can redistribute it and/or ++ * modify it under the terms of version 2 of the GNU General Public ++ * License as published by the Free Software Foundation. ++ */ ++ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "olpc_dcon.h" ++ ++/* Module definitions */ ++ ++static int resumeline = 898; ++module_param(resumeline, int, 0444); ++ ++static int noinit; ++module_param(noinit, int, 0444); ++ ++/* Default off since it doesn't work on DCON ASIC in B-test OLPC board */ ++static int useaa = 1; ++module_param(useaa, int, 0444); ++ ++/* I2C structures */ ++ ++static struct i2c_driver dcon_driver; ++static struct i2c_client *dcon_client; ++ ++/* Platform devices */ ++static struct platform_device *dcon_device; ++ ++/* Backlight device */ ++static struct backlight_device *dcon_bl_dev; ++ ++/* Base address of the GPIO registers */ ++static unsigned long gpio_base; ++ ++static struct fb_info *fbinfo; ++ ++/* Current source, initialized at probe time */ ++static int dcon_source; ++ ++/* Desired source */ ++static int dcon_pending; ++ ++/* Current output type */ ++static int dcon_output = DCON_OUTPUT_COLOR; ++ ++/* Current sleep status (not yet implemented) */ ++static int dcon_sleep_val = DCON_ACTIVE; ++ ++/* Shadow register for the DCON_REG_MODE register */ ++static unsigned short dcon_disp_mode; ++ ++/* Variables used during switches */ ++static int dcon_switched; ++ ++static DECLARE_WAIT_QUEUE_HEAD(dcon_wait_queue); ++ ++static unsigned short normal_i2c[] = { 0x0D, I2C_CLIENT_END }; ++I2C_CLIENT_INSMOD; ++ ++#define dcon_write(reg,val) i2c_smbus_write_word_data(dcon_client,reg,val) ++#define dcon_read(reg) i2c_smbus_read_word_data(dcon_client,reg) ++ ++/* The current backlight value - this saves us some smbus traffic */ ++static int bl_val = -1; ++ ++/* ===== API functions - these are called by a variety of users ==== */ ++ ++/* Backlight notes - turning off the backlight enable bit in the DCON ++ * doesn't save us any power over just pushing the BL to zero, so we ++ * don't use that bit in this code. ++ */ ++ ++static int dcon_get_backlight(void) ++{ ++ if (dcon_client == NULL) ++ return 0; ++ ++ if (bl_val == -1) ++ bl_val = dcon_read(DCON_REG_BRIGHT) & 0x0F; ++ ++ return bl_val; ++} ++ ++static void dcon_set_backlight(int level) ++{ ++ if (dcon_client == NULL) ++ return; ++ ++ if (bl_val == (level & 0x0F)) ++ return; ++ ++ bl_val = level & 0x0F; ++ dcon_write(DCON_REG_BRIGHT, bl_val); ++ ++ /* Purposely turn off the backlight when we go to level 0 */ ++ ++ if (bl_val == 0) { ++ dcon_disp_mode &= ~MODE_BL_ENABLE; ++ dcon_write(DCON_REG_MODE, dcon_disp_mode); ++ } ++ else if (!(dcon_disp_mode & MODE_BL_ENABLE)) { ++ dcon_disp_mode |= MODE_BL_ENABLE; ++ dcon_write(DCON_REG_MODE, dcon_disp_mode); ++ } ++} ++ ++/* Set the output type to either color or mono */ ++ ++static int dcon_set_output(int arg) ++{ ++ if (dcon_output == arg) ++ return 0; ++ ++ dcon_output = arg; ++ ++ if (arg == DCON_OUTPUT_MONO) { ++ dcon_disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA); ++ dcon_disp_mode |= MODE_MONO_LUMA; ++ } ++ else { ++ dcon_disp_mode &= ~(MODE_MONO_LUMA); ++ dcon_disp_mode |= MODE_CSWIZZLE; ++ if (useaa) ++ dcon_disp_mode |= MODE_COL_AA; ++ } ++ ++ dcon_write(DCON_REG_MODE, dcon_disp_mode); ++ return 0; ++} ++ ++/* For now, this will be really stupid - we need to address how ++ * DCONLOAD works in a sleep and account for it accordingly ++ */ ++ ++static void dcon_sleep(int state) ++{ ++ /* Turn off the backlight and put the DCON to sleep */ ++ ++ if (state == dcon_sleep_val) ++ return; ++ ++ if (state == DCON_SLEEP) { ++ dcon_disp_mode &= ~MODE_BL_ENABLE; ++ dcon_disp_mode |= MODE_SLEEP; ++ } ++ else { ++ /* Only re-enable the backlight if the backlight value is set */ ++ ++ if (bl_val != 0) ++ dcon_disp_mode |= MODE_BL_ENABLE; ++ ++ dcon_disp_mode &= ~MODE_SLEEP; ++ } ++ ++ dcon_sleep_val = state; ++ dcon_write(DCON_REG_MODE, dcon_disp_mode); ++ ++ /* We should turn off some stuff in the framebuffer - but what? */ ++} ++ ++/* Set the source of the display (CPU or DCON) */ ++ ++static void dcon_source_switch(struct work_struct *work) ++{ ++ DECLARE_WAITQUEUE(wait, current); ++ int source = dcon_pending; ++ ++ if (dcon_source == source) ++ return; ++ ++ dcon_switched = 0; ++ ++ switch (source) { ++ case DCON_SOURCE_CPU: ++ ++ /* Enable the scanline interrupt bit */ ++ if (dcon_write(DCON_REG_MODE, dcon_disp_mode | MODE_SCAN_INT)) ++ printk(KERN_ERR "olpc-dcon: couldn't enable scanline interrupt!\n"); ++ else { ++ /* Wait up to one second for the scanline interrupt */ ++ wait_event_timeout(dcon_wait_queue, dcon_switched == 1, HZ); ++ } ++ ++ if (!dcon_switched) ++ printk(KERN_ERR "olpc-dcon: Timeout entering CPU mode; expect a screen glitch.\n"); ++ ++ /* ++ * Ideally we'd like to disable interrupts here so that the ++ * fb_powerup and DCON turn on happen at a known time value; ++ * however, we can't do that right now with fb_set_suspend ++ * messing with semaphores. ++ * ++ * For now, we just hope.. ++ */ ++ if (fb_powerup(fbinfo)) { ++ printk(KERN_ERR "olpc-dcon: Failed to enter CPU mode\n"); ++ dcon_pending = DCON_SOURCE_DCON; ++ return; ++ } ++ ++ /* And turn off the DCON */ ++ outl(1<<11, gpio_base + GPIOx_OUT_VAL); ++ ++ /* Turn off the scanline interrupt */ ++ if (dcon_write(DCON_REG_MODE, dcon_disp_mode)) ++ printk(KERN_ERR "olpc-dcon: couldn't disable scanline interrupt!\n"); ++ ++ printk(KERN_INFO "olpc-dcon: The CPU has control\n"); ++ break; ++ case DCON_SOURCE_DCON: ++ { ++ int t; ++ ++ add_wait_queue(&dcon_wait_queue, &wait); ++ set_current_state(TASK_UNINTERRUPTIBLE); ++ ++ /* Clear GPIO11 (DCONLOAD) - this implies that the DCON is in ++ control */ ++ ++ outl(1 << (11 + 16), gpio_base + GPIOx_OUT_VAL); ++ ++ t = schedule_timeout(HZ/2); ++ remove_wait_queue(&dcon_wait_queue, &wait); ++ set_current_state(TASK_RUNNING); ++ ++ if (!dcon_switched) ++ printk(KERN_ERR "olpc-dcon: Timeout entering DCON mode; expect a screen glitch.\n"); ++ ++ /* Turn off the graphics engine completely */ ++ fb_powerdown(fbinfo); ++ ++ printk(KERN_INFO "olpc-dcon: The DCON has control\n"); ++ break; ++ } ++ default: ++ BUG(); ++ } ++ ++ dcon_source = source; ++} ++ ++static DECLARE_WORK(dcon_work, dcon_source_switch); ++ ++static int dcon_set_source(int arg) ++{ ++ if (arg != DCON_SOURCE_CPU && arg != DCON_SOURCE_DCON) ++ return -EINVAL; ++ ++ if (dcon_pending == arg) ++ return 0; ++ ++ dcon_pending = arg; ++ if ((dcon_source != arg) && !work_pending(&dcon_work)) ++ schedule_work(&dcon_work); ++ ++ return 0; ++} ++ ++static int dcon_set_source_sync(int arg) ++{ ++ int ret = dcon_set_source(arg); ++ if (!ret) ++ flush_scheduled_work(); ++ return ret; ++} ++ ++static int dconbl_set(struct backlight_device *dev) { ++ ++ int level = dev->props.brightness; ++ ++ if (dev->props.power != FB_BLANK_UNBLANK) ++ level = 0; ++ ++ dcon_set_backlight(level); ++ return 0; ++} ++ ++static int dconbl_get(struct backlight_device *dev) { ++ return dcon_get_backlight(); ++} ++ ++static ssize_t dcon_mode_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%4.4X\n", dcon_disp_mode); ++} ++ ++static ssize_t dcon_sleep_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%d\n", dcon_sleep_val); ++} ++ ++static ssize_t /* __deprecated */ dcon_source_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n"); ++ return sprintf(buf, "%d\n", dcon_source); ++} ++ ++static ssize_t dcon_freeze_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%d\n", dcon_source == DCON_SOURCE_DCON ? 1 : 0); ++} ++ ++static ssize_t dcon_output_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%d\n", dcon_output); ++} ++ ++static ssize_t dcon_resumeline_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%d\n", resumeline); ++} ++ ++static int _strtoul(const char *buf, int len, unsigned int *val) ++{ ++ ++ char *endp; ++ unsigned int output = simple_strtoul(buf, &endp, 0); ++ int size = endp - buf; ++ ++ if (*endp && isspace(*endp)) ++ size++; ++ ++ if (size != len) ++ return -EINVAL; ++ ++ *val = output; ++ return 0; ++} ++ ++static ssize_t dcon_output_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ int output; ++ int rc = -EINVAL; ++ ++ if (_strtoul(buf, count, &output)) ++ return -EINVAL; ++ ++ if (output == DCON_OUTPUT_COLOR || output == DCON_OUTPUT_MONO) { ++ dcon_set_output(output); ++ rc = count; ++ } ++ ++ return rc; ++} ++ ++static ssize_t /* __deprecated */ dcon_source_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ int output; ++ int rc = -EINVAL; ++ ++ printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n"); ++ if (_strtoul(buf, count, &output)) ++ return -EINVAL; ++ ++ dcon_set_source(output); ++ rc = count; ++ ++ return rc; ++} ++ ++static ssize_t dcon_freeze_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ int output; ++ int rc = -EINVAL; ++ ++ if (_strtoul(buf, count, &output)) ++ return rc; ++ ++ dcon_set_source(output ? DCON_SOURCE_DCON : DCON_SOURCE_CPU); ++ rc = count; ++ ++ return rc; ++} ++ ++static ssize_t dcon_resumeline_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ int rl; ++ int rc = -EINVAL; ++ ++ if (_strtoul(buf, count, &rl)) ++ return rc; ++ ++ resumeline = rl; ++ dcon_write(DCON_REG_SCAN_INT, resumeline); ++ rc = count; ++ ++ return rc; ++} ++ ++static ssize_t dcon_sleep_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ int output; ++ ++ if (_strtoul(buf, count, &output)) ++ return -EINVAL; ++ ++ dcon_sleep(output ? DCON_SLEEP : DCON_ACTIVE); ++ return count; ++} ++ ++static struct device_attribute dcon_device_files[] = { ++ __ATTR(mode, 0444, dcon_mode_show, NULL), ++ __ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store), ++ __ATTR(source, 0644, dcon_source_show, dcon_source_store), ++ __ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store), ++ __ATTR(output, 0644, dcon_output_show, dcon_output_store), ++ __ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store), ++}; ++ ++static struct backlight_ops dcon_bl_ops = { ++ .get_brightness = dconbl_get, ++ .update_status = dconbl_set ++}; ++ ++/* List of GPIOs that we care about: ++ (in) GPIO12 -- DCONBLNK ++ (in) GPIO[56] -- DCONSTAT[01] ++ (out) GPIO11 -- DCONLOAD ++*/ ++ ++#define IN_GPIOS ((1<<5) | (1<<6) | (1<<7) | (1<<12)) ++#define OUT_GPIOS (1<<11) ++ ++static irqreturn_t dcon_interrupt(int, void *); ++ ++static int dcon_request_irq(void) ++{ ++ unsigned long lo, hi; ++ unsigned char lob; ++ ++ rdmsr(MSR_LBAR_GPIO, lo, hi); ++ ++ /* Check the mask and whether GPIO is enabled (sanity check) */ ++ if (hi != 0x0000f001) { ++ printk(KERN_ERR "GPIO not enabled -- cannot use DCON\n"); ++ return -ENODEV; ++ } ++ ++ /* Mask off the IO base address */ ++ gpio_base = lo & 0x0000ff00; ++ ++ /* Turn off the event enable for GPIO7 just to be safe */ ++ outl(1 << (16+7), gpio_base + GPIOx_EVNT_EN); ++ ++ /* Set the directions for the GPIO pins */ ++ outl(OUT_GPIOS | (IN_GPIOS << 16), gpio_base + GPIOx_OUT_EN); ++ outl(IN_GPIOS | (OUT_GPIOS << 16), gpio_base + GPIOx_IN_EN); ++ ++ /* Set up the interrupt mappings */ ++ ++ /* Set the IRQ to pair 2 */ ++ geode_gpio_event_irq(OLPC_GPIO_DCON_IRQ, 2); ++ ++ /* Enable group 2 to trigger the DCON interrupt */ ++ geode_gpio_set_irq(2, DCON_IRQ); ++ ++ /* Select edge level for interrupt (in PIC) */ ++ ++ lob = inb(0x4d0); ++ lob &= ~(1 << DCON_IRQ); ++ outb(lob, 0x4d0); ++ ++ /* Register the interupt handler */ ++ if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver)) ++ return -EIO; ++ ++ /* Clear INV_EN for GPIO7 (DCONIRQ) */ ++ outl((1<<(16+7)), gpio_base + GPIOx_INV_EN); ++ ++ /* Enable filter for GPIO12 (DCONBLANK) */ ++ outl(1<<(12), gpio_base + GPIOx_IN_FLTR_EN); ++ ++ /* Disable filter for GPIO7 */ ++ outl(1<<(16+7), gpio_base + GPIOx_IN_FLTR_EN); ++ ++ /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ ++ ++ outl(1<<(16+7), gpio_base + GPIOx_EVNTCNT_EN); ++ outl(1<<(16+12), gpio_base + GPIOx_EVNTCNT_EN); ++ ++ /* Add GPIO12 to the Filter Event Pair #7 */ ++ outb(12, gpio_base + GPIO_FE7_SEL); ++ ++ /* Turn off negative Edge Enable for GPIO12 */ ++ outl(1<<(16+12), gpio_base + GPIOx_NEGEDGE_EN); ++ ++ /* Enable negative Edge Enable for GPIO7 */ ++ outl(1<<7, gpio_base + GPIOx_NEGEDGE_EN); ++ ++ /* Zero the filter amount for Filter Event Pair #7 */ ++ outw(0, gpio_base + GPIO_FLT7_AMNT); ++ ++ /* Clear the negative edge status for GPIO7 and GPIO12 */ ++ outl((1<<7) | (1<<12), gpio_base+0x4c); ++ ++ /* FIXME: Clear the posiitive status as well, just to be sure */ ++ outl((1<<7) | (1<<12), gpio_base+0x48); ++ ++ /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ ++ outl((1<<(7))|(1<<12), gpio_base + GPIOx_EVNT_EN); ++ ++ /* Determine the current state by reading the GPIO bit */ ++ /* Earlier stages of the boot process have established the state */ ++ dcon_source = inl(gpio_base + GPIOx_OUT_VAL) & (1<<11) ++ ? DCON_SOURCE_CPU ++ : DCON_SOURCE_DCON; ++ dcon_pending = dcon_source; ++ ++ return 0; ++} ++ ++static int dcon_reboot_notify(struct notifier_block *nb, unsigned long foo, void *bar) ++{ ++ if (dcon_client == NULL) ++ return 0; ++ ++ /* Turn off the DCON. Entirely. */ ++ dcon_write(DCON_REG_MODE, 0x39); ++ dcon_write(DCON_REG_MODE, 0x32); ++ return 0; ++} ++ ++static int dcon_conswitch_notify(struct notifier_block *nb, ++ unsigned long mode, void *dummy) ++{ ++ if (mode == CONSOLE_EVENT_SWITCH_TEXT) ++ dcon_sleep(DCON_ACTIVE); ++ ++ return 0; ++} ++ ++static struct notifier_block dcon_nb = { ++ .notifier_call = dcon_reboot_notify, ++ .priority = -1, ++}; ++ ++static struct notifier_block dcon_console_nb = { ++ .notifier_call = dcon_conswitch_notify, ++ .priority = -1, ++}; ++ ++static int dcon_probe(struct i2c_adapter *adap, int addr, int kind) ++{ ++ struct i2c_client *client; ++ uint16_t ver; ++ int rc, i; ++ ++ if (!olpc_has_dcon()) { ++ printk("olpc-dcon: No DCON is attached.\n"); ++ return -ENODEV; ++ } ++ ++ if (num_registered_fb >= 1) ++ fbinfo = registered_fb[0]; ++ ++ if (adap->id != I2C_HW_SMBUS_SCX200) { ++ printk(KERN_ERR "olpc-dcon: Invalid I2C bus (%d not %d)\n", ++ adap->id, I2C_HW_SMBUS_SCX200); ++ return -ENXIO; ++ } ++ ++ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); ++ if (client == NULL) ++ return -ENOMEM; ++ ++ strncpy(client->name, "OLPC-DCON", I2C_NAME_SIZE); ++ client->addr = addr; ++ client->adapter = adap; ++ client->driver = &dcon_driver; ++ ++ if ((rc = i2c_attach_client(client)) != 0) { ++ printk(KERN_ERR "olpc-dcon: Unable to attach the I2C client.\n"); ++ goto eclient; ++ } ++ ++ ver = i2c_smbus_read_word_data(client, DCON_REG_ID); ++ ++ if ((ver >> 8) != 0xDC) { ++ printk(KERN_ERR "olpc-dcon: DCON ID not 0xDCxx: 0x%04x instead.\n", ver); ++ rc = -ENXIO; ++ goto ei2c; ++ } ++ ++ if ((rc = dcon_request_irq())) { ++ printk(KERN_ERR "olpc-dcon: Unable to grab IRQ.\n"); ++ goto ei2c; ++ } ++ ++ if (ver < 0xdc02 && !noinit) { ++ /* Initialize the DCON registers */ ++ ++ /* Start with work-arounds for DCON ASIC */ ++ i2c_smbus_write_word_data(client, 0x4b, 0x00cc); ++ i2c_smbus_write_word_data(client, 0x4b, 0x00cc); ++ i2c_smbus_write_word_data(client, 0x4b, 0x00cc); ++ i2c_smbus_write_word_data(client, 0x0b, 0x007a); ++ i2c_smbus_write_word_data(client, 0x36, 0x025c); ++ i2c_smbus_write_word_data(client, 0x37, 0x025e); ++ ++ /* Initialise SDRAM */ ++ ++ i2c_smbus_write_word_data(client, 0x3b, 0x002b); ++ i2c_smbus_write_word_data(client, 0x41, 0x0101); ++ i2c_smbus_write_word_data(client, 0x42, 0x0101); ++ } ++ ++ /* Colour swizzle, AA, no passthrough, backlight */ ++ ++ dcon_disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE | MODE_CSWIZZLE; ++ if (useaa) ++ dcon_disp_mode |= MODE_COL_AA; ++ i2c_smbus_write_word_data(client, DCON_REG_MODE, dcon_disp_mode); ++ ++ ++ /* Set the scanline to interrupt on during resume */ ++ ++ i2c_smbus_write_word_data(client, DCON_REG_SCAN_INT, resumeline); ++ ++ /* Add the DCON device */ ++ ++ dcon_device = platform_device_alloc("dcon", -1); ++ ++ if (dcon_device == NULL) { ++ printk(KERN_ERR "dcon: Unable to create the DCON device\n"); ++ rc = -ENOMEM; ++ goto eirq; ++ } ++ ++ if ((rc = platform_device_add(dcon_device))) { ++ printk(KERN_ERR "dcon: Unable to add the DCON device\n"); ++ goto edev; ++ } ++ ++ for(i = 0; i < ARRAY_SIZE(dcon_device_files); i++) ++ device_create_file(&dcon_device->dev, &dcon_device_files[i]); ++ ++ /* Add the backlight device for the DCON */ ++ ++ dcon_client = client; ++ ++ dcon_bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev, ++ NULL, &dcon_bl_ops); ++ ++ if (IS_ERR(dcon_bl_dev)) { ++ printk(KERN_INFO "Could not register the backlight device for the DCON (%ld)\n", PTR_ERR(dcon_bl_dev)); ++ dcon_bl_dev = NULL; ++ } ++ else { ++ dcon_bl_dev->props.max_brightness = 15; ++ dcon_bl_dev->props.power = FB_BLANK_UNBLANK; ++ dcon_bl_dev->props.brightness = dcon_get_backlight(); ++ ++ backlight_update_status(dcon_bl_dev); ++ } ++ ++ register_reboot_notifier(&dcon_nb); ++ console_event_register(&dcon_console_nb); ++ ++ printk(KERN_INFO "olpc-dcon: Discovered DCON version %x\n", ver & 0xFF); ++ ++ return 0; ++ ++ edev: ++ platform_device_unregister(dcon_device); ++ dcon_device = NULL; ++ eirq: ++ free_irq(DCON_IRQ, &dcon_driver); ++ ei2c: ++ i2c_detach_client(client); ++ eclient: ++ kfree(client); ++ ++ return rc; ++} ++ ++static int dcon_attach(struct i2c_adapter *adap) ++{ ++ int ret; ++ ++ ret = i2c_probe(adap, &addr_data, dcon_probe); ++ ++ if (dcon_client == NULL) ++ printk(KERN_ERR "olpc-dcon: No DCON found on SMBus\n"); ++ ++ return ret; ++} ++ ++static int dcon_detach(struct i2c_client *client) ++{ ++ int rc; ++ dcon_client = NULL; ++ ++ unregister_reboot_notifier(&dcon_nb); ++ console_event_unregister(&dcon_console_nb); ++ ++ free_irq(DCON_IRQ, &dcon_driver); ++ ++ if ((rc = i2c_detach_client(client)) == 0) ++ kfree(i2c_get_clientdata(client)); ++ ++ if (dcon_bl_dev != NULL) ++ backlight_device_unregister(dcon_bl_dev); ++ ++ if (dcon_device != NULL) ++ platform_device_unregister(dcon_device); ++ cancel_work_sync(&dcon_work); ++ ++ return rc; ++} ++ ++ ++#ifdef CONFIG_PM ++static int dcon_suspend(struct i2c_client *client, pm_message_t state) ++{ ++ if (dcon_sleep_val != DCON_ACTIVE) ++ return 0; ++ ++ /* Set up the DCON to have the source */ ++ return dcon_set_source_sync(DCON_SOURCE_DCON); ++} ++ ++static int dcon_resume(struct i2c_client *client) ++{ ++ int x; ++ if (dcon_sleep_val != DCON_ACTIVE) ++ return 0; ++ ++ /* HACK: ensure the bus is stable */ ++ do { ++ x = dcon_read(DCON_REG_ID); ++ } while (x < 0); ++ ++ return dcon_set_source(DCON_SOURCE_CPU); ++} ++ ++#endif ++ ++static irqreturn_t dcon_interrupt(int irq, void *id) ++{ ++ int status = inl(gpio_base + GPIOx_READ_BACK) >> 5; ++ ++ /* Clear the negative edge status for GPIO7 */ ++ outl(1 << 7, gpio_base + GPIOx_NEGEDGE_STS); ++ ++ switch (status & 3) { ++ case 3: ++ printk(KERN_DEBUG "olpc-dcon: DCONLOAD_MISSED interrupt\n"); ++ break; ++ case 2: /* switch to DCON mode */ ++ case 1: /* switch to CPU mode */ ++ dcon_switched = 1; ++ wake_up(&dcon_wait_queue); ++ break; ++ case 0: ++ printk(KERN_DEBUG "olpc-dcon: scanline interrupt w/CPU\n"); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static struct i2c_driver dcon_driver = { ++ .driver = { ++ .name = "OLPC-DCON", ++ }, ++ .id = I2C_DRIVERID_DCON, ++ .attach_adapter = dcon_attach, ++ .detach_client = dcon_detach, ++#ifdef CONFIG_PM ++ .suspend = dcon_suspend, ++ .resume = dcon_resume, ++#endif ++}; ++ ++ ++static int __init olpc_dcon_init(void) ++{ ++ i2c_add_driver(&dcon_driver); ++ return 0; ++} ++ ++static void __exit olpc_dcon_exit(void) ++{ ++ i2c_del_driver(&dcon_driver); ++} ++ ++module_init(olpc_dcon_init); ++module_exit(olpc_dcon_exit); ++ ++MODULE_LICENSE("GPL"); +diff --git a/drivers/video/olpc_dcon.h b/drivers/video/olpc_dcon.h +new file mode 100644 +index 0000000..6453ca4 +--- /dev/null ++++ b/drivers/video/olpc_dcon.h +@@ -0,0 +1,75 @@ ++#ifndef OLPC_DCON_H_ ++#define OLPC_DCON_H_ ++ ++/* DCON registers */ ++ ++#define DCON_REG_ID 0 ++#define DCON_REG_MODE 1 ++ ++#define MODE_PASSTHRU (1<<0) ++#define MODE_SLEEP (1<<1) ++#define MODE_SLEEP_AUTO (1<<2) ++#define MODE_BL_ENABLE (1<<3) ++#define MODE_BLANK (1<<4) ++#define MODE_CSWIZZLE (1<<5) ++#define MODE_COL_AA (1<<6) ++#define MODE_MONO_LUMA (1<<7) ++#define MODE_SCAN_INT (1<<8) ++#define MODE_CLOCKDIV (1<<9) ++#define MODE_DEBUG (1<<14) ++#define MODE_SELFTEST (1<<15) ++ ++#define DCON_REG_HRES 2 ++#define DCON_REG_HTOTAL 3 ++#define DCON_REG_HSYNC_WIDTH 4 ++#define DCON_REG_VRES 5 ++#define DCON_REG_VTOTAL 6 ++#define DCON_REG_VSYNC_WIDTH 7 ++#define DCON_REG_TIMEOUT 8 ++#define DCON_REG_SCAN_INT 9 ++#define DCON_REG_BRIGHT 10 ++ ++/* GPIO registers (CS5536) */ ++ ++#define MSR_LBAR_GPIO 0x5140000C ++ ++#define GPIOx_OUT_VAL 0x00 ++#define GPIOx_OUT_EN 0x04 ++#define GPIOx_IN_EN 0x20 ++#define GPIOx_INV_EN 0x24 ++#define GPIOx_IN_FLTR_EN 0x28 ++#define GPIOx_EVNTCNT_EN 0x2C ++#define GPIOx_READ_BACK 0x30 ++#define GPIOx_EVNT_EN 0x38 ++#define GPIOx_NEGEDGE_EN 0x44 ++#define GPIOx_NEGEDGE_STS 0x4C ++#define GPIO_FLT7_AMNT 0xD8 ++#define GPIO_MAP_X 0xE0 ++#define GPIO_MAP_Y 0xE4 ++#define GPIO_FE7_SEL 0xF7 ++ ++ ++/* Status values */ ++ ++#define DCONSTAT_SCANINT 0 ++#define DCONSTAT_SCANINT_DCON 1 ++#define DCONSTAT_DISPLAYLOAD 2 ++#define DCONSTAT_MISSED 3 ++ ++/* Source values */ ++ ++#define DCON_SOURCE_DCON 0 ++#define DCON_SOURCE_CPU 1 ++ ++/* Output values */ ++#define DCON_OUTPUT_COLOR 0 ++#define DCON_OUTPUT_MONO 1 ++ ++/* Sleep values */ ++#define DCON_ACTIVE 0 ++#define DCON_SLEEP 1 ++ ++/* Interrupt */ ++#define DCON_IRQ 6 ++ ++#endif +diff --git a/fs/Kconfig b/fs/Kconfig +index f9eed6d..6fa3ea2 100644 +--- a/fs/Kconfig ++++ b/fs/Kconfig +@@ -999,6 +999,23 @@ config HUGETLBFS + config HUGETLB_PAGE + def_bool HUGETLBFS + ++config PROMFS_FS ++ tristate "PromFS IEEE 1275 file system support" ++ depends on SPARC || PPC || OLPC ++ help ++ PromFS is a file system interface to various IEEE-1275 compatible ++ firmwares. If you have such a firmware (Sparc64, PowerPC, and ++ some other architectures and embedded systems have such firmwares, ++ with names like "OpenBoot (tm)" and "OpenFirmware"), say Y here ++ to be able to access the firmware's device-tree from Linux. ++ ++ The firmware device-tree is available as a virtual file system, ++ can be mounted under /prom with the command "mount -t promfs ++ none /prom". ++ ++ To compile PromFS support as a module, choose M here; the module ++ will be called promfs. If unsure, choose M. ++ + config RAMFS + bool + default y +@@ -1225,6 +1242,14 @@ config JFFS2_FS_WRITEBUFFER + - NOR flash with transparent ECC + - DataFlash + ++config JFFS2_FS_WBUF_VERIFY ++ bool "Verify JFFS2 write-buffer reads" ++ depends on JFFS2_FS_WRITEBUFFER ++ default n ++ help ++ This causes JFFS2 to read back every page written through the ++ write-buffer, and check for errors. ++ + config JFFS2_SUMMARY + bool "JFFS2 summary support (EXPERIMENTAL)" + depends on JFFS2_FS && EXPERIMENTAL +@@ -1295,52 +1320,52 @@ config JFFS2_ZLIB + select ZLIB_DEFLATE + depends on JFFS2_FS + default y +- help +- Zlib is designed to be a free, general-purpose, legally unencumbered, +- lossless data-compression library for use on virtually any computer +- hardware and operating system. See for +- further information. ++ help ++ Zlib is designed to be a free, general-purpose, legally unencumbered, ++ lossless data-compression library for use on virtually any computer ++ hardware and operating system. See for ++ further information. + +- Say 'Y' if unsure. ++ Say 'Y' if unsure. + + config JFFS2_RTIME + bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS + depends on JFFS2_FS + default y +- help +- Rtime does manage to recompress already-compressed data. Say 'Y' if unsure. ++ help ++ Rtime does manage to recompress already-compressed data. Say 'Y' if unsure. + + config JFFS2_RUBIN + bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS + depends on JFFS2_FS + default n +- help +- RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure. ++ help ++ RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure. + + choice +- prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS +- default JFFS2_CMODE_PRIORITY +- depends on JFFS2_FS +- help +- You can set here the default compression mode of JFFS2 from +- the available compression modes. Don't touch if unsure. ++ prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS ++ default JFFS2_CMODE_PRIORITY ++ depends on JFFS2_FS ++ help ++ You can set here the default compression mode of JFFS2 from ++ the available compression modes. Don't touch if unsure. + + config JFFS2_CMODE_NONE +- bool "no compression" +- help +- Uses no compression. ++ bool "no compression" ++ help ++ Uses no compression. + + config JFFS2_CMODE_PRIORITY +- bool "priority" +- help +- Tries the compressors in a predefined order and chooses the first +- successful one. ++ bool "priority" ++ help ++ Tries the compressors in a predefined order and chooses the first ++ successful one. + + config JFFS2_CMODE_SIZE +- bool "size (EXPERIMENTAL)" +- help +- Tries all compressors and chooses the one which has the smallest +- result. ++ bool "size (EXPERIMENTAL)" ++ help ++ Tries all compressors and chooses the one which has the smallest ++ result. + + endchoice + +diff --git a/fs/Makefile b/fs/Makefile +index 720c29d..61f1a4d 100644 +--- a/fs/Makefile ++++ b/fs/Makefile +@@ -108,6 +108,7 @@ obj-$(CONFIG_ADFS_FS) += adfs/ + obj-$(CONFIG_FUSE_FS) += fuse/ + obj-$(CONFIG_UDF_FS) += udf/ + obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/ ++obj-$(CONFIG_PROMFS_FS) += promfs/ + obj-$(CONFIG_JFS_FS) += jfs/ + obj-$(CONFIG_XFS_FS) += xfs/ + obj-$(CONFIG_9P_FS) += 9p/ +diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c +index 504643f..d568ae8 100644 +--- a/fs/jffs2/background.c ++++ b/fs/jffs2/background.c +@@ -23,8 +23,8 @@ static int jffs2_garbage_collect_thread(void *); + void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c) + { + spin_lock(&c->erase_completion_lock); +- if (c->gc_task && jffs2_thread_should_wake(c)) +- send_sig(SIGHUP, c->gc_task, 1); ++ if (c->gc_task && jffs2_thread_should_wake(c)) ++ send_sig(SIGHUP, c->gc_task, 1); + spin_unlock(&c->erase_completion_lock); + } + +diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c +index 485d065..d90ca05 100644 +--- a/fs/jffs2/compr.c ++++ b/fs/jffs2/compr.c +@@ -5,7 +5,7 @@ + * Created by Arjan van de Ven + * + * Copyright © 2004 Ferenc Havasi , +- * University of Szeged, Hungary ++ * University of Szeged, Hungary + * + * For licensing information, see the file 'LICENCE' in this directory. + * +@@ -43,121 +43,122 @@ static uint32_t none_stat_compr_blocks=0,none_stat_decompr_blocks=0,none_stat_co + * *datalen accordingly to show the amount of data which were compressed. + */ + uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, +- unsigned char *data_in, unsigned char **cpage_out, +- uint32_t *datalen, uint32_t *cdatalen) ++ unsigned char *data_in, unsigned char **cpage_out, ++ uint32_t *datalen, uint32_t *cdatalen) + { + int ret = JFFS2_COMPR_NONE; +- int compr_ret; +- struct jffs2_compressor *this, *best=NULL; +- unsigned char *output_buf = NULL, *tmp_buf; +- uint32_t orig_slen, orig_dlen; +- uint32_t best_slen=0, best_dlen=0; ++ int compr_ret; ++ struct jffs2_compressor *this, *best=NULL; ++ unsigned char *output_buf = NULL, *tmp_buf; ++ uint32_t orig_slen, orig_dlen; ++ uint32_t best_slen=0, best_dlen=0; + +- switch (jffs2_compression_mode) { +- case JFFS2_COMPR_MODE_NONE: +- break; +- case JFFS2_COMPR_MODE_PRIORITY: +- output_buf = kmalloc(*cdatalen,GFP_KERNEL); +- if (!output_buf) { +- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n"); +- goto out; +- } +- orig_slen = *datalen; +- orig_dlen = *cdatalen; +- spin_lock(&jffs2_compressor_list_lock); +- list_for_each_entry(this, &jffs2_compressor_list, list) { +- /* Skip decompress-only backwards-compatibility and disabled modules */ +- if ((!this->compress)||(this->disabled)) +- continue; ++ switch (jffs2_compression_mode) { ++ case JFFS2_COMPR_MODE_NONE: ++ break; ++ case JFFS2_COMPR_MODE_PRIORITY: ++ output_buf = kmalloc(*cdatalen,GFP_KERNEL); ++ if (!output_buf) { ++ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n"); ++ goto out; ++ } ++ orig_slen = *datalen; ++ orig_dlen = *cdatalen; ++ spin_lock(&jffs2_compressor_list_lock); ++ list_for_each_entry(this, &jffs2_compressor_list, list) { ++ /* Skip decompress-only backwards-compatibility and disabled modules */ ++ if ((!this->compress)||(this->disabled)) ++ continue; + +- this->usecount++; +- spin_unlock(&jffs2_compressor_list_lock); +- *datalen = orig_slen; +- *cdatalen = orig_dlen; +- compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL); +- spin_lock(&jffs2_compressor_list_lock); +- this->usecount--; +- if (!compr_ret) { +- ret = this->compr; +- this->stat_compr_blocks++; +- this->stat_compr_orig_size += *datalen; +- this->stat_compr_new_size += *cdatalen; +- break; +- } +- } +- spin_unlock(&jffs2_compressor_list_lock); +- if (ret == JFFS2_COMPR_NONE) kfree(output_buf); +- break; +- case JFFS2_COMPR_MODE_SIZE: +- orig_slen = *datalen; +- orig_dlen = *cdatalen; +- spin_lock(&jffs2_compressor_list_lock); +- list_for_each_entry(this, &jffs2_compressor_list, list) { +- /* Skip decompress-only backwards-compatibility and disabled modules */ +- if ((!this->compress)||(this->disabled)) +- continue; +- /* Allocating memory for output buffer if necessary */ +- if ((this->compr_buf_sizecompr_buf)) { +- spin_unlock(&jffs2_compressor_list_lock); +- kfree(this->compr_buf); +- spin_lock(&jffs2_compressor_list_lock); +- this->compr_buf_size=0; +- this->compr_buf=NULL; +- } +- if (!this->compr_buf) { +- spin_unlock(&jffs2_compressor_list_lock); +- tmp_buf = kmalloc(orig_dlen,GFP_KERNEL); +- spin_lock(&jffs2_compressor_list_lock); +- if (!tmp_buf) { +- printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen); +- continue; +- } +- else { +- this->compr_buf = tmp_buf; +- this->compr_buf_size = orig_dlen; +- } +- } +- this->usecount++; +- spin_unlock(&jffs2_compressor_list_lock); +- *datalen = orig_slen; +- *cdatalen = orig_dlen; +- compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL); +- spin_lock(&jffs2_compressor_list_lock); +- this->usecount--; +- if (!compr_ret) { +- if ((!best_dlen)||(best_dlen>*cdatalen)) { +- best_dlen = *cdatalen; +- best_slen = *datalen; +- best = this; +- } +- } +- } +- if (best_dlen) { +- *cdatalen = best_dlen; +- *datalen = best_slen; +- output_buf = best->compr_buf; +- best->compr_buf = NULL; +- best->compr_buf_size = 0; +- best->stat_compr_blocks++; +- best->stat_compr_orig_size += best_slen; +- best->stat_compr_new_size += best_dlen; +- ret = best->compr; +- } +- spin_unlock(&jffs2_compressor_list_lock); +- break; +- default: +- printk(KERN_ERR "JFFS2: unknow compression mode.\n"); +- } ++ this->usecount++; ++ spin_unlock(&jffs2_compressor_list_lock); ++ *datalen = orig_slen; ++ *cdatalen = orig_dlen; ++ compr_ret = this->compress(data_in, output_buf, datalen, cdatalen, NULL); ++ spin_lock(&jffs2_compressor_list_lock); ++ this->usecount--; ++ if (!compr_ret) { ++ ret = this->compr; ++ this->stat_compr_blocks++; ++ this->stat_compr_orig_size += *datalen; ++ this->stat_compr_new_size += *cdatalen; ++ break; ++ } ++ } ++ spin_unlock(&jffs2_compressor_list_lock); ++ if (ret == JFFS2_COMPR_NONE) ++ kfree(output_buf); ++ break; ++ case JFFS2_COMPR_MODE_SIZE: ++ orig_slen = *datalen; ++ orig_dlen = *cdatalen; ++ spin_lock(&jffs2_compressor_list_lock); ++ list_for_each_entry(this, &jffs2_compressor_list, list) { ++ /* Skip decompress-only backwards-compatibility and disabled modules */ ++ if ((!this->compress)||(this->disabled)) ++ continue; ++ /* Allocating memory for output buffer if necessary */ ++ if ((this->compr_buf_sizecompr_buf)) { ++ spin_unlock(&jffs2_compressor_list_lock); ++ kfree(this->compr_buf); ++ spin_lock(&jffs2_compressor_list_lock); ++ this->compr_buf_size=0; ++ this->compr_buf=NULL; ++ } ++ if (!this->compr_buf) { ++ spin_unlock(&jffs2_compressor_list_lock); ++ tmp_buf = kmalloc(orig_dlen,GFP_KERNEL); ++ spin_lock(&jffs2_compressor_list_lock); ++ if (!tmp_buf) { ++ printk(KERN_WARNING "JFFS2: No memory for compressor allocation. (%d bytes)\n",orig_dlen); ++ continue; ++ } ++ else { ++ this->compr_buf = tmp_buf; ++ this->compr_buf_size = orig_dlen; ++ } ++ } ++ this->usecount++; ++ spin_unlock(&jffs2_compressor_list_lock); ++ *datalen = orig_slen; ++ *cdatalen = orig_dlen; ++ compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen, NULL); ++ spin_lock(&jffs2_compressor_list_lock); ++ this->usecount--; ++ if (!compr_ret) { ++ if ((!best_dlen)||(best_dlen>*cdatalen)) { ++ best_dlen = *cdatalen; ++ best_slen = *datalen; ++ best = this; ++ } ++ } ++ } ++ if (best_dlen) { ++ *cdatalen = best_dlen; ++ *datalen = best_slen; ++ output_buf = best->compr_buf; ++ best->compr_buf = NULL; ++ best->compr_buf_size = 0; ++ best->stat_compr_blocks++; ++ best->stat_compr_orig_size += best_slen; ++ best->stat_compr_new_size += best_dlen; ++ ret = best->compr; ++ } ++ spin_unlock(&jffs2_compressor_list_lock); ++ break; ++ default: ++ printk(KERN_ERR "JFFS2: unknow compression mode.\n"); ++ } + out: +- if (ret == JFFS2_COMPR_NONE) { +- *cpage_out = data_in; +- *datalen = *cdatalen; +- none_stat_compr_blocks++; +- none_stat_compr_size += *datalen; +- } +- else { +- *cpage_out = output_buf; +- } ++ if (ret == JFFS2_COMPR_NONE) { ++ *cpage_out = data_in; ++ *datalen = *cdatalen; ++ none_stat_compr_blocks++; ++ none_stat_compr_size += *datalen; ++ } ++ else { ++ *cpage_out = output_buf; ++ } + return ret; + } + +@@ -165,8 +166,8 @@ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, + uint16_t comprtype, unsigned char *cdata_in, + unsigned char *data_out, uint32_t cdatalen, uint32_t datalen) + { +- struct jffs2_compressor *this; +- int ret; ++ struct jffs2_compressor *this; ++ int ret; + + /* Older code had a bug where it would write non-zero 'usercompr' + fields. Deal with it. */ +@@ -177,32 +178,32 @@ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, + case JFFS2_COMPR_NONE: + /* This should be special-cased elsewhere, but we might as well deal with it */ + memcpy(data_out, cdata_in, datalen); +- none_stat_decompr_blocks++; ++ none_stat_decompr_blocks++; + break; + case JFFS2_COMPR_ZERO: + memset(data_out, 0, datalen); + break; + default: +- spin_lock(&jffs2_compressor_list_lock); +- list_for_each_entry(this, &jffs2_compressor_list, list) { +- if (comprtype == this->compr) { +- this->usecount++; +- spin_unlock(&jffs2_compressor_list_lock); +- ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL); +- spin_lock(&jffs2_compressor_list_lock); +- if (ret) { +- printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret); +- } +- else { +- this->stat_decompr_blocks++; +- } +- this->usecount--; +- spin_unlock(&jffs2_compressor_list_lock); +- return ret; +- } +- } ++ spin_lock(&jffs2_compressor_list_lock); ++ list_for_each_entry(this, &jffs2_compressor_list, list) { ++ if (comprtype == this->compr) { ++ this->usecount++; ++ spin_unlock(&jffs2_compressor_list_lock); ++ ret = this->decompress(cdata_in, data_out, cdatalen, datalen, NULL); ++ spin_lock(&jffs2_compressor_list_lock); ++ if (ret) { ++ printk(KERN_WARNING "Decompressor \"%s\" returned %d\n", this->name, ret); ++ } ++ else { ++ this->stat_decompr_blocks++; ++ } ++ this->usecount--; ++ spin_unlock(&jffs2_compressor_list_lock); ++ return ret; ++ } ++ } + printk(KERN_WARNING "JFFS2 compression type 0x%02x not available.\n", comprtype); +- spin_unlock(&jffs2_compressor_list_lock); ++ spin_unlock(&jffs2_compressor_list_lock); + return -EIO; + } + return 0; +@@ -210,108 +211,108 @@ int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, + + int jffs2_register_compressor(struct jffs2_compressor *comp) + { +- struct jffs2_compressor *this; ++ struct jffs2_compressor *this; + +- if (!comp->name) { +- printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n"); +- return -1; +- } +- comp->compr_buf_size=0; +- comp->compr_buf=NULL; +- comp->usecount=0; +- comp->stat_compr_orig_size=0; +- comp->stat_compr_new_size=0; +- comp->stat_compr_blocks=0; +- comp->stat_decompr_blocks=0; +- D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name)); ++ if (!comp->name) { ++ printk(KERN_WARNING "NULL compressor name at registering JFFS2 compressor. Failed.\n"); ++ return -1; ++ } ++ comp->compr_buf_size=0; ++ comp->compr_buf=NULL; ++ comp->usecount=0; ++ comp->stat_compr_orig_size=0; ++ comp->stat_compr_new_size=0; ++ comp->stat_compr_blocks=0; ++ comp->stat_decompr_blocks=0; ++ D1(printk(KERN_DEBUG "Registering JFFS2 compressor \"%s\"\n", comp->name)); + +- spin_lock(&jffs2_compressor_list_lock); ++ spin_lock(&jffs2_compressor_list_lock); + +- list_for_each_entry(this, &jffs2_compressor_list, list) { +- if (this->priority < comp->priority) { +- list_add(&comp->list, this->list.prev); +- goto out; +- } +- } +- list_add_tail(&comp->list, &jffs2_compressor_list); ++ list_for_each_entry(this, &jffs2_compressor_list, list) { ++ if (this->priority < comp->priority) { ++ list_add(&comp->list, this->list.prev); ++ goto out; ++ } ++ } ++ list_add_tail(&comp->list, &jffs2_compressor_list); + out: +- D2(list_for_each_entry(this, &jffs2_compressor_list, list) { +- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); +- }) ++ D2(list_for_each_entry(this, &jffs2_compressor_list, list) { ++ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); ++ }) + +- spin_unlock(&jffs2_compressor_list_lock); ++ spin_unlock(&jffs2_compressor_list_lock); + +- return 0; ++ return 0; + } + + int jffs2_unregister_compressor(struct jffs2_compressor *comp) + { +- D2(struct jffs2_compressor *this;) ++ D2(struct jffs2_compressor *this;) + +- D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name)); ++ D1(printk(KERN_DEBUG "Unregistering JFFS2 compressor \"%s\"\n", comp->name)); + +- spin_lock(&jffs2_compressor_list_lock); ++ spin_lock(&jffs2_compressor_list_lock); + +- if (comp->usecount) { +- spin_unlock(&jffs2_compressor_list_lock); +- printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n"); +- return -1; +- } +- list_del(&comp->list); ++ if (comp->usecount) { ++ spin_unlock(&jffs2_compressor_list_lock); ++ printk(KERN_WARNING "JFFS2: Compressor modul is in use. Unregister failed.\n"); ++ return -1; ++ } ++ list_del(&comp->list); + +- D2(list_for_each_entry(this, &jffs2_compressor_list, list) { +- printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); +- }) +- spin_unlock(&jffs2_compressor_list_lock); +- return 0; ++ D2(list_for_each_entry(this, &jffs2_compressor_list, list) { ++ printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); ++ }) ++ spin_unlock(&jffs2_compressor_list_lock); ++ return 0; + } + + void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig) + { +- if (orig != comprbuf) +- kfree(comprbuf); ++ if (orig != comprbuf) ++ kfree(comprbuf); + } + + int __init jffs2_compressors_init(void) + { + /* Registering compressors */ + #ifdef CONFIG_JFFS2_ZLIB +- jffs2_zlib_init(); ++ jffs2_zlib_init(); + #endif + #ifdef CONFIG_JFFS2_RTIME +- jffs2_rtime_init(); ++ jffs2_rtime_init(); + #endif + #ifdef CONFIG_JFFS2_RUBIN +- jffs2_rubinmips_init(); +- jffs2_dynrubin_init(); ++ jffs2_rubinmips_init(); ++ jffs2_dynrubin_init(); + #endif + /* Setting default compression mode */ + #ifdef CONFIG_JFFS2_CMODE_NONE +- jffs2_compression_mode = JFFS2_COMPR_MODE_NONE; +- D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");) ++ jffs2_compression_mode = JFFS2_COMPR_MODE_NONE; ++ D1(printk(KERN_INFO "JFFS2: default compression mode: none\n");) + #else + #ifdef CONFIG_JFFS2_CMODE_SIZE +- jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE; +- D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");) ++ jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE; ++ D1(printk(KERN_INFO "JFFS2: default compression mode: size\n");) + #else +- D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");) ++ D1(printk(KERN_INFO "JFFS2: default compression mode: priority\n");) + #endif + #endif +- return 0; ++ return 0; + } + + int jffs2_compressors_exit(void) + { + /* Unregistering compressors */ + #ifdef CONFIG_JFFS2_RUBIN +- jffs2_dynrubin_exit(); +- jffs2_rubinmips_exit(); ++ jffs2_dynrubin_exit(); ++ jffs2_rubinmips_exit(); + #endif + #ifdef CONFIG_JFFS2_RTIME +- jffs2_rtime_exit(); ++ jffs2_rtime_exit(); + #endif + #ifdef CONFIG_JFFS2_ZLIB +- jffs2_zlib_exit(); ++ jffs2_zlib_exit(); + #endif +- return 0; ++ return 0; + } +diff --git a/fs/jffs2/compr.h b/fs/jffs2/compr.h +index 68cc701..1070275 100644 +--- a/fs/jffs2/compr.h ++++ b/fs/jffs2/compr.h +@@ -2,7 +2,7 @@ + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright © 2004 Ferenc Havasi , +- * University of Szeged, Hungary ++ * University of Szeged, Hungary + * + * For licensing information, see the file 'LICENCE' in this directory. + * +@@ -32,29 +32,29 @@ + #define JFFS2_ZLIB_PRIORITY 60 + + #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */ +-#define JFFS2_DYNRUBIN_DISABLED /* for decompression */ ++#define JFFS2_DYNRUBIN_DISABLED /* for decompression */ + + #define JFFS2_COMPR_MODE_NONE 0 + #define JFFS2_COMPR_MODE_PRIORITY 1 + #define JFFS2_COMPR_MODE_SIZE 2 + + struct jffs2_compressor { +- struct list_head list; +- int priority; /* used by prirority comr. mode */ +- char *name; +- char compr; /* JFFS2_COMPR_XXX */ +- int (*compress)(unsigned char *data_in, unsigned char *cpage_out, +- uint32_t *srclen, uint32_t *destlen, void *model); +- int (*decompress)(unsigned char *cdata_in, unsigned char *data_out, +- uint32_t cdatalen, uint32_t datalen, void *model); +- int usecount; +- int disabled; /* if seted the compressor won't compress */ +- unsigned char *compr_buf; /* used by size compr. mode */ +- uint32_t compr_buf_size; /* used by size compr. mode */ +- uint32_t stat_compr_orig_size; +- uint32_t stat_compr_new_size; +- uint32_t stat_compr_blocks; +- uint32_t stat_decompr_blocks; ++ struct list_head list; ++ int priority; /* used by prirority comr. mode */ ++ char *name; ++ char compr; /* JFFS2_COMPR_XXX */ ++ int (*compress)(unsigned char *data_in, unsigned char *cpage_out, ++ uint32_t *srclen, uint32_t *destlen, void *model); ++ int (*decompress)(unsigned char *cdata_in, unsigned char *data_out, ++ uint32_t cdatalen, uint32_t datalen, void *model); ++ int usecount; ++ int disabled; /* if set the compressor won't compress */ ++ unsigned char *compr_buf; /* used by size compr. mode */ ++ uint32_t compr_buf_size; /* used by size compr. mode */ ++ uint32_t stat_compr_orig_size; ++ uint32_t stat_compr_new_size; ++ uint32_t stat_compr_blocks; ++ uint32_t stat_decompr_blocks; + }; + + int jffs2_register_compressor(struct jffs2_compressor *comp); +@@ -64,12 +64,12 @@ int jffs2_compressors_init(void); + int jffs2_compressors_exit(void); + + uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, +- unsigned char *data_in, unsigned char **cpage_out, +- uint32_t *datalen, uint32_t *cdatalen); ++ unsigned char *data_in, unsigned char **cpage_out, ++ uint32_t *datalen, uint32_t *cdatalen); + + int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, +- uint16_t comprtype, unsigned char *cdata_in, +- unsigned char *data_out, uint32_t cdatalen, uint32_t datalen); ++ uint16_t comprtype, unsigned char *cdata_in, ++ unsigned char *data_out, uint32_t cdatalen, uint32_t datalen); + + void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig); + +diff --git a/fs/jffs2/compr_rtime.c b/fs/jffs2/compr_rtime.c +index 0d0bfd2..546d153 100644 +--- a/fs/jffs2/compr_rtime.c ++++ b/fs/jffs2/compr_rtime.c +@@ -104,7 +104,7 @@ static int jffs2_rtime_decompress(unsigned char *data_in, + } + } + } +- return 0; ++ return 0; + } + + static struct jffs2_compressor jffs2_rtime_comp = { +diff --git a/fs/jffs2/compr_rubin.c b/fs/jffs2/compr_rubin.c +index ea0431e..c73fa89 100644 +--- a/fs/jffs2/compr_rubin.c ++++ b/fs/jffs2/compr_rubin.c +@@ -384,7 +384,7 @@ static int jffs2_rubinmips_decompress(unsigned char *data_in, + void *model) + { + rubin_do_decompress(BIT_DIVIDER_MIPS, bits_mips, data_in, cpage_out, sourcelen, dstlen); +- return 0; ++ return 0; + } + + static int jffs2_dynrubin_decompress(unsigned char *data_in, +@@ -399,7 +399,7 @@ static int jffs2_dynrubin_decompress(unsigned char *data_in, + bits[c] = data_in[c]; + + rubin_do_decompress(256, bits, data_in+8, cpage_out, sourcelen-8, dstlen); +- return 0; ++ return 0; + } + + static struct jffs2_compressor jffs2_rubinmips_comp = { +diff --git a/fs/jffs2/compr_zlib.c b/fs/jffs2/compr_zlib.c +index 2b87fcc..cfd301a 100644 +--- a/fs/jffs2/compr_zlib.c ++++ b/fs/jffs2/compr_zlib.c +@@ -181,7 +181,7 @@ static int jffs2_zlib_decompress(unsigned char *data_in, + } + zlib_inflateEnd(&inf_strm); + mutex_unlock(&inflate_mutex); +- return 0; ++ return 0; + } + + static struct jffs2_compressor jffs2_zlib_comp = { +@@ -203,11 +203,11 @@ int __init jffs2_zlib_init(void) + + ret = alloc_workspaces(); + if (ret) +- return ret; ++ return ret; + + ret = jffs2_register_compressor(&jffs2_zlib_comp); + if (ret) +- free_workspaces(); ++ free_workspaces(); + + return ret; + } +diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c +index c1dfca3..d293a1f 100644 +--- a/fs/jffs2/dir.c ++++ b/fs/jffs2/dir.c +@@ -32,7 +32,7 @@ static int jffs2_mkdir (struct inode *,struct dentry *,int); + static int jffs2_rmdir (struct inode *,struct dentry *); + static int jffs2_mknod (struct inode *,struct dentry *,int,dev_t); + static int jffs2_rename (struct inode *, struct dentry *, +- struct inode *, struct dentry *); ++ struct inode *, struct dentry *); + + const struct file_operations jffs2_dir_operations = + { +@@ -770,7 +770,7 @@ static int jffs2_mknod (struct inode *dir_i, struct dentry *dentry, int mode, de + } + + static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry, +- struct inode *new_dir_i, struct dentry *new_dentry) ++ struct inode *new_dir_i, struct dentry *new_dentry) + { + int ret; + struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb); +diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c +index 66e7c2f..efd83f3 100644 +--- a/fs/jffs2/erase.c ++++ b/fs/jffs2/erase.c +@@ -38,8 +38,8 @@ static void jffs2_erase_block(struct jffs2_sb_info *c, + #ifdef __ECOS + ret = jffs2_flash_erase(c, jeb); + if (!ret) { +- jffs2_erase_succeeded(c, jeb); +- return; ++ jffs2_erase_succeeded(c, jeb); ++ return; + } + bad_offset = jeb->offset; + #else /* Linux */ +@@ -50,12 +50,14 @@ static void jffs2_erase_block(struct jffs2_sb_info *c, + instr = kmalloc(sizeof(struct erase_info) + sizeof(struct erase_priv_struct), GFP_KERNEL); + if (!instr) { + printk(KERN_WARNING "kmalloc for struct erase_info in jffs2_erase_block failed. Refiling block for later\n"); ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + list_move(&jeb->list, &c->erase_pending_list); + c->erasing_size -= c->sector_size; + c->dirty_size += c->sector_size; + jeb->dirty_size = c->sector_size; + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + return; + } + +@@ -82,12 +84,14 @@ static void jffs2_erase_block(struct jffs2_sb_info *c, + if (ret == -ENOMEM || ret == -EAGAIN) { + /* Erase failed immediately. Refile it on the list */ + D1(printk(KERN_DEBUG "Erase at 0x%08x failed: %d. Refiling on erase_pending_list\n", jeb->offset, ret)); ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + list_move(&jeb->list, &c->erase_pending_list); + c->erasing_size -= c->sector_size; + c->dirty_size += c->sector_size; + jeb->dirty_size = c->sector_size; + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + return; + } + +@@ -114,6 +118,7 @@ void jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count) + jeb = list_entry(c->erase_complete_list.next, struct jffs2_eraseblock, list); + list_del(&jeb->list); + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + jffs2_mark_erased_block(c, jeb); + + if (!--count) { +@@ -134,6 +139,7 @@ void jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count) + jffs2_free_jeb_node_refs(c, jeb); + list_add(&jeb->list, &c->erasing_list); + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + + jffs2_erase_block(c, jeb); + +@@ -142,23 +148,25 @@ void jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count) + } + + /* Be nice */ +- cond_resched(); ++ yield(); ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + } + + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + done: + D1(printk(KERN_DEBUG "jffs2_erase_pending_blocks completed\n")); +- +- up(&c->erase_free_sem); + } + + static void jffs2_erase_succeeded(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb) + { + D1(printk(KERN_DEBUG "Erase completed successfully at 0x%08x\n", jeb->offset)); ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + list_move_tail(&jeb->list, &c->erase_complete_list); + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + /* Ensure that kupdated calls us again to mark them clean */ + jffs2_erase_pending_trigger(c); + } +@@ -172,22 +180,26 @@ static void jffs2_erase_failed(struct jffs2_sb_info *c, struct jffs2_eraseblock + failed too many times. */ + if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) { + /* We'd like to give this block another try. */ ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + list_move(&jeb->list, &c->erase_pending_list); + c->erasing_size -= c->sector_size; + c->dirty_size += c->sector_size; + jeb->dirty_size = c->sector_size; + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + return; + } + } + ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + c->erasing_size -= c->sector_size; + c->bad_size += c->sector_size; + list_move(&jeb->list, &c->bad_list); + c->nr_erasing_blocks--; + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + wake_up(&c->erase_wait); + } + +@@ -317,6 +329,33 @@ static int jffs2_block_check_erase(struct jffs2_sb_info *c, struct jffs2_erasebl + size_t retlen; + int ret = -EIO; + ++ if (c->mtd->point) { ++ unsigned long *wordebuf; ++ ++ ret = c->mtd->point(c->mtd, jeb->offset, c->sector_size, &retlen, (unsigned char **)&ebuf); ++ if (ret) { ++ D1(printk(KERN_DEBUG "MTD point failed %d\n", ret)); ++ goto do_flash_read; ++ } ++ if (retlen < c->sector_size) { ++ /* Don't muck about if it won't let us point to the whole erase sector */ ++ D1(printk(KERN_DEBUG "MTD point returned len too short: 0x%zx\n", retlen)); ++ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size); ++ goto do_flash_read; ++ } ++ wordebuf = ebuf-sizeof(*wordebuf); ++ retlen /= sizeof(*wordebuf); ++ do { ++ if (*++wordebuf != ~0) ++ break; ++ } while(--retlen); ++ c->mtd->unpoint(c->mtd, ebuf, jeb->offset, c->sector_size); ++ if (retlen) ++ printk(KERN_WARNING "Newly-erased block contained word 0x%lx at offset 0x%08x\n", ++ *wordebuf, jeb->offset + c->sector_size-retlen*sizeof(*wordebuf)); ++ return 0; ++ } ++ do_flash_read: + ebuf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!ebuf) { + printk(KERN_WARNING "Failed to allocate page buffer for verifying erase at 0x%08x. Refiling\n", jeb->offset); +@@ -417,6 +456,7 @@ static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseb + jffs2_link_node_ref(c, jeb, jeb->offset | REF_NORMAL, c->cleanmarker_size, NULL); + } + ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + c->erasing_size -= c->sector_size; + c->free_size += jeb->free_size; +@@ -429,23 +469,28 @@ static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseb + c->nr_erasing_blocks--; + c->nr_free_blocks++; + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + wake_up(&c->erase_wait); + return; + + filebad: ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + /* Stick it on a list (any list) so erase_failed can take it + right off again. Silly, but shouldn't happen often. */ + list_add(&jeb->list, &c->erasing_list); + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + jffs2_erase_failed(c, jeb, bad_offset); + return; + + refile: + /* Stick it back on the list from whence it came and come back later */ + jffs2_erase_pending_trigger(c); ++ down(&c->erase_free_sem); + spin_lock(&c->erase_completion_lock); + list_add(&jeb->list, &c->erase_complete_list); + spin_unlock(&c->erase_completion_lock); ++ up(&c->erase_free_sem); + return; + } +diff --git a/fs/jffs2/gc.c b/fs/jffs2/gc.c +index 2d99e06..eded819 100644 +--- a/fs/jffs2/gc.c ++++ b/fs/jffs2/gc.c +@@ -556,7 +556,7 @@ static int jffs2_garbage_collect_pristine(struct jffs2_sb_info *c, + + node = kmalloc(rawlen, GFP_KERNEL); + if (!node) +- return -ENOMEM; ++ return -ENOMEM; + + ret = jffs2_flash_read(c, ref_offset(raw), rawlen, &retlen, (char *)node); + if (!ret && retlen != rawlen) +@@ -624,7 +624,7 @@ static int jffs2_garbage_collect_pristine(struct jffs2_sb_info *c, + + if (ret || (retlen != rawlen)) { + printk(KERN_NOTICE "Write of %d bytes at 0x%08x failed. returned %d, retlen %zd\n", +- rawlen, phys_ofs, ret, retlen); ++ rawlen, phys_ofs, ret, retlen); + if (retlen) { + jffs2_add_physical_node_ref(c, phys_ofs | REF_OBSOLETE, rawlen, NULL); + } else { +diff --git a/fs/jffs2/jffs2_fs_sb.h b/fs/jffs2/jffs2_fs_sb.h +index b13298a..ae99cd7 100644 +--- a/fs/jffs2/jffs2_fs_sb.h ++++ b/fs/jffs2/jffs2_fs_sb.h +@@ -106,6 +106,9 @@ struct jffs2_sb_info { + + uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */ + ++#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY ++ unsigned char *wbuf_verify; /* read-back buffer for verification */ ++#endif + #ifdef CONFIG_JFFS2_FS_WRITEBUFFER + unsigned char *wbuf; /* Write-behind buffer for NAND flash */ + uint32_t wbuf_ofs; +diff --git a/fs/jffs2/nodelist.h b/fs/jffs2/nodelist.h +index bc5509f..8b4955a 100644 +--- a/fs/jffs2/nodelist.h ++++ b/fs/jffs2/nodelist.h +@@ -127,7 +127,7 @@ static inline struct jffs2_inode_cache *jffs2_raw_ref_to_ic(struct jffs2_raw_nod + return ((struct jffs2_inode_cache *)raw); + } + +- /* flash_offset & 3 always has to be zero, because nodes are ++ /* flash_offset & 3 always has to be zero, because nodes are + always aligned at 4 bytes. So we have a couple of extra bits + to play with, which indicate the node's status; see below: */ + #define REF_UNCHECKED 0 /* We haven't yet checked the CRC or built its inode */ +@@ -197,7 +197,7 @@ struct jffs2_inode_cache { + #define RAWNODE_CLASS_XATTR_DATUM 1 + #define RAWNODE_CLASS_XATTR_REF 2 + +-#define INOCACHE_HASHSIZE 128 ++#define INOCACHE_HASHSIZE 1024 + + #define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size) + +diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c +index dbc908a..5b49bff 100644 +--- a/fs/jffs2/nodemgmt.c ++++ b/fs/jffs2/nodemgmt.c +@@ -154,7 +154,7 @@ int jffs2_reserve_space_gc(struct jffs2_sb_info *c, uint32_t minsize, + while(ret == -EAGAIN) { + ret = jffs2_do_reserve_space(c, minsize, len, sumsize); + if (ret) { +- D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret)); ++ D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret)); + } + } + spin_unlock(&c->erase_completion_lock); +@@ -423,7 +423,12 @@ struct jffs2_raw_node_ref *jffs2_add_physical_node_ref(struct jffs2_sb_info *c, + even after refiling c->nextblock */ + if ((c->nextblock || ((ofs & 3) != REF_OBSOLETE)) + && (jeb != c->nextblock || (ofs & ~3) != jeb->offset + (c->sector_size - jeb->free_size))) { +- printk(KERN_WARNING "argh. node added in wrong place\n"); ++ printk(KERN_WARNING "argh. node added in wrong place at 0x%08x(%d)\n", ofs & ~3, ofs & 3); ++ if (c->nextblock) ++ printk(KERN_WARNING "nextblock 0x%08x", c->nextblock->offset); ++ else ++ printk(KERN_WARNING "No nextblock"); ++ printk(", expected at %08x\n", jeb->offset + (c->sector_size - jeb->free_size)); + return ERR_PTR(-EINVAL); + } + #endif +diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c +index b5baa35..8d4319c 100644 +--- a/fs/jffs2/readinode.c ++++ b/fs/jffs2/readinode.c +@@ -211,7 +211,7 @@ static void jffs2_kill_tn(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info * + * ordering. + * + * Returns 0 if the node was handled (including marking it obsolete) +- * < 0 an if error occurred ++ * < 0 an if error occurred + */ + static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c, + struct jffs2_readinode_info *rii, +@@ -862,8 +862,8 @@ static inline int read_unknown(struct jffs2_sb_info *c, struct jffs2_raw_node_re + JFFS2_ERROR("REF_UNCHECKED but unknown node at %#08x\n", + ref_offset(ref)); + JFFS2_ERROR("Node is {%04x,%04x,%08x,%08x}. Please report this error.\n", +- je16_to_cpu(un->magic), je16_to_cpu(un->nodetype), +- je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc)); ++ je16_to_cpu(un->magic), je16_to_cpu(un->nodetype), ++ je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc)); + jffs2_mark_node_obsolete(c, ref); + return 0; + } +diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c +index 6c75cd4..59dd408 100644 +--- a/fs/jffs2/scan.c ++++ b/fs/jffs2/scan.c +@@ -863,7 +863,7 @@ scan_more: + switch (je16_to_cpu(node->nodetype) & JFFS2_COMPAT_MASK) { + case JFFS2_FEATURE_ROCOMPAT: + printk(KERN_NOTICE "Read-only compatible feature node (0x%04x) found at offset 0x%08x\n", je16_to_cpu(node->nodetype), ofs); +- c->flags |= JFFS2_SB_FLAG_RO; ++ c->flags |= JFFS2_SB_FLAG_RO; + if (!(jffs2_is_readonly(c))) + return -EROFS; + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen))))) +diff --git a/fs/jffs2/security.c b/fs/jffs2/security.c +index bc9f6ba..02c39c6 100644 +--- a/fs/jffs2/security.c ++++ b/fs/jffs2/security.c +@@ -38,9 +38,9 @@ int jffs2_init_security(struct inode *inode, struct inode *dir) + } + rc = do_jffs2_setxattr(inode, JFFS2_XPREFIX_SECURITY, name, value, len, 0); + +- kfree(name); +- kfree(value); +- return rc; ++ kfree(name); ++ kfree(value); ++ return rc; + } + + /* ---- XATTR Handler for "security.*" ----------------- */ +diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c +index d828b29..2a77d3f 100644 +--- a/fs/jffs2/summary.c ++++ b/fs/jffs2/summary.c +@@ -2,10 +2,10 @@ + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright © 2004 Ferenc Havasi , +- * Zoltan Sogor , +- * Patrik Kluba , +- * University of Szeged, Hungary +- * 2006 KaiGai Kohei ++ * Zoltan Sogor , ++ * Patrik Kluba , ++ * University of Szeged, Hungary ++ * 2006 KaiGai Kohei + * + * For licensing information, see the file 'LICENCE' in this directory. + * +diff --git a/fs/jffs2/summary.h b/fs/jffs2/summary.h +index 0c6669e..8bf34f2 100644 +--- a/fs/jffs2/summary.h ++++ b/fs/jffs2/summary.h +@@ -2,9 +2,9 @@ + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright © 2004 Ferenc Havasi , +- * Zoltan Sogor , +- * Patrik Kluba , +- * University of Szeged, Hungary ++ * Zoltan Sogor , ++ * Patrik Kluba , ++ * University of Szeged, Hungary + * + * For licensing information, see the file 'LICENCE' in this directory. + * +diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c +index 91d1d0f..d1d4f27 100644 +--- a/fs/jffs2/wbuf.c ++++ b/fs/jffs2/wbuf.c +@@ -220,6 +220,47 @@ static struct jffs2_raw_node_ref **jffs2_incore_replace_raw(struct jffs2_sb_info + return NULL; + } + ++#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY ++static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf, ++ uint32_t ofs) ++{ ++ int ret; ++ size_t retlen; ++ char *eccstr; ++ ++ ret = c->mtd->read(c->mtd, ofs, c->wbuf_pagesize, &retlen, c->wbuf_verify); ++ if (ret && ret != -EUCLEAN && ret != -EBADMSG) { ++ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x failed: %d\n", c->wbuf_ofs, ret); ++ return ret; ++ } else if (retlen != c->wbuf_pagesize) { ++ printk(KERN_WARNING "jffs2_verify_write(): Read back of page at %08x gave short read: %zd not %d.\n", ofs, retlen, c->wbuf_pagesize); ++ return -EIO; ++ } ++ if (!memcmp(buf, c->wbuf_verify, c->wbuf_pagesize)) ++ return 0; ++ ++ if (ret == -EUCLEAN) ++ eccstr = "corrected"; ++ else if (ret == -EBADMSG) ++ eccstr = "correction failed"; ++ else ++ eccstr = "OK or unused"; ++ ++ printk(KERN_WARNING "Write verify error (ECC %s) at %08x. Wrote:\n", ++ eccstr, c->wbuf_ofs); ++ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1, ++ c->wbuf, c->wbuf_pagesize, 0); ++ ++ printk(KERN_WARNING "Read back:\n"); ++ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1, ++ c->wbuf_verify, c->wbuf_pagesize, 0); ++ ++ return -EIO; ++} ++#else ++#define jffs2_verify_write(c,b,o) (0) ++#endif ++ + /* Recover from failure to write wbuf. Recover the nodes up to the + * wbuf, not the one which we were starting to try to write. */ + +@@ -380,7 +421,7 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c) + ret = c->mtd->write(c->mtd, ofs, towrite, &retlen, + rewrite_buf); + +- if (ret || retlen != towrite) { ++ if (ret || retlen != towrite || jffs2_verify_write(c, rewrite_buf, ofs)) { + /* Argh. We tried. Really we did. */ + printk(KERN_CRIT "Recovery of wbuf failed due to a second write error\n"); + kfree(buf); +@@ -587,15 +628,16 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad) + + ret = c->mtd->write(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf); + +- if (ret || retlen != c->wbuf_pagesize) { +- if (ret) +- printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n",ret); +- else { +- printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n", +- retlen, c->wbuf_pagesize); +- ret = -EIO; +- } +- ++ if (ret) { ++ printk(KERN_WARNING "jffs2_flush_wbuf(): Write failed with %d\n", ret); ++ goto wfail; ++ } else if (retlen != c->wbuf_pagesize) { ++ printk(KERN_WARNING "jffs2_flush_wbuf(): Write was short: %zd instead of %d\n", ++ retlen, c->wbuf_pagesize); ++ ret = -EIO; ++ goto wfail; ++ } else if ((ret = jffs2_verify_write(c, c->wbuf, c->wbuf_ofs))) { ++ wfail: + jffs2_wbuf_recover(c); + + return ret; +@@ -966,8 +1008,8 @@ exit: + + #define NR_OOB_SCAN_PAGES 4 + +-/* For historical reasons we use only 12 bytes for OOB clean marker */ +-#define OOB_CM_SIZE 12 ++/* For historical reasons we use only 8 bytes for OOB clean marker */ ++#define OOB_CM_SIZE 8 + + static const struct jffs2_unknown_node oob_cleanmarker = + { +@@ -1021,8 +1063,8 @@ int jffs2_check_oob_empty(struct jffs2_sb_info *c, + /* + * Check for a valid cleanmarker. + * Returns: 0 if a valid cleanmarker was found +- * 1 if no cleanmarker was found +- * negative error code if an error occurred ++ * 1 if no cleanmarker was found ++ * negative error code if an error occurred + */ + int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c, + struct jffs2_eraseblock *jeb) +@@ -1138,11 +1180,22 @@ int jffs2_nand_flash_setup(struct jffs2_sb_info *c) + return -ENOMEM; + } + ++#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY ++ c->wbuf_verify = kmalloc(c->wbuf_pagesize, GFP_KERNEL); ++ if (!c->wbuf_verify) { ++ kfree(c->oobbuf); ++ kfree(c->wbuf); ++ return -ENOMEM; ++ } ++#endif + return 0; + } + + void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c) + { ++#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY ++ kfree(c->wbuf_verify); ++#endif + kfree(c->wbuf); + kfree(c->oobbuf); + } +diff --git a/fs/jffs2/xattr.h b/fs/jffs2/xattr.h +index 3b0ff29..6e3b5dd 100644 +--- a/fs/jffs2/xattr.h ++++ b/fs/jffs2/xattr.h +@@ -75,7 +75,7 @@ extern void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c); + extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c); + + extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c, +- uint32_t xid, uint32_t version); ++ uint32_t xid, uint32_t version); + + extern void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic); + extern void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic); +diff --git a/fs/jffs2/xattr_user.c b/fs/jffs2/xattr_user.c +index 40942bc..8bbeab9 100644 +--- a/fs/jffs2/xattr_user.c ++++ b/fs/jffs2/xattr_user.c +@@ -17,7 +17,7 @@ + #include "nodelist.h" + + static int jffs2_user_getxattr(struct inode *inode, const char *name, +- void *buffer, size_t size) ++ void *buffer, size_t size) + { + if (!strcmp(name, "")) + return -EINVAL; +@@ -25,7 +25,7 @@ static int jffs2_user_getxattr(struct inode *inode, const char *name, + } + + static int jffs2_user_setxattr(struct inode *inode, const char *name, const void *buffer, +- size_t size, int flags) ++ size_t size, int flags) + { + if (!strcmp(name, "")) + return -EINVAL; +diff --git a/fs/promfs/Makefile b/fs/promfs/Makefile +new file mode 100644 +index 0000000..940a51b +--- /dev/null ++++ b/fs/promfs/Makefile +@@ -0,0 +1 @@ ++obj-$(CONFIG_PROMFS_FS) += promfs.o +diff --git a/fs/promfs/promfs.c b/fs/promfs/promfs.c +new file mode 100644 +index 0000000..9fb2bfa +--- /dev/null ++++ b/fs/promfs/promfs.c +@@ -0,0 +1,295 @@ ++/* ++ * promfs.c - generic inode/dentry functions for IEEE 1275-based filesystems. ++ * ++ * This is based heavily upon prior ieee1275 and other virtual filesystems ++ * implementations; openpromfs, proc_devtree.c, oprofilefs, procfs, ... ++ * ++ * Copyright (C) 2007 Andres Salomon ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. ++ */ ++ ++#include ++#include ++#include ++#include ++//#include ++#include ++ ++#define PROMFS_MAGIC 0x1f2f3fff ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Andres Salomon"); ++ ++struct promfs_inode ++{ ++ struct inode ino; ++ struct property *prop; ++}; ++ ++static inline struct promfs_inode *to_promfs_inode(struct inode *inode) ++{ ++ return container_of(inode, struct promfs_inode, ino); ++} ++ ++#if 0 ++static DEFINE_SPINLOCK(promfs_lock); ++ ++static struct of_node *of_tree = NULL; ++static DEFINE_RWLOCK(of_tree_lock); ++ ++void __init of_build_tree(void) ++{ ++ ++ ++} ++#endif ++ ++static int promfs_open_file(struct inode *inode, struct file *file) ++{ ++ struct promfs_inode *ino; ++ ++ ino = to_promfs_inode(inode); ++ if (!ino->prop) ++ return -EIO; ++ file->private_data = ino->prop; ++ ++ return 0; ++} ++ ++static ssize_t promfs_read_file(struct file *file, char __user *data, ++ size_t len, loff_t *ppos) ++{ ++ struct property *prop = (struct property *) file->private_data; ++ return simple_read_from_buffer(data, len, ppos, prop->value, ++ prop->length); ++} ++ ++static ssize_t promfs_write_file(struct file *file, char const __user *buf, ++ size_t count, loff_t * offset) ++{ ++ /* TODO.... 'cause, y'know, it would be nice. */ ++ return -EIO; ++} ++ ++static struct file_operations promfs_file_ops = { ++ .open = promfs_open_file, ++ .read = promfs_read_file, ++ .write = promfs_write_file, ++}; ++ ++static struct kmem_cache *promfs_inode_cachep; ++ ++static struct inode *promfs_alloc_inode(struct super_block *sb) ++{ ++ struct promfs_inode *pr_ino; ++ ++ pr_ino = kmem_cache_alloc(promfs_inode_cachep, GFP_KERNEL); ++ if (!pr_ino) ++ return NULL; ++ pr_ino->prop = NULL; ++ ++ return &pr_ino->ino; ++} ++ ++static void promfs_destroy_inode(struct inode *inode) ++{ ++ kmem_cache_free(promfs_inode_cachep, to_promfs_inode(inode)); ++} ++ ++static void promfs_read_inode(struct inode *inode) ++{ ++ inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; ++} ++ ++static int promfs_remount(struct super_block *sb, int *flags, char *data) ++{ ++ *flags |= MS_NOATIME; ++ return 0; ++} ++ ++static struct super_operations promfs_s_ops = { ++ .alloc_inode = promfs_alloc_inode, ++ .destroy_inode = promfs_destroy_inode, ++ .read_inode = promfs_read_inode, ++ .statfs = simple_statfs, ++ .drop_inode = generic_delete_inode, ++ .remount_fs = promfs_remount, ++}; ++ ++static struct inode *promfs_get_inode(struct super_block *sb, int mode) ++{ ++ struct inode *inode = new_inode(sb); ++ ++ if (inode) { ++ inode->i_mode = mode; ++ inode->i_uid = 0; ++ inode->i_gid = 0; ++ inode->i_blocks = 0; ++ inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME; ++ } ++ ++ return inode; ++} ++ ++static int promfs_create_file(struct super_block *sb, struct dentry *root, ++ struct property *prop, const struct file_operations *fops) ++{ ++ struct dentry *dentry; ++ struct inode *inode; ++ struct promfs_inode *ino; ++ ++ dentry = d_alloc_name(root, prop->name); ++ if (!dentry) ++ goto err; ++ ++ inode = promfs_get_inode(sb, S_IFREG | 0644); ++ if (!inode) ++ goto err_dput; ++ inode->i_fop = fops; ++ ino = to_promfs_inode(inode); ++ ino->prop = prop; ++ d_add(dentry, inode); ++ ++ return 0; ++ ++err_dput: ++ dput(dentry); ++err: ++ return -EFAULT; ++} ++ ++struct dentry *promfs_create_dir(struct super_block *sb, struct dentry *root, ++ char const *name) ++{ ++ struct dentry *dentry; ++ struct inode *inode; ++ ++ dentry = d_alloc_name(root, name); ++ if (!dentry) ++ goto err; ++ ++ inode = promfs_get_inode(sb, S_IFDIR | 0755); ++ if (!inode) ++ goto err_dput; ++ inode->i_op = &simple_dir_inode_operations; ++ inode->i_fop = &simple_dir_operations; ++ d_add(dentry, inode); ++ return dentry; ++ ++err_dput: ++ dput(dentry); ++err: ++ return NULL; ++} ++ ++void promfs_populate(struct super_block *sb, struct dentry *root, ++ struct device_node *node) ++{ ++ struct dentry *dentry; ++ struct device_node *child; ++ struct property *prop; ++ ++ if (!node) ++ return; ++ ++ for (child = node->child; child; child = child->sibling) { ++ dentry = promfs_create_dir(sb, root, child->path_component_name); ++ promfs_populate(sb, dentry, child); ++ } ++ for (prop = node->properties; prop; prop = prop->next) ++ promfs_create_file(sb, root, prop, &promfs_file_ops); ++} ++ ++static int promfs_fill_super(struct super_block *sb, void *data, int silent) ++{ ++ struct inode *root_inode; ++ struct dentry *root_dentry; ++ struct promfs_inode *inode; ++ ++ sb->s_blocksize = PAGE_CACHE_SIZE; ++ sb->s_blocksize_bits = PAGE_CACHE_SHIFT; ++ sb->s_magic = PROMFS_MAGIC; ++ sb->s_op = &promfs_s_ops; ++ sb->s_time_gran = 1; ++ sb->s_flags |= MS_NOATIME; ++ ++ root_inode = promfs_get_inode(sb, S_IFDIR | 0755); ++ if (!root_inode) ++ goto err; ++ root_inode->i_op = &simple_dir_inode_operations; ++ root_inode->i_fop = &simple_dir_operations; ++ ++ inode = to_promfs_inode(root_inode); ++ ++ root_dentry = d_alloc_root(root_inode); ++ if (!root_dentry) ++ goto err_iput; ++ sb->s_root = root_dentry; ++ ++ promfs_populate(sb, root_dentry, of_find_node_by_path("/")); ++ return 0; ++ ++err_iput: ++ iput(root_inode); ++err: ++ return -ENOMEM; ++} ++ ++static int promfs_get_sb(struct file_system_type *fs_type, int flags, ++ const char *dev_name, void *data, struct vfsmount *mnt) ++{ ++ return get_sb_single(fs_type, flags, data, promfs_fill_super, mnt); ++} ++ ++static struct file_system_type promfs_fs_type = { ++ .owner = THIS_MODULE, ++ .name = "promfs", ++ .get_sb = promfs_get_sb, ++ .kill_sb = kill_litter_super, ++}; ++ ++static void init_once(void *i, struct kmem_cache *cachep, unsigned long fl) ++{ ++ struct promfs_inode *inode = (struct promfs_inode *) i; ++ inode_init_once(&inode->ino); ++} ++ ++static int __init init_promfs(void) ++{ ++ int err; ++ ++ prom_build_devicetree(); ++ promfs_inode_cachep = kmem_cache_create("promfs_inode_cache", ++ sizeof(struct promfs_inode), 0, ++ SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD, init_once, NULL); ++ if (!promfs_inode_cachep) ++ return -ENOMEM; ++ ++ err = register_filesystem(&promfs_fs_type); ++ if (err) ++ kmem_cache_destroy(promfs_inode_cachep); ++ ++ return err; ++} ++ ++static void __exit exit_promfs(void) ++{ ++ unregister_filesystem(&promfs_fs_type); ++ kmem_cache_destroy(promfs_inode_cachep); ++} ++ ++module_init(init_promfs); ++module_exit(exit_promfs); +diff --git a/include/asm-i386/geode.h b/include/asm-i386/geode.h +index 6da4bbb..f18ebe2 100644 +--- a/include/asm-i386/geode.h ++++ b/include/asm-i386/geode.h +@@ -135,6 +135,55 @@ static inline void geode_gpio_event_pme(unsigned int gpio, int pair) + geode_gpio_setup_event(gpio, pair, 1); + } + ++/* MFGPT */ ++ ++#define MFGPT_TIMER_ANY -1 ++ ++#define MFGPT_DOMAIN_WORKING 1 ++#define MFGPT_DOMAIN_STANDBY 2 ++#define MFGPT_DOMAIN_ANY (MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY) ++ ++#define MFGPT_CMP1 0 ++#define MFGPT_CMP2 1 ++ ++#define MFGPT_EVENT_IRQ 0 ++#define MFGPT_EVENT_NMI 1 ++#define MFGPT_EVENT_RESET 3 ++ ++#define MFGPT_REG_CMP1 0 ++#define MFGPT_REG_CMP2 2 ++#define MFGPT_REG_COUNTER 4 ++#define MFGPT_REG_SETUP 6 ++ ++#define MFGPT_SETUP_CNTEN (1 << 15) ++#define MFGPT_SETUP_CMP2 (1 << 14) ++#define MFGPT_SETUP_CMP1 (1 << 13) ++#define MFGPT_SETUP_SETUP (1 << 12) ++#define MFGPT_SETUP_STOPEN (1 << 11) ++#define MFGPT_SETUP_EXTEN (1 << 10) ++#define MFGPT_SETUP_REVEN (1 << 5) ++#define MFGPT_SETUP_CLKSEL (1 << 4) ++ ++static inline void geode_mfgpt_write(int timer, u16 reg, u16 value) ++{ ++ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT); ++ outw(value, base + reg + (timer * 8)); ++} ++ ++static inline u16 geode_mfgpt_read(int timer, u16 reg) ++{ ++ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT); ++ return inw(base + reg + (timer * 8)); ++} ++ ++extern int __init geode_mfgpt_detect(void); ++extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable); ++extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable); ++extern int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner); ++ ++#define geode_mfgpt_setup_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),1) ++#define geode_mfgpt_release_irq(t,c,i) geode_mfgpt_set_irq((t),(c),(i),0) ++ + /* Specific geode tests */ + + static inline int is_geode_gx(void) +diff --git a/include/asm-i386/ofw.h b/include/asm-i386/ofw.h +new file mode 100644 +index 0000000..79b08b1 +--- /dev/null ++++ b/include/asm-i386/ofw.h +@@ -0,0 +1,16 @@ ++/* ++ * Definitions for Open Firmware client interface on 32-bit system. ++ * OF Cell size is 4. Integer properties are encoded big endian, ++ * as with all OF implementations. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++#ifndef _OFW_H ++#define _OFW_H ++ ++extern int ofw(char *, int, int, ...); ++ ++#endif +diff --git a/include/asm-i386/olpc.h b/include/asm-i386/olpc.h +new file mode 100644 +index 0000000..26bc1a8 +--- /dev/null ++++ b/include/asm-i386/olpc.h +@@ -0,0 +1,116 @@ ++/* OLPC machine specific definitions */ ++ ++#ifndef ASM_OLPC_H_ ++#define ASM_OLPC_H_ ++ ++#include ++ ++struct olpc_platform_t { ++ int flags; ++ int boardrev; ++ int ecver; ++}; ++ ++#define OLPC_F_PRESENT 0x01 ++#define OLPC_F_DCON 0x02 ++#define OLPC_F_VSA 0x04 ++ ++enum ++{ ++ OLPC_REV_A = 0, ++ ++ OLPC_REV_PRE_B1, ++ OLPC_REV_B1, ++ OLPC_REV_PRE_B2, ++ OLPC_REV_B2, ++ OLPC_REV_PRE_B3, ++ OLPC_REV_B3, ++ OLPC_REV_B4, ++ OLPC_REV_C1, ++ OLPC_REV_R1, ++ OLPC_REV_UNKNOWN /* this should always come last */ ++}; ++ ++#ifndef CONFIG_OLPC ++ ++static inline int machine_is_olpc(void) { return 0; } ++static inline int olpc_has_dcon(void) { return 0; } ++static inline int olpc_has_vsa(void) { return 0; } ++static inline int olpc_get_rev(void) { return OLPC_REV_UNKNOWN; } ++ ++#else ++ ++extern struct olpc_platform_t olpc_platform_info; ++ ++static inline int ++machine_is_olpc(void) ++{ ++ return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0; ++} ++ ++static inline int ++olpc_has_dcon(void) ++{ ++ return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0; ++} ++ ++static inline int ++olpc_has_vsa(void) ++{ ++ return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0; ++} ++ ++static inline int ++olpc_get_rev(void) ++{ ++ return olpc_platform_info.boardrev; ++} ++ ++static inline int ++olpc_rev_after(int rev) ++{ ++ return olpc_platform_info.boardrev > rev && ++ olpc_platform_info.boardrev != OLPC_REV_UNKNOWN; ++} ++ ++static inline int ++olpc_rev_before(int rev) ++{ ++ return olpc_platform_info.boardrev < rev || ++ olpc_platform_info.boardrev == OLPC_REV_UNKNOWN; ++} ++ ++#endif ++ ++/* EC functions */ ++ ++int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, ++ unsigned char *outbuf, size_t outlen); ++ ++void olpc_register_battery_callback(void (*f)(unsigned long)); ++void olpc_deregister_battery_callback(void); ++ ++/* EC commands and responses */ ++ ++/* SCI source values */ ++ ++#define EC_SCI_SRC_EMPTY 0x00 ++#define EC_SCI_SRC_GAME 0x01 ++#define EC_SCI_SRC_BATTERY 0x02 ++#define EC_SCI_SRC_BATSOC 0x04 ++#define EC_SCI_SRC_BATERR 0x08 ++#define EC_SCI_SRC_EBOOK 0x10 ++#define EC_SCI_SRC_WLAN 0x20 ++#define EC_SCI_SRC_ACPWR 0x40 ++ ++/* GPIO assignments */ ++ ++#define OLPC_GPIO_MIC_AC 1 ++#define OLPC_GPIO_DCON_IRQ 7 ++#define OLPC_GPIO_THRM_ALRM 10 ++#define OLPC_GPIO_WORKAUX 24 ++#define OLPC_GPIO_LID 26 ++#define OLPC_GPIO_ECSCI 27 ++ ++#endif ++ +diff --git a/include/asm-i386/prom.h b/include/asm-i386/prom.h +new file mode 100644 +index 0000000..59d3bdd +--- /dev/null ++++ b/include/asm-i386/prom.h +@@ -0,0 +1,108 @@ ++#ifndef _I386_PROM_H ++#define _I386_PROM_H ++#ifdef __KERNEL__ ++ ++ ++/* ++ * Definitions for talking to the Open Firmware PROM on ++ * Power Macintosh computers. ++ * ++ * Copyright (C) 1996-2005 Paul Mackerras. ++ * ++ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. ++ * Updates for SPARC64 by David S. Miller ++ * Updates for i386/OLPC by Andres Salomon ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version ++ * 2 of the License, or (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++ ++typedef u32 phandle; ++typedef u32 ihandle; ++ ++struct property { ++ char *name; ++ int length; ++ void *value; ++ struct property *next; ++}; ++ ++struct device_node { ++ const char *name; ++ const char *type; ++ phandle node; ++// phandle linux_phandle; ++ char *path_component_name; ++ char *full_name; ++ ++ struct property *properties; ++ struct property *deadprops; /* removed properties */ ++ struct device_node *parent; ++ struct device_node *child; ++ struct device_node *sibling; ++ struct device_node *next; /* next device of same type */ ++ struct device_node *allnext; /* next in list of all nodes */ ++ struct proc_dir_entry *pde; /* this node's proc directory */ ++ struct kref kref; ++ unsigned long _flags; ++ void *data; ++}; ++ ++/* flag descriptions */ ++#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */ ++ ++#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags) ++#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags) ++ ++#define OF_BAD_ADDR ((u64)-1) ++ ++static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de) ++{ ++ dn->pde = de; ++} ++ ++extern struct device_node *of_find_node_by_name(struct device_node *from, ++ const char *name); ++#define for_each_node_by_name(dn, name) \ ++ for (dn = of_find_node_by_name(NULL, name); dn; \ ++ dn = of_find_node_by_name(dn, name)) ++extern struct device_node *of_find_node_by_type(struct device_node *from, ++ const char *type); ++#define for_each_node_by_type(dn, type) \ ++ for (dn = of_find_node_by_type(NULL, type); dn; \ ++ dn = of_find_node_by_type(dn, type)) ++extern struct device_node *of_find_compatible_node(struct device_node *from, ++ const char *type, const char *compat); ++extern struct device_node *of_find_node_by_path(const char *path); ++extern struct device_node *of_find_node_by_phandle(phandle handle); ++extern struct device_node *of_get_parent(const struct device_node *node); ++extern struct device_node *of_get_next_child(const struct device_node *node, ++ struct device_node *prev); ++extern struct property *of_find_property(const struct device_node *np, ++ const char *name, ++ int *lenp); ++//extern struct device_node *of_node_get(struct device_node *node); ++//extern void of_node_put(struct device_node *node); ++extern int of_device_is_compatible(const struct device_node *device, ++ const char *); ++extern const void *of_get_property(const struct device_node *node, ++ const char *name, ++ int *lenp); ++#define get_property(node,name,lenp) of_get_property(node,name,lenp) ++extern int of_set_property(struct device_node *node, const char *name, void *val, int len); ++extern int of_getintprop_default(struct device_node *np, ++ const char *name, ++ int def); ++extern int of_n_addr_cells(struct device_node *np); ++extern int of_n_size_cells(struct device_node *np); ++ ++extern void prom_build_devicetree(void); ++ ++#endif /* __KERNEL__ */ ++#endif +diff --git a/include/asm-i386/setup.h b/include/asm-i386/setup.h +index 7862fe8..d7146c0 100644 +--- a/include/asm-i386/setup.h ++++ b/include/asm-i386/setup.h +@@ -24,6 +24,7 @@ + #define OLD_CL_BASE_ADDR 0x90000 + #define OLD_CL_OFFSET 0x90022 + #define NEW_CL_POINTER 0x228 /* Relative to real mode data */ ++#define OFW_INFO_OFFSET 0xb0 /* Relative to real mode data */ + + #ifndef __ASSEMBLY__ + +diff --git a/include/linux/battery.h b/include/linux/battery.h +new file mode 100644 +index 0000000..2f856a0 +--- /dev/null ++++ b/include/linux/battery.h +@@ -0,0 +1,101 @@ ++/* ++ * Driver model for batteries ++ * ++ * © 2006 David Woodhouse ++ * ++ * Based on LED Class support, by John Lenz and Richard Purdie: ++ * ++ * © 2005 John Lenz ++ * © 2005-2006 Richard Purdie ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#ifndef __LINUX_BATTERY_H__ ++#define __LINUX_BATTERY_H__ ++ ++struct device; ++struct class_device; ++ ++/* ++ * Battery Core ++ */ ++#define PWRDEV_TYPE_BATTERY 0 ++#define PWRDEV_TYPE_AC 1 ++ ++#define BAT_STAT_PRESENT (1<<0) ++#define BAT_STAT_LOW (1<<1) ++#define BAT_STAT_FULL (1<<2) ++#define BAT_STAT_CHARGING (1<<3) ++#define BAT_STAT_DISCHARGING (1<<4) ++#define BAT_STAT_OVERTEMP (1<<5) ++#define BAT_STAT_CRITICAL (1<<6) ++#define BAT_STAT_FIRE (1<<7) ++#define BAT_STAT_CHARGE_DONE (1<<8) ++ ++/* Thou shalt not export any attributes in sysfs except these, and ++ with these units: */ ++#define BAT_INFO_STATUS "status" /* Not free-form. Use ++ provided function */ ++#define BAT_INFO_TEMP1 "temp1" /* °C/1000 */ ++#define BAT_INFO_TEMP1_NAME "temp1_name" /* string */ ++ ++#define BAT_INFO_TEMP2 "temp2" /* °C/1000 */ ++#define BAT_INFO_TEMP2_NAME "temp2_name" /* string */ ++ ++#define BAT_INFO_VOLTAGE "voltage" /* mV */ ++#define BAT_INFO_VOLTAGE_DESIGN "voltage_design" /* mV */ ++ ++#define BAT_INFO_CURRENT "current" /* mA */ ++#define BAT_INFO_CURRENT_NOW "current_now" /* mA */ ++ ++#define BAT_INFO_POWER "power" /* mW */ ++#define BAT_INFO_POWER_NOW "power_now" /* mW */ ++ ++/* The following capacity/charge properties are represented in either ++ mA or mW. The CAP_UNITS property MUST be provided if any of these are. */ ++#define BAT_INFO_RATE "rate" /* CAP_UNITS */ ++#define BAT_INFO_CAP_LEFT "capacity_left" /* CAP_UNITS*h */ ++#define BAT_INFO_CAP_DESIGN "capacity_design" /* CAP_UNITS*h */ ++#define BAT_INFO_CAP_LAST_FULL "capacity_last_full" /* CAP_UNITS*h */ ++#define BAT_INFO_CAP_LOW "capacity_low_thresh" /* CAP_UNITS*h */ ++#define BAT_INFO_CAP_WARN "capacity_warn_thresh" /* CAP_UNITS*h */ ++#define BAT_INFO_CAP_UNITS "capacity_units" /* string: must be ++ either mA or mW */ ++ ++#define BAT_INFO_CAP_PCT "capacity_percentage" /* integer */ ++ ++#define BAT_INFO_TIME_EMPTY "time_to_empty" /* seconds */ ++#define BAT_INFO_TIME_EMPTY_NOW "time_to_empty_now" /* seconds */ ++#define BAT_INFO_TIME_FULL "time_to_full" /* seconds */ ++#define BAT_INFO_TIME_FULL_NOW "time_to_full_now" /* seconds */ ++ ++#define BAT_INFO_MANUFACTURER "manufacturer" /* string */ ++#define BAT_INFO_TECHNOLOGY "technology" /* string */ ++#define BAT_INFO_MODEL "model" /* string */ ++#define BAT_INFO_SERIAL "serial" /* string */ ++#define BAT_INFO_OEM_INFO "oem_info" /* string */ ++ ++#define BAT_INFO_CYCLE_COUNT "cycle_count" /* integer */ ++#define BAT_INFO_DATE_MFR "date_manufactured" /* YYYY[-MM[-DD]] */ ++#define BAT_INFO_DATE_FIRST_USE "date_first_use" /* YYYY[-MM[-DD]] */ ++ ++struct battery_dev { ++ int status_cap; ++ int id; ++ int type; ++ const char *name; ++ ++ struct device *dev; ++}; ++ ++int battery_device_register(struct device *parent, ++ struct battery_dev *battery_cdev); ++void battery_device_unregister(struct battery_dev *battery_cdev); ++ ++ ++ssize_t battery_attribute_show_status(char *buf, unsigned long status); ++ssize_t battery_attribute_show_ac_status(char *buf, unsigned long status); ++#endif /* __LINUX_BATTERY_H__ */ +diff --git a/include/linux/console.h b/include/linux/console.h +index 56a7bcd..1a8b034 100644 +--- a/include/linux/console.h ++++ b/include/linux/console.h +@@ -121,14 +121,11 @@ extern void console_stop(struct console *); + extern void console_start(struct console *); + extern int is_console_locked(void); + +-#ifndef CONFIG_DISABLE_CONSOLE_SUSPEND ++extern int serial_console_suspend_enabled; ++ + /* Suspend and resume console messages over PM events */ + extern void suspend_console(void); + extern void resume_console(void); +-#else +-static inline void suspend_console(void) {} +-static inline void resume_console(void) {} +-#endif /* CONFIG_DISABLE_CONSOLE_SUSPEND */ + + int mda_console_init(void); + void prom_con_init(void); +diff --git a/include/linux/fb.h b/include/linux/fb.h +index cec5410..6b59db5 100644 +--- a/include/linux/fb.h ++++ b/include/linux/fb.h +@@ -664,6 +664,12 @@ struct fb_ops { + /* restore saved state */ + void (*fb_restore_state)(struct fb_info *info); + ++ /* Shut down the graphics engine to save power */ ++ int (*fb_powerdown)(struct fb_info *info); ++ ++ /* Power it back up */ ++ int (*fb_powerup)(struct fb_info *info); ++ + /* get capability given var */ + void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps, + struct fb_var_screeninfo *var); +@@ -943,6 +949,9 @@ extern int fb_get_color_depth(struct fb_var_screeninfo *var, + extern int fb_get_options(char *name, char **option); + extern int fb_new_modelist(struct fb_info *info); + ++extern int fb_powerdown(struct fb_info *info); ++extern int fb_powerup(struct fb_info *info); ++ + extern struct fb_info *registered_fb[FB_MAX]; + extern int num_registered_fb; + extern struct class *fb_class; +diff --git a/include/linux/isl_38xx.h b/include/linux/isl_38xx.h +new file mode 100644 +index 0000000..c7e98f2 +--- /dev/null ++++ b/include/linux/isl_38xx.h +@@ -0,0 +1,127 @@ ++/* ++ * Copyright (C) 2002 Intersil Americas Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _LINUX_ISL_38XX_H ++#define _LINUX_ISL_38XX_H ++ ++#include ++ ++#define ISL38XX_CB_RX_QSIZE 8 ++#define ISL38XX_CB_TX_QSIZE 32 ++ ++/* ISL38XX Access Point Specific definitions */ ++#define ISL38XX_MAX_WDS_LINKS 8 ++ ++/* ISL38xx Client Specific definitions */ ++#define ISL38XX_PSM_ACTIVE_STATE 0 ++#define ISL38XX_PSM_POWERSAVE_STATE 1 ++ ++/* ISL38XX Host Interface Definitions */ ++#define ISL38XX_PCI_MEM_SIZE 0x02000 ++#define ISL38XX_MEMORY_WINDOW_SIZE 0x01000 ++#define ISL38XX_DEV_FIRMWARE_ADDRES 0x20000 ++#define ISL38XX_WRITEIO_DELAY 10 /* in us */ ++#define ISL38XX_RESET_DELAY 50 /* in ms */ ++#define ISL38XX_WAIT_CYCLE 10 /* in 10ms */ ++#define ISL38XX_MAX_WAIT_CYCLES 10 ++ ++/* PCI Memory Area */ ++#define ISL38XX_HARDWARE_REG 0x0000 ++#define ISL38XX_CARDBUS_CIS 0x0800 ++#define ISL38XX_DIRECT_MEM_WIN 0x1000 ++ ++/* Hardware registers */ ++#define ISL38XX_DEV_INT_REG 0x0000 ++#define ISL38XX_INT_IDENT_REG 0x0010 ++#define ISL38XX_INT_ACK_REG 0x0014 ++#define ISL38XX_INT_EN_REG 0x0018 ++#define ISL38XX_GEN_PURP_COM_REG_1 0x0020 ++#define ISL38XX_GEN_PURP_COM_REG_2 0x0024 ++#define ISL38XX_CTRL_BLK_BASE_REG ISL38XX_GEN_PURP_COM_REG_1 ++#define ISL38XX_DIR_MEM_BASE_REG 0x0030 ++#define ISL38XX_CTRL_STAT_REG 0x0078 ++ ++/* High end mobos queue up pci writes, the following ++ * is used to "read" from after a write to force flush */ ++#define ISL38XX_PCI_POSTING_FLUSH ISL38XX_INT_EN_REG ++ ++/** ++ * isl38xx_w32_flush - PCI iomem write helper ++ * @base: (host) memory base address of the device ++ * @val: 32bit value (host order) to write ++ * @offset: byte offset into @base to write value to ++ * ++ * This helper takes care of writing a 32bit datum to the ++ * specified offset into the device's pci memory space, and making sure ++ * the pci memory buffers get flushed by performing one harmless read ++ * from the %ISL38XX_PCI_POSTING_FLUSH offset. ++ */ ++static inline void ++isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset) ++{ ++ writel(val, base + offset); ++ (void) readl(base + ISL38XX_PCI_POSTING_FLUSH); ++} ++ ++/* Device Interrupt register bits */ ++#define ISL38XX_DEV_INT_RESET 0x0001 ++#define ISL38XX_DEV_INT_UPDATE 0x0002 ++#define ISL38XX_DEV_INT_WAKEUP 0x0008 ++#define ISL38XX_DEV_INT_SLEEP 0x0010 ++#define ISL38XX_DEV_INT_ABORT 0x0020 ++/* thos two only used in USB */ ++#define ISL38XX_DEV_INT_DATA 0x0040 ++#define ISL38XX_DEV_INT_MGMT 0x0080 ++ ++#define ISL38XX_DEV_INT_PCIUART_CTS 0x4000 ++#define ISL38XX_DEV_INT_PCIUART_DR 0x8000 ++ ++/* Interrupt Identification/Acknowledge/Enable register bits */ ++#define ISL38XX_INT_IDENT_UPDATE 0x0002 ++#define ISL38XX_INT_IDENT_INIT 0x0004 ++#define ISL38XX_INT_IDENT_WAKEUP 0x0008 ++#define ISL38XX_INT_IDENT_SLEEP 0x0010 ++#define ISL38XX_INT_IDENT_PCIUART_CTS 0x4000 ++#define ISL38XX_INT_IDENT_PCIUART_DR 0x8000 ++ ++#define ISL38XX_INT_SOURCES (ISL38XX_INT_IDENT_UPDATE | \ ++ ISL38XX_INT_IDENT_INIT | \ ++ ISL38XX_INT_IDENT_WAKEUP | \ ++ ISL38XX_INT_IDENT_SLEEP | \ ++ ISL38XX_INT_IDENT_PCIUART_CTS | \ ++ ISL38XX_INT_IDENT_PCIUART_DR) ++ ++/* Control/Status register bits */ ++/* Looks like there are other meaningful bits ++ 0x20004400 seen in normal operation, ++ 0x200044db at 'timeout waiting for mgmt response' ++*/ ++#define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200 ++#define ISL38XX_CTRL_STAT_CLKRUN 0x00800000 ++#define ISL38XX_CTRL_STAT_RESET 0x10000000 ++#define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000 ++#define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000 ++#define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000 ++ ++/* Some flags for the isl hardware registers controlling DMA inside the ++ * chip */ ++#define ISL38XX_DMA_STATUS_DONE 0x00000001 ++#define ISL38XX_DMA_STATUS_READY 0x00000002 ++#define NET2280_EPA_FIFO_PCI_ADDR 0x20000000 ++#define ISL38XX_DMA_MASTER_CONTROL_TRIGGER 0x00000004 ++ ++#endif /* _LINUX_ISL_38XX_H */ +diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h +index a56d24a..fd0a260 100644 +--- a/include/linux/mtd/onenand.h ++++ b/include/linux/mtd/onenand.h +@@ -60,6 +60,7 @@ struct onenand_bufferram { + * @erase_shift: [INTERN] number of address bits in a block + * @page_shift: [INTERN] number of address bits in a page + * @page_mask: [INTERN] a page per block mask ++ * @writesize: [INTERN] a real page size + * @bufferram_index: [INTERN] BufferRAM index + * @bufferram: [INTERN] BufferRAM info + * @readw: [REPLACEABLE] hardware specific function for read short +@@ -100,6 +101,7 @@ struct onenand_chip { + unsigned int erase_shift; + unsigned int page_shift; + unsigned int page_mask; ++ unsigned int writesize; + + unsigned int bufferram_index; + struct onenand_bufferram bufferram[MAX_BUFFERRAM]; +@@ -140,6 +142,8 @@ struct onenand_chip { + #define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1) + #define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1) + #define ONENAND_SET_PREV_BUFFERRAM(this) (this->bufferram_index ^= 1) ++#define ONENAND_SET_BUFFERRAM0(this) (this->bufferram_index = 0) ++#define ONENAND_SET_BUFFERRAM1(this) (this->bufferram_index = 1) + + #define ONENAND_GET_SYS_CFG1(this) \ + (this->read_word(this->base + ONENAND_REG_SYS_CFG1)) +@@ -149,6 +153,13 @@ struct onenand_chip { + #define ONENAND_IS_DDP(this) \ + (this->device_id & ONENAND_DEVICE_IS_DDP) + ++#ifdef CONFIG_MTD_ONENAND_2X_PROGRAM ++#define ONENAND_IS_2PLANE(this) \ ++ (this->options & ONENAND_HAS_2PLANE) ++#else ++#define ONENAND_IS_2PLANE(this) (0) ++#endif ++ + /* Check byte access in OneNAND */ + #define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1) + +@@ -157,6 +168,7 @@ struct onenand_chip { + */ + #define ONENAND_HAS_CONT_LOCK (0x0001) + #define ONENAND_HAS_UNLOCK_ALL (0x0002) ++#define ONENAND_HAS_2PLANE (0x0004) + #define ONENAND_PAGEBUF_ALLOC (0x1000) + #define ONENAND_OOBBUF_ALLOC (0x2000) + +diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h +index af94719..c46161f 100644 +--- a/include/linux/mtd/onenand_regs.h ++++ b/include/linux/mtd/onenand_regs.h +@@ -74,6 +74,8 @@ + + #define ONENAND_DEVICE_DENSITY_512Mb (0x002) + #define ONENAND_DEVICE_DENSITY_1Gb (0x003) ++#define ONENAND_DEVICE_DENSITY_2Gb (0x004) ++#define ONENAND_DEVICE_DENSITY_4Gb (0x005) + + /* + * Version ID Register F002h (R) +@@ -111,6 +113,8 @@ + #define ONENAND_CMD_READOOB (0x13) + #define ONENAND_CMD_PROG (0x80) + #define ONENAND_CMD_PROGOOB (0x1A) ++#define ONENAND_CMD_2X_PROG (0x7D) ++#define ONENAND_CMD_2X_CACHE_PROG (0x7F) + #define ONENAND_CMD_UNLOCK (0x23) + #define ONENAND_CMD_LOCK (0x2A) + #define ONENAND_CMD_LOCK_TIGHT (0x2C) +diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h +index 699b7e9..b44facf 100644 +--- a/include/linux/vt_kern.h ++++ b/include/linux/vt_kern.h +@@ -95,4 +95,23 @@ struct vt_spawn_console { + }; + extern struct vt_spawn_console vt_spawn_con; + ++/* A notifier list for console events */ ++extern struct raw_notifier_head console_notifier_list; ++ ++/* Called when the FG console switches to KD_TEXT mode */ ++#define CONSOLE_EVENT_SWITCH_TEXT 0x01 ++ ++/* Called when the FG console switches to KD_GRAPHICS mode */ ++#define CONSOLE_EVENT_SWITCH_GRAPHICS 0x02 ++ ++static inline int console_event_register(struct notifier_block *n) ++{ ++ return raw_notifier_chain_register(&console_notifier_list, n); ++} ++ ++static inline int console_event_unregister(struct notifier_block *n) ++{ ++ return raw_notifier_chain_unregister(&console_notifier_list, n); ++} ++ + #endif /* _VT_KERN_H */ +diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h +index 246ac23..874a2c8 100644 +--- a/include/sound/ac97_codec.h ++++ b/include/sound/ac97_codec.h +@@ -281,10 +281,12 @@ + /* specific - Analog Devices */ + #define AC97_AD_TEST 0x5a /* test register */ + #define AC97_AD_TEST2 0x5c /* undocumented test register 2 */ ++#define AC97_AD_HPFD_SHIFT 12 /* High Pass Filter Disable */ + #define AC97_AD_CODEC_CFG 0x70 /* codec configuration */ + #define AC97_AD_JACK_SPDIF 0x72 /* Jack Sense & S/PDIF */ + #define AC97_AD_SERIAL_CFG 0x74 /* Serial Configuration */ + #define AC97_AD_MISC 0x76 /* Misc Control Bits */ ++#define AC97_AD_VREFD_SHIFT 2 /* V_REFOUT Disable (AD1888) */ + + /* specific - Cirrus Logic */ + #define AC97_CSR_ACMODE 0x5e /* AC Mode Register */ +diff --git a/kernel/power/console.c b/kernel/power/console.c +index 89bcf49..dca98f5 100644 +--- a/kernel/power/console.c ++++ b/kernel/power/console.c +@@ -9,7 +9,7 @@ + #include + #include "power.h" + +-#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) ++#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) && !defined(CONFIG_DISABLE_SUSPEND_VT_SWITCH) + #define SUSPEND_CONSOLE (MAX_NR_CONSOLES-1) + + static int orig_fgconsole, orig_kmsg; +diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c +index bbed644..090e852 100644 +--- a/sound/pci/ac97/ac97_codec.c ++++ b/sound/pci/ac97/ac97_codec.c +@@ -49,7 +49,7 @@ module_param(enable_loopback, bool, 0444); + MODULE_PARM_DESC(enable_loopback, "Enable AC97 ADC/DAC Loopback Control"); + + #ifdef CONFIG_SND_AC97_POWER_SAVE +-static int power_save; ++static int power_save = 1; + module_param(power_save, bool, 0644); + MODULE_PARM_DESC(power_save, "Enable AC97 power-saving control"); + #endif +diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c +index 581ebba..06637f7 100644 +--- a/sound/pci/ac97/ac97_patch.c ++++ b/sound/pci/ac97/ac97_patch.c +@@ -1973,8 +1973,9 @@ static const struct snd_kcontrol_new snd_ac97_ad1888_controls[] = { + .get = snd_ac97_ad1888_lohpsel_get, + .put = snd_ac97_ad1888_lohpsel_put + }, +- AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, 2, 1, 1), +- AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, 12, 1, 1), ++ AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, AC97_AD_VREFD_SHIFT, 1, 1), ++ AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, ++ AC97_AD_HPFD_SHIFT, 1, 1), + AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, +diff --git a/sound/pci/cs5535audio/Makefile b/sound/pci/cs5535audio/Makefile +index ad947b4..3866c4d 100644 +--- a/sound/pci/cs5535audio/Makefile ++++ b/sound/pci/cs5535audio/Makefile +@@ -8,5 +8,9 @@ ifeq ($(CONFIG_PM),y) + snd-cs5535audio-objs += cs5535audio_pm.o + endif + ++ifdef CONFIG_OLPC ++snd-cs5535audio-objs += cs5535audio_olpc.o ++endif ++ + # Toplevel Module Dependency + obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o +diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c +index b8e75ef..389d9da 100644 +--- a/sound/pci/cs5535audio/cs5535audio.c ++++ b/sound/pci/cs5535audio/cs5535audio.c +@@ -145,7 +145,7 @@ static unsigned short snd_cs5535audio_ac97_codec_read(struct snd_ac97 *ac97, + return snd_cs5535audio_codec_read(cs5535au, reg); + } + +-static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au) ++static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au) + { + struct snd_card *card = cs5535au->card; + struct snd_ac97_bus *pbus; +@@ -160,10 +160,14 @@ static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au) + return err; + + memset(&ac97, 0, sizeof(ac97)); +- ac97.scaps = AC97_SCAP_AUDIO|AC97_SCAP_SKIP_MODEM; ++ ac97.scaps = AC97_SCAP_AUDIO | AC97_SCAP_SKIP_MODEM ++ | AC97_SCAP_POWER_SAVE; + ac97.private_data = cs5535au; + ac97.pci = cs5535au->pci; + ++ /* olpc_prequirks is dummied out if not olpc */ ++ olpc_prequirks(card, &ac97); ++ + if ((err = snd_ac97_mixer(pbus, &ac97, &cs5535au->ac97)) < 0) { + snd_printk(KERN_ERR "mixer failed\n"); + return err; +@@ -171,6 +175,12 @@ static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au) + + snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk); + ++ /* olpc_quirks is dummied out if not olpc */ ++ if (( err = olpc_quirks(card, cs5535au->ac97)) < 0) { ++ snd_printk(KERN_ERR "olpc quirks failed\n"); ++ return err; ++ } ++ + return 0; + } + +@@ -206,7 +216,6 @@ static void process_bm1_irq(struct cs5535audio *cs5535au) + static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id) + { + u16 acc_irq_stat; +- u8 bm_stat; + unsigned char count; + struct cs5535audio *cs5535au = dev_id; + +@@ -217,7 +226,7 @@ static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id) + + if (!acc_irq_stat) + return IRQ_NONE; +- for (count = 0; count < 10; count++) { ++ for (count = 0; count < 4; count++) { + if (acc_irq_stat & (1 << count)) { + switch (count) { + case IRQ_STS: +@@ -232,26 +241,9 @@ static irqreturn_t snd_cs5535audio_interrupt(int irq, void *dev_id) + case BM1_IRQ_STS: + process_bm1_irq(cs5535au); + break; +- case BM2_IRQ_STS: +- bm_stat = cs_readb(cs5535au, ACC_BM2_STATUS); +- break; +- case BM3_IRQ_STS: +- bm_stat = cs_readb(cs5535au, ACC_BM3_STATUS); +- break; +- case BM4_IRQ_STS: +- bm_stat = cs_readb(cs5535au, ACC_BM4_STATUS); +- break; +- case BM5_IRQ_STS: +- bm_stat = cs_readb(cs5535au, ACC_BM5_STATUS); +- break; +- case BM6_IRQ_STS: +- bm_stat = cs_readb(cs5535au, ACC_BM6_STATUS); +- break; +- case BM7_IRQ_STS: +- bm_stat = cs_readb(cs5535au, ACC_BM7_STATUS); +- break; + default: +- snd_printk(KERN_ERR "Unexpected irq src\n"); ++ snd_printk(KERN_ERR "Unexpected irq src: " ++ "0x%x\n", acc_irq_stat); + break; + } + } +diff --git a/sound/pci/cs5535audio/cs5535audio.h b/sound/pci/cs5535audio/cs5535audio.h +index 4fd1f31..ff82f10 100644 +--- a/sound/pci/cs5535audio/cs5535audio.h ++++ b/sound/pci/cs5535audio/cs5535audio.h +@@ -16,57 +16,28 @@ + #define ACC_IRQ_STATUS 0x12 + #define ACC_BM0_CMD 0x20 + #define ACC_BM1_CMD 0x28 +-#define ACC_BM2_CMD 0x30 +-#define ACC_BM3_CMD 0x38 +-#define ACC_BM4_CMD 0x40 +-#define ACC_BM5_CMD 0x48 +-#define ACC_BM6_CMD 0x50 +-#define ACC_BM7_CMD 0x58 + #define ACC_BM0_PRD 0x24 + #define ACC_BM1_PRD 0x2C +-#define ACC_BM2_PRD 0x34 +-#define ACC_BM3_PRD 0x3C +-#define ACC_BM4_PRD 0x44 +-#define ACC_BM5_PRD 0x4C +-#define ACC_BM6_PRD 0x54 +-#define ACC_BM7_PRD 0x5C + #define ACC_BM0_STATUS 0x21 + #define ACC_BM1_STATUS 0x29 +-#define ACC_BM2_STATUS 0x31 +-#define ACC_BM3_STATUS 0x39 +-#define ACC_BM4_STATUS 0x41 +-#define ACC_BM5_STATUS 0x49 +-#define ACC_BM6_STATUS 0x51 +-#define ACC_BM7_STATUS 0x59 + #define ACC_BM0_PNTR 0x60 + #define ACC_BM1_PNTR 0x64 +-#define ACC_BM2_PNTR 0x68 +-#define ACC_BM3_PNTR 0x6C +-#define ACC_BM4_PNTR 0x70 +-#define ACC_BM5_PNTR 0x74 +-#define ACC_BM6_PNTR 0x78 +-#define ACC_BM7_PNTR 0x7C ++ + /* acc_codec bar0 reg bits */ + /* ACC_IRQ_STATUS */ + #define IRQ_STS 0 + #define WU_IRQ_STS 1 + #define BM0_IRQ_STS 2 + #define BM1_IRQ_STS 3 +-#define BM2_IRQ_STS 4 +-#define BM3_IRQ_STS 5 +-#define BM4_IRQ_STS 6 +-#define BM5_IRQ_STS 7 +-#define BM6_IRQ_STS 8 +-#define BM7_IRQ_STS 9 + /* ACC_BMX_STATUS */ + #define EOP (1<<0) + #define BM_EOP_ERR (1<<1) + /* ACC_BMX_CTL */ +-#define BM_CTL_EN 0x00000001 +-#define BM_CTL_PAUSE 0x00000011 +-#define BM_CTL_DIS 0x00000000 +-#define BM_CTL_BYTE_ORD_LE 0x00000000 +-#define BM_CTL_BYTE_ORD_BE 0x00000100 ++#define BM_CTL_EN 0x01 ++#define BM_CTL_PAUSE 0x03 ++#define BM_CTL_DIS 0x00 ++#define BM_CTL_BYTE_ORD_LE 0x00 ++#define BM_CTL_BYTE_ORD_BE 0x04 + /* cs5535 specific ac97 codec register defines */ + #define CMD_MASK 0xFF00FFFF + #define CMD_NEW 0x00010000 +@@ -106,8 +77,8 @@ struct cs5535audio_dma { + struct snd_pcm_substream *substream; + unsigned int buf_addr, buf_bytes; + unsigned int period_bytes, periods; +- int suspended; + u32 saved_prd; ++ int pcm_open_flag; + }; + + struct cs5535audio { +@@ -123,8 +94,21 @@ struct cs5535audio { + struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS]; + }; + ++#ifdef CONFIG_PM + int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state); + int snd_cs5535audio_resume(struct pci_dev *pci); ++#endif ++ ++#ifdef CONFIG_OLPC ++void olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97) __devinit; ++int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) __devinit; ++int olpc_ai_enable(struct snd_ac97 *ac97, u8 val); ++#else ++#define olpc_prequirks(arg,arg2) do {} while (0) ++#define olpc_quirks(arg,arg2) (0) ++#define olpc_ai_enable(a, v) (0) ++#endif ++ + int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio); + + #endif /* __SOUND_CS5535AUDIO_H */ +diff --git a/sound/pci/cs5535audio/cs5535audio_olpc.c b/sound/pci/cs5535audio/cs5535audio_olpc.c +new file mode 100644 +index 0000000..791be73 +--- /dev/null ++++ b/sound/pci/cs5535audio/cs5535audio_olpc.c +@@ -0,0 +1,110 @@ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include "cs5535audio.h" ++ ++/* ++ * OLPC has an additional feature on top of the regular AD1888 codec features. ++ * It has an Analog Input mode that is switched into (after disabling the ++ * High Pass Filter) via GPIO. It is only supported on B2 and later models. ++ */ ++ ++int olpc_ai_enable(struct snd_ac97 *ac97, u8 val) ++{ ++ int err; ++ ++ /* ++ * update the High Pass Filter (via AC97_AD_TEST2), and then set ++ * Analog Input mode through a GPIO. ++ */ ++ ++ if (val) { ++ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2, ++ 1<type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; ++ uinfo->count = 1; ++ uinfo->value.integer.min = 0; ++ uinfo->value.integer.max = 1; ++ return 0; ++} ++ ++static int snd_cs5535audio_ai_get(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ ucontrol->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC, ++ GPIO_OUTPUT_VAL); ++ return 0; ++} ++ ++static int snd_cs5535audio_ai_put(struct snd_kcontrol *kcontrol, ++ struct snd_ctl_elem_value *ucontrol) ++{ ++ struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol); ++ struct snd_ac97 *ac97 = cs5535au->ac97; ++ ++ olpc_ai_enable(ac97, ucontrol->value.integer.value[0]); ++ ++ return 1; ++} ++ ++static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata = ++{ ++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, ++ .name = "DC Mode Enable", ++ .info = snd_cs5535audio_ai_info, ++ .get = snd_cs5535audio_ai_get, ++ .put = snd_cs5535audio_ai_put, ++ .private_value = 0 ++}; ++ ++void __devinit olpc_prequirks(struct snd_card *card, ++ struct snd_ac97_template *ac97) ++{ ++ /* Bail if this isn't an OLPC platform */ ++ if (!machine_is_olpc()) ++ return; ++ ++ /* If on an OLPC B3 or higher, invert EAPD. */ ++ if (olpc_rev_after(OLPC_REV_B2)) ++ ac97->scaps |= AC97_SCAP_INV_EAPD; ++} ++ ++int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) ++{ ++ struct snd_ctl_elem_id elem; ++ ++ /* Bail if this isn't an OLPC platform */ ++ if (!machine_is_olpc()) ++ return 0; ++ ++ /* drop the original ad1888 HPF control */ ++ memset(&elem, 0, sizeof(elem)); ++ elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER; ++ strcpy(elem.name, "High Pass Filter Enable"); ++ snd_ctl_remove_id(card, &elem); ++ ++ /* add the override for OLPC's HPF */ ++ return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls, ++ ac97->private_data)); ++} +diff --git a/sound/pci/cs5535audio/cs5535audio_pcm.c b/sound/pci/cs5535audio/cs5535audio_pcm.c +index 5450a9e..d23f8ea 100644 +--- a/sound/pci/cs5535audio/cs5535audio_pcm.c ++++ b/sound/pci/cs5535audio/cs5535audio_pcm.c +@@ -164,6 +164,7 @@ static int cs5535audio_build_dma_packets(struct cs5535audio *cs5535au, + jmpprd_addr = cpu_to_le32(lastdesc->addr + + (sizeof(struct cs5535audio_dma_desc)*periods)); + ++ dma->substream = substream; + dma->period_bytes = period_bytes; + dma->periods = periods; + spin_lock_irq(&cs5535au->reg_lock); +@@ -241,6 +242,7 @@ static void cs5535audio_clear_dma_packets(struct cs5535audio *cs5535au, + { + snd_dma_free_pages(&dma->desc_buf); + dma->desc_buf.area = NULL; ++ dma->substream = NULL; + } + + static int snd_cs5535audio_hw_params(struct snd_pcm_substream *substream, +@@ -260,6 +262,9 @@ static int snd_cs5535audio_hw_params(struct snd_pcm_substream *substream, + err = cs5535audio_build_dma_packets(cs5535au, dma, substream, + params_periods(hw_params), + params_period_bytes(hw_params)); ++ if (!err) ++ dma->pcm_open_flag = 1; ++ + return err; + } + +@@ -268,6 +273,15 @@ static int snd_cs5535audio_hw_free(struct snd_pcm_substream *substream) + struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream); + struct cs5535audio_dma *dma = substream->runtime->private_data; + ++ if (dma->pcm_open_flag) { ++ if (substream == cs5535au->playback_substream) ++ snd_ac97_update_power(cs5535au->ac97, ++ AC97_PCM_FRONT_DAC_RATE, 0); ++ else ++ snd_ac97_update_power(cs5535au->ac97, ++ AC97_PCM_LR_ADC_RATE, 0); ++ dma->pcm_open_flag = 0; ++ } + cs5535audio_clear_dma_packets(cs5535au, dma, substream); + return snd_pcm_lib_free_pages(substream); + } +@@ -298,14 +312,12 @@ static int snd_cs5535audio_trigger(struct snd_pcm_substream *substream, int cmd) + break; + case SNDRV_PCM_TRIGGER_RESUME: + dma->ops->enable_dma(cs5535au); +- dma->suspended = 0; + break; + case SNDRV_PCM_TRIGGER_STOP: + dma->ops->disable_dma(cs5535au); + break; + case SNDRV_PCM_TRIGGER_SUSPEND: + dma->ops->disable_dma(cs5535au); +- dma->suspended = 1; + break; + default: + snd_printk(KERN_ERR "unhandled trigger\n"); +@@ -344,6 +356,7 @@ static int snd_cs5535audio_capture_open(struct snd_pcm_substream *substream) + int err; + struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; ++ struct snd_ac97 *ac97 = cs5535au->ac97; + + runtime->hw = snd_cs5535audio_capture; + cs5535au->capture_substream = substream; +@@ -352,11 +365,29 @@ static int snd_cs5535audio_capture_open(struct snd_pcm_substream *substream) + if ((err = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS)) < 0) + return err; +- return 0; ++ ++#ifdef CONFIG_OLPC ++ /* Disable Analog Input */ ++ olpc_ai_enable(ac97, 0); ++ /* Enable V_ref bias while recording. */ ++ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<ac97; ++ ++ /* Disable Analog Input */ ++ olpc_ai_enable(ac97, 0); ++ /* Disable V_ref bias. */ ++ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<pcm); ++ snd_ac97_suspend(cs5535au->ac97); + for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) { + struct cs5535audio_dma *dma = &cs5535au->dmas[i]; +- if (dma && dma->substream && !dma->suspended) ++ if (dma && dma->substream) + dma->saved_prd = dma->ops->read_prd(cs5535au); + } +- snd_pcm_suspend_all(cs5535au->pcm); +- snd_ac97_suspend(cs5535au->ac97); + /* save important regs, then disable aclink in hw */ + snd_cs5535audio_stop_hardware(cs5535au); + ++ if (pci_save_state(pci)) { ++ printk(KERN_ERR "cs5535audio: pci_save_state failed!\n"); ++ return -EIO; ++ } + pci_disable_device(pci); +- pci_save_state(pci); + pci_set_power_state(pci, pci_choose_state(pci, state)); + return 0; + } +@@ -89,7 +92,12 @@ int snd_cs5535audio_resume(struct pci_dev *pci) + int i; + + pci_set_power_state(pci, PCI_D0); +- pci_restore_state(pci); ++ if (pci_restore_state(pci) < 0) { ++ printk(KERN_ERR "cs5535audio: pci_restore_state failed, " ++ "disabling device\n"); ++ snd_card_disconnect(card); ++ return -EIO; ++ } + if (pci_enable_device(pci) < 0) { + printk(KERN_ERR "cs5535audio: pci_enable_device failed, " + "disabling device\n"); +@@ -112,17 +120,17 @@ int snd_cs5535audio_resume(struct pci_dev *pci) + if (!timeout) + snd_printk(KERN_ERR "Failure getting AC Link ready\n"); + +- /* we depend on ac97 to perform the codec power up */ +- snd_ac97_resume(cs5535au->ac97); + /* set up rate regs, dma. actual initiation is done in trig */ + for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) { + struct cs5535audio_dma *dma = &cs5535au->dmas[i]; +- if (dma && dma->substream && dma->suspended) { ++ if (dma && dma->substream) { + dma->substream->ops->prepare(dma->substream); + dma->ops->setup_prd(cs5535au, dma->saved_prd); + } + } +- ++ ++ /* we depend on ac97 to perform the codec power up */ ++ snd_ac97_resume(cs5535au->ac97); + snd_power_change_state(card, SNDRV_CTL_POWER_D0); + + return 0; diff --git a/target/linux/olpc/patches/200-fix_dcon_id.patch b/target/linux/olpc/patches/200-fix_dcon_id.patch new file mode 100644 index 0000000000..5a130f496d --- /dev/null +++ b/target/linux/olpc/patches/200-fix_dcon_id.patch @@ -0,0 +1,11 @@ +diff -purN -purN a/include/linux/i2c-id.h b/include/linux/i2c-id.h +--- a/include/linux/i2c-id.h 2007-08-21 06:33:06.000000000 +0200 ++++ b/include/linux/i2c-id.h 2007-09-10 09:20:58.000000000 +0200 +@@ -119,6 +119,7 @@ + #define I2C_DRIVERID_WM8750 90 /* Wolfson WM8750 audio codec */ + #define I2C_DRIVERID_WM8753 91 /* Wolfson WM8753 audio codec */ + #define I2C_DRIVERID_LM4857 92 /* LM4857 Audio Amplifier */ ++#define I2C_DRIVERID_DCON 93 + + #define I2C_DRIVERID_I2CDEV 900 + #define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */ diff --git a/target/linux/olpc/patches/300-block2mtd_init.patch b/target/linux/olpc/patches/300-block2mtd_init.patch new file mode 100644 index 0000000000..5d81f2fcfc --- /dev/null +++ b/target/linux/olpc/patches/300-block2mtd_init.patch @@ -0,0 +1,234 @@ +Index: linux-2.6.23/drivers/mtd/devices/block2mtd.c +=================================================================== +--- linux-2.6.23.orig/drivers/mtd/devices/block2mtd.c 2007-10-25 21:43:40.854599193 +0200 ++++ linux-2.6.23/drivers/mtd/devices/block2mtd.c 2007-10-25 22:23:19.066125745 +0200 +@@ -20,6 +20,7 @@ + #include + #include + #include ++#include + + #define VERSION "$Revision: 1.30 $" + +@@ -27,6 +28,12 @@ + #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args) + #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args) + ++struct retry { ++ struct list_head list; ++ const char *val; ++}; ++ ++static LIST_HEAD(retry_list); + + /* Info for the block device */ + struct block2mtd_dev { +@@ -38,10 +45,36 @@ + char devname[0]; + }; + ++static int block2mtd_setup2(const char *val); + + /* Static info about the MTD, used in cleanup_module */ + static LIST_HEAD(blkmtd_device_list); + ++static int add_retry(const char *val) ++{ ++ struct retry *r = kmalloc(sizeof(struct retry), GFP_KERNEL); ++ ++ INIT_LIST_HEAD(&r->list); ++ r->val = val; ++ list_add(&r->list, &retry_list); ++ ++ return 0; ++} ++ ++static int __init process_retries(void) ++{ ++ struct list_head *p, *tmp; ++ ++ list_for_each_safe(p, tmp, &retry_list) { ++ struct retry *r = list_entry(p, struct retry, list); ++ block2mtd_setup2(r->val); ++ msleep(100); ++ list_del(p); ++ kfree(r); ++ } ++ return 0; ++} ++rootfs_initcall(process_retries); + + static struct page *page_read(struct address_space *mapping, int index) + { +@@ -518,7 +551,10 @@ + if (token[2] && (strlen(token[2]) + 1 > 80)) + parse_err("mtd device name too long"); + +- add_device(name, erase_size, token[2]); ++ if (add_device(name, erase_size, token[2]) == NULL) { ++ add_retry(val); ++ return 0; ++ } + + return 0; + } +@@ -534,8 +570,11 @@ + and block2mtd_init() has already been called, + we can parse the argument now. */ + +- if (block2mtd_init_called) ++ if (block2mtd_init_called) { ++ /* if the call failed (e.g. because the device does not exist yet) ++ * then try again just before attempting to mount the rootfs */ + return block2mtd_setup2(val); ++ } + + /* During early boot stage, we only save the parameters + here. We must parse them later: if the param passed +Index: linux-2.6.23/init/do_mounts.c +=================================================================== +--- linux-2.6.23.orig/init/do_mounts.c 2007-10-25 21:39:41.824977672 +0200 ++++ linux-2.6.23/init/do_mounts.c 2007-10-25 21:41:22.466712918 +0200 +@@ -241,16 +241,8 @@ + return 1; + } + +-static unsigned int __initdata root_delay; +-static int __init root_delay_setup(char *str) +-{ +- root_delay = simple_strtoul(str, NULL, 0); +- return 1; +-} +- + __setup("rootflags=", root_data_setup); + __setup("rootfstype=", fs_names_setup); +-__setup("rootdelay=", root_delay_setup); + + static void __init get_fs_names(char *page) + { +@@ -426,18 +418,6 @@ + { + int is_floppy; + +- if (root_delay) { +- printk(KERN_INFO "Waiting %dsec before mounting root device...\n", +- root_delay); +- ssleep(root_delay); +- } +- +- /* wait for the known devices to complete their probing */ +- while (driver_probe_done() != 0) +- msleep(100); +- +- md_run_setup(); +- + if (saved_root_name[0]) { + root_device_name = saved_root_name; + if (!strncmp(root_device_name, "mtd", 3)) { +Index: linux-2.6.23/init/main.c +=================================================================== +--- linux-2.6.23.orig/init/main.c 2007-10-25 21:35:50.567799083 +0200 ++++ linux-2.6.23/init/main.c 2007-10-25 21:56:43.279187031 +0200 +@@ -65,6 +65,7 @@ + #ifdef CONFIG_X86_LOCAL_APIC + #include + #endif ++#include "do_mounts.h" + + /* + * This is one of the first .c files built. Error out early if we have compiler +@@ -662,13 +663,14 @@ + __setup("initcall_debug", initcall_debug_setup); + + extern initcall_t __initcall_start[], __initcall_end[]; ++extern initcall_t __root_initcall_start[], __root_initcall_end[]; + +-static void __init do_initcalls(void) ++static void __init do_initcalls(initcall_t *start, initcall_t *end) + { + initcall_t *call; + int count = preempt_count(); + +- for (call = __initcall_start; call < __initcall_end; call++) { ++ for (call = start; call < end; call++) { + ktime_t t0, t1, delta; + char *msg = NULL; + char msgbuf[40]; +@@ -737,7 +739,7 @@ + usermodehelper_init(); + driver_init(); + init_irq_proc(); +- do_initcalls(); ++ do_initcalls(__initcall_start, __initcall_end); + } + + static int __initdata nosoftlockup; +@@ -810,6 +812,14 @@ + panic("No init found. Try passing init= option to kernel."); + } + ++static unsigned int __initdata root_delay; ++static int __init root_delay_setup(char *str) ++{ ++ root_delay = simple_strtoul(str, NULL, 0); ++ return 1; ++} ++__setup("rootdelay=", root_delay_setup); ++ + static int __init kernel_init(void * unused) + { + lock_kernel(); +@@ -851,6 +861,17 @@ + + if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) { + ramdisk_execute_command = NULL; ++ if (root_delay) { ++ printk(KERN_INFO "Waiting %dsec before mounting root device...\n", ++ root_delay); ++ ssleep(root_delay); ++ } ++ /* wait for the known devices to complete their probing */ ++ while (driver_probe_done() != 0) ++ msleep(100); ++ md_run_setup(); ++ do_initcalls(__root_initcall_start, __root_initcall_end); ++ + prepare_namespace(); + } + +Index: linux-2.6.23/arch/i386/kernel/vmlinux.lds.S +=================================================================== +--- linux-2.6.23.orig/arch/i386/kernel/vmlinux.lds.S 2007-10-26 00:07:08.465118962 +0200 ++++ linux-2.6.23/arch/i386/kernel/vmlinux.lds.S 2007-10-26 00:10:15.259763782 +0200 +@@ -146,6 +146,11 @@ + INITCALLS + __initcall_end = .; + } ++ .root_initcall.init : AT(ADDR(.root_initcall.init) - LOAD_OFFSET) { ++ __root_initcall_start = .; ++ INITCALLS_ROOT ++ __root_initcall_end = .; ++ } + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { + __con_initcall_start = .; + *(.con_initcall.init) +Index: linux-2.6.23/include/asm-generic/vmlinux.lds.h +=================================================================== +--- linux-2.6.23.orig/include/asm-generic/vmlinux.lds.h 2007-10-26 00:08:46.558708993 +0200 ++++ linux-2.6.23/include/asm-generic/vmlinux.lds.h 2007-10-26 00:09:24.296859571 +0200 +@@ -243,12 +243,14 @@ + *(.initcall4s.init) \ + *(.initcall5.init) \ + *(.initcall5s.init) \ +- *(.initcallrootfs.init) \ + *(.initcall6.init) \ + *(.initcall6s.init) \ + *(.initcall7.init) \ + *(.initcall7s.init) + ++#define INITCALLS_ROOT \ ++ *(.initcallrootfs.init) ++ + #define PERCPU(align) \ + . = ALIGN(align); \ + __per_cpu_start = .; \