From: Gabor Juhos Date: Tue, 8 Jun 2010 20:18:00 +0000 (+0000) Subject: ip17xx: Cosmetic cleanups X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b3073617a5d6d09b99cb06e73168d2bc55a24ebd;p=openwrt%2Fstaging%2Fneocturne.git ip17xx: Cosmetic cleanups Trying to unify capitalization and formatting of comments. Writing of periods at the end of comments is however still inconsistent. Signed-off-by: Martin Mares Signed-off-by: Patrick Horn SVN-Revision: 21710 --- diff --git a/target/linux/generic-2.6/files/drivers/net/phy/ip175c.c b/target/linux/generic-2.6/files/drivers/net/phy/ip175c.c index cf22908825..00144e8864 100644 --- a/target/linux/generic-2.6/files/drivers/net/phy/ip175c.c +++ b/target/linux/generic-2.6/files/drivers/net/phy/ip175c.c @@ -43,7 +43,7 @@ typedef char bitnum; /*********** CONSTANTS ***********/ struct register_mappings { char *NAME; - u16 MODEL_NO; // compare to bits 4-9 of MII register 0,3. + u16 MODEL_NO; // Compare to bits 4-9 of MII register 0,3. bitnum NUM_PORTS; bitnum CPU_PORT; @@ -201,11 +201,8 @@ static const struct register_mappings IP175A = { .SIMPLE_VLAN_REGISTERS = 0, - // Register 19-21 documentation is missing/contradictory. - // For registers 19-21 ports need to be: even numbers to MSB, odd to LSB. - // This contradicts text for ROM registers, but follows logic of CoS bits. - - .VLAN_LOOKUP_REG = {0,19},// +N/2 + // Only programmable via EEPROM + .VLAN_LOOKUP_REG = NOTSUPPORTED,// +N/2 .VLAN_LOOKUP_REG_5 = NOTSUPPORTED, .VLAN_LOOKUP_EVEN_BIT = {8,9,10,11,12,-1,-1,-1,-1}, .VLAN_LOOKUP_ODD_BIT = {0,1,2,3,4,-1,-1,-1,-1}, @@ -250,11 +247,12 @@ struct ip175c_state { int num_vlans; unsigned int vlan_ports[MAX_VLANS]; const struct register_mappings *regs; - reg proc_mii; /*!< phy/reg for the low level register access via /proc */ + reg proc_mii; // phy/reg for the low level register access via swconfig char buf[80]; }; + static int ip_phy_read(struct ip175c_state *state, int port, int reg) { int val = mdiobus_read(state->mii_bus, port, reg); @@ -267,7 +265,6 @@ static int ip_phy_read(struct ip175c_state *state, int port, int reg) return val; } - static int ip_phy_write(struct ip175c_state *state, int port, int reg, u16 val) { int err; @@ -281,7 +278,6 @@ static int ip_phy_write(struct ip175c_state *state, int port, int reg, u16 val) return err; } - static int ip_phy_write_masked(struct ip175c_state *state, int port, int reg, unsigned int mask, unsigned int data) { int val = ip_phy_read(state, port, reg); @@ -310,6 +306,7 @@ static int setPhy(struct ip175c_state *state, reg mii, u16 value) return 0; } + /** * These two macros are to simplify the mapping of logical bits to the bits in hardware. * NOTE: these macros will return if there is an error! @@ -344,6 +341,7 @@ static int setPhy(struct ip175c_state *state, reg mii, u16 value) return val; \ } while (0) + static int get_model(struct ip175c_state *state) { reg oui_id_reg = {0, 2}; @@ -412,7 +410,6 @@ static int get_flags(struct ip175c_state *state) state->num_vlans+=1; // does not include WAN. } - val = getPhy(state, state->regs->VLAN_CONTROL_REG); if (val < 0) { return 0; @@ -422,7 +419,8 @@ static int get_flags(struct ip175c_state *state) return 0; } -/** Get all state variables for VLAN mappings and port-based tagging. **/ + +/** Get all state variables for VLAN mappings and port-based tagging **/ static int get_state(struct ip175c_state *state) { int i, j; @@ -521,7 +519,6 @@ static int get_state(struct ip175c_state *state) return 0; } - /** Only update vlan and router flags in the switch **/ static int update_flags(struct ip175c_state *state) { @@ -635,15 +632,11 @@ static int update_state(struct ip175c_state *state) } return update_flags(state); - - // software reset: 30.0 = 0x175C - // wait 2ms - // reset ports 0,1,2,3,4 } -/* - Uses only the VLAN port mask and the add tag mask to generate the other fields: - which ports are part of the same VLAN, removing vlan tags, and VLAN tag ids. +/** + * Uses only the VLAN port mask and the add tag mask to generate the other fields: + * which ports are part of the same VLAN, removing vlan tags, and VLAN tag ids. */ static void correct_vlan_state(struct ip175c_state *state) { @@ -651,16 +644,14 @@ static void correct_vlan_state(struct ip175c_state *state) state->num_vlans = 0; for (i=0; ivlan_ports[i] != 0) { - state->num_vlans = i+1; //hack -- we need to store the "set" vlans somewhere... + state->num_vlans = i+1; // Hack -- we need to store the "set" vlans somewhere... } } - - for (i=0; iregs->NUM_PORTS; i++) { unsigned int portmask = (1<vlan_enabled) { - // share with everybody! + // Share with everybody! state->ports[i].shareports = (1<regs->NUM_PORTS)-1; continue; } @@ -678,7 +669,7 @@ static int ip175c_get_enable_vlan(struct switch_dev *dev, const struct switch_at struct ip175c_state *state = dev->priv; int err; - err = get_state(state); // may be set in get_state. + err = get_state(state); // May be set in get_state. if (err < 0) return err; val->value.i = state->vlan_enabled; @@ -698,7 +689,7 @@ static int ip175c_set_enable_vlan(struct switch_dev *dev, const struct switch_at enable = val->value.i; if (state->vlan_enabled == enable) { - // do not change any state. + // Do not change any state. return 0; } state->vlan_enabled = enable; @@ -713,11 +704,11 @@ static int ip175c_set_enable_vlan(struct switch_dev *dev, const struct switch_at state->vlan_ports[i] = 0x0; if (state->vlan_enabled) { - // updates other fields only based off vlan_ports and add_tag fields. + // Updates other fields only based off vlan_ports and add_tag fields. // Note that by default, no ports are in any vlans. correct_vlan_state(state); } - // ensure sane defaults? + // Ensure sane defaults? return update_state(state); } @@ -793,7 +784,7 @@ static int ip175c_apply(struct switch_dev *dev) if (err < 0) return err; - if (REG_SUPP(state->regs->MII_REGISTER_EN)){ + if (REG_SUPP(state->regs->MII_REGISTER_EN)) { int val = getPhy(state, state->regs->MII_REGISTER_EN); if (val < 0) { return val; @@ -819,9 +810,11 @@ static int ip175c_reset(struct switch_dev *dev) return err; err = getPhy(state, state->regs->RESET_REG); - /* data sheet specifies reset period is 2 msec - (don't see any mention of the 2ms delay in the IP178C spec, only - in IP175C, but it can't hurt.) */ + /* + * Data sheet specifies reset period to be 2 msec. + * (I don't see any mention of the 2ms delay in the IP178C spec, only + * in IP175C, but it can't hurt.) + */ mdelay(2); } @@ -842,7 +835,6 @@ static int ip175c_reset(struct switch_dev *dev) return 0; } -/*! get the current register number */ static int ip175c_get_tagged(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) { struct ip175c_state *state = dev->priv; @@ -866,7 +858,6 @@ static int ip175c_get_tagged(struct switch_dev *dev, const struct switch_attr *a return 0; } -/*! set a new register address for low level access to registers */ static int ip175c_set_tagged(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) { struct ip175c_state *state = dev->priv; @@ -892,10 +883,7 @@ static int ip175c_set_tagged(struct switch_dev *dev, const struct switch_attr *a return err; } - -/* low level /proc procedures */ - -/*! get the current phy address */ +/** Get the current phy address */ static int ip175c_get_phy(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) { struct ip175c_state *state = dev->priv; @@ -904,7 +892,7 @@ static int ip175c_get_phy(struct switch_dev *dev, const struct switch_attr *attr return 0; } -/*! set a new phy address for low level access to registers */ +/** Set a new phy address for low level access to registers */ static int ip175c_set_phy(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) { struct ip175c_state *state = dev->priv; @@ -917,7 +905,7 @@ static int ip175c_set_phy(struct switch_dev *dev, const struct switch_attr *attr return 0; } -/*! get the current register number */ +/** Get the current register number */ static int ip175c_get_reg(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) { struct ip175c_state *state = dev->priv; @@ -926,7 +914,7 @@ static int ip175c_get_reg(struct switch_dev *dev, const struct switch_attr *attr return 0; } -/*! set a new register address for low level access to registers */ +/** Set a new register address for low level access to registers */ static int ip175c_set_reg(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) { struct ip175c_state *state = dev->priv; @@ -939,7 +927,7 @@ static int ip175c_set_reg(struct switch_dev *dev, const struct switch_attr *attr return 0; } -/*! get the register content of state->proc_mii */ +/** Get the register content of state->proc_mii */ static int ip175c_get_val(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) { struct ip175c_state *state = dev->priv; @@ -955,7 +943,7 @@ static int ip175c_get_val(struct switch_dev *dev, const struct switch_attr *attr } } -/*! write a value to the register defined by phy/reg above */ +/** Write a value to the register defined by phy/reg above */ static int ip175c_set_val(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) { struct ip175c_state *state = dev->priv; @@ -971,11 +959,10 @@ static int ip175c_set_val(struct switch_dev *dev, const struct switch_attr *attr static int ip175c_read_name(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) { struct ip175c_state *state = dev->priv; - val->value.s = state->regs->NAME; // just a const pointer, won't be freed by swconfig. + val->value.s = state->regs->NAME; // Just a const pointer, won't be freed by swconfig. return 0; } - static int ip175c_set_port_speed(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) { struct ip175c_state *state = dev->priv; @@ -994,7 +981,7 @@ static int ip175c_set_port_speed(struct switch_dev *dev, const struct switch_att speed = 1; } - /* can't set speed for cpu port */ + /* Can't set speed for cpu port */ if (nr == state->regs->CPU_PORT) return -EINVAL; @@ -1040,7 +1027,6 @@ static int ip175c_get_port_speed(struct switch_dev *dev, const struct switch_att return 0; } - static int ip175c_get_port_status(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) { struct ip175c_state *state = dev->priv; @@ -1143,7 +1129,7 @@ static const struct switch_attr ip175c_global[] = { [IP175C_REGISTER_PHY] = { .id = IP175C_REGISTER_PHY, .type = SWITCH_TYPE_INT, - .description = "Direct register access: set phy (0-4, or 29,30,31)", + .description = "Direct register access: set PHY (0-4, or 29,30,31)", .name = "phy", .get = ip175c_get_phy, .set = ip175c_set_phy, @@ -1151,7 +1137,7 @@ static const struct switch_attr ip175c_global[] = { [IP175C_REGISTER_MII] = { .id = IP175C_REGISTER_MII, .type = SWITCH_TYPE_INT, - .description = "Direct register access: set mii number (0-31)", + .description = "Direct register access: set MII register number (0-31)", .name = "reg", .get = ip175c_get_reg, .set = ip175c_set_reg, @@ -1202,7 +1188,7 @@ static int ip175c_probe(struct phy_device *pdev) struct switch_dev *dev; int err; - /* we only attach to PHY 0, but use all available PHYs */ + /* We only attach to PHY 0, but use all available PHYs */ if (pdev->addr != 0) return -ENODEV; @@ -1336,4 +1322,3 @@ MODULE_LICENSE("GPL"); module_init(ip175c_init); module_exit(ip175c_exit); -