From: David Kilroy Date: Fri, 31 Oct 2008 13:35:21 +0000 (+0000) Subject: orinoco: Move sources to a subdirectory X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b2e53b338b7b4608372d070bb477f3bae3971e5a;p=openwrt%2Fstaging%2Fblogic.git orinoco: Move sources to a subdirectory Keeping all the orinoco drivers in a common directory will make maintenance easier. Signed-off by: David Kilroy Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 59d2d805f60b..78820840fe21 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -16,14 +16,7 @@ obj-$(CONFIG_WAVELAN) += wavelan.o obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan_cs.o -obj-$(CONFIG_HERMES) += orinoco.o hermes.o hermes_dld.o -obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o -obj-$(CONFIG_APPLE_AIRPORT) += airport.o -obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o -obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o -obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o -obj-$(CONFIG_NORTEL_HERMES) += orinoco_nortel.o -obj-$(CONFIG_PCMCIA_SPECTRUM) += spectrum_cs.o +obj-$(CONFIG_HERMES) += orinoco/ obj-$(CONFIG_AIRO) += airo.o obj-$(CONFIG_AIRO_CS) += airo_cs.o airo.o diff --git a/drivers/net/wireless/airport.c b/drivers/net/wireless/airport.c deleted file mode 100644 index ce03a2e865fa..000000000000 --- a/drivers/net/wireless/airport.c +++ /dev/null @@ -1,286 +0,0 @@ -/* airport.c - * - * A driver for "Hermes" chipset based Apple Airport wireless - * card. - * - * Copyright notice & release notes in file orinoco.c - * - * Note specific to airport stub: - * - * 0.05 : first version of the new split driver - * 0.06 : fix possible hang on powerup, add sleep support - */ - -#define DRIVER_NAME "airport" -#define PFX DRIVER_NAME ": " - -#include -#include -#include -#include -#include - -#include "orinoco.h" - -#define AIRPORT_IO_LEN (0x1000) /* one page */ - -struct airport { - struct macio_dev *mdev; - void __iomem *vaddr; - int irq_requested; - int ndev_registered; -}; - -static int -airport_suspend(struct macio_dev *mdev, pm_message_t state) -{ - struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - int err; - - printk(KERN_DEBUG "%s: Airport entering sleep mode\n", dev->name); - - err = orinoco_lock(priv, &flags); - if (err) { - printk(KERN_ERR "%s: hw_unavailable on PBOOK_SLEEP_NOW\n", - dev->name); - return 0; - } - - err = __orinoco_down(dev); - if (err) - printk(KERN_WARNING "%s: PBOOK_SLEEP_NOW: Error %d downing interface\n", - dev->name, err); - - netif_device_detach(dev); - - priv->hw_unavailable++; - - orinoco_unlock(priv, &flags); - - disable_irq(dev->irq); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0); - - return 0; -} - -static int -airport_resume(struct macio_dev *mdev) -{ - struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - int err; - - printk(KERN_DEBUG "%s: Airport waking up\n", dev->name); - - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1); - msleep(200); - - enable_irq(dev->irq); - - err = orinoco_reinit_firmware(dev); - if (err) { - printk(KERN_ERR "%s: Error %d re-initializing firmware on PBOOK_WAKE\n", - dev->name, err); - return 0; - } - - spin_lock_irqsave(&priv->lock, flags); - - netif_device_attach(dev); - - priv->hw_unavailable--; - - if (priv->open && (! priv->hw_unavailable)) { - err = __orinoco_up(dev); - if (err) - printk(KERN_ERR "%s: Error %d restarting card on PBOOK_WAKE\n", - dev->name, err); - } - - - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -static int -airport_detach(struct macio_dev *mdev) -{ - struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); - struct orinoco_private *priv = netdev_priv(dev); - struct airport *card = priv->card; - - if (card->ndev_registered) - unregister_netdev(dev); - card->ndev_registered = 0; - - if (card->irq_requested) - free_irq(dev->irq, dev); - card->irq_requested = 0; - - if (card->vaddr) - iounmap(card->vaddr); - card->vaddr = NULL; - - macio_release_resource(mdev, 0); - - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0); - ssleep(1); - - macio_set_drvdata(mdev, NULL); - free_orinocodev(dev); - - return 0; -} - -static int airport_hard_reset(struct orinoco_private *priv) -{ - /* It would be nice to power cycle the Airport for a real hard - * reset, but for some reason although it appears to - * re-initialize properly, it falls in a screaming heap - * shortly afterwards. */ -#if 0 - struct net_device *dev = priv->ndev; - struct airport *card = priv->card; - - /* Vitally important. If we don't do this it seems we get an - * interrupt somewhere during the power cycle, since - * hw_unavailable is already set it doesn't get ACKed, we get - * into an interrupt loop and the PMU decides to turn us - * off. */ - disable_irq(dev->irq); - - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 0); - ssleep(1); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 1); - ssleep(1); - - enable_irq(dev->irq); - ssleep(1); -#endif - - return 0; -} - -static int -airport_attach(struct macio_dev *mdev, const struct of_device_id *match) -{ - struct orinoco_private *priv; - struct net_device *dev; - struct airport *card; - unsigned long phys_addr; - hermes_t *hw; - - if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) { - printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n"); - return -ENODEV; - } - - /* Allocate space for private device-specific data */ - dev = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev, - airport_hard_reset, NULL); - if (! dev) { - printk(KERN_ERR PFX "Cannot allocate network device\n"); - return -ENODEV; - } - priv = netdev_priv(dev); - card = priv->card; - - hw = &priv->hw; - card->mdev = mdev; - - if (macio_request_resource(mdev, 0, "airport")) { - printk(KERN_ERR PFX "can't request IO resource !\n"); - free_orinocodev(dev); - return -EBUSY; - } - - SET_NETDEV_DEV(dev, &mdev->ofdev.dev); - - macio_set_drvdata(mdev, dev); - - /* Setup interrupts & base address */ - dev->irq = macio_irq(mdev, 0); - phys_addr = macio_resource_start(mdev, 0); /* Physical address */ - printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr); - dev->base_addr = phys_addr; - card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN); - if (!card->vaddr) { - printk(KERN_ERR PFX "ioremap() failed\n"); - goto failed; - } - - hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING); - - /* Power up card */ - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1); - ssleep(1); - - /* Reset it before we get the interrupt */ - hermes_init(hw); - - if (request_irq(dev->irq, orinoco_interrupt, 0, dev->name, dev)) { - printk(KERN_ERR PFX "Couldn't get IRQ %d\n", dev->irq); - goto failed; - } - card->irq_requested = 1; - - /* Tell the stack we exist */ - if (register_netdev(dev) != 0) { - printk(KERN_ERR PFX "register_netdev() failed\n"); - goto failed; - } - printk(KERN_DEBUG PFX "Card registered for interface %s\n", dev->name); - card->ndev_registered = 1; - return 0; - failed: - airport_detach(mdev); - return -ENODEV; -} /* airport_attach */ - - -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Benjamin Herrenschmidt )"; -MODULE_AUTHOR("Benjamin Herrenschmidt "); -MODULE_DESCRIPTION("Driver for the Apple Airport wireless card."); -MODULE_LICENSE("Dual MPL/GPL"); - -static struct of_device_id airport_match[] = -{ - { - .name = "radio", - }, - {}, -}; - -MODULE_DEVICE_TABLE (of, airport_match); - -static struct macio_driver airport_driver = -{ - .name = DRIVER_NAME, - .match_table = airport_match, - .probe = airport_attach, - .remove = airport_detach, - .suspend = airport_suspend, - .resume = airport_resume, -}; - -static int __init -init_airport(void) -{ - printk(KERN_DEBUG "%s\n", version); - - return macio_register_driver(&airport_driver); -} - -static void __exit -exit_airport(void) -{ - return macio_unregister_driver(&airport_driver); -} - -module_init(init_airport); -module_exit(exit_airport); diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c deleted file mode 100644 index bfa375369df3..000000000000 --- a/drivers/net/wireless/hermes.c +++ /dev/null @@ -1,544 +0,0 @@ -/* hermes.c - * - * Driver core for the "Hermes" wireless MAC controller, as used in - * the Lucent Orinoco and Cabletron RoamAbout cards. It should also - * work on the hfa3841 and hfa3842 MAC controller chips used in the - * Prism II chipsets. - * - * This is not a complete driver, just low-level access routines for - * the MAC controller itself. - * - * Based on the prism2 driver from Absolute Value Systems' linux-wlan - * project, the Linux wvlan_cs driver, Lucent's HCF-Light - * (wvlan_hcf.c) library, and the NetBSD wireless driver (in no - * particular order). - * - * Copyright (C) 2000, David Gibson, Linuxcare Australia. - * (C) Copyright David Gibson, IBM Corp. 2001-2003. - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#include -#include -#include -#include - -#include "hermes.h" - -MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset and Prism II HFA384x wireless MAC controller"); -MODULE_AUTHOR("Pavel Roskin " - " & David Gibson "); -MODULE_LICENSE("Dual MPL/GPL"); - -/* These are maximum timeouts. Most often, card wil react much faster */ -#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */ -#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */ -#define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */ -#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */ - -/* - * Debugging helpers - */ - -#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \ - printk(stuff);} while (0) - -#undef HERMES_DEBUG -#ifdef HERMES_DEBUG -#include - -#define DEBUG(lvl, stuff...) if ( (lvl) <= HERMES_DEBUG) DMSG(stuff) - -#else /* ! HERMES_DEBUG */ - -#define DEBUG(lvl, stuff...) do { } while (0) - -#endif /* ! HERMES_DEBUG */ - - -/* - * Internal functions - */ - -/* Issue a command to the chip. Waiting for it to complete is the caller's - problem. - - Returns -EBUSY if the command register is busy, 0 on success. - - Callable from any context. -*/ -static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0, - u16 param1, u16 param2) -{ - int k = CMD_BUSY_TIMEOUT; - u16 reg; - - /* First wait for the command register to unbusy */ - reg = hermes_read_regn(hw, CMD); - while ( (reg & HERMES_CMD_BUSY) && k ) { - k--; - udelay(1); - reg = hermes_read_regn(hw, CMD); - } - if (reg & HERMES_CMD_BUSY) { - return -EBUSY; - } - - hermes_write_regn(hw, PARAM2, param2); - hermes_write_regn(hw, PARAM1, param1); - hermes_write_regn(hw, PARAM0, param0); - hermes_write_regn(hw, CMD, cmd); - - return 0; -} - -/* - * Function definitions - */ - -/* For doing cmds that wipe the magic constant in SWSUPPORT0 */ -int hermes_doicmd_wait(hermes_t *hw, u16 cmd, - u16 parm0, u16 parm1, u16 parm2, - struct hermes_response *resp) -{ - int err = 0; - int k; - u16 status, reg; - - err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2); - if (err) - return err; - - reg = hermes_read_regn(hw, EVSTAT); - k = CMD_INIT_TIMEOUT; - while ((!(reg & HERMES_EV_CMD)) && k) { - k--; - udelay(10); - reg = hermes_read_regn(hw, EVSTAT); - } - - hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC); - - if (!hermes_present(hw)) { - DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n", - hw->iobase); - err = -ENODEV; - goto out; - } - - if (!(reg & HERMES_EV_CMD)) { - printk(KERN_ERR "hermes @ %p: " - "Timeout waiting for card to reset (reg=0x%04x)!\n", - hw->iobase, reg); - err = -ETIMEDOUT; - goto out; - } - - status = hermes_read_regn(hw, STATUS); - if (resp) { - resp->status = status; - resp->resp0 = hermes_read_regn(hw, RESP0); - resp->resp1 = hermes_read_regn(hw, RESP1); - resp->resp2 = hermes_read_regn(hw, RESP2); - } - - hermes_write_regn(hw, EVACK, HERMES_EV_CMD); - - if (status & HERMES_STATUS_RESULT) - err = -EIO; -out: - return err; -} -EXPORT_SYMBOL(hermes_doicmd_wait); - -void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing) -{ - hw->iobase = address; - hw->reg_spacing = reg_spacing; - hw->inten = 0x0; -} -EXPORT_SYMBOL(hermes_struct_init); - -int hermes_init(hermes_t *hw) -{ - u16 reg; - int err = 0; - int k; - - /* We don't want to be interrupted while resetting the chipset */ - hw->inten = 0x0; - hermes_write_regn(hw, INTEN, 0); - hermes_write_regn(hw, EVACK, 0xffff); - - /* Normally it's a "can't happen" for the command register to - be busy when we go to issue a command because we are - serializing all commands. However we want to have some - chance of resetting the card even if it gets into a stupid - state, so we actually wait to see if the command register - will unbusy itself here. */ - k = CMD_BUSY_TIMEOUT; - reg = hermes_read_regn(hw, CMD); - while (k && (reg & HERMES_CMD_BUSY)) { - if (reg == 0xffff) /* Special case - the card has probably been removed, - so don't wait for the timeout */ - return -ENODEV; - - k--; - udelay(1); - reg = hermes_read_regn(hw, CMD); - } - - /* No need to explicitly handle the timeout - if we've timed - out hermes_issue_cmd() will probably return -EBUSY below */ - - /* According to the documentation, EVSTAT may contain - obsolete event occurrence information. We have to acknowledge - it by writing EVACK. */ - reg = hermes_read_regn(hw, EVSTAT); - hermes_write_regn(hw, EVACK, reg); - - /* We don't use hermes_docmd_wait here, because the reset wipes - the magic constant in SWSUPPORT0 away, and it gets confused */ - err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL); - - return err; -} -EXPORT_SYMBOL(hermes_init); - -/* Issue a command to the chip, and (busy!) wait for it to - * complete. - * - * Returns: < 0 on internal error, 0 on success, > 0 on error returned by the firmware - * - * Callable from any context, but locking is your problem. */ -int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, - struct hermes_response *resp) -{ - int err; - int k; - u16 reg; - u16 status; - - err = hermes_issue_cmd(hw, cmd, parm0, 0, 0); - if (err) { - if (! hermes_present(hw)) { - if (net_ratelimit()) - printk(KERN_WARNING "hermes @ %p: " - "Card removed while issuing command " - "0x%04x.\n", hw->iobase, cmd); - err = -ENODEV; - } else - if (net_ratelimit()) - printk(KERN_ERR "hermes @ %p: " - "Error %d issuing command 0x%04x.\n", - hw->iobase, err, cmd); - goto out; - } - - reg = hermes_read_regn(hw, EVSTAT); - k = CMD_COMPL_TIMEOUT; - while ( (! (reg & HERMES_EV_CMD)) && k) { - k--; - udelay(10); - reg = hermes_read_regn(hw, EVSTAT); - } - - if (! hermes_present(hw)) { - printk(KERN_WARNING "hermes @ %p: Card removed " - "while waiting for command 0x%04x completion.\n", - hw->iobase, cmd); - err = -ENODEV; - goto out; - } - - if (! (reg & HERMES_EV_CMD)) { - printk(KERN_ERR "hermes @ %p: Timeout waiting for " - "command 0x%04x completion.\n", hw->iobase, cmd); - err = -ETIMEDOUT; - goto out; - } - - status = hermes_read_regn(hw, STATUS); - if (resp) { - resp->status = status; - resp->resp0 = hermes_read_regn(hw, RESP0); - resp->resp1 = hermes_read_regn(hw, RESP1); - resp->resp2 = hermes_read_regn(hw, RESP2); - } - - hermes_write_regn(hw, EVACK, HERMES_EV_CMD); - - if (status & HERMES_STATUS_RESULT) - err = -EIO; - - out: - return err; -} -EXPORT_SYMBOL(hermes_docmd_wait); - -int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) -{ - int err = 0; - int k; - u16 reg; - - if ( (size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX) ) - return -EINVAL; - - err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL); - if (err) { - return err; - } - - reg = hermes_read_regn(hw, EVSTAT); - k = ALLOC_COMPL_TIMEOUT; - while ( (! (reg & HERMES_EV_ALLOC)) && k) { - k--; - udelay(10); - reg = hermes_read_regn(hw, EVSTAT); - } - - if (! hermes_present(hw)) { - printk(KERN_WARNING "hermes @ %p: " - "Card removed waiting for frame allocation.\n", - hw->iobase); - return -ENODEV; - } - - if (! (reg & HERMES_EV_ALLOC)) { - printk(KERN_ERR "hermes @ %p: " - "Timeout waiting for frame allocation\n", - hw->iobase); - return -ETIMEDOUT; - } - - *fid = hermes_read_regn(hw, ALLOCFID); - hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC); - - return 0; -} -EXPORT_SYMBOL(hermes_allocate); - -/* Set up a BAP to read a particular chunk of data from card's internal buffer. - * - * Returns: < 0 on internal failure (errno), 0 on success, >0 on error - * from firmware - * - * Callable from any context */ -static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) -{ - int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0; - int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0; - int k; - u16 reg; - - /* Paranoia.. */ - if ( (offset > HERMES_BAP_OFFSET_MAX) || (offset % 2) ) - return -EINVAL; - - k = HERMES_BAP_BUSY_TIMEOUT; - reg = hermes_read_reg(hw, oreg); - while ((reg & HERMES_OFFSET_BUSY) && k) { - k--; - udelay(1); - reg = hermes_read_reg(hw, oreg); - } - - if (reg & HERMES_OFFSET_BUSY) - return -ETIMEDOUT; - - /* Now we actually set up the transfer */ - hermes_write_reg(hw, sreg, id); - hermes_write_reg(hw, oreg, offset); - - /* Wait for the BAP to be ready */ - k = HERMES_BAP_BUSY_TIMEOUT; - reg = hermes_read_reg(hw, oreg); - while ( (reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) { - k--; - udelay(1); - reg = hermes_read_reg(hw, oreg); - } - - if (reg != offset) { - printk(KERN_ERR "hermes @ %p: BAP%d offset %s: " - "reg=0x%x id=0x%x offset=0x%x\n", hw->iobase, bap, - (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error", - reg, id, offset); - - if (reg & HERMES_OFFSET_BUSY) { - return -ETIMEDOUT; - } - - return -EIO; /* error or wrong offset */ - } - - return 0; -} - -/* Read a block of data from the chip's buffer, via the - * BAP. Synchronization/serialization is the caller's problem. len - * must be even. - * - * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware - */ -int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, - u16 id, u16 offset) -{ - int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; - int err = 0; - - if ( (len < 0) || (len % 2) ) - return -EINVAL; - - err = hermes_bap_seek(hw, bap, id, offset); - if (err) - goto out; - - /* Actually do the transfer */ - hermes_read_words(hw, dreg, buf, len/2); - - out: - return err; -} -EXPORT_SYMBOL(hermes_bap_pread); - -/* Write a block of data to the chip's buffer, via the - * BAP. Synchronization/serialization is the caller's problem. - * - * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware - */ -int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, - u16 id, u16 offset) -{ - int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; - int err = 0; - - if (len < 0) - return -EINVAL; - - err = hermes_bap_seek(hw, bap, id, offset); - if (err) - goto out; - - /* Actually do the transfer */ - hermes_write_bytes(hw, dreg, buf, len); - - out: - return err; -} -EXPORT_SYMBOL(hermes_bap_pwrite); - -/* Read a Length-Type-Value record from the card. - * - * If length is NULL, we ignore the length read from the card, and - * read the entire buffer regardless. This is useful because some of - * the configuration records appear to have incorrect lengths in - * practice. - * - * Callable from user or bh context. */ -int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, - u16 *length, void *buf) -{ - int err = 0; - int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; - u16 rlength, rtype; - unsigned nwords; - - if ( (bufsize < 0) || (bufsize % 2) ) - return -EINVAL; - - err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL); - if (err) - return err; - - err = hermes_bap_seek(hw, bap, rid, 0); - if (err) - return err; - - rlength = hermes_read_reg(hw, dreg); - - if (! rlength) - return -ENODATA; - - rtype = hermes_read_reg(hw, dreg); - - if (length) - *length = rlength; - - if (rtype != rid) - printk(KERN_WARNING "hermes @ %p: %s(): " - "rid (0x%04x) does not match type (0x%04x)\n", - hw->iobase, __func__, rid, rtype); - if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize) - printk(KERN_WARNING "hermes @ %p: " - "Truncating LTV record from %d to %d bytes. " - "(rid=0x%04x, len=0x%04x)\n", hw->iobase, - HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength); - - nwords = min((unsigned)rlength - 1, bufsize / 2); - hermes_read_words(hw, dreg, buf, nwords); - - return 0; -} -EXPORT_SYMBOL(hermes_read_ltv); - -int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, - u16 length, const void *value) -{ - int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; - int err = 0; - unsigned count; - - if (length == 0) - return -EINVAL; - - err = hermes_bap_seek(hw, bap, rid, 0); - if (err) - return err; - - hermes_write_reg(hw, dreg, length); - hermes_write_reg(hw, dreg, rid); - - count = length - 1; - - hermes_write_bytes(hw, dreg, value, count << 1); - - err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE, - rid, NULL); - - return err; -} -EXPORT_SYMBOL(hermes_write_ltv); - -static int __init init_hermes(void) -{ - return 0; -} - -static void __exit exit_hermes(void) -{ -} - -module_init(init_hermes); -module_exit(exit_hermes); diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h deleted file mode 100644 index 8b13c8fef3dc..000000000000 --- a/drivers/net/wireless/hermes.h +++ /dev/null @@ -1,494 +0,0 @@ -/* hermes.h - * - * Driver core for the "Hermes" wireless MAC controller, as used in - * the Lucent Orinoco and Cabletron RoamAbout cards. It should also - * work on the hfa3841 and hfa3842 MAC controller chips used in the - * Prism I & II chipsets. - * - * This is not a complete driver, just low-level access routines for - * the MAC controller itself. - * - * Based on the prism2 driver from Absolute Value Systems' linux-wlan - * project, the Linux wvlan_cs driver, Lucent's HCF-Light - * (wvlan_hcf.c) library, and the NetBSD wireless driver. - * - * Copyright (C) 2000, David Gibson, Linuxcare Australia. - * (C) Copyright David Gibson, IBM Corp. 2001-2003. - * - * Portions taken from hfa384x.h, Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. - * - * This file distributed under the GPL, version 2. - */ - -#ifndef _HERMES_H -#define _HERMES_H - -/* Notes on locking: - * - * As a module of low level hardware access routines, there is no - * locking. Users of this module should ensure that they serialize - * access to the hermes_t structure, and to the hardware -*/ - -#include -#include - -/* - * Limits and constants - */ -#define HERMES_ALLOC_LEN_MIN (4) -#define HERMES_ALLOC_LEN_MAX (2400) -#define HERMES_LTV_LEN_MAX (34) -#define HERMES_BAP_DATALEN_MAX (4096) -#define HERMES_BAP_OFFSET_MAX (4096) -#define HERMES_PORTID_MAX (7) -#define HERMES_NUMPORTS_MAX (HERMES_PORTID_MAX+1) -#define HERMES_PDR_LEN_MAX (260) /* in bytes, from EK */ -#define HERMES_PDA_RECS_MAX (200) /* a guess */ -#define HERMES_PDA_LEN_MAX (1024) /* in bytes, from EK */ -#define HERMES_SCANRESULT_MAX (35) -#define HERMES_CHINFORESULT_MAX (8) -#define HERMES_MAX_MULTICAST (16) -#define HERMES_MAGIC (0x7d1f) - -/* - * Hermes register offsets - */ -#define HERMES_CMD (0x00) -#define HERMES_PARAM0 (0x02) -#define HERMES_PARAM1 (0x04) -#define HERMES_PARAM2 (0x06) -#define HERMES_STATUS (0x08) -#define HERMES_RESP0 (0x0A) -#define HERMES_RESP1 (0x0C) -#define HERMES_RESP2 (0x0E) -#define HERMES_INFOFID (0x10) -#define HERMES_RXFID (0x20) -#define HERMES_ALLOCFID (0x22) -#define HERMES_TXCOMPLFID (0x24) -#define HERMES_SELECT0 (0x18) -#define HERMES_OFFSET0 (0x1C) -#define HERMES_DATA0 (0x36) -#define HERMES_SELECT1 (0x1A) -#define HERMES_OFFSET1 (0x1E) -#define HERMES_DATA1 (0x38) -#define HERMES_EVSTAT (0x30) -#define HERMES_INTEN (0x32) -#define HERMES_EVACK (0x34) -#define HERMES_CONTROL (0x14) -#define HERMES_SWSUPPORT0 (0x28) -#define HERMES_SWSUPPORT1 (0x2A) -#define HERMES_SWSUPPORT2 (0x2C) -#define HERMES_AUXPAGE (0x3A) -#define HERMES_AUXOFFSET (0x3C) -#define HERMES_AUXDATA (0x3E) - -/* - * CMD register bitmasks - */ -#define HERMES_CMD_BUSY (0x8000) -#define HERMES_CMD_AINFO (0x7f00) -#define HERMES_CMD_MACPORT (0x0700) -#define HERMES_CMD_RECL (0x0100) -#define HERMES_CMD_WRITE (0x0100) -#define HERMES_CMD_PROGMODE (0x0300) -#define HERMES_CMD_CMDCODE (0x003f) - -/* - * STATUS register bitmasks - */ -#define HERMES_STATUS_RESULT (0x7f00) -#define HERMES_STATUS_CMDCODE (0x003f) - -/* - * OFFSET register bitmasks - */ -#define HERMES_OFFSET_BUSY (0x8000) -#define HERMES_OFFSET_ERR (0x4000) -#define HERMES_OFFSET_DATAOFF (0x0ffe) - -/* - * Event register bitmasks (INTEN, EVSTAT, EVACK) - */ -#define HERMES_EV_TICK (0x8000) -#define HERMES_EV_WTERR (0x4000) -#define HERMES_EV_INFDROP (0x2000) -#define HERMES_EV_INFO (0x0080) -#define HERMES_EV_DTIM (0x0020) -#define HERMES_EV_CMD (0x0010) -#define HERMES_EV_ALLOC (0x0008) -#define HERMES_EV_TXEXC (0x0004) -#define HERMES_EV_TX (0x0002) -#define HERMES_EV_RX (0x0001) - -/* - * Command codes - */ -/*--- Controller Commands ----------------------------*/ -#define HERMES_CMD_INIT (0x0000) -#define HERMES_CMD_ENABLE (0x0001) -#define HERMES_CMD_DISABLE (0x0002) -#define HERMES_CMD_DIAG (0x0003) - -/*--- Buffer Mgmt Commands ---------------------------*/ -#define HERMES_CMD_ALLOC (0x000A) -#define HERMES_CMD_TX (0x000B) - -/*--- Regulate Commands ------------------------------*/ -#define HERMES_CMD_NOTIFY (0x0010) -#define HERMES_CMD_INQUIRE (0x0011) - -/*--- Configure Commands -----------------------------*/ -#define HERMES_CMD_ACCESS (0x0021) -#define HERMES_CMD_DOWNLD (0x0022) - -/*--- Serial I/O Commands ----------------------------*/ -#define HERMES_CMD_READMIF (0x0030) -#define HERMES_CMD_WRITEMIF (0x0031) - -/*--- Debugging Commands -----------------------------*/ -#define HERMES_CMD_TEST (0x0038) - - -/* Test command arguments */ -#define HERMES_TEST_SET_CHANNEL 0x0800 -#define HERMES_TEST_MONITOR 0x0b00 -#define HERMES_TEST_STOP 0x0f00 - -/* Authentication algorithms */ -#define HERMES_AUTH_OPEN 1 -#define HERMES_AUTH_SHARED_KEY 2 - -/* WEP settings */ -#define HERMES_WEP_PRIVACY_INVOKED 0x0001 -#define HERMES_WEP_EXCL_UNENCRYPTED 0x0002 -#define HERMES_WEP_HOST_ENCRYPT 0x0010 -#define HERMES_WEP_HOST_DECRYPT 0x0080 - -/* Symbol hostscan options */ -#define HERMES_HOSTSCAN_SYMBOL_5SEC 0x0001 -#define HERMES_HOSTSCAN_SYMBOL_ONCE 0x0002 -#define HERMES_HOSTSCAN_SYMBOL_PASSIVE 0x0040 -#define HERMES_HOSTSCAN_SYMBOL_BCAST 0x0080 - -/* - * Frame structures and constants - */ - -#define HERMES_DESCRIPTOR_OFFSET 0 -#define HERMES_802_11_OFFSET (14) -#define HERMES_802_3_OFFSET (14+32) -#define HERMES_802_2_OFFSET (14+32+14) -#define HERMES_TXCNTL2_OFFSET (HERMES_802_3_OFFSET - 2) - -#define HERMES_RXSTAT_ERR (0x0003) -#define HERMES_RXSTAT_BADCRC (0x0001) -#define HERMES_RXSTAT_UNDECRYPTABLE (0x0002) -#define HERMES_RXSTAT_MIC (0x0010) /* Frame contains MIC */ -#define HERMES_RXSTAT_MACPORT (0x0700) -#define HERMES_RXSTAT_PCF (0x1000) /* Frame was received in CF period */ -#define HERMES_RXSTAT_MIC_KEY_ID (0x1800) /* MIC key used */ -#define HERMES_RXSTAT_MSGTYPE (0xE000) -#define HERMES_RXSTAT_1042 (0x2000) /* RFC-1042 frame */ -#define HERMES_RXSTAT_TUNNEL (0x4000) /* bridge-tunnel encoded frame */ -#define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */ - -/* Shift amount for key ID in RXSTAT and TXCTRL */ -#define HERMES_MIC_KEY_ID_SHIFT 11 - -struct hermes_tx_descriptor { - __le16 status; - __le16 reserved1; - __le16 reserved2; - __le32 sw_support; - u8 retry_count; - u8 tx_rate; - __le16 tx_control; -} __attribute__ ((packed)); - -#define HERMES_TXSTAT_RETRYERR (0x0001) -#define HERMES_TXSTAT_AGEDERR (0x0002) -#define HERMES_TXSTAT_DISCON (0x0004) -#define HERMES_TXSTAT_FORMERR (0x0008) - -#define HERMES_TXCTRL_TX_OK (0x0002) /* ?? interrupt on Tx complete */ -#define HERMES_TXCTRL_TX_EX (0x0004) /* ?? interrupt on Tx exception */ -#define HERMES_TXCTRL_802_11 (0x0008) /* We supply 802.11 header */ -#define HERMES_TXCTRL_MIC (0x0010) /* 802.3 + TKIP */ -#define HERMES_TXCTRL_MIC_KEY_ID (0x1800) /* MIC Key ID mask */ -#define HERMES_TXCTRL_ALT_RTRY (0x0020) - -/* Inquiry constants and data types */ - -#define HERMES_INQ_TALLIES (0xF100) -#define HERMES_INQ_SCAN (0xF101) -#define HERMES_INQ_CHANNELINFO (0xF102) -#define HERMES_INQ_HOSTSCAN (0xF103) -#define HERMES_INQ_HOSTSCAN_SYMBOL (0xF104) -#define HERMES_INQ_LINKSTATUS (0xF200) -#define HERMES_INQ_SEC_STAT_AGERE (0xF202) - -struct hermes_tallies_frame { - __le16 TxUnicastFrames; - __le16 TxMulticastFrames; - __le16 TxFragments; - __le16 TxUnicastOctets; - __le16 TxMulticastOctets; - __le16 TxDeferredTransmissions; - __le16 TxSingleRetryFrames; - __le16 TxMultipleRetryFrames; - __le16 TxRetryLimitExceeded; - __le16 TxDiscards; - __le16 RxUnicastFrames; - __le16 RxMulticastFrames; - __le16 RxFragments; - __le16 RxUnicastOctets; - __le16 RxMulticastOctets; - __le16 RxFCSErrors; - __le16 RxDiscards_NoBuffer; - __le16 TxDiscardsWrongSA; - __le16 RxWEPUndecryptable; - __le16 RxMsgInMsgFragments; - __le16 RxMsgInBadMsgFragments; - /* Those last are probably not available in very old firmwares */ - __le16 RxDiscards_WEPICVError; - __le16 RxDiscards_WEPExcluded; -} __attribute__ ((packed)); - -/* Grabbed from wlan-ng - Thanks Mark... - Jean II - * This is the result of a scan inquiry command */ -/* Structure describing info about an Access Point */ -struct prism2_scan_apinfo { - __le16 channel; /* Channel where the AP sits */ - __le16 noise; /* Noise level */ - __le16 level; /* Signal level */ - u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ - __le16 beacon_interv; /* Beacon interval */ - __le16 capabilities; /* Capabilities */ - __le16 essid_len; /* ESSID length */ - u8 essid[32]; /* ESSID of the network */ - u8 rates[10]; /* Bit rate supported */ - __le16 proberesp_rate; /* Data rate of the response frame */ - __le16 atim; /* ATIM window time, Kus (hostscan only) */ -} __attribute__ ((packed)); - -/* Same stuff for the Lucent/Agere card. - * Thanks to h1kari - Jean II */ -struct agere_scan_apinfo { - __le16 channel; /* Channel where the AP sits */ - __le16 noise; /* Noise level */ - __le16 level; /* Signal level */ - u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ - __le16 beacon_interv; /* Beacon interval */ - __le16 capabilities; /* Capabilities */ - /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ - __le16 essid_len; /* ESSID length */ - u8 essid[32]; /* ESSID of the network */ -} __attribute__ ((packed)); - -/* Moustafa: Scan structure for Symbol cards */ -struct symbol_scan_apinfo { - u8 channel; /* Channel where the AP sits */ - u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */ - __le16 noise; /* Noise level */ - __le16 level; /* Signal level */ - u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ - __le16 beacon_interv; /* Beacon interval */ - __le16 capabilities; /* Capabilities */ - /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ - __le16 essid_len; /* ESSID length */ - u8 essid[32]; /* ESSID of the network */ - __le16 rates[5]; /* Bit rate supported */ - __le16 basic_rates; /* Basic rates bitmask */ - u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */ - u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */ -} __attribute__ ((packed)); - -union hermes_scan_info { - struct agere_scan_apinfo a; - struct prism2_scan_apinfo p; - struct symbol_scan_apinfo s; -}; - -/* Extended scan struct for HERMES_INQ_CHANNELINFO. - * wl_lkm calls this an ACS scan (Automatic Channel Select). - * Keep out of union hermes_scan_info because it is much bigger than - * the older scan structures. */ -struct agere_ext_scan_info { - __le16 reserved0; - - u8 noise; - u8 level; - u8 rx_flow; - u8 rate; - __le16 reserved1[2]; - - __le16 frame_control; - __le16 dur_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 bssid[ETH_ALEN]; - __le16 sequence; - u8 addr4[ETH_ALEN]; - - __le16 data_length; - - /* Next 3 fields do not get filled in. */ - u8 daddr[ETH_ALEN]; - u8 saddr[ETH_ALEN]; - __le16 len_type; - - __le64 timestamp; - __le16 beacon_interval; - __le16 capabilities; - u8 data[316]; -} __attribute__ ((packed)); - -#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000) -#define HERMES_LINKSTATUS_CONNECTED (0x0001) -#define HERMES_LINKSTATUS_DISCONNECTED (0x0002) -#define HERMES_LINKSTATUS_AP_CHANGE (0x0003) -#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004) -#define HERMES_LINKSTATUS_AP_IN_RANGE (0x0005) -#define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006) - -struct hermes_linkstatus { - __le16 linkstatus; /* Link status */ -} __attribute__ ((packed)); - -struct hermes_response { - u16 status, resp0, resp1, resp2; -}; - -/* "ID" structure - used for ESSID and station nickname */ -struct hermes_idstring { - __le16 len; - __le16 val[16]; -} __attribute__ ((packed)); - -struct hermes_multicast { - u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN]; -} __attribute__ ((packed)); - -/* Timeouts */ -#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */ - -/* Basic control structure */ -typedef struct hermes { - void __iomem *iobase; - int reg_spacing; -#define HERMES_16BIT_REGSPACING 0 -#define HERMES_32BIT_REGSPACING 1 - u16 inten; /* Which interrupts should be enabled? */ -} hermes_t; - -/* Register access convenience macros */ -#define hermes_read_reg(hw, off) \ - (ioread16((hw)->iobase + ( (off) << (hw)->reg_spacing ))) -#define hermes_write_reg(hw, off, val) \ - (iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing))) -#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name) -#define hermes_write_regn(hw, name, val) hermes_write_reg((hw), HERMES_##name, (val)) - -/* Function prototypes */ -void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing); -int hermes_init(hermes_t *hw); -int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, - struct hermes_response *resp); -int hermes_doicmd_wait(hermes_t *hw, u16 cmd, - u16 parm0, u16 parm1, u16 parm2, - struct hermes_response *resp); -int hermes_allocate(hermes_t *hw, u16 size, u16 *fid); - -int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, - u16 id, u16 offset); -int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, - u16 id, u16 offset); -int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen, - u16 *length, void *buf); -int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, - u16 length, const void *value); - -/* Inline functions */ - -static inline int hermes_present(hermes_t *hw) -{ - return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC; -} - -static inline void hermes_set_irqmask(hermes_t *hw, u16 events) -{ - hw->inten = events; - hermes_write_regn(hw, INTEN, events); -} - -static inline int hermes_enable_port(hermes_t *hw, int port) -{ - return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8), - 0, NULL); -} - -static inline int hermes_disable_port(hermes_t *hw, int port) -{ - return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), - 0, NULL); -} - -/* Initiate an INQUIRE command (tallies or scan). The result will come as an - * information frame in __orinoco_ev_info() */ -static inline int hermes_inquire(hermes_t *hw, u16 rid) -{ - return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL); -} - -#define HERMES_BYTES_TO_RECLEN(n) ( (((n)+1)/2) + 1 ) -#define HERMES_RECLEN_TO_BYTES(n) ( ((n)-1) * 2 ) - -/* Note that for the next two, the count is in 16-bit words, not bytes */ -static inline void hermes_read_words(struct hermes *hw, int off, void *buf, unsigned count) -{ - off = off << hw->reg_spacing; - ioread16_rep(hw->iobase + off, buf, count); -} - -static inline void hermes_write_bytes(struct hermes *hw, int off, - const char *buf, unsigned count) -{ - off = off << hw->reg_spacing; - iowrite16_rep(hw->iobase + off, buf, count >> 1); - if (unlikely(count & 1)) - iowrite8(buf[count - 1], hw->iobase + off); -} - -static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count) -{ - unsigned i; - - off = off << hw->reg_spacing; - - for (i = 0; i < count; i++) - iowrite16(0, hw->iobase + off); -} - -#define HERMES_READ_RECORD(hw, bap, rid, buf) \ - (hermes_read_ltv((hw),(bap),(rid), sizeof(*buf), NULL, (buf))) -#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \ - (hermes_write_ltv((hw),(bap),(rid),HERMES_BYTES_TO_RECLEN(sizeof(*buf)),(buf))) - -static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word) -{ - __le16 rec; - int err; - - err = HERMES_READ_RECORD(hw, bap, rid, &rec); - *word = le16_to_cpu(rec); - return err; -} - -static inline int hermes_write_wordrec(hermes_t *hw, int bap, u16 rid, u16 word) -{ - __le16 rec = cpu_to_le16(word); - return HERMES_WRITE_RECORD(hw, bap, rid, &rec); -} - -#endif /* _HERMES_H */ diff --git a/drivers/net/wireless/hermes_dld.c b/drivers/net/wireless/hermes_dld.c deleted file mode 100644 index d8c626e61a3a..000000000000 --- a/drivers/net/wireless/hermes_dld.c +++ /dev/null @@ -1,730 +0,0 @@ -/* - * Hermes download helper driver. - * - * This could be entirely merged into hermes.c. - * - * I'm keeping it separate to minimise the amount of merging between - * kernel upgrades. It also means the memory overhead for drivers that - * don't need firmware download low. - * - * This driver: - * - is capable of writing to the volatile area of the hermes device - * - is currently not capable of writing to non-volatile areas - * - provide helpers to identify and update plugin data - * - is not capable of interpreting a fw image directly. That is up to - * the main card driver. - * - deals with Hermes I devices. It can probably be modified to deal - * with Hermes II devices - * - * Copyright (C) 2007, David Kilroy - * - * Plug data code slightly modified from spectrum_cs driver - * Copyright (C) 2002-2005 Pavel Roskin - * Portions based on information in wl_lkm_718 Agere driver - * COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#include -#include -#include "hermes.h" -#include "hermes_dld.h" - -MODULE_DESCRIPTION("Download helper for Lucent Hermes chipset"); -MODULE_AUTHOR("David Kilroy "); -MODULE_LICENSE("Dual MPL/GPL"); - -#define PFX "hermes_dld: " - -/* - * AUX port access. To unlock the AUX port write the access keys to the - * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL - * register. Then read it and make sure it's HERMES_AUX_ENABLED. - */ -#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ -#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ -#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ -#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */ - -#define HERMES_AUX_PW0 0xFE01 -#define HERMES_AUX_PW1 0xDC23 -#define HERMES_AUX_PW2 0xBA45 - -/* HERMES_CMD_DOWNLD */ -#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD) -#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD) -#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD) -#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD) - -/* End markers used in dblocks */ -#define PDI_END 0x00000000 /* End of PDA */ -#define BLOCK_END 0xFFFFFFFF /* Last image block */ -#define TEXT_END 0x1A /* End of text header */ - -/* - * PDA == Production Data Area - * - * In principle, the max. size of the PDA is is 4096 words. Currently, - * however, only about 500 bytes of this area are used. - * - * Some USB implementations can't handle sizes in excess of 1016. Note - * that PDA is not actually used in those USB environments, but may be - * retrieved by common code. - */ -#define MAX_PDA_SIZE 1000 - -/* Limit the amout we try to download in a single shot. - * Size is in bytes. - */ -#define MAX_DL_SIZE 1024 -#define LIMIT_PROGRAM_SIZE 0 - -/* - * The following structures have little-endian fields denoted by - * the leading underscore. Don't access them directly - use inline - * functions defined below. - */ - -/* - * The binary image to be downloaded consists of series of data blocks. - * Each block has the following structure. - */ -struct dblock { - __le32 addr; /* adapter address where to write the block */ - __le16 len; /* length of the data only, in bytes */ - char data[0]; /* data to be written */ -} __attribute__ ((packed)); - -/* - * Plug Data References are located in in the image after the last data - * block. They refer to areas in the adapter memory where the plug data - * items with matching ID should be written. - */ -struct pdr { - __le32 id; /* record ID */ - __le32 addr; /* adapter address where to write the data */ - __le32 len; /* expected length of the data, in bytes */ - char next[0]; /* next PDR starts here */ -} __attribute__ ((packed)); - -/* - * Plug Data Items are located in the EEPROM read from the adapter by - * primary firmware. They refer to the device-specific data that should - * be plugged into the secondary firmware. - */ -struct pdi { - __le16 len; /* length of ID and data, in words */ - __le16 id; /* record ID */ - char data[0]; /* plug data */ -} __attribute__ ((packed)); - -/*** FW data block access functions ***/ - -static inline u32 -dblock_addr(const struct dblock *blk) -{ - return le32_to_cpu(blk->addr); -} - -static inline u32 -dblock_len(const struct dblock *blk) -{ - return le16_to_cpu(blk->len); -} - -/*** PDR Access functions ***/ - -static inline u32 -pdr_id(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->id); -} - -static inline u32 -pdr_addr(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->addr); -} - -static inline u32 -pdr_len(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->len); -} - -/*** PDI Access functions ***/ - -static inline u32 -pdi_id(const struct pdi *pdi) -{ - return le16_to_cpu(pdi->id); -} - -/* Return length of the data only, in bytes */ -static inline u32 -pdi_len(const struct pdi *pdi) -{ - return 2 * (le16_to_cpu(pdi->len) - 1); -} - -/*** Hermes AUX control ***/ - -static inline void -hermes_aux_setaddr(hermes_t *hw, u32 addr) -{ - hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); - hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); -} - -static inline int -hermes_aux_control(hermes_t *hw, int enabled) -{ - int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED; - int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE; - int i; - - /* Already open? */ - if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state) - return 0; - - hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); - hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); - hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); - hermes_write_reg(hw, HERMES_CONTROL, action); - - for (i = 0; i < 20; i++) { - udelay(10); - if (hermes_read_reg(hw, HERMES_CONTROL) == - desired_state) - return 0; - } - - return -EBUSY; -} - -/*** Plug Data Functions ***/ - -/* - * Scan PDR for the record with the specified RECORD_ID. - * If it's not found, return NULL. - */ -static struct pdr * -hermes_find_pdr(struct pdr *first_pdr, u32 record_id) -{ - struct pdr *pdr = first_pdr; - void *end = (void *)first_pdr + MAX_PDA_SIZE; - - while (((void *)pdr < end) && - (pdr_id(pdr) != PDI_END)) { - /* - * PDR area is currently not terminated by PDI_END. - * It's followed by CRC records, which have the type - * field where PDR has length. The type can be 0 or 1. - */ - if (pdr_len(pdr) < 2) - return NULL; - - /* If the record ID matches, we are done */ - if (pdr_id(pdr) == record_id) - return pdr; - - pdr = (struct pdr *) pdr->next; - } - return NULL; -} - -/* Scan production data items for a particular entry */ -static struct pdi * -hermes_find_pdi(struct pdi *first_pdi, u32 record_id) -{ - struct pdi *pdi = first_pdi; - - while (pdi_id(pdi) != PDI_END) { - - /* If the record ID matches, we are done */ - if (pdi_id(pdi) == record_id) - return pdi; - - pdi = (struct pdi *) &pdi->data[pdi_len(pdi)]; - } - return NULL; -} - -/* Process one Plug Data Item - find corresponding PDR and plug it */ -static int -hermes_plug_pdi(hermes_t *hw, struct pdr *first_pdr, const struct pdi *pdi) -{ - struct pdr *pdr; - - /* Find the PDR corresponding to this PDI */ - pdr = hermes_find_pdr(first_pdr, pdi_id(pdi)); - - /* No match is found, safe to ignore */ - if (!pdr) - return 0; - - /* Lengths of the data in PDI and PDR must match */ - if (pdi_len(pdi) != pdr_len(pdr)) - return -EINVAL; - - /* do the actual plugging */ - hermes_aux_setaddr(hw, pdr_addr(pdr)); - hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi)); - - return 0; -} - -/* Read PDA from the adapter */ -int hermes_read_pda(hermes_t *hw, - __le16 *pda, - u32 pda_addr, - u16 pda_len, - int use_eeprom) /* can we get this into hw? */ -{ - int ret; - u16 pda_size; - u16 data_len = pda_len; - __le16 *data = pda; - - if (use_eeprom) { - /* PDA of spectrum symbol is in eeprom */ - - /* Issue command to read EEPROM */ - ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); - if (ret) - return ret; - } else { - /* wl_lkm does not include PDA size in the PDA area. - * We will pad the information into pda, so other routines - * don't have to be modified */ - pda[0] = cpu_to_le16(pda_len - 2); - /* Includes CFG_PROD_DATA but not itself */ - pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ - data_len = pda_len - 4; - data = pda + 2; - } - - /* Open auxiliary port */ - ret = hermes_aux_control(hw, 1); - printk(KERN_DEBUG PFX "AUX enable returned %d\n", ret); - if (ret) - return ret; - - /* read PDA from EEPROM */ - hermes_aux_setaddr(hw, pda_addr); - hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2); - - /* Close aux port */ - ret = hermes_aux_control(hw, 0); - printk(KERN_DEBUG PFX "AUX disable returned %d\n", ret); - - /* Check PDA length */ - pda_size = le16_to_cpu(pda[0]); - printk(KERN_DEBUG PFX "Actual PDA length %d, Max allowed %d\n", - pda_size, pda_len); - if (pda_size > pda_len) - return -EINVAL; - - return 0; -} -EXPORT_SYMBOL(hermes_read_pda); - -/* Parse PDA and write the records into the adapter - * - * Attempt to write every records that is in the specified pda - * which also has a valid production data record for the firmware. - */ -int hermes_apply_pda(hermes_t *hw, - const char *first_pdr, - const __le16 *pda) -{ - int ret; - const struct pdi *pdi; - struct pdr *pdr; - - pdr = (struct pdr *) first_pdr; - - /* Go through every PDI and plug them into the adapter */ - pdi = (const struct pdi *) (pda + 2); - while (pdi_id(pdi) != PDI_END) { - ret = hermes_plug_pdi(hw, pdr, pdi); - if (ret) - return ret; - - /* Increment to the next PDI */ - pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)]; - } - return 0; -} -EXPORT_SYMBOL(hermes_apply_pda); - -/* Identify the total number of bytes in all blocks - * including the header data. - */ -size_t -hermes_blocks_length(const char *first_block) -{ - const struct dblock *blk = (const struct dblock *) first_block; - int total_len = 0; - int len; - - /* Skip all blocks to locate Plug Data References - * (Spectrum CS) */ - while (dblock_addr(blk) != BLOCK_END) { - len = dblock_len(blk); - total_len += sizeof(*blk) + len; - blk = (struct dblock *) &blk->data[len]; - } - - return total_len; -} -EXPORT_SYMBOL(hermes_blocks_length); - -/*** Hermes programming ***/ - -/* About to start programming data (Hermes I) - * offset is the entry point - * - * Spectrum_cs' Symbol fw does not require this - * wl_lkm Agere fw does - * Don't know about intersil - */ -int hermesi_program_init(hermes_t *hw, u32 offset) -{ - int err; - - /* Disable interrupts?*/ - /*hw->inten = 0x0;*/ - /*hermes_write_regn(hw, INTEN, 0);*/ - /*hermes_set_irqmask(hw, 0);*/ - - /* Acknowledge any outstanding command */ - hermes_write_regn(hw, EVACK, 0xFFFF); - - /* Using doicmd_wait rather than docmd_wait */ - err = hermes_doicmd_wait(hw, - 0x0100 | HERMES_CMD_INIT, - 0, 0, 0, NULL); - if (err) - return err; - - err = hermes_doicmd_wait(hw, - 0x0000 | HERMES_CMD_INIT, - 0, 0, 0, NULL); - if (err) - return err; - - err = hermes_aux_control(hw, 1); - printk(KERN_DEBUG PFX "AUX enable returned %d\n", err); - - if (err) - return err; - - printk(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset); - err = hermes_doicmd_wait(hw, - HERMES_PROGRAM_ENABLE_VOLATILE, - offset & 0xFFFFu, - offset >> 16, - 0, - NULL); - printk(KERN_DEBUG PFX "PROGRAM_ENABLE returned %d\n", - err); - - return err; -} -EXPORT_SYMBOL(hermesi_program_init); - -/* Done programming data (Hermes I) - * - * Spectrum_cs' Symbol fw does not require this - * wl_lkm Agere fw does - * Don't know about intersil - */ -int hermesi_program_end(hermes_t *hw) -{ - struct hermes_response resp; - int rc = 0; - int err; - - rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp); - - printk(KERN_DEBUG PFX "PROGRAM_DISABLE returned %d, " - "r0 0x%04x, r1 0x%04x, r2 0x%04x\n", - rc, resp.resp0, resp.resp1, resp.resp2); - - if ((rc == 0) && - ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD)) - rc = -EIO; - - err = hermes_aux_control(hw, 0); - printk(KERN_DEBUG PFX "AUX disable returned %d\n", err); - - /* Acknowledge any outstanding command */ - hermes_write_regn(hw, EVACK, 0xFFFF); - - /* Reinitialise, ignoring return */ - (void) hermes_doicmd_wait(hw, 0x0000 | HERMES_CMD_INIT, - 0, 0, 0, NULL); - - return rc ? rc : err; -} -EXPORT_SYMBOL(hermesi_program_end); - -/* Program the data blocks */ -int hermes_program(hermes_t *hw, const char *first_block, const char *end) -{ - const struct dblock *blk; - u32 blkaddr; - u32 blklen; -#if LIMIT_PROGRAM_SIZE - u32 addr; - u32 len; -#endif - - blk = (const struct dblock *) first_block; - - if ((const char *) blk > (end - sizeof(*blk))) - return -EIO; - - blkaddr = dblock_addr(blk); - blklen = dblock_len(blk); - - while ((blkaddr != BLOCK_END) && - (((const char *) blk + blklen) <= end)) { - printk(KERN_DEBUG PFX - "Programming block of length %d to address 0x%08x\n", - blklen, blkaddr); - -#if !LIMIT_PROGRAM_SIZE - /* wl_lkm driver splits this into writes of 2000 bytes */ - hermes_aux_setaddr(hw, blkaddr); - hermes_write_bytes(hw, HERMES_AUXDATA, blk->data, - blklen); -#else - len = (blklen < MAX_DL_SIZE) ? blklen : MAX_DL_SIZE; - addr = blkaddr; - - while (addr < (blkaddr + blklen)) { - printk(KERN_DEBUG PFX - "Programming subblock of length %d " - "to address 0x%08x. Data @ %p\n", - len, addr, &blk->data[addr - blkaddr]); - - hermes_aux_setaddr(hw, addr); - hermes_write_bytes(hw, HERMES_AUXDATA, - &blk->data[addr - blkaddr], - len); - - addr += len; - len = ((blkaddr + blklen - addr) < MAX_DL_SIZE) ? - (blkaddr + blklen - addr) : MAX_DL_SIZE; - } -#endif - blk = (const struct dblock *) &blk->data[blklen]; - - if ((const char *) blk > (end - sizeof(*blk))) - return -EIO; - - blkaddr = dblock_addr(blk); - blklen = dblock_len(blk); - } - return 0; -} -EXPORT_SYMBOL(hermes_program); - -static int __init init_hermes_dld(void) -{ - return 0; -} - -static void __exit exit_hermes_dld(void) -{ -} - -module_init(init_hermes_dld); -module_exit(exit_hermes_dld); - -/*** Default plugging data for Hermes I ***/ -/* Values from wl_lkm_718/hcf/dhf.c */ - -#define DEFINE_DEFAULT_PDR(pid, length, data) \ -static const struct { \ - __le16 len; \ - __le16 id; \ - u8 val[length]; \ -} __attribute__ ((packed)) default_pdr_data_##pid = { \ - __constant_cpu_to_le16((sizeof(default_pdr_data_##pid)/ \ - sizeof(__le16)) - 1), \ - __constant_cpu_to_le16(pid), \ - data \ -} - -#define DEFAULT_PDR(pid) default_pdr_data_##pid - -/* HWIF Compatiblity */ -DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00"); - -/* PPPPSign */ -DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00"); - -/* PPPPProf */ -DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00"); - -/* Antenna diversity */ -DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F"); - -/* Modem VCO band Set-up */ -DEFINE_DEFAULT_PDR(0x0160, 28, - "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00"); - -/* Modem Rx Gain Table Values */ -DEFINE_DEFAULT_PDR(0x0161, 256, - "\x3F\x01\x3F\01\x3F\x01\x3F\x01" - "\x3F\x01\x3F\01\x3F\x01\x3F\x01" - "\x3F\x01\x3F\01\x3F\x01\x3F\x01" - "\x3F\x01\x3F\01\x3F\x01\x3F\x01" - "\x3F\x01\x3E\01\x3E\x01\x3D\x01" - "\x3D\x01\x3C\01\x3C\x01\x3B\x01" - "\x3B\x01\x3A\01\x3A\x01\x39\x01" - "\x39\x01\x38\01\x38\x01\x37\x01" - "\x37\x01\x36\01\x36\x01\x35\x01" - "\x35\x01\x34\01\x34\x01\x33\x01" - "\x33\x01\x32\x01\x32\x01\x31\x01" - "\x31\x01\x30\x01\x30\x01\x7B\x01" - "\x7B\x01\x7A\x01\x7A\x01\x79\x01" - "\x79\x01\x78\x01\x78\x01\x77\x01" - "\x77\x01\x76\x01\x76\x01\x75\x01" - "\x75\x01\x74\x01\x74\x01\x73\x01" - "\x73\x01\x72\x01\x72\x01\x71\x01" - "\x71\x01\x70\x01\x70\x01\x68\x01" - "\x68\x01\x67\x01\x67\x01\x66\x01" - "\x66\x01\x65\x01\x65\x01\x57\x01" - "\x57\x01\x56\x01\x56\x01\x55\x01" - "\x55\x01\x54\x01\x54\x01\x53\x01" - "\x53\x01\x52\x01\x52\x01\x51\x01" - "\x51\x01\x50\x01\x50\x01\x48\x01" - "\x48\x01\x47\x01\x47\x01\x46\x01" - "\x46\x01\x45\x01\x45\x01\x44\x01" - "\x44\x01\x43\x01\x43\x01\x42\x01" - "\x42\x01\x41\x01\x41\x01\x40\x01" - "\x40\x01\x40\x01\x40\x01\x40\x01" - "\x40\x01\x40\x01\x40\x01\x40\x01" - "\x40\x01\x40\x01\x40\x01\x40\x01" - "\x40\x01\x40\x01\x40\x01\x40\x01"); - -/* Write PDA according to certain rules. - * - * For every production data record, look for a previous setting in - * the pda, and use that. - * - * For certain records, use defaults if they are not found in pda. - */ -int hermes_apply_pda_with_defaults(hermes_t *hw, - const char *first_pdr, - const __le16 *pda) -{ - const struct pdr *pdr = (const struct pdr *) first_pdr; - struct pdi *first_pdi = (struct pdi *) &pda[2]; - struct pdi *pdi; - struct pdi *default_pdi = NULL; - struct pdi *outdoor_pdi; - void *end = (void *)first_pdr + MAX_PDA_SIZE; - int record_id; - - while (((void *)pdr < end) && - (pdr_id(pdr) != PDI_END)) { - /* - * For spectrum_cs firmwares, - * PDR area is currently not terminated by PDI_END. - * It's followed by CRC records, which have the type - * field where PDR has length. The type can be 0 or 1. - */ - if (pdr_len(pdr) < 2) - break; - record_id = pdr_id(pdr); - - pdi = hermes_find_pdi(first_pdi, record_id); - if (pdi) - printk(KERN_DEBUG PFX "Found record 0x%04x at %p\n", - record_id, pdi); - - switch (record_id) { - case 0x110: /* Modem REFDAC values */ - case 0x120: /* Modem VGDAC values */ - outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1); - default_pdi = NULL; - if (outdoor_pdi) { - pdi = outdoor_pdi; - printk(KERN_DEBUG PFX - "Using outdoor record 0x%04x at %p\n", - record_id + 1, pdi); - } - break; - case 0x5: /* HWIF Compatiblity */ - default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005); - break; - case 0x108: /* PPPPSign */ - default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108); - break; - case 0x109: /* PPPPProf */ - default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109); - break; - case 0x150: /* Antenna diversity */ - default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150); - break; - case 0x160: /* Modem VCO band Set-up */ - default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160); - break; - case 0x161: /* Modem Rx Gain Table Values */ - default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161); - break; - default: - default_pdi = NULL; - break; - } - if (!pdi && default_pdi) { - /* Use default */ - pdi = default_pdi; - printk(KERN_DEBUG PFX - "Using default record 0x%04x at %p\n", - record_id, pdi); - } - - if (pdi) { - /* Lengths of the data in PDI and PDR must match */ - if (pdi_len(pdi) == pdr_len(pdr)) { - /* do the actual plugging */ - hermes_aux_setaddr(hw, pdr_addr(pdr)); - hermes_write_bytes(hw, HERMES_AUXDATA, - pdi->data, pdi_len(pdi)); - } - } - - pdr++; - } - return 0; -} -EXPORT_SYMBOL(hermes_apply_pda_with_defaults); diff --git a/drivers/net/wireless/hermes_dld.h b/drivers/net/wireless/hermes_dld.h deleted file mode 100644 index 6fcb26277999..000000000000 --- a/drivers/net/wireless/hermes_dld.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2007, David Kilroy - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ -#ifndef _HERMES_DLD_H -#define _HERMES_DLD_H - -#include "hermes.h" - -int hermesi_program_init(hermes_t *hw, u32 offset); -int hermesi_program_end(hermes_t *hw); -int hermes_program(hermes_t *hw, const char *first_block, const char *end); - -int hermes_read_pda(hermes_t *hw, - __le16 *pda, - u32 pda_addr, - u16 pda_len, - int use_eeprom); -int hermes_apply_pda(hermes_t *hw, - const char *first_pdr, - const __le16 *pda); -int hermes_apply_pda_with_defaults(hermes_t *hw, - const char *first_pdr, - const __le16 *pda); - -size_t hermes_blocks_length(const char *first_block); - -#endif /* _HERMES_DLD_H */ diff --git a/drivers/net/wireless/hermes_rid.h b/drivers/net/wireless/hermes_rid.h deleted file mode 100644 index 42eb67dea1df..000000000000 --- a/drivers/net/wireless/hermes_rid.h +++ /dev/null @@ -1,165 +0,0 @@ -#ifndef _HERMES_RID_H -#define _HERMES_RID_H - -/* - * Configuration RIDs - */ -#define HERMES_RID_CNFPORTTYPE 0xFC00 -#define HERMES_RID_CNFOWNMACADDR 0xFC01 -#define HERMES_RID_CNFDESIREDSSID 0xFC02 -#define HERMES_RID_CNFOWNCHANNEL 0xFC03 -#define HERMES_RID_CNFOWNSSID 0xFC04 -#define HERMES_RID_CNFOWNATIMWINDOW 0xFC05 -#define HERMES_RID_CNFSYSTEMSCALE 0xFC06 -#define HERMES_RID_CNFMAXDATALEN 0xFC07 -#define HERMES_RID_CNFWDSADDRESS 0xFC08 -#define HERMES_RID_CNFPMENABLED 0xFC09 -#define HERMES_RID_CNFPMEPS 0xFC0A -#define HERMES_RID_CNFMULTICASTRECEIVE 0xFC0B -#define HERMES_RID_CNFMAXSLEEPDURATION 0xFC0C -#define HERMES_RID_CNFPMHOLDOVERDURATION 0xFC0D -#define HERMES_RID_CNFOWNNAME 0xFC0E -#define HERMES_RID_CNFOWNDTIMPERIOD 0xFC10 -#define HERMES_RID_CNFWDSADDRESS1 0xFC11 -#define HERMES_RID_CNFWDSADDRESS2 0xFC12 -#define HERMES_RID_CNFWDSADDRESS3 0xFC13 -#define HERMES_RID_CNFWDSADDRESS4 0xFC14 -#define HERMES_RID_CNFWDSADDRESS5 0xFC15 -#define HERMES_RID_CNFWDSADDRESS6 0xFC16 -#define HERMES_RID_CNFMULTICASTPMBUFFERING 0xFC17 -#define HERMES_RID_CNFWEPENABLED_AGERE 0xFC20 -#define HERMES_RID_CNFAUTHENTICATION_AGERE 0xFC21 -#define HERMES_RID_CNFMANDATORYBSSID_SYMBOL 0xFC21 -#define HERMES_RID_CNFDROPUNENCRYPTED 0xFC22 -#define HERMES_RID_CNFWEPDEFAULTKEYID 0xFC23 -#define HERMES_RID_CNFDEFAULTKEY0 0xFC24 -#define HERMES_RID_CNFDEFAULTKEY1 0xFC25 -#define HERMES_RID_CNFMWOROBUST_AGERE 0xFC25 -#define HERMES_RID_CNFDEFAULTKEY2 0xFC26 -#define HERMES_RID_CNFDEFAULTKEY3 0xFC27 -#define HERMES_RID_CNFWEPFLAGS_INTERSIL 0xFC28 -#define HERMES_RID_CNFWEPKEYMAPPINGTABLE 0xFC29 -#define HERMES_RID_CNFAUTHENTICATION 0xFC2A -#define HERMES_RID_CNFMAXASSOCSTA 0xFC2B -#define HERMES_RID_CNFKEYLENGTH_SYMBOL 0xFC2B -#define HERMES_RID_CNFTXCONTROL 0xFC2C -#define HERMES_RID_CNFROAMINGMODE 0xFC2D -#define HERMES_RID_CNFHOSTAUTHENTICATION 0xFC2E -#define HERMES_RID_CNFRCVCRCERROR 0xFC30 -#define HERMES_RID_CNFMMLIFE 0xFC31 -#define HERMES_RID_CNFALTRETRYCOUNT 0xFC32 -#define HERMES_RID_CNFBEACONINT 0xFC33 -#define HERMES_RID_CNFAPPCFINFO 0xFC34 -#define HERMES_RID_CNFSTAPCFINFO 0xFC35 -#define HERMES_RID_CNFPRIORITYQUSAGE 0xFC37 -#define HERMES_RID_CNFTIMCTRL 0xFC40 -#define HERMES_RID_CNFTHIRTY2TALLY 0xFC42 -#define HERMES_RID_CNFENHSECURITY 0xFC43 -#define HERMES_RID_CNFGROUPADDRESSES 0xFC80 -#define HERMES_RID_CNFCREATEIBSS 0xFC81 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD 0xFC82 -#define HERMES_RID_CNFRTSTHRESHOLD 0xFC83 -#define HERMES_RID_CNFTXRATECONTROL 0xFC84 -#define HERMES_RID_CNFPROMISCUOUSMODE 0xFC85 -#define HERMES_RID_CNFBASICRATES_SYMBOL 0xFC8A -#define HERMES_RID_CNFPREAMBLE_SYMBOL 0xFC8C -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD0 0xFC90 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD1 0xFC91 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD2 0xFC92 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD3 0xFC93 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD4 0xFC94 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD5 0xFC95 -#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD6 0xFC96 -#define HERMES_RID_CNFRTSTHRESHOLD0 0xFC97 -#define HERMES_RID_CNFRTSTHRESHOLD1 0xFC98 -#define HERMES_RID_CNFRTSTHRESHOLD2 0xFC99 -#define HERMES_RID_CNFRTSTHRESHOLD3 0xFC9A -#define HERMES_RID_CNFRTSTHRESHOLD4 0xFC9B -#define HERMES_RID_CNFRTSTHRESHOLD5 0xFC9C -#define HERMES_RID_CNFRTSTHRESHOLD6 0xFC9D -#define HERMES_RID_CNFHOSTSCAN_SYMBOL 0xFCAB -#define HERMES_RID_CNFSHORTPREAMBLE 0xFCB0 -#define HERMES_RID_CNFWEPKEYS_AGERE 0xFCB0 -#define HERMES_RID_CNFEXCLUDELONGPREAMBLE 0xFCB1 -#define HERMES_RID_CNFTXKEY_AGERE 0xFCB1 -#define HERMES_RID_CNFAUTHENTICATIONRSPTO 0xFCB2 -#define HERMES_RID_CNFSCANSSID_AGERE 0xFCB2 -#define HERMES_RID_CNFBASICRATES 0xFCB3 -#define HERMES_RID_CNFSUPPORTEDRATES 0xFCB4 -#define HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE 0xFCB4 -#define HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE 0xFCB5 -#define HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE 0xFCB6 -#define HERMES_RID_CNFADDMAPPEDTKIPKEY_AGERE 0xFCB7 -#define HERMES_RID_CNFREMMAPPEDTKIPKEY_AGERE 0xFCB8 -#define HERMES_RID_CNFSETWPACAPABILITIES_AGERE 0xFCB9 -#define HERMES_RID_CNFCACHEDPMKADDRESS 0xFCBA -#define HERMES_RID_CNFREMOVEPMKADDRESS 0xFCBB -#define HERMES_RID_CNFSCANCHANNELS2GHZ 0xFCC2 -#define HERMES_RID_CNFDISASSOCIATE 0xFCC8 -#define HERMES_RID_CNFTICKTIME 0xFCE0 -#define HERMES_RID_CNFSCANREQUEST 0xFCE1 -#define HERMES_RID_CNFJOINREQUEST 0xFCE2 -#define HERMES_RID_CNFAUTHENTICATESTATION 0xFCE3 -#define HERMES_RID_CNFCHANNELINFOREQUEST 0xFCE4 -#define HERMES_RID_CNFHOSTSCAN 0xFCE5 - -/* - * Information RIDs - */ -#define HERMES_RID_MAXLOADTIME 0xFD00 -#define HERMES_RID_DOWNLOADBUFFER 0xFD01 -#define HERMES_RID_PRIID 0xFD02 -#define HERMES_RID_PRISUPRANGE 0xFD03 -#define HERMES_RID_CFIACTRANGES 0xFD04 -#define HERMES_RID_NICSERNUM 0xFD0A -#define HERMES_RID_NICID 0xFD0B -#define HERMES_RID_MFISUPRANGE 0xFD0C -#define HERMES_RID_CFISUPRANGE 0xFD0D -#define HERMES_RID_CHANNELLIST 0xFD10 -#define HERMES_RID_REGULATORYDOMAINS 0xFD11 -#define HERMES_RID_TEMPTYPE 0xFD12 -#define HERMES_RID_CIS 0xFD13 -#define HERMES_RID_STAID 0xFD20 -#define HERMES_RID_STASUPRANGE 0xFD21 -#define HERMES_RID_MFIACTRANGES 0xFD22 -#define HERMES_RID_CFIACTRANGES2 0xFD23 -#define HERMES_RID_SECONDARYVERSION_SYMBOL 0xFD24 -#define HERMES_RID_PORTSTATUS 0xFD40 -#define HERMES_RID_CURRENTSSID 0xFD41 -#define HERMES_RID_CURRENTBSSID 0xFD42 -#define HERMES_RID_COMMSQUALITY 0xFD43 -#define HERMES_RID_CURRENTTXRATE 0xFD44 -#define HERMES_RID_CURRENTBEACONINTERVAL 0xFD45 -#define HERMES_RID_CURRENTSCALETHRESHOLDS 0xFD46 -#define HERMES_RID_PROTOCOLRSPTIME 0xFD47 -#define HERMES_RID_SHORTRETRYLIMIT 0xFD48 -#define HERMES_RID_LONGRETRYLIMIT 0xFD49 -#define HERMES_RID_MAXTRANSMITLIFETIME 0xFD4A -#define HERMES_RID_MAXRECEIVELIFETIME 0xFD4B -#define HERMES_RID_CFPOLLABLE 0xFD4C -#define HERMES_RID_AUTHENTICATIONALGORITHMS 0xFD4D -#define HERMES_RID_PRIVACYOPTIONIMPLEMENTED 0xFD4F -#define HERMES_RID_DBMCOMMSQUALITY_INTERSIL 0xFD51 -#define HERMES_RID_CURRENTTXRATE1 0xFD80 -#define HERMES_RID_CURRENTTXRATE2 0xFD81 -#define HERMES_RID_CURRENTTXRATE3 0xFD82 -#define HERMES_RID_CURRENTTXRATE4 0xFD83 -#define HERMES_RID_CURRENTTXRATE5 0xFD84 -#define HERMES_RID_CURRENTTXRATE6 0xFD85 -#define HERMES_RID_OWNMACADDR 0xFD86 -#define HERMES_RID_SCANRESULTSTABLE 0xFD88 -#define HERMES_RID_CURRENT_COUNTRY_INFO 0xFD89 -#define HERMES_RID_CURRENT_WPA_IE 0xFD8A -#define HERMES_RID_CURRENT_TKIP_IV 0xFD8B -#define HERMES_RID_CURRENT_ASSOC_REQ_INFO 0xFD8C -#define HERMES_RID_CURRENT_ASSOC_RESP_INFO 0xFD8D -#define HERMES_RID_TXQUEUEEMPTY 0xFD91 -#define HERMES_RID_PHYTYPE 0xFDC0 -#define HERMES_RID_CURRENTCHANNEL 0xFDC1 -#define HERMES_RID_CURRENTPOWERSTATE 0xFDC2 -#define HERMES_RID_CCAMODE 0xFDC3 -#define HERMES_RID_SUPPORTEDDATARATES 0xFDC6 -#define HERMES_RID_BUILDSEQ 0xFFFE -#define HERMES_RID_FWID 0xFFFF - -#endif diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c deleted file mode 100644 index f4ea08f96970..000000000000 --- a/drivers/net/wireless/orinoco.c +++ /dev/null @@ -1,6032 +0,0 @@ -/* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c) - * - * A driver for Hermes or Prism 2 chipset based PCMCIA wireless - * adaptors, with Lucent/Agere, Intersil or Symbol firmware. - * - * Current maintainers (as of 29 September 2003) are: - * Pavel Roskin - * and David Gibson - * - * (C) Copyright David Gibson, IBM Corporation 2001-2003. - * Copyright (C) 2000 David Gibson, Linuxcare Australia. - * With some help from : - * Copyright (C) 2001 Jean Tourrilhes, HP Labs - * Copyright (C) 2001 Benjamin Herrenschmidt - * - * Based on dummy_cs.c 1.27 2000/06/12 21:27:25 - * - * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus - * http://www.stud.fh-dortmund.de/~andy/wvlan/ - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * The initial developer of the original code is David A. Hinds - * . Portions created by David - * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights - * Reserved. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. */ - -/* - * TODO - * o Handle de-encapsulation within network layer, provide 802.11 - * headers (patch from Thomas 'Dent' Mirlacher) - * o Fix possible races in SPY handling. - * o Disconnect wireless extensions from fundamental configuration. - * o (maybe) Software WEP support (patch from Stano Meduna). - * o (maybe) Use multiple Tx buffers - driver handling queue - * rather than firmware. - */ - -/* Locking and synchronization: - * - * The basic principle is that everything is serialized through a - * single spinlock, priv->lock. The lock is used in user, bh and irq - * context, so when taken outside hardirq context it should always be - * taken with interrupts disabled. The lock protects both the - * hardware and the struct orinoco_private. - * - * Another flag, priv->hw_unavailable indicates that the hardware is - * unavailable for an extended period of time (e.g. suspended, or in - * the middle of a hard reset). This flag is protected by the - * spinlock. All code which touches the hardware should check the - * flag after taking the lock, and if it is set, give up on whatever - * they are doing and drop the lock again. The orinoco_lock() - * function handles this (it unlocks and returns -EBUSY if - * hw_unavailable is non-zero). - */ - -#define DRIVER_NAME "orinoco" - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "hermes_rid.h" -#include "hermes_dld.h" -#include "orinoco.h" - -/********************************************************************/ -/* Module information */ -/********************************************************************/ - -MODULE_AUTHOR("Pavel Roskin & David Gibson "); -MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards"); -MODULE_LICENSE("Dual MPL/GPL"); - -/* Level of debugging. Used in the macros in orinoco.h */ -#ifdef ORINOCO_DEBUG -int orinoco_debug = ORINOCO_DEBUG; -module_param(orinoco_debug, int, 0644); -MODULE_PARM_DESC(orinoco_debug, "Debug level"); -EXPORT_SYMBOL(orinoco_debug); -#endif - -static int suppress_linkstatus; /* = 0 */ -module_param(suppress_linkstatus, bool, 0644); -MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); -static int ignore_disconnect; /* = 0 */ -module_param(ignore_disconnect, int, 0644); -MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer"); - -static int force_monitor; /* = 0 */ -module_param(force_monitor, int, 0644); -MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions"); - -/********************************************************************/ -/* Compile time configuration and compatibility stuff */ -/********************************************************************/ - -/* We do this this way to avoid ifdefs in the actual code */ -#ifdef WIRELESS_SPY -#define SPY_NUMBER(priv) (priv->spy_data.spy_number) -#else -#define SPY_NUMBER(priv) 0 -#endif /* WIRELESS_SPY */ - -/********************************************************************/ -/* Internal constants */ -/********************************************************************/ - -/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ -static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; -#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) - -#define ORINOCO_MIN_MTU 256 -#define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD) - -#define SYMBOL_MAX_VER_LEN (14) -#define USER_BAP 0 -#define IRQ_BAP 1 -#define MAX_IRQLOOPS_PER_IRQ 10 -#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of - * how many events the - * device could - * legitimately generate */ -#define SMALL_KEY_SIZE 5 -#define LARGE_KEY_SIZE 13 -#define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */ - -#define DUMMY_FID 0xFFFF - -/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \ - HERMES_MAX_MULTICAST : 0)*/ -#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST) - -#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \ - | HERMES_EV_TX | HERMES_EV_TXEXC \ - | HERMES_EV_WTERR | HERMES_EV_INFO \ - | HERMES_EV_INFDROP ) - -#define MAX_RID_LEN 1024 - -static const struct iw_handler_def orinoco_handler_def; -static const struct ethtool_ops orinoco_ethtool_ops; - -/********************************************************************/ -/* Data tables */ -/********************************************************************/ - -/* The frequency of each channel in MHz */ -static const long channel_frequency[] = { - 2412, 2417, 2422, 2427, 2432, 2437, 2442, - 2447, 2452, 2457, 2462, 2467, 2472, 2484 -}; -#define NUM_CHANNELS ARRAY_SIZE(channel_frequency) - -/* This tables gives the actual meanings of the bitrate IDs returned - * by the firmware. */ -static struct { - int bitrate; /* in 100s of kilobits */ - int automatic; - u16 agere_txratectrl; - u16 intersil_txratectrl; -} bitrate_table[] = { - {110, 1, 3, 15}, /* Entry 0 is the default */ - {10, 0, 1, 1}, - {10, 1, 1, 1}, - {20, 0, 2, 2}, - {20, 1, 6, 3}, - {55, 0, 4, 4}, - {55, 1, 7, 7}, - {110, 0, 5, 8}, -}; -#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) - -/********************************************************************/ -/* Data types */ -/********************************************************************/ - -/* Beginning of the Tx descriptor, used in TxExc handling */ -struct hermes_txexc_data { - struct hermes_tx_descriptor desc; - __le16 frame_ctl; - __le16 duration_id; - u8 addr1[ETH_ALEN]; -} __attribute__ ((packed)); - -/* Rx frame header except compatibility 802.3 header */ -struct hermes_rx_descriptor { - /* Control */ - __le16 status; - __le32 time; - u8 silence; - u8 signal; - u8 rate; - u8 rxflow; - __le32 reserved; - - /* 802.11 header */ - __le16 frame_ctl; - __le16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 addr3[ETH_ALEN]; - __le16 seq_ctl; - u8 addr4[ETH_ALEN]; - - /* Data length */ - __le16 data_len; -} __attribute__ ((packed)); - -/********************************************************************/ -/* Function prototypes */ -/********************************************************************/ - -static int __orinoco_program_rids(struct net_device *dev); -static void __orinoco_set_multicast_list(struct net_device *dev); - -/********************************************************************/ -/* Michael MIC crypto setup */ -/********************************************************************/ -#define MICHAEL_MIC_LEN 8 -static int orinoco_mic_init(struct orinoco_private *priv) -{ - priv->tx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); - if (IS_ERR(priv->tx_tfm_mic)) { - printk(KERN_DEBUG "orinoco_mic_init: could not allocate " - "crypto API michael_mic\n"); - priv->tx_tfm_mic = NULL; - return -ENOMEM; - } - - priv->rx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); - if (IS_ERR(priv->rx_tfm_mic)) { - printk(KERN_DEBUG "orinoco_mic_init: could not allocate " - "crypto API michael_mic\n"); - priv->rx_tfm_mic = NULL; - return -ENOMEM; - } - - return 0; -} - -static void orinoco_mic_free(struct orinoco_private *priv) -{ - if (priv->tx_tfm_mic) - crypto_free_hash(priv->tx_tfm_mic); - if (priv->rx_tfm_mic) - crypto_free_hash(priv->rx_tfm_mic); -} - -static int michael_mic(struct crypto_hash *tfm_michael, u8 *key, - u8 *da, u8 *sa, u8 priority, - u8 *data, size_t data_len, u8 *mic) -{ - struct hash_desc desc; - struct scatterlist sg[2]; - u8 hdr[ETH_HLEN + 2]; /* size of header + padding */ - - if (tfm_michael == NULL) { - printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n"); - return -1; - } - - /* Copy header into buffer. We need the padding on the end zeroed */ - memcpy(&hdr[0], da, ETH_ALEN); - memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN); - hdr[ETH_ALEN*2] = priority; - hdr[ETH_ALEN*2+1] = 0; - hdr[ETH_ALEN*2+2] = 0; - hdr[ETH_ALEN*2+3] = 0; - - /* Use scatter gather to MIC header and data in one go */ - sg_init_table(sg, 2); - sg_set_buf(&sg[0], hdr, sizeof(hdr)); - sg_set_buf(&sg[1], data, data_len); - - if (crypto_hash_setkey(tfm_michael, key, MIC_KEYLEN)) - return -1; - - desc.tfm = tfm_michael; - desc.flags = 0; - return crypto_hash_digest(&desc, sg, data_len + sizeof(hdr), - mic); -} - -/********************************************************************/ -/* Internal helper functions */ -/********************************************************************/ - -static inline void set_port_type(struct orinoco_private *priv) -{ - switch (priv->iw_mode) { - case IW_MODE_INFRA: - priv->port_type = 1; - priv->createibss = 0; - break; - case IW_MODE_ADHOC: - if (priv->prefer_port3) { - priv->port_type = 3; - priv->createibss = 0; - } else { - priv->port_type = priv->ibss_port; - priv->createibss = 1; - } - break; - case IW_MODE_MONITOR: - priv->port_type = 3; - priv->createibss = 0; - break; - default: - printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", - priv->ndev->name); - } -} - -#define ORINOCO_MAX_BSS_COUNT 64 -static int orinoco_bss_data_allocate(struct orinoco_private *priv) -{ - if (priv->bss_xbss_data) - return 0; - - if (priv->has_ext_scan) - priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT * - sizeof(struct xbss_element), - GFP_KERNEL); - else - priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT * - sizeof(struct bss_element), - GFP_KERNEL); - - if (!priv->bss_xbss_data) { - printk(KERN_WARNING "Out of memory allocating beacons"); - return -ENOMEM; - } - return 0; -} - -static void orinoco_bss_data_free(struct orinoco_private *priv) -{ - kfree(priv->bss_xbss_data); - priv->bss_xbss_data = NULL; -} - -#define PRIV_BSS ((struct bss_element *)priv->bss_xbss_data) -#define PRIV_XBSS ((struct xbss_element *)priv->bss_xbss_data) -static void orinoco_bss_data_init(struct orinoco_private *priv) -{ - int i; - - INIT_LIST_HEAD(&priv->bss_free_list); - INIT_LIST_HEAD(&priv->bss_list); - if (priv->has_ext_scan) - for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++) - list_add_tail(&(PRIV_XBSS[i].list), - &priv->bss_free_list); - else - for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++) - list_add_tail(&(PRIV_BSS[i].list), - &priv->bss_free_list); - -} - -static inline u8 *orinoco_get_ie(u8 *data, size_t len, - enum ieee80211_eid eid) -{ - u8 *p = data; - while ((p + 2) < (data + len)) { - if (p[0] == eid) - return p; - p += p[1] + 2; - } - return NULL; -} - -#define WPA_OUI_TYPE "\x00\x50\xF2\x01" -#define WPA_SELECTOR_LEN 4 -static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len) -{ - u8 *p = data; - while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) { - if ((p[0] == WLAN_EID_GENERIC) && - (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0)) - return p; - p += p[1] + 2; - } - return NULL; -} - - -/********************************************************************/ -/* Download functionality */ -/********************************************************************/ - -struct fw_info { - char *pri_fw; - char *sta_fw; - char *ap_fw; - u32 pda_addr; - u16 pda_size; -}; - -const static struct fw_info orinoco_fw[] = { - { "", "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 }, - { "", "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 }, - { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", "", 0x00003100, 512 } -}; - -/* Structure used to access fields in FW - * Make sure LE decoding macros are used - */ -struct orinoco_fw_header { - char hdr_vers[6]; /* ASCII string for header version */ - __le16 headersize; /* Total length of header */ - __le32 entry_point; /* NIC entry point */ - __le32 blocks; /* Number of blocks to program */ - __le32 block_offset; /* Offset of block data from eof header */ - __le32 pdr_offset; /* Offset to PDR data from eof header */ - __le32 pri_offset; /* Offset to primary plug data */ - __le32 compat_offset; /* Offset to compatibility data*/ - char signature[0]; /* FW signature length headersize-20 */ -} __attribute__ ((packed)); - -/* Download either STA or AP firmware into the card. */ -static int -orinoco_dl_firmware(struct orinoco_private *priv, - const struct fw_info *fw, - int ap) -{ - /* Plug Data Area (PDA) */ - __le16 *pda; - - hermes_t *hw = &priv->hw; - const struct firmware *fw_entry; - const struct orinoco_fw_header *hdr; - const unsigned char *first_block; - const unsigned char *end; - const char *firmware; - struct net_device *dev = priv->ndev; - int err = 0; - - pda = kzalloc(fw->pda_size, GFP_KERNEL); - if (!pda) - return -ENOMEM; - - if (ap) - firmware = fw->ap_fw; - else - firmware = fw->sta_fw; - - printk(KERN_DEBUG "%s: Attempting to download firmware %s\n", - dev->name, firmware); - - /* Read current plug data */ - err = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 0); - printk(KERN_DEBUG "%s: Read PDA returned %d\n", dev->name, err); - if (err) - goto free; - - if (priv->cached_fw) - fw_entry = priv->cached_fw; - else { - err = request_firmware(&fw_entry, firmware, priv->dev); - if (err) { - printk(KERN_ERR "%s: Cannot find firmware %s\n", - dev->name, firmware); - err = -ENOENT; - goto free; - } - priv->cached_fw = fw_entry; - } - - hdr = (const struct orinoco_fw_header *) fw_entry->data; - - /* Enable aux port to allow programming */ - err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point)); - printk(KERN_DEBUG "%s: Program init returned %d\n", dev->name, err); - if (err != 0) - goto abort; - - /* Program data */ - first_block = (fw_entry->data + - le16_to_cpu(hdr->headersize) + - le32_to_cpu(hdr->block_offset)); - end = fw_entry->data + fw_entry->size; - - err = hermes_program(hw, first_block, end); - printk(KERN_DEBUG "%s: Program returned %d\n", dev->name, err); - if (err != 0) - goto abort; - - /* Update production data */ - first_block = (fw_entry->data + - le16_to_cpu(hdr->headersize) + - le32_to_cpu(hdr->pdr_offset)); - - err = hermes_apply_pda_with_defaults(hw, first_block, pda); - printk(KERN_DEBUG "%s: Apply PDA returned %d\n", dev->name, err); - if (err) - goto abort; - - /* Tell card we've finished */ - err = hermesi_program_end(hw); - printk(KERN_DEBUG "%s: Program end returned %d\n", dev->name, err); - if (err != 0) - goto abort; - - /* Check if we're running */ - printk(KERN_DEBUG "%s: hermes_present returned %d\n", - dev->name, hermes_present(hw)); - -abort: - /* In case of error, assume firmware was bogus and release it */ - if (err) { - priv->cached_fw = NULL; - release_firmware(fw_entry); - } - -free: - kfree(pda); - return err; -} - -/* End markers */ -#define TEXT_END 0x1A /* End of text header */ - -/* - * Process a firmware image - stop the card, load the firmware, reset - * the card and make sure it responds. For the secondary firmware take - * care of the PDA - read it and then write it on top of the firmware. - */ -static int -symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw, - const unsigned char *image, const unsigned char *end, - int secondary) -{ - hermes_t *hw = &priv->hw; - int ret = 0; - const unsigned char *ptr; - const unsigned char *first_block; - - /* Plug Data Area (PDA) */ - __le16 *pda = NULL; - - /* Binary block begins after the 0x1A marker */ - ptr = image; - while (*ptr++ != TEXT_END); - first_block = ptr; - - /* Read the PDA from EEPROM */ - if (secondary) { - pda = kzalloc(fw->pda_size, GFP_KERNEL); - if (!pda) - return -ENOMEM; - - ret = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 1); - if (ret) - goto free; - } - - /* Stop the firmware, so that it can be safely rewritten */ - if (priv->stop_fw) { - ret = priv->stop_fw(priv, 1); - if (ret) - goto free; - } - - /* Program the adapter with new firmware */ - ret = hermes_program(hw, first_block, end); - if (ret) - goto free; - - /* Write the PDA to the adapter */ - if (secondary) { - size_t len = hermes_blocks_length(first_block); - ptr = first_block + len; - ret = hermes_apply_pda(hw, ptr, pda); - kfree(pda); - if (ret) - return ret; - } - - /* Run the firmware */ - if (priv->stop_fw) { - ret = priv->stop_fw(priv, 0); - if (ret) - return ret; - } - - /* Reset hermes chip and make sure it responds */ - ret = hermes_init(hw); - - /* hermes_reset() should return 0 with the secondary firmware */ - if (secondary && ret != 0) - return -ENODEV; - - /* And this should work with any firmware */ - if (!hermes_present(hw)) - return -ENODEV; - - return 0; - -free: - kfree(pda); - return ret; -} - - -/* - * Download the firmware into the card, this also does a PCMCIA soft - * reset on the card, to make sure it's in a sane state. - */ -static int -symbol_dl_firmware(struct orinoco_private *priv, - const struct fw_info *fw) -{ - struct net_device *dev = priv->ndev; - int ret; - const struct firmware *fw_entry; - - if (request_firmware(&fw_entry, fw->pri_fw, - priv->dev) != 0) { - printk(KERN_ERR "%s: Cannot find firmware: %s\n", - dev->name, fw->pri_fw); - return -ENOENT; - } - - /* Load primary firmware */ - ret = symbol_dl_image(priv, fw, fw_entry->data, - fw_entry->data + fw_entry->size, 0); - release_firmware(fw_entry); - if (ret) { - printk(KERN_ERR "%s: Primary firmware download failed\n", - dev->name); - return ret; - } - - if (request_firmware(&fw_entry, fw->sta_fw, - priv->dev) != 0) { - printk(KERN_ERR "%s: Cannot find firmware: %s\n", - dev->name, fw->sta_fw); - return -ENOENT; - } - - /* Load secondary firmware */ - ret = symbol_dl_image(priv, fw, fw_entry->data, - fw_entry->data + fw_entry->size, 1); - release_firmware(fw_entry); - if (ret) { - printk(KERN_ERR "%s: Secondary firmware download failed\n", - dev->name); - } - - return ret; -} - -static int orinoco_download(struct orinoco_private *priv) -{ - int err = 0; - /* Reload firmware */ - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - /* case FIRMWARE_TYPE_INTERSIL: */ - err = orinoco_dl_firmware(priv, - &orinoco_fw[priv->firmware_type], 0); - break; - - case FIRMWARE_TYPE_SYMBOL: - err = symbol_dl_firmware(priv, - &orinoco_fw[priv->firmware_type]); - break; - case FIRMWARE_TYPE_INTERSIL: - break; - } - /* TODO: if we fail we probably need to reinitialise - * the driver */ - - return err; -} - -/********************************************************************/ -/* Device methods */ -/********************************************************************/ - -static int orinoco_open(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - int err; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = __orinoco_up(dev); - - if (! err) - priv->open = 1; - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_stop(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = 0; - - /* We mustn't use orinoco_lock() here, because we need to be - able to close the interface even if hw_unavailable is set - (e.g. as we're released after a PC Card removal) */ - spin_lock_irq(&priv->lock); - - priv->open = 0; - - err = __orinoco_down(dev); - - spin_unlock_irq(&priv->lock); - - return err; -} - -static struct net_device_stats *orinoco_get_stats(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - - return &priv->stats; -} - -static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - struct iw_statistics *wstats = &priv->wstats; - int err; - unsigned long flags; - - if (! netif_device_present(dev)) { - printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n", - dev->name); - return NULL; /* FIXME: Can we do better than this? */ - } - - /* If busy, return the old stats. Returning NULL may cause - * the interface to disappear from /proc/net/wireless */ - if (orinoco_lock(priv, &flags) != 0) - return wstats; - - /* We can't really wait for the tallies inquiry command to - * complete, so we just use the previous results and trigger - * a new tallies inquiry command for next time - Jean II */ - /* FIXME: Really we should wait for the inquiry to come back - - * as it is the stats we give don't make a whole lot of sense. - * Unfortunately, it's not clear how to do that within the - * wireless extensions framework: I think we're in user - * context, but a lock seems to be held by the time we get in - * here so we're not safe to sleep here. */ - hermes_inquire(hw, HERMES_INQ_TALLIES); - - if (priv->iw_mode == IW_MODE_ADHOC) { - memset(&wstats->qual, 0, sizeof(wstats->qual)); - /* If a spy address is defined, we report stats of the - * first spy address - Jean II */ - if (SPY_NUMBER(priv)) { - wstats->qual.qual = priv->spy_data.spy_stat[0].qual; - wstats->qual.level = priv->spy_data.spy_stat[0].level; - wstats->qual.noise = priv->spy_data.spy_stat[0].noise; - wstats->qual.updated = priv->spy_data.spy_stat[0].updated; - } - } else { - struct { - __le16 qual, signal, noise, unused; - } __attribute__ ((packed)) cq; - - err = HERMES_READ_RECORD(hw, USER_BAP, - HERMES_RID_COMMSQUALITY, &cq); - - if (!err) { - wstats->qual.qual = (int)le16_to_cpu(cq.qual); - wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; - wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; - wstats->qual.updated = 7; - } - } - - orinoco_unlock(priv, &flags); - return wstats; -} - -static void orinoco_set_multicast_list(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) { - printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " - "called when hw_unavailable\n", dev->name); - return; - } - - __orinoco_set_multicast_list(dev); - orinoco_unlock(priv, &flags); -} - -static int orinoco_change_mtu(struct net_device *dev, int new_mtu) -{ - struct orinoco_private *priv = netdev_priv(dev); - - if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) ) - return -EINVAL; - - /* MTU + encapsulation + header length */ - if ( (new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) > - (priv->nicbuf_size - ETH_HLEN) ) - return -EINVAL; - - dev->mtu = new_mtu; - - return 0; -} - -/********************************************************************/ -/* Tx path */ -/********************************************************************/ - -static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - hermes_t *hw = &priv->hw; - int err = 0; - u16 txfid = priv->txfid; - struct ethhdr *eh; - int tx_control; - unsigned long flags; - - if (! netif_running(dev)) { - printk(KERN_ERR "%s: Tx on stopped device!\n", - dev->name); - return NETDEV_TX_BUSY; - } - - if (netif_queue_stopped(dev)) { - printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", - dev->name); - return NETDEV_TX_BUSY; - } - - if (orinoco_lock(priv, &flags) != 0) { - printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", - dev->name); - return NETDEV_TX_BUSY; - } - - if (! netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) { - /* Oops, the firmware hasn't established a connection, - silently drop the packet (this seems to be the - safest approach). */ - goto drop; - } - - /* Check packet length */ - if (skb->len < ETH_HLEN) - goto drop; - - tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX; - - if (priv->encode_alg == IW_ENCODE_ALG_TKIP) - tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) | - HERMES_TXCTRL_MIC; - - if (priv->has_alt_txcntl) { - /* WPA enabled firmwares have tx_cntl at the end of - * the 802.11 header. So write zeroed descriptor and - * 802.11 header at the same time - */ - char desc[HERMES_802_3_OFFSET]; - __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET]; - - memset(&desc, 0, sizeof(desc)); - - *txcntl = cpu_to_le16(tx_control); - err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), - txfid, 0); - if (err) { - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d writing Tx " - "descriptor to BAP\n", dev->name, err); - goto busy; - } - } else { - struct hermes_tx_descriptor desc; - - memset(&desc, 0, sizeof(desc)); - - desc.tx_control = cpu_to_le16(tx_control); - err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), - txfid, 0); - if (err) { - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d writing Tx " - "descriptor to BAP\n", dev->name, err); - goto busy; - } - - /* Clear the 802.11 header and data length fields - some - * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused - * if this isn't done. */ - hermes_clear_words(hw, HERMES_DATA0, - HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); - } - - eh = (struct ethhdr *)skb->data; - - /* Encapsulate Ethernet-II frames */ - if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ - struct header_struct { - struct ethhdr eth; /* 802.3 header */ - u8 encap[6]; /* 802.2 header */ - } __attribute__ ((packed)) hdr; - - /* Strip destination and source from the data */ - skb_pull(skb, 2 * ETH_ALEN); - - /* And move them to a separate header */ - memcpy(&hdr.eth, eh, 2 * ETH_ALEN); - hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len); - memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr)); - - /* Insert the SNAP header */ - if (skb_headroom(skb) < sizeof(hdr)) { - printk(KERN_ERR - "%s: Not enough headroom for 802.2 headers %d\n", - dev->name, skb_headroom(skb)); - goto drop; - } - eh = (struct ethhdr *) skb_push(skb, sizeof(hdr)); - memcpy(eh, &hdr, sizeof(hdr)); - } - - err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len, - txfid, HERMES_802_3_OFFSET); - if (err) { - printk(KERN_ERR "%s: Error %d writing packet to BAP\n", - dev->name, err); - goto busy; - } - - /* Calculate Michael MIC */ - if (priv->encode_alg == IW_ENCODE_ALG_TKIP) { - u8 mic_buf[MICHAEL_MIC_LEN + 1]; - u8 *mic; - size_t offset; - size_t len; - - if (skb->len % 2) { - /* MIC start is on an odd boundary */ - mic_buf[0] = skb->data[skb->len - 1]; - mic = &mic_buf[1]; - offset = skb->len - 1; - len = MICHAEL_MIC_LEN + 1; - } else { - mic = &mic_buf[0]; - offset = skb->len; - len = MICHAEL_MIC_LEN; - } - - michael_mic(priv->tx_tfm_mic, - priv->tkip_key[priv->tx_key].tx_mic, - eh->h_dest, eh->h_source, 0 /* priority */, - skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic); - - /* Write the MIC */ - err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len, - txfid, HERMES_802_3_OFFSET + offset); - if (err) { - printk(KERN_ERR "%s: Error %d writing MIC to BAP\n", - dev->name, err); - goto busy; - } - } - - /* Finally, we actually initiate the send */ - netif_stop_queue(dev); - - err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, - txfid, NULL); - if (err) { - netif_start_queue(dev); - if (net_ratelimit()) - printk(KERN_ERR "%s: Error %d transmitting packet\n", - dev->name, err); - goto busy; - } - - dev->trans_start = jiffies; - stats->tx_bytes += HERMES_802_3_OFFSET + skb->len; - goto ok; - - drop: - stats->tx_errors++; - stats->tx_dropped++; - - ok: - orinoco_unlock(priv, &flags); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - - busy: - if (err == -EIO) - schedule_work(&priv->reset_work); - orinoco_unlock(priv, &flags); - return NETDEV_TX_BUSY; -} - -static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw) -{ - struct orinoco_private *priv = netdev_priv(dev); - u16 fid = hermes_read_regn(hw, ALLOCFID); - - if (fid != priv->txfid) { - if (fid != DUMMY_FID) - printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", - dev->name, fid); - return; - } - - hermes_write_regn(hw, ALLOCFID, DUMMY_FID); -} - -static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - - stats->tx_packets++; - - netif_wake_queue(dev); - - hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); -} - -static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - u16 fid = hermes_read_regn(hw, TXCOMPLFID); - u16 status; - struct hermes_txexc_data hdr; - int err = 0; - - if (fid == DUMMY_FID) - return; /* Nothing's really happened */ - - /* Read part of the frame header - we need status and addr1 */ - err = hermes_bap_pread(hw, IRQ_BAP, &hdr, - sizeof(struct hermes_txexc_data), - fid, 0); - - hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); - stats->tx_errors++; - - if (err) { - printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " - "(FID=%04X error %d)\n", - dev->name, fid, err); - return; - } - - DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name, - err, fid); - - /* We produce a TXDROP event only for retry or lifetime - * exceeded, because that's the only status that really mean - * that this particular node went away. - * Other errors means that *we* screwed up. - Jean II */ - status = le16_to_cpu(hdr.desc.status); - if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { - union iwreq_data wrqu; - - /* Copy 802.11 dest address. - * We use the 802.11 header because the frame may - * not be 802.3 or may be mangled... - * In Ad-Hoc mode, it will be the node address. - * In managed mode, it will be most likely the AP addr - * User space will figure out how to convert it to - * whatever it needs (IP address or else). - * - Jean II */ - memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN); - wrqu.addr.sa_family = ARPHRD_ETHER; - - /* Send event to user space */ - wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); - } - - netif_wake_queue(dev); -} - -static void orinoco_tx_timeout(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - struct hermes *hw = &priv->hw; - - printk(KERN_WARNING "%s: Tx timeout! " - "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n", - dev->name, hermes_read_regn(hw, ALLOCFID), - hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT)); - - stats->tx_errors++; - - schedule_work(&priv->reset_work); -} - -/********************************************************************/ -/* Rx path (data frames) */ -/********************************************************************/ - -/* Does the frame have a SNAP header indicating it should be - * de-encapsulated to Ethernet-II? */ -static inline int is_ethersnap(void *_hdr) -{ - u8 *hdr = _hdr; - - /* We de-encapsulate all packets which, a) have SNAP headers - * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header - * and where b) the OUI of the SNAP header is 00:00:00 or - * 00:00:f8 - we need both because different APs appear to use - * different OUIs for some reason */ - return (memcmp(hdr, &encaps_hdr, 5) == 0) - && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) ); -} - -static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, - int level, int noise) -{ - struct iw_quality wstats; - wstats.level = level - 0x95; - wstats.noise = noise - 0x95; - wstats.qual = (level > noise) ? (level - noise) : 0; - wstats.updated = 7; - /* Update spy records */ - wireless_spy_update(dev, mac, &wstats); -} - -static void orinoco_stat_gather(struct net_device *dev, - struct sk_buff *skb, - struct hermes_rx_descriptor *desc) -{ - struct orinoco_private *priv = netdev_priv(dev); - - /* Using spy support with lots of Rx packets, like in an - * infrastructure (AP), will really slow down everything, because - * the MAC address must be compared to each entry of the spy list. - * If the user really asks for it (set some address in the - * spy list), we do it, but he will pay the price. - * Note that to get here, you need both WIRELESS_SPY - * compiled in AND some addresses in the list !!! - */ - /* Note : gcc will optimise the whole section away if - * WIRELESS_SPY is not defined... - Jean II */ - if (SPY_NUMBER(priv)) { - orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN, - desc->signal, desc->silence); - } -} - -/* - * orinoco_rx_monitor - handle received monitor frames. - * - * Arguments: - * dev network device - * rxfid received FID - * desc rx descriptor of the frame - * - * Call context: interrupt - */ -static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, - struct hermes_rx_descriptor *desc) -{ - u32 hdrlen = 30; /* return full header by default */ - u32 datalen = 0; - u16 fc; - int err; - int len; - struct sk_buff *skb; - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - hermes_t *hw = &priv->hw; - - len = le16_to_cpu(desc->data_len); - - /* Determine the size of the header and the data */ - fc = le16_to_cpu(desc->frame_ctl); - switch (fc & IEEE80211_FCTL_FTYPE) { - case IEEE80211_FTYPE_DATA: - if ((fc & IEEE80211_FCTL_TODS) - && (fc & IEEE80211_FCTL_FROMDS)) - hdrlen = 30; - else - hdrlen = 24; - datalen = len; - break; - case IEEE80211_FTYPE_MGMT: - hdrlen = 24; - datalen = len; - break; - case IEEE80211_FTYPE_CTL: - switch (fc & IEEE80211_FCTL_STYPE) { - case IEEE80211_STYPE_PSPOLL: - case IEEE80211_STYPE_RTS: - case IEEE80211_STYPE_CFEND: - case IEEE80211_STYPE_CFENDACK: - hdrlen = 16; - break; - case IEEE80211_STYPE_CTS: - case IEEE80211_STYPE_ACK: - hdrlen = 10; - break; - } - break; - default: - /* Unknown frame type */ - break; - } - - /* sanity check the length */ - if (datalen > IEEE80211_MAX_DATA_LEN + 12) { - printk(KERN_DEBUG "%s: oversized monitor frame, " - "data length = %d\n", dev->name, datalen); - stats->rx_length_errors++; - goto update_stats; - } - - skb = dev_alloc_skb(hdrlen + datalen); - if (!skb) { - printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n", - dev->name); - goto update_stats; - } - - /* Copy the 802.11 header to the skb */ - memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen); - skb_reset_mac_header(skb); - - /* If any, copy the data from the card to the skb */ - if (datalen > 0) { - err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen), - ALIGN(datalen, 2), rxfid, - HERMES_802_2_OFFSET); - if (err) { - printk(KERN_ERR "%s: error %d reading monitor frame\n", - dev->name, err); - goto drop; - } - } - - skb->dev = dev; - skb->ip_summed = CHECKSUM_NONE; - skb->pkt_type = PACKET_OTHERHOST; - skb->protocol = __constant_htons(ETH_P_802_2); - - stats->rx_packets++; - stats->rx_bytes += skb->len; - - netif_rx(skb); - return; - - drop: - dev_kfree_skb_irq(skb); - update_stats: - stats->rx_errors++; - stats->rx_dropped++; -} - -/* Get tsc from the firmware */ -static int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, - u8 *tsc) -{ - hermes_t *hw = &priv->hw; - int err = 0; - u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE]; - - if ((key < 0) || (key > 4)) - return -EINVAL; - - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, - sizeof(tsc_arr), NULL, &tsc_arr); - if (!err) - memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0])); - - return err; -} - -static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - struct iw_statistics *wstats = &priv->wstats; - struct sk_buff *skb = NULL; - u16 rxfid, status; - int length; - struct hermes_rx_descriptor *desc; - struct orinoco_rx_data *rx_data; - int err; - - desc = kmalloc(sizeof(*desc), GFP_ATOMIC); - if (!desc) { - printk(KERN_WARNING - "%s: Can't allocate space for RX descriptor\n", - dev->name); - goto update_stats; - } - - rxfid = hermes_read_regn(hw, RXFID); - - err = hermes_bap_pread(hw, IRQ_BAP, desc, sizeof(*desc), - rxfid, 0); - if (err) { - printk(KERN_ERR "%s: error %d reading Rx descriptor. " - "Frame dropped.\n", dev->name, err); - goto update_stats; - } - - status = le16_to_cpu(desc->status); - - if (status & HERMES_RXSTAT_BADCRC) { - DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", - dev->name); - stats->rx_crc_errors++; - goto update_stats; - } - - /* Handle frames in monitor mode */ - if (priv->iw_mode == IW_MODE_MONITOR) { - orinoco_rx_monitor(dev, rxfid, desc); - goto out; - } - - if (status & HERMES_RXSTAT_UNDECRYPTABLE) { - DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", - dev->name); - wstats->discard.code++; - goto update_stats; - } - - length = le16_to_cpu(desc->data_len); - - /* Sanity checks */ - if (length < 3) { /* No for even an 802.2 LLC header */ - /* At least on Symbol firmware with PCF we get quite a - lot of these legitimately - Poll frames with no - data. */ - goto out; - } - if (length > IEEE80211_MAX_DATA_LEN) { - printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", - dev->name, length); - stats->rx_length_errors++; - goto update_stats; - } - - /* Payload size does not include Michael MIC. Increase payload - * size to read it together with the data. */ - if (status & HERMES_RXSTAT_MIC) - length += MICHAEL_MIC_LEN; - - /* We need space for the packet data itself, plus an ethernet - header, plus 2 bytes so we can align the IP header on a - 32bit boundary, plus 1 byte so we can read in odd length - packets from the card, which has an IO granularity of 16 - bits */ - skb = dev_alloc_skb(length+ETH_HLEN+2+1); - if (!skb) { - printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", - dev->name); - goto update_stats; - } - - /* We'll prepend the header, so reserve space for it. The worst - case is no decapsulation, when 802.3 header is prepended and - nothing is removed. 2 is for aligning the IP header. */ - skb_reserve(skb, ETH_HLEN + 2); - - err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length), - ALIGN(length, 2), rxfid, - HERMES_802_2_OFFSET); - if (err) { - printk(KERN_ERR "%s: error %d reading frame. " - "Frame dropped.\n", dev->name, err); - goto drop; - } - - /* Add desc and skb to rx queue */ - rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC); - if (!rx_data) { - printk(KERN_WARNING "%s: Can't allocate RX packet\n", - dev->name); - goto drop; - } - rx_data->desc = desc; - rx_data->skb = skb; - list_add_tail(&rx_data->list, &priv->rx_list); - tasklet_schedule(&priv->rx_tasklet); - - return; - -drop: - dev_kfree_skb_irq(skb); -update_stats: - stats->rx_errors++; - stats->rx_dropped++; -out: - kfree(desc); -} - -static void orinoco_rx(struct net_device *dev, - struct hermes_rx_descriptor *desc, - struct sk_buff *skb) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct net_device_stats *stats = &priv->stats; - u16 status, fc; - int length; - struct ethhdr *hdr; - - status = le16_to_cpu(desc->status); - length = le16_to_cpu(desc->data_len); - fc = le16_to_cpu(desc->frame_ctl); - - /* Calculate and check MIC */ - if (status & HERMES_RXSTAT_MIC) { - int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >> - HERMES_MIC_KEY_ID_SHIFT); - u8 mic[MICHAEL_MIC_LEN]; - u8 *rxmic; - u8 *src = (fc & IEEE80211_FCTL_FROMDS) ? - desc->addr3 : desc->addr2; - - /* Extract Michael MIC from payload */ - rxmic = skb->data + skb->len - MICHAEL_MIC_LEN; - - skb_trim(skb, skb->len - MICHAEL_MIC_LEN); - length -= MICHAEL_MIC_LEN; - - michael_mic(priv->rx_tfm_mic, - priv->tkip_key[key_id].rx_mic, - desc->addr1, - src, - 0, /* priority or QoS? */ - skb->data, - skb->len, - &mic[0]); - - if (memcmp(mic, rxmic, - MICHAEL_MIC_LEN)) { - union iwreq_data wrqu; - struct iw_michaelmicfailure wxmic; - - printk(KERN_WARNING "%s: " - "Invalid Michael MIC in data frame from %pM, " - "using key %i\n", - dev->name, src, key_id); - - /* TODO: update stats */ - - /* Notify userspace */ - memset(&wxmic, 0, sizeof(wxmic)); - wxmic.flags = key_id & IW_MICFAILURE_KEY_ID; - wxmic.flags |= (desc->addr1[0] & 1) ? - IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE; - wxmic.src_addr.sa_family = ARPHRD_ETHER; - memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN); - - (void) orinoco_hw_get_tkip_iv(priv, key_id, - &wxmic.tsc[0]); - - memset(&wrqu, 0, sizeof(wrqu)); - wrqu.data.length = sizeof(wxmic); - wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, - (char *) &wxmic); - - goto drop; - } - } - - /* Handle decapsulation - * In most cases, the firmware tell us about SNAP frames. - * For some reason, the SNAP frames sent by LinkSys APs - * are not properly recognised by most firmwares. - * So, check ourselves */ - if (length >= ENCAPS_OVERHEAD && - (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || - ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || - is_ethersnap(skb->data))) { - /* These indicate a SNAP within 802.2 LLC within - 802.11 frame which we'll need to de-encapsulate to - the original EthernetII frame. */ - hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD); - } else { - /* 802.3 frame - prepend 802.3 header as is */ - hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN); - hdr->h_proto = htons(length); - } - memcpy(hdr->h_dest, desc->addr1, ETH_ALEN); - if (fc & IEEE80211_FCTL_FROMDS) - memcpy(hdr->h_source, desc->addr3, ETH_ALEN); - else - memcpy(hdr->h_source, desc->addr2, ETH_ALEN); - - skb->protocol = eth_type_trans(skb, dev); - skb->ip_summed = CHECKSUM_NONE; - if (fc & IEEE80211_FCTL_TODS) - skb->pkt_type = PACKET_OTHERHOST; - - /* Process the wireless stats if needed */ - orinoco_stat_gather(dev, skb, desc); - - /* Pass the packet to the networking stack */ - netif_rx(skb); - stats->rx_packets++; - stats->rx_bytes += length; - - return; - - drop: - dev_kfree_skb(skb); - stats->rx_errors++; - stats->rx_dropped++; -} - -static void orinoco_rx_isr_tasklet(unsigned long data) -{ - struct net_device *dev = (struct net_device *) data; - struct orinoco_private *priv = netdev_priv(dev); - struct orinoco_rx_data *rx_data, *temp; - struct hermes_rx_descriptor *desc; - struct sk_buff *skb; - - /* extract desc and skb from queue */ - list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { - desc = rx_data->desc; - skb = rx_data->skb; - list_del(&rx_data->list); - kfree(rx_data); - - orinoco_rx(dev, desc, skb); - - kfree(desc); - } -} - -/********************************************************************/ -/* Rx path (info frames) */ -/********************************************************************/ - -static void print_linkstatus(struct net_device *dev, u16 status) -{ - char * s; - - if (suppress_linkstatus) - return; - - switch (status) { - case HERMES_LINKSTATUS_NOT_CONNECTED: - s = "Not Connected"; - break; - case HERMES_LINKSTATUS_CONNECTED: - s = "Connected"; - break; - case HERMES_LINKSTATUS_DISCONNECTED: - s = "Disconnected"; - break; - case HERMES_LINKSTATUS_AP_CHANGE: - s = "AP Changed"; - break; - case HERMES_LINKSTATUS_AP_OUT_OF_RANGE: - s = "AP Out of Range"; - break; - case HERMES_LINKSTATUS_AP_IN_RANGE: - s = "AP In Range"; - break; - case HERMES_LINKSTATUS_ASSOC_FAILED: - s = "Association Failed"; - break; - default: - s = "UNKNOWN"; - } - - printk(KERN_INFO "%s: New link status: %s (%04x)\n", - dev->name, s, status); -} - -/* Search scan results for requested BSSID, join it if found */ -static void orinoco_join_ap(struct work_struct *work) -{ - struct orinoco_private *priv = - container_of(work, struct orinoco_private, join_work); - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - int err; - unsigned long flags; - struct join_req { - u8 bssid[ETH_ALEN]; - __le16 channel; - } __attribute__ ((packed)) req; - const int atom_len = offsetof(struct prism2_scan_apinfo, atim); - struct prism2_scan_apinfo *atom = NULL; - int offset = 4; - int found = 0; - u8 *buf; - u16 len; - - /* Allocate buffer for scan results */ - buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL); - if (! buf) - return; - - if (orinoco_lock(priv, &flags) != 0) - goto fail_lock; - - /* Sanity checks in case user changed something in the meantime */ - if (! priv->bssid_fixed) - goto out; - - if (strlen(priv->desired_essid) == 0) - goto out; - - /* Read scan results from the firmware */ - err = hermes_read_ltv(hw, USER_BAP, - HERMES_RID_SCANRESULTSTABLE, - MAX_SCAN_LEN, &len, buf); - if (err) { - printk(KERN_ERR "%s: Cannot read scan results\n", - dev->name); - goto out; - } - - len = HERMES_RECLEN_TO_BYTES(len); - - /* Go through the scan results looking for the channel of the AP - * we were requested to join */ - for (; offset + atom_len <= len; offset += atom_len) { - atom = (struct prism2_scan_apinfo *) (buf + offset); - if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) { - found = 1; - break; - } - } - - if (! found) { - DEBUG(1, "%s: Requested AP not found in scan results\n", - dev->name); - goto out; - } - - memcpy(req.bssid, priv->desired_bssid, ETH_ALEN); - req.channel = atom->channel; /* both are little-endian */ - err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST, - &req); - if (err) - printk(KERN_ERR "%s: Error issuing join request\n", dev->name); - - out: - orinoco_unlock(priv, &flags); - - fail_lock: - kfree(buf); -} - -/* Send new BSSID to userspace */ -static void orinoco_send_bssid_wevent(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - union iwreq_data wrqu; - int err; - - err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID, - ETH_ALEN, NULL, wrqu.ap_addr.sa_data); - if (err != 0) - return; - - wrqu.ap_addr.sa_family = ARPHRD_ETHER; - - /* Send event to user space */ - wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); -} - -static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - union iwreq_data wrqu; - int err; - u8 buf[88]; - u8 *ie; - - if (!priv->has_wpa) - return; - - err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO, - sizeof(buf), NULL, &buf); - if (err != 0) - return; - - ie = orinoco_get_wpa_ie(buf, sizeof(buf)); - if (ie) { - int rem = sizeof(buf) - (ie - &buf[0]); - wrqu.data.length = ie[1] + 2; - if (wrqu.data.length > rem) - wrqu.data.length = rem; - - if (wrqu.data.length) - /* Send event to user space */ - wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie); - } -} - -static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv) -{ - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - union iwreq_data wrqu; - int err; - u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */ - u8 *ie; - - if (!priv->has_wpa) - return; - - err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_RESP_INFO, - sizeof(buf), NULL, &buf); - if (err != 0) - return; - - ie = orinoco_get_wpa_ie(buf, sizeof(buf)); - if (ie) { - int rem = sizeof(buf) - (ie - &buf[0]); - wrqu.data.length = ie[1] + 2; - if (wrqu.data.length > rem) - wrqu.data.length = rem; - - if (wrqu.data.length) - /* Send event to user space */ - wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie); - } -} - -static void orinoco_send_wevents(struct work_struct *work) -{ - struct orinoco_private *priv = - container_of(work, struct orinoco_private, wevent_work); - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return; - - orinoco_send_assocreqie_wevent(priv); - orinoco_send_assocrespie_wevent(priv); - orinoco_send_bssid_wevent(priv); - - orinoco_unlock(priv, &flags); -} - -static inline void orinoco_clear_scan_results(struct orinoco_private *priv, - unsigned long scan_age) -{ - if (priv->has_ext_scan) { - struct xbss_element *bss; - struct xbss_element *tmp_bss; - - /* Blow away current list of scan results */ - list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) { - if (!scan_age || - time_after(jiffies, bss->last_scanned + scan_age)) { - list_move_tail(&bss->list, - &priv->bss_free_list); - /* Don't blow away ->list, just BSS data */ - memset(&bss->bss, 0, sizeof(bss->bss)); - bss->last_scanned = 0; - } - } - } else { - struct bss_element *bss; - struct bss_element *tmp_bss; - - /* Blow away current list of scan results */ - list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) { - if (!scan_age || - time_after(jiffies, bss->last_scanned + scan_age)) { - list_move_tail(&bss->list, - &priv->bss_free_list); - /* Don't blow away ->list, just BSS data */ - memset(&bss->bss, 0, sizeof(bss->bss)); - bss->last_scanned = 0; - } - } - } -} - -static void orinoco_add_ext_scan_result(struct orinoco_private *priv, - struct agere_ext_scan_info *atom) -{ - struct xbss_element *bss = NULL; - int found = 0; - - /* Try to update an existing bss first */ - list_for_each_entry(bss, &priv->bss_list, list) { - if (compare_ether_addr(bss->bss.bssid, atom->bssid)) - continue; - /* ESSID lengths */ - if (bss->bss.data[1] != atom->data[1]) - continue; - if (memcmp(&bss->bss.data[2], &atom->data[2], - atom->data[1])) - continue; - found = 1; - break; - } - - /* Grab a bss off the free list */ - if (!found && !list_empty(&priv->bss_free_list)) { - bss = list_entry(priv->bss_free_list.next, - struct xbss_element, list); - list_del(priv->bss_free_list.next); - - list_add_tail(&bss->list, &priv->bss_list); - } - - if (bss) { - /* Always update the BSS to get latest beacon info */ - memcpy(&bss->bss, atom, sizeof(bss->bss)); - bss->last_scanned = jiffies; - } -} - -static int orinoco_process_scan_results(struct net_device *dev, - unsigned char *buf, - int len) -{ - struct orinoco_private *priv = netdev_priv(dev); - int offset; /* In the scan data */ - union hermes_scan_info *atom; - int atom_len; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - atom_len = sizeof(struct agere_scan_apinfo); - offset = 0; - break; - case FIRMWARE_TYPE_SYMBOL: - /* Lack of documentation necessitates this hack. - * Different firmwares have 68 or 76 byte long atoms. - * We try modulo first. If the length divides by both, - * we check what would be the channel in the second - * frame for a 68-byte atom. 76-byte atoms have 0 there. - * Valid channel cannot be 0. */ - if (len % 76) - atom_len = 68; - else if (len % 68) - atom_len = 76; - else if (len >= 1292 && buf[68] == 0) - atom_len = 76; - else - atom_len = 68; - offset = 0; - break; - case FIRMWARE_TYPE_INTERSIL: - offset = 4; - if (priv->has_hostscan) { - atom_len = le16_to_cpup((__le16 *)buf); - /* Sanity check for atom_len */ - if (atom_len < sizeof(struct prism2_scan_apinfo)) { - printk(KERN_ERR "%s: Invalid atom_len in scan " - "data: %d\n", dev->name, atom_len); - return -EIO; - } - } else - atom_len = offsetof(struct prism2_scan_apinfo, atim); - break; - default: - return -EOPNOTSUPP; - } - - /* Check that we got an whole number of atoms */ - if ((len - offset) % atom_len) { - printk(KERN_ERR "%s: Unexpected scan data length %d, " - "atom_len %d, offset %d\n", dev->name, len, - atom_len, offset); - return -EIO; - } - - orinoco_clear_scan_results(priv, msecs_to_jiffies(15000)); - - /* Read the entries one by one */ - for (; offset + atom_len <= len; offset += atom_len) { - int found = 0; - struct bss_element *bss = NULL; - - /* Get next atom */ - atom = (union hermes_scan_info *) (buf + offset); - - /* Try to update an existing bss first */ - list_for_each_entry(bss, &priv->bss_list, list) { - if (compare_ether_addr(bss->bss.a.bssid, atom->a.bssid)) - continue; - if (le16_to_cpu(bss->bss.a.essid_len) != - le16_to_cpu(atom->a.essid_len)) - continue; - if (memcmp(bss->bss.a.essid, atom->a.essid, - le16_to_cpu(atom->a.essid_len))) - continue; - found = 1; - break; - } - - /* Grab a bss off the free list */ - if (!found && !list_empty(&priv->bss_free_list)) { - bss = list_entry(priv->bss_free_list.next, - struct bss_element, list); - list_del(priv->bss_free_list.next); - - list_add_tail(&bss->list, &priv->bss_list); - } - - if (bss) { - /* Always update the BSS to get latest beacon info */ - memcpy(&bss->bss, atom, sizeof(bss->bss)); - bss->last_scanned = jiffies; - } - } - - return 0; -} - -static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) -{ - struct orinoco_private *priv = netdev_priv(dev); - u16 infofid; - struct { - __le16 len; - __le16 type; - } __attribute__ ((packed)) info; - int len, type; - int err; - - /* This is an answer to an INQUIRE command that we did earlier, - * or an information "event" generated by the card - * The controller return to us a pseudo frame containing - * the information in question - Jean II */ - infofid = hermes_read_regn(hw, INFOFID); - - /* Read the info frame header - don't try too hard */ - err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info), - infofid, 0); - if (err) { - printk(KERN_ERR "%s: error %d reading info frame. " - "Frame dropped.\n", dev->name, err); - return; - } - - len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len)); - type = le16_to_cpu(info.type); - - switch (type) { - case HERMES_INQ_TALLIES: { - struct hermes_tallies_frame tallies; - struct iw_statistics *wstats = &priv->wstats; - - if (len > sizeof(tallies)) { - printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", - dev->name, len); - len = sizeof(tallies); - } - - err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len, - infofid, sizeof(info)); - if (err) - break; - - /* Increment our various counters */ - /* wstats->discard.nwid - no wrong BSSID stuff */ - wstats->discard.code += - le16_to_cpu(tallies.RxWEPUndecryptable); - if (len == sizeof(tallies)) - wstats->discard.code += - le16_to_cpu(tallies.RxDiscards_WEPICVError) + - le16_to_cpu(tallies.RxDiscards_WEPExcluded); - wstats->discard.misc += - le16_to_cpu(tallies.TxDiscardsWrongSA); - wstats->discard.fragment += - le16_to_cpu(tallies.RxMsgInBadMsgFragments); - wstats->discard.retries += - le16_to_cpu(tallies.TxRetryLimitExceeded); - /* wstats->miss.beacon - no match */ - } - break; - case HERMES_INQ_LINKSTATUS: { - struct hermes_linkstatus linkstatus; - u16 newstatus; - int connected; - - if (priv->iw_mode == IW_MODE_MONITOR) - break; - - if (len != sizeof(linkstatus)) { - printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", - dev->name, len); - break; - } - - err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len, - infofid, sizeof(info)); - if (err) - break; - newstatus = le16_to_cpu(linkstatus.linkstatus); - - /* Symbol firmware uses "out of range" to signal that - * the hostscan frame can be requested. */ - if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE && - priv->firmware_type == FIRMWARE_TYPE_SYMBOL && - priv->has_hostscan && priv->scan_inprogress) { - hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL); - break; - } - - connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) - || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) - || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); - - if (connected) - netif_carrier_on(dev); - else if (!ignore_disconnect) - netif_carrier_off(dev); - - if (newstatus != priv->last_linkstatus) { - priv->last_linkstatus = newstatus; - print_linkstatus(dev, newstatus); - /* The info frame contains only one word which is the - * status (see hermes.h). The status is pretty boring - * in itself, that's why we export the new BSSID... - * Jean II */ - schedule_work(&priv->wevent_work); - } - } - break; - case HERMES_INQ_SCAN: - if (!priv->scan_inprogress && priv->bssid_fixed && - priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { - schedule_work(&priv->join_work); - break; - } - /* fall through */ - case HERMES_INQ_HOSTSCAN: - case HERMES_INQ_HOSTSCAN_SYMBOL: { - /* Result of a scanning. Contains information about - * cells in the vicinity - Jean II */ - union iwreq_data wrqu; - unsigned char *buf; - - /* Scan is no longer in progress */ - priv->scan_inprogress = 0; - - /* Sanity check */ - if (len > 4096) { - printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n", - dev->name, len); - break; - } - - /* Allocate buffer for results */ - buf = kmalloc(len, GFP_ATOMIC); - if (buf == NULL) - /* No memory, so can't printk()... */ - break; - - /* Read scan data */ - err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len, - infofid, sizeof(info)); - if (err) { - kfree(buf); - break; - } - -#ifdef ORINOCO_DEBUG - { - int i; - printk(KERN_DEBUG "Scan result [%02X", buf[0]); - for(i = 1; i < (len * 2); i++) - printk(":%02X", buf[i]); - printk("]\n"); - } -#endif /* ORINOCO_DEBUG */ - - if (orinoco_process_scan_results(dev, buf, len) == 0) { - /* Send an empty event to user space. - * We don't send the received data on the event because - * it would require us to do complex transcoding, and - * we want to minimise the work done in the irq handler - * Use a request to extract the data - Jean II */ - wrqu.data.length = 0; - wrqu.data.flags = 0; - wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); - } - kfree(buf); - } - break; - case HERMES_INQ_CHANNELINFO: - { - struct agere_ext_scan_info *bss; - - if (!priv->scan_inprogress) { - printk(KERN_DEBUG "%s: Got chaninfo without scan, " - "len=%d\n", dev->name, len); - break; - } - - /* An empty result indicates that the scan is complete */ - if (len == 0) { - union iwreq_data wrqu; - - /* Scan is no longer in progress */ - priv->scan_inprogress = 0; - - wrqu.data.length = 0; - wrqu.data.flags = 0; - wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); - break; - } - - /* Sanity check */ - else if (len > sizeof(*bss)) { - printk(KERN_WARNING - "%s: Ext scan results too large (%d bytes). " - "Truncating results to %zd bytes.\n", - dev->name, len, sizeof(*bss)); - len = sizeof(*bss); - } else if (len < (offsetof(struct agere_ext_scan_info, - data) + 2)) { - /* Drop this result now so we don't have to - * keep checking later */ - printk(KERN_WARNING - "%s: Ext scan results too short (%d bytes)\n", - dev->name, len); - break; - } - - bss = kmalloc(sizeof(*bss), GFP_ATOMIC); - if (bss == NULL) - break; - - /* Read scan data */ - err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len, - infofid, sizeof(info)); - if (err) { - kfree(bss); - break; - } - - orinoco_add_ext_scan_result(priv, bss); - - kfree(bss); - break; - } - case HERMES_INQ_SEC_STAT_AGERE: - /* Security status (Agere specific) */ - /* Ignore this frame for now */ - if (priv->firmware_type == FIRMWARE_TYPE_AGERE) - break; - /* fall through */ - default: - printk(KERN_DEBUG "%s: Unknown information frame received: " - "type 0x%04x, length %d\n", dev->name, type, len); - /* We don't actually do anything about it */ - break; - } -} - -static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw) -{ - if (net_ratelimit()) - printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); -} - -/********************************************************************/ -/* Internal hardware control routines */ -/********************************************************************/ - -int __orinoco_up(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct hermes *hw = &priv->hw; - int err; - - netif_carrier_off(dev); /* just to make sure */ - - err = __orinoco_program_rids(dev); - if (err) { - printk(KERN_ERR "%s: Error %d configuring card\n", - dev->name, err); - return err; - } - - /* Fire things up again */ - hermes_set_irqmask(hw, ORINOCO_INTEN); - err = hermes_enable_port(hw, 0); - if (err) { - printk(KERN_ERR "%s: Error %d enabling MAC port\n", - dev->name, err); - return err; - } - - netif_start_queue(dev); - - return 0; -} - -int __orinoco_down(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct hermes *hw = &priv->hw; - int err; - - netif_stop_queue(dev); - - if (! priv->hw_unavailable) { - if (! priv->broken_disableport) { - err = hermes_disable_port(hw, 0); - if (err) { - /* Some firmwares (e.g. Intersil 1.3.x) seem - * to have problems disabling the port, oh - * well, too bad. */ - printk(KERN_WARNING "%s: Error %d disabling MAC port\n", - dev->name, err); - priv->broken_disableport = 1; - } - } - hermes_set_irqmask(hw, 0); - hermes_write_regn(hw, EVACK, 0xffff); - } - - /* firmware will have to reassociate */ - netif_carrier_off(dev); - priv->last_linkstatus = 0xffff; - - return 0; -} - -static int orinoco_allocate_fid(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct hermes *hw = &priv->hw; - int err; - - err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { - /* Try workaround for old Symbol firmware bug */ - printk(KERN_WARNING "%s: firmware ALLOC bug detected " - "(old Symbol firmware?). Trying to work around... ", - dev->name); - - priv->nicbuf_size = TX_NICBUF_SIZE_BUG; - err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err) - printk("failed!\n"); - else - printk("ok.\n"); - } - - return err; -} - -int orinoco_reinit_firmware(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct hermes *hw = &priv->hw; - int err; - - err = hermes_init(hw); - if (priv->do_fw_download && !err) { - err = orinoco_download(priv); - if (err) - priv->do_fw_download = 0; - } - if (!err) - err = orinoco_allocate_fid(dev); - - return err; -} - -static int __orinoco_hw_set_bitrate(struct orinoco_private *priv) -{ - hermes_t *hw = &priv->hw; - int err = 0; - - if (priv->bitratemode >= BITRATE_TABLE_SIZE) { - printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", - priv->ndev->name, priv->bitratemode); - return -EINVAL; - } - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFTXRATECONTROL, - bitrate_table[priv->bitratemode].agere_txratectrl); - break; - case FIRMWARE_TYPE_INTERSIL: - case FIRMWARE_TYPE_SYMBOL: - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFTXRATECONTROL, - bitrate_table[priv->bitratemode].intersil_txratectrl); - break; - default: - BUG(); - } - - return err; -} - -/* Set fixed AP address */ -static int __orinoco_hw_set_wap(struct orinoco_private *priv) -{ - int roaming_flag; - int err = 0; - hermes_t *hw = &priv->hw; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - /* not supported */ - break; - case FIRMWARE_TYPE_INTERSIL: - if (priv->bssid_fixed) - roaming_flag = 2; - else - roaming_flag = 1; - - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFROAMINGMODE, - roaming_flag); - break; - case FIRMWARE_TYPE_SYMBOL: - err = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFMANDATORYBSSID_SYMBOL, - &priv->desired_bssid); - break; - } - return err; -} - -/* Change the WEP keys and/or the current keys. Can be called - * either from __orinoco_hw_setup_enc() or directly from - * orinoco_ioctl_setiwencode(). In the later case the association - * with the AP is not broken (if the firmware can handle it), - * which is needed for 802.1x implementations. */ -static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) -{ - hermes_t *hw = &priv->hw; - int err = 0; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - err = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFWEPKEYS_AGERE, - &priv->keys); - if (err) - return err; - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFTXKEY_AGERE, - priv->tx_key); - if (err) - return err; - break; - case FIRMWARE_TYPE_INTERSIL: - case FIRMWARE_TYPE_SYMBOL: - { - int keylen; - int i; - - /* Force uniform key length to work around firmware bugs */ - keylen = le16_to_cpu(priv->keys[priv->tx_key].len); - - if (keylen > LARGE_KEY_SIZE) { - printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", - priv->ndev->name, priv->tx_key, keylen); - return -E2BIG; - } - - /* Write all 4 keys */ - for(i = 0; i < ORINOCO_MAX_KEYS; i++) { - err = hermes_write_ltv(hw, USER_BAP, - HERMES_RID_CNFDEFAULTKEY0 + i, - HERMES_BYTES_TO_RECLEN(keylen), - priv->keys[i].data); - if (err) - return err; - } - - /* Write the index of the key used in transmission */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFWEPDEFAULTKEYID, - priv->tx_key); - if (err) - return err; - } - break; - } - - return 0; -} - -static int __orinoco_hw_setup_enc(struct orinoco_private *priv) -{ - hermes_t *hw = &priv->hw; - int err = 0; - int master_wep_flag; - int auth_flag; - int enc_flag; - - /* Setup WEP keys for WEP and WPA */ - if (priv->encode_alg) - __orinoco_hw_setup_wepkeys(priv); - - if (priv->wep_restrict) - auth_flag = HERMES_AUTH_SHARED_KEY; - else - auth_flag = HERMES_AUTH_OPEN; - - if (priv->wpa_enabled) - enc_flag = 2; - else if (priv->encode_alg == IW_ENCODE_ALG_WEP) - enc_flag = 1; - else - enc_flag = 0; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ - if (priv->encode_alg == IW_ENCODE_ALG_WEP) { - /* Enable the shared-key authentication. */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFAUTHENTICATION_AGERE, - auth_flag); - } - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFWEPENABLED_AGERE, - enc_flag); - if (err) - return err; - - if (priv->has_wpa) { - /* Set WPA key management */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE, - priv->key_mgmt); - if (err) - return err; - } - - break; - - case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ - case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ - if (priv->encode_alg == IW_ENCODE_ALG_WEP) { - if (priv->wep_restrict || - (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) - master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | - HERMES_WEP_EXCL_UNENCRYPTED; - else - master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; - - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFAUTHENTICATION, - auth_flag); - if (err) - return err; - } else - master_wep_flag = 0; - - if (priv->iw_mode == IW_MODE_MONITOR) - master_wep_flag |= HERMES_WEP_HOST_DECRYPT; - - /* Master WEP setting : on/off */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFWEPFLAGS_INTERSIL, - master_wep_flag); - if (err) - return err; - - break; - } - - return 0; -} - -/* key must be 32 bytes, including the tx and rx MIC keys. - * rsc must be 8 bytes - * tsc must be 8 bytes or NULL - */ -static int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx, - u8 *key, u8 *rsc, u8 *tsc) -{ - struct { - __le16 idx; - u8 rsc[IW_ENCODE_SEQ_MAX_SIZE]; - u8 key[TKIP_KEYLEN]; - u8 tx_mic[MIC_KEYLEN]; - u8 rx_mic[MIC_KEYLEN]; - u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; - } __attribute__ ((packed)) buf; - int ret; - int err; - int k; - u16 xmitting; - - key_idx &= 0x3; - - if (set_tx) - key_idx |= 0x8000; - - buf.idx = cpu_to_le16(key_idx); - memcpy(buf.key, key, - sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic)); - - if (rsc == NULL) - memset(buf.rsc, 0, sizeof(buf.rsc)); - else - memcpy(buf.rsc, rsc, sizeof(buf.rsc)); - - if (tsc == NULL) { - memset(buf.tsc, 0, sizeof(buf.tsc)); - buf.tsc[4] = 0x10; - } else { - memcpy(buf.tsc, tsc, sizeof(buf.tsc)); - } - - /* Wait upto 100ms for tx queue to empty */ - k = 100; - do { - k--; - udelay(1000); - ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, - &xmitting); - if (ret) - break; - } while ((k > 0) && xmitting); - - if (k == 0) - ret = -ETIMEDOUT; - - err = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE, - &buf); - - return ret ? ret : err; -} - -static int orinoco_clear_tkip_key(struct orinoco_private *priv, - int key_idx) -{ - hermes_t *hw = &priv->hw; - int err; - - memset(&priv->tkip_key[key_idx], 0, sizeof(priv->tkip_key[key_idx])); - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE, - key_idx); - if (err) - printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n", - priv->ndev->name, err, key_idx); - return err; -} - -static int __orinoco_program_rids(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err; - struct hermes_idstring idbuf; - - /* Set the MAC address */ - err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, - HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr); - if (err) { - printk(KERN_ERR "%s: Error %d setting MAC address\n", - dev->name, err); - return err; - } - - /* Set up the link mode */ - err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, - priv->port_type); - if (err) { - printk(KERN_ERR "%s: Error %d setting port type\n", - dev->name, err); - return err; - } - /* Set the channel/frequency */ - if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFOWNCHANNEL, - priv->channel); - if (err) { - printk(KERN_ERR "%s: Error %d setting channel %d\n", - dev->name, err, priv->channel); - return err; - } - } - - if (priv->has_ibss) { - u16 createibss; - - if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { - printk(KERN_WARNING "%s: This firmware requires an " - "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); - /* With wvlan_cs, in this case, we would crash. - * hopefully, this driver will behave better... - * Jean II */ - createibss = 0; - } else { - createibss = priv->createibss; - } - - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFCREATEIBSS, - createibss); - if (err) { - printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", - dev->name, err); - return err; - } - } - - /* Set the desired BSSID */ - err = __orinoco_hw_set_wap(priv); - if (err) { - printk(KERN_ERR "%s: Error %d setting AP address\n", - dev->name, err); - return err; - } - /* Set the desired ESSID */ - idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); - memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); - /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ - err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, - HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), - &idbuf); - if (err) { - printk(KERN_ERR "%s: Error %d setting OWNSSID\n", - dev->name, err); - return err; - } - err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, - HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), - &idbuf); - if (err) { - printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", - dev->name, err); - return err; - } - - /* Set the station name */ - idbuf.len = cpu_to_le16(strlen(priv->nick)); - memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); - err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, - HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2), - &idbuf); - if (err) { - printk(KERN_ERR "%s: Error %d setting nickname\n", - dev->name, err); - return err; - } - - /* Set AP density */ - if (priv->has_sensitivity) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFSYSTEMSCALE, - priv->ap_density); - if (err) { - printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " - "Disabling sensitivity control\n", - dev->name, err); - - priv->has_sensitivity = 0; - } - } - - /* Set RTS threshold */ - err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, - priv->rts_thresh); - if (err) { - printk(KERN_ERR "%s: Error %d setting RTS threshold\n", - dev->name, err); - return err; - } - - /* Set fragmentation threshold or MWO robustness */ - if (priv->has_mwo) - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFMWOROBUST_AGERE, - priv->mwo_robust); - else - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, - priv->frag_thresh); - if (err) { - printk(KERN_ERR "%s: Error %d setting fragmentation\n", - dev->name, err); - return err; - } - - /* Set bitrate */ - err = __orinoco_hw_set_bitrate(priv); - if (err) { - printk(KERN_ERR "%s: Error %d setting bitrate\n", - dev->name, err); - return err; - } - - /* Set power management */ - if (priv->has_pm) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFPMENABLED, - priv->pm_on); - if (err) { - printk(KERN_ERR "%s: Error %d setting up PM\n", - dev->name, err); - return err; - } - - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFMULTICASTRECEIVE, - priv->pm_mcast); - if (err) { - printk(KERN_ERR "%s: Error %d setting up PM\n", - dev->name, err); - return err; - } - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFMAXSLEEPDURATION, - priv->pm_period); - if (err) { - printk(KERN_ERR "%s: Error %d setting up PM\n", - dev->name, err); - return err; - } - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFPMHOLDOVERDURATION, - priv->pm_timeout); - if (err) { - printk(KERN_ERR "%s: Error %d setting up PM\n", - dev->name, err); - return err; - } - } - - /* Set preamble - only for Symbol so far... */ - if (priv->has_preamble) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFPREAMBLE_SYMBOL, - priv->preamble); - if (err) { - printk(KERN_ERR "%s: Error %d setting preamble\n", - dev->name, err); - return err; - } - } - - /* Set up encryption */ - if (priv->has_wep || priv->has_wpa) { - err = __orinoco_hw_setup_enc(priv); - if (err) { - printk(KERN_ERR "%s: Error %d activating encryption\n", - dev->name, err); - return err; - } - } - - if (priv->iw_mode == IW_MODE_MONITOR) { - /* Enable monitor mode */ - dev->type = ARPHRD_IEEE80211; - err = hermes_docmd_wait(hw, HERMES_CMD_TEST | - HERMES_TEST_MONITOR, 0, NULL); - } else { - /* Disable monitor mode */ - dev->type = ARPHRD_ETHER; - err = hermes_docmd_wait(hw, HERMES_CMD_TEST | - HERMES_TEST_STOP, 0, NULL); - } - if (err) - return err; - - /* Set promiscuity / multicast*/ - priv->promiscuous = 0; - priv->mc_count = 0; - - /* FIXME: what about netif_tx_lock */ - __orinoco_set_multicast_list(dev); - - return 0; -} - -/* FIXME: return int? */ -static void -__orinoco_set_multicast_list(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err = 0; - int promisc, mc_count; - - /* The Hermes doesn't seem to have an allmulti mode, so we go - * into promiscuous mode and let the upper levels deal. */ - if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || - (dev->mc_count > MAX_MULTICAST(priv)) ) { - promisc = 1; - mc_count = 0; - } else { - promisc = 0; - mc_count = dev->mc_count; - } - - if (promisc != priv->promiscuous) { - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFPROMISCUOUSMODE, - promisc); - if (err) { - printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", - dev->name, err); - } else - priv->promiscuous = promisc; - } - - /* If we're not in promiscuous mode, then we need to set the - * group address if either we want to multicast, or if we were - * multicasting and want to stop */ - if (! promisc && (mc_count || priv->mc_count) ) { - struct dev_mc_list *p = dev->mc_list; - struct hermes_multicast mclist; - int i; - - for (i = 0; i < mc_count; i++) { - /* paranoia: is list shorter than mc_count? */ - BUG_ON(! p); - /* paranoia: bad address size in list? */ - BUG_ON(p->dmi_addrlen != ETH_ALEN); - - memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN); - p = p->next; - } - - if (p) - printk(KERN_WARNING "%s: Multicast list is " - "longer than mc_count\n", dev->name); - - err = hermes_write_ltv(hw, USER_BAP, - HERMES_RID_CNFGROUPADDRESSES, - HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN), - &mclist); - if (err) - printk(KERN_ERR "%s: Error %d setting multicast list.\n", - dev->name, err); - else - priv->mc_count = mc_count; - } -} - -/* This must be called from user context, without locks held - use - * schedule_work() */ -static void orinoco_reset(struct work_struct *work) -{ - struct orinoco_private *priv = - container_of(work, struct orinoco_private, reset_work); - struct net_device *dev = priv->ndev; - struct hermes *hw = &priv->hw; - int err; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - /* When the hardware becomes available again, whatever - * detects that is responsible for re-initializing - * it. So no need for anything further */ - return; - - netif_stop_queue(dev); - - /* Shut off interrupts. Depending on what state the hardware - * is in, this might not work, but we'll try anyway */ - hermes_set_irqmask(hw, 0); - hermes_write_regn(hw, EVACK, 0xffff); - - priv->hw_unavailable++; - priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */ - netif_carrier_off(dev); - - orinoco_unlock(priv, &flags); - - /* Scanning support: Cleanup of driver struct */ - orinoco_clear_scan_results(priv, 0); - priv->scan_inprogress = 0; - - if (priv->hard_reset) { - err = (*priv->hard_reset)(priv); - if (err) { - printk(KERN_ERR "%s: orinoco_reset: Error %d " - "performing hard reset\n", dev->name, err); - goto disable; - } - } - - err = orinoco_reinit_firmware(dev); - if (err) { - printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", - dev->name, err); - goto disable; - } - - spin_lock_irq(&priv->lock); /* This has to be called from user context */ - - priv->hw_unavailable--; - - /* priv->open or priv->hw_unavailable might have changed while - * we dropped the lock */ - if (priv->open && (! priv->hw_unavailable)) { - err = __orinoco_up(dev); - if (err) { - printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", - dev->name, err); - } else - dev->trans_start = jiffies; - } - - spin_unlock_irq(&priv->lock); - - return; - disable: - hermes_set_irqmask(hw, 0); - netif_device_detach(dev); - printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); -} - -/********************************************************************/ -/* Interrupt handler */ -/********************************************************************/ - -static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw) -{ - printk(KERN_DEBUG "%s: TICK\n", dev->name); -} - -static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw) -{ - /* This seems to happen a fair bit under load, but ignoring it - seems to work fine...*/ - printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", - dev->name); -} - -irqreturn_t orinoco_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int count = MAX_IRQLOOPS_PER_IRQ; - u16 evstat, events; - /* These are used to detect a runaway interrupt situation */ - /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy, - * we panic and shut down the hardware */ - static int last_irq_jiffy = 0; /* jiffies value the last time - * we were called */ - static int loops_this_jiffy = 0; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) { - /* If hw is unavailable - we don't know if the irq was - * for us or not */ - return IRQ_HANDLED; - } - - evstat = hermes_read_regn(hw, EVSTAT); - events = evstat & hw->inten; - if (! events) { - orinoco_unlock(priv, &flags); - return IRQ_NONE; - } - - if (jiffies != last_irq_jiffy) - loops_this_jiffy = 0; - last_irq_jiffy = jiffies; - - while (events && count--) { - if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) { - printk(KERN_WARNING "%s: IRQ handler is looping too " - "much! Resetting.\n", dev->name); - /* Disable interrupts for now */ - hermes_set_irqmask(hw, 0); - schedule_work(&priv->reset_work); - break; - } - - /* Check the card hasn't been removed */ - if (! hermes_present(hw)) { - DEBUG(0, "orinoco_interrupt(): card removed\n"); - break; - } - - if (events & HERMES_EV_TICK) - __orinoco_ev_tick(dev, hw); - if (events & HERMES_EV_WTERR) - __orinoco_ev_wterr(dev, hw); - if (events & HERMES_EV_INFDROP) - __orinoco_ev_infdrop(dev, hw); - if (events & HERMES_EV_INFO) - __orinoco_ev_info(dev, hw); - if (events & HERMES_EV_RX) - __orinoco_ev_rx(dev, hw); - if (events & HERMES_EV_TXEXC) - __orinoco_ev_txexc(dev, hw); - if (events & HERMES_EV_TX) - __orinoco_ev_tx(dev, hw); - if (events & HERMES_EV_ALLOC) - __orinoco_ev_alloc(dev, hw); - - hermes_write_regn(hw, EVACK, evstat); - - evstat = hermes_read_regn(hw, EVSTAT); - events = evstat & hw->inten; - }; - - orinoco_unlock(priv, &flags); - return IRQ_HANDLED; -} - -/********************************************************************/ -/* Initialization */ -/********************************************************************/ - -struct comp_id { - u16 id, variant, major, minor; -} __attribute__ ((packed)); - -static inline fwtype_t determine_firmware_type(struct comp_id *nic_id) -{ - if (nic_id->id < 0x8000) - return FIRMWARE_TYPE_AGERE; - else if (nic_id->id == 0x8000 && nic_id->major == 0) - return FIRMWARE_TYPE_SYMBOL; - else - return FIRMWARE_TYPE_INTERSIL; -} - -/* Set priv->firmware type, determine firmware properties */ -static int determine_firmware(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err; - struct comp_id nic_id, sta_id; - unsigned int firmver; - char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2))); - - /* Get the hardware version */ - err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); - if (err) { - printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n", - dev->name, err); - return err; - } - - le16_to_cpus(&nic_id.id); - le16_to_cpus(&nic_id.variant); - le16_to_cpus(&nic_id.major); - le16_to_cpus(&nic_id.minor); - printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n", - dev->name, nic_id.id, nic_id.variant, - nic_id.major, nic_id.minor); - - priv->firmware_type = determine_firmware_type(&nic_id); - - /* Get the firmware version */ - err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id); - if (err) { - printk(KERN_ERR "%s: Cannot read station identity: error %d\n", - dev->name, err); - return err; - } - - le16_to_cpus(&sta_id.id); - le16_to_cpus(&sta_id.variant); - le16_to_cpus(&sta_id.major); - le16_to_cpus(&sta_id.minor); - printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n", - dev->name, sta_id.id, sta_id.variant, - sta_id.major, sta_id.minor); - - switch (sta_id.id) { - case 0x15: - printk(KERN_ERR "%s: Primary firmware is active\n", - dev->name); - return -ENODEV; - case 0x14b: - printk(KERN_ERR "%s: Tertiary firmware is active\n", - dev->name); - return -ENODEV; - case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */ - case 0x21: /* Symbol Spectrum24 Trilogy */ - break; - default: - printk(KERN_NOTICE "%s: Unknown station ID, please report\n", - dev->name); - break; - } - - /* Default capabilities */ - priv->has_sensitivity = 1; - priv->has_mwo = 0; - priv->has_preamble = 0; - priv->has_port3 = 1; - priv->has_ibss = 1; - priv->has_wep = 0; - priv->has_big_wep = 0; - priv->has_alt_txcntl = 0; - priv->has_ext_scan = 0; - priv->has_wpa = 0; - priv->do_fw_download = 0; - - /* Determine capabilities from the firmware version */ - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: - /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, - ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ - snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, - "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor); - - firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; - - priv->has_ibss = (firmver >= 0x60006); - priv->has_wep = (firmver >= 0x40020); - priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell - Gold cards from the others? */ - priv->has_mwo = (firmver >= 0x60000); - priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ - priv->ibss_port = 1; - priv->has_hostscan = (firmver >= 0x8000a); - priv->do_fw_download = 1; - priv->broken_monitor = (firmver >= 0x80000); - priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */ - priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */ - priv->has_wpa = (firmver >= 0x9002a); - /* Tested with Agere firmware : - * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II - * Tested CableTron firmware : 4.32 => Anton */ - break; - case FIRMWARE_TYPE_SYMBOL: - /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ - /* Intel MAC : 00:02:B3:* */ - /* 3Com MAC : 00:50:DA:* */ - memset(tmp, 0, sizeof(tmp)); - /* Get the Symbol firmware version */ - err = hermes_read_ltv(hw, USER_BAP, - HERMES_RID_SECONDARYVERSION_SYMBOL, - SYMBOL_MAX_VER_LEN, NULL, &tmp); - if (err) { - printk(KERN_WARNING - "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n", - dev->name, err); - firmver = 0; - tmp[0] = '\0'; - } else { - /* The firmware revision is a string, the format is - * something like : "V2.20-01". - * Quick and dirty parsing... - Jean II - */ - firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12) - | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4) - | (tmp[7] - '0'); - - tmp[SYMBOL_MAX_VER_LEN] = '\0'; - } - - snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, - "Symbol %s", tmp); - - priv->has_ibss = (firmver >= 0x20000); - priv->has_wep = (firmver >= 0x15012); - priv->has_big_wep = (firmver >= 0x20000); - priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || - (firmver >= 0x29000 && firmver < 0x30000) || - firmver >= 0x31000; - priv->has_preamble = (firmver >= 0x20000); - priv->ibss_port = 4; - - /* Symbol firmware is found on various cards, but - * there has been no attempt to check firmware - * download on non-spectrum_cs based cards. - * - * Given that the Agere firmware download works - * differently, we should avoid doing a firmware - * download with the Symbol algorithm on non-spectrum - * cards. - * - * For now we can identify a spectrum_cs based card - * because it has a firmware reset function. - */ - priv->do_fw_download = (priv->stop_fw != NULL); - - priv->broken_disableport = (firmver == 0x25013) || - (firmver >= 0x30000 && firmver <= 0x31000); - priv->has_hostscan = (firmver >= 0x31001) || - (firmver >= 0x29057 && firmver < 0x30000); - /* Tested with Intel firmware : 0x20015 => Jean II */ - /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ - break; - case FIRMWARE_TYPE_INTERSIL: - /* D-Link, Linksys, Adtron, ZoomAir, and many others... - * Samsung, Compaq 100/200 and Proxim are slightly - * different and less well tested */ - /* D-Link MAC : 00:40:05:* */ - /* Addtron MAC : 00:90:D1:* */ - snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, - "Intersil %d.%d.%d", sta_id.major, sta_id.minor, - sta_id.variant); - - firmver = ((unsigned long)sta_id.major << 16) | - ((unsigned long)sta_id.minor << 8) | sta_id.variant; - - priv->has_ibss = (firmver >= 0x000700); /* FIXME */ - priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); - priv->has_pm = (firmver >= 0x000700); - priv->has_hostscan = (firmver >= 0x010301); - - if (firmver >= 0x000800) - priv->ibss_port = 0; - else { - printk(KERN_NOTICE "%s: Intersil firmware earlier " - "than v0.8.x - several features not supported\n", - dev->name); - priv->ibss_port = 1; - } - break; - } - printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name, - priv->fw_name); - - return 0; -} - -static int orinoco_init(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err = 0; - struct hermes_idstring nickbuf; - u16 reclen; - int len; - - /* No need to lock, the hw_unavailable flag is already set in - * alloc_orinocodev() */ - priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN; - - /* Initialize the firmware */ - err = hermes_init(hw); - if (err != 0) { - printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n", - dev->name, err); - goto out; - } - - err = determine_firmware(dev); - if (err != 0) { - printk(KERN_ERR "%s: Incompatible firmware, aborting\n", - dev->name); - goto out; - } - - if (priv->do_fw_download) { - err = orinoco_download(priv); - if (err) - priv->do_fw_download = 0; - - /* Check firmware version again */ - err = determine_firmware(dev); - if (err != 0) { - printk(KERN_ERR "%s: Incompatible firmware, aborting\n", - dev->name); - goto out; - } - } - - if (priv->has_port3) - printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name); - if (priv->has_ibss) - printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n", - dev->name); - if (priv->has_wep) { - printk(KERN_DEBUG "%s: WEP supported, ", dev->name); - if (priv->has_big_wep) - printk("104-bit key\n"); - else - printk("40-bit key\n"); - } - if (priv->has_wpa) { - printk(KERN_DEBUG "%s: WPA-PSK supported\n", dev->name); - if (orinoco_mic_init(priv)) { - printk(KERN_ERR "%s: Failed to setup MIC crypto " - "algorithm. Disabling WPA support\n", dev->name); - priv->has_wpa = 0; - } - } - - /* Now we have the firmware capabilities, allocate appropiate - * sized scan buffers */ - if (orinoco_bss_data_allocate(priv)) - goto out; - orinoco_bss_data_init(priv); - - /* Get the MAC address */ - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, - ETH_ALEN, NULL, dev->dev_addr); - if (err) { - printk(KERN_WARNING "%s: failed to read MAC address!\n", - dev->name); - goto out; - } - - printk(KERN_DEBUG "%s: MAC address %pM\n", - dev->name, dev->dev_addr); - - /* Get the station name */ - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, - sizeof(nickbuf), &reclen, &nickbuf); - if (err) { - printk(KERN_ERR "%s: failed to read station name\n", - dev->name); - goto out; - } - if (nickbuf.len) - len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); - else - len = min(IW_ESSID_MAX_SIZE, 2 * reclen); - memcpy(priv->nick, &nickbuf.val, len); - priv->nick[len] = '\0'; - - printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick); - - err = orinoco_allocate_fid(dev); - if (err) { - printk(KERN_ERR "%s: failed to allocate NIC buffer!\n", - dev->name); - goto out; - } - - /* Get allowed channels */ - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST, - &priv->channel_mask); - if (err) { - printk(KERN_ERR "%s: failed to read channel list!\n", - dev->name); - goto out; - } - - /* Get initial AP density */ - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, - &priv->ap_density); - if (err || priv->ap_density < 1 || priv->ap_density > 3) { - priv->has_sensitivity = 0; - } - - /* Get initial RTS threshold */ - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, - &priv->rts_thresh); - if (err) { - printk(KERN_ERR "%s: failed to read RTS threshold!\n", - dev->name); - goto out; - } - - /* Get initial fragmentation settings */ - if (priv->has_mwo) - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFMWOROBUST_AGERE, - &priv->mwo_robust); - else - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, - &priv->frag_thresh); - if (err) { - printk(KERN_ERR "%s: failed to read fragmentation settings!\n", - dev->name); - goto out; - } - - /* Power management setup */ - if (priv->has_pm) { - priv->pm_on = 0; - priv->pm_mcast = 1; - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFMAXSLEEPDURATION, - &priv->pm_period); - if (err) { - printk(KERN_ERR "%s: failed to read power management period!\n", - dev->name); - goto out; - } - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFPMHOLDOVERDURATION, - &priv->pm_timeout); - if (err) { - printk(KERN_ERR "%s: failed to read power management timeout!\n", - dev->name); - goto out; - } - } - - /* Preamble setup */ - if (priv->has_preamble) { - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFPREAMBLE_SYMBOL, - &priv->preamble); - if (err) - goto out; - } - - /* Set up the default configuration */ - priv->iw_mode = IW_MODE_INFRA; - /* By default use IEEE/IBSS ad-hoc mode if we have it */ - priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss); - set_port_type(priv); - priv->channel = 0; /* use firmware default */ - - priv->promiscuous = 0; - priv->encode_alg = IW_ENCODE_ALG_NONE; - priv->tx_key = 0; - priv->wpa_enabled = 0; - priv->tkip_cm_active = 0; - priv->key_mgmt = 0; - priv->wpa_ie_len = 0; - priv->wpa_ie = NULL; - - /* Make the hardware available, as long as it hasn't been - * removed elsewhere (e.g. by PCMCIA hot unplug) */ - spin_lock_irq(&priv->lock); - priv->hw_unavailable--; - spin_unlock_irq(&priv->lock); - - printk(KERN_DEBUG "%s: ready\n", dev->name); - - out: - return err; -} - -struct net_device -*alloc_orinocodev(int sizeof_card, - struct device *device, - int (*hard_reset)(struct orinoco_private *), - int (*stop_fw)(struct orinoco_private *, int)) -{ - struct net_device *dev; - struct orinoco_private *priv; - - dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card); - if (! dev) - return NULL; - priv = netdev_priv(dev); - priv->ndev = dev; - if (sizeof_card) - priv->card = (void *)((unsigned long)priv - + sizeof(struct orinoco_private)); - else - priv->card = NULL; - priv->dev = device; - - /* Setup / override net_device fields */ - dev->init = orinoco_init; - dev->hard_start_xmit = orinoco_xmit; - dev->tx_timeout = orinoco_tx_timeout; - dev->watchdog_timeo = HZ; /* 1 second timeout */ - dev->get_stats = orinoco_get_stats; - dev->ethtool_ops = &orinoco_ethtool_ops; - dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def; -#ifdef WIRELESS_SPY - priv->wireless_data.spy_data = &priv->spy_data; - dev->wireless_data = &priv->wireless_data; -#endif - dev->change_mtu = orinoco_change_mtu; - dev->set_multicast_list = orinoco_set_multicast_list; - /* we use the default eth_mac_addr for setting the MAC addr */ - - /* Reserve space in skb for the SNAP header */ - dev->hard_header_len += ENCAPS_OVERHEAD; - - /* Set up default callbacks */ - dev->open = orinoco_open; - dev->stop = orinoco_stop; - priv->hard_reset = hard_reset; - priv->stop_fw = stop_fw; - - spin_lock_init(&priv->lock); - priv->open = 0; - priv->hw_unavailable = 1; /* orinoco_init() must clear this - * before anything else touches the - * hardware */ - INIT_WORK(&priv->reset_work, orinoco_reset); - INIT_WORK(&priv->join_work, orinoco_join_ap); - INIT_WORK(&priv->wevent_work, orinoco_send_wevents); - - INIT_LIST_HEAD(&priv->rx_list); - tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet, - (unsigned long) dev); - - netif_carrier_off(dev); - priv->last_linkstatus = 0xffff; - - priv->cached_fw = NULL; - - return dev; -} - -void free_orinocodev(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - - /* No need to empty priv->rx_list: if the tasklet is scheduled - * when we call tasklet_kill it will run one final time, - * emptying the list */ - tasklet_kill(&priv->rx_tasklet); - if (priv->cached_fw) - release_firmware(priv->cached_fw); - priv->cached_fw = NULL; - priv->wpa_ie_len = 0; - kfree(priv->wpa_ie); - orinoco_mic_free(priv); - orinoco_bss_data_free(priv); - free_netdev(dev); -} - -/********************************************************************/ -/* Wireless extensions */ -/********************************************************************/ - -/* Return : < 0 -> error code ; >= 0 -> length */ -static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, - char buf[IW_ESSID_MAX_SIZE+1]) -{ - hermes_t *hw = &priv->hw; - int err = 0; - struct hermes_idstring essidbuf; - char *p = (char *)(&essidbuf.val); - int len; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (strlen(priv->desired_essid) > 0) { - /* We read the desired SSID from the hardware rather - than from priv->desired_essid, just in case the - firmware is allowed to change it on us. I'm not - sure about this */ - /* My guess is that the OWNSSID should always be whatever - * we set to the card, whereas CURRENT_SSID is the one that - * may change... - Jean II */ - u16 rid; - - *active = 1; - - rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : - HERMES_RID_CNFDESIREDSSID; - - err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), - NULL, &essidbuf); - if (err) - goto fail_unlock; - } else { - *active = 0; - - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, - sizeof(essidbuf), NULL, &essidbuf); - if (err) - goto fail_unlock; - } - - len = le16_to_cpu(essidbuf.len); - BUG_ON(len > IW_ESSID_MAX_SIZE); - - memset(buf, 0, IW_ESSID_MAX_SIZE); - memcpy(buf, p, len); - err = len; - - fail_unlock: - orinoco_unlock(priv, &flags); - - return err; -} - -static long orinoco_hw_get_freq(struct orinoco_private *priv) -{ - - hermes_t *hw = &priv->hw; - int err = 0; - u16 channel; - long freq = 0; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel); - if (err) - goto out; - - /* Intersil firmware 1.3.5 returns 0 when the interface is down */ - if (channel == 0) { - err = -EBUSY; - goto out; - } - - if ( (channel < 1) || (channel > NUM_CHANNELS) ) { - printk(KERN_WARNING "%s: Channel out of range (%d)!\n", - priv->ndev->name, channel); - err = -EBUSY; - goto out; - - } - freq = channel_frequency[channel-1] * 100000; - - out: - orinoco_unlock(priv, &flags); - - if (err > 0) - err = -EBUSY; - return err ? err : freq; -} - -static int orinoco_hw_get_bitratelist(struct orinoco_private *priv, - int *numrates, s32 *rates, int max) -{ - hermes_t *hw = &priv->hw; - struct hermes_idstring list; - unsigned char *p = (unsigned char *)&list.val; - int err = 0; - int num; - int i; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, - sizeof(list), NULL, &list); - orinoco_unlock(priv, &flags); - - if (err) - return err; - - num = le16_to_cpu(list.len); - *numrates = num; - num = min(num, max); - - for (i = 0; i < num; i++) { - rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ - } - - return 0; -} - -static int orinoco_ioctl_getname(struct net_device *dev, - struct iw_request_info *info, - char *name, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int numrates; - int err; - - err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0); - - if (!err && (numrates > 2)) - strcpy(name, "IEEE 802.11b"); - else - strcpy(name, "IEEE 802.11-DS"); - - return 0; -} - -static int orinoco_ioctl_setwap(struct net_device *dev, - struct iw_request_info *info, - struct sockaddr *ap_addr, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = -EINPROGRESS; /* Call commit handler */ - unsigned long flags; - static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - static const u8 any_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* Enable automatic roaming - no sanity checks are needed */ - if (memcmp(&ap_addr->sa_data, off_addr, ETH_ALEN) == 0 || - memcmp(&ap_addr->sa_data, any_addr, ETH_ALEN) == 0) { - priv->bssid_fixed = 0; - memset(priv->desired_bssid, 0, ETH_ALEN); - - /* "off" means keep existing connection */ - if (ap_addr->sa_data[0] == 0) { - __orinoco_hw_set_wap(priv); - err = 0; - } - goto out; - } - - if (priv->firmware_type == FIRMWARE_TYPE_AGERE) { - printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't " - "support manual roaming\n", - dev->name); - err = -EOPNOTSUPP; - goto out; - } - - if (priv->iw_mode != IW_MODE_INFRA) { - printk(KERN_WARNING "%s: Manual roaming supported only in " - "managed mode\n", dev->name); - err = -EOPNOTSUPP; - goto out; - } - - /* Intersil firmware hangs without Desired ESSID */ - if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL && - strlen(priv->desired_essid) == 0) { - printk(KERN_WARNING "%s: Desired ESSID must be set for " - "manual roaming\n", dev->name); - err = -EOPNOTSUPP; - goto out; - } - - /* Finally, enable manual roaming */ - priv->bssid_fixed = 1; - memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN); - - out: - orinoco_unlock(priv, &flags); - return err; -} - -static int orinoco_ioctl_getwap(struct net_device *dev, - struct iw_request_info *info, - struct sockaddr *ap_addr, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - - hermes_t *hw = &priv->hw; - int err = 0; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - ap_addr->sa_family = ARPHRD_ETHER; - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, - ETH_ALEN, NULL, ap_addr->sa_data); - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_setmode(struct net_device *dev, - struct iw_request_info *info, - u32 *mode, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = -EINPROGRESS; /* Call commit handler */ - unsigned long flags; - - if (priv->iw_mode == *mode) - return 0; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (*mode) { - case IW_MODE_ADHOC: - if (!priv->has_ibss && !priv->has_port3) - err = -EOPNOTSUPP; - break; - - case IW_MODE_INFRA: - break; - - case IW_MODE_MONITOR: - if (priv->broken_monitor && !force_monitor) { - printk(KERN_WARNING "%s: Monitor mode support is " - "buggy in this firmware, not enabling\n", - dev->name); - err = -EOPNOTSUPP; - } - break; - - default: - err = -EOPNOTSUPP; - break; - } - - if (err == -EINPROGRESS) { - priv->iw_mode = *mode; - set_port_type(priv); - } - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getmode(struct net_device *dev, - struct iw_request_info *info, - u32 *mode, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - - *mode = priv->iw_mode; - return 0; -} - -static int orinoco_ioctl_getiwrange(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *rrq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = 0; - struct iw_range *range = (struct iw_range *) extra; - int numrates; - int i, k; - - rrq->length = sizeof(struct iw_range); - memset(range, 0, sizeof(struct iw_range)); - - range->we_version_compiled = WIRELESS_EXT; - range->we_version_source = 22; - - /* Set available channels/frequencies */ - range->num_channels = NUM_CHANNELS; - k = 0; - for (i = 0; i < NUM_CHANNELS; i++) { - if (priv->channel_mask & (1 << i)) { - range->freq[k].i = i + 1; - range->freq[k].m = channel_frequency[i] * 100000; - range->freq[k].e = 1; - k++; - } - - if (k >= IW_MAX_FREQUENCIES) - break; - } - range->num_frequency = k; - range->sensitivity = 3; - - if (priv->has_wep) { - range->max_encoding_tokens = ORINOCO_MAX_KEYS; - range->encoding_size[0] = SMALL_KEY_SIZE; - range->num_encoding_sizes = 1; - - if (priv->has_big_wep) { - range->encoding_size[1] = LARGE_KEY_SIZE; - range->num_encoding_sizes = 2; - } - } - - if (priv->has_wpa) - range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_CIPHER_TKIP; - - if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){ - /* Quality stats meaningless in ad-hoc mode */ - } else { - range->max_qual.qual = 0x8b - 0x2f; - range->max_qual.level = 0x2f - 0x95 - 1; - range->max_qual.noise = 0x2f - 0x95 - 1; - /* Need to get better values */ - range->avg_qual.qual = 0x24; - range->avg_qual.level = 0xC2; - range->avg_qual.noise = 0x9E; - } - - err = orinoco_hw_get_bitratelist(priv, &numrates, - range->bitrate, IW_MAX_BITRATES); - if (err) - return err; - range->num_bitrates = numrates; - - /* Set an indication of the max TCP throughput in bit/s that we can - * expect using this interface. May be use for QoS stuff... - * Jean II */ - if (numrates > 2) - range->throughput = 5 * 1000 * 1000; /* ~5 Mb/s */ - else - range->throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */ - - range->min_rts = 0; - range->max_rts = 2347; - range->min_frag = 256; - range->max_frag = 2346; - - range->min_pmp = 0; - range->max_pmp = 65535000; - range->min_pmt = 0; - range->max_pmt = 65535 * 1000; /* ??? */ - range->pmp_flags = IW_POWER_PERIOD; - range->pmt_flags = IW_POWER_TIMEOUT; - range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R; - - range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; - range->retry_flags = IW_RETRY_LIMIT; - range->r_time_flags = IW_RETRY_LIFETIME; - range->min_retry = 0; - range->max_retry = 65535; /* ??? */ - range->min_r_time = 0; - range->max_r_time = 65535 * 1000; /* ??? */ - - if (priv->firmware_type == FIRMWARE_TYPE_AGERE) - range->scan_capa = IW_SCAN_CAPA_ESSID; - else - range->scan_capa = IW_SCAN_CAPA_NONE; - - /* Event capability (kernel) */ - IW_EVENT_CAPA_SET_KERNEL(range->event_capa); - /* Event capability (driver) */ - IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY); - IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP); - IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN); - IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP); - - return 0; -} - -static int orinoco_ioctl_setiwencode(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *erq, - char *keybuf) -{ - struct orinoco_private *priv = netdev_priv(dev); - int index = (erq->flags & IW_ENCODE_INDEX) - 1; - int setindex = priv->tx_key; - int encode_alg = priv->encode_alg; - int restricted = priv->wep_restrict; - u16 xlen = 0; - int err = -EINPROGRESS; /* Call commit handler */ - unsigned long flags; - - if (! priv->has_wep) - return -EOPNOTSUPP; - - if (erq->pointer) { - /* We actually have a key to set - check its length */ - if (erq->length > LARGE_KEY_SIZE) - return -E2BIG; - - if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep ) - return -E2BIG; - } - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* Clear any TKIP key we have */ - if ((priv->has_wpa) && (priv->encode_alg == IW_ENCODE_ALG_TKIP)) - (void) orinoco_clear_tkip_key(priv, setindex); - - if (erq->length > 0) { - if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) - index = priv->tx_key; - - /* Adjust key length to a supported value */ - if (erq->length > SMALL_KEY_SIZE) { - xlen = LARGE_KEY_SIZE; - } else if (erq->length > 0) { - xlen = SMALL_KEY_SIZE; - } else - xlen = 0; - - /* Switch on WEP if off */ - if ((encode_alg != IW_ENCODE_ALG_WEP) && (xlen > 0)) { - setindex = index; - encode_alg = IW_ENCODE_ALG_WEP; - } - } else { - /* Important note : if the user do "iwconfig eth0 enc off", - * we will arrive there with an index of -1. This is valid - * but need to be taken care off... Jean II */ - if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) { - if((index != -1) || (erq->flags == 0)) { - err = -EINVAL; - goto out; - } - } else { - /* Set the index : Check that the key is valid */ - if(priv->keys[index].len == 0) { - err = -EINVAL; - goto out; - } - setindex = index; - } - } - - if (erq->flags & IW_ENCODE_DISABLED) - encode_alg = IW_ENCODE_ALG_NONE; - if (erq->flags & IW_ENCODE_OPEN) - restricted = 0; - if (erq->flags & IW_ENCODE_RESTRICTED) - restricted = 1; - - if (erq->pointer && erq->length > 0) { - priv->keys[index].len = cpu_to_le16(xlen); - memset(priv->keys[index].data, 0, - sizeof(priv->keys[index].data)); - memcpy(priv->keys[index].data, keybuf, erq->length); - } - priv->tx_key = setindex; - - /* Try fast key change if connected and only keys are changed */ - if ((priv->encode_alg == encode_alg) && - (priv->wep_restrict == restricted) && - netif_carrier_ok(dev)) { - err = __orinoco_hw_setup_wepkeys(priv); - /* No need to commit if successful */ - goto out; - } - - priv->encode_alg = encode_alg; - priv->wep_restrict = restricted; - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getiwencode(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *erq, - char *keybuf) -{ - struct orinoco_private *priv = netdev_priv(dev); - int index = (erq->flags & IW_ENCODE_INDEX) - 1; - u16 xlen = 0; - unsigned long flags; - - if (! priv->has_wep) - return -EOPNOTSUPP; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) - index = priv->tx_key; - - erq->flags = 0; - if (!priv->encode_alg) - erq->flags |= IW_ENCODE_DISABLED; - erq->flags |= index + 1; - - if (priv->wep_restrict) - erq->flags |= IW_ENCODE_RESTRICTED; - else - erq->flags |= IW_ENCODE_OPEN; - - xlen = le16_to_cpu(priv->keys[index].len); - - erq->length = xlen; - - memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE); - - orinoco_unlock(priv, &flags); - return 0; -} - -static int orinoco_ioctl_setessid(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *erq, - char *essidbuf) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - - /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it - * anyway... - Jean II */ - - /* Hum... Should not use Wireless Extension constant (may change), - * should use our own... - Jean II */ - if (erq->length > IW_ESSID_MAX_SIZE) - return -E2BIG; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */ - memset(priv->desired_essid, 0, sizeof(priv->desired_essid)); - - /* If not ANY, get the new ESSID */ - if (erq->flags) { - memcpy(priv->desired_essid, essidbuf, erq->length); - } - - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_getessid(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *erq, - char *essidbuf) -{ - struct orinoco_private *priv = netdev_priv(dev); - int active; - int err = 0; - unsigned long flags; - - if (netif_running(dev)) { - err = orinoco_hw_get_essid(priv, &active, essidbuf); - if (err < 0) - return err; - erq->length = err; - } else { - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE); - erq->length = strlen(priv->desired_essid); - orinoco_unlock(priv, &flags); - } - - erq->flags = 1; - - return 0; -} - -static int orinoco_ioctl_setnick(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *nrq, - char *nickbuf) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - - if (nrq->length > IW_ESSID_MAX_SIZE) - return -E2BIG; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - memset(priv->nick, 0, sizeof(priv->nick)); - memcpy(priv->nick, nickbuf, nrq->length); - - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_getnick(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *nrq, - char *nickbuf) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE); - orinoco_unlock(priv, &flags); - - nrq->length = strlen(priv->nick); - - return 0; -} - -static int orinoco_ioctl_setfreq(struct net_device *dev, - struct iw_request_info *info, - struct iw_freq *frq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int chan = -1; - unsigned long flags; - int err = -EINPROGRESS; /* Call commit handler */ - - /* In infrastructure mode the AP sets the channel */ - if (priv->iw_mode == IW_MODE_INFRA) - return -EBUSY; - - if ( (frq->e == 0) && (frq->m <= 1000) ) { - /* Setting by channel number */ - chan = frq->m; - } else { - /* Setting by frequency - search the table */ - int mult = 1; - int i; - - for (i = 0; i < (6 - frq->e); i++) - mult *= 10; - - for (i = 0; i < NUM_CHANNELS; i++) - if (frq->m == (channel_frequency[i] * mult)) - chan = i+1; - } - - if ( (chan < 1) || (chan > NUM_CHANNELS) || - ! (priv->channel_mask & (1 << (chan-1)) ) ) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - priv->channel = chan; - if (priv->iw_mode == IW_MODE_MONITOR) { - /* Fast channel change - no commit if successful */ - hermes_t *hw = &priv->hw; - err = hermes_docmd_wait(hw, HERMES_CMD_TEST | - HERMES_TEST_SET_CHANNEL, - chan, NULL); - } - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getfreq(struct net_device *dev, - struct iw_request_info *info, - struct iw_freq *frq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int tmp; - - /* Locking done in there */ - tmp = orinoco_hw_get_freq(priv); - if (tmp < 0) { - return tmp; - } - - frq->m = tmp; - frq->e = 1; - - return 0; -} - -static int orinoco_ioctl_getsens(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *srq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - u16 val; - int err; - unsigned long flags; - - if (!priv->has_sensitivity) - return -EOPNOTSUPP; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFSYSTEMSCALE, &val); - orinoco_unlock(priv, &flags); - - if (err) - return err; - - srq->value = val; - srq->fixed = 0; /* auto */ - - return 0; -} - -static int orinoco_ioctl_setsens(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *srq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int val = srq->value; - unsigned long flags; - - if (!priv->has_sensitivity) - return -EOPNOTSUPP; - - if ((val < 1) || (val > 3)) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - priv->ap_density = val; - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_setrts(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rrq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int val = rrq->value; - unsigned long flags; - - if (rrq->disabled) - val = 2347; - - if ( (val < 0) || (val > 2347) ) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - priv->rts_thresh = val; - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_getrts(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rrq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - - rrq->value = priv->rts_thresh; - rrq->disabled = (rrq->value == 2347); - rrq->fixed = 1; - - return 0; -} - -static int orinoco_ioctl_setfrag(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *frq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = -EINPROGRESS; /* Call commit handler */ - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (priv->has_mwo) { - if (frq->disabled) - priv->mwo_robust = 0; - else { - if (frq->fixed) - printk(KERN_WARNING "%s: Fixed fragmentation is " - "not supported on this firmware. " - "Using MWO robust instead.\n", dev->name); - priv->mwo_robust = 1; - } - } else { - if (frq->disabled) - priv->frag_thresh = 2346; - else { - if ( (frq->value < 256) || (frq->value > 2346) ) - err = -EINVAL; - else - priv->frag_thresh = frq->value & ~0x1; /* must be even */ - } - } - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getfrag(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *frq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err; - u16 val; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (priv->has_mwo) { - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFMWOROBUST_AGERE, - &val); - if (err) - val = 0; - - frq->value = val ? 2347 : 0; - frq->disabled = ! val; - frq->fixed = 0; - } else { - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, - &val); - if (err) - val = 0; - - frq->value = val; - frq->disabled = (val >= 2346); - frq->fixed = 1; - } - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_setrate(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rrq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int ratemode = -1; - int bitrate; /* 100s of kilobits */ - int i; - unsigned long flags; - - /* As the user space doesn't know our highest rate, it uses -1 - * to ask us to set the highest rate. Test it using "iwconfig - * ethX rate auto" - Jean II */ - if (rrq->value == -1) - bitrate = 110; - else { - if (rrq->value % 100000) - return -EINVAL; - bitrate = rrq->value / 100000; - } - - if ( (bitrate != 10) && (bitrate != 20) && - (bitrate != 55) && (bitrate != 110) ) - return -EINVAL; - - for (i = 0; i < BITRATE_TABLE_SIZE; i++) - if ( (bitrate_table[i].bitrate == bitrate) && - (bitrate_table[i].automatic == ! rrq->fixed) ) { - ratemode = i; - break; - } - - if (ratemode == -1) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - priv->bitratemode = ratemode; - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; -} - -static int orinoco_ioctl_getrate(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rrq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err = 0; - int ratemode; - int i; - u16 val; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - ratemode = priv->bitratemode; - - BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); - - rrq->value = bitrate_table[ratemode].bitrate * 100000; - rrq->fixed = ! bitrate_table[ratemode].automatic; - rrq->disabled = 0; - - /* If the interface is running we try to find more about the - current mode */ - if (netif_running(dev)) { - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CURRENTTXRATE, &val); - if (err) - goto out; - - switch (priv->firmware_type) { - case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ - /* Note : in Lucent firmware, the return value of - * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, - * and therefore is totally different from the - * encoding of HERMES_RID_CNFTXRATECONTROL. - * Don't forget that 6Mb/s is really 5.5Mb/s */ - if (val == 6) - rrq->value = 5500000; - else - rrq->value = val * 1000000; - break; - case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ - case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ - for (i = 0; i < BITRATE_TABLE_SIZE; i++) - if (bitrate_table[i].intersil_txratectrl == val) { - ratemode = i; - break; - } - if (i >= BITRATE_TABLE_SIZE) - printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", - dev->name, val); - - rrq->value = bitrate_table[ratemode].bitrate * 100000; - break; - default: - BUG(); - } - } - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_setpower(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *prq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = -EINPROGRESS; /* Call commit handler */ - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (prq->disabled) { - priv->pm_on = 0; - } else { - switch (prq->flags & IW_POWER_MODE) { - case IW_POWER_UNICAST_R: - priv->pm_mcast = 0; - priv->pm_on = 1; - break; - case IW_POWER_ALL_R: - priv->pm_mcast = 1; - priv->pm_on = 1; - break; - case IW_POWER_ON: - /* No flags : but we may have a value - Jean II */ - break; - default: - err = -EINVAL; - goto out; - } - - if (prq->flags & IW_POWER_TIMEOUT) { - priv->pm_on = 1; - priv->pm_timeout = prq->value / 1000; - } - if (prq->flags & IW_POWER_PERIOD) { - priv->pm_on = 1; - priv->pm_period = prq->value / 1000; - } - /* It's valid to not have a value if we are just toggling - * the flags... Jean II */ - if(!priv->pm_on) { - err = -EINVAL; - goto out; - } - } - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getpower(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *prq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err = 0; - u16 enable, period, timeout, mcast; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable); - if (err) - goto out; - - err = hermes_read_wordrec(hw, USER_BAP, - HERMES_RID_CNFMAXSLEEPDURATION, &period); - if (err) - goto out; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout); - if (err) - goto out; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast); - if (err) - goto out; - - prq->disabled = !enable; - /* Note : by default, display the period */ - if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { - prq->flags = IW_POWER_TIMEOUT; - prq->value = timeout * 1000; - } else { - prq->flags = IW_POWER_PERIOD; - prq->value = period * 1000; - } - if (mcast) - prq->flags |= IW_POWER_ALL_R; - else - prq->flags |= IW_POWER_UNICAST_R; - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_set_encodeext(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct iw_point *encoding = &wrqu->encoding; - struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; - int idx, alg = ext->alg, set_key = 1; - unsigned long flags; - int err = -EINVAL; - u16 key_len; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* Determine and validate the key index */ - idx = encoding->flags & IW_ENCODE_INDEX; - if (idx) { - if ((idx < 1) || (idx > 4)) - goto out; - idx--; - } else - idx = priv->tx_key; - - if (encoding->flags & IW_ENCODE_DISABLED) - alg = IW_ENCODE_ALG_NONE; - - if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) { - /* Clear any TKIP TX key we had */ - (void) orinoco_clear_tkip_key(priv, priv->tx_key); - } - - if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { - priv->tx_key = idx; - set_key = ((alg == IW_ENCODE_ALG_TKIP) || - (ext->key_len > 0)) ? 1 : 0; - } - - if (set_key) { - /* Set the requested key first */ - switch (alg) { - case IW_ENCODE_ALG_NONE: - priv->encode_alg = alg; - priv->keys[idx].len = 0; - break; - - case IW_ENCODE_ALG_WEP: - if (ext->key_len > SMALL_KEY_SIZE) - key_len = LARGE_KEY_SIZE; - else if (ext->key_len > 0) - key_len = SMALL_KEY_SIZE; - else - goto out; - - priv->encode_alg = alg; - priv->keys[idx].len = cpu_to_le16(key_len); - - key_len = min(ext->key_len, key_len); - - memset(priv->keys[idx].data, 0, ORINOCO_MAX_KEY_SIZE); - memcpy(priv->keys[idx].data, ext->key, key_len); - break; - - case IW_ENCODE_ALG_TKIP: - { - hermes_t *hw = &priv->hw; - u8 *tkip_iv = NULL; - - if (!priv->has_wpa || - (ext->key_len > sizeof(priv->tkip_key[0]))) - goto out; - - priv->encode_alg = alg; - memset(&priv->tkip_key[idx], 0, - sizeof(priv->tkip_key[idx])); - memcpy(&priv->tkip_key[idx], ext->key, ext->key_len); - - if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) - tkip_iv = &ext->rx_seq[0]; - - err = __orinoco_hw_set_tkip_key(hw, idx, - ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY, - (u8 *) &priv->tkip_key[idx], - tkip_iv, NULL); - if (err) - printk(KERN_ERR "%s: Error %d setting TKIP key" - "\n", dev->name, err); - - goto out; - } - default: - goto out; - } - } - err = -EINPROGRESS; - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_get_encodeext(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct iw_point *encoding = &wrqu->encoding; - struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; - int idx, max_key_len; - unsigned long flags; - int err; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = -EINVAL; - max_key_len = encoding->length - sizeof(*ext); - if (max_key_len < 0) - goto out; - - idx = encoding->flags & IW_ENCODE_INDEX; - if (idx) { - if ((idx < 1) || (idx > 4)) - goto out; - idx--; - } else - idx = priv->tx_key; - - encoding->flags = idx + 1; - memset(ext, 0, sizeof(*ext)); - - ext->alg = priv->encode_alg; - switch (priv->encode_alg) { - case IW_ENCODE_ALG_NONE: - ext->key_len = 0; - encoding->flags |= IW_ENCODE_DISABLED; - break; - case IW_ENCODE_ALG_WEP: - ext->key_len = min_t(u16, le16_to_cpu(priv->keys[idx].len), - max_key_len); - memcpy(ext->key, priv->keys[idx].data, ext->key_len); - encoding->flags |= IW_ENCODE_ENABLED; - break; - case IW_ENCODE_ALG_TKIP: - ext->key_len = min_t(u16, sizeof(struct orinoco_tkip_key), - max_key_len); - memcpy(ext->key, &priv->tkip_key[idx], ext->key_len); - encoding->flags |= IW_ENCODE_ENABLED; - break; - } - - err = 0; - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_set_auth(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - struct iw_param *param = &wrqu->param; - unsigned long flags; - int ret = -EINPROGRESS; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (param->flags & IW_AUTH_INDEX) { - case IW_AUTH_WPA_VERSION: - case IW_AUTH_CIPHER_PAIRWISE: - case IW_AUTH_CIPHER_GROUP: - case IW_AUTH_RX_UNENCRYPTED_EAPOL: - case IW_AUTH_PRIVACY_INVOKED: - case IW_AUTH_DROP_UNENCRYPTED: - /* - * orinoco does not use these parameters - */ - break; - - case IW_AUTH_KEY_MGMT: - /* wl_lkm implies value 2 == PSK for Hermes I - * which ties in with WEXT - * no other hints tho :( - */ - priv->key_mgmt = param->value; - break; - - case IW_AUTH_TKIP_COUNTERMEASURES: - /* When countermeasures are enabled, shut down the - * card; when disabled, re-enable the card. This must - * take effect immediately. - * - * TODO: Make sure that the EAPOL message is getting - * out before card disabled - */ - if (param->value) { - priv->tkip_cm_active = 1; - ret = hermes_enable_port(hw, 0); - } else { - priv->tkip_cm_active = 0; - ret = hermes_disable_port(hw, 0); - } - break; - - case IW_AUTH_80211_AUTH_ALG: - if (param->value & IW_AUTH_ALG_SHARED_KEY) - priv->wep_restrict = 1; - else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) - priv->wep_restrict = 0; - else - ret = -EINVAL; - break; - - case IW_AUTH_WPA_ENABLED: - if (priv->has_wpa) { - priv->wpa_enabled = param->value ? 1 : 0; - } else { - if (param->value) - ret = -EOPNOTSUPP; - /* else silently accept disable of WPA */ - priv->wpa_enabled = 0; - } - break; - - default: - ret = -EOPNOTSUPP; - } - - orinoco_unlock(priv, &flags); - return ret; -} - -static int orinoco_ioctl_get_auth(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct iw_param *param = &wrqu->param; - unsigned long flags; - int ret = 0; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (param->flags & IW_AUTH_INDEX) { - case IW_AUTH_KEY_MGMT: - param->value = priv->key_mgmt; - break; - - case IW_AUTH_TKIP_COUNTERMEASURES: - param->value = priv->tkip_cm_active; - break; - - case IW_AUTH_80211_AUTH_ALG: - if (priv->wep_restrict) - param->value = IW_AUTH_ALG_SHARED_KEY; - else - param->value = IW_AUTH_ALG_OPEN_SYSTEM; - break; - - case IW_AUTH_WPA_ENABLED: - param->value = priv->wpa_enabled; - break; - - default: - ret = -EOPNOTSUPP; - } - - orinoco_unlock(priv, &flags); - return ret; -} - -static int orinoco_ioctl_set_genie(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - u8 *buf; - unsigned long flags; - int err = 0; - - /* cut off at IEEE80211_MAX_DATA_LEN */ - if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) || - (wrqu->data.length && (extra == NULL))) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (wrqu->data.length) { - buf = kmalloc(wrqu->data.length, GFP_KERNEL); - if (buf == NULL) { - err = -ENOMEM; - goto out; - } - - memcpy(buf, extra, wrqu->data.length); - kfree(priv->wpa_ie); - priv->wpa_ie = buf; - priv->wpa_ie_len = wrqu->data.length; - } else { - kfree(priv->wpa_ie); - priv->wpa_ie = NULL; - priv->wpa_ie_len = 0; - } - - if (priv->wpa_ie) { - /* Looks like wl_lkm wants to check the auth alg, and - * somehow pass it to the firmware. - * Instead it just calls the key mgmt rid - * - we do this in set auth. - */ - } - -out: - orinoco_unlock(priv, &flags); - return err; -} - -static int orinoco_ioctl_get_genie(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - int err = 0; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) { - wrqu->data.length = 0; - goto out; - } - - if (wrqu->data.length < priv->wpa_ie_len) { - err = -E2BIG; - goto out; - } - - wrqu->data.length = priv->wpa_ie_len; - memcpy(extra, priv->wpa_ie, priv->wpa_ie_len); - -out: - orinoco_unlock(priv, &flags); - return err; -} - -static int orinoco_ioctl_set_mlme(struct net_device *dev, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - struct iw_mlme *mlme = (struct iw_mlme *)extra; - unsigned long flags; - int ret = 0; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (mlme->cmd) { - case IW_MLME_DEAUTH: - /* silently ignore */ - break; - - case IW_MLME_DISASSOC: - { - struct { - u8 addr[ETH_ALEN]; - __le16 reason_code; - } __attribute__ ((packed)) buf; - - memcpy(buf.addr, mlme->addr.sa_data, ETH_ALEN); - buf.reason_code = cpu_to_le16(mlme->reason_code); - ret = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFDISASSOCIATE, - &buf); - break; - } - default: - ret = -EOPNOTSUPP; - } - - orinoco_unlock(priv, &flags); - return ret; -} - -static int orinoco_ioctl_getretry(struct net_device *dev, - struct iw_request_info *info, - struct iw_param *rrq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int err = 0; - u16 short_limit, long_limit, lifetime; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT, - &short_limit); - if (err) - goto out; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT, - &long_limit); - if (err) - goto out; - - err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME, - &lifetime); - if (err) - goto out; - - rrq->disabled = 0; /* Can't be disabled */ - - /* Note : by default, display the retry number */ - if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { - rrq->flags = IW_RETRY_LIFETIME; - rrq->value = lifetime * 1000; /* ??? */ - } else { - /* By default, display the min number */ - if ((rrq->flags & IW_RETRY_LONG)) { - rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; - rrq->value = long_limit; - } else { - rrq->flags = IW_RETRY_LIMIT; - rrq->value = short_limit; - if(short_limit != long_limit) - rrq->flags |= IW_RETRY_SHORT; - } - } - - out: - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_reset(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - - if (! capable(CAP_NET_ADMIN)) - return -EPERM; - - if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) { - printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name); - - /* Firmware reset */ - orinoco_reset(&priv->reset_work); - } else { - printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); - - schedule_work(&priv->reset_work); - } - - return 0; -} - -static int orinoco_ioctl_setibssport(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) - -{ - struct orinoco_private *priv = netdev_priv(dev); - int val = *( (int *) extra ); - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - priv->ibss_port = val ; - - /* Actually update the mode we are using */ - set_port_type(priv); - - orinoco_unlock(priv, &flags); - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_getibssport(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int *val = (int *) extra; - - *val = priv->ibss_port; - return 0; -} - -static int orinoco_ioctl_setport3(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int val = *( (int *) extra ); - int err = 0; - unsigned long flags; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - switch (val) { - case 0: /* Try to do IEEE ad-hoc mode */ - if (! priv->has_ibss) { - err = -EINVAL; - break; - } - priv->prefer_port3 = 0; - - break; - - case 1: /* Try to do Lucent proprietary ad-hoc mode */ - if (! priv->has_port3) { - err = -EINVAL; - break; - } - priv->prefer_port3 = 1; - break; - - default: - err = -EINVAL; - } - - if (! err) { - /* Actually update the mode we are using */ - set_port_type(priv); - err = -EINPROGRESS; - } - - orinoco_unlock(priv, &flags); - - return err; -} - -static int orinoco_ioctl_getport3(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int *val = (int *) extra; - - *val = priv->prefer_port3; - return 0; -} - -static int orinoco_ioctl_setpreamble(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - int val; - - if (! priv->has_preamble) - return -EOPNOTSUPP; - - /* 802.11b has recently defined some short preamble. - * Basically, the Phy header has been reduced in size. - * This increase performance, especially at high rates - * (the preamble is transmitted at 1Mb/s), unfortunately - * this give compatibility troubles... - Jean II */ - val = *( (int *) extra ); - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (val) - priv->preamble = 1; - else - priv->preamble = 0; - - orinoco_unlock(priv, &flags); - - return -EINPROGRESS; /* Call commit handler */ -} - -static int orinoco_ioctl_getpreamble(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int *val = (int *) extra; - - if (! priv->has_preamble) - return -EOPNOTSUPP; - - *val = priv->preamble; - return 0; -} - -/* ioctl interface to hermes_read_ltv() - * To use with iwpriv, pass the RID as the token argument, e.g. - * iwpriv get_rid [0xfc00] - * At least Wireless Tools 25 is required to use iwpriv. - * For Wireless Tools 25 and 26 append "dummy" are the end. */ -static int orinoco_ioctl_getrid(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *data, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - int rid = data->flags; - u16 length; - int err; - unsigned long flags; - - /* It's a "get" function, but we don't want users to access the - * WEP key and other raw firmware data */ - if (! capable(CAP_NET_ADMIN)) - return -EPERM; - - if (rid < 0xfc00 || rid > 0xffff) - return -EINVAL; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length, - extra); - if (err) - goto out; - - data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length), - MAX_RID_LEN); - - out: - orinoco_unlock(priv, &flags); - return err; -} - -/* Trigger a scan (look for other cells in the vicinity) */ -static int orinoco_ioctl_setscan(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *srq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - struct iw_scan_req *si = (struct iw_scan_req *) extra; - int err = 0; - unsigned long flags; - - /* Note : you may have realised that, as this is a SET operation, - * this is privileged and therefore a normal user can't - * perform scanning. - * This is not an error, while the device perform scanning, - * traffic doesn't flow, so it's a perfect DoS... - * Jean II */ - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - /* Scanning with port 0 disabled would fail */ - if (!netif_running(dev)) { - err = -ENETDOWN; - goto out; - } - - /* In monitor mode, the scan results are always empty. - * Probe responses are passed to the driver as received - * frames and could be processed in software. */ - if (priv->iw_mode == IW_MODE_MONITOR) { - err = -EOPNOTSUPP; - goto out; - } - - /* Note : because we don't lock out the irq handler, the way - * we access scan variables in priv is critical. - * o scan_inprogress : not touched by irq handler - * o scan_mode : not touched by irq handler - * Before modifying anything on those variables, please think hard ! - * Jean II */ - - /* Save flags */ - priv->scan_mode = srq->flags; - - /* Always trigger scanning, even if it's in progress. - * This way, if the info frame get lost, we will recover somewhat - * gracefully - Jean II */ - - if (priv->has_hostscan) { - switch (priv->firmware_type) { - case FIRMWARE_TYPE_SYMBOL: - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFHOSTSCAN_SYMBOL, - HERMES_HOSTSCAN_SYMBOL_ONCE | - HERMES_HOSTSCAN_SYMBOL_BCAST); - break; - case FIRMWARE_TYPE_INTERSIL: { - __le16 req[3]; - - req[0] = cpu_to_le16(0x3fff); /* All channels */ - req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ - req[2] = 0; /* Any ESSID */ - err = HERMES_WRITE_RECORD(hw, USER_BAP, - HERMES_RID_CNFHOSTSCAN, &req); - } - break; - case FIRMWARE_TYPE_AGERE: - if (priv->scan_mode & IW_SCAN_THIS_ESSID) { - struct hermes_idstring idbuf; - size_t len = min(sizeof(idbuf.val), - (size_t) si->essid_len); - idbuf.len = cpu_to_le16(len); - memcpy(idbuf.val, si->essid, len); - - err = hermes_write_ltv(hw, USER_BAP, - HERMES_RID_CNFSCANSSID_AGERE, - HERMES_BYTES_TO_RECLEN(len + 2), - &idbuf); - } else - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFSCANSSID_AGERE, - 0); /* Any ESSID */ - if (err) - break; - - if (priv->has_ext_scan) { - /* Clear scan results at the start of - * an extended scan */ - orinoco_clear_scan_results(priv, - msecs_to_jiffies(15000)); - - /* TODO: Is this available on older firmware? - * Can we use it to scan specific channels - * for IW_SCAN_THIS_FREQ? */ - err = hermes_write_wordrec(hw, USER_BAP, - HERMES_RID_CNFSCANCHANNELS2GHZ, - 0x7FFF); - if (err) - goto out; - - err = hermes_inquire(hw, - HERMES_INQ_CHANNELINFO); - } else - err = hermes_inquire(hw, HERMES_INQ_SCAN); - break; - } - } else - err = hermes_inquire(hw, HERMES_INQ_SCAN); - - /* One more client */ - if (! err) - priv->scan_inprogress = 1; - - out: - orinoco_unlock(priv, &flags); - return err; -} - -#define MAX_CUSTOM_LEN 64 - -/* Translate scan data returned from the card to a card independant - * format that the Wireless Tools will understand - Jean II */ -static inline char *orinoco_translate_scan(struct net_device *dev, - struct iw_request_info *info, - char *current_ev, - char *end_buf, - union hermes_scan_info *bss, - unsigned int last_scanned) -{ - struct orinoco_private *priv = netdev_priv(dev); - u16 capabilities; - u16 channel; - struct iw_event iwe; /* Temporary buffer */ - char custom[MAX_CUSTOM_LEN]; - - memset(&iwe, 0, sizeof(iwe)); - - /* First entry *MUST* be the AP MAC address */ - iwe.cmd = SIOCGIWAP; - iwe.u.ap_addr.sa_family = ARPHRD_ETHER; - memcpy(iwe.u.ap_addr.sa_data, bss->a.bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_ADDR_LEN); - - /* Other entries will be displayed in the order we give them */ - - /* Add the ESSID */ - iwe.u.data.length = le16_to_cpu(bss->a.essid_len); - if (iwe.u.data.length > 32) - iwe.u.data.length = 32; - iwe.cmd = SIOCGIWESSID; - iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, bss->a.essid); - - /* Add mode */ - iwe.cmd = SIOCGIWMODE; - capabilities = le16_to_cpu(bss->a.capabilities); - if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { - if (capabilities & WLAN_CAPABILITY_ESS) - iwe.u.mode = IW_MODE_MASTER; - else - iwe.u.mode = IW_MODE_ADHOC; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_UINT_LEN); - } - - channel = bss->s.channel; - if ((channel >= 1) && (channel <= NUM_CHANNELS)) { - /* Add channel and frequency */ - iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = channel; - iwe.u.freq.e = 0; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_FREQ_LEN); - - iwe.u.freq.m = channel_frequency[channel-1] * 100000; - iwe.u.freq.e = 1; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_FREQ_LEN); - } - - /* Add quality statistics. level and noise in dB. No link quality */ - iwe.cmd = IWEVQUAL; - iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID; - iwe.u.qual.level = (__u8) le16_to_cpu(bss->a.level) - 0x95; - iwe.u.qual.noise = (__u8) le16_to_cpu(bss->a.noise) - 0x95; - /* Wireless tools prior to 27.pre22 will show link quality - * anyway, so we provide a reasonable value. */ - if (iwe.u.qual.level > iwe.u.qual.noise) - iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; - else - iwe.u.qual.qual = 0; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_QUAL_LEN); - - /* Add encryption capability */ - iwe.cmd = SIOCGIWENCODE; - if (capabilities & WLAN_CAPABILITY_PRIVACY) - iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; - else - iwe.u.data.flags = IW_ENCODE_DISABLED; - iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, NULL); - - /* Bit rate is not available in Lucent/Agere firmwares */ - if (priv->firmware_type != FIRMWARE_TYPE_AGERE) { - char *current_val = current_ev + iwe_stream_lcp_len(info); - int i; - int step; - - if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL) - step = 2; - else - step = 1; - - iwe.cmd = SIOCGIWRATE; - /* Those two flags are ignored... */ - iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; - /* Max 10 values */ - for (i = 0; i < 10; i += step) { - /* NULL terminated */ - if (bss->p.rates[i] == 0x0) - break; - /* Bit rate given in 500 kb/s units (+ 0x80) */ - iwe.u.bitrate.value = - ((bss->p.rates[i] & 0x7f) * 500000); - current_val = iwe_stream_add_value(info, current_ev, - current_val, - end_buf, &iwe, - IW_EV_PARAM_LEN); - } - /* Check if we added any event */ - if ((current_val - current_ev) > iwe_stream_lcp_len(info)) - current_ev = current_val; - } - - /* Beacon interval */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, - "bcn_int=%d", - le16_to_cpu(bss->a.beacon_interv)); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - /* Capabilites */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, - "capab=0x%04x", - capabilities); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - /* Add EXTRA: Age to display seconds since last beacon/probe response - * for given network. */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, - " Last beacon: %dms ago", - jiffies_to_msecs(jiffies - last_scanned)); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - return current_ev; -} - -static inline char *orinoco_translate_ext_scan(struct net_device *dev, - struct iw_request_info *info, - char *current_ev, - char *end_buf, - struct agere_ext_scan_info *bss, - unsigned int last_scanned) -{ - u16 capabilities; - u16 channel; - struct iw_event iwe; /* Temporary buffer */ - char custom[MAX_CUSTOM_LEN]; - u8 *ie; - - memset(&iwe, 0, sizeof(iwe)); - - /* First entry *MUST* be the AP MAC address */ - iwe.cmd = SIOCGIWAP; - iwe.u.ap_addr.sa_family = ARPHRD_ETHER; - memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN); - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_ADDR_LEN); - - /* Other entries will be displayed in the order we give them */ - - /* Add the ESSID */ - ie = bss->data; - iwe.u.data.length = ie[1]; - if (iwe.u.data.length) { - if (iwe.u.data.length > 32) - iwe.u.data.length = 32; - iwe.cmd = SIOCGIWESSID; - iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, &ie[2]); - } - - /* Add mode */ - capabilities = le16_to_cpu(bss->capabilities); - if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { - iwe.cmd = SIOCGIWMODE; - if (capabilities & WLAN_CAPABILITY_ESS) - iwe.u.mode = IW_MODE_MASTER; - else - iwe.u.mode = IW_MODE_ADHOC; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_UINT_LEN); - } - - ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_DS_PARAMS); - channel = ie ? ie[2] : 0; - if ((channel >= 1) && (channel <= NUM_CHANNELS)) { - /* Add channel and frequency */ - iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = channel; - iwe.u.freq.e = 0; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_FREQ_LEN); - - iwe.u.freq.m = channel_frequency[channel-1] * 100000; - iwe.u.freq.e = 1; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_FREQ_LEN); - } - - /* Add quality statistics. level and noise in dB. No link quality */ - iwe.cmd = IWEVQUAL; - iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID; - iwe.u.qual.level = bss->level - 0x95; - iwe.u.qual.noise = bss->noise - 0x95; - /* Wireless tools prior to 27.pre22 will show link quality - * anyway, so we provide a reasonable value. */ - if (iwe.u.qual.level > iwe.u.qual.noise) - iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; - else - iwe.u.qual.qual = 0; - current_ev = iwe_stream_add_event(info, current_ev, end_buf, - &iwe, IW_EV_QUAL_LEN); - - /* Add encryption capability */ - iwe.cmd = SIOCGIWENCODE; - if (capabilities & WLAN_CAPABILITY_PRIVACY) - iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; - else - iwe.u.data.flags = IW_ENCODE_DISABLED; - iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, NULL); - - /* WPA IE */ - ie = orinoco_get_wpa_ie(bss->data, sizeof(bss->data)); - if (ie) { - iwe.cmd = IWEVGENIE; - iwe.u.data.length = ie[1] + 2; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, ie); - } - - /* RSN IE */ - ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_RSN); - if (ie) { - iwe.cmd = IWEVGENIE; - iwe.u.data.length = ie[1] + 2; - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, ie); - } - - ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_SUPP_RATES); - if (ie) { - char *p = current_ev + iwe_stream_lcp_len(info); - int i; - - iwe.cmd = SIOCGIWRATE; - /* Those two flags are ignored... */ - iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; - - for (i = 2; i < (ie[1] + 2); i++) { - iwe.u.bitrate.value = ((ie[i] & 0x7F) * 500000); - p = iwe_stream_add_value(info, current_ev, p, end_buf, - &iwe, IW_EV_PARAM_LEN); - } - /* Check if we added any event */ - if (p > (current_ev + iwe_stream_lcp_len(info))) - current_ev = p; - } - - /* Timestamp */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = - snprintf(custom, MAX_CUSTOM_LEN, "tsf=%016llx", - (unsigned long long) le64_to_cpu(bss->timestamp)); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - /* Beacon interval */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, - "bcn_int=%d", - le16_to_cpu(bss->beacon_interval)); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - /* Capabilites */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, - "capab=0x%04x", - capabilities); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - /* Add EXTRA: Age to display seconds since last beacon/probe response - * for given network. */ - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, - " Last beacon: %dms ago", - jiffies_to_msecs(jiffies - last_scanned)); - if (iwe.u.data.length) - current_ev = iwe_stream_add_point(info, current_ev, end_buf, - &iwe, custom); - - return current_ev; -} - -/* Return results of a scan */ -static int orinoco_ioctl_getscan(struct net_device *dev, - struct iw_request_info *info, - struct iw_point *srq, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - int err = 0; - unsigned long flags; - char *current_ev = extra; - - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - - if (priv->scan_inprogress) { - /* Important note : we don't want to block the caller - * until results are ready for various reasons. - * First, managing wait queues is complex and racy. - * Second, we grab some rtnetlink lock before comming - * here (in dev_ioctl()). - * Third, we generate an Wireless Event, so the - * caller can wait itself on that - Jean II */ - err = -EAGAIN; - goto out; - } - - if (priv->has_ext_scan) { - struct xbss_element *bss; - - list_for_each_entry(bss, &priv->bss_list, list) { - /* Translate this entry to WE format */ - current_ev = - orinoco_translate_ext_scan(dev, info, - current_ev, - extra + srq->length, - &bss->bss, - bss->last_scanned); - - /* Check if there is space for one more entry */ - if ((extra + srq->length - current_ev) - <= IW_EV_ADDR_LEN) { - /* Ask user space to try again with a - * bigger buffer */ - err = -E2BIG; - goto out; - } - } - - } else { - struct bss_element *bss; - - list_for_each_entry(bss, &priv->bss_list, list) { - /* Translate this entry to WE format */ - current_ev = orinoco_translate_scan(dev, info, - current_ev, - extra + srq->length, - &bss->bss, - bss->last_scanned); - - /* Check if there is space for one more entry */ - if ((extra + srq->length - current_ev) - <= IW_EV_ADDR_LEN) { - /* Ask user space to try again with a - * bigger buffer */ - err = -E2BIG; - goto out; - } - } - } - - srq->length = (current_ev - extra); - srq->flags = (__u16) priv->scan_mode; - -out: - orinoco_unlock(priv, &flags); - return err; -} - -/* Commit handler, called after set operations */ -static int orinoco_ioctl_commit(struct net_device *dev, - struct iw_request_info *info, - void *wrqu, - char *extra) -{ - struct orinoco_private *priv = netdev_priv(dev); - struct hermes *hw = &priv->hw; - unsigned long flags; - int err = 0; - - if (!priv->open) - return 0; - - if (priv->broken_disableport) { - orinoco_reset(&priv->reset_work); - return 0; - } - - if (orinoco_lock(priv, &flags) != 0) - return err; - - err = hermes_disable_port(hw, 0); - if (err) { - printk(KERN_WARNING "%s: Unable to disable port " - "while reconfiguring card\n", dev->name); - priv->broken_disableport = 1; - goto out; - } - - err = __orinoco_program_rids(dev); - if (err) { - printk(KERN_WARNING "%s: Unable to reconfigure card\n", - dev->name); - goto out; - } - - err = hermes_enable_port(hw, 0); - if (err) { - printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", - dev->name); - goto out; - } - - out: - if (err) { - printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); - schedule_work(&priv->reset_work); - err = 0; - } - - orinoco_unlock(priv, &flags); - return err; -} - -static const struct iw_priv_args orinoco_privtab[] = { - { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, - { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, - { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - 0, "set_port3" }, - { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_port3" }, - { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - 0, "set_preamble" }, - { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_preamble" }, - { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - 0, "set_ibssport" }, - { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, - "get_ibssport" }, - { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN, - "get_rid" }, -}; - - -/* - * Structures to export the Wireless Handlers - */ - -#define STD_IW_HANDLER(id, func) \ - [IW_IOCTL_IDX(id)] = (iw_handler) func -static const iw_handler orinoco_handler[] = { - STD_IW_HANDLER(SIOCSIWCOMMIT, orinoco_ioctl_commit), - STD_IW_HANDLER(SIOCGIWNAME, orinoco_ioctl_getname), - STD_IW_HANDLER(SIOCSIWFREQ, orinoco_ioctl_setfreq), - STD_IW_HANDLER(SIOCGIWFREQ, orinoco_ioctl_getfreq), - STD_IW_HANDLER(SIOCSIWMODE, orinoco_ioctl_setmode), - STD_IW_HANDLER(SIOCGIWMODE, orinoco_ioctl_getmode), - STD_IW_HANDLER(SIOCSIWSENS, orinoco_ioctl_setsens), - STD_IW_HANDLER(SIOCGIWSENS, orinoco_ioctl_getsens), - STD_IW_HANDLER(SIOCGIWRANGE, orinoco_ioctl_getiwrange), - STD_IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy), - STD_IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy), - STD_IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy), - STD_IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy), - STD_IW_HANDLER(SIOCSIWAP, orinoco_ioctl_setwap), - STD_IW_HANDLER(SIOCGIWAP, orinoco_ioctl_getwap), - STD_IW_HANDLER(SIOCSIWSCAN, orinoco_ioctl_setscan), - STD_IW_HANDLER(SIOCGIWSCAN, orinoco_ioctl_getscan), - STD_IW_HANDLER(SIOCSIWESSID, orinoco_ioctl_setessid), - STD_IW_HANDLER(SIOCGIWESSID, orinoco_ioctl_getessid), - STD_IW_HANDLER(SIOCSIWNICKN, orinoco_ioctl_setnick), - STD_IW_HANDLER(SIOCGIWNICKN, orinoco_ioctl_getnick), - STD_IW_HANDLER(SIOCSIWRATE, orinoco_ioctl_setrate), - STD_IW_HANDLER(SIOCGIWRATE, orinoco_ioctl_getrate), - STD_IW_HANDLER(SIOCSIWRTS, orinoco_ioctl_setrts), - STD_IW_HANDLER(SIOCGIWRTS, orinoco_ioctl_getrts), - STD_IW_HANDLER(SIOCSIWFRAG, orinoco_ioctl_setfrag), - STD_IW_HANDLER(SIOCGIWFRAG, orinoco_ioctl_getfrag), - STD_IW_HANDLER(SIOCGIWRETRY, orinoco_ioctl_getretry), - STD_IW_HANDLER(SIOCSIWENCODE, orinoco_ioctl_setiwencode), - STD_IW_HANDLER(SIOCGIWENCODE, orinoco_ioctl_getiwencode), - STD_IW_HANDLER(SIOCSIWPOWER, orinoco_ioctl_setpower), - STD_IW_HANDLER(SIOCGIWPOWER, orinoco_ioctl_getpower), - STD_IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie), - STD_IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie), - STD_IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme), - STD_IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth), - STD_IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth), - STD_IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext), - STD_IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext), -}; - - -/* - Added typecasting since we no longer use iwreq_data -- Moustafa - */ -static const iw_handler orinoco_private_handler[] = { - [0] = (iw_handler) orinoco_ioctl_reset, - [1] = (iw_handler) orinoco_ioctl_reset, - [2] = (iw_handler) orinoco_ioctl_setport3, - [3] = (iw_handler) orinoco_ioctl_getport3, - [4] = (iw_handler) orinoco_ioctl_setpreamble, - [5] = (iw_handler) orinoco_ioctl_getpreamble, - [6] = (iw_handler) orinoco_ioctl_setibssport, - [7] = (iw_handler) orinoco_ioctl_getibssport, - [9] = (iw_handler) orinoco_ioctl_getrid, -}; - -static const struct iw_handler_def orinoco_handler_def = { - .num_standard = ARRAY_SIZE(orinoco_handler), - .num_private = ARRAY_SIZE(orinoco_private_handler), - .num_private_args = ARRAY_SIZE(orinoco_privtab), - .standard = orinoco_handler, - .private = orinoco_private_handler, - .private_args = orinoco_privtab, - .get_wireless_stats = orinoco_get_wireless_stats, -}; - -static void orinoco_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - struct orinoco_private *priv = netdev_priv(dev); - - strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1); - strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1); - strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1); - if (dev->dev.parent) - strncpy(info->bus_info, dev->dev.parent->bus_id, - sizeof(info->bus_info) - 1); - else - snprintf(info->bus_info, sizeof(info->bus_info) - 1, - "PCMCIA %p", priv->hw.iobase); -} - -static const struct ethtool_ops orinoco_ethtool_ops = { - .get_drvinfo = orinoco_get_drvinfo, - .get_link = ethtool_op_get_link, -}; - -/********************************************************************/ -/* Module initialization */ -/********************************************************************/ - -EXPORT_SYMBOL(alloc_orinocodev); -EXPORT_SYMBOL(free_orinocodev); - -EXPORT_SYMBOL(__orinoco_up); -EXPORT_SYMBOL(__orinoco_down); -EXPORT_SYMBOL(orinoco_reinit_firmware); - -EXPORT_SYMBOL(orinoco_interrupt); - -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (David Gibson , " - "Pavel Roskin , et al)"; - -static int __init init_orinoco(void) -{ - printk(KERN_DEBUG "%s\n", version); - return 0; -} - -static void __exit exit_orinoco(void) -{ -} - -module_init(init_orinoco); -module_exit(exit_orinoco); diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h deleted file mode 100644 index 8c2953834923..000000000000 --- a/drivers/net/wireless/orinoco.h +++ /dev/null @@ -1,218 +0,0 @@ -/* orinoco.h - * - * Common definitions to all pieces of the various orinoco - * drivers - */ - -#ifndef _ORINOCO_H -#define _ORINOCO_H - -#define DRIVER_VERSION "0.15" - -#include -#include -#include -#include - -#include "hermes.h" - -/* To enable debug messages */ -//#define ORINOCO_DEBUG 3 - -#define WIRELESS_SPY // enable iwspy support - -#define MAX_SCAN_LEN 4096 - -#define ORINOCO_MAX_KEY_SIZE 14 -#define ORINOCO_MAX_KEYS 4 - -struct orinoco_key { - __le16 len; /* always stored as little-endian */ - char data[ORINOCO_MAX_KEY_SIZE]; -} __attribute__ ((packed)); - -#define TKIP_KEYLEN 16 -#define MIC_KEYLEN 8 - -struct orinoco_tkip_key { - u8 tkip[TKIP_KEYLEN]; - u8 tx_mic[MIC_KEYLEN]; - u8 rx_mic[MIC_KEYLEN]; -}; - -typedef enum { - FIRMWARE_TYPE_AGERE, - FIRMWARE_TYPE_INTERSIL, - FIRMWARE_TYPE_SYMBOL -} fwtype_t; - -struct bss_element { - union hermes_scan_info bss; - unsigned long last_scanned; - struct list_head list; -}; - -struct xbss_element { - struct agere_ext_scan_info bss; - unsigned long last_scanned; - struct list_head list; -}; - -struct hermes_rx_descriptor; - -struct orinoco_rx_data { - struct hermes_rx_descriptor *desc; - struct sk_buff *skb; - struct list_head list; -}; - -struct firmware; - -struct orinoco_private { - void *card; /* Pointer to card dependent structure */ - struct device *dev; - int (*hard_reset)(struct orinoco_private *); - int (*stop_fw)(struct orinoco_private *, int); - - /* Synchronisation stuff */ - spinlock_t lock; - int hw_unavailable; - struct work_struct reset_work; - - /* Interrupt tasklets */ - struct tasklet_struct rx_tasklet; - struct list_head rx_list; - struct orinoco_rx_data *rx_data; - - /* driver state */ - int open; - u16 last_linkstatus; - struct work_struct join_work; - struct work_struct wevent_work; - - /* Net device stuff */ - struct net_device *ndev; - struct net_device_stats stats; - struct iw_statistics wstats; - - /* Hardware control variables */ - hermes_t hw; - u16 txfid; - - /* Capabilities of the hardware/firmware */ - fwtype_t firmware_type; - char fw_name[32]; - int ibss_port; - int nicbuf_size; - u16 channel_mask; - - /* Boolean capabilities */ - unsigned int has_ibss:1; - unsigned int has_port3:1; - unsigned int has_wep:1; - unsigned int has_big_wep:1; - unsigned int has_mwo:1; - unsigned int has_pm:1; - unsigned int has_preamble:1; - unsigned int has_sensitivity:1; - unsigned int has_hostscan:1; - unsigned int has_alt_txcntl:1; - unsigned int has_ext_scan:1; - unsigned int has_wpa:1; - unsigned int do_fw_download:1; - unsigned int broken_disableport:1; - unsigned int broken_monitor:1; - - /* Configuration paramaters */ - u32 iw_mode; - int prefer_port3; - u16 encode_alg, wep_restrict, tx_key; - struct orinoco_key keys[ORINOCO_MAX_KEYS]; - int bitratemode; - char nick[IW_ESSID_MAX_SIZE+1]; - char desired_essid[IW_ESSID_MAX_SIZE+1]; - char desired_bssid[ETH_ALEN]; - int bssid_fixed; - u16 frag_thresh, mwo_robust; - u16 channel; - u16 ap_density, rts_thresh; - u16 pm_on, pm_mcast, pm_period, pm_timeout; - u16 preamble; -#ifdef WIRELESS_SPY - struct iw_spy_data spy_data; /* iwspy support */ - struct iw_public_data wireless_data; -#endif - - /* Configuration dependent variables */ - int port_type, createibss; - int promiscuous, mc_count; - - /* Scanning support */ - struct list_head bss_list; - struct list_head bss_free_list; - void *bss_xbss_data; - - int scan_inprogress; /* Scan pending... */ - u32 scan_mode; /* Type of scan done */ - - /* WPA support */ - u8 *wpa_ie; - int wpa_ie_len; - - struct orinoco_tkip_key tkip_key[ORINOCO_MAX_KEYS]; - struct crypto_hash *rx_tfm_mic; - struct crypto_hash *tx_tfm_mic; - - unsigned int wpa_enabled:1; - unsigned int tkip_cm_active:1; - unsigned int key_mgmt:3; - - /* Cached in memory firmware to use in ->resume */ - const struct firmware *cached_fw; -}; - -#ifdef ORINOCO_DEBUG -extern int orinoco_debug; -#define DEBUG(n, args...) do { if (orinoco_debug>(n)) printk(KERN_DEBUG args); } while(0) -#else -#define DEBUG(n, args...) do { } while (0) -#endif /* ORINOCO_DEBUG */ - -/********************************************************************/ -/* Exported prototypes */ -/********************************************************************/ - -extern struct net_device *alloc_orinocodev( - int sizeof_card, struct device *device, - int (*hard_reset)(struct orinoco_private *), - int (*stop_fw)(struct orinoco_private *, int)); -extern void free_orinocodev(struct net_device *dev); -extern int __orinoco_up(struct net_device *dev); -extern int __orinoco_down(struct net_device *dev); -extern int orinoco_reinit_firmware(struct net_device *dev); -extern irqreturn_t orinoco_interrupt(int irq, void * dev_id); - -/********************************************************************/ -/* Locking and synchronization functions */ -/********************************************************************/ - -static inline int orinoco_lock(struct orinoco_private *priv, - unsigned long *flags) -{ - spin_lock_irqsave(&priv->lock, *flags); - if (priv->hw_unavailable) { - DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n", - priv->ndev); - spin_unlock_irqrestore(&priv->lock, *flags); - return -EBUSY; - } - return 0; -} - -static inline void orinoco_unlock(struct orinoco_private *priv, - unsigned long *flags) -{ - spin_unlock_irqrestore(&priv->lock, *flags); -} - -#endif /* _ORINOCO_H */ diff --git a/drivers/net/wireless/orinoco/Makefile b/drivers/net/wireless/orinoco/Makefile new file mode 100644 index 000000000000..791366e08c50 --- /dev/null +++ b/drivers/net/wireless/orinoco/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the orinoco wireless device drivers. +# + +obj-$(CONFIG_HERMES) += orinoco.o hermes.o hermes_dld.o +obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o +obj-$(CONFIG_APPLE_AIRPORT) += airport.o +obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o +obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o +obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o +obj-$(CONFIG_NORTEL_HERMES) += orinoco_nortel.o +obj-$(CONFIG_PCMCIA_SPECTRUM) += spectrum_cs.o diff --git a/drivers/net/wireless/orinoco/airport.c b/drivers/net/wireless/orinoco/airport.c new file mode 100644 index 000000000000..ce03a2e865fa --- /dev/null +++ b/drivers/net/wireless/orinoco/airport.c @@ -0,0 +1,286 @@ +/* airport.c + * + * A driver for "Hermes" chipset based Apple Airport wireless + * card. + * + * Copyright notice & release notes in file orinoco.c + * + * Note specific to airport stub: + * + * 0.05 : first version of the new split driver + * 0.06 : fix possible hang on powerup, add sleep support + */ + +#define DRIVER_NAME "airport" +#define PFX DRIVER_NAME ": " + +#include +#include +#include +#include +#include + +#include "orinoco.h" + +#define AIRPORT_IO_LEN (0x1000) /* one page */ + +struct airport { + struct macio_dev *mdev; + void __iomem *vaddr; + int irq_requested; + int ndev_registered; +}; + +static int +airport_suspend(struct macio_dev *mdev, pm_message_t state) +{ + struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err; + + printk(KERN_DEBUG "%s: Airport entering sleep mode\n", dev->name); + + err = orinoco_lock(priv, &flags); + if (err) { + printk(KERN_ERR "%s: hw_unavailable on PBOOK_SLEEP_NOW\n", + dev->name); + return 0; + } + + err = __orinoco_down(dev); + if (err) + printk(KERN_WARNING "%s: PBOOK_SLEEP_NOW: Error %d downing interface\n", + dev->name, err); + + netif_device_detach(dev); + + priv->hw_unavailable++; + + orinoco_unlock(priv, &flags); + + disable_irq(dev->irq); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0); + + return 0; +} + +static int +airport_resume(struct macio_dev *mdev) +{ + struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err; + + printk(KERN_DEBUG "%s: Airport waking up\n", dev->name); + + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1); + msleep(200); + + enable_irq(dev->irq); + + err = orinoco_reinit_firmware(dev); + if (err) { + printk(KERN_ERR "%s: Error %d re-initializing firmware on PBOOK_WAKE\n", + dev->name, err); + return 0; + } + + spin_lock_irqsave(&priv->lock, flags); + + netif_device_attach(dev); + + priv->hw_unavailable--; + + if (priv->open && (! priv->hw_unavailable)) { + err = __orinoco_up(dev); + if (err) + printk(KERN_ERR "%s: Error %d restarting card on PBOOK_WAKE\n", + dev->name, err); + } + + + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int +airport_detach(struct macio_dev *mdev) +{ + struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); + struct orinoco_private *priv = netdev_priv(dev); + struct airport *card = priv->card; + + if (card->ndev_registered) + unregister_netdev(dev); + card->ndev_registered = 0; + + if (card->irq_requested) + free_irq(dev->irq, dev); + card->irq_requested = 0; + + if (card->vaddr) + iounmap(card->vaddr); + card->vaddr = NULL; + + macio_release_resource(mdev, 0); + + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0); + ssleep(1); + + macio_set_drvdata(mdev, NULL); + free_orinocodev(dev); + + return 0; +} + +static int airport_hard_reset(struct orinoco_private *priv) +{ + /* It would be nice to power cycle the Airport for a real hard + * reset, but for some reason although it appears to + * re-initialize properly, it falls in a screaming heap + * shortly afterwards. */ +#if 0 + struct net_device *dev = priv->ndev; + struct airport *card = priv->card; + + /* Vitally important. If we don't do this it seems we get an + * interrupt somewhere during the power cycle, since + * hw_unavailable is already set it doesn't get ACKed, we get + * into an interrupt loop and the PMU decides to turn us + * off. */ + disable_irq(dev->irq); + + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 0); + ssleep(1); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 1); + ssleep(1); + + enable_irq(dev->irq); + ssleep(1); +#endif + + return 0; +} + +static int +airport_attach(struct macio_dev *mdev, const struct of_device_id *match) +{ + struct orinoco_private *priv; + struct net_device *dev; + struct airport *card; + unsigned long phys_addr; + hermes_t *hw; + + if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) { + printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n"); + return -ENODEV; + } + + /* Allocate space for private device-specific data */ + dev = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev, + airport_hard_reset, NULL); + if (! dev) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + return -ENODEV; + } + priv = netdev_priv(dev); + card = priv->card; + + hw = &priv->hw; + card->mdev = mdev; + + if (macio_request_resource(mdev, 0, "airport")) { + printk(KERN_ERR PFX "can't request IO resource !\n"); + free_orinocodev(dev); + return -EBUSY; + } + + SET_NETDEV_DEV(dev, &mdev->ofdev.dev); + + macio_set_drvdata(mdev, dev); + + /* Setup interrupts & base address */ + dev->irq = macio_irq(mdev, 0); + phys_addr = macio_resource_start(mdev, 0); /* Physical address */ + printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr); + dev->base_addr = phys_addr; + card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN); + if (!card->vaddr) { + printk(KERN_ERR PFX "ioremap() failed\n"); + goto failed; + } + + hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING); + + /* Power up card */ + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1); + ssleep(1); + + /* Reset it before we get the interrupt */ + hermes_init(hw); + + if (request_irq(dev->irq, orinoco_interrupt, 0, dev->name, dev)) { + printk(KERN_ERR PFX "Couldn't get IRQ %d\n", dev->irq); + goto failed; + } + card->irq_requested = 1; + + /* Tell the stack we exist */ + if (register_netdev(dev) != 0) { + printk(KERN_ERR PFX "register_netdev() failed\n"); + goto failed; + } + printk(KERN_DEBUG PFX "Card registered for interface %s\n", dev->name); + card->ndev_registered = 1; + return 0; + failed: + airport_detach(mdev); + return -ENODEV; +} /* airport_attach */ + + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Benjamin Herrenschmidt )"; +MODULE_AUTHOR("Benjamin Herrenschmidt "); +MODULE_DESCRIPTION("Driver for the Apple Airport wireless card."); +MODULE_LICENSE("Dual MPL/GPL"); + +static struct of_device_id airport_match[] = +{ + { + .name = "radio", + }, + {}, +}; + +MODULE_DEVICE_TABLE (of, airport_match); + +static struct macio_driver airport_driver = +{ + .name = DRIVER_NAME, + .match_table = airport_match, + .probe = airport_attach, + .remove = airport_detach, + .suspend = airport_suspend, + .resume = airport_resume, +}; + +static int __init +init_airport(void) +{ + printk(KERN_DEBUG "%s\n", version); + + return macio_register_driver(&airport_driver); +} + +static void __exit +exit_airport(void) +{ + return macio_unregister_driver(&airport_driver); +} + +module_init(init_airport); +module_exit(exit_airport); diff --git a/drivers/net/wireless/orinoco/hermes.c b/drivers/net/wireless/orinoco/hermes.c new file mode 100644 index 000000000000..bfa375369df3 --- /dev/null +++ b/drivers/net/wireless/orinoco/hermes.c @@ -0,0 +1,544 @@ +/* hermes.c + * + * Driver core for the "Hermes" wireless MAC controller, as used in + * the Lucent Orinoco and Cabletron RoamAbout cards. It should also + * work on the hfa3841 and hfa3842 MAC controller chips used in the + * Prism II chipsets. + * + * This is not a complete driver, just low-level access routines for + * the MAC controller itself. + * + * Based on the prism2 driver from Absolute Value Systems' linux-wlan + * project, the Linux wvlan_cs driver, Lucent's HCF-Light + * (wvlan_hcf.c) library, and the NetBSD wireless driver (in no + * particular order). + * + * Copyright (C) 2000, David Gibson, Linuxcare Australia. + * (C) Copyright David Gibson, IBM Corp. 2001-2003. + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#include +#include +#include +#include + +#include "hermes.h" + +MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset and Prism II HFA384x wireless MAC controller"); +MODULE_AUTHOR("Pavel Roskin " + " & David Gibson "); +MODULE_LICENSE("Dual MPL/GPL"); + +/* These are maximum timeouts. Most often, card wil react much faster */ +#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */ +#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */ +#define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */ +#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */ + +/* + * Debugging helpers + */ + +#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \ + printk(stuff);} while (0) + +#undef HERMES_DEBUG +#ifdef HERMES_DEBUG +#include + +#define DEBUG(lvl, stuff...) if ( (lvl) <= HERMES_DEBUG) DMSG(stuff) + +#else /* ! HERMES_DEBUG */ + +#define DEBUG(lvl, stuff...) do { } while (0) + +#endif /* ! HERMES_DEBUG */ + + +/* + * Internal functions + */ + +/* Issue a command to the chip. Waiting for it to complete is the caller's + problem. + + Returns -EBUSY if the command register is busy, 0 on success. + + Callable from any context. +*/ +static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0, + u16 param1, u16 param2) +{ + int k = CMD_BUSY_TIMEOUT; + u16 reg; + + /* First wait for the command register to unbusy */ + reg = hermes_read_regn(hw, CMD); + while ( (reg & HERMES_CMD_BUSY) && k ) { + k--; + udelay(1); + reg = hermes_read_regn(hw, CMD); + } + if (reg & HERMES_CMD_BUSY) { + return -EBUSY; + } + + hermes_write_regn(hw, PARAM2, param2); + hermes_write_regn(hw, PARAM1, param1); + hermes_write_regn(hw, PARAM0, param0); + hermes_write_regn(hw, CMD, cmd); + + return 0; +} + +/* + * Function definitions + */ + +/* For doing cmds that wipe the magic constant in SWSUPPORT0 */ +int hermes_doicmd_wait(hermes_t *hw, u16 cmd, + u16 parm0, u16 parm1, u16 parm2, + struct hermes_response *resp) +{ + int err = 0; + int k; + u16 status, reg; + + err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2); + if (err) + return err; + + reg = hermes_read_regn(hw, EVSTAT); + k = CMD_INIT_TIMEOUT; + while ((!(reg & HERMES_EV_CMD)) && k) { + k--; + udelay(10); + reg = hermes_read_regn(hw, EVSTAT); + } + + hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC); + + if (!hermes_present(hw)) { + DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n", + hw->iobase); + err = -ENODEV; + goto out; + } + + if (!(reg & HERMES_EV_CMD)) { + printk(KERN_ERR "hermes @ %p: " + "Timeout waiting for card to reset (reg=0x%04x)!\n", + hw->iobase, reg); + err = -ETIMEDOUT; + goto out; + } + + status = hermes_read_regn(hw, STATUS); + if (resp) { + resp->status = status; + resp->resp0 = hermes_read_regn(hw, RESP0); + resp->resp1 = hermes_read_regn(hw, RESP1); + resp->resp2 = hermes_read_regn(hw, RESP2); + } + + hermes_write_regn(hw, EVACK, HERMES_EV_CMD); + + if (status & HERMES_STATUS_RESULT) + err = -EIO; +out: + return err; +} +EXPORT_SYMBOL(hermes_doicmd_wait); + +void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing) +{ + hw->iobase = address; + hw->reg_spacing = reg_spacing; + hw->inten = 0x0; +} +EXPORT_SYMBOL(hermes_struct_init); + +int hermes_init(hermes_t *hw) +{ + u16 reg; + int err = 0; + int k; + + /* We don't want to be interrupted while resetting the chipset */ + hw->inten = 0x0; + hermes_write_regn(hw, INTEN, 0); + hermes_write_regn(hw, EVACK, 0xffff); + + /* Normally it's a "can't happen" for the command register to + be busy when we go to issue a command because we are + serializing all commands. However we want to have some + chance of resetting the card even if it gets into a stupid + state, so we actually wait to see if the command register + will unbusy itself here. */ + k = CMD_BUSY_TIMEOUT; + reg = hermes_read_regn(hw, CMD); + while (k && (reg & HERMES_CMD_BUSY)) { + if (reg == 0xffff) /* Special case - the card has probably been removed, + so don't wait for the timeout */ + return -ENODEV; + + k--; + udelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* No need to explicitly handle the timeout - if we've timed + out hermes_issue_cmd() will probably return -EBUSY below */ + + /* According to the documentation, EVSTAT may contain + obsolete event occurrence information. We have to acknowledge + it by writing EVACK. */ + reg = hermes_read_regn(hw, EVSTAT); + hermes_write_regn(hw, EVACK, reg); + + /* We don't use hermes_docmd_wait here, because the reset wipes + the magic constant in SWSUPPORT0 away, and it gets confused */ + err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL); + + return err; +} +EXPORT_SYMBOL(hermes_init); + +/* Issue a command to the chip, and (busy!) wait for it to + * complete. + * + * Returns: < 0 on internal error, 0 on success, > 0 on error returned by the firmware + * + * Callable from any context, but locking is your problem. */ +int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, + struct hermes_response *resp) +{ + int err; + int k; + u16 reg; + u16 status; + + err = hermes_issue_cmd(hw, cmd, parm0, 0, 0); + if (err) { + if (! hermes_present(hw)) { + if (net_ratelimit()) + printk(KERN_WARNING "hermes @ %p: " + "Card removed while issuing command " + "0x%04x.\n", hw->iobase, cmd); + err = -ENODEV; + } else + if (net_ratelimit()) + printk(KERN_ERR "hermes @ %p: " + "Error %d issuing command 0x%04x.\n", + hw->iobase, err, cmd); + goto out; + } + + reg = hermes_read_regn(hw, EVSTAT); + k = CMD_COMPL_TIMEOUT; + while ( (! (reg & HERMES_EV_CMD)) && k) { + k--; + udelay(10); + reg = hermes_read_regn(hw, EVSTAT); + } + + if (! hermes_present(hw)) { + printk(KERN_WARNING "hermes @ %p: Card removed " + "while waiting for command 0x%04x completion.\n", + hw->iobase, cmd); + err = -ENODEV; + goto out; + } + + if (! (reg & HERMES_EV_CMD)) { + printk(KERN_ERR "hermes @ %p: Timeout waiting for " + "command 0x%04x completion.\n", hw->iobase, cmd); + err = -ETIMEDOUT; + goto out; + } + + status = hermes_read_regn(hw, STATUS); + if (resp) { + resp->status = status; + resp->resp0 = hermes_read_regn(hw, RESP0); + resp->resp1 = hermes_read_regn(hw, RESP1); + resp->resp2 = hermes_read_regn(hw, RESP2); + } + + hermes_write_regn(hw, EVACK, HERMES_EV_CMD); + + if (status & HERMES_STATUS_RESULT) + err = -EIO; + + out: + return err; +} +EXPORT_SYMBOL(hermes_docmd_wait); + +int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) +{ + int err = 0; + int k; + u16 reg; + + if ( (size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX) ) + return -EINVAL; + + err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL); + if (err) { + return err; + } + + reg = hermes_read_regn(hw, EVSTAT); + k = ALLOC_COMPL_TIMEOUT; + while ( (! (reg & HERMES_EV_ALLOC)) && k) { + k--; + udelay(10); + reg = hermes_read_regn(hw, EVSTAT); + } + + if (! hermes_present(hw)) { + printk(KERN_WARNING "hermes @ %p: " + "Card removed waiting for frame allocation.\n", + hw->iobase); + return -ENODEV; + } + + if (! (reg & HERMES_EV_ALLOC)) { + printk(KERN_ERR "hermes @ %p: " + "Timeout waiting for frame allocation\n", + hw->iobase); + return -ETIMEDOUT; + } + + *fid = hermes_read_regn(hw, ALLOCFID); + hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC); + + return 0; +} +EXPORT_SYMBOL(hermes_allocate); + +/* Set up a BAP to read a particular chunk of data from card's internal buffer. + * + * Returns: < 0 on internal failure (errno), 0 on success, >0 on error + * from firmware + * + * Callable from any context */ +static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) +{ + int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0; + int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0; + int k; + u16 reg; + + /* Paranoia.. */ + if ( (offset > HERMES_BAP_OFFSET_MAX) || (offset % 2) ) + return -EINVAL; + + k = HERMES_BAP_BUSY_TIMEOUT; + reg = hermes_read_reg(hw, oreg); + while ((reg & HERMES_OFFSET_BUSY) && k) { + k--; + udelay(1); + reg = hermes_read_reg(hw, oreg); + } + + if (reg & HERMES_OFFSET_BUSY) + return -ETIMEDOUT; + + /* Now we actually set up the transfer */ + hermes_write_reg(hw, sreg, id); + hermes_write_reg(hw, oreg, offset); + + /* Wait for the BAP to be ready */ + k = HERMES_BAP_BUSY_TIMEOUT; + reg = hermes_read_reg(hw, oreg); + while ( (reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) { + k--; + udelay(1); + reg = hermes_read_reg(hw, oreg); + } + + if (reg != offset) { + printk(KERN_ERR "hermes @ %p: BAP%d offset %s: " + "reg=0x%x id=0x%x offset=0x%x\n", hw->iobase, bap, + (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error", + reg, id, offset); + + if (reg & HERMES_OFFSET_BUSY) { + return -ETIMEDOUT; + } + + return -EIO; /* error or wrong offset */ + } + + return 0; +} + +/* Read a block of data from the chip's buffer, via the + * BAP. Synchronization/serialization is the caller's problem. len + * must be even. + * + * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware + */ +int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, + u16 id, u16 offset) +{ + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + int err = 0; + + if ( (len < 0) || (len % 2) ) + return -EINVAL; + + err = hermes_bap_seek(hw, bap, id, offset); + if (err) + goto out; + + /* Actually do the transfer */ + hermes_read_words(hw, dreg, buf, len/2); + + out: + return err; +} +EXPORT_SYMBOL(hermes_bap_pread); + +/* Write a block of data to the chip's buffer, via the + * BAP. Synchronization/serialization is the caller's problem. + * + * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware + */ +int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, + u16 id, u16 offset) +{ + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + int err = 0; + + if (len < 0) + return -EINVAL; + + err = hermes_bap_seek(hw, bap, id, offset); + if (err) + goto out; + + /* Actually do the transfer */ + hermes_write_bytes(hw, dreg, buf, len); + + out: + return err; +} +EXPORT_SYMBOL(hermes_bap_pwrite); + +/* Read a Length-Type-Value record from the card. + * + * If length is NULL, we ignore the length read from the card, and + * read the entire buffer regardless. This is useful because some of + * the configuration records appear to have incorrect lengths in + * practice. + * + * Callable from user or bh context. */ +int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, + u16 *length, void *buf) +{ + int err = 0; + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + u16 rlength, rtype; + unsigned nwords; + + if ( (bufsize < 0) || (bufsize % 2) ) + return -EINVAL; + + err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL); + if (err) + return err; + + err = hermes_bap_seek(hw, bap, rid, 0); + if (err) + return err; + + rlength = hermes_read_reg(hw, dreg); + + if (! rlength) + return -ENODATA; + + rtype = hermes_read_reg(hw, dreg); + + if (length) + *length = rlength; + + if (rtype != rid) + printk(KERN_WARNING "hermes @ %p: %s(): " + "rid (0x%04x) does not match type (0x%04x)\n", + hw->iobase, __func__, rid, rtype); + if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize) + printk(KERN_WARNING "hermes @ %p: " + "Truncating LTV record from %d to %d bytes. " + "(rid=0x%04x, len=0x%04x)\n", hw->iobase, + HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength); + + nwords = min((unsigned)rlength - 1, bufsize / 2); + hermes_read_words(hw, dreg, buf, nwords); + + return 0; +} +EXPORT_SYMBOL(hermes_read_ltv); + +int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, + u16 length, const void *value) +{ + int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; + int err = 0; + unsigned count; + + if (length == 0) + return -EINVAL; + + err = hermes_bap_seek(hw, bap, rid, 0); + if (err) + return err; + + hermes_write_reg(hw, dreg, length); + hermes_write_reg(hw, dreg, rid); + + count = length - 1; + + hermes_write_bytes(hw, dreg, value, count << 1); + + err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE, + rid, NULL); + + return err; +} +EXPORT_SYMBOL(hermes_write_ltv); + +static int __init init_hermes(void) +{ + return 0; +} + +static void __exit exit_hermes(void) +{ +} + +module_init(init_hermes); +module_exit(exit_hermes); diff --git a/drivers/net/wireless/orinoco/hermes.h b/drivers/net/wireless/orinoco/hermes.h new file mode 100644 index 000000000000..8b13c8fef3dc --- /dev/null +++ b/drivers/net/wireless/orinoco/hermes.h @@ -0,0 +1,494 @@ +/* hermes.h + * + * Driver core for the "Hermes" wireless MAC controller, as used in + * the Lucent Orinoco and Cabletron RoamAbout cards. It should also + * work on the hfa3841 and hfa3842 MAC controller chips used in the + * Prism I & II chipsets. + * + * This is not a complete driver, just low-level access routines for + * the MAC controller itself. + * + * Based on the prism2 driver from Absolute Value Systems' linux-wlan + * project, the Linux wvlan_cs driver, Lucent's HCF-Light + * (wvlan_hcf.c) library, and the NetBSD wireless driver. + * + * Copyright (C) 2000, David Gibson, Linuxcare Australia. + * (C) Copyright David Gibson, IBM Corp. 2001-2003. + * + * Portions taken from hfa384x.h, Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * + * This file distributed under the GPL, version 2. + */ + +#ifndef _HERMES_H +#define _HERMES_H + +/* Notes on locking: + * + * As a module of low level hardware access routines, there is no + * locking. Users of this module should ensure that they serialize + * access to the hermes_t structure, and to the hardware +*/ + +#include +#include + +/* + * Limits and constants + */ +#define HERMES_ALLOC_LEN_MIN (4) +#define HERMES_ALLOC_LEN_MAX (2400) +#define HERMES_LTV_LEN_MAX (34) +#define HERMES_BAP_DATALEN_MAX (4096) +#define HERMES_BAP_OFFSET_MAX (4096) +#define HERMES_PORTID_MAX (7) +#define HERMES_NUMPORTS_MAX (HERMES_PORTID_MAX+1) +#define HERMES_PDR_LEN_MAX (260) /* in bytes, from EK */ +#define HERMES_PDA_RECS_MAX (200) /* a guess */ +#define HERMES_PDA_LEN_MAX (1024) /* in bytes, from EK */ +#define HERMES_SCANRESULT_MAX (35) +#define HERMES_CHINFORESULT_MAX (8) +#define HERMES_MAX_MULTICAST (16) +#define HERMES_MAGIC (0x7d1f) + +/* + * Hermes register offsets + */ +#define HERMES_CMD (0x00) +#define HERMES_PARAM0 (0x02) +#define HERMES_PARAM1 (0x04) +#define HERMES_PARAM2 (0x06) +#define HERMES_STATUS (0x08) +#define HERMES_RESP0 (0x0A) +#define HERMES_RESP1 (0x0C) +#define HERMES_RESP2 (0x0E) +#define HERMES_INFOFID (0x10) +#define HERMES_RXFID (0x20) +#define HERMES_ALLOCFID (0x22) +#define HERMES_TXCOMPLFID (0x24) +#define HERMES_SELECT0 (0x18) +#define HERMES_OFFSET0 (0x1C) +#define HERMES_DATA0 (0x36) +#define HERMES_SELECT1 (0x1A) +#define HERMES_OFFSET1 (0x1E) +#define HERMES_DATA1 (0x38) +#define HERMES_EVSTAT (0x30) +#define HERMES_INTEN (0x32) +#define HERMES_EVACK (0x34) +#define HERMES_CONTROL (0x14) +#define HERMES_SWSUPPORT0 (0x28) +#define HERMES_SWSUPPORT1 (0x2A) +#define HERMES_SWSUPPORT2 (0x2C) +#define HERMES_AUXPAGE (0x3A) +#define HERMES_AUXOFFSET (0x3C) +#define HERMES_AUXDATA (0x3E) + +/* + * CMD register bitmasks + */ +#define HERMES_CMD_BUSY (0x8000) +#define HERMES_CMD_AINFO (0x7f00) +#define HERMES_CMD_MACPORT (0x0700) +#define HERMES_CMD_RECL (0x0100) +#define HERMES_CMD_WRITE (0x0100) +#define HERMES_CMD_PROGMODE (0x0300) +#define HERMES_CMD_CMDCODE (0x003f) + +/* + * STATUS register bitmasks + */ +#define HERMES_STATUS_RESULT (0x7f00) +#define HERMES_STATUS_CMDCODE (0x003f) + +/* + * OFFSET register bitmasks + */ +#define HERMES_OFFSET_BUSY (0x8000) +#define HERMES_OFFSET_ERR (0x4000) +#define HERMES_OFFSET_DATAOFF (0x0ffe) + +/* + * Event register bitmasks (INTEN, EVSTAT, EVACK) + */ +#define HERMES_EV_TICK (0x8000) +#define HERMES_EV_WTERR (0x4000) +#define HERMES_EV_INFDROP (0x2000) +#define HERMES_EV_INFO (0x0080) +#define HERMES_EV_DTIM (0x0020) +#define HERMES_EV_CMD (0x0010) +#define HERMES_EV_ALLOC (0x0008) +#define HERMES_EV_TXEXC (0x0004) +#define HERMES_EV_TX (0x0002) +#define HERMES_EV_RX (0x0001) + +/* + * Command codes + */ +/*--- Controller Commands ----------------------------*/ +#define HERMES_CMD_INIT (0x0000) +#define HERMES_CMD_ENABLE (0x0001) +#define HERMES_CMD_DISABLE (0x0002) +#define HERMES_CMD_DIAG (0x0003) + +/*--- Buffer Mgmt Commands ---------------------------*/ +#define HERMES_CMD_ALLOC (0x000A) +#define HERMES_CMD_TX (0x000B) + +/*--- Regulate Commands ------------------------------*/ +#define HERMES_CMD_NOTIFY (0x0010) +#define HERMES_CMD_INQUIRE (0x0011) + +/*--- Configure Commands -----------------------------*/ +#define HERMES_CMD_ACCESS (0x0021) +#define HERMES_CMD_DOWNLD (0x0022) + +/*--- Serial I/O Commands ----------------------------*/ +#define HERMES_CMD_READMIF (0x0030) +#define HERMES_CMD_WRITEMIF (0x0031) + +/*--- Debugging Commands -----------------------------*/ +#define HERMES_CMD_TEST (0x0038) + + +/* Test command arguments */ +#define HERMES_TEST_SET_CHANNEL 0x0800 +#define HERMES_TEST_MONITOR 0x0b00 +#define HERMES_TEST_STOP 0x0f00 + +/* Authentication algorithms */ +#define HERMES_AUTH_OPEN 1 +#define HERMES_AUTH_SHARED_KEY 2 + +/* WEP settings */ +#define HERMES_WEP_PRIVACY_INVOKED 0x0001 +#define HERMES_WEP_EXCL_UNENCRYPTED 0x0002 +#define HERMES_WEP_HOST_ENCRYPT 0x0010 +#define HERMES_WEP_HOST_DECRYPT 0x0080 + +/* Symbol hostscan options */ +#define HERMES_HOSTSCAN_SYMBOL_5SEC 0x0001 +#define HERMES_HOSTSCAN_SYMBOL_ONCE 0x0002 +#define HERMES_HOSTSCAN_SYMBOL_PASSIVE 0x0040 +#define HERMES_HOSTSCAN_SYMBOL_BCAST 0x0080 + +/* + * Frame structures and constants + */ + +#define HERMES_DESCRIPTOR_OFFSET 0 +#define HERMES_802_11_OFFSET (14) +#define HERMES_802_3_OFFSET (14+32) +#define HERMES_802_2_OFFSET (14+32+14) +#define HERMES_TXCNTL2_OFFSET (HERMES_802_3_OFFSET - 2) + +#define HERMES_RXSTAT_ERR (0x0003) +#define HERMES_RXSTAT_BADCRC (0x0001) +#define HERMES_RXSTAT_UNDECRYPTABLE (0x0002) +#define HERMES_RXSTAT_MIC (0x0010) /* Frame contains MIC */ +#define HERMES_RXSTAT_MACPORT (0x0700) +#define HERMES_RXSTAT_PCF (0x1000) /* Frame was received in CF period */ +#define HERMES_RXSTAT_MIC_KEY_ID (0x1800) /* MIC key used */ +#define HERMES_RXSTAT_MSGTYPE (0xE000) +#define HERMES_RXSTAT_1042 (0x2000) /* RFC-1042 frame */ +#define HERMES_RXSTAT_TUNNEL (0x4000) /* bridge-tunnel encoded frame */ +#define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */ + +/* Shift amount for key ID in RXSTAT and TXCTRL */ +#define HERMES_MIC_KEY_ID_SHIFT 11 + +struct hermes_tx_descriptor { + __le16 status; + __le16 reserved1; + __le16 reserved2; + __le32 sw_support; + u8 retry_count; + u8 tx_rate; + __le16 tx_control; +} __attribute__ ((packed)); + +#define HERMES_TXSTAT_RETRYERR (0x0001) +#define HERMES_TXSTAT_AGEDERR (0x0002) +#define HERMES_TXSTAT_DISCON (0x0004) +#define HERMES_TXSTAT_FORMERR (0x0008) + +#define HERMES_TXCTRL_TX_OK (0x0002) /* ?? interrupt on Tx complete */ +#define HERMES_TXCTRL_TX_EX (0x0004) /* ?? interrupt on Tx exception */ +#define HERMES_TXCTRL_802_11 (0x0008) /* We supply 802.11 header */ +#define HERMES_TXCTRL_MIC (0x0010) /* 802.3 + TKIP */ +#define HERMES_TXCTRL_MIC_KEY_ID (0x1800) /* MIC Key ID mask */ +#define HERMES_TXCTRL_ALT_RTRY (0x0020) + +/* Inquiry constants and data types */ + +#define HERMES_INQ_TALLIES (0xF100) +#define HERMES_INQ_SCAN (0xF101) +#define HERMES_INQ_CHANNELINFO (0xF102) +#define HERMES_INQ_HOSTSCAN (0xF103) +#define HERMES_INQ_HOSTSCAN_SYMBOL (0xF104) +#define HERMES_INQ_LINKSTATUS (0xF200) +#define HERMES_INQ_SEC_STAT_AGERE (0xF202) + +struct hermes_tallies_frame { + __le16 TxUnicastFrames; + __le16 TxMulticastFrames; + __le16 TxFragments; + __le16 TxUnicastOctets; + __le16 TxMulticastOctets; + __le16 TxDeferredTransmissions; + __le16 TxSingleRetryFrames; + __le16 TxMultipleRetryFrames; + __le16 TxRetryLimitExceeded; + __le16 TxDiscards; + __le16 RxUnicastFrames; + __le16 RxMulticastFrames; + __le16 RxFragments; + __le16 RxUnicastOctets; + __le16 RxMulticastOctets; + __le16 RxFCSErrors; + __le16 RxDiscards_NoBuffer; + __le16 TxDiscardsWrongSA; + __le16 RxWEPUndecryptable; + __le16 RxMsgInMsgFragments; + __le16 RxMsgInBadMsgFragments; + /* Those last are probably not available in very old firmwares */ + __le16 RxDiscards_WEPICVError; + __le16 RxDiscards_WEPExcluded; +} __attribute__ ((packed)); + +/* Grabbed from wlan-ng - Thanks Mark... - Jean II + * This is the result of a scan inquiry command */ +/* Structure describing info about an Access Point */ +struct prism2_scan_apinfo { + __le16 channel; /* Channel where the AP sits */ + __le16 noise; /* Noise level */ + __le16 level; /* Signal level */ + u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ + __le16 beacon_interv; /* Beacon interval */ + __le16 capabilities; /* Capabilities */ + __le16 essid_len; /* ESSID length */ + u8 essid[32]; /* ESSID of the network */ + u8 rates[10]; /* Bit rate supported */ + __le16 proberesp_rate; /* Data rate of the response frame */ + __le16 atim; /* ATIM window time, Kus (hostscan only) */ +} __attribute__ ((packed)); + +/* Same stuff for the Lucent/Agere card. + * Thanks to h1kari - Jean II */ +struct agere_scan_apinfo { + __le16 channel; /* Channel where the AP sits */ + __le16 noise; /* Noise level */ + __le16 level; /* Signal level */ + u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ + __le16 beacon_interv; /* Beacon interval */ + __le16 capabilities; /* Capabilities */ + /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ + __le16 essid_len; /* ESSID length */ + u8 essid[32]; /* ESSID of the network */ +} __attribute__ ((packed)); + +/* Moustafa: Scan structure for Symbol cards */ +struct symbol_scan_apinfo { + u8 channel; /* Channel where the AP sits */ + u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */ + __le16 noise; /* Noise level */ + __le16 level; /* Signal level */ + u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */ + __le16 beacon_interv; /* Beacon interval */ + __le16 capabilities; /* Capabilities */ + /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ + __le16 essid_len; /* ESSID length */ + u8 essid[32]; /* ESSID of the network */ + __le16 rates[5]; /* Bit rate supported */ + __le16 basic_rates; /* Basic rates bitmask */ + u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */ + u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */ +} __attribute__ ((packed)); + +union hermes_scan_info { + struct agere_scan_apinfo a; + struct prism2_scan_apinfo p; + struct symbol_scan_apinfo s; +}; + +/* Extended scan struct for HERMES_INQ_CHANNELINFO. + * wl_lkm calls this an ACS scan (Automatic Channel Select). + * Keep out of union hermes_scan_info because it is much bigger than + * the older scan structures. */ +struct agere_ext_scan_info { + __le16 reserved0; + + u8 noise; + u8 level; + u8 rx_flow; + u8 rate; + __le16 reserved1[2]; + + __le16 frame_control; + __le16 dur_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 bssid[ETH_ALEN]; + __le16 sequence; + u8 addr4[ETH_ALEN]; + + __le16 data_length; + + /* Next 3 fields do not get filled in. */ + u8 daddr[ETH_ALEN]; + u8 saddr[ETH_ALEN]; + __le16 len_type; + + __le64 timestamp; + __le16 beacon_interval; + __le16 capabilities; + u8 data[316]; +} __attribute__ ((packed)); + +#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000) +#define HERMES_LINKSTATUS_CONNECTED (0x0001) +#define HERMES_LINKSTATUS_DISCONNECTED (0x0002) +#define HERMES_LINKSTATUS_AP_CHANGE (0x0003) +#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004) +#define HERMES_LINKSTATUS_AP_IN_RANGE (0x0005) +#define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006) + +struct hermes_linkstatus { + __le16 linkstatus; /* Link status */ +} __attribute__ ((packed)); + +struct hermes_response { + u16 status, resp0, resp1, resp2; +}; + +/* "ID" structure - used for ESSID and station nickname */ +struct hermes_idstring { + __le16 len; + __le16 val[16]; +} __attribute__ ((packed)); + +struct hermes_multicast { + u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN]; +} __attribute__ ((packed)); + +/* Timeouts */ +#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */ + +/* Basic control structure */ +typedef struct hermes { + void __iomem *iobase; + int reg_spacing; +#define HERMES_16BIT_REGSPACING 0 +#define HERMES_32BIT_REGSPACING 1 + u16 inten; /* Which interrupts should be enabled? */ +} hermes_t; + +/* Register access convenience macros */ +#define hermes_read_reg(hw, off) \ + (ioread16((hw)->iobase + ( (off) << (hw)->reg_spacing ))) +#define hermes_write_reg(hw, off, val) \ + (iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing))) +#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name) +#define hermes_write_regn(hw, name, val) hermes_write_reg((hw), HERMES_##name, (val)) + +/* Function prototypes */ +void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing); +int hermes_init(hermes_t *hw); +int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, + struct hermes_response *resp); +int hermes_doicmd_wait(hermes_t *hw, u16 cmd, + u16 parm0, u16 parm1, u16 parm2, + struct hermes_response *resp); +int hermes_allocate(hermes_t *hw, u16 size, u16 *fid); + +int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, + u16 id, u16 offset); +int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, + u16 id, u16 offset); +int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen, + u16 *length, void *buf); +int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, + u16 length, const void *value); + +/* Inline functions */ + +static inline int hermes_present(hermes_t *hw) +{ + return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC; +} + +static inline void hermes_set_irqmask(hermes_t *hw, u16 events) +{ + hw->inten = events; + hermes_write_regn(hw, INTEN, events); +} + +static inline int hermes_enable_port(hermes_t *hw, int port) +{ + return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8), + 0, NULL); +} + +static inline int hermes_disable_port(hermes_t *hw, int port) +{ + return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), + 0, NULL); +} + +/* Initiate an INQUIRE command (tallies or scan). The result will come as an + * information frame in __orinoco_ev_info() */ +static inline int hermes_inquire(hermes_t *hw, u16 rid) +{ + return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL); +} + +#define HERMES_BYTES_TO_RECLEN(n) ( (((n)+1)/2) + 1 ) +#define HERMES_RECLEN_TO_BYTES(n) ( ((n)-1) * 2 ) + +/* Note that for the next two, the count is in 16-bit words, not bytes */ +static inline void hermes_read_words(struct hermes *hw, int off, void *buf, unsigned count) +{ + off = off << hw->reg_spacing; + ioread16_rep(hw->iobase + off, buf, count); +} + +static inline void hermes_write_bytes(struct hermes *hw, int off, + const char *buf, unsigned count) +{ + off = off << hw->reg_spacing; + iowrite16_rep(hw->iobase + off, buf, count >> 1); + if (unlikely(count & 1)) + iowrite8(buf[count - 1], hw->iobase + off); +} + +static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count) +{ + unsigned i; + + off = off << hw->reg_spacing; + + for (i = 0; i < count; i++) + iowrite16(0, hw->iobase + off); +} + +#define HERMES_READ_RECORD(hw, bap, rid, buf) \ + (hermes_read_ltv((hw),(bap),(rid), sizeof(*buf), NULL, (buf))) +#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \ + (hermes_write_ltv((hw),(bap),(rid),HERMES_BYTES_TO_RECLEN(sizeof(*buf)),(buf))) + +static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word) +{ + __le16 rec; + int err; + + err = HERMES_READ_RECORD(hw, bap, rid, &rec); + *word = le16_to_cpu(rec); + return err; +} + +static inline int hermes_write_wordrec(hermes_t *hw, int bap, u16 rid, u16 word) +{ + __le16 rec = cpu_to_le16(word); + return HERMES_WRITE_RECORD(hw, bap, rid, &rec); +} + +#endif /* _HERMES_H */ diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c new file mode 100644 index 000000000000..d8c626e61a3a --- /dev/null +++ b/drivers/net/wireless/orinoco/hermes_dld.c @@ -0,0 +1,730 @@ +/* + * Hermes download helper driver. + * + * This could be entirely merged into hermes.c. + * + * I'm keeping it separate to minimise the amount of merging between + * kernel upgrades. It also means the memory overhead for drivers that + * don't need firmware download low. + * + * This driver: + * - is capable of writing to the volatile area of the hermes device + * - is currently not capable of writing to non-volatile areas + * - provide helpers to identify and update plugin data + * - is not capable of interpreting a fw image directly. That is up to + * the main card driver. + * - deals with Hermes I devices. It can probably be modified to deal + * with Hermes II devices + * + * Copyright (C) 2007, David Kilroy + * + * Plug data code slightly modified from spectrum_cs driver + * Copyright (C) 2002-2005 Pavel Roskin + * Portions based on information in wl_lkm_718 Agere driver + * COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#include +#include +#include "hermes.h" +#include "hermes_dld.h" + +MODULE_DESCRIPTION("Download helper for Lucent Hermes chipset"); +MODULE_AUTHOR("David Kilroy "); +MODULE_LICENSE("Dual MPL/GPL"); + +#define PFX "hermes_dld: " + +/* + * AUX port access. To unlock the AUX port write the access keys to the + * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL + * register. Then read it and make sure it's HERMES_AUX_ENABLED. + */ +#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ +#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ +#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ +#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */ + +#define HERMES_AUX_PW0 0xFE01 +#define HERMES_AUX_PW1 0xDC23 +#define HERMES_AUX_PW2 0xBA45 + +/* HERMES_CMD_DOWNLD */ +#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD) + +/* End markers used in dblocks */ +#define PDI_END 0x00000000 /* End of PDA */ +#define BLOCK_END 0xFFFFFFFF /* Last image block */ +#define TEXT_END 0x1A /* End of text header */ + +/* + * PDA == Production Data Area + * + * In principle, the max. size of the PDA is is 4096 words. Currently, + * however, only about 500 bytes of this area are used. + * + * Some USB implementations can't handle sizes in excess of 1016. Note + * that PDA is not actually used in those USB environments, but may be + * retrieved by common code. + */ +#define MAX_PDA_SIZE 1000 + +/* Limit the amout we try to download in a single shot. + * Size is in bytes. + */ +#define MAX_DL_SIZE 1024 +#define LIMIT_PROGRAM_SIZE 0 + +/* + * The following structures have little-endian fields denoted by + * the leading underscore. Don't access them directly - use inline + * functions defined below. + */ + +/* + * The binary image to be downloaded consists of series of data blocks. + * Each block has the following structure. + */ +struct dblock { + __le32 addr; /* adapter address where to write the block */ + __le16 len; /* length of the data only, in bytes */ + char data[0]; /* data to be written */ +} __attribute__ ((packed)); + +/* + * Plug Data References are located in in the image after the last data + * block. They refer to areas in the adapter memory where the plug data + * items with matching ID should be written. + */ +struct pdr { + __le32 id; /* record ID */ + __le32 addr; /* adapter address where to write the data */ + __le32 len; /* expected length of the data, in bytes */ + char next[0]; /* next PDR starts here */ +} __attribute__ ((packed)); + +/* + * Plug Data Items are located in the EEPROM read from the adapter by + * primary firmware. They refer to the device-specific data that should + * be plugged into the secondary firmware. + */ +struct pdi { + __le16 len; /* length of ID and data, in words */ + __le16 id; /* record ID */ + char data[0]; /* plug data */ +} __attribute__ ((packed)); + +/*** FW data block access functions ***/ + +static inline u32 +dblock_addr(const struct dblock *blk) +{ + return le32_to_cpu(blk->addr); +} + +static inline u32 +dblock_len(const struct dblock *blk) +{ + return le16_to_cpu(blk->len); +} + +/*** PDR Access functions ***/ + +static inline u32 +pdr_id(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->id); +} + +static inline u32 +pdr_addr(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->addr); +} + +static inline u32 +pdr_len(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->len); +} + +/*** PDI Access functions ***/ + +static inline u32 +pdi_id(const struct pdi *pdi) +{ + return le16_to_cpu(pdi->id); +} + +/* Return length of the data only, in bytes */ +static inline u32 +pdi_len(const struct pdi *pdi) +{ + return 2 * (le16_to_cpu(pdi->len) - 1); +} + +/*** Hermes AUX control ***/ + +static inline void +hermes_aux_setaddr(hermes_t *hw, u32 addr) +{ + hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); + hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); +} + +static inline int +hermes_aux_control(hermes_t *hw, int enabled) +{ + int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED; + int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE; + int i; + + /* Already open? */ + if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state) + return 0; + + hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); + hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); + hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); + hermes_write_reg(hw, HERMES_CONTROL, action); + + for (i = 0; i < 20; i++) { + udelay(10); + if (hermes_read_reg(hw, HERMES_CONTROL) == + desired_state) + return 0; + } + + return -EBUSY; +} + +/*** Plug Data Functions ***/ + +/* + * Scan PDR for the record with the specified RECORD_ID. + * If it's not found, return NULL. + */ +static struct pdr * +hermes_find_pdr(struct pdr *first_pdr, u32 record_id) +{ + struct pdr *pdr = first_pdr; + void *end = (void *)first_pdr + MAX_PDA_SIZE; + + while (((void *)pdr < end) && + (pdr_id(pdr) != PDI_END)) { + /* + * PDR area is currently not terminated by PDI_END. + * It's followed by CRC records, which have the type + * field where PDR has length. The type can be 0 or 1. + */ + if (pdr_len(pdr) < 2) + return NULL; + + /* If the record ID matches, we are done */ + if (pdr_id(pdr) == record_id) + return pdr; + + pdr = (struct pdr *) pdr->next; + } + return NULL; +} + +/* Scan production data items for a particular entry */ +static struct pdi * +hermes_find_pdi(struct pdi *first_pdi, u32 record_id) +{ + struct pdi *pdi = first_pdi; + + while (pdi_id(pdi) != PDI_END) { + + /* If the record ID matches, we are done */ + if (pdi_id(pdi) == record_id) + return pdi; + + pdi = (struct pdi *) &pdi->data[pdi_len(pdi)]; + } + return NULL; +} + +/* Process one Plug Data Item - find corresponding PDR and plug it */ +static int +hermes_plug_pdi(hermes_t *hw, struct pdr *first_pdr, const struct pdi *pdi) +{ + struct pdr *pdr; + + /* Find the PDR corresponding to this PDI */ + pdr = hermes_find_pdr(first_pdr, pdi_id(pdi)); + + /* No match is found, safe to ignore */ + if (!pdr) + return 0; + + /* Lengths of the data in PDI and PDR must match */ + if (pdi_len(pdi) != pdr_len(pdr)) + return -EINVAL; + + /* do the actual plugging */ + hermes_aux_setaddr(hw, pdr_addr(pdr)); + hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi)); + + return 0; +} + +/* Read PDA from the adapter */ +int hermes_read_pda(hermes_t *hw, + __le16 *pda, + u32 pda_addr, + u16 pda_len, + int use_eeprom) /* can we get this into hw? */ +{ + int ret; + u16 pda_size; + u16 data_len = pda_len; + __le16 *data = pda; + + if (use_eeprom) { + /* PDA of spectrum symbol is in eeprom */ + + /* Issue command to read EEPROM */ + ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); + if (ret) + return ret; + } else { + /* wl_lkm does not include PDA size in the PDA area. + * We will pad the information into pda, so other routines + * don't have to be modified */ + pda[0] = cpu_to_le16(pda_len - 2); + /* Includes CFG_PROD_DATA but not itself */ + pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ + data_len = pda_len - 4; + data = pda + 2; + } + + /* Open auxiliary port */ + ret = hermes_aux_control(hw, 1); + printk(KERN_DEBUG PFX "AUX enable returned %d\n", ret); + if (ret) + return ret; + + /* read PDA from EEPROM */ + hermes_aux_setaddr(hw, pda_addr); + hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2); + + /* Close aux port */ + ret = hermes_aux_control(hw, 0); + printk(KERN_DEBUG PFX "AUX disable returned %d\n", ret); + + /* Check PDA length */ + pda_size = le16_to_cpu(pda[0]); + printk(KERN_DEBUG PFX "Actual PDA length %d, Max allowed %d\n", + pda_size, pda_len); + if (pda_size > pda_len) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL(hermes_read_pda); + +/* Parse PDA and write the records into the adapter + * + * Attempt to write every records that is in the specified pda + * which also has a valid production data record for the firmware. + */ +int hermes_apply_pda(hermes_t *hw, + const char *first_pdr, + const __le16 *pda) +{ + int ret; + const struct pdi *pdi; + struct pdr *pdr; + + pdr = (struct pdr *) first_pdr; + + /* Go through every PDI and plug them into the adapter */ + pdi = (const struct pdi *) (pda + 2); + while (pdi_id(pdi) != PDI_END) { + ret = hermes_plug_pdi(hw, pdr, pdi); + if (ret) + return ret; + + /* Increment to the next PDI */ + pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)]; + } + return 0; +} +EXPORT_SYMBOL(hermes_apply_pda); + +/* Identify the total number of bytes in all blocks + * including the header data. + */ +size_t +hermes_blocks_length(const char *first_block) +{ + const struct dblock *blk = (const struct dblock *) first_block; + int total_len = 0; + int len; + + /* Skip all blocks to locate Plug Data References + * (Spectrum CS) */ + while (dblock_addr(blk) != BLOCK_END) { + len = dblock_len(blk); + total_len += sizeof(*blk) + len; + blk = (struct dblock *) &blk->data[len]; + } + + return total_len; +} +EXPORT_SYMBOL(hermes_blocks_length); + +/*** Hermes programming ***/ + +/* About to start programming data (Hermes I) + * offset is the entry point + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +int hermesi_program_init(hermes_t *hw, u32 offset) +{ + int err; + + /* Disable interrupts?*/ + /*hw->inten = 0x0;*/ + /*hermes_write_regn(hw, INTEN, 0);*/ + /*hermes_set_irqmask(hw, 0);*/ + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Using doicmd_wait rather than docmd_wait */ + err = hermes_doicmd_wait(hw, + 0x0100 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hermes_doicmd_wait(hw, + 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hermes_aux_control(hw, 1); + printk(KERN_DEBUG PFX "AUX enable returned %d\n", err); + + if (err) + return err; + + printk(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset); + err = hermes_doicmd_wait(hw, + HERMES_PROGRAM_ENABLE_VOLATILE, + offset & 0xFFFFu, + offset >> 16, + 0, + NULL); + printk(KERN_DEBUG PFX "PROGRAM_ENABLE returned %d\n", + err); + + return err; +} +EXPORT_SYMBOL(hermesi_program_init); + +/* Done programming data (Hermes I) + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +int hermesi_program_end(hermes_t *hw) +{ + struct hermes_response resp; + int rc = 0; + int err; + + rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp); + + printk(KERN_DEBUG PFX "PROGRAM_DISABLE returned %d, " + "r0 0x%04x, r1 0x%04x, r2 0x%04x\n", + rc, resp.resp0, resp.resp1, resp.resp2); + + if ((rc == 0) && + ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD)) + rc = -EIO; + + err = hermes_aux_control(hw, 0); + printk(KERN_DEBUG PFX "AUX disable returned %d\n", err); + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Reinitialise, ignoring return */ + (void) hermes_doicmd_wait(hw, 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + + return rc ? rc : err; +} +EXPORT_SYMBOL(hermesi_program_end); + +/* Program the data blocks */ +int hermes_program(hermes_t *hw, const char *first_block, const char *end) +{ + const struct dblock *blk; + u32 blkaddr; + u32 blklen; +#if LIMIT_PROGRAM_SIZE + u32 addr; + u32 len; +#endif + + blk = (const struct dblock *) first_block; + + if ((const char *) blk > (end - sizeof(*blk))) + return -EIO; + + blkaddr = dblock_addr(blk); + blklen = dblock_len(blk); + + while ((blkaddr != BLOCK_END) && + (((const char *) blk + blklen) <= end)) { + printk(KERN_DEBUG PFX + "Programming block of length %d to address 0x%08x\n", + blklen, blkaddr); + +#if !LIMIT_PROGRAM_SIZE + /* wl_lkm driver splits this into writes of 2000 bytes */ + hermes_aux_setaddr(hw, blkaddr); + hermes_write_bytes(hw, HERMES_AUXDATA, blk->data, + blklen); +#else + len = (blklen < MAX_DL_SIZE) ? blklen : MAX_DL_SIZE; + addr = blkaddr; + + while (addr < (blkaddr + blklen)) { + printk(KERN_DEBUG PFX + "Programming subblock of length %d " + "to address 0x%08x. Data @ %p\n", + len, addr, &blk->data[addr - blkaddr]); + + hermes_aux_setaddr(hw, addr); + hermes_write_bytes(hw, HERMES_AUXDATA, + &blk->data[addr - blkaddr], + len); + + addr += len; + len = ((blkaddr + blklen - addr) < MAX_DL_SIZE) ? + (blkaddr + blklen - addr) : MAX_DL_SIZE; + } +#endif + blk = (const struct dblock *) &blk->data[blklen]; + + if ((const char *) blk > (end - sizeof(*blk))) + return -EIO; + + blkaddr = dblock_addr(blk); + blklen = dblock_len(blk); + } + return 0; +} +EXPORT_SYMBOL(hermes_program); + +static int __init init_hermes_dld(void) +{ + return 0; +} + +static void __exit exit_hermes_dld(void) +{ +} + +module_init(init_hermes_dld); +module_exit(exit_hermes_dld); + +/*** Default plugging data for Hermes I ***/ +/* Values from wl_lkm_718/hcf/dhf.c */ + +#define DEFINE_DEFAULT_PDR(pid, length, data) \ +static const struct { \ + __le16 len; \ + __le16 id; \ + u8 val[length]; \ +} __attribute__ ((packed)) default_pdr_data_##pid = { \ + __constant_cpu_to_le16((sizeof(default_pdr_data_##pid)/ \ + sizeof(__le16)) - 1), \ + __constant_cpu_to_le16(pid), \ + data \ +} + +#define DEFAULT_PDR(pid) default_pdr_data_##pid + +/* HWIF Compatiblity */ +DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00"); + +/* PPPPSign */ +DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00"); + +/* PPPPProf */ +DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00"); + +/* Antenna diversity */ +DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F"); + +/* Modem VCO band Set-up */ +DEFINE_DEFAULT_PDR(0x0160, 28, + "\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00"); + +/* Modem Rx Gain Table Values */ +DEFINE_DEFAULT_PDR(0x0161, 256, + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3F\01\x3F\x01\x3F\x01" + "\x3F\x01\x3E\01\x3E\x01\x3D\x01" + "\x3D\x01\x3C\01\x3C\x01\x3B\x01" + "\x3B\x01\x3A\01\x3A\x01\x39\x01" + "\x39\x01\x38\01\x38\x01\x37\x01" + "\x37\x01\x36\01\x36\x01\x35\x01" + "\x35\x01\x34\01\x34\x01\x33\x01" + "\x33\x01\x32\x01\x32\x01\x31\x01" + "\x31\x01\x30\x01\x30\x01\x7B\x01" + "\x7B\x01\x7A\x01\x7A\x01\x79\x01" + "\x79\x01\x78\x01\x78\x01\x77\x01" + "\x77\x01\x76\x01\x76\x01\x75\x01" + "\x75\x01\x74\x01\x74\x01\x73\x01" + "\x73\x01\x72\x01\x72\x01\x71\x01" + "\x71\x01\x70\x01\x70\x01\x68\x01" + "\x68\x01\x67\x01\x67\x01\x66\x01" + "\x66\x01\x65\x01\x65\x01\x57\x01" + "\x57\x01\x56\x01\x56\x01\x55\x01" + "\x55\x01\x54\x01\x54\x01\x53\x01" + "\x53\x01\x52\x01\x52\x01\x51\x01" + "\x51\x01\x50\x01\x50\x01\x48\x01" + "\x48\x01\x47\x01\x47\x01\x46\x01" + "\x46\x01\x45\x01\x45\x01\x44\x01" + "\x44\x01\x43\x01\x43\x01\x42\x01" + "\x42\x01\x41\x01\x41\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01" + "\x40\x01\x40\x01\x40\x01\x40\x01"); + +/* Write PDA according to certain rules. + * + * For every production data record, look for a previous setting in + * the pda, and use that. + * + * For certain records, use defaults if they are not found in pda. + */ +int hermes_apply_pda_with_defaults(hermes_t *hw, + const char *first_pdr, + const __le16 *pda) +{ + const struct pdr *pdr = (const struct pdr *) first_pdr; + struct pdi *first_pdi = (struct pdi *) &pda[2]; + struct pdi *pdi; + struct pdi *default_pdi = NULL; + struct pdi *outdoor_pdi; + void *end = (void *)first_pdr + MAX_PDA_SIZE; + int record_id; + + while (((void *)pdr < end) && + (pdr_id(pdr) != PDI_END)) { + /* + * For spectrum_cs firmwares, + * PDR area is currently not terminated by PDI_END. + * It's followed by CRC records, which have the type + * field where PDR has length. The type can be 0 or 1. + */ + if (pdr_len(pdr) < 2) + break; + record_id = pdr_id(pdr); + + pdi = hermes_find_pdi(first_pdi, record_id); + if (pdi) + printk(KERN_DEBUG PFX "Found record 0x%04x at %p\n", + record_id, pdi); + + switch (record_id) { + case 0x110: /* Modem REFDAC values */ + case 0x120: /* Modem VGDAC values */ + outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1); + default_pdi = NULL; + if (outdoor_pdi) { + pdi = outdoor_pdi; + printk(KERN_DEBUG PFX + "Using outdoor record 0x%04x at %p\n", + record_id + 1, pdi); + } + break; + case 0x5: /* HWIF Compatiblity */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005); + break; + case 0x108: /* PPPPSign */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108); + break; + case 0x109: /* PPPPProf */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109); + break; + case 0x150: /* Antenna diversity */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150); + break; + case 0x160: /* Modem VCO band Set-up */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160); + break; + case 0x161: /* Modem Rx Gain Table Values */ + default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161); + break; + default: + default_pdi = NULL; + break; + } + if (!pdi && default_pdi) { + /* Use default */ + pdi = default_pdi; + printk(KERN_DEBUG PFX + "Using default record 0x%04x at %p\n", + record_id, pdi); + } + + if (pdi) { + /* Lengths of the data in PDI and PDR must match */ + if (pdi_len(pdi) == pdr_len(pdr)) { + /* do the actual plugging */ + hermes_aux_setaddr(hw, pdr_addr(pdr)); + hermes_write_bytes(hw, HERMES_AUXDATA, + pdi->data, pdi_len(pdi)); + } + } + + pdr++; + } + return 0; +} +EXPORT_SYMBOL(hermes_apply_pda_with_defaults); diff --git a/drivers/net/wireless/orinoco/hermes_dld.h b/drivers/net/wireless/orinoco/hermes_dld.h new file mode 100644 index 000000000000..6fcb26277999 --- /dev/null +++ b/drivers/net/wireless/orinoco/hermes_dld.h @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2007, David Kilroy + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ +#ifndef _HERMES_DLD_H +#define _HERMES_DLD_H + +#include "hermes.h" + +int hermesi_program_init(hermes_t *hw, u32 offset); +int hermesi_program_end(hermes_t *hw); +int hermes_program(hermes_t *hw, const char *first_block, const char *end); + +int hermes_read_pda(hermes_t *hw, + __le16 *pda, + u32 pda_addr, + u16 pda_len, + int use_eeprom); +int hermes_apply_pda(hermes_t *hw, + const char *first_pdr, + const __le16 *pda); +int hermes_apply_pda_with_defaults(hermes_t *hw, + const char *first_pdr, + const __le16 *pda); + +size_t hermes_blocks_length(const char *first_block); + +#endif /* _HERMES_DLD_H */ diff --git a/drivers/net/wireless/orinoco/hermes_rid.h b/drivers/net/wireless/orinoco/hermes_rid.h new file mode 100644 index 000000000000..42eb67dea1df --- /dev/null +++ b/drivers/net/wireless/orinoco/hermes_rid.h @@ -0,0 +1,165 @@ +#ifndef _HERMES_RID_H +#define _HERMES_RID_H + +/* + * Configuration RIDs + */ +#define HERMES_RID_CNFPORTTYPE 0xFC00 +#define HERMES_RID_CNFOWNMACADDR 0xFC01 +#define HERMES_RID_CNFDESIREDSSID 0xFC02 +#define HERMES_RID_CNFOWNCHANNEL 0xFC03 +#define HERMES_RID_CNFOWNSSID 0xFC04 +#define HERMES_RID_CNFOWNATIMWINDOW 0xFC05 +#define HERMES_RID_CNFSYSTEMSCALE 0xFC06 +#define HERMES_RID_CNFMAXDATALEN 0xFC07 +#define HERMES_RID_CNFWDSADDRESS 0xFC08 +#define HERMES_RID_CNFPMENABLED 0xFC09 +#define HERMES_RID_CNFPMEPS 0xFC0A +#define HERMES_RID_CNFMULTICASTRECEIVE 0xFC0B +#define HERMES_RID_CNFMAXSLEEPDURATION 0xFC0C +#define HERMES_RID_CNFPMHOLDOVERDURATION 0xFC0D +#define HERMES_RID_CNFOWNNAME 0xFC0E +#define HERMES_RID_CNFOWNDTIMPERIOD 0xFC10 +#define HERMES_RID_CNFWDSADDRESS1 0xFC11 +#define HERMES_RID_CNFWDSADDRESS2 0xFC12 +#define HERMES_RID_CNFWDSADDRESS3 0xFC13 +#define HERMES_RID_CNFWDSADDRESS4 0xFC14 +#define HERMES_RID_CNFWDSADDRESS5 0xFC15 +#define HERMES_RID_CNFWDSADDRESS6 0xFC16 +#define HERMES_RID_CNFMULTICASTPMBUFFERING 0xFC17 +#define HERMES_RID_CNFWEPENABLED_AGERE 0xFC20 +#define HERMES_RID_CNFAUTHENTICATION_AGERE 0xFC21 +#define HERMES_RID_CNFMANDATORYBSSID_SYMBOL 0xFC21 +#define HERMES_RID_CNFDROPUNENCRYPTED 0xFC22 +#define HERMES_RID_CNFWEPDEFAULTKEYID 0xFC23 +#define HERMES_RID_CNFDEFAULTKEY0 0xFC24 +#define HERMES_RID_CNFDEFAULTKEY1 0xFC25 +#define HERMES_RID_CNFMWOROBUST_AGERE 0xFC25 +#define HERMES_RID_CNFDEFAULTKEY2 0xFC26 +#define HERMES_RID_CNFDEFAULTKEY3 0xFC27 +#define HERMES_RID_CNFWEPFLAGS_INTERSIL 0xFC28 +#define HERMES_RID_CNFWEPKEYMAPPINGTABLE 0xFC29 +#define HERMES_RID_CNFAUTHENTICATION 0xFC2A +#define HERMES_RID_CNFMAXASSOCSTA 0xFC2B +#define HERMES_RID_CNFKEYLENGTH_SYMBOL 0xFC2B +#define HERMES_RID_CNFTXCONTROL 0xFC2C +#define HERMES_RID_CNFROAMINGMODE 0xFC2D +#define HERMES_RID_CNFHOSTAUTHENTICATION 0xFC2E +#define HERMES_RID_CNFRCVCRCERROR 0xFC30 +#define HERMES_RID_CNFMMLIFE 0xFC31 +#define HERMES_RID_CNFALTRETRYCOUNT 0xFC32 +#define HERMES_RID_CNFBEACONINT 0xFC33 +#define HERMES_RID_CNFAPPCFINFO 0xFC34 +#define HERMES_RID_CNFSTAPCFINFO 0xFC35 +#define HERMES_RID_CNFPRIORITYQUSAGE 0xFC37 +#define HERMES_RID_CNFTIMCTRL 0xFC40 +#define HERMES_RID_CNFTHIRTY2TALLY 0xFC42 +#define HERMES_RID_CNFENHSECURITY 0xFC43 +#define HERMES_RID_CNFGROUPADDRESSES 0xFC80 +#define HERMES_RID_CNFCREATEIBSS 0xFC81 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD 0xFC82 +#define HERMES_RID_CNFRTSTHRESHOLD 0xFC83 +#define HERMES_RID_CNFTXRATECONTROL 0xFC84 +#define HERMES_RID_CNFPROMISCUOUSMODE 0xFC85 +#define HERMES_RID_CNFBASICRATES_SYMBOL 0xFC8A +#define HERMES_RID_CNFPREAMBLE_SYMBOL 0xFC8C +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD0 0xFC90 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD1 0xFC91 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD2 0xFC92 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD3 0xFC93 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD4 0xFC94 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD5 0xFC95 +#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD6 0xFC96 +#define HERMES_RID_CNFRTSTHRESHOLD0 0xFC97 +#define HERMES_RID_CNFRTSTHRESHOLD1 0xFC98 +#define HERMES_RID_CNFRTSTHRESHOLD2 0xFC99 +#define HERMES_RID_CNFRTSTHRESHOLD3 0xFC9A +#define HERMES_RID_CNFRTSTHRESHOLD4 0xFC9B +#define HERMES_RID_CNFRTSTHRESHOLD5 0xFC9C +#define HERMES_RID_CNFRTSTHRESHOLD6 0xFC9D +#define HERMES_RID_CNFHOSTSCAN_SYMBOL 0xFCAB +#define HERMES_RID_CNFSHORTPREAMBLE 0xFCB0 +#define HERMES_RID_CNFWEPKEYS_AGERE 0xFCB0 +#define HERMES_RID_CNFEXCLUDELONGPREAMBLE 0xFCB1 +#define HERMES_RID_CNFTXKEY_AGERE 0xFCB1 +#define HERMES_RID_CNFAUTHENTICATIONRSPTO 0xFCB2 +#define HERMES_RID_CNFSCANSSID_AGERE 0xFCB2 +#define HERMES_RID_CNFBASICRATES 0xFCB3 +#define HERMES_RID_CNFSUPPORTEDRATES 0xFCB4 +#define HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE 0xFCB4 +#define HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE 0xFCB5 +#define HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE 0xFCB6 +#define HERMES_RID_CNFADDMAPPEDTKIPKEY_AGERE 0xFCB7 +#define HERMES_RID_CNFREMMAPPEDTKIPKEY_AGERE 0xFCB8 +#define HERMES_RID_CNFSETWPACAPABILITIES_AGERE 0xFCB9 +#define HERMES_RID_CNFCACHEDPMKADDRESS 0xFCBA +#define HERMES_RID_CNFREMOVEPMKADDRESS 0xFCBB +#define HERMES_RID_CNFSCANCHANNELS2GHZ 0xFCC2 +#define HERMES_RID_CNFDISASSOCIATE 0xFCC8 +#define HERMES_RID_CNFTICKTIME 0xFCE0 +#define HERMES_RID_CNFSCANREQUEST 0xFCE1 +#define HERMES_RID_CNFJOINREQUEST 0xFCE2 +#define HERMES_RID_CNFAUTHENTICATESTATION 0xFCE3 +#define HERMES_RID_CNFCHANNELINFOREQUEST 0xFCE4 +#define HERMES_RID_CNFHOSTSCAN 0xFCE5 + +/* + * Information RIDs + */ +#define HERMES_RID_MAXLOADTIME 0xFD00 +#define HERMES_RID_DOWNLOADBUFFER 0xFD01 +#define HERMES_RID_PRIID 0xFD02 +#define HERMES_RID_PRISUPRANGE 0xFD03 +#define HERMES_RID_CFIACTRANGES 0xFD04 +#define HERMES_RID_NICSERNUM 0xFD0A +#define HERMES_RID_NICID 0xFD0B +#define HERMES_RID_MFISUPRANGE 0xFD0C +#define HERMES_RID_CFISUPRANGE 0xFD0D +#define HERMES_RID_CHANNELLIST 0xFD10 +#define HERMES_RID_REGULATORYDOMAINS 0xFD11 +#define HERMES_RID_TEMPTYPE 0xFD12 +#define HERMES_RID_CIS 0xFD13 +#define HERMES_RID_STAID 0xFD20 +#define HERMES_RID_STASUPRANGE 0xFD21 +#define HERMES_RID_MFIACTRANGES 0xFD22 +#define HERMES_RID_CFIACTRANGES2 0xFD23 +#define HERMES_RID_SECONDARYVERSION_SYMBOL 0xFD24 +#define HERMES_RID_PORTSTATUS 0xFD40 +#define HERMES_RID_CURRENTSSID 0xFD41 +#define HERMES_RID_CURRENTBSSID 0xFD42 +#define HERMES_RID_COMMSQUALITY 0xFD43 +#define HERMES_RID_CURRENTTXRATE 0xFD44 +#define HERMES_RID_CURRENTBEACONINTERVAL 0xFD45 +#define HERMES_RID_CURRENTSCALETHRESHOLDS 0xFD46 +#define HERMES_RID_PROTOCOLRSPTIME 0xFD47 +#define HERMES_RID_SHORTRETRYLIMIT 0xFD48 +#define HERMES_RID_LONGRETRYLIMIT 0xFD49 +#define HERMES_RID_MAXTRANSMITLIFETIME 0xFD4A +#define HERMES_RID_MAXRECEIVELIFETIME 0xFD4B +#define HERMES_RID_CFPOLLABLE 0xFD4C +#define HERMES_RID_AUTHENTICATIONALGORITHMS 0xFD4D +#define HERMES_RID_PRIVACYOPTIONIMPLEMENTED 0xFD4F +#define HERMES_RID_DBMCOMMSQUALITY_INTERSIL 0xFD51 +#define HERMES_RID_CURRENTTXRATE1 0xFD80 +#define HERMES_RID_CURRENTTXRATE2 0xFD81 +#define HERMES_RID_CURRENTTXRATE3 0xFD82 +#define HERMES_RID_CURRENTTXRATE4 0xFD83 +#define HERMES_RID_CURRENTTXRATE5 0xFD84 +#define HERMES_RID_CURRENTTXRATE6 0xFD85 +#define HERMES_RID_OWNMACADDR 0xFD86 +#define HERMES_RID_SCANRESULTSTABLE 0xFD88 +#define HERMES_RID_CURRENT_COUNTRY_INFO 0xFD89 +#define HERMES_RID_CURRENT_WPA_IE 0xFD8A +#define HERMES_RID_CURRENT_TKIP_IV 0xFD8B +#define HERMES_RID_CURRENT_ASSOC_REQ_INFO 0xFD8C +#define HERMES_RID_CURRENT_ASSOC_RESP_INFO 0xFD8D +#define HERMES_RID_TXQUEUEEMPTY 0xFD91 +#define HERMES_RID_PHYTYPE 0xFDC0 +#define HERMES_RID_CURRENTCHANNEL 0xFDC1 +#define HERMES_RID_CURRENTPOWERSTATE 0xFDC2 +#define HERMES_RID_CCAMODE 0xFDC3 +#define HERMES_RID_SUPPORTEDDATARATES 0xFDC6 +#define HERMES_RID_BUILDSEQ 0xFFFE +#define HERMES_RID_FWID 0xFFFF + +#endif diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c new file mode 100644 index 000000000000..f4ea08f96970 --- /dev/null +++ b/drivers/net/wireless/orinoco/orinoco.c @@ -0,0 +1,6032 @@ +/* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c) + * + * A driver for Hermes or Prism 2 chipset based PCMCIA wireless + * adaptors, with Lucent/Agere, Intersil or Symbol firmware. + * + * Current maintainers (as of 29 September 2003) are: + * Pavel Roskin + * and David Gibson + * + * (C) Copyright David Gibson, IBM Corporation 2001-2003. + * Copyright (C) 2000 David Gibson, Linuxcare Australia. + * With some help from : + * Copyright (C) 2001 Jean Tourrilhes, HP Labs + * Copyright (C) 2001 Benjamin Herrenschmidt + * + * Based on dummy_cs.c 1.27 2000/06/12 21:27:25 + * + * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus + * http://www.stud.fh-dortmund.de/~andy/wvlan/ + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * . Portions created by David + * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights + * Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. */ + +/* + * TODO + * o Handle de-encapsulation within network layer, provide 802.11 + * headers (patch from Thomas 'Dent' Mirlacher) + * o Fix possible races in SPY handling. + * o Disconnect wireless extensions from fundamental configuration. + * o (maybe) Software WEP support (patch from Stano Meduna). + * o (maybe) Use multiple Tx buffers - driver handling queue + * rather than firmware. + */ + +/* Locking and synchronization: + * + * The basic principle is that everything is serialized through a + * single spinlock, priv->lock. The lock is used in user, bh and irq + * context, so when taken outside hardirq context it should always be + * taken with interrupts disabled. The lock protects both the + * hardware and the struct orinoco_private. + * + * Another flag, priv->hw_unavailable indicates that the hardware is + * unavailable for an extended period of time (e.g. suspended, or in + * the middle of a hard reset). This flag is protected by the + * spinlock. All code which touches the hardware should check the + * flag after taking the lock, and if it is set, give up on whatever + * they are doing and drop the lock again. The orinoco_lock() + * function handles this (it unlocks and returns -EBUSY if + * hw_unavailable is non-zero). + */ + +#define DRIVER_NAME "orinoco" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "hermes_rid.h" +#include "hermes_dld.h" +#include "orinoco.h" + +/********************************************************************/ +/* Module information */ +/********************************************************************/ + +MODULE_AUTHOR("Pavel Roskin & David Gibson "); +MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards"); +MODULE_LICENSE("Dual MPL/GPL"); + +/* Level of debugging. Used in the macros in orinoco.h */ +#ifdef ORINOCO_DEBUG +int orinoco_debug = ORINOCO_DEBUG; +module_param(orinoco_debug, int, 0644); +MODULE_PARM_DESC(orinoco_debug, "Debug level"); +EXPORT_SYMBOL(orinoco_debug); +#endif + +static int suppress_linkstatus; /* = 0 */ +module_param(suppress_linkstatus, bool, 0644); +MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); +static int ignore_disconnect; /* = 0 */ +module_param(ignore_disconnect, int, 0644); +MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer"); + +static int force_monitor; /* = 0 */ +module_param(force_monitor, int, 0644); +MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions"); + +/********************************************************************/ +/* Compile time configuration and compatibility stuff */ +/********************************************************************/ + +/* We do this this way to avoid ifdefs in the actual code */ +#ifdef WIRELESS_SPY +#define SPY_NUMBER(priv) (priv->spy_data.spy_number) +#else +#define SPY_NUMBER(priv) 0 +#endif /* WIRELESS_SPY */ + +/********************************************************************/ +/* Internal constants */ +/********************************************************************/ + +/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ +static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; +#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) + +#define ORINOCO_MIN_MTU 256 +#define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD) + +#define SYMBOL_MAX_VER_LEN (14) +#define USER_BAP 0 +#define IRQ_BAP 1 +#define MAX_IRQLOOPS_PER_IRQ 10 +#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of + * how many events the + * device could + * legitimately generate */ +#define SMALL_KEY_SIZE 5 +#define LARGE_KEY_SIZE 13 +#define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */ + +#define DUMMY_FID 0xFFFF + +/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \ + HERMES_MAX_MULTICAST : 0)*/ +#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST) + +#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \ + | HERMES_EV_TX | HERMES_EV_TXEXC \ + | HERMES_EV_WTERR | HERMES_EV_INFO \ + | HERMES_EV_INFDROP ) + +#define MAX_RID_LEN 1024 + +static const struct iw_handler_def orinoco_handler_def; +static const struct ethtool_ops orinoco_ethtool_ops; + +/********************************************************************/ +/* Data tables */ +/********************************************************************/ + +/* The frequency of each channel in MHz */ +static const long channel_frequency[] = { + 2412, 2417, 2422, 2427, 2432, 2437, 2442, + 2447, 2452, 2457, 2462, 2467, 2472, 2484 +}; +#define NUM_CHANNELS ARRAY_SIZE(channel_frequency) + +/* This tables gives the actual meanings of the bitrate IDs returned + * by the firmware. */ +static struct { + int bitrate; /* in 100s of kilobits */ + int automatic; + u16 agere_txratectrl; + u16 intersil_txratectrl; +} bitrate_table[] = { + {110, 1, 3, 15}, /* Entry 0 is the default */ + {10, 0, 1, 1}, + {10, 1, 1, 1}, + {20, 0, 2, 2}, + {20, 1, 6, 3}, + {55, 0, 4, 4}, + {55, 1, 7, 7}, + {110, 0, 5, 8}, +}; +#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table) + +/********************************************************************/ +/* Data types */ +/********************************************************************/ + +/* Beginning of the Tx descriptor, used in TxExc handling */ +struct hermes_txexc_data { + struct hermes_tx_descriptor desc; + __le16 frame_ctl; + __le16 duration_id; + u8 addr1[ETH_ALEN]; +} __attribute__ ((packed)); + +/* Rx frame header except compatibility 802.3 header */ +struct hermes_rx_descriptor { + /* Control */ + __le16 status; + __le32 time; + u8 silence; + u8 signal; + u8 rate; + u8 rxflow; + __le32 reserved; + + /* 802.11 header */ + __le16 frame_ctl; + __le16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + __le16 seq_ctl; + u8 addr4[ETH_ALEN]; + + /* Data length */ + __le16 data_len; +} __attribute__ ((packed)); + +/********************************************************************/ +/* Function prototypes */ +/********************************************************************/ + +static int __orinoco_program_rids(struct net_device *dev); +static void __orinoco_set_multicast_list(struct net_device *dev); + +/********************************************************************/ +/* Michael MIC crypto setup */ +/********************************************************************/ +#define MICHAEL_MIC_LEN 8 +static int orinoco_mic_init(struct orinoco_private *priv) +{ + priv->tx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); + if (IS_ERR(priv->tx_tfm_mic)) { + printk(KERN_DEBUG "orinoco_mic_init: could not allocate " + "crypto API michael_mic\n"); + priv->tx_tfm_mic = NULL; + return -ENOMEM; + } + + priv->rx_tfm_mic = crypto_alloc_hash("michael_mic", 0, 0); + if (IS_ERR(priv->rx_tfm_mic)) { + printk(KERN_DEBUG "orinoco_mic_init: could not allocate " + "crypto API michael_mic\n"); + priv->rx_tfm_mic = NULL; + return -ENOMEM; + } + + return 0; +} + +static void orinoco_mic_free(struct orinoco_private *priv) +{ + if (priv->tx_tfm_mic) + crypto_free_hash(priv->tx_tfm_mic); + if (priv->rx_tfm_mic) + crypto_free_hash(priv->rx_tfm_mic); +} + +static int michael_mic(struct crypto_hash *tfm_michael, u8 *key, + u8 *da, u8 *sa, u8 priority, + u8 *data, size_t data_len, u8 *mic) +{ + struct hash_desc desc; + struct scatterlist sg[2]; + u8 hdr[ETH_HLEN + 2]; /* size of header + padding */ + + if (tfm_michael == NULL) { + printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n"); + return -1; + } + + /* Copy header into buffer. We need the padding on the end zeroed */ + memcpy(&hdr[0], da, ETH_ALEN); + memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN); + hdr[ETH_ALEN*2] = priority; + hdr[ETH_ALEN*2+1] = 0; + hdr[ETH_ALEN*2+2] = 0; + hdr[ETH_ALEN*2+3] = 0; + + /* Use scatter gather to MIC header and data in one go */ + sg_init_table(sg, 2); + sg_set_buf(&sg[0], hdr, sizeof(hdr)); + sg_set_buf(&sg[1], data, data_len); + + if (crypto_hash_setkey(tfm_michael, key, MIC_KEYLEN)) + return -1; + + desc.tfm = tfm_michael; + desc.flags = 0; + return crypto_hash_digest(&desc, sg, data_len + sizeof(hdr), + mic); +} + +/********************************************************************/ +/* Internal helper functions */ +/********************************************************************/ + +static inline void set_port_type(struct orinoco_private *priv) +{ + switch (priv->iw_mode) { + case IW_MODE_INFRA: + priv->port_type = 1; + priv->createibss = 0; + break; + case IW_MODE_ADHOC: + if (priv->prefer_port3) { + priv->port_type = 3; + priv->createibss = 0; + } else { + priv->port_type = priv->ibss_port; + priv->createibss = 1; + } + break; + case IW_MODE_MONITOR: + priv->port_type = 3; + priv->createibss = 0; + break; + default: + printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n", + priv->ndev->name); + } +} + +#define ORINOCO_MAX_BSS_COUNT 64 +static int orinoco_bss_data_allocate(struct orinoco_private *priv) +{ + if (priv->bss_xbss_data) + return 0; + + if (priv->has_ext_scan) + priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT * + sizeof(struct xbss_element), + GFP_KERNEL); + else + priv->bss_xbss_data = kzalloc(ORINOCO_MAX_BSS_COUNT * + sizeof(struct bss_element), + GFP_KERNEL); + + if (!priv->bss_xbss_data) { + printk(KERN_WARNING "Out of memory allocating beacons"); + return -ENOMEM; + } + return 0; +} + +static void orinoco_bss_data_free(struct orinoco_private *priv) +{ + kfree(priv->bss_xbss_data); + priv->bss_xbss_data = NULL; +} + +#define PRIV_BSS ((struct bss_element *)priv->bss_xbss_data) +#define PRIV_XBSS ((struct xbss_element *)priv->bss_xbss_data) +static void orinoco_bss_data_init(struct orinoco_private *priv) +{ + int i; + + INIT_LIST_HEAD(&priv->bss_free_list); + INIT_LIST_HEAD(&priv->bss_list); + if (priv->has_ext_scan) + for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++) + list_add_tail(&(PRIV_XBSS[i].list), + &priv->bss_free_list); + else + for (i = 0; i < ORINOCO_MAX_BSS_COUNT; i++) + list_add_tail(&(PRIV_BSS[i].list), + &priv->bss_free_list); + +} + +static inline u8 *orinoco_get_ie(u8 *data, size_t len, + enum ieee80211_eid eid) +{ + u8 *p = data; + while ((p + 2) < (data + len)) { + if (p[0] == eid) + return p; + p += p[1] + 2; + } + return NULL; +} + +#define WPA_OUI_TYPE "\x00\x50\xF2\x01" +#define WPA_SELECTOR_LEN 4 +static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len) +{ + u8 *p = data; + while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) { + if ((p[0] == WLAN_EID_GENERIC) && + (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0)) + return p; + p += p[1] + 2; + } + return NULL; +} + + +/********************************************************************/ +/* Download functionality */ +/********************************************************************/ + +struct fw_info { + char *pri_fw; + char *sta_fw; + char *ap_fw; + u32 pda_addr; + u16 pda_size; +}; + +const static struct fw_info orinoco_fw[] = { + { "", "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 }, + { "", "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 }, + { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", "", 0x00003100, 512 } +}; + +/* Structure used to access fields in FW + * Make sure LE decoding macros are used + */ +struct orinoco_fw_header { + char hdr_vers[6]; /* ASCII string for header version */ + __le16 headersize; /* Total length of header */ + __le32 entry_point; /* NIC entry point */ + __le32 blocks; /* Number of blocks to program */ + __le32 block_offset; /* Offset of block data from eof header */ + __le32 pdr_offset; /* Offset to PDR data from eof header */ + __le32 pri_offset; /* Offset to primary plug data */ + __le32 compat_offset; /* Offset to compatibility data*/ + char signature[0]; /* FW signature length headersize-20 */ +} __attribute__ ((packed)); + +/* Download either STA or AP firmware into the card. */ +static int +orinoco_dl_firmware(struct orinoco_private *priv, + const struct fw_info *fw, + int ap) +{ + /* Plug Data Area (PDA) */ + __le16 *pda; + + hermes_t *hw = &priv->hw; + const struct firmware *fw_entry; + const struct orinoco_fw_header *hdr; + const unsigned char *first_block; + const unsigned char *end; + const char *firmware; + struct net_device *dev = priv->ndev; + int err = 0; + + pda = kzalloc(fw->pda_size, GFP_KERNEL); + if (!pda) + return -ENOMEM; + + if (ap) + firmware = fw->ap_fw; + else + firmware = fw->sta_fw; + + printk(KERN_DEBUG "%s: Attempting to download firmware %s\n", + dev->name, firmware); + + /* Read current plug data */ + err = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 0); + printk(KERN_DEBUG "%s: Read PDA returned %d\n", dev->name, err); + if (err) + goto free; + + if (priv->cached_fw) + fw_entry = priv->cached_fw; + else { + err = request_firmware(&fw_entry, firmware, priv->dev); + if (err) { + printk(KERN_ERR "%s: Cannot find firmware %s\n", + dev->name, firmware); + err = -ENOENT; + goto free; + } + priv->cached_fw = fw_entry; + } + + hdr = (const struct orinoco_fw_header *) fw_entry->data; + + /* Enable aux port to allow programming */ + err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point)); + printk(KERN_DEBUG "%s: Program init returned %d\n", dev->name, err); + if (err != 0) + goto abort; + + /* Program data */ + first_block = (fw_entry->data + + le16_to_cpu(hdr->headersize) + + le32_to_cpu(hdr->block_offset)); + end = fw_entry->data + fw_entry->size; + + err = hermes_program(hw, first_block, end); + printk(KERN_DEBUG "%s: Program returned %d\n", dev->name, err); + if (err != 0) + goto abort; + + /* Update production data */ + first_block = (fw_entry->data + + le16_to_cpu(hdr->headersize) + + le32_to_cpu(hdr->pdr_offset)); + + err = hermes_apply_pda_with_defaults(hw, first_block, pda); + printk(KERN_DEBUG "%s: Apply PDA returned %d\n", dev->name, err); + if (err) + goto abort; + + /* Tell card we've finished */ + err = hermesi_program_end(hw); + printk(KERN_DEBUG "%s: Program end returned %d\n", dev->name, err); + if (err != 0) + goto abort; + + /* Check if we're running */ + printk(KERN_DEBUG "%s: hermes_present returned %d\n", + dev->name, hermes_present(hw)); + +abort: + /* In case of error, assume firmware was bogus and release it */ + if (err) { + priv->cached_fw = NULL; + release_firmware(fw_entry); + } + +free: + kfree(pda); + return err; +} + +/* End markers */ +#define TEXT_END 0x1A /* End of text header */ + +/* + * Process a firmware image - stop the card, load the firmware, reset + * the card and make sure it responds. For the secondary firmware take + * care of the PDA - read it and then write it on top of the firmware. + */ +static int +symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw, + const unsigned char *image, const unsigned char *end, + int secondary) +{ + hermes_t *hw = &priv->hw; + int ret = 0; + const unsigned char *ptr; + const unsigned char *first_block; + + /* Plug Data Area (PDA) */ + __le16 *pda = NULL; + + /* Binary block begins after the 0x1A marker */ + ptr = image; + while (*ptr++ != TEXT_END); + first_block = ptr; + + /* Read the PDA from EEPROM */ + if (secondary) { + pda = kzalloc(fw->pda_size, GFP_KERNEL); + if (!pda) + return -ENOMEM; + + ret = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 1); + if (ret) + goto free; + } + + /* Stop the firmware, so that it can be safely rewritten */ + if (priv->stop_fw) { + ret = priv->stop_fw(priv, 1); + if (ret) + goto free; + } + + /* Program the adapter with new firmware */ + ret = hermes_program(hw, first_block, end); + if (ret) + goto free; + + /* Write the PDA to the adapter */ + if (secondary) { + size_t len = hermes_blocks_length(first_block); + ptr = first_block + len; + ret = hermes_apply_pda(hw, ptr, pda); + kfree(pda); + if (ret) + return ret; + } + + /* Run the firmware */ + if (priv->stop_fw) { + ret = priv->stop_fw(priv, 0); + if (ret) + return ret; + } + + /* Reset hermes chip and make sure it responds */ + ret = hermes_init(hw); + + /* hermes_reset() should return 0 with the secondary firmware */ + if (secondary && ret != 0) + return -ENODEV; + + /* And this should work with any firmware */ + if (!hermes_present(hw)) + return -ENODEV; + + return 0; + +free: + kfree(pda); + return ret; +} + + +/* + * Download the firmware into the card, this also does a PCMCIA soft + * reset on the card, to make sure it's in a sane state. + */ +static int +symbol_dl_firmware(struct orinoco_private *priv, + const struct fw_info *fw) +{ + struct net_device *dev = priv->ndev; + int ret; + const struct firmware *fw_entry; + + if (request_firmware(&fw_entry, fw->pri_fw, + priv->dev) != 0) { + printk(KERN_ERR "%s: Cannot find firmware: %s\n", + dev->name, fw->pri_fw); + return -ENOENT; + } + + /* Load primary firmware */ + ret = symbol_dl_image(priv, fw, fw_entry->data, + fw_entry->data + fw_entry->size, 0); + release_firmware(fw_entry); + if (ret) { + printk(KERN_ERR "%s: Primary firmware download failed\n", + dev->name); + return ret; + } + + if (request_firmware(&fw_entry, fw->sta_fw, + priv->dev) != 0) { + printk(KERN_ERR "%s: Cannot find firmware: %s\n", + dev->name, fw->sta_fw); + return -ENOENT; + } + + /* Load secondary firmware */ + ret = symbol_dl_image(priv, fw, fw_entry->data, + fw_entry->data + fw_entry->size, 1); + release_firmware(fw_entry); + if (ret) { + printk(KERN_ERR "%s: Secondary firmware download failed\n", + dev->name); + } + + return ret; +} + +static int orinoco_download(struct orinoco_private *priv) +{ + int err = 0; + /* Reload firmware */ + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* case FIRMWARE_TYPE_INTERSIL: */ + err = orinoco_dl_firmware(priv, + &orinoco_fw[priv->firmware_type], 0); + break; + + case FIRMWARE_TYPE_SYMBOL: + err = symbol_dl_firmware(priv, + &orinoco_fw[priv->firmware_type]); + break; + case FIRMWARE_TYPE_INTERSIL: + break; + } + /* TODO: if we fail we probably need to reinitialise + * the driver */ + + return err; +} + +/********************************************************************/ +/* Device methods */ +/********************************************************************/ + +static int orinoco_open(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = __orinoco_up(dev); + + if (! err) + priv->open = 1; + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_stop(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + + /* We mustn't use orinoco_lock() here, because we need to be + able to close the interface even if hw_unavailable is set + (e.g. as we're released after a PC Card removal) */ + spin_lock_irq(&priv->lock); + + priv->open = 0; + + err = __orinoco_down(dev); + + spin_unlock_irq(&priv->lock); + + return err; +} + +static struct net_device_stats *orinoco_get_stats(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + + return &priv->stats; +} + +static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + struct iw_statistics *wstats = &priv->wstats; + int err; + unsigned long flags; + + if (! netif_device_present(dev)) { + printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n", + dev->name); + return NULL; /* FIXME: Can we do better than this? */ + } + + /* If busy, return the old stats. Returning NULL may cause + * the interface to disappear from /proc/net/wireless */ + if (orinoco_lock(priv, &flags) != 0) + return wstats; + + /* We can't really wait for the tallies inquiry command to + * complete, so we just use the previous results and trigger + * a new tallies inquiry command for next time - Jean II */ + /* FIXME: Really we should wait for the inquiry to come back - + * as it is the stats we give don't make a whole lot of sense. + * Unfortunately, it's not clear how to do that within the + * wireless extensions framework: I think we're in user + * context, but a lock seems to be held by the time we get in + * here so we're not safe to sleep here. */ + hermes_inquire(hw, HERMES_INQ_TALLIES); + + if (priv->iw_mode == IW_MODE_ADHOC) { + memset(&wstats->qual, 0, sizeof(wstats->qual)); + /* If a spy address is defined, we report stats of the + * first spy address - Jean II */ + if (SPY_NUMBER(priv)) { + wstats->qual.qual = priv->spy_data.spy_stat[0].qual; + wstats->qual.level = priv->spy_data.spy_stat[0].level; + wstats->qual.noise = priv->spy_data.spy_stat[0].noise; + wstats->qual.updated = priv->spy_data.spy_stat[0].updated; + } + } else { + struct { + __le16 qual, signal, noise, unused; + } __attribute__ ((packed)) cq; + + err = HERMES_READ_RECORD(hw, USER_BAP, + HERMES_RID_COMMSQUALITY, &cq); + + if (!err) { + wstats->qual.qual = (int)le16_to_cpu(cq.qual); + wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; + wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; + wstats->qual.updated = 7; + } + } + + orinoco_unlock(priv, &flags); + return wstats; +} + +static void orinoco_set_multicast_list(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) { + printk(KERN_DEBUG "%s: orinoco_set_multicast_list() " + "called when hw_unavailable\n", dev->name); + return; + } + + __orinoco_set_multicast_list(dev); + orinoco_unlock(priv, &flags); +} + +static int orinoco_change_mtu(struct net_device *dev, int new_mtu) +{ + struct orinoco_private *priv = netdev_priv(dev); + + if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) ) + return -EINVAL; + + /* MTU + encapsulation + header length */ + if ( (new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) > + (priv->nicbuf_size - ETH_HLEN) ) + return -EINVAL; + + dev->mtu = new_mtu; + + return 0; +} + +/********************************************************************/ +/* Tx path */ +/********************************************************************/ + +static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + hermes_t *hw = &priv->hw; + int err = 0; + u16 txfid = priv->txfid; + struct ethhdr *eh; + int tx_control; + unsigned long flags; + + if (! netif_running(dev)) { + printk(KERN_ERR "%s: Tx on stopped device!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (netif_queue_stopped(dev)) { + printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (orinoco_lock(priv, &flags) != 0) { + printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (! netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) { + /* Oops, the firmware hasn't established a connection, + silently drop the packet (this seems to be the + safest approach). */ + goto drop; + } + + /* Check packet length */ + if (skb->len < ETH_HLEN) + goto drop; + + tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX; + + if (priv->encode_alg == IW_ENCODE_ALG_TKIP) + tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) | + HERMES_TXCTRL_MIC; + + if (priv->has_alt_txcntl) { + /* WPA enabled firmwares have tx_cntl at the end of + * the 802.11 header. So write zeroed descriptor and + * 802.11 header at the same time + */ + char desc[HERMES_802_3_OFFSET]; + __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET]; + + memset(&desc, 0, sizeof(desc)); + + *txcntl = cpu_to_le16(tx_control); + err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), + txfid, 0); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing Tx " + "descriptor to BAP\n", dev->name, err); + goto busy; + } + } else { + struct hermes_tx_descriptor desc; + + memset(&desc, 0, sizeof(desc)); + + desc.tx_control = cpu_to_le16(tx_control); + err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), + txfid, 0); + if (err) { + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d writing Tx " + "descriptor to BAP\n", dev->name, err); + goto busy; + } + + /* Clear the 802.11 header and data length fields - some + * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused + * if this isn't done. */ + hermes_clear_words(hw, HERMES_DATA0, + HERMES_802_3_OFFSET - HERMES_802_11_OFFSET); + } + + eh = (struct ethhdr *)skb->data; + + /* Encapsulate Ethernet-II frames */ + if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ + struct header_struct { + struct ethhdr eth; /* 802.3 header */ + u8 encap[6]; /* 802.2 header */ + } __attribute__ ((packed)) hdr; + + /* Strip destination and source from the data */ + skb_pull(skb, 2 * ETH_ALEN); + + /* And move them to a separate header */ + memcpy(&hdr.eth, eh, 2 * ETH_ALEN); + hdr.eth.h_proto = htons(sizeof(encaps_hdr) + skb->len); + memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr)); + + /* Insert the SNAP header */ + if (skb_headroom(skb) < sizeof(hdr)) { + printk(KERN_ERR + "%s: Not enough headroom for 802.2 headers %d\n", + dev->name, skb_headroom(skb)); + goto drop; + } + eh = (struct ethhdr *) skb_push(skb, sizeof(hdr)); + memcpy(eh, &hdr, sizeof(hdr)); + } + + err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len, + txfid, HERMES_802_3_OFFSET); + if (err) { + printk(KERN_ERR "%s: Error %d writing packet to BAP\n", + dev->name, err); + goto busy; + } + + /* Calculate Michael MIC */ + if (priv->encode_alg == IW_ENCODE_ALG_TKIP) { + u8 mic_buf[MICHAEL_MIC_LEN + 1]; + u8 *mic; + size_t offset; + size_t len; + + if (skb->len % 2) { + /* MIC start is on an odd boundary */ + mic_buf[0] = skb->data[skb->len - 1]; + mic = &mic_buf[1]; + offset = skb->len - 1; + len = MICHAEL_MIC_LEN + 1; + } else { + mic = &mic_buf[0]; + offset = skb->len; + len = MICHAEL_MIC_LEN; + } + + michael_mic(priv->tx_tfm_mic, + priv->tkip_key[priv->tx_key].tx_mic, + eh->h_dest, eh->h_source, 0 /* priority */, + skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic); + + /* Write the MIC */ + err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len, + txfid, HERMES_802_3_OFFSET + offset); + if (err) { + printk(KERN_ERR "%s: Error %d writing MIC to BAP\n", + dev->name, err); + goto busy; + } + } + + /* Finally, we actually initiate the send */ + netif_stop_queue(dev); + + err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, + txfid, NULL); + if (err) { + netif_start_queue(dev); + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d transmitting packet\n", + dev->name, err); + goto busy; + } + + dev->trans_start = jiffies; + stats->tx_bytes += HERMES_802_3_OFFSET + skb->len; + goto ok; + + drop: + stats->tx_errors++; + stats->tx_dropped++; + + ok: + orinoco_unlock(priv, &flags); + dev_kfree_skb(skb); + return NETDEV_TX_OK; + + busy: + if (err == -EIO) + schedule_work(&priv->reset_work); + orinoco_unlock(priv, &flags); + return NETDEV_TX_BUSY; +} + +static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + u16 fid = hermes_read_regn(hw, ALLOCFID); + + if (fid != priv->txfid) { + if (fid != DUMMY_FID) + printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n", + dev->name, fid); + return; + } + + hermes_write_regn(hw, ALLOCFID, DUMMY_FID); +} + +static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + + stats->tx_packets++; + + netif_wake_queue(dev); + + hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); +} + +static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + u16 fid = hermes_read_regn(hw, TXCOMPLFID); + u16 status; + struct hermes_txexc_data hdr; + int err = 0; + + if (fid == DUMMY_FID) + return; /* Nothing's really happened */ + + /* Read part of the frame header - we need status and addr1 */ + err = hermes_bap_pread(hw, IRQ_BAP, &hdr, + sizeof(struct hermes_txexc_data), + fid, 0); + + hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); + stats->tx_errors++; + + if (err) { + printk(KERN_WARNING "%s: Unable to read descriptor on Tx error " + "(FID=%04X error %d)\n", + dev->name, fid, err); + return; + } + + DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name, + err, fid); + + /* We produce a TXDROP event only for retry or lifetime + * exceeded, because that's the only status that really mean + * that this particular node went away. + * Other errors means that *we* screwed up. - Jean II */ + status = le16_to_cpu(hdr.desc.status); + if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) { + union iwreq_data wrqu; + + /* Copy 802.11 dest address. + * We use the 802.11 header because the frame may + * not be 802.3 or may be mangled... + * In Ad-Hoc mode, it will be the node address. + * In managed mode, it will be most likely the AP addr + * User space will figure out how to convert it to + * whatever it needs (IP address or else). + * - Jean II */ + memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL); + } + + netif_wake_queue(dev); +} + +static void orinoco_tx_timeout(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct hermes *hw = &priv->hw; + + printk(KERN_WARNING "%s: Tx timeout! " + "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n", + dev->name, hermes_read_regn(hw, ALLOCFID), + hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT)); + + stats->tx_errors++; + + schedule_work(&priv->reset_work); +} + +/********************************************************************/ +/* Rx path (data frames) */ +/********************************************************************/ + +/* Does the frame have a SNAP header indicating it should be + * de-encapsulated to Ethernet-II? */ +static inline int is_ethersnap(void *_hdr) +{ + u8 *hdr = _hdr; + + /* We de-encapsulate all packets which, a) have SNAP headers + * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header + * and where b) the OUI of the SNAP header is 00:00:00 or + * 00:00:f8 - we need both because different APs appear to use + * different OUIs for some reason */ + return (memcmp(hdr, &encaps_hdr, 5) == 0) + && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) ); +} + +static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, + int level, int noise) +{ + struct iw_quality wstats; + wstats.level = level - 0x95; + wstats.noise = noise - 0x95; + wstats.qual = (level > noise) ? (level - noise) : 0; + wstats.updated = 7; + /* Update spy records */ + wireless_spy_update(dev, mac, &wstats); +} + +static void orinoco_stat_gather(struct net_device *dev, + struct sk_buff *skb, + struct hermes_rx_descriptor *desc) +{ + struct orinoco_private *priv = netdev_priv(dev); + + /* Using spy support with lots of Rx packets, like in an + * infrastructure (AP), will really slow down everything, because + * the MAC address must be compared to each entry of the spy list. + * If the user really asks for it (set some address in the + * spy list), we do it, but he will pay the price. + * Note that to get here, you need both WIRELESS_SPY + * compiled in AND some addresses in the list !!! + */ + /* Note : gcc will optimise the whole section away if + * WIRELESS_SPY is not defined... - Jean II */ + if (SPY_NUMBER(priv)) { + orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN, + desc->signal, desc->silence); + } +} + +/* + * orinoco_rx_monitor - handle received monitor frames. + * + * Arguments: + * dev network device + * rxfid received FID + * desc rx descriptor of the frame + * + * Call context: interrupt + */ +static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, + struct hermes_rx_descriptor *desc) +{ + u32 hdrlen = 30; /* return full header by default */ + u32 datalen = 0; + u16 fc; + int err; + int len; + struct sk_buff *skb; + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + hermes_t *hw = &priv->hw; + + len = le16_to_cpu(desc->data_len); + + /* Determine the size of the header and the data */ + fc = le16_to_cpu(desc->frame_ctl); + switch (fc & IEEE80211_FCTL_FTYPE) { + case IEEE80211_FTYPE_DATA: + if ((fc & IEEE80211_FCTL_TODS) + && (fc & IEEE80211_FCTL_FROMDS)) + hdrlen = 30; + else + hdrlen = 24; + datalen = len; + break; + case IEEE80211_FTYPE_MGMT: + hdrlen = 24; + datalen = len; + break; + case IEEE80211_FTYPE_CTL: + switch (fc & IEEE80211_FCTL_STYPE) { + case IEEE80211_STYPE_PSPOLL: + case IEEE80211_STYPE_RTS: + case IEEE80211_STYPE_CFEND: + case IEEE80211_STYPE_CFENDACK: + hdrlen = 16; + break; + case IEEE80211_STYPE_CTS: + case IEEE80211_STYPE_ACK: + hdrlen = 10; + break; + } + break; + default: + /* Unknown frame type */ + break; + } + + /* sanity check the length */ + if (datalen > IEEE80211_MAX_DATA_LEN + 12) { + printk(KERN_DEBUG "%s: oversized monitor frame, " + "data length = %d\n", dev->name, datalen); + stats->rx_length_errors++; + goto update_stats; + } + + skb = dev_alloc_skb(hdrlen + datalen); + if (!skb) { + printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n", + dev->name); + goto update_stats; + } + + /* Copy the 802.11 header to the skb */ + memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen); + skb_reset_mac_header(skb); + + /* If any, copy the data from the card to the skb */ + if (datalen > 0) { + err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen), + ALIGN(datalen, 2), rxfid, + HERMES_802_2_OFFSET); + if (err) { + printk(KERN_ERR "%s: error %d reading monitor frame\n", + dev->name, err); + goto drop; + } + } + + skb->dev = dev; + skb->ip_summed = CHECKSUM_NONE; + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = __constant_htons(ETH_P_802_2); + + stats->rx_packets++; + stats->rx_bytes += skb->len; + + netif_rx(skb); + return; + + drop: + dev_kfree_skb_irq(skb); + update_stats: + stats->rx_errors++; + stats->rx_dropped++; +} + +/* Get tsc from the firmware */ +static int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, + u8 *tsc) +{ + hermes_t *hw = &priv->hw; + int err = 0; + u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE]; + + if ((key < 0) || (key > 4)) + return -EINVAL; + + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, + sizeof(tsc_arr), NULL, &tsc_arr); + if (!err) + memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0])); + + return err; +} + +static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct iw_statistics *wstats = &priv->wstats; + struct sk_buff *skb = NULL; + u16 rxfid, status; + int length; + struct hermes_rx_descriptor *desc; + struct orinoco_rx_data *rx_data; + int err; + + desc = kmalloc(sizeof(*desc), GFP_ATOMIC); + if (!desc) { + printk(KERN_WARNING + "%s: Can't allocate space for RX descriptor\n", + dev->name); + goto update_stats; + } + + rxfid = hermes_read_regn(hw, RXFID); + + err = hermes_bap_pread(hw, IRQ_BAP, desc, sizeof(*desc), + rxfid, 0); + if (err) { + printk(KERN_ERR "%s: error %d reading Rx descriptor. " + "Frame dropped.\n", dev->name, err); + goto update_stats; + } + + status = le16_to_cpu(desc->status); + + if (status & HERMES_RXSTAT_BADCRC) { + DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", + dev->name); + stats->rx_crc_errors++; + goto update_stats; + } + + /* Handle frames in monitor mode */ + if (priv->iw_mode == IW_MODE_MONITOR) { + orinoco_rx_monitor(dev, rxfid, desc); + goto out; + } + + if (status & HERMES_RXSTAT_UNDECRYPTABLE) { + DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n", + dev->name); + wstats->discard.code++; + goto update_stats; + } + + length = le16_to_cpu(desc->data_len); + + /* Sanity checks */ + if (length < 3) { /* No for even an 802.2 LLC header */ + /* At least on Symbol firmware with PCF we get quite a + lot of these legitimately - Poll frames with no + data. */ + goto out; + } + if (length > IEEE80211_MAX_DATA_LEN) { + printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n", + dev->name, length); + stats->rx_length_errors++; + goto update_stats; + } + + /* Payload size does not include Michael MIC. Increase payload + * size to read it together with the data. */ + if (status & HERMES_RXSTAT_MIC) + length += MICHAEL_MIC_LEN; + + /* We need space for the packet data itself, plus an ethernet + header, plus 2 bytes so we can align the IP header on a + 32bit boundary, plus 1 byte so we can read in odd length + packets from the card, which has an IO granularity of 16 + bits */ + skb = dev_alloc_skb(length+ETH_HLEN+2+1); + if (!skb) { + printk(KERN_WARNING "%s: Can't allocate skb for Rx\n", + dev->name); + goto update_stats; + } + + /* We'll prepend the header, so reserve space for it. The worst + case is no decapsulation, when 802.3 header is prepended and + nothing is removed. 2 is for aligning the IP header. */ + skb_reserve(skb, ETH_HLEN + 2); + + err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length), + ALIGN(length, 2), rxfid, + HERMES_802_2_OFFSET); + if (err) { + printk(KERN_ERR "%s: error %d reading frame. " + "Frame dropped.\n", dev->name, err); + goto drop; + } + + /* Add desc and skb to rx queue */ + rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC); + if (!rx_data) { + printk(KERN_WARNING "%s: Can't allocate RX packet\n", + dev->name); + goto drop; + } + rx_data->desc = desc; + rx_data->skb = skb; + list_add_tail(&rx_data->list, &priv->rx_list); + tasklet_schedule(&priv->rx_tasklet); + + return; + +drop: + dev_kfree_skb_irq(skb); +update_stats: + stats->rx_errors++; + stats->rx_dropped++; +out: + kfree(desc); +} + +static void orinoco_rx(struct net_device *dev, + struct hermes_rx_descriptor *desc, + struct sk_buff *skb) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + u16 status, fc; + int length; + struct ethhdr *hdr; + + status = le16_to_cpu(desc->status); + length = le16_to_cpu(desc->data_len); + fc = le16_to_cpu(desc->frame_ctl); + + /* Calculate and check MIC */ + if (status & HERMES_RXSTAT_MIC) { + int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >> + HERMES_MIC_KEY_ID_SHIFT); + u8 mic[MICHAEL_MIC_LEN]; + u8 *rxmic; + u8 *src = (fc & IEEE80211_FCTL_FROMDS) ? + desc->addr3 : desc->addr2; + + /* Extract Michael MIC from payload */ + rxmic = skb->data + skb->len - MICHAEL_MIC_LEN; + + skb_trim(skb, skb->len - MICHAEL_MIC_LEN); + length -= MICHAEL_MIC_LEN; + + michael_mic(priv->rx_tfm_mic, + priv->tkip_key[key_id].rx_mic, + desc->addr1, + src, + 0, /* priority or QoS? */ + skb->data, + skb->len, + &mic[0]); + + if (memcmp(mic, rxmic, + MICHAEL_MIC_LEN)) { + union iwreq_data wrqu; + struct iw_michaelmicfailure wxmic; + + printk(KERN_WARNING "%s: " + "Invalid Michael MIC in data frame from %pM, " + "using key %i\n", + dev->name, src, key_id); + + /* TODO: update stats */ + + /* Notify userspace */ + memset(&wxmic, 0, sizeof(wxmic)); + wxmic.flags = key_id & IW_MICFAILURE_KEY_ID; + wxmic.flags |= (desc->addr1[0] & 1) ? + IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE; + wxmic.src_addr.sa_family = ARPHRD_ETHER; + memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN); + + (void) orinoco_hw_get_tkip_iv(priv, key_id, + &wxmic.tsc[0]); + + memset(&wrqu, 0, sizeof(wrqu)); + wrqu.data.length = sizeof(wxmic); + wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, + (char *) &wxmic); + + goto drop; + } + } + + /* Handle decapsulation + * In most cases, the firmware tell us about SNAP frames. + * For some reason, the SNAP frames sent by LinkSys APs + * are not properly recognised by most firmwares. + * So, check ourselves */ + if (length >= ENCAPS_OVERHEAD && + (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) || + ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) || + is_ethersnap(skb->data))) { + /* These indicate a SNAP within 802.2 LLC within + 802.11 frame which we'll need to de-encapsulate to + the original EthernetII frame. */ + hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD); + } else { + /* 802.3 frame - prepend 802.3 header as is */ + hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN); + hdr->h_proto = htons(length); + } + memcpy(hdr->h_dest, desc->addr1, ETH_ALEN); + if (fc & IEEE80211_FCTL_FROMDS) + memcpy(hdr->h_source, desc->addr3, ETH_ALEN); + else + memcpy(hdr->h_source, desc->addr2, ETH_ALEN); + + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_NONE; + if (fc & IEEE80211_FCTL_TODS) + skb->pkt_type = PACKET_OTHERHOST; + + /* Process the wireless stats if needed */ + orinoco_stat_gather(dev, skb, desc); + + /* Pass the packet to the networking stack */ + netif_rx(skb); + stats->rx_packets++; + stats->rx_bytes += length; + + return; + + drop: + dev_kfree_skb(skb); + stats->rx_errors++; + stats->rx_dropped++; +} + +static void orinoco_rx_isr_tasklet(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_rx_data *rx_data, *temp; + struct hermes_rx_descriptor *desc; + struct sk_buff *skb; + + /* extract desc and skb from queue */ + list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) { + desc = rx_data->desc; + skb = rx_data->skb; + list_del(&rx_data->list); + kfree(rx_data); + + orinoco_rx(dev, desc, skb); + + kfree(desc); + } +} + +/********************************************************************/ +/* Rx path (info frames) */ +/********************************************************************/ + +static void print_linkstatus(struct net_device *dev, u16 status) +{ + char * s; + + if (suppress_linkstatus) + return; + + switch (status) { + case HERMES_LINKSTATUS_NOT_CONNECTED: + s = "Not Connected"; + break; + case HERMES_LINKSTATUS_CONNECTED: + s = "Connected"; + break; + case HERMES_LINKSTATUS_DISCONNECTED: + s = "Disconnected"; + break; + case HERMES_LINKSTATUS_AP_CHANGE: + s = "AP Changed"; + break; + case HERMES_LINKSTATUS_AP_OUT_OF_RANGE: + s = "AP Out of Range"; + break; + case HERMES_LINKSTATUS_AP_IN_RANGE: + s = "AP In Range"; + break; + case HERMES_LINKSTATUS_ASSOC_FAILED: + s = "Association Failed"; + break; + default: + s = "UNKNOWN"; + } + + printk(KERN_INFO "%s: New link status: %s (%04x)\n", + dev->name, s, status); +} + +/* Search scan results for requested BSSID, join it if found */ +static void orinoco_join_ap(struct work_struct *work) +{ + struct orinoco_private *priv = + container_of(work, struct orinoco_private, join_work); + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int err; + unsigned long flags; + struct join_req { + u8 bssid[ETH_ALEN]; + __le16 channel; + } __attribute__ ((packed)) req; + const int atom_len = offsetof(struct prism2_scan_apinfo, atim); + struct prism2_scan_apinfo *atom = NULL; + int offset = 4; + int found = 0; + u8 *buf; + u16 len; + + /* Allocate buffer for scan results */ + buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL); + if (! buf) + return; + + if (orinoco_lock(priv, &flags) != 0) + goto fail_lock; + + /* Sanity checks in case user changed something in the meantime */ + if (! priv->bssid_fixed) + goto out; + + if (strlen(priv->desired_essid) == 0) + goto out; + + /* Read scan results from the firmware */ + err = hermes_read_ltv(hw, USER_BAP, + HERMES_RID_SCANRESULTSTABLE, + MAX_SCAN_LEN, &len, buf); + if (err) { + printk(KERN_ERR "%s: Cannot read scan results\n", + dev->name); + goto out; + } + + len = HERMES_RECLEN_TO_BYTES(len); + + /* Go through the scan results looking for the channel of the AP + * we were requested to join */ + for (; offset + atom_len <= len; offset += atom_len) { + atom = (struct prism2_scan_apinfo *) (buf + offset); + if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) { + found = 1; + break; + } + } + + if (! found) { + DEBUG(1, "%s: Requested AP not found in scan results\n", + dev->name); + goto out; + } + + memcpy(req.bssid, priv->desired_bssid, ETH_ALEN); + req.channel = atom->channel; /* both are little-endian */ + err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST, + &req); + if (err) + printk(KERN_ERR "%s: Error issuing join request\n", dev->name); + + out: + orinoco_unlock(priv, &flags); + + fail_lock: + kfree(buf); +} + +/* Send new BSSID to userspace */ +static void orinoco_send_bssid_wevent(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + + err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID, + ETH_ALEN, NULL, wrqu.ap_addr.sa_data); + if (err != 0) + return; + + wrqu.ap_addr.sa_family = ARPHRD_ETHER; + + /* Send event to user space */ + wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); +} + +static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + u8 buf[88]; + u8 *ie; + + if (!priv->has_wpa) + return; + + err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO, + sizeof(buf), NULL, &buf); + if (err != 0) + return; + + ie = orinoco_get_wpa_ie(buf, sizeof(buf)); + if (ie) { + int rem = sizeof(buf) - (ie - &buf[0]); + wrqu.data.length = ie[1] + 2; + if (wrqu.data.length > rem) + wrqu.data.length = rem; + + if (wrqu.data.length) + /* Send event to user space */ + wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie); + } +} + +static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv) +{ + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + union iwreq_data wrqu; + int err; + u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */ + u8 *ie; + + if (!priv->has_wpa) + return; + + err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENT_ASSOC_RESP_INFO, + sizeof(buf), NULL, &buf); + if (err != 0) + return; + + ie = orinoco_get_wpa_ie(buf, sizeof(buf)); + if (ie) { + int rem = sizeof(buf) - (ie - &buf[0]); + wrqu.data.length = ie[1] + 2; + if (wrqu.data.length > rem) + wrqu.data.length = rem; + + if (wrqu.data.length) + /* Send event to user space */ + wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie); + } +} + +static void orinoco_send_wevents(struct work_struct *work) +{ + struct orinoco_private *priv = + container_of(work, struct orinoco_private, wevent_work); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return; + + orinoco_send_assocreqie_wevent(priv); + orinoco_send_assocrespie_wevent(priv); + orinoco_send_bssid_wevent(priv); + + orinoco_unlock(priv, &flags); +} + +static inline void orinoco_clear_scan_results(struct orinoco_private *priv, + unsigned long scan_age) +{ + if (priv->has_ext_scan) { + struct xbss_element *bss; + struct xbss_element *tmp_bss; + + /* Blow away current list of scan results */ + list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) { + if (!scan_age || + time_after(jiffies, bss->last_scanned + scan_age)) { + list_move_tail(&bss->list, + &priv->bss_free_list); + /* Don't blow away ->list, just BSS data */ + memset(&bss->bss, 0, sizeof(bss->bss)); + bss->last_scanned = 0; + } + } + } else { + struct bss_element *bss; + struct bss_element *tmp_bss; + + /* Blow away current list of scan results */ + list_for_each_entry_safe(bss, tmp_bss, &priv->bss_list, list) { + if (!scan_age || + time_after(jiffies, bss->last_scanned + scan_age)) { + list_move_tail(&bss->list, + &priv->bss_free_list); + /* Don't blow away ->list, just BSS data */ + memset(&bss->bss, 0, sizeof(bss->bss)); + bss->last_scanned = 0; + } + } + } +} + +static void orinoco_add_ext_scan_result(struct orinoco_private *priv, + struct agere_ext_scan_info *atom) +{ + struct xbss_element *bss = NULL; + int found = 0; + + /* Try to update an existing bss first */ + list_for_each_entry(bss, &priv->bss_list, list) { + if (compare_ether_addr(bss->bss.bssid, atom->bssid)) + continue; + /* ESSID lengths */ + if (bss->bss.data[1] != atom->data[1]) + continue; + if (memcmp(&bss->bss.data[2], &atom->data[2], + atom->data[1])) + continue; + found = 1; + break; + } + + /* Grab a bss off the free list */ + if (!found && !list_empty(&priv->bss_free_list)) { + bss = list_entry(priv->bss_free_list.next, + struct xbss_element, list); + list_del(priv->bss_free_list.next); + + list_add_tail(&bss->list, &priv->bss_list); + } + + if (bss) { + /* Always update the BSS to get latest beacon info */ + memcpy(&bss->bss, atom, sizeof(bss->bss)); + bss->last_scanned = jiffies; + } +} + +static int orinoco_process_scan_results(struct net_device *dev, + unsigned char *buf, + int len) +{ + struct orinoco_private *priv = netdev_priv(dev); + int offset; /* In the scan data */ + union hermes_scan_info *atom; + int atom_len; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + atom_len = sizeof(struct agere_scan_apinfo); + offset = 0; + break; + case FIRMWARE_TYPE_SYMBOL: + /* Lack of documentation necessitates this hack. + * Different firmwares have 68 or 76 byte long atoms. + * We try modulo first. If the length divides by both, + * we check what would be the channel in the second + * frame for a 68-byte atom. 76-byte atoms have 0 there. + * Valid channel cannot be 0. */ + if (len % 76) + atom_len = 68; + else if (len % 68) + atom_len = 76; + else if (len >= 1292 && buf[68] == 0) + atom_len = 76; + else + atom_len = 68; + offset = 0; + break; + case FIRMWARE_TYPE_INTERSIL: + offset = 4; + if (priv->has_hostscan) { + atom_len = le16_to_cpup((__le16 *)buf); + /* Sanity check for atom_len */ + if (atom_len < sizeof(struct prism2_scan_apinfo)) { + printk(KERN_ERR "%s: Invalid atom_len in scan " + "data: %d\n", dev->name, atom_len); + return -EIO; + } + } else + atom_len = offsetof(struct prism2_scan_apinfo, atim); + break; + default: + return -EOPNOTSUPP; + } + + /* Check that we got an whole number of atoms */ + if ((len - offset) % atom_len) { + printk(KERN_ERR "%s: Unexpected scan data length %d, " + "atom_len %d, offset %d\n", dev->name, len, + atom_len, offset); + return -EIO; + } + + orinoco_clear_scan_results(priv, msecs_to_jiffies(15000)); + + /* Read the entries one by one */ + for (; offset + atom_len <= len; offset += atom_len) { + int found = 0; + struct bss_element *bss = NULL; + + /* Get next atom */ + atom = (union hermes_scan_info *) (buf + offset); + + /* Try to update an existing bss first */ + list_for_each_entry(bss, &priv->bss_list, list) { + if (compare_ether_addr(bss->bss.a.bssid, atom->a.bssid)) + continue; + if (le16_to_cpu(bss->bss.a.essid_len) != + le16_to_cpu(atom->a.essid_len)) + continue; + if (memcmp(bss->bss.a.essid, atom->a.essid, + le16_to_cpu(atom->a.essid_len))) + continue; + found = 1; + break; + } + + /* Grab a bss off the free list */ + if (!found && !list_empty(&priv->bss_free_list)) { + bss = list_entry(priv->bss_free_list.next, + struct bss_element, list); + list_del(priv->bss_free_list.next); + + list_add_tail(&bss->list, &priv->bss_list); + } + + if (bss) { + /* Always update the BSS to get latest beacon info */ + memcpy(&bss->bss, atom, sizeof(bss->bss)); + bss->last_scanned = jiffies; + } + } + + return 0; +} + +static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) +{ + struct orinoco_private *priv = netdev_priv(dev); + u16 infofid; + struct { + __le16 len; + __le16 type; + } __attribute__ ((packed)) info; + int len, type; + int err; + + /* This is an answer to an INQUIRE command that we did earlier, + * or an information "event" generated by the card + * The controller return to us a pseudo frame containing + * the information in question - Jean II */ + infofid = hermes_read_regn(hw, INFOFID); + + /* Read the info frame header - don't try too hard */ + err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info), + infofid, 0); + if (err) { + printk(KERN_ERR "%s: error %d reading info frame. " + "Frame dropped.\n", dev->name, err); + return; + } + + len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len)); + type = le16_to_cpu(info.type); + + switch (type) { + case HERMES_INQ_TALLIES: { + struct hermes_tallies_frame tallies; + struct iw_statistics *wstats = &priv->wstats; + + if (len > sizeof(tallies)) { + printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n", + dev->name, len); + len = sizeof(tallies); + } + + err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len, + infofid, sizeof(info)); + if (err) + break; + + /* Increment our various counters */ + /* wstats->discard.nwid - no wrong BSSID stuff */ + wstats->discard.code += + le16_to_cpu(tallies.RxWEPUndecryptable); + if (len == sizeof(tallies)) + wstats->discard.code += + le16_to_cpu(tallies.RxDiscards_WEPICVError) + + le16_to_cpu(tallies.RxDiscards_WEPExcluded); + wstats->discard.misc += + le16_to_cpu(tallies.TxDiscardsWrongSA); + wstats->discard.fragment += + le16_to_cpu(tallies.RxMsgInBadMsgFragments); + wstats->discard.retries += + le16_to_cpu(tallies.TxRetryLimitExceeded); + /* wstats->miss.beacon - no match */ + } + break; + case HERMES_INQ_LINKSTATUS: { + struct hermes_linkstatus linkstatus; + u16 newstatus; + int connected; + + if (priv->iw_mode == IW_MODE_MONITOR) + break; + + if (len != sizeof(linkstatus)) { + printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n", + dev->name, len); + break; + } + + err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len, + infofid, sizeof(info)); + if (err) + break; + newstatus = le16_to_cpu(linkstatus.linkstatus); + + /* Symbol firmware uses "out of range" to signal that + * the hostscan frame can be requested. */ + if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE && + priv->firmware_type == FIRMWARE_TYPE_SYMBOL && + priv->has_hostscan && priv->scan_inprogress) { + hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL); + break; + } + + connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) + || (newstatus == HERMES_LINKSTATUS_AP_CHANGE) + || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE); + + if (connected) + netif_carrier_on(dev); + else if (!ignore_disconnect) + netif_carrier_off(dev); + + if (newstatus != priv->last_linkstatus) { + priv->last_linkstatus = newstatus; + print_linkstatus(dev, newstatus); + /* The info frame contains only one word which is the + * status (see hermes.h). The status is pretty boring + * in itself, that's why we export the new BSSID... + * Jean II */ + schedule_work(&priv->wevent_work); + } + } + break; + case HERMES_INQ_SCAN: + if (!priv->scan_inprogress && priv->bssid_fixed && + priv->firmware_type == FIRMWARE_TYPE_INTERSIL) { + schedule_work(&priv->join_work); + break; + } + /* fall through */ + case HERMES_INQ_HOSTSCAN: + case HERMES_INQ_HOSTSCAN_SYMBOL: { + /* Result of a scanning. Contains information about + * cells in the vicinity - Jean II */ + union iwreq_data wrqu; + unsigned char *buf; + + /* Scan is no longer in progress */ + priv->scan_inprogress = 0; + + /* Sanity check */ + if (len > 4096) { + printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n", + dev->name, len); + break; + } + + /* Allocate buffer for results */ + buf = kmalloc(len, GFP_ATOMIC); + if (buf == NULL) + /* No memory, so can't printk()... */ + break; + + /* Read scan data */ + err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len, + infofid, sizeof(info)); + if (err) { + kfree(buf); + break; + } + +#ifdef ORINOCO_DEBUG + { + int i; + printk(KERN_DEBUG "Scan result [%02X", buf[0]); + for(i = 1; i < (len * 2); i++) + printk(":%02X", buf[i]); + printk("]\n"); + } +#endif /* ORINOCO_DEBUG */ + + if (orinoco_process_scan_results(dev, buf, len) == 0) { + /* Send an empty event to user space. + * We don't send the received data on the event because + * it would require us to do complex transcoding, and + * we want to minimise the work done in the irq handler + * Use a request to extract the data - Jean II */ + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); + } + kfree(buf); + } + break; + case HERMES_INQ_CHANNELINFO: + { + struct agere_ext_scan_info *bss; + + if (!priv->scan_inprogress) { + printk(KERN_DEBUG "%s: Got chaninfo without scan, " + "len=%d\n", dev->name, len); + break; + } + + /* An empty result indicates that the scan is complete */ + if (len == 0) { + union iwreq_data wrqu; + + /* Scan is no longer in progress */ + priv->scan_inprogress = 0; + + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL); + break; + } + + /* Sanity check */ + else if (len > sizeof(*bss)) { + printk(KERN_WARNING + "%s: Ext scan results too large (%d bytes). " + "Truncating results to %zd bytes.\n", + dev->name, len, sizeof(*bss)); + len = sizeof(*bss); + } else if (len < (offsetof(struct agere_ext_scan_info, + data) + 2)) { + /* Drop this result now so we don't have to + * keep checking later */ + printk(KERN_WARNING + "%s: Ext scan results too short (%d bytes)\n", + dev->name, len); + break; + } + + bss = kmalloc(sizeof(*bss), GFP_ATOMIC); + if (bss == NULL) + break; + + /* Read scan data */ + err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len, + infofid, sizeof(info)); + if (err) { + kfree(bss); + break; + } + + orinoco_add_ext_scan_result(priv, bss); + + kfree(bss); + break; + } + case HERMES_INQ_SEC_STAT_AGERE: + /* Security status (Agere specific) */ + /* Ignore this frame for now */ + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) + break; + /* fall through */ + default: + printk(KERN_DEBUG "%s: Unknown information frame received: " + "type 0x%04x, length %d\n", dev->name, type, len); + /* We don't actually do anything about it */ + break; + } +} + +static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw) +{ + if (net_ratelimit()) + printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name); +} + +/********************************************************************/ +/* Internal hardware control routines */ +/********************************************************************/ + +int __orinoco_up(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err; + + netif_carrier_off(dev); /* just to make sure */ + + err = __orinoco_program_rids(dev); + if (err) { + printk(KERN_ERR "%s: Error %d configuring card\n", + dev->name, err); + return err; + } + + /* Fire things up again */ + hermes_set_irqmask(hw, ORINOCO_INTEN); + err = hermes_enable_port(hw, 0); + if (err) { + printk(KERN_ERR "%s: Error %d enabling MAC port\n", + dev->name, err); + return err; + } + + netif_start_queue(dev); + + return 0; +} + +int __orinoco_down(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err; + + netif_stop_queue(dev); + + if (! priv->hw_unavailable) { + if (! priv->broken_disableport) { + err = hermes_disable_port(hw, 0); + if (err) { + /* Some firmwares (e.g. Intersil 1.3.x) seem + * to have problems disabling the port, oh + * well, too bad. */ + printk(KERN_WARNING "%s: Error %d disabling MAC port\n", + dev->name, err); + priv->broken_disableport = 1; + } + } + hermes_set_irqmask(hw, 0); + hermes_write_regn(hw, EVACK, 0xffff); + } + + /* firmware will have to reassociate */ + netif_carrier_off(dev); + priv->last_linkstatus = 0xffff; + + return 0; +} + +static int orinoco_allocate_fid(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err; + + err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); + if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { + /* Try workaround for old Symbol firmware bug */ + printk(KERN_WARNING "%s: firmware ALLOC bug detected " + "(old Symbol firmware?). Trying to work around... ", + dev->name); + + priv->nicbuf_size = TX_NICBUF_SIZE_BUG; + err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); + if (err) + printk("failed!\n"); + else + printk("ok.\n"); + } + + return err; +} + +int orinoco_reinit_firmware(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + int err; + + err = hermes_init(hw); + if (priv->do_fw_download && !err) { + err = orinoco_download(priv); + if (err) + priv->do_fw_download = 0; + } + if (!err) + err = orinoco_allocate_fid(dev); + + return err; +} + +static int __orinoco_hw_set_bitrate(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + int err = 0; + + if (priv->bitratemode >= BITRATE_TABLE_SIZE) { + printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n", + priv->ndev->name, priv->bitratemode); + return -EINVAL; + } + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXRATECONTROL, + bitrate_table[priv->bitratemode].agere_txratectrl); + break; + case FIRMWARE_TYPE_INTERSIL: + case FIRMWARE_TYPE_SYMBOL: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXRATECONTROL, + bitrate_table[priv->bitratemode].intersil_txratectrl); + break; + default: + BUG(); + } + + return err; +} + +/* Set fixed AP address */ +static int __orinoco_hw_set_wap(struct orinoco_private *priv) +{ + int roaming_flag; + int err = 0; + hermes_t *hw = &priv->hw; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* not supported */ + break; + case FIRMWARE_TYPE_INTERSIL: + if (priv->bssid_fixed) + roaming_flag = 2; + else + roaming_flag = 1; + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFROAMINGMODE, + roaming_flag); + break; + case FIRMWARE_TYPE_SYMBOL: + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFMANDATORYBSSID_SYMBOL, + &priv->desired_bssid); + break; + } + return err; +} + +/* Change the WEP keys and/or the current keys. Can be called + * either from __orinoco_hw_setup_enc() or directly from + * orinoco_ioctl_setiwencode(). In the later case the association + * with the AP is not broken (if the firmware can handle it), + * which is needed for 802.1x implementations. */ +static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + int err = 0; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFWEPKEYS_AGERE, + &priv->keys); + if (err) + return err; + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFTXKEY_AGERE, + priv->tx_key); + if (err) + return err; + break; + case FIRMWARE_TYPE_INTERSIL: + case FIRMWARE_TYPE_SYMBOL: + { + int keylen; + int i; + + /* Force uniform key length to work around firmware bugs */ + keylen = le16_to_cpu(priv->keys[priv->tx_key].len); + + if (keylen > LARGE_KEY_SIZE) { + printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n", + priv->ndev->name, priv->tx_key, keylen); + return -E2BIG; + } + + /* Write all 4 keys */ + for(i = 0; i < ORINOCO_MAX_KEYS; i++) { + err = hermes_write_ltv(hw, USER_BAP, + HERMES_RID_CNFDEFAULTKEY0 + i, + HERMES_BYTES_TO_RECLEN(keylen), + priv->keys[i].data); + if (err) + return err; + } + + /* Write the index of the key used in transmission */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPDEFAULTKEYID, + priv->tx_key); + if (err) + return err; + } + break; + } + + return 0; +} + +static int __orinoco_hw_setup_enc(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + int err = 0; + int master_wep_flag; + int auth_flag; + int enc_flag; + + /* Setup WEP keys for WEP and WPA */ + if (priv->encode_alg) + __orinoco_hw_setup_wepkeys(priv); + + if (priv->wep_restrict) + auth_flag = HERMES_AUTH_SHARED_KEY; + else + auth_flag = HERMES_AUTH_OPEN; + + if (priv->wpa_enabled) + enc_flag = 2; + else if (priv->encode_alg == IW_ENCODE_ALG_WEP) + enc_flag = 1; + else + enc_flag = 0; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: /* Agere style WEP */ + if (priv->encode_alg == IW_ENCODE_ALG_WEP) { + /* Enable the shared-key authentication. */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFAUTHENTICATION_AGERE, + auth_flag); + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPENABLED_AGERE, + enc_flag); + if (err) + return err; + + if (priv->has_wpa) { + /* Set WPA key management */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE, + priv->key_mgmt); + if (err) + return err; + } + + break; + + case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */ + case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */ + if (priv->encode_alg == IW_ENCODE_ALG_WEP) { + if (priv->wep_restrict || + (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)) + master_wep_flag = HERMES_WEP_PRIVACY_INVOKED | + HERMES_WEP_EXCL_UNENCRYPTED; + else + master_wep_flag = HERMES_WEP_PRIVACY_INVOKED; + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFAUTHENTICATION, + auth_flag); + if (err) + return err; + } else + master_wep_flag = 0; + + if (priv->iw_mode == IW_MODE_MONITOR) + master_wep_flag |= HERMES_WEP_HOST_DECRYPT; + + /* Master WEP setting : on/off */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFWEPFLAGS_INTERSIL, + master_wep_flag); + if (err) + return err; + + break; + } + + return 0; +} + +/* key must be 32 bytes, including the tx and rx MIC keys. + * rsc must be 8 bytes + * tsc must be 8 bytes or NULL + */ +static int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx, + u8 *key, u8 *rsc, u8 *tsc) +{ + struct { + __le16 idx; + u8 rsc[IW_ENCODE_SEQ_MAX_SIZE]; + u8 key[TKIP_KEYLEN]; + u8 tx_mic[MIC_KEYLEN]; + u8 rx_mic[MIC_KEYLEN]; + u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; + } __attribute__ ((packed)) buf; + int ret; + int err; + int k; + u16 xmitting; + + key_idx &= 0x3; + + if (set_tx) + key_idx |= 0x8000; + + buf.idx = cpu_to_le16(key_idx); + memcpy(buf.key, key, + sizeof(buf.key) + sizeof(buf.tx_mic) + sizeof(buf.rx_mic)); + + if (rsc == NULL) + memset(buf.rsc, 0, sizeof(buf.rsc)); + else + memcpy(buf.rsc, rsc, sizeof(buf.rsc)); + + if (tsc == NULL) { + memset(buf.tsc, 0, sizeof(buf.tsc)); + buf.tsc[4] = 0x10; + } else { + memcpy(buf.tsc, tsc, sizeof(buf.tsc)); + } + + /* Wait upto 100ms for tx queue to empty */ + k = 100; + do { + k--; + udelay(1000); + ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, + &xmitting); + if (ret) + break; + } while ((k > 0) && xmitting); + + if (k == 0) + ret = -ETIMEDOUT; + + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE, + &buf); + + return ret ? ret : err; +} + +static int orinoco_clear_tkip_key(struct orinoco_private *priv, + int key_idx) +{ + hermes_t *hw = &priv->hw; + int err; + + memset(&priv->tkip_key[key_idx], 0, sizeof(priv->tkip_key[key_idx])); + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE, + key_idx); + if (err) + printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n", + priv->ndev->name, err, key_idx); + return err; +} + +static int __orinoco_program_rids(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err; + struct hermes_idstring idbuf; + + /* Set the MAC address */ + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, + HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr); + if (err) { + printk(KERN_ERR "%s: Error %d setting MAC address\n", + dev->name, err); + return err; + } + + /* Set up the link mode */ + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE, + priv->port_type); + if (err) { + printk(KERN_ERR "%s: Error %d setting port type\n", + dev->name, err); + return err; + } + /* Set the channel/frequency */ + if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFOWNCHANNEL, + priv->channel); + if (err) { + printk(KERN_ERR "%s: Error %d setting channel %d\n", + dev->name, err, priv->channel); + return err; + } + } + + if (priv->has_ibss) { + u16 createibss; + + if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) { + printk(KERN_WARNING "%s: This firmware requires an " + "ESSID in IBSS-Ad-Hoc mode.\n", dev->name); + /* With wvlan_cs, in this case, we would crash. + * hopefully, this driver will behave better... + * Jean II */ + createibss = 0; + } else { + createibss = priv->createibss; + } + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFCREATEIBSS, + createibss); + if (err) { + printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n", + dev->name, err); + return err; + } + } + + /* Set the desired BSSID */ + err = __orinoco_hw_set_wap(priv); + if (err) { + printk(KERN_ERR "%s: Error %d setting AP address\n", + dev->name, err); + return err; + } + /* Set the desired ESSID */ + idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); + memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); + /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, + HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting OWNSSID\n", + dev->name, err); + return err; + } + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, + HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n", + dev->name, err); + return err; + } + + /* Set the station name */ + idbuf.len = cpu_to_le16(strlen(priv->nick)); + memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); + err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, + HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2), + &idbuf); + if (err) { + printk(KERN_ERR "%s: Error %d setting nickname\n", + dev->name, err); + return err; + } + + /* Set AP density */ + if (priv->has_sensitivity) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSYSTEMSCALE, + priv->ap_density); + if (err) { + printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. " + "Disabling sensitivity control\n", + dev->name, err); + + priv->has_sensitivity = 0; + } + } + + /* Set RTS threshold */ + err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, + priv->rts_thresh); + if (err) { + printk(KERN_ERR "%s: Error %d setting RTS threshold\n", + dev->name, err); + return err; + } + + /* Set fragmentation threshold or MWO robustness */ + if (priv->has_mwo) + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMWOROBUST_AGERE, + priv->mwo_robust); + else + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, + priv->frag_thresh); + if (err) { + printk(KERN_ERR "%s: Error %d setting fragmentation\n", + dev->name, err); + return err; + } + + /* Set bitrate */ + err = __orinoco_hw_set_bitrate(priv); + if (err) { + printk(KERN_ERR "%s: Error %d setting bitrate\n", + dev->name, err); + return err; + } + + /* Set power management */ + if (priv->has_pm) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMENABLED, + priv->pm_on); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMULTICASTRECEIVE, + priv->pm_mcast); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, + priv->pm_period); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMHOLDOVERDURATION, + priv->pm_timeout); + if (err) { + printk(KERN_ERR "%s: Error %d setting up PM\n", + dev->name, err); + return err; + } + } + + /* Set preamble - only for Symbol so far... */ + if (priv->has_preamble) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPREAMBLE_SYMBOL, + priv->preamble); + if (err) { + printk(KERN_ERR "%s: Error %d setting preamble\n", + dev->name, err); + return err; + } + } + + /* Set up encryption */ + if (priv->has_wep || priv->has_wpa) { + err = __orinoco_hw_setup_enc(priv); + if (err) { + printk(KERN_ERR "%s: Error %d activating encryption\n", + dev->name, err); + return err; + } + } + + if (priv->iw_mode == IW_MODE_MONITOR) { + /* Enable monitor mode */ + dev->type = ARPHRD_IEEE80211; + err = hermes_docmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_MONITOR, 0, NULL); + } else { + /* Disable monitor mode */ + dev->type = ARPHRD_ETHER; + err = hermes_docmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_STOP, 0, NULL); + } + if (err) + return err; + + /* Set promiscuity / multicast*/ + priv->promiscuous = 0; + priv->mc_count = 0; + + /* FIXME: what about netif_tx_lock */ + __orinoco_set_multicast_list(dev); + + return 0; +} + +/* FIXME: return int? */ +static void +__orinoco_set_multicast_list(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + int promisc, mc_count; + + /* The Hermes doesn't seem to have an allmulti mode, so we go + * into promiscuous mode and let the upper levels deal. */ + if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || + (dev->mc_count > MAX_MULTICAST(priv)) ) { + promisc = 1; + mc_count = 0; + } else { + promisc = 0; + mc_count = dev->mc_count; + } + + if (promisc != priv->promiscuous) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFPROMISCUOUSMODE, + promisc); + if (err) { + printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n", + dev->name, err); + } else + priv->promiscuous = promisc; + } + + /* If we're not in promiscuous mode, then we need to set the + * group address if either we want to multicast, or if we were + * multicasting and want to stop */ + if (! promisc && (mc_count || priv->mc_count) ) { + struct dev_mc_list *p = dev->mc_list; + struct hermes_multicast mclist; + int i; + + for (i = 0; i < mc_count; i++) { + /* paranoia: is list shorter than mc_count? */ + BUG_ON(! p); + /* paranoia: bad address size in list? */ + BUG_ON(p->dmi_addrlen != ETH_ALEN); + + memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN); + p = p->next; + } + + if (p) + printk(KERN_WARNING "%s: Multicast list is " + "longer than mc_count\n", dev->name); + + err = hermes_write_ltv(hw, USER_BAP, + HERMES_RID_CNFGROUPADDRESSES, + HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN), + &mclist); + if (err) + printk(KERN_ERR "%s: Error %d setting multicast list.\n", + dev->name, err); + else + priv->mc_count = mc_count; + } +} + +/* This must be called from user context, without locks held - use + * schedule_work() */ +static void orinoco_reset(struct work_struct *work) +{ + struct orinoco_private *priv = + container_of(work, struct orinoco_private, reset_work); + struct net_device *dev = priv->ndev; + struct hermes *hw = &priv->hw; + int err; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + /* When the hardware becomes available again, whatever + * detects that is responsible for re-initializing + * it. So no need for anything further */ + return; + + netif_stop_queue(dev); + + /* Shut off interrupts. Depending on what state the hardware + * is in, this might not work, but we'll try anyway */ + hermes_set_irqmask(hw, 0); + hermes_write_regn(hw, EVACK, 0xffff); + + priv->hw_unavailable++; + priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */ + netif_carrier_off(dev); + + orinoco_unlock(priv, &flags); + + /* Scanning support: Cleanup of driver struct */ + orinoco_clear_scan_results(priv, 0); + priv->scan_inprogress = 0; + + if (priv->hard_reset) { + err = (*priv->hard_reset)(priv); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d " + "performing hard reset\n", dev->name, err); + goto disable; + } + } + + err = orinoco_reinit_firmware(dev); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", + dev->name, err); + goto disable; + } + + spin_lock_irq(&priv->lock); /* This has to be called from user context */ + + priv->hw_unavailable--; + + /* priv->open or priv->hw_unavailable might have changed while + * we dropped the lock */ + if (priv->open && (! priv->hw_unavailable)) { + err = __orinoco_up(dev); + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n", + dev->name, err); + } else + dev->trans_start = jiffies; + } + + spin_unlock_irq(&priv->lock); + + return; + disable: + hermes_set_irqmask(hw, 0); + netif_device_detach(dev); + printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); +} + +/********************************************************************/ +/* Interrupt handler */ +/********************************************************************/ + +static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw) +{ + printk(KERN_DEBUG "%s: TICK\n", dev->name); +} + +static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw) +{ + /* This seems to happen a fair bit under load, but ignoring it + seems to work fine...*/ + printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n", + dev->name); +} + +irqreturn_t orinoco_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int count = MAX_IRQLOOPS_PER_IRQ; + u16 evstat, events; + /* These are used to detect a runaway interrupt situation */ + /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy, + * we panic and shut down the hardware */ + static int last_irq_jiffy = 0; /* jiffies value the last time + * we were called */ + static int loops_this_jiffy = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) { + /* If hw is unavailable - we don't know if the irq was + * for us or not */ + return IRQ_HANDLED; + } + + evstat = hermes_read_regn(hw, EVSTAT); + events = evstat & hw->inten; + if (! events) { + orinoco_unlock(priv, &flags); + return IRQ_NONE; + } + + if (jiffies != last_irq_jiffy) + loops_this_jiffy = 0; + last_irq_jiffy = jiffies; + + while (events && count--) { + if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) { + printk(KERN_WARNING "%s: IRQ handler is looping too " + "much! Resetting.\n", dev->name); + /* Disable interrupts for now */ + hermes_set_irqmask(hw, 0); + schedule_work(&priv->reset_work); + break; + } + + /* Check the card hasn't been removed */ + if (! hermes_present(hw)) { + DEBUG(0, "orinoco_interrupt(): card removed\n"); + break; + } + + if (events & HERMES_EV_TICK) + __orinoco_ev_tick(dev, hw); + if (events & HERMES_EV_WTERR) + __orinoco_ev_wterr(dev, hw); + if (events & HERMES_EV_INFDROP) + __orinoco_ev_infdrop(dev, hw); + if (events & HERMES_EV_INFO) + __orinoco_ev_info(dev, hw); + if (events & HERMES_EV_RX) + __orinoco_ev_rx(dev, hw); + if (events & HERMES_EV_TXEXC) + __orinoco_ev_txexc(dev, hw); + if (events & HERMES_EV_TX) + __orinoco_ev_tx(dev, hw); + if (events & HERMES_EV_ALLOC) + __orinoco_ev_alloc(dev, hw); + + hermes_write_regn(hw, EVACK, evstat); + + evstat = hermes_read_regn(hw, EVSTAT); + events = evstat & hw->inten; + }; + + orinoco_unlock(priv, &flags); + return IRQ_HANDLED; +} + +/********************************************************************/ +/* Initialization */ +/********************************************************************/ + +struct comp_id { + u16 id, variant, major, minor; +} __attribute__ ((packed)); + +static inline fwtype_t determine_firmware_type(struct comp_id *nic_id) +{ + if (nic_id->id < 0x8000) + return FIRMWARE_TYPE_AGERE; + else if (nic_id->id == 0x8000 && nic_id->major == 0) + return FIRMWARE_TYPE_SYMBOL; + else + return FIRMWARE_TYPE_INTERSIL; +} + +/* Set priv->firmware type, determine firmware properties */ +static int determine_firmware(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err; + struct comp_id nic_id, sta_id; + unsigned int firmver; + char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2))); + + /* Get the hardware version */ + err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id); + if (err) { + printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n", + dev->name, err); + return err; + } + + le16_to_cpus(&nic_id.id); + le16_to_cpus(&nic_id.variant); + le16_to_cpus(&nic_id.major); + le16_to_cpus(&nic_id.minor); + printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n", + dev->name, nic_id.id, nic_id.variant, + nic_id.major, nic_id.minor); + + priv->firmware_type = determine_firmware_type(&nic_id); + + /* Get the firmware version */ + err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id); + if (err) { + printk(KERN_ERR "%s: Cannot read station identity: error %d\n", + dev->name, err); + return err; + } + + le16_to_cpus(&sta_id.id); + le16_to_cpus(&sta_id.variant); + le16_to_cpus(&sta_id.major); + le16_to_cpus(&sta_id.minor); + printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n", + dev->name, sta_id.id, sta_id.variant, + sta_id.major, sta_id.minor); + + switch (sta_id.id) { + case 0x15: + printk(KERN_ERR "%s: Primary firmware is active\n", + dev->name); + return -ENODEV; + case 0x14b: + printk(KERN_ERR "%s: Tertiary firmware is active\n", + dev->name); + return -ENODEV; + case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */ + case 0x21: /* Symbol Spectrum24 Trilogy */ + break; + default: + printk(KERN_NOTICE "%s: Unknown station ID, please report\n", + dev->name); + break; + } + + /* Default capabilities */ + priv->has_sensitivity = 1; + priv->has_mwo = 0; + priv->has_preamble = 0; + priv->has_port3 = 1; + priv->has_ibss = 1; + priv->has_wep = 0; + priv->has_big_wep = 0; + priv->has_alt_txcntl = 0; + priv->has_ext_scan = 0; + priv->has_wpa = 0; + priv->do_fw_download = 0; + + /* Determine capabilities from the firmware version */ + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: + /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout, + ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */ + snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, + "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor); + + firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor; + + priv->has_ibss = (firmver >= 0x60006); + priv->has_wep = (firmver >= 0x40020); + priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell + Gold cards from the others? */ + priv->has_mwo = (firmver >= 0x60000); + priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */ + priv->ibss_port = 1; + priv->has_hostscan = (firmver >= 0x8000a); + priv->do_fw_download = 1; + priv->broken_monitor = (firmver >= 0x80000); + priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */ + priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */ + priv->has_wpa = (firmver >= 0x9002a); + /* Tested with Agere firmware : + * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II + * Tested CableTron firmware : 4.32 => Anton */ + break; + case FIRMWARE_TYPE_SYMBOL: + /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */ + /* Intel MAC : 00:02:B3:* */ + /* 3Com MAC : 00:50:DA:* */ + memset(tmp, 0, sizeof(tmp)); + /* Get the Symbol firmware version */ + err = hermes_read_ltv(hw, USER_BAP, + HERMES_RID_SECONDARYVERSION_SYMBOL, + SYMBOL_MAX_VER_LEN, NULL, &tmp); + if (err) { + printk(KERN_WARNING + "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n", + dev->name, err); + firmver = 0; + tmp[0] = '\0'; + } else { + /* The firmware revision is a string, the format is + * something like : "V2.20-01". + * Quick and dirty parsing... - Jean II + */ + firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12) + | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4) + | (tmp[7] - '0'); + + tmp[SYMBOL_MAX_VER_LEN] = '\0'; + } + + snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, + "Symbol %s", tmp); + + priv->has_ibss = (firmver >= 0x20000); + priv->has_wep = (firmver >= 0x15012); + priv->has_big_wep = (firmver >= 0x20000); + priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) || + (firmver >= 0x29000 && firmver < 0x30000) || + firmver >= 0x31000; + priv->has_preamble = (firmver >= 0x20000); + priv->ibss_port = 4; + + /* Symbol firmware is found on various cards, but + * there has been no attempt to check firmware + * download on non-spectrum_cs based cards. + * + * Given that the Agere firmware download works + * differently, we should avoid doing a firmware + * download with the Symbol algorithm on non-spectrum + * cards. + * + * For now we can identify a spectrum_cs based card + * because it has a firmware reset function. + */ + priv->do_fw_download = (priv->stop_fw != NULL); + + priv->broken_disableport = (firmver == 0x25013) || + (firmver >= 0x30000 && firmver <= 0x31000); + priv->has_hostscan = (firmver >= 0x31001) || + (firmver >= 0x29057 && firmver < 0x30000); + /* Tested with Intel firmware : 0x20015 => Jean II */ + /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ + break; + case FIRMWARE_TYPE_INTERSIL: + /* D-Link, Linksys, Adtron, ZoomAir, and many others... + * Samsung, Compaq 100/200 and Proxim are slightly + * different and less well tested */ + /* D-Link MAC : 00:40:05:* */ + /* Addtron MAC : 00:90:D1:* */ + snprintf(priv->fw_name, sizeof(priv->fw_name) - 1, + "Intersil %d.%d.%d", sta_id.major, sta_id.minor, + sta_id.variant); + + firmver = ((unsigned long)sta_id.major << 16) | + ((unsigned long)sta_id.minor << 8) | sta_id.variant; + + priv->has_ibss = (firmver >= 0x000700); /* FIXME */ + priv->has_big_wep = priv->has_wep = (firmver >= 0x000800); + priv->has_pm = (firmver >= 0x000700); + priv->has_hostscan = (firmver >= 0x010301); + + if (firmver >= 0x000800) + priv->ibss_port = 0; + else { + printk(KERN_NOTICE "%s: Intersil firmware earlier " + "than v0.8.x - several features not supported\n", + dev->name); + priv->ibss_port = 1; + } + break; + } + printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name, + priv->fw_name); + + return 0; +} + +static int orinoco_init(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + struct hermes_idstring nickbuf; + u16 reclen; + int len; + + /* No need to lock, the hw_unavailable flag is already set in + * alloc_orinocodev() */ + priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN; + + /* Initialize the firmware */ + err = hermes_init(hw); + if (err != 0) { + printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n", + dev->name, err); + goto out; + } + + err = determine_firmware(dev); + if (err != 0) { + printk(KERN_ERR "%s: Incompatible firmware, aborting\n", + dev->name); + goto out; + } + + if (priv->do_fw_download) { + err = orinoco_download(priv); + if (err) + priv->do_fw_download = 0; + + /* Check firmware version again */ + err = determine_firmware(dev); + if (err != 0) { + printk(KERN_ERR "%s: Incompatible firmware, aborting\n", + dev->name); + goto out; + } + } + + if (priv->has_port3) + printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name); + if (priv->has_ibss) + printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n", + dev->name); + if (priv->has_wep) { + printk(KERN_DEBUG "%s: WEP supported, ", dev->name); + if (priv->has_big_wep) + printk("104-bit key\n"); + else + printk("40-bit key\n"); + } + if (priv->has_wpa) { + printk(KERN_DEBUG "%s: WPA-PSK supported\n", dev->name); + if (orinoco_mic_init(priv)) { + printk(KERN_ERR "%s: Failed to setup MIC crypto " + "algorithm. Disabling WPA support\n", dev->name); + priv->has_wpa = 0; + } + } + + /* Now we have the firmware capabilities, allocate appropiate + * sized scan buffers */ + if (orinoco_bss_data_allocate(priv)) + goto out; + orinoco_bss_data_init(priv); + + /* Get the MAC address */ + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, + ETH_ALEN, NULL, dev->dev_addr); + if (err) { + printk(KERN_WARNING "%s: failed to read MAC address!\n", + dev->name); + goto out; + } + + printk(KERN_DEBUG "%s: MAC address %pM\n", + dev->name, dev->dev_addr); + + /* Get the station name */ + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, + sizeof(nickbuf), &reclen, &nickbuf); + if (err) { + printk(KERN_ERR "%s: failed to read station name\n", + dev->name); + goto out; + } + if (nickbuf.len) + len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len)); + else + len = min(IW_ESSID_MAX_SIZE, 2 * reclen); + memcpy(priv->nick, &nickbuf.val, len); + priv->nick[len] = '\0'; + + printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick); + + err = orinoco_allocate_fid(dev); + if (err) { + printk(KERN_ERR "%s: failed to allocate NIC buffer!\n", + dev->name); + goto out; + } + + /* Get allowed channels */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST, + &priv->channel_mask); + if (err) { + printk(KERN_ERR "%s: failed to read channel list!\n", + dev->name); + goto out; + } + + /* Get initial AP density */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE, + &priv->ap_density); + if (err || priv->ap_density < 1 || priv->ap_density > 3) { + priv->has_sensitivity = 0; + } + + /* Get initial RTS threshold */ + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD, + &priv->rts_thresh); + if (err) { + printk(KERN_ERR "%s: failed to read RTS threshold!\n", + dev->name); + goto out; + } + + /* Get initial fragmentation settings */ + if (priv->has_mwo) + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMWOROBUST_AGERE, + &priv->mwo_robust); + else + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, + &priv->frag_thresh); + if (err) { + printk(KERN_ERR "%s: failed to read fragmentation settings!\n", + dev->name); + goto out; + } + + /* Power management setup */ + if (priv->has_pm) { + priv->pm_on = 0; + priv->pm_mcast = 1; + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, + &priv->pm_period); + if (err) { + printk(KERN_ERR "%s: failed to read power management period!\n", + dev->name); + goto out; + } + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPMHOLDOVERDURATION, + &priv->pm_timeout); + if (err) { + printk(KERN_ERR "%s: failed to read power management timeout!\n", + dev->name); + goto out; + } + } + + /* Preamble setup */ + if (priv->has_preamble) { + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFPREAMBLE_SYMBOL, + &priv->preamble); + if (err) + goto out; + } + + /* Set up the default configuration */ + priv->iw_mode = IW_MODE_INFRA; + /* By default use IEEE/IBSS ad-hoc mode if we have it */ + priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss); + set_port_type(priv); + priv->channel = 0; /* use firmware default */ + + priv->promiscuous = 0; + priv->encode_alg = IW_ENCODE_ALG_NONE; + priv->tx_key = 0; + priv->wpa_enabled = 0; + priv->tkip_cm_active = 0; + priv->key_mgmt = 0; + priv->wpa_ie_len = 0; + priv->wpa_ie = NULL; + + /* Make the hardware available, as long as it hasn't been + * removed elsewhere (e.g. by PCMCIA hot unplug) */ + spin_lock_irq(&priv->lock); + priv->hw_unavailable--; + spin_unlock_irq(&priv->lock); + + printk(KERN_DEBUG "%s: ready\n", dev->name); + + out: + return err; +} + +struct net_device +*alloc_orinocodev(int sizeof_card, + struct device *device, + int (*hard_reset)(struct orinoco_private *), + int (*stop_fw)(struct orinoco_private *, int)) +{ + struct net_device *dev; + struct orinoco_private *priv; + + dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card); + if (! dev) + return NULL; + priv = netdev_priv(dev); + priv->ndev = dev; + if (sizeof_card) + priv->card = (void *)((unsigned long)priv + + sizeof(struct orinoco_private)); + else + priv->card = NULL; + priv->dev = device; + + /* Setup / override net_device fields */ + dev->init = orinoco_init; + dev->hard_start_xmit = orinoco_xmit; + dev->tx_timeout = orinoco_tx_timeout; + dev->watchdog_timeo = HZ; /* 1 second timeout */ + dev->get_stats = orinoco_get_stats; + dev->ethtool_ops = &orinoco_ethtool_ops; + dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def; +#ifdef WIRELESS_SPY + priv->wireless_data.spy_data = &priv->spy_data; + dev->wireless_data = &priv->wireless_data; +#endif + dev->change_mtu = orinoco_change_mtu; + dev->set_multicast_list = orinoco_set_multicast_list; + /* we use the default eth_mac_addr for setting the MAC addr */ + + /* Reserve space in skb for the SNAP header */ + dev->hard_header_len += ENCAPS_OVERHEAD; + + /* Set up default callbacks */ + dev->open = orinoco_open; + dev->stop = orinoco_stop; + priv->hard_reset = hard_reset; + priv->stop_fw = stop_fw; + + spin_lock_init(&priv->lock); + priv->open = 0; + priv->hw_unavailable = 1; /* orinoco_init() must clear this + * before anything else touches the + * hardware */ + INIT_WORK(&priv->reset_work, orinoco_reset); + INIT_WORK(&priv->join_work, orinoco_join_ap); + INIT_WORK(&priv->wevent_work, orinoco_send_wevents); + + INIT_LIST_HEAD(&priv->rx_list); + tasklet_init(&priv->rx_tasklet, orinoco_rx_isr_tasklet, + (unsigned long) dev); + + netif_carrier_off(dev); + priv->last_linkstatus = 0xffff; + + priv->cached_fw = NULL; + + return dev; +} + +void free_orinocodev(struct net_device *dev) +{ + struct orinoco_private *priv = netdev_priv(dev); + + /* No need to empty priv->rx_list: if the tasklet is scheduled + * when we call tasklet_kill it will run one final time, + * emptying the list */ + tasklet_kill(&priv->rx_tasklet); + if (priv->cached_fw) + release_firmware(priv->cached_fw); + priv->cached_fw = NULL; + priv->wpa_ie_len = 0; + kfree(priv->wpa_ie); + orinoco_mic_free(priv); + orinoco_bss_data_free(priv); + free_netdev(dev); +} + +/********************************************************************/ +/* Wireless extensions */ +/********************************************************************/ + +/* Return : < 0 -> error code ; >= 0 -> length */ +static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, + char buf[IW_ESSID_MAX_SIZE+1]) +{ + hermes_t *hw = &priv->hw; + int err = 0; + struct hermes_idstring essidbuf; + char *p = (char *)(&essidbuf.val); + int len; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (strlen(priv->desired_essid) > 0) { + /* We read the desired SSID from the hardware rather + than from priv->desired_essid, just in case the + firmware is allowed to change it on us. I'm not + sure about this */ + /* My guess is that the OWNSSID should always be whatever + * we set to the card, whereas CURRENT_SSID is the one that + * may change... - Jean II */ + u16 rid; + + *active = 1; + + rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : + HERMES_RID_CNFDESIREDSSID; + + err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), + NULL, &essidbuf); + if (err) + goto fail_unlock; + } else { + *active = 0; + + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, + sizeof(essidbuf), NULL, &essidbuf); + if (err) + goto fail_unlock; + } + + len = le16_to_cpu(essidbuf.len); + BUG_ON(len > IW_ESSID_MAX_SIZE); + + memset(buf, 0, IW_ESSID_MAX_SIZE); + memcpy(buf, p, len); + err = len; + + fail_unlock: + orinoco_unlock(priv, &flags); + + return err; +} + +static long orinoco_hw_get_freq(struct orinoco_private *priv) +{ + + hermes_t *hw = &priv->hw; + int err = 0; + u16 channel; + long freq = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel); + if (err) + goto out; + + /* Intersil firmware 1.3.5 returns 0 when the interface is down */ + if (channel == 0) { + err = -EBUSY; + goto out; + } + + if ( (channel < 1) || (channel > NUM_CHANNELS) ) { + printk(KERN_WARNING "%s: Channel out of range (%d)!\n", + priv->ndev->name, channel); + err = -EBUSY; + goto out; + + } + freq = channel_frequency[channel-1] * 100000; + + out: + orinoco_unlock(priv, &flags); + + if (err > 0) + err = -EBUSY; + return err ? err : freq; +} + +static int orinoco_hw_get_bitratelist(struct orinoco_private *priv, + int *numrates, s32 *rates, int max) +{ + hermes_t *hw = &priv->hw; + struct hermes_idstring list; + unsigned char *p = (unsigned char *)&list.val; + int err = 0; + int num; + int i; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, + sizeof(list), NULL, &list); + orinoco_unlock(priv, &flags); + + if (err) + return err; + + num = le16_to_cpu(list.len); + *numrates = num; + num = min(num, max); + + for (i = 0; i < num; i++) { + rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */ + } + + return 0; +} + +static int orinoco_ioctl_getname(struct net_device *dev, + struct iw_request_info *info, + char *name, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int numrates; + int err; + + err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0); + + if (!err && (numrates > 2)) + strcpy(name, "IEEE 802.11b"); + else + strcpy(name, "IEEE 802.11-DS"); + + return 0; +} + +static int orinoco_ioctl_setwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = -EINPROGRESS; /* Call commit handler */ + unsigned long flags; + static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + static const u8 any_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Enable automatic roaming - no sanity checks are needed */ + if (memcmp(&ap_addr->sa_data, off_addr, ETH_ALEN) == 0 || + memcmp(&ap_addr->sa_data, any_addr, ETH_ALEN) == 0) { + priv->bssid_fixed = 0; + memset(priv->desired_bssid, 0, ETH_ALEN); + + /* "off" means keep existing connection */ + if (ap_addr->sa_data[0] == 0) { + __orinoco_hw_set_wap(priv); + err = 0; + } + goto out; + } + + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) { + printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't " + "support manual roaming\n", + dev->name); + err = -EOPNOTSUPP; + goto out; + } + + if (priv->iw_mode != IW_MODE_INFRA) { + printk(KERN_WARNING "%s: Manual roaming supported only in " + "managed mode\n", dev->name); + err = -EOPNOTSUPP; + goto out; + } + + /* Intersil firmware hangs without Desired ESSID */ + if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL && + strlen(priv->desired_essid) == 0) { + printk(KERN_WARNING "%s: Desired ESSID must be set for " + "manual roaming\n", dev->name); + err = -EOPNOTSUPP; + goto out; + } + + /* Finally, enable manual roaming */ + priv->bssid_fixed = 1; + memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN); + + out: + orinoco_unlock(priv, &flags); + return err; +} + +static int orinoco_ioctl_getwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + + hermes_t *hw = &priv->hw; + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + ap_addr->sa_family = ARPHRD_ETHER; + err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, + ETH_ALEN, NULL, ap_addr->sa_data); + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_setmode(struct net_device *dev, + struct iw_request_info *info, + u32 *mode, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = -EINPROGRESS; /* Call commit handler */ + unsigned long flags; + + if (priv->iw_mode == *mode) + return 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (*mode) { + case IW_MODE_ADHOC: + if (!priv->has_ibss && !priv->has_port3) + err = -EOPNOTSUPP; + break; + + case IW_MODE_INFRA: + break; + + case IW_MODE_MONITOR: + if (priv->broken_monitor && !force_monitor) { + printk(KERN_WARNING "%s: Monitor mode support is " + "buggy in this firmware, not enabling\n", + dev->name); + err = -EOPNOTSUPP; + } + break; + + default: + err = -EOPNOTSUPP; + break; + } + + if (err == -EINPROGRESS) { + priv->iw_mode = *mode; + set_port_type(priv); + } + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getmode(struct net_device *dev, + struct iw_request_info *info, + u32 *mode, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + + *mode = priv->iw_mode; + return 0; +} + +static int orinoco_ioctl_getiwrange(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *rrq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + struct iw_range *range = (struct iw_range *) extra; + int numrates; + int i, k; + + rrq->length = sizeof(struct iw_range); + memset(range, 0, sizeof(struct iw_range)); + + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 22; + + /* Set available channels/frequencies */ + range->num_channels = NUM_CHANNELS; + k = 0; + for (i = 0; i < NUM_CHANNELS; i++) { + if (priv->channel_mask & (1 << i)) { + range->freq[k].i = i + 1; + range->freq[k].m = channel_frequency[i] * 100000; + range->freq[k].e = 1; + k++; + } + + if (k >= IW_MAX_FREQUENCIES) + break; + } + range->num_frequency = k; + range->sensitivity = 3; + + if (priv->has_wep) { + range->max_encoding_tokens = ORINOCO_MAX_KEYS; + range->encoding_size[0] = SMALL_KEY_SIZE; + range->num_encoding_sizes = 1; + + if (priv->has_big_wep) { + range->encoding_size[1] = LARGE_KEY_SIZE; + range->num_encoding_sizes = 2; + } + } + + if (priv->has_wpa) + range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_CIPHER_TKIP; + + if ((priv->iw_mode == IW_MODE_ADHOC) && (!SPY_NUMBER(priv))){ + /* Quality stats meaningless in ad-hoc mode */ + } else { + range->max_qual.qual = 0x8b - 0x2f; + range->max_qual.level = 0x2f - 0x95 - 1; + range->max_qual.noise = 0x2f - 0x95 - 1; + /* Need to get better values */ + range->avg_qual.qual = 0x24; + range->avg_qual.level = 0xC2; + range->avg_qual.noise = 0x9E; + } + + err = orinoco_hw_get_bitratelist(priv, &numrates, + range->bitrate, IW_MAX_BITRATES); + if (err) + return err; + range->num_bitrates = numrates; + + /* Set an indication of the max TCP throughput in bit/s that we can + * expect using this interface. May be use for QoS stuff... + * Jean II */ + if (numrates > 2) + range->throughput = 5 * 1000 * 1000; /* ~5 Mb/s */ + else + range->throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */ + + range->min_rts = 0; + range->max_rts = 2347; + range->min_frag = 256; + range->max_frag = 2346; + + range->min_pmp = 0; + range->max_pmp = 65535000; + range->min_pmt = 0; + range->max_pmt = 65535 * 1000; /* ??? */ + range->pmp_flags = IW_POWER_PERIOD; + range->pmt_flags = IW_POWER_TIMEOUT; + range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R; + + range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; + range->retry_flags = IW_RETRY_LIMIT; + range->r_time_flags = IW_RETRY_LIFETIME; + range->min_retry = 0; + range->max_retry = 65535; /* ??? */ + range->min_r_time = 0; + range->max_r_time = 65535 * 1000; /* ??? */ + + if (priv->firmware_type == FIRMWARE_TYPE_AGERE) + range->scan_capa = IW_SCAN_CAPA_ESSID; + else + range->scan_capa = IW_SCAN_CAPA_NONE; + + /* Event capability (kernel) */ + IW_EVENT_CAPA_SET_KERNEL(range->event_capa); + /* Event capability (driver) */ + IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY); + IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP); + IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN); + IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP); + + return 0; +} + +static int orinoco_ioctl_setiwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *keybuf) +{ + struct orinoco_private *priv = netdev_priv(dev); + int index = (erq->flags & IW_ENCODE_INDEX) - 1; + int setindex = priv->tx_key; + int encode_alg = priv->encode_alg; + int restricted = priv->wep_restrict; + u16 xlen = 0; + int err = -EINPROGRESS; /* Call commit handler */ + unsigned long flags; + + if (! priv->has_wep) + return -EOPNOTSUPP; + + if (erq->pointer) { + /* We actually have a key to set - check its length */ + if (erq->length > LARGE_KEY_SIZE) + return -E2BIG; + + if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep ) + return -E2BIG; + } + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Clear any TKIP key we have */ + if ((priv->has_wpa) && (priv->encode_alg == IW_ENCODE_ALG_TKIP)) + (void) orinoco_clear_tkip_key(priv, setindex); + + if (erq->length > 0) { + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) + index = priv->tx_key; + + /* Adjust key length to a supported value */ + if (erq->length > SMALL_KEY_SIZE) { + xlen = LARGE_KEY_SIZE; + } else if (erq->length > 0) { + xlen = SMALL_KEY_SIZE; + } else + xlen = 0; + + /* Switch on WEP if off */ + if ((encode_alg != IW_ENCODE_ALG_WEP) && (xlen > 0)) { + setindex = index; + encode_alg = IW_ENCODE_ALG_WEP; + } + } else { + /* Important note : if the user do "iwconfig eth0 enc off", + * we will arrive there with an index of -1. This is valid + * but need to be taken care off... Jean II */ + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) { + if((index != -1) || (erq->flags == 0)) { + err = -EINVAL; + goto out; + } + } else { + /* Set the index : Check that the key is valid */ + if(priv->keys[index].len == 0) { + err = -EINVAL; + goto out; + } + setindex = index; + } + } + + if (erq->flags & IW_ENCODE_DISABLED) + encode_alg = IW_ENCODE_ALG_NONE; + if (erq->flags & IW_ENCODE_OPEN) + restricted = 0; + if (erq->flags & IW_ENCODE_RESTRICTED) + restricted = 1; + + if (erq->pointer && erq->length > 0) { + priv->keys[index].len = cpu_to_le16(xlen); + memset(priv->keys[index].data, 0, + sizeof(priv->keys[index].data)); + memcpy(priv->keys[index].data, keybuf, erq->length); + } + priv->tx_key = setindex; + + /* Try fast key change if connected and only keys are changed */ + if ((priv->encode_alg == encode_alg) && + (priv->wep_restrict == restricted) && + netif_carrier_ok(dev)) { + err = __orinoco_hw_setup_wepkeys(priv); + /* No need to commit if successful */ + goto out; + } + + priv->encode_alg = encode_alg; + priv->wep_restrict = restricted; + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getiwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *keybuf) +{ + struct orinoco_private *priv = netdev_priv(dev); + int index = (erq->flags & IW_ENCODE_INDEX) - 1; + u16 xlen = 0; + unsigned long flags; + + if (! priv->has_wep) + return -EOPNOTSUPP; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) + index = priv->tx_key; + + erq->flags = 0; + if (!priv->encode_alg) + erq->flags |= IW_ENCODE_DISABLED; + erq->flags |= index + 1; + + if (priv->wep_restrict) + erq->flags |= IW_ENCODE_RESTRICTED; + else + erq->flags |= IW_ENCODE_OPEN; + + xlen = le16_to_cpu(priv->keys[index].len); + + erq->length = xlen; + + memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE); + + orinoco_unlock(priv, &flags); + return 0; +} + +static int orinoco_ioctl_setessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *essidbuf) +{ + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + + /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it + * anyway... - Jean II */ + + /* Hum... Should not use Wireless Extension constant (may change), + * should use our own... - Jean II */ + if (erq->length > IW_ESSID_MAX_SIZE) + return -E2BIG; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */ + memset(priv->desired_essid, 0, sizeof(priv->desired_essid)); + + /* If not ANY, get the new ESSID */ + if (erq->flags) { + memcpy(priv->desired_essid, essidbuf, erq->length); + } + + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_getessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, + char *essidbuf) +{ + struct orinoco_private *priv = netdev_priv(dev); + int active; + int err = 0; + unsigned long flags; + + if (netif_running(dev)) { + err = orinoco_hw_get_essid(priv, &active, essidbuf); + if (err < 0) + return err; + erq->length = err; + } else { + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE); + erq->length = strlen(priv->desired_essid); + orinoco_unlock(priv, &flags); + } + + erq->flags = 1; + + return 0; +} + +static int orinoco_ioctl_setnick(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *nrq, + char *nickbuf) +{ + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + + if (nrq->length > IW_ESSID_MAX_SIZE) + return -E2BIG; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + memset(priv->nick, 0, sizeof(priv->nick)); + memcpy(priv->nick, nickbuf, nrq->length); + + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_getnick(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *nrq, + char *nickbuf) +{ + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE); + orinoco_unlock(priv, &flags); + + nrq->length = strlen(priv->nick); + + return 0; +} + +static int orinoco_ioctl_setfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *frq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int chan = -1; + unsigned long flags; + int err = -EINPROGRESS; /* Call commit handler */ + + /* In infrastructure mode the AP sets the channel */ + if (priv->iw_mode == IW_MODE_INFRA) + return -EBUSY; + + if ( (frq->e == 0) && (frq->m <= 1000) ) { + /* Setting by channel number */ + chan = frq->m; + } else { + /* Setting by frequency - search the table */ + int mult = 1; + int i; + + for (i = 0; i < (6 - frq->e); i++) + mult *= 10; + + for (i = 0; i < NUM_CHANNELS; i++) + if (frq->m == (channel_frequency[i] * mult)) + chan = i+1; + } + + if ( (chan < 1) || (chan > NUM_CHANNELS) || + ! (priv->channel_mask & (1 << (chan-1)) ) ) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + priv->channel = chan; + if (priv->iw_mode == IW_MODE_MONITOR) { + /* Fast channel change - no commit if successful */ + hermes_t *hw = &priv->hw; + err = hermes_docmd_wait(hw, HERMES_CMD_TEST | + HERMES_TEST_SET_CHANNEL, + chan, NULL); + } + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *frq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int tmp; + + /* Locking done in there */ + tmp = orinoco_hw_get_freq(priv); + if (tmp < 0) { + return tmp; + } + + frq->m = tmp; + frq->e = 1; + + return 0; +} + +static int orinoco_ioctl_getsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *srq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + u16 val; + int err; + unsigned long flags; + + if (!priv->has_sensitivity) + return -EOPNOTSUPP; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFSYSTEMSCALE, &val); + orinoco_unlock(priv, &flags); + + if (err) + return err; + + srq->value = val; + srq->fixed = 0; /* auto */ + + return 0; +} + +static int orinoco_ioctl_setsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *srq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int val = srq->value; + unsigned long flags; + + if (!priv->has_sensitivity) + return -EOPNOTSUPP; + + if ((val < 1) || (val > 3)) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + priv->ap_density = val; + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_setrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int val = rrq->value; + unsigned long flags; + + if (rrq->disabled) + val = 2347; + + if ( (val < 0) || (val > 2347) ) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + priv->rts_thresh = val; + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_getrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + + rrq->value = priv->rts_thresh; + rrq->disabled = (rrq->value == 2347); + rrq->fixed = 1; + + return 0; +} + +static int orinoco_ioctl_setfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *frq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = -EINPROGRESS; /* Call commit handler */ + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (priv->has_mwo) { + if (frq->disabled) + priv->mwo_robust = 0; + else { + if (frq->fixed) + printk(KERN_WARNING "%s: Fixed fragmentation is " + "not supported on this firmware. " + "Using MWO robust instead.\n", dev->name); + priv->mwo_robust = 1; + } + } else { + if (frq->disabled) + priv->frag_thresh = 2346; + else { + if ( (frq->value < 256) || (frq->value > 2346) ) + err = -EINVAL; + else + priv->frag_thresh = frq->value & ~0x1; /* must be even */ + } + } + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *frq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err; + u16 val; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (priv->has_mwo) { + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMWOROBUST_AGERE, + &val); + if (err) + val = 0; + + frq->value = val ? 2347 : 0; + frq->disabled = ! val; + frq->fixed = 0; + } else { + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD, + &val); + if (err) + val = 0; + + frq->value = val; + frq->disabled = (val >= 2346); + frq->fixed = 1; + } + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_setrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int ratemode = -1; + int bitrate; /* 100s of kilobits */ + int i; + unsigned long flags; + + /* As the user space doesn't know our highest rate, it uses -1 + * to ask us to set the highest rate. Test it using "iwconfig + * ethX rate auto" - Jean II */ + if (rrq->value == -1) + bitrate = 110; + else { + if (rrq->value % 100000) + return -EINVAL; + bitrate = rrq->value / 100000; + } + + if ( (bitrate != 10) && (bitrate != 20) && + (bitrate != 55) && (bitrate != 110) ) + return -EINVAL; + + for (i = 0; i < BITRATE_TABLE_SIZE; i++) + if ( (bitrate_table[i].bitrate == bitrate) && + (bitrate_table[i].automatic == ! rrq->fixed) ) { + ratemode = i; + break; + } + + if (ratemode == -1) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + priv->bitratemode = ratemode; + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; +} + +static int orinoco_ioctl_getrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + int ratemode; + int i; + u16 val; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + ratemode = priv->bitratemode; + + BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE)); + + rrq->value = bitrate_table[ratemode].bitrate * 100000; + rrq->fixed = ! bitrate_table[ratemode].automatic; + rrq->disabled = 0; + + /* If the interface is running we try to find more about the + current mode */ + if (netif_running(dev)) { + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CURRENTTXRATE, &val); + if (err) + goto out; + + switch (priv->firmware_type) { + case FIRMWARE_TYPE_AGERE: /* Lucent style rate */ + /* Note : in Lucent firmware, the return value of + * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s, + * and therefore is totally different from the + * encoding of HERMES_RID_CNFTXRATECONTROL. + * Don't forget that 6Mb/s is really 5.5Mb/s */ + if (val == 6) + rrq->value = 5500000; + else + rrq->value = val * 1000000; + break; + case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */ + case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */ + for (i = 0; i < BITRATE_TABLE_SIZE; i++) + if (bitrate_table[i].intersil_txratectrl == val) { + ratemode = i; + break; + } + if (i >= BITRATE_TABLE_SIZE) + printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n", + dev->name, val); + + rrq->value = bitrate_table[ratemode].bitrate * 100000; + break; + default: + BUG(); + } + } + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_setpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *prq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = -EINPROGRESS; /* Call commit handler */ + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (prq->disabled) { + priv->pm_on = 0; + } else { + switch (prq->flags & IW_POWER_MODE) { + case IW_POWER_UNICAST_R: + priv->pm_mcast = 0; + priv->pm_on = 1; + break; + case IW_POWER_ALL_R: + priv->pm_mcast = 1; + priv->pm_on = 1; + break; + case IW_POWER_ON: + /* No flags : but we may have a value - Jean II */ + break; + default: + err = -EINVAL; + goto out; + } + + if (prq->flags & IW_POWER_TIMEOUT) { + priv->pm_on = 1; + priv->pm_timeout = prq->value / 1000; + } + if (prq->flags & IW_POWER_PERIOD) { + priv->pm_on = 1; + priv->pm_period = prq->value / 1000; + } + /* It's valid to not have a value if we are just toggling + * the flags... Jean II */ + if(!priv->pm_on) { + err = -EINVAL; + goto out; + } + } + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *prq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + u16 enable, period, timeout, mcast; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, + HERMES_RID_CNFMAXSLEEPDURATION, &period); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast); + if (err) + goto out; + + prq->disabled = !enable; + /* Note : by default, display the period */ + if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { + prq->flags = IW_POWER_TIMEOUT; + prq->value = timeout * 1000; + } else { + prq->flags = IW_POWER_PERIOD; + prq->value = period * 1000; + } + if (mcast) + prq->flags |= IW_POWER_ALL_R; + else + prq->flags |= IW_POWER_UNICAST_R; + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_set_encodeext(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int idx, alg = ext->alg, set_key = 1; + unsigned long flags; + int err = -EINVAL; + u16 key_len; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Determine and validate the key index */ + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if ((idx < 1) || (idx > 4)) + goto out; + idx--; + } else + idx = priv->tx_key; + + if (encoding->flags & IW_ENCODE_DISABLED) + alg = IW_ENCODE_ALG_NONE; + + if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) { + /* Clear any TKIP TX key we had */ + (void) orinoco_clear_tkip_key(priv, priv->tx_key); + } + + if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { + priv->tx_key = idx; + set_key = ((alg == IW_ENCODE_ALG_TKIP) || + (ext->key_len > 0)) ? 1 : 0; + } + + if (set_key) { + /* Set the requested key first */ + switch (alg) { + case IW_ENCODE_ALG_NONE: + priv->encode_alg = alg; + priv->keys[idx].len = 0; + break; + + case IW_ENCODE_ALG_WEP: + if (ext->key_len > SMALL_KEY_SIZE) + key_len = LARGE_KEY_SIZE; + else if (ext->key_len > 0) + key_len = SMALL_KEY_SIZE; + else + goto out; + + priv->encode_alg = alg; + priv->keys[idx].len = cpu_to_le16(key_len); + + key_len = min(ext->key_len, key_len); + + memset(priv->keys[idx].data, 0, ORINOCO_MAX_KEY_SIZE); + memcpy(priv->keys[idx].data, ext->key, key_len); + break; + + case IW_ENCODE_ALG_TKIP: + { + hermes_t *hw = &priv->hw; + u8 *tkip_iv = NULL; + + if (!priv->has_wpa || + (ext->key_len > sizeof(priv->tkip_key[0]))) + goto out; + + priv->encode_alg = alg; + memset(&priv->tkip_key[idx], 0, + sizeof(priv->tkip_key[idx])); + memcpy(&priv->tkip_key[idx], ext->key, ext->key_len); + + if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) + tkip_iv = &ext->rx_seq[0]; + + err = __orinoco_hw_set_tkip_key(hw, idx, + ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY, + (u8 *) &priv->tkip_key[idx], + tkip_iv, NULL); + if (err) + printk(KERN_ERR "%s: Error %d setting TKIP key" + "\n", dev->name, err); + + goto out; + } + default: + goto out; + } + } + err = -EINPROGRESS; + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_get_encodeext(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int idx, max_key_len; + unsigned long flags; + int err; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = -EINVAL; + max_key_len = encoding->length - sizeof(*ext); + if (max_key_len < 0) + goto out; + + idx = encoding->flags & IW_ENCODE_INDEX; + if (idx) { + if ((idx < 1) || (idx > 4)) + goto out; + idx--; + } else + idx = priv->tx_key; + + encoding->flags = idx + 1; + memset(ext, 0, sizeof(*ext)); + + ext->alg = priv->encode_alg; + switch (priv->encode_alg) { + case IW_ENCODE_ALG_NONE: + ext->key_len = 0; + encoding->flags |= IW_ENCODE_DISABLED; + break; + case IW_ENCODE_ALG_WEP: + ext->key_len = min_t(u16, le16_to_cpu(priv->keys[idx].len), + max_key_len); + memcpy(ext->key, priv->keys[idx].data, ext->key_len); + encoding->flags |= IW_ENCODE_ENABLED; + break; + case IW_ENCODE_ALG_TKIP: + ext->key_len = min_t(u16, sizeof(struct orinoco_tkip_key), + max_key_len); + memcpy(ext->key, &priv->tkip_key[idx], ext->key_len); + encoding->flags |= IW_ENCODE_ENABLED; + break; + } + + err = 0; + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_set_auth(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + struct iw_param *param = &wrqu->param; + unsigned long flags; + int ret = -EINPROGRESS; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (param->flags & IW_AUTH_INDEX) { + case IW_AUTH_WPA_VERSION: + case IW_AUTH_CIPHER_PAIRWISE: + case IW_AUTH_CIPHER_GROUP: + case IW_AUTH_RX_UNENCRYPTED_EAPOL: + case IW_AUTH_PRIVACY_INVOKED: + case IW_AUTH_DROP_UNENCRYPTED: + /* + * orinoco does not use these parameters + */ + break; + + case IW_AUTH_KEY_MGMT: + /* wl_lkm implies value 2 == PSK for Hermes I + * which ties in with WEXT + * no other hints tho :( + */ + priv->key_mgmt = param->value; + break; + + case IW_AUTH_TKIP_COUNTERMEASURES: + /* When countermeasures are enabled, shut down the + * card; when disabled, re-enable the card. This must + * take effect immediately. + * + * TODO: Make sure that the EAPOL message is getting + * out before card disabled + */ + if (param->value) { + priv->tkip_cm_active = 1; + ret = hermes_enable_port(hw, 0); + } else { + priv->tkip_cm_active = 0; + ret = hermes_disable_port(hw, 0); + } + break; + + case IW_AUTH_80211_AUTH_ALG: + if (param->value & IW_AUTH_ALG_SHARED_KEY) + priv->wep_restrict = 1; + else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) + priv->wep_restrict = 0; + else + ret = -EINVAL; + break; + + case IW_AUTH_WPA_ENABLED: + if (priv->has_wpa) { + priv->wpa_enabled = param->value ? 1 : 0; + } else { + if (param->value) + ret = -EOPNOTSUPP; + /* else silently accept disable of WPA */ + priv->wpa_enabled = 0; + } + break; + + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + +static int orinoco_ioctl_get_auth(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct iw_param *param = &wrqu->param; + unsigned long flags; + int ret = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (param->flags & IW_AUTH_INDEX) { + case IW_AUTH_KEY_MGMT: + param->value = priv->key_mgmt; + break; + + case IW_AUTH_TKIP_COUNTERMEASURES: + param->value = priv->tkip_cm_active; + break; + + case IW_AUTH_80211_AUTH_ALG: + if (priv->wep_restrict) + param->value = IW_AUTH_ALG_SHARED_KEY; + else + param->value = IW_AUTH_ALG_OPEN_SYSTEM; + break; + + case IW_AUTH_WPA_ENABLED: + param->value = priv->wpa_enabled; + break; + + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + +static int orinoco_ioctl_set_genie(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + u8 *buf; + unsigned long flags; + int err = 0; + + /* cut off at IEEE80211_MAX_DATA_LEN */ + if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) || + (wrqu->data.length && (extra == NULL))) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (wrqu->data.length) { + buf = kmalloc(wrqu->data.length, GFP_KERNEL); + if (buf == NULL) { + err = -ENOMEM; + goto out; + } + + memcpy(buf, extra, wrqu->data.length); + kfree(priv->wpa_ie); + priv->wpa_ie = buf; + priv->wpa_ie_len = wrqu->data.length; + } else { + kfree(priv->wpa_ie); + priv->wpa_ie = NULL; + priv->wpa_ie_len = 0; + } + + if (priv->wpa_ie) { + /* Looks like wl_lkm wants to check the auth alg, and + * somehow pass it to the firmware. + * Instead it just calls the key mgmt rid + * - we do this in set auth. + */ + } + +out: + orinoco_unlock(priv, &flags); + return err; +} + +static int orinoco_ioctl_get_genie(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) { + wrqu->data.length = 0; + goto out; + } + + if (wrqu->data.length < priv->wpa_ie_len) { + err = -E2BIG; + goto out; + } + + wrqu->data.length = priv->wpa_ie_len; + memcpy(extra, priv->wpa_ie, priv->wpa_ie_len); + +out: + orinoco_unlock(priv, &flags); + return err; +} + +static int orinoco_ioctl_set_mlme(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + struct iw_mlme *mlme = (struct iw_mlme *)extra; + unsigned long flags; + int ret = 0; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (mlme->cmd) { + case IW_MLME_DEAUTH: + /* silently ignore */ + break; + + case IW_MLME_DISASSOC: + { + struct { + u8 addr[ETH_ALEN]; + __le16 reason_code; + } __attribute__ ((packed)) buf; + + memcpy(buf.addr, mlme->addr.sa_data, ETH_ALEN); + buf.reason_code = cpu_to_le16(mlme->reason_code); + ret = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFDISASSOCIATE, + &buf); + break; + } + default: + ret = -EOPNOTSUPP; + } + + orinoco_unlock(priv, &flags); + return ret; +} + +static int orinoco_ioctl_getretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int err = 0; + u16 short_limit, long_limit, lifetime; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT, + &short_limit); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT, + &long_limit); + if (err) + goto out; + + err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME, + &lifetime); + if (err) + goto out; + + rrq->disabled = 0; /* Can't be disabled */ + + /* Note : by default, display the retry number */ + if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { + rrq->flags = IW_RETRY_LIFETIME; + rrq->value = lifetime * 1000; /* ??? */ + } else { + /* By default, display the min number */ + if ((rrq->flags & IW_RETRY_LONG)) { + rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; + rrq->value = long_limit; + } else { + rrq->flags = IW_RETRY_LIMIT; + rrq->value = short_limit; + if(short_limit != long_limit) + rrq->flags |= IW_RETRY_SHORT; + } + } + + out: + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_reset(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + + if (! capable(CAP_NET_ADMIN)) + return -EPERM; + + if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) { + printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name); + + /* Firmware reset */ + orinoco_reset(&priv->reset_work); + } else { + printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name); + + schedule_work(&priv->reset_work); + } + + return 0; +} + +static int orinoco_ioctl_setibssport(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) + +{ + struct orinoco_private *priv = netdev_priv(dev); + int val = *( (int *) extra ); + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + priv->ibss_port = val ; + + /* Actually update the mode we are using */ + set_port_type(priv); + + orinoco_unlock(priv, &flags); + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_getibssport(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int *val = (int *) extra; + + *val = priv->ibss_port; + return 0; +} + +static int orinoco_ioctl_setport3(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int val = *( (int *) extra ); + int err = 0; + unsigned long flags; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + switch (val) { + case 0: /* Try to do IEEE ad-hoc mode */ + if (! priv->has_ibss) { + err = -EINVAL; + break; + } + priv->prefer_port3 = 0; + + break; + + case 1: /* Try to do Lucent proprietary ad-hoc mode */ + if (! priv->has_port3) { + err = -EINVAL; + break; + } + priv->prefer_port3 = 1; + break; + + default: + err = -EINVAL; + } + + if (! err) { + /* Actually update the mode we are using */ + set_port_type(priv); + err = -EINPROGRESS; + } + + orinoco_unlock(priv, &flags); + + return err; +} + +static int orinoco_ioctl_getport3(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int *val = (int *) extra; + + *val = priv->prefer_port3; + return 0; +} + +static int orinoco_ioctl_setpreamble(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int val; + + if (! priv->has_preamble) + return -EOPNOTSUPP; + + /* 802.11b has recently defined some short preamble. + * Basically, the Phy header has been reduced in size. + * This increase performance, especially at high rates + * (the preamble is transmitted at 1Mb/s), unfortunately + * this give compatibility troubles... - Jean II */ + val = *( (int *) extra ); + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (val) + priv->preamble = 1; + else + priv->preamble = 0; + + orinoco_unlock(priv, &flags); + + return -EINPROGRESS; /* Call commit handler */ +} + +static int orinoco_ioctl_getpreamble(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int *val = (int *) extra; + + if (! priv->has_preamble) + return -EOPNOTSUPP; + + *val = priv->preamble; + return 0; +} + +/* ioctl interface to hermes_read_ltv() + * To use with iwpriv, pass the RID as the token argument, e.g. + * iwpriv get_rid [0xfc00] + * At least Wireless Tools 25 is required to use iwpriv. + * For Wireless Tools 25 and 26 append "dummy" are the end. */ +static int orinoco_ioctl_getrid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + int rid = data->flags; + u16 length; + int err; + unsigned long flags; + + /* It's a "get" function, but we don't want users to access the + * WEP key and other raw firmware data */ + if (! capable(CAP_NET_ADMIN)) + return -EPERM; + + if (rid < 0xfc00 || rid > 0xffff) + return -EINVAL; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length, + extra); + if (err) + goto out; + + data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length), + MAX_RID_LEN); + + out: + orinoco_unlock(priv, &flags); + return err; +} + +/* Trigger a scan (look for other cells in the vicinity) */ +static int orinoco_ioctl_setscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *srq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + hermes_t *hw = &priv->hw; + struct iw_scan_req *si = (struct iw_scan_req *) extra; + int err = 0; + unsigned long flags; + + /* Note : you may have realised that, as this is a SET operation, + * this is privileged and therefore a normal user can't + * perform scanning. + * This is not an error, while the device perform scanning, + * traffic doesn't flow, so it's a perfect DoS... + * Jean II */ + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + /* Scanning with port 0 disabled would fail */ + if (!netif_running(dev)) { + err = -ENETDOWN; + goto out; + } + + /* In monitor mode, the scan results are always empty. + * Probe responses are passed to the driver as received + * frames and could be processed in software. */ + if (priv->iw_mode == IW_MODE_MONITOR) { + err = -EOPNOTSUPP; + goto out; + } + + /* Note : because we don't lock out the irq handler, the way + * we access scan variables in priv is critical. + * o scan_inprogress : not touched by irq handler + * o scan_mode : not touched by irq handler + * Before modifying anything on those variables, please think hard ! + * Jean II */ + + /* Save flags */ + priv->scan_mode = srq->flags; + + /* Always trigger scanning, even if it's in progress. + * This way, if the info frame get lost, we will recover somewhat + * gracefully - Jean II */ + + if (priv->has_hostscan) { + switch (priv->firmware_type) { + case FIRMWARE_TYPE_SYMBOL: + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFHOSTSCAN_SYMBOL, + HERMES_HOSTSCAN_SYMBOL_ONCE | + HERMES_HOSTSCAN_SYMBOL_BCAST); + break; + case FIRMWARE_TYPE_INTERSIL: { + __le16 req[3]; + + req[0] = cpu_to_le16(0x3fff); /* All channels */ + req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */ + req[2] = 0; /* Any ESSID */ + err = HERMES_WRITE_RECORD(hw, USER_BAP, + HERMES_RID_CNFHOSTSCAN, &req); + } + break; + case FIRMWARE_TYPE_AGERE: + if (priv->scan_mode & IW_SCAN_THIS_ESSID) { + struct hermes_idstring idbuf; + size_t len = min(sizeof(idbuf.val), + (size_t) si->essid_len); + idbuf.len = cpu_to_le16(len); + memcpy(idbuf.val, si->essid, len); + + err = hermes_write_ltv(hw, USER_BAP, + HERMES_RID_CNFSCANSSID_AGERE, + HERMES_BYTES_TO_RECLEN(len + 2), + &idbuf); + } else + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSCANSSID_AGERE, + 0); /* Any ESSID */ + if (err) + break; + + if (priv->has_ext_scan) { + /* Clear scan results at the start of + * an extended scan */ + orinoco_clear_scan_results(priv, + msecs_to_jiffies(15000)); + + /* TODO: Is this available on older firmware? + * Can we use it to scan specific channels + * for IW_SCAN_THIS_FREQ? */ + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFSCANCHANNELS2GHZ, + 0x7FFF); + if (err) + goto out; + + err = hermes_inquire(hw, + HERMES_INQ_CHANNELINFO); + } else + err = hermes_inquire(hw, HERMES_INQ_SCAN); + break; + } + } else + err = hermes_inquire(hw, HERMES_INQ_SCAN); + + /* One more client */ + if (! err) + priv->scan_inprogress = 1; + + out: + orinoco_unlock(priv, &flags); + return err; +} + +#define MAX_CUSTOM_LEN 64 + +/* Translate scan data returned from the card to a card independant + * format that the Wireless Tools will understand - Jean II */ +static inline char *orinoco_translate_scan(struct net_device *dev, + struct iw_request_info *info, + char *current_ev, + char *end_buf, + union hermes_scan_info *bss, + unsigned int last_scanned) +{ + struct orinoco_private *priv = netdev_priv(dev); + u16 capabilities; + u16 channel; + struct iw_event iwe; /* Temporary buffer */ + char custom[MAX_CUSTOM_LEN]; + + memset(&iwe, 0, sizeof(iwe)); + + /* First entry *MUST* be the AP MAC address */ + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, bss->a.bssid, ETH_ALEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); + + /* Other entries will be displayed in the order we give them */ + + /* Add the ESSID */ + iwe.u.data.length = le16_to_cpu(bss->a.essid_len); + if (iwe.u.data.length > 32) + iwe.u.data.length = 32; + iwe.cmd = SIOCGIWESSID; + iwe.u.data.flags = 1; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, bss->a.essid); + + /* Add mode */ + iwe.cmd = SIOCGIWMODE; + capabilities = le16_to_cpu(bss->a.capabilities); + if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { + if (capabilities & WLAN_CAPABILITY_ESS) + iwe.u.mode = IW_MODE_MASTER; + else + iwe.u.mode = IW_MODE_ADHOC; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); + } + + channel = bss->s.channel; + if ((channel >= 1) && (channel <= NUM_CHANNELS)) { + /* Add channel and frequency */ + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = channel; + iwe.u.freq.e = 0; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + + iwe.u.freq.m = channel_frequency[channel-1] * 100000; + iwe.u.freq.e = 1; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + } + + /* Add quality statistics. level and noise in dB. No link quality */ + iwe.cmd = IWEVQUAL; + iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID; + iwe.u.qual.level = (__u8) le16_to_cpu(bss->a.level) - 0x95; + iwe.u.qual.noise = (__u8) le16_to_cpu(bss->a.noise) - 0x95; + /* Wireless tools prior to 27.pre22 will show link quality + * anyway, so we provide a reasonable value. */ + if (iwe.u.qual.level > iwe.u.qual.noise) + iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; + else + iwe.u.qual.qual = 0; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); + + /* Add encryption capability */ + iwe.cmd = SIOCGIWENCODE; + if (capabilities & WLAN_CAPABILITY_PRIVACY) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, NULL); + + /* Bit rate is not available in Lucent/Agere firmwares */ + if (priv->firmware_type != FIRMWARE_TYPE_AGERE) { + char *current_val = current_ev + iwe_stream_lcp_len(info); + int i; + int step; + + if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL) + step = 2; + else + step = 1; + + iwe.cmd = SIOCGIWRATE; + /* Those two flags are ignored... */ + iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; + /* Max 10 values */ + for (i = 0; i < 10; i += step) { + /* NULL terminated */ + if (bss->p.rates[i] == 0x0) + break; + /* Bit rate given in 500 kb/s units (+ 0x80) */ + iwe.u.bitrate.value = + ((bss->p.rates[i] & 0x7f) * 500000); + current_val = iwe_stream_add_value(info, current_ev, + current_val, + end_buf, &iwe, + IW_EV_PARAM_LEN); + } + /* Check if we added any event */ + if ((current_val - current_ev) > iwe_stream_lcp_len(info)) + current_ev = current_val; + } + + /* Beacon interval */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + "bcn_int=%d", + le16_to_cpu(bss->a.beacon_interv)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Capabilites */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + "capab=0x%04x", + capabilities); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Add EXTRA: Age to display seconds since last beacon/probe response + * for given network. */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + " Last beacon: %dms ago", + jiffies_to_msecs(jiffies - last_scanned)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + return current_ev; +} + +static inline char *orinoco_translate_ext_scan(struct net_device *dev, + struct iw_request_info *info, + char *current_ev, + char *end_buf, + struct agere_ext_scan_info *bss, + unsigned int last_scanned) +{ + u16 capabilities; + u16 channel; + struct iw_event iwe; /* Temporary buffer */ + char custom[MAX_CUSTOM_LEN]; + u8 *ie; + + memset(&iwe, 0, sizeof(iwe)); + + /* First entry *MUST* be the AP MAC address */ + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN); + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_ADDR_LEN); + + /* Other entries will be displayed in the order we give them */ + + /* Add the ESSID */ + ie = bss->data; + iwe.u.data.length = ie[1]; + if (iwe.u.data.length) { + if (iwe.u.data.length > 32) + iwe.u.data.length = 32; + iwe.cmd = SIOCGIWESSID; + iwe.u.data.flags = 1; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, &ie[2]); + } + + /* Add mode */ + capabilities = le16_to_cpu(bss->capabilities); + if (capabilities & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { + iwe.cmd = SIOCGIWMODE; + if (capabilities & WLAN_CAPABILITY_ESS) + iwe.u.mode = IW_MODE_MASTER; + else + iwe.u.mode = IW_MODE_ADHOC; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_UINT_LEN); + } + + ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_DS_PARAMS); + channel = ie ? ie[2] : 0; + if ((channel >= 1) && (channel <= NUM_CHANNELS)) { + /* Add channel and frequency */ + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = channel; + iwe.u.freq.e = 0; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + + iwe.u.freq.m = channel_frequency[channel-1] * 100000; + iwe.u.freq.e = 1; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_FREQ_LEN); + } + + /* Add quality statistics. level and noise in dB. No link quality */ + iwe.cmd = IWEVQUAL; + iwe.u.qual.updated = IW_QUAL_DBM | IW_QUAL_QUAL_INVALID; + iwe.u.qual.level = bss->level - 0x95; + iwe.u.qual.noise = bss->noise - 0x95; + /* Wireless tools prior to 27.pre22 will show link quality + * anyway, so we provide a reasonable value. */ + if (iwe.u.qual.level > iwe.u.qual.noise) + iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise; + else + iwe.u.qual.qual = 0; + current_ev = iwe_stream_add_event(info, current_ev, end_buf, + &iwe, IW_EV_QUAL_LEN); + + /* Add encryption capability */ + iwe.cmd = SIOCGIWENCODE; + if (capabilities & WLAN_CAPABILITY_PRIVACY) + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + else + iwe.u.data.flags = IW_ENCODE_DISABLED; + iwe.u.data.length = 0; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, NULL); + + /* WPA IE */ + ie = orinoco_get_wpa_ie(bss->data, sizeof(bss->data)); + if (ie) { + iwe.cmd = IWEVGENIE; + iwe.u.data.length = ie[1] + 2; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, ie); + } + + /* RSN IE */ + ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_RSN); + if (ie) { + iwe.cmd = IWEVGENIE; + iwe.u.data.length = ie[1] + 2; + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, ie); + } + + ie = orinoco_get_ie(bss->data, sizeof(bss->data), WLAN_EID_SUPP_RATES); + if (ie) { + char *p = current_ev + iwe_stream_lcp_len(info); + int i; + + iwe.cmd = SIOCGIWRATE; + /* Those two flags are ignored... */ + iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; + + for (i = 2; i < (ie[1] + 2); i++) { + iwe.u.bitrate.value = ((ie[i] & 0x7F) * 500000); + p = iwe_stream_add_value(info, current_ev, p, end_buf, + &iwe, IW_EV_PARAM_LEN); + } + /* Check if we added any event */ + if (p > (current_ev + iwe_stream_lcp_len(info))) + current_ev = p; + } + + /* Timestamp */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = + snprintf(custom, MAX_CUSTOM_LEN, "tsf=%016llx", + (unsigned long long) le64_to_cpu(bss->timestamp)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Beacon interval */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + "bcn_int=%d", + le16_to_cpu(bss->beacon_interval)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Capabilites */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + "capab=0x%04x", + capabilities); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + /* Add EXTRA: Age to display seconds since last beacon/probe response + * for given network. */ + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = snprintf(custom, MAX_CUSTOM_LEN, + " Last beacon: %dms ago", + jiffies_to_msecs(jiffies - last_scanned)); + if (iwe.u.data.length) + current_ev = iwe_stream_add_point(info, current_ev, end_buf, + &iwe, custom); + + return current_ev; +} + +/* Return results of a scan */ +static int orinoco_ioctl_getscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *srq, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + int err = 0; + unsigned long flags; + char *current_ev = extra; + + if (orinoco_lock(priv, &flags) != 0) + return -EBUSY; + + if (priv->scan_inprogress) { + /* Important note : we don't want to block the caller + * until results are ready for various reasons. + * First, managing wait queues is complex and racy. + * Second, we grab some rtnetlink lock before comming + * here (in dev_ioctl()). + * Third, we generate an Wireless Event, so the + * caller can wait itself on that - Jean II */ + err = -EAGAIN; + goto out; + } + + if (priv->has_ext_scan) { + struct xbss_element *bss; + + list_for_each_entry(bss, &priv->bss_list, list) { + /* Translate this entry to WE format */ + current_ev = + orinoco_translate_ext_scan(dev, info, + current_ev, + extra + srq->length, + &bss->bss, + bss->last_scanned); + + /* Check if there is space for one more entry */ + if ((extra + srq->length - current_ev) + <= IW_EV_ADDR_LEN) { + /* Ask user space to try again with a + * bigger buffer */ + err = -E2BIG; + goto out; + } + } + + } else { + struct bss_element *bss; + + list_for_each_entry(bss, &priv->bss_list, list) { + /* Translate this entry to WE format */ + current_ev = orinoco_translate_scan(dev, info, + current_ev, + extra + srq->length, + &bss->bss, + bss->last_scanned); + + /* Check if there is space for one more entry */ + if ((extra + srq->length - current_ev) + <= IW_EV_ADDR_LEN) { + /* Ask user space to try again with a + * bigger buffer */ + err = -E2BIG; + goto out; + } + } + } + + srq->length = (current_ev - extra); + srq->flags = (__u16) priv->scan_mode; + +out: + orinoco_unlock(priv, &flags); + return err; +} + +/* Commit handler, called after set operations */ +static int orinoco_ioctl_commit(struct net_device *dev, + struct iw_request_info *info, + void *wrqu, + char *extra) +{ + struct orinoco_private *priv = netdev_priv(dev); + struct hermes *hw = &priv->hw; + unsigned long flags; + int err = 0; + + if (!priv->open) + return 0; + + if (priv->broken_disableport) { + orinoco_reset(&priv->reset_work); + return 0; + } + + if (orinoco_lock(priv, &flags) != 0) + return err; + + err = hermes_disable_port(hw, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to disable port " + "while reconfiguring card\n", dev->name); + priv->broken_disableport = 1; + goto out; + } + + err = __orinoco_program_rids(dev); + if (err) { + printk(KERN_WARNING "%s: Unable to reconfigure card\n", + dev->name); + goto out; + } + + err = hermes_enable_port(hw, 0); + if (err) { + printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n", + dev->name); + goto out; + } + + out: + if (err) { + printk(KERN_WARNING "%s: Resetting instead...\n", dev->name); + schedule_work(&priv->reset_work); + err = 0; + } + + orinoco_unlock(priv, &flags); + return err; +} + +static const struct iw_priv_args orinoco_privtab[] = { + { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" }, + { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" }, + { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_port3" }, + { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_port3" }, + { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_preamble" }, + { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_preamble" }, + { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + 0, "set_ibssport" }, + { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + "get_ibssport" }, + { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN, + "get_rid" }, +}; + + +/* + * Structures to export the Wireless Handlers + */ + +#define STD_IW_HANDLER(id, func) \ + [IW_IOCTL_IDX(id)] = (iw_handler) func +static const iw_handler orinoco_handler[] = { + STD_IW_HANDLER(SIOCSIWCOMMIT, orinoco_ioctl_commit), + STD_IW_HANDLER(SIOCGIWNAME, orinoco_ioctl_getname), + STD_IW_HANDLER(SIOCSIWFREQ, orinoco_ioctl_setfreq), + STD_IW_HANDLER(SIOCGIWFREQ, orinoco_ioctl_getfreq), + STD_IW_HANDLER(SIOCSIWMODE, orinoco_ioctl_setmode), + STD_IW_HANDLER(SIOCGIWMODE, orinoco_ioctl_getmode), + STD_IW_HANDLER(SIOCSIWSENS, orinoco_ioctl_setsens), + STD_IW_HANDLER(SIOCGIWSENS, orinoco_ioctl_getsens), + STD_IW_HANDLER(SIOCGIWRANGE, orinoco_ioctl_getiwrange), + STD_IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy), + STD_IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy), + STD_IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy), + STD_IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy), + STD_IW_HANDLER(SIOCSIWAP, orinoco_ioctl_setwap), + STD_IW_HANDLER(SIOCGIWAP, orinoco_ioctl_getwap), + STD_IW_HANDLER(SIOCSIWSCAN, orinoco_ioctl_setscan), + STD_IW_HANDLER(SIOCGIWSCAN, orinoco_ioctl_getscan), + STD_IW_HANDLER(SIOCSIWESSID, orinoco_ioctl_setessid), + STD_IW_HANDLER(SIOCGIWESSID, orinoco_ioctl_getessid), + STD_IW_HANDLER(SIOCSIWNICKN, orinoco_ioctl_setnick), + STD_IW_HANDLER(SIOCGIWNICKN, orinoco_ioctl_getnick), + STD_IW_HANDLER(SIOCSIWRATE, orinoco_ioctl_setrate), + STD_IW_HANDLER(SIOCGIWRATE, orinoco_ioctl_getrate), + STD_IW_HANDLER(SIOCSIWRTS, orinoco_ioctl_setrts), + STD_IW_HANDLER(SIOCGIWRTS, orinoco_ioctl_getrts), + STD_IW_HANDLER(SIOCSIWFRAG, orinoco_ioctl_setfrag), + STD_IW_HANDLER(SIOCGIWFRAG, orinoco_ioctl_getfrag), + STD_IW_HANDLER(SIOCGIWRETRY, orinoco_ioctl_getretry), + STD_IW_HANDLER(SIOCSIWENCODE, orinoco_ioctl_setiwencode), + STD_IW_HANDLER(SIOCGIWENCODE, orinoco_ioctl_getiwencode), + STD_IW_HANDLER(SIOCSIWPOWER, orinoco_ioctl_setpower), + STD_IW_HANDLER(SIOCGIWPOWER, orinoco_ioctl_getpower), + STD_IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie), + STD_IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie), + STD_IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme), + STD_IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth), + STD_IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth), + STD_IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext), + STD_IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext), +}; + + +/* + Added typecasting since we no longer use iwreq_data -- Moustafa + */ +static const iw_handler orinoco_private_handler[] = { + [0] = (iw_handler) orinoco_ioctl_reset, + [1] = (iw_handler) orinoco_ioctl_reset, + [2] = (iw_handler) orinoco_ioctl_setport3, + [3] = (iw_handler) orinoco_ioctl_getport3, + [4] = (iw_handler) orinoco_ioctl_setpreamble, + [5] = (iw_handler) orinoco_ioctl_getpreamble, + [6] = (iw_handler) orinoco_ioctl_setibssport, + [7] = (iw_handler) orinoco_ioctl_getibssport, + [9] = (iw_handler) orinoco_ioctl_getrid, +}; + +static const struct iw_handler_def orinoco_handler_def = { + .num_standard = ARRAY_SIZE(orinoco_handler), + .num_private = ARRAY_SIZE(orinoco_private_handler), + .num_private_args = ARRAY_SIZE(orinoco_privtab), + .standard = orinoco_handler, + .private = orinoco_private_handler, + .private_args = orinoco_privtab, + .get_wireless_stats = orinoco_get_wireless_stats, +}; + +static void orinoco_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct orinoco_private *priv = netdev_priv(dev); + + strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1); + strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1); + strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1); + if (dev->dev.parent) + strncpy(info->bus_info, dev->dev.parent->bus_id, + sizeof(info->bus_info) - 1); + else + snprintf(info->bus_info, sizeof(info->bus_info) - 1, + "PCMCIA %p", priv->hw.iobase); +} + +static const struct ethtool_ops orinoco_ethtool_ops = { + .get_drvinfo = orinoco_get_drvinfo, + .get_link = ethtool_op_get_link, +}; + +/********************************************************************/ +/* Module initialization */ +/********************************************************************/ + +EXPORT_SYMBOL(alloc_orinocodev); +EXPORT_SYMBOL(free_orinocodev); + +EXPORT_SYMBOL(__orinoco_up); +EXPORT_SYMBOL(__orinoco_down); +EXPORT_SYMBOL(orinoco_reinit_firmware); + +EXPORT_SYMBOL(orinoco_interrupt); + +/* Can't be declared "const" or the whole __initdata section will + * become const */ +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (David Gibson , " + "Pavel Roskin , et al)"; + +static int __init init_orinoco(void) +{ + printk(KERN_DEBUG "%s\n", version); + return 0; +} + +static void __exit exit_orinoco(void) +{ +} + +module_init(init_orinoco); +module_exit(exit_orinoco); diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h new file mode 100644 index 000000000000..8c2953834923 --- /dev/null +++ b/drivers/net/wireless/orinoco/orinoco.h @@ -0,0 +1,218 @@ +/* orinoco.h + * + * Common definitions to all pieces of the various orinoco + * drivers + */ + +#ifndef _ORINOCO_H +#define _ORINOCO_H + +#define DRIVER_VERSION "0.15" + +#include +#include +#include +#include + +#include "hermes.h" + +/* To enable debug messages */ +//#define ORINOCO_DEBUG 3 + +#define WIRELESS_SPY // enable iwspy support + +#define MAX_SCAN_LEN 4096 + +#define ORINOCO_MAX_KEY_SIZE 14 +#define ORINOCO_MAX_KEYS 4 + +struct orinoco_key { + __le16 len; /* always stored as little-endian */ + char data[ORINOCO_MAX_KEY_SIZE]; +} __attribute__ ((packed)); + +#define TKIP_KEYLEN 16 +#define MIC_KEYLEN 8 + +struct orinoco_tkip_key { + u8 tkip[TKIP_KEYLEN]; + u8 tx_mic[MIC_KEYLEN]; + u8 rx_mic[MIC_KEYLEN]; +}; + +typedef enum { + FIRMWARE_TYPE_AGERE, + FIRMWARE_TYPE_INTERSIL, + FIRMWARE_TYPE_SYMBOL +} fwtype_t; + +struct bss_element { + union hermes_scan_info bss; + unsigned long last_scanned; + struct list_head list; +}; + +struct xbss_element { + struct agere_ext_scan_info bss; + unsigned long last_scanned; + struct list_head list; +}; + +struct hermes_rx_descriptor; + +struct orinoco_rx_data { + struct hermes_rx_descriptor *desc; + struct sk_buff *skb; + struct list_head list; +}; + +struct firmware; + +struct orinoco_private { + void *card; /* Pointer to card dependent structure */ + struct device *dev; + int (*hard_reset)(struct orinoco_private *); + int (*stop_fw)(struct orinoco_private *, int); + + /* Synchronisation stuff */ + spinlock_t lock; + int hw_unavailable; + struct work_struct reset_work; + + /* Interrupt tasklets */ + struct tasklet_struct rx_tasklet; + struct list_head rx_list; + struct orinoco_rx_data *rx_data; + + /* driver state */ + int open; + u16 last_linkstatus; + struct work_struct join_work; + struct work_struct wevent_work; + + /* Net device stuff */ + struct net_device *ndev; + struct net_device_stats stats; + struct iw_statistics wstats; + + /* Hardware control variables */ + hermes_t hw; + u16 txfid; + + /* Capabilities of the hardware/firmware */ + fwtype_t firmware_type; + char fw_name[32]; + int ibss_port; + int nicbuf_size; + u16 channel_mask; + + /* Boolean capabilities */ + unsigned int has_ibss:1; + unsigned int has_port3:1; + unsigned int has_wep:1; + unsigned int has_big_wep:1; + unsigned int has_mwo:1; + unsigned int has_pm:1; + unsigned int has_preamble:1; + unsigned int has_sensitivity:1; + unsigned int has_hostscan:1; + unsigned int has_alt_txcntl:1; + unsigned int has_ext_scan:1; + unsigned int has_wpa:1; + unsigned int do_fw_download:1; + unsigned int broken_disableport:1; + unsigned int broken_monitor:1; + + /* Configuration paramaters */ + u32 iw_mode; + int prefer_port3; + u16 encode_alg, wep_restrict, tx_key; + struct orinoco_key keys[ORINOCO_MAX_KEYS]; + int bitratemode; + char nick[IW_ESSID_MAX_SIZE+1]; + char desired_essid[IW_ESSID_MAX_SIZE+1]; + char desired_bssid[ETH_ALEN]; + int bssid_fixed; + u16 frag_thresh, mwo_robust; + u16 channel; + u16 ap_density, rts_thresh; + u16 pm_on, pm_mcast, pm_period, pm_timeout; + u16 preamble; +#ifdef WIRELESS_SPY + struct iw_spy_data spy_data; /* iwspy support */ + struct iw_public_data wireless_data; +#endif + + /* Configuration dependent variables */ + int port_type, createibss; + int promiscuous, mc_count; + + /* Scanning support */ + struct list_head bss_list; + struct list_head bss_free_list; + void *bss_xbss_data; + + int scan_inprogress; /* Scan pending... */ + u32 scan_mode; /* Type of scan done */ + + /* WPA support */ + u8 *wpa_ie; + int wpa_ie_len; + + struct orinoco_tkip_key tkip_key[ORINOCO_MAX_KEYS]; + struct crypto_hash *rx_tfm_mic; + struct crypto_hash *tx_tfm_mic; + + unsigned int wpa_enabled:1; + unsigned int tkip_cm_active:1; + unsigned int key_mgmt:3; + + /* Cached in memory firmware to use in ->resume */ + const struct firmware *cached_fw; +}; + +#ifdef ORINOCO_DEBUG +extern int orinoco_debug; +#define DEBUG(n, args...) do { if (orinoco_debug>(n)) printk(KERN_DEBUG args); } while(0) +#else +#define DEBUG(n, args...) do { } while (0) +#endif /* ORINOCO_DEBUG */ + +/********************************************************************/ +/* Exported prototypes */ +/********************************************************************/ + +extern struct net_device *alloc_orinocodev( + int sizeof_card, struct device *device, + int (*hard_reset)(struct orinoco_private *), + int (*stop_fw)(struct orinoco_private *, int)); +extern void free_orinocodev(struct net_device *dev); +extern int __orinoco_up(struct net_device *dev); +extern int __orinoco_down(struct net_device *dev); +extern int orinoco_reinit_firmware(struct net_device *dev); +extern irqreturn_t orinoco_interrupt(int irq, void * dev_id); + +/********************************************************************/ +/* Locking and synchronization functions */ +/********************************************************************/ + +static inline int orinoco_lock(struct orinoco_private *priv, + unsigned long *flags) +{ + spin_lock_irqsave(&priv->lock, *flags); + if (priv->hw_unavailable) { + DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n", + priv->ndev); + spin_unlock_irqrestore(&priv->lock, *flags); + return -EBUSY; + } + return 0; +} + +static inline void orinoco_unlock(struct orinoco_private *priv, + unsigned long *flags) +{ + spin_unlock_irqrestore(&priv->lock, *flags); +} + +#endif /* _ORINOCO_H */ diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c new file mode 100644 index 000000000000..6fcf2bda7cdf --- /dev/null +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -0,0 +1,533 @@ +/* orinoco_cs.c (formerly known as dldwd_cs.c) + * + * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such + * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ + * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others). + * It should also be usable on various Prism II based cards such as the + * Linksys, D-Link and Farallon Skyline. It should also work on Symbol + * cards such as the 3Com AirConnect and Ericsson WLAN. + * + * Copyright notice & release notes in file orinoco.c + */ + +#define DRIVER_NAME "orinoco_cs" +#define PFX DRIVER_NAME ": " + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "orinoco.h" + +/********************************************************************/ +/* Module stuff */ +/********************************************************************/ + +MODULE_AUTHOR("David Gibson "); +MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards"); +MODULE_LICENSE("Dual MPL/GPL"); + +/* Module parameters */ + +/* Some D-Link cards have buggy CIS. They do work at 5v properly, but + * don't have any CIS entry for it. This workaround it... */ +static int ignore_cis_vcc; /* = 0 */ +module_param(ignore_cis_vcc, int, 0); +MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket"); + +/********************************************************************/ +/* Data structures */ +/********************************************************************/ + +/* PCMCIA specific device information (goes in the card field of + * struct orinoco_private */ +struct orinoco_pccard { + struct pcmcia_device *p_dev; + dev_node_t node; + + /* Used to handle hard reset */ + /* yuck, we need this hack to work around the insanity of the + * PCMCIA layer */ + unsigned long hard_reset_in_progress; +}; + + +/********************************************************************/ +/* Function prototypes */ +/********************************************************************/ + +static int orinoco_cs_config(struct pcmcia_device *link); +static void orinoco_cs_release(struct pcmcia_device *link); +static void orinoco_cs_detach(struct pcmcia_device *p_dev); + +/********************************************************************/ +/* Device methods */ +/********************************************************************/ + +static int +orinoco_cs_hard_reset(struct orinoco_private *priv) +{ + struct orinoco_pccard *card = priv->card; + struct pcmcia_device *link = card->p_dev; + int err; + + /* We need atomic ops here, because we're not holding the lock */ + set_bit(0, &card->hard_reset_in_progress); + + err = pcmcia_reset_card(link->socket); + if (err) + return err; + + msleep(100); + clear_bit(0, &card->hard_reset_in_progress); + + return 0; +} + +/********************************************************************/ +/* PCMCIA stuff */ +/********************************************************************/ + +/* + * This creates an "instance" of the driver, allocating local data + * structures for one device. The device is registered with Card + * Services. + * + * The dev_link structure is initialized, but we don't actually + * configure the card at this point -- we wait until we receive a card + * insertion event. */ +static int +orinoco_cs_probe(struct pcmcia_device *link) +{ + struct net_device *dev; + struct orinoco_private *priv; + struct orinoco_pccard *card; + + dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), + orinoco_cs_hard_reset, NULL); + if (! dev) + return -ENOMEM; + priv = netdev_priv(dev); + card = priv->card; + + /* Link both structures together */ + card->p_dev = link; + link->priv = dev; + + /* Interrupt setup */ + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Handler = orinoco_interrupt; + link->irq.Instance = dev; + + /* General socket configuration defaults can go here. In this + * client, we assume very little, and rely on the CIS for + * almost everything. In most clients, many details (i.e., + * number, sizes, and attributes of IO windows) are fixed by + * the nature of the device, and can be hard-wired here. */ + link->conf.Attributes = 0; + link->conf.IntType = INT_MEMORY_AND_IO; + + return orinoco_cs_config(link); +} /* orinoco_cs_attach */ + +/* + * This deletes a driver "instance". The device is de-registered with + * Card Services. If it has been released, all local data structures + * are freed. Otherwise, the structures will be freed when the device + * is released. + */ +static void orinoco_cs_detach(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->dev_node) + unregister_netdev(dev); + + orinoco_cs_release(link); + + free_orinocodev(dev); +} /* orinoco_cs_detach */ + +/* + * orinoco_cs_config() is scheduled to run after a CARD_INSERTION + * event is received, to configure the PCMCIA socket, and to make the + * device available to the system. + */ + +#define CS_CHECK(fn, ret) do { \ + last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \ + } while (0) + +static int orinoco_cs_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + goto next_entry; + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + /* Do we need to allocate an interrupt? */ + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + goto next_entry; + } + return 0; + +next_entry: + pcmcia_disable_device(p_dev); + return -ENODEV; +}; + +static int +orinoco_cs_config(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_pccard *card = priv->card; + hermes_t *hw = &priv->hw; + int last_fn, last_ret; + void __iomem *mem; + + /* + * In this loop, we scan the CIS for configuration table + * entries, each of which describes a valid card + * configuration, including voltage, IO window, memory window, + * and interrupt settings. + * + * We make no assumptions about the card to be configured: we + * use just the information available in the CIS. In an ideal + * world, this would work for any PCMCIA card, but it requires + * a complete and accurate CIS. In practice, a driver usually + * "knows" most of these things without consulting the CIS, + * and most client drivers will only use the CIS to fill in + * implementation-defined details. + */ + last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); + if (last_ret) { + if (!ignore_cis_vcc) + printk(KERN_ERR PFX "GetNextTuple(): No matching " + "CIS configuration. Maybe you need the " + "ignore_cis_vcc=1 parameter.\n"); + cs_error(link, RequestIO, last_ret); + goto failed; + } + + /* + * Allocate an interrupt line. Note that this does not assign + * a handler to the interrupt, unless the 'Handler' member of + * the irq structure is initialized. + */ + CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + + /* We initialize the hermes structure before completing PCMCIA + * configuration just in case the interrupt handler gets + * called. */ + mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); + if (!mem) + goto cs_failed; + + hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); + + /* + * This actually configures the PCMCIA socket -- setting up + * the I/O windows and the interrupt mapping, and putting the + * card and host interface into "Memory and IO" mode. + */ + CS_CHECK(RequestConfiguration, + pcmcia_request_configuration(link, &link->conf)); + + /* Ok, we have the configuration, prepare to register the netdev */ + dev->base_addr = link->io.BasePort1; + dev->irq = link->irq.AssignedIRQ; + card->node.major = card->node.minor = 0; + + SET_NETDEV_DEV(dev, &handle_to_dev(link)); + /* Tell the stack we exist */ + if (register_netdev(dev) != 0) { + printk(KERN_ERR PFX "register_netdev() failed\n"); + goto failed; + } + + /* At this point, the dev_node_t structure(s) needs to be + * initialized and arranged in a linked list at link->dev_node. */ + strcpy(card->node.dev_name, dev->name); + link->dev_node = &card->node; /* link->dev_node being non-NULL is also + used to indicate that the + net_device has been registered */ + + /* Finally, report what we've done */ + printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io " + "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id, + link->irq.AssignedIRQ, link->io.BasePort1, + link->io.BasePort1 + link->io.NumPorts1 - 1); + return 0; + + cs_failed: + cs_error(link, last_fn, last_ret); + + failed: + orinoco_cs_release(link); + return -ENODEV; +} /* orinoco_cs_config */ + +/* + * After a card is removed, orinoco_cs_release() will unregister the + * device, and release the PCMCIA configuration. If the device is + * still open, this will be postponed until it is closed. + */ +static void +orinoco_cs_release(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + + /* We're committed to taking the device away now, so mark the + * hardware as unavailable */ + spin_lock_irqsave(&priv->lock, flags); + priv->hw_unavailable++; + spin_unlock_irqrestore(&priv->lock, flags); + + pcmcia_disable_device(link); + if (priv->hw.iobase) + ioport_unmap(priv->hw.iobase); +} /* orinoco_cs_release */ + +static int orinoco_cs_suspend(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_pccard *card = priv->card; + int err = 0; + unsigned long flags; + + /* This is probably racy, but I can't think of + a better way, short of rewriting the PCMCIA + layer to not suck :-( */ + if (! test_bit(0, &card->hard_reset_in_progress)) { + spin_lock_irqsave(&priv->lock, flags); + + err = __orinoco_down(dev); + if (err) + printk(KERN_WARNING "%s: Error %d downing interface\n", + dev->name, err); + + netif_device_detach(dev); + priv->hw_unavailable++; + + spin_unlock_irqrestore(&priv->lock, flags); + } + + return 0; +} + +static int orinoco_cs_resume(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_pccard *card = priv->card; + int err = 0; + unsigned long flags; + + if (! test_bit(0, &card->hard_reset_in_progress)) { + err = orinoco_reinit_firmware(dev); + if (err) { + printk(KERN_ERR "%s: Error %d re-initializing firmware\n", + dev->name, err); + return -EIO; + } + + spin_lock_irqsave(&priv->lock, flags); + + netif_device_attach(dev); + priv->hw_unavailable--; + + if (priv->open && ! priv->hw_unavailable) { + err = __orinoco_up(dev); + if (err) + printk(KERN_ERR "%s: Error %d restarting card\n", + dev->name, err); + } + + spin_unlock_irqrestore(&priv->lock, flags); + } + + return err; +} + + +/********************************************************************/ +/* Module initialization */ +/********************************************************************/ + +/* Can't be declared "const" or the whole __initdata section will + * become const */ +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (David Gibson , " + "Pavel Roskin , et al)"; + +static struct pcmcia_device_id orinoco_cs_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */ + PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */ + PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */ + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ + PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */ + PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */ + PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */ + PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */ + PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */ + PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */ + PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */ + PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */ + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */ + PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */ + PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */ + PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */ + PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */ + PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */ + PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */ + PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */ + PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */ + PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */ + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */ + PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */ + PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9), + PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), + PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5), + PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2), + PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092), + PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f), + PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842), + PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e), + PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169), + PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb), + PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3), + PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18), + PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90), + PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b), + PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39), + PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584), + PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9), + PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae), + PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac), + PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab), + PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916), + PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146), + PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3), + PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c), + PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), + PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077), + PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18), + PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77), + PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf), + PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2), + PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92), + PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395), + PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a), + PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410), + PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3), + PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01), + PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a), + PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1), + PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1), + PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767), + PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6), + PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed), + PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39), + PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264), + PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178), + PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9), + PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26), + PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b), + PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757), + PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a), + PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e), + PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39), + PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); + +static struct pcmcia_driver orinoco_driver = { + .owner = THIS_MODULE, + .drv = { + .name = DRIVER_NAME, + }, + .probe = orinoco_cs_probe, + .remove = orinoco_cs_detach, + .id_table = orinoco_cs_ids, + .suspend = orinoco_cs_suspend, + .resume = orinoco_cs_resume, +}; + +static int __init +init_orinoco_cs(void) +{ + printk(KERN_DEBUG "%s\n", version); + + return pcmcia_register_driver(&orinoco_driver); +} + +static void __exit +exit_orinoco_cs(void) +{ + pcmcia_unregister_driver(&orinoco_driver); +} + +module_init(init_orinoco_cs); +module_exit(exit_orinoco_cs); diff --git a/drivers/net/wireless/orinoco/orinoco_nortel.c b/drivers/net/wireless/orinoco/orinoco_nortel.c new file mode 100644 index 000000000000..2fc86596302e --- /dev/null +++ b/drivers/net/wireless/orinoco/orinoco_nortel.c @@ -0,0 +1,324 @@ +/* orinoco_nortel.c + * + * Driver for Prism II devices which would usually be driven by orinoco_cs, + * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in + * Nortel emobility, Symbol LA-4113 and Symbol LA-4123. + * + * Copyright (C) 2002 Tobias Hoffmann + * (C) 2003 Christoph Jungegger + * + * Some of this code is borrowed from orinoco_plx.c + * Copyright (C) 2001 Daniel Barlow + * Some of this code is borrowed from orinoco_pci.c + * Copyright (C) 2001 Jean Tourrilhes + * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing + * has been copied from it. linux-wlan-ng-0.1.10 is originally : + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#define DRIVER_NAME "orinoco_nortel" +#define PFX DRIVER_NAME ": " + +#include +#include +#include +#include +#include +#include + +#include "orinoco.h" +#include "orinoco_pci.h" + +#define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */ +#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ + + +/* + * Do a soft reset of the card using the Configuration Option Register + * We need this to get going... + * This is the part of the code that is strongly inspired from wlan-ng + * + * Note bis : Don't try to access HERMES_CMD during the reset phase. + * It just won't work ! + */ +static int orinoco_nortel_cor_reset(struct orinoco_private *priv) +{ + struct orinoco_pci_card *card = priv->card; + + /* Assert the reset until the card notices */ + iowrite16(8, card->bridge_io + 2); + ioread16(card->attr_io + COR_OFFSET); + iowrite16(0x80, card->attr_io + COR_OFFSET); + mdelay(1); + + /* Give time for the card to recover from this hard effort */ + iowrite16(0, card->attr_io + COR_OFFSET); + iowrite16(0, card->attr_io + COR_OFFSET); + mdelay(1); + + /* Set COR as usual */ + iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); + iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); + mdelay(1); + + iowrite16(0x228, card->bridge_io + 2); + + return 0; +} + +static int orinoco_nortel_hw_init(struct orinoco_pci_card *card) +{ + int i; + u32 reg; + + /* Setup bridge */ + if (ioread16(card->bridge_io) & 1) { + printk(KERN_ERR PFX "brg1 answer1 wrong\n"); + return -EBUSY; + } + iowrite16(0x118, card->bridge_io + 2); + iowrite16(0x108, card->bridge_io + 2); + mdelay(30); + iowrite16(0x8, card->bridge_io + 2); + for (i = 0; i < 30; i++) { + mdelay(30); + if (ioread16(card->bridge_io) & 0x10) { + break; + } + } + if (i == 30) { + printk(KERN_ERR PFX "brg1 timed out\n"); + return -EBUSY; + } + if (ioread16(card->attr_io + COR_OFFSET) & 1) { + printk(KERN_ERR PFX "brg2 answer1 wrong\n"); + return -EBUSY; + } + if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) { + printk(KERN_ERR PFX "brg2 answer2 wrong\n"); + return -EBUSY; + } + if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) { + printk(KERN_ERR PFX "brg2 answer3 wrong\n"); + return -EBUSY; + } + + /* Set the PCMCIA COR register */ + iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); + mdelay(1); + reg = ioread16(card->attr_io + COR_OFFSET); + if (reg != COR_VALUE) { + printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n", + reg); + return -EBUSY; + } + + /* Set LEDs */ + iowrite16(1, card->bridge_io + 10); + return 0; +} + +static int orinoco_nortel_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err; + struct orinoco_private *priv; + struct orinoco_pci_card *card; + struct net_device *dev; + void __iomem *hermes_io, *bridge_io, *attr_io; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, DRIVER_NAME); + if (err) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; + } + + bridge_io = pci_iomap(pdev, 0, 0); + if (!bridge_io) { + printk(KERN_ERR PFX "Cannot map bridge registers\n"); + err = -EIO; + goto fail_map_bridge; + } + + attr_io = pci_iomap(pdev, 1, 0); + if (!attr_io) { + printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); + err = -EIO; + goto fail_map_attr; + } + + hermes_io = pci_iomap(pdev, 2, 0); + if (!hermes_io) { + printk(KERN_ERR PFX "Cannot map chipset registers\n"); + err = -EIO; + goto fail_map_hermes; + } + + /* Allocate network device */ + dev = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_nortel_cor_reset, NULL); + if (!dev) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + err = -ENOMEM; + goto fail_alloc; + } + + priv = netdev_priv(dev); + card = priv->card; + card->bridge_io = bridge_io; + card->attr_io = attr_io; + SET_NETDEV_DEV(dev, &pdev->dev); + + hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); + + err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, + dev->name, dev); + if (err) { + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); + err = -EBUSY; + goto fail_irq; + } + + err = orinoco_nortel_hw_init(card); + if (err) { + printk(KERN_ERR PFX "Hardware initialization failed\n"); + goto fail; + } + + err = orinoco_nortel_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + + err = register_netdev(dev); + if (err) { + printk(KERN_ERR PFX "Cannot register network device\n"); + goto fail; + } + + pci_set_drvdata(pdev, dev); + printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name, + pci_name(pdev)); + + return 0; + + fail: + free_irq(pdev->irq, dev); + + fail_irq: + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + + fail_alloc: + pci_iounmap(pdev, hermes_io); + + fail_map_hermes: + pci_iounmap(pdev, attr_io); + + fail_map_attr: + pci_iounmap(pdev, bridge_io); + + fail_map_bridge: + pci_release_regions(pdev); + + fail_resources: + pci_disable_device(pdev); + + return err; +} + +static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_pci_card *card = priv->card; + + /* Clear LEDs */ + iowrite16(0, card->bridge_io + 10); + + unregister_netdev(dev); + free_irq(pdev->irq, dev); + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + pci_iounmap(pdev, priv->hw.iobase); + pci_iounmap(pdev, card->attr_io); + pci_iounmap(pdev, card->bridge_io); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_device_id orinoco_nortel_id_table[] = { + /* Nortel emobility PCI */ + {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,}, + /* Symbol LA-4123 PCI */ + {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,}, + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table); + +static struct pci_driver orinoco_nortel_driver = { + .name = DRIVER_NAME, + .id_table = orinoco_nortel_id_table, + .probe = orinoco_nortel_init_one, + .remove = __devexit_p(orinoco_nortel_remove_one), + .suspend = orinoco_pci_suspend, + .resume = orinoco_pci_resume, +}; + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Tobias Hoffmann & Christoph Jungegger )"; +MODULE_AUTHOR("Christoph Jungegger "); +MODULE_DESCRIPTION + ("Driver for wireless LAN cards using the Nortel PCI bridge"); +MODULE_LICENSE("Dual MPL/GPL"); + +static int __init orinoco_nortel_init(void) +{ + printk(KERN_DEBUG "%s\n", version); + return pci_register_driver(&orinoco_nortel_driver); +} + +static void __exit orinoco_nortel_exit(void) +{ + pci_unregister_driver(&orinoco_nortel_driver); +} + +module_init(orinoco_nortel_init); +module_exit(orinoco_nortel_exit); + +/* + * Local variables: + * c-indent-level: 8 + * c-basic-offset: 8 + * tab-width: 8 + * End: + */ diff --git a/drivers/net/wireless/orinoco/orinoco_pci.c b/drivers/net/wireless/orinoco/orinoco_pci.c new file mode 100644 index 000000000000..4ebd638a073e --- /dev/null +++ b/drivers/net/wireless/orinoco/orinoco_pci.c @@ -0,0 +1,264 @@ +/* orinoco_pci.c + * + * Driver for Prism 2.5/3 devices that have a direct PCI interface + * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge). + * The card contains only one PCI region, which contains all the usual + * hermes registers, as well as the COR register. + * + * Current maintainers are: + * Pavel Roskin + * and David Gibson + * + * Some of this code is borrowed from orinoco_plx.c + * Copyright (C) 2001 Daniel Barlow + * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing + * has been copied from it. linux-wlan-ng-0.1.10 is originally : + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * This file originally written by: + * Copyright (C) 2001 Jean Tourrilhes + * And is now maintained by: + * (C) Copyright David Gibson, IBM Corp. 2002-2003. + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#define DRIVER_NAME "orinoco_pci" +#define PFX DRIVER_NAME ": " + +#include +#include +#include +#include +#include + +#include "orinoco.h" +#include "orinoco_pci.h" + +/* Offset of the COR register of the PCI card */ +#define HERMES_PCI_COR (0x26) + +/* Bitmask to reset the card */ +#define HERMES_PCI_COR_MASK (0x0080) + +/* Magic timeouts for doing the reset. + * Those times are straight from wlan-ng, and it is claimed that they + * are necessary. Alan will kill me. Take your time and grab a coffee. */ +#define HERMES_PCI_COR_ONT (250) /* ms */ +#define HERMES_PCI_COR_OFFT (500) /* ms */ +#define HERMES_PCI_COR_BUSYT (500) /* ms */ + +/* + * Do a soft reset of the card using the Configuration Option Register + * We need this to get going... + * This is the part of the code that is strongly inspired from wlan-ng + * + * Note : This code is done with irq enabled. This mean that many + * interrupts will occur while we are there. This is why we use the + * jiffies to regulate time instead of a straight mdelay(). Usually we + * need only around 245 iteration of the loop to do 250 ms delay. + * + * Note bis : Don't try to access HERMES_CMD during the reset phase. + * It just won't work ! + */ +static int orinoco_pci_cor_reset(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + unsigned long timeout; + u16 reg; + + /* Assert the reset until the card notices */ + hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK); + mdelay(HERMES_PCI_COR_ONT); + + /* Give time for the card to recover from this hard effort */ + hermes_write_regn(hw, PCI_COR, 0x0000); + mdelay(HERMES_PCI_COR_OFFT); + + /* The card is ready when it's no longer busy */ + timeout = jiffies + (HERMES_PCI_COR_BUSYT * HZ / 1000); + reg = hermes_read_regn(hw, CMD); + while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { + mdelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* Still busy? */ + if (reg & HERMES_CMD_BUSY) { + printk(KERN_ERR PFX "Busy timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int orinoco_pci_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err; + struct orinoco_private *priv; + struct orinoco_pci_card *card; + struct net_device *dev; + void __iomem *hermes_io; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, DRIVER_NAME); + if (err) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; + } + + hermes_io = pci_iomap(pdev, 0, 0); + if (!hermes_io) { + printk(KERN_ERR PFX "Cannot remap chipset registers\n"); + err = -EIO; + goto fail_map_hermes; + } + + /* Allocate network device */ + dev = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_pci_cor_reset, NULL); + if (!dev) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + err = -ENOMEM; + goto fail_alloc; + } + + priv = netdev_priv(dev); + card = priv->card; + SET_NETDEV_DEV(dev, &pdev->dev); + + hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING); + + err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, + dev->name, dev); + if (err) { + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); + err = -EBUSY; + goto fail_irq; + } + + err = orinoco_pci_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + + err = register_netdev(dev); + if (err) { + printk(KERN_ERR PFX "Cannot register network device\n"); + goto fail; + } + + pci_set_drvdata(pdev, dev); + printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name, + pci_name(pdev)); + + return 0; + + fail: + free_irq(pdev->irq, dev); + + fail_irq: + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + + fail_alloc: + pci_iounmap(pdev, hermes_io); + + fail_map_hermes: + pci_release_regions(pdev); + + fail_resources: + pci_disable_device(pdev); + + return err; +} + +static void __devexit orinoco_pci_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct orinoco_private *priv = netdev_priv(dev); + + unregister_netdev(dev); + free_irq(pdev->irq, dev); + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + pci_iounmap(pdev, priv->hw.iobase); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_device_id orinoco_pci_id_table[] = { + /* Intersil Prism 3 */ + {0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,}, + /* Intersil Prism 2.5 */ + {0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,}, + /* Samsung MagicLAN SWL-2210P */ + {0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,}, + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table); + +static struct pci_driver orinoco_pci_driver = { + .name = DRIVER_NAME, + .id_table = orinoco_pci_id_table, + .probe = orinoco_pci_init_one, + .remove = __devexit_p(orinoco_pci_remove_one), + .suspend = orinoco_pci_suspend, + .resume = orinoco_pci_resume, +}; + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Pavel Roskin ," + " David Gibson &" + " Jean Tourrilhes )"; +MODULE_AUTHOR("Pavel Roskin & David Gibson "); +MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface"); +MODULE_LICENSE("Dual MPL/GPL"); + +static int __init orinoco_pci_init(void) +{ + printk(KERN_DEBUG "%s\n", version); + return pci_register_driver(&orinoco_pci_driver); +} + +static void __exit orinoco_pci_exit(void) +{ + pci_unregister_driver(&orinoco_pci_driver); +} + +module_init(orinoco_pci_init); +module_exit(orinoco_pci_exit); + +/* + * Local variables: + * c-indent-level: 8 + * c-basic-offset: 8 + * tab-width: 8 + * End: + */ diff --git a/drivers/net/wireless/orinoco/orinoco_pci.h b/drivers/net/wireless/orinoco/orinoco_pci.h new file mode 100644 index 000000000000..f4e5e06760c1 --- /dev/null +++ b/drivers/net/wireless/orinoco/orinoco_pci.h @@ -0,0 +1,109 @@ +/* orinoco_pci.h + * + * Common code for all Orinoco drivers for PCI devices, including + * both native PCI and PCMCIA-to-PCI bridges. + * + * Copyright (C) 2005, Pavel Roskin. + * See orinoco.c for license. + */ + +#ifndef _ORINOCO_PCI_H +#define _ORINOCO_PCI_H + +#include + +/* Driver specific data */ +struct orinoco_pci_card { + void __iomem *bridge_io; + void __iomem *attr_io; +}; + +#ifdef CONFIG_PM +static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err; + + err = orinoco_lock(priv, &flags); + if (err) { + printk(KERN_ERR "%s: cannot lock hardware for suspend\n", + dev->name); + return err; + } + + err = __orinoco_down(dev); + if (err) + printk(KERN_WARNING "%s: error %d bringing interface down " + "for suspend\n", dev->name, err); + + netif_device_detach(dev); + + priv->hw_unavailable++; + + orinoco_unlock(priv, &flags); + + free_irq(pdev->irq, dev); + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int orinoco_pci_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err; + + pci_set_power_state(pdev, 0); + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s: pci_enable_device failed on resume\n", + dev->name); + return err; + } + pci_restore_state(pdev); + + err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, + dev->name, dev); + if (err) { + printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n", + dev->name); + pci_disable_device(pdev); + return -EBUSY; + } + + err = orinoco_reinit_firmware(dev); + if (err) { + printk(KERN_ERR "%s: error %d re-initializing firmware " + "on resume\n", dev->name, err); + return err; + } + + spin_lock_irqsave(&priv->lock, flags); + + netif_device_attach(dev); + + priv->hw_unavailable--; + + if (priv->open && (! priv->hw_unavailable)) { + err = __orinoco_up(dev); + if (err) + printk(KERN_ERR "%s: Error %d restarting card on resume\n", + dev->name, err); + } + + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} +#else +#define orinoco_pci_suspend NULL +#define orinoco_pci_resume NULL +#endif + +#endif /* _ORINOCO_PCI_H */ diff --git a/drivers/net/wireless/orinoco/orinoco_plx.c b/drivers/net/wireless/orinoco/orinoco_plx.c new file mode 100644 index 000000000000..ef761857bb38 --- /dev/null +++ b/drivers/net/wireless/orinoco/orinoco_plx.c @@ -0,0 +1,371 @@ +/* orinoco_plx.c + * + * Driver for Prism II devices which would usually be driven by orinoco_cs, + * but are connected to the PCI bus by a PLX9052. + * + * Current maintainers are: + * Pavel Roskin + * and David Gibson + * + * (C) Copyright David Gibson, IBM Corp. 2001-2003. + * Copyright (C) 2001 Daniel Barlow + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + * + * Here's the general details on how the PLX9052 adapter works: + * + * - Two PCI I/O address spaces, one 0x80 long which contains the + * PLX9052 registers, and one that's 0x40 long mapped to the PCMCIA + * slot I/O address space. + * + * - One PCI memory address space, mapped to the PCMCIA attribute space + * (containing the CIS). + * + * Using the later, you can read through the CIS data to make sure the + * card is compatible with the driver. Keep in mind that the PCMCIA + * spec specifies the CIS as the lower 8 bits of each word read from + * the CIS, so to read the bytes of the CIS, read every other byte + * (0,2,4,...). Passing that test, you need to enable the I/O address + * space on the PCMCIA card via the PCMCIA COR register. This is the + * first byte following the CIS. In my case (which may not have any + * relation to what's on the PRISM2 cards), COR was at offset 0x800 + * within the PCI memory space. Write 0x41 to the COR register to + * enable I/O mode and to select level triggered interrupts. To + * confirm you actually succeeded, read the COR register back and make + * sure it actually got set to 0x41, in case you have an unexpected + * card inserted. + * + * Following that, you can treat the second PCI I/O address space (the + * one that's not 0x80 in length) as the PCMCIA I/O space. + * + * Note that in the Eumitcom's source for their drivers, they register + * the interrupt as edge triggered when registering it with the + * Windows kernel. I don't recall how to register edge triggered on + * Linux (if it can be done at all). But in some experimentation, I + * don't see much operational difference between using either + * interrupt mode. Don't mess with the interrupt mode in the COR + * register though, as the PLX9052 wants level triggers with the way + * the serial EEPROM configures it on the WL11000. + * + * There's some other little quirks related to timing that I bumped + * into, but I don't recall right now. Also, there's two variants of + * the WL11000 I've seen, revision A1 and T2. These seem to differ + * slightly in the timings configured in the wait-state generator in + * the PLX9052. There have also been some comments from Eumitcom that + * cards shouldn't be hot swapped, apparently due to risk of cooking + * the PLX9052. I'm unsure why they believe this, as I can't see + * anything in the design that would really cause a problem, except + * for crashing drivers not written to expect it. And having developed + * drivers for the WL11000, I'd say it's quite tricky to write code + * that will successfully deal with a hot unplug. Very odd things + * happen on the I/O side of things. But anyway, be warned. Despite + * that, I've hot-swapped a number of times during debugging and + * driver development for various reasons (stuck WAIT# line after the + * radio card's firmware locks up). + */ + +#define DRIVER_NAME "orinoco_plx" +#define PFX DRIVER_NAME ": " + +#include +#include +#include +#include +#include +#include + +#include "orinoco.h" +#include "orinoco_pci.h" + +#define COR_OFFSET (0x3e0) /* COR attribute offset of Prism2 PC card */ +#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ +#define COR_RESET (0x80) /* reset bit in the COR register */ +#define PLX_RESET_TIME (500) /* milliseconds */ + +#define PLX_INTCSR 0x4c /* Interrupt Control & Status Register */ +#define PLX_INTCSR_INTEN (1<<6) /* Interrupt Enable bit */ + +/* + * Do a soft reset of the card using the Configuration Option Register + */ +static int orinoco_plx_cor_reset(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + struct orinoco_pci_card *card = priv->card; + unsigned long timeout; + u16 reg; + + iowrite8(COR_VALUE | COR_RESET, card->attr_io + COR_OFFSET); + mdelay(1); + + iowrite8(COR_VALUE, card->attr_io + COR_OFFSET); + mdelay(1); + + /* Just in case, wait more until the card is no longer busy */ + timeout = jiffies + (PLX_RESET_TIME * HZ / 1000); + reg = hermes_read_regn(hw, CMD); + while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { + mdelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* Still busy? */ + if (reg & HERMES_CMD_BUSY) { + printk(KERN_ERR PFX "Busy timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int orinoco_plx_hw_init(struct orinoco_pci_card *card) +{ + int i; + u32 csr_reg; + static const u8 cis_magic[] = { + 0x01, 0x03, 0x00, 0x00, 0xff, 0x17, 0x04, 0x67 + }; + + printk(KERN_DEBUG PFX "CIS: "); + for (i = 0; i < 16; i++) { + printk("%02X:", ioread8(card->attr_io + (i << 1))); + } + printk("\n"); + + /* Verify whether a supported PC card is present */ + /* FIXME: we probably need to be smarted about this */ + for (i = 0; i < sizeof(cis_magic); i++) { + if (cis_magic[i] != ioread8(card->attr_io + (i << 1))) { + printk(KERN_ERR PFX "The CIS value of Prism2 PC " + "card is unexpected\n"); + return -ENODEV; + } + } + + /* bjoern: We need to tell the card to enable interrupts, in + case the serial eprom didn't do this already. See the + PLX9052 data book, p8-1 and 8-24 for reference. */ + csr_reg = ioread32(card->bridge_io + PLX_INTCSR); + if (!(csr_reg & PLX_INTCSR_INTEN)) { + csr_reg |= PLX_INTCSR_INTEN; + iowrite32(csr_reg, card->bridge_io + PLX_INTCSR); + csr_reg = ioread32(card->bridge_io + PLX_INTCSR); + if (!(csr_reg & PLX_INTCSR_INTEN)) { + printk(KERN_ERR PFX "Cannot enable interrupts\n"); + return -EIO; + } + } + + return 0; +} + +static int orinoco_plx_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err; + struct orinoco_private *priv; + struct orinoco_pci_card *card; + struct net_device *dev; + void __iomem *hermes_io, *attr_io, *bridge_io; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, DRIVER_NAME); + if (err) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; + } + + bridge_io = pci_iomap(pdev, 1, 0); + if (!bridge_io) { + printk(KERN_ERR PFX "Cannot map bridge registers\n"); + err = -EIO; + goto fail_map_bridge; + } + + attr_io = pci_iomap(pdev, 2, 0); + if (!attr_io) { + printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); + err = -EIO; + goto fail_map_attr; + } + + hermes_io = pci_iomap(pdev, 3, 0); + if (!hermes_io) { + printk(KERN_ERR PFX "Cannot map chipset registers\n"); + err = -EIO; + goto fail_map_hermes; + } + + /* Allocate network device */ + dev = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_plx_cor_reset, NULL); + if (!dev) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + err = -ENOMEM; + goto fail_alloc; + } + + priv = netdev_priv(dev); + card = priv->card; + card->bridge_io = bridge_io; + card->attr_io = attr_io; + SET_NETDEV_DEV(dev, &pdev->dev); + + hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); + + err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, + dev->name, dev); + if (err) { + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); + err = -EBUSY; + goto fail_irq; + } + + err = orinoco_plx_hw_init(card); + if (err) { + printk(KERN_ERR PFX "Hardware initialization failed\n"); + goto fail; + } + + err = orinoco_plx_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + + err = register_netdev(dev); + if (err) { + printk(KERN_ERR PFX "Cannot register network device\n"); + goto fail; + } + + pci_set_drvdata(pdev, dev); + printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name, + pci_name(pdev)); + + return 0; + + fail: + free_irq(pdev->irq, dev); + + fail_irq: + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + + fail_alloc: + pci_iounmap(pdev, hermes_io); + + fail_map_hermes: + pci_iounmap(pdev, attr_io); + + fail_map_attr: + pci_iounmap(pdev, bridge_io); + + fail_map_bridge: + pci_release_regions(pdev); + + fail_resources: + pci_disable_device(pdev); + + return err; +} + +static void __devexit orinoco_plx_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_pci_card *card = priv->card; + + unregister_netdev(dev); + free_irq(pdev->irq, dev); + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + pci_iounmap(pdev, priv->hw.iobase); + pci_iounmap(pdev, card->attr_io); + pci_iounmap(pdev, card->bridge_io); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_device_id orinoco_plx_id_table[] = { + {0x111a, 0x1023, PCI_ANY_ID, PCI_ANY_ID,}, /* Siemens SpeedStream SS1023 */ + {0x1385, 0x4100, PCI_ANY_ID, PCI_ANY_ID,}, /* Netgear MA301 */ + {0x15e8, 0x0130, PCI_ANY_ID, PCI_ANY_ID,}, /* Correga - does this work? */ + {0x1638, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* SMC EZConnect SMC2602W, + Eumitcom PCI WL11000, + Addtron AWA-100 */ + {0x16ab, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* Global Sun Tech GL24110P */ + {0x16ab, 0x1101, PCI_ANY_ID, PCI_ANY_ID,}, /* Reported working, but unknown */ + {0x16ab, 0x1102, PCI_ANY_ID, PCI_ANY_ID,}, /* Linksys WDT11 */ + {0x16ec, 0x3685, PCI_ANY_ID, PCI_ANY_ID,}, /* USR 2415 */ + {0xec80, 0xec00, PCI_ANY_ID, PCI_ANY_ID,}, /* Belkin F5D6000 tested by + Brendan W. McAdams */ + {0x10b7, 0x7770, PCI_ANY_ID, PCI_ANY_ID,}, /* 3Com AirConnect PCI tested by + Damien Persohn */ + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, orinoco_plx_id_table); + +static struct pci_driver orinoco_plx_driver = { + .name = DRIVER_NAME, + .id_table = orinoco_plx_id_table, + .probe = orinoco_plx_init_one, + .remove = __devexit_p(orinoco_plx_remove_one), + .suspend = orinoco_pci_suspend, + .resume = orinoco_pci_resume, +}; + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Pavel Roskin ," + " David Gibson ," + " Daniel Barlow )"; +MODULE_AUTHOR("Daniel Barlow "); +MODULE_DESCRIPTION("Driver for wireless LAN cards using the PLX9052 PCI bridge"); +MODULE_LICENSE("Dual MPL/GPL"); + +static int __init orinoco_plx_init(void) +{ + printk(KERN_DEBUG "%s\n", version); + return pci_register_driver(&orinoco_plx_driver); +} + +static void __exit orinoco_plx_exit(void) +{ + pci_unregister_driver(&orinoco_plx_driver); +} + +module_init(orinoco_plx_init); +module_exit(orinoco_plx_exit); + +/* + * Local variables: + * c-indent-level: 8 + * c-basic-offset: 8 + * tab-width: 8 + * End: + */ diff --git a/drivers/net/wireless/orinoco/orinoco_tmd.c b/drivers/net/wireless/orinoco/orinoco_tmd.c new file mode 100644 index 000000000000..ede24ec309c0 --- /dev/null +++ b/drivers/net/wireless/orinoco/orinoco_tmd.c @@ -0,0 +1,248 @@ +/* orinoco_tmd.c + * + * Driver for Prism II devices which would usually be driven by orinoco_cs, + * but are connected to the PCI bus by a TMD7160. + * + * Copyright (C) 2003 Joerg Dorchain + * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + * + * The actual driving is done by orinoco.c, this is just resource + * allocation stuff. + * + * This driver is modeled after the orinoco_plx driver. The main + * difference is that the TMD chip has only IO port ranges and doesn't + * provide access to the PCMCIA attribute space. + * + * Pheecom sells cards with the TMD chip as "ASIC version" + */ + +#define DRIVER_NAME "orinoco_tmd" +#define PFX DRIVER_NAME ": " + +#include +#include +#include +#include +#include +#include + +#include "orinoco.h" +#include "orinoco_pci.h" + +#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ +#define COR_RESET (0x80) /* reset bit in the COR register */ +#define TMD_RESET_TIME (500) /* milliseconds */ + +/* + * Do a soft reset of the card using the Configuration Option Register + */ +static int orinoco_tmd_cor_reset(struct orinoco_private *priv) +{ + hermes_t *hw = &priv->hw; + struct orinoco_pci_card *card = priv->card; + unsigned long timeout; + u16 reg; + + iowrite8(COR_VALUE | COR_RESET, card->bridge_io); + mdelay(1); + + iowrite8(COR_VALUE, card->bridge_io); + mdelay(1); + + /* Just in case, wait more until the card is no longer busy */ + timeout = jiffies + (TMD_RESET_TIME * HZ / 1000); + reg = hermes_read_regn(hw, CMD); + while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { + mdelay(1); + reg = hermes_read_regn(hw, CMD); + } + + /* Still busy? */ + if (reg & HERMES_CMD_BUSY) { + printk(KERN_ERR PFX "Busy timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + + +static int orinoco_tmd_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err; + struct orinoco_private *priv; + struct orinoco_pci_card *card; + struct net_device *dev; + void __iomem *hermes_io, *bridge_io; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR PFX "Cannot enable PCI device\n"); + return err; + } + + err = pci_request_regions(pdev, DRIVER_NAME); + if (err) { + printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); + goto fail_resources; + } + + bridge_io = pci_iomap(pdev, 1, 0); + if (!bridge_io) { + printk(KERN_ERR PFX "Cannot map bridge registers\n"); + err = -EIO; + goto fail_map_bridge; + } + + hermes_io = pci_iomap(pdev, 2, 0); + if (!hermes_io) { + printk(KERN_ERR PFX "Cannot map chipset registers\n"); + err = -EIO; + goto fail_map_hermes; + } + + /* Allocate network device */ + dev = alloc_orinocodev(sizeof(*card), &pdev->dev, + orinoco_tmd_cor_reset, NULL); + if (!dev) { + printk(KERN_ERR PFX "Cannot allocate network device\n"); + err = -ENOMEM; + goto fail_alloc; + } + + priv = netdev_priv(dev); + card = priv->card; + card->bridge_io = bridge_io; + SET_NETDEV_DEV(dev, &pdev->dev); + + hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); + + err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, + dev->name, dev); + if (err) { + printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); + err = -EBUSY; + goto fail_irq; + } + + err = orinoco_tmd_cor_reset(priv); + if (err) { + printk(KERN_ERR PFX "Initial reset failed\n"); + goto fail; + } + + err = register_netdev(dev); + if (err) { + printk(KERN_ERR PFX "Cannot register network device\n"); + goto fail; + } + + pci_set_drvdata(pdev, dev); + printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name, + pci_name(pdev)); + + return 0; + + fail: + free_irq(pdev->irq, dev); + + fail_irq: + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + + fail_alloc: + pci_iounmap(pdev, hermes_io); + + fail_map_hermes: + pci_iounmap(pdev, bridge_io); + + fail_map_bridge: + pci_release_regions(pdev); + + fail_resources: + pci_disable_device(pdev); + + return err; +} + +static void __devexit orinoco_tmd_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_pci_card *card = priv->card; + + unregister_netdev(dev); + free_irq(pdev->irq, dev); + pci_set_drvdata(pdev, NULL); + free_orinocodev(dev); + pci_iounmap(pdev, priv->hw.iobase); + pci_iounmap(pdev, card->bridge_io); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_device_id orinoco_tmd_id_table[] = { + {0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,}, /* NDC and OEMs, e.g. pheecom */ + {0,}, +}; + +MODULE_DEVICE_TABLE(pci, orinoco_tmd_id_table); + +static struct pci_driver orinoco_tmd_driver = { + .name = DRIVER_NAME, + .id_table = orinoco_tmd_id_table, + .probe = orinoco_tmd_init_one, + .remove = __devexit_p(orinoco_tmd_remove_one), + .suspend = orinoco_pci_suspend, + .resume = orinoco_pci_resume, +}; + +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Joerg Dorchain )"; +MODULE_AUTHOR("Joerg Dorchain "); +MODULE_DESCRIPTION("Driver for wireless LAN cards using the TMD7160 PCI bridge"); +MODULE_LICENSE("Dual MPL/GPL"); + +static int __init orinoco_tmd_init(void) +{ + printk(KERN_DEBUG "%s\n", version); + return pci_register_driver(&orinoco_tmd_driver); +} + +static void __exit orinoco_tmd_exit(void) +{ + pci_unregister_driver(&orinoco_tmd_driver); +} + +module_init(orinoco_tmd_init); +module_exit(orinoco_tmd_exit); + +/* + * Local variables: + * c-indent-level: 8 + * c-basic-offset: 8 + * tab-width: 8 + * End: + */ diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c new file mode 100644 index 000000000000..852789ad34b3 --- /dev/null +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -0,0 +1,507 @@ +/* + * Driver for 802.11b cards using RAM-loadable Symbol firmware, such as + * Symbol Wireless Networker LA4137, CompactFlash cards by Socket + * Communications and Intel PRO/Wireless 2011B. + * + * The driver implements Symbol firmware download. The rest is handled + * in hermes.c and orinoco.c. + * + * Utilities for downloading the Symbol firmware are available at + * http://sourceforge.net/projects/orinoco/ + * + * Copyright (C) 2002-2005 Pavel Roskin + * Portions based on orinoco_cs.c: + * Copyright (C) David Gibson, Linuxcare Australia + * Portions based on Spectrum24tDnld.c from original spectrum24 driver: + * Copyright (C) Symbol Technologies. + * + * See copyright notice in file orinoco.c. + */ + +#define DRIVER_NAME "spectrum_cs" +#define PFX DRIVER_NAME ": " + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "orinoco.h" + +/********************************************************************/ +/* Module stuff */ +/********************************************************************/ + +MODULE_AUTHOR("Pavel Roskin "); +MODULE_DESCRIPTION("Driver for Symbol Spectrum24 Trilogy cards with firmware downloader"); +MODULE_LICENSE("Dual MPL/GPL"); + +/* Module parameters */ + +/* Some D-Link cards have buggy CIS. They do work at 5v properly, but + * don't have any CIS entry for it. This workaround it... */ +static int ignore_cis_vcc; /* = 0 */ +module_param(ignore_cis_vcc, int, 0); +MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket"); + +/********************************************************************/ +/* Data structures */ +/********************************************************************/ + +/* PCMCIA specific device information (goes in the card field of + * struct orinoco_private */ +struct orinoco_pccard { + struct pcmcia_device *p_dev; + dev_node_t node; +}; + +/********************************************************************/ +/* Function prototypes */ +/********************************************************************/ + +static int spectrum_cs_config(struct pcmcia_device *link); +static void spectrum_cs_release(struct pcmcia_device *link); + +/* Constants for the CISREG_CCSR register */ +#define HCR_RUN 0x07 /* run firmware after reset */ +#define HCR_IDLE 0x0E /* don't run firmware after reset */ +#define HCR_MEM16 0x10 /* memory width bit, should be preserved */ + + +#define CS_CHECK(fn, ret) \ + do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +/* + * Reset the card using configuration registers COR and CCSR. + * If IDLE is 1, stop the firmware, so that it can be safely rewritten. + */ +static int +spectrum_reset(struct pcmcia_device *link, int idle) +{ + int last_ret, last_fn; + conf_reg_t reg; + u_int save_cor; + + /* Doing it if hardware is gone is guaranteed crash */ + if (!pcmcia_dev_present(link)) + return -ENODEV; + + /* Save original COR value */ + reg.Function = 0; + reg.Action = CS_READ; + reg.Offset = CISREG_COR; + CS_CHECK(AccessConfigurationRegister, + pcmcia_access_configuration_register(link, ®)); + save_cor = reg.Value; + + /* Soft-Reset card */ + reg.Action = CS_WRITE; + reg.Offset = CISREG_COR; + reg.Value = (save_cor | COR_SOFT_RESET); + CS_CHECK(AccessConfigurationRegister, + pcmcia_access_configuration_register(link, ®)); + udelay(1000); + + /* Read CCSR */ + reg.Action = CS_READ; + reg.Offset = CISREG_CCSR; + CS_CHECK(AccessConfigurationRegister, + pcmcia_access_configuration_register(link, ®)); + + /* + * Start or stop the firmware. Memory width bit should be + * preserved from the value we've just read. + */ + reg.Action = CS_WRITE; + reg.Offset = CISREG_CCSR; + reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16); + CS_CHECK(AccessConfigurationRegister, + pcmcia_access_configuration_register(link, ®)); + udelay(1000); + + /* Restore original COR configuration index */ + reg.Action = CS_WRITE; + reg.Offset = CISREG_COR; + reg.Value = (save_cor & ~COR_SOFT_RESET); + CS_CHECK(AccessConfigurationRegister, + pcmcia_access_configuration_register(link, ®)); + udelay(1000); + return 0; + + cs_failed: + cs_error(link, last_fn, last_ret); + return -ENODEV; +} + +/********************************************************************/ +/* Device methods */ +/********************************************************************/ + +static int +spectrum_cs_hard_reset(struct orinoco_private *priv) +{ + struct orinoco_pccard *card = priv->card; + struct pcmcia_device *link = card->p_dev; + + /* Soft reset using COR and HCR */ + spectrum_reset(link, 0); + + return 0; +} + +static int +spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) +{ + struct orinoco_pccard *card = priv->card; + struct pcmcia_device *link = card->p_dev; + + return spectrum_reset(link, idle); +} + +/********************************************************************/ +/* PCMCIA stuff */ +/********************************************************************/ + +/* + * This creates an "instance" of the driver, allocating local data + * structures for one device. The device is registered with Card + * Services. + * + * The dev_link structure is initialized, but we don't actually + * configure the card at this point -- we wait until we receive a card + * insertion event. */ +static int +spectrum_cs_probe(struct pcmcia_device *link) +{ + struct net_device *dev; + struct orinoco_private *priv; + struct orinoco_pccard *card; + + dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), + spectrum_cs_hard_reset, + spectrum_cs_stop_firmware); + if (! dev) + return -ENOMEM; + priv = netdev_priv(dev); + card = priv->card; + + /* Link both structures together */ + card->p_dev = link; + link->priv = dev; + + /* Interrupt setup */ + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Handler = orinoco_interrupt; + link->irq.Instance = dev; + + /* General socket configuration defaults can go here. In this + * client, we assume very little, and rely on the CIS for + * almost everything. In most clients, many details (i.e., + * number, sizes, and attributes of IO windows) are fixed by + * the nature of the device, and can be hard-wired here. */ + link->conf.Attributes = 0; + link->conf.IntType = INT_MEMORY_AND_IO; + + return spectrum_cs_config(link); +} /* spectrum_cs_attach */ + +/* + * This deletes a driver "instance". The device is de-registered with + * Card Services. If it has been released, all local data structures + * are freed. Otherwise, the structures will be freed when the device + * is released. + */ +static void spectrum_cs_detach(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->dev_node) + unregister_netdev(dev); + + spectrum_cs_release(link); + + free_orinocodev(dev); +} /* spectrum_cs_detach */ + +/* + * spectrum_cs_config() is scheduled to run after a CARD_INSERTION + * event is received, to configure the PCMCIA socket, and to make the + * device available to the system. + */ + +static int spectrum_cs_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + goto next_entry; + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + /* Do we need to allocate an interrupt? */ + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + goto next_entry; + } + return 0; + +next_entry: + pcmcia_disable_device(p_dev); + return -ENODEV; +}; + +static int +spectrum_cs_config(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + struct orinoco_private *priv = netdev_priv(dev); + struct orinoco_pccard *card = priv->card; + hermes_t *hw = &priv->hw; + int last_fn, last_ret; + void __iomem *mem; + + /* + * In this loop, we scan the CIS for configuration table + * entries, each of which describes a valid card + * configuration, including voltage, IO window, memory window, + * and interrupt settings. + * + * We make no assumptions about the card to be configured: we + * use just the information available in the CIS. In an ideal + * world, this would work for any PCMCIA card, but it requires + * a complete and accurate CIS. In practice, a driver usually + * "knows" most of these things without consulting the CIS, + * and most client drivers will only use the CIS to fill in + * implementation-defined details. + */ + last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); + if (last_ret) { + if (!ignore_cis_vcc) + printk(KERN_ERR PFX "GetNextTuple(): No matching " + "CIS configuration. Maybe you need the " + "ignore_cis_vcc=1 parameter.\n"); + cs_error(link, RequestIO, last_ret); + goto failed; + } + + /* + * Allocate an interrupt line. Note that this does not assign + * a handler to the interrupt, unless the 'Handler' member of + * the irq structure is initialized. + */ + CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + + /* We initialize the hermes structure before completing PCMCIA + * configuration just in case the interrupt handler gets + * called. */ + mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); + if (!mem) + goto cs_failed; + + hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); + + /* + * This actually configures the PCMCIA socket -- setting up + * the I/O windows and the interrupt mapping, and putting the + * card and host interface into "Memory and IO" mode. + */ + CS_CHECK(RequestConfiguration, + pcmcia_request_configuration(link, &link->conf)); + + /* Ok, we have the configuration, prepare to register the netdev */ + dev->base_addr = link->io.BasePort1; + dev->irq = link->irq.AssignedIRQ; + card->node.major = card->node.minor = 0; + + /* Reset card */ + if (spectrum_cs_hard_reset(priv) != 0) { + goto failed; + } + + SET_NETDEV_DEV(dev, &handle_to_dev(link)); + /* Tell the stack we exist */ + if (register_netdev(dev) != 0) { + printk(KERN_ERR PFX "register_netdev() failed\n"); + goto failed; + } + + /* At this point, the dev_node_t structure(s) needs to be + * initialized and arranged in a linked list at link->dev_node. */ + strcpy(card->node.dev_name, dev->name); + link->dev_node = &card->node; /* link->dev_node being non-NULL is also + used to indicate that the + net_device has been registered */ + + /* Finally, report what we've done */ + printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io " + "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id, + link->irq.AssignedIRQ, link->io.BasePort1, + link->io.BasePort1 + link->io.NumPorts1 - 1); + + return 0; + + cs_failed: + cs_error(link, last_fn, last_ret); + + failed: + spectrum_cs_release(link); + return -ENODEV; +} /* spectrum_cs_config */ + +/* + * After a card is removed, spectrum_cs_release() will unregister the + * device, and release the PCMCIA configuration. If the device is + * still open, this will be postponed until it is closed. + */ +static void +spectrum_cs_release(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + + /* We're committed to taking the device away now, so mark the + * hardware as unavailable */ + spin_lock_irqsave(&priv->lock, flags); + priv->hw_unavailable++; + spin_unlock_irqrestore(&priv->lock, flags); + + pcmcia_disable_device(link); + if (priv->hw.iobase) + ioport_unmap(priv->hw.iobase); +} /* spectrum_cs_release */ + + +static int +spectrum_cs_suspend(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err = 0; + + /* Mark the device as stopped, to block IO until later */ + spin_lock_irqsave(&priv->lock, flags); + + err = __orinoco_down(dev); + if (err) + printk(KERN_WARNING "%s: Error %d downing interface\n", + dev->name, err); + + netif_device_detach(dev); + priv->hw_unavailable++; + + spin_unlock_irqrestore(&priv->lock, flags); + + return err; +} + +static int +spectrum_cs_resume(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + struct orinoco_private *priv = netdev_priv(dev); + + netif_device_attach(dev); + priv->hw_unavailable--; + schedule_work(&priv->reset_work); + + return 0; +} + + +/********************************************************************/ +/* Module initialization */ +/********************************************************************/ + +/* Can't be declared "const" or the whole __initdata section will + * become const */ +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Pavel Roskin ," + " David Gibson , et al)"; + +static struct pcmcia_device_id spectrum_cs_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */ + PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */ + PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */ + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids); + +static struct pcmcia_driver orinoco_driver = { + .owner = THIS_MODULE, + .drv = { + .name = DRIVER_NAME, + }, + .probe = spectrum_cs_probe, + .remove = spectrum_cs_detach, + .suspend = spectrum_cs_suspend, + .resume = spectrum_cs_resume, + .id_table = spectrum_cs_ids, +}; + +static int __init +init_spectrum_cs(void) +{ + printk(KERN_DEBUG "%s\n", version); + + return pcmcia_register_driver(&orinoco_driver); +} + +static void __exit +exit_spectrum_cs(void) +{ + pcmcia_unregister_driver(&orinoco_driver); +} + +module_init(init_spectrum_cs); +module_exit(exit_spectrum_cs); diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c deleted file mode 100644 index 6fcf2bda7cdf..000000000000 --- a/drivers/net/wireless/orinoco_cs.c +++ /dev/null @@ -1,533 +0,0 @@ -/* orinoco_cs.c (formerly known as dldwd_cs.c) - * - * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such - * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ - * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others). - * It should also be usable on various Prism II based cards such as the - * Linksys, D-Link and Farallon Skyline. It should also work on Symbol - * cards such as the 3Com AirConnect and Ericsson WLAN. - * - * Copyright notice & release notes in file orinoco.c - */ - -#define DRIVER_NAME "orinoco_cs" -#define PFX DRIVER_NAME ": " - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "orinoco.h" - -/********************************************************************/ -/* Module stuff */ -/********************************************************************/ - -MODULE_AUTHOR("David Gibson "); -MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards"); -MODULE_LICENSE("Dual MPL/GPL"); - -/* Module parameters */ - -/* Some D-Link cards have buggy CIS. They do work at 5v properly, but - * don't have any CIS entry for it. This workaround it... */ -static int ignore_cis_vcc; /* = 0 */ -module_param(ignore_cis_vcc, int, 0); -MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket"); - -/********************************************************************/ -/* Data structures */ -/********************************************************************/ - -/* PCMCIA specific device information (goes in the card field of - * struct orinoco_private */ -struct orinoco_pccard { - struct pcmcia_device *p_dev; - dev_node_t node; - - /* Used to handle hard reset */ - /* yuck, we need this hack to work around the insanity of the - * PCMCIA layer */ - unsigned long hard_reset_in_progress; -}; - - -/********************************************************************/ -/* Function prototypes */ -/********************************************************************/ - -static int orinoco_cs_config(struct pcmcia_device *link); -static void orinoco_cs_release(struct pcmcia_device *link); -static void orinoco_cs_detach(struct pcmcia_device *p_dev); - -/********************************************************************/ -/* Device methods */ -/********************************************************************/ - -static int -orinoco_cs_hard_reset(struct orinoco_private *priv) -{ - struct orinoco_pccard *card = priv->card; - struct pcmcia_device *link = card->p_dev; - int err; - - /* We need atomic ops here, because we're not holding the lock */ - set_bit(0, &card->hard_reset_in_progress); - - err = pcmcia_reset_card(link->socket); - if (err) - return err; - - msleep(100); - clear_bit(0, &card->hard_reset_in_progress); - - return 0; -} - -/********************************************************************/ -/* PCMCIA stuff */ -/********************************************************************/ - -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ -static int -orinoco_cs_probe(struct pcmcia_device *link) -{ - struct net_device *dev; - struct orinoco_private *priv; - struct orinoco_pccard *card; - - dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), - orinoco_cs_hard_reset, NULL); - if (! dev) - return -ENOMEM; - priv = netdev_priv(dev); - card = priv->card; - - /* Link both structures together */ - card->p_dev = link; - link->priv = dev; - - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; - link->irq.Handler = orinoco_interrupt; - link->irq.Instance = dev; - - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - - return orinoco_cs_config(link); -} /* orinoco_cs_attach */ - -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ -static void orinoco_cs_detach(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - - if (link->dev_node) - unregister_netdev(dev); - - orinoco_cs_release(link); - - free_orinocodev(dev); -} /* orinoco_cs_detach */ - -/* - * orinoco_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - -#define CS_CHECK(fn, ret) do { \ - last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \ - } while (0) - -static int orinoco_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) -{ - if (cfg->index == 0) - goto next_entry; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) - goto next_entry; - } - return 0; - -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; -}; - -static int -orinoco_cs_config(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); - struct orinoco_pccard *card = priv->card; - hermes_t *hw = &priv->hw; - int last_fn, last_ret; - void __iomem *mem; - - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ - last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); - if (last_ret) { - if (!ignore_cis_vcc) - printk(KERN_ERR PFX "GetNextTuple(): No matching " - "CIS configuration. Maybe you need the " - "ignore_cis_vcc=1 parameter.\n"); - cs_error(link, RequestIO, last_ret); - goto failed; - } - - /* - * Allocate an interrupt line. Note that this does not assign - * a handler to the interrupt, unless the 'Handler' member of - * the irq structure is initialized. - */ - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); - - /* We initialize the hermes structure before completing PCMCIA - * configuration just in case the interrupt handler gets - * called. */ - mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); - if (!mem) - goto cs_failed; - - hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); - - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - CS_CHECK(RequestConfiguration, - pcmcia_request_configuration(link, &link->conf)); - - /* Ok, we have the configuration, prepare to register the netdev */ - dev->base_addr = link->io.BasePort1; - dev->irq = link->irq.AssignedIRQ; - card->node.major = card->node.minor = 0; - - SET_NETDEV_DEV(dev, &handle_to_dev(link)); - /* Tell the stack we exist */ - if (register_netdev(dev) != 0) { - printk(KERN_ERR PFX "register_netdev() failed\n"); - goto failed; - } - - /* At this point, the dev_node_t structure(s) needs to be - * initialized and arranged in a linked list at link->dev_node. */ - strcpy(card->node.dev_name, dev->name); - link->dev_node = &card->node; /* link->dev_node being non-NULL is also - used to indicate that the - net_device has been registered */ - - /* Finally, report what we've done */ - printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io " - "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id, - link->irq.AssignedIRQ, link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - return 0; - - cs_failed: - cs_error(link, last_fn, last_ret); - - failed: - orinoco_cs_release(link); - return -ENODEV; -} /* orinoco_cs_config */ - -/* - * After a card is removed, orinoco_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ -static void -orinoco_cs_release(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - - /* We're committed to taking the device away now, so mark the - * hardware as unavailable */ - spin_lock_irqsave(&priv->lock, flags); - priv->hw_unavailable++; - spin_unlock_irqrestore(&priv->lock, flags); - - pcmcia_disable_device(link); - if (priv->hw.iobase) - ioport_unmap(priv->hw.iobase); -} /* orinoco_cs_release */ - -static int orinoco_cs_suspend(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); - struct orinoco_pccard *card = priv->card; - int err = 0; - unsigned long flags; - - /* This is probably racy, but I can't think of - a better way, short of rewriting the PCMCIA - layer to not suck :-( */ - if (! test_bit(0, &card->hard_reset_in_progress)) { - spin_lock_irqsave(&priv->lock, flags); - - err = __orinoco_down(dev); - if (err) - printk(KERN_WARNING "%s: Error %d downing interface\n", - dev->name, err); - - netif_device_detach(dev); - priv->hw_unavailable++; - - spin_unlock_irqrestore(&priv->lock, flags); - } - - return 0; -} - -static int orinoco_cs_resume(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); - struct orinoco_pccard *card = priv->card; - int err = 0; - unsigned long flags; - - if (! test_bit(0, &card->hard_reset_in_progress)) { - err = orinoco_reinit_firmware(dev); - if (err) { - printk(KERN_ERR "%s: Error %d re-initializing firmware\n", - dev->name, err); - return -EIO; - } - - spin_lock_irqsave(&priv->lock, flags); - - netif_device_attach(dev); - priv->hw_unavailable--; - - if (priv->open && ! priv->hw_unavailable) { - err = __orinoco_up(dev); - if (err) - printk(KERN_ERR "%s: Error %d restarting card\n", - dev->name, err); - } - - spin_unlock_irqrestore(&priv->lock, flags); - } - - return err; -} - - -/********************************************************************/ -/* Module initialization */ -/********************************************************************/ - -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (David Gibson , " - "Pavel Roskin , et al)"; - -static struct pcmcia_device_id orinoco_cs_ids[] = { - PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */ - PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */ - PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */ - PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ - PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */ - PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */ - PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */ - PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */ - PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */ - PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */ - PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */ - PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */ - PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */ - PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */ - PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */ - PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */ - PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */ - PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */ - PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */ - PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */ - PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */ - PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */ - PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */ - PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */ - PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */ - PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */ - PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */ - PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */ - PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9), - PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3), - PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5), - PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2), - PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092), - PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f), - PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842), - PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e), - PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169), - PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb), - PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3), - PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18), - PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90), - PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b), - PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584), - PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9), - PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae), - PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac), - PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab), - PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916), - PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146), - PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3), - PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c), - PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0), - PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077), - PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18), - PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77), - PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf), - PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2), - PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92), - PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395), - PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a), - PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410), - PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3), - PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01), - PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a), - PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1), - PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1), - PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767), - PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6), - PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed), - PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39), - PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264), - PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178), - PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9), - PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26), - PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b), - PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757), - PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a), - PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e), - PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39), - PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee), - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); - -static struct pcmcia_driver orinoco_driver = { - .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, - .probe = orinoco_cs_probe, - .remove = orinoco_cs_detach, - .id_table = orinoco_cs_ids, - .suspend = orinoco_cs_suspend, - .resume = orinoco_cs_resume, -}; - -static int __init -init_orinoco_cs(void) -{ - printk(KERN_DEBUG "%s\n", version); - - return pcmcia_register_driver(&orinoco_driver); -} - -static void __exit -exit_orinoco_cs(void) -{ - pcmcia_unregister_driver(&orinoco_driver); -} - -module_init(init_orinoco_cs); -module_exit(exit_orinoco_cs); diff --git a/drivers/net/wireless/orinoco_nortel.c b/drivers/net/wireless/orinoco_nortel.c deleted file mode 100644 index 2fc86596302e..000000000000 --- a/drivers/net/wireless/orinoco_nortel.c +++ /dev/null @@ -1,324 +0,0 @@ -/* orinoco_nortel.c - * - * Driver for Prism II devices which would usually be driven by orinoco_cs, - * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in - * Nortel emobility, Symbol LA-4113 and Symbol LA-4123. - * - * Copyright (C) 2002 Tobias Hoffmann - * (C) 2003 Christoph Jungegger - * - * Some of this code is borrowed from orinoco_plx.c - * Copyright (C) 2001 Daniel Barlow - * Some of this code is borrowed from orinoco_pci.c - * Copyright (C) 2001 Jean Tourrilhes - * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing - * has been copied from it. linux-wlan-ng-0.1.10 is originally : - * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#define DRIVER_NAME "orinoco_nortel" -#define PFX DRIVER_NAME ": " - -#include -#include -#include -#include -#include -#include - -#include "orinoco.h" -#include "orinoco_pci.h" - -#define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */ -#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ - - -/* - * Do a soft reset of the card using the Configuration Option Register - * We need this to get going... - * This is the part of the code that is strongly inspired from wlan-ng - * - * Note bis : Don't try to access HERMES_CMD during the reset phase. - * It just won't work ! - */ -static int orinoco_nortel_cor_reset(struct orinoco_private *priv) -{ - struct orinoco_pci_card *card = priv->card; - - /* Assert the reset until the card notices */ - iowrite16(8, card->bridge_io + 2); - ioread16(card->attr_io + COR_OFFSET); - iowrite16(0x80, card->attr_io + COR_OFFSET); - mdelay(1); - - /* Give time for the card to recover from this hard effort */ - iowrite16(0, card->attr_io + COR_OFFSET); - iowrite16(0, card->attr_io + COR_OFFSET); - mdelay(1); - - /* Set COR as usual */ - iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); - iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); - mdelay(1); - - iowrite16(0x228, card->bridge_io + 2); - - return 0; -} - -static int orinoco_nortel_hw_init(struct orinoco_pci_card *card) -{ - int i; - u32 reg; - - /* Setup bridge */ - if (ioread16(card->bridge_io) & 1) { - printk(KERN_ERR PFX "brg1 answer1 wrong\n"); - return -EBUSY; - } - iowrite16(0x118, card->bridge_io + 2); - iowrite16(0x108, card->bridge_io + 2); - mdelay(30); - iowrite16(0x8, card->bridge_io + 2); - for (i = 0; i < 30; i++) { - mdelay(30); - if (ioread16(card->bridge_io) & 0x10) { - break; - } - } - if (i == 30) { - printk(KERN_ERR PFX "brg1 timed out\n"); - return -EBUSY; - } - if (ioread16(card->attr_io + COR_OFFSET) & 1) { - printk(KERN_ERR PFX "brg2 answer1 wrong\n"); - return -EBUSY; - } - if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) { - printk(KERN_ERR PFX "brg2 answer2 wrong\n"); - return -EBUSY; - } - if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) { - printk(KERN_ERR PFX "brg2 answer3 wrong\n"); - return -EBUSY; - } - - /* Set the PCMCIA COR register */ - iowrite16(COR_VALUE, card->attr_io + COR_OFFSET); - mdelay(1); - reg = ioread16(card->attr_io + COR_OFFSET); - if (reg != COR_VALUE) { - printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n", - reg); - return -EBUSY; - } - - /* Set LEDs */ - iowrite16(1, card->bridge_io + 10); - return 0; -} - -static int orinoco_nortel_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int err; - struct orinoco_private *priv; - struct orinoco_pci_card *card; - struct net_device *dev; - void __iomem *hermes_io, *bridge_io, *attr_io; - - err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR PFX "Cannot enable PCI device\n"); - return err; - } - - err = pci_request_regions(pdev, DRIVER_NAME); - if (err) { - printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); - goto fail_resources; - } - - bridge_io = pci_iomap(pdev, 0, 0); - if (!bridge_io) { - printk(KERN_ERR PFX "Cannot map bridge registers\n"); - err = -EIO; - goto fail_map_bridge; - } - - attr_io = pci_iomap(pdev, 1, 0); - if (!attr_io) { - printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); - err = -EIO; - goto fail_map_attr; - } - - hermes_io = pci_iomap(pdev, 2, 0); - if (!hermes_io) { - printk(KERN_ERR PFX "Cannot map chipset registers\n"); - err = -EIO; - goto fail_map_hermes; - } - - /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), &pdev->dev, - orinoco_nortel_cor_reset, NULL); - if (!dev) { - printk(KERN_ERR PFX "Cannot allocate network device\n"); - err = -ENOMEM; - goto fail_alloc; - } - - priv = netdev_priv(dev); - card = priv->card; - card->bridge_io = bridge_io; - card->attr_io = attr_io; - SET_NETDEV_DEV(dev, &pdev->dev); - - hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); - - err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - dev->name, dev); - if (err) { - printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); - err = -EBUSY; - goto fail_irq; - } - - err = orinoco_nortel_hw_init(card); - if (err) { - printk(KERN_ERR PFX "Hardware initialization failed\n"); - goto fail; - } - - err = orinoco_nortel_cor_reset(priv); - if (err) { - printk(KERN_ERR PFX "Initial reset failed\n"); - goto fail; - } - - err = register_netdev(dev); - if (err) { - printk(KERN_ERR PFX "Cannot register network device\n"); - goto fail; - } - - pci_set_drvdata(pdev, dev); - printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name, - pci_name(pdev)); - - return 0; - - fail: - free_irq(pdev->irq, dev); - - fail_irq: - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); - - fail_alloc: - pci_iounmap(pdev, hermes_io); - - fail_map_hermes: - pci_iounmap(pdev, attr_io); - - fail_map_attr: - pci_iounmap(pdev, bridge_io); - - fail_map_bridge: - pci_release_regions(pdev); - - fail_resources: - pci_disable_device(pdev); - - return err; -} - -static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct orinoco_private *priv = netdev_priv(dev); - struct orinoco_pci_card *card = priv->card; - - /* Clear LEDs */ - iowrite16(0, card->bridge_io + 10); - - unregister_netdev(dev); - free_irq(pdev->irq, dev); - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); - pci_iounmap(pdev, priv->hw.iobase); - pci_iounmap(pdev, card->attr_io); - pci_iounmap(pdev, card->bridge_io); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -static struct pci_device_id orinoco_nortel_id_table[] = { - /* Nortel emobility PCI */ - {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,}, - /* Symbol LA-4123 PCI */ - {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,}, - {0,}, -}; - -MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table); - -static struct pci_driver orinoco_nortel_driver = { - .name = DRIVER_NAME, - .id_table = orinoco_nortel_id_table, - .probe = orinoco_nortel_init_one, - .remove = __devexit_p(orinoco_nortel_remove_one), - .suspend = orinoco_pci_suspend, - .resume = orinoco_pci_resume, -}; - -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Tobias Hoffmann & Christoph Jungegger )"; -MODULE_AUTHOR("Christoph Jungegger "); -MODULE_DESCRIPTION - ("Driver for wireless LAN cards using the Nortel PCI bridge"); -MODULE_LICENSE("Dual MPL/GPL"); - -static int __init orinoco_nortel_init(void) -{ - printk(KERN_DEBUG "%s\n", version); - return pci_register_driver(&orinoco_nortel_driver); -} - -static void __exit orinoco_nortel_exit(void) -{ - pci_unregister_driver(&orinoco_nortel_driver); -} - -module_init(orinoco_nortel_init); -module_exit(orinoco_nortel_exit); - -/* - * Local variables: - * c-indent-level: 8 - * c-basic-offset: 8 - * tab-width: 8 - * End: - */ diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c deleted file mode 100644 index 4ebd638a073e..000000000000 --- a/drivers/net/wireless/orinoco_pci.c +++ /dev/null @@ -1,264 +0,0 @@ -/* orinoco_pci.c - * - * Driver for Prism 2.5/3 devices that have a direct PCI interface - * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge). - * The card contains only one PCI region, which contains all the usual - * hermes registers, as well as the COR register. - * - * Current maintainers are: - * Pavel Roskin - * and David Gibson - * - * Some of this code is borrowed from orinoco_plx.c - * Copyright (C) 2001 Daniel Barlow - * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing - * has been copied from it. linux-wlan-ng-0.1.10 is originally : - * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. - * This file originally written by: - * Copyright (C) 2001 Jean Tourrilhes - * And is now maintained by: - * (C) Copyright David Gibson, IBM Corp. 2002-2003. - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#define DRIVER_NAME "orinoco_pci" -#define PFX DRIVER_NAME ": " - -#include -#include -#include -#include -#include - -#include "orinoco.h" -#include "orinoco_pci.h" - -/* Offset of the COR register of the PCI card */ -#define HERMES_PCI_COR (0x26) - -/* Bitmask to reset the card */ -#define HERMES_PCI_COR_MASK (0x0080) - -/* Magic timeouts for doing the reset. - * Those times are straight from wlan-ng, and it is claimed that they - * are necessary. Alan will kill me. Take your time and grab a coffee. */ -#define HERMES_PCI_COR_ONT (250) /* ms */ -#define HERMES_PCI_COR_OFFT (500) /* ms */ -#define HERMES_PCI_COR_BUSYT (500) /* ms */ - -/* - * Do a soft reset of the card using the Configuration Option Register - * We need this to get going... - * This is the part of the code that is strongly inspired from wlan-ng - * - * Note : This code is done with irq enabled. This mean that many - * interrupts will occur while we are there. This is why we use the - * jiffies to regulate time instead of a straight mdelay(). Usually we - * need only around 245 iteration of the loop to do 250 ms delay. - * - * Note bis : Don't try to access HERMES_CMD during the reset phase. - * It just won't work ! - */ -static int orinoco_pci_cor_reset(struct orinoco_private *priv) -{ - hermes_t *hw = &priv->hw; - unsigned long timeout; - u16 reg; - - /* Assert the reset until the card notices */ - hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK); - mdelay(HERMES_PCI_COR_ONT); - - /* Give time for the card to recover from this hard effort */ - hermes_write_regn(hw, PCI_COR, 0x0000); - mdelay(HERMES_PCI_COR_OFFT); - - /* The card is ready when it's no longer busy */ - timeout = jiffies + (HERMES_PCI_COR_BUSYT * HZ / 1000); - reg = hermes_read_regn(hw, CMD); - while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { - mdelay(1); - reg = hermes_read_regn(hw, CMD); - } - - /* Still busy? */ - if (reg & HERMES_CMD_BUSY) { - printk(KERN_ERR PFX "Busy timeout\n"); - return -ETIMEDOUT; - } - - return 0; -} - -static int orinoco_pci_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int err; - struct orinoco_private *priv; - struct orinoco_pci_card *card; - struct net_device *dev; - void __iomem *hermes_io; - - err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR PFX "Cannot enable PCI device\n"); - return err; - } - - err = pci_request_regions(pdev, DRIVER_NAME); - if (err) { - printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); - goto fail_resources; - } - - hermes_io = pci_iomap(pdev, 0, 0); - if (!hermes_io) { - printk(KERN_ERR PFX "Cannot remap chipset registers\n"); - err = -EIO; - goto fail_map_hermes; - } - - /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), &pdev->dev, - orinoco_pci_cor_reset, NULL); - if (!dev) { - printk(KERN_ERR PFX "Cannot allocate network device\n"); - err = -ENOMEM; - goto fail_alloc; - } - - priv = netdev_priv(dev); - card = priv->card; - SET_NETDEV_DEV(dev, &pdev->dev); - - hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING); - - err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - dev->name, dev); - if (err) { - printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); - err = -EBUSY; - goto fail_irq; - } - - err = orinoco_pci_cor_reset(priv); - if (err) { - printk(KERN_ERR PFX "Initial reset failed\n"); - goto fail; - } - - err = register_netdev(dev); - if (err) { - printk(KERN_ERR PFX "Cannot register network device\n"); - goto fail; - } - - pci_set_drvdata(pdev, dev); - printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name, - pci_name(pdev)); - - return 0; - - fail: - free_irq(pdev->irq, dev); - - fail_irq: - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); - - fail_alloc: - pci_iounmap(pdev, hermes_io); - - fail_map_hermes: - pci_release_regions(pdev); - - fail_resources: - pci_disable_device(pdev); - - return err; -} - -static void __devexit orinoco_pci_remove_one(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct orinoco_private *priv = netdev_priv(dev); - - unregister_netdev(dev); - free_irq(pdev->irq, dev); - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); - pci_iounmap(pdev, priv->hw.iobase); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -static struct pci_device_id orinoco_pci_id_table[] = { - /* Intersil Prism 3 */ - {0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,}, - /* Intersil Prism 2.5 */ - {0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,}, - /* Samsung MagicLAN SWL-2210P */ - {0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,}, - {0,}, -}; - -MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table); - -static struct pci_driver orinoco_pci_driver = { - .name = DRIVER_NAME, - .id_table = orinoco_pci_id_table, - .probe = orinoco_pci_init_one, - .remove = __devexit_p(orinoco_pci_remove_one), - .suspend = orinoco_pci_suspend, - .resume = orinoco_pci_resume, -}; - -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Pavel Roskin ," - " David Gibson &" - " Jean Tourrilhes )"; -MODULE_AUTHOR("Pavel Roskin & David Gibson "); -MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface"); -MODULE_LICENSE("Dual MPL/GPL"); - -static int __init orinoco_pci_init(void) -{ - printk(KERN_DEBUG "%s\n", version); - return pci_register_driver(&orinoco_pci_driver); -} - -static void __exit orinoco_pci_exit(void) -{ - pci_unregister_driver(&orinoco_pci_driver); -} - -module_init(orinoco_pci_init); -module_exit(orinoco_pci_exit); - -/* - * Local variables: - * c-indent-level: 8 - * c-basic-offset: 8 - * tab-width: 8 - * End: - */ diff --git a/drivers/net/wireless/orinoco_pci.h b/drivers/net/wireless/orinoco_pci.h deleted file mode 100644 index f4e5e06760c1..000000000000 --- a/drivers/net/wireless/orinoco_pci.h +++ /dev/null @@ -1,109 +0,0 @@ -/* orinoco_pci.h - * - * Common code for all Orinoco drivers for PCI devices, including - * both native PCI and PCMCIA-to-PCI bridges. - * - * Copyright (C) 2005, Pavel Roskin. - * See orinoco.c for license. - */ - -#ifndef _ORINOCO_PCI_H -#define _ORINOCO_PCI_H - -#include - -/* Driver specific data */ -struct orinoco_pci_card { - void __iomem *bridge_io; - void __iomem *attr_io; -}; - -#ifdef CONFIG_PM -static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - int err; - - err = orinoco_lock(priv, &flags); - if (err) { - printk(KERN_ERR "%s: cannot lock hardware for suspend\n", - dev->name); - return err; - } - - err = __orinoco_down(dev); - if (err) - printk(KERN_WARNING "%s: error %d bringing interface down " - "for suspend\n", dev->name, err); - - netif_device_detach(dev); - - priv->hw_unavailable++; - - orinoco_unlock(priv, &flags); - - free_irq(pdev->irq, dev); - pci_save_state(pdev); - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); - - return 0; -} - -static int orinoco_pci_resume(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - int err; - - pci_set_power_state(pdev, 0); - err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR "%s: pci_enable_device failed on resume\n", - dev->name); - return err; - } - pci_restore_state(pdev); - - err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - dev->name, dev); - if (err) { - printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n", - dev->name); - pci_disable_device(pdev); - return -EBUSY; - } - - err = orinoco_reinit_firmware(dev); - if (err) { - printk(KERN_ERR "%s: error %d re-initializing firmware " - "on resume\n", dev->name, err); - return err; - } - - spin_lock_irqsave(&priv->lock, flags); - - netif_device_attach(dev); - - priv->hw_unavailable--; - - if (priv->open && (! priv->hw_unavailable)) { - err = __orinoco_up(dev); - if (err) - printk(KERN_ERR "%s: Error %d restarting card on resume\n", - dev->name, err); - } - - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} -#else -#define orinoco_pci_suspend NULL -#define orinoco_pci_resume NULL -#endif - -#endif /* _ORINOCO_PCI_H */ diff --git a/drivers/net/wireless/orinoco_plx.c b/drivers/net/wireless/orinoco_plx.c deleted file mode 100644 index ef761857bb38..000000000000 --- a/drivers/net/wireless/orinoco_plx.c +++ /dev/null @@ -1,371 +0,0 @@ -/* orinoco_plx.c - * - * Driver for Prism II devices which would usually be driven by orinoco_cs, - * but are connected to the PCI bus by a PLX9052. - * - * Current maintainers are: - * Pavel Roskin - * and David Gibson - * - * (C) Copyright David Gibson, IBM Corp. 2001-2003. - * Copyright (C) 2001 Daniel Barlow - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - * - * Here's the general details on how the PLX9052 adapter works: - * - * - Two PCI I/O address spaces, one 0x80 long which contains the - * PLX9052 registers, and one that's 0x40 long mapped to the PCMCIA - * slot I/O address space. - * - * - One PCI memory address space, mapped to the PCMCIA attribute space - * (containing the CIS). - * - * Using the later, you can read through the CIS data to make sure the - * card is compatible with the driver. Keep in mind that the PCMCIA - * spec specifies the CIS as the lower 8 bits of each word read from - * the CIS, so to read the bytes of the CIS, read every other byte - * (0,2,4,...). Passing that test, you need to enable the I/O address - * space on the PCMCIA card via the PCMCIA COR register. This is the - * first byte following the CIS. In my case (which may not have any - * relation to what's on the PRISM2 cards), COR was at offset 0x800 - * within the PCI memory space. Write 0x41 to the COR register to - * enable I/O mode and to select level triggered interrupts. To - * confirm you actually succeeded, read the COR register back and make - * sure it actually got set to 0x41, in case you have an unexpected - * card inserted. - * - * Following that, you can treat the second PCI I/O address space (the - * one that's not 0x80 in length) as the PCMCIA I/O space. - * - * Note that in the Eumitcom's source for their drivers, they register - * the interrupt as edge triggered when registering it with the - * Windows kernel. I don't recall how to register edge triggered on - * Linux (if it can be done at all). But in some experimentation, I - * don't see much operational difference between using either - * interrupt mode. Don't mess with the interrupt mode in the COR - * register though, as the PLX9052 wants level triggers with the way - * the serial EEPROM configures it on the WL11000. - * - * There's some other little quirks related to timing that I bumped - * into, but I don't recall right now. Also, there's two variants of - * the WL11000 I've seen, revision A1 and T2. These seem to differ - * slightly in the timings configured in the wait-state generator in - * the PLX9052. There have also been some comments from Eumitcom that - * cards shouldn't be hot swapped, apparently due to risk of cooking - * the PLX9052. I'm unsure why they believe this, as I can't see - * anything in the design that would really cause a problem, except - * for crashing drivers not written to expect it. And having developed - * drivers for the WL11000, I'd say it's quite tricky to write code - * that will successfully deal with a hot unplug. Very odd things - * happen on the I/O side of things. But anyway, be warned. Despite - * that, I've hot-swapped a number of times during debugging and - * driver development for various reasons (stuck WAIT# line after the - * radio card's firmware locks up). - */ - -#define DRIVER_NAME "orinoco_plx" -#define PFX DRIVER_NAME ": " - -#include -#include -#include -#include -#include -#include - -#include "orinoco.h" -#include "orinoco_pci.h" - -#define COR_OFFSET (0x3e0) /* COR attribute offset of Prism2 PC card */ -#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ -#define COR_RESET (0x80) /* reset bit in the COR register */ -#define PLX_RESET_TIME (500) /* milliseconds */ - -#define PLX_INTCSR 0x4c /* Interrupt Control & Status Register */ -#define PLX_INTCSR_INTEN (1<<6) /* Interrupt Enable bit */ - -/* - * Do a soft reset of the card using the Configuration Option Register - */ -static int orinoco_plx_cor_reset(struct orinoco_private *priv) -{ - hermes_t *hw = &priv->hw; - struct orinoco_pci_card *card = priv->card; - unsigned long timeout; - u16 reg; - - iowrite8(COR_VALUE | COR_RESET, card->attr_io + COR_OFFSET); - mdelay(1); - - iowrite8(COR_VALUE, card->attr_io + COR_OFFSET); - mdelay(1); - - /* Just in case, wait more until the card is no longer busy */ - timeout = jiffies + (PLX_RESET_TIME * HZ / 1000); - reg = hermes_read_regn(hw, CMD); - while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { - mdelay(1); - reg = hermes_read_regn(hw, CMD); - } - - /* Still busy? */ - if (reg & HERMES_CMD_BUSY) { - printk(KERN_ERR PFX "Busy timeout\n"); - return -ETIMEDOUT; - } - - return 0; -} - -static int orinoco_plx_hw_init(struct orinoco_pci_card *card) -{ - int i; - u32 csr_reg; - static const u8 cis_magic[] = { - 0x01, 0x03, 0x00, 0x00, 0xff, 0x17, 0x04, 0x67 - }; - - printk(KERN_DEBUG PFX "CIS: "); - for (i = 0; i < 16; i++) { - printk("%02X:", ioread8(card->attr_io + (i << 1))); - } - printk("\n"); - - /* Verify whether a supported PC card is present */ - /* FIXME: we probably need to be smarted about this */ - for (i = 0; i < sizeof(cis_magic); i++) { - if (cis_magic[i] != ioread8(card->attr_io + (i << 1))) { - printk(KERN_ERR PFX "The CIS value of Prism2 PC " - "card is unexpected\n"); - return -ENODEV; - } - } - - /* bjoern: We need to tell the card to enable interrupts, in - case the serial eprom didn't do this already. See the - PLX9052 data book, p8-1 and 8-24 for reference. */ - csr_reg = ioread32(card->bridge_io + PLX_INTCSR); - if (!(csr_reg & PLX_INTCSR_INTEN)) { - csr_reg |= PLX_INTCSR_INTEN; - iowrite32(csr_reg, card->bridge_io + PLX_INTCSR); - csr_reg = ioread32(card->bridge_io + PLX_INTCSR); - if (!(csr_reg & PLX_INTCSR_INTEN)) { - printk(KERN_ERR PFX "Cannot enable interrupts\n"); - return -EIO; - } - } - - return 0; -} - -static int orinoco_plx_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int err; - struct orinoco_private *priv; - struct orinoco_pci_card *card; - struct net_device *dev; - void __iomem *hermes_io, *attr_io, *bridge_io; - - err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR PFX "Cannot enable PCI device\n"); - return err; - } - - err = pci_request_regions(pdev, DRIVER_NAME); - if (err) { - printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); - goto fail_resources; - } - - bridge_io = pci_iomap(pdev, 1, 0); - if (!bridge_io) { - printk(KERN_ERR PFX "Cannot map bridge registers\n"); - err = -EIO; - goto fail_map_bridge; - } - - attr_io = pci_iomap(pdev, 2, 0); - if (!attr_io) { - printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n"); - err = -EIO; - goto fail_map_attr; - } - - hermes_io = pci_iomap(pdev, 3, 0); - if (!hermes_io) { - printk(KERN_ERR PFX "Cannot map chipset registers\n"); - err = -EIO; - goto fail_map_hermes; - } - - /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), &pdev->dev, - orinoco_plx_cor_reset, NULL); - if (!dev) { - printk(KERN_ERR PFX "Cannot allocate network device\n"); - err = -ENOMEM; - goto fail_alloc; - } - - priv = netdev_priv(dev); - card = priv->card; - card->bridge_io = bridge_io; - card->attr_io = attr_io; - SET_NETDEV_DEV(dev, &pdev->dev); - - hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); - - err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - dev->name, dev); - if (err) { - printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); - err = -EBUSY; - goto fail_irq; - } - - err = orinoco_plx_hw_init(card); - if (err) { - printk(KERN_ERR PFX "Hardware initialization failed\n"); - goto fail; - } - - err = orinoco_plx_cor_reset(priv); - if (err) { - printk(KERN_ERR PFX "Initial reset failed\n"); - goto fail; - } - - err = register_netdev(dev); - if (err) { - printk(KERN_ERR PFX "Cannot register network device\n"); - goto fail; - } - - pci_set_drvdata(pdev, dev); - printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name, - pci_name(pdev)); - - return 0; - - fail: - free_irq(pdev->irq, dev); - - fail_irq: - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); - - fail_alloc: - pci_iounmap(pdev, hermes_io); - - fail_map_hermes: - pci_iounmap(pdev, attr_io); - - fail_map_attr: - pci_iounmap(pdev, bridge_io); - - fail_map_bridge: - pci_release_regions(pdev); - - fail_resources: - pci_disable_device(pdev); - - return err; -} - -static void __devexit orinoco_plx_remove_one(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct orinoco_private *priv = netdev_priv(dev); - struct orinoco_pci_card *card = priv->card; - - unregister_netdev(dev); - free_irq(pdev->irq, dev); - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); - pci_iounmap(pdev, priv->hw.iobase); - pci_iounmap(pdev, card->attr_io); - pci_iounmap(pdev, card->bridge_io); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -static struct pci_device_id orinoco_plx_id_table[] = { - {0x111a, 0x1023, PCI_ANY_ID, PCI_ANY_ID,}, /* Siemens SpeedStream SS1023 */ - {0x1385, 0x4100, PCI_ANY_ID, PCI_ANY_ID,}, /* Netgear MA301 */ - {0x15e8, 0x0130, PCI_ANY_ID, PCI_ANY_ID,}, /* Correga - does this work? */ - {0x1638, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* SMC EZConnect SMC2602W, - Eumitcom PCI WL11000, - Addtron AWA-100 */ - {0x16ab, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* Global Sun Tech GL24110P */ - {0x16ab, 0x1101, PCI_ANY_ID, PCI_ANY_ID,}, /* Reported working, but unknown */ - {0x16ab, 0x1102, PCI_ANY_ID, PCI_ANY_ID,}, /* Linksys WDT11 */ - {0x16ec, 0x3685, PCI_ANY_ID, PCI_ANY_ID,}, /* USR 2415 */ - {0xec80, 0xec00, PCI_ANY_ID, PCI_ANY_ID,}, /* Belkin F5D6000 tested by - Brendan W. McAdams */ - {0x10b7, 0x7770, PCI_ANY_ID, PCI_ANY_ID,}, /* 3Com AirConnect PCI tested by - Damien Persohn */ - {0,}, -}; - -MODULE_DEVICE_TABLE(pci, orinoco_plx_id_table); - -static struct pci_driver orinoco_plx_driver = { - .name = DRIVER_NAME, - .id_table = orinoco_plx_id_table, - .probe = orinoco_plx_init_one, - .remove = __devexit_p(orinoco_plx_remove_one), - .suspend = orinoco_pci_suspend, - .resume = orinoco_pci_resume, -}; - -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Pavel Roskin ," - " David Gibson ," - " Daniel Barlow )"; -MODULE_AUTHOR("Daniel Barlow "); -MODULE_DESCRIPTION("Driver for wireless LAN cards using the PLX9052 PCI bridge"); -MODULE_LICENSE("Dual MPL/GPL"); - -static int __init orinoco_plx_init(void) -{ - printk(KERN_DEBUG "%s\n", version); - return pci_register_driver(&orinoco_plx_driver); -} - -static void __exit orinoco_plx_exit(void) -{ - pci_unregister_driver(&orinoco_plx_driver); -} - -module_init(orinoco_plx_init); -module_exit(orinoco_plx_exit); - -/* - * Local variables: - * c-indent-level: 8 - * c-basic-offset: 8 - * tab-width: 8 - * End: - */ diff --git a/drivers/net/wireless/orinoco_tmd.c b/drivers/net/wireless/orinoco_tmd.c deleted file mode 100644 index ede24ec309c0..000000000000 --- a/drivers/net/wireless/orinoco_tmd.c +++ /dev/null @@ -1,248 +0,0 @@ -/* orinoco_tmd.c - * - * Driver for Prism II devices which would usually be driven by orinoco_cs, - * but are connected to the PCI bus by a TMD7160. - * - * Copyright (C) 2003 Joerg Dorchain - * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - * - * The actual driving is done by orinoco.c, this is just resource - * allocation stuff. - * - * This driver is modeled after the orinoco_plx driver. The main - * difference is that the TMD chip has only IO port ranges and doesn't - * provide access to the PCMCIA attribute space. - * - * Pheecom sells cards with the TMD chip as "ASIC version" - */ - -#define DRIVER_NAME "orinoco_tmd" -#define PFX DRIVER_NAME ": " - -#include -#include -#include -#include -#include -#include - -#include "orinoco.h" -#include "orinoco_pci.h" - -#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */ -#define COR_RESET (0x80) /* reset bit in the COR register */ -#define TMD_RESET_TIME (500) /* milliseconds */ - -/* - * Do a soft reset of the card using the Configuration Option Register - */ -static int orinoco_tmd_cor_reset(struct orinoco_private *priv) -{ - hermes_t *hw = &priv->hw; - struct orinoco_pci_card *card = priv->card; - unsigned long timeout; - u16 reg; - - iowrite8(COR_VALUE | COR_RESET, card->bridge_io); - mdelay(1); - - iowrite8(COR_VALUE, card->bridge_io); - mdelay(1); - - /* Just in case, wait more until the card is no longer busy */ - timeout = jiffies + (TMD_RESET_TIME * HZ / 1000); - reg = hermes_read_regn(hw, CMD); - while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { - mdelay(1); - reg = hermes_read_regn(hw, CMD); - } - - /* Still busy? */ - if (reg & HERMES_CMD_BUSY) { - printk(KERN_ERR PFX "Busy timeout\n"); - return -ETIMEDOUT; - } - - return 0; -} - - -static int orinoco_tmd_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int err; - struct orinoco_private *priv; - struct orinoco_pci_card *card; - struct net_device *dev; - void __iomem *hermes_io, *bridge_io; - - err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR PFX "Cannot enable PCI device\n"); - return err; - } - - err = pci_request_regions(pdev, DRIVER_NAME); - if (err) { - printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); - goto fail_resources; - } - - bridge_io = pci_iomap(pdev, 1, 0); - if (!bridge_io) { - printk(KERN_ERR PFX "Cannot map bridge registers\n"); - err = -EIO; - goto fail_map_bridge; - } - - hermes_io = pci_iomap(pdev, 2, 0); - if (!hermes_io) { - printk(KERN_ERR PFX "Cannot map chipset registers\n"); - err = -EIO; - goto fail_map_hermes; - } - - /* Allocate network device */ - dev = alloc_orinocodev(sizeof(*card), &pdev->dev, - orinoco_tmd_cor_reset, NULL); - if (!dev) { - printk(KERN_ERR PFX "Cannot allocate network device\n"); - err = -ENOMEM; - goto fail_alloc; - } - - priv = netdev_priv(dev); - card = priv->card; - card->bridge_io = bridge_io; - SET_NETDEV_DEV(dev, &pdev->dev); - - hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING); - - err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - dev->name, dev); - if (err) { - printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); - err = -EBUSY; - goto fail_irq; - } - - err = orinoco_tmd_cor_reset(priv); - if (err) { - printk(KERN_ERR PFX "Initial reset failed\n"); - goto fail; - } - - err = register_netdev(dev); - if (err) { - printk(KERN_ERR PFX "Cannot register network device\n"); - goto fail; - } - - pci_set_drvdata(pdev, dev); - printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name, - pci_name(pdev)); - - return 0; - - fail: - free_irq(pdev->irq, dev); - - fail_irq: - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); - - fail_alloc: - pci_iounmap(pdev, hermes_io); - - fail_map_hermes: - pci_iounmap(pdev, bridge_io); - - fail_map_bridge: - pci_release_regions(pdev); - - fail_resources: - pci_disable_device(pdev); - - return err; -} - -static void __devexit orinoco_tmd_remove_one(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct orinoco_private *priv = netdev_priv(dev); - struct orinoco_pci_card *card = priv->card; - - unregister_netdev(dev); - free_irq(pdev->irq, dev); - pci_set_drvdata(pdev, NULL); - free_orinocodev(dev); - pci_iounmap(pdev, priv->hw.iobase); - pci_iounmap(pdev, card->bridge_io); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -static struct pci_device_id orinoco_tmd_id_table[] = { - {0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,}, /* NDC and OEMs, e.g. pheecom */ - {0,}, -}; - -MODULE_DEVICE_TABLE(pci, orinoco_tmd_id_table); - -static struct pci_driver orinoco_tmd_driver = { - .name = DRIVER_NAME, - .id_table = orinoco_tmd_id_table, - .probe = orinoco_tmd_init_one, - .remove = __devexit_p(orinoco_tmd_remove_one), - .suspend = orinoco_pci_suspend, - .resume = orinoco_pci_resume, -}; - -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Joerg Dorchain )"; -MODULE_AUTHOR("Joerg Dorchain "); -MODULE_DESCRIPTION("Driver for wireless LAN cards using the TMD7160 PCI bridge"); -MODULE_LICENSE("Dual MPL/GPL"); - -static int __init orinoco_tmd_init(void) -{ - printk(KERN_DEBUG "%s\n", version); - return pci_register_driver(&orinoco_tmd_driver); -} - -static void __exit orinoco_tmd_exit(void) -{ - pci_unregister_driver(&orinoco_tmd_driver); -} - -module_init(orinoco_tmd_init); -module_exit(orinoco_tmd_exit); - -/* - * Local variables: - * c-indent-level: 8 - * c-basic-offset: 8 - * tab-width: 8 - * End: - */ diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c deleted file mode 100644 index 852789ad34b3..000000000000 --- a/drivers/net/wireless/spectrum_cs.c +++ /dev/null @@ -1,507 +0,0 @@ -/* - * Driver for 802.11b cards using RAM-loadable Symbol firmware, such as - * Symbol Wireless Networker LA4137, CompactFlash cards by Socket - * Communications and Intel PRO/Wireless 2011B. - * - * The driver implements Symbol firmware download. The rest is handled - * in hermes.c and orinoco.c. - * - * Utilities for downloading the Symbol firmware are available at - * http://sourceforge.net/projects/orinoco/ - * - * Copyright (C) 2002-2005 Pavel Roskin - * Portions based on orinoco_cs.c: - * Copyright (C) David Gibson, Linuxcare Australia - * Portions based on Spectrum24tDnld.c from original spectrum24 driver: - * Copyright (C) Symbol Technologies. - * - * See copyright notice in file orinoco.c. - */ - -#define DRIVER_NAME "spectrum_cs" -#define PFX DRIVER_NAME ": " - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "orinoco.h" - -/********************************************************************/ -/* Module stuff */ -/********************************************************************/ - -MODULE_AUTHOR("Pavel Roskin "); -MODULE_DESCRIPTION("Driver for Symbol Spectrum24 Trilogy cards with firmware downloader"); -MODULE_LICENSE("Dual MPL/GPL"); - -/* Module parameters */ - -/* Some D-Link cards have buggy CIS. They do work at 5v properly, but - * don't have any CIS entry for it. This workaround it... */ -static int ignore_cis_vcc; /* = 0 */ -module_param(ignore_cis_vcc, int, 0); -MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket"); - -/********************************************************************/ -/* Data structures */ -/********************************************************************/ - -/* PCMCIA specific device information (goes in the card field of - * struct orinoco_private */ -struct orinoco_pccard { - struct pcmcia_device *p_dev; - dev_node_t node; -}; - -/********************************************************************/ -/* Function prototypes */ -/********************************************************************/ - -static int spectrum_cs_config(struct pcmcia_device *link); -static void spectrum_cs_release(struct pcmcia_device *link); - -/* Constants for the CISREG_CCSR register */ -#define HCR_RUN 0x07 /* run firmware after reset */ -#define HCR_IDLE 0x0E /* don't run firmware after reset */ -#define HCR_MEM16 0x10 /* memory width bit, should be preserved */ - - -#define CS_CHECK(fn, ret) \ - do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - -/* - * Reset the card using configuration registers COR and CCSR. - * If IDLE is 1, stop the firmware, so that it can be safely rewritten. - */ -static int -spectrum_reset(struct pcmcia_device *link, int idle) -{ - int last_ret, last_fn; - conf_reg_t reg; - u_int save_cor; - - /* Doing it if hardware is gone is guaranteed crash */ - if (!pcmcia_dev_present(link)) - return -ENODEV; - - /* Save original COR value */ - reg.Function = 0; - reg.Action = CS_READ; - reg.Offset = CISREG_COR; - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); - save_cor = reg.Value; - - /* Soft-Reset card */ - reg.Action = CS_WRITE; - reg.Offset = CISREG_COR; - reg.Value = (save_cor | COR_SOFT_RESET); - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); - udelay(1000); - - /* Read CCSR */ - reg.Action = CS_READ; - reg.Offset = CISREG_CCSR; - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); - - /* - * Start or stop the firmware. Memory width bit should be - * preserved from the value we've just read. - */ - reg.Action = CS_WRITE; - reg.Offset = CISREG_CCSR; - reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16); - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); - udelay(1000); - - /* Restore original COR configuration index */ - reg.Action = CS_WRITE; - reg.Offset = CISREG_COR; - reg.Value = (save_cor & ~COR_SOFT_RESET); - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); - udelay(1000); - return 0; - - cs_failed: - cs_error(link, last_fn, last_ret); - return -ENODEV; -} - -/********************************************************************/ -/* Device methods */ -/********************************************************************/ - -static int -spectrum_cs_hard_reset(struct orinoco_private *priv) -{ - struct orinoco_pccard *card = priv->card; - struct pcmcia_device *link = card->p_dev; - - /* Soft reset using COR and HCR */ - spectrum_reset(link, 0); - - return 0; -} - -static int -spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) -{ - struct orinoco_pccard *card = priv->card; - struct pcmcia_device *link = card->p_dev; - - return spectrum_reset(link, idle); -} - -/********************************************************************/ -/* PCMCIA stuff */ -/********************************************************************/ - -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ -static int -spectrum_cs_probe(struct pcmcia_device *link) -{ - struct net_device *dev; - struct orinoco_private *priv; - struct orinoco_pccard *card; - - dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), - spectrum_cs_hard_reset, - spectrum_cs_stop_firmware); - if (! dev) - return -ENOMEM; - priv = netdev_priv(dev); - card = priv->card; - - /* Link both structures together */ - card->p_dev = link; - link->priv = dev; - - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; - link->irq.IRQInfo1 = IRQ_LEVEL_ID; - link->irq.Handler = orinoco_interrupt; - link->irq.Instance = dev; - - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - - return spectrum_cs_config(link); -} /* spectrum_cs_attach */ - -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ -static void spectrum_cs_detach(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - - if (link->dev_node) - unregister_netdev(dev); - - spectrum_cs_release(link); - - free_orinocodev(dev); -} /* spectrum_cs_detach */ - -/* - * spectrum_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - -static int spectrum_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) -{ - if (cfg->index == 0) - goto next_entry; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) - goto next_entry; - } - return 0; - -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; -}; - -static int -spectrum_cs_config(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); - struct orinoco_pccard *card = priv->card; - hermes_t *hw = &priv->hw; - int last_fn, last_ret; - void __iomem *mem; - - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ - last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); - if (last_ret) { - if (!ignore_cis_vcc) - printk(KERN_ERR PFX "GetNextTuple(): No matching " - "CIS configuration. Maybe you need the " - "ignore_cis_vcc=1 parameter.\n"); - cs_error(link, RequestIO, last_ret); - goto failed; - } - - /* - * Allocate an interrupt line. Note that this does not assign - * a handler to the interrupt, unless the 'Handler' member of - * the irq structure is initialized. - */ - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); - - /* We initialize the hermes structure before completing PCMCIA - * configuration just in case the interrupt handler gets - * called. */ - mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); - if (!mem) - goto cs_failed; - - hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); - - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - CS_CHECK(RequestConfiguration, - pcmcia_request_configuration(link, &link->conf)); - - /* Ok, we have the configuration, prepare to register the netdev */ - dev->base_addr = link->io.BasePort1; - dev->irq = link->irq.AssignedIRQ; - card->node.major = card->node.minor = 0; - - /* Reset card */ - if (spectrum_cs_hard_reset(priv) != 0) { - goto failed; - } - - SET_NETDEV_DEV(dev, &handle_to_dev(link)); - /* Tell the stack we exist */ - if (register_netdev(dev) != 0) { - printk(KERN_ERR PFX "register_netdev() failed\n"); - goto failed; - } - - /* At this point, the dev_node_t structure(s) needs to be - * initialized and arranged in a linked list at link->dev_node. */ - strcpy(card->node.dev_name, dev->name); - link->dev_node = &card->node; /* link->dev_node being non-NULL is also - used to indicate that the - net_device has been registered */ - - /* Finally, report what we've done */ - printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io " - "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id, - link->irq.AssignedIRQ, link->io.BasePort1, - link->io.BasePort1 + link->io.NumPorts1 - 1); - - return 0; - - cs_failed: - cs_error(link, last_fn, last_ret); - - failed: - spectrum_cs_release(link); - return -ENODEV; -} /* spectrum_cs_config */ - -/* - * After a card is removed, spectrum_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ -static void -spectrum_cs_release(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - - /* We're committed to taking the device away now, so mark the - * hardware as unavailable */ - spin_lock_irqsave(&priv->lock, flags); - priv->hw_unavailable++; - spin_unlock_irqrestore(&priv->lock, flags); - - pcmcia_disable_device(link); - if (priv->hw.iobase) - ioport_unmap(priv->hw.iobase); -} /* spectrum_cs_release */ - - -static int -spectrum_cs_suspend(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); - unsigned long flags; - int err = 0; - - /* Mark the device as stopped, to block IO until later */ - spin_lock_irqsave(&priv->lock, flags); - - err = __orinoco_down(dev); - if (err) - printk(KERN_WARNING "%s: Error %d downing interface\n", - dev->name, err); - - netif_device_detach(dev); - priv->hw_unavailable++; - - spin_unlock_irqrestore(&priv->lock, flags); - - return err; -} - -static int -spectrum_cs_resume(struct pcmcia_device *link) -{ - struct net_device *dev = link->priv; - struct orinoco_private *priv = netdev_priv(dev); - - netif_device_attach(dev); - priv->hw_unavailable--; - schedule_work(&priv->reset_work); - - return 0; -} - - -/********************************************************************/ -/* Module initialization */ -/********************************************************************/ - -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Pavel Roskin ," - " David Gibson , et al)"; - -static struct pcmcia_device_id spectrum_cs_ids[] = { - PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */ - PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */ - PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */ - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids); - -static struct pcmcia_driver orinoco_driver = { - .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, - .probe = spectrum_cs_probe, - .remove = spectrum_cs_detach, - .suspend = spectrum_cs_suspend, - .resume = spectrum_cs_resume, - .id_table = spectrum_cs_ids, -}; - -static int __init -init_spectrum_cs(void) -{ - printk(KERN_DEBUG "%s\n", version); - - return pcmcia_register_driver(&orinoco_driver); -} - -static void __exit -exit_spectrum_cs(void) -{ - pcmcia_unregister_driver(&orinoco_driver); -} - -module_init(init_spectrum_cs); -module_exit(exit_spectrum_cs);