From: Sven Roederer Date: Mon, 22 Jun 2020 21:05:51 +0000 (+0200) Subject: ath79: add support for MikroTik RouterBOARD 921GS-5HPacD-15s X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b2e1f7101d877ce09f8bcb1732b20168051116b6;p=openwrt%2Fstaging%2Fnbd.git ath79: add support for MikroTik RouterBOARD 921GS-5HPacD-15s The MikroTik RouterBOARD 921GS-5HPacD-15s (mANTBox 15s) is an outdoor antenna for 5 GHz with an built-in router. This ports the board from ar71xx. See https://mikrotik.com/product/RB921GS-5HPacD-15S for more info. Specifications: - SoC: Qualcomm Atheros QCA9558 (720 MHz) - RAM: 128 MB - Storage: 128 MB NAND - Wireless: external QCA9892 802.11a/ac 2x2:2 - Ethernet: 1x 1000/100/10 Mbps, integrated, via AR8031 PHY, passive PoE in - SFP: 1x host Working: - NAND storage detection - Ethernet - Wireless - 1x user LED (blinks during boot, sysupgrade) - Reset button - Sysupgrade Untested: - SFP cage (probably not working) Installation (untested): - Boot initramfs image via TFTP and then flash sysupgrade image As the embedded RB921-pcb is a stripped down version of the RB922 this patch adds a common dtsi for this series and includes this to the final dts-files. Signed-off-by: Sven Roederer [move ath10k-leds closer to ath10k definition in DTS files] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-921gs-5hpacd-15s.dts b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-921gs-5hpacd-15s.dts new file mode 100644 index 0000000000..8cd0fa750f --- /dev/null +++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-921gs-5hpacd-15s.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9558_mikrotik_routerboard-92x.dtsi" + +/ { + compatible = "mikrotik,routerboard-921gs-5hpacd-15s", "qca,qca9558"; + model = "MikroTik RouterBOARD 921GS-5HPacD-15s"; + + ath10k-leds { + compatible = "gpio-leds"; + + wlan5g { + label = "mikrotik:green:wlan5g"; + gpios = <&ath10k 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; +}; + +&pcie1 { + status = "okay"; + + ath10k: wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0 0 0 0 0>; + #gpio-cells = <2>; + gpio-controller; + }; +}; diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts index a3f42f87bf..92a1772e20 100644 --- a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts +++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-922uags-5hpacd.dts @@ -1,31 +1,12 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; -#include -#include - -#include "qca955x.dtsi" +#include "qca9558_mikrotik_routerboard-92x.dtsi" / { compatible = "mikrotik,routerboard-922uags-5hpacd", "qca,qca9558"; model = "MikroTik RouterBOARD 922UAGS-5HPacD"; - aliases { - led-boot = &led_user; - led-failsafe = &led_user; - led-upgrade = &led_user; - serial0 = &uart; - }; - - leds { - compatible = "gpio-leds"; - - led_user: user { - label = "mikrotik:green:user"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - }; - }; - ath10k-leds { compatible = "gpio-leds"; @@ -36,120 +17,15 @@ }; }; - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - linux,code = ; - gpios = <&gpio 20 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; - gpio-export { - compatible = "gpio-export"; - gpio_usb_power { gpio-export,name = "mikrotik:power:usb"; gpio-export,output = <0>; gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; }; - - gpio_nand_power { - gpio-export,name = "mikrotik:power:nand"; - gpio-export,output = <0>; - gpios = <&gpio 23 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&mdio0 { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - }; -}; - -ð0 { - status = "okay"; - - phy-handle = <&phy4>; - pll-data = <0x8f000000 0xa0000101 0xa0001313>; - - gmac-config { - device = <&gmac>; - rgmii-enabled = <1>; }; }; -&spi { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "mikrotik,routerboot-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "routerboot"; - reg = <0x0 0x0>; - read-only; - }; - - hard_config: hard_config { - read-only; - }; - - bios { - read-only; - }; - - soft_config { - }; - }; - }; -}; - -&nand { - status = "okay"; - - nand-ecc-mode = "soft"; - qca,nand-swap-dma; - qca,nand-scan-fixup; - - partitions { - compatible = "fixed-partitions"; - #size-cells = <1>; - - partition@0 { - label = "booter"; - reg = <0x0000000 0x0040000>; - read-only; - }; - - partition@40000 { - label = "kernel"; - reg = <0x0040000 0x03c0000>; - }; - - partition@400000 { - label = "ubi"; - reg = <0x0400000 0x7c00000>; - }; - }; -}; - -&uart { - status = "okay"; -}; - &pcie0 { status = "okay"; diff --git a/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi new file mode 100644 index 0000000000..c48f997e89 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_mikrotik_routerboard-92x.dtsi @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include + +#include "qca955x.dtsi" + +/ { + aliases { + led-boot = &led_user; + led-failsafe = &led_user; + led-upgrade = &led_user; + serial0 = &uart; + }; + + leds { + compatible = "gpio-leds"; + + led_user: user { + label = "mikrotik:green:user"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + gpio_nand_power { + gpio-export,name = "mikrotik:power:nand"; + gpio-export,output = <0>; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&phy4>; + pll-data = <0x8f000000 0xa0000101 0xa0001313>; + + gmac-config { + device = <&gmac>; + rgmii-enabled = <1>; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "mikrotik,routerboot-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "routerboot"; + reg = <0x0 0x0>; + read-only; + }; + + hard_config: hard_config { + read-only; + }; + + bios { + read-only; + }; + + soft_config { + }; + }; + }; +}; + +&nand { + status = "okay"; + + nand-ecc-mode = "soft"; + qca,nand-swap-dma; + qca,nand-scan-fixup; + + partitions { + compatible = "fixed-partitions"; + #size-cells = <1>; + + partition@0 { + label = "booter"; + reg = <0x0000000 0x0040000>; + read-only; + }; + + partition@40000 { + label = "kernel"; + reg = <0x0040000 0x03c0000>; + }; + + partition@400000 { + label = "ubi"; + reg = <0x0400000 0x7c00000>; + }; + }; +}; + +&uart { + status = "okay"; +}; diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk index 1d4a1390ef..6066d8a147 100644 --- a/target/linux/ath79/image/mikrotik.mk +++ b/target/linux/ath79/image/mikrotik.mk @@ -9,6 +9,15 @@ define Device/mikrotik_routerboard-493g endef TARGET_DEVICES += mikrotik_routerboard-493g +define Device/mikrotik_routerboard-921gs-5hpacd-15s + $(Device/mikrotik_nand) + SOC := qca9558 + DEVICE_MODEL := RouterBOARD 921GS-5HPacD-15s (mANTBox 15s) + DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct + SUPPORTED_DEVICES += rb-921gs-5hpacd-r2 +endef +TARGET_DEVICES += mikrotik_routerboard-921gs-5hpacd-15s + define Device/mikrotik_routerboard-922uags-5hpacd $(Device/mikrotik_nand) SOC := qca9558 diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network index c6384378ca..f0799a0b8c 100755 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network @@ -15,6 +15,7 @@ ath79_setup_interfaces() ucidef_add_switch "switch1" \ "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" ;; + mikrotik,routerboard-921gs-5hpacd-15s|\ mikrotik,routerboard-922uags-5hpacd|\ mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-wap-g-5hact2hnd) @@ -35,6 +36,7 @@ ath79_setup_macs() local mac_base="$(cat /sys/firmware/mikrotik/hard_config/mac_base)" case "$board" in + mikrotik,routerboard-921gs-5hpacd-15s|\ mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-wap-g-5hact2hnd) label_mac="$mac_base" diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 531c21678f..31d4eeedbc 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -11,6 +11,7 @@ board=$(board_name) case "$FIRMWARE" in "ath10k/cal-pci-0000:00:00.0.bin") case $board in + mikrotik,routerboard-921gs-5hpacd-15s|\ mikrotik,routerboard-wap-g-5hact2hnd) caldata_sysfsload_from_file $wlan_data 0x5000 0x844 ;; diff --git a/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh index 8d11cfc0ce..3297b0abaf 100644 --- a/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh @@ -32,6 +32,7 @@ platform_do_upgrade() { case "$board" in mikrotik,routerboard-493g|\ + mikrotik,routerboard-921gs-5hpacd-15s|\ mikrotik,routerboard-922uags-5hpacd) platform_do_upgrade_mikrotik_nand "$1" ;;