From: Roger Quadros Date: Thu, 3 Oct 2013 15:12:37 +0000 (+0300) Subject: ARM: dts: omap5: update omap-control-usb node X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b297c292900a78ca624d3bc30a7580565ae11def;p=openwrt%2Fstaging%2Fblogic.git ARM: dts: omap5: update omap-control-usb node Split USB2 PHY and USB3 PHY into separate omap-control-usb nodes. Get rid of "ti,type" property. CC: Benoit Cousson Signed-off-by: Roger Quadros Signed-off-by: Greg Kroah-Hartman --- diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 7cdea1bfea09..c0ec6dce30fe 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -626,12 +626,16 @@ hw-caps-temp-alert; }; - omap_control_usb: omap-control-usb@4a002300 { - compatible = "ti,omap-control-usb"; - reg = <0x4a002300 0x4>, - <0x4a002370 0x4>; - reg-names = "control_dev_conf", "phy_power_usb"; - ti,type = <2>; + omap_control_usb2phy: control-phy@4a002300 { + compatible = "ti,control-phy-usb2"; + reg = <0x4a002300 0x4>; + reg-names = "power"; + }; + + omap_control_usb3phy: control-phy@4a002370 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002370 0x4>; + reg-names = "power"; }; omap_dwc3@4a020000 { @@ -662,7 +666,7 @@ usb2_phy: usb2phy@4a084000 { compatible = "ti,omap-usb2"; reg = <0x4a084000 0x7c>; - ctrl-module = <&omap_control_usb>; + ctrl-module = <&omap_control_usb2phy>; }; usb3_phy: usb3phy@4a084400 { @@ -671,7 +675,7 @@ <0x4a084800 0x64>, <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_usb>; + ctrl-module = <&omap_control_usb3phy>; }; };