From: Pavel Kubelun Date: Wed, 2 Nov 2016 19:42:55 +0000 (+0300) Subject: ipq806x: update DT in accordance to new drivers And add some more DT nodes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b2135f3ba5f0ce3bac39620bcdfd46a0225727b5;p=openwrt%2Fstaging%2Fwigyori.git ipq806x: update DT in accordance to new drivers And add some more DT nodes Signed-off-by: Pavel Kubelun --- diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi index 42281c4d54..cae5fdc3b3 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi @@ -7,18 +7,19 @@ #include #include #include +#include #include / { model = "Qualcomm IPQ8065"; - compatible = "qcom,ipq8065"; + compatible = "qcom,ipq8065", "qcom,ipq8064"; interrupt-parent = <&intc>; cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -26,82 +27,18 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; - clocks = <&kraitcc 0>; - clock-names = "cpu"; + clocks = <&kraitcc 0>, <&kraitcc 4>; + clock-names = "cpu", "l2"; qcom,imem = <&imem>; clock-latency = <100000>; - core-supply = <&smb208_s2a>; + cpu-supply = <&smb208_s2a>; voltage-tolerance = <5>; cooling-min-state = <0>; cooling-max-state = <10>; #cooling-cells = <2>; - - operating-points-0-0 = < - /* kHz uV */ - 1725000 1262500 - 1400000 1175000 - 1000000 1100000 - 800000 1050000 - 600000 1000000 - 384000 975000 - >; - operating-points-0-1 = < - /* kHz uV */ - 1725000 1262500 - 1400000 1175000 - 1000000 1100000 - 800000 1050000 - 600000 1000000 - 384000 950000 - >; - operating-points-0-2 = < - /* kHz uV */ - 1725000 1200000 - 1400000 1125000 - 1000000 1050000 - 800000 1000000 - 600000 950000 - 384000 925000 - >; - operating-points-0-3 = < - /* kHz uV */ - 1725000 1175000 - 1400000 1100000 - 1000000 1025000 - 800000 975000 - 600000 925000 - 384000 900000 - >; - operating-points-0-4 = < - /* kHz uV */ - 1725000 1150000 - 1400000 1075000 - 1000000 1000000 - 800000 950000 - 600000 900000 - 384000 875000 - >; - operating-points-0-5 = < - /* kHz uV */ - 1725000 1100000 - 1400000 1025000 - 1000000 950000 - 800000 900000 - 600000 850000 - 384000 825000 - >; - operating-points-0-6 = < - /* kHz uV */ - 1725000 1050000 - 1400000 975000 - 1000000 900000 - 800000 850000 - 600000 800000 - 384000 775000 - >; }; - cpu@1 { + cpu1: cpu@1 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -109,92 +46,24 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; - clocks = <&kraitcc 1>; - clock-names = "cpu"; + clocks = <&kraitcc 1>, <&kraitcc 4>; + clock-names = "cpu", "l2"; qcom,imem = <&imem>; clock-latency = <100000>; - core-supply = <&smb208_s2b>; + cpu-supply = <&smb208_s2b>; cooling-min-state = <0>; cooling-max-state = <10>; #cooling-cells = <2>; - - operating-points-0-0 = < - /* kHz uV */ - 1725000 1262500 - 1400000 1175000 - 1000000 1100000 - 800000 1050000 - 600000 1000000 - 384000 975000 - >; - operating-points-0-1 = < - /* kHz uV */ - 1725000 1262500 - 1400000 1175000 - 1000000 1100000 - 800000 1050000 - 600000 1000000 - 384000 950000 - >; - operating-points-0-2 = < - /* kHz uV */ - 1725000 1200000 - 1400000 1125000 - 1000000 1050000 - 800000 1000000 - 600000 950000 - 384000 925000 - >; - operating-points-0-3 = < - /* kHz uV */ - 1725000 1175000 - 1400000 1100000 - 1000000 1025000 - 800000 975000 - 600000 925000 - 384000 900000 - >; - operating-points-0-4 = < - /* kHz uV */ - 1725000 1150000 - 1400000 1075000 - 1000000 1000000 - 800000 950000 - 600000 900000 - 384000 875000 - >; - operating-points-0-5 = < - /* kHz uV */ - 1725000 1100000 - 1400000 1025000 - 1000000 950000 - 800000 900000 - 600000 850000 - 384000 825000 - >; - operating-points-0-6 = < - /* kHz uV */ - 1725000 1050000 - 1400000 975000 - 1000000 900000 - 800000 850000 - 600000 800000 - 384000 775000 - >; }; L2: l2-cache { compatible = "cache"; cache-level = <2>; - clocks = <&kraitcc 4>; - clock-names = "cache"; - cache-points-kHz = < - /* kHz uV CPU kHz */ - 1200000 1150000 1200000 - 1000000 1100000 600000 - 384000 1100000 384000 - >; - vdd_dig-supply = <&smb208_s1a>; + qcom,saw = <&saw_l2>; + }; + + qcom,l2 { + qcom,l2-rates = <384000000 1000000000 1200000000>; }; }; @@ -357,48 +226,6 @@ qcom,switch-mode-frequency = <1200000>; }; }; - - rpm_clocks { - #clock-cells = <0>; - compatible = "qcom,rpm-clk"; - qcom,rpm-clk-active-only; - - cxo_clk: cxo { - reg = ; - qcom,rpm-clk-name = "cxo"; - qcom,rpm-clk-freq = <25000000>; - }; - - pxo_clk: pxo { - reg = ; - qcom,rpm-clk-name = "pxo"; - qcom,rpm-clk-freq = <25000000>; - }; - - ebi1_clk: ebi1 { - reg = ; - qcom,rpm-clk-name = "ebi1"; - qcom,rpm-clk-freq = <533000000>; - }; - - apps_fabric_clk: apps-fabric { - reg = ; - qcom,rpm-clk-name = "apps-fabric"; - qcom,rpm-clk-freq = <533000000>; - }; - - nss_fabric0_clk: nss-fabric0 { - reg = ; - qcom,rpm-clk-name = "nss-fabric0"; - qcom,rpm-clk-freq = <533000000>; - }; - - nss_fabric1_clk: nss-fabric1 { - reg = ; - qcom,rpm-clk-name = "nss-fabric1"; - qcom,rpm-clk-freq = <266000000>; - }; - }; }; rng@1a500000 { @@ -511,17 +338,28 @@ }; saw0: regulator@2089000 { - compatible = "qcom,saw2"; + compatible = "qcom,saw2", "syscon"; reg = <0x02089000 0x1000>, <0x02009000 0x1000>; regulator; }; saw1: regulator@2099000 { - compatible = "qcom,saw2"; + compatible = "qcom,saw2", "syscon"; reg = <0x02099000 0x1000>, <0x02009000 0x1000>; regulator; }; + saw_l2: regulator@02012000 { + compatible = "qcom,saw2", "syscon"; + reg = <0x02012000 0x1000>; + regulator; + }; + + sic_non_secure: sic-non-secure@12100000 { + compatible = "syscon"; + reg = <0x12100000 0x10000>; + }; + gsbi1: gsbi@12440000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <1>; @@ -817,6 +655,7 @@ reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; }; lcc: clock-controller@28000000 { @@ -1103,7 +942,7 @@ adm_dma: dma@18300000 { compatible = "qcom,adm"; reg = <0x18300000 0x100000>; - interrupts = <0 170 0>; + interrupts = ; #dma-cells = <1>; clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; @@ -1221,6 +1060,7 @@ status = "disabled"; }; + /* Temporary fixed regulator */ vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; @@ -1294,7 +1134,6 @@ #dma-names = "tx", "rx"; }; }; - }; sfpb_mutex: sfpb-mutex { diff --git a/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch b/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch index aaf140126c..6ca3c62e4e 100644 --- a/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch +++ b/target/linux/ipq806x/patches-4.4/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch @@ -4,40 +4,36 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; -+ clocks = <&kraitcc 0>; -+ clock-names = "cpu"; ++ clocks = <&kraitcc 0>, <&kraitcc 4>; ++ clock-names = "cpu", "l2"; + clock-latency = <100000>; -+ core-supply = <&smb208_s2a>; ++ cpu-supply = <&smb208_s2a>; + voltage-tolerance = <5>; }; cpu@1 { -@@ -36,11 +41,24 @@ +@@ -36,12 +41,20 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; -+ clocks = <&kraitcc 1>; -+ clock-names = "cpu"; ++ clocks = <&kraitcc 1>, <&kraitcc 4>; ++ clock-names = "cpu", "l2"; + clock-latency = <100000>; -+ core-supply = <&smb208_s2b>; ++ cpu-supply = <&smb208_s2b>; }; L2: l2-cache { compatible = "cache"; cache-level = <2>; -+ clocks = <&kraitcc 4>; -+ clock-names = "cache"; -+ cache-points-kHz = < -+ /* kHz uV CPU kHz */ -+ 1200000 1150000 1200000 -+ 1000000 1100000 600000 -+ 384000 1100000 384000 -+ >; -+ vdd_dig-supply = <&smb208_s1a>; }; ++ ++ qcom,l2 { ++ qcom,l2-rates = <384000000 1000000000 1200000000>; ++ }; }; -@@ -73,6 +91,46 @@ + cpu-pmu { +@@ -73,6 +86,46 @@ }; }; @@ -84,7 +80,7 @@ soc: soc { #address-cells = <1>; #size-cells = <1>; -@@ -215,11 +273,13 @@ +@@ -215,11 +268,13 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; diff --git a/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch b/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch index b8abd0a4b2..5fc2a3da55 100644 --- a/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch +++ b/target/linux/ipq806x/patches-4.4/157-ARM-DT-ipq8064-Add-ADM-device-node.patch @@ -13,7 +13,7 @@ Signed-off-by: Andy Gross --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -727,6 +727,26 @@ +@@ -722,6 +722,26 @@ status = "disabled"; }; diff --git a/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch b/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch index 4fc8a8ce90..bd8c7e752c 100644 --- a/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch +++ b/target/linux/ipq806x/patches-4.4/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch @@ -26,7 +26,7 @@ arch/arm/boot/dts/qcom-ipq8064.dtsi | 15 +++++++++++++++ --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -747,6 +747,22 @@ +@@ -742,6 +742,22 @@ status = "disabled"; }; diff --git a/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch b/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch index a3a0583f29..1a15a8c645 100644 --- a/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch +++ b/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch @@ -4,7 +4,7 @@ Signed-off-by: Adrian Panella --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -167,45 +167,37 @@ +@@ -162,45 +162,37 @@ #address-cells = <1>; #size-cells = <0>; diff --git a/target/linux/ipq806x/patches-4.4/176-add-saw_l2-into-ipq8064-DT.patch b/target/linux/ipq806x/patches-4.4/176-add-saw_l2-into-ipq8064-DT.patch new file mode 100644 index 0000000000..d4f6c68a74 --- /dev/null +++ b/target/linux/ipq806x/patches-4.4/176-add-saw_l2-into-ipq8064-DT.patch @@ -0,0 +1,41 @@ +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -50,6 +50,7 @@ + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; ++ qcom,saw = <&saw_l2>; + }; + + qcom,l2 { +@@ -276,17 +277,28 @@ + }; + + saw0: regulator@2089000 { +- compatible = "qcom,saw2"; ++ compatible = "qcom,saw2", "syscon"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw1: regulator@2099000 { +- compatible = "qcom,saw2"; ++ compatible = "qcom,saw2", "syscon"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + ++ saw_l2: regulator@02012000 { ++ compatible = "qcom,saw2", "syscon"; ++ reg = <0x02012000 0x1000>; ++ regulator; ++ }; ++ ++ sic_non_secure: sic-non-secure@12100000 { ++ compatible = "syscon"; ++ reg = <0x12100000 0x10000>; ++ }; ++ + gsbi2: gsbi@12480000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; diff --git a/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch index d85d8b02aa..dcdec66603 100644 --- a/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch +++ b/target/linux/ipq806x/patches-4.4/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch @@ -121,7 +121,7 @@ Signed-off-by: Mathieu Olivari }; --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -755,6 +755,92 @@ +@@ -762,6 +762,92 @@ status = "disabled"; };