From: Grazvydas Ignotas Date: Mon, 19 Mar 2012 03:50:53 +0000 (+0000) Subject: mmc: omap: follow TRM procedure to power on cards X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b1e725f2c6e2d8f9855a0b4cba508a2abe748b4d;p=project%2Fbcm63xx%2Fu-boot.git mmc: omap: follow TRM procedure to power on cards According to OMAP3 TRM, PBIASLITEPWRDNZ bits must be cleared while MMC power supply is being enabled and is ramping up (those bits might be left set by the previous bootloader). It doesn't say what happens if this procedure is violated, but better not to risk here and do things as required. Signed-off-by: Grazvydas Ignotas Acked-by: Tom Rini --- diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 2400db2f35..2b12929576 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -62,15 +62,21 @@ static void omap4_vmmc_pbias_config(struct mmc *mmc) unsigned char mmc_board_init(struct mmc *mmc) { -#if defined(CONFIG_TWL4030_POWER) - twl4030_power_mmc_init(); -#endif - #if defined(CONFIG_OMAP34XX) t2_t *t2_base = (t2_t *)T2_BASE; struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + u32 pbias_lite; - writel(readl(&t2_base->pbias_lite) | PBIASLITEPWRDNZ1 | + pbias_lite = readl(&t2_base->pbias_lite); + pbias_lite &= ~(PBIASLITEPWRDNZ1 | PBIASLITEPWRDNZ0); + writel(pbias_lite, &t2_base->pbias_lite); +#endif +#if defined(CONFIG_TWL4030_POWER) + twl4030_power_mmc_init(); + mdelay(100); /* ramp-up delay from Linux code */ +#endif +#if defined(CONFIG_OMAP34XX) + writel(pbias_lite | PBIASLITEPWRDNZ1 | PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0, &t2_base->pbias_lite);