From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 3 Aug 2013 17:09:39 +0000 (+0000)
Subject: broadcom-diag: add gpio config for Linksys E4200v1
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b1b3067a12e87858b06d779d49b5fe16c6edd588;p=openwrt%2Fstaging%2Fthess.git

broadcom-diag: add gpio config for Linksys E4200v1

GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37666
---

diff --git a/package/kernel/broadcom-diag/src/diag.c b/package/kernel/broadcom-diag/src/diag.c
index 58d6755389..e2c26c889f 100644
--- a/package/kernel/broadcom-diag/src/diag.c
+++ b/package/kernel/broadcom-diag/src/diag.c
@@ -91,6 +91,7 @@ enum {
 	E1000V1,
 	E3000V1,
 	E3200V1,
+	E4200V1,
 
 	/* ASUS */
 	WLHDD,
@@ -496,6 +497,16 @@ static struct platform_t __initdata platforms[] = {
 			{ .name = "power",	.gpio = 1 << 3, .polarity = REVERSE },	/* Power LED */
 		},
 	},
+	[E4200V1] = {
+		.name		= "Linksys E4200 V1",
+		.buttons	= {
+			{ .name = "reset",	.gpio = 1 << 6 },
+			{ .name = "wps",	.gpio = 1 << 4 },
+		},
+		.leds	= {
+			{ .name = "power",	.gpio = 1 << 5, .polarity = REVERSE },
+		},
+	},
 	/* Asus */
 	[WLHDD] = {
 		.name		= "ASUS WL-HDD",
@@ -1348,6 +1359,8 @@ static struct platform_t __init *platform_detect(void)
 		return &platforms[E3000V1];
 	case BCM47XX_BOARD_LINKSYS_E3200V1:
 		return &platforms[E3200V1];
+	case BCM47XX_BOARD_LINKSYS_E4200V1:
+		return &platforms[E4200V1];
 	case BCM47XX_BOARD_LINKSYS_WRT150NV1:
 		return &platforms[WRT150NV1];
 	case BCM47XX_BOARD_LINKSYS_WRT150NV11: