From: Thibaut VARENE Date: Tue, 7 Feb 2017 14:23:30 +0000 (+0100) Subject: ar71xx: provide support for RB-941-2nD via mach-rbspi.c X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b18bae37a4f26949f71f1345caa2b6934f6a4663;p=openwrt%2Fstaging%2Fkaloz.git ar71xx: provide support for RB-941-2nD via mach-rbspi.c This patch implements support for the hAP lite in mach-rbspi.c hAP lite was supported via mach-rb941.c, so this file is removed as well as the corresponding build bits. Signed-off-by: Thibaut VARENE --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 5aa49c98f5..1d692fff3a 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -223,7 +223,7 @@ rb-750) ucidef_set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02" ;; rb-941-2nd) - ucidef_set_led_timer "act" "act" "rb:green:act" "1000" "1000" + ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000" ;; rb-2011l|\ rb-2011uas|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index f9d394ba34..527e8b749e 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -298,10 +298,11 @@ get_status_led() { rb-911g-5hpnd|\ rb-912uag-2hpnd|\ rb-912uag-5hpnd|\ + rb-941-2nd|\ rb-mapl-2nd) status_led="rb:green:user" ;; - rb-951ui-2hnd | rb-941-2nd) + rb-951ui-2hnd) status_led="rb:green:act" ;; rb-sxt2n|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 060931a8dd..b9f80a5398 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -147,7 +147,6 @@ CONFIG_ATH79_MACH_R6100=y # CONFIG_ATH79_MACH_RB750 is not set # CONFIG_ATH79_MACH_RB91X is not set # CONFIG_ATH79_MACH_RB922 is not set -# CONFIG_ATH79_MACH_RB941 is not set # CONFIG_ATH79_MACH_RB95X is not set # CONFIG_ATH79_MACH_RBSPI is not set # CONFIG_ATH79_MACH_RBSXTLITE is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 3474cb8f16..9bca451002 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -895,16 +895,6 @@ config ATH79_MACH_RB922 select ATH79_ROUTERBOOT select RLE_DECOMPRESS -config ATH79_MACH_RB941 - bool "MikroTik RouterBOARD 941-2nd support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_ROUTERBOOT - config ATH79_MACH_RB95X bool "MikroTik RouterBOARD 95X support" select SOC_AR934X @@ -936,6 +926,7 @@ config ATH79_MACH_RBSPI help Say 'Y' here if you want your kernel to support the MikroTik RouterBOARD mAP lite + MikroTik RouterBOARD hAP lite config ATH79_MACH_RBSXTLITE bool "MikroTik RouterBOARD SXT Lite" diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb941.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb941.c deleted file mode 100644 index 5da950bb88..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb941.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * MikroTik RouterBOARD 941-2nD support - * - * Copyright (C) 2016 Sergey Sergeev - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -//#include -#include - -#include -#include -#include - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-spi.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -//#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "routerboot.h" - -#define RB941_GPIO_LED_ACT 14 -#define RB941_GPIO_BTN_RESET 16 - -#define RB941_KEYS_POLL_INTERVAL 20 /* msecs */ -#define RB941_KEYS_DEBOUNCE_INTERVAL (3 * RB941_KEYS_POLL_INTERVAL) - -#define RB_ROUTERBOOT_OFFSET 0x0000 -#define RB_ROUTERBOOT_SIZE 0xe000 -#define RB_HARD_CFG_OFFSET 0xe000 -#define RB_HARD_CFG_SIZE 0x1000 -#define RB_BIOS_OFFSET 0xf000 -#define RB_BIOS_SIZE 0x1000 -#define RB_ROUTERBOOT2_OFFSET 0x10000 -#define RB_ROUTERBOOT2_SIZE 0xf000 -#define RB_SOFT_CFG_OFFSET 0x1f000 -#define RB_SOFT_CFG_SIZE 0x1000 -#define RB_ROOTFS_OFFSET 0x20000 -#define RB_ROOTFS_SIZE 0x9e0000 -#define RB_KERNEL_OFFSET 0xa00000 -#define RB_KERNEL_SIZE MTDPART_SIZ_FULL - -void __init rb941_wlan_init(void) -{ - char *art_buf; - u8 wlan_mac[ETH_ALEN]; - - art_buf = rb_get_wlan_data(); - if (art_buf == NULL) - return; - - ath79_init_mac(wlan_mac, ath79_mac_base, 11); - ath79_register_wmac(art_buf + 0x1000, wlan_mac); - - kfree(art_buf); -} - -static struct mtd_partition rb941_spi_partitions[] = { - { - .name = "routerboot", - .offset = RB_ROUTERBOOT_OFFSET, - .mask_flags = MTD_WRITEABLE, - .size = RB_ROUTERBOOT_SIZE, - }, { - .name = "hard_config", - .offset = RB_HARD_CFG_OFFSET, - .size = RB_HARD_CFG_SIZE, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "bios", - .offset = RB_BIOS_OFFSET, - .size = RB_BIOS_SIZE, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "routerboot2", - .offset = RB_ROUTERBOOT2_OFFSET, - .size = RB_ROUTERBOOT2_SIZE, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "soft_config", - .offset = RB_SOFT_CFG_OFFSET, - .size = RB_SOFT_CFG_SIZE, - }, { - .name = "rootfs", - .offset = RB_ROOTFS_OFFSET, - .size = RB_ROOTFS_SIZE, - }, { - .name = "kernel", - .offset = RB_KERNEL_OFFSET, - .size = RB_KERNEL_SIZE, - } -}; - -static struct flash_platform_data rb941_spi_flash_data = { - .parts = rb941_spi_partitions, - .nr_parts = ARRAY_SIZE(rb941_spi_partitions), -}; - -static struct gpio_led rb941_leds[] __initdata = { - { - .name = "rb:green:act", - .gpio = RB941_GPIO_LED_ACT, - .active_low = 1, - }, -}; - -static struct gpio_keys_button rb941_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RB941_KEYS_DEBOUNCE_INTERVAL, - .gpio = RB941_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init rb941_setup(void) -{ - const struct rb_info *info; - //try to get rb_info data - info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x20000); - if (!info){ - pr_err("%s: Can't get rb_info data from flash!\n", __func__); - //return -EINVAL; //Not critical ... continue! - } - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - ath79_register_m25p80(&rb941_spi_flash_data); - ath79_register_mdio(0, 0x0); - - /* WAN. We have no WAN. Only LAN. */ - /*ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_register_eth(0); */ - - /* LAN */ - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); - - //ath79_register_usb(); - - rb941_wlan_init(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rb941_leds), rb941_leds); - ath79_register_gpio_keys_polled(-1, RB941_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rb941_gpio_keys), - rb941_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_RB_941, "H951L", "MikroTik RouterBOARD 941-2nD", rb941_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c index 3f154b4775..541865220c 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c @@ -2,6 +2,7 @@ * MikroTik SPI-NOR RouterBOARDs support * * - MikroTik RouterBOARD mAP L-2nD + * - MikroTik RouterBOARD 941L-2nD * * Copyright (C) 2017 Thibaut VARENE * @@ -155,6 +156,16 @@ static struct gpio_led rbmapl_leds[] __initdata = { }, }; +/* RB 941L-2nD gpios */ +#define RBHAPL_GPIO_LED_USER 14 +static struct gpio_led rbhapl_leds[] __initdata = { + { + .name = "rb:green:user", + .gpio = RBHAPL_GPIO_LED_USER, + .active_low = 1, + }, +}; + void __init rbspi_wlan_init(int wmac_offset) { char *art_buf; @@ -276,4 +287,32 @@ static void __init rbmapl_setup(void) ath79_gpio_output_select(RBMAPL_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO); } +/* + * Init the hAP lite hardware. + * The 941-2nD (hAP lite) has 4 ethernet ports, with port 2-4 + * being assigned to LAN on the casing, and port 1 being assigned + * to "internet" (WAN) on the casing. Port 1 is connected to PHY3. + * Since WAN is neither PHY0 nor PHY4, we cannot use GMAC0 with this device. + */ +static void __init rbhapl_setup(void) +{ + u32 flags = RBSPI_HAS_WLAN; + + if (rbspi_platform_setup()) + return; + + rbspi_peripherals_setup(flags); + + /* GMAC1 is HW MAC, WLAN MAC is HW MAC + 4 */ + rbspi_network_setup(flags, 0, 4); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(rbhapl_leds), rbhapl_leds); + + /* hAP lite has a single reset button as gpio 16 */ + ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rbspi_gpio_keys_reset16), + rbspi_gpio_keys_reset16); +} + MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup); +MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup); diff --git a/target/linux/ar71xx/image/mikrotik.mk b/target/linux/ar71xx/image/mikrotik.mk index bcfa768dd7..c7cf15d061 100644 --- a/target/linux/ar71xx/image/mikrotik.mk +++ b/target/linux/ar71xx/image/mikrotik.mk @@ -37,10 +37,4 @@ define Device/rb-nor-flash-16M IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE) endef -define Device/rb-941-2nd -$(Device/rb-nor-flash-16M) - DEVICE_TITLE := hAP lite - BOARDNAME:= rb-941-2nd -endef - -TARGET_DEVICES += rb-nor-flash-16M rb-941-2nd +TARGET_DEVICES += rb-nor-flash-16M diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index a8af0e721e..62ff5a52dd 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -112,7 +112,6 @@ CONFIG_ATH79_MACH_RB4XX=y CONFIG_ATH79_MACH_RB750=y CONFIG_ATH79_MACH_RB91X=y CONFIG_ATH79_MACH_RB922=y -CONFIG_ATH79_MACH_RB941=y CONFIG_ATH79_MACH_RB95X=y CONFIG_ATH79_MACH_RBSPI=y CONFIG_ATH79_MACH_RBSXTLITE=y