From: Kristian Evensen Date: Thu, 2 Mar 2017 12:44:02 +0000 (+0100) Subject: ramips: Improve Sanlinking D240 config X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b11c51916cb9b9d12faea3ab9e00c05fceca4a42;p=openwrt%2Fstaging%2Fmans0n.git ramips: Improve Sanlinking D240 config * The left most mini-PCIe slot (the one attached to SIM2) can be power-cycled by setting GPIO 0 to high/low. * The D240 only needs the MT76x2 module, so update makefile to reflect this. Note that until the default mt7620 target is updated, then kmod-mt76 (and thus kmod-mt7603) will be selected by default. v2->v3: * Indentation error. v1->v2: * Rename gpio and remove redundant comment (thanks Piotr Dymacz) Signed-off-by: Kristian Evensen --- diff --git a/target/linux/ramips/dts/D240.dts b/target/linux/ramips/dts/D240.dts index ef45d38e61..46d014126d 100644 --- a/target/linux/ramips/dts/D240.dts +++ b/target/linux/ramips/dts/D240.dts @@ -46,6 +46,17 @@ bootargs = "console=ttyS0,115200"; }; + gpio-export { + compatible = "gpio-export"; + #size-cells = <0>; + + power_mpcie2 { + gpio-export,name = "power_mpcie2"; + gpio-export,output = ; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; + gpio-leds { compatible = "gpio-leds"; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index ece1539714..3ecd4ba3a1 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -471,6 +471,6 @@ define Device/d240 DTS := D240 IMAGE_SIZE := $(ralink_default_fw_size_16M) DEVICE_TITLE := Sanlinking Technologies D240 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76-core kmod-mt76x2 kmod-sdhci-mt7620 endef TARGET_DEVICES += d240