From: Hans de Goede Date: Sun, 16 Nov 2014 10:33:56 +0000 (+0100) Subject: sun6i: Add new CSQ_CS908 board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b0f25b6f51ecbc6bdbbd399eedbe56ba4ac7b219;p=project%2Fbcm63xx%2Fu-boot.git sun6i: Add new CSQ_CS908 board The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND, rtl8188etv usb wifi, 2 USB A receptacles (1 connected through the OTG controller), ethernet, 3.5 mm jack with a/v out and hdmi out: http://www.geekbuying.com/item/CS908-Allwinner-A31S-Quad-Core-1-2GHz-Android-4-4-Mini-TV-Box-HDMI-HDD-Player-1G-8G-WIFI-Miracast---Black-333395.html Note it has no sdcard slot and therefore can only be fel booted. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index ca0300272e..013d485135 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -9,7 +9,6 @@ F: configs/Cubieboard_defconfig F: configs/Mele_A1000_defconfig F: configs/Mele_A1000G_defconfig F: configs/Mele_M3_defconfig -F: configs/Mele_M9_defconfig F: configs/Mini-X_defconfig F: configs/Mini-X-1Gb_defconfig F: include/configs/sun5i.h @@ -18,6 +17,9 @@ F: configs/A13-OLinuXino_defconfig F: configs/A13-OLinuXinoM_defconfig F: configs/Auxtek-T004_defconfig F: configs/r7-tv-dongle_defconfig +F: include/configs/sun6i.h +F: configs/CSQ_CS908_defconfig +F: configs/Mele_M9_defconfig F: include/configs/sun7i.h F: configs/A20-OLinuXino_MICRO_defconfig F: configs/Bananapi_defconfig diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig new file mode 100644 index 0000000000..4c9cff6e92 --- /dev/null +++ b/configs/CSQ_CS908_defconfig @@ -0,0 +1,19 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_FDTFILE="sun6i-a31s-cs908.dtb" ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN6I=y ++S:CONFIG_TARGET_CSQ_CS908=y ++S:CONFIG_DRAM_CLK=432 ++S:CONFIG_DRAM_ZQ=123 +# Ethernet phy power ++S:CONFIG_AXP221_DLDO1_VOLT=3300 +# Wifi power ++S:CONFIG_AXP221_ALDO1_VOLT=3300 +# HDMI power ? ++S:CONFIG_AXP221_ALDO2_VOLT=1800 ++S:CONFIG_AXP221_ALDO3_VOLT=3000 +# No Vbus gpio for either usb ++S:CONFIG_USB1_VBUS_PIN="" ++S:CONFIG_USB2_VBUS_PIN=""