From: Luka Perkov <luka@openwrt.org>
Date: Tue, 10 Nov 2015 00:16:42 +0000 (+0000)
Subject: kirkwood: support sysupgrade on Linksys EA[34]500
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b0e7ca4f8f6c85b0382ec54f85cc208f89ec3947;p=openwrt%2Fstaging%2Fneocturne.git

kirkwood: support sysupgrade on Linksys EA[34]500

This automatically writes to the alternate firmware partition
(on Linksys's dual firmware layout) using code borrowed from
the WRT1900AC port.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47434
---

diff --git a/target/linux/kirkwood/base-files/lib/upgrade/linksys.sh b/target/linux/kirkwood/base-files/lib/upgrade/linksys.sh
new file mode 100644
index 0000000000..13a8f1cb55
--- /dev/null
+++ b/target/linux/kirkwood/base-files/lib/upgrade/linksys.sh
@@ -0,0 +1,79 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+
+linksys_get_target_firmware() {
+	cur_boot_part=`/usr/sbin/fw_printenv -n boot_part`
+	target_firmware=""
+	if [ "$cur_boot_part" = "1" ]
+	then
+		# current primary boot - update alt boot
+		target_firmware="kernel2"
+		fw_setenv boot_part 2
+		fw_setenv bootcmd "run altnandboot"
+	elif [ "$cur_boot_part" = "2" ]
+	then
+		# current alt boot - update primary boot
+		target_firmware="kernel1"
+		fw_setenv boot_part 1
+		fw_setenv bootcmd "run nandboot"
+	fi
+
+	echo "$target_firmware"
+}
+
+linksys_get_root_magic() {
+	(get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
+}
+
+platform_do_upgrade_linksys() {
+	local magic_long="$(get_magic_long "$1")"
+
+	mkdir -p /var/lock
+	local part_label="$(linksys_get_target_firmware)"
+	touch /var/lock/fw_printenv.lock
+
+	if [ ! -n "$part_label" ]
+	then
+		echo "cannot find target partition"
+		exit 1
+	fi
+
+	local target_mtd=$(find_mtd_part $part_label)
+
+	[ "$magic_long" = "73797375" ] && {
+		CI_KERNPART="$part_label"
+		if [ "$part_label" = "kernel1" ]
+		then
+			CI_UBIPART="rootfs1"
+		else
+			CI_UBIPART="rootfs2"
+		fi
+
+		nand_upgrade_tar "$1"
+	}
+	[ "$magic_long" = "27051956" ] && {
+		# check firmwares' rootfs types
+		local target_mtd=$(find_mtd_part $part_label)
+		local oldroot="$(linksys_get_root_magic $target_mtd)"
+		local newroot="$(linksys_get_root_magic "$1")"
+
+		if [ "$newroot" = "55424923" -a "$oldroot" = "55424923" ]
+		# we're upgrading from a firmware with UBI to one with UBI
+		then
+			# erase everything to be safe
+			mtd erase $part_label
+			get_image "$1" | mtd -n write - $part_label
+		else
+			get_image "$1" | mtd write - $part_label
+		fi
+	}
+}
+
+linksys_preupgrade() {
+	export RAMFS_COPY_BIN="${RAMFS_COPY_BIN} /usr/sbin/fw_printenv /usr/sbin/fw_setenv"
+	export RAMFS_COPY_BIN="${RAMFS_COPY_BIN} /bin/mkdir /bin/touch"
+	export RAMFS_COPY_DATA="${RAMFS_COPY_DATA} /etc/fw_env.config /var/lock/fw_printenv.lock"
+}
+
+append sysupgrade_pre_upgrade linksys_preupgrade
diff --git a/target/linux/kirkwood/base-files/lib/upgrade/platform.sh b/target/linux/kirkwood/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000000..c33229a41b
--- /dev/null
+++ b/target/linux/kirkwood/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,32 @@
+. /lib/kirkwood.sh
+
+platform_check_image() {
+	[ "$#" -gt 1 ] && return 1
+	local board="$(kirkwood_board_name)"
+	local magic="$(get_magic_long "$1")"
+
+	case "$board" in
+	"linksys-audi"|\
+	"linksys-viper")
+		[ "$magic" != "27051956" -a "$magic" != "73797375" ] && {
+			echo "Invalid image type."
+			return 1
+		}
+		return 0
+		;;
+	esac
+
+	echo "Sysupgrade is not yet supported on $board."
+	return 1
+}
+
+platform_do_upgrade() {
+	local board="$(kirkwood_board_name)"
+
+	case "$board" in
+	"linksys-audi"|\
+	"linksys-viper")
+		platform_do_upgrade_linksys "$ARGV"
+		;;
+	esac
+}