From: Luka Perkov Date: Fri, 6 Mar 2015 14:41:57 +0000 (+0000) Subject: ar71xx: add support for compex wpj558 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b065411a85c10d6be7f5cdb80026ad43c6303013;p=openwrt%2Fstaging%2Fstintel.git ar71xx: add support for compex wpj558 OpenWrt can be flashed with following uboot commands: tftpboot 0x80500000 openwrt-ar71xx-generic-wpj558-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Luka Perkov SVN-Revision: 44620 --- diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 3cbf7fbd5e..56f956072f 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -293,6 +293,9 @@ get_status_led() { wp543) status_led="wp543:green:diag" ;; + wpj558) + status_led="wpj558:green:sig3" + ;; wrt400n) status_led="wrt400n:blue:wps" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index fdefb5abef..20f34d50da 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -359,6 +359,13 @@ wpe72) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; +wpj558) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "5 6t" + ucidef_add_switch_vlan "switch0" "2" "1 6t" + ;; + ap121 |\ ap121-mini |\ ap96 |\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 52acc6b39e..d5be238ec9 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -771,6 +771,9 @@ ar71xx_board_detect() { *WPE72) name="wpe72" ;; + *WPJ558) + name="wpj558" + ;; *WNDAP360) name="wndap360" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 15fcf8915f..4353efd60c 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -180,10 +180,11 @@ platform_check_image() { ap136-020 | \ ap135-020 | \ ap96 | \ + bxu2000n-2-a1 | \ db120 | \ f9k1115v2 |\ hornet-ub | \ - bxu2000n-2-a1 | \ + wpj558 | \ zcn-1523h-2 | \ zcn-1523h-5) [ "$magic_long" != "68737173" -a "$magic_long" != "19852003" ] && { diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18 index fa287e2cee..f881a292f0 100644 --- a/target/linux/ar71xx/config-3.18 +++ b/target/linux/ar71xx/config-3.18 @@ -132,6 +132,7 @@ CONFIG_ATH79_MACH_WNR2000_V4=y CONFIG_ATH79_MACH_WNR2200=y CONFIG_ATH79_MACH_WP543=y CONFIG_ATH79_MACH_WPE72=y +CONFIG_ATH79_MACH_WPJ558=y CONFIG_ATH79_MACH_WRT160NL=y CONFIG_ATH79_MACH_WRT400N=y CONFIG_ATH79_MACH_WZR_450HP2=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj558.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj558.c new file mode 100644 index 0000000000..7c5509c964 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj558.c @@ -0,0 +1,174 @@ +/* + * Compex WPJ558 board support + * + * Copyright (c) 2012 Qualcomm Atheros + * Copyright (c) 2012-2013 Gabor Juhos + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "common.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-eth.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define WPJ558_GPIO_LED_SIG1 14 +#define WPJ558_GPIO_LED_SIG2 15 +#define WPJ558_GPIO_LED_SIG3 22 +#define WPJ558_GPIO_LED_SIG4 23 +#define WPJ558_GPIO_BUZZER 4 + +#define WPJ558_GPIO_BTN_RESET 17 + +#define WPJ558_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WPJ558_KEYS_DEBOUNCE_INTERVAL (3 * WPJ558_KEYS_POLL_INTERVAL) + +#define WPJ558_MAC_OFFSET 0x1002 +#define WPJ558_WMAC_CALDATA_OFFSET 0x1000 + +static struct gpio_led wpj558_leds_gpio[] __initdata = { + { + .name = "wpj558:red:sig1", + .gpio = WPJ558_GPIO_LED_SIG1, + .active_low = 1, + }, + { + .name = "wpj558:yellow:sig2", + .gpio = WPJ558_GPIO_LED_SIG2, + .active_low = 1, + }, + { + .name = "wpj558:green:sig3", + .gpio = WPJ558_GPIO_LED_SIG3, + .active_low = 1, + }, + { + .name = "wpj558:green:sig4", + .gpio = WPJ558_GPIO_LED_SIG4, + .active_low = 1, + }, + { + .name = "wpj558:buzzer", + .gpio = WPJ558_GPIO_BUZZER, + .active_low = 0, + } +}; + +static struct gpio_keys_button wpj558_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WPJ558_KEYS_DEBOUNCE_INTERVAL, + .gpio = WPJ558_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static struct ar8327_pad_cfg wpj558_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_SGMII, + .sgmii_delay_en = true, +}; + +static struct ar8327_pad_cfg wpj558_ar8327_pad6_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_platform_data wpj558_ar8327_data = { + .pad0_cfg = &wpj558_ar8327_pad0_cfg, + .pad6_cfg = &wpj558_ar8327_pad6_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .port6_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + +static struct mdio_board_info wpj558_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &wpj558_ar8327_data, + }, +}; + +static void __init wpj558_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj558_leds_gpio), + wpj558_leds_gpio); + ath79_register_gpio_keys_polled(-1, WPJ558_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wpj558_gpio_keys), + wpj558_gpio_keys); + + ath79_register_wmac(art + WPJ558_WMAC_CALDATA_OFFSET, NULL); + + ath79_register_pci(); + + mdiobus_register_board_info(wpj558_mdio0_info, + ARRAY_SIZE(wpj558_mdio0_info)); + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, art + WPJ558_MAC_OFFSET, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, art + WPJ558_MAC_OFFSET, 0); + + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); + + /* GMAC0 is connected to an AR8327 switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x56000000; + + /* GMAC1 is connected to the SGMII interface */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_eth1_pll_data.pll_1000 = 0x03000101; + + ath79_register_eth(0); + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_WPJ558, "WPJ558", "Compex WPJ558", wpj558_setup); diff --git a/target/linux/ar71xx/generic/profiles/compex.mk b/target/linux/ar71xx/generic/profiles/compex.mk index 3491473810..d1a4f12e5e 100644 --- a/target/linux/ar71xx/generic/profiles/compex.mk +++ b/target/linux/ar71xx/generic/profiles/compex.mk @@ -26,3 +26,13 @@ define Profile/WPE72/Description endef $(eval $(call Profile,WPE72)) + +define Profile/WPJ558 + NAME:=Compex WPJ558 +endef + +define Profile/WPJ558/Description + Package set optimized for the Compex WPJ558 board. +endef + +$(eval $(call Profile,WPJ558)) diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index caab40412f..b4b75a1034 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -398,6 +398,7 @@ uap_pro_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel) ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware) +wpj558_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware) wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro @@ -1269,6 +1270,7 @@ $(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH $(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage)) $(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536)) $(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage)) +$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536)) $(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC)) @@ -1504,6 +1506,7 @@ $(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R)) $(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC)) $(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M)) $(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M)) +$(eval $(call MultiProfile,WPJ558,WPJ558_16M)) $(eval $(call MultiProfile,Minimal,$(SINGLE_PROFILES))) $(eval $(call MultiProfile,Madwifi,EAP7660D UBNTRS UBNTRSPRO UBNTLSSR71 WP543)) diff --git a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch index 6a0dfff37c..2c7e6635e9 100644 --- a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,22 +16,189 @@ +@@ -16,22 +16,190 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -178,6 +178,7 @@ + ATH79_MACH_WNR1000_V2, /* NETGEAR WNR1000 v2 */ + ATH79_MACH_WP543, /* Compex WP543 */ + ATH79_MACH_WPE72, /* Compex WPE72 */ ++ ATH79_MACH_WPJ558, /* Compex WPJ558 */ + ATH79_MACH_WRT160NL, /* Linksys WRT160NL */ + ATH79_MACH_WRT400N, /* Linksys WRT400N */ + ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ @@ -263,7 +264,7 @@ config ATH79_MACH_AP121 bool "Atheros AP121 reference board" select SOC_AR933X -@@ -11,62 +75,970 @@ config ATH79_MACH_AP121 +@@ -11,62 +75,979 @@ config ATH79_MACH_AP121 select ATH79_DEV_M25P80 select ATH79_DEV_USB select ATH79_DEV_WMAC @@ -498,6 +499,15 @@ + select ATH79_DEV_USB + select MYLOADER + ++config ATH79_MACH_WPJ558 ++ bool "Compex WPJ558 board support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ +config ATH79_MACH_DGL_5500_A1 + bool "D-Link DGL-5500 A1 support" + select SOC_QCA955X @@ -1382,7 +1392,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -38,9 +38,118 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route +@@ -38,9 +38,119 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route # # Machines # @@ -1491,6 +1501,7 @@ +obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o +obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o +obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o ++obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o +obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o +obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o