From: John Crispin Date: Mon, 6 Oct 2014 04:52:07 +0000 (+0000) Subject: ramips: Support for RAMIPS based Tripmate HT-TM02 board X-Git-Tag: reboot~5755 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b04bb3eea71338214ed83671f026e3e2625d23e8;p=openwrt%2Fstaging%2Fblogic.git ramips: Support for RAMIPS based Tripmate HT-TM02 board Provides support for the Tripmate HT-TM02 personal router including LEDs and reset button. “Mode” switch is not supported. New profile includes full set of packages required to enable LEDs, USB, and LUCI. Patches were applied against trunk snapshot r42649. Functionality has been tested in AP, basic wifi client, wifi router, and routed client modes - all good. Signed-off-by: Ron Curry SVN-Revision: 42785 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index bf646ed53b50..ecaaaff764af 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -112,6 +112,10 @@ case $board in hlk-rm04) set_wifi_led "rt2800pci-phy0::radio" ;; + ht-tm02) + ucidef_set_led_netdev "eth" "ETH" "ht-tm02:white:status" "eth0" + set_wifi_led "ht-tm02:blue:wifi" + ;; all0239-3g|\ hw550-3g) set_usb_led "hw550-3g:green:usb" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index e027b3be89fe..c462fd8142e1 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -97,6 +97,12 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "switch0" "2" "4 9t" ;; + ht-tm02) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "4 6t" + ;; + 3g-6200n | \ dir-610-a1 | \ dir-300-b7 | \ @@ -253,6 +259,7 @@ ramips_setup_macs() hlk-rm04 | \ mpr-a1 | \ mpr-a2 | \ + ht-tm02 | \ dir-300-b7 | \ dir-320-b1 | \ psr-680w |\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 9ad7ccbda104..9752eb22ecc0 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -63,6 +63,9 @@ get_status_led() { hlk-rm04) status_led="hlk-rm04:red:power" ;; + ht-tm02) + status_led="ht-tm02:white:status" + ;; all0239-3g|\ hw550-3g) status_led="hw550-3g:green:status" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index bb42ace621ee..68ff509a4efb 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -157,6 +157,9 @@ ramips_board_detect() { *"HILINK HLK-RM04") name="hlk-rm04" ;; + *"HOOTOO HT-TM02") + name="ht-tm02" + ;; *"HAME MPR-A1") name="mpr-a1" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 407c21838afc..4aec78099a45 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -52,6 +52,7 @@ platform_check_image() { hw550-3g | \ hg255d | \ hlk-rm04 | \ + ht-tm02 | \ ip2202 | \ m3 | \ m4 | \ diff --git a/target/linux/ramips/dts/HT-TM02.dts b/target/linux/ramips/dts/HT-TM02.dts new file mode 100644 index 000000000000..1f456f054685 --- /dev/null +++ b/target/linux/ramips/dts/HT-TM02.dts @@ -0,0 +1,104 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "HT-TM02", "ralink,rt5350-soc"; + model = "HOOTOO HT-TM02"; + + palmbus@10000000 { + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l6405d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + + esw@10110000 { + ralink,portmap = <0x3f>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + gpio-leds { + compatible = "gpio-leds"; + wifi { + label = "ht-tm02:blue:wifi"; + gpios = <&gpio0 7 1>; + }; + status { + label = "ht-tm02:yellow:status"; + gpios = <&gpio0 12 1>; + }; + + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 35057e49e486..c365d9dbb59e 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -434,6 +434,8 @@ define BuildFirmware/HLKRM04/initramfs endef Image/Build/Profile/HLKRM04=$(call BuildFirmware/HLKRM04/$(1),$(1),hlk-rm04,HLKRM04,HLK-RM02) +Image/Build/Profile/HT-TM02=$(call BuildFirmware/Default8M/$(1),$(1),ht-tm02,HT-TM02) + Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3) Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4) @@ -598,6 +600,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/FREESTATION5,$(1)) # $(call Image/Build/Profile/HG255D,$(1)) $(call Image/Build/Profile/HLKRM04,$(1)) + $(call Image/Build/Profile/HT-TM02,$(1)) $(call Image/Build/Profile/HW550-3G,$(1)) $(call Image/Build/Profile/IP2202,$(1)) $(call Image/Build/Profile/M3,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/hootoo.mk b/target/linux/ramips/rt305x/profiles/hootoo.mk new file mode 100644 index 000000000000..976226d5bdba --- /dev/null +++ b/target/linux/ramips/rt305x/profiles/hootoo.mk @@ -0,0 +1,28 @@ +# +# Copyright (C) 2013 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + + +define Profile/HT-TM02 + NAME:=HOOTOO HT-TM02 + PACKAGES:=\ + wpad-mini \ + kmod-ledtrig-netdev kmod-ledtrig-timer kmod-leds-gpio kmod-ledtrig-default-on \ + kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-net usbutils \ + kmod-scsi-core kmod-scsi-generic kmod-fs-ext4 \ + kmod-usb-storage kmod-usb-storage-extras block-mount \ + kmod-usb-serial kmod-usb-serial-ftdi kmod-gpio-button-hotplug \ + kmod-nls-cp437 kmod-nls-iso8859-1 kmod-nls-utf8 luci luci-mod-admin-full \ + kmod-app-samba luci-theme-openwrt luci-proto-relay relayd nano \ + fstools +endef + +define Profile/HT-TM02/Description + Package set for HOOTOO HT-TM02 board +endef + +$(eval $(call Profile,HT-TM02)) +