From: Hauke Mehrtens Date: Sun, 28 Apr 2013 17:57:30 +0000 (+0000) Subject: mac80211: b43: only use gpio 0 and 1 for the wifi led X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=b014140c2e15d428aa2e014553e32e1b9d9196fe;p=openwrt%2Fstaging%2F981213.git mac80211: b43: only use gpio 0 and 1 for the wifi led sometimes b43 truned the gpio for the switch reset on. SVN-Revision: 36476 --- diff --git a/package/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch b/package/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch new file mode 100644 index 0000000000..35d774492e --- /dev/null +++ b/package/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch @@ -0,0 +1,17 @@ +--- a/drivers/net/wireless/b43/main.c ++++ b/drivers/net/wireless/b43/main.c +@@ -2757,6 +2757,14 @@ static int b43_gpio_init(struct b43_wlde + } else if (dev->dev->chip_id == 0x5354) { + /* Don't allow overtaking buttons GPIOs */ + set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */ ++ } else if (dev->dev->chip_id == BCMA_CHIP_ID_BCM4716 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM47162 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM5356 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM5357 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM53572) { ++ /* just use gpio 0 and 1 for 2.4 GHz wifi led */ ++ set &= 0x3; ++ mask &= 0x3; + } + + if (0 /* FIXME: conditional unknown */ ) {