From: Gabor Juhos Date: Mon, 14 Jul 2014 21:30:26 +0000 (+0000) Subject: ar71xx: add kernel support for the EnGenius EAP300 v2 board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=aff3127956867287b978077c7199bb9d328f0c9c;p=openwrt%2Fstaging%2Fdedeckeh.git ar71xx: add kernel support for the EnGenius EAP300 v2 board Signed-off-by: Gabor Juhos SVN-Revision: 41658 --- diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10 index 63201e2df4..49676a77e7 100644 --- a/target/linux/ar71xx/config-3.10 +++ b/target/linux/ar71xx/config-3.10 @@ -46,6 +46,7 @@ CONFIG_ATH79_MACH_DIR_615_C1=y CONFIG_ATH79_MACH_DIR_825_B1=y CONFIG_ATH79_MACH_DIR_825_C1=y CONFIG_ATH79_MACH_DRAGINO2=y +CONFIG_ATH79_MACH_EAP300V2=y CONFIG_ATH79_MACH_EAP7660D=y CONFIG_ATH79_MACH_EL_M150=y CONFIG_ATH79_MACH_EL_MINI=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap300v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-eap300v2.c new file mode 100644 index 0000000000..ba577e2517 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-eap300v2.c @@ -0,0 +1,101 @@ +/* + * EnGenius EAP300 v2 board support + * + * Copyright (C) 2014 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define EAP300V2_GPIO_LED_POWER 0 +#define EAP300V2_GPIO_LED_LAN 16 +#define EAP300V2_GPIO_LED_WLAN 17 + +#define EAP300V2_GPIO_BTN_RESET 1 + +#define EAP300V2_KEYS_POLL_INTERVAL 20 /* msecs */ +#define EAP300V2_KEYS_DEBOUNCE_INTERVAL (3 * EAP300V2_KEYS_POLL_INTERVAL) + +static struct gpio_led eap300v2_leds_gpio[] __initdata = { + { + .name = "engenius:blue:power", + .gpio = EAP300V2_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "engenius:blue:lan", + .gpio = EAP300V2_GPIO_LED_LAN, + .active_low = 1, + }, { + .name = "engenius:blue:wlan", + .gpio = EAP300V2_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button eap300v2_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = EAP300V2_KEYS_DEBOUNCE_INTERVAL, + .gpio = EAP300V2_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +#define EAP300V2_ART_MAC_OFFSET 2 + +#define EAP300V2_LAN_PHYMASK BIT(0) + +static void __init eap300v2_setup(void) +{ + u8 *art = (u8 *)KSEG1ADDR(0x1fff1000); + + ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); + + ath79_gpio_output_select(EAP300V2_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO); + ath79_gpio_output_select(EAP300V2_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO); + ath79_gpio_output_select(EAP300V2_GPIO_LED_WLAN, AR934X_GPIO_OUT_GPIO); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(eap300v2_leds_gpio), + eap300v2_leds_gpio); + ath79_register_gpio_keys_polled(-1, EAP300V2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(eap300v2_gpio_keys), + eap300v2_gpio_keys); + + ath79_register_m25p80(NULL); + ath79_register_wmac(art, NULL); + ath79_register_mdio(1, 0x0); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); + + ath79_init_mac(ath79_eth0_data.mac_addr, + art + EAP300V2_ART_MAC_OFFSET, 0); + + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = EAP300V2_LAN_PHYMASK; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = EAP300V2_LAN_PHYMASK; + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_EAP300V2, "EAP300V2", "EnGenius EAP300 v2", + eap300v2_setup); diff --git a/target/linux/ar71xx/patches-3.10/721-MIPS-ath79-add-EAP300v2-support.patch b/target/linux/ar71xx/patches-3.10/721-MIPS-ath79-add-EAP300v2-support.patch new file mode 100644 index 0000000000..0d396b7008 --- /dev/null +++ b/target/linux/ar71xx/patches-3.10/721-MIPS-ath79-add-EAP300v2-support.patch @@ -0,0 +1,38 @@ +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -50,6 +50,7 @@ enum ath79_mach_type { + ATH79_MACH_ESR900, /* EnGenius ESR900 */ + ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ + ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ ++ ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */ + ATH79_MACH_EAP7660D, /* Senao EAP7660D */ + ATH79_MACH_EL_M150, /* EasyLink EL-M150 */ + ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -396,6 +396,15 @@ config ATH79_MACH_GL_INET + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_EAP300V2 ++ bool "EnGenius EAP300 v2 support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_GS_OOLITE + bool "GS Oolite V1 support" + select SOC_AR933X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -62,6 +62,7 @@ obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += m + obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o + obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o + obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o ++obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o + obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o + obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o + obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o