From: INAGAKI Hiroshi Date: Wed, 27 Nov 2024 01:31:35 +0000 (+0900) Subject: Revert "ath79: elecom,wab: use nvmem" X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=af611bce44d3dcffd47c47f46b95400445498be9;p=openwrt%2Fopenwrt.git Revert "ath79: elecom,wab: use nvmem" This reverts commit 70e41d0205d95386881fa1cdf6ee00f6cca1b3f6. "ethaddr" is stored into the "u-boot-env" (stock: "Config") partition and it's quoted with double-quotations, but that format is not supported by the current NVMEM u-boot-env driver (and mac_pton() function) and the MAC address won't be parsed to byte array. This causes random MAC addresses on the adapters, so revert the above commit. Signed-off-by: INAGAKI Hiroshi Link: https://github.com/openwrt/openwrt/pull/17116 Signed-off-by: Robert Marko --- diff --git a/target/linux/ath79/dts/qca955x_elecom_wab.dtsi b/target/linux/ath79/dts/qca955x_elecom_wab.dtsi index 53bb5b0141..43e34c6029 100644 --- a/target/linux/ath79/dts/qca955x_elecom_wab.dtsi +++ b/target/linux/ath79/dts/qca955x_elecom_wab.dtsi @@ -8,7 +8,6 @@ / { aliases { - label-mac-device = ð0; led-boot = &led_status; led-failsafe = &led_status; led-upgrade = &led_status; @@ -108,9 +107,6 @@ phy-mode = "rgmii-rxid"; pll-data = <0xae000000 0x80000101 0x80001313>; - nvmem-cells = <&macaddr_uboot_ethaddr 0>; - nvmem-cell-names = "mac-address"; - gmac-config { device = <&gmac>; @@ -148,8 +144,8 @@ wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; - nvmem-cells = <&cal_art_5000>, <&macaddr_uboot_ethaddr 1>; - nvmem-cell-names = "calibration", "mac-address"; + nvmem-cells = <&cal_art_5000>; + nvmem-cell-names = "calibration"; }; }; @@ -173,14 +169,9 @@ }; partition@40000 { - compatible = "u-boot,env"; label = "u-boot-env"; reg = <0x40000 0x10000>; read-only; - - macaddr_uboot_ethaddr: ethaddr { - #nvmem-cell-cells = <1>; - }; }; partition@50000 { @@ -261,6 +252,6 @@ &wmac { status = "okay"; - nvmem-cells = <&cal_art_1000>, <&macaddr_uboot_ethaddr 0>; - nvmem-cell-names = "calibration", "mac-address"; + nvmem-cells = <&cal_art_1000>; + nvmem-cell-names = "calibration"; }; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 2bd97442d9..016bd6bb51 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -717,6 +717,9 @@ ath79_setup_macs() lan_mac=$(mtd_get_mac_ascii devdata "lanmac") wan_mac=$(mtd_get_mac_ascii devdata "wanmac") ;; + elecom,wab-i1750-ps|\ + elecom,wab-s1167-ps|\ + elecom,wab-s600-ps|\ engenius,ecb1200|\ engenius,ecb1750) lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 6676e4d509..5155d240a8 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -42,6 +42,16 @@ case "$board" in [ "$PHYNBR" -eq 1 ] && \ mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress ;; + elecom,wab-i1750-ps|\ + elecom,wab-s1167-ps|\ + elecom,wab-s600-ps) + # set the 5G MAC address (= ethaddr + 1) + [ "$PHYNBR" -eq 0 ] && \ + macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress + # set the 2.4G MAC address (= ethaddr) + [ "$PHYNBR" -eq 1 ] && \ + mtd_get_mac_ascii u-boot-env "ethaddr" > /sys${DEVPATH}/macaddress + ;; engenius,ecb1200|\ engenius,ecb1750) [ "$PHYNBR" -eq 0 ] && \