From: John Crispin Date: Mon, 17 Aug 2015 06:24:04 +0000 (+0000) Subject: ar71xx: add support for TP-Link TL-WDR6500 v2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=af60c367b7a16d80dba422b00fde2611a7c7d2ca;p=openwrt%2Fstaging%2Fstintel.git ar71xx: add support for TP-Link TL-WDR6500 v2 Signed-off-by: Weijie Gao This patch adds support for TP-Link TL-WDR6500 v2. The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for the whole firmware, so I have to create a new firmware creation method. SVN-Revision: 46663 --- diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index abb3f6221f..36de775df5 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -289,6 +289,9 @@ get_status_led() { tl-wr2543n) status_led="tp-link:green:wps" ;; + tl-wdr6500-v2) + status_led="tp-link:white:system" + ;; tube2h) status_led="alfa:green:signal4" ;; diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 7111630536..a79643e2ae 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -54,6 +54,10 @@ case "$FIRMWARE" in ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) ;; + tl-wdr6500-v2) + ath10kcal_extract "art" 20480 2116 + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) + ;; r6100) ath10kcal_extract "caldata" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) +2) diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index 392be3a8b2..e7f7a4cd62 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -443,6 +443,14 @@ tl-wdr4900-v2) ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy1tpt" ;; +tl-wdr6500-v2) + ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" + ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02" + ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04" + ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08" + ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10" + ;; + archer-c5|\ archer-c7) ucidef_set_led_usbdev "usb1" "USB1" "tp-link:green:usb1" "1-1" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index acaf03fc6c..686fce98b3 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -234,6 +234,7 @@ tl-mr3420-v2 |\ tl-wr841n-v8 |\ tl-wr842n-v2 |\ tl-wr941nd-v5 |\ +tl-wdr6500-v2 |\ wnr2000-v3 |\ wnr2000-v4 |\ wnr2200 |\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 359a5a61ee..e1f345eb93 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -240,6 +240,9 @@ tplink_board_detect() { "49000002") model="TP-Link TL-WDR4900" ;; + "65000002") + model="TP-Link TL-WDR6500" + ;; "453000"*) model="MERCURY MW4530R" ;; @@ -769,6 +772,9 @@ ar71xx_board_detect() { *"TL-WDR4900 v2") name="tl-wdr4900-v2" ;; + *"TL-WDR6500 v2") + name="tl-wdr6500-v2" + ;; *TL-WR741ND) name="tl-wr741nd" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index fb9add6877..c1962e4e9f 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -341,6 +341,7 @@ platform_check_image() { tl-wdr3500 | \ tl-wdr4300 | \ tl-wdr4900-v2 | \ + tl-wdr6500-v2 | \ tl-wr703n | \ tl-wr710n | \ tl-wr720n-v3 | \ @@ -358,7 +359,15 @@ platform_check_image() { tl-wr1043nd | \ tl-wr1043nd-v2 | \ tl-wr2543n) - [ "$magic" != "0100" ] && { + local magic_ver="0100" + + case "$board" in + tl-wdr6500-v2) + magic_ver="0200" + ;; + esac + + [ "$magic" != "$magic_ver" ] && { echo "Invalid image type." return 1 } diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1 index 1951cbb3d8..21c460178d 100644 --- a/target/linux/ar71xx/config-4.1 +++ b/target/linux/ar71xx/config-4.1 @@ -123,6 +123,7 @@ CONFIG_ATH79_MACH_TL_WA901ND_V2=y CONFIG_ATH79_MACH_TL_WAX50RE=y CONFIG_ATH79_MACH_TL_WDR3500=y CONFIG_ATH79_MACH_TL_WDR4300=y +CONFIG_ATH79_MACH_TL_WDR6500_V2=y CONFIG_ATH79_MACH_TL_WR1041N_V2=y CONFIG_ATH79_MACH_TL_WR1043ND=y CONFIG_ATH79_MACH_TL_WR1043ND_V2=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c new file mode 100644 index 0000000000..c2e75c278a --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c @@ -0,0 +1,141 @@ +/* + * TP-LINK TL-WDR6500 v2 + * + * Copyright (C) 2015 Weijie Gao + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +#define TL_WDR6500_V2_GPIO_LED_SYS 21 +#define TL_WDR6500_V2_GPIO_LED_WAN 18 +#define TL_WDR6500_V2_GPIO_LED_LAN1 17 +#define TL_WDR6500_V2_GPIO_LED_LAN2 16 +#define TL_WDR6500_V2_GPIO_LED_LAN3 15 +#define TL_WDR6500_V2_GPIO_LED_LAN4 14 + +#define TL_WDR6500_V2_GPIO_BTN_RESET 1 + +#define TL_WDR6500_V2_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WDR6500_V2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WDR6500_V2_KEYS_POLL_INTERVAL) + +#define TL_WDR6500_V2_WMAC_CALDATA_OFFSET 0x1000 +#define TL_WDR6500_V2_PCIE_CALDATA_OFFSET 0x5000 + +static const char *tl_wdr6500_v2_part_probes[] = { + "tp-link-64k", + NULL, +}; + +static struct flash_platform_data tl_wdr6500_v2_flash_data = { + .part_probes = tl_wdr6500_v2_part_probes, +}; + +static struct gpio_led tl_wdr6500_v2_leds_gpio[] __initdata = { + { + .name = "tp-link:green:lan1", + .gpio = TL_WDR6500_V2_GPIO_LED_LAN1, + .active_low = 1, + }, { + .name = "tp-link:green:lan2", + .gpio = TL_WDR6500_V2_GPIO_LED_LAN2, + .active_low = 1, + }, { + .name = "tp-link:green:lan3", + .gpio = TL_WDR6500_V2_GPIO_LED_LAN3, + .active_low = 1, + }, { + .name = "tp-link:green:lan4", + .gpio = TL_WDR6500_V2_GPIO_LED_LAN4, + .active_low = 1, + }, { + .name = "tp-link:green:wan", + .gpio = TL_WDR6500_V2_GPIO_LED_WAN, + .active_low = 1, + }, { + .name = "tp-link:white:system", + .gpio = TL_WDR6500_V2_GPIO_LED_SYS, + .active_low = 0, + }, +}; + +static struct gpio_keys_button tl_wdr6500_v2_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WDR6500_V2_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WDR6500_V2_GPIO_BTN_RESET, + .active_low = 1, + } +}; + + +static void __init tl_ap151_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff0000); + u8 tmpmac[ETH_ALEN]; + + ath79_register_m25p80(&tl_wdr6500_v2_flash_data); + + ath79_setup_ar933x_phy4_switch(false, false); + + ath79_register_mdio(0, 0x0); + + /* WAN */ + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = BIT(4); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(4); + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); + ath79_register_eth(0); + + /* LAN */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_eth1_data.speed = SPEED_1000; + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); + ath79_register_eth(1); + + ath79_init_mac(tmpmac, mac, -1); + ath79_register_wmac(ee + TL_WDR6500_V2_WMAC_CALDATA_OFFSET, tmpmac); + + ath79_register_pci(); + + ath79_register_usb(); +} + +static void __init tl_wdr6500_v2_setup(void) +{ + tl_ap151_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wdr6500_v2_leds_gpio), + tl_wdr6500_v2_leds_gpio); + + ath79_register_gpio_keys_polled(1, TL_WDR6500_V2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wdr6500_v2_gpio_keys), + tl_wdr6500_v2_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_TL_WDR6500_V2, "TL-WDR6500-v2", "TP-LINK TL-WDR6500 v2", + tl_wdr6500_v2_setup); diff --git a/target/linux/ar71xx/generic/profiles/tp-link.mk b/target/linux/ar71xx/generic/profiles/tp-link.mk index 0174a431b1..05d10196d3 100644 --- a/target/linux/ar71xx/generic/profiles/tp-link.mk +++ b/target/linux/ar71xx/generic/profiles/tp-link.mk @@ -277,6 +277,17 @@ endef $(eval $(call Profile,TLWDR4900V2)) +define Profile/TLWDR6500V2 + NAME:=TP-LINK TL-WDR6500v2 + PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev kmod-ath10k +endef + +define Profile/TLWDR6500V2/Description + Package set optimized for the TP-LINK TL-WDR6500v2. +endef +$(eval $(call Profile,TLWDR6500V2)) + + define Profile/TLWR740 NAME:=TP-LINK TL-WR740N/ND PACKAGES:= diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 3508913dfc..8f609de774 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -1745,6 +1745,37 @@ define Image/Build/TPLINK-LZMA/initramfs -o $(call imgname,$(1),$(2))-uImage.bin endef +Image/Build/TPLINK-64K/buildkernel=$(call PatchKernelLzma,$(2),$(3)) + +define Image/Build/TPLINK-64K + -$(STAGING_DIR_HOST)/bin/mkimage \ + -A mips -O linux -T kernel -a 0x80060000 -C lzma \ + -e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \ + -d $$(KDIR_TMP)/vmlinux-$(2).bin.lzma $(KDIR_TMP)/vmlinux-$(2).bin.lzma.img + -$(STAGING_DIR_HOST)/bin/mktplinkfw \ + -H $(4) -W $(5) -F $(6) -N OpenWrt -m 2 -V $(REVISION) $(7) \ + -X 0x20000 \ + -k $(KDIR_TMP)/vmlinux-$(2).bin.lzma.img \ + -r $(KDIR)/root.$(1) \ + -a $(call rootfs_align,$(1)) -j \ + -o $(call factoryname,$(1),$(2)) + -$(STAGING_DIR_HOST)/bin/mktplinkfw \ + -H $(4) -W $(5) -F $(6) -N OpenWrt -m 2 -V $(REVISION) $(7) -s \ + -X 0x20000 \ + -k $(KDIR_TMP)/vmlinux-$(2).bin.lzma.img \ + -r $(KDIR)/root.$(1) \ + -a $(call rootfs_align,$(1)) -j \ + -o $(call sysupname,$(1),$(2)) +endef + +define Image/Build/TPLINK-64K/initramfs + $(call PatchKernelLzma,$(2),$(3),,-initramfs) + -$(STAGING_DIR_HOST)/bin/mktplinkfw -c \ + -H $(4) -W $(5) -F $(6) -N OpenWrt -m 2 -V $(REVISION) $(7) -s \ + -k $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma.img \ + -o $(call imgname,$(1),$(2))-uImage.bin +endef + Image/Build/TPLINK-SAFELOADER/loader = $(call Image/BuildLoaderPatched,$(1),elf,$(2) $(3)) @@ -2173,6 +2204,8 @@ $(eval $(call SingleProfile,TPLINK,64kraw,TLWR1043V1,tl-wr1043nd-v1,TL-WR1043ND, $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR1043V2,tl-wr1043nd-v2,TL-WR1043ND-v2,ttyS0,115200,0x10430002,1,8M)) $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR2543,tl-wr2543-v1,TL-WR2543N,ttyS0,115200,0x25430001,1,8Mlzma,-v 3.13.99)) +$(eval $(call SingleProfile,TPLINK-64K,64kraw,TLWDR6500V2,tl-wdr6500-v2,TL-WDR6500-v2,ttyS0,115200,0x65000002,1,8Mlzma)) + $(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510)) $(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N)) diff --git a/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch b/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch new file mode 100644 index 0000000000..9ddb7407f3 --- /dev/null +++ b/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch @@ -0,0 +1,40 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -1043,6 +1043,17 @@ + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_TL_WDR6500_V2 ++ bool "TP-LINK TL-WDR6500 v2 board support" ++ select SOC_QCA956X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_TL_WR703N + bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support" + select SOC_AR933X +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -153,6 +153,7 @@ + ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */ + ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ + ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ ++ ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */ + ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */ + ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ + ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -129,6 +129,7 @@ + obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o + obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o + obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o ++obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2) += mach-tl-wdr6500-v2.o + obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o + obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o + obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o