From: Simon Budig Date: Tue, 10 Oct 2017 04:00:16 +0000 (-0700) Subject: Input: edt-ft5x06 - implement support for the EDT-M12 series X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=aed5d0ee77c007dcdcaf48ea75be008f05a241be;p=openwrt%2Fstaging%2Fblogic.git Input: edt-ft5x06 - implement support for the EDT-M12 series This adds support for the EDT M12 series of touchscreens. Signed-off-by: Simon Budig Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 56bfd0c14c91..c53a3d7239e7 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -72,6 +72,7 @@ enum edt_ver { EDT_M06, EDT_M09, + EDT_M12, GENERIC_FT, }; @@ -188,6 +189,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) break; case EDT_M09: + case EDT_M12: case GENERIC_FT: cmd = 0x0; offset = 3; @@ -211,7 +213,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) goto out; } - /* M09 does not send header or CRC */ + /* M09/M12 does not send header or CRC */ if (tsdata->version == EDT_M06) { if (rdbuf[0] != 0xaa || rdbuf[1] != 0xaa || rdbuf[2] != datalen) { @@ -274,6 +276,7 @@ static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata, return edt_ft5x06_ts_readwrite(tsdata->client, 4, wrbuf, 0, NULL); case EDT_M09: + case EDT_M12: case GENERIC_FT: wrbuf[0] = addr; wrbuf[1] = value; @@ -313,6 +316,7 @@ static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata, break; case EDT_M09: + case EDT_M12: case GENERIC_FT: wrbuf[0] = addr; error = edt_ft5x06_ts_readwrite(tsdata->client, 1, @@ -377,6 +381,7 @@ static ssize_t edt_ft5x06_setting_show(struct device *dev, break; case EDT_M09: + case EDT_M12: case GENERIC_FT: addr = attr->addr_m09; break; @@ -447,6 +452,7 @@ static ssize_t edt_ft5x06_setting_store(struct device *dev, break; case EDT_M09: + case EDT_M12: case GENERIC_FT: addr = attr->addr_m09; break; @@ -472,14 +478,18 @@ out: return error ?: count; } +/* m06, m09: range 0-31, m12: range 0-5 */ static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN, M09_REGISTER_GAIN, 0, 31); +/* m06, m09: range 0-31, m12: range 0-16 */ static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET, M09_REGISTER_OFFSET, 0, 31); +/* m06: range 20 to 80, m09: range 0 to 30, m12: range 1 to 255... */ static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD, - M09_REGISTER_THRESHOLD, 0, 80); + M09_REGISTER_THRESHOLD, 0, 255); +/* m06: range 3 to 14, m12: (0x64: 100Hz) */ static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE, - NO_REGISTER, 3, 14); + NO_REGISTER, 0, 255); static struct attribute *edt_ft5x06_attrs[] = { &edt_ft5x06_attr_gain.dattr.attr, @@ -551,7 +561,7 @@ err_out: return error; m09_out: - dev_err(&client->dev, "No factory mode support for M09/GENERIC_FT\n"); + dev_err(&client->dev, "No factory mode support for M09/M12/GENERIC_FT\n"); return -EINVAL; } @@ -776,15 +786,16 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, * to have garbage in there */ memset(rdbuf, 0, sizeof(rdbuf)); - error = edt_ft5x06_ts_readwrite(client, 1, "\xbb", + error = edt_ft5x06_ts_readwrite(client, 1, "\xBB", EDT_NAME_LEN - 1, rdbuf); if (error) return error; - /* if we find something consistent, stay with that assumption - * at least M09 won't send 3 bytes here + /* Probe content for something consistent. + * M06 starts with a response byte, M12 gives the data directly. + * M09/Generic does not provide model number information. */ - if (!(strncasecmp(rdbuf + 1, "EP0", 3))) { + if (!strncasecmp(rdbuf + 1, "EP0", 3)) { tsdata->version = EDT_M06; /* remove last '$' end marker */ @@ -798,8 +809,22 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, *p++ = '\0'; strlcpy(model_name, rdbuf + 1, EDT_NAME_LEN); strlcpy(fw_version, p ? p : "", EDT_NAME_LEN); + } else if (!strncasecmp(rdbuf, "EP0", 3)) { + tsdata->version = EDT_M12; + + /* remove last '$' end marker */ + rdbuf[EDT_NAME_LEN - 2] = '\0'; + if (rdbuf[EDT_NAME_LEN - 3] == '$') + rdbuf[EDT_NAME_LEN - 3] = '\0'; + + /* look for Model/Version separator */ + p = strchr(rdbuf, '*'); + if (p) + *p++ = '\0'; + strlcpy(model_name, rdbuf, EDT_NAME_LEN); + strlcpy(fw_version, p ? p : "", EDT_NAME_LEN); } else { - /* If it is not an EDT M06 touchscreen, then the model + /* If it is not an EDT M06/M12 touchscreen, then the model * detection is a bit hairy. The different ft5x06 * firmares around don't reliably implement the * identification registers. Well, we'll take a shot. @@ -894,7 +919,8 @@ edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata) tsdata->report_rate = edt_ft5x06_register_read(tsdata, reg_addr->reg_report_rate); if (tsdata->version == EDT_M06 || - tsdata->version == EDT_M09) { + tsdata->version == EDT_M09 || + tsdata->version == EDT_M12) { tsdata->num_x = edt_ft5x06_register_read(tsdata, reg_addr->reg_num_x); tsdata->num_y = edt_ft5x06_register_read(tsdata, @@ -921,6 +947,7 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) break; case EDT_M09: + case EDT_M12: reg_addr->reg_threshold = M09_REGISTER_THRESHOLD; reg_addr->reg_report_rate = NO_REGISTER; reg_addr->reg_gain = M09_REGISTER_GAIN; @@ -1025,7 +1052,8 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, input->dev.parent = &client->dev; if (tsdata->version == EDT_M06 || - tsdata->version == EDT_M09) { + tsdata->version == EDT_M09 || + tsdata->version == EDT_M12) { input_set_abs_params(input, ABS_MT_POSITION_X, 0, tsdata->num_x * 64 - 1, 0, 0); input_set_abs_params(input, ABS_MT_POSITION_Y,