From: Alberto Bursi Date: Mon, 6 Feb 2017 10:39:21 +0000 (+0100) Subject: uboot-kirkwood: add Zyxel NSA325 uboot X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=add1dd00813ccccfe5f1ee8e6bf04db7822b9fd5;p=openwrt%2Fstaging%2Fneocturne.git uboot-kirkwood: add Zyxel NSA325 uboot add uboot for NSA325 Signed-off-by: Alberto Bursi --- diff --git a/package/boot/uboot-kirkwood/Makefile b/package/boot/uboot-kirkwood/Makefile index 089188a295..e06a680b70 100644 --- a/package/boot/uboot-kirkwood/Makefile +++ b/package/boot/uboot-kirkwood/Makefile @@ -52,6 +52,10 @@ define U-Boot/nsa310 NAME:=Zyxel NSA310 endef +define U-Boot/nsa325 + NAME:=Zyxel NSA325v1 and v2 +endef + define U-Boot/pogo_e02 NAME:=Cloud Engines Pogoplug E02 endef @@ -70,6 +74,7 @@ UBOOT_TARGETS := \ ib62x0 ib62x0_second_stage \ iconnect iconnect_second_stage \ nsa310 \ + nsa325 \ pogo_e02 pogo_e02_second_stage \ sheevaplug diff --git a/package/boot/uboot-kirkwood/patches/008-nsa325-uboot-generic.patch b/package/boot/uboot-kirkwood/patches/008-nsa325-uboot-generic.patch new file mode 100644 index 0000000000..bb179b95a6 --- /dev/null +++ b/package/boot/uboot-kirkwood/patches/008-nsa325-uboot-generic.patch @@ -0,0 +1,709 @@ +diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig +index 819bd3b..6a2d578 100644 +--- a/arch/arm/mach-kirkwood/Kconfig ++++ b/arch/arm/mach-kirkwood/Kconfig +@@ -55,6 +55,9 @@ config TARGET_NSA310 + config TARGET_NSA310S + bool "Zyxel NSA310S" + ++config TARGET_NSA325 ++ bool "Zyxel NSA325 board" ++ + endchoice + + config SYS_SOC +@@ -77,5 +80,6 @@ source "board/Seagate/goflexhome/Kconfig" + source "board/Seagate/nas220/Kconfig" + source "board/zyxel/nsa310/Kconfig" + source "board/zyxel/nsa310s/Kconfig" ++source "board/zyxel/nsa325/Kconfig" + + endif +diff --git a/board/zyxel/nsa325/Kconfig b/board/zyxel/nsa325/Kconfig +new file mode 100644 +index 0000000..1fe5ead +--- /dev/null ++++ b/board/zyxel/nsa325/Kconfig +@@ -0,0 +1,12 @@ ++if TARGET_NSA325 ++ ++config SYS_BOARD ++ default "nsa325" ++ ++config SYS_VENDOR ++ default "zyxel" ++ ++config SYS_CONFIG_NAME ++ default "nsa325" ++ ++endif +diff --git a/board/zyxel/nsa325/MAINTAINERS b/board/zyxel/nsa325/MAINTAINERS +new file mode 100644 +index 0000000..130b4d9 +--- /dev/null ++++ b/board/zyxel/nsa325/MAINTAINERS +@@ -0,0 +1,6 @@ ++NSA325 BOARD ++M: Alberto Bursi ++S: Maintained ++F: board/zyxel/nsa325/ ++F: include/configs/nsa325.h ++F: configs/nsa325_defconfig +diff --git a/board/zyxel/nsa325/Makefile b/board/zyxel/nsa325/Makefile +new file mode 100644 +index 0000000..4ee953b +--- /dev/null ++++ b/board/zyxel/nsa325/Makefile +@@ -0,0 +1,13 @@ ++# ++# (C) Copyright 2015 bodhi ++# ++# Based on ++# (C) Copyright 2009 ++# Marvell Semiconductor ++# Written-by: Prafulla Wadaskar ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++obj-y := nsa325.o ++ +diff --git a/board/zyxel/nsa325/kwbimage.cfg b/board/zyxel/nsa325/kwbimage.cfg +new file mode 100644 +index 0000000..5a27d38 +--- /dev/null ++++ b/board/zyxel/nsa325/kwbimage.cfg +@@ -0,0 +1,78 @@ ++# Copyright (C) 2015 bodhi ++# ++# Extracted from Zyxel GPL source for u-boot-1.1.4_NSA325v2 ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, ++# MA 02110-1301 USA ++# ++# Refer docs/README.kwimage for more details about how-to configure ++# and create kirkwood boot image ++# ++ ++# Boot Media configurations ++#BOOT_FROM uart ++BOOT_FROM nand ++NAND_ECC_MODE default ++NAND_PAGE_SIZE 0x0800 ++ ++# SOC registers configuration using bootrom header extension ++# Maximum KWBIMAGE_MAX_CONFIG configurations allowed ++ ++# Configure RGMII-0 interface pad voltage to 1.8V ++DATA 0xFFD100e0 0x1b1b1b9b ++ ++#Dram initalization ++DATA 0xFFD01400 0x4301503E # DDR Configuration register ++DATA 0xFFD01404 0xB9843000 # DDR Controller Control Low ++DATA 0xFFD01408 0x33137777 # DDR Timing (Low) ++DATA 0xFFD0140C 0x16000C55 # DDR Timing (High) ++DATA 0xFFD01410 0x04000000 # DDR Address Control ++DATA 0xFFD01414 0x00000000 # DDR Open Pages Control ++DATA 0xFFD01418 0x00000000 # DDR Operation ++DATA 0xFFD0141C 0x00000672 # DDR Mode ++DATA 0xFFD01420 0x00000004 # DDR Extended Mode ++DATA 0xFFD01424 0x0000F14F # DDR Controller Control High ++DATA 0xFFD01428 0x000D6720 # DDR3 ODT Read Timing ++DATA 0xFFD0147C 0x0000B571 # DDR2 ODT Write Timing ++DATA 0xFFD01504 0x1FFFFFF1 # CS[0]n Size ++DATA 0xFFD01508 0x20000000 # CS[1]n Base address to 512Mb ++DATA 0xFFD0150C 0x1FFFFFF4 # CS[1]n Size 512Mb Window enabled for CS1 ++DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled ++DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled ++DATA 0xFFD01494 0x00120000 # DDR ODT Control (Low) ++DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) ++DATA 0xFFD0149C 0x0000E803 # CPU ODT Control ++ ++DATA 0xFFD015D0 0x00000630 ++DATA 0xFFD015D4 0x00000046 ++DATA 0xFFD015D8 0x00000008 ++DATA 0xFFD015DC 0x00000000 ++DATA 0xFFD015E0 0x00000023 ++DATA 0xFFD015E4 0x00203C18 ++DATA 0xFFD01620 0x00384800 ++DATA 0xFFD01480 0x00000001 ++DATA 0xFFD20134 0x66666666 ++DATA 0xFFD20138 0x00066666 ++ ++#Disable nsa325 hardware watchdog to allow successful kwbooting ++DATA 0xFFD10100 0x00004000 # set GPIO 14 to high to disable the watchdog ++DATA 0xFFD10104 0xFFFFBFFF # set GPIO 14 to output (to block any other input to it) ++ ++# End of Header extension ++DATA 0x0 0x0 ++ +diff --git a/board/zyxel/nsa325/nsa325.c b/board/zyxel/nsa325/nsa325.c +new file mode 100644 +index 0000000..4cd1c0f +--- /dev/null ++++ b/board/zyxel/nsa325/nsa325.c +@@ -0,0 +1,265 @@ ++/* ++ * Copyright (C) 2015 bodhi ++ * ++ * Based on ++ * Copyright (C) 2014 Jason Plum ++ * ++ * Based on nsa320.c originall written by ++ * Copyright (C) 2012 Peter Schildmann ++ * ++ * Based on guruplug.c originally written by ++ * Siddarth Gore ++ * (C) Copyright 2009 ++ * Marvell Semiconductor ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, ++ * MA 02110-1301 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "nsa325.h" ++#include ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++int board_early_init_f(void) ++{ ++ /* ++ * default gpio configuration ++ * There are maximum 64 gpios controlled through 2 sets of registers ++ * the below configuration configures mainly initial LED status ++ */ ++ mvebu_config_gpio(NSA325_VAL_LOW, NSA325_VAL_HIGH, ++ NSA325_OE_LOW, NSA325_OE_HIGH); ++ ++ /* Multi-Purpose Pins Functionality configuration */ ++ /* (all LEDs & power off active high) */ ++ u32 kwmpp_config[] = { ++ MPP0_NF_IO2, ++ MPP1_NF_IO3, ++ MPP2_NF_IO4, ++ MPP3_NF_IO5, ++ MPP4_NF_IO6, ++ MPP5_NF_IO7, ++ MPP6_SYSRST_OUTn, ++ MPP7_GPO, ++ MPP8_TW_SDA, /* PCF8563 RTC chip */ ++ MPP9_TW_SCK, /* connected to TWSI */ ++ MPP10_UART0_TXD, ++ MPP11_UART0_RXD, ++ MPP12_GPO, /* HDD2 LED (green) */ ++ MPP13_GPIO, /* HDD2 LED (red) */ ++ MPP14_GPIO, /* MCU DATA pin (in) */ ++ MPP15_GPIO, /* USB LED (green) */ ++ MPP16_GPIO, /* MCU CLK pin (out) */ ++ MPP17_GPIO, /* MCU ACT pin (out) */ ++ MPP18_NF_IO0, ++ MPP19_NF_IO1, ++ MPP20_GPIO, ++ MPP21_GPIO, /* USB power */ ++ MPP22_GPIO, ++ MPP23_GPIO, ++ MPP24_GPIO, ++ MPP25_GPIO, ++ MPP26_GPIO, ++ MPP27_GPIO, ++ MPP28_GPIO, /* SYS LED (green) */ ++ MPP29_GPIO, /* SYS LED (orange) */ ++ MPP30_GPIO, ++ MPP31_GPIO, ++ MPP32_GPIO, ++ MPP33_GPIO, ++ MPP34_GPIO, ++ MPP35_GPIO, ++ MPP36_GPIO, /* reset button */ ++ MPP37_GPIO, /* copy button */ ++ MPP38_GPIO, /* VID B0 */ ++ MPP39_GPIO, /* COPY LED (green) */ ++ MPP40_GPIO, /* COPY LED (red) */ ++ MPP41_GPIO, /* HDD1 LED (green) */ ++ MPP42_GPIO, /* HDD1 LED (red) */ ++ MPP43_GPIO, /* HTP pin */ ++ MPP44_GPIO, /* buzzer */ ++ MPP45_GPIO, /* VID B1 */ ++ MPP46_GPIO, /* power button */ ++ MPP47_GPIO, /* HDD2 power */ ++ MPP48_GPIO, /* power off */ ++ 0 ++ }; ++ kirkwood_mpp_conf(kwmpp_config, NULL); ++ return 0; ++} ++ ++int board_init(void) ++{ ++ ++ /* address of boot parameters */ ++ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; ++ ++ /* This disables the hardware watchdog in the mcu on this board. */ ++ kw_gpio_set_valid(14, 1); ++ kw_gpio_direction_output(14, 0); ++ kw_gpio_set_value(14, 1); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_RESET_PHY_R ++/* Configure and enable MV88E1318 PHY */ ++void reset_phy(void) ++{ ++ u16 reg; ++ u16 devadr; ++ char *name = "egiga0"; ++ ++ if (miiphy_set_current_dev(name)) ++ return; ++ ++ /* command to read PHY dev address */ ++ if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { ++ printf("Err..%s could not read PHY dev address\n", ++ __FUNCTION__); ++ return; ++ } ++ ++ /* Set RGMII delay */ ++ miiphy_write(name, devadr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG); ++ miiphy_read(name, devadr, MV88E1318_MAC_CTRL_REG, ®); ++ reg |= (MV88E1318_RGMII_RXTM_CTRL | MV88E1318_RGMII_TXTM_CTRL); ++ miiphy_write(name, devadr, MV88E1318_MAC_CTRL_REG, reg); ++ miiphy_write(name, devadr, MV88E1318_PGADR_REG, 0); ++ ++ /* reset the phy */ ++ miiphy_reset(name, devadr); ++ ++ /* The ZyXEL NSA325 uses the 88E1310S Alaska (interface identical to 88E1318) */ ++ /* and has an MCU attached to the LED[2] via tristate interrupt */ ++ reg = 0; ++ ++ /* switch to LED register page */ ++ miiphy_write(name, devadr, MV88E1318_PGADR_REG, MV88E1318_LED_PG); ++ /* read out LED polarity register */ ++ miiphy_read(name, devadr, MV88E1318_LED_POL_REG, ®); ++ /* clear 4, set 5 - LED2 low, tri-state */ ++ reg &= ~(MV88E1318_LED2_4); ++ reg |= (MV88E1318_LED2_5); ++ /* write back LED polarity register */ ++ miiphy_write(name, devadr, MV88E1318_LED_POL_REG, reg); ++ /* jump back to page 0, per the PHY chip documenation. */ ++ miiphy_write(name, devadr, MV88E1318_PGADR_REG, 0); ++ ++ /* Set the phy back to auto-negotiation mode. Onboard mcu sets it as 10Mbits/s on poweroff for WoL function */ ++ miiphy_write(name, devadr, 0x4, 0x1e1); ++ miiphy_write(name, devadr, 0x9, 0x300); ++ /* Downshift */ ++ miiphy_write(name, devadr, 0x10, 0x3860); ++ miiphy_write(name, devadr, 0x0, 0x9140); ++ ++ printf("MV88E1318 PHY initialized on %s\n", name); ++ ++} ++#endif /* CONFIG_RESET_PHY_R */ ++ ++#ifdef CONFIG_SHOW_BOOT_PROGRESS ++void show_boot_progress(int val) ++{ ++ struct kwgpio_registers *gpio0 = (struct kwgpio_registers *)MVEBU_GPIO0_BASE; ++ u32 dout0 = readl(&gpio0->dout); ++ u32 blen0 = readl(&gpio0->blink_en); ++ ++ struct kwgpio_registers *gpio1 = (struct kwgpio_registers *)MVEBU_GPIO1_BASE; ++ u32 dout1 = readl(&gpio1->dout); ++ u32 blen1 = readl(&gpio1->blink_en); ++ ++ switch (val) { ++ case BOOTSTAGE_ID_DECOMP_IMAGE: ++ writel(blen0 & ~(SYS_GREEN_LED | SYS_ORANGE_LED), &gpio0->blink_en); ++ writel((dout0 & ~SYS_GREEN_LED) | SYS_ORANGE_LED, &gpio0->dout); ++ break; ++ case BOOTSTAGE_ID_RUN_OS: ++ writel(dout0 & ~SYS_ORANGE_LED, &gpio0->dout); ++ writel(blen0 | SYS_GREEN_LED, &gpio0->blink_en); ++ break; ++ case BOOTSTAGE_ID_NET_START: ++ writel(dout1 & ~COPY_RED_LED, &gpio1->dout); ++ writel((blen1 & ~COPY_RED_LED) | COPY_GREEN_LED, &gpio1->blink_en); ++ break; ++ case BOOTSTAGE_ID_NET_LOADED: ++ writel(blen1 & ~(COPY_RED_LED | COPY_GREEN_LED), &gpio1->blink_en); ++ writel((dout1 & ~COPY_RED_LED) | COPY_GREEN_LED, &gpio1->dout); ++ break; ++ case -BOOTSTAGE_ID_NET_NETLOOP_OK: ++ case -BOOTSTAGE_ID_NET_LOADED: ++ writel(dout1 & ~COPY_GREEN_LED, &gpio1->dout); ++ writel((blen1 & ~COPY_GREEN_LED) | COPY_RED_LED, &gpio1->blink_en); ++ break; ++ default: ++ if (val < 0) { ++ /* error */ ++ printf("Error occured, error code = %d\n", -val); ++ writel(dout0 & ~SYS_GREEN_LED, &gpio0->dout); ++ writel(blen0 | SYS_ORANGE_LED, &gpio0->blink_en); ++ } ++ break; ++ } ++} ++#endif ++ ++#if defined(CONFIG_KIRKWOOD_GPIO) ++/* Return GPIO button status */ ++/* ++un-pressed: ++ gpio-36 (Reset Button ) in hi (act lo) - IRQ edge (clear ) ++ gpio-37 (Copy Button ) in hi (act lo) - IRQ edge (clear ) ++ gpio-46 (Power Button ) in lo (act hi) - IRQ edge (clear ) ++pressed ++ gpio-36 (Reset Button ) in lo (act hi) - IRQ edge (clear ) ++ gpio-37 (Copy Button ) in lo (act hi) - IRQ edge (clear ) ++ gpio-46 (Power Button ) in hi (act lo) - IRQ edge (clear ) ++*/ ++ ++static int ++do_read_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ++{ ++ if (strcmp(argv[1], "power") == 0) { ++ kw_gpio_set_valid(BTN_POWER, GPIO_INPUT_OK); ++ kw_gpio_direction_input(BTN_POWER); ++ return !kw_gpio_get_value(BTN_POWER); ++ } ++ else if (strcmp(argv[1], "reset") == 0) ++ return kw_gpio_get_value(BTN_RESET); ++ else if (strcmp(argv[1], "copy") == 0) ++ return kw_gpio_get_value(BTN_COPY); ++ else ++ return -1; ++} ++ ++ ++U_BOOT_CMD(button, 2, 0, do_read_button, ++ "Return GPIO button status 0=off 1=on", ++ "- button power|reset|copy: test buttons states\n" ++); ++ ++#endif ++ +diff --git a/board/zyxel/nsa325/nsa325.h b/board/zyxel/nsa325/nsa325.h +new file mode 100644 +index 0000000..996653e +--- /dev/null ++++ b/board/zyxel/nsa325/nsa325.h +@@ -0,0 +1,77 @@ ++/* ++ * Copyright (C) 2014 Jason Plum ++ * ++ * Based on nsa320.h originall written by ++ * Copyright (C) 2012 Peter Schildmann ++ * ++ * Based on guruplug.h originally written by ++ * Siddarth Gore ++ * (C) Copyright 2009 ++ * Marvell Semiconductor ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, ++ * MA 02110-1301 USA ++ */ ++ ++#ifndef __NSA325_H ++#define __NSA325_H ++ ++/* low GPIO's */ ++#define HDD2_GREEN_LED (1 << 12) ++#define HDD2_RED_LED (1 << 13) ++#define USB_GREEN_LED (1 << 15) ++#define USB_POWER (1 << 21) ++#define SYS_GREEN_LED (1 << 28) ++#define SYS_ORANGE_LED (1 << 29) ++ ++#define PIN_USB_GREEN_LED 15 ++#define PIN_USB_POWER 21 ++ ++#define NSA325_OE_LOW (~(HDD2_GREEN_LED | HDD2_RED_LED | \ ++ USB_GREEN_LED | USB_POWER | \ ++ SYS_GREEN_LED | SYS_ORANGE_LED)) ++#define NSA325_VAL_LOW (SYS_GREEN_LED | USB_POWER) ++ ++/* high GPIO's */ ++#define COPY_GREEN_LED (1 << 7) ++#define COPY_RED_LED (1 << 8) ++#define HDD1_GREEN_LED (1 << 9) ++#define HDD1_RED_LED (1 << 10) ++#define HDD2_POWER (1 << 15) ++#define WATCHDOG_SIGNAL (1 << 14) ++ ++#define NSA325_OE_HIGH (~(COPY_GREEN_LED | COPY_RED_LED | \ ++ HDD1_GREEN_LED | HDD1_RED_LED | HDD2_POWER | WATCHDOG_SIGNAL )) ++#define NSA325_VAL_HIGH (WATCHDOG_SIGNAL | HDD2_POWER) ++ ++/* PHY related */ ++#define MV88E1318_PGADR_REG 22 ++#define MV88E1318_MAC_CTRL_PG 2 ++#define MV88E1318_MAC_CTRL_REG 21 ++#define MV88E1318_RGMII_TXTM_CTRL (1 << 4) ++#define MV88E1318_RGMII_RXTM_CTRL (1 << 5) ++#define MV88E1318_LED_PG 3 ++#define MV88E1318_LED_POL_REG 17 ++#define MV88E1318_LED2_4 (1 << 4) ++#define MV88E1318_LED2_5 (1 << 5) ++ ++#define BTN_POWER 46 ++#define BTN_RESET 36 ++#define BTN_COPY 37 ++ ++#endif /* __NSA325_H */ +diff --git a/configs/nsa325_defconfig b/configs/nsa325_defconfig +new file mode 100644 +index 0000000..48e09cc +--- /dev/null ++++ b/configs/nsa325_defconfig +@@ -0,0 +1,18 @@ ++CONFIG_ARM=y ++CONFIG_KIRKWOOD=y ++CONFIG_TARGET_NSA325=y ++CONFIG_BOOTDELAY=3 ++CONFIG_SYS_PROMPT="NSA325> " ++# CONFIG_CMD_IMLS is not set ++# CONFIG_CMD_FLASH is not set ++CONFIG_SYS_NS16550=y ++CONFIG_CMD_FDT=y ++CONFIG_OF_LIBFDT=y ++CONFIG_CMD_SETEXPR=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_NAND=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_USB=y ++CONFIG_USB=y ++CONFIG_CMD_FAT=y ++CONFIG_USB_STORAGE=y +\ No newline at end of file +diff --git a/include/configs/nsa325.h b/include/configs/nsa325.h +new file mode 100644 +index 0000000..e5a8e2a +--- /dev/null ++++ b/include/configs/nsa325.h +@@ -0,0 +1,170 @@ ++/* ++ * (C) Copyright 2016 bodhi ++ * ++ * Based on ++ * Copyright (C) 2014 Jason Plum ++ * Based on ++ * Copyright (C) 2012 Peter Schildmann ++ * ++ * Based on guruplug.h originally written by ++ * Siddarth Gore ++ * (C) Copyright 2009 ++ * Marvell Semiconductor ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, ++ * MA 02110-1301 USA ++ */ ++ ++#ifndef _CONFIG_NSA325_H ++#define _CONFIG_NSA325_H ++ ++/* ++ * Version number information ++ */ ++#define CONFIG_IDENT_STRING "\nZyXEL NSA325 2-Bay Power Media Server" ++ ++/* ++ * High Level Configuration Options (easy to change) ++ */ ++#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ ++#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ ++#define CONFIG_KW88F6281 1 /* SOC Name */ ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ ++ ++/* ++ * Misc Configuration Options ++ */ ++#define CONFIG_SHOW_BOOT_PROGRESS 1 /* boot progess display (LED's) */ ++ ++/* ++ * Commands configuration ++ */ ++#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ ++#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ ++#define CONFIG_CMD_DHCP ++#define CONFIG_CMD_ENV ++#define CONFIG_CMD_IDE ++#define CONFIG_CMD_MII ++#define CONFIG_CMD_NAND ++#define CONFIG_CMD_PING ++#define CONFIG_CMD_USB ++#define CONFIG_CMD_DATE ++#define CONFIG_SYS_LONGHELP ++#define CONFIG_PREBOOT ++#define CONFIG_SYS_HUSH_PARSER ++#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " ++ ++/* ++ * mv-common.h should be defined after CMD configs since it used them ++ * to enable certain macros ++ */ ++#include "mv-common.h" ++ ++#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ ++#define CONFIG_SYS_PROMPT "NSA325> " /* Command Prompt */ ++ ++/* ++ * Environment variables configurations ++ */ ++#ifdef CONFIG_CMD_NAND ++#define CONFIG_ENV_IS_IN_NAND 1 ++#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ ++#else ++#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ ++#endif ++/* ++ * max 4k env size is enough, but in case of nand ++ * it has to be rounded to sector size ++ */ ++#define CONFIG_ENV_SIZE 0x20000 /* 128k */ ++#define CONFIG_ENV_ADDR 0xc0000 ++#define CONFIG_ENV_OFFSET 0xc0000 /* env starts here */ ++ ++/* ++ * Default environment variables ++ */ ++#define CONFIG_BOOTCOMMAND \ ++ "ubi part ubi; " \ ++ "ubi read 0x800000 kernel; " \ ++ "bootm 0x800000" ++ ++#define CONFIG_MTDPARTS \ ++ "mtdparts=orion_nand:" \ ++ "0x0c0000(uboot)," \ ++ "0x80000(uboot_env)," \ ++ "0x7ec0000(ubi)\0" ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "console=console=ttyS0,115200\0" \ ++ "mtdids=nand0=orion_nand\0" \ ++ "mtdparts="CONFIG_MTDPARTS \ ++ "bootargs_root=\0" ++ ++/* ++ * Ethernet Driver configuration ++ */ ++#ifdef CONFIG_CMD_NET ++#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ ++#define CONFIG_PHY_BASE_ADR 0x1 ++#define CONFIG_PHY_GIGE ++#define CONFIG_NETCONSOLE ++#endif /* CONFIG_CMD_NET */ ++ ++/* ++ * SATA Driver configuration ++ */ ++#ifdef CONFIG_MVSATA_IDE ++#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET ++#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET ++#endif /* CONFIG_MVSATA_IDE */ ++ ++/* ++ * File system ++ */ ++#define CONFIG_CMD_EXT2 ++#define CONFIG_CMD_EXT4 ++#define CONFIG_CMD_FAT ++#define CONFIG_CMD_JFFS2 ++#define CONFIG_JFFS2_NAND ++#define CONFIG_JFFS2_LZO ++#define CONFIG_CMD_UBI ++#define CONFIG_CMD_UBIFS ++#define CONFIG_RBTREE ++#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ ++#define CONFIG_MTD_PARTITIONS ++#define CONFIG_CMD_MTDPARTS ++#define CONFIG_LZO ++ ++/* ++ * EFI partition ++ */ ++#define CONFIG_EFI_PARTITION ++ ++/* ++ * Date Time ++ */ ++#ifdef CONFIG_CMD_DATE ++#define CONFIG_RTC_MV ++#define CONFIG_CMD_SNTP ++#define CONFIG_CMD_DNS ++#endif /* CONFIG_CMD_DATE */ ++ ++#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */ ++ ++#endif /* _CONFIG_NSA325_H */