From: Christian Marangi Date: Wed, 21 Jun 2023 09:35:33 +0000 (+0200) Subject: generic: 6.1: backport LEDs patch adding additional modes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=adc3ee1cc8e4b16ffb5b95fa9034fda81cb01a7a;p=openwrt%2Fstaging%2Fthess.git generic: 6.1: backport LEDs patch adding additional modes Backport LEDs patch adding additional modes for split link speed and half/full duplex state. Signed-off-by: Christian Marangi --- diff --git a/target/linux/generic/backport-6.1/805-v6.5-01-leds-trigger-netdev-add-additional-specific-link-spe.patch b/target/linux/generic/backport-6.1/805-v6.5-01-leds-trigger-netdev-add-additional-specific-link-spe.patch new file mode 100644 index 0000000000..1c564b3897 --- /dev/null +++ b/target/linux/generic/backport-6.1/805-v6.5-01-leds-trigger-netdev-add-additional-specific-link-spe.patch @@ -0,0 +1,242 @@ +From d5e01266e7f5fa12400d4c8aa4e86fe89dcc61e9 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 19 Jun 2023 22:46:58 +0200 +Subject: [PATCH 1/3] leds: trigger: netdev: add additional specific link speed + mode + +Add additional modes for specific link speed. Use ethtool APIs to get the +current link speed and enable the LED accordingly. Under netdev event +handler the rtnl lock is already held and is not needed to be set to +access ethtool APIs. + +This is especially useful for PHY and Switch that supports LEDs hw +control for specific link speed. (example scenario a PHY that have 2 LED +connected one green and one orange where the green is turned on with +1000mbps speed and orange is turned on with 10mpbs speed) + +On mode set from sysfs we check if we have enabled split link speed mode +and reject enabling generic link mode to prevent wrong and redundant +configuration. + +Rework logic on the set baseline state to support these new modes to +select if we need to turn on or off the LED. + +Add additional modes: +- link_10: Turn on LED when link speed is 10mbps +- link_100: Turn on LED when link speed is 100mbps +- link_1000: Turn on LED when link speed is 1000mbps + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Acked-by: Lee Jones +Signed-off-by: Jakub Kicinski +--- + drivers/leds/trigger/ledtrig-netdev.c | 80 +++++++++++++++++++++++---- + include/linux/leds.h | 3 + + 2 files changed, 73 insertions(+), 10 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -13,6 +13,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -21,6 +22,7 @@ + #include + #include + #include ++#include + #include + #include "../leds.h" + +@@ -52,6 +54,8 @@ struct led_netdev_data { + unsigned int last_activity; + + unsigned long mode; ++ int link_speed; ++ + bool carrier_link_up; + bool hw_control; + }; +@@ -77,7 +81,24 @@ static void set_baseline_state(struct le + if (!trigger_data->carrier_link_up) { + led_set_brightness(led_cdev, LED_OFF); + } else { ++ bool blink_on = false; ++ + if (test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode)) ++ blink_on = true; ++ ++ if (test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) && ++ trigger_data->link_speed == SPEED_10) ++ blink_on = true; ++ ++ if (test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) && ++ trigger_data->link_speed == SPEED_100) ++ blink_on = true; ++ ++ if (test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) && ++ trigger_data->link_speed == SPEED_1000) ++ blink_on = true; ++ ++ if (blink_on) + led_set_brightness(led_cdev, + led_cdev->blink_brightness); + else +@@ -161,6 +182,18 @@ static bool can_hw_control(struct led_ne + return true; + } + ++static void get_device_state(struct led_netdev_data *trigger_data) ++{ ++ struct ethtool_link_ksettings cmd; ++ ++ trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev); ++ if (!trigger_data->carrier_link_up) ++ return; ++ ++ if (!__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd)) ++ trigger_data->link_speed = cmd.base.speed; ++} ++ + static ssize_t device_name_show(struct device *dev, + struct device_attribute *attr, char *buf) + { +@@ -196,8 +229,12 @@ static int set_device_name(struct led_ne + dev_get_by_name(&init_net, trigger_data->device_name); + + trigger_data->carrier_link_up = false; +- if (trigger_data->net_dev != NULL) +- trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev); ++ trigger_data->link_speed = SPEED_UNKNOWN; ++ if (trigger_data->net_dev != NULL) { ++ rtnl_lock(); ++ get_device_state(trigger_data); ++ rtnl_unlock(); ++ } + + trigger_data->last_activity = 0; + +@@ -234,6 +271,9 @@ static ssize_t netdev_led_attr_show(stru + + switch (attr) { + case TRIGGER_NETDEV_LINK: ++ case TRIGGER_NETDEV_LINK_10: ++ case TRIGGER_NETDEV_LINK_100: ++ case TRIGGER_NETDEV_LINK_1000: + case TRIGGER_NETDEV_TX: + case TRIGGER_NETDEV_RX: + bit = attr; +@@ -249,7 +289,7 @@ static ssize_t netdev_led_attr_store(str + size_t size, enum led_trigger_netdev_modes attr) + { + struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev); +- unsigned long state; ++ unsigned long state, mode = trigger_data->mode; + int ret; + int bit; + +@@ -259,6 +299,9 @@ static ssize_t netdev_led_attr_store(str + + switch (attr) { + case TRIGGER_NETDEV_LINK: ++ case TRIGGER_NETDEV_LINK_10: ++ case TRIGGER_NETDEV_LINK_100: ++ case TRIGGER_NETDEV_LINK_1000: + case TRIGGER_NETDEV_TX: + case TRIGGER_NETDEV_RX: + bit = attr; +@@ -267,13 +310,20 @@ static ssize_t netdev_led_attr_store(str + return -EINVAL; + } + +- cancel_delayed_work_sync(&trigger_data->work); +- + if (state) +- set_bit(bit, &trigger_data->mode); ++ set_bit(bit, &mode); + else +- clear_bit(bit, &trigger_data->mode); ++ clear_bit(bit, &mode); ++ ++ if (test_bit(TRIGGER_NETDEV_LINK, &mode) && ++ (test_bit(TRIGGER_NETDEV_LINK_10, &mode) || ++ test_bit(TRIGGER_NETDEV_LINK_100, &mode) || ++ test_bit(TRIGGER_NETDEV_LINK_1000, &mode))) ++ return -EINVAL; ++ ++ cancel_delayed_work_sync(&trigger_data->work); + ++ trigger_data->mode = mode; + trigger_data->hw_control = can_hw_control(trigger_data); + + set_baseline_state(trigger_data); +@@ -295,6 +345,9 @@ static ssize_t netdev_led_attr_store(str + static DEVICE_ATTR_RW(trigger_name) + + DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK); ++DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10); ++DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100); ++DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000); + DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX); + DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX); + +@@ -338,6 +391,9 @@ static DEVICE_ATTR_RW(interval); + static struct attribute *netdev_trig_attrs[] = { + &dev_attr_device_name.attr, + &dev_attr_link.attr, ++ &dev_attr_link_10.attr, ++ &dev_attr_link_100.attr, ++ &dev_attr_link_1000.attr, + &dev_attr_rx.attr, + &dev_attr_tx.attr, + &dev_attr_interval.attr, +@@ -368,9 +424,10 @@ static int netdev_trig_notify(struct not + mutex_lock(&trigger_data->lock); + + trigger_data->carrier_link_up = false; ++ trigger_data->link_speed = SPEED_UNKNOWN; + switch (evt) { + case NETDEV_CHANGENAME: +- trigger_data->carrier_link_up = netif_carrier_ok(dev); ++ get_device_state(trigger_data); + fallthrough; + case NETDEV_REGISTER: + if (trigger_data->net_dev) +@@ -384,7 +441,7 @@ static int netdev_trig_notify(struct not + break; + case NETDEV_UP: + case NETDEV_CHANGE: +- trigger_data->carrier_link_up = netif_carrier_ok(dev); ++ get_device_state(trigger_data); + break; + } + +@@ -427,7 +484,10 @@ static void netdev_trig_work(struct work + if (trigger_data->last_activity != new_activity) { + led_stop_software_blink(trigger_data->led_cdev); + +- invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode); ++ invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode) || ++ test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) || ++ test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) || ++ test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode); + interval = jiffies_to_msecs( + atomic_read(&trigger_data->interval)); + /* base state is ON (link present) */ +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -530,6 +530,9 @@ static inline void *led_get_trigger_data + /* Trigger specific enum */ + enum led_trigger_netdev_modes { + TRIGGER_NETDEV_LINK = 0, ++ TRIGGER_NETDEV_LINK_10, ++ TRIGGER_NETDEV_LINK_100, ++ TRIGGER_NETDEV_LINK_1000, + TRIGGER_NETDEV_TX, + TRIGGER_NETDEV_RX, + diff --git a/target/linux/generic/backport-6.1/805-v6.5-02-leds-trigger-netdev-add-additional-specific-link-dup.patch b/target/linux/generic/backport-6.1/805-v6.5-02-leds-trigger-netdev-add-additional-specific-link-dup.patch new file mode 100644 index 0000000000..a5ab461828 --- /dev/null +++ b/target/linux/generic/backport-6.1/805-v6.5-02-leds-trigger-netdev-add-additional-specific-link-dup.patch @@ -0,0 +1,138 @@ +From f22f95b9ff1551c9bab13104131929f33d51f23f Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 19 Jun 2023 22:46:59 +0200 +Subject: [PATCH 2/3] leds: trigger: netdev: add additional specific link + duplex mode + +Add additional modes for specific link duplex. Use ethtool APIs to get the +current link duplex and enable the LED accordingly. Under netdev event +handler the rtnl lock is already held and is not needed to be set to +access ethtool APIs. + +This is especially useful for PHY and Switch that supports LEDs hw +control for specific link duplex. + +Add additional modes: +- half_duplex: Turn on LED when link is half duplex +- full_duplex: Turn on LED when link is full duplex + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Acked-by: Lee Jones +Signed-off-by: Jakub Kicinski +--- + drivers/leds/trigger/ledtrig-netdev.c | 27 +++++++++++++++++++++++++-- + include/linux/leds.h | 2 ++ + 2 files changed, 27 insertions(+), 2 deletions(-) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -55,6 +55,7 @@ struct led_netdev_data { + + unsigned long mode; + int link_speed; ++ u8 duplex; + + bool carrier_link_up; + bool hw_control; +@@ -98,6 +99,14 @@ static void set_baseline_state(struct le + trigger_data->link_speed == SPEED_1000) + blink_on = true; + ++ if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) && ++ trigger_data->duplex == DUPLEX_HALF) ++ blink_on = true; ++ ++ if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode) && ++ trigger_data->duplex == DUPLEX_FULL) ++ blink_on = true; ++ + if (blink_on) + led_set_brightness(led_cdev, + led_cdev->blink_brightness); +@@ -190,8 +199,10 @@ static void get_device_state(struct led_ + if (!trigger_data->carrier_link_up) + return; + +- if (!__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd)) ++ if (!__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd)) { + trigger_data->link_speed = cmd.base.speed; ++ trigger_data->duplex = cmd.base.duplex; ++ } + } + + static ssize_t device_name_show(struct device *dev, +@@ -230,6 +241,7 @@ static int set_device_name(struct led_ne + + trigger_data->carrier_link_up = false; + trigger_data->link_speed = SPEED_UNKNOWN; ++ trigger_data->duplex = DUPLEX_UNKNOWN; + if (trigger_data->net_dev != NULL) { + rtnl_lock(); + get_device_state(trigger_data); +@@ -274,6 +286,8 @@ static ssize_t netdev_led_attr_show(stru + case TRIGGER_NETDEV_LINK_10: + case TRIGGER_NETDEV_LINK_100: + case TRIGGER_NETDEV_LINK_1000: ++ case TRIGGER_NETDEV_HALF_DUPLEX: ++ case TRIGGER_NETDEV_FULL_DUPLEX: + case TRIGGER_NETDEV_TX: + case TRIGGER_NETDEV_RX: + bit = attr; +@@ -302,6 +316,8 @@ static ssize_t netdev_led_attr_store(str + case TRIGGER_NETDEV_LINK_10: + case TRIGGER_NETDEV_LINK_100: + case TRIGGER_NETDEV_LINK_1000: ++ case TRIGGER_NETDEV_HALF_DUPLEX: ++ case TRIGGER_NETDEV_FULL_DUPLEX: + case TRIGGER_NETDEV_TX: + case TRIGGER_NETDEV_RX: + bit = attr; +@@ -348,6 +364,8 @@ DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETD + DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10); + DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100); + DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000); ++DEFINE_NETDEV_TRIGGER(half_duplex, TRIGGER_NETDEV_HALF_DUPLEX); ++DEFINE_NETDEV_TRIGGER(full_duplex, TRIGGER_NETDEV_FULL_DUPLEX); + DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX); + DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX); + +@@ -394,6 +412,8 @@ static struct attribute *netdev_trig_att + &dev_attr_link_10.attr, + &dev_attr_link_100.attr, + &dev_attr_link_1000.attr, ++ &dev_attr_full_duplex.attr, ++ &dev_attr_half_duplex.attr, + &dev_attr_rx.attr, + &dev_attr_tx.attr, + &dev_attr_interval.attr, +@@ -425,6 +445,7 @@ static int netdev_trig_notify(struct not + + trigger_data->carrier_link_up = false; + trigger_data->link_speed = SPEED_UNKNOWN; ++ trigger_data->duplex = DUPLEX_UNKNOWN; + switch (evt) { + case NETDEV_CHANGENAME: + get_device_state(trigger_data); +@@ -487,7 +508,9 @@ static void netdev_trig_work(struct work + invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode) || + test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) || + test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) || +- test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode); ++ test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) || ++ test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) || ++ test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode); + interval = jiffies_to_msecs( + atomic_read(&trigger_data->interval)); + /* base state is ON (link present) */ +--- a/include/linux/leds.h ++++ b/include/linux/leds.h +@@ -533,6 +533,8 @@ enum led_trigger_netdev_modes { + TRIGGER_NETDEV_LINK_10, + TRIGGER_NETDEV_LINK_100, + TRIGGER_NETDEV_LINK_1000, ++ TRIGGER_NETDEV_HALF_DUPLEX, ++ TRIGGER_NETDEV_FULL_DUPLEX, + TRIGGER_NETDEV_TX, + TRIGGER_NETDEV_RX, + diff --git a/target/linux/generic/backport-6.1/805-v6.5-03-leds-trigger-netdev-expose-hw_control-status-via-sys.patch b/target/linux/generic/backport-6.1/805-v6.5-03-leds-trigger-netdev-expose-hw_control-status-via-sys.patch new file mode 100644 index 0000000000..67528cafe0 --- /dev/null +++ b/target/linux/generic/backport-6.1/805-v6.5-03-leds-trigger-netdev-expose-hw_control-status-via-sys.patch @@ -0,0 +1,45 @@ +From b655892ffd6d89b0c7407e099c40dbde82ee3f03 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 19 Jun 2023 22:47:00 +0200 +Subject: [PATCH 3/3] leds: trigger: netdev: expose hw_control status via sysfs + +Expose hw_control status via sysfs for the netdev trigger to give +userspace better understanding of the current state of the trigger and +the LED. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Reviewed-by: Kalesh AP +Acked-by: Lee Jones +Signed-off-by: Jakub Kicinski +--- + drivers/leds/trigger/ledtrig-netdev.c | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/drivers/leds/trigger/ledtrig-netdev.c ++++ b/drivers/leds/trigger/ledtrig-netdev.c +@@ -406,6 +406,16 @@ static ssize_t interval_store(struct dev + + static DEVICE_ATTR_RW(interval); + ++static ssize_t hw_control_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev); ++ ++ return sprintf(buf, "%d\n", trigger_data->hw_control); ++} ++ ++static DEVICE_ATTR_RO(hw_control); ++ + static struct attribute *netdev_trig_attrs[] = { + &dev_attr_device_name.attr, + &dev_attr_link.attr, +@@ -417,6 +427,7 @@ static struct attribute *netdev_trig_att + &dev_attr_rx.attr, + &dev_attr_tx.attr, + &dev_attr_interval.attr, ++ &dev_attr_hw_control.attr, + NULL + }; + ATTRIBUTE_GROUPS(netdev_trig);