From: David Bauer Date: Mon, 17 Jan 2022 19:57:04 +0000 (+0100) Subject: hostapd: update to v2.10 X-Git-Tag: v22.03.0-rc1~531 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=adb8c09a83d3f8e1d9e9fcbb8189b415ac0f6e86;p=openwrt%2Fstaging%2Fhauke.git hostapd: update to v2.10 Upstreamed patches: 020-mesh-make-forwarding-configurable.patch e6db1bc5da3fd7d5f4dba24aa102543b4749912f 550-WNM-allow-specifying-dialog-token.patch 979f19716539362f8ce60a77bf1b88fdcf5ba8e5 720-ACS-fix-channel-100-frequency.patch 2341585c349231af00cdef8d51458df01bc6965f 741-proxyarp-fix-compilation-with-Hotspot-2.0-disabled.patch 08bdf4f90de61a84ed8f4dd918272dd9d36e2e1f Compile-tested: wpad-wolfssl hostapd-openssl Run-tested: ath79-generic Signed-off-by: David Bauer Tested-by: Stijn Tintel --- diff --git a/package/network/services/hostapd/Makefile b/package/network/services/hostapd/Makefile index 7e4056bb18..584695786f 100644 --- a/package/network/services/hostapd/Makefile +++ b/package/network/services/hostapd/Makefile @@ -9,9 +9,9 @@ PKG_RELEASE:=$(AUTORELEASE) PKG_SOURCE_URL:=http://w1.fi/hostap.git PKG_SOURCE_PROTO:=git -PKG_SOURCE_DATE:=2021-05-22 -PKG_SOURCE_VERSION:=b102f19bcc53c7f7db3951424d4d46709b4f1986 -PKG_MIRROR_HASH:=cb3cb968883042fc582752be1607586696c18e6ecf9808c9a8ac50e204584367 +PKG_SOURCE_DATE:=2022-01-16 +PKG_SOURCE_VERSION:=cff80b4f7d3c0a47c052e8187d671710f48939e4 +PKG_MIRROR_HASH:=712965bfa11a2e601d3e1c9a51a2cf3cffc6db89abafb3df3eb0cfd83c64705b PKG_MAINTAINER:=Felix Fietkau PKG_LICENSE:=BSD-3-Clause diff --git a/package/network/services/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch b/package/network/services/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch index d948c41b30..16d24d1000 100644 --- a/package/network/services/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch +++ b/package/network/services/hostapd/patches/010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch @@ -14,16 +14,37 @@ Signed-off-by: Peter Oh --- a/wpa_supplicant/wpa_supplicant.c +++ b/wpa_supplicant/wpa_supplicant.c -@@ -2395,6 +2395,8 @@ void ibss_mesh_setup_freq(struct wpa_sup +@@ -2409,7 +2409,7 @@ static int drv_supports_vht(struct wpa_s + } + + +-static bool ibss_mesh_is_80mhz_avail(int channel, struct hostapd_hw_modes *mode) ++static bool ibss_mesh_is_80mhz_avail(int channel, struct hostapd_hw_modes *mode, bool dfs_enabled) + { + int i; + +@@ -2418,7 +2418,10 @@ static bool ibss_mesh_is_80mhz_avail(int + + chan = hw_get_channel_chan(mode, i, NULL); + if (!chan || +- chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR)) ++ chan->flag & HOSTAPD_CHAN_DISABLED) ++ return false; ++ ++ if (!dfs_enabled && chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR)) + return false; + } + +@@ -2447,6 +2450,8 @@ void ibss_mesh_setup_freq(struct wpa_sup int chwidth, seg0, seg1; u32 vht_caps = 0; - int is_24ghz; -+ int dfs_enabled = wpa_s->conf->country[0] && -+ (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR); + bool is_24ghz, is_6ghz; ++ bool dfs_enabled = wpa_s->conf->country[0] && ++ (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR); freq->freq = ssid->frequency; -@@ -2484,8 +2486,11 @@ void ibss_mesh_setup_freq(struct wpa_sup +@@ -2543,8 +2548,11 @@ void ibss_mesh_setup_freq(struct wpa_sup return; /* Check primary channel flags */ @@ -36,7 +57,7 @@ Signed-off-by: Peter Oh freq->channel = pri_chan->chan; -@@ -2518,8 +2523,11 @@ void ibss_mesh_setup_freq(struct wpa_sup +@@ -2577,8 +2585,11 @@ void ibss_mesh_setup_freq(struct wpa_sup return; /* Check secondary channel flags */ @@ -49,20 +70,25 @@ Signed-off-by: Peter Oh if (ht40 == -1) { if (!(pri_chan->flag & HOSTAPD_CHAN_HT40MINUS)) -@@ -2612,8 +2620,11 @@ skip_ht40: - return; +@@ -2667,7 +2678,7 @@ skip_to_6ghz: + return; - /* Back to HT configuration if channel not usable */ -- if (chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR)) -+ if (chan->flag & HOSTAPD_CHAN_DISABLED) - return; -+ if (chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR)) -+ if (!dfs_enabled) -+ return; - } + /* Back to HT configuration if channel not usable */ +- if (!ibss_mesh_is_80mhz_avail(channel, mode)) ++ if (!ibss_mesh_is_80mhz_avail(channel, mode, dfs_enabled)) + return; chwidth = CHANWIDTH_80MHZ; -@@ -2633,10 +2644,12 @@ skip_ht40: +@@ -2681,7 +2692,7 @@ skip_to_6ghz: + * above; check the remaining four 20 MHz channels for the total + * of 160 MHz bandwidth. + */ +- if (!ibss_mesh_is_80mhz_avail(channel + 16, mode)) ++ if (!ibss_mesh_is_80mhz_avail(channel + 16, mode, dfs_enabled)) + return; + + for (j = 0; j < ARRAY_SIZE(bw160); j++) { +@@ -2711,10 +2722,12 @@ skip_to_6ghz: if (!chan) continue; diff --git a/package/network/services/hostapd/patches/020-mesh-make-forwarding-configurable.patch b/package/network/services/hostapd/patches/020-mesh-make-forwarding-configurable.patch deleted file mode 100644 index 75726a6750..0000000000 --- a/package/network/services/hostapd/patches/020-mesh-make-forwarding-configurable.patch +++ /dev/null @@ -1,219 +0,0 @@ -From 90fe6429624fc48bc0e5d2d7eeecb7498708b5e3 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Wed, 18 Apr 2018 19:24:31 +0200 -Subject: [PATCH 18/18] mesh: make forwarding configurable - -Allow mesh_fwding to be specified in a mesh bss config, pass that -to the driver (only nl80211 implemented for now) and announce -forwarding capability accordingly. - -Signed-off-by: Daniel Golle ---- - src/ap/ap_config.h | 2 ++ - src/drivers/driver.h | 2 ++ - src/drivers/driver_nl80211.c | 3 +++ - wpa_supplicant/config.c | 4 ++++ - wpa_supplicant/config.h | 9 +++++++++ - wpa_supplicant/config_file.c | 4 ++++ - wpa_supplicant/config_ssid.h | 5 +++++ - wpa_supplicant/mesh.c | 6 ++++++ - wpa_supplicant/mesh_mpm.c | 4 ++-- - wpa_supplicant/wpa_supplicant.conf | 3 +++ - 10 files changed, 40 insertions(+), 2 deletions(-) - ---- a/src/ap/ap_config.h -+++ b/src/ap/ap_config.h -@@ -51,6 +51,7 @@ struct mesh_conf { - int dot11MeshRetryTimeout; /* msec */ - int dot11MeshConfirmTimeout; /* msec */ - int dot11MeshHoldingTimeout; /* msec */ -+ int mesh_fwding; - }; - - #define MAX_STA_COUNT 2007 -@@ -696,6 +697,7 @@ struct hostapd_bss_config { - - #define MESH_ENABLED BIT(0) - int mesh; -+ int mesh_fwding; - - u8 radio_measurements[RRM_CAPABILITIES_IE_LEN]; - ---- a/src/drivers/driver.h -+++ b/src/drivers/driver.h -@@ -1584,6 +1584,7 @@ struct wpa_driver_mesh_bss_params { - #define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS 0x00000004 - #define WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE 0x00000008 - #define WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD 0x00000010 -+#define WPA_DRIVER_MESH_CONF_FLAG_FORWARDING 0x00000020 - /* - * TODO: Other mesh configuration parameters would go here. - * See NL80211_MESHCONF_* for all the mesh config parameters. -@@ -1593,6 +1594,7 @@ struct wpa_driver_mesh_bss_params { - int peer_link_timeout; - int max_peer_links; - int rssi_threshold; -+ int forwarding; - u16 ht_opmode; - }; - ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -10456,6 +10456,9 @@ static int nl80211_put_mesh_config(struc - if (((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) && - nla_put_u8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS, - params->auto_plinks)) || -+ ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_FORWARDING) && -+ nla_put_u8(msg, NL80211_MESHCONF_FORWARDING, -+ params->forwarding)) || - ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS) && - nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS, - params->max_peer_links)) || ---- a/wpa_supplicant/config.c -+++ b/wpa_supplicant/config.c -@@ -2527,6 +2527,7 @@ static const struct parse_data ssid_fiel - #ifdef CONFIG_MESH - { INT_RANGE(mode, 0, 5) }, - { INT_RANGE(no_auto_peer, 0, 1) }, -+ { INT_RANGE(mesh_fwding, 0, 1) }, - { INT_RANGE(mesh_rssi_threshold, -255, 1) }, - #else /* CONFIG_MESH */ - { INT_RANGE(mode, 0, 4) }, -@@ -3106,6 +3107,7 @@ void wpa_config_set_network_defaults(str - ssid->dot11MeshRetryTimeout = DEFAULT_MESH_RETRY_TIMEOUT; - ssid->dot11MeshConfirmTimeout = DEFAULT_MESH_CONFIRM_TIMEOUT; - ssid->dot11MeshHoldingTimeout = DEFAULT_MESH_HOLDING_TIMEOUT; -+ ssid->mesh_fwding = DEFAULT_MESH_FWDING; - ssid->mesh_rssi_threshold = DEFAULT_MESH_RSSI_THRESHOLD; - #endif /* CONFIG_MESH */ - #ifdef CONFIG_HT_OVERRIDES -@@ -4347,6 +4349,7 @@ struct wpa_config * wpa_config_alloc_emp - config->user_mpm = DEFAULT_USER_MPM; - config->max_peer_links = DEFAULT_MAX_PEER_LINKS; - config->mesh_max_inactivity = DEFAULT_MESH_MAX_INACTIVITY; -+ config->mesh_fwding = DEFAULT_MESH_FWDING; - config->dot11RSNASAERetransPeriod = - DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD; - config->fast_reauth = DEFAULT_FAST_REAUTH; -@@ -5047,6 +5050,7 @@ static const struct global_parse_data gl - { INT(user_mpm), 0 }, - { INT_RANGE(max_peer_links, 0, 255), 0 }, - { INT(mesh_max_inactivity), 0 }, -+ { INT_RANGE(mesh_fwding, 0, 1), 0 }, - { INT(dot11RSNASAERetransPeriod), 0 }, - #endif /* CONFIG_MESH */ - { INT(disable_scan_offload), 0 }, ---- a/wpa_supplicant/config.h -+++ b/wpa_supplicant/config.h -@@ -18,6 +18,7 @@ - #define DEFAULT_USER_MPM 1 - #define DEFAULT_MAX_PEER_LINKS 99 - #define DEFAULT_MESH_MAX_INACTIVITY 300 -+#define DEFAULT_MESH_FWDING 1 - /* - * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard, - * but use 1000 ms in practice to avoid issues on low power CPUs. -@@ -1378,6 +1379,14 @@ struct wpa_config { - int mesh_max_inactivity; - - /** -+ * mesh_fwding - Mesh network layer-2 forwarding -+ * -+ * This controls whether to enable layer-2 forwarding. -+ * By default: 1: enabled -+ */ -+ int mesh_fwding; -+ -+ /** - * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame - * - * This timeout value is used in mesh STA to retransmit ---- a/wpa_supplicant/config_file.c -+++ b/wpa_supplicant/config_file.c -@@ -768,6 +768,7 @@ static void wpa_config_write_network(FIL - #endif /* IEEE8021X_EAPOL */ - INT(mode); - INT(no_auto_peer); -+ INT(mesh_fwding); - INT(frequency); - INT(enable_edmg); - INT(edmg_channel); -@@ -1449,6 +1450,9 @@ static void wpa_config_write_global(FILE - fprintf(f, "mesh_max_inactivity=%d\n", - config->mesh_max_inactivity); - -+ if (config->mesh_fwding != DEFAULT_MESH_FWDING) -+ fprintf(f, "mesh_fwding=%d\n", config->mesh_fwding); -+ - if (config->dot11RSNASAERetransPeriod != - DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD) - fprintf(f, "dot11RSNASAERetransPeriod=%d\n", ---- a/wpa_supplicant/config_ssid.h -+++ b/wpa_supplicant/config_ssid.h -@@ -546,6 +546,11 @@ struct wpa_ssid { - int dot11MeshConfirmTimeout; /* msec */ - int dot11MeshHoldingTimeout; /* msec */ - -+ /** -+ * Mesh network layer-2 forwarding -+ */ -+ int mesh_fwding; -+ - int ht; - int ht40; - ---- a/wpa_supplicant/mesh.c -+++ b/wpa_supplicant/mesh.c -@@ -140,6 +140,7 @@ static struct mesh_conf * mesh_config_cr - conf->mesh_cc_id = 0; - conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET; - conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0; -+ conf->mesh_fwding = ssid->mesh_fwding; - conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries; - conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout; - conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout; -@@ -441,6 +442,7 @@ static int wpa_supplicant_mesh_init(stru - bss->conf->start_disabled = 1; - bss->conf->mesh = MESH_ENABLED; - bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity; -+ bss->conf->mesh_fwding = wpa_s->conf->mesh_fwding; - - if (ieee80211_is_dfs(ssid->frequency, wpa_s->hw.modes, - wpa_s->hw.num_modes) && wpa_s->conf->country[0]) { -@@ -655,6 +657,10 @@ int wpa_supplicant_join_mesh(struct wpa_ - } - params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity; - -+ /* always explicitely set forwarding to on or off for now */ -+ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_FORWARDING; -+ params->conf.forwarding = ssid->mesh_fwding; -+ - os_free(wpa_s->mesh_params); - wpa_s->mesh_params = params; - if (wpa_supplicant_mesh_init(wpa_s, ssid, ¶ms->freq)) { ---- a/wpa_supplicant/mesh_mpm.c -+++ b/wpa_supplicant/mesh_mpm.c -@@ -303,9 +303,9 @@ static void mesh_mpm_send_plink_action(s - info = (bss->num_plinks > 63 ? 63 : bss->num_plinks) << 1; - /* TODO: Add Connected to Mesh Gate/AS subfields */ - wpabuf_put_u8(buf, info); -- /* always forwarding & accepting plinks for now */ -+ /* set forwarding & always accepting plinks for now */ - wpabuf_put_u8(buf, MESH_CAP_ACCEPT_ADDITIONAL_PEER | -- MESH_CAP_FORWARDING); -+ (conf->mesh_fwding ? MESH_CAP_FORWARDING : 0)); - } else { /* Peer closing frame */ - /* IE: Mesh ID */ - wpabuf_put_u8(buf, WLAN_EID_MESH_ID); ---- a/wpa_supplicant/wpa_supplicant.conf -+++ b/wpa_supplicant/wpa_supplicant.conf -@@ -150,6 +150,9 @@ ap_scan=1 - # This timeout value is used in mesh STA to clean up inactive stations. - #mesh_max_inactivity=300 - -+# Enable 802.11s layer-2 routing and forwarding -+#mesh_fwding=1 -+ - # cert_in_cb - Whether to include a peer certificate dump in events - # This controls whether peer certificates for authentication server and - # its certificate chain are included in EAP peer certificate events. This is diff --git a/package/network/services/hostapd/patches/301-mesh-noscan.patch b/package/network/services/hostapd/patches/301-mesh-noscan.patch index 0d78329441..e593ac49fe 100644 --- a/package/network/services/hostapd/patches/301-mesh-noscan.patch +++ b/package/network/services/hostapd/patches/301-mesh-noscan.patch @@ -10,7 +10,7 @@ { STR(id_str) }, --- a/wpa_supplicant/config_file.c +++ b/wpa_supplicant/config_file.c -@@ -768,6 +768,7 @@ static void wpa_config_write_network(FIL +@@ -769,6 +769,7 @@ static void wpa_config_write_network(FIL #endif /* IEEE8021X_EAPOL */ INT(mode); INT(no_auto_peer); @@ -20,7 +20,7 @@ INT(enable_edmg); --- a/wpa_supplicant/mesh.c +++ b/wpa_supplicant/mesh.c -@@ -474,6 +474,8 @@ static int wpa_supplicant_mesh_init(stru +@@ -506,6 +506,8 @@ static int wpa_supplicant_mesh_init(stru frequency); goto out_free; } @@ -31,14 +31,17 @@ /* --- a/wpa_supplicant/wpa_supplicant.c +++ b/wpa_supplicant/wpa_supplicant.c -@@ -2384,12 +2384,12 @@ void ibss_mesh_setup_freq(struct wpa_sup +@@ -2436,7 +2436,7 @@ void ibss_mesh_setup_freq(struct wpa_sup int ieee80211_mode = wpas_mode_to_ieee80211_mode(ssid->mode); enum hostapd_hw_mode hw_mode; struct hostapd_hw_modes *mode = NULL; - int ht40plus[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157, + int ht40plus[] = { 1, 2, 3, 4, 5, 6, 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157, 184, 192 }; - int vht80[] = { 36, 52, 100, 116, 132, 149 }; + int bw80[] = { 5180, 5260, 5500, 5580, 5660, 5745, 5955, + 6035, 6115, 6195, 6275, 6355, 6435, 6515, +@@ -2444,7 +2444,7 @@ void ibss_mesh_setup_freq(struct wpa_sup + int bw160[] = { 5955, 6115, 6275, 6435, 6595, 6755, 6915 }; struct hostapd_channel_data *pri_chan = NULL, *sec_chan = NULL; u8 channel; - int i, chan_idx, ht40 = -1, res, obss_scan = 1; @@ -46,7 +49,7 @@ unsigned int j, k; struct hostapd_freq_params vht_freq; int chwidth, seg0, seg1; -@@ -2473,7 +2473,7 @@ void ibss_mesh_setup_freq(struct wpa_sup +@@ -2535,7 +2535,7 @@ void ibss_mesh_setup_freq(struct wpa_sup #endif /* CONFIG_HE_OVERRIDES */ /* Setup higher BW only for 5 GHz */ @@ -57,7 +60,7 @@ for (chan_idx = 0; chan_idx < mode->num_channels; chan_idx++) { --- a/wpa_supplicant/config_ssid.h +++ b/wpa_supplicant/config_ssid.h -@@ -971,6 +971,8 @@ struct wpa_ssid { +@@ -979,6 +979,8 @@ struct wpa_ssid { */ int no_auto_peer; diff --git a/package/network/services/hostapd/patches/470-survey_data_fallback.patch b/package/network/services/hostapd/patches/470-survey_data_fallback.patch index efd82599d3..359b5f3ef8 100644 --- a/package/network/services/hostapd/patches/470-survey_data_fallback.patch +++ b/package/network/services/hostapd/patches/470-survey_data_fallback.patch @@ -1,26 +1,6 @@ --- a/src/ap/acs.c +++ b/src/ap/acs.c -@@ -302,18 +302,12 @@ static void acs_fail(struct hostapd_ifac - static long double - acs_survey_interference_factor(struct freq_survey *survey, s8 min_nf) - { -- long double factor, busy, total; -+ long double factor, busy = 0, total; - - if (survey->filled & SURVEY_HAS_CHAN_TIME_BUSY) - busy = survey->channel_time_busy; - else if (survey->filled & SURVEY_HAS_CHAN_TIME_RX) - busy = survey->channel_time_rx; -- else { -- /* This shouldn't really happen as survey data is checked in -- * acs_sanity_check() */ -- wpa_printf(MSG_ERROR, "ACS: Survey data missing"); -- return 0; -- } - - total = survey->channel_time; - -@@ -422,20 +416,19 @@ static int acs_usable_bw160_chan(const s +@@ -420,20 +420,19 @@ static int acs_usable_bw160_chan(const s static int acs_survey_is_sufficient(struct freq_survey *survey) { if (!(survey->filled & SURVEY_HAS_NF)) { diff --git a/package/network/services/hostapd/patches/550-WNM-allow-specifying-dialog-token.patch b/package/network/services/hostapd/patches/550-WNM-allow-specifying-dialog-token.patch deleted file mode 100644 index 6c080adc0e..0000000000 --- a/package/network/services/hostapd/patches/550-WNM-allow-specifying-dialog-token.patch +++ /dev/null @@ -1,99 +0,0 @@ -From 1b26807938815d0b0b266caf31d8ef0019607e64 Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Mon, 27 Sep 2021 15:41:48 +0200 -Subject: [PATCH] WNM: allow specifying dialog-token - -This commit adds the ability to specify the dialog token of a WNM BSS -Transition request frame via the hostapd control socket. - -FOr this, the new 'dialog_token' option can be used. It accepts values -as a 8 bit unsigned integer. If not specified, the dialog token is set -to 1 like before. - -Signed-off-by: David Bauer ---- - hostapd/ctrl_iface.c | 10 ++++++++-- - src/ap/wnm_ap.c | 11 ++++++----- - src/ap/wnm_ap.h | 4 ++-- - 3 files changed, 16 insertions(+), 9 deletions(-) - ---- a/hostapd/ctrl_iface.c -+++ b/hostapd/ctrl_iface.c -@@ -897,7 +897,7 @@ static int hostapd_ctrl_iface_bss_tm_req - const char *pos, *end; - int disassoc_timer = 0; - struct sta_info *sta; -- u8 req_mode = 0, valid_int = 0x01; -+ u8 req_mode = 0, valid_int = 0x01, dialog_token = 0x01; - u8 bss_term_dur[12]; - char *url = NULL; - int ret; -@@ -935,6 +935,12 @@ static int hostapd_ctrl_iface_bss_tm_req - valid_int = atoi(pos); - } - -+ pos = os_strstr(cmd, " dialog_token="); -+ if (pos) { -+ pos += 14; -+ dialog_token = atoi(pos); -+ } -+ - pos = os_strstr(cmd, " bss_term="); - if (pos) { - pos += 10; -@@ -1041,7 +1047,7 @@ static int hostapd_ctrl_iface_bss_tm_req - #endif /* CONFIG_MBO */ - - ret = wnm_send_bss_tm_req(hapd, sta, req_mode, disassoc_timer, -- valid_int, bss_term_dur, url, -+ valid_int, bss_term_dur, dialog_token, url, - nei_len ? nei_rep : NULL, nei_len, - mbo_len ? mbo : NULL, mbo_len); - #ifdef CONFIG_MBO ---- a/src/ap/wnm_ap.c -+++ b/src/ap/wnm_ap.c -@@ -788,8 +788,8 @@ int wnm_send_ess_disassoc_imminent(struc - - int wnm_send_bss_tm_req(struct hostapd_data *hapd, struct sta_info *sta, - u8 req_mode, int disassoc_timer, u8 valid_int, -- const u8 *bss_term_dur, const char *url, -- const u8 *nei_rep, size_t nei_rep_len, -+ const u8 *bss_term_dur, u8 dialog_token, -+ const char *url, const u8 *nei_rep, size_t nei_rep_len, - const u8 *mbo_attrs, size_t mbo_len) - { - u8 *buf, *pos; -@@ -797,8 +797,9 @@ int wnm_send_bss_tm_req(struct hostapd_d - size_t url_len; - - wpa_printf(MSG_DEBUG, "WNM: Send BSS Transition Management Request to " -- MACSTR " req_mode=0x%x disassoc_timer=%d valid_int=0x%x", -- MAC2STR(sta->addr), req_mode, disassoc_timer, valid_int); -+ MACSTR " req_mode=0x%x disassoc_timer=%d valid_int=0x%x " -+ "dialog_token=%x", -+ MAC2STR(sta->addr), req_mode, disassoc_timer, valid_int, dialog_token); - buf = os_zalloc(1000 + nei_rep_len + mbo_len); - if (buf == NULL) - return -1; -@@ -810,7 +811,7 @@ int wnm_send_bss_tm_req(struct hostapd_d - os_memcpy(mgmt->bssid, hapd->own_addr, ETH_ALEN); - mgmt->u.action.category = WLAN_ACTION_WNM; - mgmt->u.action.u.bss_tm_req.action = WNM_BSS_TRANS_MGMT_REQ; -- mgmt->u.action.u.bss_tm_req.dialog_token = 1; -+ mgmt->u.action.u.bss_tm_req.dialog_token = dialog_token; - mgmt->u.action.u.bss_tm_req.req_mode = req_mode; - mgmt->u.action.u.bss_tm_req.disassoc_timer = - host_to_le16(disassoc_timer); ---- a/src/ap/wnm_ap.h -+++ b/src/ap/wnm_ap.h -@@ -20,8 +20,8 @@ int wnm_send_ess_disassoc_imminent(struc - int disassoc_timer); - int wnm_send_bss_tm_req(struct hostapd_data *hapd, struct sta_info *sta, - u8 req_mode, int disassoc_timer, u8 valid_int, -- const u8 *bss_term_dur, const char *url, -- const u8 *nei_rep, size_t nei_rep_len, -+ const u8 *bss_term_dur, u8 dialog_token, -+ const char *url, const u8 *nei_rep, size_t nei_rep_len, - const u8 *mbo_attrs, size_t mbo_len); - void ap_sta_reset_steer_flag_timer(void *eloop_ctx, void *timeout_ctx); - int wnm_send_coloc_intf_req(struct hostapd_data *hapd, struct sta_info *sta, diff --git a/package/network/services/hostapd/patches/720-ACS-fix-channel-100-frequency.patch b/package/network/services/hostapd/patches/720-ACS-fix-channel-100-frequency.patch deleted file mode 100644 index 3ef19e5298..0000000000 --- a/package/network/services/hostapd/patches/720-ACS-fix-channel-100-frequency.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 5a24286ed6315e1fef755ca1970792554f59b1fc Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Wed, 26 May 2021 22:15:35 +0200 -Subject: [PATCH] ACS: fix channel 100 frequency - -Channel 100 is a valid channel to choose for 80MHz operation. However, -it's assigned to 5500 MHz, not 5550MHz. In fact, there is no channel -assigned to this frequency. - -Fix this obbvious typo to allow ACS to select channel 100 for 80 MHz -operation again. - -Fixes commit bef5eee4f7b2 ("Convert channel to frequency based selection for AP mode ACS") - -Signed-off-by: David Bauer ---- - src/ap/acs.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/src/ap/acs.c -+++ b/src/ap/acs.c -@@ -386,7 +386,7 @@ static int acs_usable_bw40_chan(const st - - static int acs_usable_bw80_chan(const struct hostapd_channel_data *chan) - { -- const int allowed[] = { 5180, 5260, 5550, 5580, 5660, 5745, 5955, 6035, -+ const int allowed[] = { 5180, 5260, 5500, 5580, 5660, 5745, 5955, 6035, - 6115, 6195, 6275, 6355, 6435, 6515, 6595, 6675, - 6755, 6835, 6915, 6995 }; - unsigned int i; diff --git a/package/network/services/hostapd/patches/741-proxyarp-fix-compilation-with-Hotspot-2.0-disabled.patch b/package/network/services/hostapd/patches/741-proxyarp-fix-compilation-with-Hotspot-2.0-disabled.patch deleted file mode 100644 index 657ef5f2ed..0000000000 --- a/package/network/services/hostapd/patches/741-proxyarp-fix-compilation-with-Hotspot-2.0-disabled.patch +++ /dev/null @@ -1,51 +0,0 @@ -From ad694836b2ded6b97b426bf331627537cdbff591 Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Thu, 19 Aug 2021 00:52:04 +0200 -Subject: [PATCH] proxyarp: fix compilation with Hotspot 2.0 disabled - -The disable_dgaf config fiels is only available in case Hostapd is -compiled with Hotspot 2.0 support, however Proxy-ARP does not depend on -Hotspot 2.0. - -Only add the code related to this config field when Hotspot 2.0 is -enabled to fix compilation with the aformentioned preconditions. - -Signed-off-by: David Bauer ---- - src/ap/dhcp_snoop.c | 2 ++ - src/ap/ndisc_snoop.c | 2 ++ - 2 files changed, 4 insertions(+) - ---- a/src/ap/dhcp_snoop.c -+++ b/src/ap/dhcp_snoop.c -@@ -88,6 +88,7 @@ static void handle_dhcp(void *ctx, const - } - } - -+#ifdef CONFIG_HS20 - if (hapd->conf->disable_dgaf && is_broadcast_ether_addr(buf)) { - for (sta = hapd->sta_list; sta; sta = sta->next) { - if (!(sta->flags & WLAN_STA_AUTHORIZED)) -@@ -96,6 +97,7 @@ static void handle_dhcp(void *ctx, const - (u8 *) buf, len); - } - } -+#endif - - if (msgtype == DHCPACK) { - if (b->your_ip == 0) ---- a/src/ap/ndisc_snoop.c -+++ b/src/ap/ndisc_snoop.c -@@ -151,10 +151,12 @@ static void handle_ndisc(void *ctx, cons - return; - } - break; -+#ifdef CONFIG_HS20 - case ROUTER_ADVERTISEMENT: - if (hapd->conf->disable_dgaf) - ucast_to_stas(hapd, buf, len); - break; -+#endif - case NEIGHBOR_ADVERTISEMENT: - if (hapd->conf->na_mcast_to_ucast) - ucast_to_stas(hapd, buf, len); diff --git a/package/network/services/hostapd/src/src/ap/ubus.c b/package/network/services/hostapd/src/src/ap/ubus.c index 5855b25794..fdc2a3fd26 100644 --- a/package/network/services/hostapd/src/src/ap/ubus.c +++ b/package/network/services/hostapd/src/src/ap/ubus.c @@ -1229,7 +1229,7 @@ hostapd_rrm_nr_set(struct ubus_context *ctx, struct ubus_object *obj, memcpy(&ssid, s, ssid.ssid_len); } - hostapd_neighbor_set(hapd, bssid, &ssid, data, NULL, NULL, 0); + hostapd_neighbor_set(hapd, bssid, &ssid, data, NULL, NULL, 0, 0); wpabuf_free(data); continue;