From: Adrian Schmutzler Date: Thu, 1 Oct 2020 19:15:47 +0000 (+0200) Subject: ipq40xx: remove model name from LED labels X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ad90a42e48756e2de27a1ebad942fd18e9411713;p=openwrt%2Fstaging%2Fzorun.git ipq40xx: remove model name from LED labels Like in the previous patches for ath79 and ramips, this will remove the "devicename" from LED labels in ipq40xx. The devicename is removed in DTS files and 01_leds, and a migration script is added. While at it, also harmonize capitalization of wlan2G/wlan5G vs. wlan2g/wlan5g. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ipq40xx/base-files/etc/board.d/01_leds b/target/linux/ipq40xx/base-files/etc/board.d/01_leds index e8e67af3a9..8a87b68532 100755 --- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds +++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds @@ -8,68 +8,64 @@ board_config_update board=$(board_name) -boardname="${board##*,}" case "$board" in alfa-network,ap120c-ac) - ucidef_set_led_netdev "wan" "WAN" "${boardname}:amber:wan" "eth1" + ucidef_set_led_netdev "wan" "WAN" "amber:wan" "eth1" ;; asus,rt-ac58u) - ucidef_set_led_netdev "wan" "WAN" "${boardname}:blue:wan" "eth1" - ucidef_set_led_switch "lan" "LAN" "${boardname}:blue:lan" "switch0" "0x1e" + ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1" + ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x1e" ;; avm,fritzbox-4040) - ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt" - ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1" - ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e" + ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt" + ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" + ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e" ;; avm,fritzbox-7530 |\ glinet,gl-b1300) - ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:green:wlan" "phy0tpt" + ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" + ;; +edgecore,ecw5211 |\ +zyxel,nbg6617 |\ +zyxel,wre6606) + ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt" ;; edgecore,oap100) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:blue:wlan5g" "phy1tpt" + ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt" ;; engenius,eap1300) - ucidef_set_led_netdev "lan" "LAN" "${boardname}:blue:lan" "eth0" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:yellow:wlan5g" "phy1tpt" - ucidef_set_led_default "mesh" "MESH" "${boardname}:blue:mesh" "0" + ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0" + ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "yellow:wlan5g" "phy1tpt" + ucidef_set_led_default "mesh" "MESH" "blue:mesh" "0" ;; engenius,eap2200) - ucidef_set_led_netdev "lan1" "LAN1" "${boardname}:blue:lan1" "eth0" - ucidef_set_led_netdev "lan2" "LAN2" "${boardname}:blue:lan2" "eth1" + ucidef_set_led_netdev "lan1" "LAN1" "blue:lan1" "eth0" + ucidef_set_led_netdev "lan2" "LAN2" "blue:lan2" "eth1" ;; engenius,ens620ext) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2G" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5G" "phy1tpt" - ucidef_set_led_netdev "lan1" "LAN1" "${boardname}:green:lan1" "eth0" - ucidef_set_led_netdev "lan2" "LAN2" "${boardname}:green:lan2" "eth1" + ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt" + ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0" + ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1" ;; mobipromo,cm520-79f) - ucidef_set_led_netdev "wan" "WAN" "${boardname}:blue:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "${boardname}:blue:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "${boardname}:blue:lan2" "switch0" "0x08" + ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1" + ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10" + ucidef_set_led_switch "lan2" "LAN2" "blue:lan2" "switch0" "0x08" ;; netgear,ex6100v2 |\ netgear,ex6150v2) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "ex61x0v2:green:router" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "ex61x0v2:green:client" "phy1tpt" + ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:router" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:client" "phy1tpt" ;; qxwlan,e2600ac-c1 |\ qxwlan,e2600ac-c2) - ucidef_set_led_wlan "wlan2g" "WLAN0" "e2600ac:green:wlan0" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN1" "e2600ac:green:wlan1" "phy1tpt" - ;; -zyxel,nbg6617) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2G" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5G" "phy1tpt" - ;; -edgecore,ecw5211 |\ -zyxel,wre6606) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5g" "phy1tpt" + ucidef_set_led_wlan "wlan2g" "WLAN0" "green:wlan0" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN1" "green:wlan1" "phy1tpt" ;; esac diff --git a/target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration b/target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration new file mode 100644 index 0000000000..c4f82b35dc --- /dev/null +++ b/target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration @@ -0,0 +1,19 @@ +. /lib/functions/migrations.sh + +board=$(board_name) + +case "$board" in +engenius,emr3500) + migrate_leds "emr3500:=" + ;; +engenius,ens620ext|\ +zyxel,nbg6617) + migrate_leds ":wlan2G=:wlan2g" ":wlan5G=:wlan5g" + ;; +esac + +remove_devicename_leds + +migrations_apply system + +exit 0 diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts index 33c44a8097..d866f8dd1a 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts @@ -105,18 +105,18 @@ compatible = "gpio-leds"; red { - label = "a42:red:status"; + label = "red:status"; gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-off"; }; power: green { - label = "a42:green:status"; + label = "green:status"; gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; }; blue { - label = "a42:blue:status"; + label = "blue:status"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-off"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts index e21c40cae0..28d27d9959 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts @@ -30,24 +30,24 @@ compatible = "gpio-leds"; status: status { - label = "ap120c-ac:blue:status"; + label = "blue:status"; gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; default-state = "keep"; }; wan { - label = "ap120c-ac:amber:wan"; + label = "amber:wan"; gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>; }; wlan2g { - label = "ap120c-ac:green:wlan2g"; + label = "green:wlan2g"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wlan5g { - label = "ap120c-ac:red:wlan5g"; + label = "red:wlan5g"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts index 2ca2acee19..062826c7a4 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts @@ -78,17 +78,17 @@ compatible = "gpio-leds"; led_status_red: status_red { - label = "cs-w3-wd1200g-eup:red:status"; + label = "red:status"; gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; }; led_status_green: status_green { - label = "cs-w3-wd1200g-eup:green:status"; + label = "green:status"; gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; }; led_status_blue: status_blue { - label = "cs-w3-wd1200g-eup:blue:status"; + label = "blue:status"; gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts index 17d9215544..e3afddb376 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts @@ -67,12 +67,12 @@ compatible = "gpio-leds"; led_red: red { - label = "dap-2610:red:power"; + label = "red:power"; gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; }; led_green: green { - label = "dap-2610:green:power"; + label = "green:power"; gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts index 2f9a890485..cfaba0f411 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts @@ -98,7 +98,7 @@ compatible = "gpio-leds"; power: status { - label = "EA6350v3:green:status"; + label = "green:status"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts index 32fded4c0e..f08ddd0abe 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts @@ -78,27 +78,27 @@ compatible = "gpio-leds"; power: orange { - label = "eap1300:orange:power"; + label = "orange:power"; gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; lan { - label = "eap1300:blue:lan"; + label = "blue:lan"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; }; mesh { - label = "eap1300:blue:mesh"; + label = "blue:mesh"; gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; }; wlan2g { - label = "eap1300:blue:wlan2g"; + label = "blue:wlan2g"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; wlan5g { - label = "eap1300:yellow:wlan5g"; + label = "yellow:wlan5g"; gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts index 3f7e2ad6fd..244dfac750 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts @@ -32,17 +32,17 @@ compatible = "gpio-leds"; led_power: power { - label = "ecw5211:yellow:power"; + label = "yellow:power"; gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; }; wlan2g { - label = "ecw5211:green:wlan2g"; + label = "green:wlan2g"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; wlan5g { - label = "ecw5211:green:wlan5g"; + label = "green:wlan5g"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts index cf4f793f21..b405867134 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts @@ -81,24 +81,24 @@ compatible = "gpio-leds"; led_power: power { - label = "emd1:white:power"; + label = "white:power"; gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; wlan2g { - label = "emd1:red:wlan2g"; + label = "red:wlan2g"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wlan5g { - label = "emd1:blue:wlan5g"; + label = "blue:wlan5g"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; mesh { - label = "emd1:orange:mesh"; + label = "orange:mesh"; gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts index 50067aaa91..848e5c2363 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts @@ -82,22 +82,22 @@ compatible = "gpio-leds"; power: white { - label = "emr3500:white:power"; + label = "white:power"; gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; }; blue { - label = "emr3500:blue"; + label = "blue"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; }; red { - label = "emr3500:red"; + label = "red"; gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; }; orange { - label = "emr3500:orange"; + label = "orange"; gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts index 8636b18b2e..b765d68b51 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts @@ -92,27 +92,27 @@ compatible = "gpio-leds"; power: power { - label = "ens620ext:amber:power"; + label = "amber:power"; gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; lan1 { - label = "ens620ext:green:lan1"; + label = "green:lan1"; gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; }; lan2 { - label = "ens620ext:green:lan2"; + label = "green:lan2"; gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; }; - wlan2G { - label = "ens620ext:green:wlan2G"; + wlan2g { + label = "green:wlan2g"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; - wlan5G { - label = "ens620ext:green:wlan5G"; + wlan5g { + label = "green:wlan5g"; gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi index cc70080c92..c026f70d05 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi @@ -120,47 +120,47 @@ compatible = "gpio-leds"; power_amber: power_amber { - label = "ex61x0v2:amber:power"; + label = "amber:power"; gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; }; power_green: power_green { - label = "ex61x0v2:green:power"; + label = "green:power"; gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; }; right { - label = "ex61x0v2:blue:right"; + label = "blue:right"; gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; }; left { - label = "ex61x0v2:blue:left"; + label = "blue:left"; gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; }; client_green { - label = "ex61x0v2:green:client"; + label = "green:client"; gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; }; client_red { - label = "ex61x0v2:red:client"; + label = "red:client"; gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; }; router_green { - label = "ex61x0v2:green:router"; + label = "green:router"; gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; }; router_red { - label = "ex61x0v2:red:router"; + label = "red:router"; gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; }; wps { - label = "ex61x0v2:green:wps"; + label = "green:wps"; gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts index b2a32946d9..fb1762cc05 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts @@ -109,33 +109,33 @@ compatible = "gpio-leds"; wlan { - label = "fritz4040:green:wlan"; + label = "green:wlan"; gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>; }; panic: info_red { - label = "fritz4040:red:info"; + label = "red:info"; gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>; panic-indicator; }; wan { - label = "fritz4040:green:wan"; + label = "green:wan"; gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>; }; power: power { - label = "fritz4040:green:power"; + label = "green:power"; gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>; }; lan { - label = "fritz4040:green:lan"; + label = "green:lan"; gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>; }; flash: info_amber { - label = "fritz4040:amber:info"; + label = "amber:info"; gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts index 2e21b55325..62ba76802d 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts @@ -74,7 +74,7 @@ compatible = "gpio-leds"; led_status: status { - label = "meshpoint-one:blue:status"; + label = "blue:status"; gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts index a8c144f928..4d17325c8d 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts @@ -142,29 +142,29 @@ pinctrl-names = "default"; power: power { - label = "nbg6617:green:power"; + label = "green:power"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; usb { - label = "nbg6617:green:usb"; + label = "green:usb"; gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; linux,default-trigger = "usbport"; }; - wlan2G { - label = "nbg6617:green:wlan2G"; + wlan2g { + label = "green:wlan2g"; gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; }; - wlan5G { - label = "nbg6617:green:wlan5G"; + wlan5g { + label = "green:wlan5g"; gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; }; wps { - label = "nbg6617:green:wps"; + label = "green:wps"; gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts index a0030f77ce..bd0c6b71df 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts @@ -118,36 +118,36 @@ compatible = "gpio-leds"; led_power: status { - label = "rt-ac58u:blue:status"; + label = "blue:status"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; wan { - label = "rt-ac58u:blue:wan"; + label = "blue:wan"; gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; }; wlan2G { - label = "rt-ac58u:blue:wlan2G"; + label = "blue:wlan2G"; gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wlan5G { - label = "rt-ac58u:blue:wlan5G"; + label = "blue:wlan5G"; gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; usb { - label = "rt-ac58u:blue:usb"; + label = "blue:usb"; gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; trigger-sources = <&usb3_port1>, <&usb3_port2>; linux,default-trigger = "usbport"; }; lan { - label = "rt-ac58u:blue:lan"; + label = "blue:lan"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts index 5932638da0..8fa5a31908 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts @@ -88,32 +88,32 @@ compatible = "gpio-leds"; wps { - label = "wre6606:green:wps"; + label = "green:wps"; gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; }; wlan5g_green { - label = "wre6606:green:wlan5g"; + label = "green:wlan5g"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; power: power { - label = "wre6606:green:power"; + label = "green:power"; gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; }; wlan5g_red { - label = "wre6606:red:wlan5g"; + label = "red:wlan5g"; gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; }; wlan2g_red { - label = "wre6606:red:wlan2g"; + label = "red:wlan2g"; gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; }; wlan2g_green { - label = "wre6606:green:wlan2g"; + label = "green:wlan2g"; gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts index 25bbd6b332..4c14f41b34 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts @@ -108,18 +108,18 @@ compatible = "gpio-leds"; red { - label = "a62:red:status"; + label = "red:status"; gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-off"; }; power: green { - label = "a62:green:status"; + label = "green:status"; gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; }; blue { - label = "a62:blue:status"; + label = "blue:status"; gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-off"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts index 0a15f003d1..167094d4a2 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts @@ -130,40 +130,40 @@ compatible = "gpio-leds"; usb { - label = "cm520-79f:blue:usb"; + label = "blue:usb"; gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "usbport"; trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>; }; led_sys: can { - label = "cm520-79f:blue:can"; + label = "blue:can"; gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; }; wan { - label = "cm520-79f:blue:wan"; + label = "blue:wan"; gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; }; lan1 { - label = "cm520-79f:blue:lan1"; + label = "blue:lan1"; gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; }; lan2 { - label = "cm520-79f:blue:lan2"; + label = "blue:lan2"; gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; }; wlan2g { - label = "cm520-79f:blue:wlan2g"; + label = "blue:wlan2g"; gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wlan5g { - label = "cm520-79f:blue:wlan5g"; + label = "blue:wlan5g"; gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi index f4af2ba25f..57d607849a 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi @@ -132,34 +132,34 @@ compatible = "gpio-leds"; led1 { - label = "e2600ac:green:wlan0"; + label = "green:wlan0"; gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; }; led2 { - label = "e2600ac:green:wlan1"; + label = "green:wlan1"; gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; }; led3 { - label = "e2600ac:green:usb"; + label = "green:usb"; gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; linux,default-trigger = "usbport"; }; led4 { - label = "e2600ac:green:ctrl1"; + label = "green:ctrl1"; gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; }; led5 { - label = "e2600ac:green:ctrl2"; + label = "green:ctrl2"; gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; }; led6 { - label = "e2600ac:green:ctrl3"; + label = "green:ctrl3"; gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts index d8acf36c4a..5a738da33d 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts @@ -24,35 +24,35 @@ // Front panel LEDs, top to bottom led_plug: diag { - label = "ea8300:amber:plug"; + label = "amber:plug"; gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; }; led_world: internet { - label = "ea8300:amber:world"; + label = "amber:world"; gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; }; led_wps: wps { - label = "ea8300:white:wps"; + label = "white:wps"; gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; }; led_wps_amber: wps_amber { - label = "ea8300:amber:wps"; + label = "amber:wps"; gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; panic-indicator; }; led_linksys: pwr { - label = "ea8300:white:linksys"; + label = "white:linksys"; gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; }; // On back panel, above USB socket led_usb: usb { - label = "ea8300:green:usb"; + label = "green:usb"; gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts index ec3ce447cc..95e616695c 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts @@ -29,40 +29,40 @@ compatible = "gpio-leds"; led_power: power { - label = "eap2200:amber:power"; + label = "amber:power"; gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; }; lan1 { - label = "eap2200:blue:lan1"; + label = "blue:lan1"; gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; }; lan2 { - label = "eap2200:blue:lan2"; + label = "blue:lan2"; gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; }; wlan2g { - label = "eap2200:blue:wlan2g"; + label = "blue:wlan2g"; gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wlan5g { - label = "eap2200:yellow:wlan5g"; + label = "yellow:wlan5g"; gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; wlan5g2 { - label = "eap2200:yellow:wlan5g2"; + label = "yellow:wlan5g2"; gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy2tpt"; }; mode { - label = "eap2200:blue:mode"; + label = "blue:mode"; gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts index b04a61dc04..dcd336e712 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts @@ -101,32 +101,32 @@ compatible = "gpio-leds"; info_red: info_red { - label = "fritzbox-7530:red:info"; + label = "red:info"; gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; }; info_green: info { - label = "fritzbox-7530:green:info"; + label = "green:info"; gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; }; wlan { - label = "fritzbox-7530:green:wlan"; + label = "green:wlan"; gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; }; fon { - label = "fritzbox-7530:green:fon"; + label = "green:fon"; gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; }; power_green: power { - label = "fritzbox-7530:green:power"; + label = "green:power"; gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; }; wps { - label = "fritzbox-7530:green:wps"; + label = "green:wps"; gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts index e9b96b996a..3d90fdc286 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts @@ -82,17 +82,17 @@ compatible = "gpio-leds"; power_red: power_red { - label = "fritzwlan-1200:red:power"; + label = "red:power"; gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; }; power_green: power_green { - label = "fritzwlan-1200:green:power"; + label = "green:power"; gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; }; power_yellow { - label = "fritzwlan-1200:yellow:power"; + label = "yellow:power"; gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts index 6a132adade..2e4bfd69ba 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts @@ -82,22 +82,22 @@ compatible = "gpio-leds"; connect_red { - label = "fritzwlan-3000:red:connect"; + label = "red:connect"; gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; }; connect_green { - label = "fritzwlan-3000:green:connect"; + label = "green:connect"; gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; }; connect_blue { - label = "fritzwlan-3000:blue:connect"; + label = "blue:connect"; gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; }; power_led: power { - label = "fritzwlan-3000:green:power"; + label = "green:power"; gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts index 8fe7644a9b..49cf2cabfa 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts @@ -103,24 +103,24 @@ compatible = "gpio-leds"; led_status: status { - label = "habanero-dvk:green:status"; + label = "green:status"; gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; panic-indicator; }; led_upgrade: upgrade { - label = "habanero-dvk:green:upgrade"; + label = "green:upgrade"; gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; }; wlan2g { - label = "habanero-dvk:green:wlan2g"; + label = "green:wlan2g"; gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wlan5g { - label = "habanero-dvk:green:wlan5g"; + label = "green:wlan5g"; gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts index 92aaa927e2..5b86605daa 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts @@ -240,63 +240,63 @@ led_blue0: blue0 { chan-name = "blue0"; - label = "map-ac2200:blue:chan0"; + label = "blue:chan0"; led-cur = [fa]; max-cur = [ff]; }; blue1 { chan-name = "blue1"; - label = "map-ac2200:blue:chan1"; + label = "blue:chan1"; led-cur = [fa]; max-cur = [ff]; }; blue2 { chan-name = "blue2"; - label = "map-ac2200:blue:chan2"; + label = "blue:chan2"; led-cur = [fa]; max-cur = [ff]; }; led_green0: green0 { chan-name = "green0"; - label = "map-ac2200:green:chan0"; + label = "green:chan0"; led-cur = [fa]; max-cur = [ff]; }; green1 { chan-name = "green1"; - label = "map-ac2200:green:chan1"; + label = "green:chan1"; led-cur = [fa]; max-cur = [ff]; }; green2 { chan-name = "green2"; - label = "map-ac2200:green:chan2"; + label = "green:chan2"; led-cur = [fa]; max-cur = [ff]; }; led_red0: red0 { chan-name = "red0"; - label = "map-ac2200:red:chan0"; + label = "red:chan0"; led-cur = [fa]; max-cur = [ff]; }; red1 { chan-name = "red1"; - label = "map-ac2200:red:chan1"; + label = "red:chan1"; led-cur = [fa]; max-cur = [ff]; }; red2 { chan-name = "red2"; - label = "map-ac2200:red:chan2"; + label = "red:chan2"; led-cur = [fa]; max-cur = [ff]; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mr8300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mr8300.dts index a09730a9e8..057aa88028 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mr8300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mr8300.dts @@ -19,25 +19,25 @@ compatible = "gpio-leds"; led_red: red { - label = "mr8300:red:alarm"; + label = "red:alarm"; gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; }; led_amber: amber { - label = "mr8300:amber:programming"; + label = "amber:programming"; gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; panic-indicator; }; led_blue: blue { - label = "mr8300:blue:power"; + label = "blue:power"; gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; }; // On back panel, above USB socket led_usb: usb { - label = "mr8300:green:usb"; + label = "green:usb"; gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts index 2a92a5d80f..69423ce02b 100755 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts @@ -125,17 +125,17 @@ compatible = "gpio-leds"; led_system: led_system { - label = "oap100:green:system"; + label = "green:system"; gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; }; led_2g { - label = "oap100:blue:wlan2g"; + label = "blue:wlan2g"; gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; }; led_5g { - label = "oap100:blue:wlan5g"; + label = "blue:wlan5g"; gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts index 2f17424e55..0caa0255d0 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts @@ -48,72 +48,72 @@ led_power_blue: power_blue { gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:power"; + label = "blue:power"; default-state = "on"; }; led_power_red: power_red { gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:red:power"; + label = "red:power"; }; tp28 { gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; - label = "rtl30vw:ext:tp28"; + label = "ext:tp28"; default-state = "keep"; }; tp27 { gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; - label = "rtl30vw:ext:tp27"; + label = "ext:tp27"; default-state = "keep"; }; wlan2g { gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:wlan2g"; + label = "blue:wlan2g"; linux,default-trigger = "phy0tpt"; }; wlan5g { gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:wlan5g"; + label = "blue:wlan5g"; linux,default-trigger = "phy1tpt"; }; wps { gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:wps"; + label = "blue:wps"; }; voip { gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:voip"; + label = "blue:voip"; }; s1 { gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s1"; + label = "blue:s1"; }; s2 { gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s2"; + label = "blue:s2"; }; s3 { gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s3"; + label = "blue:s3"; }; s4 { gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s4"; + label = "blue:s4"; }; signal { gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:red:signal"; + label = "red:signal"; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi index c768e25ca0..4435d1fd28 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi @@ -110,7 +110,7 @@ pinctrl-names = "default"; led_status: led2 { - label = "u4019:green:led2"; + label = "green:led2"; gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts index 1977358525..cdf0cfe644 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts @@ -95,47 +95,47 @@ compatible = "gpio-leds"; led_power_white: power_white { - label = "wtr-m2133hp:white:power"; + label = "white:power"; gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; }; led_power_orange: power_orange { - label = "wtr-m2133hp:orange:power"; + label = "orange:power"; gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; }; led_power_blue: power_blue { - label = "wtr-m2133hp:blue:power"; + label = "blue:power"; gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>; }; router_white { - label = "wtr-m2133hp:white:router"; + label = "white:router"; gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; }; router_orange { - label = "wtr-m2133hp:orange:router"; + label = "orange:router"; gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; }; internet_white { - label = "wtr-m2133hp:white:internet"; + label = "white:internet"; gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>; }; internet_orange { - label = "wtr-m2133hp:orange:internet"; + label = "orange:internet"; gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; }; wireless_white { - label = "wtr-m2133hp:white:wireless"; + label = "white:wireless"; gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>; }; wireless_orange { - label = "wtr-m2133hp:orange:wireless"; + label = "orange:wireless"; gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts index 1bcf5e80bf..79f4c04edf 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts @@ -116,12 +116,12 @@ compatible = "gpio-leds"; status: rss4 { - label = "wpj428:green:rss4"; + label = "green:rss4"; gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; }; rss3 { - label = "wpj428:green:rss3"; + label = "green:rss3"; gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts index 00faa9840d..a3cecddd6e 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts @@ -18,24 +18,24 @@ compatible = "gpio-leds"; wifi_green { - label = "ap-303:green:wifi"; + label = "green:wifi"; gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wifi_amber { - label = "ap-303:amber:wifi"; + label = "amber:wifi"; gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; led_system_red: system_red { - label = "ap-303:red:system"; + label = "red:system"; gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; }; led_system_green: system_green { - label = "ap-303:green:system"; + label = "green:system"; gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts index c48bfb636a..707ed18e3b 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts @@ -108,34 +108,34 @@ compatible = "gpio-leds"; wifi_green { - label = "ap-303h:green:wifi"; + label = "green:wifi"; gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; wifi_amber { - label = "ap-303h:amber:wifi"; + label = "amber:wifi"; gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; pse { - label = "ap-303h:green:pse"; + label = "green:pse"; gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; }; led_system_red: system_red { - label = "ap-303h:red:system"; + label = "red:system"; gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; }; led_system_green: system_green { - label = "ap-303h:green:system"; + label = "green:system"; gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>; }; led_system_amber: system_amber { - label = "ap-303h:amber:system"; + label = "amber:system"; gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts index c743ac4b4d..1d4e50292e 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts @@ -18,17 +18,17 @@ compatible = "gpio-leds"; led_system_red: system_red { - label = "ap-365:red:system"; + label = "red:system"; gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; }; led_system_green: system_green { - label = "ap-365:green:system"; + label = "green:system"; gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; }; system_amber { - label = "ap-365:amber:system"; + label = "amber:system"; gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts index b32eb29f8c..a735d8e3ac 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts @@ -121,18 +121,18 @@ compatible = "gpio-leds"; power: power { - label = "gl-b1300:green:power"; + label = "green:power"; gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; default-state = "on"; }; mesh { - label = "gl-b1300:green:mesh"; + label = "green:mesh"; gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; }; wlan { - label = "gl-b1300:green:wlan"; + label = "green:wlan"; gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; }; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts index b18e2515a3..fa859b73a3 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts @@ -107,18 +107,18 @@ compatible = "gpio-leds"; led_power: power { - label = "gl-s1300:green:power"; + label = "green:power"; gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>; default-state = "on"; }; mesh { - label = "gl-s1300:green:mesh"; + label = "green:mesh"; gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>; }; wlan { - label = "gl-s1300:green:wlan"; + label = "green:wlan"; gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts index 71057c7577..36a01e5053 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts @@ -117,7 +117,7 @@ compatible = "gpio-leds"; power_orange: power { - label = "mr33:orange:power"; + label = "orange:power"; gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; panic-indicator; }; @@ -169,25 +169,25 @@ /* RGB led */ status_red: chan0 { - chan-name = "mr33:red:status"; + chan-name = "red:status"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; }; status_green: chan1 { - chan-name = "mr33:green:status"; + chan-name = "green:status"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; }; chan2 { - chan-name = "mr33:blue:status"; + chan-name = "blue:status"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; }; chan3 { - chan-name = "mr33:white:status"; + chan-name = "white:status"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; };