From: Yutang Jiang Date: Wed, 7 Dec 2016 16:07:42 +0000 (+0800) Subject: layerscape: add 64b/32b target for ls1046ardb device X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ad907e1c03a3a1a236f4836cee085d085f280c8d;p=openwrt%2Fstaging%2Frobimarko.git layerscape: add 64b/32b target for ls1046ardb device Add support for NXP layerscape ls1046ardb 64b/32b Dev board. LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot * USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port * UART: supports two UARTs up to 115200 bps for console Signed-off-by: Yutang Jiang --- diff --git a/package/boot/uboot-layerscape-32b/Makefile b/package/boot/uboot-layerscape-32b/Makefile index c4e6213ac7..f619186685 100644 --- a/package/boot/uboot-layerscape-32b/Makefile +++ b/package/boot/uboot-layerscape-32b/Makefile @@ -16,7 +16,7 @@ PKG_SOURCE_PROTO:=git PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION) PKG_SOURCE_URL:=https://github.com/fsl-jyt/uboot-ls-32b.git -PKG_SOURCE_VERSION:=719f8b606334bc73367f78c204dce69786963b65 +PKG_SOURCE_VERSION:=763de09cc7265e3147e2df2e15f91c73231907f4 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) @@ -35,6 +35,11 @@ define uboot/ls1043ardb CONFIG=ls1043ardb-uboot.bin endef +define uboot/ls1046ardb + TITLE:=U-Boot binary $(PKG_NAME)-$(PKG_VERSION) for NXP ls1046ardb 32b Dev Board + CONFIG=ls1046ardb-uboot.bin +endef + define uboot/ls1012ardb TITLE:=U-Boot binary $(PKG_NAME)-$(PKG_VERSION) for NXP ls1012ardb 32b Dev Board CONFIG=ls1012ardb-uboot.bin.swap @@ -42,6 +47,7 @@ endef UBOOTS := \ ls1043ardb \ + ls1046ardb \ ls1012ardb define Package/uboot/template diff --git a/package/boot/uboot-layerscape/Makefile b/package/boot/uboot-layerscape/Makefile index 17fd7f97b0..74c3db83ff 100644 --- a/package/boot/uboot-layerscape/Makefile +++ b/package/boot/uboot-layerscape/Makefile @@ -36,6 +36,11 @@ define uboot/ls1043ardb CONFIG=ls1043ardb endef +define uboot/ls1046ardb + TITLE:=U-Boot $(PKG_NAME)-$(PKG_VERSION) for NXP ls1046ardb 64b Dev Board + CONFIG=ls1046ardb_qspi +endef + define uboot/ls1012ardb TITLE:=U-Boot $(PKG_NAME)-$(PKG_VERSION) for NXP ls1012ardb 64b Dev Board CONFIG=ls1012ardb_qspi @@ -44,6 +49,7 @@ endef UBOOTS := \ ls1043ardb \ + ls1046ardb \ ls1012ardb define Package/uboot/template diff --git a/package/firmware/fman-ucode/Makefile b/package/firmware/fman-ucode/Makefile index 216882f664..b0b29ed9cf 100644 --- a/package/firmware/fman-ucode/Makefile +++ b/package/firmware/fman-ucode/Makefile @@ -35,8 +35,14 @@ define fman/ls1043ardb CONFIG=fsl_fman_ucode_ls1043_r1.0_108_4_5.bin endef +define fman/ls1046ardb + TITLE=FMAN UCODE $(PKG_NAME)-$(PKG_VERSION) for NXP ls1046ardb 64b/32b Dev Board + CONFIG=fsl_fman_ucode_t2080_r1.1_106_4_18.bin +endef + FMANS := \ - ls1043ardb + ls1043ardb \ + ls1046ardb define Package/fman/template define Package/fman-layerscape-$(1) diff --git a/package/firmware/rcw/Makefile b/package/firmware/rcw/Makefile index a412fd9f74..8dfbfe9546 100644 --- a/package/firmware/rcw/Makefile +++ b/package/firmware/rcw/Makefile @@ -16,7 +16,7 @@ PKG_SOURCE_PROTO:=git PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION) PKG_SOURCE_URL:=https://github.com/fsl-jyt/rcw.git -PKG_SOURCE_VERSION:=e101d1207f402c7b761990a3e6681fdae8f253e3 +PKG_SOURCE_VERSION:=17e09e19bd5cf94e5ebc84916b4607743c29723e PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) @@ -35,6 +35,11 @@ define rcw/ls1043ardb CONFIG=ls1043ardb-rcw.bin endef +define rcw/ls1046ardb + TITLE=RCW binary $(PKG_NAME)-$(PKG_VERSION) for NXP ls1046ardb 64b/32b Dev Board + CONFIG=ls1046ardb-rcw.bin +endef + define rcw/ls1012ardb TITLE=RCW binary $(PKG_NAME)-$(PKG_VERSION) for NXP ls1012ardb 64b/32b Dev Board CONFIG=ls1012ardb-rcw.bin @@ -42,6 +47,7 @@ endef RCWS := \ ls1043ardb \ + ls1046ardb \ ls1012ardb define Package/rcw/template diff --git a/target/linux/layerscape/64b/profiles/00-default.mk b/target/linux/layerscape/64b/profiles/00-default.mk index 68b18bac95..fc1231dc7a 100644 --- a/target/linux/layerscape/64b/profiles/00-default.mk +++ b/target/linux/layerscape/64b/profiles/00-default.mk @@ -10,6 +10,8 @@ endef DEFAULT_PACKAGES+= \ rcw-layerscape-ls1043ardb uboot-layerscape-$(SUBTARGET)-ls1043ardb \ fman-layerscape-ls1043ardb \ + rcw-layerscape-ls1046ardb uboot-layerscape-$(SUBTARGET)-ls1046ardb \ + fman-layerscape-ls1046ardb \ rcw-layerscape-ls1012ardb uboot-layerscape-$(SUBTARGET)-ls1012ardb \ kmod-ppfe ppfe-ls1012ardb diff --git a/target/linux/layerscape/image/Makefile b/target/linux/layerscape/image/Makefile index bb94ff863f..a06ae9e658 100644 --- a/target/linux/layerscape/image/Makefile +++ b/target/linux/layerscape/image/Makefile @@ -62,6 +62,21 @@ endif endef TARGET_DEVICES += ls1043ardb +define Device/ls1046ardb + DEVICE_TITLE := ls1046ardb-$(SUBTARGET) + DEVICE_PACKAGES += rcw-layerscape-ls1046ardb uboot-layerscape-$(SUBTARGET)-ls1046ardb fman-layerscape-ls1046ardb +ifeq ($(SUBTARGET),64b) + DEVICE_DTS = freescale/fsl-ls1046a-rdb +endif +ifeq ($(SUBTARGET),32b) + DEVICE_DTS = ../../../arm64/boot/dts/freescale/fsl-ls1046a-rdb +endif + IMAGE/firmware.bin = append-ls-rcw $(1) | pad-to 1M | append-ls-uboot $(1) | pad-to 3M | \ + append-ls-fman $(1) | pad-to 4M | append-ls-dtb $$(DEVICE_DTS) | pad-to 5M | \ + append-kernel | pad-to 10M | append-ls-rootfs-ext4 $(1) 22M | check-size 33554433 +endef +TARGET_DEVICES += ls1046ardb + define Device/ls1012ardb DEVICE_TITLE := ls1012ardb-$(SUBTARGET) DEVICE_PACKAGES += rcw-layerscape-ls1012ardb uboot-layerscape-$(SUBTARGET)-ls1012ardb kmod-ppfe ppfe-ls1012ardb diff --git a/target/linux/layerscape/patches-4.4/0140-config-add-freescale-config-for-amr64.patch b/target/linux/layerscape/patches-4.4/0140-config-add-freescale-config-for-amr64.patch new file mode 100644 index 0000000000..74ff44bdab --- /dev/null +++ b/target/linux/layerscape/patches-4.4/0140-config-add-freescale-config-for-amr64.patch @@ -0,0 +1,148 @@ +From 880b7aa2e2c62e54245fb77d92db502175232d86 Mon Sep 17 00:00:00 2001 +From: Zhao Qiang +Date: Wed, 12 Oct 2016 11:01:17 +0800 +Subject: [PATCH 140/141] config: add freescale config for amr64 + +Signed-off-by: Zhao Qiang +--- + arch/arm64/configs/freescale.config | 134 +++++++++++++++++++++++++++++++++++ + 1 file changed, 134 insertions(+) + create mode 100644 arch/arm64/configs/freescale.config + +--- /dev/null ++++ b/arch/arm64/configs/freescale.config +@@ -0,0 +1,134 @@ ++# general options ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SLAB=y ++CONFIG_MODULE_FORCE_LOAD=y ++CONFIG_MODVERSIONS=y ++CONFIG_ARM64_VA_BITS_48=y ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_SIZE=262144 ++CONFIG_PRINTK_TIME=y ++CONFIG_PID_IN_CONTEXTIDR=y ++CONFIG_IPV6=y ++# iommu ++CONFIG_IOMMU_SUPPORT=y ++CONFIG_ARM_SMMU=y ++# dpaa2 ++CONFIG_STAGING=y ++CONFIG_FSL_MC_BUS=y ++CONFIG_FSL_MC_RESTOOL=y ++CONFIG_FSL_MC_DPIO=y ++CONFIG_FSL_DPAA2=y ++CONFIG_NET_NS=y ++CONFIG_FSL_DPAA2_DCE=y ++CONFIG_FSL_DCE_FLOW_LIMIT=65536 ++CONFIG_FSL_DCE_API_TIME_TRIAL=m ++CONFIG_LS_SOC_DRIVERS=y ++# mdio ++CONFIG_FSL_XGMAC_MDIO=y ++CONFIG_MDIO_BUS_MUX_MMIOREG=y ++# phy ++CONFIG_AQUANTIA_PHY=y ++CONFIG_VITESSE_PHY=y ++CONFIG_REALTEK_PHY=y ++CONFIG_FIXED_PHY=y ++# reset support ++CONFIG_POWER_RESET_LAYERSCAPE=y ++# pci ++CONFIG_PCI_LAYERSCAPE=y ++CONFIG_PCI_HOST_GENERIC=y ++CONFIG_E1000=y ++CONFIG_E1000E=y ++# clock driver ++CONFIG_CLK_QORIQ=y ++# usb ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_DWC3=y ++CONFIG_DMADEVICES=y ++# ahci/sata ++CONFIG_AHCI_QORIQ=y ++# esdhc ++CONFIG_MMC_SDHCI_OF_ESDHC=y ++# virtualization ++CONFIG_VHOST_NET=y ++CONFIG_KVM_ARM_MAX_VCPUS=8 ++# I2C ++CONFIG_I2C=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_MUX=y ++CONFIG_I2C_MUX_PCA954x=y ++CONFIG_I2C_IMX=y ++# hardware monitor ++CONFIG_SENSORS_LM90=y ++CONFIG_SENSORS_INA2XX=y ++# DPAA 1 ++CONFIG_HAS_FSL_QBMAN=y ++CONFIG_CRYPTO_DEV_FSL_CAAM=y ++# network ++CONFIG_BRIDGE=m ++CONFIG_MACVLAN=y ++CONFIG_FSL_SDK_FMAN=y ++CONFIG_FMAN_ARM=y ++CONFIG_FSL_SDK_DPAA_ETH=y ++CONFIG_INET_ESP=y ++CONFIG_XFRM_USER=y ++CONFIG_NET_KEY=y ++# vfio ++CONFIG_VFIO=y ++CONFIG_VFIO_PCI=y ++CONFIG_VFIO_FSL_MC=y ++# CPU Frequency scaling ++CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_GOV_COMMON=y ++CONFIG_CPU_FREQ_STAT=y ++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y ++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y ++CONFIG_CPU_FREQ_GOV_POWERSAVE=y ++CONFIG_CPU_FREQ_GOV_USERSPACE=y ++CONFIG_CPU_FREQ_GOV_ONDEMAND=y ++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y ++CONFIG_QORIQ_CPUFREQ=y ++#ifc ++CONFIG_MTD_OF_PARTS=y ++CONFIG_MTD_GEN_PROBE=y ++CONFIG_MTD=y ++CONFIG_MTD_CMDLINE_PARTS=y ++CONFIG_MTD_BLOCK=y ++CONFIG_MTD_CFI=y ++CONFIG_MTD_CFI_ADV_OPTIONS=y ++CONFIG_MTD_CFI_INTELEXT=y ++CONFIG_MTD_CFI_AMDSTD=y ++CONFIG_MTD_CFI_STAA=y ++CONFIG_MTD_PHYSMAP_OF=y ++CONFIG_MTD_NAND=y ++CONFIG_MTD_NAND_FSL_IFC=y ++#spi ++CONFIG_SPI_FSL_DSPI=y ++CONFIG_MTD_SPI_NOR=y ++CONFIG_MTD_DATAFLASH=y ++CONFIG_MTD_M25P80=y ++CONFIG_MTD_SST25L=y ++#RTC ++CONFIG_RTC_DRV_DS3232=y ++#CryptoAPI ++CONFIG_CRYPTO_SHA256=y ++CONFIG_CRYPTO_SHA512=y ++# ls1046a ++CONFIG_MTD_CFI_BE_BYTE_SWAP=y ++CONFIG_SPI_FSL_QUADSPI=y ++CONFIG_RTC_DRV_PCF2127=y ++CONFIG_WATCHDOG=y ++CONFIG_IMX2_WDT=y ++CONFIG_HWMON=y ++CONFIG_SENSORS_LM90=y ++CONFIG_SENSORS_INA2XX=y ++CONFIG_EEPROM_AT24=y ++# lpuart ++CONFIG_SERIAL_FSL_LPUART=y ++CONFIG_SERIAL_FSL_LPUART_CONSOLE=y ++# ftm ++CONFIG_FTM_ALARM=y ++# qDMA ++CONFIG_FSL_QDMA=y ++CONFIG_DMATEST=y ++#NVMe ++CONFIG_BLK_DEV_NVME=y diff --git a/target/linux/layerscape/patches-4.4/3131-arm64-ls1046a-add-DTS-for-Freescale-LS1046A-SoC.patch b/target/linux/layerscape/patches-4.4/3131-arm64-ls1046a-add-DTS-for-Freescale-LS1046A-SoC.patch new file mode 100644 index 0000000000..ca11f9fb8b --- /dev/null +++ b/target/linux/layerscape/patches-4.4/3131-arm64-ls1046a-add-DTS-for-Freescale-LS1046A-SoC.patch @@ -0,0 +1,1056 @@ +From 80ca93f1a5590529e39560099a71edb03897050e Mon Sep 17 00:00:00 2001 +From: Mingkai Hu +Date: Wed, 11 May 2016 11:29:51 +0800 +Subject: [PATCH 131/141] arm64/ls1046a: add DTS for Freescale LS1046A SoC + +LS1046a is an SoC with 4 ARMv8 A72 cores and most other IP blocks +similar to LS1043a which complies to Chassis 2.1 spec. + +Following levels of DTSI/DTS files have been created for the +LS1046A SoC family: + +- fsl-ls1046a.dtsi: + DTS-Include file for FSL LS1046A SoC. + +Signed-off-by: Gong Qianyu +Signed-off-by: Minghuan Lian +Signed-off-by: Hou Zhiqiang +Signed-off-by: Mihai Bantea +Signed-off-by: Mingkai Hu +--- + arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1029 ++++++++++++++++++++++++ + 1 file changed, 1029 insertions(+) + create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi + +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +@@ -0,0 +1,1029 @@ ++/* ++ * Device Tree Include file for Freescale Layerscape-1046A family SoC. ++ * ++ * Copyright 2016, Freescale Semiconductor ++ * ++ * Mingkai Hu ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPLv2 or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/ { ++ compatible = "fsl,ls1046a"; ++ interrupt-parent = <&gic>; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ aliases { ++ ethernet0 = &fm1mac1; ++ ethernet1 = &fm1mac2; ++ ethernet2 = &fm1mac3; ++ ethernet3 = &fm1mac4; ++ ethernet4 = &fm1mac5; ++ ethernet5 = &fm1mac6; ++ ethernet6 = &fm1mac9; ++ }; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ reg = <0x0>; ++ clocks = <&clockgen 1 0>; ++ next-level-cache = <&l2>; ++ }; ++ ++ cpu1: cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ reg = <0x1>; ++ clocks = <&clockgen 1 0>; ++ next-level-cache = <&l2>; ++ }; ++ ++ cpu2: cpu@2 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ reg = <0x2>; ++ clocks = <&clockgen 1 0>; ++ next-level-cache = <&l2>; ++ }; ++ ++ cpu3: cpu@3 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a72"; ++ reg = <0x3>; ++ clocks = <&clockgen 1 0>; ++ next-level-cache = <&l2>; ++ }; ++ ++ l2: l2-cache { ++ compatible = "cache"; ++ }; ++ }; ++ ++ memory@80000000 { ++ device_type = "memory"; ++ reg = <0x0 0x80000000 0 0x80000000>; ++ /* DRAM space 1, size: 2GiB DRAM */ ++ }; ++ ++ sysclk: sysclk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <100000000>; ++ clock-output-names = "sysclk"; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = <1 13 0x1>, /* Physical Secure PPI */ ++ <1 14 0x1>, /* Physical Non-Secure PPI */ ++ <1 11 0x1>, /* Virtual PPI */ ++ <1 10 0x1>; /* Hypervisor PPI */ ++ arm,reread-timer; ++ }; ++ ++ pmu { ++ compatible = "arm,armv8-pmuv3"; ++ interrupts = <0 106 0x4>, ++ <0 107 0x4>, ++ <0 95 0x4>, ++ <0 97 0x4>; ++ interrupt-affinity = <&cpu0>, ++ <&cpu1>, ++ <&cpu2>, ++ <&cpu3>; ++ }; ++ ++ gic: interrupt-controller@1400000 { ++ compatible = "arm,gic-400"; ++ #interrupt-cells = <3>; ++ interrupt-controller; ++ reg = <0x0 0x1410000 0 0x10000>, /* GICD */ ++ <0x0 0x1420000 0 0x20000>, /* GICC */ ++ <0x0 0x1440000 0 0x20000>, /* GICH */ ++ <0x0 0x1460000 0 0x20000>; /* GICV */ ++ interrupts = <1 9 0xf08>; ++ }; ++ ++ soc { ++ compatible = "simple-bus"; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ranges; ++ ++ clockgen: clocking@1ee1000 { ++ compatible = "fsl,ls1046a-clockgen"; ++ reg = <0x0 0x1ee1000 0x0 0x1000>; ++ #clock-cells = <2>; ++ clocks = <&sysclk>; ++ }; ++ ++ scfg: scfg@1570000 { ++ compatible = "fsl,ls1046a-scfg", "syscon"; ++ reg = <0x0 0x1570000 0x0 0x10000>; ++ big-endian; ++ }; ++ ++ reset: reset@1ee00b0 { ++ compatible = "fsl,ls-reset"; ++ reg = <0x0 0x1ee00b0 0x0 0x4>; ++ big-endian; ++ }; ++ ++ rcpm: rcpm@1ee2000 { ++ compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1"; ++ reg = <0x0 0x1ee2000 0x0 0x10000>; ++ }; ++ ++ ifc: ifc@1530000 { ++ compatible = "fsl,ifc", "simple-bus"; ++ reg = <0x0 0x1530000 0x0 0x10000>; ++ interrupts = <0 43 0x4>; ++ }; ++ ++ esdhc: esdhc@1560000 { ++ compatible = "fsl,ls1046a-esdhc", "fsl,esdhc"; ++ reg = <0x0 0x1560000 0x0 0x10000>; ++ interrupts = <0 62 0x4>; ++ clock-frequency = <0>; ++ voltage-ranges = <1800 1800 3300 3300>; ++ sdhci,auto-cmd12; ++ big-endian; ++ bus-width = <4>; ++ }; ++ ++ qman: qman@1880000 { ++ compatible = "fsl,qman"; ++ reg = <0x00 0x1880000 0x0 0x10000>; ++ interrupts = <0 45 0x4>; ++ }; ++ ++ bman: bman@1890000 { ++ compatible = "fsl,bman"; ++ reg = <0x00 0x1890000 0x0 0x10000>; ++ interrupts = <0 45 0x4>; ++ }; ++ ++ fman0: fman@1a00000 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ cell-index = <0>; ++ compatible = "fsl,fman", "simple-bus"; ++ ranges = <0x0 0x00 0x1a00000 0x100000>; ++ reg = <0x00 0x1a00000 0x0 0x100000>; ++ interrupts = <0 44 0x4>, <0 45 0x4>; ++ clocks = <&clockgen 3 0>; ++ clock-names = "fmanclk"; ++ ++ cc { ++ compatible = "fsl,fman-cc"; ++ }; ++ ++ muram@0 { ++ compatible = "fsl,fman-muram"; ++ reg = <0x0 0x60000>; ++ }; ++ ++ bmi@80000 { ++ compatible = "fsl,fman-bmi"; ++ reg = <0x80000 0x400>; ++ }; ++ ++ qmi@80400 { ++ compatible = "fsl,fman-qmi"; ++ reg = <0x80400 0x400>; ++ }; ++ ++ fman0_oh1: port@82000 { ++ cell-index = <0>; ++ compatible = "fsl,fman-port-oh"; ++ reg = <0x82000 0x1000>; ++ }; ++ ++ fman0_oh2: port@83000 { ++ cell-index = <1>; ++ compatible = "fsl,fman-port-oh"; ++ reg = <0x83000 0x1000>; ++ }; ++ ++ fman0_oh3: port@84000 { ++ cell-index = <2>; ++ compatible = "fsl,fman-port-oh"; ++ reg = <0x84000 0x1000>; ++ }; ++ ++ fman0_oh4: port@85000 { ++ cell-index = <3>; ++ compatible = "fsl,fman-port-oh"; ++ reg = <0x85000 0x1000>; ++ }; ++ ++ fman0_oh5: port@86000 { ++ cell-index = <4>; ++ compatible = "fsl,fman-port-oh"; ++ reg = <0x86000 0x1000>; ++ }; ++ ++ fman0_oh6: port@87000 { ++ cell-index = <5>; ++ compatible = "fsl,fman-port-oh"; ++ reg = <0x87000 0x1000>; ++ }; ++ ++ policer@c0000 { ++ compatible = "fsl,fman-policer"; ++ reg = <0xc0000 0x1000>; ++ }; ++ ++ keygen@c1000 { ++ compatible = "fsl,fman-keygen"; ++ reg = <0xc1000 0x1000>; ++ }; ++ ++ dma@c2000 { ++ compatible = "fsl,fman-dma"; ++ reg = <0xc2000 0x1000>; ++ }; ++ ++ fpm@c3000 { ++ compatible = "fsl,fman-fpm"; ++ reg = <0xc3000 0x1000>; ++ }; ++ ++ parser@c7000 { ++ compatible = "fsl,fman-parser"; ++ reg = <0xc7000 0x1000>; ++ }; ++ ++ vsps@dc000 { ++ compatible = "fsl,fman-vsps"; ++ reg = <0xdc000 0x1000>; ++ }; ++ ++ mdio0: mdio@fc000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0xfc000 0x1000>; ++ }; ++ ++ xmdio0: mdio@fd000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0xfd000 0x1000>; ++ }; ++ ++ fman0_rx0: port@88000 { ++ cell-index = <0>; ++ compatible = "fsl,fman-port-1g-rx"; ++ reg = <0x88000 0x1000>; ++ }; ++ ++ fman0_tx0: port@a8000 { ++ cell-index = <0>; ++ compatible = "fsl,fman-port-1g-tx"; ++ reg = <0xa8000 0x1000>; ++ }; ++ ++ fm1mac1: ethernet@e0000 { ++ cell-index = <0>; ++ compatible = "fsl,fman-memac"; ++ reg = <0xe0000 0x1000>; ++ fsl,port-handles = <&fman0_rx0 &fman0_tx0>; ++ ptimer-handle = <&ptp_timer0>; ++ }; ++ ++ mdio@e1000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0xe1000 0x1000>; ++ }; ++ ++ fman0_rx1: port@89000 { ++ cell-index = <1>; ++ compatible = "fsl,fman-port-1g-rx"; ++ reg = <0x89000 0x1000>; ++ }; ++ ++ fman0_tx1: port@a9000 { ++ cell-index = <1>; ++ compatible = "fsl,fman-port-1g-tx"; ++ reg = <0xa9000 0x1000>; ++ }; ++ ++ fm1mac2: ethernet@e2000 { ++ cell-index = <1>; ++ compatible = "fsl,fman-memac"; ++ reg = <0xe2000 0x1000>; ++ fsl,port-handles = <&fman0_rx1 &fman0_tx1>; ++ ptimer-handle = <&ptp_timer0>; ++ }; ++ ++ mdio@e3000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0xe3000 0x1000>; ++ }; ++ ++ fman0_rx2: port@8a000 { ++ cell-index = <2>; ++ compatible = "fsl,fman-port-1g-rx"; ++ reg = <0x8a000 0x1000>; ++ }; ++ ++ fman0_tx2: port@aa000 { ++ cell-index = <2>; ++ compatible = "fsl,fman-port-1g-tx"; ++ reg = <0xaa000 0x1000>; ++ }; ++ ++ fm1mac3: ethernet@e4000 { ++ cell-index = <2>; ++ compatible = "fsl,fman-memac"; ++ reg = <0xe4000 0x1000>; ++ fsl,port-handles = <&fman0_rx2 &fman0_tx2>; ++ ptimer-handle = <&ptp_timer0>; ++ }; ++ ++ mdio@e5000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0xe5000 0x1000>; ++ }; ++ ++ fman0_rx3: port@8b000 { ++ cell-index = <3>; ++ compatible = "fsl,fman-port-1g-rx"; ++ reg = <0x8b000 0x1000>; ++ }; ++ ++ fman0_tx3: port@ab000 { ++ cell-index = <3>; ++ compatible = "fsl,fman-port-1g-tx"; ++ reg = <0xab000 0x1000>; ++ }; ++ ++ fm1mac4: ethernet@e6000 { ++ cell-index = <3>; ++ compatible = "fsl,fman-memac"; ++ reg = <0xe6000 0x1000>; ++ fsl,port-handles = <&fman0_rx3 &fman0_tx3>; ++ ptimer-handle = <&ptp_timer0>; ++ }; ++ ++ mdio@e7000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0xe7000 0x1000>; ++ }; ++ ++ fman0_rx4: port@8c000 { ++ cell-index = <4>; ++ compatible = "fsl,fman-port-1g-rx"; ++ reg = <0x8c000 0x1000>; ++ }; ++ ++ fman0_tx4: port@ac000 { ++ cell-index = <4>; ++ compatible = "fsl,fman-port-1g-tx"; ++ reg = <0xac000 0x1000>; ++ }; ++ ++ fm1mac5: ethernet@e8000 { ++ cell-index = <4>; ++ compatible = "fsl,fman-memac"; ++ reg = <0xe8000 0x1000>; ++ fsl,port-handles = <&fman0_rx4 &fman0_tx4>; ++ ptimer-handle = <&ptp_timer0>; ++ }; ++ ++ mdio@e9000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0xe9000 0x1000>; ++ }; ++ ++ fman0_rx5: port@8d000 { ++ cell-index = <5>; ++ compatible = "fsl,fman-port-1g-rx"; ++ reg = <0x8d000 0x1000>; ++ }; ++ ++ fman0_tx5: port@ad000 { ++ cell-index = <5>; ++ compatible = "fsl,fman-port-1g-tx"; ++ reg = <0xad000 0x1000>; ++ }; ++ ++ fm1mac6: ethernet@ea000 { ++ cell-index = <5>; ++ compatible = "fsl,fman-memac"; ++ reg = <0xea000 0x1000>; ++ fsl,port-handles = <&fman0_rx5 &fman0_tx5>; ++ ptimer-handle = <&ptp_timer0>; ++ }; ++ ++ mdio@eb000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0xeb000 0x1000>; ++ }; ++ ++ fman0_10g_rx0: port@90000 { ++ cell-index = <0>; ++ compatible = "fsl,fman-port-10g-rx"; ++ reg = <0x90000 0x1000>; ++ }; ++ ++ fman0_10g_tx0: port@b0000 { ++ cell-index = <0>; ++ compatible = "fsl,fman-port-10g-tx"; ++ reg = <0xb0000 0x1000>; ++ fsl,qman-channel-id = <0x800>; ++ }; ++ ++ fm1mac9: ethernet@f0000 { ++ cell-index = <0>; ++ compatible = "fsl,fman-memac"; ++ reg = <0xf0000 0x1000>; ++ fsl,port-handles = <&fman0_10g_rx0 &fman0_10g_tx0>; ++ }; ++ ++ mdio@f1000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0xf1000 0x1000>; ++ }; ++ ++ ptp_timer0: rtc@fe000 { ++ compatible = "fsl,fman-rtc"; ++ reg = <0xfe000 0x1000>; ++ }; ++ }; ++ ++ dspi: dspi@2100000 { ++ compatible = "fsl,ls1046a-dspi", "fsl,ls1021a-v1.0-dspi"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2100000 0x0 0x10000>; ++ interrupts = <0 64 0x4>; ++ clock-names = "dspi"; ++ clocks = <&clockgen 4 1>; ++ spi-num-chipselects = <5>; ++ big-endian; ++ status = "disabled"; ++ }; ++ ++ qspi: quadspi@1550000 { ++ compatible = "fsl,ls1046a-qspi", "fsl,ls1021a-qspi"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x1550000 0x0 0x10000>, ++ <0x0 0x40000000 0x0 0x10000000>; ++ reg-names = "QuadSPI", "QuadSPI-memory"; ++ interrupts = <0 99 0x4>; ++ clock-names = "qspi_en", "qspi"; ++ clocks = <&clockgen 4 1>, <&clockgen 4 1>; ++ big-endian; ++ fsl,qspi-has-second-chip; ++ status = "disabled"; ++ }; ++ ++ i2c0: i2c@2180000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2180000 0x0 0x10000>; ++ interrupts = <0 56 0x4>; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 1>; ++ dmas = <&edma0 1 39>, ++ <&edma0 1 38>; ++ dma-names = "tx", "rx"; ++ status = "disabled"; ++ }; ++ ++ i2c1: i2c@2190000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2190000 0x0 0x10000>; ++ interrupts = <0 57 0x4>; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 1>; ++ status = "disabled"; ++ }; ++ ++ i2c2: i2c@21a0000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x21a0000 0x0 0x10000>; ++ interrupts = <0 58 0x4>; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 1>; ++ status = "disabled"; ++ }; ++ ++ i2c3: i2c@21b0000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x21b0000 0x0 0x10000>; ++ interrupts = <0 59 0x4>; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 1>; ++ status = "disabled"; ++ }; ++ ++ duart0: serial@21c0500 { ++ compatible = "fsl,ns16550", "ns16550a"; ++ reg = <0x00 0x21c0500 0x0 0x100>; ++ interrupts = <0 54 0x4>; ++ clocks = <&clockgen 4 1>; ++ }; ++ ++ duart1: serial@21c0600 { ++ compatible = "fsl,ns16550", "ns16550a"; ++ reg = <0x00 0x21c0600 0x0 0x100>; ++ interrupts = <0 54 0x4>; ++ clocks = <&clockgen 4 1>; ++ }; ++ ++ duart2: serial@21d0500 { ++ compatible = "fsl,ns16550", "ns16550a"; ++ reg = <0x0 0x21d0500 0x0 0x100>; ++ interrupts = <0 55 0x4>; ++ clocks = <&clockgen 4 1>; ++ }; ++ ++ duart3: serial@21d0600 { ++ compatible = "fsl,ns16550", "ns16550a"; ++ reg = <0x0 0x21d0600 0x0 0x100>; ++ interrupts = <0 55 0x4>; ++ clocks = <&clockgen 4 1>; ++ }; ++ ++ gpio0: gpio@2300000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2300000 0x0 0x10000>; ++ interrupts = <0 66 0x4>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ gpio1: gpio@2310000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2310000 0x0 0x10000>; ++ interrupts = <0 67 0x4>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ gpio2: gpio@2320000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2320000 0x0 0x10000>; ++ interrupts = <0 68 0x4>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ gpio3: gpio@2330000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2330000 0x0 0x10000>; ++ interrupts = <0 134 0x4>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ lpuart0: serial@2950000 { ++ compatible = "fsl,ls1021a-lpuart"; ++ reg = <0x0 0x2950000 0x0 0x1000>; ++ interrupts = <0 48 0x4>; ++ clocks = <&clockgen 0 0>; ++ clock-names = "ipg"; ++ status = "disabled"; ++ }; ++ ++ lpuart1: serial@2960000 { ++ compatible = "fsl,ls1021a-lpuart"; ++ reg = <0x0 0x2960000 0x0 0x1000>; ++ interrupts = <0 49 0x4>; ++ clocks = <&clockgen 4 1>; ++ clock-names = "ipg"; ++ status = "disabled"; ++ }; ++ ++ lpuart2: serial@2970000 { ++ compatible = "fsl,ls1021a-lpuart"; ++ reg = <0x0 0x2970000 0x0 0x1000>; ++ interrupts = <0 50 0x4>; ++ clocks = <&clockgen 4 1>; ++ clock-names = "ipg"; ++ status = "disabled"; ++ }; ++ ++ lpuart3: serial@2980000 { ++ compatible = "fsl,ls1021a-lpuart"; ++ reg = <0x0 0x2980000 0x0 0x1000>; ++ interrupts = <0 51 0x4>; ++ clocks = <&clockgen 4 1>; ++ clock-names = "ipg"; ++ status = "disabled"; ++ }; ++ ++ lpuart4: serial@2990000 { ++ compatible = "fsl,ls1021a-lpuart"; ++ reg = <0x0 0x2990000 0x0 0x1000>; ++ interrupts = <0 52 0x4>; ++ clocks = <&clockgen 4 1>; ++ clock-names = "ipg"; ++ status = "disabled"; ++ }; ++ ++ lpuart5: serial@29a0000 { ++ compatible = "fsl,ls1021a-lpuart"; ++ reg = <0x0 0x29a0000 0x0 0x1000>; ++ interrupts = <0 53 0x4>; ++ clocks = <&clockgen 4 1>; ++ clock-names = "ipg"; ++ status = "disabled"; ++ }; ++ ++ ftm0: ftm0@29d0000 { ++ compatible = "fsl,ftm-alarm"; ++ reg = <0x0 0x29d0000 0x0 0x10000>; ++ interrupts = <0 86 0x4>; ++ big-endian; ++ rcpm-wakeup = <&rcpm 0x0 0x20000000>; ++ status = "okay"; ++ }; ++ ++ wdog0: wdog@2ad0000 { ++ compatible = "fsl,ls1046a-wdt", "fsl,imx21-wdt"; ++ reg = <0x0 0x2ad0000 0x0 0x10000>; ++ interrupts = <0 83 0x4>; ++ clocks = <&clockgen 4 1>; ++ clock-names = "wdog"; ++ big-endian; ++ }; ++ ++ edma0: edma@2c00000 { ++ #dma-cells = <2>; ++ compatible = "fsl,vf610-edma"; ++ reg = <0x0 0x2c00000 0x0 0x10000>, ++ <0x0 0x2c10000 0x0 0x10000>, ++ <0x0 0x2c20000 0x0 0x10000>; ++ interrupts = <0 103 0x4>, ++ <0 103 0x4>; ++ interrupt-names = "edma-tx", "edma-err"; ++ dma-channels = <32>; ++ big-endian; ++ clock-names = "dmamux0", "dmamux1"; ++ clocks = <&clockgen 4 1>, ++ <&clockgen 4 1>; ++ }; ++ ++ usb0: usb3@2f00000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x2f00000 0x0 0x10000>; ++ interrupts = <0 60 0x4>; ++ dr_mode = "host"; ++ configure-gfladj; ++ snps,dis_rxdet_inp3_quirk; ++ }; ++ ++ usb1: usb3@3000000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x3000000 0x0 0x10000>; ++ interrupts = <0 61 0x4>; ++ dr_mode = "host"; ++ configure-gfladj; ++ snps,dis_rxdet_inp3_quirk; ++ }; ++ ++ usb2: usb3@3100000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x3100000 0x0 0x10000>; ++ interrupts = <0 63 0x4>; ++ dr_mode = "host"; ++ configure-gfladj; ++ snps,dis_rxdet_inp3_quirk; ++ }; ++ ++ sata: sata@3200000 { ++ compatible = "fsl,ls1046a-ahci"; ++ reg = <0x0 0x3200000 0x0 0x10000>; ++ interrupts = <0 69 0x4>; ++ clocks = <&clockgen 4 1>; ++ }; ++ ++ qdma: qdma@8380000 { ++ compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma"; ++ reg = <0x0 0x838f000 0x0 0x11000 /* Controller regs */ ++ 0x0 0x83a0000 0x0 0x40000>; /* Block regs */ ++ interrupts = <0 152 0x4>, ++ <0 39 0x4>; ++ interrupt-names = "qdma-error", "qdma-queue"; ++ channels = <8>; ++ queues = <2>; ++ status-sizes = <64>; ++ queue-sizes = <64 64>; ++ big-endian; ++ }; ++ ++ msi1: msi-controller@1580000 { ++ compatible = "fsl,1s1046a-msi"; ++ reg = <0x0 0x1580000 0x0 0x10000>; ++ msi-controller; ++ interrupts = <0 116 0x4>, ++ <0 111 0x4>, ++ <0 112 0x4>, ++ <0 113 0x4>; ++ }; ++ ++ msi2: msi-controller@1590000 { ++ compatible = "fsl,1s1046a-msi"; ++ reg = <0x0 0x1590000 0x0 0x10000>; ++ msi-controller; ++ interrupts = <0 126 0x4>, ++ <0 121 0x4>, ++ <0 122 0x4>, ++ <0 123 0x4>; ++ }; ++ ++ msi3: msi-controller@15a0000 { ++ compatible = "fsl,1s1046a-msi"; ++ reg = <0x0 0x15a0000 0x0 0x10000>; ++ msi-controller; ++ interrupts = <0 160 0x4>, ++ <0 155 0x4>, ++ <0 156 0x4>, ++ <0 157 0x4>; ++ }; ++ ++ pcie@3400000 { ++ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie"; ++ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ ++ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ ++ reg-names = "regs", "config"; ++ interrupts = <0 118 0x4>, /* controller interrupt */ ++ <0 117 0x4>; /* PME interrupt */ ++ interrupt-names = "intr", "pme"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ num-lanes = <4>; ++ bus-range = <0x0 0xff>; ++ ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ ++ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ ++ msi-parent = <&msi1>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0000 0 0 1 &gic 0 110 0x4>, ++ <0000 0 0 2 &gic 0 110 0x4>, ++ <0000 0 0 3 &gic 0 110 0x4>, ++ <0000 0 0 4 &gic 0 110 0x4>; ++ }; ++ ++ pcie@3500000 { ++ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie"; ++ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ ++ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ ++ reg-names = "regs", "config"; ++ interrupts = <0 128 0x4>, ++ <0 127 0x4>; ++ interrupt-names = "intr", "pme"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ num-lanes = <2>; ++ bus-range = <0x0 0xff>; ++ ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ ++ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ ++ msi-parent = <&msi2>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0000 0 0 1 &gic 0 120 0x4>, ++ <0000 0 0 2 &gic 0 120 0x4>, ++ <0000 0 0 3 &gic 0 120 0x4>, ++ <0000 0 0 4 &gic 0 120 0x4>; ++ }; ++ ++ pcie@3600000 { ++ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie"; ++ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ ++ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ ++ reg-names = "regs", "config"; ++ interrupts = <0 162 0x4>, ++ <0 161 0x4>; ++ interrupt-names = "intr", "pme"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ num-lanes = <2>; ++ bus-range = <0x0 0xff>; ++ ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ ++ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ ++ msi-parent = <&msi3>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0000 0 0 1 &gic 0 154 0x4>, ++ <0000 0 0 2 &gic 0 154 0x4>, ++ <0000 0 0 3 &gic 0 154 0x4>, ++ <0000 0 0 4 &gic 0 154 0x4>; ++ }; ++ }; ++ ++ fsl,dpaa { ++ compatible = "fsl,ls1046a-dpaa", "simple-bus", "fsl,dpaa"; ++ ethernet@0 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&fm1mac1>; ++ }; ++ ethernet@1 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&fm1mac2>; ++ }; ++ ethernet@2 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&fm1mac3>; ++ }; ++ ethernet@3 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&fm1mac4>; ++ }; ++ ethernet@4 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&fm1mac5>; ++ }; ++ ethernet@5 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&fm1mac6>; ++ }; ++ ethernet@8 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&fm1mac9>; ++ }; ++ }; ++ ++ qportals: qman-portals@500000000 { ++ ranges = <0x0 0x5 0x00000000 0x8000000>; ++ }; ++ bportals: bman-portals@508000000 { ++ ranges = <0x0 0x5 0x08000000 0x8000000>; ++ }; ++ reserved-memory { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ranges; ++ ++ bman_fbpr: bman-fbpr { ++ size = <0 0x1000000>; ++ alignment = <0 0x1000000>; ++ }; ++ qman_fqd: qman-fqd { ++ size = <0 0x800000>; ++ alignment = <0 0x800000>; ++ }; ++ qman_pfdr: qman-pfdr { ++ size = <0 0x2000000>; ++ alignment = <0 0x2000000>; ++ }; ++ }; ++}; ++ ++&fman0 { ++ /* offline - 1 */ ++ port@82000 { ++ fsl,qman-channel-id = <0x809>; ++ }; ++ ++ /* tx - 10g - 2 */ ++ port@a8000 { ++ fsl,qman-channel-id = <0x802>; ++ }; ++ /* tx - 10g - 3 */ ++ port@a9000 { ++ fsl,qman-channel-id = <0x803>; ++ }; ++ /* tx - 1g - 2 */ ++ port@aa000 { ++ fsl,qman-channel-id = <0x804>; ++ }; ++ /* tx - 1g - 3 */ ++ port@ab000 { ++ fsl,qman-channel-id = <0x805>; ++ }; ++ /* tx - 1g - 4 */ ++ port@ac000 { ++ fsl,qman-channel-id = <0x806>; ++ }; ++ /* tx - 1g - 5 */ ++ port@ad000 { ++ fsl,qman-channel-id = <0x807>; ++ }; ++ /* tx - 10g - 0 */ ++ port@b0000 { ++ fsl,qman-channel-id = <0x800>; ++ }; ++ /* tx - 10g - 1 */ ++ port@b1000 { ++ fsl,qman-channel-id = <0x801>; ++ }; ++ /* offline - 2 */ ++ port@83000 { ++ fsl,qman-channel-id = <0x80a>; ++ }; ++ /* offline - 3 */ ++ port@84000 { ++ fsl,qman-channel-id = <0x80b>; ++ }; ++ /* offline - 4 */ ++ port@85000 { ++ fsl,qman-channel-id = <0x80c>; ++ }; ++ /* offline - 5 */ ++ port@86000 { ++ fsl,qman-channel-id = <0x80d>; ++ }; ++ /* offline - 6 */ ++ port@87000 { ++ fsl,qman-channel-id = <0x80e>; ++ }; ++}; ++ ++&bman_fbpr { ++ compatible = "fsl,bman-fbpr"; ++ alloc-ranges = <0 0 0x10000 0>; ++}; ++ ++&qman_fqd { ++ compatible = "fsl,qman-fqd"; ++ alloc-ranges = <0 0 0x10000 0>; ++}; ++ ++&qman_pfdr { ++ compatible = "fsl,qman-pfdr"; ++ alloc-ranges = <0 0 0x10000 0>; ++}; ++ ++/include/ "qoriq-qman1-portals.dtsi" ++/include/ "qoriq-bman1-portals.dtsi" diff --git a/target/linux/layerscape/patches-4.4/3132-dts-ls1046a-add-LS1046ARDB-board-support.patch b/target/linux/layerscape/patches-4.4/3132-dts-ls1046a-add-LS1046ARDB-board-support.patch new file mode 100644 index 0000000000..77b53d76b3 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/3132-dts-ls1046a-add-LS1046ARDB-board-support.patch @@ -0,0 +1,557 @@ +From feb12cb699adbac2d4619401c7ff4fcc2fc97b6c Mon Sep 17 00:00:00 2001 +From: Mingkai Hu +Date: Mon, 26 Sep 2016 12:33:42 +0800 +Subject: [PATCH 132/141] dts/ls1046a: add LS1046ARDB board support + +commit e95a28cfd9a392fe5dc189a9ae097bbaaccd1228 +[context adjustment] + +Signed-off-by: Mingkai Hu +Integrated-by: Zhao Qiang +--- + arch/arm64/boot/dts/freescale/Makefile | 1 + + arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 198 +++++++++++++++++++++ + arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 178 +++++++++++++----- + 3 files changed, 328 insertions(+), 49 deletions(-) + create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts + +--- a/arch/arm64/boot/dts/freescale/Makefile ++++ b/arch/arm64/boot/dts/freescale/Makefile +@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2 + dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb + dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb + dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb ++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb + + always := $(dtb-y) + subdir-y := $(dts-dirs) +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +@@ -0,0 +1,198 @@ ++/* ++ * Device Tree Include file for Freescale Layerscape-1046A family SoC. ++ * ++ * Copyright 2016, Freescale Semiconductor ++ * ++ * Mingkai Hu ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPLv2 or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++#include "fsl-ls1046a.dtsi" ++ ++/ { ++ model = "LS1046A RDB Board"; ++ compatible = "fsl,ls1046a-rdb", "fsl,ls1046a"; ++ ++ aliases { ++ ethernet0 = &fm1mac3; ++ ethernet1 = &fm1mac4; ++ ethernet2 = &fm1mac5; ++ ethernet3 = &fm1mac6; ++ ethernet4 = &fm1mac9; ++ ethernet5 = &fm1mac10; ++ }; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ ina220@40 { ++ compatible = "ti,ina220"; ++ reg = <0x40>; ++ shunt-resistor = <1000>; ++ }; ++ adt7461a@4c { ++ compatible = "adi,adt7461"; ++ reg = <0x4c>; ++ }; ++ eeprom@56 { ++ compatible = "at24,24c512"; ++ reg = <0x52>; ++ }; ++ eeprom@57 { ++ compatible = "at24,24c512"; ++ reg = <0x53>; ++ }; ++}; ++ ++&i2c3 { ++ status = "okay"; ++ rtc@51 { ++ compatible = "nxp,pcf2129"; ++ reg = <0x51>; ++ }; ++}; ++ ++&ifc { ++ status = "okay"; ++ #address-cells = <2>; ++ #size-cells = <1>; ++ /* NAND Flashe and CPLD on board */ ++ ranges = <0x0 0x0 0x0 0x7e800000 0x00010000 ++ 0x2 0x0 0x0 0x7fb00000 0x00000100>; ++ ++ nand@0,0 { ++ compatible = "fsl,ifc-nand"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ reg = <0x0 0x0 0x10000>; ++ }; ++ ++ cpld: board-control@2,0 { ++ compatible = "fsl,ls1046ardb-cpld"; ++ reg = <0x2 0x0 0x0000100>; ++ }; ++}; ++ ++&qspi { ++ num-cs = <2>; ++ bus-num = <0>; ++ status = "okay"; ++ ++ qflash0: s25fs128s@0 { ++ compatible = "spansion,m25p80"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ spi-max-frequency = <20000000>; ++ reg = <0>; ++ }; ++ ++ qflash1: s25fs128s@1 { ++ compatible = "spansion,m25p80"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ spi-max-frequency = <20000000>; ++ reg = <1>; ++ }; ++ ++}; ++ ++&duart0 { ++ status = "okay"; ++}; ++ ++&duart1 { ++ status = "okay"; ++}; ++ ++&fman0 { ++ ethernet@e4000 { ++ phy-handle = <&rgmii_phy1>; ++ phy-connection-type = "rgmii"; ++ }; ++ ++ ethernet@e6000 { ++ phy-handle = <&rgmii_phy2>; ++ phy-connection-type = "rgmii"; ++ }; ++ ++ ethernet@e8000 { ++ phy-handle = <&sgmii_phy1>; ++ phy-connection-type = "sgmii"; ++ }; ++ ++ ethernet@ea000 { ++ phy-handle = <&sgmii_phy2>; ++ phy-connection-type = "sgmii"; ++ }; ++ ++ ethernet@f0000 { /* 10GEC1 */ ++ phy-handle = <&aqr106_phy>; ++ phy-connection-type = "xgmii"; ++ }; ++ ++ ethernet@f2000 { /* 10GEC2 */ ++ fixed-link = <0 1 10000 0 0>; ++ phy-connection-type = "xgmii"; ++ }; ++ ++ mdio@fc000 { ++ rgmii_phy1: ethernet-phy@1 { ++ reg = <0x1>; ++ }; ++ rgmii_phy2: ethernet-phy@2 { ++ reg = <0x2>; ++ }; ++ sgmii_phy1: ethernet-phy@3 { ++ reg = <0x3>; ++ }; ++ sgmii_phy2: ethernet-phy@4 { ++ reg = <0x4>; ++ }; ++ }; ++ ++ mdio@fd000 { ++ aqr106_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c45"; ++ interrupts = <0 131 4>; ++ reg = <0x0>; ++ }; ++ }; ++}; +--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +@@ -51,13 +51,7 @@ + #size-cells = <2>; + + aliases { +- ethernet0 = &fm1mac1; +- ethernet1 = &fm1mac2; +- ethernet2 = &fm1mac3; +- ethernet3 = &fm1mac4; +- ethernet4 = &fm1mac5; +- ethernet5 = &fm1mac6; +- ethernet6 = &fm1mac9; ++ crypto = &crypto; + }; + + cpus { +@@ -70,6 +64,7 @@ + reg = <0x0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; ++ cpu-idle-states = <&CPU_PH20>; + }; + + cpu1: cpu@1 { +@@ -78,6 +73,7 @@ + reg = <0x1>; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; ++ cpu-idle-states = <&CPU_PH20>; + }; + + cpu2: cpu@2 { +@@ -86,6 +82,7 @@ + reg = <0x2>; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; ++ cpu-idle-states = <&CPU_PH20>; + }; + + cpu3: cpu@3 { +@@ -94,6 +91,7 @@ + reg = <0x3>; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; ++ cpu-idle-states = <&CPU_PH20>; + }; + + l2: l2-cache { +@@ -101,6 +99,19 @@ + }; + }; + ++ idle-states { ++ entry-method = "arm,psci"; ++ ++ CPU_PH20: cpu-ph20 { ++ compatible = "arm,idle-state"; ++ idle-state-name = "PH20"; ++ arm,psci-suspend-param = <0x00010000>; ++ entry-latency-us = <1000>; ++ exit-latency-us = <1000>; ++ min-residency-us = <3000>; ++ }; ++ }; ++ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0 0x80000000>; +@@ -193,6 +204,49 @@ + bus-width = <4>; + }; + ++ crypto: crypto@1700000 { ++ compatible = "fsl,sec-v5.4", "fsl,sec-v5.0", ++ "fsl,sec-v4.0"; ++ fsl,sec-era = <8>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x00 0x1700000 0x100000>; ++ reg = <0x00 0x1700000 0x0 0x100000>; ++ interrupts = <0 75 0x4>; ++ ++ sec_jr0: jr@10000 { ++ compatible = "fsl,sec-v5.4-job-ring", ++ "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x10000 0x10000>; ++ interrupts = <0 71 0x4>; ++ }; ++ ++ sec_jr1: jr@20000 { ++ compatible = "fsl,sec-v5.4-job-ring", ++ "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x20000 0x10000>; ++ interrupts = <0 72 0x4>; ++ }; ++ ++ sec_jr2: jr@30000 { ++ compatible = "fsl,sec-v5.4-job-ring", ++ "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x30000 0x10000>; ++ interrupts = <0 73 0x4>; ++ }; ++ ++ sec_jr3: jr@40000 { ++ compatible = "fsl,sec-v5.4-job-ring", ++ "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x40000 0x10000>; ++ interrupts = <0 74 0x4>; ++ }; ++ }; ++ + qman: qman@1880000 { + compatible = "fsl,qman"; + reg = <0x00 0x1880000 0x0 0x10000>; +@@ -490,6 +544,19 @@ + fsl,qman-channel-id = <0x800>; + }; + ++ fman0_10g_rx1: port@91000 { ++ cell-index = <1>; ++ compatible = "fsl,fman-port-10g-rx"; ++ reg = <0x91000 0x1000>; ++ }; ++ ++ fman0_10g_tx1: port@b1000 { ++ cell-index = <1>; ++ compatible = "fsl,fman-port-10g-tx"; ++ reg = <0xb1000 0x1000>; ++ fsl,qman-channel-id = <0x801>; ++ }; ++ + fm1mac9: ethernet@f0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; +@@ -497,6 +564,13 @@ + fsl,port-handles = <&fman0_10g_rx0 &fman0_10g_tx0>; + }; + ++ fm1mac10: ethernet@f2000 { ++ cell-index = <1>; ++ compatible = "fsl,fman-memac"; ++ reg = <0xf2000 0x1000>; ++ fsl,port-handles = <&fman0_10g_rx1 &fman0_10g_tx1>; ++ }; ++ + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; +@@ -504,6 +578,13 @@ + reg = <0xf1000 0x1000>; + }; + ++ mdio@f3000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0xf3000 0x1000>; ++ }; ++ + ptp_timer0: rtc@fe000 { + compatible = "fsl,fman-rtc"; + reg = <0xfe000 0x1000>; +@@ -657,7 +738,7 @@ + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2950000 0x0 0x1000>; + interrupts = <0 48 0x4>; +- clocks = <&clockgen 0 0>; ++ clocks = <&clockgen 4 0>; + clock-names = "ipg"; + status = "disabled"; + }; +@@ -712,7 +793,7 @@ + reg = <0x0 0x29d0000 0x0 0x10000>; + interrupts = <0 86 0x4>; + big-endian; +- rcpm-wakeup = <&rcpm 0x0 0x20000000>; ++ rcpm-wakeup = <&rcpm 0x00020000 0x0>; + status = "okay"; + }; + +@@ -789,34 +870,34 @@ + big-endian; + }; + +- msi1: msi-controller@1580000 { +- compatible = "fsl,1s1046a-msi"; +- reg = <0x0 0x1580000 0x0 0x10000>; ++ msi: msi-controller@1580000 { ++ compatible = "fsl,ls1046a-msi"; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ranges; + msi-controller; +- interrupts = <0 116 0x4>, +- <0 111 0x4>, +- <0 112 0x4>, +- <0 113 0x4>; +- }; + +- msi2: msi-controller@1590000 { +- compatible = "fsl,1s1046a-msi"; +- reg = <0x0 0x1590000 0x0 0x10000>; +- msi-controller; +- interrupts = <0 126 0x4>, +- <0 121 0x4>, +- <0 122 0x4>, +- <0 123 0x4>; +- }; +- +- msi3: msi-controller@15a0000 { +- compatible = "fsl,1s1046a-msi"; +- reg = <0x0 0x15a0000 0x0 0x10000>; +- msi-controller; +- interrupts = <0 160 0x4>, +- <0 155 0x4>, +- <0 156 0x4>, +- <0 157 0x4>; ++ msi-bank@1580000 { ++ reg = <0x0 0x1580000 0x0 0x10000>; ++ interrupts = <0 116 0x4>, ++ <0 111 0x4>, ++ <0 112 0x4>, ++ <0 113 0x4>; ++ }; ++ msi-bank@1590000 { ++ reg = <0x0 0x1590000 0x0 0x10000>; ++ interrupts = <0 126 0x4>, ++ <0 121 0x4>, ++ <0 122 0x4>, ++ <0 123 0x4>; ++ }; ++ msi-bank@15a0000 { ++ reg = <0x0 0x15a0000 0x0 0x10000>; ++ interrupts = <0 160 0x4>, ++ <0 155 0x4>, ++ <0 156 0x4>, ++ <0 157 0x4>; ++ }; + }; + + pcie@3400000 { +@@ -826,15 +907,16 @@ + reg-names = "regs", "config"; + interrupts = <0 118 0x4>, /* controller interrupt */ + <0 117 0x4>; /* PME interrupt */ +- interrupt-names = "intr", "pme"; ++ interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; ++ dma-coherent; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ +- msi-parent = <&msi1>; ++ msi-parent = <&msi>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 110 0x4>, +@@ -850,15 +932,16 @@ + reg-names = "regs", "config"; + interrupts = <0 128 0x4>, + <0 127 0x4>; +- interrupt-names = "intr", "pme"; ++ interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; ++ dma-coherent; + num-lanes = <2>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ +- msi-parent = <&msi2>; ++ msi-parent = <&msi>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 120 0x4>, +@@ -874,15 +957,16 @@ + reg-names = "regs", "config"; + interrupts = <0 162 0x4>, + <0 161 0x4>; +- interrupt-names = "intr", "pme"; ++ interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; ++ dma-coherent; + num-lanes = <2>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ +- msi-parent = <&msi3>; ++ msi-parent = <&msi>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 154 0x4>, +@@ -894,14 +978,6 @@ + + fsl,dpaa { + compatible = "fsl,ls1046a-dpaa", "simple-bus", "fsl,dpaa"; +- ethernet@0 { +- compatible = "fsl,dpa-ethernet"; +- fsl,fman-mac = <&fm1mac1>; +- }; +- ethernet@1 { +- compatible = "fsl,dpa-ethernet"; +- fsl,fman-mac = <&fm1mac2>; +- }; + ethernet@2 { + compatible = "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm1mac3>; +@@ -922,6 +998,10 @@ + compatible = "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm1mac9>; + }; ++ ethernet@9 { ++ compatible = "fsl,dpa-ethernet"; ++ fsl,fman-mac = <&fm1mac10>; ++ }; + }; + + qportals: qman-portals@500000000 { diff --git a/target/linux/layerscape/patches-4.4/3133-ls1046ardb-add-ITS-file.patch b/target/linux/layerscape/patches-4.4/3133-ls1046ardb-add-ITS-file.patch new file mode 100644 index 0000000000..7461b928d5 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/3133-ls1046ardb-add-ITS-file.patch @@ -0,0 +1,69 @@ +From 1a831d848c88f1bb9e599abc641a201be6b03ef7 Mon Sep 17 00:00:00 2001 +From: Mingkai Hu +Date: Mon, 18 Apr 2016 15:38:24 +0800 +Subject: [PATCH 133/141] ls1046ardb: add ITS file + +Signed-off-by: Mingkai Hu +--- + kernel-ls1046a-rdb.its | 55 ++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 55 insertions(+) + create mode 100644 kernel-ls1046a-rdb.its + +--- /dev/null ++++ b/kernel-ls1046a-rdb.its +@@ -0,0 +1,55 @@ ++/* ++ * Copyright (C) 2016, Freescale Semiconductor ++ * ++ * Mingkai Hu ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++/dts-v1/; ++ ++/ { ++ description = "Image file for the LS1046A Linux Kernel"; ++ #address-cells = <1>; ++ ++ images { ++ kernel@1 { ++ description = "ARM64 Linux kernel"; ++ data = /incbin/("./arch/arm64/boot/Image.gz"); ++ type = "kernel"; ++ arch = "arm64"; ++ os = "linux"; ++ compression = "gzip"; ++ load = <0x80080000>; ++ entry = <0x80080000>; ++ }; ++ fdt@1 { ++ description = "Flattened Device Tree blob"; ++ data = /incbin/("./arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb"); ++ type = "flat_dt"; ++ arch = "arm64"; ++ compression = "none"; ++ load = <0x90000000>; ++ }; ++ ramdisk@1 { ++ description = "LS1046 Ramdisk"; ++ data = /incbin/("./fsl-image-core-ls1046ardb-be.ext2.gz"); ++ type = "ramdisk"; ++ arch = "arm64"; ++ os = "linux"; ++ compression = "gzip"; ++ }; ++ }; ++ ++ configurations { ++ default = "config@1"; ++ config@1 { ++ description = "Boot Linux kernel"; ++ kernel = "kernel@1"; ++ fdt = "fdt@1"; ++ ramdisk = "ramdisk@1"; ++ }; ++ }; ++}; diff --git a/target/linux/layerscape/patches-4.4/3143-armv8-aarch32-Execute-32-bit-Linux-for-ls1046a.patch b/target/linux/layerscape/patches-4.4/3143-armv8-aarch32-Execute-32-bit-Linux-for-ls1046a.patch new file mode 100644 index 0000000000..fc50e986dc --- /dev/null +++ b/target/linux/layerscape/patches-4.4/3143-armv8-aarch32-Execute-32-bit-Linux-for-ls1046a.patch @@ -0,0 +1,32 @@ +From 887fd872791ce6e60045f4c6a97926365c6c817c Mon Sep 17 00:00:00 2001 +From: Yutang Jiang +Date: Wed, 7 Dec 2016 00:47:35 +0800 +Subject: [PATCH] armv8: aarch32: Execute 32-bit Linux for ls1046a + +Signed-off-by: Yutang Jiang +--- + arch/arm/mach-imx/mach-layerscape.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +diff --git a/arch/arm/mach-imx/mach-layerscape.c b/arch/arm/mach-imx/mach-layerscape.c +index b87a90a..cbc541e 100644 +--- a/arch/arm/mach-imx/mach-layerscape.c ++++ b/arch/arm/mach-imx/mach-layerscape.c +@@ -12,11 +12,13 @@ + #include "common.h" + + static const char * const layerscape_dt_compat[] __initconst = { +- "fsl,ls1043a", + "fsl,ls1012a", ++ "fsl,ls1043a", ++ "fsl,ls1046a", + NULL, + }; + + DT_MACHINE_START(LAYERSCAPE, "Freescale LAYERSCAPE") ++ .smp = smp_ops(layerscape_smp_ops), + .dt_compat = layerscape_dt_compat, + MACHINE_END +-- +1.7.9.5 + diff --git a/target/linux/layerscape/patches-4.4/7126-net-phy-add-driver-for-aquantia-AQR106-107-phy.patch b/target/linux/layerscape/patches-4.4/7126-net-phy-add-driver-for-aquantia-AQR106-107-phy.patch new file mode 100644 index 0000000000..474982c2cc --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7126-net-phy-add-driver-for-aquantia-AQR106-107-phy.patch @@ -0,0 +1,63 @@ +From 637a6e183edf302111b28461c0c98b9634b30437 Mon Sep 17 00:00:00 2001 +From: Mingkai Hu +Date: Fri, 1 Apr 2016 17:11:10 +0800 +Subject: [PATCH 126/141] net: phy: add driver for aquantia AQR106/107 phy + +Signed-off-by: Mingkai Hu +--- + drivers/net/phy/aquantia.c | 30 ++++++++++++++++++++++++++++++ + 1 file changed, 30 insertions(+) + +--- a/drivers/net/phy/aquantia.c ++++ b/drivers/net/phy/aquantia.c +@@ -21,6 +21,8 @@ + #define PHY_ID_AQ1202 0x03a1b445 + #define PHY_ID_AQ2104 0x03a1b460 + #define PHY_ID_AQR105 0x03a1b4a2 ++#define PHY_ID_AQR106 0x03a1b4d0 ++#define PHY_ID_AQR107 0x03a1b4e0 + #define PHY_ID_AQR405 0x03a1b4b0 + + #define PHY_AQUANTIA_FEATURES (SUPPORTED_10000baseT_Full | \ +@@ -157,6 +159,32 @@ static struct phy_driver aquantia_driver + .driver = { .owner = THIS_MODULE,}, + }, + { ++ .phy_id = PHY_ID_AQR106, ++ .phy_id_mask = 0xfffffff0, ++ .name = "Aquantia AQR106", ++ .features = PHY_AQUANTIA_FEATURES, ++ .flags = PHY_HAS_INTERRUPT, ++ .aneg_done = aquantia_aneg_done, ++ .config_aneg = aquantia_config_aneg, ++ .config_intr = aquantia_config_intr, ++ .ack_interrupt = aquantia_ack_interrupt, ++ .read_status = aquantia_read_status, ++ .driver = { .owner = THIS_MODULE,}, ++}, ++{ ++ .phy_id = PHY_ID_AQR107, ++ .phy_id_mask = 0xfffffff0, ++ .name = "Aquantia AQR107", ++ .features = PHY_AQUANTIA_FEATURES, ++ .flags = PHY_HAS_INTERRUPT, ++ .aneg_done = aquantia_aneg_done, ++ .config_aneg = aquantia_config_aneg, ++ .config_intr = aquantia_config_intr, ++ .ack_interrupt = aquantia_ack_interrupt, ++ .read_status = aquantia_read_status, ++ .driver = { .owner = THIS_MODULE,}, ++}, ++{ + .phy_id = PHY_ID_AQR405, + .phy_id_mask = 0xfffffff0, + .name = "Aquantia AQR405", +@@ -177,6 +205,8 @@ static struct mdio_device_id __maybe_unu + { PHY_ID_AQ1202, 0xfffffff0 }, + { PHY_ID_AQ2104, 0xfffffff0 }, + { PHY_ID_AQR105, 0xfffffff0 }, ++ { PHY_ID_AQR106, 0xfffffff0 }, ++ { PHY_ID_AQR107, 0xfffffff0 }, + { PHY_ID_AQR405, 0xfffffff0 }, + { } + }; diff --git a/target/linux/layerscape/patches-4.4/8125-rtc-pcf2127-add-pcf2129-device-id.patch b/target/linux/layerscape/patches-4.4/8125-rtc-pcf2127-add-pcf2129-device-id.patch new file mode 100644 index 0000000000..6ece59771a --- /dev/null +++ b/target/linux/layerscape/patches-4.4/8125-rtc-pcf2127-add-pcf2129-device-id.patch @@ -0,0 +1,63 @@ +From 228d15f0c525d1d62540539ebb8d311feddb79f5 Mon Sep 17 00:00:00 2001 +From: Akinobu Mita +Date: Mon, 26 Sep 2016 11:26:11 +0800 +Subject: [PATCH 125/141] rtc: pcf2127: add pcf2129 device id + +commit e8bf83a7f9454ed1026f100139ebd10eace0e280 +[context adjustment] + +There are only a few differences between PCF2127 and PCF2129 (PCF2127 +has 512 bytes of general purpose SRAM and count-down timer). + +The rtc-pcf2127 driver currently doesn't use the PCF2127 specific +functionality and Kconfig help text already says this driver supports +PCF2127/29, so we can simply add pcf2129 to device id list. + +Signed-off-by: Akinobu Mita +Signed-off-by: Alexandre Belloni +Signed-off-by: Shaohui Xie +Integrated-by: Zhao Qiang +--- + drivers/rtc/rtc-pcf2127.c | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +--- a/drivers/rtc/rtc-pcf2127.c ++++ b/drivers/rtc/rtc-pcf2127.c +@@ -1,12 +1,12 @@ + /* +- * An I2C driver for the NXP PCF2127 RTC ++ * An I2C and SPI driver for the NXP PCF2127/29 RTC + * Copyright 2013 Til-Technologies + * + * Author: Renaud Cerrato + * + * based on the other drivers in this same directory. + * +- * http://www.nxp.com/documents/data_sheet/PCF2127AT.pdf ++ * Datasheet: http://cache.nxp.com/documents/data_sheet/PCF2127.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as +@@ -216,6 +216,7 @@ static int pcf2127_probe(struct i2c_clie + + static const struct i2c_device_id pcf2127_id[] = { + { "pcf2127", 0 }, ++ { "pcf2129", 0 }, + { } + }; + MODULE_DEVICE_TABLE(i2c, pcf2127_id); +@@ -223,6 +224,7 @@ MODULE_DEVICE_TABLE(i2c, pcf2127_id); + #ifdef CONFIG_OF + static const struct of_device_id pcf2127_of_match[] = { + { .compatible = "nxp,pcf2127" }, ++ { .compatible = "nxp,pcf2129" }, + {} + }; + MODULE_DEVICE_TABLE(of, pcf2127_of_match); +@@ -240,5 +242,5 @@ static struct i2c_driver pcf2127_driver + module_i2c_driver(pcf2127_driver); + + MODULE_AUTHOR("Renaud Cerrato "); +-MODULE_DESCRIPTION("NXP PCF2127 RTC driver"); ++MODULE_DESCRIPTION("NXP PCF2127/29 RTC driver"); + MODULE_LICENSE("GPL v2"); diff --git a/target/linux/layerscape/patches-4.4/8127-ls1046a-msi-Add-LS1046A-MSI-support.patch b/target/linux/layerscape/patches-4.4/8127-ls1046a-msi-Add-LS1046A-MSI-support.patch new file mode 100644 index 0000000000..a3850c706f --- /dev/null +++ b/target/linux/layerscape/patches-4.4/8127-ls1046a-msi-Add-LS1046A-MSI-support.patch @@ -0,0 +1,25 @@ +From 51ab89c787184d47dbff37c3c69ea2c82cc4749c Mon Sep 17 00:00:00 2001 +From: Mingkai Hu +Date: Mon, 26 Sep 2016 12:13:56 +0800 +Subject: [PATCH 127/141] ls1046a/msi: Add LS1046A MSI support + +commit 2b5a00d46a8f8762b9f78b727eab6fc0e12f3fd7 +[context adjustment] + +Signed-off-by: Mingkai Hu +Integated-by: Zhao Qiang +Integated-by: Yutang Jiang +--- + drivers/irqchip/irq-ls-scfg-msi.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/irqchip/irq-ls-scfg-msi.c ++++ b/drivers/irqchip/irq-ls-scfg-msi.c +@@ -222,6 +222,7 @@ static const struct of_device_id ls_scfg + { .compatible = "fsl,ls1012a-msi", }, + { .compatible = "fsl,1s1021a-msi", }, + { .compatible = "fsl,1s1043a-msi", }, ++ { .compatible = "fsl,ls1046a-msi", }, + {}, + }; + diff --git a/target/linux/layerscape/patches-4.4/8128-pci-layerscape-add-LS1046A-support.patch b/target/linux/layerscape/patches-4.4/8128-pci-layerscape-add-LS1046A-support.patch new file mode 100644 index 0000000000..0a9f296553 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/8128-pci-layerscape-add-LS1046A-support.patch @@ -0,0 +1,38 @@ +From 5a95e58e58da417ca8a8f4ae11347ad9a66803cd Mon Sep 17 00:00:00 2001 +From: Mingkai Hu +Date: Mon, 26 Sep 2016 12:17:36 +0800 +Subject: [PATCH 128/141] pci/layerscape: add LS1046A support + +commit a52797fe443a79c53d0b63c505c99f65264de8b7 +[context adjustment] + +Signed-off-by: Mingkai Hu +Integrated-by: Zhao Qiang +Integrated-by: Yutang Jiang +--- + drivers/pci/host/pci-layerscape.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/drivers/pci/host/pci-layerscape.c ++++ b/drivers/pci/host/pci-layerscape.c +@@ -205,6 +205,12 @@ static struct ls_pcie_drvdata ls1043_drv + .ops = &ls_pcie_host_ops, + }; + ++static struct ls_pcie_drvdata ls1046_drvdata = { ++ .lut_offset = 0x10000, ++ .ltssm_shift = 24, ++ .ops = &ls_pcie_host_ops, ++}; ++ + static struct ls_pcie_drvdata ls2080_drvdata = { + .lut_offset = 0x80000, + .ltssm_shift = 0, +@@ -215,6 +221,7 @@ static const struct of_device_id ls_pcie + { .compatible = "fsl,ls1012a-pcie", .data = &ls1012_drvdata }, + { .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata }, + { .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata }, ++ { .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata }, + { .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata }, + { .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata }, + { }, diff --git a/target/linux/layerscape/patches-4.4/8129-clk-qoriq-add-ls1046a-support.patch b/target/linux/layerscape/patches-4.4/8129-clk-qoriq-add-ls1046a-support.patch new file mode 100644 index 0000000000..8dd5cdbc8e --- /dev/null +++ b/target/linux/layerscape/patches-4.4/8129-clk-qoriq-add-ls1046a-support.patch @@ -0,0 +1,75 @@ +From 4fe33d4f4dc608fc5013390db58df06723282d01 Mon Sep 17 00:00:00 2001 +From: Mingkai Hu +Date: Thu, 2 Jun 2016 11:15:58 +0800 +Subject: [PATCH 129/141] clk: qoriq: add ls1046a support + +Signed-off-by: Mingkai Hu +Integated-by: Yutang Jiang +--- + drivers/clk/clk-qoriq.c | 41 +++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 41 insertions(+) + +--- a/drivers/clk/clk-qoriq.c ++++ b/drivers/clk/clk-qoriq.c +@@ -275,6 +275,31 @@ static const struct clockgen_muxinfo ls1 + }, + }; + ++static const struct clockgen_muxinfo ls1046a_hwa1 = { ++ { ++ {}, ++ {}, ++ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, ++ { CLKSEL_VALID, CGA_PLL1, PLL_DIV3 }, ++ { CLKSEL_VALID, CGA_PLL1, PLL_DIV4 }, ++ { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 }, ++ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, ++ { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 }, ++ }, ++}; ++ ++static const struct clockgen_muxinfo ls1046a_hwa2 = { ++ { ++ {}, ++ { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 }, ++ { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 }, ++ { CLKSEL_VALID, CGA_PLL2, PLL_DIV3 }, ++ {}, ++ {}, ++ { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, ++ }, ++}; ++ + static const struct clockgen_muxinfo t1023_hwa1 = { + { + {}, +@@ -508,6 +533,21 @@ static const struct clockgen_chipinfo ch + .flags = CG_PLL_8BIT, + }, + { ++ .compat = "fsl,ls1046a-clockgen", ++ .init_periph = t2080_init_periph, ++ .cmux_groups = { ++ &t1040_cmux ++ }, ++ .hwaccel = { ++ &ls1046a_hwa1, &ls1046a_hwa2 ++ }, ++ .cmux_to_group = { ++ 0, -1 ++ }, ++ .pll_mask = 0x07, ++ .flags = CG_PLL_8BIT, ++ }, ++ { + .compat = "fsl,ls2080a-clockgen", + .cmux_groups = { + &clockgen2_cmux_cga12, &clockgen2_cmux_cgb +@@ -1285,6 +1325,7 @@ CLK_OF_DECLARE(qoriq_clockgen_1, "fsl,qo + CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init); + CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init); + CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init); ++CLK_OF_DECLARE(qoriq_clockgen_ls1046a, "fsl,ls1046a-clockgen", clockgen_init); + CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init); + CLK_OF_DECLARE(qoriq_clockgen_ls1012a, "fsl,ls1012a-clockgen", clockgen_init); + diff --git a/target/linux/layerscape/patches-4.4/8130-ls1046a-sata-Add-LS1046A-sata-support.patch b/target/linux/layerscape/patches-4.4/8130-ls1046a-sata-Add-LS1046A-sata-support.patch new file mode 100644 index 0000000000..ea384e6bd9 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/8130-ls1046a-sata-Add-LS1046A-sata-support.patch @@ -0,0 +1,53 @@ +From 5cd461cd17c3e27e5501e499d5d865b60ee58257 Mon Sep 17 00:00:00 2001 +From: Gong Qianyu +Date: Mon, 26 Sep 2016 12:29:24 +0800 +Subject: [PATCH 130/141] ls1046a/sata: Add LS1046A sata support + +Signed-off-by: Gong Qianyu +Integrated-by: Zhao Qiang +Integated-by: Yutang Jiang +--- + drivers/ata/ahci_qoriq.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/drivers/ata/ahci_qoriq.c ++++ b/drivers/ata/ahci_qoriq.c +@@ -40,11 +40,16 @@ + #define AHCI_PORT_PHY_5_CFG 0x192c96a4 + #define AHCI_PORT_TRANS_CFG 0x08000025 + ++/* for ls1046a */ ++#define LS1046A_PORT_PHY2 0x28184d1f ++#define LS1046A_PORT_PHY3 0x0e081509 ++ + #define SATA_ECC_DISABLE 0x00020000 + + enum ahci_qoriq_type { + AHCI_LS1021A, + AHCI_LS1043A, ++ AHCI_LS1046A, + AHCI_LS2080A, + }; + +@@ -57,6 +62,7 @@ struct ahci_qoriq_priv { + static const struct of_device_id ahci_qoriq_of_match[] = { + { .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A}, + { .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A}, ++ { .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A}, + { .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A}, + {}, + }; +@@ -158,6 +164,13 @@ static int ahci_qoriq_phy_init(struct ah + writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); + break; + ++ case AHCI_LS1046A: ++ writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); ++ writel(LS1046A_PORT_PHY2, reg_base + PORT_PHY2); ++ writel(LS1046A_PORT_PHY3, reg_base + PORT_PHY3); ++ writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); ++ break; ++ + case AHCI_LS1043A: + case AHCI_LS2080A: + writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); diff --git a/target/linux/layerscape/patches-4.4/8134-pci-layerscape-add-LUT-DBG-reigster-offset-member.patch b/target/linux/layerscape/patches-4.4/8134-pci-layerscape-add-LUT-DBG-reigster-offset-member.patch new file mode 100644 index 0000000000..4f7f515a24 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/8134-pci-layerscape-add-LUT-DBG-reigster-offset-member.patch @@ -0,0 +1,67 @@ +From 57d147c02fdcbae5e61ba322d51c5734f9511fd7 Mon Sep 17 00:00:00 2001 +From: Mingkai Hu +Date: Mon, 26 Sep 2016 14:19:32 +0800 +Subject: [PATCH 134/141] pci/layerscape: add LUT DBG reigster offset member + +commit 59ab37d6f46356a5b9755fcec74b23616dfdd62f +[doesn't apply pm part] + +Different chip have different LUT debug register offset, +so add a member to avoid macro redifinition. + +Signed-off-by: Mingkai Hu +Integrated-by: Zhao Qiang +Integrated-by: Yutang Jiang +--- + drivers/pci/host/pci-layerscape.c | 8 ++++++-- + 1 file changed, 6 insertions(+), 2 deletions(-) + +--- a/drivers/pci/host/pci-layerscape.c ++++ b/drivers/pci/host/pci-layerscape.c +@@ -41,6 +41,7 @@ + struct ls_pcie_drvdata { + u32 lut_offset; + u32 ltssm_shift; ++ u32 lut_dbg; + struct pcie_host_ops *ops; + }; + +@@ -134,7 +135,7 @@ static int ls_pcie_link_up(struct pcie_p + struct ls_pcie *pcie = to_ls_pcie(pp); + u32 state; + +- state = (ioread32(pcie->lut + PCIE_LUT_DBG) >> ++ state = (ioread32(pcie->lut + pcie->drvdata->lut_dbg) >> + pcie->drvdata->ltssm_shift) & + LTSSM_STATE_MASK; + +@@ -196,24 +197,28 @@ static struct ls_pcie_drvdata ls1021_drvdata = { + static struct ls_pcie_drvdata ls1012_drvdata = { + .lut_offset = 0xC0000, + .ltssm_shift = 24, ++ .lut_dbg = 0x7fc, + .ops = &ls_pcie_host_ops, + }; + + static struct ls_pcie_drvdata ls1043_drvdata = { + .lut_offset = 0x10000, + .ltssm_shift = 24, ++ .lut_dbg = 0x7fc, + .ops = &ls_pcie_host_ops, + }; + + static struct ls_pcie_drvdata ls1046_drvdata = { +- .lut_offset = 0x10000, ++ .lut_offset = 0x80000, + .ltssm_shift = 24, ++ .lut_dbg = 0x407fc, + .ops = &ls_pcie_host_ops, + }; + + static struct ls_pcie_drvdata ls2080_drvdata = { + .lut_offset = 0x80000, + .ltssm_shift = 0, ++ .lut_dbg = 0x7fc, + .ops = &ls_pcie_host_ops, + }; + diff --git a/target/linux/layerscape/patches-4.4/8138-pci-layerscape-add-MSI-interrupt-support.patch b/target/linux/layerscape/patches-4.4/8138-pci-layerscape-add-MSI-interrupt-support.patch new file mode 100644 index 0000000000..fd597e5737 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/8138-pci-layerscape-add-MSI-interrupt-support.patch @@ -0,0 +1,259 @@ +From b0e74277164b17bb0d207ffe16056e13e558f6ba Mon Sep 17 00:00:00 2001 +From: Zhao Qiang +Date: Tue, 11 Oct 2016 16:25:07 +0800 +Subject: [PATCH 138/141] pci-layerscape: add MSI interrupt support + +Signed-off-by: Zhao Qiang +--- + drivers/iommu/amd_iommu.c | 5 +++-- + drivers/iommu/arm-smmu.c | 21 ++++++++++++++++++ + drivers/iommu/iommu.c | 8 +++---- + drivers/pci/host/pci-layerscape.c | 43 +++++++++++++++++++++++++++++++++++++ + drivers/pci/host/pci-layerscape.h | 17 +++++++++++++++ + drivers/pci/quirks.c | 19 +++++++++------- + drivers/pci/search.c | 5 ++--- + include/linux/pci.h | 6 +++--- + 8 files changed, 104 insertions(+), 20 deletions(-) + create mode 100644 drivers/pci/host/pci-layerscape.h + +--- a/drivers/iommu/amd_iommu.c ++++ b/drivers/iommu/amd_iommu.c +@@ -222,8 +222,9 @@ static u16 get_alias(struct device *dev) + */ + if (pci_alias == devid && + PCI_BUS_NUM(ivrs_alias) == pdev->bus->number) { +- pdev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; +- pdev->dma_alias_devfn = ivrs_alias & 0xff; ++ pdev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVID; ++ pdev->dma_alias_devid = PCI_DEVID(pdev->bus->number, ++ ivrs_alias & 0xff); + pr_info("AMD-Vi: Added PCI DMA alias %02x.%d for %s\n", + PCI_SLOT(ivrs_alias), PCI_FUNC(ivrs_alias), + dev_name(dev)); +--- a/drivers/iommu/arm-smmu.c ++++ b/drivers/iommu/arm-smmu.c +@@ -45,6 +45,10 @@ + + #include + ++#ifdef CONFIG_PCI_LAYERSCAPE ++#include <../drivers/pci/host/pci-layerscape.h> ++#endif ++ + #include "io-pgtable.h" + + /* Maximum number of stream IDs assigned to a single device */ +@@ -1352,6 +1356,23 @@ static int arm_smmu_init_platform_device + static int arm_smmu_add_device(struct device *dev) + { + struct iommu_group *group; ++#ifdef CONFIG_PCI_LAYERSCAPE ++ u16 sid; ++ u32 streamid; ++ struct pci_dev *pdev; ++ if (dev_is_pci(dev)) { ++ pdev = to_pci_dev(dev); ++ ++ pci_for_each_dma_alias(pdev, __arm_smmu_get_pci_sid, &sid); ++ streamid = set_pcie_streamid_translation(pdev, sid); ++ if (~streamid == 0) { ++ return -ENODEV; ++ } ++ ++ pdev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVID; ++ pdev->dma_alias_devid = streamid; ++ } ++#endif + + group = iommu_group_get_for_dev(dev); + if (IS_ERR(group)) +--- a/drivers/iommu/iommu.c ++++ b/drivers/iommu/iommu.c +@@ -686,10 +686,10 @@ static struct iommu_group *get_pci_alias + continue; + + /* We alias them or they alias us */ +- if (((pdev->dev_flags & PCI_DEV_FLAGS_DMA_ALIAS_DEVFN) && +- pdev->dma_alias_devfn == tmp->devfn) || +- ((tmp->dev_flags & PCI_DEV_FLAGS_DMA_ALIAS_DEVFN) && +- tmp->dma_alias_devfn == pdev->devfn)) { ++ if (((pdev->dev_flags & PCI_DEV_FLAGS_DMA_ALIAS_DEVID) && ++ (pdev->dma_alias_devid & 0xff) == tmp->devfn) || ++ ((tmp->dev_flags & PCI_DEV_FLAGS_DMA_ALIAS_DEVID) && ++ (tmp->dma_alias_devid & 0xff) == pdev->devfn)) { + + group = get_pci_alias_group(tmp, devfns); + if (group) { +--- a/drivers/pci/host/pci-layerscape.c ++++ b/drivers/pci/host/pci-layerscape.c +@@ -37,6 +37,11 @@ + + /* PEX LUT registers */ + #define PCIE_LUT_DBG 0x7FC /* PEX LUT Debug Register */ ++#define PCIE_LUT_UDR(n) (0x800 + (n) * 8) ++#define PCIE_LUT_LDR(n) (0x804 + (n) * 8) ++#define PCIE_LUT_MASK_ALL 0xffff ++#define PCIE_LUT_DR_NUM 32 ++#define PCIE_LUT_ENABLE (1 << 31) + + struct ls_pcie_drvdata { + u32 lut_offset; +@@ -52,10 +57,30 @@ struct ls_pcie { + struct pcie_port pp; + const struct ls_pcie_drvdata *drvdata; + int index; ++ const u32 *avail_streamids; ++ int streamid_index; + }; + + #define to_ls_pcie(x) container_of(x, struct ls_pcie, pp) + ++u32 set_pcie_streamid_translation(struct pci_dev *pdev, u32 devid) ++{ ++ u32 index, streamid; ++ struct pcie_port *pp = pdev->bus->sysdata; ++ struct ls_pcie *pcie = to_ls_pcie(pp); ++ ++ if (!pcie->avail_streamids || !pcie->streamid_index) ++ return ~(u32)0; ++ ++ index = --pcie->streamid_index; ++ /* mask is set as all zeroes, want to match all bits */ ++ iowrite32((devid << 16), pcie->lut + PCIE_LUT_UDR(index)); ++ streamid = be32_to_cpup(&pcie->avail_streamids[index]); ++ iowrite32(streamid | PCIE_LUT_ENABLE, pcie->lut + PCIE_LUT_LDR(index)); ++ ++ return streamid; ++} ++ + static bool ls_pcie_is_bridge(struct ls_pcie *pcie) + { + u32 header_type; +@@ -283,10 +308,28 @@ static int __init ls_pcie_probe(struct p + + pcie->drvdata = match->data; + pcie->lut = pcie->dbi + pcie->drvdata->lut_offset; ++ /* Disable LDR zero */ ++ iowrite32(0, pcie->lut + PCIE_LUT_LDR(0)); + + if (!ls_pcie_is_bridge(pcie)) + return -ENODEV; + ++ if (of_device_is_compatible(pdev->dev.of_node, "fsl,ls2085a-pcie") || ++ of_device_is_compatible(pdev->dev.of_node, "fsl,ls2080a-pcie") || ++ of_device_is_compatible(pdev->dev.of_node, "fsl,ls1088a-pcie")) { ++ int len; ++ const u32 *prop; ++ struct device_node *np; ++ ++ np = pdev->dev.of_node; ++ prop = (u32 *)of_get_property(np, "available-stream-ids", &len); ++ if (prop) { ++ pcie->avail_streamids = prop; ++ pcie->streamid_index = len/sizeof(u32); ++ } else ++ dev_err(&pdev->dev, "PCIe endpoint partitioning not possible\n"); ++ } ++ + ret = ls_add_pcie_port(&pcie->pp, pdev); + if (ret < 0) + return ret; +--- /dev/null ++++ b/drivers/pci/host/pci-layerscape.h +@@ -0,0 +1,17 @@ ++/* ++ * Copyright (C) 2015 Freescale Semiconductor. ++ * ++ * Author: Varun Sethi ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef _PCI_LAYERSCAPE_H ++#define _PCI_LAYERSCAPE_H ++ ++/* function for setting up stream id to device id translation */ ++u32 set_pcie_streamid_translation(struct pci_dev *pdev, u32 devid); ++ ++#endif /* _PCI_LAYERSCAPE_H */ +--- a/drivers/pci/quirks.c ++++ b/drivers/pci/quirks.c +@@ -3589,8 +3589,9 @@ int pci_dev_specific_reset(struct pci_de + static void quirk_dma_func0_alias(struct pci_dev *dev) + { + if (PCI_FUNC(dev->devfn) != 0) { +- dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0); +- dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; ++ dev->dma_alias_devid = PCI_DEVID(dev->bus->number, ++ PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); ++ dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVID; + } + } + +@@ -3605,8 +3606,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_R + static void quirk_dma_func1_alias(struct pci_dev *dev) + { + if (PCI_FUNC(dev->devfn) != 1) { +- dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 1); +- dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; ++ dev->dma_alias_devid = PCI_DEVID(dev->bus->number, ++ PCI_DEVFN(PCI_SLOT(dev->devfn), 1)); ++ dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVID; + } + } + +@@ -3670,11 +3672,12 @@ static void quirk_fixed_dma_alias(struct + + id = pci_match_id(fixed_dma_alias_tbl, dev); + if (id) { +- dev->dma_alias_devfn = id->driver_data; +- dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; ++ dev->dma_alias_devid = PCI_DEVID(dev->bus->number, ++ id->driver_data); ++ dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVID; + dev_info(&dev->dev, "Enabling fixed DMA alias to %02x.%d\n", +- PCI_SLOT(dev->dma_alias_devfn), +- PCI_FUNC(dev->dma_alias_devfn)); ++ PCI_SLOT(dev->dma_alias_devid), ++ PCI_FUNC(dev->dma_alias_devid)); + } + } + +--- a/drivers/pci/search.c ++++ b/drivers/pci/search.c +@@ -40,9 +40,8 @@ int pci_for_each_dma_alias(struct pci_de + * If the device is broken and uses an alias requester ID for + * DMA, iterate over that too. + */ +- if (unlikely(pdev->dev_flags & PCI_DEV_FLAGS_DMA_ALIAS_DEVFN)) { +- ret = fn(pdev, PCI_DEVID(pdev->bus->number, +- pdev->dma_alias_devfn), data); ++ if (unlikely(pdev->dev_flags & PCI_DEV_FLAGS_DMA_ALIAS_DEVID)) { ++ ret = fn(pdev, pdev->dma_alias_devid, data); + if (ret) + return ret; + } +--- a/include/linux/pci.h ++++ b/include/linux/pci.h +@@ -172,8 +172,8 @@ enum pci_dev_flags { + PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) (1 << 2), + /* Flag for quirk use to store if quirk-specific ACS is enabled */ + PCI_DEV_FLAGS_ACS_ENABLED_QUIRK = (__force pci_dev_flags_t) (1 << 3), +- /* Flag to indicate the device uses dma_alias_devfn */ +- PCI_DEV_FLAGS_DMA_ALIAS_DEVFN = (__force pci_dev_flags_t) (1 << 4), ++ /* Flag to indicate the device uses dma_alias_devid */ ++ PCI_DEV_FLAGS_DMA_ALIAS_DEVID = (__force pci_dev_flags_t) (1 << 4), + /* Use a PCIe-to-PCI bridge alias even if !pci_is_pcie */ + PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS = (__force pci_dev_flags_t) (1 << 5), + /* Do not use bus resets for device */ +@@ -279,7 +279,7 @@ struct pci_dev { + u8 rom_base_reg; /* which config register controls the ROM */ + u8 pin; /* which interrupt pin this device uses */ + u16 pcie_flags_reg; /* cached PCIe Capabilities Register */ +- u8 dma_alias_devfn;/* devfn of DMA alias, if any */ ++ u32 dma_alias_devid;/* devid of DMA alias */ + + struct pci_driver *driver; /* which driver has allocated this device */ + u64 dma_mask; /* Mask of the bits of bus address this diff --git a/target/linux/layerscape/patches-4.4/8142-drivers-mmc-Add-compatible-string-for-LS1046A.patch b/target/linux/layerscape/patches-4.4/8142-drivers-mmc-Add-compatible-string-for-LS1046A.patch new file mode 100644 index 0000000000..d86de8b669 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/8142-drivers-mmc-Add-compatible-string-for-LS1046A.patch @@ -0,0 +1,25 @@ +From 81c67bb120106c4fbd9b7191ab057b48e13e3e5e Mon Sep 17 00:00:00 2001 +From: Yutang Jiang +Date: Tue, 8 Nov 2016 01:27:50 +0800 +Subject: [PATCH 142/142] drivers/mmc: Add compatible string for LS1046A + +Signed-off-by: Yutang Jiang +--- + drivers/mmc/host/sdhci-of-esdhc.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c +index a04ed4e..1116d38 100644 +--- a/drivers/mmc/host/sdhci-of-esdhc.c ++++ b/drivers/mmc/host/sdhci-of-esdhc.c +@@ -607,6 +607,7 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) + of_device_is_compatible(np, "fsl,p4080-esdhc") || + of_device_is_compatible(np, "fsl,p1020-esdhc") || + of_device_is_compatible(np, "fsl,t1040-esdhc") || ++ of_device_is_compatible(np, "fsl,ls1046a-esdhc") || + of_device_is_compatible(np, "fsl,ls1021a-esdhc")) + host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; + +-- +1.7.9.5 +