From: Daniel Golle Date: Thu, 17 Oct 2024 12:33:18 +0000 (+0100) Subject: generic: import and move accepted RealTek PHY patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=abda39d86d8f8a48b6fc324a5e2eebe3e8387c2e;p=openwrt%2Fstaging%2Fwigyori.git generic: import and move accepted RealTek PHY patches Import commits from upstream Linux and move/rename existing patches which have been acceped. Signed-off-by: Daniel Golle --- diff --git a/target/linux/generic/backport-6.6/781-13-v6.12-net-phy-realtek-Check-the-index-value-in-led_hw_cont.patch b/target/linux/generic/backport-6.6/781-13-v6.12-net-phy-realtek-Check-the-index-value-in-led_hw_cont.patch new file mode 100644 index 0000000000..a6f8b6d1c5 --- /dev/null +++ b/target/linux/generic/backport-6.6/781-13-v6.12-net-phy-realtek-Check-the-index-value-in-led_hw_cont.patch @@ -0,0 +1,32 @@ +From c283782fc5d60c4d8169137c6f955aa3553d3b3d Mon Sep 17 00:00:00 2001 +From: Hui Wang +Date: Fri, 27 Sep 2024 19:46:10 +0800 +Subject: [PATCH] net: phy: realtek: Check the index value in + led_hw_control_get + +Just like rtl8211f_led_hw_is_supported() and +rtl8211f_led_hw_control_set(), the rtl8211f_led_hw_control_get() also +needs to check the index value, otherwise the caller is likely to get +an incorrect rules. + +Fixes: 17784801d888 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F") +Signed-off-by: Hui Wang +Reviewed-by: Marek Vasut +Link: https://patch.msgid.link/20240927114610.1278935-1-hui.wang@canonical.com +Signed-off-by: Jakub Kicinski +--- + drivers/net/phy/realtek.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/net/phy/realtek.c ++++ b/drivers/net/phy/realtek.c +@@ -527,6 +527,9 @@ static int rtl8211f_led_hw_control_get(s + { + int val; + ++ if (index >= RTL8211F_LED_COUNT) ++ return -EINVAL; ++ + val = phy_read_paged(phydev, 0xd04, RTL8211F_LEDCR); + if (val < 0) + return val; diff --git a/target/linux/generic/backport-6.6/781-14-v6.12-net-phy-realtek-Fix-MMD-access-on-RTL8126A-integrate.patch b/target/linux/generic/backport-6.6/781-14-v6.12-net-phy-realtek-Fix-MMD-access-on-RTL8126A-integrate.patch new file mode 100644 index 0000000000..b50e133a67 --- /dev/null +++ b/target/linux/generic/backport-6.6/781-14-v6.12-net-phy-realtek-Fix-MMD-access-on-RTL8126A-integrate.patch @@ -0,0 +1,67 @@ +From a6ad589c1d118f9d5b1bc4c6888d42919f830340 Mon Sep 17 00:00:00 2001 +From: Heiner Kallweit +Date: Mon, 7 Oct 2024 11:57:41 +0200 +Subject: [PATCH] net: phy: realtek: Fix MMD access on RTL8126A-integrated PHY + +All MMD reads return 0 for the RTL8126A-integrated PHY. Therefore phylib +assumes it doesn't support EEE, what results in higher power consumption, +and a significantly higher chip temperature in my case. +To fix this split out the PHY driver for the RTL8126A-integrated PHY +and set the read_mmd/write_mmd callbacks to read from vendor-specific +registers. + +Fixes: 5befa3728b85 ("net: phy: realtek: add support for RTL8126A-integrated 5Gbps PHY") +Cc: stable@vger.kernel.org +Signed-off-by: Heiner Kallweit +Signed-off-by: David S. Miller +--- + drivers/net/phy/realtek.c | 24 +++++++++++++++++++++++- + 1 file changed, 23 insertions(+), 1 deletion(-) + +--- a/drivers/net/phy/realtek.c ++++ b/drivers/net/phy/realtek.c +@@ -1081,6 +1081,16 @@ static int rtl8221b_vn_cg_c45_match_phy_ + return rtlgen_is_c45_match(phydev, RTL_8221B_VN_CG, true); + } + ++static int rtl8251b_c22_match_phy_device(struct phy_device *phydev) ++{ ++ return rtlgen_is_c45_match(phydev, RTL_8251B, false); ++} ++ ++static int rtl8251b_c45_match_phy_device(struct phy_device *phydev) ++{ ++ return rtlgen_is_c45_match(phydev, RTL_8251B, true); ++} ++ + static int rtlgen_resume(struct phy_device *phydev) + { + int ret = genphy_resume(phydev); +@@ -1418,7 +1428,7 @@ static struct phy_driver realtek_drvs[] + .suspend = genphy_c45_pma_suspend, + .resume = rtlgen_c45_resume, + }, { +- PHY_ID_MATCH_EXACT(0x001cc862), ++ .match_phy_device = rtl8251b_c45_match_phy_device, + .name = "RTL8251B 5Gbps PHY", + .get_features = rtl822x_get_features, + .config_aneg = rtl822x_config_aneg, +@@ -1428,6 +1438,18 @@ static struct phy_driver realtek_drvs[] + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { ++ .match_phy_device = rtl8251b_c22_match_phy_device, ++ .name = "RTL8126A-internal 5Gbps PHY", ++ .get_features = rtl822x_get_features, ++ .config_aneg = rtl822x_config_aneg, ++ .read_status = rtl822x_read_status, ++ .suspend = genphy_suspend, ++ .resume = rtlgen_resume, ++ .read_page = rtl821x_read_page, ++ .write_page = rtl821x_write_page, ++ .read_mmd = rtl822x_read_mmd, ++ .write_mmd = rtl822x_write_mmd, ++ }, { + PHY_ID_MATCH_EXACT(0x001ccad0), + .name = "RTL8224 2.5Gbps PHY", + .get_features = rtl822x_c45_get_features, diff --git a/target/linux/generic/backport-6.6/781-15-v6.13-net-phy-realtek-read-duplex-and-gbit-master-from-PHY.patch b/target/linux/generic/backport-6.6/781-15-v6.13-net-phy-realtek-read-duplex-and-gbit-master-from-PHY.patch new file mode 100644 index 0000000000..e15218b169 --- /dev/null +++ b/target/linux/generic/backport-6.6/781-15-v6.13-net-phy-realtek-read-duplex-and-gbit-master-from-PHY.patch @@ -0,0 +1,106 @@ +From 081c9c0265c91b8333165aa6230c20bcbc6f7cbf Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Thu, 10 Oct 2024 14:07:16 +0100 +Subject: [PATCH 3/5] net: phy: realtek: read duplex and gbit master from PHYSR + register + +The PHYSR MMD register is present and defined equally for all RTL82xx +Ethernet PHYs. +Read duplex and Gbit master bits from rtlgen_decode_speed() and rename +it to rtlgen_decode_physr(). + +Signed-off-by: Daniel Golle +Link: https://patch.msgid.link/b9a76341da851a18c985bc4774fa295babec79bb.1728565530.git.daniel@makrotopia.org +Signed-off-by: Paolo Abeni +--- + drivers/net/phy/realtek.c | 41 +++++++++++++++++++++++++++++++-------- + 1 file changed, 33 insertions(+), 8 deletions(-) + +--- a/drivers/net/phy/realtek.c ++++ b/drivers/net/phy/realtek.c +@@ -80,15 +80,18 @@ + + #define RTL822X_VND2_GANLPAR 0xa414 + +-#define RTL822X_VND2_PHYSR 0xa434 +- + #define RTL8366RB_POWER_SAVE 0x15 + #define RTL8366RB_POWER_SAVE_ON BIT(12) + + #define RTL9000A_GINMR 0x14 + #define RTL9000A_GINMR_LINK_STATUS BIT(4) + +-#define RTLGEN_SPEED_MASK 0x0630 ++#define RTL_VND2_PHYSR 0xa434 ++#define RTL_VND2_PHYSR_DUPLEX BIT(3) ++#define RTL_VND2_PHYSR_SPEEDL GENMASK(5, 4) ++#define RTL_VND2_PHYSR_SPEEDH GENMASK(10, 9) ++#define RTL_VND2_PHYSR_MASTER BIT(11) ++#define RTL_VND2_PHYSR_SPEED_MASK (RTL_VND2_PHYSR_SPEEDL | RTL_VND2_PHYSR_SPEEDH) + + #define RTL_GENERIC_PHYID 0x001cc800 + #define RTL_8211FVD_PHYID 0x001cc878 +@@ -660,9 +663,18 @@ static int rtl8366rb_config_init(struct + } + + /* get actual speed to cover the downshift case */ +-static void rtlgen_decode_speed(struct phy_device *phydev, int val) ++static void rtlgen_decode_physr(struct phy_device *phydev, int val) + { +- switch (val & RTLGEN_SPEED_MASK) { ++ /* bit 3 ++ * 0: Half Duplex ++ * 1: Full Duplex ++ */ ++ if (val & RTL_VND2_PHYSR_DUPLEX) ++ phydev->duplex = DUPLEX_FULL; ++ else ++ phydev->duplex = DUPLEX_HALF; ++ ++ switch (val & RTL_VND2_PHYSR_SPEED_MASK) { + case 0x0000: + phydev->speed = SPEED_10; + break; +@@ -684,6 +696,19 @@ static void rtlgen_decode_speed(struct p + default: + break; + } ++ ++ /* bit 11 ++ * 0: Slave Mode ++ * 1: Master Mode ++ */ ++ if (phydev->speed >= 1000) { ++ if (val & RTL_VND2_PHYSR_MASTER) ++ phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER; ++ else ++ phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE; ++ } else { ++ phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED; ++ } + } + + static int rtlgen_read_status(struct phy_device *phydev) +@@ -701,7 +726,7 @@ static int rtlgen_read_status(struct phy + if (val < 0) + return val; + +- rtlgen_decode_speed(phydev, val); ++ rtlgen_decode_physr(phydev, val); + + return 0; + } +@@ -1007,11 +1032,11 @@ static int rtl822x_c45_read_status(struc + return 0; + + /* Read actual speed from vendor register. */ +- val = phy_read_mmd(phydev, MDIO_MMD_VEND2, RTL822X_VND2_PHYSR); ++ val = phy_read_mmd(phydev, MDIO_MMD_VEND2, RTL_VND2_PHYSR); + if (val < 0) + return val; + +- rtlgen_decode_speed(phydev, val); ++ rtlgen_decode_physr(phydev, val); + + return 0; + } diff --git a/target/linux/generic/backport-6.6/781-16-v6.13-net-phy-realtek-change-order-of-calls-in-C22-read_st.patch b/target/linux/generic/backport-6.6/781-16-v6.13-net-phy-realtek-change-order-of-calls-in-C22-read_st.patch new file mode 100644 index 0000000000..be7136b375 --- /dev/null +++ b/target/linux/generic/backport-6.6/781-16-v6.13-net-phy-realtek-change-order-of-calls-in-C22-read_st.patch @@ -0,0 +1,54 @@ +From 68d5cd09e8919679ce13b85950debea4b2e98e04 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Thu, 10 Oct 2024 14:07:26 +0100 +Subject: [PATCH 4/5] net: phy: realtek: change order of calls in C22 + read_status() + +Always call rtlgen_read_status() first, so genphy_read_status() which +is called by it clears bits in case auto-negotiation has not completed. +Also clear 10GBT link-partner advertisement bits in case auto-negotiation +is disabled or has not completed. + +Suggested-by: Russell King (Oracle) +Signed-off-by: Daniel Golle +Link: https://patch.msgid.link/b15929a41621d215c6b2b57393368086589569ec.1728565530.git.daniel@makrotopia.org +Signed-off-by: Paolo Abeni +--- + drivers/net/phy/realtek.c | 22 +++++++++++++++------- + 1 file changed, 15 insertions(+), 7 deletions(-) + +--- a/drivers/net/phy/realtek.c ++++ b/drivers/net/phy/realtek.c +@@ -949,17 +949,25 @@ static void rtl822xb_update_interface(st + + static int rtl822x_read_status(struct phy_device *phydev) + { +- if (phydev->autoneg == AUTONEG_ENABLE) { +- int lpadv = phy_read_paged(phydev, 0xa5d, 0x13); ++ int lpadv, ret; + +- if (lpadv < 0) +- return lpadv; ++ ret = rtlgen_read_status(phydev); ++ if (ret < 0) ++ return ret; + +- mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, +- lpadv); ++ if (phydev->autoneg == AUTONEG_DISABLE || ++ !phydev->autoneg_complete) { ++ mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, 0); ++ return 0; + } + +- return rtlgen_read_status(phydev); ++ lpadv = phy_read_paged(phydev, 0xa5d, 0x13); ++ if (lpadv < 0) ++ return lpadv; ++ ++ mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, lpadv); ++ ++ return 0; + } + + static int rtl822xb_read_status(struct phy_device *phydev) diff --git a/target/linux/generic/backport-6.6/781-17-v6.13-net-phy-realtek-clear-1000Base-T-link-partner-advert.patch b/target/linux/generic/backport-6.6/781-17-v6.13-net-phy-realtek-clear-1000Base-T-link-partner-advert.patch new file mode 100644 index 0000000000..3847d5803a --- /dev/null +++ b/target/linux/generic/backport-6.6/781-17-v6.13-net-phy-realtek-clear-1000Base-T-link-partner-advert.patch @@ -0,0 +1,30 @@ +From 5cb409b3960e75467cbb0a8e1e5596b4490570e3 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Thu, 10 Oct 2024 14:07:39 +0100 +Subject: [PATCH 5/5] net: phy: realtek: clear 1000Base-T link partner + advertisement + +Clear 1000Base-T link partner advertisement bits in Clause-45 +read_status() function in case auto-negotiation is disabled or has not +been completed. + +Signed-off-by: Daniel Golle +Link: https://patch.msgid.link/9dc9b47b2d675708afef3ad366bfd78eb584d958.1728565530.git.daniel@makrotopia.org +Signed-off-by: Paolo Abeni +--- + drivers/net/phy/realtek.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/net/phy/realtek.c ++++ b/drivers/net/phy/realtek.c +@@ -1026,6 +1026,10 @@ static int rtl822x_c45_read_status(struc + if (ret < 0) + return ret; + ++ if (phydev->autoneg == AUTONEG_DISABLE || ++ !genphy_c45_aneg_done(phydev)) ++ mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, 0); ++ + /* Vendor register as C45 has no standardized support for 1000BaseT */ + if (phydev->autoneg == AUTONEG_ENABLE) { + val = phy_read_mmd(phydev, MDIO_MMD_VEND2, diff --git a/target/linux/generic/pending-6.6/720-01-net-phy-realtek-use-genphy_soft_reset-for-2.5G-PHYs.patch b/target/linux/generic/pending-6.6/720-01-net-phy-realtek-use-genphy_soft_reset-for-2.5G-PHYs.patch index fe8ee7b5fa..2b77b6e02f 100644 --- a/target/linux/generic/pending-6.6/720-01-net-phy-realtek-use-genphy_soft_reset-for-2.5G-PHYs.patch +++ b/target/linux/generic/pending-6.6/720-01-net-phy-realtek-use-genphy_soft_reset-for-2.5G-PHYs.patch @@ -15,7 +15,7 @@ Signed-off-by: Daniel Golle --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c -@@ -1325,6 +1325,7 @@ static struct phy_driver realtek_drvs[] +@@ -1375,6 +1375,7 @@ static struct phy_driver realtek_drvs[] }, { .name = "RTL8226 2.5Gbps PHY", .match_phy_device = rtl8226_match_phy_device, @@ -23,7 +23,7 @@ Signed-off-by: Daniel Golle .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, .read_status = rtl822x_read_status, -@@ -1337,6 +1338,7 @@ static struct phy_driver realtek_drvs[] +@@ -1387,6 +1388,7 @@ static struct phy_driver realtek_drvs[] }, { PHY_ID_MATCH_EXACT(0x001cc840), .name = "RTL8226B_RTL8221B 2.5Gbps PHY", @@ -31,7 +31,7 @@ Signed-off-by: Daniel Golle .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, .config_init = rtl822xb_config_init, -@@ -1351,6 +1353,7 @@ static struct phy_driver realtek_drvs[] +@@ -1401,6 +1403,7 @@ static struct phy_driver realtek_drvs[] }, { PHY_ID_MATCH_EXACT(0x001cc838), .name = "RTL8226-CG 2.5Gbps PHY", @@ -39,7 +39,7 @@ Signed-off-by: Daniel Golle .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, .read_status = rtl822x_read_status, -@@ -1361,6 +1364,7 @@ static struct phy_driver realtek_drvs[] +@@ -1411,6 +1414,7 @@ static struct phy_driver realtek_drvs[] }, { PHY_ID_MATCH_EXACT(0x001cc848), .name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY", @@ -47,7 +47,7 @@ Signed-off-by: Daniel Golle .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, .config_init = rtl822xb_config_init, -@@ -1373,6 +1377,7 @@ static struct phy_driver realtek_drvs[] +@@ -1423,6 +1427,7 @@ static struct phy_driver realtek_drvs[] }, { .match_phy_device = rtl8221b_vb_cg_c22_match_phy_device, .name = "RTL8221B-VB-CG 2.5Gbps PHY (C22)", @@ -55,7 +55,7 @@ Signed-off-by: Daniel Golle .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, .config_init = rtl822xb_config_init, -@@ -1385,6 +1390,7 @@ static struct phy_driver realtek_drvs[] +@@ -1435,6 +1440,7 @@ static struct phy_driver realtek_drvs[] }, { .match_phy_device = rtl8221b_vb_cg_c45_match_phy_device, .name = "RTL8221B-VB-CG 2.5Gbps PHY (C45)", @@ -63,7 +63,7 @@ Signed-off-by: Daniel Golle .config_init = rtl822xb_config_init, .get_rate_matching = rtl822xb_get_rate_matching, .get_features = rtl822x_c45_get_features, -@@ -1395,6 +1401,7 @@ static struct phy_driver realtek_drvs[] +@@ -1445,6 +1451,7 @@ static struct phy_driver realtek_drvs[] }, { .match_phy_device = rtl8221b_vn_cg_c22_match_phy_device, .name = "RTL8221B-VM-CG 2.5Gbps PHY (C22)", @@ -71,7 +71,7 @@ Signed-off-by: Daniel Golle .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, .config_init = rtl822xb_config_init, -@@ -1407,6 +1414,7 @@ static struct phy_driver realtek_drvs[] +@@ -1457,6 +1464,7 @@ static struct phy_driver realtek_drvs[] }, { .match_phy_device = rtl8221b_vn_cg_c45_match_phy_device, .name = "RTL8221B-VN-CG 2.5Gbps PHY (C45)", diff --git a/target/linux/generic/pending-6.6/720-02-net-phy-realtek-disable-SGMII-in-band-AN-for-2-5G-PHYs.patch b/target/linux/generic/pending-6.6/720-02-net-phy-realtek-disable-SGMII-in-band-AN-for-2-5G-PHYs.patch index 0c729acb7f..cbef74d317 100644 --- a/target/linux/generic/pending-6.6/720-02-net-phy-realtek-disable-SGMII-in-band-AN-for-2-5G-PHYs.patch +++ b/target/linux/generic/pending-6.6/720-02-net-phy-realtek-disable-SGMII-in-band-AN-for-2-5G-PHYs.patch @@ -20,7 +20,7 @@ Signed-off-by: Daniel Golle --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c -@@ -786,8 +786,8 @@ static int rtl822x_write_mmd(struct phy_ +@@ -814,8 +814,8 @@ static int rtl822x_write_mmd(struct phy_ static int rtl822xb_config_init(struct phy_device *phydev) { bool has_2500, has_sgmii; @@ -30,7 +30,7 @@ Signed-off-by: Daniel Golle has_2500 = test_bit(PHY_INTERFACE_MODE_2500BASEX, phydev->host_interfaces) || -@@ -837,7 +837,29 @@ static int rtl822xb_config_init(struct p +@@ -865,7 +865,29 @@ static int rtl822xb_config_init(struct p if (ret < 0) return ret; diff --git a/target/linux/generic/pending-6.6/720-03-net-phy-realtek-make-sure-paged-read-is-protected-by.patch b/target/linux/generic/pending-6.6/720-03-net-phy-realtek-make-sure-paged-read-is-protected-by.patch index 8b8dca8f27..216fa918e1 100644 --- a/target/linux/generic/pending-6.6/720-03-net-phy-realtek-make-sure-paged-read-is-protected-by.patch +++ b/target/linux/generic/pending-6.6/720-03-net-phy-realtek-make-sure-paged-read-is-protected-by.patch @@ -18,7 +18,7 @@ Signed-off-by: Daniel Golle --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c -@@ -1052,9 +1052,11 @@ static bool rtlgen_supports_2_5gbps(stru +@@ -1092,9 +1092,11 @@ static bool rtlgen_supports_2_5gbps(stru { int val; diff --git a/target/linux/generic/pending-6.6/720-04-net-phy-realtek-introduce-rtl822x_probe.patch b/target/linux/generic/pending-6.6/720-04-net-phy-realtek-introduce-rtl822x_probe.patch index 7350d3affc..08c13f34e4 100644 --- a/target/linux/generic/pending-6.6/720-04-net-phy-realtek-introduce-rtl822x_probe.patch +++ b/target/linux/generic/pending-6.6/720-04-net-phy-realtek-introduce-rtl822x_probe.patch @@ -13,9 +13,9 @@ Signed-off-by: Daniel Golle --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c -@@ -82,6 +82,10 @@ +@@ -80,6 +80,10 @@ - #define RTL822X_VND2_PHYSR 0xa434 + #define RTL822X_VND2_GANLPAR 0xa414 +#define RTL8221B_PHYCR1 0xa430 +#define RTL8221B_PHYCR1_ALDPS_EN BIT(2) @@ -24,8 +24,8 @@ Signed-off-by: Daniel Golle #define RTL8366RB_POWER_SAVE 0x15 #define RTL8366RB_POWER_SAVE_ON BIT(12) -@@ -1102,6 +1106,25 @@ static int rtl8221b_vn_cg_c45_match_phy_ - return rtlgen_is_c45_match(phydev, RTL_8221B_VN_CG, true); +@@ -1152,6 +1156,25 @@ static int rtl8251b_c45_match_phy_device + return rtlgen_is_c45_match(phydev, RTL_8251B, true); } +static int rtl822x_probe(struct phy_device *phydev) @@ -50,7 +50,7 @@ Signed-off-by: Daniel Golle static int rtlgen_resume(struct phy_device *phydev) { int ret = genphy_resume(phydev); -@@ -1377,6 +1400,7 @@ static struct phy_driver realtek_drvs[] +@@ -1427,6 +1450,7 @@ static struct phy_driver realtek_drvs[] }, { PHY_ID_MATCH_EXACT(0x001cc838), .name = "RTL8226-CG 2.5Gbps PHY", @@ -58,7 +58,7 @@ Signed-off-by: Daniel Golle .soft_reset = genphy_soft_reset, .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, -@@ -1388,6 +1412,7 @@ static struct phy_driver realtek_drvs[] +@@ -1438,6 +1462,7 @@ static struct phy_driver realtek_drvs[] }, { PHY_ID_MATCH_EXACT(0x001cc848), .name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY", @@ -66,7 +66,7 @@ Signed-off-by: Daniel Golle .soft_reset = genphy_soft_reset, .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, -@@ -1401,6 +1426,7 @@ static struct phy_driver realtek_drvs[] +@@ -1451,6 +1476,7 @@ static struct phy_driver realtek_drvs[] }, { .match_phy_device = rtl8221b_vb_cg_c22_match_phy_device, .name = "RTL8221B-VB-CG 2.5Gbps PHY (C22)", @@ -74,7 +74,7 @@ Signed-off-by: Daniel Golle .soft_reset = genphy_soft_reset, .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, -@@ -1414,6 +1440,7 @@ static struct phy_driver realtek_drvs[] +@@ -1464,6 +1490,7 @@ static struct phy_driver realtek_drvs[] }, { .match_phy_device = rtl8221b_vb_cg_c45_match_phy_device, .name = "RTL8221B-VB-CG 2.5Gbps PHY (C45)", @@ -82,7 +82,7 @@ Signed-off-by: Daniel Golle .soft_reset = genphy_soft_reset, .config_init = rtl822xb_config_init, .get_rate_matching = rtl822xb_get_rate_matching, -@@ -1425,6 +1452,7 @@ static struct phy_driver realtek_drvs[] +@@ -1475,6 +1502,7 @@ static struct phy_driver realtek_drvs[] }, { .match_phy_device = rtl8221b_vn_cg_c22_match_phy_device, .name = "RTL8221B-VM-CG 2.5Gbps PHY (C22)", @@ -90,7 +90,7 @@ Signed-off-by: Daniel Golle .soft_reset = genphy_soft_reset, .get_features = rtl822x_get_features, .config_aneg = rtl822x_config_aneg, -@@ -1438,6 +1466,7 @@ static struct phy_driver realtek_drvs[] +@@ -1488,6 +1516,7 @@ static struct phy_driver realtek_drvs[] }, { .match_phy_device = rtl8221b_vn_cg_c45_match_phy_device, .name = "RTL8221B-VN-CG 2.5Gbps PHY (C45)", diff --git a/target/linux/generic/pending-6.6/720-05-net-phy-realtek-detect-early-version-of-RTL8221B.patch b/target/linux/generic/pending-6.6/720-05-net-phy-realtek-detect-early-version-of-RTL8221B.patch index 204d7a0414..6938552d14 100644 --- a/target/linux/generic/pending-6.6/720-05-net-phy-realtek-detect-early-version-of-RTL8221B.patch +++ b/target/linux/generic/pending-6.6/720-05-net-phy-realtek-detect-early-version-of-RTL8221B.patch @@ -14,7 +14,7 @@ Signed-off-by: Daniel Golle Signed-off-by: Mieczyslaw Nalewaj --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c -@@ -1080,10 +1080,32 @@ static int rtl8226_match_phy_device(stru +@@ -1120,10 +1120,32 @@ static int rtl8226_match_phy_device(stru static int rtlgen_is_c45_match(struct phy_device *phydev, unsigned int id, bool is_c45) { diff --git a/target/linux/generic/pending-6.6/720-06-net-phy-realtek-support-interrupt-of-RTL8221B.patch b/target/linux/generic/pending-6.6/720-06-net-phy-realtek-support-interrupt-of-RTL8221B.patch index 0ae7b385cd..a796b8f011 100644 --- a/target/linux/generic/pending-6.6/720-06-net-phy-realtek-support-interrupt-of-RTL8221B.patch +++ b/target/linux/generic/pending-6.6/720-06-net-phy-realtek-support-interrupt-of-RTL8221B.patch @@ -12,7 +12,7 @@ Signed-off-by: Jianhui Zhao --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c -@@ -1282,6 +1282,51 @@ static irqreturn_t rtl9000a_handle_inter +@@ -1332,6 +1332,51 @@ static irqreturn_t rtl9000a_handle_inter return IRQ_HANDLED; } @@ -64,7 +64,7 @@ Signed-off-by: Jianhui Zhao static struct phy_driver realtek_drvs[] = { { PHY_ID_MATCH_EXACT(0x00008201), -@@ -1448,6 +1493,8 @@ static struct phy_driver realtek_drvs[] +@@ -1498,6 +1543,8 @@ static struct phy_driver realtek_drvs[] }, { .match_phy_device = rtl8221b_vb_cg_c22_match_phy_device, .name = "RTL8221B-VB-CG 2.5Gbps PHY (C22)", @@ -73,7 +73,7 @@ Signed-off-by: Jianhui Zhao .probe = rtl822x_probe, .soft_reset = genphy_soft_reset, .get_features = rtl822x_get_features, -@@ -1462,6 +1509,8 @@ static struct phy_driver realtek_drvs[] +@@ -1512,6 +1559,8 @@ static struct phy_driver realtek_drvs[] }, { .match_phy_device = rtl8221b_vb_cg_c45_match_phy_device, .name = "RTL8221B-VB-CG 2.5Gbps PHY (C45)", @@ -82,7 +82,7 @@ Signed-off-by: Jianhui Zhao .probe = rtl822x_probe, .soft_reset = genphy_soft_reset, .config_init = rtl822xb_config_init, -@@ -1474,6 +1523,8 @@ static struct phy_driver realtek_drvs[] +@@ -1524,6 +1573,8 @@ static struct phy_driver realtek_drvs[] }, { .match_phy_device = rtl8221b_vn_cg_c22_match_phy_device, .name = "RTL8221B-VM-CG 2.5Gbps PHY (C22)", @@ -91,7 +91,7 @@ Signed-off-by: Jianhui Zhao .probe = rtl822x_probe, .soft_reset = genphy_soft_reset, .get_features = rtl822x_get_features, -@@ -1488,6 +1539,8 @@ static struct phy_driver realtek_drvs[] +@@ -1538,6 +1589,8 @@ static struct phy_driver realtek_drvs[] }, { .match_phy_device = rtl8221b_vn_cg_c45_match_phy_device, .name = "RTL8221B-VN-CG 2.5Gbps PHY (C45)", diff --git a/target/linux/generic/pending-6.6/720-07-net-phy-realtek-read-duplex-and-gbit-master-from-PHY.patch b/target/linux/generic/pending-6.6/720-07-net-phy-realtek-read-duplex-and-gbit-master-from-PHY.patch deleted file mode 100644 index d609d596af..0000000000 --- a/target/linux/generic/pending-6.6/720-07-net-phy-realtek-read-duplex-and-gbit-master-from-PHY.patch +++ /dev/null @@ -1,117 +0,0 @@ -From 66d82d3f04623e9c096e12c10ca51141c345ee84 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Tue, 8 Oct 2024 20:59:51 +0100 -Subject: [PATCH] net: phy: realtek: read duplex and gbit master from PHYSR - register - -The PHYSR MMD register is present and defined equally for all RTL82xx -Ethernet PHYs. -Read duplex and gbit master bits from rtlgen_decode_speed() and rename -it to rtlgen_decode_physr(). - -Signed-off-by: Daniel Golle ---- - drivers/net/phy/realtek.c | 48 ++++++++++++++++++++++++++++++++------- - 1 file changed, 40 insertions(+), 8 deletions(-) - ---- a/drivers/net/phy/realtek.c -+++ b/drivers/net/phy/realtek.c -@@ -80,20 +80,24 @@ - - #define RTL822X_VND2_GANLPAR 0xa414 - --#define RTL822X_VND2_PHYSR 0xa434 -- - #define RTL8221B_PHYCR1 0xa430 - #define RTL8221B_PHYCR1_ALDPS_EN BIT(2) - #define RTL8221B_PHYCR1_ALDPS_XTAL_OFF_EN BIT(12) - -+#define RTL_VND2_PHYSR 0xa434 -+#define RTL_VND2_PHYSR_LINK BIT(2) -+#define RTL_VND2_PHYSR_DUPLEX BIT(3) -+#define RTL_VND2_PHYSR_SPEEDL GENMASK(5, 4) -+#define RTL_VND2_PHYSR_SPEEDH GENMASK(10, 9) -+#define RTL_VND2_PHYSR_MASTER BIT(11) -+#define RTL_VND2_PHYSR_SPEED_MASK (RTL_VND2_PHYSR_SPEEDL | RTL_VND2_PHYSR_SPEEDH) -+ - #define RTL8366RB_POWER_SAVE 0x15 - #define RTL8366RB_POWER_SAVE_ON BIT(12) - - #define RTL9000A_GINMR 0x14 - #define RTL9000A_GINMR_LINK_STATUS BIT(4) - --#define RTLGEN_SPEED_MASK 0x0630 -- - #define RTL_GENERIC_PHYID 0x001cc800 - #define RTL_8211FVD_PHYID 0x001cc878 - #define RTL_8221B_VB_CG 0x001cc849 -@@ -661,9 +665,24 @@ static int rtl8366rb_config_init(struct - } - - /* get actual speed to cover the downshift case */ --static void rtlgen_decode_speed(struct phy_device *phydev, int val) -+static void rtlgen_decode_physr(struct phy_device *phydev, int val) - { -- switch (val & RTLGEN_SPEED_MASK) { -+ /* bit 2 -+ * 0: Link not OK -+ * 1: Link OK -+ */ -+ phydev->link = !!(val & RTL_VND2_PHYSR_LINK); -+ -+ /* bit 3 -+ * 0: Half Duplex -+ * 1: Full Duplex -+ */ -+ if (val & RTL_VND2_PHYSR_DUPLEX) -+ phydev->duplex = DUPLEX_FULL; -+ else -+ phydev->duplex = DUPLEX_HALF; -+ -+ switch (val & RTL_VND2_PHYSR_SPEED_MASK) { - case 0x0000: - phydev->speed = SPEED_10; - break; -@@ -685,6 +704,19 @@ static void rtlgen_decode_speed(struct p - default: - break; - } -+ -+ /* bit 11 -+ * 0: Slave Mode -+ * 1: Master Mode -+ */ -+ if (phydev->speed >= 1000) { -+ if (val & RTL_VND2_PHYSR_MASTER) -+ phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER; -+ else -+ phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE; -+ } else { -+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED; -+ } - } - - static int rtlgen_read_status(struct phy_device *phydev) -@@ -702,7 +734,7 @@ static int rtlgen_read_status(struct phy - if (val < 0) - return val; - -- rtlgen_decode_speed(phydev, val); -+ rtlgen_decode_physr(phydev, val); - - return 0; - } -@@ -1030,11 +1062,11 @@ static int rtl822x_c45_read_status(struc - return 0; - - /* Read actual speed from vendor register. */ -- val = phy_read_mmd(phydev, MDIO_MMD_VEND2, RTL822X_VND2_PHYSR); -+ val = phy_read_mmd(phydev, MDIO_MMD_VEND2, RTL_VND2_PHYSR); - if (val < 0) - return val; - -- rtlgen_decode_speed(phydev, val); -+ rtlgen_decode_physr(phydev, val); - - return 0; - } diff --git a/target/linux/generic/pending-6.6/720-08-net-phy-realtek-change-order-of-calls-in-C22-read_st.patch b/target/linux/generic/pending-6.6/720-08-net-phy-realtek-change-order-of-calls-in-C22-read_st.patch deleted file mode 100644 index 8a7ad8afa8..0000000000 --- a/target/linux/generic/pending-6.6/720-08-net-phy-realtek-change-order-of-calls-in-C22-read_st.patch +++ /dev/null @@ -1,51 +0,0 @@ -From eaca24de0c0e64145c130759207da32594d2e5d1 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Tue, 8 Oct 2024 21:05:47 +0100 -Subject: [PATCH 2/3] net: phy: realtek: change order of calls in C22 - read_status() - -Always call rtlgen_read_status() first, so genphy_read_status() which -is called by it clears bits in case auto-negotiation has not completed. -Also clear 10GBT link-partner advertisement bits in case auto-negotiation -is disabled or has not completed. - -Signed-off-by: Daniel Golle ---- - drivers/net/phy/realtek.c | 22 +++++++++++++++------- - 1 file changed, 15 insertions(+), 7 deletions(-) - ---- a/drivers/net/phy/realtek.c -+++ b/drivers/net/phy/realtek.c -@@ -979,17 +979,25 @@ static void rtl822xb_update_interface(st - - static int rtl822x_read_status(struct phy_device *phydev) - { -- if (phydev->autoneg == AUTONEG_ENABLE) { -- int lpadv = phy_read_paged(phydev, 0xa5d, 0x13); -+ int lpadv, ret; - -- if (lpadv < 0) -- return lpadv; -+ ret = rtlgen_read_status(phydev); -+ if (ret < 0) -+ return ret; - -- mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, -- lpadv); -+ if (phydev->autoneg == AUTONEG_DISABLE || -+ !phydev->autoneg_complete) { -+ mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, 0); -+ return 0; - } - -- return rtlgen_read_status(phydev); -+ lpadv = phy_read_paged(phydev, 0xa5d, 0x13); -+ if (lpadv < 0) -+ return lpadv; -+ -+ mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, lpadv); -+ -+ return 0; - } - - static int rtl822xb_read_status(struct phy_device *phydev) diff --git a/target/linux/generic/pending-6.6/720-09-net-phy-realtek-clear-1000Base-T-link-partner-advert.patch b/target/linux/generic/pending-6.6/720-09-net-phy-realtek-clear-1000Base-T-link-partner-advert.patch deleted file mode 100644 index 824be84c68..0000000000 --- a/target/linux/generic/pending-6.6/720-09-net-phy-realtek-clear-1000Base-T-link-partner-advert.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 8b137d1e405dc90300ba577db44c70f0e026636e Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Tue, 8 Oct 2024 21:09:19 +0100 -Subject: [PATCH 3/3] net: phy: realtek: clear 1000Base-T link partner - advertisement - -Clear 1000Base-T link partner advertisement bits in Clause-45 -read_status() function in case auto-negotiation is disabled or has not -been completed. - -Signed-off-by: Daniel Golle ---- - drivers/net/phy/realtek.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/net/phy/realtek.c -+++ b/drivers/net/phy/realtek.c -@@ -1056,6 +1056,10 @@ static int rtl822x_c45_read_status(struc - if (ret < 0) - return ret; - -+ if (phydev->autoneg == AUTONEG_DISABLE || -+ !genphy_c45_aneg_done(phydev)) -+ mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, 0); -+ - /* Vendor register as C45 has no standardized support for 1000BaseT */ - if (phydev->autoneg == AUTONEG_ENABLE) { - val = phy_read_mmd(phydev, MDIO_MMD_VEND2,