From: oscardagrach Date: Wed, 17 Jan 2018 20:35:30 +0000 (-0600) Subject: arm64: dts: hikey: Enable HS200 mode on eMMC X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=abd7d0972a19;p=openwrt%2Fstaging%2Fblogic.git arm64: dts: hikey: Enable HS200 mode on eMMC According to the hi6220 datasheet, the MMC controller is JEDEC eMMC 4.5 compliant, in addition to supporting a clock of up to 150MHz. The Hikey schematic also indicates the device utilizes 1.8v signaling. Define these parameters in the device tree to enable HS200 mode. Signed-off-by: Ryan Grachek Signed-off-by: Wei Xu --- diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index e94fa1a53192..94e74c056014 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -299,7 +299,9 @@ /* GPIO blocks 16 thru 19 do not appear to be routed to pins */ dwmmc_0: dwmmc0@f723d000 { + max-frequency = <150000000>; cap-mmc-highspeed; + mmc-hs200-1_8v; non-removable; bus-width = <0x8>; vmmc-supply = <&ldo19>;