From: Gabor Juhos Date: Sat, 5 May 2012 17:02:35 +0000 (+0000) Subject: ar71xx: add support for the TP-Link TL-WR1041N v2 board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ab897ab04e6795c7b23860505cdae92d5641c312;p=openwrt%2Fstaging%2Fneocturne.git ar71xx: add support for the TP-Link TL-WR1041N v2 board Patch-by: Vince Huang SVN-Revision: 31608 --- diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index c6f2cf79ba..6cee29f3e8 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -112,6 +112,7 @@ get_status_led() { tl-mr3420 | \ tl-wa901nd | \ tl-wa901nd-v2 | \ + tl-wr1041n-v2 | \ tl-wr1043nd | \ tl-wr741nd | \ tl-wr741nd-v4 | \ diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds index c8edcae480..2ec67cb695 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds @@ -188,7 +188,8 @@ tl-wr741nd-v4) set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" ;; -tl-wr941nd) +tl-wr941nd | \ +tl-wr1041n-v2) set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/network b/target/linux/ar71xx/base-files/etc/uci-defaults/network index 3863705f86..3fbb9fccaa 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/network @@ -89,6 +89,13 @@ ap113) ucidef_add_switch_vlan "eth0" "2" "0t 2" ;; +tl-wr1041n-v2) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "eth0" "1" "1" + ucidef_add_switch_vlan "eth0" "1" "0t 2 3 4 5" + ucidef_add_switch_vlan "eth0" "2" "0t 1" + ;; + tl-wr1043nd) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "rtl8366rb" "1" "1" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 3802e12179..35eca7c81c 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -97,6 +97,9 @@ tplink_board_detect() { "094100"*) model="TP-Link TL-WR941N/ND" ;; + "104100"*) + model="TP-Link TL-WR1041N/ND" + ;; "104300"*) model="TP-Link TL-WR1043N/ND" ;; @@ -274,6 +277,9 @@ ar71xx_board_detect() { *TEW-673GRU) name="tew-673gru" ;; + *"TL-WR1041N v2") + name="tl-wr1041n-v2" + ;; *TL-WR1043ND) name="tl-wr1043nd" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index a53c73dca4..a3295ed5fc 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -136,6 +136,7 @@ platform_check_image() { tl-wr841n-v1 | \ tl-wr841n-v7 | \ tl-wr941nd | \ + tl-wr1041n-v2 | \ tl-wr1043nd | \ tl-wr2543n) [ "$magic" != "0100" ] && { diff --git a/target/linux/ar71xx/config-3.3 b/target/linux/ar71xx/config-3.3 index 861ce14601..344c5e8c48 100644 --- a/target/linux/ar71xx/config-3.3 +++ b/target/linux/ar71xx/config-3.3 @@ -57,6 +57,7 @@ CONFIG_ATH79_MACH_TL_MR3020=y CONFIG_ATH79_MACH_TL_MR3X20=y CONFIG_ATH79_MACH_TL_WA901ND=y CONFIG_ATH79_MACH_TL_WA901ND_V2=y +CONFIG_ATH79_MACH_TL_WR1041N_V2=y CONFIG_ATH79_MACH_TL_WR1043ND=y CONFIG_ATH79_MACH_TL_WR2543N=y CONFIG_ATH79_MACH_TL_WR703N=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c new file mode 100644 index 0000000000..ed5b2b0e63 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c @@ -0,0 +1,154 @@ +/* + * TP-LINK TL-WR1041 v2 board support + * + * Copyright (C) 2010-2012 Gabor Juhos + * Copyright (C) 2011-2012 Anan Huang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define TL_WR1041NV2_GPIO_BTN_RESET 14 +#define TL_WR1041NV2_GPIO_LED_WPS 13 +#define TL_WR1041NV2_GPIO_LED_WLAN 11 + +#define TL_WR1041NV2_GPIO_LED_SYSTEM 12 + +#define TL_WR1041NV2_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1041NV2_KEYS_POLL_INTERVAL) + +#define TL_WR1041NV2_PCIE_CALDATA_OFFSET 0x5000 + +static const char *tl_wr1041nv2_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr1041nv2_flash_data = { + .part_probes = tl_wr1041nv2_part_probes, +}; + +static struct gpio_led tl_wr1041nv2_leds_gpio[] __initdata = { + { + .name = "tp-link:green:system", + .gpio = TL_WR1041NV2_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:wps", + .gpio = TL_WR1041NV2_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "tp-link:green:wlan", + .gpio = TL_WR1041NV2_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_wr1041nv2_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR1041NV2_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_platform_data db120_ar8327_data = { + .pad0_cfg = &db120_ar8327_pad0_cfg, + .cpuport_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + } +}; + +static struct mdio_board_info db120_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &db120_ar8327_data, + }, +}; + +static void __init db120_gmac_setup(void) +{ + void __iomem *base; + u32 t; + + base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE); + + t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG); + t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 | + AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE); + t |= AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE; + + __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG); + + iounmap(base); +} + +static void __init tl_wr1041nv2_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(&tl_wr1041nv2_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1041nv2_leds_gpio), + tl_wr1041nv2_leds_gpio); + ath79_register_gpio_keys_polled(-1, TL_WR1041NV2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr1041nv2_gpio_keys), + tl_wr1041nv2_gpio_keys); + ath79_register_wmac(ee, mac); + + db120_gmac_setup(); + + ath79_register_mdio(1, 0x0); + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); + + mdiobus_register_board_info(db120_mdio0_info, + ARRAY_SIZE(db120_mdio0_info)); + + /* GMAC0 is connected to an AR8327 switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_TL_WR1041N_V2, "TL-WR1041N-v2", + "TP-LINK TL-WR1041N v2", tl_wr1041nv2_setup); diff --git a/target/linux/ar71xx/patches-3.3/615-MIPS-ath79-WR1041N-support.patch b/target/linux/ar71xx/patches-3.3/615-MIPS-ath79-WR1041N-support.patch new file mode 100644 index 0000000000..f1936c0cca --- /dev/null +++ b/target/linux/ar71xx/patches-3.3/615-MIPS-ath79-WR1041N-support.patch @@ -0,0 +1,40 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -451,6 +451,17 @@ config ATH79_MACH_TL_WR941ND + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + ++config ATH79_MACH_TL_WR1041N_V2 ++ bool "TP-LINK TL-WR1041N v2 support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_TL_WR1043ND + bool "TP-LINK TL-WR1043ND support" + select SOC_AR913X +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -64,6 +64,7 @@ enum ath79_mach_type { + ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ + ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ + ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ ++ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ + ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */ + ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */ + ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */ +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -74,6 +74,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += m + obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o + obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o + obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o ++obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o + obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o + obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o + obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o